CABLE BUS SAMPLE DRAWING PACKAGE. â„¢
i
superiortray.com Integrity, Ingenuity, Innovation Integrity, Ingenuity, Innovation
9001:201 5 ISO
C
ER
T I F I C AT I O
N
TM
Introduction I. II.
™
Layout Components & Accesories Transformer Enclosure Standard 24” Radius Horizontal Fittings Standard 24” Radius Vertical Inside Fittings Standard 24” Radius Vertical Outside Fittings SS Horizontal Fitting SS Vertical Outside Fitting SS Vertical Inside Fitting ™
SS Vertical Swan Neck Fitting Dry Equipment Seal 18x8 System Dry Wall Seal Stainless Dry Wall/Floor Seal Firestop 18x8 System Backing Plate ™
III.
System Cut Sheets Aluminum System Cut Sheet Stainless Steel System Cut Sheet
IV.
™
Analysis
System Specifications Thermal Analysis Electrical Analysis EMF/EMI Analysis IV. Additional Information
ii
Integrity, Ingenuity, Innovation
1 2-5 5-18 6 7 8 9 10 11 12 13 14 15 16 18 19-20 19 20 21-24 21 22 23 24 25
™
Sample Drawing Package SuperiorBus™ is more than a highly efficient power distribution system. Our CSA and UL certified SuperiorBus™ is easy to install.
Here at Superior Tray, our main goal is our customers’ satisfaction. We listen to your requirements, help you design your system layout and provide a custom-engineered solution that makes the installation process easy and cost-effective. A customized drawing package is sent with each SuperiorBusTM system. Each package will include engineering and layout drawings of the cable bus, cut sheets detailing the specifications and dimensions used in the system, along with the results of the FEA analysis of the particular system. In this sample drawing package, you will find an example of a SuperiorBusTM system.
FOR MORE INFORMATION, CONTACT US AT: Tel: 604.572.4419 Email: info@superiortray.com
™
S uperi orTra y.com | 6 0 4 . 5 7 2 . 4 4 1 9
1
SuperiorBusTM Layout 2 18 22 21 15
4
8
23
7 19
2 9
20
6 5 1
24
19
QTY
1 2 3 4 5 6
1 1 1
CABLE BUS IS ALUMINUM INSIDE BUILDING
25
Integrity, Ingenuity, Innovation
25
ITEMS 45 AND 46 LOCATED ON BACK SIDE OF WALL 26
11
14
13
12
39
31 CABLE BUS IS STAINLESS STEEL AFTER WALL
38
30
28 42
34
29 35
33
CABLE BUS ENTERS TRENCH AT THIS POINT
29
43 44
37
27 30
30
38
36
38
PART NUMBER
DESCRIPTION
1 2 1
DES-18-8-116 AXEV-VO-45-18-7.625-24 AXEV-VI-45-18-7.625-24 AXEV-VO-90-18-7.625-24 AXEV-H-90-18-7.625-24 AXEV-18-7.625-24.23
DRY EQUIPMENT SEAL VERTICAL OUTSIDE CABLE BUS FITTING VERTICAL INSIDE CABLE BUS FITTING VERTICAL OUTSIDE CABLE BUS FITTING HORIZONTAL FITTING CABLE BUS SECTION 24.23"
7 8 9
1 1 1
AXEV-18-7.625-11.574 AXEV-18-7.625-9.34 AXEV-18-7.625-83.188
CABLE BUS SECTION 11.574" CABLE BUS SECTION 9.34" CABLE BUS SECTION 83.188"
10 11
1 1 1
AXEV-18-7.625-54 AXEV-18-7.625-288
CABLE BUS SECTION 54" CABLE BUS SECTION 288"
2
AXEV-18-7.625-38.75 CBSS6-VO-90D-18-8-24R-SN
CABLE BUS SECTION 38.75" SS VERTICAL SWAN NECK FITTING
12 13
10
5
ITEM
14
1
DWSF-18-8-116-SS
DRY WALL SEAL WITH FIRESTOP - STAINLESS
15 17
1 1
18 19 20 21 22 23 24 25 26 27 28 29 30
1 2 1 1 1 1 1 2 1 2 1 2 3
AXEV-VO-45-18-7.625-24-C AXEV-VI-45-18-7.625-24-C AXEV-VO-90-18-7.625-24-C AXEV-H-90-18-7.625-C AXEV-18-7.625-24.23-C AXEV-18-7.625-11.574-C AXEV-18-7.625-9.34-C AXEV-18-7.625-83.187-C AXEV-18-7.625-54-C AXEV-18-7.625-144-C AXEV-18-7.625-38.75-C CBSS6-VI-90D-18-8-24R CBSS6-VO-90D-18-8-24R CBSS6-HO-45D-18-8-24R CBSS6-18-8-118
