Enhanced Functional Features

The Mini Stockman box with drawers gives you many of the same great features as its larger model. It features a top lid that opens to the top shelf basin, perfect for storing small items. This lid now allows you to open fully while hanging against a wall or gate. The front door is held closed with a new magnet design and opens to the 4” and 7.7” drawers. This door now allows you to open while the box is sitting on the floor or a table. This box is constructed of smooth aluminum and coated in our hammertone black coating.

Dimensions: LxWxH - 24x13x20

STOMD - With Drawer, 32lbs. $399.95

** Packaging charge of $15.00.

The Mini Stockman box with shelves gives you many of the same great features as its larger model. It features a top lid that opens to the top shelf basin, perfect for storing small items. This lid now allows you to open fully while hanging against a wall or gate. The front door is held closed with a new magnet design and opens to the shelf area. This door now allows you to open while the box is sitting on the floor or a table. The open space is tall enough for pump up sprayers while the shelves are perfect for brushes and other small items. This box is constructed of smooth aluminum and coated in our hammertone black coating.

Dimensions: LxWxH - 24x13x20

STOM - with shelf, 24 lbs. $379.75

** Packaging charge of $15.00.

NEW FEATURES

NEW FEATURES

• Innovative design AVAILABLE IN TWO SIZES.

• 20 gauge Powder Coated steel with reinforced sides.

• Pig whip holders.

• Tray for small equipment.

• Features a large handle on each end and one on top.

• Chain and hook assembly allows you to hang it almost anywhere.

• Great for one day jackpot shows.

SCL - Large, 51 ¼” L x 8 ½” W x 16 ¼” H”, 38 lbs. $325.50

SCD - Deep, 46” L x 11 ¾” W x 16 ¼” H, 40 lbs. $365.50

SCDD - Deep w/ drawer, 46” L x 11 ¾” W x 16 ¼” H, 40 lbs. $385.50

** Packaging charge of $15.00.

Made of durable diamond treadbrite aluminum to create a lightweight box with a scratch resistant surface. Designed with all the same great features as the Deep Galvanized Steel Showcase Box featured above.

ASSD - deep, treadbrite pattern, , 32 lbs. $445.50

W x 16 ¼” H

** Packaging Charge $15.00

This handy, smaller box enables you to carry the basic essential supplies to shows when a large box is not necessary. Features one handle on top for easy carrying. The Air Express Mini Blower dryer will fit inside of this box. Constructed of 20 gauge powder coated steel.

SCM - Mini, 128” L x 11 ¾” x 16 ¼” H, 32 lbs. $273.95

** Packaging Charge $15.00

A great product to hang your Showcase Show Box for maximum organization. Now availalable in both steel and a convenient lightweight, aluminum. Features a shelf on top to hold many items. An optional second shelf can be purchased to hang above or below the show box. The height is adjustable. Show box sold separate.

SSBH - Steel Showcase Show Box Hanger, 52 lbs. $215.50

SSBHS - Steel Optional Second Shelf, 25 lbs. $145.50

ASSBH - Aluminum Showcase Show Box Hanger, 30 lbs. $325.50

ASSBHS - Aluminum Optional Second Shelf, 16 lbs. $189.99

** $12 out of box fee

RSH - Steel Ranch Sign Holder

Stall Dividers & Ranch Sign Holders sold separately.

FCLBH - Steel Fan Cage L-Bar

CAGEHBSteel Head Tie Bracket

ACAGEHBAluminum Head Tie Bracket

ARSHAluminum Ranch Sign Holder

AFCLBHAluminum Fan Cage L-Bar

SFGSullivan’s Smart Fork other items sold separately

SDF - Steel Stall Divider Feet

The design of the breeders display will enhance your cattle and bring respect to your ranch name.

