Supply Post March 2020 by Supply Post Newspaper

CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER · SUPPLYPOST.COM

Family Owned Since 1971

VOL. 49 · NO. 3

Scan for more info

MARCH 2020

2011 JOHN DEERE 844K

2017 HYUNDAI HL757TM-9A

2014 JCB 514-56 TELEHANDLER

2005 CAT 777D

10163 hours, bucket, scales, 29.5 tires. Located Terrace, BC. See page 44 for more info.

Rough terrain forklift, 22,000 lb lift, 178 HP Cummins 6.7 diesel, 200 hours. P.O.R. See page 43 for more info.

14,000 lbs. Capacity w/ 56’ Reach, Low Hours, Like New Condition. $132,500. See pg. 45.

29,000 frame hrs., 10,000 hrs. on CAT Reman engine & torque. Flat floor body. Transport ready. Asking $325,000 CAD See pg. 46.

BRANDT PHONE: (888) 2-BRANDT

WOODLAND EQUIPMENT 250-372-2855

XTREME RENTALS · 604-841-6381 sales@xtremerents.com

BRIKERS 855-285-1115 · sales@brikers.com

Intelligent By Design

COURTESY CH EXCAVATING

London, Ontario’s CH Excavating realizes improvements in productivity and cost savings with Komatsu’s Intelligent Machine Control system. Read more on page 60.

HEAVY EQUIPMENT

PARTS

REBUILT. IN STOCK. READY TO SHIP. 1.855.285.1115

Page 2

Supply Post · supplypost.com

March 2020

RENTALS • SALES • CONTRACTING SALES & RENTALS: Dave 778-855-4190 dave@unitedearthcontractors.com OFFICE: 604-940-0001 | Fax 604-940-0005

SALE PRICE $74,000 ea.

$90,000 ea. 1 OF 2 UNITS AVAILABLE. 2007 KOMATSU HM 300-2 Approx.11-12 k hrs on each. Good runners, ready to work.

$59,000 JD 350D, thumb, guarded, catwalks, 12K hours.

SALE PRICE $94,000 EA 1 of 2 - JD 450D, thumb, guarded, catwalks, 2 buckets 12K hours. NG

L SA

N PE

$79,900 2003 CAT 140H MOTOR GRADER 9,200 hrs, tires at 90% plus. This is one great unit and ready to work.

2006 FINLAY 883 SCREENING PLANT SALE $93,000

SOLD 2011 EASYSTAK 80’ TRACK CONVEYOR $75,000 2003 VIBROMAX 84” Padfoot compactor Stk# CP140 ..................................................... $30,000. 2012 VIBROMAX VM 132 84” roller 3500 hrs Stk # CP212 ....................................................SOLD $50,000. 2001 VIBROMAX w1105PD padfoot compactor 4000 hrs Stk # CP208 .................................... $34,000. 2008 BOMAG BW211D-40 compactor Stk# CP88 ....................................................... $45,000. 2001 CAT CP563D compactor 6600 hrs Stk# CP210 .................................................... $40,000. 2000 INGERSOLL-RAND 84” compactor Stk# CP206 .................................................... $34,000. 2007 LINK-BELT 290 X2 EXCAVATOR 11000 hrs Stock # EX214 ............................... $84,000. 2012 CAT 336EL EXCAVATOR 8500 hrs Stk# EX222 .................................................. $165,000. 2011 CAT D6K DOZER Stock # DZ162 .. $110,000. 2014 YANMAR SKID-STEER 1200 hrs Stk# LD072 ....................................................SOLD $30,000. 2012 VOLVO A35F ROCK TRUCK 7500 hrs Stk# AT240 ................................................... $230,000. 2012 VOLVO A35F ROCK TRUCK 7100 hrs Stk # AT250 .................................................. $230,000. 2007 CAT 950H LOADER 23k hours Stk # LD074 ................................................... $65,000. 2012 CAT 966H LOADER 15k hours Stk # LD070 .................................................. $140,000. 2001 CAT 980G LOADER Stk# LD174 .... $85,000. 2015 JOHN DEERE 850K LGP CRAWLER TRACTOR 5400 hrs Stk# DZ176 .............. $350,000. 2014 JOHN DEERE 850K WLT CRAWLER TRACTOR 5600 hrs Stk# DZ174 ............... $350,000.

1 OF 4 VOLVO A25C, All in good condition and ready to work Very very clean units.

4 available JD 350G GP & dig bucket, U/C 90%, pads look new. Starting at $150,000.

$79,000 JOHN DEERE 240D 8,200 hrs, W/B lugging and Q/C, new U/C, Good runner and ready to work.

$105,000 2011 CAT 160M MOTOR GRADER 13,000 hrs, tires at 85% and machine is ready to work.

SALE PRICE

$230,000 EA 2014 VOLVO A30F 80% tires, 750/65R25 wide tires, rear camera, approx. 9,000 hours and ready to work. (1 of 2)

$129,000 2008 CAT D6T 6 WAY A/C, diff steer, SystemOne U/C, ripper/forestry pkg avail. hard nose & front end all rebuilt. Only 14,000 hrs. Min. hrs on rebuilt engine.

$75,000 2005 D6R XL U/C 75% good runner, well maintained and ready to work.

$140,000 VOLVO A25F Approx 10k hours, Tailgate , new brakes , new tranny

$145,000 VOLVO A25G 1 OF 6, 3-5K HOURS

CAT 740 ROCK TRUCK C/W Hyd water tank drop in

STARTING AT $300,000.

FIND MORE AT UNITEDEARTHCONTRACTORS.COM

March 2020

Supply Post · Our Readers Are Your Buyers

Page 3

4204 42 Ave., Innisfail, AB

CALL TODAY! 1-844-470-4608

2014 VOLVO MC115C SKID STEER, STK #2389, Enclosed Cab, (Volvo) Diesel, Heat/Air, Aux. Hydraulics, Q/C, ISO/H Pattern Control, 74 HP, 2,700lb Lift, 882 Hrs ................................................................................................$43,000.

2014 CATERPILLAR 246DSKID STEER, STK #1638, Enclosed Cab, (CAT) Diesel, Heat, Air, Ride Control, Hyd. Quick Connect, Positive Air Shut Off, 74 HP, 2,150lb Lift, Counter Weights, 1,135 Hrs ..........................................................$42,500.

2014 CATERPILLAR 262D SKID STEER, STK #1676, Enclosed Cab, (CAT) Diesel, Heat, Air, Ride Control, Hyd. Q/C, Positive Air Shutoff, 74HP, 2,700lb Lift Capacity, Counter Weights, 1,983 Hrs .............................................................................$45,000.

2014 BOBCAT S550 SKID STEER, STK #2353, Enclosed Cab, (Kubota) Diesel, Heat/Air, Aux. Hydraulics, Hand/Foot Controls, 61 HP, 1,750lb Lift, 3,631 Hrs ......................$29,500.

2013 GENIE GTH-5519 TELEHANDLER, STK #2423, 4WD, (Deutz) Diesel, Enclosed Cab, Heat, Aux. Hydraulics, 3-Way Steering, 19’ Lift Hgt., 11’ Horz. Reach, 48” Rotating Carriage w/ Tilt, 63 HP, 5,500lb Lift, 4,320 Hrs...............................$51,500.

2008 GENIE GTH1056 TELEHANDLER, STK #2476, 4WD, (John Deere) Diesel, Encl. Cab, Heat, Aux. Hyd.,121 HP, 56’ Lift Hgt., 42’ Horz. Reach, 3-Way Steering, Swivel Carriage, Outriggers, Counter Weights, 10,000lb Lift, 6,902 Hrs ..............................................................................................$53,500.

2007 SKYTRAK 8042 TELEHANDLER, STK #2312, 4WD, (Cummins) Diesel, Enclosed Cab, Heat, 100 HP, 42’ Lift Hgt., 26’ Horz. Reach, Positive Air Shutoff, Frame Tilt, 3-Way Steering, 8,000lb Lift, 7,740 Hrs......................................$42,500.

2012 XTREME XR1255 TELEHANDLER, STK #2345, 4WD, Enclosed Cab, (Perkins) Diesel, Block Heater, Heat, Fan, Aux. Hyd., 55’ Lift Hgt., 38’ Horz. Reach, 3-Way Steering, Frame Tilt, Outriggers, Pos. Air Shutoff, Counter Weights, 12,000lb Lift, 2,005 Hrs ..........................................................................$102,500.

2012 JLG G10-55A TELEHANDLER, STK #2466, 4WD, (Cummins) Diesel, Encl. Cab, Heat, Air, 125 HP, Aux. Hyd., 55’ Lift Hgt., 42’ Horz. Reach, Positive Air Shutoff, 3-Way Steering, Frame & Carriage Tilt, Counter Weights, Outriggers, 10,000lb Lift, 7,032 Hrs....................................................................$73,500.

2011 JOHN DEERE 544K WHEEL LOADER, STK #2495, (John Deere Diesel), Enclosed Cab, Heat, Air, Heated Seat, 176 HP, 2-Spd., Aux. Hydraulics, Q/C, Positive Air Shutoff, Counter Weights, 10,550 Hrs...........................................$97,500.

2009 CASE 1221E WHEEL LOADER, STK #2351, Enclosed Cab, (Cummins Diesel), 4-Spd., Heat, Air, Ride Control, Emergency Steering, 335 HP, 132” Bucket, 7,340 Hrs ...........................................................................................$131,500.

2008 KOMATSU WA200 WHEEL LOADER, STK #2441, Enclosed Cab, (Komatsu Diesel), Heat, Air, 4-Spd., Aux. Hydraulics, Positive Air Shut Off, Quick Connect, 127 HP, 11,054 Hrs ..............................................................................................$59,500.

2008 CATERPILLAR 287C XPS SKID STEER, STK #2455, (Mitsubishi Diesel), Enclosed Cab, Heat, Air, 2-Spd, Hi Flow, Aux. Hydraulics, Quick Connect, 84 HP, 3,800lb Lift, 4,952 Hrs........................................................................................$33,000.

2017 CATERPILLAR 239D SKID STEER, STK #2435, Enclosed Cab, (Cat) Diesel, Heat, Aux. Hydraulics, Backup Camera, Quick Connect, Hand Control, 67 HP, 2,050lb Radial Lift, 306 Hrs ...............................................................................$59,500.

2017 CATERPILLAR 279D SKID STEER, STK #2223, Enclosed Cab, (CAT) Diesel 3.3L, Heat, Air, 2-Speed, Aux. Hyd., Quick Connect, Ride Control, Hand/Foot Control, 72HP, 3,000lb Lift, 870 Hrs .........................................................................$77,500.

2015 BOBCAT T590 SKID STEER, STK #2436, Enclosed Cab, (Kubota) Diesel, Heat, Air, 2-Speed, Auxiliary Hydraulics, Quick Connect, ISO/H Pattern, 66 HP, 2,100lb Lift, 2,198 Hrs ...........................................................................$39,500.

2005 CATERPILLAR 304CR MINI EXCAVATOR, STK #2457, (Mitsubishi Diesel), Enclosed Cab, Heat, 2-Spd., Aux. Hydraulics, 36 HP, 50” Cleanup Bkt., 11” Tooth Bkt., 78” Blade, 11’ Dig Depth, 4,885 Hrs ................................................$33,500.

2013 TAKEUCHI TB250 MIDI EXCAVATOR, STK #2504, (Yanmar Diesel), Enclosed Cab, Heat, Air, 2Spd., Aux. Hydraulics, Hyd. Thumb, 38 HP, 23” Tooth Bkt., 36” Smooth Bkt., 72” Blade, 11’ Dig Depth, 1,651 Hrs............................$46,500.

2016 TEREX TC16 MINI EXCAVATOR, STK #2383, (Kubota Diesel), Enclosed Cab, Heat, 2-Spd., Counter Weights, ISO Control, 18 HP, 17” Tooth BKt., 53” Blade, 274 Hrs ..............................................................................................$23,500.

2012 TAKEUCHI TB285 MIDI EXCAVATOR, STK #2510, (Yanmar) Diesel, New Engine, Enclosed Cab, Heat, Air, 2-Spd., Aux. Hyd., Hyd. Thumb, 69 HP, 22” Tooth Bkt., 46” Smooth Bkt., 91” Blade, 15’ Dig Depth 3,438 Hrs....................................... $56,500

2011 GENIE S65 STRAIGHT BOOM LIFT, STK #2291 – 4WD (Deutz) Diesel, Block Heater, 65’ Platform Height, 56’ Horizontal Reach, 8’ Platform, Foam Filled Tires, 500lb Lift, 4,301 Hrs..............................................................................$62,500.

2012 GENIE S65 STRAIGHT BOOM LIFT, STK #2289, 4WD, (D) Diesel, Block Heater, 65’ Platform Height, 56’ Horizontal Reach, 8’ Platform, PAS, Foam Filled Tires, 500lb Lift, 3,873 Hrs............................................................................$63,500.

2011 VOLVO BL70 BACKHOE, STK #2309, (Volvo Diesel), 4WD, Enclosed Cab, Heat, Air, Aux. Hydraulics, Outriggers, Extend-A-Hoe, 94 HP, 92” Front Bkt., 21” Rear Dig Bkt., 14’ Dig Depth, 3,239 Hrs................................................................$56,500.

2005 CASE 580M TURBO SII, STK #2236, (Case Family III 445/M2 Diesel), Heat, Air, Extend-a-Hoe, Aux. Hyd., Outriggers, Ride Control, 80 HP, 82” Loader, 17” Tooth Rear Dig, 6,124 Hrs............................$46,500.

FOR COMPLETE INVENTORY www.groundhogsales.com

Page 4

Supply Post · supplypost.com

March 2020

844-945-1523 Dusty@ajaxltd.info

BUY • SELL • CONSIGNMENT 2009 International Bucket Truck, 4 x 4 150,000 kms. READY TO WORK!

$37,500 OBO.

2007 Western Star Combo Tri-drive Vac Truck, Hybon 820XL Blower, Steamer & House Reels.

$95,000 OBO.

2002 Massey Ferguson 8220 Industrial Snow Blower.

$50,000 OBO.

2018 Freightliner Box Van, 24’ Van Body w/ Refer unit, Call for more info

$80,000 OBO.

ASK ABOUT OUR FINANCING OPTIONS

2012 Manac Super B Highboy Trailer, call for more info

2012 Prestige Super B Grain, Fresh CVIP, Call for more info

2013 Lode King 40-ton Scissorneck Trailer, Double Rollers, Fresh CVIP

$35,000 OBO.

$37,500 OBO.

$35,000 OBO.

1998 Tadano 30-ton RT Crane, 7,800 Hrs, Call for more info

$40,000 OBO.

Looking For Something Particular? CALL US TODAY! WE CAN HELP

www.ajaxequipment.ca

March 2020

Supply Post Âˇ Our Readers Are Your Buyers

Page 5

Experience the Progress.

Visit us at:

Conexpo Con/Agg 2020 March 10â€“14, Las Vegas, Nevada, USA Outdoor Booth: Festival Grounds, F5258 Components Booth: South Hall 4, S84231 www.liebherr.com/conexpo

The new generation 8 Liebherr Crawler Excavator R 938 The new generation 8 crawler excavator with greater comfort, better ergonomics and further enhanced performance New Tier 4f engine of 295 HP with diesel oxidation catalyst (DOC), SCR system, diesel particulate filter (DPF) and no EGR valve for lower fuel consumption and higher productivity Optimized levels of machine performance including swing torque, digging and breakout forces; which are among the best on the market, thanks to a thorough redefinition of the various excavator components New uppercarriage and attachment concepts for easy, fast and safe servicing

Liebherr-Canada Ltd. 1015 Sutton Drive, Burlington, Ontario L7L 5Z8 Phone: +1 905 319 9222 E-mail: info.lca@liebherr.com www.facebook.com/LiebherrConstruction www.liebherr.ca

2037-501_002 LFR_139_R938_Gen8_SupplyPost_CAN_GB_06.indd 1

29.01.20 17:24

Page 6

Supply Post · supplypost.com

Riverside Equipment Rentals

March 2020

ADVERTISERS INDEX Ajax Equipment ................... 4 Doosan ............................. 15 Liebherr .............................. 5 Riverside Equipment ............ 6 Alberta Engine ................... 46 Edmonton Trailer ............... 53 Link Parts Ltd. ................... 44 RLC Aggregate ................... 38 Amix Group ....................... 41 Elrus ................................. 40 LiuGong ............................ 10

Rollins .............................. 24

Arrow-West ........................ 13 Equip. Sales & Service ........ 8 LNH Equipment ................. 43 Royquip ............................ 42 Atlantic Heavy Eq. Show .... 26 Expo Grands Travaux ......... 29 Lonetrack Equipment ......... 37

1-800-556-0557 RENTALS | Daryl: 604-309-3980 | daryl@riversideequipment.com SALES | Ernie: 604-854-0583 | ernie@riversideequipment.com

“Locally Owned & Operated”

Saratoga Ventures ............. 18 Banning Equipment ........... 42 FCL Financial..................... 13 LSW Wear Parts ........... 28, 39 B & G Parts ....................... 36 FLO Components ............... 20 Machinery Supply .............. 38

Sennebogen ...................... 11

BK Machinery .................... 20 Foreman Equipment .......... 33 Magnum Attachments........ 29 Sexsmith Used Farm Parts . 41 Brad’s Trucking .................. 46 ForesTech Equipment ........ 20 Major Equipment ............... 45 Skreenquip........................ 34 Brandt.............16, 17, 30, 31 Gear Centre ....................... 24 Mormak ............................ 36 Brandt Truck Rigging .......... 50 Groundhog Sales & Rentals . 3 Morooka ........................... 23

Trak Tech........................... 14 Truck World ....................... 61

Brandt Value Parts............. 25 Groundworx ................. 38, 39 Mountain Forestry Equip. ... 13 True North Equipment ........ 45 Brikers .......................... 1, 14 Handlers Equipment .......... 18 Mountainside Equipment ... 43 Brown International ........... 44 Hope Mechanical .............. 46 Nor Mar Industries ............. 21

WE RENT:

Brutus Truck Bodies ........... 21 Hultdins ............................ 26 Norstone Excavating .......... 26

Twin Deer .......................... 28 Tyalta ................................ 48

Champion Assets ................ 9 Hydrema ............................. 9 Ocean Trailer ..................... 64 United Earth Contractors ...... 2 Chieftain Equipment .... 37, 47 ILA .................................... 59 Pacific Rim Equipment......... 7 Vanderveldt Parts .............. 10 Coastal Pacific Equipment . 42 Inland Equipment .............. 19 PM Industries .................... 51

Van-Ed Equipment ............... 8

Continental Equipment ...... 25 Inland Group ..................... 32 Premium Truck ......56, 57, 58 Wally’s Private Parts .......... 45 Crawler Sales .................... 25 Interior Diesel .................... 47 Prince George Truck ........... 43 Warners HD Parts .............. 46 Darby Mfg. ........................ 14 InterQuip Rentals............... 12 Prolenc ............................. 59 Demo International ............ 24 Jade Equipment .................. 1 P & R Truck Centre ............ 49

Wheeler Equipment ........... 35

Destec .............................. 10 K-Line Trailers ................... 52 Querel Trailers ................... 55 WRT Equipment ................. 36 Dolphin Mechanical ........... 41 Langley Excavator Parts ..... 12 Ritchie Bros....................... 27 Wyatt’s Used Equipment .... 44

NEXT DEADLINE: Friday, March 20, 2020

Scan for more info #105, 26730 - 56th Avenue, Langley, B.C. V4W 3X5

www.supplypost.com

PHONE 604-607-5577 | TOLL FREE 1-800-663-4802

NEW TO THE FLEET

VOLVO A30G

President ........................................... Jeff Watson

Marketing Administration ................... Sheryl Kaye

Account Manager ............................Jake Peterson

Art Director/Social Media ................... Linda Horn

Managing Partner, Finance ............ Debra Watson

Web & Graphic Designer ..................Lisa Schmale

CIRCULATION

Direct Mailed copies .............. 22,300 Newsstand copies .................... 6,000 Total distribution .................... 28,300 Please call our office for full details

Published Monthly - Printed in Canada Publications Mail Agreement No. 40070144 Reproduction of any material including photographs and/or advertisements in whole or in part is forbidden.

The Supply Post is a proud member of the following Trade Associations:

INTERIOR LOGGING ASSOCIATION

3112 Pratt St., Abbotsford, BC V2S 3C7 | Fax 604-556-0559

www.riversideequipment.com

RETURN UNDELIVERABLE CANADIAN ADDRESSES TO CIRCULATION DEPT.: (Covers/Labels Only)

No. 105, 26730 - 56th Avenue, Langley, BC V4W 3X5

March 2020

Supply Post Â· Our Readers Are Your Buyers

Page 7

Phone: 250-493-4545 Fax: 250-493-8819 AFTER HRS, Joe Hewer: 250-490-6795 AFTER HRS, Dave Garnett: 250-490-7976

1698 Dartmouth Rd, Penticton, BC V2A 4B8

RENT OR RENTAL PURCHASE AVAILABLE

2005 HITACHI ZX135US 20" PADS, Q/C HYD THUMB, DIG BKT, 6,551 HRS YANMAR EXCAVATORS RENT, RENT TO OWN, LEASE OR BUY

2020 YANMAR SV08-1B CANOPY, RUBBER 14" BKT, 2'3"-2'9" WIDE, 21.9 HRS........CALL 2019 YANMAR VIO17-A CANOPY, Q/CHANGE, 2 BKTS, HYD THUMB, 147 HRS ..........CALL 2019 YANMAR VIO17-A CANOPY, Q/CHANGE, 2 BKTS, HYD THUMB, 213 HRS ..........CALL 2019 YANMAR VIO35-6A CAB AIR RUBBER, HYD THUMB, 2 BKTS 552 HRS .............CALL 2019 YANMAR VIO35-6A RUBBER, CAB, A. BLADE, 2 BKTS, HYD THUMB, 156 HRS ..CALL 2019 YANMAR VIO35-6A RUBBER, CANOPY, HYD THUMB, 2 BKTS 165 HRS .............CALL NEW YANMAR VIO35-6A CAB AIR RUBBER, HYD THUMB, 2 BUCKETS, 121 HRS .......CALL NEW YANMAR VIO35-6A CAB AIR RUBBER, HYD THUMB, 2 BKTS, 113 HRS .............CALL NEW YANMAR VIO35-6A CAB AIR RUBBER, HYD THUMB, 2 BKTS, 28.6 HRS ............CALL 2019 YANMAR VIO50-6A STEEL, CAB AIR, A. BLADE, 2 BKTS, HYD THUMB, 508HRS CALL NEW YANMAR VIO50-6A RUBBER, CAB AIR, HYD THUMB. 2 BKTS, 132 HRS ............CALL 2019 YANMAR VIO50-6A RUBBER, CAB AIR, HYD THUMB, 2 BKTS, 490 HRS ............CALL 2019 YANMAR VIO50-6A RUBBER, CAB AIR, HYD THUMB, 2 BKTS, 425 HRS .............CALL 2019 YANMAR VIO50-6A RUBBER, CAB AIR, HYD THUMB, 2 BKTS, 209 HRS .............CALL NEW YANMAR VIO55-6A CAB AIR, RUBBER TRACKS, HYD THUMB, 2 BKTS 72 HRS .CALL NEW YANMAR VIO55-6A CAB AIR, RUBBER TRACKS, HYD THUMB, 2 BKTS .............CALL 2019 YANMAR VIO80-1A STEEL BOR, BLADE, HYD THUMB, 2 BKTS, 219 HRS .........CALL 2017 YANMAR SV100-2A CAB AIR, STEEL PADS, HYD THUMB, 2 BKTS, 934 HRS .....CALL 2019 YANMAR SV100-2A STEEL, HYDRAULIC THUMB, 2 BKTS 497 HRS ..................CALL 2019 YANMAR SV100-2A STEEL, HYD THUMB, 2 BKTS/BREAKER PLMB 397 HRS ...CALL NEW YANMAR SV100-2A STEEL CAB AIR, HYD Q/C, 2 BKTS, 294 HRS .....................CALL

BRAND NEW YANMAR EXCAVATORS IN STOCK MORE ARRIVING DAILY

NEW YANMAR SV08-1B CANOPY, RUBBER 14" BKT, 2'3"-2'9" WIDE .......................CALL NEW YANMAR VIO17-A CANOPY, RUBBER, DIG BKT .................................................CALL NEW YANMAR VIO25-6A RUBBER, CANOPY, HYD Q/CHANGE, DIG BKT .....................CALL NEW YANMAR VIO35-6A RUBBER, CANOPY, HYD QUICK CHANGE ............................CALL NEW YANMAR VIO35-6A CAB AIR RUBBER, HYD Q/C, DIG BKT .................................CALL NEW YANMAR VIO35-6A CAB AIR RUBBER, HYD Q/C, DIG BKT .................................CALL NEW YANMAR VIO35-6A CAB AIR RUBBER, ANGLE BLADE, HYD Q/C, DIG BKT .........CALL NEW YANMAR VIO35-6A CAB AIR STEEL, HYD Q/C, DIG BKT ....................................CALL NEW YANMAR VIO50-6A CAB AIR RUBBER TRACKS, HYD Q/C, DIG BKT ...................CALL NEW YANMAR VIO50-6A CAB AIR STEEL TRACKS, HYD Q/C , DIG BKT .....................CALL NEW YANMAR VIO55-6A CAB AIR STEEL TRACKS, HYD Q/C , DIG BKT .....................CALL NEW YANMAR VIO80-1A STEEL, CAB AIR, BLADE, HYD Q/C, DIG BKT ..............CALL NEW YANMAR SV100-2A RUBBER OR STEEL, TRACKS, CAB, AIR HYD Q/C, DIG BKT..CALL

EXCAVATORS

2005 HITACHI ZX75US-A 18" PADS, AIR, BLADE, 3,285 HRS ....................................CALL 2008 HITACHI ZX75US-3 18" PADS, AIR, Q/C BUCKET, 4,902 HRS ............................CALL 2010 HITACHI ZX75US-3 BLADE, Q/C 2 BKTS, HYD THUMB, ONLY 1,758 HRS ..........CALL 2015 CAT 308E2 CR 18" BOR, AIR, BLADE, ONLY 102 HOURS .............................. $96,900 2016 CAT 308E2 CR 18" BOR, AIR, BLADE, ONLY 700 HRS .......................................CALL 2016 KOMATSU PC78US-10 18" BOR, Q/C HYD THUMB, ONLY 1,118 HRS ........FOR RENT 2014 CAT 311FL RR 20" PADS, BOLT ON RUBBER, ONLY 1,262 HRS ........................CALL 2010 CAT 312D 20" PADS, HYD Q/C, HYD THUMB, ONLY 2,900 HRS .................... SPECIAL 2011 HITACHI ZX120-3 20" PADS, AIR, ONLY 4,220 HRS .........................................CALL 2018 HITACHI ZX120-6 20" PADS, AIR, ONLY 1,241 HOURS .....................................SOON 2018 CAT 312F 20" PADS, BLADE, Q/C, HYD THUMB, ONLY 984 HRS .................FOR RENT 2019 CAT 312F GC 20" PADS, AIR COND, ONLY 4 HRS (NEW) ...................................CALL 2002 HITACHI ZX135US 20" PADS, AIR, QUICK CHANGE, DIG, 13,713 HRS .......... $38,500 4 2005 HITACHI ZX135US 20" PADS, AIR, ONLY 5,732-7983 HRS ............................CALL 2008 HITACHI ZX135US BLADE, 2 BKTS, HYD THUMB, CABGUARD, 6,468 HRS ........CALL 2 2010 HITACHI ZX135US-3 20" PADS, AIR BLADE, 6,557 - 7,231 HRS ...................CALL 2010 HITACHI ZX135US-3 20" PADS, AIR, ONLY 1,903 HOURS .................................CALL 2011 HITACHI ZX135US-3 20" PADS, AIR, ONLY 4,333 HRS .....................................CALL 2011 HITACHI ZX135US-3 28" PADS, AIR, BLADE, 4,685 HRS ..................................CALL 2011 HITACHI ZX135USK-3 20" PADS, AIR, HYD THMB, Q/C 2 BKTS, 4,134 HRS ........................................................................................................................... $103,500 2012 HITACHI ZX135US-3 28" PADS, AIR ONLY 1,530 HRS ......................................CALL 2013 HITACHI ZX135US-3 28" PADS, AIR, L/A, ONLY 1,672 HRS ..............................CALL 2014 HITACHI ZX135US-3 20" PADS, AIR, Q/C, 2 BKTS, HYD THUMB 1,558 HRS ......CALL 2014 HITACHI ZX135US-5 24" PADS, AIR, 9'11" ARM, 2,589 HRS, Q/C, DIG BKT ......CALL 2014 HITACHI ZX135US-5 20" PADS, AIR, 9'11" ARM, 3,600 HRS ............................CALL 2015 HITACHI ZX135US-5 20" PADS, AIR, 3,822 HRS, GRAPPLE BUCKET .................CALL 2014 HITACHI ZX135USK-5 20" PADS, Q/C, HYD THUMB, 2,920 HRS C/W V105E HYDRAULIC BREAKER ........................................................................................FOR RENT 2014 HITACHI ZX135US-5 20" PADS, BOR, L/A, Q/C, HYD THUMB, BLADE, 2,051 HRS ..........................................................................................................................FOR RENT 4 NEW DEERE 135G 28" PADS, AIR, BLADE, HYD THUMB, 2 BUCKETS ......................CALL 2014 KOMATSU PC138US-10 28" PADS, AIR, HYD THUMB, 2 BUCKETS, 2,100 HRS ........................................................................................................................... $124,900 2014 CAT 314E CR 20" PADS, Q/C, HYD THUMB, ONLY 2,336 HRS .................... $128,500 2016 CAT 314E LCR 24" PADS BOR, Q/CHANGE HYD THUMB, ONLY 908 HRS ....FOR RENT 2016 HITACHI ZX180LC-6N 32" PADS, AIR, ONLY 2,602 HOURS ..............................CALL 2013 CAT 316E L 28" PADS, AIR, Q/C HYD THUMB, 2,342 HRS .......................... $159,900 2011 CAT 319DL 32" PADS, AIR, Q/C 36" BUCKET, AUX HYDS ............................. $49,900 2011 HITACHI ZX200LC-3 32" PADS, AIR, Q/C, HYD THUMB, AUX HYD, 9,360 HRS CATWALKS, CABGUARD .............................................................................................CALL 2013 HITACHI ZX210LC-3 28" PADS, AIR, PIN GRABBER, HYD THMB, 4,342 HRS ........................................................................................................................... $119,900 2014 HITACHI ZH200-5B 32" PADS, AIR, HYBRID MACHINE, ONLY 1,765 HRS ..........CALL

Authorized Dealer

$69,900

$165,000

$66,500

2014 HITACHI ZX210LC-5N 24" PADS,AIR, Q/C, HYD THUMB, ONLY 2,951 HRS 2006 HITACHI ZX225US-3 24" PADS, AIR, 7,596 HRS ...............................................CALL 2011 HITACHI ZX225USR-3 24" PADS, AIR, ONLY 6,170 HRS ....................................CALL 2018 KOMATSU PC200LC-8 32" PADS, A/C, Q/C, HYDRAULIC THUMB ................FOR RENT NEW HITACHI ZX200LC-5 24" PADS, AIR COND, 2 BUCKETS & Q/C 225 HRS .....FOR RENT 2018 HITACHI ZX200LC-5 24" PADS, A/C, Q/C, HYD THUMB, PLUMBED FOR HAMMER, GUARDED, 507 HRS ............................................................................................FOR RENT 2017 DEERE 245G LC 32" PADS, 2 BKTS, Q/C, HYDRAULIC THUMB, 2,226 HRS .........CALL 3 DEERE 245G LC 32" PADS, 2 BKTS Q/C, HYDRAULIC THUMB ......................FOR RENT 3 DEERE 245G LC 32" PADS, 2 BKTS Q/C, HYD THUMB, CABGUARD ...................FOR RENT 2019 DEERE 245G LC-6 32" PADS, Q/C HYD THUMB, WRIST BUCKET ................FOR RENT 5 DEERE 245G LC-6 32" PADS, Q/C, HYD THUMB ..........................FOR RENT 2018 CAT 323 28" PADS, AUX HYDS, HEAD & FRONT CAB GUARDS, LIKE NEW COND, ONLY 974 HOURS....................................................................................................... SOON 2008 KOMATSU PC220LC-8 32" PADS, AIR, 2 BKTS, HYD THUMB, ONLY 4,750 HRS .CALL 2015 HITACHI ZX250LC-6N 32" PADS, AIR, AUX HYD, ONLY 1,483 HRS .....................CALL 2012 HITACHI ZX290LC-5N 32" PADS, AIR, HYD THUMB, Q/C, 6,689 HRS .................CALL 2015 DEERE 2454D ROADBUILDER, HYD THUMB, HIGH WALKER, 7" RISER, AUX HYDRAULICS, 6,267 HRS ............................................................................................CALL 2012 HITACHI ZX350LC-5 32" PADS, AIR, DIG BKT, ONLY 6,230 HOURS ............. $124,900 2012 HITACHI ZX350LC-5N 32" PADS, AIR, Q/C, PRO LINK THUMB, ONLY 5,358 HRS CALL 2018 DEERE 345G LC 32" PADS, AIR, HYD THUMB, Q/C, 2 BKTS ........................FOR RENT NEW HITACHI ZX330LC 24" PADS, AIR, HYD THUMB, B/NEW..............................FOR RENT 2014 CAT 336E L QUICK CHANGE, 2 BUCKETS, ONLY 4,345 HRS ........................ $192,500 2019 CAT 336 28" PADS, AIR COND, NEXT GEN, ONLY 1,933 HOURS ......................... SOON 2013 KOMATSU PC360LC-10 32" PADS, AIR, Q/C HYD THUMB, CAGUARD, 3,260 HRS ............................................................................................................................ $239,000 2015 HITACHI ZX470LC-5B 24" PADS, AIR, ONLY 4,440 HOURS................................ SOON

DOZERS

2014 KOMATSU D39PX-22 6 WAY, CAB AIR, ONLY 1,933 HRS, MS RIPPER (D5K SIZE) ...........................................................................................................................FOR RENT 2015 CAT D6K2 XL 6 WAY, CAB AIR, MS RIPPER, ONLY 2,051 HRS .............................CALL 2005 CAT D7R XR SII DAT BLADE, A/C CAB, D/STEER, RIPPER, 8,068 HRS ......... $239,900 NEW CAT UNDERCARRIAGE, OIL SAMPLES, WORK ORDERS 2011 KOMATSU D65WX-17 6 WAY DOZER, CAB AIR, MS RIPPER .......................... $79,900 2014 KOMATSU D65PX-17 6 WAY DOZER, MR RIPPER, SWEEPS, ONLY 3,500 HRS ...........................................................................................................................FOR RENT