ASSEMBLED VERTICAL OUTSIDE FITTING COVER VERTICAL INSIDE FITTING COVER ASSEMBLED VERTICAL OUTSIDE FITTING COVER HORIZONTAL FITTING COVER STRAIGHT SECTION COVER STRAIGHT SECTION COVER STRAIGHT SECTION COVER STRAIGHT SECTION COVER STRAIGHT SECTION COVER STRAIGHT SECTION COVER STRAIGHT SECTION COVER SS VERTICAL INSIDE FITTING SS VERTICAL OUTSIDE FITTING SS HORIZONTAL FITTING
31 32 33 34
1 1 1 1
CBSS6-18-8-12.296 CBSS6-18-8-74 CBSS6-18-8-41.948 CBSS6-18-8-6.405
35
1
CBSS6-18-8-23.405
SS CABLE BUS SECTION 118" [2997] SS CABLE BUS SECTION 12.296" [312] SS CABLE BUS SECTION 74" [1880] SS CABLE BUS SECTION 41.948" [1065] SS CABLE BUS SECTION 6.405" [163] SS CABLE BUS SECTION 23.405" [594]
36
1 1
XXXX-40-00
SS TRANSFORMER ENCLOSURE
CBSS6-18-8-42.391 CBSS6-18-8-118-C CBSS6-18-8-12.296-C CBSS6-18-8-74-C CBSS6-18-8-41.948-C CBSS6-18-8-6.405-C CBSS6-18-8-23.405-C CBSS6-18-8-42.391-C WS-BPR-18-8-1 WS-BPL-18-8-1
SS CABLE BUS SECTION 42.391" [1077] SS STRAIGHT SECTION COVER SS STRAIGHT SECTION COVER SS STRAIGHT SECTION COVER SS STRAIGHT SECTION COVER SS STRAIGHT SECTION COVER SS STRAIGHT SECTION COVER SS STRAIGHT SECTION COVER BACKING PLATE BACKING PLATE
37 38 39 40 41 42 43 44 45 46
3 1 1 1 1 1 1 1 1
40 32 ISOMETRIC SCALE 1/75
CABLE BUS EXITS TRENCH AT THIS POINT
NOTES
27 1. 2. 3. CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
VENTILATED COVERS SHOWN AS SOLID FOR CLARITY. CABLE BUS COMPONENTS NOT LABELED AS STAINLESS ARE ALUMINUM FOR SAMPLE ONLY, NOT FOR PRODUCTION
PROJECT
SAMPLE
SHEET
TITLE
CABLE BUS LAYOUT
W.O.
PART NO.
XXXX-01-00
DESIGNED K.LYNES
DRAWN K.LYNES
CHECKED M.COX
1 4
XXXX APPROVED M.COX
DATE
214 [5436]
178 [4521] TO TRENCH OPENING
38 [965] TO TOP OF TRENCH
108 [2743]
24 [610]
S uperi orTra y.com | 6 0 4 . 5 7 2 . 4 4 1 9
36 [914]
140 [3556] TO FACE OF TRANSFORMER ENCLOSURE
18 11/16 [474] TO OUTSIDE FACE OF WALL 7 [178] WALL THICKNESS
24 [610]
28 [711] TO TRANSFORMER
504 [12802] TO OUTSIDE OF WALL
244 [6198] INSIDE TRENCH FRONT SCALE 1/75
NOTES 1.
2.
3. CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
VENTILATED COVERS SHOWN AS SOLID FOR CLARITY. DIMENSIONS REFER TO BUS CENTERLINE UNLESS NOTED OTHERWISE. FOR ALUMINUM CABLE BUS DIMENSIONS, SEE DRAWING: ALUMINUM SYSTEM CUTSHEET. FOR STAINLESS CABLE BUS DIMENSIONS, SEE DRAWING: STAINLESS SYSTEM CUTSHEET FOR SAMPLE ONLY, NOT FOR PRODUCTION
PROJECT
SAMPLE
SHEET
TITLE
CABLE BUS LAYOUT
W.O.
PART NO.
XXXX-01-00
DESIGNED K.LYNES
DRAWN K.LYNES
CHECKED M.COX
2 4
XXXX APPROVED M.COX
DATE
3
SuperiorBusTM Layout
SuperiorBusTM Layout 4 360 [9144] TO OUTSIDE FACE OF WALL
36 [914] 56 1/16 [1425] TO ENCLOSURE FACE
36 [914]
Integrity, Ingenuity, Innovation
120 [3048]
168 [4267]
TOP SCALE 1/75
NOTES 1.
2.
3. CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
VENTILATED COVERS SHOWN AS SOLID FOR CLARITY. DIMENSIONS REFER TO BUS CENTERLINE UNLESS NOTED OTHERWISE. FOR ALUMINUM CABLE BUS DIMENSIONS, SEE DRAWING: ALUMINUM SYSTEM CUTSHEET. FOR STAINLESS CABLE BUS DIMENSIONS, SEE DRAWING: STAINLESS SYSTEM CUTSHEET FOR SAMPLE ONLY, NOT FOR PRODUCTION
PROJECT
SAMPLE
SHEET
TITLE
CABLE BUS LAYOUT
W.O.
