A better workday!
staring.dk
Staring mixing cart with a 75L plastic bucket, specially designed for the application of floor leveling compound.
This model of mixing cart makes it easy to handle many smaller tasks where a piping system is preferred over a tub mixer or forced mixer.
The mixing cart can be used with a bracket, easily mounted on the edge. This special bracket is used for the fixed installation of piping. Once the piping is installed, you can easily and effortlessly create your mixtures in an ergonomically correct position, without shoulder strain.
With the special bracket, the piping can be secured during application.
When the correct whisk is used on the piping, uniform and smooth mixtures are achieved without lumps.
Subsequently, the cart is easily transported to the task, where the cart is designed to tip and apply the material effortlessly.
Trolley Mixer
STB-75L [ STB-00750000CHK ]
Trolley specifications:
• Grosss volume 75 liter
• Type of Mixers Most Types
• Total weight with Tub 7,5 kg
• Diameter of Tub 440 mm
• Height of Tub 630 mm
ATTENTION: Electric mixer not included but can be supplied!
Weight Tub (empty)
Weight metal part
weight of cart
MODEL
STB-75L.
Counterflow Mixer
BLM-65 [ STB-00651200M ]
The BLM-65 Counterflow Mixer is a highly practical and compact mixer, equipped with a powerful motor that makes it ideal for a wide range of smaller mixing jobs. The combination of a centrally mounted whisk and side-mounted mixing arms rotating in opposite directions delivers faster, more uniform mixing — every time.
The mixer features a Snaplock system for easy and secure attachment of the mixing tub, along with a safety grid lid fitted with a built-in safety switch.
Thanks to its low weight, the BLM-65 is easy to handle and perfect for jobs where flexibility and mobility matter.
Applications:
• Mortar
• Plaster
• Tile adhesive
• Glue
• Epoxy (resin)
• Paint
• Cement mixtures
with fine particles
MODEL
Snaplock for mixing tub.
Dual mixing function
Drum mixer, concrete mixer, a beloved child has many names.
Staring’s experience in the production of this type of mixer goes back more than 50 years, and therefore attention has been paid to details.
Ideal for bricklayers, contractors, farmers, and other professional and semiprofessional users.
Drum Mixer
STB-140F [ STB-140F ]
Drum mixer specifications:
• El-Motor 1x230 V – 50 Hz
• Steering Wheel for emptying the drum
• Mixing Capacity (Volume) 140 L.
• Solid Rubber Transport Wheel
• Handle for pulling the Mixer
• Steel Toothed Wheels
Staring no.
Mixing Capacity
Barrel Opening
Mixing Arms
Toothed Wheel
Weight (empty)
Dimension Wheels
Spin Direction
Voltage Volts
L
Iron
mm
Pan Mixer
STB-65 [ STB-006515230CHK ]
Pan mixer specifications:
• El-Motor 1,1 Kw 1x230 V – 50 Hz S1 (2,0 Kw S6)
• Hinged net Cover with Sack Knife
• Solid Rubber Transport Wheel
• Loading Wheels on Handle
• Epoxy Coated Mixing Pan and Frame
• Magnet Switch as Safety Cut-out
• Mixing head with Mixing Arms made of Chrome Nickel Steel
• Replaceable Mixing paddle (rubber)
• Adjustable Discharge height
• Mixing Capacity (Volume) 65 L.
Forced mixer with a capacity of approximately 90 liters is the perfect all-around mixer, suitable for many products across various industries.
The special design of the mixing head ensures absolutely efficient mixing of materials and keeps the mixing drum clean.
The efficient mixing head comes standard with steel paddles. The mixing head can be lifted out of the drum without the use of tools, making cleaning and adjusting the mixing arms hassle-free. The mixing paddles can be adjusted individually.
STB90 comes with a patented vibration system for improved discharge.
Pan Mixer
STB90 [ STB009015230CHK ]
The mixer is delivered with:
• Patented vibration system for improved discharge.
• Safety lid with sack knife.
• Safety switch on the lid.
• Tilting grid for buckets.
• Adjustable paddles and arms.
• Loading wheels.
• Puncture-proof wheels.
The design of the STB90 makes the mixer easy for one person to operate.
The high-mounted loading wheels make it easy to load the mixer.
The lid is hinged and comes with a sack knife and a magnetic safety switch.
