STRUCTURE magazine | 2017 Trade Show in Print

2017 TRADE SHOW IN PRINT

ST R U C T U R E

®

A Joint Publication of NCSEA | CASE | SEI

Clark University Alumni & Student Engagement Center

by Architerra with Odeh Engineers

CONTENTS STRUCTURE ®

Trade in PRINT Print 22017 TRADEShow SHOW IN 017

Digital Edition available at: www.STRUCTUREmag.org

A Joint Publication of NCSEA | CASE | SEI

Welcome to STRUCTURE magazine’s 10th Annual TRADE SHOW IN PRINT, the definitive resource for practicing structural engineers. ®

Associations

4

Software

7

STRUCTURE ® is the practicing engineer’s essential source for information on materials, methods, design and analysis techniques and tools, research, building construction and innovation. The TRADE SHOW IN PRINT provides an additional level of information, a categorical listing of unique resources including contact information for each company.

Foundations

21

SUPPORTING ORGANIZATIONS

Masonry

21

Anchors

27

Bridges

30

Steel

33

Seismic

40

Concrete

42

Wood

47

NCSEA

STRUCTURAL ENGINEERING INSTITUTE

National Council of Structural Engineers Associations

EDITORIAL STAFF Executive Editor Alfred Spada aspada@ncsea.com

Associate Publisher Nikki Alger nalger@STRUCTUREmag.org

Publisher Christine M. Sloat, P.E. csloat@STRUCTUREmag.org

Creative Director Tara Smith graphics@STRUCTUREmag.org

Advertorial content is the opinion of the advertiser. Publication of any article, image or advertisement in STRUC TUR E ® magazine does not constitute endorsement by NCSEA, CASE, SEI, the Publisher, or the STRUC T U R E ® Editorial Board. Authors, contributors, and advertisers retain the sole responsibility for their submissions.

STRUCTURE ® (Volume 24, Number 13). ISSN 1536-4283. Publications Agreement No. 40675118.

Owned by the National Council of Structural Engineers Associations and published in cooperation with CASE and SEI.

ADVERTISING SALES REPRESENTATIVES Western Representative Denis O’Malley 203-356-9694, ext. 13 domalley@STRUCTUREmag.org

Eastern Representative Joe Murphy 203-254-9595 jmurphy@STRUCTUREmag.org

STRUCTURE magazine

3

TRADE SHOW

IN

PRINT 2017

ASSOCIATIONS/ORGANIZATIONS

American Institute of Steel Construction Phone: 312-670-2400 Web: www.aisc.org Description: Serving the structural steel design community and construction industry in the U.S., AISC is the leader in structural-steel-related technical and market-building activities.

American Shotcrete Association Phone: 248-848-3780 Web: www.shotcrete.org Description: A non-profit organization of contractors, suppliers, manufacturers, designers, engineers, owners, and others with a common interest in promoting the use of shotcrete. ASA provides training, qualification, certification, education, networks, and leadership to increase the acceptance, quality, and safe practices of the shotcrete process.

American Wood Council Phone: 202-463-2766 Web: www.awc.org Description: An extensive offering of ANSI standards including the 2015 National Design Specification® for Wood Construction, 2015 Special Design Provisions for Wind and Seismic, and 2015 Wood Frame Construction Manual. Partnered with National Council of Structural Engineers Associations (NCSEA) Diamond Review Program to provide continuing education credits.

Brick Industry Assocation Phone: 702-620-0010 Web: www.gobrick.com Description: BIA represents the manufacturers and distributors of brick. BIA provides technical support and design assistance on the use of brick in buildings and pavements.

Canadian Wood Council Phone: 613-747-5544 Web: www.cwc.ca Description: CWC is the national association representing manufacturers of Canadian wood products used in construction. Through its member Associations, the Council represents those manufacturers.

Cold-Formed Steel Engineers Institute Phone: 866-465-4732 Web: www.cfsei.org Description: The mission of the CFSEI is to enable and encourage the efficient design of safe and cost effective cold-formed steel (CFS) framed structures.

Council of American Structural Engineers Phone: 202-682-4377 Web: www.acec.org Description: CASE, a coalition of ACEC, is a national association of structural engineering firms providing a forum for action to improve the quality of structural engineering through enhancement of business practices, decreased professional liability exposure and increased profitability.

National Council of Structural Engineers Associations EN

GINEERS

NCSEA

STRUCTU

RAL

Phone: 312-649-4600 Web: www.ncsea.com Description: NCSEA was formed to constantly improve the level of standard of practice of the structural engineering profession throughout the U.S., and to provide an identifiable resource for those needing communication with the profession.

NATIONAL

O NS

Phone: 847-517-1200 Web: www.crsi.org Description: CRSI is a national trade association that stands as the authoritative resource for information related to steel reinforced concrete construction.

OCIATI

Concrete Reinforcing Steel Institute

Phone: 248-848-3800 Web: www.concrete.org Description: A leading authority and resource worldwide for the development and distribution of consensus-based standards, technical resources, educational and training programs, certification programs, and proven expertise for individuals and organizations involved in concrete design, construction, and materials.

ASS

American Concrete Institute

COUNCIL

National Council of Structural Engineers Associations

NCEES Phone: 864-654-6824 Web: www.ncees.org Description: Save yourself time, effort, and paperwork by consolidating your credentials for multiple jurisdictions online in an NCEES Record, a centralized means of storing and transmitting materials used in the comity licensure process.

International Association of Plumbing and Mechanical Officials

Portland Cement Association

Phone: 909-472-4100 Web: www.iapmo.org Description: The IAPMO Group provides code development assistance, industry-leading education, and a manufacturer-preferred quality assurance program. IAPMO develops the Uniform Plumbing Code ® and Uniform Mechanical Code ®.

Phone: 847-966-6200 Web: www.cement.org Description: The Portland Cement Association represents cement companies in the U.S. and Canada.

It conducts market development, engineering, research, education, and public affairs programs.

International Code Council

Phone: 248-848-3180 Web: www.post-tensioning.org Description: PTI is nonprofit organization for the advancement of post-tensioned, prestressed concrete design and construction.

Post Tensioning Institute

Phone: 800-786-4452 Web: www.iccsafe.org Description: A member-focused association dedicated to developing model codes, standards and related resources used to construct safe structures. ICC’s International Codes® are a comprehensive, coordinated set of building safety codes that benefit public safety and support the industry’s need for one set of codes without regional limitations.

The Masonry Society (TMS) Phone: 303-939-9700 Web: www.masonrysociety.org Description: A non-profit, professional organization of volunteer members, dedicated to the advancement of masonry knowledge. Through our members, all aspects of masonry are discussed. The results are disseminated to provide guidance to the masonry and technical community on various aspects of masonry design, construction, evaluation, and repair.

National Concrete Masonry Association Phone: 703-713-1900 Web: www.ncma.org Description: NCMA is the national trade association representing the concrete masonry industry... technical research, marketing, government relations and communications activities.

Listings are provided as a courtesy, STRUCTURE magazine is not responsible for errors.

STRUCTURE magazine

4

TRADE SHOW

IN

Precast/Prestressed Concrete Institute Phone: 312-786-0300 Web: www.pci.org Description: PCI is an organization dedicated to fostering greater understanding and use of precast and prestressed concrete.

Steel Deck Institute Phone: 847-458-4647 Web: www.sdi.org Description: The SDI/ANSI Standards for Steel Roof Deck, Composite Floor Deck and Non-Composite Steel Floor Deck are now available for FREE download. These standards are suitable for reference use in project specifications by the design community.

The Steel Joist Institute Phone: 843-407-4091 Web: www.steeljoist.org Description: A not-for-profit organization that sets standards for the steel joist industry and helps building code bodies to develop code regulations.

Structural Engineering Institute STRUCTURAL Phone: 800-548-2723 ENGINEERING INSTITUTE Web: www.seinstitute.org Description: SEI is an organization of structural engineers within ASCE, serving the structural engineering community. SEI provides networking opportunities, and stimulates coordination and understanding between academia and practicing engineers.

PRINT 2017

Design wood structures effectively, economically and with ease!

Design Office

SIZER Gravity Design

2x4

DATABASE EDITOR Customize Materials

SHEARWALLS Lateral Design

PDF

Adobe

WOOD STANDARDS

(US version)

CONNECTIONS Fasteners

PDF

Adobe

WOOD STANDARD (CDN version)

Download a Free Demo at woodworks-software.com

AMERICAN WOOD COUNCIL

US Design Office 11

Canadian Design Office 9

NDS 2015, SDPWS 2015, IBC 2015 and ASCE 07-10 compliant

CSA O86-14 and NBC 2010 compliant

Use Promo Code STRUCMAG and receive a 10% discount towards your purchase!

www.woodworks-software.com

800-844-1275

SOFTWARE ADAPT Corporation

Phone: 650-218-0008 Email: florian@adaptsoft.com Web: www.adaptsoft.com Product: PTRC Description: An indispensable production tool for the fast and easy design of concrete slabs of any form, beams, and beam frames. Uses equivalent frame method to design post-tensioned or conventionally reinforced projects. Easily switch between PT and RC modes. Updated with ACI 318-14 / IBC 2015.

Product: Edge Tributary Load Takedown Description: Edge offers fast and reliable gravity load takedown of concrete structures. Easily model buildings from scratch or import from Revit. No need for FEM solution or complicated analytical modeling; just simple and fast results. Integrates with comprehensive column design module.

Product: Builder Shear Wall Design Description: Builder offers the only fully integrated solution for the design of complete concrete buildings using one model: gravity design of reinforced concrete or post-tensioned floor systems, lateral analysis, column design, shallow foundation design, and automated inclusion of lateral frame actions in slab and foundation design.

American Wood Council

Phone: 202-463-2766 Email: info@awc.org Web: www.awc.org Product: Connection Calculator Description: Provides users with a web-based approach to calculating capacities for single bolts, nails, lag screws and wood screws per the 2005 NDS. Both lateral (single and double shear) and withdrawal capacities can be determined. Wood-to-wood, wood-to-concrete, and wood-to-steel connections are possible.

Applied Science International, LLC

Phone: 919-645-4090 Email: support@appliedscienceint.com Web: www.extremeloading.com Product: Extreme Loading for Structures 5.0 Description: A new advanced level of nonlinear dynamic structural analysis. Allows users to efficiently study structural failure from any number of actual or possible extreme events. Users can easily model highrise structures composed of reinforced concrete, steel composite and other structures with all as-built and as-damaged details.

Product: SteelSmart System 8.0 Description: SSS provides construction professionals with an essential tool engineered for both fast and accurate design. Available design modules include: Curtain Wall, Load Bearing Wall, X-Brace Shear Wall, Floor Framing, Roof Framing, Roof Truss, and Moment-Resisting Short Wall.

BIM | Bridges | Building Components | CAD | Concrete Foundations/Retaining Walls | General Packages/Suites Light Gauge Steel | Masonry | Steel | Wood

ASDIP Structural Software

CADRE Analytic

Phone: 407-284-9202 Email: support@asdipsoft.com Web: www.asdipsoft.com Product: ASDIP Suite Description: For more than two decades, ASDIP has provided state-of-the-art design tools for structural engineers. Footings, bearing walls, composite beams, concrete and steel columns, retaining walls, base plates, continuous beams, anchoring to concrete, and much more can be designed with our products.

Phone: 425-392-4309 Email: jimhaynes@cadreanalytic.com Web: www.cadreanalytic.com Product: Zipwire Description: Classic single hanging cable application for point loads on taut cables or distributed loads on slack cables. Includes consideration of the slope and elasticity of the cable and flexibility of the end supports.

Autodesk®, Inc.

Phone: 415-580-3872 Email: vanessa.bertollini@autodesk.com Web: www.autodesk.com Product: Steel Connections for Revit® Description: Provides access to a variety of parametric steel connections in Revit software, enabling connections to be modeled with a higher level of detail. This helps bridge the gap between design and fabrication. Both members and connections can be synchronized between Revit and Advance Steel for detailing.

Product: Advance Steel Description: Easy-to-use and comprehensive software for structural steel detailing built on the AutoCAD® platform. Intelligent 3D modeling tools help you accelerate more accurate design and detailing. Help speed time-to-fabrication by automatically generating shop drawings and deliverables. Interoperability with Autodesk® Revit® software supports a more connected BIM workflow.

Bentley Systems, Inc.

Phone: 800-BENTLEY Email: Samantha.Langdeau@bentley.com Web: www.bentley.com Product: STAAD.Pro Description: Ensure on time and on budget completion of steel, concrete, timber, aluminum, and cold-formed steel projects, regardless of complexity.

Confidently design structure anywhere in the world using over 80 international codes, reducing your team’s need to learn multiple software applications.

Product: Pro Description: Finite element structural analysis application. Loading conditions include discrete, pressure, hydrostatic, seismic, and dynamic response.

Features for presenting displaying, plotting, and tabulating extreme loads and stresses across the structure and across multiple load cases simultaneously. Basic code checking for steel, wood, and aluminum.

Concrete Masonry Association of California and Nevada

Phone: 916-722-1700 Email: info@cmacn.org Web: cmacn.org Product: CMD15 Design Tool for Masonry Description: Structural design of reinforced concrete and clay hollow unit masonry elements for design of masonry elements in accordance with provisions of Ch. 21 2010 through 2016 CBC or 2009 through 2015 IBC and 2008 through 2013 Building Code Requirements for Masonry Structures (TMS 402/ACI 530/ASCE 5).

Design Data

Phone: 402-441-4000 Email: sales@sds2.com Web: www.sds2.com Product: SDS/2 Description: Provides automatic detailing, connection design, and other data for the steel industry’s fabrication, detailing, and engineering sectors. SDS/2’s data sharing between all project partners reduces the time required to design, detail, fabricate and erect steel.

