Page 1

Publication list

July 2016-June 2017

Partnering with industry for economic impact

Partnering with academia for research impact

n Center for Advanced Microelectronics Manufacturing n Center for Autonomous Solar Power n Center for Energy-Smart Electronic Systems n Integrated Electronics Engineering Center n NorthEast Center for Chemical Energy Storage


S3IP Publications, Presentations, and Poster Presentations Journal Publications 1. A. Abdellahi, A. Urban, S. Dacek, G. Ceder, “Understanding the Effect of Cation Disorder on the Voltage Profile of Lithium Transition-Metal Oxides,” Chemical Materials, vol. 28, pp. 5373-5383, July 2016. (NECCES) 2. Siva P. Adusumilli, Jeremiah M. Dederick, In-Tae Bae, Sean M. Garner, Anju Sharma, Charles R. Westgate, Tara P. Dhakal, “Iron Pyrite Thin Films Grown through a One-step Annealing of Iron Oxide Using Sulfur Sources, Tert-butyl Disulfide and H2S,” Thin Solid Films, vol. 615, pp. 217-280, Sept. 30, 2016. (CASP) 3. Faruk Ballipinar, Naoki Kitamura, Abhishek Nandur, Alok C. Rastogi, “Cadmium Oxysulfide Cd(S,O) as Novel High Transmittance Buffer Layer Formed by Surfactantmediated Chemical Bath Deposition for Thin-Film Heterojunction Solar Cells,” Journal of Applied Physics, vol. 121, 035302, Nov. 21, 2016. (CASP) 4. Steve Boyer, Jian Liu, Sandy Zhang, Matthew Ehrlich, Danielle L. McCarthy, Linyue Tong, Jared DeCoste, William E. Bernier, Wayne E. Jones Jr., “The Role of Ruthenium Photosensitizers in the Degradation of Phenazopyridine with TiO2 Electrospun Fibers,” Journal of Photochemistry and Photobiology A: Chemistry, vol. 329, pp. 46-53, October 2016. (IEEC) 5. G. Choi and S. Choi, “Cellular Flow in Paper-based Microfluidics,” Sensors and Actuators: B. Chemical, vol. 237, pp. 1021-1026, Dec. 1, 2016. (ADL) 6. Eric Cotts, Jiye Fang, Wayne E. Jones Jr., David Klotzkin, Greta Myers, Bruce White, “Work in Progress — A STEM Program Focused on Transfer Student Success at Binghamton University,” IEEE Frontiers in Education, pp. 1-4, October 2016. (IEEC) 7. F. Dong, S. Maganty, S. J. Meschter, S. Nozaki, T. Ohshima, T. Makino, J. Cho, “Electron Beam Irradiation Effect on the Mechanical Properties of Nanosilica-Filled Polyurethane Films,” Polymer Degradation and Stability, vol. 141, pp. 45-53, May 2017. (ADL) 8. Nicholas Faenza, Zachary W. Lebens-Higgins, Pinaki Mukherjee, Shawn Sallis, Nathalie Pereira, Fadwa Badway, Anna Halajko, Gerbrand Ceder, Frederic Cosandey, Louis F. J. Piper, Glenn G. Amatucci, “Electrolyte Induced Surface Transformation and Transition Metal Dissolution of Fully Delithiated LiNi0. 8Co0. 15Al0. 05O2,” Langmuir, vol. 33 (37), pp 9333–9353, June 2017. (NECCES, ADL) 9. M. Farmand, X. Shi, J. Lee, Y.-S. Yu, J. Cabana, R. Celestre, P. Denes, F.C. Strobridge, C. P. Grey, J. Joseph, A. L. D. Kilcoyne, H. Krishnan, F. R. N. C. Maia, S. Marchesini, H. Padmore, T. Tyliszczak, T. Warwick, D. A. Shapiro, “Near-edge X-ray Refraction Fine Structure Microscopy,” Applied Physics Letters, vol. 110 (6), February 2017. (NECCES) 10. Alexander C. Forse, John M. Griffin, Céline Merlet, Javier Carretero-Gonzalez, AbdulRahman O. Raji, Nicole M. Trease, Clare P. Grey, “Direct Observation of Ion Dynamics in Supercapacitor Electrodes Using in situ Diffusion NMR Spectroscopy,” Nature Energy 2 February 2017, (NECCES) 1


