SUPERIORBUS - Sample Drawing Package - Spanish

MUESTRA DE KIT DE DIBUJOS DE CABLEBÚS. ™

i

superiorbus.mxIntegridad, Integridad, Ingenio, Innovación Ingenio, Innovación

9001:201 5 ISO

C

ER

T I F I C AT I O

N

TM

LÍDERES EN LA INDUSTRIA DE CABLEBÚS Introducción I. II.

™

1 2-5 5-18 6 7 8 9 10 11 12

Plano de diseño

™

Componentes y Accesorios Caja del Transformador Accesorios Horizontales de Radio Estándar de 24” Accesorios Internos Verticales de Radio Estándar de 24” Accesorios Externos Verticales de Radio Estándar de 24” SS Accesorio Horizontal SS Accesorio Interior Vertical SS Vertical Inside Fitting

13 14 15

SS Accesorio Cuello Cisne Vertical Sellador Hermético de Equipo, Sistema 18x8 Sello para Muro Seco, Acero Inoxidable Sello Cortafuegos para Muro Seco/Placa de Piso, Sistema 18x8 Placa de Apoyo III. Dibujo con Especificaciones del Sistema Dibujo con Especificaciones del Sistema de Aluminio Dibujo con Especificaciones del Sistema de Acero Inoxidable ™

IV. Análisis de Especificaciones del Sistema Análisis Térmico Análisis Eléctrico Análisis EMF / EMI IV. Información Adicional

ii

Integridad, Ingenio, Innovación

™

16 18 19-20 19 20 21-24 21 22 23 24 25

Muestra de paquete de dibujos ™ de SuperiorBus SuperiorBus™ es más que un sistema de alta distribución eléctrica. Nuestro SuperiorBus™ es fácil de instalar y cuenta con certificación CSA y UL. Para nosotros en Superior Tray, nuestro objetivo principal es la satisfacción de nuestros clientes.

Escuchamos sus requerimientos, le ayudamos a diseñar el esquema del sistema y proporcionamos soluciones tecnológicamente diseñadas a la medida, lo que hace el proceso de instalación mucho más fácil y económico.

Un paquete de dibujos hechos a la medida es enviado junto con cada sistema SuperiorBusTM. Cada paquete incluye dibujos de ingeniería y diseño de cablebús, así como dibujos con especificaciones del sistema SuperiorBusTM, junto con los resultados del análisis de elementos finitos (FEA) del sistema. En este paquete de dibujos de muestra, se puede ver un ejemplo del sistema SuperiorBusTM.

Para mayor información, contáctenos al: Tel: +1 604.572.4419 Email: info@superiortray.com

™

S u peri orB u s.mx | 6 0 4 . 5 7 2 . 4 4 1 9

1

2

Integridad, Ingenio, Innovación

20

15

6

21

2

22

1

7

8

18

4

19

5

9

23

25

CABLE BUS IS STAINLESS STEEL AFTER WALL

11

10

5

25

12

27

30

31

26

30 38

14

38

39

13

32 27

33

DESIGNED AND MADE IN NORTH AMERICA.

40

ITEMS 45 AND 46 LOCATED ON BACK SIDE OF WALL

CABLE BUS IS ALUMINUM INSIDE BUILDING

ISOMETRIC SCALE 1/75

CABLE BUS ENTERS TRENCH AT THIS POINT

24

19

30

42

29

35

29

44

37

36

43

CABLE BUS EXITS TRENCH AT THIS POINT

38

34

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

28

1 1 1

10 11

1 1 1 2 1 2 1 2 3 1 1 1 1 1 1 1

31 32 33 34 35 36

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

3 1 1 1 1 1 1 1 1

1 2 1 1

18 19 20 21 22 23 24 25 26 27 28 29 30

37 38 39 40 41 42 43 44 45 46

1 1

15 17

1

1 1 1

7 8 9

14

1 2 1

2

1 1 1

1 2 3 4 5 6

12 13

QTY

ITEM

PH 604-572-4419 FX 604-572-4416

DESCRIPTION

CABLE BUS LAYOUT

XXXX-01-00 DRAWN K.LYNES

PART NO. DESIGNED K.LYNES

CHECKED M.COX

SAMPLE TITLE

APPROVED M.COX

1 4

DATE

XXXX

W.O.

SHEET

VENTILATED COVERS SHOWN AS SOLID FOR CLARITY. CABLE BUS COMPONENTS NOT LABELED AS STAINLESS ARE ALUMINUM FOR SAMPLE ONLY, NOT FOR PRODUCTION

NOTES

SS CABLE BUS SECTION 42.391" [1077] SS STRAIGHT SECTION COVER SS STRAIGHT SECTION COVER SS STRAIGHT SECTION COVER SS STRAIGHT SECTION COVER SS STRAIGHT SECTION COVER SS STRAIGHT SECTION COVER SS STRAIGHT SECTION COVER BACKING PLATE BACKING PLATE

SS TRANSFORMER ENCLOSURE

SS CABLE BUS SECTION 118" [2997] SS CABLE BUS SECTION 12.296" [312] SS CABLE BUS SECTION 74" [1880] SS CABLE BUS SECTION 41.948" [1065] SS CABLE BUS SECTION 6.405" [163] SS CABLE BUS SECTION 23.405" [594]