Pan Mixer
Pan mixer specifications:
• El-Motor 1,5 Kw 1x230 V - 50 Hz S1 (2,2 Kw S6)
• Hinged net Cover with Sack Knife
• Solid Rubber Transport Wheel
• Loading Wheels on Handle
• Epoxy Coated Mixing Pan and Frame
• Magnet Switch as Safety Cut-out
• Mixing head with Mixing Arms made of Chrome Nickel Steel
• Replaceable Mixing paddle
Pan Mixer
STB-200 [ STB-020030400CHK ]
Pan mixer specifications:
• El-Motor 3,0 Kw 3x400 V - 50 Hz S1 (4,0 Kw S6)
• Hinged net Cover with Sack Knife
• Solid Rubber Transport Wheel
• Loading Wheels on Handle
• Epoxy Coated Mixing Pan and Frame
Pan Mixer
STB-300 [ 030030400CHK ]
Pan mixer specifications:
• El-Motor 3,0 Kw 3x400 V - 50 Hz S1 (4,0 Kw S6)
• Hinged net Cover with Sack Knife
• Extra Add-On Closed Cover as picture
• Solid Rubber Transport Wheel
• Epoxy Coated Mixing Pan and Frame
• Magnet Switch as Safety Cut-out
• Mixing head with Mixing Arms made of Chrome Nickel Steel
• Replaceable Mixing paddle
• Mixing Capacity (Volume) 300 L.
Pan Mixer
STB-500 [ STB-0500075400CHK ]
Pan Mixer specifications:
• El-Motor 7,5 Kw 3x400 V - 150 Hz (S1)
• Gross volume app. 500 litre
• Output app. 300 litre
• Pan diameter 1250 mm
• Main shaft, RPM 30
• No. of mixer arms 3
• Emptying height 800 mm
• Total weight 600 kg
• Total length 1450 mm
• Total width 1300 mm
• Total height 1600 mm
The Mixer includes:
• Safety cover w/ bagsplitter
• Safety grid at discharge
• Magnetic safety cut-out
• Transportwheel
• Guard w/discharge
PERFECT FOR MIXING CONCRETE, MORTAR, LECA AND DRY MIXTURES!
Pan Mixer
SM-324 [ 032430400CHK ]
Pan mixer specifications:
• El-Motor 4,0 Kw 3x400 V - 50 Hz S1 (4,0 Kw S6)
• Output app 150-170 liter / 120 kg.
• Pan diameter 1000 mm
• Main shaft, RPM 35
• 3 mixer arms + sidescraber
Pan Mixer
Pan mixer specifications:
• El-Motor 4,0 Kw (S1) - 400 V / 50 Hz
• Hinged net Cover with Sack Knife
• Extra Add-On Closed Cover as picture
• Solid Rubber Transport Wheel
• Epoxy Coated Mixing Pan and Frame
• Magnet Switch as Safety Cut-out
• Mixing head with Mixing Arms made of Chrome Nickel Steel
• Replaceable Mixing paddle
• Mixing Capacity (Volume) up to 125 L.
Pan Mixer
SM-340 [ 0340 ]
Pan mixer specifications:
• El-Motor 5,5 kW or 7,5 kW (S1) - 400 V / 50 Hz
• Output app 170 liter (300 L.) / 300 kg.
• Pan diameter 1000 mm
• Main shaft, RPM 35
• 3 mixer arms + sidescraber
• Emptying height 830 mm
• Mixing Capacity (Volume) up to 300 L.
Starings’ large and primarily stationary Pan mixers are designed for mixing a wide range of products.
These mixers are mainly used in the refractory industry, but are also suitable for other industries or applications where a mixer in stainless steel is required.
The mixing paddles are mounted on a specially designed mixing head, which is loosely seated on the main shaft. This design reduces wear and simplifies cleaning, as the mixing head can be lifted out of the drum without the use of tools. The mixing drum itself is loosely mounted on the frame, allowing for easy replacement when worn. The mixer is standardly equipped with replaceable wear plates made of TYPE2 steel.
The mixing head and lid are fitted with lifting eyes, while the drum is equipped with handles. All mixer sizes can be supplied with
Pan Mixers
1500L-2000L-3000L [ 1510 - 2010 - 3010 ]
The mixers include:
• Safety lid
• Safety grid at discharge
• The mixers are equipped with a star-delta switch and motor protection
• Wear plates
• Hydraulic opening
• Hard metal coated shovels
• Riser scrapers
• Outer scrapers
Recommended for:
• Concrete
• Mortar
• Leca (light expanded clay aggregate)
• Dry mixtures
• Special cements with low water content
• Food industry
• Chemical industry
• Refractory Mixing
In addition to a standard range of mixers, Staring offers the development and manufacturing of complete mixing plants with all the necessary equipment.