11. A. Fraiwan, L. Kwan, S. Choi, “A Disposable Power Source in Resource-limited Environments: A Paper-based Biobattery Generating Electricity from Wastewater,” Biosensors and Bioelectronics, vol. 85, pp. 190-197, Nov. 15, 2016. (ADL) 12. A. Fraiwan, H. Lee, S. Choi, “A Paper-based Cantilever Array Sensor: Monitoring Volatile Organic Compounds with Naked Eye,” Talanta, vol. 158, pp. 57-62, September 2016. (ADL) 13. A. Fraiwan and S. Choi, “A Stackable, Two-chambered, Paper-based Microbial Fuel Cell,” Biosensors and Bioelectronics, vol. 83, pp 27-32, Sept. 15, 2016. (ADL) 14. Y. Gao and S. Choi, “Stepping Toward Self-powered Papertronics: Integrating Biobatteries into a Single Sheet of Paper,” Advanced Materials Technologies, vol. 2, pp1600194, Jan. 2, 2017. (ADL) 15. Zhongyang Ge and David Klotzkin, “Emission Enhancements in Phosphor Chips with Surface Gratings,” Journal of Luminescence vol. 181, pp. 184-188, January 2017. (ADL) 16. Z. Guo, N. J. Martucci, Olivas F. Moreno. E. Tako. G. J. Mahler, “TiO2 Nanoparticle Ingestion Alters Nutrient Absorption in the Small Intestine,” NanoImpact, vol. 5, pp. 70-82, January 2017. (ADL) 17. N. Kang, F. Lin, W. Zhao, J. P. Lombardi, M. Almihdhar, K. Liu, S. Yan, J. Kim, J. Luo, B. S. Hsiao, M. Poliks, C. J. Zhong, “Nanoparticle-nanofibrous Membranes as Scaffolds for Flexible Sweat Sensors,” ACS Sensors, vol. 1, pp. 1060-1069, Aug. 8, 2016. (CAMM) 18. Y. Kahn, M. Garg, Q. Gui, M. Schadt, A. Gaikwad, D. Han, N. S. D. Yamamoto, P. Heart, R. Welte, W. Wilson, S. Czarnecki, M. Poliks, Z. Jin, K. Ghose, F. Egitto, J. Turner, A. C. Arias, “Flexible Hybrid Electronics: Direct Interfacing of Soft and Hard Electronics for Wearable Health Monitoring,” Advanced Functional Materials, October 2016. (CAMM) 19. K. Karki, Y. Huang, S. Hwang, A. D. Gamalski, M. S. Whittingham, G. Zhou, E. A. Stach, “Tuning the Activity of Oxygen in LiNi0.8Co0.15Al0.05O2 Battery Electrodes,” ACS Applied Material Interfaces, vol. 8(41) pp. 27762-27771, September 2016. (NECCES) 20. Him Karki, Yiqing Huang, Stan Whittingham, Eric Stach, Guangwen Zhou, “ETEM Study of Oxygen Activity in LiNi0.8Co0.15Al0.05O2 (NCA) Cathode Materials at Various States of Charge,” Microscopy and Microanalysis, vol. 22 (S3) pp. 1332-1333, July 25, 2016. (NECCES) 21. Zachary Lebens-Higgins, Nicholas Faenza, Pinaki Mukherjee, Shawn Sallis, Fadwa Badway, Nathalie Pereira, Christoph Schlueter, T-L Lee, Frederic Cosandey, Glenn G. Amatucci, Louis F. P. Piper, “Electrochemical and Thermal Stress of LiNi0.8Co0.15Al0.05O2 Electrodes: Evolution of Aluminum Surface Environments,” EECS Transactions, vol. 80, 10, pp. 197-0205, November 2017. (ADL, NECCES)

2


22. Hao Liu, Phoebe K. Allan, Olaf J. Borkiewicz, Charles Kurtz, Clare P. Grey, Karena W. Chapman, Peter J. Chupas, “A Radially Accessible Tubular in situ X-ray Cell for Spatially-resolved Operando Scattering and Spectroscopic Studies of Electrochemical Energy Storage Devices,” Journal of Applied Crystallography, vol. 49, no. 5, October 2016. (NECCES) 23. Hao Liu, Haodong Liu, Saul H. Lapidus, Y. Shirley Meng, Peter J. Chupas, Karena W. Chapman, “Sensitivity and Limitations of Structures from X-ray and Neutron-based Diffraction Analyses of Transition Metal Oxide Lithium Battery Electrodes,” Journal of Electrochemical Society, vol. 164 (9), pp A1802-1811, June 2017. (NECCES) 24. Hao Liu, Mark Wolf, Khim Karki, Young-sang Yu, Eric A. Stach, Jordi Cabana, Karena W. Chapman, Peter Chupas, “Inter-granular Cracking as a Major Cause of Long Term Capacity Fading of Layered Cathodes,” Nano Letters, vol. 17, pp 3452-3457, May 2017. (NECCES) 25. Jian Liu, Danielle L. McCarthy, Linyue Tong, Michael J. Cowen, John M. Kinsley, Laura Sonnenberg, Kenneth H. Skorenko, Jared B. DeCoste, William E. Bernier, Wayne E. Jones Jr., “Poly (3,4-ethylenedioxythiophene) (PEDOT) Infused TiO2 Nanofibers: The Role of Hole Transport Layer in Photocatalytic Degradation of Phenazopyridine as a Pharmaceutical Contaminant,” RSC Advances, vol., 6, pp. 113884-113892, December 2016. (IEEC) 26. Jue Liu, Liang Yin, Lijun Wu, Jianming Bai, Seong-Min Bak, Xiqian Yu, Yimei Zhu, Xiao-Qing Yang, Peter G. Khalifah, “Quantification of Honeycomb Number-Type Stacking Faults: Application to Na3Ni2BiO6 Cathodes for Na-Ion Batteries,” Inorganic Chemistry, vol. 55, (17), pp 8478-8492, Aug. 17, 2016. (NECCES) 27. L. Liu and S. Choi, “Self-sustaining, Solar-driven Bioelectricity Generation in Micro-sized Microbial Fuel Cell Using Co-culture of Heterotrophic and Photosynthetic Bacteria,” Journal of Power Sources, vol. 348, pp. 128-144, April 30, 2017. (ADL) 28. Aolin Lu, Dong-Liang Peng, Fangfang Chang, Zakiya Skeete, Shiyao Shan, Anju Sharma, Jin Luo, Chuan-Jiang Zhong, “Composition- and Structure-Tunable GoldCobalt Nanoparticles and Electrocatalytic Synergy for Oxygen Evolution Reaction,” ACS Applied Materials and Interfaces, vol. 8, pp. 20082-20091, 2016. (ADL) 29. S. Maktabi and P. Chiarot, “Electrohydrodynamic Printing of Organic Polymeric Resistors on Flat and Uneven Surfaces,” Journal of Applied Physics, vol. 120, Issue 8, p. 084903, August 2016. (ADL) 30. Johannes Martin, Melanie Graf, Thilo Kramer, Christian Jooss, Min-Ju Choe, Katsuyo Thornton, Karl-Michael Weitzel, “Charge Attachment Induced Transport Bulk and Grain Boundary Diffusion of Potassium in PrMnO3” Physical Chemistry Chemical Physics, March 2017. (NECCES) 31. Danielle L. McCarthy, Jian Liu, Derek B. Dwyer, Jennifer L. Troiano, Steven M. Boyer, Jared B. DeCoste, William E. Bernier, Wayne E. Jones Jr., “Electrospun Metal-organic Framework Polymer Composites for the Catalytic Degradation of Methyl Paroxon,” RSC New Journal of Chemistry, vol. 41(17), pp. 8748-8753, June 19, 2017. (IEEC) 3