ASSEMBLED VERTICAL OUTSIDE FITTING COVER VERTICAL INSIDE FITTING COVER ASSEMBLED VERTICAL OUTSIDE FITTING COVER HORIZONTAL FITTING COVER STRAIGHT SECTION COVER STRAIGHT SECTION COVER STRAIGHT SECTION COVER STRAIGHT SECTION COVER STRAIGHT SECTION COVER STRAIGHT SECTION COVER STRAIGHT SECTION COVER SS VERTICAL INSIDE FITTING SS VERTICAL OUTSIDE FITTING SS HORIZONTAL FITTING

DRY WALL SEAL WITH FIRESTOP - STAINLESS

CABLE BUS SECTION 38.75" SS VERTICAL SWAN NECK FITTING

CABLE BUS SECTION 54" CABLE BUS SECTION 288"

CABLE BUS SECTION 11.574" CABLE BUS SECTION 9.34" CABLE BUS SECTION 83.188"

DRY EQUIPMENT SEAL VERTICAL OUTSIDE CABLE BUS FITTING VERTICAL INSIDE CABLE BUS FITTING VERTICAL OUTSIDE CABLE BUS FITTING HORIZONTAL FITTING CABLE BUS SECTION 24.23"

PROJECT

3.

2.

1.

CBSS6-18-8-42.391 CBSS6-18-8-118-C CBSS6-18-8-12.296-C CBSS6-18-8-74-C CBSS6-18-8-41.948-C CBSS6-18-8-6.405-C CBSS6-18-8-23.405-C CBSS6-18-8-42.391-C WS-BPR-18-8-1 WS-BPL-18-8-1

XXXX-40-00

CBSS6-18-8-23.405

CBSS6-18-8-12.296 CBSS6-18-8-74 CBSS6-18-8-41.948 CBSS6-18-8-6.405

AXEV-VO-45-18-7.625-24-C AXEV-VI-45-18-7.625-24-C AXEV-VO-90-18-7.625-24-C AXEV-H-90-18-7.625-C AXEV-18-7.625-24.23-C AXEV-18-7.625-11.574-C AXEV-18-7.625-9.34-C AXEV-18-7.625-83.187-C AXEV-18-7.625-54-C AXEV-18-7.625-144-C AXEV-18-7.625-38.75-C CBSS6-VI-90D-18-8-24R CBSS6-VO-90D-18-8-24R CBSS6-HO-45D-18-8-24R CBSS6-18-8-118

DWSF-18-8-116-SS

AXEV-18-7.625-38.75 CBSS6-VO-90D-18-8-24R-SN

AXEV-18-7.625-54 AXEV-18-7.625-288

AXEV-18-7.625-11.574 AXEV-18-7.625-9.34 AXEV-18-7.625-83.188

DES-18-8-116 AXEV-VO-45-18-7.625-24 AXEV-VI-45-18-7.625-24 AXEV-VO-90-18-7.625-24 AXEV-H-90-18-7.625-24 AXEV-18-7.625-24.23

PART NUMBER

Plano de SuperiorBusTM

S u peri orB u s.mx | 6 0 4 . 5 7 2 . 4 4 1 9

3

36 [914]

DESIGNED AND MADE IN NORTH AMERICA.

38 [965] TO TOP OF TRENCH NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

FRONT SCALE 1/75

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

244 [6198] INSIDE TRENCH

18 11/16 [474] TO OUTSIDE FACE OF WALL 7 [178] WALL THICKNESS

178 [4521] TO TRENCH OPENING

24 [610]

504 [12802] TO OUTSIDE OF WALL

CABLE BUS LAYOUT

XXXX-01-00 DRAWN K.LYNES

PART NO. DESIGNED K.LYNES

CHECKED M.COX

SAMPLE TITLE

APPROVED M.COX

2 4

DATE

XXXX

W.O.

SHEET

Plano de SuperiorBusTM

PH 604-572-4419 FX 604-572-4416

NOTES VENTILATED COVERS SHOWN AS SOLID FOR CLARITY. DIMENSIONS REFER TO BUS CENTERLINE UNLESS NOTED OTHERWISE. FOR ALUMINUM CABLE BUS DIMENSIONS, SEE DRAWING: ALUMINUM SYSTEM CUTSHEET. FOR STAINLESS CABLE BUS DIMENSIONS, SEE DRAWING: STAINLESS SYSTEM CUTSHEET FOR SAMPLE ONLY, NOT FOR PRODUCTION

214 [5436] PROJECT

3.

2.

1.

140 [3556] TO FACE OF TRANSFORMER ENCLOSURE

28 [711] TO TRANSFORMER

108 [2743]

24 [610]

4

Integridad, Ingenio, Innovación

168 [4267]

DESIGNED AND MADE IN NORTH AMERICA.

360 [9144] TO OUTSIDE FACE OF WALL

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

TOP SCALE 1/75

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

PH 604-572-4419 FX 604-572-4416

36 [914]

120 [3048]

NOTES

56 1/16 [1425] TO ENCLOSURE FACE

CABLE BUS LAYOUT

XXXX-01-00 DRAWN K.LYNES

PART NO. DESIGNED K.LYNES

CHECKED M.COX

SAMPLE TITLE

APPROVED M.COX

3 4

DATE

XXXX

W.O.

SHEET

VENTILATED COVERS SHOWN AS SOLID FOR CLARITY. DIMENSIONS REFER TO BUS CENTERLINE UNLESS NOTED OTHERWISE. FOR ALUMINUM CABLE BUS DIMENSIONS, SEE DRAWING: ALUMINUM SYSTEM CUTSHEET. FOR STAINLESS CABLE BUS DIMENSIONS, SEE DRAWING: STAINLESS SYSTEM CUTSHEET FOR SAMPLE ONLY, NOT FOR PRODUCTION PROJECT

3.