Staring Megamixers are rugged and efficient, especially when it comes to mixing materials with low cement content (LCC).
Our Megamixers are made for mixing following materials:
• Refractory material
• Concrete
• Epoxy products
• Cement-based material
• Spackle
• Insulating materials
• Dry mixes
• Mortar
Mega Series
Mixers perfect for Refractory Mixing
Staring Mega 1000
Staring Mega 500
Electric Mixers
For the professional craftsman and handyman alike, Staring offers the perfect solution for mixing cement, mortar, glue, epoxy, and similar materials with our range of electric mixers.
Available in 4 variants ranging from 1200W to 1800W, each model features a robust two-speed gear motor with variable speeds and comes complete with a corresponding whisk and a 2-meter cord.
Moreover, the STM1600 and STM1800PRO models are equipped with “Soft-start” and impact-resistant protection near the handle, providing added convenience and durability during operation.
THE STM1600 AND STM1800PRO MODELS ALSO FEATURE AN AUTOMATIC HOLD FUNCTION DURING OPERATION!
NOTE: Standard 14mm thread for paddle attachment.
(EU 5 TYPE)
FRONT HOOK DESIGN PROTECTS AGAINST IMPACT WITH CURBS.
TRANSPORT WHEELS ENABLE EASY AND FAST TRANSPORTATION.
EFFICIENT COMPACTION
Vibratory Plates
STV-070 / STV-090
Staring’s vibratory plate series delivers ample power and user comfort for the job. Supplied vibration-dampened and equipped with powerful HONDA engines.
Specifikationer:
• Streamlined design – Enables faster forward movement and improved ability to handle inclines.
• Dual-layer steel base plate – Features a self-cleaning function.
• One-piece pressed base plate – With raised edges that leave no compaction marks.
• Ergonomic handle – Anti-vibration system effectively reduces operator fatigue.
• Removable large water tank – Equipped with an ergonomically designed watering pipe.
• Transport wheels – For easier maneuverability. MODEL
(EU 5 TYPE)
CAST IRON BASE PLATE – EXTRA DURABILITY AND LONG LIFESPAN.
INTEGRATED TRANSPORT WHEELS – ENABLE EASY AND FAST TRANSPORTATION.
HYDRAULIC HANDLE – ENABLES FORWARD AND REVERSE OPERATION.
Vibratory Plates
STV-135 / STV-165
Staring’s plate compactor series delivers ample power and user comfort for the task. Supplied vibration-dampened and equipped with powerful HONDA engines.
Specifications:
• Hydraulic handle – Easy to switch for moving the plate compactor forward and backward, as well as performing stationary spot compaction.
• Adjustable handle – Can be set to the desired working height.
• Durable vibrator unit – Equipped with two sets of eccentric shafts for high working efficiency.
• Sealed belt cover – Protects against the ingress of sand and soil.
• Optional extension plate and wheel kit – For increased flexibility and easy transport.
ACCURACY
Water accuracy is very important to many of the new materials eg. those with low water/cement content. Using this system the water is metered with a very precisely accuracy.
DISCOLOURATION
The addition of inexact quantities of water can cause destruction and discolouration of material.
STRENGTH
Uniform distribution of water throughout the material provides strength.
Water Dosage
Water dosage specifications:
• CCE socket for a 220 V connection
• Water connection - Depend
• Water dosage - Depend
• Display type - in/show the chosen
• Start - Switch for start up dosage
• Manual/automatic - Turning switch for manual/automatic dosage
• Accuracy 0,1 L
ATTENTION: this water dosage system is special configured to be used in conjunction with our pan mixers.
NOTE: ALL SILO SOLUTIONS FROM STARING CAN BE CUSTOMIZED TO MEET SPECIFIC NEEDS AND REQUIREMENTS!
Fiberglass Silo 1,2
m3
Silo System for Filling from Big Bags
The system is designed for construction tasks where bag filling is too slow and often too costly, and where larger silos might be excessive, both in volume and physically.
The silo is delivered as standard with a vibrator motor to prevent bridging, a sliding gate, a grid for collecting larger lumps, forklift pockets, height-adjustable legs, and more.
