5 KG
2 KG
500 100 APPROX G G NO.KGPER
FLATHEAD AG SILICONE BRONZE 19 mm 1.60 40 mm 2.80 50 mm 2.80 65 mm 3.15 75 mm 3.15 ROSEHEAD AG SILICONE BRONZE 50 mm 2.80 65 mm 3.15 75 mm 3.15
• • • • • • • • • •
•
• • •
2735 438 357 217 172 357 217 172
STAPLES LENGTH
DIA. (MM)
20 KG
5 KG
2.80 3.15 4.00 4.00 4.00
• • • •
• • • • • •
2.00 2.80 3.15 4.00 4.00
• • • • • • • •
DIA. (MM)
15 KG
BARBED 27 mm 30 mm 40 mm 45 mm 50 mm PLAIN 19 mm 27 mm 30 mm 40 mm 50 mm
2 KG
500 APPROX G NO.KGPER
360 260 120 120 105
• •
360 360 260 120 105
ROOFING LENGTH
SUPERSEAL 12.5 60 mm 4.00 75 mm 4.00 TWISTED SPRINGHEAD 12.5 60 mm 3.15 75 mm 3.15
• •
5 KG
2 KG
500 APPROX G NO.KGPER
• • • •
115 100
• • • •
150 120
RURAL & FENCING
NZS 3604:2011 defines the zones as category A (very low), category B (low), category C (medium), category D (high) and category E (very high). Category A is not applicable in New Zealand Three exposure zones - zone B, zone C and zone D - are shown on a map of the North and South Islands. The zones relate to the severity of exposure to wind-driven salt, with B being low risk, C medium risk and D high risk. Zone D includes: all offshore islands, and the area within 500m of the coastline of New Zealand, including harbour the area within 100m of tidal estuaries and sheltered inlets. Building Code compliance document E2/AS1 (2011) includes an exposure zone E, which is beachfront regions subject to rough seas and surf beaches. NZS 3604:2011 contains the comment: “For the purposes of NZS 3604, the corrosion protection requirements for structural fixings in exposure zones D and E are identical.” Microclimatic factors need to be considered in all locations.
PRODUCT GUIDE
NAILS
NAILS
DIA. (MM)
PRODUCT GUIDE
LENGTH
EXPOSURE ZONES
Zone B Zone C Zone D The Hurricane range includes: Home Fence Gates School Fence Gate Fittings Security Panel Fence Fencing Wire Chain Link Fence Posts Staples & Barbed Wire Deer Fence
CONTACT US TODAY: 0800 478 335 www.steelandtube.co.nz
6ST166
6ST166
MAY 2018
BRONZE NAILS
For over 80 years Hurricane has provided a range of high quality, hard wearing products made to last in New Zealand’s harsh environment.
BRIGHT NAILS LENGTH
DIA. (MM)
JOLTHEAD 40 mm 2.00 50 mm 2.25 60 mm 2.80 75 mm 3.15 90 mm 3.55 100 mm 4.00 FLATHEAD 40 mm 2.00 50 mm 2.25 60 mm 2.80 75 mm 3.15 90 mm 3.55 100 mm 4.00
15 KG
5 KG
• • • •
• • • • • •
• • • •
• • • • •
2 KG
• • • • • • • • • •
500 APPROX G NO.KGPER
• • • • • • • • • • • •
930 500 330 210 138 98 905 475 320 205 132 93
CLOUTS LENGTH
DIA. (MM)
15 KG
5 KG
2 KG
500 APPROX G NO.KGPER
GOLD CLOUT PLASTERBOARD AG 30 mm 2.80 40 mm 2.80 GALVANISED CLOUT PLASTER BOARD 25 mm 2.50 30 mm 2.50 40 mm 2.50 GALVANISED CLOUT UNDERLAY 25 mm 2.50 GALVANISED CLOUT BRACKET 30 mm 3.15
• • • • • • •
640 500
• • • • • • • • •
660 570 450
• •
780
• • •
440
HURRICANE RURAL & FENCING > NAILS | MAY 2018
STAINLESS NAILS (316 GRADE) LENGTH
DIA. (MM)
5 KG
2 KG
JOLTHEAD 50 mm 2.80 60 mm 3.15 75 mm 3.15 90 mm 4.00 100 mm 4.00 FLATHEAD 30 mm 2.80 40 mm 2.80 60 mm 2.80 60 mm 3.15 75 mm 3.15 90 mm 4.00 100 mm 4.00 ROSEHEAD 50 mm 2.80 60 mm 3.15 75 mm 3.15 90 mm 4.00 100 mm 4.00 DECKING FLATHEAD AG 60 mm 3.15 75 mm 3.15 CLOUT FIBRE CEMENT 40 mm 2.80 50 mm 2.80 CLOUT BRACKET 30 mm 3.15 45 mm 3.15
• • • • •
• • • •
500 100 APPROX G G NO.KGPER
• • • • •
• • • •
270 205 132 93
• • • • • • • • • • • • •
1230
• • • • •
330 210 110 100
• • • • •
270 205 132 93
• • • • • •
255 210
• • • • • •
470 375
• • • •
460 ?
PLATED PANEL PINS LENGTH
DIA. (MM)
ZINC PLATED 19 mm 1.60 25 mm 1.60 30 mm 1.60 40 mm 1.60 50 mm 2.00
5 KG
• •
2 KG
LENGTH
• • • • •
3000 2400 2000 1520 780
DIA. (MM)
15 KG
5 KG
2 KG
JOLTHEAD 40 mm 2.00 50 mm 2.50 60 mm 2.80 75 mm 3.15 90 mm 3.55 100 mm 4.00 125 mm 5.30 150 mm 6.00 FLATHEAD 19 mm 1.60 25 mm 1.60 40 mm 2.00 50 mm 2.50 60 mm 2.80 75 mm 3.15 90 mm 3.55 100 mm 4.00 125 mm 5.30 150 mm 6.00 FLATHEAD FIBRE CEMENT 40 mm 2.80 50 mm 2.80 WEATHERBOARD BOARD 60 mm 3.15
840 450 300 190 125 88 45 29
• • • • • • • • • •
2900 2270 815 435 295 185 122 95 42 27
• • • • • • • •
432 358
• • • • • •
• • • • • • •
• • • • • •
500 APPROX G NO.KGPER
• • • • • • • •
• • • •
• • • • • • • •
• • • • • • •
•
•
254
GALVANISED DECKING/FLOORING (ANNULAR GROOVED) LENGTH
500 250 APPROX G G NO.KGPER
• • • • •
GALVANISED NAILS
DIA. (MM)
15 KG
5 KG
FLATHEAD FLOORING AG 60 mm 3.15 FLATHEAD DECKING AG 75 mm 3.15 FLATHEAD PALING AG 60 mm 2.80
2 KG
500 APPROX G NO.KGPER
• • • •
240
• • • •
195
• • •
260