2.

1.

36 [914]

Plano de SuperiorBusTM

S u peri orB u s.mx | 6 0 4 . 5 7 2 . 4 4 1 9

5

DESIGNED AND MADE IN NORTH AMERICA.

36 [914]

214 [5436] NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

SIDE SCALE 1/40

120 [3048]

2 [51] #12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

108 [2743]

28 [711] TO TRANSFORMER

CABLE BUS LAYOUT

XXXX-01-00 DRAWN K.LYNES

PART NO. DESIGNED K.LYNES

CHECKED M.COX

SAMPLE TITLE

APPROVED M.COX

4 4

DATE

XXXX

W.O.

SHEET

Plano de SuperiorBusTM

PH 604-572-4419 FX 604-572-4416

NOTES VENTILATED COVERS SHOWN AS SOLID FOR CLARITY. DIMENSIONS REFER TO BUS CENTERLINE UNLESS NOTED OTHERWISE. FOR ALUMINUM CABLE BUS DIMENSIONS, SEE DRAWING: ALUMINUM SYSTEM CUTSHEET. FOR STAINLESS CABLE BUS DIMENSIONS, SEE DRAWING: STAINLESS SYSTEM CUTSHEET FOR SAMPLE ONLY, NOT FOR PRODUCTION PROJECT

3.

2.

1.

6

Integridad, Ingenio, Innovación

FRONT VIEW SCALE 1/12

TOP VIEW SCALE 1/12

32 [813] W/O SIDE PANELS

32 1/4 [818] INCL. SIDE PANELS

38 [965]

DESIGNED AND MADE IN NORTH AMERICA.

4 1/4 [108]

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

SIDE VIEW SCALE 1/12

22 3/4 [578]

17 [432]

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

BOTTOM VIEW SCALE 1/15

PH 604-572-4419 FX 604-572-4416

NEOPRENE GASKET TO BE PROVIDED FOR CONNECTION TO TRANSFORMER

RAIN GUARD

NOTES

TRANSFORMER ENCLOSURE

XXXX-40-00 DRAWN K.LYNES

PART NO. DESIGNED K.LYNES

CHECKED

SAMPLE TITLE

APPROVED

1 1

DATE

XXXX

W.O.

SHEET

ENCLOSURE IS TYPE NEMA 3R MATERIAL: 316 STAINLESS STEEL GROUND LUG TO BE PROVIDED INSIDE ENCLOSURE FOR GROUNDING ENCLOSURE TO EQUIPMENT RECOMMENDED INSTALLATION METHOD: 3/8" STAINLESS BOLTS BOLTED COVER CONNECTION NOT SHOWN FOR SAMPLE ONLY, NOT FOR PRODUCTION PROJECT

4.

5.

6.

3.

1.

2.

FLANGES PRE-PUNCHED FOR BOLTED CONNECTION TO TRANSFORMER

REMOVABLE SIDE PANELS WITH NEOPRENE GASKETED CONNECTION BETWEEN PANEL AND BOX

Componentes y Accessorios

35 3/8 [899]

28 [711] TO BUS 

22 3/4 [578]

S u peri orB u s.mx | 6 0 4 . 5 7 2 . 4 4 1 9

7

30°

AXEV-H-30-18-7.625-24 SCALE 1/12

21 1/2 [546]

43 3/4 [1111]

R22 1/4 [565]

DESIGNED AND MADE IN NORTH AMERICA.

45°

R22 1/4 [565]

7 5/8 [194]

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

PH 604-572-4419 FX 604-572-4416

90°

43 3/4 [1111]

CHECKED

APPROVED

SEE VIEW LABELS FOR PART NUMBER PART NO.

DRAWN K.LYNES

STANDARD 24" RADIUS HORIZONTAL FITTINGS DESIGNED K.LYNES

STANDARD FITTINGS 18-7.625 SYSTEM TITLE

1 1

DATE

N/A

W.O.

SHEET

VENTILATED COVERS SHOWN AS SOLID FOR CLARITY. DIMENSIONS IN INCHES [mm]

NOTES

R22 1/4 [565]

PROJECT

1.

2.

AXEV-H-90-18-7.625-24 SCALE 1/12

Componentes y Accessorios

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

AXEV-H-45-18-7.625-24 SCALE 1/12

21 1/2 [546]

43 3/4 [1111]

21 1/2 [546] 7 5/8 [194]

7 5/8 [194]

Integridad, Ingenio, Innovación

30°

R22 3/8 [568]

AXEV-VI-30-18-7.625-24 SCALE 1/10

7 5/8 [194]

30 [762]

8 R22 3/8 [568]

21 1/2 [546]

90°

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

AXEV-VI-90-18-7.625-24 SCALE 1/10

DESIGNED AND MADE IN NORTH AMERICA.

7 5/8 [194]

21 1/2 [546]

R22 3/8 [568]

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

45°

7 5/8 [194]

PH 604-572-4419 FX 604-572-4416

NOTES

21 1/2 [546]

DRAWN K.LYNES

CHECKED

APPROVED

SEE VIEW LABELS FOR PART NUMBER PART NO. DESIGNED K.LYNES

STANDARD 24" RADIUS VERTICAL INSIDE FITTINGS TITLE

STANDARD FITTINGS 18-7.625 SYSTEM

1 1

DATE

N/A

W.O.

