Supply Post East September 2018

CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER · SUPPLYPOST.COM

Family Owned Since 1971

CENTRAL/EASTERN CANADA EDITION Advertiser’s

Index

4

|

2008 JOHN DEERE 350 DLC

Classifieds

13

|

Front

Page

Story

14

Scan for more info

VOL. 11 · NO. 9 · SEPTEMBER 2018 |

Publications

Mail

Agreement

#40070144

NEW DESITE SLG 78VFRB

2013 TEREX PT80 TRACK LOADER

JAW CRUSHER

Rebuilt pumps, 2 buckets, 10,000 hrs. $68,000. See more on page 13.

Portable Vibratory Screener Topsoil / Gravel / Sand 15 to 30 yards per hour. $8,600. CDN. See more on page 13.

Compact rubber track loader, 18” rubber tracks, 78" bucket, 836 Hrs, $52,900. See ad on page 13.

443 Cedarapids Kolman Screener Stackers and Generator with switch gear…$125,000 See more on page 13.

TRANSPORT CAMILLE DIONNE 450-664-3322 · rredmond@tcdionne.com

877-254-7903 www.idmcabc.com

DELTA POWER EQUIPMENT SALES@DELTAPOWER.CA · 1-888-903-8772

OSCAR’S GRAVEL PRODUCTS · 807-475-5347 mikelehto429@hotmail.com

New W170 Windrower Targets Canola Growers

PHOTO CREDIT JOHN DEERE

New John Deere W170 Windrower makes swathing faster and easier in heavy crop and hilly conditions.

Read more on page 14

NEW AUTHORIZED

ONTARIO DEALERSHIP

WWW.DELTAPOWER.CA

Page 2

Supply Post Central/Eastern Canada Edition · supplypost.com

September 2018

682 Okanagan Ave. E., Penticton, BC, Canada

1-866-344-6480

cturchak@brutusbodies.com

YOUR TRUCK BODY BUILDING SPECIALISTS BRUTUS BOXES

SLIP-IN BODIES

FLAT DECKS

TIRE BODIES

RV BODIES

VAN CONVERSIONS

HI-RAIL TRUCKS

LUBRICATION SKIDS

CRANE TRUCKS

ELECTRICAL UTILITY BODIES

AERIALS

FIRE AND RESCUE BODIES

WELDING BODIES

WORKSHOP BODIES

SERVICE BODIES

SERVICE DECKS

www.brutusbodies.com

September 2018

Supply Post Central/Eastern Canada Edition · Our Readers Are Your Buyers

Page 3

1-844-807-5800

www.quereltrailers.com Western Canada’s Largest Etnyre & Trail King Dealer

1585 Niakwa Rd., Winnipeg, MB R2J 3T3

ORDER NOW

FOR EARLY 2019 DELIVERY!

(1) 2018 TRAIL KING TK110 available in 9’ wide, 25’ clear deck length, hyd, detach, Hendrickson air ride, 60” spread, Honda power pack, 4th axle ready.

S.jeep & booster ready.

(2) NEW 2018 TRAIL KING TK80 MG TRIAXLE LOWBED mech detach, 28.5 well, air ride, air lift center axle, 60” spread, alum. pullouts, mini boom well, alum. front & rear decks, 22.5 tires, alum. wheels, wide load lights.19,500# tare weight.

ON ORDER FOR JUNE DELIVERY

IN STOCK

NEW 2018 ETNYRE BLACKHAWK 55 TON TRIAXLE LOWBED 53’x102”, 25’ clear deck length, hyd detach, Hendrickson air ride, 60” spread, outriggers, 22.5 tires, steel wheels, wide load & strobe lights, Honda power pack, set up for single axle jeep & booster. 1 AVAILABLE

2019 TRAIL KING TK80 HYDRAULIC SLIDING TAIL, 8'6" wide up to 10' available — get your orders in now for May & June 2019 deliveries.

IN STOCK

2017 ETNYRE BLACKHAWK LIMITED EDITION, 50 Ton, 9’ wide. 50 Tons in an 16’ of deck, or 55 Tons evenly distributed. 84 swing radius, 25.5 70R or 22.5 Tires, 8.25 x 22.5 steel unimount rims, air ride suspension with 60 axle spread.

Too much more to list, call for pricing and more info.

EARLY FALL DELIVERY!

2018 TRAIL KING All Aluminum Triaxle Step Decks, 53’ x 102”, 34” or 40” Deck Heights, Tire Inflation, Fully Loaded $1,320/Mo. For 60 Mo., $0 Down $0 Buyout

2018 TRAIL KING TRIPLE AXLE 53’ TRAVELLING AXLE RECOVERY TRAILERS with 255 70R 22.5 tires, PSI tire inflation systems, 30k hyd winch, wireless remote and wide load lights. ON ORDER FOR SEPTEMBER.

2011 CANUCK TANDEM END DUMP 28’ X 102”, Hendrickson HT300 air ride, AR200 floor, 22.5 tires PRICED TO SELL — PLEASE CALL

2009 LOAD LIFTER QUAD AXLE DROP DECK CAMP EQUIPMENT TRAILER, 51'x102", ext. deck to 60', 41' main deck w/10' gooseneck, spring ride susp., 215/75R17.5 low pro tires, duals, 43 axle spread, 80,000# GVWR.

2005 ENTYRE 41' X 102" TANDEM BELT TRAILER, spring ride, 40 belt, hardox int., insulated ext., air operated rear door, operates very good. $22,900

2005 SATURN TANDEM ROLLER PAVER TRAILER, air tilt, air brakes, 10,900# GVWR.

NEW 2018 CANUCK CLOSE UNDER LOAD TRIAXLE BELLY DUMP 102” wide, Hendrickson HT300 air ride, 60” spread, 14,500 lbs. tare weight, steepest slope & most powerful linkage gate control in the industry.

IN STOCK • ALSO AVAIL FOR RENT

Page 4

Supply Post Central/Eastern Canada Edition · supplypost.com

QUALITY EQUIPMENT FOR SALE

Case IH Expands With 2130 Stack-Fold Planter

lesequipementstcd.com Contact Robert • 514-942-1886 • rredmond@tcdionne.com

2014 John Deere 50G excavator with 445 hrs. $76,000.

2003 Western Star plow truck $35,000.

2012 Cat D6T XL dozer with 10,380 hrs, major rebuild by Cat. $245,000.

2017 Cat 323FL excavator with 423 hrs. $277,000.

September 2018

New, convenient bulkfill and fertilizer system options provide accurate, high-speed planting.

Case IH is expanding the 2000 series Early Riser® planter lineup with a new 2130 stack-fold mounted 3-point hitch model. Available in five configurations, this new planter is rebuilt from the ground up, from the rugged row unit to Precision Planting® technology, and includes new features that enhance productivity for high-tech strip-till and flood irrigation operations and for specialty crops, such as cotton, peanuts and dry edible beans. Available models include 12-row 30-, 36-, 38- or 40-inch row spacing configurations and 16-row 30-inch row spacing configurations.