DEWALT Engineered by Powers

Product: RAM Elements Description: Analyze and design, including quickly performing 3D finite elements analysis, of almost any type of structure or structural component. Save time and money by performing your daily design tasks for all of your building projects, simple or complex, all within a single easy to learn and use application.

Phone: 510-364-6263 Email: jacob.olsen@sbdinc.com Web: dewalt.com Product: HangerWorks Plug-in Description: A tool that automates the placement and engineering design of hangers and seismic bracing for MEP systems such as duct, pipe, conduit, and cable tray. Prefabrication sheets, bill of materials, total station layout points, and engineering reports such as point load calculations are included. continued on page 11

Not listed? All 2017/2018 Resource Guide forms, including the 2018 TRADE SHOW IN PRINT, are now available on our website. www.STRUCTUREmag.org.

STRUCTURE magazine

7

TRADE SHOW

IN

PRINT 2017

F O E

E H T

C N E

R E F

F I D

Software that

CONNECTS.

The implementation of SDS/2, has bolstered Delta Structural Steel Services’ ability to elevate the quality of product that we offer our clientele. Prior to SDS/2, Delta was using another popular CAD program of which we were becoming increasingly disappointed. Our initial investment in SDS/2 began with two seats, and we have since grown to 17. Because of their outstanding product development and impeccable customer service, they helped make Delta Structural Steel Services a multi-million dollar business.”

Paul Hemenway CM-BIM Estimating/Production Manager, Delta Structural Steel Services

1501 Old Cheney Rd., Lincoln, NE 68512 // 1-800-443-0782 // sds2.com

1501 Old Cheney Rd., Lincoln, NE 68512 // 1-800-443-0782 // sds2.com

RFEM 5 FEA Structural Analysis Software

Powerful, Easy, and Intuitive © www.timberstructures.cz

© www.rubner.com

© www.timberstructures.cz

© www.wernersobek.de

© www.stutzkiengineering.com

© www.novumstructures.com

Nonlinear Analysis

CLT

Steel

Glass

Concrete

Form-Finding

Timber

Dynamic Analysis

Aluminum

BIM Integration

© www.dbc.no

DOWNLOAD FREE 90-DAY TRIAL

© www.timberstructures.cz

Structural Analysis & Design Software Dlubal Software, Inc.

www.dlubal.com

30 South 15 th Street, 15 Floor, Philadelphia, PA 19102

Tel.: (267) 702-2815

info-us@dlubal.com

SOFTWARE Dlubal Software Inc.

Phone: 5267-702-2815 Email: info-us@dlubal.com Web: www.dlubal.com Product: RFEM Description: Non-linear FEA software complete with LRFD and ASD design of hot-rolled steel according to AISC, CSA, and other international standards. Serviceability deflection checks, tapered and curved beam design, and automatic crosssection optimization. Stress analysis and design of steel surface and shell elements available, including optimization and serviceability checks.

Product: SHAPE-THIN / SHAPE-MASSIVE Description: Calculates the section properties of custom open, closed, built-up, and non-connected thin-walled cross-sections consisting of one or more materials. Perform an elastic or plastic stress analysis including torsion effects. Determines section properties of thick-walled cross-sections and performs a full stress analysis. Optimal integration with RFEM for further structural analysis.

ENERCALC, Inc.

Phone: 800-424-2252 ENERCALC Email: info@enercalc.com Web: https://enercalc.com Product: Structural Engineering Library / Retain Pro / ENERCALC 3D / ENERCALC SE Description: ENERCALC’s Structural Engineering Library has been a design staple for over 3 decades.

Now you can design anywhere using “ENERCALC SE,” our cloud-based structural engineering application suite. Delivers our Structural Engineering Library, RetainPro, and ENERCALC 3D (Finite Element analysis and design software) on any device.

IES, Inc.

Phone: 800-707-0816 Email: info@iesweb.com Web: www.iesweb.com Product: VisualAnalysis Description: When you need answers, get them from models that are easy to create in IES structural software. VisualAnalysis is an excellent value for engineers who solve frames, trusses, or just about any kind of civil/structural problems. IES offers free videobased training and email technical support.

Integrity Software, Inc.

Phone: 512-372-8991 Email: sales@softwaremetering.com Web: www.softwaremetering.com Product: SofTrack Description: Save money on monthly, quarterly and annual Bentley® license fees! SofTrack provides automatic control to prevent over-usage of Bentley licenses. Ensure licensed Bentley applications are used within your license limits. SofTrack includes support for all Bentley licensing policies. Automatically block usage of Bentley products you do not own.

Phone: 281-890-4566 Email: query.icas@intergraph.com Web: www.coade.com/products/gtstrudl Product: GT STRUDL® Description: For more than 45 years, structural engineers have trusted GT STRUDL for their structural analysis. The software offers a comprehensive frame and finite element analysis solution for steel and concrete designs. GT STRUDL includes all the tools necessary to analyze a variety of structural engineering and finite element analysis problems.

Losch Software Ltd

Hexagon PPM

MDX Software

Phone: 214-448-9462 Email: geoffrey.blumber@hexagon.com Web: www.coade.com/products/gtstrudl Product: GT STRUDL® Description: Intergraph’s structural analysis and design modeling software; a market leader in its field for nonlinear and linear dynamic and static analysis.

A strategic database approach to all model data and analysis results, and fast, high-quality results.

Meca Enterprises Inc.

Phone: 918-258-2913 Email: support@mecaenterprises.com Web: www.mecaenterprises.com Product: MecaStack Software Description: Widely used software for designing self-supported and guy wire supported steel stacks. An easy to use Windows based interface allows designers to quickly model a stack. Load combinations and factors can be customized as needed. The output is easy to navigate and problem areas can be located quickly.

Mka Software and Engineering

Phone: 90 232 765 91 51 Web: www.mkasteel.com/en Product: Mergen Description: The first, one dimensional nesting software that can take splices into account. Importing NC1 files, 3D simulation with IFC, optimization with the splices’ profiles, placing splices away from clearance holes and welded members, and transferring cutting plans on CAD environment.

MKT Fastening, LLC

Intergraph

GIZA Steel

Phone: 314-656-4615 Email: info@gizasteel.com Web: www.gizasteel.com Product: GIZA Description: Leading connection design software for steel framed structures. Compliant with AISC 13th & 14th editions using either ASD or LRFD methods.

With extensive experience in the New York City market, GIZA also works with NYC building code.

Save up to 80% of design time using GIZA.

BIM | Bridges | Building Components | CAD | Concrete Foundations/Retaining Walls | General Packages/Suites Light Gauge Steel | Masonry | Steel | Wood

Phone: 323-592-3299 Email: loschinfo@gmail.com Web: LoschSoft.com Product: LECWall Description: The industry standard for precast concrete sandwich wall design also handles multi-story columns. LECWall can analyze prestressed and/or mild reinforced wall panels with zero to 100 percent composite action. Flat, hollow-core, or double tee configurations are supported. Complete handling analysis is also included.

Phone: 800-336-1640 Email: sales@mktfastening.com Web: www.mktfastening.com Product: MKT Website Design Software Description: New anchor design software now available to assist with calculations meeting ACI 318 and IBC design requirements. It runs on Windows operating systems; calculates in metric or imperial units for mechanical or adhesive anchoring systems.

Visit the website to download your copy.

New Millennium Building Systems

Phone: 260-969-3582 Email: rich.madden@newmill.com Web: www.newmill.com Product: Steel Joists and Steel Deck Building Systems Description: New Millennium engineers and manufactures a full range of steel building systems.

Including standard steel joists and deck, architecturally unique steel joist and deck systems, Versa-Floor® longspan composite floor systems, and stay-in-place bridge deck. New Millennium is a leader in BIM-based steel building systems supply.

Opti-Mate, Inc.

Phone: 573-446-3221 Email: support@mdxsoftware.com Web: www.mdxsoftware.com Product: MDX Software Description: MDX Software Curved & Straight Steel Bridge Design & Rating is in use by many top design firms and DOTs to design and rate steel girder bridges for compliance with LRFD, LRFR, LFD, and ASD AASHTO Specifications.

Phone: 610-530-9031 Email: optimate@enter.net Web: www.opti-mate.com Product: Bridge Engineering Software Description: Merlin Dash software for analysis, design or rating of bridges with steel and prestressed concrete girders. Descus software for grid analysis and rating of bridges with horizontally curved plate or box girders.

TRAP software for truss bridges and SABRE for sign structures. AASHTO specifications are included. continued on page 15

STRUCTURE magazine

11

TRADE SHOW

IN

PRINT 2017

Start your workday refreshed, with easy structural software from: iesweb.com

17 Visit us at

#128 NCSEA Booth

Barco One Campus © Image Jaspers-Eyers Architects – photography by Mark Detiffe

© Establis

SCIA Engineer 17

Boosting your Productivity ü Intelligent section classification for simple and complex shapes ü Updated steel/composite code checks (AISC & AISI) ü Simplified diaphragms (rigid, flexible, semi-rigid) ü Support for Revit 2018 ü Next generation task management with the connection to Allplan’s bim+ cloud platform ü Usability improvements (optimized workflows, keyboard shortcuts, single-click Excel export, and more) Visit www.scia.net/scia-engineer-17 for more information on the release and to download your FREE trial copy today!

Contact us today to learn more at usa@scia.net SCIA Inc., 7150 Riverwood Drive, Columbia MD 21046, United States, +1 443 671 1431, www.scia.net

SOFTWARE POSTEN Engineering Systems

Phone: 510-275-4750 Email: sales@postensoft.com Web: www.postensoft.com Product: POSTEN X Description: The most efficient and comprehensive post-tensioned concrete software in the world that not only automatically designs the Tendons, Drapes, and Columns, but also produces highly efficient, cost saving, sustainable designs with automatic documentation of material savings for LEED. The others simply Analyze – POSTEN DESIGNS.

RedBuilt

BIM | Bridges | Building Components | CAD | Concrete Foundations/Retaining Walls | General Packages/Suites Light Gauge Steel | Masonry | Steel | Wood

RISA Technologies

S-FRAME Software

Phone: 949-951-5815 Email: info@risa.com Web: risa.com Product: RISAFloor ES Description: RISA offers everything you need for concrete design. For concrete floors, including beams and two way slabs, nothing beats RISAFloor ES for ease of use and versatility. The design of columns and shear walls with RISA-3D offers total flexibility.

Integration between RISA-3D and RISAFloor ES provides a complete building design.

Phone: 604-273-7737 Email: info@s-frame.com Web: s-frame.com Product: S-FOUNDATION Professional 2017 Description: New pile features include soil definitions to calculate deflections, axial forces, compression, and tension along each pile length. Quickly and easily model, auto-detail, and optimize pile supported foundations. Seamlessly transfer model data Analysis or easily import support data from 3rd party analysis software.

SCIA, a Nemetschek Company

Phone: 866-859-6757 Email: info@redbuilt.com Web: www.redbuilt.com Product: RedSpec™ Description: Quickly and efficiently create floor and roof design specifications using Red-I joists, open-web trusses, and RedLam for a variety of applications. A central component is FloorChoice™; allows a floor to be evaluated while still in the design phase, providing an easy-to-understand numerical rating system.

Phone: 443-393-3616 Email: b.follett@scia.net Web: www.scia.net/en Product: SCIA Engineer Description: SCIA Engineer links structural modeling, analysis, design, reporting and interoperability in ONE program. Design and optimize to the most recent AISC, AISI, and international code, including composite beam design.

Learn how you can start boosting your productivity with SCIA Engineer today!

Product: S-FRAME Analysis Description: Model, analyze and design structures regardless of geometric complexity, material type, loading conditions, nonlinear effects, or design codes.

S-FRAME efficiently integrates concrete, foundation, and steel design as well as BIM and DXF data sharing links within a single work environment to ensure maximum productivity.

Listings are provided as a courtesy, STRUCTURE magazine is not responsible for errors.

ADVERTISEMENT–For Advertiser Information, visit www.STRUCTUREmag.org

STRUCTURE magazine

15

TRADE SHOW

IN

PRINT 2017

continued on page 18

Live Instructional Webinars Scheduled Every Wednesday DeWALT HangerWorks plug-in for Autodesk Revit is a tool that automates the placement and engineering design of hangers and seismic bracing for MEP systems such as duct, pipe, conduit and cable tray. Prefabrication sheets, bill of materials, total station layout points and engineering reports such as point load calculations are included.

For additional information or to get started using HangerWorks contact: DWGTP@gogtp.com

THE COMPLETE SOFTWARE FOR ANCHORING TO CONCRETE

Mechanical

Adhesives

Cast-in Place

Tool Bar • New, Save, Open • Report Generation • Application Help

Anchor Tree • Filtering • Comparisons • Calculate All • Documents • Custom Anchor

Design Conditions • Installation Properties • Geometric Constraints • Loading Attributes • Validations • Calculation Summary • Project Details

Result Area • Easy to Read Bar Graphs • Continuous Results updating • Key Geometric Checks

DESIGN

Code compliant anchor designs according to ACI 318-14 and CSA A23.3-14

Visual Model • 3D Graphics • Edit Geometry • Zoom, Pan, Rotate

DOCUMENT

Comprehensive design calculations with multiple reporting options

For more information or if you are interested in Beta testing the software, log on to http://anchors.dewalt.com/dda

Active Anchor • Auto Embedment Optimization • Key Anchor Properties • Fast Switching

ANCHOR

Includes full catalog of DeWALT innovative anchors, standard Cast-in Place and MORE!!

www.DeWALT.com (800) 524-3244 | anchors@dewalt.com

SOFTWARE Simpson Strong-Tie®

Phone: 800-925-5099 Email: web@strongtie.com Web: www.strongtie.com Product: Strong-Wall® Shearwall Selector Description: Helps Designers select the appropriate shearwall solution for a given application in accordance with the latest code requirements.

Product: CFS Designer™ V 2.0.2 Software Description: With the CFS Designer, you can design CFS beam-column members according to AISI specifications and analyze complex beam loading and span conditions. Intuitive design tools automate common CFS systems such as wall openings, shearwalls, floor joists, and, with the newest software update, up to eight stories of load-bearing studs.