32. K. Nemati, H. A. Alissa, B. T. Murray, B. G. Sammakia, R. Tipton, M. J. Seymour, “Comprehensive Experimental and Computational Analysis of a Fully Contained Hybrid Server Cabinet,” Journal of Heat Transfer, vol. 139(8), p.082101, April 11, 2017. (ES2) 33. K. Nemati, H. A. Alissa, B. T. Murray, K. Schneebeli, B. Sammakia, “Experimental Failure Analysis of a Rear Door Heat Exchanger With Localized Containment,” IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 7(6), pp. 882-892, April 4, 2017. (ES2) 34. Y. Niu, H. Wang, S.B. Park, “A general strategy of in situ Warpage Characterization for Solder Attached Packages with Digital Image Correlation Method,” Opt. Lasers Eng., vol. 93, pp. 9-18, June 2017. (IEEC) 35. Y. Niu, S. Shao, S.B. Park, C. L. Kao, “Prediction of Deformation During Manufacturing Processes of a Silicon Interposer Package with TSVs,” Microelectron. Reliab, vol. 65, pp. 234-242, October 2016. (IEEC) 36. Y. Niu, J. Wang, S.B. Park, “The Complete Packaging Reliability Studies through One Digital Image Correlation System,” Proceedings of the 67th ECTC, pp. 19161921, May 30-June 2, 2017. (IEEC) 37. A Y. Park, S. C. Chaparala, S.B. Park, “Risk Assessment of the Crack Propagation and Delamination of the Cu-to-Cu Direct Bonded (CUDB) Interface,” Microelectron. Reliab., vol. 66, pp. 113-121, November 2016. (IEEC) 38. Kate E. Pelcher, Christopher C Milleville, Linda W Wangoh, Junsang Cho, Aaron Sheng, Saurabh Chauhan, Matthew Y. Sfeir, Louis F. J. Piper, David F. Watson, Sarbajit Banerjee, “Programming Interfacial Energetic Offsets and Charge Transfer in β-Pb0.33V2O5/Quantum-Dot Heterostructures: Tuning Valence Band Edges to Overlap with Midgap States,” J. Phys. Chem. C, vol. 120 (51), pp 28992–29001, Dec. 6, 2016. (ADL) 39. Ruimin Qiao, Qinghao Li, Zengqing Zhuo, Shawn Sallis, Oliver Fuchs, Monika Blum, Lothar Weinhardt, Clemens Heske, John Pepper, Michael Jones, Adam Brown, Adrian Spucces, Ken Chow, Brian Smith, Per-Anders Glans, Yanxue Chen, Shishen Yan, Feng Pan, Louis F. J. Piper, Jonathan Denlinger, Jinghua Guo, Zahid Hussain, Yi-De Chuang, Wanli Yang, “High-efficiency in situ Resonant Inelastic X-ray Scattering (iRIXS) Endstation at the Advanced Light Source,” Review of Scientific Instruments, vol. 88, March 2017. (NECCES) 40. Maxwell D. Radin, Judith Alvarado, Y. Shirley Meng, Anton Van der Ven, “Role of Crystal Symmetry in the Reversibility of Stacking-Sequence Changes in Layered Intercalation Electrodes,” Nano Letters, vol. 17 (12), pp. 7;789-7795, October 2017. (NECCES) 41. M. Radin, S. Hy, M. Sina, C. Fang, H. Liu, J. Vinckeviciute, M. Zhang, M. S. Whittingham, Y. S. Meng, A. Van der Ven, “Narrowing the Gap Between Theoretical and Practical Capacities in Li-ion Layered Oxide Cathode Materials,” Advanced Energy Materials, July 2017. (NECCES) 4


42. M. Radin, A. Van der Ven, “The Stability of Prismatic and Octahedral Coordination in Layered Oxides and Sulfides Intercalated with Alkali and Alkaline-earth Metals,” Chemistry of Materials, vol. 28, 7898-7904 October 2016. (NECCES) 43. Pravakar P. Rajbhandari, André Bikowski, John D. Perkins, Tara P. Dhakal, Andriy Zakutayev, “Combinatorial Sputtering of Ga-doped (Zn,Mg)O for Contact Applications in Solar Cells,” Solar Energy Materials and Solar Cells,” vol. 159, pp 219-226, Jan. 31, 2017. (CASP) 44. C. M. Sakolish and G. J. Mahler, “A Novel Microfluidic Device to Model the Human Proximal Tubule and Glomerulus,” RSC Advances, vol. 7, pp. 4216-4225, January 2017. (ADL) 45. R. R. Salary, J. P. Lombardi, M. S. Tootooni, R. Donovan, P. K. Rao, P. Borgesen, M. D. Poliks, “Computational Fluid Dynamics Modeling and Online Monitoring of Aerosol Jet Printing Process,” Journal of Manufacturing Science and Engineering, vol. 139 (2), pp. 021015, October 2016. (CAMM) 46. S. Shao, D. Liu, Y. Niu, K. O’Donnell, D. Sengupta, S.B. Park, “A Study on the Thermomechanical Reliability Risks of Through-Silicon-Vias in Sensor Applications,” Sensors, vol. 17, 2, p. 322, Feb. 9, 2017. (IEEC) 47. Navjot K. Sidhu, A. C. Rastogi, “Bifacial Carbon Nanofoam-fibrous PEDOT Composite Supercapacitor in the 3-electrode Configuration for Electrical Energy Storage,” Synthetic Metals, vol. 2019, pp. 1-10, Sept. 15, 2016. (CASP) 48. Kenneth Skorenko, Rose Bernier, Jian Liu, Brad Galusha, Frank Goroleski, William Bernier, Jeffrey Mativetsky, Wayne E. Jones Jr., “Thermal Stability of Nanoparticle Bound Organic Chromophores with ZnO,” Dyes and Pigments, vol. 131, pp. 69-75, March 11, 2016. (IEEC) 49. Linyue Tong, Jian Liu, Steven M. Boyer, Laura A. Sonnenberg, Maggie T. Fox, Dongsheng Ji, Jun Feng, William Bernier, Wayne E. Jones Jr., “Vapor-phase Polymerized poly(3,4-ethylenedioxythiophene) (PEDOT)/TiO2 Composite Fibers as Electrode Materials for Supercapacitors,” Electrochimica Acta, vol. 224, pp. 133-141, Dec. 5, 2016. (IEEC) 50. N. M. Trease, I. D. Seymour, M. Radin, H. Liu, S. Hy, N. Cernova, P. Parikh, A. Devaraj, K. M. Wiaderek, P. J. Chupas, K. chapman, M. S. Whittingham, S. Y. Meng, A. Van Der Ven, G. Grey, “Identifying the Distribution of Al3 in LiNi0.8Co0.15Al0.05O2,” Chemistry of Materials, Oct. 7, 2016. (NECCES) 51. J. Vinckeviciute, M. Radin, A. Van der Ven, “Stacking Sequence Changes and Na Ordering in Layered Intercalation Materials,” Chemistry of Materials, vol. 28 (23), pp. 8640-8650, November 2016. (NECCES) 52. Matthew Wahila, Jennifer Amey-Proper, Wayne E. Jones Jr., Nancy Stamp, Louis Piper, “Teaching Advanced Science Concepts Through Freshman Research Immersion,” European Journal of Physics, vol. 38, pp. 025704, Feb. 3, 2017. (IEEC, ADL) 5