Our 1.2 m³ Fiberglass Silo comes with:
• Galvanized adjustable telescopic legs
• Adjustable
• Forklift pockets for lifting
• Sealed dustproof lid
• Lifting lugs
• Ø250mm butterfly valve
Silo Specifications:
• Approx. capacity: 1.2 m³
• Weight without material: 500 kg
• Minimum height: 2530 mm
• Maximum height: 3390 mm
• Legs: 3 height-adjustable legs
• Length/width: 1500 x 1500 mm
• Screw conveyor length: As desired
• Height under screw conveyor: Variable
Flow Mixer
Ø114 x 600 mm
NOTE: ALL SILO SOLUTIONS FROM STARING CAN BE CUSTOMIZED TO MEET SPECIFIC NEEDS AND REQUIREMENTS!
Fiberglass Silo 1,8
m3
Silo System for Filling from Big Bags
The system is designed for construction tasks where bag filling is too slow and often too costly, and where larger silos might be excessive in both volume and physical size.
The silo is delivered as standard with a vibrator motor to prevent bridging, a sliding gate, a grid for collecting larger lumps, forklift pockets, height-adjustable legs, and more.
Our 1.8 m³ Fiberglass Silo comes with:
• Galvanized adjustable telescopic legs
• Adjustable
• Forklift pockets for lifting
• Sealed dustproof lid
• Lifting lugs
• Ø250mm butterfly valve
Silo Specifications:
• Approx. capacity: 1.8 m³
• Weight without material: 600 kg
• Minimum height: 3190 mm
• Maximum height: 3990 mm
• Legs: 3 height-adjustable legs
• Length/width: 1500 x 1500 mm
• Screw conveyor length: As desired
• Height under screw conveyor: Variable
Flow Mixer
Ø114 x 600 mm
Piccolo Silo 1,2
m3
The Piccolo silo from is the smallest silo in our standard program.
The silo has a capacity of 1.2 m³. It is delivered with a flange that fits a butterfly valve or can be connected directly to a screw conveyor/ mixer. The silo is designed for filling from Big Bags with a ”nose” (spout). However, it can be adapted for flat-bottomed Big Bags but requires an additional attachment box.
Our 1.2 m³ Piccolo Silo comes with:
• Galvanized adjustable telescopic legs
• Forklift pockets for lifting with a truck
• Lifting lugs
• Sealed dustproof lid
• 1” angled pipe for air venting
• Ø250mm butterfly valve
• Vibrator
Silo Specifications:
• Approx. capacity: 1.2 m³
• Weight without material: 500 kg
• Minimum height: 2530 mm
• Maximum height: 3390 mm
• Legs: 2 height-adjustable legs
• Length/width: 1500 x 1500 mm
• Screw conveyor length: As desired
• Height under screw conveyor: Variable
NOTE: ALL SILO SOLUTIONS FROM STARING CAN BE CUSTOMIZED TO MEET SPECIFIC NEEDS AND REQUIREMENTS!
Piccolo Silo
1,8 m3
The Piccolo silo from is the smallest silo in our standard program.
The silo has a capacity of 1.8 m³. It is delivered with a flange that fits a butterfly valve or can be connected directly to a screw conveyor/ mixer. The silo is designed for filling from Big Bags with a ”nose” (spout).
However, it can be made to accommodate flat-bottomed Big Bags but requires an additional attachment box.
Our 1.8 m³ Piccolo Silo comes with:
• Galvanized adjustable telescopic legs
• Forklift pockets for lifting with a truck
• Lifting lugs
• Sealed dustproof lid
• 1” angled pipe for air venting
• Ø250mm butterfly valve
• Vibrator
Silo Specifications:
• Approx. capacity: 1.8 m³
• Weight without material: 500 kg
• Minimum height: 2530 mm
• Maximum height: 3390 mm
• Legs: 2 height-adjustable legs
• Length/width: 1500 x 1500 mm
• Screw conveyor length: As desired
• Height under screw conveyor: Variable
Flow Mixer
Ø114 x 600 mm
Recommended for use with:
• Gravel
• Concrete
• Soil
• Rubble
• Sand
• Mortar
Example of use:
In basement excavations with narrow access or other hard-to-reach areas Filling mixers.
Conveyer Belt
]
]
]
Staring conveyor belt for many tasks. The conveyor belt comes with a transport cart, and due to the belt’s low weight, it is incredibly easy to handle. Using the lifting handles at both ends, the belt can be easily positioned. Special brackets for attaching to pan mixer lids are also available. The construction of aluminum profiles makes the belt one of the lightest on the market. Additionally, the specially designed profiles provide a very sturdy structure.
When using a loading box, it’s easy to fill the conveyor belt, and it operates at a height of only 40 cm.
Cleaning the belt is almost eliminated. Along the sides of the belt, a felt edge is attached. This felt edge seals tightly to the rubber belt, preventing material from being pulled underneath the belt. The belt also operates without disruptive rollers, running instead on a smooth stainless steel plate.