“We’re excited that this new planter provides high speed, high specs and high tech — all available straight from the factory,” said Tony McClelland, Case IH planter marketing manager. “This is also a great new option for growers in specialty applications, now offering them the same specs and features corn and soybean growers love in the 2000 series lineup.”

Efficiently cover acres with accuracy at speed Convenience is key with the new 2130 Early Riser planter. For the first time, these stack-fold models will be available with a bulk-fill tank option, factory-fit liquid fertilizer system and wing downforce. Thanks to these options paired with the rugged new row unit, producers now have access to a highspeed planter for many terrains and crop types.

While the 2130 planter also comes factory-available with on-row hoppers, the new bulk-fill tank option brings increased seed

capacity and reliable seed delivery for more efficiency with each pass. The bulkfill tank option allows producers to save up to 50 percent of the time it takes to tender seed with onrow hoppers while tendering more effectively with one man instead of two.

The tank also provides 2.2 times more seed capacity on a 12-row planter and 1.6 times more seed capacity on a 16-row planter when compared with on-row hoppers.

“This planter delivers on efficiency for producers looking to hit tight planting windows,” McClelland said. “Like the others in the 2000 series lineup, it’s the perfect combination of speed, durability, accuracy and convenience to get the job done quickly and get it done right.”

A new factory-available liquid fertilizer system delivers accurate application from aftermarket tanks mounted to the sides or front of the tractor. Growers can save trips across the field by applying starter fertilizer in-furrow. The fertilizer system is available from the factory on the 2130 planter, including all Continued on page 5

ADVERTISERS INDEX 2012 Cat 924K loader 2012 with 901 hrs, snow plus tires. $155,000.

2008 John DEERE 350 DLC with10,000 hrs. $68,000.

Brandt................................ 9

Frontline Machinery .......... 10

Magnum Attachments....... 10

River Valley Contractors ...... 5

Brandt Value Parts........5, 13

General Aggregate Equip. ... 6

Nat’l Heavy Eq. Show ....... 12

Shaw Bros........................ 12

Brutus Truck Bodies ............ 2

International Machinery ...... 8

COFS ............................... 15

Kubota ............................... 7

Nor Mar Industries .............. 2

Trans East Trailers .............. 1

Darby Mfg. ......................... 8

Langley Excavtor Parts ........ 7

Querel Trailers .................... 3

Transport Camille Dionne .... 4

FLO Components .............. 11

LSW Wear Parts .................. 6

Ritchie Bros...................... 11

TRK Attachments .............. 15

NEXT DEADLINE: Friday, September 21, 2018 Scan for more info

2012 Cat D6K XL with 1,350 hrs. $180,000.

1984 Vohl DV1104-400 snow blower, work ready. $24,000.

#105, 26730 - 56th Avenue, Langley, B.C. V4W 3X5

www.supplypost.com

PHONE (604) 607-5577 | TOLL FREE 1-800-663-4802

1987 International water truck. $13,000.

2014 John Deere 3046R tractor with 500 hrs, ready for snow removal. $62,500.

Sales Manager ................................... Jeff Watson Regional Account Manager .............Jake Peterson Regional Account Manager ...........Shantal Horner Managing Partner, Finance ............ Debra Watson

Editorial/Production Assistant ........... Sheryl Kaye Art Director ......................................... Linda Horn Graphic Designer .............................Lisa Schmale Graphic Designer ....................... Carol Van Muyen

CIRCULATION

Published Monthly - Printed in Canada Publications Mail Agreement No. 40070144

Monthly Copies .................. 13,000+

Reproduction of any material including photographs and/or advertisements in whole or in part is forbidden.

Please call our office for full details

The Supply Post is a proud member of the following Trade Associations:

2007 New Holland TS115A tractor with 2,528 hrs, ready for snow. $55,000.

2008 JohnDeere 244J loader with 4,350 hrs. $52,000.

INTERIOR LOGGING ASSOCIATION

RETURN UNDELIVERABLE CANADIAN ADDRESSES TO CIRCULATION DEPT.: (Covers/Labels Only) No. 105, 26730 - 56th Avenue, Langley, BC V4W 3X5

September 2018 Continued from page 4

toolbar and row unit distribution to the furrow, and a three-section control system with optional row-byrow shut-offs, controlled by the Advanced Farming Systems (AFS) Pro 700.

Find the perfect fit for specialty operations Engineered to be a highspeed planter, the 2130 Early Riser can be customized from the factory for specialty operations, including: • Irrigation — The stackfold configuration brings row units close to the tractor, so an operator can easily maneuver and plant as close as possible to an irrigation ditch or pipe.

• Strip-till — The mounted design eliminates draft so the planter follows the tractor and, in turn, more precisely follows guidance lines.

• Wide rows — 30-, 36-, 38- and 40-inch row configurations offer options for wide rows of specialty crops.

• Multiple crop types — An improved metering system gently handles each seed, providing reliable seed delivery for

Supply Post Central/Eastern Canada Edition · Our Readers Are Your Buyers a variety of crops, including cotton, peanuts, soybeans and edible dry beans.

“This planter brings the proven benefits of Precision Planting technology and the design of the 2000 series Early Riser planters and opens it up to specialty crop types,” McClelland said. “These customizable features aren’t just for the major crops. Now growers of many crop types and farming practices have access to the 2000 series to customize their dream planter.”

Stack-and-go portability The heavy-duty toolbar on the 2130 planter provides a solid frame for a smooth, durable stack-fold system. During planting, weight is evenly distributed across the tractor, maximizing flotation and minimizing compaction.

Optional lift-assist wheels are available for added support, and a gullwing option provides additional wing lift when the planter is raised, for more clearance on headland turns.

The stacker folding system performs fast, convenient stacking, so operators can get in and out of the field

quickly and efficiently.

“At the heart of the 2000 series lineup is the Early Riser row unit with agronomically designed ground-engaging components,” McClelland said.

“This row unit delivers

more accurate seed placement and consistent seed depth for fast, uniform emergence.”

The 2130 planter is the latest addition to the 2000 series lineup, complementing the existing 1235 stack-

Page 5

fold planter model. The 2000 series portfolio also includes the 2140 Early Riser pivottransport planter, available in 15-, 20- or 22-inch configurations; the 2150 Early Riser front-fold planter, available in 12-, 16- or 24-row

30-inch configurations; and the 2160 Early Riser large front-fold planter, available in 32-row 30-inch or 36-row 20-, 22- or 30-inch configurations. b Source: Case IH

Value Parts is your number one choice in North America for quality new, used and rebuilt industrial equipment parts. We specialize in John Deere, Timberjack and Hitachi, but also have access to parts inventories for Caterpillar, Bomag, Ditch Witch and many more makes.