SHEET

VENTILATED COVERS SHOWN AS SOLID FOR CLARITY. DIMENSIONS IN INCHES [mm] PROJECT

1.

2.

AXEV-VI-45-18-7.625-24 8 7 625 24 SCALE 1/10

Componentes y Accessorios

30 [762]

30 [762]

S u peri orB u s.mx | 6 0 4 . 5 7 2 . 4 4 1 9

9

30°

31 5/8 [803]

R24 [610]

7 5/8 [194]

90°

AXEV-VO-30-18-7.625-24 SCALE 1/10

DESIGNED AND MADE IN NORTH AMERICA.

31 5/8 [803]

R24 [610]

21 1/2 [546]

45°

21 1/2 [546]

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

31 5/8 [803]

R24 [610]

7 5/8 [194]

PH 604-572-4419 FX 604-572-4416

NOTES

21 1/2 [546]

DRAWN K.LYNES

CHECKED

APPROVED

SEE VIEW LABELS FOR PART NUMBER PART NO. DESIGNED K.LYNES

STANDARD 24" RADIUS VERTICAL OUTSIDE FITTINGS TITLE

STANDARD FITTINGS 18-7.625 SYSTEM

1 1

DATE

N/A

W.O.

SHEET

VENTILATED COVERS SHOWN AS SOLID FOR CLARITY. DIMENSIONS IN INCHES [mm] PROJECT

1.

2.

AXEV-VO-45-18-7.625-24 SCALE 1/10

Componentes y Accessorios

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

AXEV-VO-90-18-7.625-24 SCALE 1/10

7 5/8 [194]

10

Integridad, Ingenio, Innovación

30°

CBSS6-HO-30D-18-8-24R SCALE 1/12

21 1/2 [547]

8 [203]

 R33 [838]

10 3/4 [273]

8 [203]

21 1/2 [547]

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

CBSS6-HO-45D-18-8-24R SCALE 1/12

DESIGNED AND MADE IN NORTH AMERICA.

45°

 R33 [838]

10 3/4 [273]

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

PH 604-572-4419 FX 604-572-4416

90°

CHECKED

APPROVED

SEE VIEW LABELS FOR PART NUMBER PART NO.

DRAWN K.LYNES

SS HORIZONTAL FITTING DESIGNED T.NGUYEN

STANDARD FITTINGS 18-8 STAINLESS SYSTEM TITLE

ALL METALLIC PARTS ARE 316 STAINLESS STEEL ALL DIMENSIONS IN INCHES [mm]

8 [203] PROJECT

1.

2.

NOTES

 R33 [838]

10 3/4 [273]

CBSS6-HO-90D-18-8-24R CBSS6 HO 90D 18 8 24R SCALE 1/12

Componentes y Accessorios

1 1

DATE

N/A

W.O.

SHEET

21 1/2 [547]

S u peri orB u s.mx | 6 0 4 . 5 7 2 . 4 4 1 9

11

60°

90°

DESIGNED AND MADE IN NORTH AMERICA.

 R28 [711]

 R28 [711]

CBSS6-VO-60D-18-8-24R SCALE 1/10

4 [102]

CBSS6-VO-90D-18-8-24R SCALE 1/10

21 1/2 [546]

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

PH 604-572-4419 FX 604-572-4416

NOTES

CHECKED

APPROVED

SEE VIEW LABELS FOR PART NUMBER PART NO.

DRAWN K.LYNES

SS VERTICAL OUTSIDE FITTING DESIGNED S. JUNG

STANDARD FITTINGS 18-8 STAINLESS SYSTEM TITLE

ALL METALLIC PARTS ARE 316 STAINLESS STEEL ALL DIMENSIONS IN INCHES [mm] PROJECT

1.

2.

Componentes y Accessorios

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

4 [102]

8 [203]

8 [203]

1 1

DATE

N/A

W.O.

SHEET

8 [203] 8 [203]

12

Integridad, Ingenio, Innovación  R26 [660]

 R26 [660]

90°

4 [102]

DESIGNED AND MADE IN NORTH AMERICA.

60°

4 [102]

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

CBSS6-VI-90D-18-8-24R SCALE 1/10

CBSS6-VI-60D-18-8-24R SCALE 1/10

21 1/2 [546]

21 1/2 [546]

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

PH 604-572-4419 FX 604-572-4416

NOTES

CHECKED

APPROVED

SEE VIEW LABELS FOR PART NUMBER PART NO.

DRAWN K.LYNES

SS VERTICAL INSIDE FITTING DESIGNED T.NGUYEN

STANDARD FITTINGS 18-8 STAINLESS SYSTEM TITLE

ALL METALLIC PARTS ARE 316 STAINLESS STEEL ALL DIMENSIONS IN INCHES [mm] PROJECT

1.

2.

Componentes y Accessorios

1 1

DATE

N/A

W.O.

SHEET

S u peri orB u s.mx | 6 0 4 . 5 7 2 . 4 4 1 9

13

36°

90°

 R26 [660]

DESIGNED AND MADE IN NORTH AMERICA.

8 [204]

4 [102]

 R28 [711]

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

PH 604-572-4419 FX 604-572-4416

NOTES

CHECKED

APPROVED

CBSS6-VO-90D-18-8-24R-SN PART NO.

DRAWN K.LYNES

SS VERTICAL SWAN NECK FITTING DESIGNED K.LYNES

SAMPLE TITLE

ALL METALLIC PARTS ARE 316 STAINLESS STEEL ALL DIMENSIONS IN INCHES [mm]

21 1/2 [546]

PROJECT

1.