Standards Design Group, Inc

Phone: 806-792-5086 Email: info@standardsdesign.com Web: www.standardsdesign.com Product: Wind Loads on Structures Description: WLS4 software allows wind load computations for the ASCE 7-98, 02 or 05, Section 6 and ASCE 7-10, Chapters 26-31. WGD5 performs calculation to design window glass according to ASTM E 1300-09. BRDG 2007 finds its basis in the ASTM F 2248.

Strand7 Pty Ltd

Phone: 252-504-2282 Email: info@strand7.com Web: www.strand7.com Product: Strand7 Description: A general-purpose FEA system comprising integrated pre- and post-processing and solvers. It is used for linear and nonlinear analysis of structures and components (static, dynamic and heat transfer) by engineering companies of all sizes and disciplines. Worldwide acceptance as a powerful tool for structural analysis, particularly nonlinear analysis.

StrucSoft Solutions

Phone: 514-538-6862 Email: a.gordon-stewart@strucsoftsolutions.com Web: strucsoftsolutions.com Product: MWF Description: A template-based and rule-driven extension to Autodesk® Revit® for framing. It empowers users to automate the modeling, clash detection and manufacturing of light gauge steel and wood framing, including shop drawings, cut lists, BOM, CNC output & more.

BIM | Bridges | Building Components | CAD | Concrete Foundations/Retaining Walls | General Packages/Suites Light Gauge Steel | Masonry | Steel | Wood

StructurePoint

Phone: 847-966-4357 Email: info@structurepoint.org Web: www.structurepoint.org Product: Concrete Design Software Suite Description: StructurePoint, formerly the PCA Engineering Software Group, offers concrete design software programs updated to ACI 318-14 for concrete buildings, concrete structures, and concrete tanks. Reinforced concrete structural software includes programs for design of columns, bridge piers, beams, girders, one and two-way slabs, shearwalls, tilt-up walls, mats, foundations, tanks, and slabs-on-grade.

STRUMIS LLC

Phone: +44 (0)133 25458-00 Email: j.hardy@strumis.com Web: www.strumis.com Product: STRUMIS Description: Steel estimating and fabrication management information software which provides unrivalled features and benefits globally. Our software is driven by our continuous collaboration and communication with our customers. Our customers speak; we listen, ensuring the best material and time savings, in turn reducing overheads and increasing efficiency and productivity.

Trimble

Phone: 770-426-5105 Email: kristine.plemmons@trimble.com Web: www.tekla.com Product: Tedds Description: Perform 2D frame analysis, access a large range of automated structural and civil calculations to U.S. codes, and speed up your daily structural calculations.

Product: Tekla Structural Designer Description: Revolutionary software that gives engineers the power to analyze and design buildings efficiently and profitably. Fully automated and packed with many unique features for optimized concrete and steel design. Quick comparison of alternative design schemes, cost-effective change management, and seamless BIM collaboration.

Product: Tekla Structures Description: Create and transfer constructible models throughout the design, from concept to completion.

Allows you to create accurate and informationrich models that reduce RFIs and enable structural engineers proven additional services. Models are used for drawing production, material take offs and collaboration with disciplines like architects, consultants, fabricators and contractors.

The TRADE SHOW

IN

Struware, LLC

Phone: 904-302-6724 Email: email@struware.com Web: www.struware.com Product: Structural Engineering Software Description: Struware provides easy to use structural engineering software. So quick and easy, the software pays for itself the first time you use it. Programs include a wind, seismic, snow, dead and live loadings program, CMU walls, tilt-up concrete walls, steel floor vibration, and concrete beams. Demos at website.

Veit Christoph GmbH

Phone: +49 (0)711 518573-30 Email: info@vcmaster.com Web: www.vcmaster.com/en Product: VCmaster Description: A comprehensive, affordable, userfriendly software solution for compiling professional structural design calculations. Offers a unique combination of reliable calculation capacity and extensive text processing features. Includes numerous predefined design calculations according to AISC and ACI. With VCmaster, engineers can work efficiently while making fewer mistakes.

WoodWorks Software

Phone: 800-844-1275 Email: sales@woodworks-software.com Web: www.woodworks-software.com Product: WoodWorks® Software Description: Conforms to IBC 2015, ASCE 7-10, NDS 2015, SDPWS 2015; SHEARWALLS: designs perforated and segmented shearwalls; generates loads; rigid and flexible diaphragm distribution methods.

SIZER: designs beams, columns, studs, joists up to 6 stories. CONNECTIONS: Wood to: wood, steel or concrete.

Yrtechnosoft

Phone: 581-235-8710 Email: yves.rossignol@yrtechnosoft.com Web: www.yrtechnosoft.com Product: Weld Design Description: Software for calculating welding beads according to permissible stresses and the Blodgett method. 14 different forms of cord and the flows are calculated in 3 locations. The cdn price includes updates for one year. English, French, 32 and 64 bit version as well as student version available.

Listings are provided as a courtesy, STRUCTURE magazine is not responsible for errors.

PRINT is available online!

www.STRUCTUREmag.org

STRUCTURE magazine

18

TRADE SHOW

IN

PRINT 2017

Restoration Team Experience Since 1978

Masonry Façade Re-Anchoring Solutions

SAVE THE WALL!

Don’t Tear it Down or Cover it with Insulation and Stucco

Fortify and re-anchor existing stone and masonry veneers to resist live loads and seismic applications with proven retrofit anchors.

CTP Stitch-Tie CTP Stone-Grip

Helical Wall Tie System for Stabilizing Veneers and Crack Repair

Dimensional Stone-Panel Cladding Re-Anchoring Systems

ANOTHER

CTP

ORIGINAL!

NEW! CTP GRIP-MAX* * Patent Pending

CTP Façade-Tie Bracket Re-Connecting Exterior Veneers from the Interior

CTP MAD-2000 Effective Solution for Bridging Expansion Joints

shown with CTP Stitch-Tie

shown with CTP Grip-Tie

CTP Grip-Tie

Mechanical Repair Anchors for Stabilizing Veneers

CTP-16

for Brick Additions or Replacement; and for Brick Veneer Stud Cavity Wall Construction.

Veneer Anchoring System that Keeps the Air Barrier Intact and the Veneer in Place.

Shown Here With:

CTP Wall Tie

a Multifunctional Triangle Wall Tie That Can be Used in Standard or Seismic Veneer Anchoring Applications

Contact our Technical Services Team with your repair application needs for a cost effective and performance targeted veneer stabilizing solution.

CTP is an American company incorporated in the State of Indiana with multiple sale representatives and suppliers located across the United States.

CTP is committed to supplying the highest quality masonry tie and construction systems that satisfy all stringent national codes and standards for today’s building structures.

10422 W 400 N Michigan City, Indiana 46360-9470 • USA Phone: (219) 878-1427 Contact: Steve Getz, BSCE www.CTPanchors.com Engineered Anchoring Solutions Provider

Proudly Made

In the USA!

FOUNDATIONS

Specialty Contractors Suppliers

Dlubal Software, Inc.

SCIA, a Nemetschek Company

Trimble

ENERCALC, Inc.

StructurePoint

United States Gypsum

Phone: 267-702-2815 Email: info-us@dlubal.com Web: www.dlubal.com Product: RFEM Description: Accurately represent soil-structure interaction with the add-on module RF-SOILIN. Includes an extendable library of soil properties and consideration to groundwater level, excavation effects, and bedrock. Elastic foundation coefficients, stresses, and settlements are determined utilizing a non-linear iterative method. Additional slab foundation design according to ACI 318-14 using RF-CONCRETE Surfaces.

Phone: 800-424-2252 ENERCALC Email: info@enercalc.com Web: https://enercalc.com Product: Structural Engineering Library Description: ENERCALC’s SEL has you covered when it comes to design of individual pad footings, continuous wall footings, or combined footings. The foundation design modules feature flexible geometry definition, thorough load combinations, and clear concise output.

Instant recalculation allows “what-if” solutions. Check out ENERCALC’s footing design capabilities today!

Phone: 443-393-3616 Email: b.follett@scia.net Web: www.scia.net/en Product: SCIA Engineer Description: Links structural modeling, analysis, design, reporting and interoperability in ONE program. Design beams, columns, slabs and shear walls according to ACI 318 including required seismic provisions. Learn how you can start boosting your productivity with SCIA Engineer today!

Phone: 847-966-4357 Email: info@structurepoint.org Web: www.structurepoint.org Product: spMats Description: Widely used for analysis, design and investigation of concrete mat foundations, footings, and slabs on grade. spMats is equipped with the American (ACI 318-14) and Canadian (CSA A23.314) concrete codes. spMats is utilized by engineers worldwide to optimize complicated foundation design, and improve analysis of soil structure interaction.

MASONRY Construction Tie Products, Inc. (CTP)

Phone: 219-878-1427 Email: steve@ctpanchors.com Web: www.CTPanchors.com Product: CTP Grip-Tie; CTP STitch-Tie; CTP Stone-Grip Tie; CTP Facade-Tie Brackets Description: Restoration anchors for masonry reanchoring applications for brick, stone, cast stone, stucco, terra cotta, precast panel veneers to masonry, concrete, hollow CMU, grouted CMU, tile, steel, metal stud, wood stud, tile, and brick back ups.

ENERCALC, Inc.

Phone: 800-424-2252 ENERCALC Email: info@enercalc.com Web: https://enercalc.com Product: Structural Engineering Library Description: Whether it’s masonry slender walls, masonry beams and lintels, or masonry cantilevered retaining wall stems, ENERCALC’s SEL has the solution. The masonry design modules feature flexible geometry definition, thorough load combinations, and clear concise output. Instant recalculation allows “what-if ” solutions. Check out ENERCALC’s masonry design capabilities today!

Phone: 770-426-5105 Email: kristine.plemmons@trimble.com Web: www.tekla.com Product: Tekla Structures Description: Move from design-oriented to construction-oriented engineering and enable structural engineers improved additional services.

Through our open and collaborative software environment, you can work with other disciplines and reduce RFIs. From concept to completion, Tekla software gives you collaboration and control.

Phone: 312-436-4260 Email: JMEstrada@usg.com Web: www.usgfoundationwall.com Product: USG Structual Panel Concrete Foundation Wall Description: A panel designed to be fastened to load-bearing cold-formed steel studs to create a nonrotting, noncombustible high-strength foundation wall. It is ideal for use in residential construction, for applications such as full-height basements, storm shelters, crawl spaces and cellars.

Moisture Management Suppliers

Larsen Products Corp.

Phone: 800-633-6668 Email: claire@larsenproducts.com Web: www.larsenproducts.com Product: Plaster-Weld® Description: A high quality-bonding agent that bonds new plaster to any clean, structurally sound, interior surface. Patented formulation incorporating polyvinyl acetate homopolymer. Prepares the surface to allow plastering directly to concrete over electric radiant heat cable and to bond cement mortar beds to smooth concrete for installation of rigid foam insulation.

United States Gypsum

Phone: 312-436-4260 Email: JMEstrada@usg.com Web: www.usg.com/structuralpanels Product: USG Structural Panels Description: High-strength, reinforced concrete panels for use in noncombustible construction.

Lighter than precast or poured concrete, USG Structural Panels install like wood sheathing and are mold-, moisture- and termite-resistant, providing a faster, easier and more efficient way to build.

Simpson Strong Tie®

Phone: 800-925-5099 Email: web@strongtie.com Web: www.strongtie.com Product: Composite Strengthing Systems Description: A wide range of fiber-reinforced polymer (FRP) products for concrete and masonry, including code-listed fabrics providing some of the highest design values on the market, and North America’s only code-listed precured laminate. Contact us to help you design a customized solution for your next structural reinforcement project.

STRUCTURE magazine

21

TRADE SHOW

IN

Not listed?

All 2017/2018 Resource Guide forms, including the 2018 TRADE SHOW IN PRINT, are now available on our website. www.STRUCTUREmag.org.

PRINT 2017

WHO DO YOU

TRUST TO ANCHOR

YOUR CITY Experience and innovation are our foundations for quality.

Introducing the CHANCE® Drivecast™ screw displacement pile, a fully grouted pile capable of resisting corrosion in aggressive soils and high water tables with the added advantage of installing in limited access areas. As a proven large diameter solution, this pile provides a solution to your high axial and lateral capacity requirements for a wide variety of applications.

New Construction | Highway | Sewer | Pipelines | Commercial | Industrial

AD_04_164_E

ENDURING PRODUCTS & PEOPLE

YOU CAN DEPEND ON hubbellpowersystems.com/abchance

Photo courtesy of districtdetroit.com.

Detroit Events Center Detroit, Michigan

DESIGNED not to be seen

Williams Type B System Extruded Free Stress Length Typical Strand Anchor – PTI Class II

Tieback & Tiedown Anchor

Systems

Williams 150 KSI All Thread Bar Anchor System

For Support Of Excavation

Construction photo and system illustrations courtesy of Williams Form Engineering Corp.

Williams Systems Include: • The most technologically advanced extrusion equipment for the manufacture of permanent and temporary strand anchors.

• Strand anchors arrive to the jobsite fully fabricated and coiled to allow for installation in areas where there are clearance issues or bench width constraints.

• Strand Anchors are typically produced from 0.6" diameter, 7 wire strand [fpu = 270 ksi, 1862 N/mm2] meeting ASTM A416.

• Our strand and threaded bar anchors have been successfully used as prestressed ground anchors for a wide variety of Civil Engineering applications.

Williams Form Engineering Corp. has been a leader in manufacturing quality products and customer service, for the Construction and Fastener Industries for over 80 years.