DISASSEMBLING FOR RESALE

PARTS AVAILABLE JOHN DEERE 450LC 350D LC 330C LC 330LC 240D LC 270D LC 270LC 230LC 200C LC 200LC

2054 892E 690E 744J 744H 724J 644G 544H 544G TC44H

TC54H 344J 848G 748G-III 748G-II 748G 648G 310SG 310SE 310D 772CH

770CH 772BH 770BH 750C-II HITACHI EX200LC-5 EX270LC-5 EX330LC-5 ZX450LC-3

Deere 350G LC Excavator s/n 1FF350GX808730+. Cab, Final Drives, Swing Drive, Engine, Boom, Arm, Cylinders, Bucket Linkage and tin work are all in excellent condition.

E-mail: usedparts@brandt.ca Inventory: brandt.ca/ValueParts eBay Store: valueparts.ca

For more information call:

1-877-685-4886

RIVER VALLEY CONTRACTORS RETIREMENT SALE 1-844-288-9337 | info@RiverValleyContractors.com

WHEEL LOADERS:

EXCAVATORS:

2012 Caterpillar 950K, 812 Hrs ..................................................................$255,000 2008 Komatsu WA380, 8,125 Hrs ...............................................................$110,000 2010 Komatsu WA380, 12,480 Hrs ...............................................................$90,000 2011 Caterpillar 950H, 8,319 Hrs ...............................................................$150,000 Volvo 120B, 2,535 Hrs. since rebuild ............................................................$45,000

TRUCKS & DUMP TRAILERS: (3) 2015 Kenworth T800 Tractor ...........................................................$150,000 ea.

(3) 2013-2015 Doepker Impact End Dump w/ Liners ...................$65,000-$70,000 ea.

(2) 2014-2015 Kenworth T800 Dump Box ................................. $140,000-150,000 ea.

(4) 2014 Loadline Pups ......................................................................... $35,000 ea.

2004 K-Line 55 Ton Lowbed Trailer, 10’ wide ................................................$55,000 2011 Castleton Crossclam Dump Trailer .......................................................$48,000 2007 Peerless Jeep Trailer ...........................................................................$35,000

2011 Caterpillar 950H, 8,319 Hrs. $150,000

(3) 2015 Kenworth T800 Tractor. $150,000 ea.

2013 Caterpillar 336EL, 3,739 Hrs ..............................................................$295,000 2012 Caterpillar 324EL, 3,918 Hrs ..............................................................$235,000 2014 Caterpillar 324EL, 2,783 Hrs ..............................................................$260,000

DOZERS: 2013 Caterpillar D6N LGP, 3,752 Hrs ..........................................................$270,000 2013 Caterpillar D5K2 LGP, 1,817 Hrs .........................................................$160,000

MISCELLANEOUS: Heavy Duty Sheepsfoot Pull Packer w/ 60” Drums ........................................$20,000 Tenco TDC-10-AS Slide-in Rear Discharge Sander ...........................................$15,000 Tenco TDC-10-AS Slide-in Rear Discharge Sander ...........................................$18,000 Henderson Slide-in Sander, Good Condition .................................................$12,000 2014 Ford F-350 XLT Super Duty, c/w 450L fuel tank/toolbox combo ..............$31,000 2015 Meridian 10,000L Fuel Tank ................................................................$10,500 Pit Scale 100 Ton 80’x11’, c/w 8’x12’ Shack, Dig. Readout & Printer ................$65,000 100 Ton Scale 80’x11’, c/w 8’x10’ Mobile Mini Shack, Dig. Readout & Printer...$45,000

2011 Castleton Crossclam Dump Trailer. $48,000

2013 Caterpillar 336EL, 3,739 Hrs. $295,000

2013 Caterpillar D6N LGP, 3,752 Hrs. $270,000

Page 6

Supply Post Central/Eastern Canada Edition · supplypost.com

September 2018

Michelin And Camso Join Forces

ESCO AND LSW – A Winning Combination lswwearparts.com

Fredericton, NB 506-458-5613

Truro, NS 902-895-4913

Michelin and Camso join forces to create the leader in off-the-road (OTR) mobility solutions.

The result of a genuine strategic partnership in the OTR segment, the new division will be managed from Quebec, Canada.

Michelin and Camso today reached an agreement whereby Michelin will acquire Camso, headquartered in Magog, Quebec, Canada, and whereby the two companies’ off-theroad (OTR) operations will be combined to form a new division to be managed from Quebec. Led by a set of common values and a strong tradition of innovation and R&D at both Michelin and Camso, and backed by high-quality teams, the strategic partnership makes the newly created entity the world leader in OTR mobility.

Reporting net sales of US$1 billion, Camso has been designing, manufacturing and marketing OTR mobility solutions since

1982. Camso is a market leader in rubber tracks for farm equipment and snowmobiles, and in solid and bias tires for material handling equipment. It also ranks among the top three players in the construction market, in track and tire solutions for small heavy equipment. Leveraging its technological leadership in tracks and related systems, its competitive manufacturing footprint, particularly in Sri Lanka, and strong customer awareness of its Camso and Solideal brands, Camso has demonstrated its ability to grow rapidly, expanding at an average pace of 7% per year since 2012.

By joining forces with Camso, Michelin will create the world’s number one OTR market player, headquartered in Quebec. The business will benefit from the expertise of Camso’s management team and Michelin’s long-standing presence in Canada, both in Continued on page 7

www.genagg.ca

Have Aggregate Needs?

We’ve Got You Covered.

September 2018

Supply Post Central/Eastern Canada Edition · Our Readers Are Your Buyers

Continued from page 6

Laval, Quebec and in Nova Scotia. As world leader, the new entity will represent more than double the net sales of Camso, supported by 26 plants and approximately 12,000 employees and will benefit from sustainably dynamic markets.

Thanks to the complementary positioning of the two companies’ product and service offerings, the transaction is expected to deliver the following benefits: In the agricultural market, the creation of a unique player providing its customers with a comprehensive range of premium radial tires and tracks.

In the construction market, Camso will reinforce Michelin’s offering with its bias tires and tracks offers.

In the material handling equipment market, Michelin will leverage Camso’s renowned Solideal and Camso brands to become the market leader in solid tires.

The deployment of the new entity’s offer will be accelerated by the complementarity of both Michelin and Camso’s distribution networks.

Cooperation between

Camso and Michelin researchers will bolster the Group’s innovation capacity in tracks and airless tires. Cross-fertilization of R&D expertise will enable the teams to consolidate the Group’s position as a global technological leader in support of sustainable mobility, as Michelin’s headway in terms of longlasting performance of tires is a differentiating factor and a key strength for reducing its environmental footprint. In addition, Michelin’s technological breakthroughs in reducing soil compaction while maintaining superior traction, for example, will contribute to the products that Camso develops.

A strong manufacturing presence of Camso in emerging markets, particularly in Sri Lanka and Vietnam.

Jean-Dominique Senard, Chief Executive Officer of the Michelin group, said: “Michelin and Camso have many values in common. This acquisition is a wonderful mutual opportunity. Michelin will benefit from all of Camso’s skills in the off-the-road mobility markets and Camso from

the full range of Michelin’s expertise in the specialty markets.”

“Joining up with Michelin’s off-the-road teams is a fantastic opportunity for Camso because of the similarity of our cultures as well as our growth potential,” said Pierre Marcouiller, Executive Chairman of Camso.