2.

Componentes y Accessorios

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

126°

4 [102]

1 1

DATE

XXXX

W.O.

SHEET

Integridad, Ingenio, Innovación

3.

1.

2.

9 13/16 [250]

4 3/16 [107]

14 [356]

NOTES

FRONT SCALE 1 / 7

ALL FABRICATED METALLIC PARTS ARE ALUMINUM DIMENSIONS ARE IN INCHES [mm] RECOMMENDED INSTALL METHOD: 3/8" STAINLESS BOLTS WITH BUTYL SEALANT OR RUBBER GASKET INTERFACE BETWEEN EQUIPMENT AND PLATE

3 1/2 [88]

24 [610]

20 9/16 [521]

DESIGNED AND MADE IN NORTH AMERICA.

GUIDE TYPE MAY CHANGE DEPENDING ON ACTUAL CABLE DIAMETER

4 1/4 [108]

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

SIDE SCALE 1 / 7

ISOMETRIC SCALE 1 / 7

3

1

2

17 7/8 [455]

CHECKED

1 1

DATE

N/A

W.O.

SHEET

3 1/16 [77] BLOCK EDGE

APPROVED

DES-18-8-116 PART NO.

DRAWN K. MELNIKOV

DRY EQUIPMENT SEAL 18 X 8 SYSTEM TITLE

DESIGNED M.COX

STANDARD DRY EQUIPMENT SEAL PROJECT

3 13/16 [97] BLOCK BOTTOM

SEAL STUB DRY SEAL BLOCK 2X2

DESCRIPTION DRY EQUIPMENT SEAL PLATE FOR 18X8 BUS

BACK SCALE 1 / 7

WS-STUB-BEND DSB-ASM-2-116

PART NUMBER DES-PLT-18-8

PH 604-572-4419 FX 604-572-4416

2 3

2 3

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

QTY 1

ITEM 1

Componentes y Accessorios

6 3/8 [163]

14

S u peri orB u s.mx | 6 0 4 . 5 7 2 . 4 4 1 9

15

6.

5.

4.

2.

3.

1.

20 [508]

NOTES

FRONT SCALE 1 / 8

23 9/16 [598]

30 [762]

RECOMMENDED WALL CUTOUT SCALE 1/15

10 [254]

23 1/2 [597]

WALL PLATE AND STUBS ARE 316 STAINLESS STEEL, WALL CHANNELS ARE ALUMINUM ALL HARDWARE IS 316 STAINLESS STEEL DIMENSIONS ARE IN INCHES [mm] FOR FIRESTOP WALL/FLOOR SEAL INSTALLATION SEE DRAWINGS: DRY WALL/FLOOR SEAL FIRESTOP 18 X 8 SYSTEM AND FIRESTOP PILLOW INSTALLATION RECOMMENDED INSTALL METHOD: 3/8" CONCRETE ANCHORS WITH BUTYL SEALANT OR RUBBER GASKET INTERFACE BETWEEN WALL AND PLATE DRY SEAL DOES NOT REQUIRE SILICONE OR BUTYL SEALANT ON SEAL BLOCKS OR AROUND CABLES DURING INSTALLATION

7 3/16 [182]

6 1/2 [164]

12 13/16 [326]

DESIGNED AND MADE IN NORTH AMERICA.

GUIDE MAY CHANGE DEPENDING ON ACTUAL CABLE DIAMETER

WALL PLATE IS 316 STAINLESS STEEL

3

ISOMETRIC SCALE 1/10

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

STUBS ARE TRIMMED TO ALLOW ATTACHMENT TO VERTICAL FITTING

4 1/4 [108]

PART NUMBER WS-CNL-2-BEND-14 DWS-PLT-18-8-SS WS-STUB-2-BEND-SS DSB-ASM-2-116

PH 604-572-4419 FX 604-572-4416

DRAWN K.LYNES

CHECKED

DWS-18-8-116-SS PART NO. DESIGNED K.LYNES

DRY WALL SEAL - STAINLESS TITLE

SAMPLE

BACK SCALE 1 / 8

PROJECT

DESCRIPTION

6 1/16 [154] BLOCK EDGE

WALL SEAL CHANNEL STAINLESS DRY WALL SEAL PLATE FOR 18X8 BUS STAINLESS SEAL STUB DRY SEAL BLOCK 2X2

17 7/8 [455]

WALL SEAL CHANNELS ARE ALUMINUM

STUBS ARE 316 STAINLESS STEEL

1

2 1 2 3

Componentes y Accessorios

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

SIDE SCALE 1 / 8

LENGTH DEPENDENT ON WALL THICKNESS

4

2

QTY

1 2 3 4

APPROVED

1 1

DATE

N/A

W.O.

SHEET

13 3/16 [335]

ITEM

6 13/16 [173] BLOCK BOTTOM

Integridad, Ingenio, Innovación

2.

3.

1.

BLUE

136

23 1/2 [597]

DRY WALL/FLOOR SEAL FIRESTOP PART NUNBER WILL HAVE A 3 DIGIT NUMBER IN PLACE OF STS. THIS NUMBER REPRESENTS THE COLOR CODED GUIDES BASED ON CABLE DIAMETER. COLORS LISTED IN GUIDE COLOR CODE TABLE FIRESTOP RATING: 2 HOURS DIMENSIONS IN INCHES [mm]

NOTES

ORANGE

126

RECOMMENDED WALL/FLOOR CUTOUT SCALE 1/15

BLACK

YELLOW

116

GREEN

096

106

COLOR

GUIDE COLOR CODE

CODE

10 [254]

16 1

DESIGNED AND MADE IN NORTH AMERICA.