LOADERS, SKID STEERS

2018 YANMAR V4-7 CAB AIR, HYD Q/C, .85CU YD BKT/FORKS 144 HRS ....................CALL NEW YANMAR V4-7 CAB AIR, BOBTACH Q/C, .91 CU YARD BKT ...................................NEW NEW YANMAR V12 CAB AIR, QUICK CHANGE FORKS/ & 2 CU YD BKT ..........................NEW 2006 KOMATSU WA250-5 20.5 TIRES, HYD COUPLER, BKT/FORKS, 12,375 HRS .. $49,900 NEW KOMATSU WA320PZ-6 20.5R TIRES, HYD COUPLER, E/S, 3.5YD BKT/FORKS ...........................................................................................................................FOR RENT 2015 CAT 950K 23.5R TIRES, A/C, R/C, E/S, 4.32YD BKT, ONLY 2,820 HRS .........FOR RENT 2017 KOMATSU WA380-8 23.5R TIRES, HYD Q/C, A/C, R/C, RVC, ONLY 1907 HRS ............................................................................................................................ $229,900 2016 BOBCAT MT55 MINI LOADER, ONLY 216 HRS 44" BKT ..............................FOR RENT 2015 BOBCAT T590 CAB AIR, SJC CONTROLS, 428 HRS.....................................FOR RENT NEW BOBCAT T650 CAB AIR, STD CONTROLS, PWR BOBTACH, 74" BKT ..FOR RENT 2009 BOBCAT S70 CAB, Q/C BKT, ONLY 1,541 HRS ............................................FOR RENT 2012 BOBCAT S70 CAB, Q/C BKT, AUX HYD, 1,165 HRS .............................................CALL NEW BOBCAT S590 CAB AIR, STD CONTROLS, 68" BKT .....................................FOR RENT

MARCH SPECIAL $59,900

2007 CAT 735 26.5R25 TIRES, HEATED BED, 13,110 HRS READY TO WORK 2014 BOBCAT S650 CAB AIR, HAND/FOOT, ONLY 2,535 HRS ......................... $26,500 2012 BOBCAT S850 A/C CAB, 84" BKT, 2 SPEED, 2,548 HRS .............................CALL

GRADERS/COMPACTORS 1979 CAT 140G 14-24 TIRES, 14'MB, SNOW WING, 4,457 HRS ON METER ........CALL 1998 CAT 140H 17.5R TIRES, 14' MB, A/C CAB, MS RIPPER, 8,500 HRS ...........CALL 2003 CAT 140H VHP 14' MB, ACCUM, SNOW WING, A/C CAB, 14,00R24 TIRES ...CALL 2011 CAT 140M VHP PLUS 14' MB, ACCUM, A/C CAB, 5,334 HRS, 14R24 TIRES, C/W WOBBLY WHEEL COMPACTOR ..................................................................... $124,900 NEW CORNIVER CT40S 40" SMOOTH DRUM, KUBOTA ENG, FF TIRES 287 HRS ...................................................................................................................FOR RENT NEW CORNIVER CT48S 48" SMOOTH DRUM, KUBOTA ENG, FF TIRES ........FOR RENT 2008 VOLVO SD25D 41" DRUM DRIVE, CANOPY, 1,300 HRS ..............................CALL 2011 VOLVO SD45D TF 54" DRUM, PF SHELL KIT, 945 HRS .......................FOR RENT 2005 ING. RAND SD70D TF 66" SMOOTH DRUM/SHELL KIT, CANOPY .......... $38,900 2012 VOLVO SD70D 66" DRUM, CAB AIR, ONLY 2,528 HRS ..............................CALL 2 VOLVO SD75 66" SHELL KIT, CAB AIR ......................................................FOR RENT 2014 SAKAI SV540D 84" SMOOTH DRUM, CANOPY, ONLY 470 HRS ............. $86,900 2 2014 SAKAI SV540TF 84" SMOOTH DRUM/PADFOOT SHELL KIT, CAB AIR ...................................................................................................................FOR RENT

DUMP TRUCKS 2013 CAT CT660L CAT C15 550HP, 18SPEED, AIR RIDE, 20K FRONT 46K REARS, 220" WB, ALUM WHEELS, K LINE 16'6" BOX, HL GATE, CERT ......................... $79,900 3 CANYCOM SC75PD RUBBER, 1,655 LB PAYLOAD, 35" WIDE, 180 DEGREE DUMP ...................................................................................................................FOR RENT 3 CANYCOM S25A RUBBER, CANOPY, 180 DEGREE SWIVEL DUMP .............FOR RENT NEW YANMAR C30R-3R CANOPY, C/W SWIVEL DUMP, 5,513 LB PAYLOAD ........CALL 2018 YANMAR C50R RUBBER, CAB, SWIVEL DUMP, 8,300LBS MAX CAP ....FOR RENT 2005 CAT 730 23.5 TIRES, TAILGATE, ONLY 5,873 ORIGINAL HRS ............... $204,900 2011 CAT 730 23.5R25 TIRES, TAILGATE, ONLY 3,200 HRS .........................FOR RENT 2012 VOLVO A30F 23.5 TIRES, RV CAMERA, EMERG STEER, 4,141 HRS .....FOR RENT 2012 VOLVO A30F 750/65R25 TIRES, RVC, HEATED, ONLY 5,360 HRS ........FOR RENT 4 2019 KOMATSU HM300-5 23.5R TIRES, HTD BOX, BRAND NEW..............FOR RENT

LIFTS & LIFT TRUCKS 2013 DOOSAN G25E5 4,600LB FORKLIFT, DUAL FUEL, SS, 3 STAGE MAST ........CALL 2018 GENIE GTH-5519 TELESCOPIC FORKLIFT, CAB, ROTATING CARRIAGE .FOR RENT 2007 CAT TL1055 10,000LB, 55', A/C CAB, TILT CARRIAGE, 5,004 HRS ........ $78,900 2012 JLG G1055A 10,000LB, 55' LIFT, CAB, HYD LEVELING, 4,448 HRS ....... $99,900 2008 JLG 12SP ELECTRIC PERSONAL LIFT, 12' BOOM, 21 HRS ...................... $3,990 NEW GENIE GS1930 19' ELECTRIC SCISSORLIFT........................................FOR RENT 2010 GENIE GS2632 26' ELECTRIC SCISSORLIFT, REMOTE, PWR TO PLATFORM, 229 HRS ....................................................................................................... $14,900 2018 GENIE GS3369 RT 4X4, KUBOTA DIESEL, OUTRIGGERS, B/NEW .........FOR RENT 2014 GENIE Z34/22 4X4, KUBOTA, 34' LIFT, 4' JIB .....................................FOR RENT 2011 GENIE Z45/25J 4X4, DIESEL, 5' JIB, FF TIRES, 3,364 HRS ................... $39,900 3 GENIE Z45/25J 4X4, DIESEL, JIB .............................................................FOR RENT 2014 JLG 450AJ 4X4, DUAL FUEL, 1,702 HRS ............................................FOR RENT 2 JLG 600AJ 4X4, DIESEL, PWR TO PLATFORM, FFT ...................................FOR RENT 2014 GENIE Z60/34 4X4, ART BOOM LIFT, DEUTZ.......................................FOR RENT

WATER TRUCKS

1999 KOMATSU CD60R-1 STEEL TRACKS, 360 DEGREE DUMPER, 7,160 HRS

2000 FORD F650 CUMMINS PWR, 2,000 GAL, 19,901 MILES, 6 SPEED, A/C, PTO, FF-S-RR, HOSE REEL .................................................................................... $32,900 2006 FORD F750 5.9L CUMMINS, 7 SPEED, F/R/SIDE SPRAY, AIR BRAKES, HOSE REEL, CERT, 25,894 MILES............................................................................. $43,900 2007 FORD F750 2,000 GALLON WATER TRUCK(VALEW) FRONT, REAR, SIDE SPRAY, REAR HOSE REEL, CUMMINS, AIR BRAKES, 18,733 MILES ............................. $43,900 2008 FREIGHTLINER M2 220HP CUMMINS, 5 SPEED, 3" PUMP, FRS SPRAY, UNUSED 2,000 GALLON WATER TANK ........................................................... $62,500 2010 INT. 4300 MAXXFORCE DT 7.6L, 255 HP, AUTO TRANS, 152" WB, PTO, BERKLEY PUMP, FRT, REAR & SIDE SPRAY, STREET FLUSHER, SELF LOADING, HOSE REEL, 154,357 KMS .................................................................................CALL 2005 KENWORTH T300 4,000 GAL T/A WATER TRUCK, FRONT, REAR & SIDE SPRAY, CAT C7 275HP, 14K FRONT, 40K REARS, HOSE REEL, 3" PUMP, CERTIFIED, 54,000 MILES .....................................................................................................CALL

www.pacificrimequipment.com | sales@prequip.com

Page 8

Supply Post · supplypost.com

ATTACHMENTS & MORE

March 2020

Five Efficiency Champions Share Their Productivity-Boosting Tips A company is only as productive as the people driving it forward – and with great efficiency comes great results. From the factory floor to the head office, we hear from a handful of Volvo employees on how they have learnt to work smarter within their teams and their workflows.

Own or Rent

• Hammers • Crushers Crusher Buckets • Grapples • Compactors • Blowers & Dust Suppression

1-877-255-9293 · 604-888-9020 · www.vanedequipment.com

1. Peter Reuterberg: Efficiency In Design When it comes to design efficiency, Volvo CE’s Chief Designer for Wheel Loaders, Peter Reuterberg, is an expert. “My job is to understand the requirements of a product and then provide a clear vision to execute the design,” explains Peter. “It´s not always easy since good design is often the result of exploration. What I do to make it efficient is to do the exploration with thumbnail sketches before digging into every little detail. It´s important that all stakeholders can agree on a general theme.” The real time-consuming part

of Peter’s job comes next… “Once we have all agreed on a final design sketch, I try to stick to it. It´s easy to wander away from the theme and create parallel tracks but believing in a good idea and following a workflow will save time.” Another way Peter and his team try to make the design process more efficient is to do it once, do it right, and use it everywhere. They do this by identifing a number of components that carry a strong brand identity and can then be used in a range of products. This is not without challenges. Volvo CE has many different requirements on products and functionality, which cannot be compromised. But modular design systems – that allow for customization and future updates – make it work. The benefits of this efficient approach are less development cost for the company as a whole and clear brand recognition throughout the wide range of products.

2. Emma Hedlund: Efficiency On The Factory Line Emma Hedlund is a factory worker based in Volvo CE Operations, in Eskilstuna, Sweden. She manufactures a specific component called a sun gear. Working in two shifts per day she manages to make 200 sun gears every day! In her department – Operations – efficiency is key. “We always strive to make our work more efficient and smart,” explains Emma. “For example, we use a method called “SMED” (SingleMinute Digit Exchange of Die) which aims to reduce the time it takes to complete the production of a component to a “single” digit (less than 10 minutes) by streamlining workflow – one way we do this is by completing certain background tasks while the machines are running.” Each month, Emma’s manager undertakes a job observation to assess the team’s workflow on chosen machines. In this way, the team is continuously assessing what needs to be changed so that the workflow can be more efficient. Emma goes on to explain Continued on page 9

QUALITY AFTERMARKET PARTS FOR ALL MAKES ALL MODELS

HYDRAULIC CYLINDER (STICK)

YOUR UNDERCARRIAGE EXPERTS!

HYDRAULIC CYLINDER (BOOM) BOOM

STICK

CAB

HYDRAULIC CYLINDER (BUCKET)

ENGINE (DYNOMOMETER TESTED)

MAIN CONTROL VALVE ATTACHMENTS MAIN HYDRAULIC PUMP

LINKAGE

SWING DRIVE

SWING RING TRAVEL MOTOR SPROCKET

BUCKET

FINAL DRIVE

YOUR WEAR PARTS EXPERTS!

CAB BODY FRONT TRACK IDLER SPRING

BOTTOM ROLLERS TRACK GROUPS

www.essltd.com

SINCE 1946

CONNECT WITH US

March 2020

Supply Post · Our Readers Are Your Buyers

Continued from page 8

that “it is important to see the production from different angles and with different eyes, which is why we have visits from other cross-functional teams”. This constant striving for improvement suits Emma, who considers herself to be a person who is always looking to develop. But Emma does admit that “sometimes I do things unknowingly inefficient and that’s why these job observations are so important.” 3. Andrea Jiang: Efficiency In Business Development And Marketing Andrea Jiang, Head of Business Development and Marketing for Volvo Financial Services (VFS) China, has worked for Volvo for almost 10 years. In that time, she has risen through the ranks from customer services officer to management team member. “I owe a lot of my success to a manager who believed in me,” explains Andrea humbly. “Finance may be seen as a man’s world, but not at VFS, where everyone is respected, and women can thrive. I think VFS un-

derstands more than most the benefits of greater diversity and the value female leaders bring to the business. I wouldn’t have had half the opportunities I’ve had if it weren’t for the amazing support and encouragement that I’ve had from everyone at VFS. Now that I am in such a key managerial role, I am trying to recreate the support that I had. When I first started at VFS I was the youngest person in the department but my manager had faith in me – and over time I gained faith in myself.” Andrea recognizes that to run a business efficiently you have to encourage individual’s development, recognize people’s strengths and help them learn and progress. “As an organization we are both people focused and results driven and that’s what makes us efficient,” she says. 4. Sylwia Chmielewska: Efficiency In Leadership Sylwia Chmielewska, Managing Director Central East North, VFS, says: “Efficiency is really in my DNA – it is in every process I do. At VFS we are focused on continuous

improvement and teams are encouraged to explore and develop new ways of working. I believe, from a managerial perspective, the best way to promote efficiency in your workforce is to instill a sense of own-

ership. Teams know what works best and where their departments are struggling. By fostering a work environment that lets employees speak up and suggest changes without fear of making mistakes, leaders

Page 9 can really see employees flourish, their companies develop – and this can lead to huge boosts in efficiency and savings.” 5. Johannes Nordgren: Efficiency On Site

Johannes Nordgren works in Volvo CE’s EMEA Productivity & Efficiency Services department as an Application Engineer. “To me efficiency means doing as much as possible with the resources available,” Continued on page 10

CONSTRUCTION / FORESTRY / FARM EQUIPMENT Across Western Canada Include your equipment in this upcoming auction

There is a high international demand for quality used equipment Early booking ensures the best advertising opportunity to market your equipment ! Buy With Confidence ~ Sell With Results ~ Champion Assets Online Auctions ~ The Smart Choice!

ARTICULATED . HIGH QUALITY DUMP TRUCKS . LOAD CAPACITY 22.000 - 44.000 LB . EASY TO OPERATE . LOW RUNNING COSTS

Visit Hydrema at the ConExpo Festival Grounds, Booth F5058

High Mobility Dump Trucks. Off Road superior. Lowest possible ground pressure, highest maneuverability and unmatched stability. Carry your load wherever you want. Hydrema US Inc. Phone: (404) 614 1747 www.hydrema.us

Looking for dealers in Western Canada | Call Allen Patterson 403-318-5359

Page 10

Supply Post · supplypost.com Continued from page 9

VANDERVELDT EQUIPMENT PARTS LTD.

250-951-2082 Providing New OEM Components with Huge Price Savings!

explains Johannes. “Currently, I am working on developing the Volvo Operator Training Program. When it comes to the Operator Training Program there are two main aspects to consider regarding efficiency. The first is the way training is delivered. “Training needs to be smart and efficient. Customers’ production is often very costly, therefore unnecessary downtime when the operators are busy training needs to be minimized.” The sec-

March 2020 ond aspect to consider is how the training benefits the customer. “Our main focus is to help operators unlock the full capability of their machines; this is especially relevant in the EcoOperator Training,” says Johannes. “In this training we focus on how to perform the task in the most productive and efficient way possible. The most important thing to remember is that you have to constantly reevaluate and assess the result and tweak things to make sure that you are provid-

ing the best training.” There are clear trends when it comes to enhancing efficiency throughout your business. From design and manufacturing, to marketing and finance, right the way through to operator training we see a network of support, innovation and an environment of constant, well-informed, evolution. You have to be supportive of, and willing to adapt and stay relevant to, high efficiency across your business. b Source: Volvo

We offer a large in-house selection of new OEM components for: Quality Engineered & Manufactured Heavy Equipment Attachments

 Hitachi  Deere  Case  Link-Belt  CAT  Kobelco

www. VeldtParts .com

Toll Free 1-866-319-4114 | destec@telus.net | www.destec.ca

PUT US TO THE TEST. LiuGong has developed a full fleet of construction equipment that has been proven on jobsites from around the world. We start with intuitive design and world class componentry, from Cummins® and Yanmar® engines to ZF® transmissions and axles. We load the machines with standard features our competitors charge thousands for. Then we back those machines with the industry’s most comprehensive total coverage warranty and a growing local service network. We have passed tests from Beijing to Buenos Aires, from Krakow to Katmandu, and are ready to be put to the test in North America. For interest in the machines or being a part of our growing Dealer network, go to LiuGongNA.com or come see us at ConExpo.

VISIT US AT CONEXPO BOOTH # F6781 FESTIVAL GROUNDS PAVILION SEE THE ALL NEW LINE OF F SERIES EXCAVATORS!

March 2020

Supply Post · Our Readers Are Your Buyers

Page 11

British Columbia Great West Equipment

PURPOSE-BUILT

FROM THE GROUND UP

Campbell River, BC

(250) 286-0123

Cranbrook, BC

(250) 426-6778

Fort St. John, BC

(250) 785-4223

Kamloops, BC

(250) 372-3996

Nanaimo, BC

(250) 716-8804

Prince George, BC

(250) 612-0255

Surrey, BC

(604) 882-5051

Terrace, BC

(250) 635-9033

Vernon, BC

(250) 549-4232

Williams Lake, BC

(250) 392-9599

www.gwequipment.com

Alberta Strongco Acheson, AB

1-877-948-3515

Calgary, AB

1-800-342-6523

Fort McMurray, AB

1-855-799-4201

Grande Prairie, AB

1-888-513-9919

Red Deer, AB

1-866-950-3473

www.strongco.com

Saskatchewan Redhead Equipment

Estevan, SK

(306) 634-4788

Lloydminster, SK

(306) 825-3434

Melfort, SK

(306) 752-2273

Prince Albert, SK

(306) 763-6454

Regina, SK

(306) 721-2666

Saskatoon, SK

(306) 934-3555

Swift Current, SK

(306) 773-2951

www.redheadequipment.ca

Manitoba Westcon Equipment & Rentals Ltd.

Winnipeg, MB

1-800-453-2435

www.westconequip.ca

Ontario Strongco

Ottawa, ON

1-800-822-3308

Sudbury, ON

(705) 692-0552

Thunder Bay, ON

(807) 475-3052

www.strongco.com Top Lift Enterprises, Inc.

Bolton, ON

(905) 857-5200

Stoney Creek, ON

(905) 662-4137

www.toplift.com

Quebec Strongco

What if YOUR

material handler’s purpose is a little different from the OTHER material handler’s purpose?

When you want purpose-built, only SENNEBOGEN purpose-builds one machine at a time to meet your goals.

Think of the possibilities! See how SENNEBOGEN can purpose-build the right machine for you

www.sennebogen-na.com | +1-704-347-4910

• • • •

Diesel and/or electric-drive 44,000 to 750,000 lbs. Rubber tired, tracked or stationary Custom boom & stick configurations

Baie-Comeau, QC

1-866-996-3091

Chicoutimi, QC

1-800-323-1724

St-Augustin, QC

1-800-463-2662

Trois-Rivieres, QC

1-855-840-0828

Val d’Or, QC

1-800-561-4192

www.strongco.com Top Lift Enterprises, Inc.

St-Laurent, QC

(514) 335-2953

www.toplift.com

Newfoundland/Labrador Strongco

Mount Pearl, NL

(709) 747-4026

www.strongco.com

New Brunswick Strongco

Moncton, NB

(506) 857-8425

www.strongco.com

Nova Scotia Strongco

Dartmouth, NS

(902) 468-5010

www.strongco.com

Prince Edward Island Strongco

(902) 468-5010

www.strongco.com

194-1161E CO-OP Supply Post 9.75x13.25 4C.indd 1

2020-02-12 9:32 AM

Page 12

Supply Post · supplypost.com

30418 Simpson Road, Abbotsford, BC

(604) 203-6000

james@interquiprentals.com

RENTAL EQUIPMENT

2015 Wacker Neuson 3001 Site Dumper c/w swivel skip. 3,000 kg payload, 25km/hr. (SALE OR RENTAL)

2016 Komatsu PC138US c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

2012 Komatsu PC210-8 c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

2016 Takeuchi TB260 c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

2014 Hyundai R210LC-9 c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

Wacker Neuson DW60 Site Dumper, AWD Front or swivel tip, 6,000kg payload. Optional cab.(SALE OR RENTAL)

March 2020

6 Evolving Technologies In The Construction Industry Attend the education session “Pathway to Resilience: Concrete Solutions to Sustainable Communities” on Tuesday, March 10, 2020 from 9:30 a.m. - 10:30 a.m. at CONEXPOCON/AGG. Every year, natural disasters threaten infrastructure and human life. The greatest damage (measured in repair dollars) is caused by storms. It is not only the high winds of thunderstorms, but rain and hail that cause the damage. Hurricanes and flooding are the second and third most destructive natural event, respectively. “Seven of the top 10 costliest disasters in U.S. history are hurricanes,” says Lionel Lemay, Executive Vice President, National Ready Mixed Concrete Association (NRMCA). The Northridge Earthquake in 1994 ($77 billion), the drought of 1988 ($44 billion), and 1993’s midwest flooding ($37 billion) are the only non-storm disasters to be included in the top 10 worst natural disasters in US history. The top natural disasters in US history are Hurricane Katrina (2005), which caused more than $166 billion in damage and 1800 deaths; Hurricane Har-

vey (2017), which caused $128.8 billion in damage and displaced 30,000 people; and Hurricane Maria (2017) caused $93 billion in damage and nearly 3,000 deaths. The Center for Climate and Energy Services (C2ES) states “recent analyses conclude that the strongest hurricanes oc-

curring in some regions including the North Atlantic have increased in intensity over the past two to three decades. For the continental United States in the Atlantic Basin, models project a 45-87 percent increase in the frequency of Category 4 and 5 hurricanes.” Eight of the 10 costliest hurricanes on record in the United States having occurred since 2004. According to the National Oceanic and Atmospheric Administration (NOAA), the year 2017 tied with 2011 for the Continued on page 13

5425 Production Blvd., Surrey, BC, V3S 8P6

Phone 604.530.5758 Fax 604.530.3554

Toll Free 1.888.530.5444 Focused on Parts for John Deere & Hitachi Late Model Excavators

NOW WRECKING: ZX270LC-3

New Holland D85WT Dozer c/w ripper and 6 way blade (FOR RENTAL ONLY)

JCB 3TS-8T Teleskid c/w bucket & forks (FOR RENTAL ONLY)

MORE INVENTORY ARRIVING SOON. • Site Dumpers • Skid Steers • Much more!

Check out our website for all of our available rentals

Call for availability 604-203-6000

interquiprentals.com

US ON FACEBOOK!

If you’re a fan of

visit us on Facebook and give us the thumbs-up! JOHN DEERE 450D LC

Components · Cylinders · Cabs · Engines Undercarriage · Booms · Sticks · Linkage Facebook.com/ SupplyPost71

www.langleyexcavator.com parts@langleyexcavator.com

March 2020

Supply Post · Our Readers Are Your Buyers Continued from page 12

highest number of billiondollar disasters (16); they caused more than $370 billion in damage. The year 2018 saw 14 weather disasters that caused $330 billion in damage.

The National Hurricane Center categorizes Atlantic hurricanes based on wind speed. A storm with winds exceeding 74 mph is a Category 1 hurricane. Storms with winds stronger than 111 mph are considered

Page 13 “major hurricanes” (Category 3 or higher). The solution to protecting infrastructure from natural disasters, says Lemay, is building more resilient infrastructure including the buildings we live and work in.

“Resilience is the ability to plan for and adapt to adverse events,” says Lemay. Our habit of building quickly at lowest cost comes with a cost. NRMCA recommends a four-step Continued on page 14

mountainforestryequipment.com

EQUIPMENT FINANCING | FASY & EASY • Competitive Rate • All Types of Equipment • Lease or Finance • Private Sales • Pre-Approvals • Auctions

$93,000

$133,000

$337,500

2008 JOHN DEERE 848H, Strong running unit, Well maintained, New Pins @ 12,000 Hrs., Engine is at mid-life, 13,360 Hrs.

2014 INTERNATIONAL 7500, c/w 6,000lb Stellar Crane, Magnum Reels, Cust. Dog House, New EGR Valve, Locking Rear Diff., 9L Int. Eng., New Tire Chains 3x Singles, 141,411 Kms.

2018 HITACHI 350LC-5, comes with 2 Buckets & thumb, Excellent Condition with Low Hours, 1,894 Hrs.

$453,000

$257,000

$209,000

2017 TIGERCAT H855D BARE PIN, Very Well Maintained, Ready to install any harvesting head, 3,846 Hrs.

2017 JOHN DEERE 2154D, c/w Southstar QS505 Processor, Well maintained Processor, Ready immediately! 6,921 Hrs.

2014 JOHN DEERE 850K, c/w 6-Way Blade & 3-Pocket Ripper, New rollers, sprockets and idlers, Blade re-skinned, 4,182 Hrs.

Call Ron Corbeil 1-877-767-7600 | rcorbeil@fclfinancial.com

833-988-0375

WWW.FCLFINANCIAL.COM

Allu is the world market leader in Screener Crusher Buckets. New and Used Buckets Sales and Rentals Replacement Parts in stock

KCox@mountainforestryequip.com

PROUD DEALER OF:

ATTACHMENTS & EQUIPMENT SALES AND RENTALS NEW & USED PARTS CALL US TODAY! 1-844-802-4490

www.arrowwest.com

FMS attachments meet or exceed the competition in quality, ﬁt and ﬁnish with a one year warranty on materials and workmanship.

Page 14

Supply Post · supplypost.com

March 2020

ters. Georgia has adopted process to try to overcome an appendix with codes that address natural disasthat. ters and local jurisdictions have the choice to adopt 1. Adopt An Updated it and southern Florida Building Code “That is coming along. adopted a higher buildSome states don’t yet have ing code after Hurricane a state-wide building code, Andrew struck the area in but most have,” says Le- 1993. may. Some states have codes 2. Adopt Highthat address natural disas- Performance Building

Continued from page 13

Standards These are standards that go beyond building code to address specific hazards. According to Lemay, there are a few high-performance building standards but they’re not well-developed. “One we reference frequently is called FORTIFIEDTM; it’s a voluntary program developed by Continued on page 20

• SPECIALIZING IN NEW & USED UNDERCARRIAGE • PARTS • EQUIPMENT RENTALS & REPAIRS EQUIPMENT LTD. • TRACK PRESS FACILITY • IDLER REBUILDING

594 Chilcotin Road, Kamloops, BC V2H 1G5

EQUIPMENT FOR RENT OR SALE

HEAVY EQUIPMENT

PARTS

• • • • • • •

• • • •

FOR SALE 2018 Komatsu PC200LC-8, 3 bkts, Q/C, thumb, cabguard, catwalk, new mach. 2017 Komatsu PC350LC-8, 3 bkts, thumb, 2,200 hrs, new cond. 2015 Komatsu PC170LC-10, 3 bkts, thumb, cabguard, like new cond., 1,400 hrs. 2014 Komatsu PC290LC-10, 2 bkts, thumb, exc. cond, 4,800 hrs. 2014 Komatsu PC88MR-8, 3 bkts, wrist-bkt., hyd. thumb, swing boom, 2,400 hrs. 2016 Hitachi ZX85 USB-5, 3 bkts, hyd. thumb, swing boom and blade, exc. cond 2012 Komatsu D65EX-17, sigma blade, ripper & forestry guard., new U/C, plumbed for GPS, exc. cond. Dressta TD10M Crawler, 6 way, blade, cab, A/C, 1,225 hrs, like new cond. 2014 Hamm H13iX, 84” smoothdrum packer w/cab, A/C, low hrs, exc. cond. 2012 Komatsu PC200LC-8, 2 bkts, thumb, 2012 Hamm 3412, 84” smoothdrum packer w/shell kit, cab, A/C, exc. cond. cabguard, Q/C, exc. cond., 3,300 hrs. 2014 & 2010 Hamm 3307, 66” smoothdrum packer w/shell kit, cab, A/C, exc. cond.

HUGE INVENTORY OF USED UNDERCARRIAGE

FOR RENT

• • • • •

WE SHIP ACROSS NORTH AMERICA

2014 Komatsu WA270-7, wheel loader, 3 yd. bkt. forks/pipe grapple, exc. cond.

• • • •

Cat 330 TGA’s 28”, 2 bar pads on new rails. Komatsu D65EX15-17 TGA’s 24” (Plus System) ZX350/PC360 New Take-off Track Groups, 32” 3 bar Deere 2154 TGA’s 28” 2 bar on new rails New Berco 7.5 pitch TGA’s w/24” 2 bar pad fits 200 size excavator ZX200LC/PC200LC TGA, 28” 2 Bar on new rails ZX350, ZX450 bottom rollers. T.Cat 870 / Deere, 959 track spring assy. rebuilt. ZX200 (Rebuilt) Track Adj. Assembly.

Phone: (250) 374-5054

1992 - 2020

Email: traktech@telus.net

EVES: Regan Zurowski (250) 371-1444 • Chad Zurowski (250)371-7535

For photos and more listings visit www.traktech.ca

BEST DEFENCE AGAINST

ROUGH TERRAIN

ASK US ABOUT OUR CAB REBUILD PROGRAM!

REBUILT. IN STOCK. READY TO SHIP.

TOLL FREE 1.855. 85.1115 SALES@BRIKERS.COM WWW.BRIKERS.COM

Keep fatigue, discomfort, aches and pains at bay with Darby’s ergonomic industrial seats.

March 2020

Supply Post · Our Readers Are Your Buyers

Page 15

POWERED BY INNOVATION. DRIVEN BY YOU. We keep making better tools so you can keep doing better work. Make things happen with a Doosan® machine.

Authorized Doosan Dealers BRITISH COLUMBIA

NOVA SCOTIA

HARTINGTON EQUIPMENT

250-785-1197 dealer.doosanequipment.com/Fort-St.-John

NOVA INTERNATIONAL LIMITED

902-847-3468 dealer.doosanequipment.com/Aylesford

613-372-2744 dealer.doosanequipment.com/Hartington

WESTERRA EQUIPMENT

902-798-9544 dealer.doosanequipment.com/Windsor

705-268-7600 dealer.doosanequipment.com/Timmins

DOOSAN OF THE PEACE

604-850-7313 dealer.doosanequipment.com/Abbotsford 250-314-3600 dealer.doosanequipment.com/Kamloops 250-716-0443 dealer.doosanequipment.com/Nanaimo

WILLIAMS MACHINERY

250-563-0181 dealer.doosanequipment.com/Prince-George

ALBERTA

BROWN’S INDUSTRIAL SALES

780-875-2339 dealer.doosanequipment.com/Lloydminster

DOOSAN OF THE PEACE

780-538-0791 dealer.doosanequipment.com/Grande-Prairie

ONTARIO

BOBCAT OF HAMILTON LTD.

905-643-3177 dealer.doosanequipment.com/Stoney-Creek

C G EQUIPMENT

519-826-0550 dealer.doosanequipment.com/Guelph 519-236-4934 dealer.doosanequipment.com/Zurich

EASTROCK EQUIPMENT INC.

613-737-3963 dealer.doosanequipment.com/Ottawa

G F PRESTON SALES & SERVICE

705-384-5368 dealer.doosanequipment.com/Sundridge

READYQUIP SALES & SERVICE LTD.

MANITOBA

AGCON EQUIPMENT

204-255-4772 dealer.doosanequipment.com/Springfield-MB

NORTHWEST TERRITORIES

RON’S AUTO SERVICE LTD.

STRATTON EQUIPMENT COMPANY

867-766-6025 dealer.doosanequipment.com/Yellowknife

NEW BRUNSWICK

BOBCAT OF REGINA, LTD.

807-483-7777 dealer.doosanequipment.com/Stratton

SASKATCHEWAN

PAUL EQUIPMENT AND SONS

306-347-7600 dealer.doosanequipment.com/Regina

QUEBEC

306-931-7880 dealer.doosanequipment.com/Saskatoon

450-464-8000 dealer.doosanequipment.com/fr/Beloeil

DOOSAN OF WHITEHORSE

506-826-3289 dealer.doosanequipment.com/Balmoral

ÉQUIPEMENTS PLANNORD BELOEIL

SAINT-AUGUSTIN-DE-DESMAURES

EARTHWORKS EQUIPMENT CORPORATION

YUKON

867-633-4426 dealer.doosanequipment.com/Whitehorse

418-878-4007 dealer.doosanequipment.com//fr/St.-Augustin-de-Desmaures

Learn more at doosanequipment.com Doosan® and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. © 2020 Doosan Infracore North America, LLC. All rights reserved.

Page 16

Supply Post · supplypost.com

March 2020

VALUE KNOWS NO BOUNDARIES. With our recent purchase of Nortrax, Brandt has united every John Deere Construction & Forestry dealership in Canada to bring you the very best equipment, backed by the hardest-working, best-equipped support team in the business, every single day. That’s Powerful Value. Delivered.

Fort Nelson

Terrace

Fort St John

Smithers

Fort McMurray

Grand Prairie

Prince George

Edmonton Nisku

Williams Lake Campbell River Nanaimo

Kamloops Vernon Surrey

Castlegar

Red Deere

Saskatoon

Calgary Cranbrook

Regina

Winnipeg

Thund

March 2020

ryden

der Bay

Supply Post · Our Readers Are Your Buyers

100+

800+

SERVICE POINTS

SERVICE TECHS

Page 17

90m+ 24/7/365

PARTS INVENTORY

CUSTOMER SUPPORT

Goose Bay

Grand Falls-Windsor Corner Brook

Bai-Comeaue Mont-Joli Chicoutimi Amos

Hearst

Mont Laurier

Timmins Sudbury

Ottawa Barrie

Milton Cambridge London Windsor

brandt.ca 1-888-227-2638

Dégelis

Moncton Fredericton Quebec City Halifax St. Georges Trois-Riviéres St. Agathe Laval Brossard

Peterborough Mississauga Stoney Creek

Bathurst

Sydney

Mount Pearl

Page 18

Supply Post · supplypost.com

March 2020

Interprovincial Trade Ranking: Minister Fir 339 Sumas Way, Abbotsford

604-850-3601 Ask us about our 6-month rent to own program for ALL new Hyundai AVAILABLE construction machines! FOR RENT Morooka Rubber Track Carriers offer excellent load capacity & traction that take you where other machines cannot go!