SD - steel stall divider , 60 lbs. $299.50/ each

96” long x 42” tall x 30” tall x 1 3/4” wide

** F.O.B. Motor Freight ** $30 packing charge

SSD - Steel Shorty Stall Dividers, 30 lbs. $232.50/ each 48" x 43" x 44" * F.O.B. Motor Freight

SSDBT - Shorty Stall Divider Bracket - Top $38.50/each

SSDBB - Shorty Stall Divider Bracket - Bottom $38.50/each

RSH - steel ranch sign holder, 18 lbs. $59.50

$20 Out of Box Fee

SDF - stall divider feet, 1 lb. $17.25/ each

BHTD - Breeders Head Tie, 60 lbs. $339.50

ET8S- 8 Ft. Steel Extension- 1 $48.99

FCLBH- Fan Cage Headtie L Bar Steel(set of 2)- 1 $214.50

CAGEHB- Headtie Only For Fan Cage- 2 $22.50/each

LB- Black Knob- 4 $7.95/each

Extension package used to double the size of your Fan Cage.

BHTE - Breeders Headtie extension steel, 60 lbs. $309.75

** F.O.B. Motor Freight. $30 Packing Charge

ET8S- 8 Ft. Steel Extension Tube- 1 $48.99

ET6S - 6 Ft. Steel Extension Tube- 1 $42.50

CAGEHB - Headtie Bracket only for Fan Cage- 2 $22.50/each

BFS - Big Foot Steel, Fan Cage Ext- 1 $17.25

LB - Black Knob- 4 $7.95/each

TBH T Bar With Headtie Steel- 1 $121.50

LBBlack Knob for Fan Stand /Cage

LBBlack Knob for Fan Stand /Cage

SSDA - Aluminum Shorty Stall Divider(Sold Separately) (also available in steel)

ASDAluminum Stall Divider

ASDFAluminum Stall Divider Feet

The design of the breeders display will enhance your cattle and bring respect to your ranch name.

ASD - aluminum stall divider , 45 lbs. $419.99/ each

96” long x 42” tall x 30” tall x 1 1/16” wide ** F.O.B. Motor Freight ** $30 packing charge

SSDA - Aluminum Shorty Stall Dividers , 18 lb. $279.50/ each

48" x 43" x 44" ** F.O.B. Motor Freight.

ASDBT - Shorty Stall Divider Bracket - Top $48.50/each

ASDBB - Shorty Stall Divider Bracket - Bottom $48.50/each

ARSH - aluminum ranch sign holder, 10 lbs. $69.95

$20 Out of Box Fee

ASDF - aluminum stall divider feet, 1 lb. $18.50/each

ABHTD - aluminum Breeders Head Tie, 60 lbs. $389.95

Included

ACAGEHB- Aluminum Headtie Bracket- 2 $28.50 each

ET8A- 8 Ft. Aluminum Extension Tube- 1 $61.50

AFCLBH- Aluminum Fan Cage L Bar(set of 2)- 1 $239.75

LB- Black Knob- 4 $7.95/each

™ Aluminum

Extension package used to double the size of your Fan Cage.

ABHTE - Breeders Headtie extension Aluminum, 40 lbs. $363.50

** F.O.B. Motor Freight. $30 Packing Charge

ET8A- 8Ft Aluminum Extension Tube- 1 $61.50

ATBH - Alum T Bar with Headtie- 1 $142.50

ET6A - 6 Ft. Aluminum Extension Tube- 1 $57.50

BFA - Big Foot Alum, Fan Cage Ext- 1 $18.50

LB - Black Knob- 4 $7.95/each

ACAGEHB - Aluminum Headtie Bracket for Fan Cage- 2 $28.50

FCLBH - Steel Fan Cage L-Bar

ACAGEFBAluminum Fan Bracket

CAGEFBSteel Fan Bracket

FCLBHSteel Fan Cage L-Bar

Steel and Aluminum parts are NOT interchangeable.

ACAGEHBAluminum Head Tie Bracket

CAGEHBSteel Head Tie Bracket

CAGE1 - Sullivan’s Steel Fan Cage Fans sold separately, otherwise complete as shown

LBBlack Knob for Fan Stand /Cage

AFCLBHAluminum Fan Cage L-Bar

AFCLBFAluminum Fan Cage Bracket L

SD - Steel Stall Divider

SDF - Steel Stall Divider Feet

SSD - Steel Shorty Stall Divider (Sold Separately) (also available in aluminum) See page 93.