Through studies and discussions with Camso, Michelin has identified significant opportunities to increase sales and reduce costs, thereby unlocking up to US$55 million in syner-

gies by 2021. After obtaining the customary approvals, Michelin will acquire Camso for US$1.45 billion, corresponding to an enterprise value of US$1.7 billion, i.e., a multiple of 8.3 times EBITDA after synergies. The transaction will not impact the Group’s robust financial position.

As part of the transaction, Michelin has made the following commitments: The OTR division’s decision-making center will be based at Camso’s headquarters in Magog. The

Page 7

management teams, including the top executive, will work out of the Magog office.

Headcount at Camso headquarters (300 employees, of which 100 in R&D) will remain stable, and existing R&D operations and production jobs in Quebec will be maintained.

The new skill sets required to oversee this global business, and the anticipated growth in the division’s net sales, will lead to the creation of new high-quality jobs in the Magog region in the com-

ing years.

With this transaction, the Michelin Group is confirming its strategic commitment to expanding in the tires and services domains while rolling out its strategy in materials and distribution. Michelin also indicates that, following a thorough analysis, the synergies expected to result from the Fenner acquisition have been revised upward, to £60 million from the initially announced £30 million. b Source: Michelin

TOUGH SEASON AHEAD? WE WOULDN’T HAVE IT ANY OTHER WAY. Exceptional comfort and an easy to maintain Kubota Tier IV Diesel engine combine for an impressive piece of equipment in Kubota’s SSV Series. New side lights expand the operator’s visibility on the job site, and the roll up door and wide operator area make for a more alert and productive work environment during those long all-day jobs. But best of all, our SSV Series are easy to maintain, so you can focus on your job site, not on your equipment.

5425 Production Blvd., Surrey, BC, V3S 8P6

Phone 604.530.5758 Fax 604.530.3554

Toll Free 1.888.530.5444 Focused on Parts for John Deere & Hitachi Late Model Excavators

Now Wrecking: John Deere 470GLC · Components · Cylinders · Cabs

· Engines · Undercarriage · Booms

· Sticks · Linkage

kubota.ca |

Now Wrecking: Hitachi ZX270LC www.langleyexcavator.com parts@langleyexcavator.com

*See your dealer for details.

Page 8

Supply Post Central/Eastern Canada Edition · supplypost.com

FINANCING AVAILABLE 1-844-460-9954 | Maple Ridge, BC

2012 KW C500, Low Miles, Low Hours, 550 Cummins, 18 Spd, 20 FA, 60 RA, 70 Ton Winch W/Full Tail Roll, Premium Unit $159,500.

2014 KW T800, 550 ISX, 18 Spd, 20 X 69 Axles, Ext Day Cab, 338K Miles, Loaded $122,500.

2014 KW T800, 550 ISX, 18 Spd, 20 X 69 Axles, 1/2” Frame, 276K Miles, Ext Daycab, Loaded $127,500.

2016 KW W900, 550 ISX, 18 Spd, 20 X 69 Axles, 63” Bunk, 249K Miles, Loaded. $157,500.

1994 KW W900, 3306 CAT, 9LL Trans., 10.5 Yard Boost a Load, Clean Unit. $39,500.

2015 PETE 367, 550 ISX, 18 Spd, 20 X 69 Axles, 254K Miles, Loaded. $134,500.

CUSTOMIZE

RUST

REPAIR

A WIDE SELECTION OF HEAVY SPEC KENWORTH, PETERBILT, WESTERN STAR TRUCKS AND MORE, OR IF YOU WANT A TRUCK CUSTOMIZED TO YOUR SPECIFICATIONS , WE OFFER ALL OF THESE SERVICES. CALL TODAY! 1-844-460-9954 TUNE-UP

POLISHING

2015 PETE 367, 550 ISX, 18 Spd, 20 X 69 Axles, Double Frame, 263K Miles, Loaded $134,500.

2013 PETE 367, 550 ISX, 18 Spd, 20 X 69 Axles, 36” Bunk, 280K Miles, Loaded $114,500.

ADD-ONS

September 2018

Challenges & Benefits Of Using GNSS-Based 3D Machine Control The global construction sector is one of the world’s largest manufacturing industries. However, it is also one of the least automated. Smarter technologies and automation, including 3D positioning and guidance, is a key factor to automating the industry, to increase productivity and deliver incredible ROI for contractors.

Traditionally, when a construction site was ready for grading, a surveyor would first stake grade level points. Afterwards, heavy machinery would come in and grade to the levels of the stakes, oftentimes accidentally removing stakes along the way. Although this method worked, technology has evolved to make the process simpler, safer, and more efficient.

With the advent of Global Navigation Satellite Systems (GNSS)-based (3D) machine control & guidance technology, heavy machinery can be

equipped with all of the required components on the machine itself. A machine equipped with an entire system eliminates guesswork between stake points and cut/fill can be performed in real time, increasing job accuracy, productivity, and efficiency.

However, entry barriers remain, keeping adoption rates for 3D machine control and guidance technologies low. High initial investments may be the biggest challenge to higher adoption as ‘one size fits all’ simply does not apply. Multiple configurations and additional features for different machines can increase costs.

Nevertheless, the overall productivity and ROI benefits can easily help justify this hurdle for many applications.

Another challenge is the potentially daunting learning curve and expertise required to properly use this new technology.

Although new systems Source: Conexpo

Hooked on Darby seats!

2016 PETE 367, 550 ISX, 18 Spd Auto Shift, 20 X 69 Axles, 134K Miles, Loaded. $154,500.

2015 PETE 357, 550 ISX, 18 Spd, 20 X 46 Axles, 254K Miles, Loaded $134,500.

More units available at

www.internationalmachinery.com

and workflows are becoming easier to use and more intuitive, these solutions are not yet developed to arrive at a jobsite to begin work immediately. There are technical preparations that need to be calibrated properly beforehand, such as data preparation, site calibration/localization, and RTK setup to ensure maximum effectiveness.

The competitive edge contractors can maintain using the benefits of 3D machine control and guidance systems should outweigh the cons. These new systems aid contractors in setting up a jobsite quickly, while the accuracy and precision of using GNSSbased systems results in significantly less rework and increased job time efficiency.

Overhead and operating costs are also reduced as operators can achieve desired grade rapidly, using less fuel and resources.

Further, completing the work entirely within the cab of a machine promotes a safer work environment and significantly increases production. b

Darby Manufacturing Industrial Seating Specialists T: 705-560-9421 | F: 705-560-4663 www.darbymanufacturing.com

September 2018

Supply Post Central/Eastern Canada Edition · Our Readers Are Your Buyers

brandtused.ca What are you looking for?

Searching for used equipment just got a whole lot easier with advanced searches, currency conversion and monthly payment calculations. And every machine is backed by Brandt – the best-trained and committed after sales support team in the business.