Minister of Economic Development, Trade and Tourism Tanya Fir issued the following statement on Alberta leading the country in interprovincial trade: “Today, the Montreal Economic Institute released its rankings of interprovincial trade, and I am proud that Alberta is awarded first place. “Our government has 592 Lilac Cres., Campbell River, BC V9W 7G6

moved Alberta from having the third highest number of exceptions to having the fewest – and today’s firstplace ranking is a testament to our bold action to establish a freer economy. “Free trade between provinces is vital to creating jobs and growing Alberta’s economy. Internal barriers to free trade are Continued on page 24

SARATOGA

VENTURES LTD. WE SPECIALIZE IN USED PARTS & ATTACHMENTS FOR THE LOGGING INDUSTRY!!

We offer a wide variety of sizes to ensure we can equip you with the right machine. HYUNDAI HX220L - Hyundai excavators are known for fast cycle speeds, impressive hydraulic power and precision control. Adding to that success formula, the Hyundai HX series features eco-friendly, high-performance engines that meet Tier 4 Final emission requirements. At Hyundai, reliable productivity is more than just a promise. The robust upper and lower frame structure can endure external shock and heavy workloads for many thousands of hours.

EQUIPMENT FOR SALE:

CALL MOROOKA MST1500VDR 18'6" L X 8'6" W X 10' H, WEIGHS 28,000 LBS., ROTATES 360°, 6.2 PSI GROUND PRESSURE, CARRIES 7 YARDS, CARRIES 15,435 LBS. MAX LOAD WEIGHT

HYUNDAI R35Z-9A - Hyundai 9A series compact excavators bring big power to small spaces. Each model features a Tier 4 Final engine that provides impressive performance and reduced fuel consumption. You’ll appreciate the hefty power, durability and reliability of these compact machines, along with their ability to work productively in confined spaces.

CALL MOROOKA MST2200VDR 19'8" L X 9'8" W X 10'2" H, WEIGHT 35,000 LBS., ROTATES 360°, 6.2 PSI GROUND PRESSURE, 10 YARDS HEAPED CAP, 22,000 LBS. MAX LOAD WEIGHT

• 2006 Linkbelt 210 Hoe Drill, Machine has 12,200 Hrs. Coastal Drill & Compressor Drill pkg. was put on machine in 2016. There is 765 Hrs on Drill pkg., Hammer is a Atlas Copco 1238 w/ 350 Hrs on it. All the cylinders were done in 2016; when the machine was converted, Pump was replaced 1,500 Hrs. ago, Engine was replaced w/ a new crate engine. Engine has less than 5 Hrs ...........................................................................................$310,000. • 1996 Cat 980F Wheel Loader with Weldco Beales log grapple.... ............................................................................................$40,000. • 1973 Pacific P16 Conventional Log Truck with 60 ton Pacific log trailer, Detroit 12V71N engine, Allison CLBT6061-6 electric shift trans, Clark BD91 drive axles ..............................................$75,000. • Pacific P16 Pre-Load Log Truck (no trailer), Detroit 12V71N engine, Allison CLBT5960-6 air shift trans, 90" track Clark BD71 drive axles .........................................................................$32,500. • 1988 Madill 075 Super Snorkel mounted on a 085 tracked carrier ............................................................................................$80,000. • 1980 15ft Westcoast Winder with a Detroit 471 engine and a Hydro-drive. Both the drive and the engine were replaced in 2017 ......................................................................................$39,500. • 1991 Madill 123 Grapple Yarder. This machine was Remanufactured at T-Mar Industries in 2014, It was re-powered w/a 12.7L Detroit Series 60 and Allison transmission, New rotek, new cab and control system, Winch re-bearing and all gears inspected, Pumps and travel motors done, has been out working for the past two years and has 2,860 hrs on it since it came out of T-Mar .................................................................................$850,000. DISMANTLING FOR PARTS:

CALL

HYUNDAI HL955 – Hyundai HL900 series wheel loaders deliver maximum

performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. The HL900 series offers unbeatable value!

MOROOKA MST2200VD 20'6" L X 9'1" W X 10'4" H, WEIGHS 31,000 LBS., 5.7 PSI GROUND PRESSURE, 10 YARDS HEAPED CAP, CARRIES 24,225 LBS. MAX LOAD WEIGHT

CALL HENRY 604-850-4645

FOR MORE INFO CALL: BOB • 604-220-2174 OR HENRY • 604-850-3601 EXT 226

www.handlersequipment.com

• Pacific P16 Log Truck and Trailer • Excavator Bkts • Madill Parts: 009, 044, 075 (Rubber & Trk) • Clark Axle Components & Parts: BD 71,000 & 91,000 • Komatsu PC400-5

TOLL FREE 1-888-668-1611 Phone: 250-286-3211 • Fax: 250-286-3284

svl@saratogaventures.com | www.saratogaventures.com

March 2020

Supply Post · Our Readers Are Your Buyers

Page 19

INLAND EQUIPMENT SALES www.inlandequipment.com | sales@inlandequipment.com | 150 Industrial Place, Penticton, B.C. Call Vic Kampe For Details | Ph: (250) 493-6791 | Fax: (250) 492-2762

FEATURED UNITS FOR SALE, RENT or RENT TO OWN

2 AVAILABLE 2014 Volvo VHD Triaxle Water Truck 36,711 km, Neway susp. Wabash tank, plumbed for pup ...$149,000.

2014 Cat 660S Watertruck, 21,600 Miles, Front, Rear and Side Spray, Hose Reel .........................$149,000.

40 NEW EXCAVATORS TO CHOOSE FROM

EXCAVATORS/FORKLIFTS 2013 John Deere 130G, 2 Buckets, 5,985 hrs ........................................................... $100,000. 2014 Bobcat E85M Excavator, Thumb, A/C, Dozer, 1,319 Hrs ..................................................... Call. 2012 Bobcat E80 Excavator, Thumb, A/C, 1,377 Hrs. ............................................................. Call. 2015 Bobcat E63 Excavator, Thumb, A/C Dozer, 972 Hours .................................................... Call. 2014 Bobcat E55 Excavator, Thumb, A/C, Dozer, 1,363 Hours ................................................. Call. (2) 2015 Bobcat E35 Excavators, Thumb, A/C, Dozer, 545-295 Hours ................................. Call. (2) 2015 Bobcat E26 Excavators, Thumb, A/C, Dozer, 295-427 Hours ................................. Call. 2010 Bobcat E32M Excavator, 2,600 hrs, 7,000 lb ............................................................. $36,000. (2) Takeuchi TB16 Excavators ....................... Call. 2013 Terex TC16 Excavator, 3,800 lbs, cab, 670 hrs ............................................................... Call.

........................................................... $124,000. 2015 Bobcat S630, 2sp, Hyd Q/C, A/C. 2112 hrs. ............................................................. $38,500.

2013 Cat 924K, 1,900 Hrs, A/C Brofil Clean Air, Ride Control, Rear Camera ....................................... P.O.R.

TRUCKS 2013 International 4300 Water Truck A/T, New Tank, Front, Rear, Side Spray .............. $71,000. 2013 IHC 4400 S/A Water Truck, New tank, Front, Rear, Side Spray .................................. $71,000. 2012 IHC 4300 S/A Water Truck, New Tank, Front,

FOR RENT OR SALE Sizes Available: ZX245, ZX345, ZX135, ZX300, ZX35, & ZX210 2012 Bobcat T750, Cab, 2,000 Hrs ......... $46,000. (2) 2005 Cat 246B Skid Steer, closed cab ....Call. 2004 Cat 287 Skid Steer, rubber tracks, 1,300 hrs ....................................................................Call. 2012 Cat 972H, 5,000 hours, E.Steer, autolube, .... .............................................................$175,000

GRADERS & DOZERS

CRAWLERS/WHEEL LOADERS/SKID STEERS 1981 Cat 966D Bucket Machine, 40% Tires ... Call. 1985 Cat 966D Bucket or Grapple .................. Call. 1988 Cat 966E Bucket Machine, 3rd Valve ..... Call. 1978 Cat 966C, Forklift sideshift, fork adjust . Call. 2014 Cat 950K Loader ................................... Call. 2013 Cat 924 K Loader 1,910 hrs, auto lube, brofil clean air system, ride control, emergency shut off

CRUSHERS FOR SALE 5 Surge Bins, 1 Jaw, 6 Cones and Screen Decks

2004 Cat 140H 17.5x5 Tires New, 7,800 hrs ............................................................ $110,000. 2007 Cat 160H Ripper, snow wing, 8,900 hrs ............................................................ $119,900. 2007 John Deere 872D, AWD, 7,147 Hrs, tires 4 @ 100%, 2 @ 80% .............................$110,000. 2004 John Deere 772CH, Ser. II, AWD, ripper........ .......................................................... $105,000. 2008 John Deere 872D, AWD, 14’ MB, A/C, ripper ............................................................ $125,000. 2007 Cat 14H VHP, ripper, push block, 20.5 x 25 tires @ 60% (wing available) ......................Call.

Rear, Side Spray .................................. $69,000. 2009 IHC 4300 S/A Water Truck, A/T, New Tank, Front, Rear Side Spray......................... $69,000. 1984 P+H Omega 20 Ton Crane, 62’ Boom, 20.5x25 Tires ....................................... $24,900.

BELLY DUMPS, LOW BEDS & TILT TRAILERS 1990 Peerless 50 Ton Tridem D/D Lowbed, 6’6” Neck Ext. 10 x 21 Deck, Beaver Tails, Detach ....... $44,900.

CRUSHING EQUIPMENT 2001 2045 Screen & Cone Deck, no feeder, 2-100hp motors .................................$225,000. 2007 MVP 450 Cone (tri axle), 2-200hp motors ..........................................................$350,000. 1995 Surge Bin (In and Out) (fuel tank) ....$25,000.

ROLLERS/PACKERS/CRUSHING & PAVING (2) 2007 IR SD45D-TF, 54", w/shell kits . $62,000. 2007 Powerscreen 1800 Warrior, 2,587 hrs . $150,000. 2007 Fintec 542, 5'x12' 2 deck screener ... $130,000. 2013 Dynapac CA2500D, 640 Hrs .......... $85,000.

1984 AM General 6x6 4000 gal Heated Tank Off Hwy truck, Low Miles .......................... $25,000. 2014 Volvo Tri-Axle 4800 Gal Water Truck, low miles, 435 HP, 2 available ................... $155,000 2015 Western Star 4000 Gal Potable Water Truck, 500 HP, 18 Sp, 36,000 Km.............. Call. 2011 Ford F750 S/A Dump Truck, 200 HP, 6 Sp, 10’ Box ....................................................... Call. 1980 Grove RT740 40 Ton Crane, 4 section boom, 32’ jib, 4x4x4 ....................................... $39,000. 2014 Cat 660S Water Truck, 21,600 Miles, A/T, 20,000 F, 46,000 R ............................ $149,000. (2) 2014-13 Volvo A40G & F Rock Trucks, Tailgates 5,000 to 6,900 Hrs ..................... Call. 2004 Ford F750, 2,000 Gallon Water Truck, Front & Rear Spray, Hose Reel.................................. $47,500. 2005 Ford F750 Water Truck, 2,000 Gal., Front Rear Spray, Hyd. Brakes, 28,400 miles................ $49,000.

FEATURED RENTAL UNITS ★ RENT TO OWN ★ NEW

NEW

Hitachi ZX245LCs

2012 Cat 972H, 5,000 hours, E.Steer, autolube, .............................................................$175,000

Articulated Rock Trucks

Hitachi ZX210LCs

RENTALS AVAILABLE New Hitachi ZX300LC · New Hitachi ZX135LCs · New ZX60, ZX50, ZX35 and ZX26 ·Volvo and Cat Rock Trucks · 2014 Cat 950K Wheel Loader

CALL FOR OTHER ADDITIONAL RENTAL UNITS

Page 20

Supply Post · supplypost.com

Continued from page 14

the Insurance Institute for Business and Home Safety (IBHS). It laid down a set of criteria to design buildings to meet higher standards when it comes to natural hazards. When it

comes to base flood elevation or loading or whatever the case, it ups the requirements.” There is a payoff for adopting higher standards. “There’s some research that points to mitigating

disasters in advance pays off,” says Lemay. “The National Institute of Building Sciences has released data that shows there is a significant savings for spending money on designing buildings beyond code. For

March 2020

example, for every dollar spent designing a building to mitigate against storm surges, it yields $7 in cost savings when responding to the natural disaster. Wind and flood has a payback ratio of 5:1 and fires

and earthquakes have a Incentivizing desired payback ratio of 4:1. We behaviors is a means of should spend the money changing bad behavior. upfront—not after.” Several states in the southeast US, for example, have 3. Incentivize Companies adopted legislation that To Build To Higher compels insurance compaStandards Continued on page 25

For Total Lube Solutions,

GO WITH THE FLO! √ Autogreasers for Your Mobile Equipment √ Fluid Handling Equipment for Your Garage √ Our Mobile Workshops Come to You

Generator Sets & Power Units

CAT • PERKINS • CUMMINS • DEUTZ • JD DIESEL SERVICE • REPLACEMENT ENGINES NEW & RECONDITIONED CUMMINS GENSETS: 250kW - 800kW, 480V/600V - 3-ph., Avail. w/ weatherproof enclosure/container & Subbase fuel tank.............. CALL RECONDITIONED CAT GENSETS: 150kW 600kW, 480V/600V - 3-ph., Avail. w/ weatherproof enclosure/container & Sub-base fuel tank.................... CALL NEW & RECONDITIONED CUMMINS GENSETS: 50kW - 200kW, 120V/240V - 1-ph., 480V/600V - 3-ph., Avail. w/ weatherproof enclosure, Subbase fuel tank & trailer......CALL

VISIT US AT TRUCK WORLD 2020 - BOOTH #5638

519-688-6973 | bkmachinery@execulink.com RR#1 NORWICH, ON N0J 1P0

Mississauga: 1.800.668.5458 Winnipeg: 204.832.3040 sales@flocomponents.com www.flocomponents.com

VISIT OUR WEBSITE FOR OUR FULL INVENTORY:

FORESTECH EQUIPMENT

WWW.FORESTECH.CA Contact Tim Lloyd : 250-703-3551

4335 BARGE TERMINAL RD. CAMPBELL RIVER, BC

$47,500 1998 Caterpillar D300E Articulated Dump Truck,

c/w: 23.5X25 tires. 18,032 hours.

WHEEL LOADER 2007 John Deere 844J Wheel Loader c/w: WBM M33 log grapple, third valve, ROPS cab, ride control, 29.5 X 25 tires, forestry guarding package. 15,145 hrs. Recent trans. r/b, brake work, r/b hyd. pump, good rubber! ......................................................... $199,500.

CALL 2017 Link-Belt 370X2TLW, c/w: T-Mar grapple, heel rack, LL front, west coast elevated rear entry cab on riser, Isuzu eng., forestry guarding pkg., high walker U/C w/ 28” DBP. 5,3XX hours.

2017 Link-Belt 350X2TLW c/w: T-Mar grapple, heel rack, LL front, west coast elevated rear entry cab on riser, Isuzu eng., forestry guarding pkg, high walker U/C w/ 28” DBP, 4,3XX hours.

$67,500 2007 Caterpillar D6N LGP Crawler Tractor c/w: 6 way blade, sweeps, ROPS cab with guarding, System One U/C w/ 34” single bar pads, Caterpillar D6N hydraulic ripper. 17,739 hrs.

LOG LOADERS

FORESTRY EXCAVATORS

YARDERS

MARINE EQUIPMENT

2014 Kobelco SK350MkIVLL, c/w: T-Mar grapple,

2013 John Deere 2954D “Road Builder” c/w: 42” dig bkt, 64” CU bkt, 52” T-Mar grapple & heel rack, Q/C, hyd. thumb, aux. hyd (plumbed for grapple & heel rack), hoe front, forestry cab on 7” riser, forestry guarding pkg w/ aux. fuel tank, high walker undercarriage with 28” DBP. 7,7XX hrs. Recent new U/C and linkage R/B................................... $224,500.

1988 Madill 122 Swing Yarder c/w: Grapple, lines, 57’ boom w/ fairlead, split cab, 8V92 eng., Wheeler air system update, two guy lines, mounted on Madill 087 hydraulic drive carrier w/ 32” TBP. Work orders, good operating condition. ...........................$399,500.

West Coast 15’ Sidewinder Boom Boat c/w: 4-71 engine, Olympic standard drive, VHF, half cab with lights, cab heater, bilge pump, Critical grade exhaust ...........................................$34,500

heel rack, LL front, west coast elevated rear entry cab on 72” riser, Cummins eng., forestry guarding pkg w/ aux. fuel tank, high walker undercarriage w/ 30”

2004 Caterpillar 980GSII FM c/w: WBM 20’ double bar pads. 3,180 hours on rebuild by T-Mar log grapple, third valve, 29.5X25 tires ROPS cab, Ind. in 2014. .................................................. $87,500. Command Steering, forestry guarding package w/ aux. 2004 John Deere 3554LL, c/w: T-Mar grapple, heel counterweight. 20,04X hours. ........................ $99,500 rack, LL front, west coast elevated rear entry cab on 1992 Caterpillar 980F “Logger” c/w: WBM log grapple, third valve, ROPS cab, 29.5X25 tires, forestry 72” riser, forestry guarding package w/ aux. fuel tank, guarding pkg w/ aux. counterweight ............. $34,500. high walker undercarriage w/ 28” DBP ......... $89,500. 1990 Caterpillar 980C, c/w: WBM M33 log grapple, 2002 Madill 3800C c/w: T-Mar grapple, heel rack, third valve, ROPS cab, 29.5X25 tires, forestry LL front, west coast elevated rear entry cab on riser, guarding pkg w/ aux. counterweight. ....................CALL Series 60 engine, forestry guarding package, high FELLER BUNCHERS walker u/c with 28” double bar pads .............$174,500 2005 Valmet 475EXL, c/w: Quadco OFH22B 22” 2000 Hitachi EX370LC-5LL c/w: Pierce grapple,heel felling head, 360 degree wrist, ROPS cab, Cummins eng., fire suppression, Pro Heat, self levelling rack, log loader front, west coast elevated rear entry undercarriage w/ 28” SBP. 10,645 hours. Recent new cab on 72” riser, forestry guarding pkg w/ aux. fuel pumps, work orders. .................................... $124,500. tank & aux. counterweight, high walker u/c w/ 30” 2005 Madill T2250B c/w: Madill 24” felling head, 340 degree wrist, ROPS cab, Detroit Diesel Series 50 eng., self levelling undercarriage w/ 28” SBP.13,531 hours. 500 hours on new eng., recent new pumps ........................................................................$144,500

CALL

CALL 2004 Madill 3800C Processor, c/w: 2016 Southstar QS605 grapple proc. (6,466 hrs), log loader front, west coast elev. rear entry cab, Series 60 eng., forestry guarding pkg, HW U/C w/ 28” SBP. Can be viewed working.

DBP. Recent new tracks, boom foot R/B....... $89,500. 1994 Madill 3800, c/w: PMW grapple, heel rack, LL front, west coast elevated rear entry cab, Cummins eng., high walker undercarriage with 28” DBP.....CALL

2006 Komatsu PC300LL-7 “Road Builder” c/w: 44”Accurate dig bkt, PMW heel rack (no grapple), Accurate Q/C, Accurate hyd. humb, hoe front, cab on 15” riser, forestry guarding pkg w/ aux. fuel tank, high walker undercarriage w/ 28” DBP ..........$34,500 1992 Caterpillar FB300B “Backspar” c/w: Dig bkt, Q/C, hyd. thumb, hoe front, single shive backspar attachment, forestry cab, forestry guarding package, highwalker U/C w/ 24” SBP. Work orders. .....$44,500 OFF HWY TRUCKS & LOWBED TRAILERS Pacific P-16 T/A Conventional Truck & Knight 100 Ton T/A Lowbed Trailer, c/w: 12V71N, Allison 5960 trans., spring susp., Clark BD91 axles, 14:00X25 tires, 13’ bunk on turntable, log bunk hitch, 21’3” L X 14’ W wood lined deck, KB axles, 14:00X25 tires, manual beaver tails, push block. ................ $104,500. Kenworth 849 T/A Truck & King TD100RG T/A Lowbed Trailer, c/w: Cummins NTC 400 eng., 13 X 4 trans, spring susp., Clark BD90 axles, 14:00X25 tires, 11’W X 20”L wood lined deck, Timken axles, 14:00X25 tires. ...............................................$49,500

1986 Madill 143 Swing Yarder c/w: Grapple, spare grapple, lines, rigging, 70’ boom w/ fairleads, cab on 36” riser, Cummins K model eng., 45’ gantry, two guy lines, mounted on Madill B8H hyd. drive carrier with 32” DBP. ...................................................... CALL

West Coast 15’ Sidewinder Boom Boat c/w: 4-53 diesel engine, Allison PTO, Olympic hydro drive...............................................................CALL

1979 Argo 24’ Aluminum Crew Boat c/w: Bow lights, GPS/Chartplotter/sounder, Si-Tex radar, 2 X VHF radios, 10 pass capacity, trim tabs, 2 X 1983 Madill 044 Swing Yarder, c/w: Grapple, lines, bilge pumps, Mercruiser V8 I/O power. ........CALL rigging, 60’ boom, cab on 36” riser, Quincy comp., Cat eng., mounted on Madill B-8 crawler carrier/ 24” TBP. Cat 330 backspar & Cat D7G dozer also $59,500 available. .............................................................. CALL ROCK DRILLS Finning / Morgan Power Apparatus M-32F Tank Drill, c/w: PR66 hammer, 22’ steel slide, 3800 square boom, ROPS cab, 800 CFM comp., Cat 3306DI eng., aluminum mag., mounted on M-32 or M-40 crawlercarrier. 1 of 2 units avail. $49,500. Each MISCELLANEOUS 1983 Caterpillar 14G Motor Grader c/w: 14’ MB, accumulators, cab, 16:00R24 tires. ............... $49,500

2006 John Deere 350D Hydraulic Excavator 42” BMI dig bkt, 68” BMI CU bkt, Q/C, CWS hyd. thumb, cab guard, catwalks, std U/C w/ 32” TBP. 11,130 hours. Can be viewed working.

March 2020

Supply Post · Our Readers Are Your Buyers

Page 21

682 Okanagan Ave. E., Penticton, BC, Canada

1-866-344-6480

cturchak@brutusbodies.com

YOUR TRUCK BODY BUILDING SPECIALISTS MARANDA M90 SLIDE-IN BODY FOR MID-SIZE 6’ PICKUP (UNIT 4370)

MARANDA M170 SLIDE-IN BODY FOR FULL-SIZE 8’ PICKUP (UNIT 4372)

MARANDA X240 SLIDE-IN BODY FOR FULL-SIZE 8’ PICKUP (UNIT 4369)

MARANDA V375 SLIDE-IN BODY FOR FULL-SIZE 8’ PICKUP (UNIT 4366)

BRUTUS ETV2 EMERGENCY TRANSPORTATION BODY FOR SHORT OR LONG BOX PICKUPS (UNIT 4238)

2015 RAM 3500 W/10’ FLAT DECK (UNIT 22682)

2019 FORD F-350 CREW CAB W/9’ TIRE BODY, VMAC VR70, TOMMYGATE (UNIT 24186)

2019 FORD F-550 CREW CAB W/11’ SERVICE DECK, MILLER 302 AIR PAK, COBRA 5500 (UNIT 24977)

2019 FORD F-350 CREW CAB W/ MARANDA V375 SLIDE-IN BODY (UNIT 4368)

2019 RAM 5500 XLT W/10’ SERVICE DECK, VMAC VR70, FASSI F85B.0.24, TOMMYGATE (UNIT 2516)

2019 FORD F-450 CREW CAB W/MARANDA V375 SLIDE-IN BODY (UNIT 4367)

2019 FORD F-550 CREW CAB W/RAFNA HI-RAIL, 9’ SERVICE BODY, VMAC VR70, COBRA 3300 (UNIT 24897)

2019 FORD F-550 W/11’ SERVICE DECK, MILLER 600 AIR PAK, AUTOCRANE EHC-6 (UNIT 4061)

2019 FREIGHTLINER M2 4X4 EXT. CAB W/12’ SERVICE BODY, VANAIR RS85, COBRA 11000 (UNIT 3682)

2019 INT’ WORKSTAR 4X4 EXT. CAB W/12’ SERVICE BODY, VMAC RAPTAIR MF, COBRA 11000 (UNIT 4126)

2019 FREIGHTLINER M2 4X4 EXT. CAB W/12’ SERVICE BODY, VANAIR RS85, COBRA 11000 (UNIT 3901)

www.brutusbodies.com

Page 22

Supply Post · supplypost.com

Brandt Group Acquires Nortrax Improving Support Across Canada Landmark deal unites John Deere and construction and forestry dealerships creating coast-to-coast dealer network

n late 2019, the Canadian construction equipment industry saw a major shift as the Brandt Group of Companies announced that they had reached an agreement to acquire the assets of Nortrax Canada Inc. and Nortrax Quebec Inc. from John Deere. The landmark deal was a strategic move by the company to unite all John Deere Construction & Forestry dealerships in Canada under the Brandt banner,

creating the country’s first and only coast-to-coastto-coast equipment dealer network. The agreement has opened the door for the Regina-based company to deliver seamless access to Deere products, parts and support services to Canadian contractors. “The addition of Nortrax’s impressive branch and distribution network gives us an unprecedented opportunity to offer customers anywhere in

Canada a consistent customer support experience, no matter where their projects take them,” said Brandt president and CEO, Shaun Semple. “We are very proud to deliver the quality products and support services that Canadian customers rely on for their success, every single day.” With the acquisition of the Deere-owned Nortrax locations in Ontario, Quebec and Newfoundland and Labrador, Brandt now

BRANDT TRACTOR LTD.

Brandt’s recent purchase of Nortrax will enable them to provide consistent support to construction and forestry customers through 56 branches across Canada.

owns and operates 56 John Deere construction and forestry dealerships with over 100 service points across Canada and over $1 billion in new-equipment inventory. The company also employs more than 800 certified service technicians and delivers parts anywhere in Canada from their $90+million inventory — the largest in the industry. The deal has further established the firm’s position as a premier privately-held Canadian company and the largest John Deere dealership in the world. The acquisition of Nortrax was a logical next step for the Regina-based company, the latest in a series of expansions beyond the borders of Saskatchewan, starting 25 years ago. The story of the Brandt Group of Companies’ journey from small-time local company to major equipment dealer and industrial manufacturer began in 1932 with Brandt Electric, a small electrical contracting firm that later expanded into ag-

March 2020 ricultural manufacturing as Brandt Machine and Manufacturing. Gavin Semple, the father of current president and CEO Shaun Semple, began working in sales with the company in 1972 and rose to become president and general manager by 1976. He soon acquired controlling interest and was joined by his son Shaun in 1984 when the company had revenues of only $6 million dollars. In 1992, the Semples created a new division, Brandt Tractor Ltd., and became John Deere’s exclusive construction and forestry equipment dealer in Saskatchewan. They expanded the business into Manitoba and southern Alberta in 1995 with the acquisition of three dealerships and again in 1999 when, with oil prices low and the industry downsizing, Shaun invested in the future, acquiring dealerships in Edmonton, Fort McMurray and Grand Prairie, Alberta. By 2001, a dealership had also been established in Milton, Ontario and in 2002, Brandt was able to acquire 13 dealerships in British Columbia. In 2013, five more dealerships were added in the Atlantic Canada region, bringing the total to 27 and making Brandt the largest John Deere construction and forestry equipment dealer in the world. From day one, the Semples have focused on customer support as Brandt’s number one priority. To help ensure the success of their customers, the company has expanded the breadth of its offering significantly over the years to include significant offerings from some of the top equipment suppliers in the world in roadbuilding (Wirtgen, Hamm, Vögele, Kleemann), underground excavation (American Augers, Trencor, Ditch Witch), forestry (Hitachi), truck rigging and specialized transportation (Camex — acquired by Brandt in 2018), positioning technologies (Topcon, iVolve), machine monitoring (JDLink, FleetWise), utility and heavy haul trailers, and more. The company recognized along the way that they could add additional value for their customers by leveraging their extensive manufacturing capabilities to design and produce built-for-purpose attachments for the equipment

that they sell. Their Brandt Equipment Solutions division now markets a 3000+ unit catalogue of Deereoptimized custom material handling attachments such as buckets, blades, thumbs and couplers to companies across Canada and the U.S. and in select markets around the world. They also do machine conversions for specialized applications such as oil and gas pipeline installation and heavy-materials handling where John Deere does not otherwise offer a standard solution. “We have a lot of customers working in highlyspecialized environments where it is necessary to customize standard construction equipment to meet their production requirements,” said Neil Marcotte, senior VP of Sales – Manufactured Products, Brandt. “For example, we have customers that need heavyduty units to move large payloads in rough terrain. Deere’s wheel loader chassis is a great platform for that, so we’ve worked with their engineering team to redesign and safety-certify them for duty as Brandt Rough Terrain Forklifts. All of the modifications are done at one of our plants here in Regina.” In addition to its investment in the construction and forestry equipment business, the company has numerous additional divisions serving customers in Canada, the US and more than 20 countries around the world; serving the construction, forestry, agriculture, rail, mining, steel, and energy industries with unique custom products. Today, the Brandt Group of Companies is comprised of Brandt Agricultural Products, Brandt Engineered Products, Brandt Equipment Solutions, Brandt Road Rail, Brandt Positioning Technology, Brandt Truck Rigging & Trailers, Brandt Finance, Brandt Developments Ltd., Brandt Road Technology, Brandt Mineral Technology, and Brandt Tractor Ltd. “At the end of the day, we’re here to help Canadian contractors succeed, pure and simple,” concluded Semple. “We now have the reach to work shoulderto-shoulder with them anywhere they go in Canada. That is very satisfying.” b Source: Brandt

March 2020

Supply Post Â· Our Readers Are Your Buyers

Page 23

WE KEEP

CANADA

ON TRACK

Come see us at ConExpo! Booth F6926

Call: 800-365-7260 Visit: morookacarriers.com

Page 24

Supply Post · supplypost.com Continued from page 18

SPACE IS NOW 80% SOLD!

estimated to cost Canada’s economy between $50 billion and $130 billion every year – that’s up to $9,300 per Canadian household. “Albertans believe in

March 2020 the jobs and economic growth that come from increased free trade in Canada. Our government will continue to show bold leadership by eliminating barriers between provinces. We know that

Service Centres: Langley, • Chilliwack • Parksville

removing exceptions will bring jobs and investment to Alberta, and we will move unilaterally until other provinces follow our lead.” b Source: Gov.ab

www.rollinsmachinery.com E-mail: jeff@rollinsmachinery.ca

Phone: 604-533-0048

DEMOS AVAILABLE NOW

Other products available contact us today!

North America’s largest forestry event comes to the nation’s capital!

Johnston Sweepers are available in: • Regenerative Air • Mechanical • Vacuum

Service Centres:

Langley • Chilliwack • Chemainus

A Canadian Woodlands Forum Flagship event and North America’s largest, unique outdoor forestry show!

LIVE EQUIPMENT DEMOS, IN-WOODS & IN ACTION!

FOR MORE INFORMATION AND TO SECURE YOUR EXHIBIT SPACE AT THIS PREMIER EVENT, PLEASE CONTACT: MARK CUSACK, National Show Manager mcusack@mpltd.ca • 1-888-454-7469

REGISTRATION OPENING IN APRIL 2020 - Stay tuned to the website and social media for updates:

www.DEMOInternational.com

1-800-665-9060

March 2020

Supply Post · Our Readers Are Your Buyers

SMS Equipment HET Wins Top Award For Canada At SMS Equipment, we aim to be the number one equipment and solutions provider to our customers. We are proud to announce that the Associated Equipment Distributors (AED) has named SMS Equipment Advanced Certified Technician Clayton Kennon as AED’s inaugural Technician of the Year for Canada. “The AED Foundation is excited to honor technicians, like Clayton, for their hard work and passion to the equipment industry through our Technicians of the Year Awards,” said Jason Blake, Executive Vice President and COO of The AED Foundation. “We would like to thank SMS Equipment for participating in our inaugural award, and we look forward to growing this recognition moving forward.” “Clayton is a leader, mentor, and go-to guy for our technicians,” says Larry Gouthro, General

Manager, SMS Equipment. “He takes new employees under his wing and starts them off in the right direction. He makes them feel like part of the team. We can always rely on Clayton in a tough situation or tight deadline to pull through. His dedication is contagious.” Kennon was also nominated for his hard work and dedication that contributed to the success of his department, most significantly, the organization and planning of the parts for new builds. “The time and effort put in by Clayton on a project building over 100 trucks increased our production time. He observed the struggles the other crews had when it came to putting kits together for the welding department, and came up with a checklist with pictures, complete with sign off, to assist with this shortfall. Without this extra effort, it would have been challenging to meet our dead-

Continued from page 20

ing buildings to higher standards.

nies to offer discounts to companies who build to FORTIFIEDTM standards. FEMA (Federal Emergency Management Agency), this year, will be for the first time offering $250 million in BRIC (building resilient infrastructure and communities) grants. Congress passed in 2018 that six percent of the disaster relief budget line be dedicated to mitigation grants that allow for owners to be reimbursed for design-

4. Build With Robust Materials Standards that go above and beyond building codes demand materials that can resist high winds, flooding and fire. “Concrete does not rust, rot or burn. It is a strong resistance to most natural hazards,” says Lemay. “Concrete systems can offer Continued on page 26

lines directly following the Fort McMurray fire. Whenever there is a major technical issue, Clayton is actively involved,” said Ryan Medendorp, Superintendent of Trucks and Facilities. The 22-year veteran equipment technician spends most of his time servicing heavy equipment between Fort McMurray, AB and northern Saskatchewan. Kennon grew up on a family farm in rural Saskatchewan, Canada, and credits the work ethic he learned from his parents to receiving this award. “Growing up on the farm, you never quit until the job was done,” he says. “So, seeing my parents work that way, it just came naturally.” After graduating high school in 1997, Kennon worked as an apprentice until 2000. He received his Journeyman Agriculture ticket in 2001 and went on to challenge the heavyduty ticket in the fall of 2007 before joining SMS Equipment in December 2007. As an SMS Equipment Advanced Certified Technician, Kennon is continuously learning about the latest equipment and technologies. The courses he takes allow him to have a better understanding of the equipment he services – a vital investment in the rapidly-changing world of heavy equipment. “The biggest challenge in the tech trade is ev-

Page 25

erything changing all the time,” Kennon says. Kennon really enjoys the challenges of his role, trying to troubleshoot a problem and the satisfaction of seeing it fixed. “I find it’s a lot like be-

ing a doctor,” he says. “The machine comes in broke, you figure out what’s wrong, do the repairs, and have the satisfaction of it driving away.” When it comes to the constantly growing market

for autonomous vehicles, Kennon doesn’t just use his expertise for servicing them. “I help build them,” he says. b Source: SMS Equipment

$119,900

$159,900

2005 CAT D6R XL C/W P.A.T. DOZER, FULL GUARDING, DIFF. STEER, REAR RIPPER, A/C & HEAT, BLADE RE-PINNED & RE-BUSHED, JUST OUT OF SHOP, READY FOR RENT OR SALE.