STP2-450
Submersible Pump
STP2-450 [ STP2-450 ]
This pump is specially suitable for: SAND – MUD – SLUDGE
Compact 2” contractor pump for pumping sand and gravel-laden water. The STP2-450 pump, with its top discharge, is particularly well-suited for tasks with limited space.
The pump keeps itself cool by pumping water. The impeller is made of polyurethane.
The STP2-450 comes with a thermal protector that shuts off the pump at high temperatures. The pump restarts automatically after cooling down.
The pump’s bottom strainer has an 8 mm passage. 10 m rope included.
The pump’s discharge can be rotated, making the outlet perpendicular to the pump.
The set consists of: 1 pump, 15 m hose with couplings, Storz coupling, and impact-resistant plastic box.
STP2-480DW
Also available as box set!
Submersible Pump
[
]
The pump is suitable for:
• Total emptying after water leakage
• Total emptying of containers after cleaning
• Total emptying of swimming pools
• Emptying of concrete decks
• Emptying low-lying construction sites
STARING STP2-480DW is a traditional submersible pump which is also suitable as “water sucker”. STP2-480DW, a compact lightweight pump with high efficiency, which is made in an epoch-making design with fixed bottom that enables the absorption of water residues down to 1.0 mm water level.
Contra/flap valve on the suction side makes the water does not return even if the pump is stopped.
The bottom is provided with a rubber plate, so that the pump does not damage/scratch the surface it is placed on.
The outlet on the pump can be reversed as follows, that the outlet is perpendicular to the pump. This is a great advantage when the pump is placed on floor. This prevents the hose from kinking.
The pump is supplied with thermal fuse, 10 m rope, hose connector mounted on 1” thread, where storz coupling can also be mounted, and 10m. cable with approved impact-resistant connector.
STP2-500
Also available as box set!
Contractor Pump STP2-500 SERIES
Pump specifications:
• The pumps are supplied with:
• Pump housing in cast iron, which is particularly resistant to wear and tear high throughput.
• Scooter made of polyurethane.
• 10 mm free distance between impeller and pump housing that ensures large through flow and stable pump characteristic.
• Bottom strainer with 10 mm holes that prevents larger particles in blocking the impeller.
• Thermal fuse which switches off the pump from too high temperatures.
• Storz clutch
• 10 m rope
• Approved impact-resistant plug
STP2-500 pumps remove SAND - MUD - SLUDGE as if it were the pure water!
The pump is also available with an automatic function (STP3-750A).
Contractor Pump STP3-750 SERIES
STP3-750 Pumps: Built for Contractors to Handle Sand, Mud, and Sludge Like It’s Clear Water!
The STP3-750 is one of the most powerful 230V contractor pumps on the market, thanks to its top-quality features::
• Cast Iron Pump Housing: Highly resistant to wear and capable of handling high flow rates.
• Polyurethane Impeller: Durable and efficient for long-term performance.
• 10 mm Clearance Between Impeller and Housing: Ensures excellent flow capacity and stable pumping characteristics.
• Base Strainer with 10 mm Holes: Prevents larger particles from clogging the impeller.
• Thermal Protection: Automatically shuts the pump off at high temperatures to prevent damage.
• Storz Coupling, 10 m Rope, and Durable Impact-Resistant Plug: Ready for tough job sites.
Ideal for contractors who need reliable performance, even in demanding conditions.
Grinder Pumps
STP-1500MG [ STP-1500MG ]
STP-1800MG [ STP-1800MG ]
Exceptionally strong grinder pumps constructed with a cast iron pump housing and a stainless steel motor housing.
Supplied in 230V, these pumps come with a float switch for start/stop functionality. The safety feature automatically engages again.
With the cutter function, this model is well-suited for sewage and pumping black wastewater.
The STP series is equipped with thermal protection that turns off the pump if it becomes too hot.
Knife Pump STP10 SERIES
[ STP10-2.2 ]
[ STP10-2.2T ]
[ STP10-3T
Special knife pump series in 2 sizes, built with a separate high-speed knife function at the inlet, preventing impellers from blocking. All 3 sizes are made of cast iron, making them resistant to saltwater.
The series consists of one 230V and two 400V pumps.
With the cutter function, all 3 models are suitable for pumping black sewage water.
The STP series is equipped with a thermal protection that shuts off if the pump becomes too hot. The safety feature automatically resets.
Please note! The pump is also available in other sizes, refer to the product sheet for additional information and technical data.