1-888-2-BRANDT FLEXIBLE OPTIONS FINANCING CUSTOMIZED, FIND OUT MORE 1-855-711-4545

Page 9

Page 10

Supply Post Central/Eastern Canada Edition · supplypost.com

ROT 0˚

±4

0

ION AT

36

T I LT R O TAT O R S

&

˚ T I LT

6 MODELS AVAILABLE FOR ALL EXCAVATORS & BACKHOE LOADERS FROM 1.7 - 32 TONS WEIGHT CLASS. TILT ROTATORS COME WITH VARIABLE LOCK COUPLER

MAGNUM ATTACHMENTS WILL GIVE THE WORKING END OF YOUR MACHINERY SUPERIOR PERFORMANCE AND DURABILITY.

71 STEINWAY BLVD, TORONTO, ON M9W 6H6

416.679.8752 | 1.877.640.2862 | FAX 416.679.8753

September 2018

Demag AC 500-8 All Terrain Crane In The Middle Of Stuttgart You would be hardpressed to find a place in Germany that is as busy and congested as the area around the main train station in Stuttgart. And that is exactly where Bietigheim-Bissingen-based crane service provider Wiesbauer had to erect a 90-meter-tall top-slewing tower crane for construction company STRABAGZüblin and STRABAGBMTI. For the challenging project, Wiesbauer decided on its Demag AC 500-8 all terrain crane for a number of reasons, including its compact design and the associated maneuverability.

While getting the eight-axle unit through downtown Stuttgart was a relatively relaxed affair, accessing the work site behind the Landesbank Baden-Württemberg (LBBW) buildings proved to be significantly trickier. Wiesbauer Project Manager Marco Wilhelm explains why: “The area

behind the bank could not be accessed by our heavy goods vehicles directly, as the official access road passes through a bridge with a 30-tonne limit and consequently is not designed to carry the weight of our vehicles.” This meant that an alternative route had to be found for the crane and lowbed trailers. The private tunnel used by Landesbank Baden-Württemberg and Deutsche Bahn, which also led to the setup location for the tower crane behind the LBBW highrise, was the obvious solution. Therefore, one of the busiest intersections in all of Stuttgart had to be closed briefly at five o’clock in the morning so that the crane, assist crane and the lowbed trailers would be able to pass through the tunnel against the direction of traffic.

104-meter hook height with luffing jib Once the vehicles

were at the site, it was time for the Demag AC 500-8 to shine with its ease of assembly: It took the team a mere 6 hours to set up the crane with a WIHI-SSL 60° configuration, a telescopic boom length of 51.80 meters, a 66-meter luffing fly jib, and 120 tonnes of counterweight. This made it possible for the AC 5008 to reach the required hook height of over 104 meters and lift the topslewing tower crane components, which weighed up to 13.5 tonnes, at a radius of 43 meters. The crane’s excellent lifting capacity values at large hook heights and radii were crucial for the Stuttgart assignment.

Shared perception Before the actual lifts to erect the tower crane, a smaller assist crane was first used to lift the corresponding components off the lowbed trailers and set them down on the ground so that they could be preassembled. After this, the Demag AC 500-8 took over the erection work as the main crane, and this meant that it had a number of unique challenges Continued on page 11

REDUCE COSTS - INCREASE PRODUCTIVITY

NEW & USED EQUIPMENT FOR SALE OR RENT

D

D

D

E US

E US

E US

$535,785

$CALL

2017 NEUENHAUSER 2F SUPER SCREENER 2 Fraction tracked star screener for sticky applications, 7m3 Hopper, Low fuel consumption, Quick-changeable screen decks and Variable star speed control.

2017 CBI 5800BT HORIZONTAL HS GRINDER 765HP CAT C18 Engine, 16’ Conveyor, 2 speed track frame, Reversing radiator fan, 30” diameter feed roller, Metal detection system.

48” discharge belt, High ground clearance, excellent condition. 700 hrs.

D

2015 VERMERR HG6000TX Horizontal high speed grinder, 765 HP, CAT C-18 engine, 2,700 hrs, engine rebuilt at approx. 1,700 hrs. Comes with spare screens, hammers, belting and sensors.

1-855-305-0152

US

N

$554,000

2017 KEESTRACK H4 CONE CRUSHER Innovative plant design producing 3 high-grade end products in one pass, Large 3 Deck screen w/oversize return, 5.4m2 Screen area on each deck, Feed size to 185mm (7”), C.S.S. Min. - Max. 6 - 38 mm (2/10”-1 5/10”), Cap. 250 tph. 430 hrs.

ED

EW

E US

$CALL

$CALL 2018 KEESTRACK R3 IMPACT CRUSHER Compact, high volume impact crusher.

Vibrating punch plate pre-screen (3’ x 4”), large 44” rotor, 30” x 38” inlet opening, after-deck screen, side dirt conveyor. Capacity up to 250 tph. Under 30,000kg. Ideal for transport.

$285,000 2017 KEESTRACK K4 SCALPING SCREENER Compact high performance screener Large double-deck pre-screen 1,500x4, 200mm (5’x14’), Punched plate top deck, 3-Way split with a 7m3 hopper, Includes remote control, Capacity up to 350 tph. 375 hours.

INFO@FL-MACHINERY.COM | FRONTLINE-MACHINERY.COM

September 2018 Continued from page 10

ahead of it: Since the tower crane had to be placed between two office buildings right next to the large glass façade of the LBBW high-rise, extremely high operating precision was required. And on top of

Supply Post Central/Eastern Canada Edition · Our Readers Are Your Buyers this, all the tower crane components had to be positioned over and beyond the high-rise and the jib had to be assembled over the latter – no mean feat for crane operators Karlheinz Moll and Steven Ziellmann, who also had to

contend with the fact that there was a wall blocking their line of sight and accordingly had to rely on their BMTI fellow team members to guide them by radio. “In addition, the two high rise buildings provided wind effects that

their experience and the precise controls that characterize the AC 500-8 meant that they had the situation under control at all times and were able to complete the job on time.

“Just like we expected, our AC 500-8 proved to

be the right choice once again,” Project Manager Wilhelm says while explaining that both the crane’s and his team’s performance exceeded his expectations. b Source: Terex

For Total Lube Solutions,

Case IH Launches Limited-Edition 50 Series Axial-Flow Combine To commemorate the rich legacy of Axial-Flow combines, Case IH is excited to launch the 50 series Axial-Flow combine lineup with a special-edition 150 series combine. The 150 series combine features International Harvester heritage styling, color schemes and decals reminiscent of the first Axial-Flow combine in 1977. The memorable white cab top and tire rims give way to the latest harvest advancements to help producers put more grain in the tank.

The productivity enhancements of the legendary single rotor technology, Cross-Flow cleaning system and 2-speed electric shift transmission en-

had to be included in our lift plans,” Karlheinz Moll and Steven Ziellmann say while describing an additional challenge that required for both of them to stay extremely focused throughout the entire project. Fortunately, both

Page 11

GO WITH THE FLO!

able the 150 series combine to handle varying harvest conditions and crop types.