2012 DEERE 225DLC C/W 5,200 HRS, PRO LINK HYD. THUMB, Q/C, DIG BKT.

USED EQUIPMENT & MACHINERY FOR SALE OR RENT 2018 Hitachi ZX35U-5 + ZX50U-5 Cab, Air, Heat, Hyd. Thumb, Bkts ..................................................$FOR RENT 1989 Caterpillar D8N Crawler Dozer, c/w EROPS , full u dozer w/tilt,rear MS ripper, 85% U/C except pads .................................................................................................................................................................. $84,900 1999 Hitachi Ex225 USR LC-5, c/w 2 Bkts, Q/C, Thumb, New Pins And Bushings, End Of Stick, Resealed Contact Valve And Cylinders ................................................................................................................... $49,900 2005 Hitachi ZX330LC, c/w Q/C, hyd thumb, dig bucket 11,000 hrs ..................................................... $89,900 2008 Cat 980H, 14,000 hrs, recent trans., new L4 tires, on-board scale, rent or rental purchase available ................................................................................................................................................................. $154,500 2006 Hitachi ZX350 LC-3 EROPS new rails & sprockets, hydraulic quick coupler, hydraulic thumb, full guarding ................................................................................................................................... CALL FOR DETAILS (2) 2006 Volvo A30D Rock Trucks .................................................................................... AVAILABLE FOR RENT 2002 Cat 980G Loader, new 29.5R25 tires, GP bucket w/BOE..............................................................$109,900 Loader Tires 17.5 x 25 - 29.5 x 25 ..................................................................................................................$POR

★ JAW CRUSHER FOR RENT — CALL FOR AVAILABILITY ★ FOR RENT ONLY 1-800-663-5454 2012 Deere 225DLC 2013 Hitachi ZX135USBL-3

Terex J1170 Jaw Crusher 2018 Hitachi ZX50U-5

2018 Hitachi ZX35U-5 (2) Volvo A30D

MACHINERY SALES & RENTALS • KELOWNA, B.C. PHONE: 250-769-5454 • FAX: 250-769-5005 continentalequipment.ca ALSO IN STOCK:  Filters  Cutting Edges  Bucket Teeth  Equipment Attachments  OTR Loader & Rock Truck Tires

Current stock for excavators Parts available for all models & generations!

Refurbished:

Used:

Aftermarket:

Rotary manifolds, hydraulic cylinders, final drives, & more...

Cab assemblies, bucket pins, hydraulic cylinder parts, & more...

Final drives, swing bearings, H-links, & more...

“attachment specialists”

780-962-8586 ATTACHMENTS BLADES angle, straight, & U for all sizes RIPPERS single or multishank for all sizes WINCHES rebuilt, complete for all sizes

EMAIL: CRAWLERSALES@TELUS.NET FAX: 780-962-9465 Edmonton, AB

PARTS NEW, USED & REBUILT PARTS & COMPONENTS

KOMATSU 100 units dismantled CATERPILLAR 15 units dismantled CARCO - PACCAR 75 winches dismantled ALLIED - HYSTER 75 winches dismantled

E-mail: usedparts@brandt.ca Inventory: brandt.ca/ValueParts

1-877-685-4886

Page 26

Supply Post · supplypost.com

Continued from page 25

greater disaster resilience.” And, it is not just traditionally formed concrete that is resilient, but also bearing wall systems such as insulating concrete forms and tilt-up concrete, which also

have other unique benefits such as energy efficiency and noise reduction. Concrete has resistance to flooding; FEMA recognizes it as a material that can be used below flood elevation. And it offers re-

sistance to high winds. “During a hurricane, most of the damage is caused by flying debris. Texas Tech created a test that flung a 2x4 at 100 mph at walls and roofs in order to determine their resis-

tance,” says Lemay. “The tests show that the 2x4 goes through wood stud and steel stud walls, but it doesn’t penetrate concrete.” b Source: Conexpo

GETTING THE JOB DONE! Heavy Equipment, Road Building, Forestry, Aggregates & More

OVER 200,000 SQ.FT. OF EXHIBIT SPACE

STAY TUNED

March 2020

Syncrude Reaches Three Billion Barrels Of Production Syncrude produced the three billionth barrel of crude oil at its Mildred Lake upgrading complex in October 2019, surpassing a milestone not reached by any other single source of oil production in Canada’s history. “We are proud to celebrate this remarkable achievement with our employees and retirees, whose tenacity and knowhow enabled us to produce three billion barrels over the past 41 years,” says Doreen Cole, Syncrude’s Managing Director. Doreen also thanked valuable partners in the region and beyond who

helped contribute to this success which brings both economic and social benefits to our region, province and country. These partners include suppliers, contractors, Indigenous communities as well as local agencies and institutions. “You need strong partnerships to succeed and we’ve really benefited from productive relationships with so many different groups in the region,” she says. “This historic milestone could not have been achieved without their support. And it’s an achievement we share with all of them.” b Source: Syncrude

TO FACEBOOK & INSTAGRAM FOR FEATURE UPDATES!

SHOW HOURS

THURSDAY 9AM - 5PM | FRIDAY 9AM - 4PM

FOR RENT

MCCloskey J45 45 X 27 JAW CRUSHER

LIMITED TIME OFFER PRE-Register Online by March 20, 2020 and SAVE 50%! CONVENIENT ONLINE REGISTRATION AVAILABLE AT:

Langley, BC

Tel: 604-866-0482

NORSTONE EXCAVATING

FIXED MOUNT MG SUPERGRIP GRAPPLES For use with XR Rotators and Tiltrotator applications. – 6 to 25 tonne Excavators

HULTDINS.COM

March 2020

Supply Post · Our Readers Are Your Buyers

Page 27

Unreserved public equipment auctions 66 5+

CR AW LE RT RA CT OR S

Special limited-time financing offer! No payments for 120 days*

30 0+

AR TIC U TR LATE UC D KS DU MP

12 50 +

2012 Komatsu HM400 6x6 | Montreal

Volvo ECR235CL | Chilliwack

IM PA CT

40 CR +

55 +

US HE RS

HY DR A CR ULIC AN T ES RU CK

2015 & 2014 Kobelco SK140SRLC-3 | Chilliwack

Grove TMS 800E 80 Ton | Chilliwack, BC, CAN

2014 John Deere 50G | Grande Prairie

2019 Kenworth T880 | Grande Prairie

53 5+

Rubble Master RM100 | Montreal DU MP TR UC KS

43 0+

MI NI EX CA VA TO RS

Liebherr R952 HD | Toronto

71,580+ items in 135+ auctions including Toronto, ON Chilliwack, BC Grande Prairie, AB Montreal, QC Lethbridge, AB Brandon, MB

2015 Komatsu PC390LC-10 | Montreal

1 of 2 – 2016 John Deere 850K LGP | Toronto

HY DR AU LIC EX CA VA TO RS

Caterpillar D6T XL | Montreal

Mar 3–5 Mar 10–11 Mar 12–13 Mar 25–26 Mar 26 Mar 31

Financing & leasing available Up to 100% financing, with no money down.

Like us for news, video & photos facebook.com/RitchieBros

2019 International HX620 | Toronto

Bid in person or online

▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public ▸ Free registration

More items added daily

Call about selling: 1.800.211.3983

See full auction & equipment listings at rbauction.com

MV Dealer No. 4585592, Auction Company License #309645, Dealer License/Licence de commerçant 69767, Auction Company License #303043, MV Dealer #10539 | *OAC. Terms & conditions apply. See rbauction.com

Page 28

Supply Post · supplypost.com

L.S.W. Wear Parts Ltd. Becomes New Metso Dealer Metso’s North American aggregates distributor community is excited to welcome L.S.W. Wear Parts

incorporated in 1993. The company has grown over the years to be a major supplier of aftermarket parts to the mining, construction, forestry, and energy industries. To support their growLtd. of Eastern Canada. ing business and better L.S.W. is a second- accommodate future Metgeneration, family-owned so customers, L.S.W. will and operated business be opening a new Bend &

Band facility in 2020. The distributor has two current locations in Fredericton, New Brunswick, and Truro, Nova Scotia. “Our company’s philosophy has always been quality, value, and service to our customers,” said Gregg Carr, President of L.S.W. “The Metso line of products coupled with

March 2020 our new bend and band facility only furthers our commitment to better facilitate solutions for existing and new clients.” “We have found in L.S.W. a solid partner with a customer service focus,” said Jean Hebert, Vice President, Services Sales Canada at Metso. “We know that partnering

OPTIMIZE MACHINE PERFORMANCE WITH ESCO AND LSW WEAR PARTS

with them will provide customers with added value screening solutions.’’ L.S.W. will serve Metso customers in Nova Scotia, Prince Edward Island, New Brunswick, and Newfoundland and Labrador beginning January 1, 2020. b Source: Metso

ESCO® Attachments

ESCO® Manganese Crusher Wear Parts

Ultralok® Tooth System

lswwearparts.com

Fredericton, NB 506-458-5613

Truro, NS 902-895-4913

stop!

BIG NEWS:

TWIN DEER

IS FOR SALE!

After 45 successful years of serving North America and many other countries around the world, we’re looking to retire. This is an excellent opportunity for someone looking to start a new parts business or expand existing stock and grow your business. We have $1.5M worth of Parts & Attachments Inventory (John Deere, Hyundai). Willing to sell as: • Complete Operation • Property Only (appraised at $1.1M+) • Shop & Yard Equipment Only • Parts & Co. Name • Parts Only (Computer printout $1.2M (Negotiable) • Company Name Only (WorldWide Client List on Computer) • JD Speciality Tools Only • Shop Manual’s – Approx. 500+ Books (90% JD & CAT, 10% Hyundai & Misc.) Please, serious inquiries only Call Ted or Rick today to discuss.

780-486-0138 | 1-800-661-4634 | Ted@twindeer.com | Rick@twindeer.com

March 2020

Supply Post · Our Readers Are Your Buyers

JAKE PETERSON FOR SUPPLY POST

Atlantic Heavy Equipment Show Gears Up For Another Big Year In Moncton

The most comprehensive heavy equipment trade show in the region, with over three decades of success on the books, is planning its return to the Moncton Coliseum Complex this April 2 and 3. The Atlantic Heavy Equipment Show broke records at its last edition in 2018, attracting 14,800 visitors from across the Maritimes and beyond. The entire Moncton Coliseum complex will be filled with indoor and outdoor exhibits of machinery, products, and ser-

visitors.” The Atlantic Heavy Equipment Show has become a gathering place for road building, aggregate, construction and forestry professionals who look to this show to keep themselves apprised of the trends in their respective industries and to help them make purchasing decisions. Online pre-registration is now open for attendees to begin planning their visit. Pre-registration is $10.00 per person ($20.00 at the door) and covers both days of the event. The Atlantic Heavy Equipment Show has been owned and sponsored by the Atlantic Land Improvement Contractors Association (ALICA) since its inception in 1986. For several decades, ALICA has supported the construction and forestry industries by way of training, education and relevant industry discussion. ALICA is proud to give back to these thriving industries by sponsoring bursaries, scholarships and other initiatives, thus supporting the future of these trades. b

vices. “With only a few months until show open, everything is full steam ahead for this colossal event,” said National Show Manager Mark Cusack. “Over 200,000 square feet of big iron and high energy at this show continues to bring exhibitors and customers back year after year. More than 95% of the floor space is already spoken for, and a diverse base of exhibitors promises a full show floor and a wide variety of offerings for our Source: Master Promotions

HYDRAULIC BREAKERS

DESIGNED TO HANDLE THE TOUGHEST ROCK EXCAVATIONS AND LARGE CONCRETE DEMOLITION PROJECTS. 3 YR LIMITED WA R R A N T Y

DUAL SPEED IMPACT FREQUENCY ALLOWS THE HAMMER SPEED TO BE ADJUSTED FOR MAXIMUM PRODUCTIVITY.

Page 29

Endorsed by:

LIMITED TIME OFFER PRE-Register Online by April 17, 2020 and SAVE 50%! CONVENIENT ONLINE REGISTRATION AVAILABLE AT:

www.ExpoGrandsTravaux.ca Stay tuned to Facebook for feature updates!

SHOW HOURS:

Friday 9am - 5pm Saturday 9am - 4pm

Espace Saint Hyacinthe MAY 1-2, 2020 Saint Hyacinthe, Québec, Canada MAGNUM ATTACHMENTS WILL GIVE THE WORKING END OF YOUR MACHINERY SUPERIOR PERFORMANCE AND DURABILITY.

2214 9TH LINE, BRADFORD, ON L3Z 3T1

416.679.8752 | 1.877.640.2862 | FAX 416.679.8753

Produced by:

Page 30

Supply Post Âˇ supplypost.com

March 2020

brandtused.ca What are you looking for? Searching for used equipment just got a whole lot easier with advanced searches, currency conversion and monthly payment calculations. And every machine is backed by Brandt â€“ the best-trained and committed after sales support team in the business.

brandtused.ca | 1-888-2-BRANDT

March 2020

Supply Post Â· Our Readers Are Your Buyers

2012 CASE 580SN

Unit #: 0U564729 Hours: 1770 Location: REGINA, SK

$75,900

2013 DITCH WITCH SK755 Unit #: 2U000264 Hours: 743 Location: SURREY, BC

$24,500

2007 KOMATSU WA600-6 Unit #: 0U060326 Hours: 25533 Location: KAMLOOPS, BC

$65,000

2012 JOHN DEERE 872G Unit #: 1U643095 Hours: 9310 Location: SASKATOON, SK

$195,000

2013 CATERPILLAR 213EL Unit #: 0C000539 Hours: 7244 Location: EDMONTON, AB

$85,000

2005 CATERPILLAR D6R Unit #: RE000559 Hours: 13885 Location: EDMONTON, AB

$165,000

2013 JOHN DEERE 300DII Unit #: 0U658509 Hours: 3680 Location: KAMLOOPS, BC

$277,000

2013 JOHN DEERE 850J Unit #: RM241498 Hours: 6041 Location: SASKATOON, SK

$199,900

FLEXIBLE OPTIONS FINANCING CUSTOMIZED, FIND OUT MORE 1-855-711-4545

2017 BOBCAT A770

Unit #: 0U011521 Hours: 460 Location: EDMONTON, AB

$79,900

2015 JOHN DEERE 953M

Unit #: 1U271506 Hours: 8900 Location: PRINCE GEORGE, BC

$275,000

2014 JOHN DEERE 2154D Unit #: 0U210824 Hours: 11478 Location: CASTLEGAR, BC

$175,000

2018 JOHN DEERE 310SL

Unit #: 0U325678 Hours: 1096 Location: GRANDE PRAIRIE, AB

$175,000

Page 31

2014 JOHN DEERE 772GP Unit #: 0U658278 Hours: 8117 Location: SASKATOON, SK

$170,000

2015 JOHN DEERE 323E Unit #: 0U283674 Hours: 3239 Location: REGINA, SK

$35,000

2017 VOLVO 160E

Unit #: 0U310012 Hours: 1300 Location: VERNON, BC

$159,999

2006 DITCH WITCH FX30 Unit #: 1U000119 Hours: 868 Location: EDMONTON, AB

$53,000

Page 32

Supply Post Â· supplypost.com

March 2020

FEATURED USED EQUIPMENT $33,900

$50,000

2E411 - Penticton 2014 Case SV250 4,691 hrs

21E10021 - Langley

15E3106 - Langley 2010 Terex TA400 3,102 hrs

1E947- Prince George

2010 Case 580SM 3

2017 Link-Belt 210X2PHN

8,448 hrs

5,530 hrs

$53,500

$61,500

$238,000

$329,900

$47,750

$145,000

15E3262 - Langley

21E10017 - Langley

2E380 - Penticton

21E10022 - Langley

2013 Case 580SN 4

2011 Case 580SN 4 8,835 hrs

2013 Tigercat 635D

2008 Case

8,241 hrs

15,645 hrs

9,765 hrs

$179,500

$143,500

8E694 - Cranbrook 2014 John Deere 959K 11,153 hrs

2014 Case 821F

2017 John Deere

7,706 hrs

2,641 hrs

$350,000

$86,500

15E3227 - Langley

15C3265 - Langley

2013 Case 580SN 4

2018 Link-Belt 350X4EX

8,565 hrs

478 hrs

Brandon 204-728-6681 Estevan 306-637-2121

Fort St. John 250-785-6105

Regina 306-569-9021

Burnaby 604-291-6431 Kamloops 250-374-4406

Saskatoon 306-931-1911

Campbell River 250-287-8878 Kelowna 250-769-2933

Swift Current 306-778-2390

15E3271 - Langley 2012 Case 850L 2,536 hrs

8E707 - Cranbrook

1E892 - Prince George

$59,000

$92,000

$407,500

21E10026 - Penticton 2012 Case 580SN 4 4,016 hrs

Castlegar 250-365-2807 Langley 604-607-0300

Terrace 250-635-2292

$335,000

Cranbrook 250-426-6205 Nanaimo 250-758-5288

Vernon 250-545-4424

INLAND-GROUP.COM

15E3254 - Langley

2016 Link-Belt 4040TLN 6,436 hrs

Dawson Creek (Parts) 250-784-0934 Penticton 250-492-3939

Whitehorse 867-668-2127

Delta 604-952-1280

Prince George 250-562-8171

Williams Lake 250-392-7101

Quesnel 250-992-7256

Winnipeg 204-694-3874

CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER

SECTION 2

WWW.SUPPLYPOST.COM MARCH 2020 · PAGE 33

Call Toll Free in Western Canada:

1-888-852-9021

4 SOLID BRANDS SUPPORTED BY 1 SOLID DEALER Powerscreen 320SR Trakpactor

Washing Systems

Terex Washing M1700 3 Deck Rinser

Terex Evoquip Cobra 230 Impactor w/Colt 1000 Screener

Komptech Multistar L3

Washing Systems

www.ForemanEquipment.com

Page 34

Supply Post · supplypost.com

604-940-8210 or 1-800-205-6633

TEREX FINLAY C-1540P CONE CRUSHER

• With Pre-Screen • Available now on Vancouver Island

TEREX FINLAY J1170 JAW CRUSHER

• 2019 Model

March 2020

hello@skreenquip.com

TEREX FINLAY TEREX i-120rs Impact FINLAY I-120 IMPACT CRUSHER CRUSHER

• Detachable recirculating 12’ x 5’ two deck screen

NORDMANN K-750 HOOK LIFT JAW CRUSHER

•Super Compact Hooklift Jaw Crusher

ALL EQUIPMENT AVAILABLE FOR SALE OR RENT TEREX FINLAY 684 screener

• 14’ x 5’ 7” Triple Deck, Cat C4.4

TEREX FINLAY J-960 COMPACT JAW CRUSHER

• 36” X 24“ Jaw / CAT C7.1

7801 Vantage Way, Delta BC

TEREX FINLAY 863 SCREENER

• 9’ X 4’ Double Deck, 40” wide main belt

TEREX FINLAY J-1170

• Used 2014 model For Sale • 28” X 44” Jaw/ Cat C9/ Tier 3

skreenquip.com

March 2020

Supply Post · Our Readers Are Your Buyers

WHEELER EQUIPMENT LTD.

Specializing in building & servicing yarders!

• WASHINGTON YARDERS & HEAVY EQUIPMENT REPAIR • REMANUFACTURING & CUSTOM PARTS FABRICATION • RECYCLING EQUIPMENT & MATERIAL HANDLERS • MANUFACTURING SKYLINE EXCAVATORS AND DRAGLINE BUCKETS FOR THE AGGREGATE INDUSTRY

Page 35 Washington Yarders

10 YARD AGGREGATE DRAGLINE

10 YARD AGGREGATE DRAGLINE • Produces approx. 500 tonnes/per hour • Skyline Drum

holds 1400' of 1-3/8" dragline • Haulback holds 2800' of 1" line • Skyline & Dragline have 260,000 lbs of pull in low gear • Haulback moves at approx. 1800' per minute • We have also produced 5 yard and 8 yard units • Please call us to discuss your project.

CALL FOR MORE INFO 604-882-9995 8790 River Rd, Delta, B.C. V4G 1B5 / (604) 882-9995 / info@wheelerequipment.com / www.wheelerequipment.com /

Page 36

Supply Post · supplypost.com

Tel: (306) 244-0423 Toll Free: 1 (800) 667-2025

818 43rd St E Saskatoon, SK

CANADA'S ASPHALT PLANT MANUFACTURER

OFFICIAL DISTRIBUTORS OF POWERSCREEN® IN SASKATCHEWAN AND MANITOBA

NEW RAPTOR XL200 IOC CONE CRUSHER Tandem axle chassis, 200HP crusher motor 480V, 36" feed and discharge conveyors, brake and light package, oil cooler, prewired switch gear panel for all motors and

$580,000.00

cone start...............................

NEW WRT 5 X 14 DOUBLE DECK PORTABLE SCREEN PLANT Single axle carrier, brakes, lights, dolly legs, 48" front fines belt discharge and chutes, pre-wired starter panel installed 480V. Call for more info.

WRT “BG” SERIES PORTABLE COUNTER -FLOW ASPHALT DRUM MIXERS Truss-reinforced chassis for maximum stability in both transport and operation, center-pivot

case-hardened

trunnions

over-sized forged alloy tires,

and

four “run-on”

hydraulic stabilizers. Call for more info.

WRT 4X8 SINGLE DECK SCREEN Complete with motor and sub base 15 degree WRT 4X12 DOUBLE DECK SCREEN Complete with motor and sub base 15 degree WRT 12 YARD EXCAVATOR BOX WRT 10'X14' STATIONARY GRIZZLY 4"X4"X3/8" HSS, 3", 7", 11" spacing standard

IN STOCK IN STOCK IN STOCK IN STOCK

Check out our website www.wrtequipment.com for more asphalt, conveyors, feeders and compaction equipment

March 2020

CN Named One Of Montreal’s Top Employers CN is pleased to be recognized as one of Montreal’s Top Employers for 2020 by Canada’s Top 100 Employers for the fourth consecutive year. “We are delighted to have been selected again for this honour,” said Dorothea Klein, Senior Vice-President and Chief Human Resources Officer, who joined CN in December 2019. “Having recently moved to Montreal, I’m particularly proud of the recognition of CN’s headquarters city as well as CN’s dedication to its employees and the communities in which they work and live.” The Montreal Metropolitan region is home to a large portion of the Company’s workforce. More than 3,000 of its employees are based in the area, either at its downtown headquarters or in one of its many operating terminals in the region. Montreal’s Top Employers honours local employers who provide excellent work conditions and benefits to their employees.

This year’s winners were announced on January 30, 2020 in a commemorative magazine published in the Montreal Gazette. CN’s online profile details some of the reasons it was chosen as a winner, such as free access to an onsite fitness facility at its headquarters office, an employee share purchase

plan, the employee and pensioner-run Community Fund, which has raised more than $17.1 million over 10 years for Canadian charities, as well as the CN Railroaders in the Community program, which provides grants to the nonprofit organizations its employees volunteer for. CN was also recently honoured as one of Canada’s Top 100 Employers for 2020. Now in its 20th year, the Canada’s Top 100 Employers competition evaluates employers across the country that offer exceptional workplaces for Continued on page 38

Large to small, we do it all! Working harder, so you don’t have to. Stocking new, used, and rebuilt parts and components for most makes and models. Large to small we do it all. FOR SALE:

Rebuilt 3304/3306 engine parts/blocks, Cat loader axles and final drives. Pkg Of Good Used/Rebuilt Cat Haul Truck Components, Call For Details CONSIGNMENT SALE:

• 2016 KW T800 Winch Truck • 2018 Aspen Booster • Cat 966C Wheel Loader • 6-71 Detroit, Good Runner • Cat C-13 • 3306 Take-Out Engine JUST IN FOR WRECKING: • Deere 690 & CAT 518 Skidder

Kamloops, BC., CALL GRAHAM: 250-851-1100 | 250-573-4181 (Office/Fax) | bgparts@telus.net www.bgparts.ca

SALES, SERVICE, RENTALS, PARTS | MORMAK.COM

QUALITY AGGREGATE EQUIPMENT FOR SALE OR RENT RENT OR SALE

USED FINLAY C-1540P TRACK CONE

USED FINLAY J-1160 TRACK JAW

MORMAK 1645-II CLOSED CIRCUIT CONE PLANT

USED FINLAY J-1170 TRACK JAW

TESAB I700 TRACK JAW, CAT POWER 28X44

1645C CEDARAPIDS - USED

USED 1145 CONE PLANT

USED 600KW CUMMINS POWER VAN

USED MVP450 CONE PLANT

USED 1145 CONE PLANT

Terex Cedarapids: Cedarapids 1645II Closed Circuit Plant ......................................... NEW (4) Cedarapids MVP380X Cones ...................................... NEW & USED (2) Cedarapids MVP450 Cone Plant ............................................. USED

Mormak HD4248 Belt Feeder ................................................ USED Ecotec 520-3 Trommel ............................................................ POR Ecotec 1600 Trommel .............................................................. POR C400 & C300 Bushing Cone ..................................................... POR

(AB / YT / NWT)

(BC) (AB / YT / NWT)

VERNON, BC 8140 Becketts Rd.

CHILLIWACK, BC 7912 Atchelitz Rd.

CALGARY, AB 8815 44th St. SE

EDMONTON, AB 27321 Acheson Rd.

1-844-MORMAK1

March 2020

Supply Post · Our Readers Are Your Buyers

Page 37

QUALITY NEW & USED AGGREGATE PROCESSING EQUIPMENT FOR SALE OR RENT NEW 2019 GOMACO NEXT GENERATION COMMANDER III 3D STRINGLESS TECH. READY

TIER 4 CAT POWER 42” TRIMMER

Your Gomaco Dealer For Western Canada.

2017 GOMACO SERIES 4000 SPANIT WORK BRIDGE. SelfPowered. 104’ of deck length. Low hours, very good work ready condition..................................... CALL FOR DETAILS.

IN STOCK & AVAILABLE AT A SPECIAL PRICE

2017 GOMACO SERIES 4000 SPANIT WORK BRIDGES. NonPowered. 104’ of deck length. Low hours, very good work ready condition..................................... CALL FOR DETAILS.

2015 MORMAK BUILT MVP450 PLANT Cone was rebuilt with recent inspection showing ,excellent condition. Off plant infeed conveyor with magnet included, Twin 200 HP cone drive motors. ............................................$385,000 OBO.

KPI 2500 VSI. 2500 VSI Crusher, On Chassis, Fully Self Contained, Discharge Conveyor, completely re-conditioned. ...................................FOR SALE OR RENT!

KPI MODEL FT2650 TRACK JAWS 2 to choose from. Cat Tier 3 engines, 2,000 hr machines. ................................... ....................................................................FOR SALE OR RENT!

CONVEYORS IN STOCK! 60’, 80’, 100’, 125’, 150 ................. ................................CALL FOR FULL DETAILS AND PRICES.

2018 JCI FT200DF TRACK CONE Very low hours, 45” cone – 200 HP, Powered by Cummins QSL9 T4 350 HP... SALE OR RENT

SANDVIK QE441 TRACK SCALP SCREENING PLANT, S/N: 10057, Cat Tier 3 engine, 840 hrs approx. .......................................................................... FOR SALE OR RENT

SALES CONTACTS:

William Thompson Hugh Porter 780-474-8082 604-657-7167 Willie@chieftainequipment.com hugh@lonetrack.ca

Equipment (2017) Ltd.

Page 38

Supply Post · supplypost.com

Continued from page 36

their employees. CN is a true backbone of the economy whose team of railroaders transports more than C$250 billion worth of goods annually for a wide range of business sectors,

ranging from resource products to manufactured products to consumer goods, across a rail network of approximately 20,000 routemiles spanning Canada and mid-America. CN – Canadian National Railway Com-

pany, along with its operating railway subsidiaries – serves the cities and ports of Vancouver and Prince Rupert, B.C., Montreal, Halifax, New Orleans, and Mobile, Ala., and the metropolitan areas of Toronto, Edmonton,

Winnipeg, Calgary, Chicago, Memphis, Detroit, Duluth, Minn./Superior, Wis., and Jackson, Miss., with connections to all points in North America. b

Metso VP Named Top 100 Corporate Counsel Award Winner

Source: CN Railway

Aleksanteri Lebedeff, Senior Vice President, General Counsel of Metso Corporation, was granted recognition as the Award Winner of OnCon Icon 2020 TOP 100 Corporate Counsel Awards in Orlando, United States on January 17th, 2020. The highly valued annual OnCon Icon Awards recognize the top corporate counsels globally. Winners are determined by peer to peer votes. This year’s OnCon Icon Award Winners were determined from over 4,500 votes in total. “It is an honor to be selected as an award winner, as the selection is based on peer recognition. I am sincerely delighted. Being recognized like this would not have been possible without the outstanding work of Metso’s legal and other professionals throughout the company with whom I am privileged to work,” Lebedeff says. In recent years, Metso’s legal has executed various

RLC AGGREGATE EQUIPMENT FOR SALE · RENT · OR RENT TO OWN Call 1-833-706-9458 | Email: info@rlcagg.ca

FINANCING AVAILABLE OAC

36x80 & 36x100 Conveyors (Option) Kubota Diesel

New & Used Triple Pack 36x70 Kolberg

New & Used Feeders (2) Elrus 36x42 Feeders Available for Rent

New & Used Power Vans Available Call for more info

Bell Sampler (Self Standing) C/w remote control – pre-wired and ready to go!

7 x 20 Cedarapids Screen Plant

POWER VANS/GENERATORS/SCREENS: New Build, 27-Stations, 400 HP Soft-Start, 6x10 Tower, 1,266 Gal. Enviro Tank, No Gen Set...........................POR Un-used 2015 100kW Van c/w U-Haul Trailer & Used 2015 Cummins 150kW Power Van Electrical ................POR Used 2014 Rebuilt Cummins 600kW 2017 Cummins 600kW 3,640 Hrs. & 2013 CAT C-18 600kW, 7,555Hrs .....POR 2010 Fab-Tec 5x16 Contractor Plant c/w 150kW Gen Set w/ Electrical (3) Extra Plugs .....................................POR New P7203 Cedarapids Screen Plant & Superior 4x8 Dewatering Screen (used 1 month) .............................POR Used 2004 Build, 41 stations, 6x10 tower, u/s fuel tank, Genset optional at customer request .....................POR FEEDERS: Elrus 3642 Feeder, Fab-Tec 4242, Hikon 4242, c/w Hyd. Grizzly .........................................................................POR

March 2020

CONVEYORS/SPLITTER CHUTES/BELT SAMPLER/PARTS: New JP Radial Stackers (Hyd. or Elect., 36x40, 36x60, 36x80, 36x100, 42x40, 42x60 .....................................POR New 2018 KPI/JCI 33-36150 Super Stacker & Used 2018 KPI/JCI 36x150 Super Stacker .....................................POR New JP Triple Stack Conveyors, 36x60, 36x70, 42x60, 42x70 ............................................................................POR Used Radial & Transfer Conveyors, 30x50, 30x60, 36x50, 36x60, 36x75 & Kolberg 36x70 Roll Pack .............POR New JP 14 Yard Skid Feeder (Hydraulic Grizzly Option) ......................................................................................POR 2007 30 cu/yd. Surge Bin & 2005 20 cu/yd. Surge Bin ............Available for Rent ...........................................POR Un-used 2017 Hikon 3033-12 Feeder with Grizzly ...............................................................................................POR

View Complete Inventory at www.rlcaggregateequipment.ca

complex transactions and some other rather demanding legal cases with effective cross-functional teamwork and professionalism to support the company’s strategy and business objectives. Lebedeff joined Metso in 1987. He has acted as Metso’s General Counsel and Secretary to the Board since 2006. Metso is a world-leading industrial company offering equipment and services for the sustainable processing and flow of natural resources in the mining, aggregates, recycling and process industries. With our unique knowledge and innovative solutions, we help our customers improve their operational efficiency, reduce risks and increase profitability. Metso is listed on the Nasdaq Helsinki in Finland and had sales of about EUR 3.2 billion in 2018. Metso employs over 14,000 people in more than 50 countries. b Source: Metso

Call: 403.503.7877 Geoff@MachinerySupply.ca

EQUIPMENT FOR SALE 2005 CEDARAPIDS MVP380 CONE CRUSHER In/out chassis, hydraulic levelling package, 300hp 460v motor, 36” in-feed, 42” discharge. Rebuilt in our shop: seats resurfaced, wear liner replaced, new bearings, much more. Call Geoff for details.

TELSMITH

HYDRA-JAW SERIES JAW CRUSHER ®

Advanced Hydra-Jaw Technology

2006 53’ POWERVAN Fully refurbished tower and electrical. Still available to customize if requested ASAP. Call for more nfo.