53. J. Wang, R. Liu, D. Liu, and S.B. Park, “Advancement in Simulating Moisture Diffusion in Electronic Packages under Dynamic Thermal Loading Conditions,” Microelectron. Reliab., vol. 73, pp. 42053, April 19, 2017. (IEEC) 54. Xiaoya Wang, Yiqing Huang, Dongsheng Ji, Fredrick Omenya, Khim Karki, Shawn Sallis, Louis F. J. Piper, Kamila M. Wiaderek, Karena W. Chapman, Natasha A. Chernova, and M. Stanley Whittingham, “Structure Evolution and Thermal Stability of High-Energy Density Li-ion Battery Cathode Li2VO2F,” Journal of The Electrochemical Society, vol. 164 (7) pp. A1-A7, 2017. (NECCES, ADL) 55. Linda W. Wangoh, Shawn Sallis, Kamila M. Wiaderek, Yuh-Chieh Lin, Bohua Wen, Nicholas F. Quackenfuxh, Natasha A. Chernova, Jinghua Guo, Lu Ma, Tianping Wu, Tein-lin Lee, Christoph Schlueter, Shyue Ping Ong, Karena Chapman, M. Stanley Whittingham and Louis F. J. Piper, “Uniform Second Li-ion Intercalation in Solid State ε-LiVOPO4,” Applied Physics Letters, vol. 109 (5), August 2016. (NECCES) 56. E. H. Wong and S.B. Park, “Microelectronics Reliability Moisture Diffusion Modeling – A Critical Review,” Microelectron. Reliab., vol. 65, pp. 318-326, October 2016. (IEEC) 57. Ji Wu, Ian Byrd, Congrui Jin, Jianlin Li, Hao Chen, Tyler Camp, Ryan Bujol, Anju Sharma, Hanlei Zhang, “Reinvigorating Reverse-Osmosis Membrane Technology to Stabilize the V2O5 Lithium-Ion Battery Cathode,” Chemistry Electrochemistry, vol. 4, pp. 1181-1189, Feb. 27, 2017. (ADL) 58. Xin Wen, Brandon Okraszewski, Pragun Babber, James Cash, Stephen Cain, David Klotzkin, “Effects of High-g Impact on Physical, Electrical, and Optical Characteristics of Light-emitting Diodes,” Journal of Forensic Sciences, May 8, 2017. (IEEC) 59. S. Yan, X. Liu, Z. Skeete, N. He, Z.-H. Xie, W. Zhao, JP Lombardi III, K. Liu, N. Kang, J. Luo, B. S. Hsiao, M. D. Poliks, I. Gitsov, C. J. Zhong,, “Decoration of Nanofibrous Paper Chemiresistors with Dendronized Nanoparticles toward Structurally Tunable Negative-going Response Characteristics to Human Breathing and Sweating,” Journal of Advanced Materials Interfaces, vol. 4, pp. 1700380, Sept. 19, 2017. (CAMM) 60. W. Yang, K. Lee, S. Choi. “A Laminar-flow Based Microbial Fuel Cell Array,” Sensors and Actuators: B. Chemical, vol. 243, pp. 292-297, May 1, 2017. (ADL) 61. W. Yang, W. Xuejian, S. Choi, “A Dual-channel, Interface-free, Bacteria-based Biosensor for Highly-Sensitive Water Quality Monitoring,” IEEE Sensors, vol. 16, pp. 8672-8677, Dec. 1, 2016. (ADL) 62. Hanlei Zhang, Khim Karki, Yiqing Huang, M. Stanley Whittingham, Eric Stach, Guangwen Zhou, “An Atomic Insight Into the Layered/Spinel Phase Transformation in Charged LiNi0.80Co0.15Al0.05O2 Cathode Particles,” The Journal of Physical Chemistry, C.,” vol. 121 (3), pp. 1421-1430, Jan. 11, 2017. (NECCES)