A complete professional setup. The height at the front of the fan cage is 6’2” and the height at the back is 6’7” tall. Stall dividers are 8’ long. Fan cage is made of square tubing for long lasting durability. Simple to setup and break down. Easy to haul. High quality!

CAGE1 - steel fan cage, 240 lbs.

** F.O.B. Motor Freight. $30 Packing Charge

$1,299.95

SD - Steel Stall Divider- 2 $299.50/each

CAGEFB- Fan Bracket only for fan Cage- 2 $22.50/each

CAGEHB- Headtie Bracket only for fan cage- 2 $22.50/each

SDF- Stall Divider Feet- STEEL- 4 $17.25/each

ET8S- 8 Ft Steel Extension Tube- 2 $48.99/each

FCLBF- Fan Cage Fan bracket L Bar Steel Set of 2- 1 $218.75

FCLBH- Fan Cage Headtie L bar Steel set of 2- 1 $214.50

LB- Black Knob- 8 $7.95/each

Rear Fan Cage Assembly is the back portion of fan cage to hang fans.

RFCA - steel, 60 lbs.

** F.O.B. Motor Freight. $30 Packing Charge

$338.75

ET8S- 8 Ft. Steel Extension- 1 $48.99

FCLBH- Fan Cage Headtie L Bar Steel- 1 $214.50

CAGEHB- Headtie Only For Fan Cage- 2 $22.50/each

LB- Black Knob- 4

ASDAluminum Stall Divider

ASDFAluminum Stall Divider Feet

A complete professional setup. Extends from 8’ to 15’ and will hold (1) to (4) head. The height at the front of the fan cage is 6’2” and the height at the back is 6’7” tall. Stall dividers are 8’ long. Fan cage is made of square tubing for long lasting durability. Simple to setup and break down. Easy to haul. High quality!

ACAGE1 - aluminum fan cage, 180 lbs. $1,369.50 ** F.O.B. Motor Freight. $30 Packing Charge

ASD- Aluminum Stall Divider- 2 $419.99/each

ET8A - 8 Ft Aluminum Extension Tube- 2 $61.50/each

LB- Black Knob- 8 $7.95/each

AFCLBF - Alum Fan Cage Fan Bracket L bar set of two- 1 $249.75

AFCLBH - Alum Fan Cage Headtie L Bar set of two- 1 $239.75

ASDF - Stall Divider feet- Aluminum- 4 $18.50/each

ACAGEFB - Aluminum fan bracket only for fan cage- 2 $28.50

ACAGEHB - Aluminum headtie Bracket for fan cage- 2 $28.50

Rear Fan Cage Assembly is the back portion of fan cage to hang fans.

ARFCA - aluminum, 25 lbs. $384.50

** F.O.B. Motor Freight. $30 Packing Charge

ET8A- 8 Ft. Aluminum Extension- 1 $61.50

AFCLBF- Fan Cage Headtie L Bar Aluminum- 1 $249.75

ACAGEFB- Headtie Only For Fan Cage- 2 $28.50/each

LB- Black Knob- 4 $7.95/each

ET6S - 6ft

Extension package used to double the size of your Fan Cage.

CAGE2 - Steel Fan Cage extension, 60 lbs. $610.95

TBH- T Bar with headtie Steel- 1 $121.50/each

BFS - Big Foot steel, fan cage ext- 2 $17.25/each

ET6S - 6 Ft Steel extension Tube- 2 $42.50/each

ET8S - 8 Ft steel extension Tube- 2 $48.99/each

CAGEFB - Fan bracket only for Fan cage- 2 $22.50/each

CAGEHB - Headtie bracket only for Fan cage- 2 $22.50/each

LB - Black Knob- 8 $7.95/each

TBF - T Bar with fan bracket Steel- 1 $121.75/each

Extension package used to double the size of your Fan Cage.