Hydraulic toggle assembly reduces the overall cost of ownership. - Fast, safe hydraulic chamber clearing - Tramp iron overload relief - Auto reset Telsmith Dealer - The Groundworx Co. Grant Kergen (780) 887-7123 | grant@groundw.com

www.telsmith.com

2018 TRIO PE2436 PORTABLE PRIMARY PLANT, electrical panel, 4 hydraulic legs, 42x20 Terex VGF, hydraulic wedge adjust. 125HP 400 Hours…………POR

100 East Lake Drive, NE Airdrie, AB T4A 2K1

www.MachinerySupply.ca

March 2020

Supply Post · Our Readers Are Your Buyers

Saskatchewan Modernizes Pipeline Regulations The Government of Saskatchewan is modernizing and strengthening its regulatory oversight of oil and gas pipeline infrastructure in the province, with the proclamation of the Pipelines Amendment Act, 2019 (the Act). “This is the culmination of several years work and delivers on our promise, made in 2017, to ensure that Saskatchewan citizens and our environment are protected to the highest standard,” Energy and Resources Minister Bronwyn Eyre said. “The introduction of substantial enhancements to our pipeline licensing system will also provide more efficiency and regulatory certainty for our oil and gas sector.” In recent years, the province has enhanced regulatory systems to monitor and review pipeline construction and operations, with more stringent inspection, investigation, penalty and audit powers. The new Act and regu-

pipeline regulatory framework, the Government of Saskatchewan worked to ensure both regulatory efficiency and predictability for operators,” Canadian Association of Petroleum Producers (CAPP) VicePresident of Western Canada Operations, Brad Herald said. “The new pipeline module, with its Online licensing registry, highlights the province’s commitment to monitoring and upholding the highest standards of safety for the public and the environment; standards that are also continuing priorities for industry.” The new system will also streamline the review of applications and reduce the time required for routine approvals. In addition, the introduction of administrative penalties will complete the overall compliance framework tied to pipeline regulation. The Pipelines Administration and Licensing Regulations are now in effect, along with Directive PNG034: Saskatchewan Pipelines Code, which clarifies and enhances requirements set out in previous regulations. b

lations will expand regulatory oversight to include retroactive licensing of approximately 80,000 flowlines across the province over the next four years and more stringent scrutiny of applications at higher-risk locations, such as waterways. With these changes, the Ministry of Energy and Resources has fully addressed all outstanding issues raised by the Provincial Auditor regarding the integrity and safety of pipelines in Saskatchewan. This is the first system of its kind in Canada to adopt an entirely electronic registry of pipeline licensing and administration. The Act establishes a new module in the Integrated Resource Information System (IRIS) for an Online license registry, similar to the Saskatchewan Land Titles Registry, which will issue and administer licenses for the oil, gas and mining sectors. “In developing the Source: Saskatchewan.ca

Page 39

WE SELL WHAT WE KNOW & WE KNOW WHAT WE SELL©

SALES • RENTALS • PARTS OFFICE: 780-463-7077 | CELL: 780-887-7123 email: grant@groundw.com • EDMONTON • CHILLIWACK (604) 991-9779 • SASKATOON • WE SHIP ACROSS CANADA 616 DOUBLE DECK CAT 4.4 ENGINE - 3 PRODUCT CONVEYORS BALL DECK - REMOTE TIPPING GRIZZLY & FEED SPEED.

NORTH N AMERICA BUILT!

FREE DEMO AVAILABLE — CALL TODAY!

NEW 616 DIESEL SCREENER

RENTAL

JCI DRIVE OVER TRUCK UNLOADER

USED TELSMITH SBS 44 CONE

CAT DIESEL GENERATOR SWITCH GEAR TO RUN SUPER STACKER OR ANY CONVEYORS *** UNLOADS A TRUCK IN UNDER A MINUTE ***

2012 SBS44 – 300 HP CONE – 9900 HRS INC. LUBE TK., COOLER, & HYD . PACKAGE INC. COMPLETE CONE INSPECTION

RENTAL

DOPPSTADT 3060K SHREDDER

30 X 42 JAW PLANT

USED 2015 DOPPSTADT 3060K - 1700 HRS - BIO-POWER - 42 SHAFT TEETH, 495 HP MERCEDES TIER III, MAGNET, HAND HELD REMOTE OPERATION *** 6 MONTH OR 500 HR WARRANTY ***

NEW 2018 MINYU 30 X 42 JAW – VGF WITH VARI-DRIVE – ELECTRIC PANEL INC. RUN-ON-LEGS – BOOSTER MOUNTS

USED 2014 POWER VAN

NEW 36 X 100

53’ TANDEM AIR RIDE, DOUBLE WALLED DIESEL TK SWITCH GEAR, INC. 300HP & 150 HP. SOFT STARTS 10’ CAB/TINTED GLASS/A/C/HEAT/ CONSOLE, CUMMINS 500 KW GENERATOR

LATTICE FRAME - TOP FOLD - WHEEL DRIVE, HYDRAULIC R&L - POWER CORDS

RENTAL

Increase capacity and wear life in demanding screening applications With Metso Trellex™ PolyClean. metso.com

Fredericton, NB 506-458-5613

Truro, NS 902-895-4913

lswwearparts.com An authorized Metso distributor

2238 SCALP JAW

5 X 17’ SKID MOUNTED SCREENER

TELSMITH 2238 HYDRA JAW & 616 MD SCALP DECK. HYDRAULIC JAW ADJUST – SWITCH GAR WIRED TO MOTORS *** SALE OR RENT ***

5 X 17 MOUNTED ON SKID PLATFORM – SWITCH GEAR COMES WITH 3 AUX CONVEYORS ON STANDS *** PRICED TO SELL - $69,900 ***

FINANCING AVAILABLE O.A.C WWW.GROUNDWORX.CA

Page 40

Supply Post Â· supplypost.com

March 2020

Used Edge TRM622 Trommel Screen, Hopper with Extensions and Tipping Grid, 48" Feed Belt, 60" Collection Conveyor, 42" Oversize Conveyor with Impact Bars

Used 2007 Metso Lokotrack LT200 Mobile Cone Crushing Plant Nordberg HP200 Cone Crusher 210mm Feed opening Cat C13 415hp Engine

Used 4x10' 2-Deck Screen, Huck Bolted Sides, Inlet Chute, Replaceable Integral Discharge Chute Flushed water system, New water lines, New bull values, New crown rubber

2018 Sandvik QJ341 Track Mounted Jaw 3048 Jaw, 9 cuyd hopper, 39" Discharge Conv, 26" Side Discharge Conv, CAT C9.3 Acert diesel motor power pack

2018 ELRUS 7 X 20 - 3 Deck Screen Plant with 48" Overhead Feed Conveyor, 72" Underscreen Conveyor, 2 Cross Conveyors, Hydraulic Leveling on tandem Axle Chassis

2018 ELRUS 6 X 20 - 3 Deck Screen Plant with 42" Overhead Conveyor, 60" Underscreen Conveyor, 3 Cross Conveyors, Hydraulic Leveling on Tandem Chassis

2016 ELRUS Feeder Screen with MS612 Self-relieving Hopper, Side Dump Grizzly, 36" Feed Belt, 42" Overhead Feed Con, 42" Discharge Con, 3 Cross Conveyors, and Cables

2015 ELRUS Cone Chassis c/w Sandvik 300 H.P. CH540 Cone Crusher, ASRi Automated Cone Control, 36" Feed Conveyor, 36" Return Conveyor, Tramp Metal Protection

Used Cedarapids 3042 Jaw Plant with Discharge Conveyor on Triaxle Chassis

Massive Used inventory Sale !!!! 2008 ELRUS 36x42" Portable Belt Feeder w/ Hydraulic Side Dump Grizzly, 15 cu. yd. Selfrelieving Hopper, AR Plate Lining, 42" Delivery Conv, Tandem Axle Walking-Beam Suspension.

1-877-979-7741

Used Cone Chassis with Allis 4000 Cone New ASRi 2.0, 36" Overhead Feed Conveyor, 42" Return Conveyor, Tramp Metal Protection on Triaxle Chassis.

ELRUS Cone Chassis c/w Sandvik 450 HP Computer Controlled Cone Crusher, 36" Feed Conv, 42" Return Conv, Hydraulic Leveling, Panel on Chassis

www ww w.elrus.com

CLASSIFIEDS

TO PLACE AN AD, CALL 1-800-663-4802 OR VISIT WWW.SUPPLYPOST.COM /ADVERTISE/CLASSIFIEDS ATTACHMENTS

CABS

CRANES

2002 potion HD40A selfHyd. thumb for 120/135 2010 Komatsu HM300- erect crane w/MMG 55 size excavator c/spins, 2 Cab. New Paint Job. Magnum genset yard dollies, test weights, crane mounting bracket Unused. $8,500. Sommerfeld, High specs: height 75’6” reach Bluff, MB Sidney, BC. $3,750. PHONE: (204) 243-2453 114’10” max lift@ 36’9” jfwexcavatingltd@shaw.ca 8820lbs max lift at 114’10” COMPACTORS PHONE: (250) 480-9609 2205 lbs. $110,000. Courtenay Cranes DAVE: (250) 339-0400

MARCH 2020 · PAGE 41

DOZERS

Trojan 204A, 2 cu/yd bucket, new main pump, Detroit 6V71, recent full service. $10,000. Wetaskiwin AB PHONE: (780) 362-0874

ENGINES

2005 Case CX-160 lots of recent work, 24” & 60” CWS HD Q/C buckets all manuals ; cat walks; cat/ JD switch Cummins 4BT engine; working heat, a/c in the cab, u/c fair sprockets newer 10400 hr serviced ready to go! PHONE: (250) 320-2880

1989 Cat 225B-LC, Reman 3208 135HP, Exc. Cond. No leaks, great U/C, 25 ton $21,000. Wetaskiwin AB PHONE: (780) 362-0874

Large inventory of used and rebuilt Detroit Diesel, Cat, Cummins, Perkins, Deutz and Volvo engines. P.G. Truck & Equipment PHONE: 1-800-946-9400 OR (250) 561-1234

2012 JD 225D Hi-Rail excavator w/RCE Railvator, hyd high-rail package. Standard non-insulated 2005 John Deere 200 C/W Equipment For Sale Online 2 0 0 5 I n g e r s o l l - R a n d 2011 Grove 890 E, Parting axle assemblies, 24 to 12 bucket and thumb and – We have thousands of SD-77DX 66” Compaction out - Booms, Winches, Out equipment & trucks for sale volt convertor, front/rear cleanup bucket. 7200 hrs. Roller, Cummins B4.5T Riggers, Lift Cylinders, at SupplyPost.com! Log on PHONE: OR TEXT aux lights, JRB bucket couTires, Block and Ball Call Engine, Tier 2. $35,000. today... JOHN: (604) 845-6242 C o u n t e r W e i g h t c / w j o h n @ s i n g l e s o u r c e for Details. High Bluff MB pler, thumb, RCE full offwww.supplypost.com john@sofelco.ca drawbar, for larger crawl- rentals.com Can’t find what you are track hydraulic package. PHONE: (604) 465-1377 PHONE: (204) 243-2453 ers, FD30 Fiat/Komatsu looking for? Thousands of PHONE: (705) 566-1294 EXCAVATORS D155 or similar. $5,500. more machines and equipCONCRETE EQ. CRUSHERS ment for sale on: Sommerfeld. High Bluff, www.supplypost.com MB. john@sofelco.ca PHONE: (204) 243-2453

N e a r n ew Fa s t - Way “Super-Sacker” & Auger, 10,000 lbs. capacity c/w load cells & controls, Auger with 460V motor, $25,000 OBO. HUGH: (604) 657-7167

CONVEYORS Cr ushers, Pulver izers, New & used conveyors, from 20’ to 120’, radial or Shears! Own or Rent. transfer conveyors, quick vanedequipment.com delivery. PHONE: (604) 888-9020 TYALTA INDUSTRIES INC. PHONE: (877) 255-9293 PHONE: 1-800-960-9939

AMIX GROUP SURPLUS Jim Murphy • 1-844-505-4105

• 1 – Shipping container ramp��$3,500 • 14- 40’ shipping Containers�� $2,600 ea. • 4- 20’ shipping containers ��$2,900 ea� • NOS Cat oil & fuel filters, IR-2299, IR-0711, IR-

0713, IR-0714 IR- 0721, IR-0740, IR-0756 �� $5 to $15 ea.

To see all our surplus inventory, visit SupplyPost.com

Cedar Rapids 45” Classic portable cone plant, 125 HP cone drive, New standard liners, In & Out belts in good shape, Work ready in good operating condition $135,000. HUGH: (604) 657-7167 For all your crushing equipment requirements. Sales, service and parts MORMAK EQUIPMENT PHONE: (250) 542-7350 VERNON, B.C.

2018 John Deere 35G, long stick, LIKE NEW in perfect condition, thumb, blade, a/c, heat, two buckets, Full Machine John Deere Warranty until 2023 or 2500 hrs. (Warranty transfer fees may apply) Purchased new from Brandt Tractor in Surrey. $52,900. Ask me about shipping credits on this machine. kevin@smartcastequip ment.com PHONE: (604) 670-1471

2018 John Deere 60G, 879 hours, blade, hyd. thumb, enclosed cab w/ heat and A/C, 2 buckets 2013 JD 225D Hi-Rail (44” cleanup and choice of excavator w/RCE Railvator, hyd high-rail package. 12”/18”/24” dig), 2500 hour Standard non-insulated full machine warranty until axle assemblies, 24 to 12 2023. $69,900. Please ask volt convertor, front/rear me about shipping credits aux lights, JRB bucket cou- on this machine. pler, thumb, RCE full off- kevin@smartcastequip ment.com track hydraulic package. PHONE: (705) 566-1294 PHONE: (604) 670-1471

ZF TRANSMISSIONS & DIFFERENTIALS

Sexsmith Used Farm Parts Ltd.

- REBUILDS & REPAIRS -

DISMANTLING: EXCAVATORS: Komatsu PC228USLC LOADERS: Case 621, JD 644C, JD 544B, IT14B Cat, W14, Case W20, Case W20C, MF 33D, Case W14B, JD 544 CRAWLERS: Komatsu D53A, Case 1150B, JD 450C, Cat D7, Cat D82U FORKLIFTS: IHC 4500, MF 6500 • GRADERS: Champion 720A SKIDSTEERS: Cat 297, Gehl 4625, Melroe Bobcat 943, 863, 853, 843, 610, Case 1845, 420 NH BACKHOES: JD 610T, JD 310D, Case 580B, Case 780, Ford 575E TRENCHERS: Case 860 PACKERS: Bomag BW213 PDH-2 A LARGE SELECTION OF TESTED DIESEL ENGINES CUMMINS, CAT, PERKINS, JD & CASE

Moxy, Terex, Volvo, John Deere, Case - specializing in off-highway applications - quality and cost-effective work - on-site testing and troubleshooting - available 7 days a week

Also offering on-site repairs and servicing of all makes of construction and agriculture equipment.

Dolphin Mechanical Services Ltd. Langley, BC - Call Eric 604-314-8032 dolphinmechanicalservices@telus.net

Sexsmith, AB | www.usedfarmparts.com E-mail: farmpart@telusplanet.net

1-800-340-1192

Buying Equipment For Dismantling

Page 42

Supply Post · supplypost.com

March 2020

BANNING EQUIPMENT LTD 8901 Penn Road, Prince George, BC Phone: 250-564-7226 · Fax: 250-564-7233 Email: scott@banningequipment.com EQUIPMENT FOR SALE

2013 - K008-3 Mini Excavator Kubota ..........................................$20,000 2012 - 966K - Cat c/w WBM Grapple..........................................$165,000 2012 - ZX350LC-5N Excavator Hitachi........................................$115,000 2008 - 320DLLR Excavator Cat .......................................................$70,000 2005 - TK741 Feller Buncher - HF221 22” head...........................$65,000 2001 - 730A Feller Buncher Prentice............................................$85,000 2001 - D7R XR Crawler Cat Double a/tilt, ripper .......................$170,000 1998 - IT28G Wheel Loader Cat.....................................................$41,500 1993 - IT24F Wheel Loader Cat .....................................................$39,500

DOZER ATTACHMENTS

Blade - D8N-R Double angle tilt & C-Frame ...............................$25,000 Blade - D7R Semi-U w/tilt 142” .....................................................$18,000 Brush Rake - D6 - Destec ................................................................$6,500 Counterweight - D6T Drawbar Parts .............................................$2,500 Ripper - D7R - Cat Multi-shank .....................................................$20,000 Ripper - D8N-R-T Ripco Multi-shank- No Controls ...................$25,000 Winch - D5H - Cat ...........................................................................$12,000 Winch - D7H/D7R Hydraulic & Controls ......................................$12,500 Winch - D8N/D8R Hydraulic & Controls ......................................$12,500

WHEEL LOADER ATTACHMENTS

Blade Snow 930K/938K EFI/Hyd/Ang/Fusion, 12ft ......................$15,000 Blade Snow 930K/938K WBM 12ft. Fusion Hyd/Ang .................$16,000 Blade Snow - 966C Pin-On Hydraulic Angle 12’ ...........................$7,000 Blade Snow - fits on 980G Log Grapple 14’ ...................................$1,500 Bucket - IT28G/930G - Cat Q/A 100in..............................................$3,000 Bucket - 938H/938K Cat Fusion Q/A -106” .....................................$7,000 Bucket - 966D/E/F - Cat 126” ...........................................................$6,500 Bucket - 966G - WBM 120” 7-1/2” yard. T/A.................................$8,000 Coupler - 980H - Imac Q/C hydraulic..............................................$5,900 Forks - IT28G - IT Q/A 72” ................................................................$4,500 Forks - 930K,938K Cat Fusion - Q/C 54”..........................................$5,500 Forks - 938G - WBM Q/A 46” ...........................................................$4,000 Grapple - 930H - IT Q/A EFI Almost New .......................................$4,000 Grapple - 966G Cat Log grapple WBM ..........................................$7,500 Jib - 930G/H, Cat Fusion Lugging ....................................................$4,500 Jib - 938K - Fusion Q/A .....................................................................$4,500 Secondary Steering Kits 950H/962H/966H/972H ..........................$3,500 Tire - IT24F/IT14F - 17.5 x R25 40% Michelin (4) ...........................$2,750

MOTOR GRADER ATTACHMENTS

Blade Snow 140H/140M Hyd. Lift & Angle WBM ......................$15,000 Blade Snow 140H/140M-Hyd. Lift No Angle WBM ....................$13,500 Blade Snow 140M,160M,14M M/Angle, New Cat 11’ ...............$11,000 Blade Snow 140M,160M Frt/Nose Mnt No Angle 9’ ....................$6,000 Lift Grp. Front - 140G/H/M - Cat.......................................................$6,000 Lift Grp. Front - 14H/14M - WBM ....................................................$8,500 Snow Wing -140M/160M - WBM ripper mnt. *New* ...............$12,500 Snow Wing - 140M/160M - WBM Low Pro .................................$12,500 Snow Wing - 140H/160H - WBM Lo-Pro........................................$4,000 Ripper - 14H - Ripco MS...................................................................$5,250 Ripper - 14H - Cat 7 Shank ...............................................................$6,500 Wobbly Wheel - Cat 14H/J/D accum s/shift 12 whl...................$16,000 Wobbly Wheel - Cat 160M/J/D Graders ......................................$14,000

SKIDSTEER ATTACHMENTS

Auger 30C SkidSteer High Torque Unit Drive ...............................$2,500 Blade - 246C - AMI 108” snow *New*..........................................$4,610 Bucket HD LowPro Skidsteer 72” edge..*New* ..........................$2,025 Bucket RD LowPro Skidsteer 78” tooth..*New* ..........................$1,650 Fork - SS - AMI 48” 4200 LB HD Q/A…...*New* ..........................$1,065 Jib - Skidsteer 2000 lb Cat Lugging ................................................$1,850 Cement Mixer Edge Skidsteer Q/A #24962...................................$3,500

BACKHOE & MINI EXCAVATOR INVENTORY

Bucket - 35 Series - Cat 24” EFI Q/A ..............................................$1,850 Bucket - 301 Cat 10 Series - EFI Q/C 12” .......................................$1,650 Bucket - 303 Cat 30 Series - EFI Q/C 18” .......................................$1,650 Bucket - 303.5 - EFI 18” Q/A Cat 2014.............................................$1,650 Bucket - 50 Series - 305 EFI Q/A 24” ..............................................$1,850 Bucket - Bobcat - 20” Digging Q/C....................................................$800 Bucket - 420E,F - 42” Cat Q/C Cleanup ..........................................$1,750 Bucket - 430F - 42” Cat WBM Q/A..................................................$2,250 Hammer NPK GH-07 Mini Ex Breaker Inc/chisel tool .................$4,850 Thumb - 35 - Hydraulic thumb…*New* ........................................$1,950 Excavator Attachments Brush Rake - 250 - 72” WBM Q/A…..*New*................................$7,000 Brush Rake - 300 - 72” WBM Q/A…..*New*................................$7,750 Bucket - 120 - 54” Cat WBM Q/A................................................... $5,000 Bucket - 200 - 36” Craig WBM Q/A (ZX210) ..................................$6,000 Bucket - 200 - 60” WBM Q/A ZX200LC ..........................................$6,250 Bucket - 250 - 36” Cat WBM Q/A....................................................$5,000 Bucket - 250 - 42” Cat WBM Q/A (329E) ........................................$5,000 Bucket - 250 - 60” WBM Q/A...........................................................$5,500 Bucket - 250 - 66” Q/A Finning .......................................................$4,900 Bucket - 250 - 66” EFI WBM Q/A 329E ...........................................$6,000 Bucket - 330 - 48” CWS WBM Q/A.................................................$6,500 Bucket - 330 - 72” Brandt Q/A WBM 350G..................................$7,500 Bucket - 345/450 - 54” WBM Q/A ...................................................$7,500 Bucket - 450 - 84” WBM Q/A ..........................................................$4,800 Chuck Blade - 250 - WBM 84” WBM Q/A .....................................$6,500 Chuck Blade - 300 - IMAC 84” WBM Q/A .....................................$6,500 Chuck Blade - 450 - WBM 120” WBM Q/A ...................................$6,500 Coupler - 250 Cat Hyd Q/A ..............................................................$3,500 Coupler - 250 WBM Q/A ...................................................................$3,500 Coupler - 300 Cat Hyd Q/A ..............................................................$3,500 Ripper - PC78US-6, 307D/308D, ZX75US-3, CWS .........................$1,500 Ripper - 150 - Finning Q/A Lugging .................................................$1,500 Ripper - 250 - WBM Q/A...................................................................$4,500 Thumb - 200 - Gentec MT2650 HD...*NEW*..................................$2,750 Thumb - 330 - Cat Hyd ......................................................................$6,500

2007 Hitachi ZX135US w/ new hyd. thumb, accurate 30” dig bucket, accurate 54” clean up bucket, and pattern changer. 3368 hrs.

2012 Kobelco SK210, 3184 hrs. $110,000. 2 Buckets, Hydraulic Thumb john@singlesource rentals.com PHONE: (604) 465-1377

2007 John Deere 35D w/ 18” Brandt dig bucket, 34” 2015 Link-Belt 350 X 4 Brandt clean up bucket, Brandt hyd. thumb, hyd. Long stick, 5500 hours, blade, new shor t block hyd wedge, hyd. QC cou- engine. 1471 hrs. $45,000 PHONE: (250) 468-1000 pler c/w 2 buckets, aux.

$89,900.

plmb. $215,000. Also avail.

PHONE: (250) 468-1000

56” Bkt, V Bkt & Hoe pack. POR PHONE: (604) 328-7981

Hitachi EX350-5K D e m o l i t i o n C a r r i e r, 2 2008 Cater pillar 328D, buckets & QA, Hydraulic 6093 hrs. $125,000. 2 Thum b, Fact or y Lines 2012 Hitachi ZX290 LC-5 Buckets, Zero Swing Group, Near New U/C, j o h n @ s i n g l e s o u r c e 2009 Kobelco SK850, 2050 Recent work orders, 8700 w/ 36” Accurate dig bucket, hrs., sold new at dealers in hours. $69,500 rentals.com 66” CWS clean up bucket, PHONE: (604) 465-1377 2012, equipped w/hyd cwt. HUGH:(604) 657-7167 CWS hyd. thumb, Accurate remover, pattern changer, cab guard, and aux. plumbaux tool piping, controls, ing. 7733 hrs. $139,900 35’ digging depth. a/c, PHONE: (250) 468-1000 Komatsu power 496 hp. HD 2013 Hitachi ZX290, 8703 50” 5 tooth pin on digging 2011 Hitachi ZX135US-3 hrs, c/u & dig bucket, bucket. $700,000. OBO w/ new 30” dig bucket, new 2014 Cat 303.5E CR w/ 54” clean up bucket, new hyd. thumb, extra plumbPlease Phone After 5PM Q/C, clean up bucket, hyd. hydraulic thumb, new Q/C ing. $129,000. Located in blade, and new rubber PHONE: (778) 417-0168 and hyd. blade. 6532.7 hrs. Smithers, BC tracks. 2304.2 hrs. $47,900. PHONE: (778) 417-0017 $124,900. glenericgr@gmail.com PHONE: (250) 468-1000 PHONE: (250) 468-1000 JIM: (250) 287-1214

COASTAL PACIFIC EQUIPMENT

MONTHLY SPECIAL

1-800-811-6911 • (250) 392-7755

2004 Hitachi ZX270 LC Roadbuilder ...... ....................................................... $64,500

coastalpacificeq@gmail.com

685 South Mackenzie Avenue, Williams Lake, B.C. V2G 1E2

2008 Dressta TD9M w/6 way, Encl. Cab, 3,208 hrs ................................................................ Huge Savings! CALL 1990 TD15E - Angle or Semi-U blade ............................. CALL 2013 Dressta TD 15M, 1,378 hours, w/6-way blade, ripper or winch ............................................................................... CALL 1987 Dresser TD20G with angle blade & ripper ............. CALL 2009 Dressta TD20M LT, Ripper, Cab, new motor, trans. & U/C................................................................................... CALL 2012 Dressta TD20M LT 7,890 hrs - Excellent Cond. .... CALL 1981 Dresser TD25E with A/Blade, Ripper .................$35,000 1996 Dresser TD25G A-Blade, Cab, Ripper New U/C .$90,000 2004 Dressta TD25H 8,000 HRS ............................. $135,000 Timberjack 520 Swing Grapple, 24.5 x 32 tires, rebuilt trans. .....................................................................................$22,000 2015 Case SV300-2 Skidsteer, 2,535 hrs ... Huge Savings! CALL 1994 Cat 320EL, with thumb & guarding ...................$27,500

MISCELLANEOUS · · · · · · · · · ·

TD9, TD10, TD12, TD15C, TD15E, TD25C-E rippers TD12C, TD15C-E, TD20E-G-M clearing rakes TD20E-G-M, TD25E-G Semi U blades TD25C-E-G Full U Blades · CAT D7G Blade & C-Frame Dresser 530 GP bucket · TD15C-E, TD20E-G winches Samsung 210 dig and cleanup buckets Timberjack JD853 used track group Cummins 5.9 (CPL 938) 28L x 26 LS-2 tires New & Used parts for IH-Dresser-Dressta- JD648EKomatsu D65E · Wrecking Dresser 520 wheel loader, Samsung 210LC · JD748G3 Grapple Assy and Tigercat 630D Grapple Assy

Check us out on Facebook!

NEWLY LISTED 1988 988 B Bucket machine......$55,000 1985 Ford L8000 Crane Truck ....$10,500 John Deere 67B Grader ...........$24,500

INVENTORY Hardly Used CWS Lugged Brush Rake for 300/350 ...........................$6,000 Caterpillar D8H Dozer ..................... POR Cypress 7280 Grapple Yarder, Rebuild ............................................................ POR 1996 Madill 3800 BNT ...................SOLD Caterpillar 330B Roadbuilder ........ POR 20-Ton Tippy Trailer ......................... POR Kent Hydraulic Rock Breaker .......POR

Give me a call and let me know what you’re looking for! WWW.ROYQUIP.COM

250-203-0134 FOR MORE INFO

March 2020

Supply Post · Our Readers Are Your Buyers

FELLER BUNCHERS

Now wrecking JD 450D LC. Langley Excavator Parts Exchange Inc. parts@langleyexcavator. com PHONE: 1-888-530-5444

2014 Hitachi ZX135US-5N w/ Accurate dig and clean up buckets, hyd. thumb, hyd. Q/C, and hyd. blade. 5237 hrs. $144,900. PHONE: (250) 468-1000

2007 Link-Belt 240 LX, 1 3 , 3 0 0 h r s . , c / w hy d . Q/C, 2 buckets, aux. hyd. plumbing, 10hrs. on rebuilt engine. New Rad & hoses, hyd. pump done 10,000hrs. New Berco UC comp. inc. shoes, ver y well maintained since new, smooth operator. $79,000. Langley, BC PHONE: (604) 328-7981

2007 John Deere 225D LC w/new hyd. thumb, 36” WBM dig bucket, 60” WBM clean up bucket, WBM quick change, 32” triple bars pads, and Isuzu engine. 8390 hrs. $118,500. PHONE: (250) 468-1000

FEEDERS 2012 Hitachi ZX290 LC-5 w/ 36” Accurate dig bucket, 66” CWS clean up bucket, CWS hyd. thumb, Accurate cab guard, aux. plumbing. 7733 hrs. $139,900. PHONE: (250) 468-1000

20 yard surge bin, In & Out 36” conveyors, Ready to work!. $32,000. OBO HUGH: (604) 657-7167

MOUNTAINSIDE EQUIPMENT Call Kelly at 1-855-950-1905

2003 Madill 2850 Log Loader .................................... $219,000 2011 John Deere 903K Buncher .................................. $85,900 2013 XCMG CV122PD Packer, 2,399 hours ................... $85,900 2015 850K WLT John Deere Dozer, 2,185 hours.......... $285,000 2016 EC380E with Rock Crusher/Ripper, 3,153 hrs .... $638,000 2007 D6R Cat Dozer, new U/C, 11,800 hrs .................. $129,900 2000 Cat D5H, 10,080 hours ........................................ $43,000 2014 Cat 568 Road Builder, 5,300 hours .................... $305,000 2006 G780B Volvo Grader, 13,670 hrs .......................... $76,000 1996 D8R Cat Dozer, 17,228 hrs ................................. $114,900 2011 870 Tigercat Buncher, 16,385 hrs ...................... $165,000 2014 240 Hitachi Log Loader, 9,320 hrs ..................... $225,000 2014 903K2 John Deere Buncher, 10,794 hrs ................... SOLD 1990 667F Clark Skidder, 8,628 hrs .................................. SOLD 2005 870C Tigercat Buncher, 16000 hrs ..................... $129,000 2015 848L John Deere Skidder, 4,574 hrs .................. $253,000 2016 210 Link-Belt / 622B Processor, 6,856 hrs ......... $239,000 2012 1910E John Deere Forwarder, 18,200 hrs .......... $176,900 2008 903J new injectors, fuel pump, front window, stick bushings, batteries, new top sliders, main pump replaced 2 yrs ago ..................................................................................... $65,000 2011 320FM Cat / 622B Processor, 14,836 hrs........... $165,900 2017 LX870D Tigercat Buncher, 5,600 hrs.................. $515,000 2016 855C / 600 Southstar Processor, 7,900 hrs ....... $464,900 2015 210 Hitachi / 500 Southstar Proc., 6,800 hrs..... $289,000

Page 43

FORKLIFTS

GENERATORS 70 KW 3 Ph. Cat Diesel GenSet fully enclosed unit. P.O.R. Kelowna, B.C. Juniper Equipment Ltd. PHONE: (250) 470-8987

GRADERS 1999 Tigercat 860, 18,000 hours, some new parts, ready to work. $50,000. PHONE: (250) 392-6181 OR (250) 267-6377

2017 Hyundai HL757TM9A Rough Terrain Forklift, 22,000 lb lift, 178 HP Cummins 6.7 diesel, 33000 lbs operating weight, 200 Can’t find what you are hours, 20.5 by 25 16 ply looking for? Thousands of tires, 4 forward speeds, 3 more machines and equip- reverse speeds. ment for sale on: Woodland Equipment PHONE: (250) 372-2855 www.supplypost.com

2008 Moffett M8 Original owners, Up to date on all ser vices and maintenance requirements. 3469.9 Engine hours. This machine is work ready. $35,000 CAN. Kamloops, BC. lando.mccarthy@hhkam loops.ca PHONE: (250) 682-1457

2 0 0 2 C AT 1 6 0 H E x c . Shape Snow Pro Tires. Serviced regularly $85,000. Fort St. John, BC Midsun2@telus.net PHONE: (250) 262-9647

PRINCE GEORGE

LNH EQUIPMENT

250-561-1234 - www.pgtruck.com

LOOKING TO BUY USED EQUIPMENT • ALL CONDITIONS • TOP PRICES PAID

TRUCK & EQUIPMENT

1-800-946-9400 EQUIPMENT

• 2006 JD 2054 Waratah 622B Processor ........... POR. • 1993 Ford 9030 w/Seppi Forest Mulcher ...$49,900. • 3412 Cat GenSet 906KVA, 600/480 Volt .......... POR. • TD20G & TD20E Dressers, w/winch & ripper....POR. • 2000 Timberjack 4x4 20K lb Forklift ...........$16,000. • Onan 18kW GenSet, 1 or 3 ph., w/trailer .....$7,500. • Model 5000-21 Superlift Str. Boom Crane ......$4,950. • 2012 Alkota National Pressure Washer........$4,950.

TRUCKS & TRAILERS • 2007 53EQT Tridem BWS Step Deck ................ POR. • 2007 Red Western Star 4900 .......................... .POR. • 2009 Volvo D13 Autoshift ............................... .POR. • 2015 W/S Tri-Drive Tractor ............................... POR. • 2005 F/L Tri-Drive Winch Tractor ...................... POR. • 1998 Peerless Super B Logging Trailer ................. POR. • 1999 Superior Super B Logging Trailer ................. POR. • 1995 Doepker Tridem Clam Dump ................ $18,500. • Tridem Hayracks ................................................... POR. • Assorted Water Tanks and Trailers Available....... POR. • 2013 Volvo D13 Auto Shift................................ POR. • 2006 IHC 4400 Tandem 26’ Collins Van w/rail gate .POR. • 1990 IHC DT466 Flat Deck ................................ $6,500. • 2009 Durastar S/A w/ Reefer Van .........................POR. • 1999 FL80 Tandem 24' Deck, Moffat Fork Lift ......POR. • 1986 IHC Tandem Water Truck ...................... $17,900. • 1994 W/S Service Truck w/Fassi Crane ........ $26,500. • 1995 Tremcar Potable Water Tanker, Tridem ....................................................................$19,500. • 2014 BWS Ez-2-Load Hiboy 53' Tridem ............ POR. • 2012 IHC Prostar Autoshift Tractor .................. POR. • 1991 GMC Topkick Serv Fuel Truck, crane.$12,900. • 2005 48’ Great Dane Tandem, Dry Van ............ POR. • 2005 Westec Vac Tank ..................................... POR. • 1990 ParPac Tri-Axle ........................................ POR. • 1990 KW T800, Cummins, 5th Wheel .........$10,500. • 1981 Ford, 20’ box, p/tailgate, Allison trans. ... POR. • S/A & Tandem Axle Jeeps................................. POR. • 1998 Kenworth Tandem Dump Truck .............. POR. • 2005 Cancade Tridem End Dump ...............$28,500.

WRECKING • 793 JD Buncher • 2200 Madill • 748G Skidder • G67 Grapple • TD20E • Timberjack 450A & 520 Grapple Skidder • Hitachi EX200-5 • 230 & 404 Timberjack Line Skidder • Clark 668B Line Skidder • Clark 125B Loader • John Deere 693D • Treefarmer C7 & C8 Line Skidders • 82-40 Terex • TS24 • Warner & Swasey Grad-All 300 Hydro Cruiser • Good selection of Detroit Diesel, Allison, Clark, Twin Disc, Cat, Cummins and Perkins engine and trans. parts.