6


Conference Proceedings 1. S. Alkharabsheh, B. Ramakrishnan, B. Sammakia, “Pressure Drop Analysis of Direct Liquid Cooled (DLC) Rack,” Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 16th Intersociety Conference, pp. 815-823, May 30June 2, 2017. (ES2) 2. H. A. Alissa, K. Nemati, B. G. Sammakia, M. J. Seymour, R. Tipton, D. Mendo, K. Schneebeli, “Chip to Chiller Experimental Cooling Failure Analysis of Data Centers: The Interaction Between IT and Facility,” IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 6(9), pp. 1361-1378, Aug. 31, 2016. (ES2) 3. H. A. Alissa, K. Nemati, B. G. Sammakia, M. J. Seymour, R. Tipton, T. Wu, K. Schneebeli, “On Reliability and Uptime of IT in Contained Solution,” Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2016 15th IEEE Intersociety Conference” pp. 1415-1425, July 21, 2016. (ES2) 4. Faruk Ballipinar, Alok C. Rastogi, Sean M. Garner, Seth B. Darling, “Planar Heterojunction Mixed Halide Perovskite-PCBM Solar Cells on Flexible Glass Substrates Processed at Low-Temperature without ITO,” Proceedings of the 43rd IEEE PVSC, Nov. 21, 2016. (CASP) 5. E. Cho, M. Mohammadifar, S. Choi., “A Self-Powered Sensor Patch for Glucose Monitoring in Sweat,” IEEE MEMS 2017, pp. 366-399, Las Vegas, NV, Jan 22-26, 2017. (ADL) 6. J. Cho, R. Sheikhi, S. Mallampati, L. Yin, D. Shaddock, “Bismuth-Based Transient Liquid Phase (TLP) Bonding as High-Temperature Lead-Free Solder Alternatives,” Proceedings of the 67th Electronic Components and Technology Conference, pp. 1553-1559, Lake Buena, FL, May 30-June 2, 2017. (IEEC) 7. M. Del Valle, C. Caceres, A. Ortega, K. Nemati, B. Sammakia, “Quasi-steady Modeling of Data Center Heat Exchanger Under Dynamic Conditions,” Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2017 16th IEEE Intersociety Conference, pp. 878-884, May 2017. (ES2) 8. Courtney Edwards and Daryl Santos, “Efficacy of the NEH Heuristic in a Hybrid Flow Shop Environment,” Proceedings of the 5th Annual World Conference of the Society for Industrial and Systems Engineering, San Francisco Bay Area, CA, Oct. 13-14, 2016. (IEEC) 9. Y. Gao, M. Mohammadifar, D. Hassett, S. Choi, “A Novel Screening Platform for Electromicrobiology: A 3-D Paper-based Sensing Array with Conductive PEDOT:PSS,” IEEE Sensors 2016, pp. 1655-1657, Orlando, FL, Oct. 30-Nov. 2, 2016. (ADL) 10. Y. Hadad, B. Ramakrishnan, S. Alkharabsheh, P. Chiarot, B. Sammakia, “Numerical Modeling and Optimization of a V-groove Warm Water Cold-plate,” Thermal Measurement, Modeling & Management Symposium (SEMI-THERM), 2017 33rd, pp. 314-319, March 2017. (ES2) 7


11. Andrew J. Ilott, Mohaddese Mohammadi, Hee Jung Chang, Clare P. Grey, Alexej Jershow, “Real-time 3D Imaging of Microstructure Growth in Battery Cells Using Indirect MRI,” Proceedings of the National Academy of Sciences of the United States of America,” pp. 1-6, July 2016. (NECCES) 12. S. Khalili, H. A. Tradat, M. I. Nemati, B. Sammakia, M. Seymour, “Experimental Methods to Characterize the Impact of Cross Flow Orientation on Jets of Air after a Perforated Tile,” Thermal Measurement, Modeling & Management Symposium (SEMI-THERM), pp. 163-171, March 2017. (ES2) 13. J. P. Lombardi, M. D. Poliks, W. Zhao, S. Yan, N. Kang, J. Li, J. Luo, C. J. Zhong, Z. Pan, M. Almihdhar, B. S. Hsiao, M. L. Zabran, S. S. Mittal, K. Ghose, “Nanoparticle Based Printed Sensors on Paper for Detecting Chemical Species,” Proceedings of the 2017 IEEE 67th Electronic Components and Technology Conference (ECTC), published by IEEE, pp.764-771, May 30-June 2, 2017. (CAMM, ES2) 14. M. Mohammadifar, Y. Gao, S. Choi, “An Origami-inspired Multi-cell Biobattery Stack,” IEEE Sensors 2016, pp. 1619-1621, Orlando, FL, Oct. 30-Nov. 2, 2016. (ADL) 15. M. Mohammadifar, J. Zhang, I. Yazgan, V. Kariuki, Omowunmi Sadik, S. Choi, “High Performance Paper-based Microbial Fuel Cells Using Nanostructured Polymers,” IEEE Sensors 2016, pp. 1727-1729, Orlando, FL, Oct. 30-Nov. 2, 2016. (ADL) 16. M. Mohammadifar, K. Zhang, and S. Choi, “A Saliva-powered Paper Biobattery for Disposable Biodevices,” IEEC MEMS 2017, Las Vegas, NV, pp. 121-124, Jan. 22-26, 2017. (ADL) 17. N. Pascale, R. McGinn, D. Hart, D. Muller, G. Sklar, M. D. Poliks, G. Sun, “Roll-toroll Processing and Inspection: An Analysis of Optical Defect Inspection of Aluminum Depositions on Flexible Substrates,” Proceedings of the Annual General Donald R. Keith Memorial Conference, May 4, 2017. (CAMM) 18. M. D. Poliks, Y. L. Sung, J. P. Lombardi, R. Malay, J. Dederick, C. R. Westgate, M. H. Huang, S. Garner, S. Pollard, C. Daly, “Transparent Antennas for Wireless Systems Based on Patterned Indium Tin Oxide and Flexible Glass,” Proceedings of the 2017 IEEE 67th Electronic Components and Technology Conference (ECTC), pp.1443-1448, May 30-June 2, 2017. (CAMM) 19. B. Ramakrishnan, S. Alkharabsheh, Y. Haddad, B. Sammakia, P. R. Chiarot, M. Seymour, R. Tipton, “Experimental Characterization of a Cold Plate Used in Warm Water Cooling of Data Centers,” Thermal Measurement, Modeling & Management Symposium (SEMI-THERM), pp. 191-196, March 13-17, 2017. (ES2) 20. R. R. Salary, J. P. Lombardi, P. K. Rao, M. D. Poliks, “Additive Manufacturing (AM) of Flexible Electronic Devices: Online Monitoring of 3D Line Topology in Aerosol Jet Printing Process Using Shape-from-Shading (SfS) Image Analysis,” Proceedings of ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing, Vol. 2: Additive Manufacturing Materials, June 4-8, 2017. (CAMM) 8