PART NO.
XXXX-01-00
DESIGNED K.LYNES
DRAWN K.LYNES
CHECKED M.COX
3 4
XXXX APPROVED M.COX
DATE
120 [3048]
214 [5436]
S uperi orTra y.com | 6 0 4 . 5 7 2 . 4 4 1 9
108 [2743]
2 [51]
28 [711] TO TRANSFORMER
36 [914]
SIDE SCALE 1/40
NOTES 1.
2.
3. CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
VENTILATED COVERS SHOWN AS SOLID FOR CLARITY. DIMENSIONS REFER TO BUS CENTERLINE UNLESS NOTED OTHERWISE. FOR ALUMINUM CABLE BUS DIMENSIONS, SEE DRAWING: ALUMINUM SYSTEM CUTSHEET. FOR STAINLESS CABLE BUS DIMENSIONS, SEE DRAWING: STAINLESS SYSTEM CUTSHEET FOR SAMPLE ONLY, NOT FOR PRODUCTION
PROJECT
SAMPLE
SHEET
TITLE
CABLE BUS LAYOUT
W.O.
PART NO.
XXXX-01-00
DESIGNED K.LYNES
DRAWN K.LYNES
CHECKED M.COX
4 4
XXXX APPROVED M.COX
DATE
5
SuperiorBusTM Layout
Components & Accesories 6 RAIN GUARD 38 [965] 32 1/4 [818] INCL. SIDE PANELS
22 3/4 [578]
32 [813] W/O SIDE PANELS
Integrity, Ingenuity, Innovation
TOP VIEW SCALE 1/12
NEOPRENE GASKET TO BE PROVIDED FOR CONNECTION TO TRANSFORMER
REMOVABLE SIDE PANELS WITH NEOPRENE GASKETED CONNECTION BETWEEN PANEL AND BOX
17 [432]
FLANGES PRE-PUNCHED FOR BOLTED CONNECTION TO TRANSFORMER
28 [711] TO BUS
35 3/8 [899]
4 1/4 [108]
BOTTOM VIEW SCALE 1/15
NOTES 1. 2.
22 3/4 [578] FRONT VIEW SCALE 1/12
3.
SIDE VIEW SCALE 1/12
4. 5. 6.
CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
ENCLOSURE IS TYPE NEMA 3R MATERIAL: 316 STAINLESS STEEL GROUND LUG TO BE PROVIDED INSIDE ENCLOSURE FOR GROUNDING ENCLOSURE TO EQUIPMENT RECOMMENDED INSTALLATION METHOD: 3/8" STAINLESS BOLTS BOLTED COVER CONNECTION NOT SHOWN FOR SAMPLE ONLY, NOT FOR PRODUCTION
PROJECT
SAMPLE
SHEET
TITLE
TRANSFORMER ENCLOSURE
W.O.
PART NO.
XXXX-40-00
DESIGNED K.LYNES
DRAWN K.LYNES
CHECKED
1 1
XXXX APPROVED
DATE
43 3/4 [1111]
43 3/4 [1111]
43 3/4 [1111]
R22 1/4 [565] R22 1/4 [565] R22 1/4 [565] 30°
45°
21 1/2 [546]
S uperi orTra y.com | 6 0 4 . 5 7 2 . 4 4 1 9
21 1/2 [546]
21 1/2 [546]
AXEV-H-30-18-7.625-24 SCALE 1/12
7 5/8 [194]
7 5/8 [194]
7 5/8 [194]
90°
AXEV-H-90-18-7.625-24 SCALE 1/12
AXEV-H-45-18-7.625-24 SCALE 1/12
NOTES 1. 2. CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
VENTILATED COVERS SHOWN AS SOLID FOR CLARITY. DIMENSIONS IN INCHES [mm]
PROJECT
STANDARD FITTINGS 18-7.625 SYSTEM
SHEET
TITLE
STANDARD 24" RADIUS HORIZONTAL FITTINGS
W.O.
PART NO.
SEE VIEW LABELS FOR PART NUMBER
DESIGNED K.LYNES
7
Components & Accesories
DRAWN K.LYNES
CHECKED
APPROVED
1 1
N/A DATE
Components & Accesories 8 R22 3/8 [568]
7 5/8 [194]
30 [762]
30 [762]
R22 3/8 [568]
7 5/8 [194]
45°
AXEV-VI-30-18-7.625-24 SCALE 1/10
21 1/2 [546] AXEV-VI-45-18-7.625-24 8 7 625 24 SCALE 1/10
7 5/8 [194]
R22 3/8 [568]
30 [762]
Integrity, Ingenuity, Innovation
21 1/2 [546]
30°
90°
21 1/2 [546] AXEV-VI-90-18-7.625-24 SCALE 1/10
NOTES 1. 2.
CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
VENTILATED COVERS SHOWN AS SOLID FOR CLARITY. DIMENSIONS IN INCHES [mm]
PROJECT
STANDARD FITTINGS 18-7.625 SYSTEM
SHEET
TITLE
STANDARD 24" RADIUS VERTICAL INSIDE FITTINGS
W.O.
PART NO.
SEE VIEW LABELS FOR PART NUMBER
DESIGNED K.LYNES
DRAWN K.LYNES
CHECKED
APPROVED
1 1
N/A DATE
7 5/8 [194]
7 5/8 [194] 45°
30°
R24 [610] R24 [610]
31 5/8 [803]
21 1/2 [546]
AXEV-VO-45-18-7.625-24 SCALE 1/10
7 5/8 [194]
S uperi orTra y.com | 6 0 4 . 5 7 2 . 4 4 1 9
21 1/2 [546]
31 5/8 [803]
AXEV-VO-30-18-7.625-24 SCALE 1/10
90°
R24 [610]
31 5/8 [803]
21 1/2 [546]
NOTES
AXEV-VO-90-18-7.625-24 SCALE 1/10
1. 2.
CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
VENTILATED COVERS SHOWN AS SOLID FOR CLARITY. DIMENSIONS IN INCHES [mm]
PROJECT
STANDARD FITTINGS 18-7.625 SYSTEM
SHEET
TITLE
STANDARD 24" RADIUS VERTICAL OUTSIDE FITTINGS
W.O.
PART NO.
SEE VIEW LABELS FOR PART NUMBER
DESIGNED K.LYNES
9
Components & Accesories
DRAWN K.LYNES
CHECKED
APPROVED
1 1
N/A DATE
Components & Accesories 10 10 3/4 [273]
10 3/4 [273]
10 3/4 [273]
R33 [838]
R33 [838]
R33 [838]
30°
45°
21 1/2 [547]
21 1/2 [547]
90°
8 [203]
CBSS6-HO-30D-18-8-24R SCALE 1/12
8 [203]
Integrity, Ingenuity, Innovation
21 1/2 [547]
8 [203]
CBSS6-HO-90D-18-8-24R CBSS6 HO 90D 18 8 24R SCALE 1/12
CBSS6-HO-45D-18-8-24R SCALE 1/12
NOTES 1. 2. CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
ALL METALLIC PARTS ARE 316 STAINLESS STEEL ALL DIMENSIONS IN INCHES [mm]
PROJECT
STANDARD FITTINGS 18-8 STAINLESS SYSTEM
SHEET
TITLE
SS HORIZONTAL FITTING
W.O.
PART NO.
SEE VIEW LABELS FOR PART NUMBER
DESIGNED T.NGUYEN
DRAWN K.LYNES
CHECKED
APPROVED
1 1
N/A DATE
8 [203]
4 [102] 60°
R28 [711]
8 [203] 90°
4 [102]
S uperi orTra y.com | 6 0 4 . 5 7 2 . 4 4 1 9
CBSS6-VO-60D-18-8-24R SCALE 1/10
R28 [711]
21 1/2 [546]
NOTES CBSS6-VO-90D-18-8-24R SCALE 1/10
1. 2.
CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
ALL METALLIC PARTS ARE 316 STAINLESS STEEL ALL DIMENSIONS IN INCHES [mm]
PROJECT
STANDARD FITTINGS 18-8 STAINLESS SYSTEM
SHEET
TITLE
SS VERTICAL OUTSIDE FITTING
W.O.
PART NO.
SEE VIEW LABELS FOR PART NUMBER
DESIGNED S. JUNG
11
Components & Accesories
DRAWN K.LYNES
CHECKED
APPROVED
1 1
N/A DATE
Components & Accesories 12 4 [102]
8 [203]
R26 [660]
60°
Integrity, Ingenuity, Innovation
21 1/2 [546] CBSS6-VI-60D-18-8-24R SCALE 1/10
4 [102]
R26 [660]
8 [203]
90°
21 1/2 [546] CBSS6-VI-90D-18-8-24R SCALE 1/10
NOTES 1. 2.
CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
ALL METALLIC PARTS ARE 316 STAINLESS STEEL ALL DIMENSIONS IN INCHES [mm]
PROJECT
STANDARD FITTINGS 18-8 STAINLESS SYSTEM
SHEET
TITLE
SS VERTICAL INSIDE FITTING
W.O.
PART NO.
SEE VIEW LABELS FOR PART NUMBER
DESIGNED T.NGUYEN
DRAWN K.LYNES
CHECKED
APPROVED
1 1
N/A DATE
4 [102]
90°
S uperi orTra y.com | 6 0 4 . 5 7 2 . 4 4 1 9
R28 [711]
126°
R26 [660]
4 [102] 36°
21 1/2 [546] 8 [204]
NOTES 1. 2. CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
ALL METALLIC PARTS ARE 316 STAINLESS STEEL ALL DIMENSIONS IN INCHES [mm]
PROJECT
SAMPLE
SHEET
TITLE
SS VERTICAL SWAN NECK FITTING
W.O.