FRONT VIEW SCALE 1/15

QTY 1 A/R 2

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

DESCRIPTION DRY WALL/FLOOR SEAL FOR 18 X 8 BUS FIRESTOP PILLOW BACKING PLATE

PH 604-572-4419 FX 604-572-4416

CHECKED

APPROVED

DWSF-18-8-STS PART NO.

DRAWN K.LYNES

DRY WALL/FLOOR SEAL FIRESTOP 18 X 8 SYSTEM TITLE

DESIGNED M.COX

DRY WALL/FLOOR SEAL PROJECT

SIDE VIEW SCALE 1/15

NOTE: ITEM 2 PART NUMBER XX WILL CHANGE ACCORDING TO SIZE OF FIRESTOP PILLOW SUPPLIED

PART NUMBER DWS-18-8-STS SSBXX WS-BP-18-8

SUPPLIED FIRESTOP PILLOW SIZES AND QUANTITIES ARE BASED ON RECOMMENDED WALL CUTOUT SIZE

ITEM 1 2 3

NOTE: CABLE BUS REMOVED FOR CLARITY

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

EXPLODED VIEW SCALE 1/15

2

3

Componentes y Accessorios

1 2

DATE

N/A

W.O.

SHEET

S u peri orB u s.mx | 6 0 4 . 5 7 2 . 4 4 1 9

17

WALL THICKNESS 9 [229] AND LARGER

8 [203]

FLAT WALL PLATE

1 [25]

OFFSET WALL PLATES

DESIGNED AND MADE IN NORTH AMERICA.

3 [76]

6 [152]

OFFSET WALL PLATE MUST BE USED FOR WALL/FLOOR THICKNESS LESS THAN 9" [229]

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

PH 604-572-4419 FX 604-572-4416

CHECKED

APPROVED

DWSF-18-8-STS PART NO.

DRAWN K.LYNES

DRY WALL/FLOOR SEAL FIRESTOP 18 X 8 SYSTEM TITLE

DESIGNED M.COX

DRY WALL/FLOOR SEAL PROJECT

BACKING PLATE OFFSET WALL/FLOOR THICKNESS PLATE OFFSET ≥9" [229] 0" [0] 8" [203] 1" [25] 7" [178] 2" [51] 6" [152] 3" [76] 5" [127] 4" [102]

NOTE: CABLE BUS REMOVED FOR CLARITY

Componentes y Accessorios

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

LENGTH OF OFFSET DEPENDS ON WALL/FLOOR THICKNESS

PACK FIRESTOP PILLOWS INTO CAVITY AS PER MANUFACTURER DATASHEET

2 2

DATE

N/A

W.O.

SHEET

Integridad, Ingenio, Innovación

6 [152]

8 [203]

5 [127]

18

5 [127]

20 [508]

7 1/2 [191]

FRONT SCALE 1 / 4

15 [381]

DESIGNED AND MADE IN NORTH AMERICA.

4X 5/16 [8] THRU

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

SIDE SCALE 1 / 4

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

LENGTH OF OFFSET DETERMINED

BY WALL THICKNESS

PH 604-572-4419 FX 604-572-4416

NOTES

ISOMETRIC SCALE 1 / 4

DRAWN K.LYNES

WS-BPL-18-8-X PART NO. DESIGNED T.NGUYEN

BACKING PLATE TITLE

CHECKED

APPROVED

N/A DATE

W.O.

MATERIAL: ALUMINUM RECOMMENDED INSTALL METHOD: 1/4" CONCRETE ANCHORS OFFSET BACKING PLATES ARE SIDE SPECIFIC, RIGHT SIDE 3. BACKING PLATE IS A MIRROR IMAGE OF THE LEFT SIDE BACKING PLATE SHOWN ABOVE 'X' IN PART NUMBER REFERS TO THE BACKING PLATE OFFSET IN 4.

INCHES 5. 'L' IN PART NUMBER REFERS TO LEFT SIDE BACKING PLATE SHEET 1 1 PROJECT OFFSET FIRESTOP BACKING PLATE

1.

2.

Componentes y Accessorios

1 5/8 [41]

6 [152]

S u peri orB u s.mx | 6 0 4 . 5 7 2 . 4 4 1 9

19

3 [76]

C

A

A

B

18 [457]

PHASE ARRANGEMENT SCALE 1 /4

21 1/2 [546]

C

A A

B B

C

DESIGNED AND MADE IN NORTH AMERICA.

A

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

MFIGB-25 GROUND CLAMP # 4/0 CU GROUND/BOND CABLE

BOTTOM SUPPORT BLOCK PRE-INSTALLED

MIDDLE SUPPORT BLOCK

TOP SUPPORT BLOCK

CABLE GUIDES PRE-INSTALLED

3

Especificaciones del Sistema

3 [76]

B

C

SIDE SCALE 1/15

18 [457] MAX RUNG  SPACING

TOP SCALE 1/15

LENGTH

SPLICE PLATE OUTSIDE ENCLOSURE (2) PER CONNECTION

2

SS-B100 BOLT INSIDE ENCLOSURE (12) PER CONNECTION

1

4

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

PH 604-572-4419 FX 604-572-4416

SS-N100 NUT OUTSIDE ENCLOSURE (12) PER CONNECTION

DETAIL A SCALE 1 / 8

SIDE RAIL RUNG BOTTOM COVER TOP COVER

NOTES

DESCRIPTION

DRAWN T. NGUYEN

CHECKED M.COX

5kV-3WIRE-2600A PART NO. DESIGNED T.NGUYEN

ALUMINUM SYSTEM CUT SHEET TITLE

APPROVED M.COX

XXXX DATE

W.O.