SPECIAL HIGH EFFICIENT PUMP WITH GRINDING IMPELLER
Pump Well 200L. FOR SEWAGE WATER
Pump Well Components:
• 1 unit plastic well, 200 L capacity.
• Loose cover with ventilation hole/pressure relief.
• 2 lifting handles.
• Inlet ø110mm or as per agreement.
• Pump with grinder and electronic switch.
• Outlet pipe with solvent-weld fitting.
• Union for quick disconnection of the pump.
• Outlet size 1” or as per agreement.
• Inlet/outlet penetration with seals in the well.
• Reinforcement in the well for pump and outlet pipe.
Pump well
Pump Included in Well
Construction Hoses
With or without Storz
Starings constructionhoses with Storz couplings are ideal for various construction and civil engineering projects.
The hoses transport water and other liquids easily and efficiently, secured by Storz couplings on both ends.
The hoses are available in a variety of sizes and lengths and can be supplied for both 8 and 13 bar pressures.
The hoses are lightweight and can easily be rolled up for storage and transport.
PVC Contractor Hoses
With or Without Storz Coupling
Staring’s contractor hose is ideal for connecting contractor pumps and other construction or industrial applications. This blue PVC hose is made from durable, weather-resistant material, ensuring long-lasting performance under demanding conditions.
The flat, flexible design is reinforced with spiral layers and polyester threads, providing extra strength and resistance against kinks and blockages.
The smooth inner lining ensures that water flows freely and efficiently through the hose.
Below, you can find the variant that best suits your needs!
STARING’S BLUE PVC HOSES FOR CONTRACTOR PUMPS ARE AVAILABLE IN VARIOUS LENGTHS AND CAN BE SUPPLIED WITH OR WITHOUT A STORZ COUPLING, MAKING THEM A FLEXIBLE AND PRACTICAL CHOICE FOR BOTH PRIVATE AND PROFESSIONAL USE.
Staring offers a wide range of different models and sizes of Storz couplings compatible with our contractor and fire hoses.
These couplings ensure tight and reliable liquid transport without leaks. 1.
Storz Couplings
1. SLEEVE
SLEEVE 2. NIPPLE 3. LONG NECK 4. WRENCH
2. NIPPLE
3. LONG NECK Thread
4. WRENCH
DISPLAY
DEHUMIDIFIERS
S-Series
Professional, reliable dehumidifier supplied with a container and hose. Collected water can be stored in a convenient 7-liter container.
The dehumidifier can be set to start and stop automatically at the specified humidity level.
Features:
• Electronic control with the option to set start and stop times.
• Timer for limited-time operation.
• Option to set operation based on humidity.
• Automatic defrost function.
• However, it is not suitable for use in aggressive environments such as pigsties, etc.
• Easily washable removable air filter.
• Steel casing.
• Foldable handle.
• 7-liter container for water collection.
Example of use:
• Construction
• After flooding in buildings, basements, etc.
• Repairs after water damage.
MODEL
7 L. CONTAINER
DEHUMIDIFIERS
Pro Series
Affugter specifikationer:
• Electronic control with the option to set start-stop.
• Hour counter for initiated jobs.
• Total hour counter.
• Option to set for continuous operation.
• However, does not withstand aggressive environments such as pigsties, etc.
• Easily washable removable air filter.
• Cabinet in impact-resistant plastic.
• Semi-pneumatic wheels.
• Foldable handle (70L).
• Built-in pump that lifts water 4.5m.
• 4.5m plastic hose included.
• Stackable (45L).
Particularly suitable for:
Constructionsite, after flooding in buildings, basements, and repairs after water damage.
AFFUGTERE | IMPACT-RESISTANT PLASTIC
Pro Series
Dehumidifier specifications:
• Electronic control with the option to set start and stop.
• Hour meter for the beginning of a job.
• Total hour meter.
• Option to set for continuous operation.
• However, it does not withstand aggressive environments such as pigsties, etc.
• Easily washable detachable air filter.
• Cabinet in impact-resistant plastic.
• Semi-pneumatic wheels.
• Built-in pump that lifts water 4.5m.
• 4.5m plastic hose included.
• Option to set operation based on humidity.
• Easy-to-clean air filter.
• Quick automatic defrosting.
• Built-in pump that pumps water 4.5m vertically.
Particularly suitable for: Construction, after flooding in buildings, basements, and repairs after water damage.