PART NO.
CBSS6-VO-90D-18-8-24R-SN
DESIGNED K.LYNES
13
Components & Accesories
DRAWN K.LYNES
CHECKED
APPROVED
1 1
XXXX DATE
Components & Accesories 14 ITEM 1
QTY 1
2 3
2 3
PART NUMBER DES-PLT-18-8
DESCRIPTION DRY EQUIPMENT SEAL PLATE FOR 18X8 BUS
WS-STUB-BEND DSB-ASM-2-116
SEAL STUB DRY SEAL BLOCK 2X2
1
GUIDE TYPE MAY CHANGE DEPENDING ON ACTUAL CABLE DIAMETER
Integrity, Ingenuity, Innovation
3 2
ISOMETRIC SCALE 1 / 7
24 [610] 3 1/16 [77] BLOCK EDGE
17 7/8 [455]
6 3/8 [163]
4 3/16 [107]
14 [356]
9 13/16 [250]
3 1/2 [88]
20 9/16 [521]
4 1/4 [108] 3 13/16 [97] BLOCK BOTTOM
FRONT SCALE 1 / 7
SIDE SCALE 1 / 7
BACK SCALE 1 / 7
NOTES 1. 2. 3.
ALL FABRICATED METALLIC PARTS ARE ALUMINUM DIMENSIONS ARE IN INCHES [mm] RECOMMENDED INSTALL METHOD: 3/8" STAINLESS BOLTS WITH BUTYL SEALANT OR RUBBER GASKET INTERFACE BETWEEN EQUIPMENT AND PLATE
CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
PROJECT
STANDARD DRY EQUIPMENT SEAL
SHEET
TITLE
DRY EQUIPMENT SEAL 18 X 8 SYSTEM
W.O.
PART NO.
DES-18-8-116
DESIGNED M.COX
DRAWN K. MELNIKOV
CHECKED
APPROVED
1 1
N/A DATE
23 1/2 [597]
WALL PLATE IS 316 STAINLESS STEEL
ITEM
QTY
1 2 3 4
2 1 2 3
PART NUMBER WS-CNL-2-BEND-14 DWS-PLT-18-8-SS WS-STUB-2-BEND-SS DSB-ASM-2-116
DESCRIPTION WALL SEAL CHANNEL STAINLESS DRY WALL SEAL PLATE FOR 18X8 BUS STAINLESS SEAL STUB DRY SEAL BLOCK 2X2
2 3 1
10 [254] GUIDE MAY CHANGE DEPENDING ON ACTUAL CABLE DIAMETER RECOMMENDED WALL CUTOUT SCALE 1/15
WALL SEAL CHANNELS ARE ALUMINUM
4
STUBS ARE 316 STAINLESS STEEL
S uperi orTra y.com | 6 0 4 . 5 7 2 . 4 4 1 9
ISOMETRIC SCALE 1/10 30 [762] 23 9/16 [598]
STUBS ARE TRIMMED TO ALLOW ATTACHMENT TO VERTICAL FITTING
6 1/2 [164]
17 7/8 [455] 6 1/16 [154] BLOCK EDGE
13 3/16 [335]
7 3/16 [182]
20 [508]
12 13/16 [326]
LENGTH DEPENDENT ON WALL THICKNESS
4 1/4 [108] SIDE SCALE 1 / 8
BACK SCALE 1 / 8
6 13/16 [173] BLOCK BOTTOM
FRONT SCALE 1 / 8
NOTES 1. 2. 3. 4.
5. 6.
WALL PLATE AND STUBS ARE 316 STAINLESS STEEL, WALL CHANNELS ARE ALUMINUM ALL HARDWARE IS 316 STAINLESS STEEL DIMENSIONS ARE IN INCHES [mm] FOR FIRESTOP WALL/FLOOR SEAL INSTALLATION SEE DRAWINGS: DRY WALL/FLOOR SEAL FIRESTOP 18 X 8 SYSTEM AND FIRESTOP PILLOW INSTALLATION RECOMMENDED INSTALL METHOD: 3/8" CONCRETE ANCHORS WITH BUTYL SEALANT OR RUBBER GASKET INTERFACE BETWEEN WALL AND PLATE DRY SEAL DOES NOT REQUIRE SILICONE OR BUTYL SEALANT ON SEAL BLOCKS OR AROUND CABLES DURING INSTALLATION
CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
PROJECT
SAMPLE
SHEET
TITLE
DRY WALL SEAL - STAINLESS
W.O.
PART NO.