21. R. R. Salary, J. P. Lombardi, M. S. Tootooni, R. Donovan, P. K. Rao, P. Borgesen, M. D. Poliks, “In situ Sensor-based Monitoring and Computational Fluid Dynamics Modeling of Aerosol Jet Printing Process,” Proceedings of the 2016 Manufacturing Science and Engineering Conference, Virginia Tech, Blacksburg, VA, June 22-July 1, 2016. (CAMM) 22. Anju Sharma, Preeth Sivakumar, Andrew Feigel, In-Tae Bae, Lawrence P. Lehman, Joseph Gregor, James Cash, Joseph Kolly, “Effects of X-ray Exposure on NOR and NAND Flash Memories During High-resolution 2D and 3D X-Ray Inspection,” IMAPS 2016 – 49th International Symposium on Microelectronics, pp. 660-665, Pasadena, CA, Oct. 10-13, 2016. (ADL) 23. M. I. Tradat, H. A. Alissa, K. Nemati, S. Khalili, B. G. Sammakia, M. J. Seymour, R. Tipton, “Impact of Elevated Temperature on Data Center Operation Based on Internal and External IT Instrumentation,” Thermal Measurement, Modeling & Management Symposium (SEMI-THERM), pp. 108-114, March 2017. (ES2) 24. Haifeng Wang and Sang won Yoon, “A Machine Learning Model for Medical Image Recognition using Texture-Based Features,” Proceedings of the 2017 Industrial Systems Engineering Research Conference, pp. 20-23, Pittsburgh, PA, May 24, 2017. (IEEC) 25. X. Wei, M. Mohammadifar, W. Yang, S. Choi, “A Microscale Biophotovoltaic Device,” IEEE Sensors 2016, pp. 1613-1615, Orlando, FL, Oct. 30-Nov. 2, 2016. (ADL)

Presentations 1. Xiaoming Chen, Changhong Ke, “Nanomechanical Characterization of Interfaces in Boron Nitride and Carbon Nanotubes Polymer Nanocomposites,” ICF14, Rhodes, Greece, June 18-23, 2017. (ADL) 2. Xiaoming Chen, Changhong Ke, “Mechanical Strengths of Boron Nitride and Carbon Nanotubes Polymer Interfaces,” ASME International Mechanical Engineering Congress and Exposition, Phoenix, AZ, Aug. 5, 2016. (ADL) 3. Xiaoming Chen, Liuyang Zhang, Cheol Park, Catherine Fay, Xianqiao Wang, Changhong Ke, “Nanomechanical Strength of Boron Nitride Nanotube Polymer Interfaces,” MRS Fall Meeting, Boston, MA, Nov. 27-Dec. 2, 2016. (ADL) 4. J. Cho, R. Sheikhi, S. Mallampati, L. Yin, D. Shaddock, “Bismuth-Based Transient Liquid Phase (TLP) Bonding as High-Temperature Lead-Free Solder Alternatives,” presented at the 67th IEEE Electronic Components and Technology Conference (ECTC), Lake Buena Vista, FL, May 30-June 2, 2017. (IEEC) 5. J. Cho, R. Sheikhi, S. Mallampati, L. Yin, and D. Shaddock, “Bismuth-Based Transient Liquid Phase (TLP) Bonding,” invited presentation at the Universal Instruments – AREA Consortium Meeting, Binghamton, NY, June 14, 2017. (IEEC) 6. J. Cho, “Development of Multi-functional, Nanostructured Ceramic Coatings,” invited research seminar at Korea Institute for Advancement of Technology (KIAT), Seoul, Korea, June 26, 2017. (ADL) 9


7. Seokheun Choi, Keynote Lecture, The NSF Workshop on Papertronics: “Paper-Based Electronics for the 21st Century,” Arlington, VA, Sept. 12, 2016. (ADL) 8. Tara Dhakal, “Cu2O/Al-ZnO as a Tunneling Junction for Perovskite/Si Tandem Solar Cells,” MRS Spring 2017, Phoenix, AZ, April 17, 2017. (CASP) 9. Wayne E. Jones Jr., “Poly(3,4-ethylenedioxythiophene) (PEDOT) Infused TiO2 Nanofibers for Photocatalytic Decontamination of Mustard Gas Simulant,” American Chemical Society National Meeting, Washington, DC, Aug. 20-24, 2017. (IEEC) 10. Wayne E. Jones Jr. “Functionalizing Fibers and Textiles Workshop,” Natick Army Research Labs, June 21, 2017. (IEEC) 11. Wayne E. Jones Jr., “Nanofibrous Photocatalysts, Sensors, and Multi-functional Materials,” DoD Working Group, UCSD, San Diego, CA, March 16, 2017. (IEEC) 12. Jin Luo, Wei Zhao, Shiyao Shan, Jack Lombardi, Darshana Weerawarne, Thomas Rovere, Ning Kang, Zakiya Skeete, Yvonne Xu, Amber Vargas, Bonggu Shim, Benjamin Hsiao, Mark Poliks, Chuan-Jan Zhong, “Understanding Low-temperature Sintering and Adhesion Properties of Metal Nanoparticles Printed Sensor Devices,” ACS Fall Meeting, Philadelphia, Aug. 19-24, 2016. (CAMM) 13. M. Malik, G. J. Mahler, “The Effects of Food Additives on Gut Permeability”, Binghamton Biomedical Research Conference Bioengineering Conference. Binghamton, NY: April 1, 2017. (ADL) 14. S. Mina, J. Bramsen, B. Murray, P. Huang, G. J. Mahler, “in vitro and in silico Models of Endothelial to Mesenchymal Transformation and Tumor-Endothelial Cell Interaction,” Biomedical Engineering Society Annual Meeting. Phoenix, AZ: Oct. 14, 2017. (ADL) 15. Louis Piper, “Electronic Structure of Transition Metal Oxides,” Research Training Group Quantum Mechanical Materials QM3, Bremin University, Germany, February 2017. (NECCES) 16. Louis Piper, “What Can X-ray Spectroscopy Tell Us About Layered Li-ion Battery Cathodes?” ALS-U Workshop, ALS, Berkeley, CA, January 2017. (NECCES) 17. Louis Piper, “Shining New Light on an Old Problem in Lithium Ion Batteries,” Case Western Reserve University, Cleveland, OH, April 2017. (NECCES) 18. Mark Poliks, Invited Seminar: “Roll-to-roll Manufacturing of Electronics – From Silicon Wafers to Flexible Plastic and Glass” at University of Massachusetts, Lowell, MA, NSF Center for High-Rate Nanomanufacturing, March, 30, 2017. (CAMM) 19. Mark Poliks, Invited Panelist: “Identifying Potential Resolution to Recurring Stumbling Blocks and Barriers to Successful Collaborations” Faculty-to-Faculty Panel at 1st Multi-NYS (NYSTAR) Collaboration Symposium in Syracuse, NY, March 24, 2017. (CAMM)