ACAGE2 - Aluminum Fan Cage extension, 40 lbs. $725.50 ** F.O.B. Motor Freight. $30 Packing Charge

ET8A- 8ft Aluminum Extension Tube- 2 $61.50/each

ET6A- 6ft Aluminum Extension Tube- 2 $57.50/each

BFA- Big foot Aluminum- 2 $18.50/each

ATBF- Aluminum T bar with fan bracket- 1 $142.50/each

ATBH- Aluminum T bar with Headtie- 1 $142.50/each

ACAGEFB- Aluminum fan bracket only for fan cage- 2 $28.50/each

ACAGEHB- Aluminum headtie Bracket for fan cage- 2 $28.50/each

LB- Black Knobs- 8 $7.95/each

Black Knob for Fan Stand/Cage

Threaded knob to adjust and secure various Sullivan’s Fan stands and Fan Cage equipment.

LB - 1 oz. $7.95

Ranch Sign Holder Attachment

Easily attaches to the upright of the fan cage providing a convenient place to hold a Ranch Sign Holder.

RSHA - steel, 3 lbs. $32.50

ARSHA - aluminum, 3 lbs. $38.50

Fork Holder Attachment

Easily attaches to the upright of the fan cage providing a convenient place to hold forks and brooms.

FHA - 3 lbs. $32.50

These solid cast aluminum ties are a necessity for show barns and trailers. Simply attach with (2) 5/16” bolts.

TL - 1 lb. $8.95

Attachment for hanging fans on the sides of the fan cage. Available in steel or aluminum. $20 Out of Box Fee.

SFCA - steel, 15 lbs. (pictured) $98.25

ASFCA - aluminum, 11 lbs. $142.25

Headtie Bracket

Replacement Headtie Bracket for Fan cage.

CAGEHB - 1 lb. $22.50

Fan Bracket

Replacement Fan Bracket for Fan cage.

CAGEFB - 1 lb. $22.50

Extension Tube 6ft or 8 ft. long - 1-1/2” square (pictured w/ fan bracket above). $20 Out of Box Fee.

ET8S - steel, 12 lbs. $48.99

ET8A - aluminum, 7 lbs. $61.50

Aluminum Fan Hanger

Aluminum “L” bar fan hanger allows you to hang your fans on your stall divider or head panel.

ALFH - 12 lbs. $20 Out of Box Fee $128.50

These front panels are a great way to customize your stall display. Functional and fancy! Use anywhere - in the barn or out at the tie-outs. Side Stall Dividers securely fasten to these front panels to create a sturdy tie for your cattle at any height. (Stall dividers sold separately on page 95.) The Sullivan Steel or Aluminum Stall Dividers will easily attach to the panels.

Height of each panel is 66”. Constructed of durable aluminum tubing. Solid aluminum sheeting at the bottom prevents bedding from pushing through. Available in three different length panels:

1) Solid 4 foot long panel. 2) Solid 8 foot long panel.

3) Expandable panel that telescopes from 5 foot to 8 foot in length. Adjusts in length for almost any stall size. Accessories sold separately include: movable head-tie loop bracket, fan stand bracket to attach your upright fan stand. Sets up or tear down in minutes. Very convenient.

AFP4 - 4’ panel , 35 lbs.

Includes: AFPCB- C bracket for aluminum front panel- 4

AFP8 - 8 foot fixed length panel, 53 lbs.

Includes: AFPCB- C bracket for aluminum front panel- 4

AFP58 - Expandable 5’ to 8’ length panel, 70 lbs.

** $30 Packing Charge for both AFP8 & AFP58

Includes: AFPCB- C bracket for aluminum front panel- 4 $35.50/each

LB- Black Knobs- 2 $7.95/each

Accessories:

AFPHT - Head-tie bracket, 2 lbs.

AFPCB - “C” attachment bracket, 1 lb.

AFPFB - Upright fan stand bracket, 1

Single Head Tie

Easily nails to a wall to enable you to tie the head up. Each headtie will tie one head. 6’ Bar

SSHT - 12 lbs. $79.50

**$12 Out of Box Fee

by Amos Welding

The Extenz bars slide over the end of our straight up bars. This give you the freedom of choosing the length that works best for the size of cattle you have. With the Extenz you have a range from 42” all the wall out to 54”. The Extenz will accommodate the growth of your cattle. With just a turn of the set screw you lock the Extenz down at your desire length.