Belmont, MI 616.866.0815

Portland, OR 503.285.4548

San Diego, CA 858.320.0330

Collegeville, PA 610.489.0624

Golden, CO 303.216.9300

Kent, WA 253.854.2268

Lithia Springs, GA 770.949.8300

London, ON 515.659.9444

For More Information Visit:

williamsform.com

StructurePoint’s Productivity Suite of powerful software tools for reinforced concrete analysis and design

Analysis design & investigation of reinforced concrete beams & one-way slab systems Analysis design & investigation of reinforced concrete beams & slab systems Finite element analysis & design of reinforced, precast ICF & tilt-up concrete walls

Design & investication of rectangular, round & irregularly shaped concrete column sections

Finite element analysis & design of reinforced concrete foundations, combined footings or slabs on grade

StructurePoint’s suite of productivity tools are so easy to learn and simple to use that you’ll be able to start saving time and money almost immediately. And when you use StructurePoint software, you’re also taking advantage of the Portland Cement Association’s more than 100 years of experience, expertise, and technical support in concrete design and construction.

Visit StructurePoint.org to download your trial copy of our software products.

For more information on licensing and pricing options please call 847.966.4357 or e-mail info@StructurePoint.org.

Work quickly. Work simply. Work accurately.

LEARN analysis and design of concrete floor systems Visit: www.StructurePoint.org > Publications > Design Examples

Two-Way Flat Plate Concrete Floor System Analysis and Design The two design procedures shown in ACI 318-14: Direct Design Method (DDM) and the Equivalent Frame Method (EFM) are illustrated in detail to analyze and design two-way flat plate system. The hand solution from EFM is also used for a detailed comparison with the analysis and design results of the engineering software program spSlab including detailed deflection calculations.

Two-Way Concrete Floor Slab with Beams Design and Detailing The Equivalent Frame Method (EFM) presented in ACI 318-14 is illustrated in detail in this example to analyze and design two-way floor slab with beams.

The EFM solution is also used for a detailed comparison with the analysis and design results of the engineering software program spSlab. This example highlights the slab interaction with the longitudinal and transverse beams and their effect on the system flexural and torsional stiffness including detailed deflection calculations.

Two-Way Flat Slab (Drop Panels) System Analysis and Design The Equivalent Frame Method (EFM) presented in ACI 318-14 is illustrated in detail in this example to analyze and design two-way flat slab with drop panels system. The EFM solution is also used for a detailed comparison with the analysis and design results of the engineering software program spSlab. This example highlights code based selection of drop panel dimensions, analysis process of non-prismatic slab with drop panels, the crucial role of drop panels in resisting two-way shear at columns, and detailed deflection calculations.

Two-Way Joist Floor (Waffle Slab) System Analysis and Design The Equivalent Frame Method (EFM) presented in ACI 318-14 is illustrated to analyze and design two-way waffle slab system. The EFM solution is also used for a detailed comparison with the analysis and design results of the engineering software program spSlab. This example highlights code based selection of rib and drop head dimensions, analysis process of non-prismatic slab due to the presence of longitudinal and transverse ribs and drop heads, two-way shear check for waffle slabs, and detailed deflection calculations.

A complete concrete design resource

REDUCE THERMAL TRANSFER With the TBS Thermal Brick Support from HOHMANN & BARNARD! » A groundbreaking brick veneer support system that

reduces thermal bridging in relief angles, to improve the energy efficiency of your building!

» Saves man-hours and provides additional energy savings by allowing for the installation of continuous insulation behind the support angle.

» The system design permits a wide range of

adjustments in multiple directions to accommodate construction tolerances.

» Each job is designed and engineered in house to meet your specific project needs!

» Available in Hot-Dip Galvanized or Stainless Steel (Type 304 & 316) finishes.

»

MANUFACTURED IN THE USA!

H O H M A N N & B A R N A R D, I N C. ENGINEERED Solutions for Masonr y since

1933

www.h-b.com // 800.645.0616

ANCHORS American Wood Council

Phone: 202-463-2766 Email: info@awc.org Web: www.awc.org Product: National Design Specification® and Special Design Provisions for Wind and Seismic Description: AWC’s National Design Specification(NDS®) for Wood Construction contains design provisions and tabulated anchor bolt design values for wood-to-concrete connections. AWC’s Special Design Provisions for Wind and Seismic contains design provisions for lateral, shear, uplift, and hold-down connectors used to attach wood frame shear walls to concrete.

ASDIP Structural Software

Phone: 407-284-9202 Email: support@asdipsoft.com Web: www.asdipsoft.com Product: ASDIP STEEL 4 Description: Design column steel base plates under any combination of vertical load and bending moment, including uplift (per AISC Design Series #1). Design anchor rods in tension and shear (per ACI 318-14 Chapter 17), shear lugs (per ACI 349), and required anchor reinforcement. Eccentric columns and Seismic Provisions included.

Bentley Systems, Incorporated

Phone: 800-BENTLEY Email: Samantha.Langdeau@bentley.com Web: www.bentley.com Product: RAM Elements Description: Analysis and design, including quickly performing 3D finite element analysis, of almost any type of structure or structural component. Save time and money by performing daily design tasks for all building projects, simple or complex, all within a single easy to learn and use application.

Product: RAM Connection Description: Perform analysis and design of virtually any connection type, verify connections in seconds, all with comprehensive calculations, including seismic compliance. Increase productivity with RAM Connection to optimize workflows and full integration of 3D design models.

Cintec Reinforcement Systems Ltd

Phone: 613-225-3381 Email: solutions@cintec.com Web: www.cintec.com Product: Cintec™ Reinforcement & Anchoring Systems Description: Cintec International is a globally recognized leader in engineering of structural masonry reinforcement and anchoring systems. Our innovative anchors provide a seamless solution for historic restorations, all masonry structures, and other important buildings worldwide.

Construction Tie Products

Phone: 219-878-1427 Email: steve@ctpanchors.com Web: www.CTPanchors.com Product: CTP Grip-Tie; CTP STitch-Tie; CTP Stone-Grip Tie; CTP Facade-Tie Brackets Description: Restoration anchors for masonry reanchoring applications for brick, stone, cast stone, stucco, terra cotta, precast panel veneers to masonry, concrete, hollow CMU, grouted CMU, tile, steel, metal stud, wood stud, tile, and brick back ups.

Anchors

Geopier Foundation Company

5

DEWALT

Phone: 845-230-7533 Email: mark.ziegler@sbdinc.com Web: http://anchors.dewalt.com Product: The Mini-Undercut+ Anchor Description: An internally threaded, self-undercutting anchor designed for cracked and uncracked concrete, including seismic loading. Suitable base materials include post-tension concrete (PT slabs), hollow-core precast concrete and normal-weight concrete. The Mini-Undercut+ anchor provides consistent behavior at shallow embedments at 3⁄4-inch. ICC-ES ESR 3912 and FM approved.

Dlubal Software, Inc.

Phone: 267-702-2815 Email: info-us@dlubal.com Web: www.dlubal.com Product: RFEM Description: Stress analysis of complex connection layouts utilizing surface and solid elements, automatic finite-element meshing, mesh refinements, and surface intersection capabilities. Perform required strength and serviceability limit state designs of RC (per to ACI-318 and other international standards). Represent soil-structure interaction with multiple soil layers for calculated foundation stresses and settlements.

ENERCALC, Inc.

Phone: 800-424-2252 ENERCALC Email: info@enercalc.com Web: http://enercalc.com Product: Structural Engineering Library Description: Design of anchors and anchor bolts typically requires thorough development of applied loads, and may require analysis of full structures or connected components. Structural Engineering Library assists in determining those loads and performing those analyses through Loads & Forces modules and many analysis and design modules.

Not listed?

All 2017/2018 Resource Guide forms, including the 2018 TRADE SHOW IN PRINT, are now available on our website. www.STRUCTUREmag.org.

STRUCTURE magazine

27

TRADE SHOW

IN

Anchor Bolts | Concrete Anchors | Façade Anchors General Hardware & Ties | Geotechnical Anchors Masonry Anchors | Post-Tensioning | Reinforcing Anchors | Utility Anchors

Phone: 800-371-7470 Email: info@geopier.com Web: www.geopier.com Product: Rammed Aggregate Pier® and Rigid Inclusion Systems Description: Specializing in Rammed Aggregate Pier®, Rigid Inclusions, and slope reinforcement systems, Geopier provides alternatives for massive over-excavation and replacement of deep foundations, including driven piles, drilled shafts or augered cast-inplace piles. Thousands of structures around the world are currently supported by Geopier technologies. Start saving time and money with Geopier.

HALFEN USA

Phone: 800-423-8140 Email: info@halfenusa.com Web: www.halfenusa.com Product: HZA Anchor Channels Description: Ideal for seismic conditions as they provide load resistance in tension as well as transverse and longitudinal shear. HZA Anchor Channels are an ideal cast-in solution to replace post installed anchors and weld plates. Available in stainless steel and hot dip galvanized.

Product: HTA Anchor Channels Description: An ideal cast-in solution to replace post installed anchors and weld plates. HTA Anchor Channels are ICC Approved and provide a high level of adjustability to accommodate large concrete tolerances.

Load resistance provided in tension and shear. Available in stainless steel and hot dip galvanized.

Hardy Frames

Phone: 800-754-3030 Email: dlopp@mii.com Web: www.hardyframe.com Product: Hardy Frame Anchoring Solutions Description: Hardy Frame pre-engineered anchorage details for Unreinforced, Reinforced and Back-to-Back Reinforced Anchorage Solutions are available to download. Embed details are also available for Z4 continuous tie-down systems.

Details are organized to be used as supplemental sheets for plan submittals.

Heckmann Building Products, Inc.

Phone: 708-865-2403 Email: info@heckmannanchors.com Web: www.heckmannanchors.com Product: Pos-I-Tie® Veneer Anchoring System Description: The original single barrel masonry anchor. Designed to penetrate continuous insulation and fasten securely to steel studs. Factory assembled EPDM washer completely seals penetrating hole from air and moisture. Available ThermalClip® accessory reduces thermal transfer. Passes NFPA 285, ASTM E2357 and ASTM E331 as part of the CavityComplete® Wall System. continued on page 29

PRINT 2017

QUALITY RUNS DEEP The oldest, most trusted & most experienced earth anchoring company in the world.

ENDURING PRODUCTS & PEOPLE

YOU CAN DEPEND ON hubbellpowersystems.com/abchance

AD_04_117_E

ANCHORS Hohmann & Barnard, Inc.

Phone: 631-234-0600 Email: weanchor@h-b.com Web: www.h-b.com Product: TBS Thermal Brick Support Description: A groundbreaking brick veneer support system that reduces thermal bridging in relief angles, as well as allows for continuous insulation behind the shelf angle to improve the energy efficiency of your building! This system is designed and engineered in-house to permit a wide-range of adjustments to accommodate job site and project specific requirements.

A MiTek - BERKSHIRE HATHAWAY COMPANY

Hubbell Power Systems, Inc.

Phone: 855-477-2121 Email: civilconstruction@hubbell.com Web: www.hubbellpowersystems.com/abchance Product: CHANCE Helical Tieback Anchors Description: Backed by over 100 years of engineering experience, CHANCE Helical Anchor Systems offer a technically advanced and extremely cost effective alternative to concrete and other deep foundation systems. CHANCE Helical Piles comply with the 2015, 2012, and 2009 International Building Code (IBC), are ICC-ES Approved and ISO:9001 Certified.

IES, Inc.

Phone: 800-707-0816 Email: info@iesweb.com Web: www.iesweb.com Product: VAConnect Description: Steel base plates and shear tabs too are what we will design for you. Those anchor ‘calcs’ (Appendix D) are also dealt with easily.

Kelken Construction Systems

Phone: 732-416-6730 Email: ken@kelken.com Web: www.kelken.com Product: KELIGROUT Structural Adhesive Description: KELIGROUT is a superior high strength polyester resin anchoring material with guaranteed pullout values exceeding ACI-349-85.

RedBuilt

Phone: 888-859-6757 Email: pdrace@redbuilt.com Web: www.redbuilt.com Product: Open Web Truss Bearing Clips Description: These trusses have tested lateral load capacities to frame seismic details without the use of strap ties. Clips may be welded or nailed to bearings in most project applications where straps are specified, for CMU walls, or wider on-center spacings of 32 inches or more.

RISA Technologies

Phone: 949-951-5815 Email: info@risa.com Web: risa.com Product: RISAConnection Description: Get baseplate and anchor design for RISA-3D and RISAFloor models using RISAConnection. Column base reactions, including biaxial moments, are sent for each load combination to RISAConnection. More accurate than traditional methods of designing for envelope reactions. With RISA-3D and RISAFloor integration RISAConnection is the new standard for baseplate design.

Anchors

5

S-FRAME Software

Phone: 604-273-7737 Email: info@sframe.com Web: s-frame.com Product: S-FOUNDATION 2017 Description: A complete foundation management solution. Use as standalone application or integrated within S-FRAME Analysis. Easily import support data from any 3rd party analysis program. Automatically generates and manages the underlying model as you optimize your design. Includes advanced customization and integration features.

Simpson Strong-Tie®

Phone: 800-925-5099 Email: web@strongtie.com Web: www.strongtie.com Product: Strong-Bolt® 2 Wedge Anchor: Type 304 SS Description: Designed for use in cracked and uncracked concrete, as well as uncracked masonry applications. It is now available in Type 304 stainless steel for all standard sizes. The additional product offerings make it easier for you to choose the best material solution for your job.

Product: Stainless-Steel Titen HD® Heavy-Duty Screw Anchor Description: The new stainless-steel Titen HD screw anchor can now be installed in exterior and corrosive environments. Its innovative design effectively cuts the concrete while significantly reducing carbon steel in the anchor to maximize corrosion resistance.

Standards Design Group, Inc

Phone: 806-792-5086 Email: info@standardsdesign.com Web: www.standardsdesign.com Product: Wind Loads on Structures 4 Description: Performs computations in ASCE 7-10, Chapters 26-31 also ASCE 7-98, 02, 05, Section 6 and computes wind loads by analytical method rather than the simplified method, provides basic wind speeds from a built-in version of the wind speed, allows the user to enter wind speed. Numerous specialty calculators.