CALL TODAY EXCAVATORS / PROCESSORS / LOADERS 2002 Link-Belt 135, Isuzu power, 2 buckets & thumb, hyd. quick attach, hour meter changed @ 4,000 hrs - meter shows 3,761 hrs, rails replaced recently, runs & works well, delivery avail. .... $49,500 2008 Hitachi ZX350, 6,300 hrs orig., 2 buckets, recent undercarriage, plumbed for thumb. ................................... $110,000 2007 Komatsu PC78MR-6, 2 buckets & thumb, 7,800 hrs, window guard, dozer blade, recent rubber tracks ............................. $39,500 2015 John Deere 135G, 2 buckets, pro-link thumb, dozer blade, 4,800 hours ...................................................................... $125,000 2013 Takeuchi TB153FR 6.5 ton, 1,800 hrs, dozer blade, hyd. quick attach, wrist/dig bucket, hyd thumb, new tracks, full cab heat & A/C ........................................................................................... $49,500 1994 Case 580, 4-in-1 Extendahoe, good brakes, new master cylcinder on both sides, tire chains,, one dig bucket, 8741 hours ..... ........................................................................................... $14,500 1993 John Deere 310D, 4x4, 4-in-1 extra hoe, hyd. Quick attach or loader, comes with one dig bucket, full cab with heater or A/C, Ex municipal serviced regular, 9,922 hrs ................................. $19,500 1991 Case 590, 4 x4, 4 in 1 bucket, 2 stick backhoe controls, extendahoe, 1 dig bucket, runs and works well. hour meter not working .............................................................................. $24,900 2014 Takeuchi TB138FR 3.5 ton, 2040 hrs, dozer blade, wrist bkt, Q/C, dig bkt, thumb, ripper tooth, full cab heat & A/C .......... $32,500 STREET SWEEPER 2008 Lay-Mor 6HC Street Sweeper, 6’ angle broom. Kubota diesel engine. 382 orig hours. Exc.cond.work ready. Asking ............ $9,500 TRUCKS & TRAILERS 2009 Freightliner M2 Plow/Sander, Cat C-13, Diesel Allison auto trans, front plow and rear sander, ex municilality, current AB certification, great shape! .................................................. $47,500 2007 International 7500 vac/septic truck, 247,000 kms, 11,400 hrs, 13 spd., heavy spec, 20,000lb, front end, very good rubber, VIN#1HTWNAZT27J47860, hyd. open rear tank door., FT&M RCF 1200 vac pump .................................................................. $35,000 2005 Western Star T/A Vac Truck 346,069 kms, 18 spd, 13,628L steel tank, series 60 Detroit, new hi-bon vac pump, heavy spec, lots of work orders .................................................................... $52,500 FINAL DRIVES Link-Belt 240 LX final drives with drive motors ................... P.O.R. Cat 315 Final Drive Complete w/Propel Motor ........................CALL ATTACHMENTS 2003 Waratah 622 Processing Head, can be seen running, no breaks or welds, complete with everything ...............Open to Offers Complete Hyd. Thumb off Volvo 240, includes all parts & brackets ............................................................................................. $4,500 Various Excavator buckets to fit all size machines ................CALL 2014 Hyundai 210-9 Forester burn unit for parts ...................CALL Recently In – 2004 Volvo 240B Forester – Burnt Unit, will sell complete or parts; c/w Q/A, dig bkt & hyd. thmb ......................CALL 2004 Volvo 210B Forester Burnt, complete or parts ...............CALL Volvo A40C complete, for parts ...............................................CALL Hitachi EX200-1 • Cat 330 BL ................................................CALL

TF: (844) 849-4257

www.lnhequipmentltd.com for complete inventory and pictures

Page 44

Supply Post · supplypost.com Advertise your machines in the classifieds! Call Sheryl for deadline and rates. CALL: 1-800-663-4802

HAMMERS

1997 Champion 750A - low hrs. on motor, diff, trans. C/W left-hand & right-hand snow wing, front dozer blade, many spare parts. $55,000. Burton, BC Rubi Contracting Ltd PHONE: (250) 265-8878 Next Advertising Deadline is March 20, 2020.. Call Sheryl for rates. CALL: 1-800-663-4802

2005 Volvo L220E, 7 yd, MARINE 27,000 hrs, good W/O’s. Ex Albion ferr y Ramp $74,000. CALGARY: (403) 291-1010 94’X14’, Load Certified 100 ton 5 axles. LOGGING CONTRACT PHONE: (604) 483-4336

LOADERS (Skid Steer)

Hammers to fit your carrier! Own or Rent. vanedequipment.com PHONE: (604) 888-9020 PHONE: (877) 255-9293

LINK PARTS LTD. S ER VIC E

1995 Hitachi EX300-3, burnt, parting out; 1999 Hitachi 330-5, burnt, parting out. 2000 Hitachi 370, burnt, parting out. PHONE: (604) 240-7977

2013 JD 333D well main., good tracks, snow, tooth buckets, forks. low hrs, Salmon Arm, BC. $57,900. PHONE: (250) 793-8492

LOADERS (Wheel)

EQ UIP MEN T

FELLER BUNCHERS 2015 John Deere 959K 4,500 hrs FR24B Head .................................. $219,900 2006 John Deere 909J 11,000 hrs 22" Head ....................................... $74,900 2014 Tiger Cat 870C 6,500 hrs 24" Head ......................................... $239,900 PROCESSORS 2002 John Deere 2554 Waratah 622 Warrior Head .............................. $49,900 2006 Madill 1800 Waratah 622B Head ............................................. $134,900 2016 John Deere 2954D Waratah 624C Head .................................. $424,900 LOG LOADERS 2013 John Deere 2954D 14,000 hrs Tmar Heel & Grapple ................ $129,900 2014 John Deere 2954D 11,000 hrs Tmar Heel & Grapple ............... $149,900 1996 Hitachi EX400LC-3..................................................................... $29,900 2012 John Deere 3754D 11,000 Hrs $75,000 in Repars & new UC ... $219,900 1998 Hitachi EX270-5LC Clam .......................................................... $34,900 2002 Caterpillar 322C FM Clam ........................................................ $54,900 2016 Madill 3800C Tmar Heel & Grapple ......................................... $399,900 2003 Kobelco SK370 Heel & Grapple ................................................. $34,900 2001 Caterpillar 330B FM Heel & Grapple .......................................... $59,900 2013 John Deere 3754D 7500 Hrs Tmar Heel & Grapple .................. $149,900 EXCAVATORS 2006 John Deere 3554 w/ Digging Bucket ......................................... $44,900 1995 Caterpillar 330L RB Back Spar hoe w/ Digging Bucket ................ $21,900 2007 John Deere 450DLC w/ 48" Digging, 84" Clean Up, Ripper ......... $84,900 2002 Caterpillar 330B w/ Digging & Clean Up (Heel and Grapple sold seperatly) ............................................................................................................ $49,900 WHEEL LOADERS 1985 Caterpillar 988B Log Grapple .................................................... $38,900 BULLDOZERS 2002 Hitachi DX75M ............................................................................ $24,900 1990 Caterpillar D5H LGP ................................................................... $38,900

2011 John Deere 844K, Unit 0U638476, 10163 hours, bucket, scales, 29.5 tires, less diff locks, Serial # 1DW844KXLBD638476. Located Terrace, BC. Brandt PHONE: (888) 2-BRANDT Cat 980F. Asking $69,000 OBO. 2004 Cat 980G. Asking $129,000 OBO. Langley, BC. dave@infinitywest.ca PHONE: (604) 240-7977

1994 Timber Jack 480 Grapple Skidder ............................................... $18,900

1977 John Deere 640 Line Skidder ................................................. $5,900 DRILLS

Caterpillar M40 Tank Drill ................................................................. $34,900 OFF HWY LOGGING TRUCKS 1970 Kenworth 850 Off Hwy ................................................................ $29,900 1974 Hayes HDX45-115 .................................................................... $59,900 1964 Hayes HDX45............................................................................ $39,900 1980 Pacific P16 ................................................................................ $59,900 SELF LOADERS 2007 Kenworth T800 ........................................................................... $34,900 MISC TRUCKS

2006 John Deere 250D ADT, Rock Truck ...................................... $64,900 1979 Ford F600, Fire Truck ......................................................... $11,900 1996 Peterbilt 377, Fuel Truck ...................................................... $11,900 CREW BOATS 1984 West Bay 24' 8 Passengers........................................................ $58,900 1998 Coastal Craft 25' 12 Passenger ................................................. $79,900 1984 Grady White Twin 150 Yamaha Outboards .................................. $29,900 TUG BOATS 1956 S. Madill GM 671 ........................................................................ $34,900 OTHER

Powder Mag Rebuilt with-new door .......................................... $11,900 53' Shop Trailer Loaded -- Hose Press ect. ............................... $39,900 PARTING OUT - CALL FOR PRICING 1999 Tiger Cat 860 Feller Buncher • 2005 Hitachi ZX350 FM Log Loader 2000 Hitachi EX350LCH-5 Excavator • 1991 Avelny Barford RXD28 Rock Truck

linkpartsltd.com Cell: 604-240-7977 | Office: 604-882-0004

• • · · • · · • • • • •

Quality, built in BC to your specs, Screen Decks 3’ x 5’ to 5’ x 10’, Conveyors, Feeders, Placer. Kelowna, BC. Juniper Equipment Ltd. PHONE: (250) 470-8987

SAWMILLS

PORTABLE SAWMILLS INDUSTRIAL SAWMILLS BLADES & BLADE MAINTENANCE. PHONE: (877) 866-0667

1985 Bros SP3000, 9 FOR SALE REPLACE- Wheel, Wobbly, twin tank, ABLE L O G G I N G runs great, Wisconson Equipment For Sale Online power $3800. Wetaskiwin CONTRACT (Evergreen) – We have thousands of AB 6 1 , 6 0 0 m 3 A n n u a l l y, equipment & trucks for sale PHONE: (780) 362-0874 South Thompson Region, at SupplyPost.com! Log on Conventional – Stump to PROPERTY today... Truck, $20.00 m3 OBO RV Lot on Shuswap Lake, www.supplypost.com PHONE: (250) 679-8051 70 amp power, water, SCREEN PLANT s e w e r, c a b l e , b e a c h , LUMBER cement boat launch, pri3” & 4” Lowbed decking up vate boat slip, docks. to 24’ long. 2x8 truck deck- $99,000 OBO ing 12’ to 24’ long. 2x6x8’ D. ERNIE: (604) 856-3436 fir k. dry $5.49/ea. 2x4x16’ SAND & GRAVEL k. dr y $6.49/ea. 2x10 2012 Terex Finlay 683. 6’ k. dry 8’ to 20’ $1.10/ft. x 13’. 1764 hours. Sizing Bridge timbers cut to size. Screening Plant Caterpillar Poles for pile driving, any 4 cylce diesel, levelling size. Metal roofing and wall cat walks, remote grizzly. cladding. We deliver “even to the moon’. Used Sand Screws avail- TRACK READY TO GO TO can-ambuildingsupply@ able, 24”, 36” and 44” sin- WORK. Located in Yorkton shaw.ca gles, For details and pric- Sask. $160,000. CAN-AM LUMBER MILL acelectric6@gmail.com. ing phone PHONE: (604) 580-1415 PHONE: (306) 621-6420 HUGH:(604) 657-7167

WYATT’S USED EQUIPMENT

“We Service What We Sell” Ph: (250) 546-6518 • Fax: (250) 546-3100

1978 Cat D9H Dozer, UBlade & Ripper. ...................$75,000 1991 Cat D8N Dozer, T/T Angle Blade & Ripper ..... $97,000 1984 Cat D8L Dozer, T/T Angle Blade & Ripper ......$90,000 1979 Cat D8K Dozer, UBlade & Ripper. ..................$42,500 1978 Cat D8K Dozer, T/T Angle Blade, Winch .........$47,500 1972 Cat D8H Dozer, Angle Blade & Drawbar .........$35,000 2009 Cat D6N LGP, 6-Way Blade & Ripper ...........$135,000 Komatsu D85E-21 Dozer, T/T Angle Blade & Ripper, Rebuilt Engine .....................................................................$85,500 2002 Komatsu PC300LC-6 Excavator, 2-Bkts., Thumb, Chuck Blade, 16,500 Hrs.........................................$54,500 2013 Cat 314E LCR, Like New, C/U Bkt., 1,158 Hrs$127,500 2013 Cat 314E LCR C/U Bkt. & Thumb, 1,916 Hrs ...$125,500 2004 Case 921C Loader ..........................................$18,500 1979 Cat 966C, Log Grapple, Snow Plow Blade......$28,500 1998 Champion 750 Grader, 11,211 hrs, c/w 2 Sets of Chains and Snow Wing ...........................................$54,500 2000 Champion 740A, 14’ MB, Ripper & Wing .......$55,000 1997 Taylor GT210 Forklift ......................................$15,000 1981 Cat 631D Scraper ...........................................$45,000 2016 Cat 325D LL, WBM power clam, 5,000 hrs .$395,000 2001 Liebherr 932LL, Grapple, Needs Hyd. work ...$24,500 2014 John Deere 848H Grapple Skidder, 7,000 Hrs, Chains & Dual Function Grapple .......................................$160,000 1986 Cat 518 Skidder, ESCO Swing Grapple & Clark Winch, Cat 528 Diffs ...........................................................$28,000 Cat D5H Winch c/w Controls & Pump.....................$13,500 Cat D7R Winch........................................................$10,000 Cat D8N Fuel Tank .....................................................$1,800 Weldco Beales Chip Blade, fits Cat D8N, complete.....$12,500 Cat D6C LGP Straight Blade ......................................$4,250 Limmit 2300B Stroke Delimber w/Mount & Comp ... $2,750 Tree Tow Dresser TD20E Grapple ..............................$5,000 Weldco Beales Bush Blade, fits to Dresser TD20 ......$2,500 NEW Accurate Komatsu PC308 Exc. Thumb .............$6,000 WBM Cat 973C Side Dump Bkt, Like New ................$7,500 Cat D11 U/C, 6 Sprocket Segment, Idler & Roller ..$10,500 NEW Komatsu Idler, fits PC 400-6 or HD300-6 ........$1,950 Parting Out 1975 Cat 14G Grader & Cat D5H TSK......Call

4274, Box 557 Hwy 97A North, Armstrong, B.C. V0E 1B0

Call 250-706-8594

NEW PARTS for IHC - Dresser - In Stock, including Exchange Transmissions, Steering Drives & Drop-In Motors, Carco Gearmatic Winch Products FULL TRACK PRESS FACILITIES Complete Excavator & Crawler Tractor Undercarriages Berco, Trek & Intertractor

GRAPPLE YARDERS SKIDDERS

PACKERS

BROWN INTERNATIONAL SERVICES

1975 Washington 78A ........................................................................ $98,900

March 2020

MACHINES FOR SALE

IHC H80B, runs well, c/w bucket............................................$10,000 IHC H80B, c/w bucket..............................................................$6,800 D-6 TD15E Grapple ..................................................................$4,500 TD15E Semi-U Blade ................................................................$4,500 D-7 17A machine, not running .................................................$3,500 TD20 E/G double angle tilt blade.............................................$3,500 Cat D8K Beales brush rake.......................................................$6,000 TD15C Beales brush blade .......................................................$4,000 TD15C Winch, Carco F50..........................................................$3,500 TD20G-20E Grapple ..................................................Reduced $5,000 TD20E GUTO DVT 800 engine ...................................................$9,500 Dresser TD9H/D39/TD10M, 39 link, rails, c/w 22” pads, new take off, track fit ..............................................................................$5,800 · Dresser TD20E/G 42 Link Track Grps, c/w new 26” SS pads .......................................................................................... IN STOCK · Komatsu PC300, New rock guards ...........................................$1,200 • Cat D7 17A Pup Engine ............................................................$2,500 · 924 Cat, New QA coupler, Weldco Beales ................................$1,500 · New Hitachi EX200, thumb, Wajax ...........................................$3,800 WRECKING: Hitachi EX200LC-1 c/w good tracks, thb, boom, final drive; IHC S8A Skidder; Cat D7 17A; Komatsu D85E-18, good U/C; TD20C Large Inventory Of New & Used International & Dresser Parts & All Brands of Undercarriage

www.brownihc.com |E-Mail: info@brownihc.com

March 2020

Supply Post · Our Readers Are Your Buyers

TRAILERS

Powerscreen Commander 510, Deutz diesel, low hrs. 1,759, double deck, shredder, hyd. Grizzly, Great cond., $79,000. CAN., OBO. Also available attachable 5032 hyd. radial stacker. Pitt Meadows, BC btmehl@telus.net

TELEHANDLERS

2014 JCB 514-56 Telehandler, Very desirable, rare high capacity, low hour unit available immediately, 14,000 lbs. capacity w/ 56’ reach, 4,160 Hrs., full cab with a/c, new solid filled tires, Like NEW condition, Call for more info. $132,500 CAD Xtreme Rentals sales@xtremerents.com w w w. x t r e m e r e n t s a n d sales.com PHONE: (604) 841-6381

1983 Knight Booster, Good condition, $10,000 obo PHONE: (604) 626-1360

TRUCKS

Phone: (250) 833-8349

TRUE NORTH EQUIPMENT INC.

1-780-722-8129 · www.truenorthequipment.ca 2007 Waratah 624B Harvesting/Processing Head .......$49,500 2010 Deere 2954/Waratah 624C, 18,000 Hours .....$90,000 2005 Deere 850J Dozer, 6-Way Blade, Ripper, Cab w/ Brush Guards, 50% U/C, 8,000 Machine hrs., 2,000 hrs. on New Engine .........................................................................$103,500 Weldco 250 Series 40” Excavating Bucket, 5 Teeth, Kat Lugging ...........................................................................$3,995 2016 Tigercat 870C Feller Buncher, 7,400 Hrs .......$395,000 Hultdins SG520S Grapple, c/w GVS173 Rotator ..........$7,920 2012 Hyundai 210LC-9, Waratah 622B Processor, Forestry Cab, Guarding, High Walker, 19,500 Hours ..................$89,500

MARCHER SKIDDER TIRES & CHAINS

Ashley Roney: 250-845-9169

SKIDDERS: 2005 CAT 535B, Good Condition, 60% Rear Tires 10% Front, Spare Tire and Rim, Newer Transmission, Newer Cradle Pins and Bushings, New Pins and Bushings for Steering Cylinders, Heat, A/C, Currently Working, Well Maintained. 14,090 hours ..................................................................... $65,000 1990 CAT D6H SKID CAT, Good Condition, 90% U/C, Newer Engine, C/W Tree Tow W/ Esco Grapple, DAT Blade, Sweeps Screens, Heat, A/C, Well Maintained, Ready To Work. 17308 hours ......................................... $75,000

GRADERS: 2010 CAT 160M AWD, Very Good Condition, 80% Tires( Will Have New Fronts), C/W 16’ MoldBoard, Hydraulic Snow Wing, Multi Shank Ripper, Heat, A/C, Stereo, Well Maintained, Ready To Work, 10136 hours$120,000 2006 DEERE 772D, Good Condition, 60% Snow Tires and Chains, 6X6, Newer Engine, 14’ Moldboard, Hydraulic Snow Wing, Ripper, Heat, A/C, Stereo, Espar Coolant Heater,Work Orders Available, Tight, Very Well Maintained, Ready To Work. 18225 hours ......................................... $68,000

EXCAVATORS: 1978 CAT 225, Good Condition, 80% U/C, Cab Guard, Cat Walks, Rock Guards, Hydraulic Thumb, 2 Buckets, Q/A, Newer Cat Reman Engine, No Leaks, Ready To Work, 12,400 hours .................................................. $23,000 2012 VOLVO EC300DL, Very Good Condition, 80% U/C, New Rails, C/W 48” Dig Bucket Only, Q/A, Hydraulic Thumb, Danfoss Valve, Cab Guard, Catwalks, Heat, A/C, Stereo, Tight, Very Well Maintained, Ready To Work. 5800 hours ............................................................................................ $135,000

PROCESSORS: 2011 CATERPILLAR 324D FM, Good Condition, 60% U/C, Rock Guards, Forestry Cab, C/W Waratah HTH623C, Timbermatic Computer, LED Lights, Heat, A/C, Stereo, 16,000 hours. Well Maintained, Ready To Work$175,000

FELLER BUNCHERS:

2012 Hyundai 250/Southstar 585 Processor, 6750 hrs ....................................................................................$220,000

2004 TIGERCAT L830, Good Condition, 65% U/C, Tilter, Zero Tail Swing, Newer Cummins Engine, Rebuilt Rotary Manifold, Heat, A/C, Tight, Well Maintained, Ready To Work, 18855 hours ....................................... $130,000

2000 Prentice 620, Quadco 5600 head, newer engine & undercarriage ...............................................................$93,500

2008 DEERE 903J, Good Condition, 50% U/C, Resealed Control Valve, New Batteries, FR 22” 360 Head, Heat, A/C, Radio, Well Maintained, Tight, Ready To Work. 15,000 hours .............................................................. $70,000

2009 TimberPro 830B Combo, Shortwood Bunks, Hultdins Grapple, Tracks, 9,200 hrs ..........................................$208,000 2011 Hyundai 250LC-9 Excavator, Q/C, 2 Buckets, Hyd. Thumb, 2,300 Hrs.......................................................$135,000 2012 Hyundai 210LC-9/LogMax 7000XT, 12,500 hrs. ...........................................................................$124,500 2018 Ardco AMT 600 Articulating truck ................... $POR

Evenings (250) 835-4678

Located in Sorrento, BC

2020 WESTERN STAR 4700, DD13 – 470HP, RTLO16918B, 20,000# front axle, 46,000# rear axles, c/w: Can American Soil King Extreme Slinger loaded truck, includes auto Next Advertising Deadline greasing system 2 IN is March 20, 2020.. Call STOCK Sheryl for rates. P&R Truck Centre CALL: 1-800-663-4802 ED MURRAY: (250) 812-2925 1989 Arnes S/Steer booster, Tandem 11/22.5, 2 big bag, W/B Susp, Ex Cond. CVIP. $7000. Wetaskiwin AB PHONE: (780) 362-0874

2018 Decap 40’ Clam D u m p Tr a i l e r Tr i d r i ve Tridem. Hauls 35 Tonne. E l e c t r i c Ta r p , P u s h Block, Clean Outs, Dual Air Tanks, Disc Brakes, Aluminium Wheels FST819 Tires. Special Ordered, $56,000. Kamloops, BC HAR VER B ENT. INC harverb@telus.net PHONE: (250) 319-8438

Wally’s tires

Quality New Tires & Chains

1996 Doepker Super B, Refurbished super B trailers. New kingpin, new cross members and deck, fresh 2000 Gerrys booster, 8 paint, current MVI. $47,000. bag, tandem 275/70/22.5, OBO. Chilliwack, BC. pin on adapt, flat back J&E Hat Sales Inc. $9000. Wetaskiwin AB jehaysales@gmail.com PHONE: (780) 362-0874 PHONE: (604) 819-6317

Wayne Giles: 250-691-1650

Page 45

WHEEL LOADER: 2011 DEERE 544K, Very Good Condition, 50% Tires, Fully Loaded, C/W BOE Bucket, Pallet Forks, Auxiliary Steering, Hydraulic Q/A, Heat, A/C, Stereo, Tight, Well Maintained, Fresh Service, Ready To Work. 12072 hours ....... .................................................................................................................. $98,000

1-888-905-7821

Complete inventory and photos at: www.majorequipsales.com Like us on Facebook

• Economically Priced Tires & chains • Fast Shipping • Mounting Available (Locally) • Trade-Ins Welcome

*INTRODUCTORY PRICING* SKIDDER TIRES

• 24.5 x 32 - 20 ply......................................................... $2,500 • 30.5 x 32 - 26 ply ........................................................ $3,200 • 35.5 x 32 - 26 ply......................................................... $4,400

SKIDDER CHAINS • 30.5 x 32 - 3/4” link - Diamond Style .......................... $4,000 • 35.5 x 32 - 3/4” link - Diamond Style ........................... $4,400

Wally’s Private Parts Quality Used Parts

Phone: (250) 833-8349

Evenings (250) 835-4678

Located in Sorrento, BC

RUNNING MACHINES FOR SALE • JD 748E, recent work orders, call for details ...... $27,000 OBO • WCB Clam Grapple ..................................................... $12,000

PARTS MACHINES Skidders John Deere 640D-Just came in • John Deere 848H Skidder • John Deere 648D Grapple Skidder • Burnt 648 GIIIJD Skidder• John Deere 648GII Burnt • John Deere 748GII • International S7 Skidder • S10 International Skidder • 748GII Skidder • 2005 Cat 545 Skidder • 545 Cat skidder, 748GIII, 748GII, 848 JD Skidders • 525 Cat Skidder • 630 Tigercat Grapple Skidder • 518 Cat Skidder• S8, S9 International Skidder • 380, 404, 450, 480, 550, 660 TJ Skidders

Excavators 240BLC Volvo Excavator • 220 Hitachi LC • 230 JD LC • 690E w/ Denarco - 3000Stroker • 210 Volvo w/ 2000 Limmit • 240 Volvo Excavator• 210 Volvo Excavator Burnt • Case 1085 Rubber Tire Excavator • Cat 325L Excavator with 2200 Limmit Stroker • 160 Kobelco Excavator 2004 Burnt • 200 LC Hitachi • 2005 330 LinkBelt Excavator • 325 Cat Excavator• Link-Belt 2800 Quantum 3000 Dewarco • 210 300 Komatsu • 210, 200 Hyundai W/ Harricana Stroker • 330, 320, 325, 322, 225, 235 Cat • Hitachi 270 • Hitachi EX200LC • 220 Komatsu

Loaders Log: JD 2054 Log Loader, • 330 Cat Log Loader with Thunderbird Log Loader • 644A Jd Loader Wheel: • 125 Clarke Wheel Loader • Terex 8231 Loader

Bunchers Just came in: 860 & 870 Tigercat Bunchers • Madill 2200 Buncher • TJ 625 Buncher • Madill 2800 w/ 360 Head • 630A Prentice Tilter Buncher • 850 TJ Buncher • 950 TJ Buncher • Timberjack 950 Buncher • Madill 2200 Buncher Burnt • 2007 753 JD Buncher(Burnt) • 748GIII Burnt• 618 Buncher • 2628, 608, 618, 628 TJ Bunchers • 630 Prentice Buncher

Crawler Tractors • D8H Cat, D7F Cat, Komatsu D65D

Graders • 686 & 740 Champion Grader • Austin Western Champion D600-760 Tractors • 630B Tigercat

Trucks • 1995 Freightliner, Series 60 Detroit, 470 Hp, 40,000 Lb 410 Ratio Rockwell Axles, Dbl Lockers

Other parts machines • 320 Waratah Head • Coring Hotsaw 20-22 Head • OMEGA 20-20 Ton Hyd. Crane • Crane Ph 20-1A Omega • Denharco 3000-3500 Strokers

Used Tires and Chains • 35.5 x 32, 30.5 x 32, 24.5 x 32, 23.1 x 26 • 18.4 x 34, 26 x 28 • 18.00 x 25 • 14.00 x 24, 16.00 x 24, 20.5 x 25

Tracks • 618, 628, D6, D7, 200

Running Motors • 8.3 5.9 Cummins; 671, 353, 453, 471, 6V53 • Detroit Diesel; 466, 414, 4276, • 4045 John Deere

Visit www.SkidderBuncherParts.com MASTERCARD For More Info & Photos! VISA &ACCEPTED

Page 46

Supply Post · supplypost.com

Nova Scotia Marks Milestone In Export Growth

Advertise your machines in the classifieds! Call Sheryl for deadline and rates. CALL: 1-800-663-4802

2005 T800 KW, C15 550 2 0 0 5 C AT 7 7 7 D, S N : 2019 Western Star Hi-Rail grapple truck w/magnet, 18spd 410 gears 14.6frt, A G C 0 2 2 6 2 , 2 9 , 0 0 0 20,000lb front, 46,000 rear, Super 40rears on 8bag frame hrs., 10,000 hrs. on 470HP DD13 12.8L, RTOair ride and wetline. CALL Caterpillar Reman engine 16908LL trans., 270” WB, 2007 9900i INT, C15 550 FOR $$ & torque. Flat floor body. advanced remote drive JEFF: (519) 580-6480 18 speed 391 gears 4 Transport ready with box system, single 80 gal fuel tank. Air-ride drivers seat, wheel lock 46rears on hen- Advertise your machines in and outer tires removed. 22’6” long by 102” wide drickson air ride and wet- the classifieds! Call Sheryl Asking $325,000 CAD flatbed body. line. CALL FOR $$ Brikers PHONE: (705) 566-1294 for deadline and rates. JEFF: (519) 580-6480

CALL: 1-800-663-4802

sales@brikers.com PHONE: 855-285-1115

WE HAVE MOVED TO KELOWNA! EQUIPMENT FOR SALE 1991 CAT D25D ROCK TRUCK ........................... $19,000 1990 CAT D30D ROCK TRUCK ........................... $23,000 1997 CAT 980G WHEEL LOADER ....................... $41,000 1998 CAT 966F WHEEL LOADER . ...................... $65,000 INGERSOL RAND PACKER.........................................CALL

COMPONENTS FOR SALE CAT 325C,D FINAL DRIVES ................................. $10,900 CAT 325D FM FINAL DRIVES ....................................CALL CAT 330D FINAL DRIVE ...................................... $12,500 EX330LC-5 FINAL DRIVE .................................... $10,500 EX330LC-5 FINAL DRIVE W/MOTOR .........................CALL ZX330LC FINAL DRIVE W/O MOTOR....................... $9500 JD2154D COMPLETE FINAL DRIVES .........................CALL JD2154D TENSIONERS ............................................CALL JD2154D ALL CYLINDERS ........................................CALL KOM PC400LC-7 FINAL DRIVE ........................... $11,000 TCAT 860C UNDERCARRIAGE 70%. ..........................CALL TCAT 870C 5701 HEAD ............................................CALL TCAT 870C 5702 HEAD. ...........................................CALL TCAT 870C TILTER FINAL DRIVE W/ MOTOR........ $12,000 TCAT 870C GUARDING .............................................CALL TCAT 870C BOOM CYLINDERS .................................CALL 2010 622B WARATAH HEAD .....................................CALL CAT D8N,R,T TRACKS 70% PADS ON NEW CHAINS ........................................................ $15,000/PR. CAT 330 49L TG’S 31.5” 3 BAR NEW CHAINS 90% SHOES. ................................................ $11,000/PR.

LOADER TIRES-SPECIAL PRICING 20.5X25 L3 24 PLY ....................................... $3,500/SET 23.5X25 L3 24 PLY ...................................... $4,995/SET 26.5X25 L3 28 PLY ...................................... $9,200/SET 29.5X25 L3 32 PLY .................................... $12,900/SET •

March 2020

WE SPECIALIZE IN NEW, USED AND REMAN REPLACEMENT PARTS FOR ALL MAKES AND MODELS. CAT, JOHN DEERE, HITACHI, VOLVO AND MANY MORE.

2007 Peterbilt 357, 8 M3 McNeilus boost-a-load 2 0 1 5 M AC K C H U 6 1 4 drums., Cat C12 engines. 505 HP, 18 SPD, PTO, F i ve t o c h o o s e f r o m . Pump, Herd Bumper, New Approximately 16,000 hrs. Current CVI, work ready. Steer Tires, Engine, Bunk $80,000. Heaters, Shore Power HUGH: (604) 657-7167 Conver ter, Belly Dump Wiring $84,000. Kamloops, BC HAR VER B ENT. INC harverb@telus.net PHONE: (250) 319-8438

LAST MINUTE

Kingsland 135 ironworker 120 ton capacity/w several shears, notcher & many dies $14,000 obo. PHONE: (204) 243-2453

FOR SALE Pictures Available 2007 FL M2 SERVICE, 106, 4 x 4, brutus body, 8800 cobra crane, MADILL 0-99 YARDER, working condition ...........................$175,000. 1980 MADILL 071 YARDER on rubber, 6V92TA four axle carrier, 4 guy

Source: Novascotia.ca

BRAD’S TRUCKING LTD. 2013 KW T800 Tri-Drive, 550 ISX Engine, 18 Spd, 46,000 lb, 420,000 km .............................................................................$90,000. 2010 KW T800 Tandem, 550 ISX Engine, 18 Spd, Sleeper, 40,000 lb, 350,000 km on Engine .....................................................$55,000.

lines, new paint work ready. c/w Maki 11 carriage ..........$ 150,000. 2 - VOLVO A25C ROCK TRUCKS 12,000 to 15,000 hrs with various new components, working con. .............................................$ 55,000.

2003 KW T800 Tandem Hwy Truck, 550 Cat Engine, New Head, Injectors & Turbo, 18 Spd, 46,000 lb, 72” Sleeper ...........$42,500.

25 TON ARTIC. ROCK TRUCK early 80`s ADT25T-01, working cond., suitable for farm or ranch ........................................................$ 10,500. 2012 HITACHI ZX 350 EXC. with 5500 hrs ................ $ 210,000. OBO.

1999 Doepker Lumber Trailer, 1999 Doepker Lumber Pup, New Paint .......................................................................................$20,000.

1996 CAT 330L EXC. 10,700 hrs, FOPS, thumb, very good u/c, good working cond ............................................................................ $ 50,000. 1995 HITACHI ZX 330, 10,000 hrs, thumb............................... $ 50,000. MORBARK 1000 TUB GRINDER, working cond. .................. $ 87,500. LARGE ASST. OF USED ROCK TRUCK TIRES 750/65 x R25, 30/65 x R25. 15 to 30% ........................................... PICTURES & P.O.R. D10 N/R/T TRACK RAILS, 1 set at 80% ...................................$12,500. FROST FIGHTER, 350,000 BTU, SPACE HEATER, diesel/110 volt.

UNDERCARRIAGE NEW AND USED

model 1df-350-2, good cond. in enclosed cabinet ................ $ 2,500.

•

GROUND ENGAGING (CARBIDE INFUSED OPTIONS AVAILABLE)

3 SETS OF DRYLAND SORTING BUNKS........................... $ 1,000. ea.

•

FINAL DRIVES HITACHI/JOHN DEERE/CAT IN STOCK

2 - WAGNER LOG LOADERS, L4130C & L 90, both in working cond.

•

METRIC AND STANDARD BUSHINGS AND SHIMS

phone for info and price............................................................. $CALL.

1 - PAIR OF 29.5 X 25 LOADER CHAINS, 75% ..........................$ 1,000.