10


20. M. D. Poliks, invited presentation “Roll-to-Roll Manufacturing of Flexible Hybrid Electronics: Active and Passive Device Integration on Flexible Glass Substrates,” AIMCAL Annual Meeting, Naples, FL, Oct 25-28, 2016. (CAMM) Mark Poliks, N. Pascale, R. McGinn, D. Hart, D. Muller, G. Sklar, G. Sun, Conference Presentation: “Roll-to-Roll Processing and Inspection: An Analysis of Optical Defect Inspection of Aluminum Depositions on Flexible Substrates,” Annual General Donald R. Keith Memorial Conference, West Point, NY, May 4, 2017. (CAMM) 21. Mark Poliks, Roozbeh (Ross) Salary, Jack P. Lombardi, Prahalad K. Rao, Conference Presentation: “Additive Manufacturing (AM) of Flexible Electronic Devices: Online Monitoring of 3D Line Morphology in Aerosol Jet Printing Process using Shapefrom-Shading Image Analysis,” ASME 12th Manufacturing Science and Engineering Conference, June 4-8, 2017. (CAMM) 22. Mark Poliks, “Transparent Antennas for Wireless Systems Based on Patterned Indium Tin Oxide and Flexible Glass,” IEEE 67th Electronic Components and Technology Conference (ECTC), Orlando, FL, May 30 – June 2, 2017. (CAMM) 23. Mark Poliks, “Nanoparticle Based Printed Sensors on Paper for Detecting Chemical Species,” IEEE 67th Electronic Components and Technology Conference (ECTC), Orlando, FL, May 30 – June 2, 2017. (CAMM) 24. Mark Poliks, “Roll-to-roll Processing and Inspection: An Analysis of Optical Defect Inspection of Aluminum Depositions on Flexible Substrates,” Annual General Donald R. Keith Memorial Conference, West Point, NY, May 4, 2017. (CAMM) 25. Mark Poliks, Industry and Government Forum / Luncheon, Society of Vacuum Coaters Meeting, Providence, RI, May 2, 2017. (CAMM) 26. Mark Poliks, Y. Sung, J. Lombardi, J. R. Malay, J. Dederick, J. C.R. Westgate, M. Huang, S. Garner, S. Pollard, C. Daly, Conference Presentation: “Transparent Antennas for Wireless Systems Based on Patterned Indium Tin Oxide and Flexible Glass,” 67th IEEE Electronic Components and Technology Conference (ECTC), Los Alamitos, CA, May 30 - June 2, 2017. (CAMM) 27. Mark Poliks, J. Lombardi, W. Zhao, S. Yan, N. Kang, J. Li, J. Luo, CJ Zhong, Z. Pan, M. Almihdhar, B. S. Hsiao, ML Zabran, S. S. Mittal, K. Ghose, Conference Presentation: “Nanoparticle Based Printed Sensors on Paper for Detecting Chemical Species,” 67th IEEE Electronic Components and Technology Conference (ECTC), Los Alamitos, CA, May 30-June 2, 2017. (CAMM) 28. Mark Poliks, Roozbeh (Ross) Salary, Jack P. Lombardi, Prahalad K. Rao, “Sensor-based Modeling and Monitoring of Aerosol Jet Printing (AJP) Additive Manufacturing Process,” Institute of Industrial and Systems Engineers (IISE) Annual Conference, Pittsburgh, PA, May 20-23, 2017. (CAMM)