STRUCTURE magazine

29

TRADE SHOW

IN

Anchor Bolts | Concrete Anchors | Façade Anchors General Hardware & Ties | Geotechnical Anchors Masonry Anchors | Post-Tensioning | Reinforcing Anchors | Utility Anchors Trimble

Phone: 770-426-5105 Email: kristine.plemmons@trimble.com Web: www.tekla.com Product: Tedds Description: Automating your everyday structural designs, Tedds’ broad library includes anchor bolt design per ACI 318 Appendix D. The calculation includes comprehensive checks for tensile and shear failure of anchors and is available as part of a free trial of the website.

Product: Tekla Structural Designer Description: Revolutionary software that gives engineers the power to analyze and design steel and concrete buildings efficiently and profitably. Physical, information-rich models contain all the intelligence needed to fully automate the design and document your project, including all end force reactions communicated with two-way BIM integration, comprehensive reports and drawings.

Product: Tekla Structures Description: Tekla is an Open BIM modeling software that can model all types of anchors required to create a 100% constructible 3D model. Anchors can either be created inside the software or imported directly from vendors that have 3D CAD files of their products.

Wej-it

Phone: 230-857-2200 Email: david@toggler.com Web: www.wejit.com Product: High-Performance Anchors Description: Wej-it has several new products for 2017: Hang-TITE Rod Hanger Anchors; Pound-It Drive Anchors; POWER-Skru Large Diameter Concrete Screws; and Screw-In Drive Screw Anchors.

The TRADE SHOW IN PRINT is available online! www.STRUCTUREmag.org

PRINT 2017

BRIDGES Automation Continuum Inc.

Phone: 224-209-3500 Email: info@viewaci.com Web: www.pf80.info Product: PF80 Crack Monior Description: A battery operated crack monitoring device that helps to prolong the useful life of bridges, buildings and structures, and minimizes costly disruptions by providing monitored structural data.

Wireless or USB data communication versions.

CADRE Analytic

Phone: 425-392-4309 Email: j4@cadreanalytic.com Web: www.cadreanalytic.com Product: CADRE Pro 6.8 Description: Analysis application for modeling and assessing bridges, towers, tanks, and other structures. Load conditions include discrete, pressure, hydrostatic, seismic, and dynamic response. Features for displaying, plotting, and tabulating extreme load, stresses, and displacement across the structure and across multiple load cases simultaneously. Basic code checking for steel, wood, and aluminum.

Dlubal Software, Inc.

Phone: 267-702-2815 Email: info-us@dlubal.com Web: www.dlubal.com Product: RFEM Description: Capable of linear, non-linear, static and dynamic analysis, RFEM is complete with moving load generation, cable form-finding, parametric modeling, and multi-material design considerations. The powerful yet user friendly FEA software is seamless in the design and analysis of pedestrian and highway cable-stayed, suspension, arch, and beam bridge structures.

New Millennium Building Systems

Phone: 260-969-3582 Email: rich.madden@newmill.com Web: www.newmill.com Product: Bridge Deck Systems Description: New Millennium engineers and manufactures a full range of structural steel building systems, including stay-in-place steel and concrete form systems for bridges. Featuring Rhino-Dek® galvanized and polymer laminated steel decking for spanning over brackish and salt water, suitable for new construction and bridge rehabilitation.

Pile Dynamics Inc

Phone: 216-831-6131 Email: dfischer@pile.com Web: www.pile.com/TIP Product: Thermal Integrity Profiler (TIP) Description: TIP evaluates the entire cross-section and length of a drilled deep foundation, using heat generated by cement curing, to assess concrete quality inside and outside of the reinforcing cage, accelerating construction timelines and revealing necking or bulges, variations in shape of shaft, and cage alignment.

RISA Technologies

Phone: 949-951-5815 Email: info@risa.com Web: risa.com Product: RISA-3D Description: With RISA-3D’s versatile modeling environment and intuitive graphic interface, model any structure from bridges to buildings in minutes. Get the most out of your model with advanced features such as moving loads, dynamic analysis, and over 40 design codes.

Structural design has never been so thorough or easy!

S-FRAME Software

DYWIDAG - Systems International USA Inc.

Phone: 630-739-1100 Email: dsiamerica@dsiamerica.com Web: www.dsiamerica.com Product: DYNA Grip Stay Cable Systems, Link Anchor Box System, Force Elasto-Magnetic Sensor System Description: DYWIDAG-Systems International USA Inc. is a globally leading system supplier of innovative technologies for Construction. Across the continents, the DSI Group designs, develops, produces and supplies high quality products and systems such as DYWIDAG Post-Tensioning Systems, Stay Cable Systems, Geotechnical Systems and “Concrete Accessories”.

MDX Software

Coatings | Engineering & Construction Firms Suppliers | Software Vendors/Developers

Phone: 573-446-3221 Email: support@mdxsoftware.com Web: www.mdxsoftware.com Product: MDX Software Description: MDX Software Curved & Straight Steel Bridge Design & Rating is in use by many top design firms and DOTs to design and rate steel girder bridges for compliance with LRFD, LRFR, LFD, and ASD AASHTO Specifications.

Phone: 604-273-7737 Email: info@s-frame.com Web: s-frame.com Product: S-FRAME Analysis Description: Model, analyze and design structures regardless of geometric complexity, material type, loading conditions, nonlinear effects, or design codes.

S-FRAME efficiently integrates concrete, foundation, and steel design as well as BIM and DXF data sharing links within a single work environment to ensure maximum productivity.

Simpson Strong-Tie®

Phone: 800-925-5099 Email: web@strongtie.com Web: www.strongtie.com Product: FX-70® Structural Pile Repair and Protection System Description: Many bridges are constructed with steel pipe and H-piles that deteriorate over time. The FX70 system makes in-place repairs of piles possible and practical. By eliminating the need to dewater repair sites or take structures out of service, FX-70 drastically reduces the overall cost of restoring deteriorating or damaged structures.

STRUCTURE magazine

30

TRADE SHOW

IN

Strand7 Pty Ltd

Phone: 252-504-2282 Email: info@strand7.com Web: www.strand7.com Product: Strand7 Description: An advanced, general purpose, FEA system used worldwide by engineers, designers, and analysts for a wide range of structural analysis applications. It comprises preprocessing, solvers (linear and nonlinear static and dynamic capabilities) and postprocessing. Features include staged construction, a Moving Load module and quasi-static solver for shrinkage and creep/relaxation problems.

Stronghold Coatings

Phone: 937-746-7632 Email: strongholdone@cs.com Web: www.StrongholdOne.com Product: Dichtol Description: A polymeric capillary sealer that impregnates micropores and hairline cracks forming a protective barrier against gasses and liquids. It penetrates deeply into the coating to prevent corrosion of the metal substrate. Easily applied and cures at ambient temperature.

StructurePoint

Phone: 847-966-4357 Email: info@structurepoint.org Web: www.structurepoint.org Product: spColumn Description: Visit our Technical Article webpage to see “Bridge Pier Design Capacity Evolution” where two interaction diagrams using spColumn software are superimposed. This compares and contrasts capacity before and after the introduction of major code changes at the beginning of the century, and helps bridge designers making influential decisions.

Trimble

Phone: 770-426-5105 Email: kristine.plemmons@trimble.com Web: www.tekla.com Product: Tekla Structures Description: Increase productivity through higher automation of fabrication and 4D project management. Extensive range of steel profiles including elliptical and tubular, and individual connection details with welds and bolts. Drawings and reports can be automatically generated from the constructible 3D model.

Wheeler Bridge

Phone: 952-929-7854 Email: jhoak@wheeler1892.com Web: www.wheeler1892.com Product: Prefabricated Bridges + Bridge Kits Description: Utilizing steel and timber construction, Wheeler manufactures vehicle and recreation bridges of enduring beauty and durability. Knowledgeable project advice, quality products and attention to customer service.

PRINT 2017

STEEL BUILDING SYSTEMS PROVIDE HEALTHY CHOICES

WHITE PLAINS HOSPITAL | WHITE PLAINS, NEW YORK | PHOTO CREDIT W&W GLASS

Choosing the right system is your Rx for success We are your nationwide resource for the broadest range of custom-engineered structural steel building systems. Bring us in early on your project to evaluate and determine the best solution for your application, and to reduce total-project costs.

ROOFING & FLOORING SYSTEMS | CEILING & CLADDING SYSTEMS | LONG-SPAN COMPOSITE SYSTEMS | STEEL & CONCRETE BRIDGE SYSTEMS | BIM 3D DESIGN

READ THE STORY: www.newmill.com/hospital

A new standard for exposed structure CAST CONNEX Universal Pin Connectors in the Whitney Museum of American Art by Renzo Piano Building Workshop

www.castconnex.com

innovative components for inspired designs

STEEL/COLD-FORMED STEEL Coatings | Software | Suppliers

Applied Science International, LLC

ClarkDietrich

Product: SteelSmart System 8.0 Description: Provides construction professionals with an essential tool engineered for both fast and accurate design. Available design modules include: Curtain Wall, Load Bearing Wall, X-Brace Shear Wall, Floor Framing, Roof Framing, Roof Truss, and MomentResisting Short Wall.

Product: Drift Fastclip™ Slide Clip Description: Accommodates both vertical deflection and lateral drift. The clip is used to attach curtainwall studs to the building structure while allowing for 2 inches of vertical and lateral movement. It’s FastClip Deflection Screws ensure friction-free sliding, while the step bushings allow for 2-inch lateral deflection.

Phone: 919-645-4090 Email: support@appliedscienceint.com Web: www.extremeloading.com Product: Extreme Loading for Structures (ELS) Description: Offers a new advanced level of nonlinear dynamic structural analysis which allows users efficiently to study structural failure from any number of actual or possible extreme events. ELS can be used to model cold formed steel structures for progressive collapse, blast, and seismic analysis.

Atlas Tube

Phone: 312-275-1608 Email: jim.erhart@zekelman.com Web: www.atlastube.com Product: HSS Description: Atlas Tube produces a wide range of steel tubular products to the A1085 and A500 specifications.

As the leading provider of hollow structural sections (HSS) in North America, we offer HSS Design Tools, straight-seam electric resistance weld (ERW) pipe piling and Epox Z Kote® powder primed tubing.

CAST CONNEX

Phone: 416-806-3521 Email: info@castconnex.com Web: www.castconnex.com Product: Innovative Connection Solutions Description: The leading supplier of cast steel components for use in the design and construction of building and bridge structures. Universal Pin Connectors™ and Architectural Tapers™ bring off-theshelf simplicity and reliability to AESS, while custom designed components enable unparalleled opportunity for creativity in design.

Dlubal Software, Inc.

Phone: 267-702-2815 Email: info-us@dlubal.com Web: www.dlubal.com Product: RFEM Description: Non-linear FEA software complete with LRFD and ASD design of hot-rolled steel according to AISC, CSA, and other international standards. Includes serviceability deflection checks, tapered and curved beam design, and automatic cross-section optimization. Stress analysis and design of steel surface and shell elements also available including optimization and serviceability checks.

Phone: 513-870-1100 Email: info@clarkdietrich.com Web: www.clarkdietrich.com Product: RedHeader PRO™ Rough Opening System Description: Replaces traditional built-up or “boxed” headers with single members that allow for quick framing around non-load bearing windows and doors.

Members are pre-cut to specified lengths and designed to provide better results in half the time, all while eliminating “capped” members.

Product: Heavy-Duty Stud (HDS®) Framing System Description: A high-performance, heavy-duty framing stud for headers and jambs. Its superior strength and carrying capacity effectively eliminates box beam headers, nesting track and stud for posts and jambs. Complemented by the HDSC header bracket; a pre-punched clip that reduces installation time by up to 50%.

Ecospan Composite Floor System

Phone: 888-375-9787 Email: jason.thornton@nucor.com Web: www.ecospan-usa.com Product: Ecospan Composite Floor System Description: Provides open web structural components with a lighter weight composite design for elevated floor construction. It uses a unique configuration of components with high strength-to-weight ratios that allow for longer spans, shallower floor depths, greater rigidity and enhanced performance – without sacrificing aesthetics.

ENERCALC, Inc.

Phone: 800-424-2252 ENERCALC Email: info@enercalc.com Web: https://enercalc.com Product: Structural Engineering Library Description: Steel design is a breeze with SEL. Beams, columns, 2D frames, force distribution in bolt groups – SEL handles it all. The clear user interface makes it easy and straightforward to set up calculations. Instant recalculation enables “what-if ” solutions. Member optimization will improve your efficiency and save you time!

The TRADE SHOW

IN

PRINT

is available online!

www.STRUCTUREmag.org

GIZA Steel

Phone: 314-656-4615 Email: jmoody@gizasteel.com Web: www.gizasteel.com Product: GIZA Description: Leading connection design software for steel framed structures. Compliant with AISC 13th and 14th editions using either ASD or LRFD methods.

With extensive experience in the New York City market, GIZA also works with NYC building code.

Save up to 80% of design time using GIZA.

HALFEN USA Inc.

Phone: 800-423-9140 Email: info@halfenusa.com Web: www.halfenusa.com Product: HM/HZM Mounting Channels Description: HALFEN HM/HZM Anchor Channels are utilized for steel to steel connections requiring a high level of adjustability or modularity. HALFEN’s hot rolled HM Mounting Channels provide load capacity in tension and transverse shear, while the HZM Toothed Channels provide longitudinal load capacity as well. Suitable for dynamic and cyclical loading.

Product: STS Steel Balcony Thermal Breaks Description: HALFEN steel to steel (STS) balcony connections are an ideal solution to minimize thermal bridging in steel balconies. HALFEN STS connections are offered in variable bracket projections and heights.