DEHUMIDIFIERS
DEHUMIDIFIERS SEMIPRO
DYD-Series
Dehumidifier Specifications:
• Electronic control with the option to set start/stop
• High performance
• Simple operation
• Capable of continuous operation, even in harsh environments
• Fast automatic defrosting
• Equipped with transport wheels
• Tank capacity up to 6.3 L
• Option for hose attachment
Highly suitable for:
Construction sites, post-flood building recovery, basements, and water damage repairs.
12L/DAY (30oC RH80%) 8L/DAY (27oC RH60%)
25L/DAY (30oC RH80%) 15L/DAY (27oC RH60%)
50L/DAY (30oC RH80%) 30L/DAY (27oC RH60%)
Blowers VAF-SERIES
The VAF series is perfect for:
• Dust extraction during demolition.
• Air movement for drying in conjunction with a dehumidifier.
• Dust extraction from the ceiling during renovation.
The VAF-Series all have:
• Impact-resistant plastic.
• Double casing.
• Fully enclosed motor casing.
• Large range of accessories.
• Protective grilles on the suctionand blowing sides.
VAF-300
Accessories FOR THE VAF SERIES
1. Flexible hoses 2. Filters 3. Disposable hoses - 100 m. rolls
Distributor Kit (compatible only with VAF-300) 4. Distributor Kit
VAF-KIT 7
1. Flexible hoses
2. Filters
3. Disposable hoses
Filterbox STAC-300
[ STAC-300 ]
Filterbox STAC-300 from Staring is your new best friend on the construction site. It is extremely lightweight and made of practical, impact-resistant white plastic.
You can connect the filter box to your blower with a 305 mm connection hose, creating the perfect system for quick and efficient air purification.
The STAC-300 comes with a connection hose, a HEPA 13 filter, and a pre-filter, making it ready to use upon delivery.
Filterbox features:
• Compatible with VAF-305 flexhose
• Can hold up to 3 filters
• Mounted on the suction side but can also be connected on the blowing side!
The Staring Air Cleaner helps purify the air through filters, thereby improving indoor air quality. Avoid spreading unwanted particles such as mold and asbestos, as well as reduce odor issues associated with mold, moisture, and damage after a fire.
The first stage is a standard paper filter that captures large particles. The next filter is a HEPA 13 filter, classified to capture 99.97% of the remaining particles down to 0.3 microns, effectively collecting most particles. An activated carbon/ potassium permanganate filter can be mounted to absorb odors and gases (optional).
The air cleaner is made of impact-resistant plastic with a molded handle and high performance. It is stackable and can be used both upright and lying down. With its low weight of 16.5 kg, it is easy to transport for most tasks.
The machine has a maximum capacity of 1350 m³/hour but can be adjusted for different tasks using a rotary switch. Flexible hoses can be attached to the suction and exhaust sides, using standard VAF hoses.
A single air cleaner replaces a maximum of 22.5 m³ of air per minute with continuous use.
Aircleaner
ST225 [ STAC-0225 ]
Air Cleaner features:
• Air regulation on rotary knob
• Extra 230V socket for series connection
• Light indicator for filter replacement
• Thermal fuse
• Easy to replace air filter
• Cabinet in impact-resistant plastic
• Option for mounting VAF-305 hoses
• Low weight - only 16.5 kg
• Comes with HEPA 13 filter
• Can be used upright and lying down
• Level of noise 78 dB
Example of use:
• Construction
• Demolition/Cleanup
• Renovation
• Repairs after damage
ADD-ONS VARIOUS FILTERS FOR SPECIFIC PURPOSES
(NOT INCLUDED)
MODEL
ST225 view from blowing side.
Poker Vibrator
RABBIT [ SPV-RABBIT2800 ]
Vibrator specifications:
Staring Poker Vibrator type RABBIT is a super powerful Poker vibrator with a 1 x 230V 3hp motor capacity.
The Rabbit can be supplied with hoses ranging from 1.0 m up to 5.0 m in length and from a diameter of Ø25 mm to Ø60 mm. The vibrator operates at a stunning speed of 12,000 rpm with a centrifugal force of up to
Special fitted hoses. From Ø25 mm to Ø60mm
staring.dk
PLEASE ASK FOR PRICE AND SPECIFICATIONS!
WARNING!
Suction cups from Staring must NOT be exposed to the following during use:
• High heat, such as being mounted for extended periods in direct sunlight.
• Glue, solvents, or other harsh chemicals.
These can reduce suction power and prevent proper release from the object.
Suction Cups
Staring Suction Cups for Demanding Tasks and Heavy Lifting
Whether you’re working with large-format tiles, slabs, or similar materials, having a secure grip is essential. With Staring’s suction cups, you can confidently handle both smooth and rough surfaces.