Straight Up Bars sold separately

Safely groom your cattle in the stall. New hybrid material design with many updated features.

The new design of the aluminum front upright features five horizontal cross bars resembling the functional design of an aluminum front stall panel. This enables numerous tie location heights. It also allows for you to attach Straight Up bars. Measures 66” tall x 42” wide.

•Black powder coated round aluminum side bar restraints.

•A new, reinforced adjustable base is constructed of steel tubing to prevent breakage. Strengthened in all stress points.

•Base easily adjusts in length from 18” to 46” away from the front upright to the perfect side bar location for all sized cattle. The adjustable length base is safer for cattle hooves

•When not in use, the base can be folded up, out of the way.

•Easy set up. Simply attaches to the front of barn stall or trailer with Handi Straps. Must be secured in place before use. Folds easily for easy transport.

•For use only on broke animals.

FG2 – Fitters Guard 2, 54 lbs. $589.50

** F.O.B. Motor Freight - Freight quotes available upon request. $30 Packing

Optional Add-ons: Light Hangers

Three optional Light Bar Hangers have been designed that will insert into the top of the front upright. Simply attach your LED light (sold separately), for the ultimate Fitters Guard set up.

Fitters Guard 2 Light Hanger – Left Wing , 6 lbs., $59.75

Fitters Guard 2 Light Hanger – Right Wing , 6 lbs., $59.75

FG2LM -Fitters Guard 2 Light Hanger – Middle , 6 lbs., $59.75

Light Hangers sold separately

by Amos Welding

Convenient and easy to use, the Straight Up Bars by Amos Welding make working on your animal in the stall a breeze. While the metal bars keep your animal from moving side to side, they also easily lift up and lock in place to allow more access to your animal. Each purchase comes with 2 identical Straight Up Bars. Available in Black. Patent Pending. Exclusively at Sullivan Supply and Sullivan Supply Authorized Dealers.

SUB - Set of 2 32 lbs.

$348.50

Sullivan’s Fitters Guard was designed for fitters in mind. This guard allows you to fit your animal in the stall while keeping them standing still and you protected. This easy to assemble stall fitting guard is quick to install and easy to adjust at any time. Adjustments include the width adjustments of 34” OD-44” OD length adjustments from 34” OD – 57” OD and side bar adjustments 30” – 50”. It quickly folds up for a space saving storage mode. For use only on animals that are broke and are used to being groomed. Do not use without securing it to front panels.

FG - Fitters Guard, Aluminum 42 lbs. $589.50

** F.O.B. Motor Freight - Freight quotes available upon request. $30 Packing Charge

The folding Stall Divider Mat provides protection against injury, rubbing, and dirt/color transfer onto the animal. A valuable tool for all cattle, but especially for light colored cattle and slick sheared cattle. Designed to match the exact shape & size of an 8ft long stall divider. Measures: 93” long, 36” tall at front of divider, 24” tall at short end of divider. Attaches easily with straps along the top and at each end of the divider. This mat is covered in vinyl for a nice, finished appearance that is easy to clean. Folds in two places to make for easy hauling.

SDM - 10 lbs.

This light weight easy to carry mat provides excel lent comfort for your animals, whether it’s at home or at a show. The drainage holes allow water to pass through it keeping your animals dry.

DC5 - 3’ x 5’ rubber mat, 12 lbs. $70.99

Works well for display cattle. Place in front half of the stall to prevent cattle from pawing up bedding. Also excellent as a trailer mat.

RM22 - 22’ long x 36”, 130 lbs. $198.50

$20 Out of Box Fee

RM11 - 11’ long x 36”, 65 lbs. $105.50

$20 Out of Box Fee

RM5 - 5-1/2’ long x 36”, 33 lbs. $70.99

$20 Out of Box Fee

Keep debris and other foreign objects out of your stalls with Sullivan’s Stall Divider Covers. These Covers keep things out while also allowing air to flow through.