DWS-18-8-116-SS
DESIGNED K.LYNES
15
Components & Accesories
DRAWN K.LYNES
CHECKED
1 1
N/A APPROVED
DATE
Components & Accesories 16 GUIDE COLOR CODE CODE
COLOR
096
GREEN
106
BLACK
116
YELLOW
126
ORANGE
136
BLUE
3
ITEM 1 2 3
2
QTY 1 A/R 2
PART NUMBER DWS-18-8-STS SSBXX WS-BP-18-8
DESCRIPTION DRY WALL/FLOOR SEAL FOR 18 X 8 BUS FIRESTOP PILLOW BACKING PLATE
NOTE: ITEM 2 PART NUMBER XX WILL CHANGE ACCORDING TO SIZE OF FIRESTOP PILLOW SUPPLIED
1
Integrity, Ingenuity, Innovation
SUPPLIED FIRESTOP PILLOW SIZES AND QUANTITIES ARE BASED ON RECOMMENDED WALL CUTOUT SIZE
NOTE: CABLE BUS REMOVED FOR CLARITY
EXPLODED VIEW SCALE 1/15
10 [254]
23 1/2 [597]
RECOMMENDED WALL/FLOOR CUTOUT SCALE 1/15
FRONT VIEW SCALE 1/15
SIDE VIEW SCALE 1/15
NOTES 1. 2. 3.
DRY WALL/FLOOR SEAL FIRESTOP PART NUNBER WILL HAVE A 3 DIGIT NUMBER IN PLACE OF STS. THIS NUMBER REPRESENTS THE COLOR CODED GUIDES BASED ON CABLE DIAMETER. COLORS LISTED IN GUIDE COLOR CODE TABLE FIRESTOP RATING: 2 HOURS DIMENSIONS IN INCHES [mm]
CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
PROJECT
DRY WALL/FLOOR SEAL
SHEET
TITLE
DRY WALL/FLOOR SEAL FIRESTOP 18 X 8 SYSTEM
W.O.
PART NO.
DWSF-18-8-STS
DESIGNED M.COX
DRAWN K.LYNES
CHECKED
APPROVED
1 2
N/A DATE
WALL THICKNESS 9 [229] AND LARGER
PACK FIRESTOP PILLOWS INTO CAVITY AS PER MANUFACTURER DATASHEET
OFFSET WALL PLATE MUST BE USED FOR WALL/FLOOR THICKNESS LESS THAN 9" [229]
S uperi orTra y.com | 6 0 4 . 5 7 2 . 4 4 1 9
FLAT WALL PLATE
8 [203]
6 [152]
3 [76] NOTE: CABLE BUS REMOVED FOR CLARITY
1 [25]
BACKING PLATE OFFSET WALL/FLOOR THICKNESS PLATE OFFSET ≥9" [229] 0" [0] 8" [203] 1" [25] 7" [178] 2" [51] 6" [152] 3" [76] 5" [127] 4" [102]
LENGTH OF OFFSET DEPENDS ON WALL/FLOOR THICKNESS OFFSET WALL PLATES
CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
PROJECT
DRY WALL/FLOOR SEAL
SHEET
TITLE
DRY WALL/FLOOR SEAL FIRESTOP 18 X 8 SYSTEM
W.O.
PART NO.
DWSF-18-8-STS
DESIGNED M.COX
17
Components & Accesories
DRAWN K.LYNES
CHECKED
APPROVED
2 2
N/A DATE
Components & Accesories 18 LENGTH OF OFFSET DETERMINED BY WALL THICKNESS 15 [381]
5 [127]
8 [203] 5 [127]
20 [508]
Integrity, Ingenuity, Innovation
6 [152]
7 1/2 [191]
ISOMETRIC SCALE 1 / 4
FRONT SCALE 1 / 4
4X 5/16 [8] THRU
NOTES
SIDE SCALE 1 / 4
1. 2.
MATERIAL: ALUMINUM RECOMMENDED INSTALL METHOD: 1/4" CONCRETE ANCHORS OFFSET BACKING PLATES ARE SIDE SPECIFIC, RIGHT SIDE 3. BACKING PLATE IS A MIRROR IMAGE OF THE LEFT SIDE BACKING PLATE SHOWN ABOVE 'X' IN PART NUMBER REFERS TO THE BACKING PLATE OFFSET IN 4. INCHES 5. 'L' IN PART NUMBER REFERS TO LEFT SIDE BACKING PLATE SHEET 1 1 PROJECT OFFSET FIRESTOP BACKING PLATE
CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
TITLE
BACKING PLATE
PART NO.
WS-BPL-18-8-X
DESIGNED T.NGUYEN
DRAWN K.LYNES
W.O.