NOW DOING PAD SWAPS FOR UNDERCARRIAGE WE CAN PICK-UP & DELIVER

JRB HYD. PIPE GRAPPLE with quick change 72 inch. x 106 inch,

CALL CORY 778-753-7353 | 250-320-4070

NEW KOBRA HYDRAULIC DRYWALL FORKS ........................$ 1,350.

www.hdpartsltd.com

million or 32 per cent to $138 million. Quick Facts: • since 2016, exports have grown an average of 5 per cent per year • machinery and equipment exports increased $41 million or 33 per cent to $166 million • aerospace parts exports increased $35 million or 68 per cent to $86 million • this is the second year in a row the province has surpassed previous export highs • key provincial programs and services for Nova Scotia businesses to start exporting and to grow include international business development education, export growth program funding, trade missions, market intelligence, logistics support, and export-guided assessment tools available through Nova Scotia Business Inc. b

325 miller, 40 cfm van air comp. Work ready ............. $ 95,000. OBO.

•

cory@hdpartsltd.com

Nova Scotia exports reached a record high in 2019. Exports totalled $6.05 billion last year, up 5.7 per cent from 2018. This reflects three years of continued increases for the province as products and markets have diversified. “More and more customers around the world are recognizing the high quality of Nova Scotia products,” said Premier Stephen McNeil. “I want to congratulate business people across our province for their global success. We have worked hard to build strong international trade relationships and will continue those efforts.” The largest export increases from last year were from seafood products with exports over $2.3 billion, an increase of $277 million or 13.5 per cent from 2018. Tire shipments were up $55 million or 4.9 per cent to $1.2 billion while frozen fruit exports increased $34

as new.......................................................................................... $ 4,500. VOLVO L 150 E, hyd. pipe forks with q / c sliding forks, 64 inch x 106 inch. as new ................................................................................ $ 3,500.

~HOPE MECHANICAL SERVICES~ Phone, Text or Email · easyhope@yahoo.com

Glen at 604-795-6827, Ray at 604-860-3000 HEAVY DUTY MOBILE MECHANICAL SERVICES

Contact Reed at 604-869-6222

Prince George, BC | Phone: 250-562-8086 Cell: 250-612-7183 | Fax: 250-562-8097

WWW.ALBERTAENGINE.COM 64166-426 Ave E Aldersyde, AB T0L 0A0 ENGINE PARTS ENGINES • CALL MARK 403-519-7254 CAT • 3126 .......................................................$2,500 - $4,900 • C7 ...........................................................$4,900 - $6,500 • C7 RB LB .............................................................. $9,500 • C13 NEEDS WORK ............................................... $3,900 CUMMINS • 6BT5.9 ROTARY ................................................... $2,500 • 4BT3.9 RB LB ....................................................... $4,900 • ISL CM554 ........................................................... $5,500 • 4B3.9 .................................................................... $5,000 DETROIT • 4-71 RB ................................................................ $5,000 • 6V92TA DDEC .................................................... $10,900

1-800-361-7333

Ph: 403-720-3494 mark@albertaengine.com

March 2020

Supply Post · Our Readers Are Your Buyers

How Autonomous Construction Equipment Will Revolutionize The Industry Moving earth and building roads with autonomous construction equipment isn’t a reality yet, but it’s where the industry is headed. For many contractors, driverless construction equipment might instill worries about lost jobs or jobsite accidents. But Cameron Clark, who is leading Trimble’s efforts to bring autonomy to civil construction, wants to alleviate those fears. He believes autonomous machines represent a big opportunity that will take time to develop. Automation Is Nothing New For years, earthmoving manufacturers have been adding automation to machines. According to Clark, Earthworks Business Area Manager for Trimble, there are more than 100,000 machines equipped with machine control today.

A dozer with machine control would qualify as Grade 1 automation using the SAE levels of driving automation, where 0= no automation and 5 equals full autonomy. “We are already on the path of automation,” says Clark. “We have gone from people on site putting stakes in the ground to 3D machine control where you can remove the stakes and control the blade automatically to keep grade.” While semi-autonomous machines improve productivity they still rely on the intelligence of a skilled operator. Clark says that with the technology we have today, experienced operators run 41 percent faster and 75 percent more accurate, while new operators run 28 percent faster and 100 percent more accurate. As steering and other machine tasks become more automated, contractors can

Page 47

equipment will be part of the solution, especially in remote areas, for repetitive tasks and in locations where labor shortages are significant.

expect to see greater efficiencies. He expects compactors, dozers and excavators to be key categories of autonomous equipment. Labor Shortages Are Driving The Market Around the world, construction companies are facing a shortage of heavy equipment operators. Clark sees this, along with increased global infrastructure spending, as the key driver for autonomous construction equipment. Cameron Clark, Trimble“It’s hard to do the work we have now,” says Clark. “With growing infrastructure and energy needs there is going to be increased demand for work in developing nations. If we can’t find people in developed nations, what are we going to do in developing nations?” He believes autonomous construction

The Benefits Of Autonomous Construction Equipment According to Clark, an autonomous solution is more than just a solution for a single machine. The autonomous machine has to work with all the machines, other assets and people on the jobsite. “Contractors want to make sure they have an ecosystem solution,” says Clark. One of the areas where Trimble will focus is on the interaction between one machine with one another. For example, imagine two compactors working with a dozer, where automation tells the compactor exactly where to go next on the jobsite. “It’s about fleet management,” says Clark. “Determining what machines are needed, providing improvements in planning and bidding and helping operators make real-time decisions.” Clark believes it would

benefit human operators if automated machines took on more mundane tasks while operators handled value-added jobs. More automation might also help reduce fatigue and stress on human operators, resulting in improved safety. Instead of traveling away from home for weeks at a time, an operator might transition to a different role managing equipment remotely. No one is predicting a jobsite without people in the near future. Clark says there’s more complexity

with a construction site than with cars and trucks that just need to get from point A to point B. The process will take time, but autonomous machines clearly have a role to play. Alleviate your fears and learn what this trend really means for your business. Join Clark for the session How Autonomous Construction Machines Will Revolutionize the Construction Industry on Friday, March 13 at CONEXPO-CON/AGG 2020. b Source: ConExpo

HEAVY EQUIPMENT PARTS & REPAIRS FULL REPAIR FACILITY-FIELD SERVICE • Preventative maintenance contracting • Filters • Oil • Servicing & supplies Servicing all major brands CAT, HITACHI, VOLVO, KOMATSU, DEERE, HYUNDAI

INTERIOR DIESEL LTD. Call today! 250.374.3443 Parts, Service and Sales for Mining, Forestry & Construction. 2045 W Trans Canada Hwy, Kamloops, BC, V1S 1A7

SPECIALS & PROMOTIONS CHIEFTAIN SPECIAL PROMOTION Crusher Parts (In Stock)

JCI SPECIAL PROMOTION Cone crusher bearing offer. A limited supply is available on a first-come, first-served basis. You get an additional 10% discount on the following bearing part numbers:

CONE LINERS • JCI K200, K300, K400, K400+ • Eljay RC45, RC45II, RC54, RC54II • Cedar Rapids MVP280, MVP380, MVP450 • Metso HP300, HP400, 1560 Omni • Sandvik H3800, H4800, H6800 S3800 , S4800 • Clemro XC1400, XC1500

• 456128 • 456156 • 456463 THESE BEARINGS ARE USED ON THE FOLLOWING CRUSHER MODELS:

• JCI 1200LS • JCI K300+• JCI K200+• JCI Kodiak 300 • El Jay RC45 and RC45II • Cedarapids MVP280

JAW PLATES • KPI 2650, 3055, 2854 • Cedar Rapids 2236, 2436, 3042 • Sandvik C12, C12+ IMPACT BLOW BARS (High, Medium, Low Chrome With Ceramics) • Cedar Rapids 5064 • KPI 4240, 4250 • Kleeman • Lippmann • Eagle 1400 WEAR PARTS • Jaws • Cones • Wedges •Blow Bars • Toggle Plates • Torch Rings • Impact wear liners • Cheek plates for crushers • Side wear liners • Wear liners • Crusher wear liners • Apron wear liners

For more details and exclusive pricing Call Darcy 587-873-9554 100-54408 Range Road 260 Sturgeon County, AB, T8T OW2

1-800-601-6787 780-460-2220 www.chieftainequipment.com

parts@chieftainequipment.com sales@chieftainequipment.com

Page 48

Supply Post · supplypost.com

March 2020

GREAT NEW & USED INVENTORY! SALES & RENTALS • SCREENERS • CONVEYORS • CRUSHERS • AGGREGATE EQUIPMENT

1-800-960-9939 | 403-946-4860 | Fax: 403-946-5191

FIRE SALE ON NOW!

2019 McCLOSKEY SDX 130 TELESCOPING STACKER

2017 McCLOSKEY 512R TROMMEL

2018 KOMPTECH CRAMBO 6000S

McCLOSKEY S SERIES DOUBLE DECK AND TRIPLE DECK SCREENERS

MDS INTERNATIONAL 515 HEAVY DUTY ROCKTROMMEL

McCLOSKEY R230 – 3 QUALITY UNITS AVAILABLE

2019 McCLOSKEY TRIPLE DECK WASH PLANT

McCLOSKEY 30X50 ELECTRIC JAW CRUSHER

CALL TYALTA FOR SPECIAL PRICING!

In House Financing now available! Flexible terms and conditions. Call Tyalta Finance today at 1-877-550-0016, finance@tyalta.com

www.tyalta.com | info@tyalta.com

.com FAMILY OWNED, SINCE 1971

SECTION 3

.com MARCH 2020 · PAGE 49

SIX LOCATIONS TO SERVE YOU! Victoria: 888-652-9139 Duncan: 866-746-1515 Langford: 250-915-0350 Nanaimo: 250-756-0026 Burnside (Parts): 250-384-0451 Campbell River: 250-286-1151 Ed Murray: 250-812-2925 Garry Shelton: 250-715-5088

2020 WESTERN STAR 4700, DD13 – 470HP, RTLO16918B, 20,000# front axle, 46,000# rear axles, c/w Can American Soil King Extreme Slinger loaded truck, includes auto greasing system 2 IN STOCK

SELECTION OF 2020 WESTERN STAR DUMP TRUCKS, Cummins X15 and Detroit DD16 power available, Eaton Ultra-shift & 18 speed manual transmissions in stock. 20,000FA and 46,000RA. Nahanni Boxes and Summit Brandon boxes available. IN STOCK AND READY FOR WORK – CALL TODAY FOR PRICING.

Emily Polack: 250-480-8281 Ted Peterson: 604-240-6181 Rob Nessel: 250-710-3626 Craig Willett: 250-287-6169

2020 M2-106, Cummins 300HP, Allison Automatic, 12,000# Front, 21,000# rears, Hydraulic Brake Truck, c/w Collins 26’ Van Body with 4400# tuck away power tailgate READY FOR WORK!

CUMMINS 300HP, Allison Automatic, 12,000# Front, 21,000# Rears, Hydraulic Brake Truck, C/W Ampliroll Al120 -16 With Tool Box And Auto Tarping System RIGGED AND READY.

2020 M2-106, Cummins 300hp, Allison Automatic, 12,000# Front, 21,000# Rears, Hydraulic Brake Truck, c/w Century Wrecker Deck “In Stock And READY TO GO!

2020 WESTERN STAR 4700, Dd13- 505hp, 18 Speed Transmission, 20,000# Front, 46,000# Rears, Nicely Equipped, C/W Nahanni 16’6” Light Steel Box With Pony Wet Kit. 3 TO CHOOSE FROM!

2020 WESTERN STAR MIXERS – 4800 with factory tandem steer, Detroit DD13 with Eaton 18 speed manual and Ultra Shift automated transmissions available. Rigged with McNeilus 14 yr drum. CALL TODAY FOR PRICING!

2020 Western Star 5700, DD16 – 600HP, 18 speed transmission, 13,300# front axle, 46,000# rear axles, loaded truck, great super B spec. PRICED RIGHT – CALL FOR DETAILS!

2020 WESTERN STAR 4900 TRI-DRIVE LOG TRUCK c/w Detroit DD16 600HP, 180ft-lb w/Eaton 18sp manual trans., 20,000# front axle w/69,000 Meritor rear axles, rigged with Pro-Fab truck rig out and PF31 wagon trailer.

2020 FREIGHTLINER CA116 Daycabs, Dd13 – 505hp, Dt12 Transmission, 12,000# Front, 40,000# Rear Axles, Steel And Aluminum Wheels. 2 TRUCKS IN STOCK.

2020 WESTERN STAR 4900 68" Raised Roof Sleeper, Detroit Dd16 600 Hp With Eaton 18 Speed Manual Transmission, 13,300fa, 46,000ra. Great Train Spec. CALL TODAY FOR PRICING.

www.prtruckcentre.com

TRAILERS

Page 50

Supply Post · supplypost.com

March 2020 KENWORTH

Papé Kenworth Honored With Prestigious 2019 Kenworth Dealer Of The Year Award Kenworth Recognizes Leading Dealers for 2019 Achievements, Customer Support Efforts To Maximize Uptime Papé Kenworth received the prestigious 2019 Kenworth Dealer of the Year Award for the United States and Canada at the annual Kenworth Dealer Meeting held recently in Santa Barbara, Calif. It marks the second time in five years that Papé Kenworth was chosen for the coveted award. “Papé Kenworth’s success is driven by great Kenworth heavy and medium duty trucks and our employees’ daily, determined focus to take excellent care of customers in our new truck, parts and service operations in Oregon, California, Washington and Alaska dealerships,” said Dave Laird, Papé Kenworth president. “This prestigious award offers a tremendous source of pride for Papé Kenworth and our employees. We especially

thank our customers for their continued support.” “Papé Kenworth earned the 2019 Kenworth Dealer of the Year Award with exceptional performance across our dealer excellence categories,” said Kevin Baney, Kenworth general manager and PACCAR vice president. “Papé Kenworth recorded an excellent 25 percent heavy duty truck sales share and 16 percent medium duty share. The dealer also ranked high among Kenworth dealers in facility investments, PACCAR MX engines retail and parts sales growth, PacLease operations, and PACCAR Financial heavy duty retail share. Their knowledgeable, well-trained employees possess a strong dedication to serve customers and provide the highest of service excellence. Con-

THE RUBBER MEETS THE ROAD AT CONEXPO 2020.

gratulations to The World’s Best Dealer for 2019.” Over the past decade, Papé Kenworth has now been named Kenworth Dealer of the Year twice, received five Gold and five Silver awards, and earned PACCAR Engines Dealer of the Year and TRP Dealer of the Year. Kenworth also presented eight Gold and seven Silver dealer awards, as well as PACCAR Engines, Medium Duty, Parts and Service, and TRP Dealer of the Year awards. Kenworth Gold Awards Papé Kenworth was selected as Kenworth Dealer of the Year from among Kenworth’s eight Gold Award winners for 2019. Other Gold Award winners are Kenworth Maska, Kenworth Montréal, Kenworth of Cincinnati, Kenworth

Papé Kenworth received the 2019 Kenworth Dealer of the Year Award at the annual Kenworth Dealer Meeting in Santa Barbara, Calif.. From left, Kevin Baney, Kenworth general manager and PACCAR vice president; Jordan Papé, chief executive officer of The Papé Group, Inc.; Dave Laird, Papé Kenworth president; Lance Jorgensen, chief financial officer of The Papé Group, Inc.; and Laura Bloch, Kenworth assistant general manager for sales and marketing.

Sales Company – Salt Lake City, MHC Kenworth – Kansas City, MHC Kenworth – Springfield, and MHC Kenworth – Tennessee. The Gold Award is presented to a select number

of Kenworth dealers each year that achieve the highest level of performance in the Kenworth network. Kenworth Maska had strong heavy duty (23 percent) and medium duty (31

We are showcasing Brandt’s all-new H550 and H650 heavy haul trailers at Conexpo 2020. These beasts are purpose-built to be safer, easier to own, and easier to operate, so you can haul loads more with less hassle. Visit us from March 10–14 in Blue Lot at booth BL116 and BL107 or in North Hall at booth N13223 to see how these Work ReadyTM trailers can help you grow your business.

Not heading to the show? Give us a call at 1-844-388-2770 and schedule a demo today.

MEMBER OF:

1806 2 Street, Nisku, AB, Canada T9E 0W8 brandt.ca/trucks 1-844-388-2770

percent) share and excellent PACCAR MX engine mix percentage. The dealer made the 2019 Kenworth Dealer Top Ten rankings Continued on page 51

March 2020 Continued from page 50

six times, including parts retail sales growth percentage, PACCAR MX-13 engine parts growth, customer satisfaction, and service bay coverage. In the past decade, Kenworth Maska earned 2018 Kenworth Dealer of the Year, PACCAR Engines Dealer of the Year, and three Gold and four Silver awards. Kenworth Montréal has now earned three Gold and four Silver awards in the past decade. In 2019, the dealer achieved solid heavy duty (21 percent) and medium duty (18 percent) share. Kenworth Montréal ranked high in parts retail availability percentage, TRP sales growth percentage, customer satisfaction, PACCAR MX engine technician certification, and parts fleet sales growth percentage. Kenworth of Cincinnati earned its first Kenworth gold award, and finished with impressive heavy duty (29 percent) and medium duty (16 percent) share. The dealer earned recognition on several “Top Ten” lists, including percentage of PACCAR MX engine technician certifications, and heavy duty categories on market share and quota achievement. Kenworth Sales Company – Salt Lake City had solid heavy duty (23 percent) and medium duty (17 percent) share in 2019. The gold winner made more appearances in the Top 10 rankings than any other dealer. These included key customer uptime metrics, such as customer satisfaction, overall facility score, facility investment dollars, parts operations, service

Your Truck & Trailer Connection, Since 1971

Supply Post · Our Readers Are Your Buyers bay coverage, and parts retail availability. MHC Kenworth – Kansas City has now received six Gold and four Silver awards over the past decade, in addition to overall Kenworth Dealer of the Year, and Dealer of the Year for PACCAR Engines and Medium Duty. The dealer had outstanding heavy duty share (42 percent), and ranked high in investments, facilities excellence, new medium duty truck sales, and percentage of certified PACCAR MX engine technicians. MHC Kenworth – Springfield finished 2019 with excellent heavy duty and medium duty share, helped maximize customer uptime with significantly surpassing its quota goals in service bay capacity, mobile service capacity and parts availability. The dealer made several Top Ten rankings, including call center response and facilities. MHC Kenworth – Tennessee significantly surpassed quota goals in service bay capacity, mobile service, and heavy and medium duty sales. The dealer appearances in the Top Ten lists included PACCAR MX engines retailed, heavy duty quota, and percentage of PACCAR MX engine certified technicians. Kenworth Silver Awards During the Kenworth Dealer Meeting, Kenworth also recognized its seven Silver Award winners: Lower Great Lakes Kenworth, MHC Kenworth – Colorado, MHC Kenworth – Georgia, MHC Kenworth – Oklahoma, Motor Power Kenworth – Billings, Truckworx Kenworth – Jackson, and Wichita Kenworth. Kenworth PACCAR Engines Dealer of the Year MHC Kenworth – Oklahoma received Kenworth’s PACCAR Engines Dealer of the Year honors for the second consecutive year. The dealer sold a large number of PACCAR MX-powered trucks, and achieved an impressive 68 percent in PACCAR MX engine share mix. Notable Top 10 appearances also included heavy duty units retailed and call center response. Highly trained PACCAR MX technicians and 24/7 mobile service units aided customer uptime.

Kenworth Medium Duty Dealer of the Year MHC Kenworth – Colorado was named Kenworth Medium Duty Dealer of the Year. The award winner sold Kenworth medium duty trucks to a diverse customer base, including towing, construction, city government, utility, petroleum, landscaping and grocery. The dealer achieved impressive medium duty share (22 percent) and sales quota results, and consistently stocked medium duty trucks at its fullservice locations. Kenworth Parts and Service Dealer of the Year Kenworth Sales Company – Salt Lake City captured the Kenworth Parts and Service Dealer of the Year award with performances at or near the top of every major parts category. The dealer posted significant increases in retail, PACCAR Parts and TRP sales; and grew business through the PACCAR fleet services program by an impressive 29 percent. Kenworth Sales Company facilities and operations scores were in the Top 5 of all Kenworth dealers. Kenworth TRP All-Makes Dealer of the Year Truckworx Kenworth significantly increased its TRP sales, overall parts purchases and retail sales in 2019 to help earn Kenworth TRP All-Makes Dealer of the Year honors. The dealer’s focus on uptime provided customers with outstanding retail parts availability. Truckworx Kenworth continued to leverage new technology to nearly double online parts counter sales to enhance customer support and increase retail sales. Kenworth Dealer Major Anniversaries Kenworth also celebrated significant Kenworth dealer anniversary milestones reached in 2019: 70 years – Rihm Kenworth (South St. Paul, Minnesota); 50 years – Wallwork Kenworth (Fargo, North Dakota); 45 years – MHC Kenworth (Leawood, Kansas); 35 years – TransPower Kenworth (Albany, Georgia); 30 years – Delmarva Kenworth (Dover, Delaware) and Sioux Falls Kenworth (Sioux Falls, South Dakota). b Source: Kenworth

Page 51

NO MOUNT KIT AVAILABLE

2011 TRAILERMATE TM50, 700 hrs, 5,000 lbs @ 24” Stabilizers Down, Can be Truck Mounted

$14,800 + appl. taxes

SPECIAL PRICE

$39,500 + appl. taxes

PM16525S CRANE SERIES 16.5S - EN 12999, Max. lifting moment 108,540ft/lbs (15 t/m), Max. Cap. at Max. Reach: 1635lbs. @ 47”5’ (Kg 740 @ 14,45 mt), KnuckleBoom Crane w/ Double Links, Boom Pk. w/ 15° Negative Angle.

WWW.TRUCKPROVICTORIA.COM FB30 ELECTRIC 3 -TON, 16,500 lbs. c/w Zapi controller, Zibo battery & charger, pneumatic tires, side shift, 4.8M mass.

$19,500 + appl. taxes FD45 DIESEL 4.5 TON, 10,000 lbs. CT Power Counter Balance., 1104D Perkins Diesel Engine, Auto Trans., Forks Lift Height: 178”.

$38,600 + appl. taxes $54,900 + appl. taxes

ALSO AVAILABLE FLPG35 Forklift, Dual Fuel 3.5Ton.................................$26,500 4 x Auxiliary Out Riggers 14Ton................................$3,000 ea. FB25 Electric Forklift, 2.5-Ton.......

SPECIAL INSTALLED FOR 1 MONTH AS A DEMO UNIT PM35525SP CRANE SERIES 35.5 SP - Max Capacity at Max Reach: 4370 lbs @ 45’ 11” (1980 kg @ 14.0 mt) Continuous slewing.

........................................$17,500 Z120R-A13 2015 Barrel Clamp Fits class 2 or 3 Forklift Barrel Clamp & Rotate Function ..................$3,000

MARK SALMON Sales Manager

1-855-656-1689 | Cell: 250-889-1529

sales@pmindustries.ca

TRUCKPRO - PM INDUSTRIES - TRACTION 1785 Mills Road, North Saanich, BC

Office: 250-656-1689 | Fax: 250-656-1305

Page 52

Supply Post · supplypost.com

March 2020

Rosenbauer delivers the 2,000th PANTHER to Fort Lauderdale-Hollywood International Airport (FLL), Florida. The new high-end airport fire truck significantly surpasses NFPA and FAA requirements. Traditional push-back ceremony during handover of the anniversary vehicle. Two brand new Rosenbauer PANTHER 6x6 HRET were put into service on January 13, at Broward County’s Fort LauderdaleHollywood International Airport (FLL) in an event featuring a traditional push-back ceremony. In the future, these vehicles will act as the flagships of the airport fire brigade. The performance, safety, and ergonomics of the high-end devices exceed the requirements of the NFPA (National Fire Protection Association) and FAA (Federal Aviation Administration). This makes the PANTHER at FLL one of the best Aircraft Rescue and Fire Fighting (ARFF) vehicles in the world. Push-back ceremonies are a tribute to the fire services dating back over a

hundred years ago, when the “fire engines” were still horse-drawn, and had to be pushed backwards into the fire stations by crews after an operation. Today, colleagues, family members and the people these vehicles are designed to protect, come to watch new fire trucks being celebrated into service. Outstanding performance The PANTHER is the premier class among Rosenbauer fire engines, an ARFF with outstanding performance values executed with a breathtaking design. The PANTHER 6x6, which is the variant in use at FLL, is powered by a 700 hp Volvo Penta D-16 engine (Tier IV final), which accelerates the 39-ton vehicle from 0 to 80 km/h in less than 34 seconds and allows it to achieve a top speed of 115 km/h. The all-wheel chassis, together with a low center of gravity and its proven rigid axle system, give the PANTHER unmatched stability and safe driving characteristics. The crew is optimally protected during the drive by the certified cabin, which

ARFF

ARFF Flagship Vehicle Celebrates Anniversary is crash-tested according to ECE R29-3 requirements. Fully integrated firefighting equipment The extinguishing technology is at the heart of the PANTHER and has been the core competence of the Rosenbauer Group for more than a century. The vehicles for FLL provide a system output of 7,950 l/min, whereby the water and foam admixture can be simultaneously discharged. The fully integrated extinguishing technology includes two high-performance turrets, one of which is mounted on the extinguishing arm (HRET - High Reach Extendable Turret), and the other on the front of the vehicle (HVLA - High Volume Low Attack Turret). Up to 4,550 l/min of extinguishing agent (water or water/ foam mixture) can be applied via the HRET and/ or HVLA monitors. Throw reaches from both monitors of approx. 85 m enable firefighters to work from a safe distance while covering the entire length of any aircraft fuselage. The extinguishing arm can be raised

up to 16.5 m and enables targeted firefighting from an elevated position. The extinguishing arm is also equipped with a piercing tool, the spike of which can be pushed through the shell of the aircraft in order to deliver extinguishing agents to an aircraft’s interior cabin or cargo compartments. For selfprotection, such as when jet fuel may flow beneath the vehicle, it is equipped with under truck nozzles that allow the operator to apply a foam blanket under the truck. Four extinguishing agents on board The PANTHER at FLL has 12,000 l of water, 1,500 l of foaming agent, and 250 kg each of extinguishing

OFFERING A FULL LINE OF TRAILERS TO SUIT YOUR NEEDS! IN STOCK

Let K-Line quote your next trailer! Call us Toll Free: 1-888-880-5544 #klinetrailers

www.klinetrailers.com

powder and extinguishing gas (Halotron) on board. Powder and either water or a water/foam mixture can be applied simultaneously via a twin-agent hose reel or the HVLA bumper turret. The extinguishing gas (Halotron) is either applied via its own rapid attack unit (including reel) or via the piercing tool located at the tip of the extinguishing arm. Optimal ease of use All of the PANTHER’s firefighting equipment can be controlled from the cabin. The displays and controls in the cockpit are ergonomically optimized and arranged so that they can be operated and viewed by both the driver and the front passenger. The extinguishing arms and the turrets are controlled by means of joysticks, which record the movements of the human hand very precisely and transmit them in an equally precise and targeted manner. Anniversary with history Rosenbauer has been building airport fire engines with several thousand liters of extinguishing agent and sophisticated high-performance firefighting technology on board since the 1950s. With the arrival of jumbo jets in the 1970s, the vehicles got even bigger, and with the PANTHER series, which came onto the market in the early 1990s, they became even more sophisticated, agile, and faster. Since 1998, Rosenbauer has been manufacturing the PANTHER at two locations; at the group headquarters in Austria, and at Rosenbauer Minnesota in Wyoming, MN. Around a

fifth of the total production volume is now in operation at airports across North America. PANTHER are currently based at Hartsfield-Jackson Atlanta International Airport, Los Angeles International Airport, Orlando International Airport, Houston Airport System, Halifax Stanfield and Toronto Pearson International Airports in Canada. The two major airports in the Miami, FL metropolitan region also depend on Rosenbauer and the PANTHER in particular. At Miami International Airport (45 million passengers in 2018), Miami Dade Fire Rescue operates an ARFF fleet of PANTHER. At Fort Lauderdale-Hollywood International Airport (FLL), where 36 million passengers visited in 2018, the Broward County Sheriff’s Department of Fire, Rescue and Emergency Services now uses three PANTHER 6x6 (all with HRET), including this anniversary vehicle. With over 350 daily departures, FLL is one of the fastest growing major airports in the United States. Consistent series The PANTHER series includes vehicles on 2-, 3-, and 4-axle chassis with permanent all-wheel drive, engine outputs between 700 and 1250 hp, and tank capacities of 6,000 to 19,000 liters. The flagship of Rosenbauer’s firefighting vehicles has conquered no less than 94 countries since its introduction, with the PANTHER thus far in service in the greatest numbers in Germany, the US, China, Japan, India, and Australia. b Source: Rosenbauer

March 2020

Supply Post · Our Readers Are Your Buyers

Page 53

1-855-998-0716 SALES • RENTALS • PARTS • SERVICE & REPAIRS • FINANCE & LEASING

2020 Stoughton 53’ Insulated Tridem Heater Van, HK-450 MAX Thermo King Installed, Slider Suspension, Laminated Oak Flooring, 18 Gauge Sidewall Scuff, Flush Rear Sill, Stk# 12707

$70,995

2020 Doepker Legacy Tridem Grain, 2,100 Cu. Ft. Capacity, TARE: 5,892Kg (12,989Lbs), Auto Lift Axle Management System & Wireless Electric Tarps! Stk #12405.................................................$85,995

2020 Stoughton Insulated Dry Van, Provisions for Reefer or Heater! Holland Slider Susp., Laminated Oak Floor, 18 Gauge Sidewall Scuff, Swing Doors, 1 Rod Lock Each. Stk #12717 .................................... $57,995

2020 Doepker Tridem Steel w/ Ramps, 5’ Beavertail w/ Spring Assist Flip Ramps, Load Cap. of 75,000lbs, Intraxx Susp., Premium Toolboxes, 255 70R22.5 BF Goodrich ST230 Load Range 8, Stk #12622 ...$61,995

2020 Doepker Super B Flat Deck, 60’ Length, 5 Axles, Aluminum Wheels, 11R22.5 Tires, Intraxx A/R Susp., GVWR: Lead 77,200lbs, Rear 77,200lbs, Stk# 12998................................................ $94,995

2019 Doepker Tridem Grain, 2,138 Cu. Ft. Capacity, TARE: 5,850Kg (12,900Lb), Auto Lift Axle Management System & 11R24.5, BF Goodrich ST230 Load Range H, Stk #12432....................................................$71,995

2020 Lazer Inox Stainless Steel Tridem TC407, 44,000L Capacity, 2 Compartments, Heated Belly, Mounted Cabinet Comes Fully Rigged w/ T&E Pump, Titan Gauges & Load Hose, Stk# 10728 ........ $224,995

RENT FROM US!

Our rental fleet has over two hundred units in service. We offer daily, weekly, and monthly rental purchase options available.

2020 Doepker Super B Grain, 2,990 Cu Ft. Capacity! TARE: 9480Kg (20,900 Lbs) GVWR: 70,000Kg (154,000Lbs). Tiremaax PRO Inflation System! Stk #12927.............................................. $123,995

2019 Doepker 4 Axle Logger, TARE Weight: 21,365 Lbs., 6 bunks, 12 Stakes, Painted w/PPG Dragon Hide HD Corrosion, Abrasion & Chip Resisitant Paint! Stk# 12784.............................................. $117,995

2019 Wolf Super B Aluminum TC407, 61,000L Cap., Dbl. Conical Design, 2-Comp. Lead; 1-Comp. Pup, Intraxx Susp., T&E Pump, Titan Gauges, Heat Tracing, Interior Coatings & More! Stk #12765 ........... $359,995

FOR FULL INVENTORY VISIT

WWW.EDMONTONTRAILER.COM

Page 54

Supply Post · supplypost.com

March 2020

LET’S GET IT $OLD! CLASSIFIED AD

49 ANNIVERSARY TH

SPECIAL

BE SEEN BY 35,000 PRINT READERS AND RECEIVE AN ONLINE LISTING AND GET THOUSANDS MORE VIEWS!!

5 LINES OF TEXT & PHOTO

$49 UP TO 12 LINES OF TEXT & PHOTO

$79 Call 1-800-663-4802 or visit SUPPLYPOST.COM/ADVERTISE/CLASSIFIEDS

March 2020

Supply Post · Our Readers Are Your Buyers

Page 55

PORSCHE

24 HR FINANCING AVAILABLE

0 0 8 5 Largest 7 ’s a d 0 a n 4-8 stern Ca g Dealer

4ailers.com 1q-ue8 reltr

We Trail Kin Etnyre &

! S S E N D A M G

MB R2J wwwia.kwa Rd., Winnipeg, 1585 N

3T3

SPRIN

ROPS D E L DOUB

12 14

AVAILAB

The 2020 Porsche 718 Boxster T And 718 Cayman T Debut In U.S. Particularly driverfocused versions of 718 Boxster and Cayman make their U.S. debut. Featuring a number of performance enhancing options as standard, the new 718 Boxster T and 718 Cayman T deliver even more unfiltered driving pleasure for enthusiasts. The 718 Boxster T and 718 Cayman T offer several performance-enhancing features that sharpen the handling even further. The PASM Sport Suspension (optional on 718 S and GTS models) is standard on 718 T models. It offers shorter springs, retuned adaptive dampers and a 0.78-inch lower ride height compared to the standard 718 Boxster and Cayman models. A mechanical limited slip differential, complemented by Porsche Torque Vectoring (PTV), optional on 718 and 718 S models, is also standard for the 718 T variants. Furthermore, the 718 Boxster T and Cayman T are

Your Truck & Trailer Connection, Since 1971

Cayman models, the 718 T variants are fitted with a standard Sport Exhaust System. Inside, special accents underscore the performance-focused layout of the cockpit. Sport Seats Plus with more pronounced bolsters and Sport Tex fabric are standard, while Full Bucket Seats, normally reserved for 718 GTS, GT4 and Spyder models, can be optionally ordered, as well as 18-way Adaptive Sport Seats Plus. Door opening loops in black replace the traditional door handles, and the headrests feature stitched “718” lettering in black. The interior trim on the dashboard trim and center console is highgloss black. 718 T models are also equipped with the GT Sport steering wheel as standard, which is fitted with a mode switch as part of the Sport Chrono Package. The optional 718 T Interior Package offers an extensive upgrade to the interior and features contrasting stitching in the available colors Guards Red, Racing Yellow, GT Silver and Lizard Green, including the door handles, armrest in center console, and stripes in the seat centers. The door opening loops, “718” lettering on the headrests and the seatbelts are also kept in the respective color. The 2020 718 Boxster T and 718 Cayman T are available to order now and are expected to reach U.S. dealers in summer 2020. The MSRP for the 718 Cayman T is $66,400, while the 718 Boxster T retails for $68,500 – both not including the $1,350 delivery, processing and handling fee. b

equipped with 20-inch 911 Carrera S wheels as standard, painted in a special Titanium Grey finish. Complementing the special wheel finish, the exterior mirror covers and the rear model designation are painted in Agate Grey, as are the supplemental roll over protection bars on the 718 Boxster T. The tips of the standard Sport Exhaust System are finished in high-gloss black, while “718 Boxster T” or “718 Cayman T” in Agate Grey lettering adorns the sides of the car. The 718 Boxster T and 718 Cayman T are powered by the same 2.0-liter turbocharged four-cylinder boxer-engine as the standard Boxster and Cayman models, developing 300 hp and 280 lb.-ft. of torque. The 718 T models are equipped with the Sport Chrono Package as standard. In conjunction with the optional PDK transmission and using the Launch Control feature, both variants can reach 60 mph from standstill in just 4.5 seconds. The standard transmission for the 718 T variants is the six-speed manual gearbox fitted with a short-throw gear lever, offering even crisper and more engaging shifts, similar to the one used in the 718 Cayman GT4 and 718 Spyder. Unique to the 718 T models: The shift pattern on the gear lever is embossed in red. Top track speed for all 718 T models is identical to the standard 718 Boxster and 718 Cayman models at 170 mph. Like all 718 Boxster and Source: Porsche

LE W DOUB E N D N A BR INUM W/ ALUM DROPS, READY TO GO! S PULLOUT

9’/10’ , 8’ 6” / T 5 5 , T 0 5 S IN LOWBED WIDE. 8 . OW STOCK N

DS LOWBE

9 12

P DEC E T S . LUM

A LE

AVAILAB

DECK LOADED ” 1 4 R O K 34” IN STOC HEIGHT. - ALL , TRIDEM M E D N A EL T UM./STE L A , L E E ST OW! , CALL N COMBOS

EC STEP D

LES

AX G N I L E TRAV

COME AND GET ‘EM

& G AXLES IN L E V A . (2) TR RAULIC TAIL (1) HYD TOCK. IN S E 8’ 6” WID & E ID 9’ W

OIL DI

ORS RIBUT

AVAILAB

NWORTH 2019 KE OIL T370 UTOR DISTRIB

Page 56

Supply Post · supplypost.com

Daimler Trucks Names New VP of Product Compliance and Regulatory Affairs Daimler Trucks North America LLC (DTNA) today announced that Sean Waters has been promoted to the newly-created role of vice president of product compliance and regulatory affairs. Waters most recently performed as the director of product compliance and regulatory affairs for DTNA.