Durable Mesh Fabric. Easy to Apply . Fits All Standard Sized Sullivan Supply Stall Dividers. Keeps Animals Hair Free of Aluminum Stains

SDC* - 3 lbs. $69.50

*PU - Purple

No more wire, pliers or cutters needed with these Handi Straps. Sullivan’s Handi Strap comes in 2’ & 3’ lengths.

STRP24 - 2’ Handi Strap, 4 oz. $6.75

STRP36 - 3’ Handi Strap, 5 oz. $6.75

Sullivan’s Head Panel Tarps conveniently connect to your head panels giving your animal less stress by blocking the view of other animals or visitors. Tarps are made of a durable vinyl material with brass grommets for securing.

Available in 8’. Vertical Measurement of 50”. Black Only.

TARP8 - 8ft, 2 lbs. $89.25

Super Convenient! Ideal for carrying clumsy, heavy rolled up stall mats. Each end adjusts to fit up to a 10” diameter roll. Rated up to 80lbs capacity. Included padded shoulder strap for added comfort.

MAC - 2 lbs. $19.50

Display poles used to hang Curtains and Pedigree Signs. Side uprights stand 8’ tall and are made of 1½” tubing. Each telescoping top bar extends from 8’ to 14’. Curtains and Signs sold separately.

ADTB - telescoping top bar, 5 lbs. $59.75

ADSU - 8’ tall uprights (each side), 3 lbs. $49.50

ADB - base for each upright, 6 lbs. $29.95

** Per FedEx regulations, Aluminum Display Poles are shipped as oversize packages using dimensional weight. **$12 Out of Box Fee

Curtains add a finishing touch to any display. Acts as a backdrop for pedigree signs in the front of your stall. Fits onto the Aluminum Display Poles featured above. Available in black only.

CU - 10’ long x 26” deep, 2 lbs.

$68.50

The most functional, well designed fork in the show cattle industry.

SFG - Smart Fork, 4 lbs. $24.50

Comfortable grip on a wood handle.

With a reinforced attachment point, you will see no more breakage as seen in previous forks.

Barn Fresh contains soil- derived microbes and metabolites to naturally break down the proteins, salts, and other materials found in urine and fecal matter that cause unpleasant odors such as ammonia. Use in livestock pens, barns, horse stalls, and anywhere else animals are held. Visit www.sullivansupply.com for directions.

BFQ - Quart 2.2 lbs. $26.50

BFG - Gallon 8.85 lbs. $98.50

A slightly deeper basket with a reinforced back stop and raised sides. Quality, unbreakable, impact resistant basket.

A must for cooler rooms and all livestock stalls! This natural, dry granulated product is sprinkled on your bedding to absorb and eliminate the worst smells, even ammonia from urine. Creates better air quality in stall areas which translates into fresher hair and better overall health. Contains Citronella for fly control. A tremendous daily care product.

SF - 11 lbs. $36.50

Natural, anti-microbial drying agent used to neutralize odors and enhance overall air quality for superior livestock comfort.

ESS - 2.75 lbs. $14.25

Wonder Fork

Pedigree Signs (Plexi-glass)

This durable and reusable sign includes name, sire, dam, date of birth and owner. Black print on white background.

PSB - 12” x 18”, 1 lb. $29.95

Cardboard sign (not pictured) is 1 mm thick and has same printed information as the sign pictured above.

PSC - 12” x 18”, 8 oz. $9.75

MAR - 6 oz. $2.95

Allows you to hang your pedigree signs from a wire or pole.

HAN - 1 oz. $.80

- Pack of 12 $8.50

This popular 10 tine fork is constructed with steel pitch fork tines.

WF - 4 lbs. $69.50

WFWonder Fork

A heavy duty square point shovel with a long wood handle.

SHO - 4 lbs. $24.50

Broom

A top quality 24” broom for all purposes.

BRO - 4 lbs. $29.50

SHOShovel BROBroom