N/A CHECKED
APPROVED
DATE
ITEM 1 2 3 4
LENGTH
DESCRIPTION SIDE RAIL RUNG BOTTOM COVER TOP COVER
4
TOP SCALE 1/15
A 3
SPLICE PLATE OUTSIDE ENCLOSURE (2) PER CONNECTION
18 [457] MAX RUNG SPACING SIDE SCALE 1/15
1 5/8 [41]
CABLE GUIDES PRE-INSTALLED
SS-B100 BOLT INSIDE ENCLOSURE (12) PER CONNECTION
TOP SUPPORT BLOCK
MIDDLE SUPPORT BLOCK
A
B
C
A
B
C
C
A
B
C
A
B
SUPPORT BLOCK SPACING: MAX 36 [914] HORIZONTAL SECTIONS MAX 18 [457] VERTICAL SECTIONS 2. CABLE: 500 MCM MV-105 COPPER EPR/PVC OKOGUARD-OKOSEAL OKONITE 114-23-3846 4 CONDUCTORS/PHASE, 0 CONDUCTORS/NEUTRAL 3. TERMINATION: 3M 7624-T-110 INDOOR 4. LUG: ILSCO PN CLND-500-12-134 5. SYSTEM WEIGHT (HORIZONTAL) : 34.2 LB./FT. [51.0 KG/M] SYSTEM WEIGHT (VERTICAL) : 35.1 LB./FT [52.3 KG/M] 6. SHORT CIRCUIT: 65 kA / 60 CYCLES 7. GROUND CABLE: #4/0 COPPER 8. MATERIAL: ALL METALLIC PARTS ARE ALUMINUM CABLE SUPPORT MATERIALS: 30% GLASS FIBER REINFORCED PBT 9. BLOCKS WITH HDPE CABLE GUIDES 10. FOR SAMPLE ONLY, NOT FOR PRODUCTION SHEET 1 1 PROJECT SAMPLE SYSTEM CUT SHEET
3 [76] 18 [457] 21 1/2 [546]
CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
19
System Cut Sheets
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
NOTES 1.
MFIGB-25 GROUND CLAMP # 4/0 CU GROUND/BOND CABLE
PHASE ARRANGEMENT SCALE 1 /4
DETAIL A SCALE 1 / 8
SS-N100 NUT OUTSIDE ENCLOSURE (12) PER CONNECTION
BOTTOM SUPPORT BLOCK PRE-INSTALLED
3 [76]
6 [152]
S uperi orTra y.com | 6 0 4 . 5 7 2 . 4 4 1 9
2 1
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
TITLE
ALUMINUM SYSTEM CUT SHEET
PART NO.
5kV-3WIRE-2600A
DESIGNED T.NGUYEN
DRAWN T. NGUYEN
CHECKED M.COX
W.O.
XXXX APPROVED M.COX
DATE
System Cut Sheets 20 ITEM 1 2 3 4
LENGTH 118 [2997] MAX
DESCRIPTION SIDE RAIL RUNG BOTTOM COVER TOP COVER
4
TOP SCALE 1/25 2
A 1
2 [51]
SIDE SCALE 1/25
CABLE GUIDES PRE-INSTALLED DETAIL A SCALE 1 / 8
TOP SUPPORT BLOCK
A
B
A
C
B
NOTES
MIDDLE SUPPORT BLOCK
C
1.
SUPPORT BLOCK SPACING: MAX 36 [914] HORIZONTAL SECTIONS MAX 18 [457] VERTICAL SECTIONS 2. CABLE: 500 MCM MV-105 COPPER EPR/PVC OKOGUARD-OKOSEAL OKONITE 114-23-3846 4 CONDUCTORS/PHASE, 0 CONDUCTORS/NEUTRAL 3. TERMINATION: 3M 7624-T-110 INDOOR 4. LUG: ILSCO PN CLND-500-12-134 5. SYSTEM WEIGHT (HORIZONTAL) : 41.1 LB./FT. [61.2 KG/M] SYSTEM WEIGHT (VERTICAL) : 42.0 LB./FT [62.5 KG/M] 6. SHORT CIRCUIT: 65 kA / 60 CYCLES 7. GROUND CABLE: #4/0 COPPER 8. MATERIAL: ALL METALLIC PARTS ARE 316 STAINLESS STEEL CABLE SUPPORT MATERIALS: 30% GLASS FIBER REINFORCED PBT 9. BLOCKS WITH HDPE CABLE GUIDES 10. FOR SAMPLE ONLY, NOT FOR PRODUCTION SHEET 1 1 PROJECT SAMPLE SYSTEM CUT SHEET
BOTTOM SUPPORT BLOCK PRE-INSTALLED
3 [76]
6 [152]
Integrity, Ingenuity, Innovation
3
A
C
C
B
A
MFIGB-25 GROUND CLAMP # 4/0 CU GROUND/BOND CABLE
B
3 [76] 18 [457] 21 1/2 [546]
PHASE ARRANGEMENT SCALE 1 /4
CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
TITLE
STAINLESS SYSTEM CUT SHEET
PART NO.
5KV-3WIRE-2600A
DESIGNED K.LYNES
DRAWN T. NGUYEN
CHECKED M.COX
W.O.
XXXX APPROVED M.COX
DATE
General Each Superior Bus system has been designed with efficiency as a top priority and analyzed with FEA. We produce Cable bus systems that meet all requirements set by the CSA and UL. This report goes over the results obtained through FEA covering electrical, thermal and electromagnetic analysis.