11


29. Mark Poliks, Invited Presentation and Panelist for the Industry-Government Forum at the Society of Vacuum Coaters (SVC) TECHCON 2017, 60th Annual Technical Conference, Rhode Island Convention Center, Providence, RI, April 29 to May 4, 2017. Besides Poliks, the panel also included Deputy Director of Advanced Manufacturing National Program Office (at NIST), the COO of Advanced Functional Fabrics of America (AFFOA), the acting program manager for the Technology to Market division of the U.S. DOE SunShot Initiative. (CAMM) 30. R. Sheikhi, S. Mallampati, R. Tobias, J. Cho, “Development of Transient Liquid Phase (TLP) Bonding as a High-Temperature Pb-Free Alternative,” presented at the Electronics Packaging Symposium, Binghamton, NY, Oct. 6-7, 2016. (IEEC) 31. J. H. Shim, T. Tao, J. Joshi, K. Sauer, J. Cho, “Nanostructured Ceramic Coatings for Photocatalytic and Antimicrobial Surfaces,” Collaborative Conference on Materials Research (CCMR) 2017, Jeju Island, Korea, June 26-30, 2017. (ADL) 32. James Turner, “A Flexible Hybrid Electronics (FHE) Wearable Biometric Human Performance Monitor (BHPM),” FlexTech Conference, Exhibit Demonstration, Monterey CA, June 19-22, 2017. (CAMM, IEEC, ADL) 33. James N. Turner, Madina Zabran, Sandeep Mittal, Jenny Pawlak, Yang Gao, Varun Soman, Hussam Alothman, Jack Lombardi, Pravakar Rajbhandari, Benson Chan, Kanad Ghose, Mark Poliks, Zhanpeng Jin, Tara Dhakal, Mark Schadt, Frank Egitto, Paul Hart, William Wilson, Kostas Papathomas, Michael Gaige, Robert Welte, Yasser Khan, Donggeon Han, Natasha A. D. Yamamoto, Ana Arias, Dale Wilson, “A Flexible Hybrid Electronics Wearable Biometric Human Performance Monitor,” Flexi Conference, Monterey, CA, June 19-22, 2017. (CAMM, IEEC, ADL) 34. Madina Zabran, Sandeep Mittal, Jenny Pawlak, Yang Gao, Varun Soman, Hussam Alothman, Jack Lombardi, Pravakar Rajbhandari, Benson Chan, Kanad Ghose, Mark Poliks, Zhanpeng Jin, Tara Dhakal, Mark Schadt, Frank Egitto, Paul Hart, William Wilson, Kostas Papathomas, Michael Gaige, Robert Welte, Yasser Khan, Donggeon Han, Natasha A. D. Yamamoto, Ana Arias, Dale Wilson, James N. Turner, “Architecture and Assessment of a Wearable Biometric Human Performance Monitor (BHPM),” Flexi Conference, Monterey, CA, June 19-22, 2017. (CAMM, IEEC, ADL)

Poster Presentations 1. J. Bramsen, B. Alber, S. Dahal, C. Ghazvini, B. Murray, P. Huang, G. J. Mahler, “Chondroitin Sulfate Promotes Calcification in Aortic Valve Interstitial Cells,” Northeast Regional Bioengineering Conference (NEBEC). Newark, NJ: April 1, 2017. (ADL) 2. Tara Dhakal, “CVD Deposited Carbon Nanotubes as Electrode Material for Supercapacitor Applications,” MRS spring Conference, Phoenix, AZ, April 17, 2017. (CASP)

12


3. C. Han, J. S. Goodwine, F. I. Leslie, K. Sauer, A. L. Doiron, “Enzyme Immobilized in Poly(lactic-Co-Glycolic Acid) Nanoparticles Showed Extended Activity Against Pseudomonas aeruginosa biofilms,” Northeast Biomedical Engineering Conference (NEBEC), Newark, NJ, April 1, 2017. (ADL) 4. Y. Liu, C. Maiorana, K. Harada, B. Lappies, L. Jarett, N. Rogel, G. German, G. Mahler, A. L. Doiron, “The Impact of Gold Nanoparticle Exposure on Endothelial Cells,” Science-to-Technology (S2T) Day, Binghamton, NY, Nov. 18, 2016. *Best poster award. (ADL) 5. Y. Liu, C. Maiorana, K. Harada, B. Lappies, L. Jarett, L., N. Rogel, G. German, G. Mahler, SA. L. Doiron, “The Impact of Gold Nanoparticle Exposure on Endothelial Cells,” American Chemical Society (ACS) Northeast Regional Meeting (NERM), Binghamton, NY, Oct. 6, 2016. (ADL) 6. M. Mahan, D. Goldstein, D. Eversole, T. Meredith, S. Pantanelli, A. L. Doiron, “Antibody-Conjugated Gold Nanoparticles for Targeted Treatment of Microbial Keratitis,” Northeast Biomedical Engineering Conference (NEBEC), Newark, NJ, April 1, 2017. (ADL) 7. B. Philip, C. Sakolish, G. J. Mahler, “Improving a Microfluidic Device to Mimic Renal Physiology for Drug Modeling,” Northeast Regional Bioengineering Conference (NEBEC). Newark, NJ: April 1, 2017. (ADL) 8. R. Sheikhi, S. Mallampati, R. Tobias, J. Cho, “Bismuth-Nickel Transient Liquid Phase Bonds for High Temperature Electronics,” 2016 MRS Fall Meeting & Exhibit, Boston, MA, Nov. 27 – Dec. 2, 2016 (IEEC) 9. R. Sheikhi, S. Mallampati, R. Tobias, J. Cho, “Development of Transient Liquid Phase (TLP) Bonding,” 1st Multi-CAT Collaboration Symposium, Syracuse, NY, March 22 – 24, 2017. (IEEC) 10. T. Tao, J. H. Shim, J. Joshi, K. Sauer, J. Cho, “Tailoring of Solution Grown TiO2 and ZnO Nanostructures for Photoactive Performances,” 2016 MRS Fall Meeting & Exhibit, Boston, MA, Nov. 27 – Dec. 2, 2016. (ADL) 11. E. Yoo, D. Beaman, L. Nardacci, C. Lee, H. Cheng, O. Fisher, A. Doiron, (2016, Oct 6). “Activatable Interpolymer Complex-Superparamagnetic Iron Oxide Nanoparticles (IPCSPIOs) as Magnetic Resonance (MR) Contrast Agents Sensitive to Oxidative Stress,” American Chemical Society (ACS) Northeast Regional Meeting (NERM), Binghamton, NY, Oct. 6, 2016. (ADL) 12. E. Yoo, D. Beaman, L. Nardacci, C. Lee, H. Cheng, O. Fisher, A. Doiron, “Design of Switchable Magnetic Resonance Imaging Agents Sensitive to Oxidative Stress Based on Interpolymer Complex-Superparamagnetic Iron Oxide Nanoparticles,” (IPC-SPIOs), poster presented at World Molecular Imaging Congress (WMIC), New York, NY, Sept. 9, 2016. (ADL)

13


binghamton.edu/s3ip

Profile for Division of Research @ Binghamton University

Binghamton University / S3IP Publication List 2016-17  

S3IP, a New York State Center of Excellence, highlights its researchers’ publications and presentations in this annual list.

Binghamton University / S3IP Publication List 2016-17  

S3IP, a New York State Center of Excellence, highlights its researchers’ publications and presentations in this annual list.

Advertisement