While reducing heat loss by 50% compared to traditional connections, bending moment and shear capacity are not compromised.

Heckmann Building Products, Inc.

Phone: 708-865-2403 Email: david@heckmannanchors.com Web: www.heckmannanchors.com Product: Pos-I-Tie® Veneer Anchoring System Description: The original single barrel masonry anchor. Designed to penetrate continuous insulation and fasten securely to steel studs. Factory assembled EPDM washer completely seals penetrating hole from air and moisture. Available ThermalClip® accessory reduces thermal transfer. Passes NFPA 285, ASTM E2357 and ASTM E331 as part of the CavityComplete® Wall System.

IES, Inc.

Phone: 800-707-0816 Email: info@iesweb.com Web: www.iesweb.com Product: VisualAnalysis w/Design Description: Offers engineers a pleasant and efficient environment for modeling and designing steel structures. Whether you need to check an existing single column or create a complex industrial frame, VisualAnalysis lets you focus on engineering: model, load, analyze, design, report – succeed! IES offers free email support and training videos. continued on page 35

STRUCTURE magazine

33

TRADE SHOW

IN

PRINT 2017

Apartments

Office Buildings

OUR VERSATILITY IS IDEAL FOR ALL BUILDING TYPES. Ecospan’s Composite Floor System is an integration of steel components with open web design for low, mid, and high-rise structures. Using a unique configuration of components with high strength-to-weight ratios, our innovative system allows for longer spans, shallow floor depths, greater rigidity and enhanced performance – without sacrificing aesthetics.

With steel joists and steel decking produced from recycled steel, Ecospan provides open web structural components with a lighter weight composite design for elevated floor construction.

www.ecospan-usa.com

Hospitality

Senior Living

Student Housing THE

Ecospan Composite Floor System Nucor Vulcraft National Accounts 6230 Shiloh Road, Suite 140 Alpharetta, GA 30005 (678) 965-6667 888-375-9787

FT

CRA

B IM

VUL

ION LUT EVO

CERTIFIED

STEEL/COLD-FORMED STEEL Coatings | Software | Suppliers

Intergraph CADWorx & Analysis Solutions

MiTek

Phone: 281-477-8004 Email: alex.timofeyev@intergraph.com Web: www.coade.com Product: GT STRUDL Description: For nearly 40 years, GT STRUDL has offered structural engineers a complete design solution. 3D CAD modeling and 64-bit high-performance computation solvers are now incorporated into all versions. A high-quality and database-driven system for comprehensive frame and finite element analysis for steel or concrete structures.

Phone: 800-754-3030 Email: dlopp@mii.com Web: www.mitekbuilderproducts.com Product: Hardy Frame® Panels, Brace Frames and Special Moment Frames Description: Leads the industry in strength, stiffness and ductility to resist lateral loads, protect against damage and dissipate energy. The Panel shape permits recessed fixtures and the ability to insulate. Panel installations include back to back for double capacity, reinforced anchorage solutions are available.

New Millennium Building Systems

Lindapter

Phone: 866-566-2658 Email: inquiries@lindapterusa.com Web: www.LindapterUSA.com Product: Steel Connection Systems Description: Lindapter has a variety of connections for hollow steel section, steel-to-steel, pipe supports, and metal flooring. Hollo-Bolt is the original expansion bolt for structural steel and has recently become the only expansion bolt to have full seismic approval from ICC-ES for all seismic design categories (A-F).

Phone: 260-969-3582 Email: rich.madden@newmill.com Web: www.newmilll.com Product: Steel Joists and Decking Systems Description: New Millennium engineers and manufacturers a complete range of steel building systems, including steel joists, steel deck, special profile steel joists, architectural decking, bridge decking, and long-span composite floor systems. The company is a leader in BIM based project delivery using customized steel building systems.

PHP Systems/Design

Phone: 800-797-6585 Email: info@phpsd.com Web: www.phpsd.com Product: Rooftop Pipe & Equipment Supports Description: Replace old, dysfunctional rooftop supports with high-performance systems made from hot-dipped galvanized steel and supported by highdensity polypropylene bases. Our team will work with a licensed PE to ensure your high wind or seismic resistant design is created up-to-code per state and is suitable for your rooftop equipment.

RISA Technologies

Phone: 949-951-5815 Email: info@risa.com Web: risa.com Product: RISA-3D Description: Get the most out of your steel designs with RISAFloor and RISA-3D. The ability to use multiple materials in one FEA model make these programs your first choice for both hot-rolled and cold-formed steel. With 16 steel databases and 21 steel codes, RISA has all your bases covered.

continued on page 39 ADVERTISEMENT–For Advertiser Information, visit www.STRUCTUREmag.org

” d e r e n or c “ t e g Do nʻt b o r c o s t s . by l a F-Track is Your Solution!

Super Stud F-Track is an economical option for horizontal corners such as soffits, drop-ceilings, box-outs, and other drywall features that require a smooth, straight, corner intersection at 90 degrees.

• Allows for both horizontal and vertical framing attachment—no need for double tracks or track and angle members • Flanges have hemmed edge for added safety

SUPER STUD’S GOAL IS TO PROVIDE SOLUTIONS. CALL US TO FIND OUT HOW WE CAN HELP ON YOUR NEXT PROJECT!

800.477.7883 TECHNICAL DEPARTMENT

www.buysuperstud.com/ftrack STRUCTURE magazine

35

TRADE SHOW

IN

PRINT 2017

NUCOR TUBULAR PRODUCTS was formed in November, 2017 and is comprised of two well known, quality driven and respected tube producers in the U.S. – Independence Tube and Southland Tube.

Independence Tube started as a three person company in 1972 in a 53,000 square foot facility.

Nucor Tubular Products has evolved into four divisions with 1.7 million square feet under roof including manufacturing facilities in: Chicago, Illinois; Marseilles, Illinois; Decatur, Alabama and Trinity, Alabama.

Located 90 miles south of Decatur, Alabama resides Southland Tube. Southland Tube started operations in 1972 and grew as a valued supplier and employer in the south with 280 employees. Southland operates 5 tube mills in Birmingham, Alabama on 42 acres and 480,000 square feet under roof.

CHICAGO, IL

MARSEILLES, IL

DECATUR, AL

TRINITY, AL

BIRMINGHAM, AL

A500 NUCOR TUBULAR PRODUCTS produces steel tubing to ASTM A500, ASTM A252 and ASTM A513 in the following sizes.

SQUARES – ½" square x 16 gauge through 12" square x .625" wall RECTANGLES – 1½" x 1" x 16 gauge through 16" x 8" x .625" wall ROUNDS – 0.840" OD x .109" wall through 16" OD x .688" wall VALUE ADDED SERVICES offered are: • I.D. flash removal • HSLA grades • Weld on the short side • Special tolerances • Band saw cutting • Mitre cutting

• Charpy V-notch testing • Flux leakage

• Pickled and oiled • A252 Pipe beveling

ASTM A53 NUCOR TUBULAR PRODUCTS also manufactures ASTM A53 Type E Grade B pipe in Trinity Alabama in sizes from: Schedule 40 – 2" NPS through 8" NPS | Schedule 80 – 2" NPS through 4" NPS

ASTM A135 / ASTM A795 • Schedule 10 . . . . . . . . 2" NPS through 8" NPS • Schedule 40 . . . . . . . . 2" NPS through 8" NPS UL and C-UL listed and FM approved. All of the schedule 10 has ITC MIC Guard applied and is CPVC compatible.

ROLLING SCHEDULE – With a yearly published on–time rolling schedule second to none in the industry, you can manage your inventory more closely, knowing that material will be ready when promised. Nucor Tubular Products also offers Vendor Managed Inventory (VMI), Electronic Data Interchange (EDI) and bar coding; all of which have become very important services in the management of inventory and communications. www.independencetube.com /www.itctube.com/itcpiling.com The next time you are on–line, please take a moment to visit our new web site. There you will find our Company history and product information downloads. In addition, www.itctube.com is our 24/7 on–line customer secure Portal which will allow you to view inventory, place orders and inquiries, release loads and view and download open order reports and test reports.

NUCOR TUBULAR PRODUCTS is an active member of the American Institute of Steel Construction (AISC) and the Metals Service Center Institute (MSCI), the Farm Equipment Manufacturers Association (FEMA), the Pile Driving Contractors Association (PDCA) and the National Association of Pipe Distributors (NASPD) and its products can be purchased at steel service centers across North America.

When We Build Our Facilities, Our Engineers Specify The Finest Structural Materials.

HSS HOLLOW STRUCTURAL SECTIONS

Aesthetically Pleasing, Structurally Sound. As an Architect or Engineer, you are always looking for that “perfect” building material. At Independence Tube we feel we have achieved that balance of looks and strength in our Hollow Structural Sections (HSS) Cost Effective. Cost Competitive. But it gets better. Over 90% of the HSS products manufactured by Independence Tube meets or exceeds Grade C mechanical properties.

Get the additional strength at no additional cost.

Plentiful Inventory. Renowned Rolling Schedule. We stock the inventory for your next project, and with our frequent Rolling Schedule, on-time delivery is a given.

You now have a choice: HSS looks great, meets all your quality requirements, and the price is right.

800-543-9024 www.southlandtube.com

HSS Sizes SQUARES ½" SQ—12" SQ RECTANGLES 1½" x 1"—16" x 8" ROUNDS ½" OD—16" OD WALLS 0.065" through 0.688" LENGTH Up to 80' in length

800-376-6000 www.independencetube.com

Leveraging technology and forward thinking.

At Vulcraft, we believe it’s crucial to constantly push the boundaries of product innovation.

To give our customers the tools to get the job done better than ever before. Our pioneering efforts in product development make satisfying your needs effective and affordable.

With Vulcraft, you can expect success from start to finish. We provide peace of mind by being better partners, offering better products and ensuring better outcomes. Every time.

Learn how Vulcraft delivers better outcomes. www.vulcraft.com

The PunchLok® II System is the result of our unwavering commitment to product innovation.

It was created because we saw a need for a deck system that enabled faster installation, yeilding higher shear values, and ultimately saved our customers more money.

Better Partners. Better Products.

Better Outcomes.

STEEL/COLD-FORMED STEEL Coatings | Software | Suppliers

S-FRAME Software

Super Stud Building Products, Inc.

United States Gypsum

Simpson Strong-Tie®

The Steel Network, Inc.

Vulcraft Verco Group

Phone: 604-273-7737 Email: info@s-frame.com Web: www.s-frame.com Product: S-STEEL Description: Design and optimize steel buildings with S-STEEL, an S-FRAME integrated steel design solution. Code-check and auto design for both strength and serviceability to multiple design codes.

Supports composite beam design, staged construction, and numerous optimization criteria and constraints.

Comprehensive design reports include equations, clause references, and interactive graphics.

Phone: 800-925-5099 Email: web@strongtie.com Web: www.strongtie.com Product: CFS Designer™ Software Description: Design CFS beam-column members according to AISI specifications and analyze complex beam loading and span conditions. Intuitive design tools automate common CFS systems such as wall openings, shearwalls, floor joists, and, with the newest software update, up to eight stories of load-bearing studs.

Phone: 800-925-5099 Email: jfoote@buysuperstud.com Web: www.buysuperstud.com Product: EDGE™ EQ Steel Framing System Description: Features lightweight, high-strength steel, an innovative design incorporating a closed triangular lip, and provides the safest installation environment in the industry. Provides the highest rating, making it an ideal choice for architects looking to reduce sound transmission. Combine these features with industry leading STC ratings.

Phone: 919-845-1025 Email: support@steelnetwork.com Web: www.steelnetwork.com Product: ThermaFast - Continuous Rigid Insulation Framing System Description: An engineered installer-friendly set of steel framing tracks and angles designed to be an integral part of the continuous rigid insulation, and at the same time provide a stable component for direct substrate attachment.

Phone: 312-436-4260 Email: JMEstrada@usg.com Web: www.usg.com Product: USG Structural Panels Description: High-strength, reinforced concrete panels for use in noncombustible construction.

Lighter than precast or poured concrete, USG Structural Panels install like wood sheathing and are mold-, moisture- and termite-resistant, providing a faster, easier and more efficient way to build.

Phone: 260-337-1800 Email: dave.bjork@nucor.com Web: www.vulcraft.com Product: Steel Joists and Deck Description: Vulcraft Verco Group is the safest, highest quality, lowest cost, most productive and most profitable steel and steel products company in the world. With our local sales teams, assured steel supply, just-in-time fleet and vetted carrier service, we have the people in place to deliver.

ADVERTISEMENT–For Advertiser Information, visit www.STRUCTUREmag.org

www.buysuperstud.com/DeflectionClips or call 800.477.7883 US Patent 6213679; other patents pending

STRUCTURE magazine

39

TRADE SHOW

IN

PRINT 2017

SEISMIC Applied Science International, LLC

Phone: 919-645-4090 Email: support@appliedscienceint.com Web: www.appliedscienceint.com Product: Extreme Loading for Structures Description: A new advanced level of nonlinear dynamic structural analysis, which allows users to efficiently study structural failure from any number of actual or possible extreme events such as blast, seismic, and progressive collapse. Easily model structures composed of reinforced concrete, steel composite, and other structures with all as-built and as-damaged details.

Product: SteelSmart System - Seismic Load Generator Description: Provides construction professionals with an essential tool engineered for both fast and accurate design. Use the Load Generator & Distributor to calculate lateral wind and seismic loads per ASCE 7 and distribute the loads to the building’s individual shear walls.

CAST CONNEX

Phone: 416-806-3521 Email: info@castconnex.com Web: www.castconnex.com Product: High Strength Connectors™ Description: Simplify and improve brace member connections in seismic-resistant concentrically braced frames.

Product: Scorpion™ Yielding Connectors Description: Modular, replaceable, standardized hysteretic fuses that provide enhanced ductility and improved performance in the retrofit of seismically deficient structures or for use in the Seismic Force Resisting System of new structures.