In his new role, Waters will continue to work with regulatory agency leadership on standard-setting initiatives for commercial vehicles, including medium- and heavy-duty engine emission certification, vehicle greenhouse gas regulations and safety compliance. Waters will additionally oversee com-

pliance and regulations related to DTNA’s portfolio of export products. “Sean has a wealth of experience and understanding of the complex regulatory framework under which we operate. His enthusiasm and his commitment to DTNA’s vision have proven invaluable,” said Roger Nielsen, presi-

dent and CEO, Daimler Trucks North America. “His continued leadership will help drive us into a new era of mobility, further our environmental and safety initiatives and move our enterprise toward a more sustainable future.” Waters currently chairs the Truck and Engine Manufacturers Association, where he advises on scientific and technical aspects of programs related to commercial truck emissions control strategies and

1015 Great St. Prince George, BC V2N 2K8 Dwayne Renshaw 250-612-7512

Byron Roberts 250-640-9599

1015 Great Street, Prince George, BC, V2N 2K8

2019 FREIGHTLINER 122SD TANDEM, DD16 - 560/1850, RTLO-18918B, 20K FA, 46K RA, c/w NeuStar 16’6” gravel box, and 16’ tridem pup, air tarps, high lift gates

2020 K-LINE 55T LOWBED, Hydraulic detach neck w/ﬂip extension compatible with tandem and tri-drive trucks. 10’ wide, Honda power unit plus plumbed for wet kit, beavertail rear end, boomstand

2020 FREIGHTLINER 114SD TANDEM, DD13 - 450, Allison 4500RDS, 20K FA, 40K RA, c/w NRC 40000 lb. x 28’ roll back deck. Galvanized deck and subframe, 2 - 70” In The Ditch toolboxes, 25000 lb planetary winch w/remote, HD tow bar

2020 DOEPKER SUPER B FLAT DECKS, 32’ x 28’ x 8-1/2’, 36” KP on lead, 15” KP on pup, 11R24.5 tires, steel or aluminum wheels, one set with lift axles, 30 winches w/adjacent hooks, 2 - 55” premium toolboxes

2018 PETERBILT 579 TANDEM, MX13 - 510/1850, 18-speed Eaton Ultrashift, 13200 lb. FA, 40K RA, balance of 5 year/800,000 km extended warranty on engine, aftertreatment, and clutch.

2020 FREIGHTLINER M2 EXT CAB 4X4, ISL 350/1150, 3000RDS tranny, c/w Brutus 12’ steel and alum. service body, Cobra 11000 hyd. crane, Vanair RS85 hyd. compressor, hyd. stabilizers

MAHINDRA 6075, Fully enclosed cab, 71 HP, 61 PTO HP, loader lift capacity 3550 lbs @ 133”, 15 F and 15R speed power shuttle transmission, no DEF ﬂuid, 5 year powertrain warranty.

TRAILERS

1-800-595-4411

www.premiumtruck.ca

250-563-0696

March 2020 safety technologies. He also serves on the Advisory Board for the University of California Davis STEPS (Sustainable Transportation Energy Pathway) program and is a member of the Oregon Department of Transportation Task Force on Autonomous Vehicles. Waters is a 14-year veteran of DTNA and has served as director of compliance and regulatory affairs since 2011. Prior to that, he served as general corporate counsel beginning in 2006. Waters earned a J.D. from the University of Oregon School of Law in 2000.

About Daimler Trucks North America Daimler Trucks North America LLC, headquartered in Portland, Oregon, is the leading heavy-duty truck manufacturer in North America. Daimler Trucks North America produces and markets commercial vehicles under the Freightliner, Western Star and Thomas Built Buses nameplates. Daimler Trucks North America is a Daimler company, the world’s leading commercial vehicle manufacturer. b Source: Daimler

Volvo Buses Receives Order For 60 HighCapacity Electric Buses From Malmö Volvo Buses has signed yet another large order for electrified buses. Nobina has placed an order for 60 highcapacity electric buses which will enter service in Malmö next year. “It is immensely gratifying to receive yet another significant order for electric buses. In a short space of time we have taken orders for 220 electric buses from two of Sweden’s largest cities. This shows that electric buses are already a viable solution for cities that want public transport with long-term sustainability – buses that make concrete improvements to the environment. What is more, electromobility creates entirely new opportunities for urban planning and improves flexibility for cities that want to bring public transport closer to where people actually live and work,” says Håkan Agnevall, President of Volvo Buses. The electric highcapacity buses ordered by Nobina in Malmö are of the Volvo 7900 Electric Articulated model, which was launched in autumn 2019. They can carry up to 150 passengers and are 80 per cent more energy-efficient than corresponding diesel models. Their batteries can be quick-charged via OppChargeTM stations located on the bus route, or they can be

charged when the buses are parked in the depot. “We apply a system perspective and a holistic approach, with the focus on high reliability, efficiency and service level for passengers and bus operators alike. We have a clear-cut ambition to continue leading the development of electrified solutions for cities that want quiet and emissionfree public transport,” says Håkan Agnevall. “We are seeing a rapid change of public transport where the electric buses and technology are meeting the needs of society and passengers for efficient, comfortable and sustainable public transport. Volvo’s electric articulated buses and high battery capacity meet our needs and high demands for modern and sustainable bus traffic in Malmö”, says Henrik Dagnäs, MD at Nobina Sweden. Delivery of the 60 electric buses will start in January 2021 and all the buses will be delivered by April the same year. They will operate on route 5 and 7 in Malmö. The Volvo 7900 Electric Articulated is prepared to be able to run in restricted areas with particularly tough standards for noise, exhaust emissions and speed, for instance in zero-emission zones and indoor bus stops. b Source Volvo Bus Corp.

March 2020

Supply Post · Our Readers Are Your Buyers

Regulatory Sandbox On Electronic Shipping Documents For Dangerous Goods Project Transport Canada is launching a regulatory sandbox on electronic shipping documents. This project will allow them to test the use of electronic shipping documents for dangerous goods shipments in a safe way. As the transportation sector evolves, Transport Canada is looking at ways regulations can be updated to help keep Canada competitive and encourage innovation, while keeping Canadians safe. Transport Canada will use the sandbox to evaluate whether electronic shipping documents can help reach the same or a better level of safety as paper documents, and if so, under what conditions. The project will look at using electronic shipping documents across four modes of transportation: air, marine, rail, and road. They will also look at both rural and urban envi-

operational activities, training, equipment, and administrative activities. • Send Transport Canada your feedback throughout the two-year study. • Participate in emergency response simulations during the study (not everyone will be asked to participate) To apply, you will need to register an account in with an approvals application website and contact Transport Canada for an application form. If you have already applied for an equivalency cer-

tificate, you won’t need to re-register. If your application is approved, you will be issued an equivalency certificate that gives you permission to use electronic shipping documents from spring 2020 until spring 2022. Simulations and engagement activities will also take place during this time. Participating in this project is voluntary, so you will not be compensated for participating. b

ronments, including areas spectors, and CANUTEC with limited or no internet within five minutes or cell coverage. • Provide a point of conThe success of this tact who can provide project depends on stakeshipping document inholders participating and formation when the dancontributing. Transport gerous goods are being Canada is looking for transported shippers, carriers, first responders, enforcement Register with CANUTEC personnel, and other • For road vehicles, disSource: Transport Canada government agencies to play a sign advising participate in this proj#5-1340 Stevens Road, West Kelowna, BC V1Z 1G2 ect. How to participate You can participate by: • Applying for an equivalency certificate. • Submitting feedback or completing questionnaires • You can apply for an equivalency certificate if you are a Canadian consignor or carrier that transports dangerous goods in Canada, and you can: • Communicate shipping document information to first responders, in-

Peterbilt And Dana Announce Collaboration Peterbilt Motors Company and Dana today announced their collaboration on electric powertrain development for Peterbilt Model 220EV battery electric vehicles. The announcement was made in conjunction with CES that opened today in Las Vegas. Peterbilt will integrate Dana’s Spicer Electrified e-propulsion system into its 220EV chassis. The truck will also be equipped with two battery packs and an onboard charger. The 220EV features a range between 100 and 200 miles. Using the vehicle’s DC fast-charging system, the state-of-theart, high-energy density battery packs can recharge in about an hour, making the 220EV ideal for local pickup and delivery, as well as short regional haul operations. “Peterbilt continues to lead the charge by providing the industry’s largest lineup of electric vehicles. By using the

that electronic shipping documents are being used. These signs will be provided by Transport Canada and must be displayed on a driver’s door and at least two sides of the means of containment. • Send Transport Canada a report every six months that describes any incidents. • Give Transport Canada information related to your use of electronic shipping documents. This could include the impacts or benefits on

Page 57

Dana electric powertrain for the Model 220EV in the Medium Duty pickup and delivery market, we will be ready to meet the growing demand of our customers who want to incorporate zero-emissions vehicles into this application,” said Jason Skoog, PACCAR Vice President and Peterbilt General Manager. “We are pleased to collaborate with Peterbilt by providing the complete e-powertrain, including the integration, and upfit for the Model 220EV electric vehicle,” said Mark Wallace, president of Commercial Vehicle Drive Technologies for Dana. “Combining Peterbilt’s advanced technologies with our own expertise in delivering end-to-end turnkey electric systems, will result in highly-efficient solutions that will lead to low total cost of ownership.” b Source: Peterbilt

Sean Westerman 250-869-9415

Cody Fortin 250-869-9448

1015 Great Street, Prince George, BC, V2N 2K8

STK# 30197B

STK# 30149A

STK# 30198B

2012 FREIGHTLINER CASCADIA DD15, 13 Speed truck, 12 Front / 40 Rears, 232” Wheelbase, with great history on the truck is ready to go to work! P.O.R.

2013 FREIGHTLINER 122SD DD15, 13 Speed truck, 13.2 Front / 40 Rears, 244” Wheelbase, with great history on the truck is ready to go to work! P.O.R.

2020 FREIGHTLINER 122SD, Cummins X15, Eaton 18 Speed, 20 Front / 69 Rears, 268" WB. P.O.R.

STK# 30190A

STK# 301452A

STK# 30151A

2021 FREIGHTLINER NEW CASCADIA DETROIT DD15 - 505HP, DT-12 Transmission, 12.5 Front, 40 Rears, 3.23 Ratio. P.O.R.

2020 FREIGHTLINER BUSINESS CLASS M2-106, Cummins 6.7, Allison Trans., New 24’ Collins Box with Tuck Away Gate. P.O.R.

2020 FREIGHTLINER 122SD, 70" Mid Roof Sleeper, Detroit DD16 - 600 HP, Eaton Ultra shift, 13.3 Front / 40 Rears, 244" WB. P.O.R.

STK# 30150A

STK# 30065A

2020 FREIGHTLINER 122SD, c/w 34” Sleeper, Detroit DD16 - 600 HP, Eaton 18 Speed, 16 Front / 46 Rears, 244” WB. P.O.R.

2018 MITSUBISHI FUSO FE-180 with Knapheide Landscaper Body, c/w Scissor Hoist, Tow Hitch, Pull Tarp System. Inquire Today! P.O.R.

STK# 30127A

NEW FUSO FE160, Gas, 15,995 lb GVWR, New Collins 16' Box, V8 6.0L Gas Engine, Allison 1000 Transmission. P.O.R.

TRAILERS

250-769-7255 1-888-878-2511

www.premiumtruck.ca

@premiumtruckkelowna

Page 58

Supply Post · supplypost.com

March 2020

Delivers excellent maneuverability and travel performance on grade for mining, quarry, and aggregates - Komatsu America’s new HD785-8 rigid frame off-highway haul truck, with a Tier 4 Komatsu SAA12V140E-7 engine, has the highest in class net horsepower, 1,140 HP (849 kW) in North America. With a payload capacity of 101.6 U.S. (short) / 92.2 metric tons, it’s built for mining, quarry, and aggregates. “The HD785-8 has excellent travel performance on grade, and wet multiple disc brakes on all four wheels provide great downhill brake retarding performance,” said Robert Hussey, product marketing manager, Komatsu America. “The HD785-8 delivers fast acceleration out of the pit and the new cab keeps operators comfortable during long shifts, resulting in high production per hour.” With a tight turning ra-

dius of 33’ 2”, the HD7858 provides exceptional maneuverability when spotting to be loaded and positioning to dump. The Komatsu Traction Control System (KTCS) is standard on the HD785-8. KTCS automatically applies pressure to independent brake assemblies for optimum traction in various ground conditions, without the need for differential lockup, so steering performance is not compromised. KomVision all-around machine monitoring system provides the operator with a bird’s-eye view of the working area on a dedicated monitor in the dash (separate monitor from the rear-view monitoring system). The HD785-8 has a 7-speed, fully automatic transmission with two selectable reverse speeds. The Komatsu Advanced Transmission with Optimum Modulation Control

KOMATSU

Komatsu America’s New HD785-8 OffHighway Truck With High Horsepower System (K-ATOMiCS) ensures smooth clutch engagement for a comfortable ride and reduced material spillage. The Automatic Retard Speed Control (ARSC) automatically maintains a selected downhill travel speed (rather than engine RPM) to let operators keep their focus on the haul road. Other features include: • Standard diagonal access stairway provides easy access to cab and deck. • Additional ladders with gates and handrails on the right-hand and lefthand side provide secondary egress. • LED lighting package provides excellent visibility in various working conditions. • The Tier 4 Final after treatment solutions utilizes dual Komatsu Diesel Particulate Filters (KDPF) – most re-

generation is performed operator seat and up- Maintenance Features passively, with no action graded trainer seat pro- • Anchored tie off points (ISO 14567) around the required of the operator vide a comfortable ride. machine provide techniand no interference with • KOMTRAX Plus telematcians a location to attach machine operation. ics system and upgraded service lanyards. • No Selective Catalytic machine monitor provide arrangeReduction (SCR), therekey machine metrics for • Centralized ment of filters, grease fore Diesel Exhaust Fluid utilization, production points, and fast fuel fill (DEF) is not a required and machine health. coupler. consumable fluid. • Rear-view monitoring • Auto Idle Shutdown system located on a dedi- • Ground level battery isolator, starter isolator, and helps reduce unnecescated monitor in the upmachine immobilization sary idle time and lowers per right-hand corner of switch. operating cost. the cab. • Auto Idle Setting System • Ground level service center and jump start recepIn-Cab Enhancements/ (AISS) adjusts engine idle tacle. b Features speed based on coolant • New, air-suspension, temperature for reduced Source: Komatsu heated and ventilated machine warm-up time.

NEW LOCATION: 4600 Collier Place, Williams Lake, BC V2G 5E9

Eli Bergen: 250-267-8054

e.bergen@ premiumtruck.ca

Call for Pricing 2013 FREIGHTLINER 122SD TANDEM ISX15 - 550/1850, RLTO18918B, 14K front axle, 46K rear axle, 228” wheelbase.

Call for Pricing 2020 K-LINE 55T LOWBED, 10’ wide x 21-1/2’ well, hyd. neck compatible for tri-drive w/ﬂip ext, encl Honda power unit, beavertail rear end with boomstand, plumbed for booster…sold separately.

250-398-7411 | 1-877-878-2516

Call for Pricing MAHINDRA EMAX 22 22 hp, 3 cylinder diesel, 1320 lb 3 point hitch lift capacity, 900 lb. loader lift at 75", backhoe has 76" digging depth.

2019 FREIGHTLINER 122 SD QUAD LOGGER DD16 - 560/2050, RTLO-20918B, 20K FA, 69K RA, c/w Doepker , StrongArm 9’6” bunks, walking beam susp., Rigged and ready to work.

TRAILERS

www.premiumtruck.ca

BC Ferries Awards Contract For Additional Salish Class Vessel BC Ferries continues to roll out its Clean Futures Plan and has awarded Remontowa Shipbuilding S.A. of Gdansk, Poland a contract to build an additional liquefied natural gas (LNG)-fuelled vessel scheduled to go into service in the Southern Gulf Islands in 2022. This vessel will be identical to the three Salish Class vessels built by Remontowa for BC Ferries in 2016. “Our Clean Futures Plan is our path to replace diesel fuels with cleaner energy options. While this cannot be achieved in a single step, we are continually seeking energy sources that offer a cleaner, lower carbon-intensity option to displace non-renewable diesel,” said Captain Jamie Marshall, BC Ferries’ Vice President, Business Development & Innovation. “In our move towards a sustainable future, adopting LNG is one way to reduce our impact on the environ-

play area and a passenger lounge. The ship will have a number of key features that support BC Ferries’ goal to be efficient and environmentally responsible throughout its system. Highlights of the Salish Class vessels include: • The use of natural gas as the primary fuel that reduces GHG emissions by 15 to 25 per cent, reduces sulphur oxides by over 85 per cent, reduces nitrogen oxides by over 50 per cent and nearly eliminates particulate matter • Electric propulsion that eliminates gear boxes and shaft • Twin propellers that reduce cavitation • Hull designed for very small wake • Advanced hull coating that reduces flow disturbance and environmental leaching • Engine management system that reduces machinery running • Resilient engine mount that isolates structure borne noise. b

ment today. This new vessel will be our sixth ship fuelled by natural gas.” The agreement with Remontowa is a designbuild, fixed-priced contract that provides BC Ferries with substantial guarantees related to delivery dates, performance criteria, cost certainty and quality construction. The total project budget, which includes financing and project management costs, is approximately $92.3 million. The 107-metre Salish Class vessel will have the capacity to carry at least 138 vehicles and up to 600 passengers and crew. It will allow for the retirement of the Mayne Queen, a diesel-fuelled vessel. The ship will be powered by three Wartsila engines and electrically propelled by Schottel thrusters at each end, driven by an efficient gas-electric power plant. Onboard amenities include a Coastal Café, Passages retail store, children’s Source: BC Ferries

March 2020

Supply Post · Our Readers Are Your Buyers

Page 59

Renault Trucks is taking a critical step in the transformation of urban transport by announcing the signing of a contract with the Carlsberg Group to deliver 20 D Wide Z.E. These 100% electric 26-tonne trucks, which will be delivered in 2020, will be operated by the Feldschlösschen brewery, the Group’s Swiss subsidiary. Renault Trucks believes that urban transport needs to move towards electric

mobility quickly to improve quality of life in city centres and tackle global CO2 emissions. Renault Trucks is taking a decisive step in this direction and is announcing the signing of a contract with the Carlsberg Group to deliver 20 D Wide Z.E. to the Feldschlösschen brewery in Switzerland. Bruno Blin, president of Renault Trucks emphasises: “It is the first order of this scale in Europe. It

proves to our customers that the transport sector is undergoing a major transformation and reflects an industrial and commercial reality: our Renault Trucks electric trucks are rolling off the assembly line and will be on the roads of Europe in a few weeks’ time.” These 20 Renault Trucks D Wide Z.E. 26t will make daily delivery rounds of between 100 and 200 km to supply Feldschlösschen Swiss clients from the

Women In Trucking Association Announces Driver Ambassador Program The Women In Trucking Association (WIT) announced the launch of its Driver Ambassador program. The purpose of the program is to raise aware-

ness of the non-profit association’s mission, promote the career opportunities women have in trucking, celebrate their accomplishments, remove obstacles

female truck drivers face, and increase membership for the organization. Kellylynn McLaughlin, a professional over-the-road CMV Driver and Training

RENAULT TRUCKS

Renault Trucks Signs Historic Agreement With The Carlsberg Group

brewer’s 15 logistical sites in Switzerland. Feldschlösschen is committed to zero-emission logistics, partly through production sites being served Engineer for Schneider National, will be the official WIT Driver Ambassador. Debbie Sparks, vice president of WIT, will manage the program. “Trucking is an incredibly rewarding career, and there is so much opportunity, especially for women,” said McLaughlin. “As the Women In Trucking Driver Ambassador, it is my mission to effect change in this industry in a positive way for women and for men — for every driver.” In her role, McLaughlin will focus on spreading WIT’s message and giving visibility to the association’s efforts to bring more women into the industry by attending and speaking at non-industry trade shows, driving schools, associations, and other industry events. She will also share her stories of life on the road through a blog, provide media interviews, and give rides to legislators, regulators and the media. The next phase of the program will introduce a WITbranded trailer which will include a brand video promoting trucking as a viable career option for women and showcase success stories of women in the industry, in addition to other educational resources. “This program gives a voice to the women behind the wheel and the opportunity to share their stories of how they were called to drive,” said Sparks. “Amplifying their voices will allow us to further the WIT mission and attract more women to our great industry.” b Source: WIT

by railway lines. With a comprehensive range of electric trucks from 3.1 to 26 tonnes, Renault Trucks meets both current and future requirements of professionals operating in urban environments. These vehicles are ideally suited to waste collection and distribution operations,

enabling noiseless rounds at unconventional hours at the same time as preserving quality of life for local residents. Renault Trucks D and D Wide Z.E. are produced at the manufacturer’s plant in Blainville-sur-Orne (Calvados, France). b Source: Renault

Prince George

www.prolenc.com

877.563.8899

Intelligent By Design FRONT PAGE STORY: London, Ontario’s CH Excavating realizes improvements in productivity and cost savings with Komatsu’s Intelligent Machine Control system.

n 1983, CH Excavating was founded, starting with the excavation, backfill, and site grading of new home builds. Over 37 years later, the company is in its second generation of ownership, led by Peter V Chiacchia. Today CH Excavating is a fully integrated heavy civil company with over 80 employees, servicing all markets large and small; residential, commercial, institutional, municipal reconstruction and new home subdivisions. CH Excavating manages a wide variety of municipal projects and municipal roadworks including fullscale reconstructions (new services, surface works, and specialty works), road widenings, median replacement, beautification contracts, and much more. “Utilizing the Komatsu fleet has given our busi-

ness a significant competitive advantage due to their reliability, fuel efficiency & longevity,” said Peter Chiacchia, owner of CH Excavating. “At [the job] site, we are impressed with the operation of each Komatsu machine we have in our fleet ranging from the PC138USLC, PC290LC, PC360i, PC390i, PC450LC, PC490VG, PC650LC, even their PC800LC excavator, to their D39EX, D51i (4), and D61i Dozers,” said Chiacchia. The Komatsu fleet has directly benefitted CH in securing large scale development projects with their integrated GPS (Intelligent Machine Control; iMC) — a huge savings of man hours and rework, especially when working in new home development site servicing and commer-

cial land development. Intelligent Machine Control features a unique sensor package, including stroke sensing hydraulic cylinders, an IMU sensor, and GNSS antennas. This technology utilizes 3D design data loaded into the control box to accurately display machine position relative to target grade to limit over excavation. “Having recently expanded our fleet to include Komatsu’s industry-leading Intelligent line-up of dozers and excavators along with their smart reporting systems, has directly contributed to delivering a better result to our clients, efficiencies, profits, and business growth,” said Chiacchia. “These machines allow us to get on and off each job site faster, while getContinued on page 61

COURTESY CH EXCAVATING

CH Excavating owner Peter V. Chiacchia stands next to one his fleet’s Komatsu PC360 LCi excavator, featuring Intelligent Machine Control.

March 2020 COURTESY CH EXCAVATING

Supply Post · supplypost.com

CH Excavating’s Komatsu fleet ranges from the PC138USLC, PC290LC, PC360i, PC390i, PC450LC, PC490VG, PC650LC, even their PC800LC excavator, to their D39EX, D51i (4), and D61i Dozers.

COURTESY CH EXCAVATING

Page 60

Supply Post · Our Readers Are Your Buyers

Page 61

COURTESY CH EXCAVATING

March 2020

Continued from page 60

ting the work done more accurately. Improving the fleet’s utilization results in increased revenues. All Komatsu machines come with the strength and

quality we expect.” “We just wrapped up three large scale subdivisions in London,” explained Chiacchia. “Edgevalley (Owner: Drewlo Holdings) - located in north

east London, consisting of over 21,000 linear feet of pipe to service over 500 single & multifamily units & large storm water management pond; Creekview (Owner: Southside Group)

- located in Northwest London, consisting of 125 single family detached home lots; Silverleaf (Owner: York Developments) - an upscale executive neighbourhood in Southwest

London comprising 118 single family home lots as well as constructing arterial roads to access the neighbourhood,” continued Chiacchia. “Presently, we have a medium sized

commercial plaza in north central London, a 5-tower apartment complex in south west London, and new home development in Stratford.” “We can definitively state that with Komatsu along our side, CH Excavating is a recognized leader in our marketplace, delivering satisfaction to our customers and their clients alike. Whether it’s working in open fields for site development, tight city streets for reconstruction work, environmentally sensitive areas for storm water management pond development or rehabilitation or general excavation,” said Chiacchia. “What’s great about Komatsu and our local dealer, Equipment Sales & Service Ltd., is they care about our outcome and our client’s success,” said Chiacchia. “Every company is only as strong as the contribution of the sum of their parts. Everything from: Employees, Customers and Suppliers are critical links to success! Success breeds success, and we are grateful to have the Komatsu brand working alongside with us,” concluded Chiacchia. b

Discover. Compare. Shop. COME ON BOARD

SPOST21 truckworld.ca

April 16-18, 2020 International Centre 6900 Airport Road, Mississauga, ON

www.truckworld.ca Platinum Sponsor:

Endorsed by:

THE #1 TRUCKING EVENT IN CANADA • 500+ Exhibitors • Over 350,000 sq.ft. of Exhibit Halls • NEW Trucks, Trailers, Parts, Technologies... • 70+ Recruiters on the Show Floor Produced in partnership by:

Official Media:

TRUCK PHOTO ADS Book your ad online at: supplypost.com/advertise/classifieds or call 1-800-663-4802 today! PAGE 62 · MARCH 2020

WWW.SUPPLYPOST.COM

2019 RAM 3500 4X4 SERVICE BODY

2019 RAM 5500 4X4 SERVICE DECK

2019 RAM 5500 4X4 11 FT SERVICE BODY

2007 PETERBILT 357

8 M3 McNeilus boost-a-load drums., Cat C12 engines. Five to choose from. Approximately 16,000 hrs. Current CVI, work ready. $80,000.

IN PRODUCTION – COMING SOON 1525KM, 2019 Crew Cab Chassis, 6.7 Cummins Turbo Diesel, 6 Spd Aisin auto, 4X4, 9ft Mechanics Service Body, VMac G30 Rotary Gas Compressor, American Eagle 8 drawer tool chest. Fleet Price $110,569 + $698 Ad min Service,+ Taxes. Stk#19C35175. DL# 30541 .

1525 KM, 6.7 Cummins Turbo, 6 Spd Aisin, 4X4, 11’ WTW service body, 5000 Lb EHC5 Auto Crane w/pro. controller, VMac G30 Rotary Comp., Honda pwr, remotes, AE tool chest, b/u camera. Fleet Price $155,429 + $698 Admin Service + Taxes. Stk# 19R57037. DL#30541.

1525KM, 6.7 Cummins Turbo Diesel, 6 Spd Aisin auto, 4X4, 11' Wilcox Service Body, VMac VR70 U/H Comp., 5,000 LB Auto Crane EHC5 w/Nexstar cont., American Eagle 8 drawer tool chest, bolt bins & drawers both sides. Fleet Price $169,429 + $698 Admin Service + Taxes. Stk# 19R57036. DL# 30541.

NORTHLAND CHRYSLER DODGE JEEP RAM

Call Murray 1-888-457-6908 www.northlanddodge.ca

2018 DECAP 40' CLAM DUMP TRAILER

Call Murray 1-888-457-6908 www.northlanddodge.ca

2000 GERRYS S/STEER BOOSTER

1989 ARNES S/STEER BOOSTER

CALL HUGH

604-657-7167 2007 INTERNATIONAL 9900i

2018 Decap 40’ Clam Dump Trailer Tridrive Tridem. Hauls 35 Tonne. Electric Tarp, Push Block, Clean Outs, Dual Air Tanks, Disc Brakes, Aluminium Wheels FST819 Tires. Special Ordered, $56,000. Kamloops, BC

2000 Gerrys booster, 8 bag, tandem 275/70/22.5, pin on adapt, flat back $9,000. Wetaskiwin AB.

1989 Arnes S/Steer booster, Tandem 11/22.5, 2 big bag, W/B Susp, Ex Cond. CVIP. $7,000. Wetaskiwin AB.

C15 550 18 speed 391 gears 4 wheel lock 46rears on hendrickson air ride and wetline. CALL FOR $$

HAR VER B ENT. INC

CALL

CALL JEFF

harverb@telus.net · (250) 319-8438

PHONE: (780) 362-0874

(519) 580-6480

2015 MACK CHU614 505 HP

2019 WESTERN STAR HI-RAIL GRAPPLE TRUCK

2005 CAT 777D

2015 MACK CHU614 505 HP, 18 SPD, PTO, Pump, Herd Bumper, New Steer Tires, Engine, Bunk Heaters, Shore Power Converter, Belly Dump Wiring $84,000. Kamloops, BC

2019 Western Star Hi-Rail grapple truck w/magnet, 20,000 lb front, 46,000 rear, 470HP DD13 12.8L, RTO-16908LL trans., 270” WB, advanced remote drive system, single 80 gal fuel tank. Air-ride drivers seat, 22’6” long by 102” wide flatbed body.

SN: AGC02262, 29,000 frame hrs., 10,000 hrs. on Caterpillar Reman engine & torque. Flat floor body. Transport ready with box and outer tires removed. Asking $325,000 CAD

2005 T800 KW, C15 550 18spd 410 gears 14.6frt, Super 40rears on 8bag air ride and wetline. CALL FOR $$

PHONE: (705) 566-1294

BRIKERS

sales@brikers.com · 855-285-1115

CALL JEFF

HAR VER B ENT. INC

harverb@telus.net · (250) 319-8438

CALL

2005 KENWORTH T800

(519) 580-6480

March 2020

Supply Post · Our Readers Are Your Buyers

Page 63

SEARCHING FOR PARTS?

The Completely Searchable Supply Post Parts Database Is Here!

WWW.SUPPLYPOST.COM/parts Truck Parts, Equipment Parts, And More Search By Part # Search By Keyword Locate That Part You Need Before You Pick Up The Phone!

Page 64

Supply Post · supplypost.com

March 2020

OCEAN TRAILER IS WESTERN CANADA’S TRAILER SPECIALIST. SPECIAL PEOPLE CREATING EXCEPTIONAL PLACES.

REEFERS IN STOCK! 36 month Long Term Rental

36 month Long Term Rental

$1,350

$1,450

Canadian per month for a 53' Tandem Axle OAC

Canadian per month for a 53' Tridem Axle OAC

SUPER B FLATS CALL FOR GREAT PRICING!

Wilson Quad Flats

Titan Super B Walking Floor Chip Hauler

Tridem Step Deck Tautliner

Fontaine All Aluminum Flat

Super B Grain

Delta (800) 891-8858

Nanaimo (877) 878-5979

Wilson Tridem Step Deck *IN STOCK NOW*

Prince Rupert (250) 627-1981

Edmonton (800) 610-1019

Tridem Combo Chassis - In Stock

Neustar Demo Box

New All Steel Tridem, Flats & Steps.

Calgary (877) 720-7171

WWW.OCEANTRAILER.COM

Winnipeg (866) 397-5524

10807 - 209 Street, Edmonton, AB T5S 1Z7

1-800-663-0715 • 780-452-7021 Fax: 780-453-1477

47 Forest Plain Road, Oro-Medonte, ON L3V 0R4

1-866-404-5233 • 705-325-2777 Fax: 705-325-9777

www.jadeequipment.com | info@jadeequipment.com

PARTS SALES SERVICE RENTALS MACHINES FOR SALE

ENGINES FOR SALE

2015 JOHN DEERE 180GLC 2,100 hrs., 32” shoes, air sus seat, heated, 1 PC boom w/arm cyl & thumb, arm 10’6” rev fan, hyd. thumb, digging bucket, clean up bucket $164,500 OBO.

JD608IH & 6090H CUMMINS ALSO AVAILABLE

2007 VOLVO G970 diesel engine (210 250 HP) VOLVO HTE1160 transmission, Low profile cab c/w air conditioning, 14’ moldboard, accumulators, float valves, 20.5x25 tires, 5,700 hours.

FINAL DRIVE FOR SALE

CALL FOR PRICING!

PARTS AVAILABLE Wear parts, gaskets, axles, brakes, cylinders, hydraulics available. Call us for parts for Deere, Champion, Volvo, JCB, Komatsu and more.

JD RM100072RX FINAL DRIVE CALL FOR DETAILS

REBUILT TRANSMISSIONS FOR SALE CHAMPION, VOLVO HTE1160, JD DF180 AND DF230 Transmission overhaul kits for sale and in stock.

VOLVO FINAL DRIVE EXCHANGE

Celebrating 32 Years! 1988-2020