“We’re excited to bring back the retro stylings of the 1977 International Harvester Axial-Flow combines, now paired with productivity enhancements desired to help today’s producers harvest more of what they grow,” said Kelly Kravig, Case IH harvesting marketing manager. “For older generation farmers, this combine is a throwback to their earlier farming days.

For younger generations, this is the combine they grew up in.” b

√ Autogreasers for Your Mobile Equipment √ Fluid Handling Equipment for Your Garage √ Our Mobile Workshops Come to You

Visit us at NORTH AMERICAN MINING EXPO 2018 - Arena Booth #24 Tel

Source: Case-IH

1.800.668.5458

sales@flocomponents.com

www.flocomponents.com

Unreserved public equipment auctions

47 0+

WH EE LL OA DE RS

HY DR AU LIC EX CA VA TO RS

45 0+

Fast, flexible financing available – up to 100%, $0 down*

95 +

2016 Komatsu D155AX-8 | Edmonton

CR AN ES

MO TO RG RA DE RS

CR AW LE RT RA CT OR S

2014 John Deere 350G LC | Winnipeg

5 of 8 – 2014 & 1 of 2 – 2013 Caterpillar 938K | Montreal

20 0+

Volvo G946 AWD | Montreal

24 5+

2013 John Deere 470G LC | Toronto

2012 Caterpillar 140M2 AWD | Edmonton

Grove GMK5275 275 Ton | Toronto

34,190+ items in 75+ auctions including Edmonton, AB Winnipeg, MB Truro, NS Montreal, QC

Sep 4–6 Sep 11 Sep 12 Sep 18–19

Toronto, ON Grande Prairie, AB Chilliwack, BC Saskatoon, SK

Sep 25–26 Oct 2–3 Oct 10 Oct 11

Auction Company License #303043, MV Dealer #10539, MV Dealer No. 4585592, Dealer License 69767, MV Dealer #10539, Auction Company License #309645 *OAC. Terms & conditions apply. See rbauction.com/financing.

Bid in person or online

▸ No minimum bids or reserves ▸ Test and inspect on-site ▸ Open to the public ▸ Free registration

Financing & leasing

Up to 100% financing, with no money down.

More items added daily Call about selling: 1.800.211.3983

See complete listings at rbauction.com

Page 12

Supply Post Central/Eastern Canada Edition · supplypost.com

September 2018

JK Irving Plants Company’s Billionth Tree With Sons Jim And Robert James K. (JK) Irving planted the company’s one billionth tree since 1957. He was joined by sons Jim and Robert – co Chief Executive Officers of J.D. Irving, Limited (JDI). One billion trees planted is a national record in Canada for a private company. Over 400 employees and retirees from New Brunswick, Nova Scotia and Maine attended the official tree planting and unveiling of the commemorative rock that was followed by a BBQ celebration.

The JDI tree planting program had small beginnings with 3000 trees planted in Black Brook, New Brunswick in 1957.

In 1958 the company started the tree nursery in Juniper, N.B. Originally the goal was to produce one million trees.

Eleven years later, the tree planting program had grown to over four million seedlings planted in 1968. In 1986, K.C. Irving planted the 200 millionth tree.

The forests owned and managed by JDI today will absorb 92 million tonnes of carbon dioxide over the next 50 years – equal to 350,000 cars off the road per year for the next 50 years.

When the tree planting program began in 1957 the company had two sawmills and a pulp mill. Today, over 20 million trees a year are planted and there are over 4600 direct employees in Canada

ership and support over his past 70 years in the forest products business,” said son Jim (JD) Irving.

“The timberlands are the foundation for new growth of jobs and capital investment to expand and modernize our facilities to compete. We are not just growing trees; we’re growing opportunities for great people.

We are committed to continuing what my father started. And with the help of everyone here today we’re on the move towards planting the 2nd billionth tree.”

All of the lands owned and managed by J.D. Irving, Limited are environmentally certified through independent audits under the Sustainable Forestry Initiative (SFI) in Canada and US as well as the Forest Stewardship Council (FSC) in Maine. In 2017, the company was honoured with the SFI Leadership in Conservation Award for North America. b

and the US operating 10 sawmills and 1.5 million tonnes per year coming out of the pulp, paper and tissue mills.

The company is one of a handful left in North America today that sustains a value chain from the seedling in the forest to the tissue products on the store shelf.

“I want to thank everyone – past and present who played a part in achieving this great milestone. It has been a very rewarding journey to see these trees planted,” said JK Irving, Chairman of J.D. Irving, Limited.

“From the very beginning we’ve always seen caring for the forest as an important responsibility.

This commitment goes back generations and continues today.”

“On behalf of my brother Robert and myself, we want to thank our father for his lead- Source: JK Irving

From left to right: Jim (JD) Irving, JK Irving, and Robert K. Irving

1-877-625-9677 info@shawbros.ca

DON’T MISS OUT, RESERVE YOUR SPACE TODAY!

99 Hooper Rd., U Unit 3 Barrie, ON

For more information about this premier event, please contact:

MARK CUSACK, National Show Manager mcusack@mpltd.ca Toll-Free: 1.888.454.7469

Best Quality Attachments At The Lowest Possible Price!

www.shawbros.ca

CLASSIFIEDS

TO PLACE AN AD, CALL 1-800-663-4802 OR VISIT WWW.SUPPLYPOST.COM ATTACHMENTS

GRINDERS

Jaw Crusher, 3042 Pioneer Jaw Crusher with generator and switch gear, $200,000. Also other screen decks and conveyor parts for sale, call today for more info. Unit is Crushers, Pulverizers, located in Kakabeka Falls Shears! Own or Rent.

Ontario. vanedequipment.com M Lehto Contracting PHONE: (604) 888-9020 Mikelehto429@hotmail.

PHONE: (877) 255-9293 com PHONE: (807) 629-4642

EQUIPMENT

Shaw Bros. Attachments for excavators, loaders, skidsteers, crusher buckets, screening buckets, thumbs, breakers, grapples, snow equipment & much more at best prices. www.shawbros.ca PHONE: (877) 625-9677

SEVERE DUTY Excavator Rakes, Manual Couplers, Rippers, Buckets, Grapples, Shears & Pulverizers. Made in Canada. Fast Lead Times. www.trkattachments.com PHONE: 1-855-996-9981

CRUSHERS

Jaw Crusher with 443 Cedarapids Kolman Screener Stackers and Generator with switch gear, $125,000. Also other screen decks and conveyor parts for sale, call today for more info. Unit is located in Kakabeka Falls Ontario.

Oscar’s Gravel Products mikelehto429@hotmail. com PHONE: (807) 475-5347

2-650 Case crawlers $6085,000, 1-Dynapac 252 pf packer $65,000, 1-693D JD buncher $9,000; 21000 ft 6.5” fiberglass centron pipe 1250psi, c/w fittings, flanges, & pup joints $6.00/ ft. Gas powered pipe bender $4,500, 7-4x8 single deck electric screeners $2,500/ up. 33-Engines $4,000 / up. Fresh take outs all in running conditions. 1-3306 c/w genset, 1-C9 c/w genset, 7-3406 c/w genset, 1- Detroit 60 c/w genset, 1- Detroit 60 2 speed Allison, 2-3412 1000kva genset, Engines only- 4-3412, 5-3508 ,10D379, 1-D363. Donnelly, AB Permalta Ltd, permaltaltd@gmail.com PHONE: (780) 925-2400

1998 Petersen HC2400-A c/w 400 HP Cummins & remote. New items – clutch, batteries, Main drum bearings, feed wear plate, discharge conv. $125,000.