Certifications � CSA cer��ed Cable Bus system � CSA cer��ed fully ven�lated system � Cable bus enclosure is UL cer�fed as grounding conductor � FT4 rated insulated conductors with both CSA and UL cer��ca�on
System Specifications System Ampacity 2600A
Continuous rating Allowable cable ampacity (as per ambient & max temp.) Conductors per phase Frequency
WIRE 3
MCM 500
AMBIENT 40
MAX TEMP. 90
2600A 695A 4 60 Hz
S uperi orTra y.com | 6 0 4 . 5 7 2 . 4 4 1 9
Analysis
System Voltage 5000V
21
Thermal Analysis The temperature of each conductor in our Superior Bus system will not exceed the rated maximum temperature under specified conditions. By maintaining a system under that temperature, the operating life of the Superior Bus system can be maximized without fear of insulation failure or loss of integrity.
CONDUCTOR Kelvins Degrees 째C 361.74 89
INSULATOR Kelvins Degrees 째C 357.77 85
ENCLOSURE AIR LEAVING ENCLOSURE Kelvins Degrees 째C Kelvins Degrees 째C 323.33 50 324.27 51
Temperature T (K) 362.0
357.1
352.2
347.3
Analysis
342.4
337.5
332.6
327.7
322.8
317.9
313.0
22
Integrity, Ingenuity, Innovation
Electrical Analysis For high efficiency and system balance, an in depth electrical analysis of the Superior Bus system is performed. As with all AC carrying conductors, proximity and skin effect greatly affects phase arrangement. Each Superior Bus system is arranged to provide the lowest possible impedance and volt drop for each run.
Current (A) running at continuous A1 638.48 C3 653.13
B1 650.70 A3 669.15
2600A C1 637.66 B3 676.91
A2 641.95 C4 664.22
B2 643.03 A4 654.72
C2 658.97 B4 633.39
A V drop B V drop C V drop 3.69 3.81 3.55
Volt drop per 100 ft (V)
Impedance per 100 ft (mâ„Ś) B1 5.85 A3 5.52
C1 5.57 B3 5.63
Phase A 1.42
Joule Heat per 100 ft (W)
A2 5.76 C4 5.34
Phase B 1.46
B2 5.92 A4 5.64
C2 5.39 B4 6.02
Analysis
A1 5.79 C3 5.43
Phase C 1.36
Conductors Enclosure Shielding 13788.13 737.13 1367.03
S uperi orTra y.com | 6 0 4 . 5 7 2 . 4 4 1 9
23
EMF/EMI Analysis Power distribution systems will generate electromagnetic interference (EMI) which is highly undesirable in data centers and around EMI sensitive equipment. Each Superior Bus system is designed to minimize EMI generation due to internal field cancellations.
Distance 12" 24" 36" 48"
Flux Density 267.67 [mG] 92.06 [mG] 39.26 [mG] 18.57 [mG]
DISTANCE VS FLUX DENSITY (2600 A)
Analysis
FLUX DENSITY [MILLIGAUSS]
100000 10000 1000 100 10 1 0
10
20
30 DISTANCE [ INCHES ]
24
Integrity, Ingenuity, Innovation
40
50
60
ALL SAMPLE PACKAGES INCLUDE: S uperi orTra y.com | 6 0 4 . 5 7 2 . 4 4 1 9
- CABLE PRODUCT DATA SHEET - COMPRESSION LUG DATA SHEET - COLD SHRINK TERMINATION DATA SHEET (IF APPLICABLE) - FIRESTOP PILLOW DATA SHEET (IF APPLICABLE) - ANY OTHER RELEVANT PRODUCT DATA SHEETS
NOTES 1. CERTIFICATIONS TOLERANCES U.N.O. ± 1/16IN
DESIGNED AND MADE IN NORTH AMERICA.
25
Additional Information
NOTICE: THIS DRAWING SHALL REMAIN PROPERTY OF SUPERIOR TRAY SYSTEMS INC. AND IS SUBJECT TO RECALL AT ANY TIME. MATERIALS DESCRIBED HEREIN OR PARTS THEREOF MAY NOT BE REPRODUCED, USED, MANUFACTURED OR PUBLICIZED WITHOUT PERMISSION OF SUPERIOR TRAY SYSTEMS INC.
#12-13025 84TH AVENUE SURREY, BC V3W 1B3 CANADA
PH 604-572-4419 FX 604-572-4416
FOR SAMPLE ONLY, NOT FOR PRODUCTION
PROJECT
SHEET
TITLE
W.O.
PART NO. DESIGNED
DRAWN
CHECKED
APPROVED
DATE
1 1
Superior Tray Systems Inc. 7331 Vantage Way Delta, BC, V4G 1C9 Canada Tel: +1-604-572-4419 Email: info@superiortray.com Web: www.superiortray.com
26
superiortray.com Integrity, Ingenuity, Innovation Integrity, Ingenuity, Innovation