DEWALT

Phone: 845-230-7533 Email: mark.ziegler@sbdinc.com Web: wanchors.dewalt.com Product: Screw-Bolt+ Description: A one piece, heavy duty screw anchor.

Use with standard ANSI drill bits. Finishes available in bright zinc-plated and mechanically galvanized. Suitable for normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry, and solid clay brick. Code listed for seismic and wind loads. See ICC-ES ESR-3889 (concrete), ESR-4042 (masonry).

Dlubal Software, Inc.

Phone: 267-702-2815 Email: info-us@dlubal.com Web: www.dlubal.com Product: RFEM Description: Integrated automatic wind and snow load generators per ASCE 7-16 for general buildingtype structures. Calculate a Response Spectra Analysis for all structure types according to ASCE 7 or user-defined from accelerogram input data. Design and optimization are available with the latest design standards such as AISC, ACI, ADM, NDS, etc.

Codes | Buckling Restrained Brace Engineered Products | Software

ENERCALC, Inc.

ENERCALC Phone: 800-424-2252 Email: info@enercalc.com Web: https://enercalc.com Product: Structural Engineering Library Description: Most projects require the calculation of wind and seismic loads. ENERCALC’s SEL has dedicated modules for the development of these loads using ASCE 7 and IBC methods. These modules simplify the process of developing loads and allow you to spend more time solving engineering problems and optimizing your designs.

Gripple Inc.

Phone: 630-952-2113 Email: e.balsamo@gripple.com Web: www.gripple.com Product: Seismic Products and Services Description: We provide beginning-to-end engineering services, as well as a full line of Seismic Cable Bracing and Vibration Management products for use in seismic zones or AT/FP (Anti-Terrorism/Force Protection) situations. We provide you with free budget estimating, PE stamped drawings, BIM Modeling and Clash Detection, and Coordinated Site Reviews.

RedBuilt

Phone: 866-859-6757 Email: rruim@redbuilt.com Web: www.redbuilt.com Product: Open-Web Trusses Description: Create efficient and economical floor and roof solutions for commercial and light-industrial applications. RedBuilt’s open-web trusses provides the advantages of wood and steel – their high strength-toweight ratio and long span capabilities allows for large open spaces of more than 100 feet wide.

Product: RedLam™ LVL Description: Can be used as main carrying beams, flush beams, headers and wall framing. RedLam LVL manufacturing process removes and dispenses the natural defects inherent in wood and produces a product that is strong, dimensionally stable, and reliable.

Product: Red-I™ I-joists Description: Engineered to provide strength and consistency, Red-I joists are an integral part of floor, ceiling, and roof construction for commercial applications. Comprised of laminated veneer lumber flanges and RedBuilt’s propriety oriented strand board web, Red-I joists resist warping, twisting, and shrinking that can lead to squeaky floors.

IES, Inc.

Phone: 800-707-0816 Email: terryk@iesweb.com Web: www.iesweb.com Product: VisualAnalysis Description: Helps you apply ASCE 7 wind provisions from chapter 27. Easily load surfaces through area loads, where automatic pressure values arebased on your settings.

VisualAnalysis also tackles wind on open structures, like transmission towers, where loads are a function of member cross section, elevation and ice build-up.

Meca Enterprises

Phone: 918-258-2913 Email: support@mecaenterprises.com Web: www.mecaenterprises.com Product: MecaWind Description: A cost effective program used by Engineers and designers to perform Wind calculations per ASCE 7-05 and ASCE 7-10. The program is simple to use, and offers a professional looking output with all necessary wind calculations. The user has a great deal of conrol to customize output to suit their needs.

PHP Systems/Design

Phone: 800-797-6585 Email: info@phpsd.com Web: www.phpsd.com Product: Solar Panel Support Description: Made from density/high impact polypropylene with UV-inhibitors and antioxidants.

The carbon steel finish is hot dip galvanized per ASTM A 123. This system addresses many concerns with regard to solar panel installations, such as height issues, wind issues, heat issues, etc.

STRUCTURE magazine

40

TRADE SHOW

IN

RISA Technologies

Phone: 949-951-5815 Email: info@risa.com Web: www.risa.com Product: RISA-3D Description: Feeling overwhelmed with the latest seismic design procedures? RISA-3D has you covered with seismic detailing features including full AISC-341/358 code checks. Whether you’re using RISA-3D’s automated seismic load generator, or the built-in dynamic response spectra and time history analysis/design capabilities, designs and reports will meet all your needs.

Simpson Strong-Tie®

Phone: 800-925-5099 Email: web@strongtie.com Web: www.strongtie.com Product: Strong-Rod™ Anchor Tiedown System Description: Addresses many of the design challenges specifically associated with multi-story buildings that must withstand seismic activity.

Strong-Rod ATS takes into account such issues as rod elongation, wood shrinkage, construction settling, shrinkage compensating device deflection, incremental loads, cumulative tension loads, and anchorage.

Product: Strong Frame® Special Moment Frames Description: Features our patented Yield-Link® structural fuse, which is designed to bear the brunt of lateral forces during a seismic event.

PRINT 2017

SEISMIC Standards Design Group, Inc.

Phone: 806-792-5086 Email: alwaysalice2003@yahoo.com Web: www.standardsdesign.com Product: Wind Loads on Structures 4 Description: Performs computations in ASCE 7-10, Chapters 26-31 also ASCE 7-98, 02, 05, Section 6 and computes wind loads by analytical method rather than the simplified method, provides basic wind speeds from a built-in version of the wind speed, allows the user to enter wind speed. WLS4 has numerous specialty calculators.

Struware, LLc

Phone: 904-302-6724 Email: email@struware.com Web: www.struware.com Product: Struware Code Search Description: Provides all pertinent wind, seismic, snow, live and dead loads for your building in just minutes. The program simplifies ASCE 7 and IBC (and codes based on these) by catching the buts, ifs, insteads, footnotes, and hidden items that most people miss. Demo available at website.

Codes | Buckling Restrained Brace Engineered Products | Software

Trimble

The Steel Network, Inc.

Product: Tedds Description: Automate wind and seismic calculations and perform member designs. Built-in library of calculations allows quick calculation of ASCE 7 wind and seismic forces. Use one of our component design modules to design your beams, columns and foundations. Link the modules to create a professional report for review submittals.

WoodWorks Software

Phone: 770-426-5105 Email: kristine.plemmons@trimble.com Web: www.tekla.com Product: Tekla Structural Designer Description: Built-in loading wizards automatically calculate all wind and seismic forces, generate design cases, and optimize the design of steel and concrete members to the latest AISC, ACI and ASCE 7 design codes. Review detailed calculations with code clauses and print complete reports for review submittals.

Phone: 919-845-1025 Email: support@steelnetwork.com Web: www.steelnetwork.com Product: StiffWall Shear Wall Description: A stick build system designed to carry loads concentrically from the point of applied loads to the foundation or other termination point. Utilizes light gauge straps on both sides of the wall for shear resistance. Superior quality with high yield ASTM A1003 steel and hot-dipped galvanized coating.

Listings are provided as a courtesy, STRUCTURE magazine is not responsible for errors.

Phone: 800-844-1275 Email: sales@woodworks-software.com Web: www.woodworks-software.com Product: WoodWorks® Design Office Suite Description: Conforms to IBC 2015, ASCE 7-10, NDS 2015, SDPWS 2015; SHEARWALLS: designs perforated and segmented shearwalls; generates loads; rigid and flexible diaphragm distribution methods.

SIZER: designs beams, columns, studs, joists up to 6 stories. CONNECTIONS: Wood to: wood, steel or concrete.

Not listed? All 2017/2018 Resource Guide forms, including the 2018 TRADE SHOW IN PRINT, are now available on our website. www.STRUCTUREmag.org.

ADVERTISEMENT–For Advertiser Information, visit www.STRUCTUREmag.org

STRUCTURE magazine

41

TRADE SHOW

IN

PRINT 2017

CONCRETE Applied Science International, LLC

Design Data

Bentley Systems, Inc.

DEWALT

Phone: 919-645-4090 Email: support@appliedscienceint.com Web: www.extremeloading.com Product: Extreme Loading for Structures Description: A new advanced level of nonlinear dynamic structural analysis, which allows users to efficiently study structural failure from any number of actual or possible extreme events such as blast, seismic, and progressive collapse. Easily analyze reinforced concrete, steel composite, and other structures with all as-built and as-damaged details.

Phone: 800-BENTLEY Email: Samantha.Langdeau@bentley.com Web: www.bentley.com Product: RAM Concretes Description: Efficiently obtain reinforcement quantities for your gravity and lateral frames. Quickly compare alternative design schemes with accurate material takeoffs. Increase productivity and provide superior service to your clients, from conceptual design through construction, by producing detailed drawings and accurate cost estimates even in the most preliminary stages of your projects.

Concrete Masonry Association of California & Nevada

Phone: 916-722-1700 Email: info@cmacn.org Web: cmacn.org Product: CMD15 Design Tool for Masonry Description: Structural design of reinforced concrete and clay hollow unit masonry elements for design of masonry elements in accordance with provisions of Ch. 21 2010 through 2016 CBC or 2009 through 2015 IBC and 2008 through 2013 Building Code Requirements for Masonry Structures (TMS 402/ ACI 530/ASCE 5).

CTS Cement Manufacturing Corporation

Phone: 800-929-3030 Email: jong@ctscement.com Web: www.ctscement.com Product: Komponent® Shrinkage-Compensating Concrete Description: Allows for installation of industrial-size floors and concrete structures with no curling, no drying shrinkage cracking, and no control joints. SCC characteristics include reduced permeability, excellent durability, and little to no cracks, increasing concrete life cycle and lowering maintenance costs.

Product: Rapid Set® Cement Products Description: Out performs other concrete repair materials in durability, repetitive loading, chemical attack, permeability, freeze/thaw, abrasion resistance, and shrinkage. Rapid Set gets 3000 psi in one hour, achieving structural or drive-on strength in one hour. Use for concrete repairs, restoration, and new construction projects.

Phone: 402-441-4000 Email: david@sds2.com Web: www.sds2.com Product: SDS/2 Concrete Description: The newest solution offered by SDS/2 includes connection design to concrete walls, providing full design calculations. SDS/2 Concrete automatically recognizes framing situations to determine the type of connection and embed plate configuration to be used; the software also includes tools for automated placement of rebar in a 3D model.

Phone: 800-524-3244 Email: engineering@powers.com Web: anchors.dewalt.com Product: Mini-Undercut+™ Description: An ICC-ES approved ¾-inch embedment, flush mounted internally threaded anchor for use in cracked, uncracked, or seismic concrete conditions. This overhead anchor has a patent pending design specially engineered to work in Post-Tension or Hollow Core Concrete Slabs.

(See ESR-3912 for more details).

Dlubal Software, Inc.

Phone: 267-702-2815 Email: info-us@dlubal.com Web: www.dlubal.com Product: RFEM Description: Strength and serviceability limit state designs of reinforced beams, columns, slabs, and walls according to ACI 318, CSA A23.3, and other international standards. Includes Non-linear analysis of reinforced concrete elements in the cracked state for a realistic view of deformations, stresses, and crack widths for the serviceability limit state.

Ecospan Composite Floor System

Phone: 888-375-9787 Email: jason.thornton@nucor.com Web: www.ecospan-usa.com Product: Ecospan Composite Floor System Description: Provides open web structural components with a lighter weight composite design for elevated floor construction. It uses a unique configuration of components with high strength-to-weight ratios that allow for longer spans, shallower floor depths, greater rigidity and enhanced performance – without sacrificing aesthetics.

ENERCALC, Inc.

Phone: 800-424-2252 ENERCALC Email: info@enercalc.com Web: https://enercalc.com Product: Structural Engineering Library Description: Design modules for concrete beams, columns, slender wall panels, shear walls, footings, and cantilevered retaining walls. Fill-in-the-blanks worksheets make design easy and allow for quick evaluation of changes to any design parameter. The new graph of phiMn in Concrete Beam makes reinforcing design a snap!

STRUCTURE magazine

42

TRADE SHOW

IN

Additives | Lightweight Concrete | Post-Tensioning Precast Concrete | Reinforcement Products | Add-ons Heckmann Building Products, Inc.

Phone: 708-865-2403 Email: info@heckmannanchors.com Web: www.heckmannanchors.com Product: Pos-I-Tie® Veneer Anchoring System Description: Single barrel masonry anchor designed to penetrate continuous insulation and fasten securely to steel studs. Factory assembled EPDM washer completely seals penetrating hole from air and moisture. ThermalClip® accessory reduces thermal transfer. Passes NFPA 285, ASTM E2357 and ASTM E331 as part of the CavityComplete® Wall System.

Hilti, Inc.

Phone: 800-879-8000 Email: us-sales@hilti.com Web: www.Hilti.com Product: Hilti HIT-HY 200 Adhesive Anchoring System with SafeSet™ Description: Ultimate fast-cure performance and safety in design, now with 20% average higher published bond values, new grout filled masonry approvals, and the only product with no reductions for water saturated holes. Team up with Hilti’s SafeSet™ self-cleaning hole system and PROFIS Anchor.

Hohmann & Barnard, Inc.

Phone: 631-234-0600 Email: weanchor@h-b.com Web: www.h-b.com Product: TBS Thermal Brick Support Description: A groundbreaking brick veneer support system that reduces thermal bridging in relief angles, and allows for continuous insulation behind the shelf angle to improve the energy efficiency. This system is designed and engineered in-house to permit a widerange of adjustments to accommodate job site and project specific requirements.

A MiTek - BERKSHIRE HATHAWAY COMPANY

Inspection Instruments, Inc.

Phone: 216-831-6131 Email: gpiscsalko@pile.com Web: www.inspectioninstruments.net Product: Thermal Evaluation of Mass Pours (TEMP) Description: A system that measures temperatures in various points of a mass concrete pour, as the curing cement generates heat. TEMP allows for remote notifications via SMS.