Phone or Text AL: (604) 813-5500 Next Advertising Deadline is Sept. 21, 2018. Call Sheryl for rates.

CALL: 1-800-663-4802

HAMMERS

Hammers to fit your carrier!

Own or Rent. vanedequipment.com PHONE: (604) 888-9020 PHONE: (877) 255-9293

SEPTEMBER 2018 · PAGE 13

TRENCHERS

2002 Komatsu WA500-3H c/w 8 yd bucket. 27,955 KG, 8,971 hrs., very good running machine. $85,000.

Phone or Text AL: (604) 813-5500

Can’t find what you are looking for? Thousands of more machines and equipment for sale on: www.supplypost.com

2008 Komatsu WA200-6, 2 yard, (Q.A.), 17.5 tires, major W/O’s, $61,000.

Calgary, AB. PHONE: (403) 291-1010

Trench shoring by “Lynn” – 8 ft x 16 ft c/w 4 ft extensions plus 3 sets of spreader bars – 4 ft., 6 ft and 8 ft wide trench. $15,000.

Phone or Text AL: (604) 813-5500

PROCESSORS

TRUCKS (Gravel)

2015 Tigercat H855C processor with a SouthStar QS500 processing head.

Approx 8,200 hours. Can be seen working south of Sundre, AB .

Quinex Contracting Ltd Cochrane, AB quinex@shaw.ca PHONE: (403) 804-2568

SCREENERS

LOADERS (Track)

NEW DeSite SLG 78VFRB for screening sand, soil, and rock. 4ft x 8ft vibratory screen deck. Mesh from 1/8 to 4” available.

Designed for skid steers, compact excavators, and 2 0 1 3 T e r e x P T 8 0 mini loaders up to 78 inch Compact Track Loader, buckets Costs only $8,600.

STK #A011523, 83 HP, CDN 3,100lbs operating load, www.idmcabc.com EXCAVATORS Pilot controls, Auxiliary TOLL FREE: (877) 254-7903 Hydraulics and Electric, Next Advertising Deadline Cab with Heat, 18” Rubber is Sept. 21, 2018. Call Tracks, 78” Bucket, 836 Sheryl for rates.

Hrs…..$52,900 Located in CALL: 1-800-663-4802 Mitchell, ON Delta Power Equipment sales@deltapower.ca 2008 John Deere 350 DLC PHONE: 1-888-903-8772 Excavator with 10,000 LOADERS (Wheel) Hrs, Rebuilt Pumps At 8,000 Hrs. As Well As Bucket Cylinder, Pins And Bushings Remachined, Comes With 2 Buckets.

NEW DeSite SLG Serial #: FF350DX806558 108VFRB Portable Transport Camille Dionne Vibratory Screening rredmond@tcdionne.com 1980 Caterpillar 930 c/w Machine Topsoil, Rock, PHONE: (450) 664-3322 quick attach bucket, log Sand. Compost. 30 to 60 FELLER BUNCHERS grapple, two sets of forks, yds/p/hr. 6ft x 10 ft screen snow blade, spare tire and deck. 1/8 to 4” mesh.

2007 Valmet 445, 7400 chains. MVI custom built $15,400. CDN Located in h r s . Q u a d c o h e a d . trailer included in price. Ontario. $125,000. Calgary, AB. www.idmcabc.com $41,500. Chilliwack, BC PHONE: (604) 845-6242 PHONE: (403) 291-1010 TOLL FREE: (877) 254-7903

YARDERS

‘94 INTL FS674 TK 6x4 Tri-Axle Gravel, owner driven. Well maintained, never damaged/abused.

New Cummins engine (2013) only 274,000 km.

Over $17k in repairs (2017): new trans, starter, clutch, brakes and more.

Road certified, reliable heavy duty truck ready to work. Asking $55k; serious offers considered. robert. uzelac@hotmail.com GEORGE: (416) 536-3495 CELL: (416) 802-3019

Advertise your machines in the classifieds! Call Sheryl for deadline and rates.

CALL: 1-800-663-4802 Supply Post publishes nationally with an East and West edition, need a copy?

CALL: 1-800-663-4802 Sign up for the Supply Post mailing list – call today: TOLL FREE: 1-800-663-4802

1989 Madill 122 Yarder, Well maintained c/w 1990 Fruehauf Hiboy Flatdeck Trailer. Please phone for Info and Price. Victoria, BC PHONE: (250) 558-9009 Equipment For Sale Online – We have thousands of equipment & trucks for sale at SupplyPost.com! Log on today... www.supplypost.com

Next Deadline:

September 21, 2018 for the October 2018 issue Call 1-800-663-4802 to book an ad

Let’s get it sold!

DEERE CONSTRUCTION Parts & Components

One of the largest inventories of used, rebuilt, and new surplus Deere parts and components in North America.

We also stock parts for Hitachi, Timberjack, Caterpillar, Ditch Witch and can locate those hard to find parts that we may not have in stock.

BRANDT VALUE PARTS

1-877-685-4886

Supply Post Central/Eastern Canada Edition · supplypost.com

JOHN DEERE

Page 14

September 2018 Deere says the cab on the W170 is 6-inches wider and is quieter and more comfortable than previous models.

New W170 Windrower Targets Canola Growers FRONT PAGE STORY: New John Deere W170 Windrower makes swathing faster and easier in heavy crop and hilly conditions.

For even more productivity gains, McKelvey says producers can equip the windrower with John Deere AutoTrac guidance.

“Using AutoTrac, customers can harvest more comfortably and more accurately. AutoTrac also reduces operator fatigue, saves fuel by reducing overlap, and helps customers swath more acres in less time,” says McKelvey.

Seven draper headers are available in 15- to 45-foot (4.57 to 13.72 m) widths and provide improved access to the end shield. The 30- to 45-foot (9.14 to 13.72 m) drapers have belts that are 8 inches (20.3 cm) deeper and provide 30 percent more capacity than previous belts, giving operators the ability to swath faster in highyielding canola fields. The new draper models include the 1415D, 1420D, 1425D, 1430D, 1435D, 1440D and 1445D. Programmable onetouch return buttons simplify header height control, tilt, knife speed and reel operation. A belt slip warning helps operators stay ahead of potential problems like plugging. Single side hydraulic hookups make connecting or removing the header easier when it’s time to move to the next field or to change crops.

“A 6-inch (15.2 cm) wider cab is quieter and more comthan fortable

previous models,” says McKelvey. “Two trim levels for the cab are available and include a leather seat and telescoping steering.

For working at night, the new W170 Windrower has eight LED lights that provide outstanding 360-degree visibility.”