SUPPORT BLOCK SPACING: MAX 36 [914] HORIZONTAL SECTIONS MAX 18 [457] VERTICAL SECTIONS 2. CABLE: 500 MCM MV-105 COPPER EPR/PVC OKOGUARD-OKOSEAL OKONITE 114-23-3846 4 CONDUCTORS/PHASE, 0 CONDUCTORS/NEUTRAL 3. TERMINATION: 3M 7624-T-110 INDOOR 4. LUG: ILSCO PN CLND-500-12-134 5. SYSTEM WEIGHT (HORIZONTAL) : 34.2 LB./FT. [51.0 KG/M] SYSTEM WEIGHT (VERTICAL) : 35.1 LB./FT [52.3 KG/M] 6. SHORT CIRCUIT: 65 kA / 60 CYCLES 7. GROUND CABLE: #4/0 COPPER 8. MATERIAL: ALL METALLIC PARTS ARE ALUMINUM CABLE SUPPORT MATERIALS: 30% GLASS FIBER REINFORCED PBT 9.

BLOCKS WITH HDPE CABLE GUIDES 10. FOR SAMPLE ONLY, NOT FOR PRODUCTION SHEET 1 1 PROJECT SAMPLE SYSTEM CUT SHEET

1.

1 2 3 4

ITEM

Integridad, Ingenio, Innovación

2 [51]

6 [152]

20

3 [76]

C

A

3 [76]

A

B

18 [457]

A C

PHASE ARRANGEMENT SCALE 1 /4

21 1/2 [546]

B

C

SIDE SCALE 1/25

TOP SCALE 1/25

LENGTH 118 [2997] MAX

A

B B

C

DESIGNED AND MADE IN NORTH AMERICA.

A

NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.

CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN

MFIGB-25 GROUND CLAMP # 4/0 CU GROUND/BOND CABLE

BOTTOM SUPPORT BLOCK PRE-INSTALLED

MIDDLE SUPPORT BLOCK

TOP SUPPORT BLOCK

CABLE GUIDES PRE-INSTALLED

3

2

1

Especificaciones del Sistema

4

#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA

PH 604-572-4419 FX 604-572-4416

DETAIL A SCALE 1 / 8

SIDE RAIL RUNG BOTTOM COVER TOP COVER

NOTES

DESCRIPTION

DRAWN T. NGUYEN

CHECKED M.COX

5KV-3WIRE-2600A PART NO. DESIGNED K.LYNES

STAINLESS SYSTEM CUT SHEET TITLE

APPROVED M.COX

XXXX DATE

W.O.

SUPPORT BLOCK SPACING: MAX 36 [914] HORIZONTAL SECTIONS MAX 18 [457] VERTICAL SECTIONS 2. CABLE: 500 MCM MV-105 COPPER EPR/PVC OKOGUARD-OKOSEAL OKONITE 114-23-3846 4 CONDUCTORS/PHASE, 0 CONDUCTORS/NEUTRAL 3. TERMINATION: 3M 7624-T-110 INDOOR 4. LUG: ILSCO PN CLND-500-12-134 5. SYSTEM WEIGHT (HORIZONTAL) : 41.1 LB./FT. [61.2 KG/M] SYSTEM WEIGHT (VERTICAL) : 42.0 LB./FT [62.5 KG/M] 6. SHORT CIRCUIT: 65 kA / 60 CYCLES 7. GROUND CABLE: #4/0 COPPER 8. MATERIAL: ALL METALLIC PARTS ARE 316 STAINLESS STEEL CABLE SUPPORT MATERIALS: 30% GLASS FIBER REINFORCED PBT 9.

BLOCKS WITH HDPE CABLE GUIDES 10. FOR SAMPLE ONLY, NOT FOR PRODUCTION SHEET 1 1 PROJECT SAMPLE SYSTEM CUT SHEET

1.

1 2 3 4

ITEM

General Cada sistema SuperiorBus TM ha sido diseñado con la máxima eficiencia como prioridad y analizado a través de un Análisis de Elementos Finitos (FEA). Producimos sistemas de cablebús que cumplen con todos los requisitos establecidos por CSA y UL. Este reporte muestra los resultados obtenidos a través del FEA, con una cobertura de análisis eléctrico, térmico y electromagnético.

General Certificaciones  Certificación CSA como sistema cablebús Each Superior Bus system has been designed with efficiency as a top priority and analyzed with  Certificación CSA como sistema completamente ventilado FEA. We produce Cable bus systems that meet all requirements set by the CSA and UL. This report  La caja de cablebús cuenta con certificación UL como conductor de tierra goes over the results obtained through FEA covering electrical, thermal and electromagnetic analysis.  Conductores aislados de clasificación FT4 con certificación CSA y UL Certifications Especificaciones del Sistema

� CSA cer��ed Cable Bus system � CSA cer��ed fully ven�lated system Voltaje del Amperaje del Cable MCM Ambiente � Cable bus enclosure is UL cer�fed as grounding conductor Sistema Sistema � FT4 rated insulated conductors with both CSA and UL cer��ca�on

System Voltage

3

500

System Ampacity

WIRE

Calificación continua 2600A 5000V 2600A 3 Corriente de cable permitida 695A (según temperatura ambiente Continuous rating 2600A y máxima) Allowable cable ampacity 695A (as per ambient max temp.)