Larsen Products Corp.

Phone: 800-633-6668 Email: claire@larsenproducts.com Web: www.larsenproducts.com Product: Weld-Crete® Description: Bonds new concrete, stucco, tile setting beds, and terrazzo to any interior or exterior structural surface. Weld-Crete’s open time lets you bond to concrete shear walls when needing a time lapse between the application of the bonding agent and the placement of reinforcement steel, formwork, or concrete.

PRINT 2017

CONCRETE

Additives | Lightweight Concrete | Post-Tensioning Precast Concrete | Reinforcement Products | Add-ons

POSTEN Engineering Systems

S-FRAME Software

Simpson Strong-Tie®

RedBuilt

Product: S-LINE Description: Design and detail reinforced concrete beams for both strength and serviceability to multiple codes. View interactive results including capacity envelopes on shear, moment and torsion diagrams.

Comprehensive reports incorporate equations employed, clause references and diagrams.

Product: Stainless-Steel Titen HD® Screw Anchor Description: For concrete and masonry; delivers the benefits of the popular Titen HD anchor and can be installed in permanent exterior and corrosive environments. Its innovative carbon helical-coil thread uses minimal carbon steel to cut the concrete for optimal corrosion resistance. continued on page 44

Phone: 510-275-4750 Email: sales@postensoft.com Web: www.postensoft.com Product: POSTEN X Description: The most efficient and comprehensive post-tensioned concrete software in the world that not only automatically designs the Tendons, Drapes, and Columns, but also produces highly efficient, cost saving, sustainable designs with automatic documentation of material savings for LEED. The others simply analyze – POSTEN DESIGNS.

Phone: 866-859-6757 Email: jjack@redbuilt.com Web: www.RedBuilt.com Product: RedForm I-Joists Description: Assembled with sheathing into tables for support of elevated slabs. Light weight, dimensionally consistent, and available with or without camber. Can clear-span up to 30 feet.

RedForm I-Joists are manufactured, designed and warranted for formwork applications.

Phone: 203-421-4800 Email: info@s-frame.com Web: s-frame.com Product: S-CONCRETE Description: S-CONCRETE code checks and details reinforced concrete walls, beams and columns. Design and detail in an easy-to-use, interactive environment.

View immediate results as parameters change. Run simultaneous code checks on multiple sections in batch mode. Comprehensive design reports include clause references, intermediate result,s and diagrams.

Phone: 800-925-5099 Email: web@strongtie.com Web: www.strongtie.com Product: Strong-Bolt® 2 Wedge Anchor Description: For cracked and uncracked concrete; now available in Type 304 stainless steel in standard sizes. The code-listed STB2 is classified as a Category 1 anchor under ICC-ES standards, the highest attainable category for performance in cracked concrete under static and seismic loading.

Listings are provided as a courtesy, STRUCTURE magazine is not responsible for errors.

Not listed? All 2017/2018 Resource Guide forms, including the 2018 TRADE SHOW IN PRINT, are now available on our website. www.STRUCTUREmag.org.

Bond With

ADVERTISEMENT–For Advertiser Information, visit www.STRUCTUREmag.org

PLASTER-WELD® The pink plaster-bonding agent WELD-CRETE® The pale blue concrete bonding agent Over 60 years of superior performance in the field.

800.633.6668

www.larsenproducts.com

structure-half-h-3-2017.indd 1

STRUCTURE magazine

43

TRADE SHOW

IN

PRINT 2017

3/7/17 9:05 AM

CONCRETE RISA Technologies

Phone: 949-951-5815 Email: info@risa.com Web: risa.com Product: RISAFloor ES Description: RISA offers everything you need for concrete design. For concrete floors, including beams and two way slabs, nothing beats RISAFloor ES for ease of use and versatility. The design of columns and shear walls with RISA-3D offers total flexibility.

Integration between RISA-3D and RISAFloor ES provides a complete building design.

Strand7 Pty Ltd

Phone: 252-504-2282 Email: anne@beaufort-analysis.com Web: www.strand7.com Product: Strand7 Description: Comprises preprocessing (with CAD import, automeshing), solvers (linear, non linear, dynamic and thermal), and post processing. For the analysis of concrete structures, provides functionality to consider short-term and long-term creep effects, including the effects of heat of hydration. An integrated RC module checks reinforcement design on plate/shell structures.

The Masonry Society

Phone: 303-939-9700 Email: info@masonrysociety.org Web: masonrysociety.org Product: Publications Description: The Masonry Society is a non-profit, professional organization of volunteer members, dedicated to the advancement of masonry knowledge.

Through our members, all aspects of masonry are discussed. The results are disseminated to provide guidance to the masonry and technical community on various aspects of masonry design, construction, evaluation, and repair.

Trimble

Phone: 770-426-5105 Email: kristine.plemmons@trimble.com Web: www.tekla.com Product: Tekla Structures Description: Move from design-oriented to construction-oriented engineering and enable structural engineers improved additional services.

Through our open and collaborative software environment, you can work with other disciplines and reduce RFIs. From concept to completion, Tekla software gives you collaboration and control.

Additives | Lightweight Concrete | Post-Tensioning Precast Concrete | Reinforcement Products | Add-ons United States Gyspum

Phone: 312-436-4260 Email: JMEstrada@usg.com Web: www.usg.com/structuralpanels Product: USG Structural Panels Description: High-strength, reinforced concrete panels for use in noncombustible construction.

Lighter than precast or poured concrete, USG Structural Panels install like wood sheathing and are mold-, moisture- and termite-resistant, providing a faster, easier and more efficient way to build.

WoodWorks Software

Phone: 800-844-1275 Email: sales@woodworks-software.com Web: www.woodworks-software.com Product: WoodWorks Design Office Suite Description: Conforms to IBC 2015, ASCE 7-10, NDS 2015, SDPWS 2015; SHEARWALLS: designs perforated and segmented shearwalls; generates loads; rigid and flexible diaphragm distribution methods. SIZER: designs beams, columns, studs, joists up to 6 stories.

CONNECTIONS: Wood to: wood, steel or concrete.

ADVERTISEMENT–For Advertiser Information, visit www.STRUCTUREmag.org

Weld-Crete®—The pale blue bonding agent with over 60 years of superior performance in the field.

Simply brush, roll or spray Weld-Crete® on to concrete or any structurally sound surface. Then come back hours, days or a week later and finish with new concrete, stucco, tile, terrazzo, other cement mixes or portland cement plaster. Plus Weld-Crete’s® low VOC content significantly reduces airborne pollutants that affect health and the environment.

Originators of leading chemical bonding agents… worldwide since 1952

800.633.6668 www.larsenproducts.com

STRUCTURE magazine

44

TRADE SHOW

IN

PRINT 2017

Stop by and visit MAPEI at the World of Concrete!

MAPEI/GRT Booth: #N1537 MAPEI Booth: #S11127

There’s a lot to see and do at MAPEI Booth #S11127 in the South Hall at World of Concrete 2018…

Dates: Tue 1/23 - Fri 1/26/18 Location: Las Vegas Convention Center MAPEI Booth: #S11127 (South Hall) MAPEI/GRT Booth: #N1537 (North Hall)

• View live demonstrations by our demo team each hour throughout the day.

• Talk with representatives in the booth about innovative solutions for your construction needs.

• Learn about new products designed to improve your results.

• Be sure to ask us about the MAPEI hospitality event during the show.

And, don’t forget to stop by Booth #N1537 in the North Hall to see the offerings from our concrete admixtures group, MAPEI/GRT.

To learn more about MAPEI before the show, visit us at www.mapei.com.

WOOD American Wood Council

Phone: 202-463-2766 Email: info@awc.org Web: www.awc.org Product: National Design Specification (NDS) Description: ANSI/AWC NDS-2015 National Design Specification (NDS) for Wood Construction is referenced in the 2015 International Building Code.

It includes design information for glulam, I-joists, structural composite lumber, wood structural panels, and cross laminated timber.

LifeSpan Decks

Phone: 919-845-1025 Email: swalden@steelnetwork.com Web: www.lifespandecks.com Product: Lifespan Steel Framed Decks Description: Different than wood framed decks that deteriorate over a short period of time, Lifespan Steel Framed Decks will last a lifetime. Options for concrete topped deck, composite topped deck, and overhead garage storage.

Meca Enterprises

DEWALT

Phone: 845-230-7533 Email: mark.ziegler@sbdinc.com Web: http://anchors.dewalt.com Product: HangerWorks Description: Automates placement and design of hangers and seismic bracing for MEP systems. The plugin tool enables users to size hanger assemblies based on the weights of the MEP system (including component contents) and determine hanger locations based on building code requirements and user-defined project standards.

Dlubal Software, Inc.

Phone: 267-702-2815 Email: info-us@dlubal.com Web: www.dlubal.com Product: RFEM Description: Structural analysis program which includes USA/International design codes for steel, concrete, timber, CLT, aluminum, glass, and fabric/ membranes. Capable of non-linear analysis of member, plate, and solid elements complete with code references and detailed design results. Direct interface with BIM and CAD software to incorporate seamless and bi-directional data exchange.

ENERCALC, Inc.

ENERCALC Phone: 800-424-2252 Email: info@enercalc.com Web: https://enercalc.com Product: Structural Engineering Library Description: Whether it’s wood beams, columns, ledgers or shear walls, ENERCALC’s SEL can handle it with ease. Have wood trusses to design or check? Use the 2D Frame module. Built-in databases for sawn lumber and engineered wood products put section properties and allowable stresses at your fingertips.

Hoover Treated Wood Products, Inc.

Connectors | Engineered Lumber | I-Joists Siding/Rimboard/Panels

Phone: 800-531-5558 Email: pam@plywall.com Web: www.plywall.com Product: PLYWALL® Pre-Engineered Noise Barrier Description: Pre-engineered, pre-fabricated treated wood barrier system used for noise abatement and aesthetic screening. Tested in accordance with ASTM E-90 with performance and STC ratings comparable to concrete and masonry. Heights range from 6 to 32 feet and can meet the new IBC Codes for wind loading.

Phone: 918-258-2913 Email: support@mecaenterprises.com Web: www.mecaenterprises.com Product: MecaStack Software Description: Widely used software for designing self-supported and guy wire supported steel stacks. An easy to use Windows based interface allows designers to quickly model a stack. Load Combinations and factors can be customized as needed. Output is easy to navigate and problem areas can be located quickly.

Mka Software and Engineering

Phone: 90 232 765 91 51 Web: www.mkasteel.com/en Product: Mergen Description: The first, one dimensional nesting software that can take splices into account. Importing NC1 files, 3D simulation with IFC, optimization with the splices’ profiles, placing splices away from clearance holes and welded members, and transferring cutting plans on CAD environment.

RedBuilt

Phone: 866-859-6757 Email: rruim@redbuilt.com Web: www.redbuilt.com Product: RedSpec™ Description: Quickly and efficiently create floor and roof design specifications using Red-I-joists, open-web trusses, and RedLam for a variety of applications. A central component is FloorChoice™; allows a floor to be evaluated while still in the design phase, providing an easy-to-understand numerical rating system.

RISA Technologies

Phone: 800-332-RISA Email: info@risa.com Web: www.risa.com Product: RISAFloor and RISA-3D Description: The premiere software package for wood design. Create 3D models of your entire structure and get full design of wood walls (with and without openings), flexible wood diaphragms, dimension lumber, glulams, parallams, LVL’s, joists and more.

Custom databases for species, hold-downs, and panel nailing offer total flexibility.

Listings are provided as a courtesy, STRUCTURE magazine is not responsible for errors.

STRUCTURE magazine

47

TRADE SHOW

IN

SCIA, a Nemetschek Company

Phone: 443-393-3616 Email: b.follett@scia.net Web: www.scia.net/en Product: SCIA Engineer Description: Looking to improve your 3D design workflows? SCIA Engineer links structural modeling, analysis, design, reporting and interoperability in ONE program. Design to multiple codes. Tackle large projects with advanced non-linear and dynamic analysis. Plug into BIM with IFC and bi-directional links to Revit, Tekla and others.

S-FRAME Software

Phone: 604-273-7737 Email: info@s-frame.com Web: s-frame.com Product: S-FRAME Analysis Description: Model, analyze and design structures regardless of geometric complexity, material type, loading conditions, nonlinear effects or design codes.

Integrate concrete, foundation and steel in a single work environment for maximum productivity. Release 2017 run 25% faster, includes new simplified 2D elements, new nonlinear analysis, new codes, and more.

Trimble

Phone: 770-426-5105 Email: kristine.plemmons@trimble.com Web: www.tekla.com Product: Tedds Description: Using Tedds, you can design a range of wood elements, including: beams (single span, multi-span and cantilever); wood columns; sawn lumber, engineered wood, glulam and flitch options; shear walls (multiple openings; segmented or perforated); connections (bolted, screwed, nailed, wood/wood and wood/steel); produce detailed and transparent documentation.

Trimjoist Corporation

Phone: 800-844-8281 Email: marty.hawkins@trimjoist.com Web: www.trimjoist.com Product: TrimJoist Description: Combination of an open web floor truss and a wood I-joist bringing the best features of each together to form a trimmable floor truss. As the name indicates, it can be trimmed on the construction site for a perfect fit. TrimJoist is produced in stock lengths from 4 feet to 30 feet, and in depths of 117⁄8-, 14- 16and 18-inch.

WoodWorks Software

Phone: 800-844-1275 Email: sales@woodworks-software.com Web: www.woodworks-software.com Product: WoodWorks Software Description: Conforms to IBC 2015, ASCE 7-10, NDS 2015, SDPWS 2015; SHEARWALLS: designs perforated and segmented shearwalls; generates loads; rigid and flexible diaphragm distribution methods. SIZER: designs beams, columns, studs, joists up to 6 stories.

CONNECTIONS: Wood to: wood, steel or concrete.

PRINT 2017