For more info, contact your local John Deere dealer or visit JohnDeere.com.

About John Deere Deere & Company (NYSE: DE) is a world leader in providing advanced products and services and is committed to the success of customers whose work is linked to the land — those who cultivate, harvest, transform, enrich and build upon the land to meet the world’s dramatically increasing need for food, fuel, shelter and infrastructure. Since 1837, John Deere has delivered innovative products of superior quality built on a tradition of integrity. b Source: John Deere

Seven draper headers in 15- to 45-foot widths are available for the W170, including the 1435D shown here.

JOHN DEERE

o meet the demands of small grain customers growing high-yielding canola varieties, John Deere introduces its smart, powerful W170 Windrower and a wide range of draper headers to make swathing faster and easier in heavy crop and hilly conditions.

“During benchmarking studies in heavy crop conditions, the W170 Windrower showed an impressive 20 percent productivity gain,” Nick McKelvey, John Deere marketing manager for windrowers, says. “With 46 inches (116.8 cm) of ground clearance and 12inch (30.48 cm) wider walking beams, tall windrows can flow easily beneath the machine’s frame and are corralled by a new swath compressor. The swath compressor forms loose crop into a tight, uniform windrow, making it easier for a combine to pick up, eliminating the need for a canola roller.”

Part of the productivity gain realized by the W170 can be attributed to its proven John Deere 4.5L engine that produces 12 percent more horsepower than its W155 predecessor.

The engine is paired with a higher-capacity variablespeed fan that can be reversed, making it easier for operators to clean. At 27.3 mph (43.9 kph), the W170 has the fastest transport speed in the industry to quickly move operators from field to field.

The W170 is powered by a John Deere 4.5L engine that produces 12 percent more horsepower than its W155 predecessor.

JOHN DEERE

T

September 2018

Supply Post Central/Eastern Canada Edition · Our Readers Are Your Buyers

Shredder Upgrades Calls For An Upgrade To Sennebogen At Lakeside Auto Recyclers

Mike Levell says he and his family business have been easing their way into the auto shredding business. With their latest move up to a 4,000 HP, 6085 auto shredder last April, Lakeside Auto Recyclers has picked up the pace, and there’s no time for time off!

“It’s a full-throttle lifestyle,” Levell says.

With the new shredder, he found that his previous material handler couldn’t keep up with the challenge. “It didn’t have the best balance, and it needed a lot of maintenance and downtime. I wanted something more suitable for this kind of production

- a more reliable machine.”

Levell had spent some time traveling to other recycling yards to see their shredder operations.

What he saw convinced him that Lakeside needed a new Sennebogen machine to feed his 6085. “I got down to two possible material handler lines.

I really gravitated to the way the Sennebogens are designed, and I learned that their service and support is really great,” he concluded.

In April, after the 6085 was commissioned, Lakeside took delivery of a new Sennebogen 840 M. This model is a rubbertired 117,000 lb. (53,000

kg) purpose-built machine powered by a 305 HP (227 kW) Cummins engine. Levell had it fitted with Sennebogen’s orange peel grapple.

After almost a year in production, the 6085 is churning out shred as advertised and is running smoothly.

The shredder sets the pace for every other aspect of the operation. “It’s a hungry machine! Yesterday I watched it eat a 1-ton Chevrolet pickup in about 25 seconds,” says Levell. “It can normally process two or three cars in a minute.” As long as it’s getting fed, the 6085 will produce of 55 tons/ hr. Any problem with other equipment just gets in the way of Lakeside’s mission to “Shred The World!”

Lakeside is now receiving trailer-loads of cars to process from up to 100 miles away and uses the old machine to move

cars into the staging area by the shredder. A wheel loader hauls away the outbound shred and fluff.

“The 840’s main job is to feed the shredder and keep everything going, without any downtime,” Levell explains. “If you can’t feed the shredder, you’re pretty well out of business and Sennebogen helps keep my operation going.”

Along with managing the business at Lakeside, Levell is often at work in the cab of the new Sennebogen. “It’s an amaz-

ing machine – it’s really safe, really quiet, really comfortable. It has a good feel for the operator; smooth, strong and efficient. The cab is nice and quiet; you can’t even hear the shredder. I love the two cameras (rear & right side), so you can see out the back and see through the blind spot next to you. And it’s comfortable. When you’re spending 10 hours a day in here, it’s the place you want to be.”

Levell credits Sennebogen’s hydraulic design

Page 15 for much of its reliability. “There’s no electronics. So there’s less to go wrong.” To date, the Sennebogen has also met Lakeside’s expectation for dealer support. “Murphy Tractor has been really good; right on the spot. Once we have a few more Sennebogens in the yard, I’ll send a couple of my guys down to the Training Center in Charlotte. For now, Murphy has been on top of all the service.” b Source: Sennebogen

SEE farming innovation in action Sept. 11, 12 & 13, 2018 Woodstock, Ontario

Join more than 40,000 attendees to experience agricultural technology and innovation at Canada’s foremost outdoor farm event. This year marks the 25th anniversary of bringing the best and latest in agriculture to the field. See 750 exhibitors showcasing products and services through interactive displays and live demonstrations of machinery, livestock, crops, niche markets, energy and much more!

outdoorfarmshow.com | 1-800-563-5441 | #CofS18 info@outdoorfarmshow.com

Canada’s Outdoor Farm Show

@outdoorfarmshow

@outdoorfarmshow

Page 16

Supply Post Central/Eastern Canada Edition · supplypost.com

September 2018

CHECK OUT THE ALL NEW SUPPLYPOST.COM! Join the over 35,000 monthly users of www.supplypost.com and find the equipment you need in just a few quick clicks!

Mobile Users – make an inquiry from your phone or tablet!

NEW SITE FEATURES:

HAVE SOMETHING TO SELL?

• More equipment types on the home page, so you can quickly click on the machines you need.

• Even more news, articles and job stories in our INDUSTRY NEWS section.

• Listings with key data fields filled in are pushed to the top of relevant searches

Place your truck or equipment in front of 35,000 monthly viewers online and 15,000 more in print.

• YEAR • MAKE • MODEL • PRICE • PHOTO • VIDEO

GET IT SOLD!!

Go to www.supplypost.com/advertise to submit your ad securely online or call the office at 1-800-663-4802 and we will help you

WWW.SUPPLYPOST.COM

LIKE US ON

1-855-646-6993 ONTARIO | MARITIMES | QUEBEC

SALES, SERVICE & PARTS

“Your Transport p Trailer Superstore!” p

• Tandem • Tridem • Quad • B Train

• All Axle Configurations • Drops & Flats

• Full Galvanized • Drops & Flats

B Train Flats • Beavertails • Live Bottom • Tags

• All Axle Configurations • Drops & Flats

• Walking Floors • Dry Bulk Tanks • Dump Trailers

COME VISIT US AT: WOODSTOCK, ON, SEPT 11, 12 & 13TH

SUDBURY, ON, SEPT 12TH & 13TH

VIEW ALL OUR NEW & USED INVENTORY AT TRANSEASTTRAILERS.COM