Conductores por&fase 4 4 Conductors per phase Frecuencia 60Hz Frequency

40 MCM 500

90 AMBIENT 40

MAX TEMP. 90

Análisis

5000V 2600A System Specifications

Temp.

Max.

60 Hz

S u peri orB u s.mx | 6 0 4 . 5 7 2 . 4 4 1 9

21

Análisis Térmico La temperatura de cada conductor en nuestro sistema SuperiorBusTM no excederá el máximo nominal de temperatura bajo condiciones especificadas. Al mantener un sistemaThermal por debajo de dicha temperatura, la vida operativa del sistema SuperiorBusTM se Analysis puede maximizar sin temor a fallas de aislamiento o pérdida de integridad .

The temperature of each conductor in our Superior Bus system will not exceed the rated maximum temperature under specified conditions. By maintaining a system under that temperature, the operating Conductor Carcasa Airefailure saliendo la life of the SuperiorAislante Bus system can be maximized without fear of insulation or loss de of integrity. carcasa Kelvins Grados °C Kelvins Grados °C Kelvins Grados °C Kelvins Grados °C 361.74 89 357.77 85 323.33 50 324.24 51 CONDUCTOR INSULATOR ENCLOSURE AIR LEAVING ENCLOSURE Kelvins Degrees °C Kelvins Degrees °C Kelvins Degrees °C Kelvins Degrees °C 361.74 89 357.77 85 323.33 50 324.27 51 Temperature T (K) 362.0

357.1

352.2

347.3

342.4

Análisis

337.5

332.6

327.7

322.8

317.9

313.0

22

Integridad, Ingenio, Innovación

Análisis Eléctrico Para una alta eficiencia y equilibrio del sistema, se realiza un profundo análisis eléctrico del sistema SuperiorBusTM. Como con todos los conductores que llevan CA, la proximidad y el efecto skin afectan en gran medida la disposición de las fases.

Cada sistema SuperiorBusTM cuenta con arreglo de fases ideal para proporcionar mínima impedancia y caída de voltaje para cada carga.

Corriente A funcionando a 2600A continuos A1 638.48 C3 653.13

B1 650.70 A3 669.15

C1 637.66 B3 676.91

A2 641.95 C4 664.22

B2 643.03 A4 654.72

C2 658.97 B4 633.39

Caída de voltaje por cada 100 pies (V) Caída de Voltaje A 3.69

Caída de Voltaje B 3.81

Caída de Voltaje C 3.55

A1 5.79 C3 5.43 Fase A 1.42

B1 5.85 A3 5.52

C1 5.57 B3 5.63 Fase B 1.46

A2 5.76 C4 5.34

B2 5.92 A4 5.64

Análisis

Impedancia por cada 100 pies (mΩ) C2 5.39 B4 6.02

Fase C 1.36

Calor Joule por cada 100 pies (W) Conductores 13788.13

Carcasa 737.13

Shielding 1367.03

S u peri orB u s.mx | 6 0 4 . 5 7 2 . 4 4 1 9

23

Análisis EMF/EMI Los sistemas de distribución de energía eléctrica generan interferencia electromagnética (EMI) la cual es altamente indeseable en centros de datos y alrededor de equipos con sensibilidad a este tipo de interferencia. Cada sistema SuperiorBusTM está diseñado para EMF/EMI Analysis minimizar la generación de EMI debido a cancelaciones de campo internas.

Power distribution systems will generate electromagnetic interference (EMI) which is highly undesirable in data centers and around EMI sensitive equipment. Each Superior Bus system is designed to minimize EMI generation due to internal field cancellations.

Distancia Densidad de Flujo 12° 267.67 (mG) 24° Distance Flux92.06 Density(mG) 36° 39.26 12" 267.67 [mG](mG) 48° 18.57 24" 92.06 [mG](mG) 36" 48"

39.26 [mG] 18.57 [mG]

DISTANCE VS FLUX DENSITY (2600 A)

Análisis

FLUX DENSITY [MILLIGAUSS]

100000 10000 1000 100 10 1 0

10

20

30 DISTANCE [ INCHES ]

24

Integridad, Ingenio, Innovación

40

50

60

S u peri orB u s.mx | 6 0 4 . 5 7 2 . 4 4 1 9

25

HOJA TÉCNICA DEL CABLE HOJA TÉCNICA DEL CONECTADOR DE COMPRESIÓN HOJA TÉCNICA DE LAS TERMINACIONES RETRÁCTILES EN FRÍO (SI ES APLICABLE) HOJA TÉCNICA DE LA ALMOHADILLA CORTAFUEGO (SI ES APLICABLE) HOJA TÉCNICA DE OTRO PRODUCTO RELEVANTE

Información Adicional

    

TODAS LAS MUESTRAS DE PAQUETES DE DIBUJOS INCLUYEN:

Superior Tray Systems Inc. 7331 Vantage Way Delta, BC, V4G 1C9 Canada Tel: +1-604-572-4419 Email: info@superiortray.com Web: www.superiorbus.mx

26

superiorbus.mx Integridad, Ingenio, Innovaciรณn Integrity, Ingenuity, Innovation