Our suction cups come in three variants: a basic model, one with a manometer, and an electric, rechargeable version with a built-in battery offering up to 5 hours of operation.
All variants share the same key features: easy operation and a reliable grip, even for heavy lifting tasks!
As an additional noteworthy feature of the STL-205-36, it should be highlighted that it:
• Automatically re-establishes vacuum if it drops during operation!
• Automatically creates a new vacuum when it comes into contact with a new tile/surface!
With a removable dust cover, allowing you to grind right up to the edge.
Concrete Grinder
STC-125-1800
A highly efficient and vibration-dampened concrete grinder. The Staring Concrete Grinder 1800W is a powerful and versatile machine, ideal for edging, chamfering, and leveling uneven surfaces in concrete. The machine is designed with ergonomic parallel handles, offering optimal comfort and control during operation.
With a rotation speed of up to 8,400 RPM and a 125 mm grinding disc, this concrete grinder ensures efficient and precise grinding. The integrated dust extraction port enables effective dust control, creating a cleaner working environment. The grinder is equipped with soft start and variable speed, providing the user full control over the grinding process.
The machine comes with a cup wheel, ready for use right out of the box.
Comes with a cup stone wheel.
Vacuum cleaner connection. MODEL
Staring core drill set available in two variants: one for soft materials and one for reinforced concrete. Both sets include the five most common sizes for plumbing and general construction work.
The core bits produce fewer vibrations, providing greater working comfort.
The core bits are standard dry drills but can also be used wet, which will extend the lifespan of both the drill and the segments.
Core Drill Set
Drill set:
Supplied in an aluminum trolley containing:
• 5 dry core bits in sizes: Ø 32-52-82-112-132 mm
• Center drill bit
• 200 mm extension
• Adapters for SDS connection
Suitable for use on:
• Brick
• Limestone
• Roof tiles
• Sandstone
• Granite
• Hard stones
• Reinforced concrete*
The core bits are 150 mm deep with an M14 thread. For optimal performance and results, it is recommended to use a tool with at least 850W of power. The machine should also be capable of at least 3000 rpm and have variable speed control.
*Applies only to the Work Hard version.
Flapdisc
WET AND DRY GRINDING
Want to optimize your grinding work and achieve professional results with ease? Our flexible flap discs provide a versatile and efficient tool to complete your tasks quickly and precisely.
Why Choose Staring Flap Discs?:
• Precise and Consistent Grinding and polishing
• Perfect for tasks where attention to detail is essential.
• Durable Materials
• Reduces the need for frequent replacements and ensures continuous efficiency.
• Available in 60#, 120#, 200#, and 400# Suitable for everything from rough grinding to fine polishing.
• Universal Compatibility
• Fits most angle grinders and adapts to both small DIY tasks and larger professional projects.
WHETHER YOU’RE A PROFESSIONAL OR A DIY ENTHUSIAST ...OUR FLAP DISCS DELIVER STABILITY AND PRECISION EVERY TIME!
Diamond blades FOR CUTTING
AND GRINDING
Here, you get a game-changer in your hands. This diamond blade from Staring can both cut and grind. With its impact-soldered diamond surface, the blade offers truly unique durability and cutting strength.
The blade is double-sided.
Staring no.
Blade Diameter
125 mm
Drilling 22,23 mm
Suitable for the following materials: Marble Porcelain Natural Stone Ceramic Tiles
STK-D-125-CG
MODEL Multifunctional blade for cutting and grinding.
STK-D-125-CG
Cup Wheel
Staring Cup Wheels in diamond and carbide for rough processing of materials such as natural stone, concrete, and other stone-based building materials. Efficient grinding of uneven surfaces and removal of old coatings such as glue, paint, and epoxy.
Due to their small size and the possibility of mounting them on a traditional angle grinder, they are also ideal for working both horizontally and vertically.
Diamond Cup Wheels can be used for both dry and wet grinding. There is no need for water supply during grinding, but like any other diamond products, the lifespan will be extended with regular cooling.
Dust shields can be mounted on angle grinders with an outlet for a vacuum cleaner hose to minimize the spread of grinding dust during operations.
Suitable for the following tiles and ceramics
Diamond blades
DRY CUTTING [ AR - MU - ECO ]
Staring diamond blades are available with different edges and segment configurations to meet various requirements for materials, strength, and speed. They come with segmented or continuous edges.
There is no need for water during cutting, but like any other diamond products, their lifespan will be extended with regular cooling.
stones
stones
stones
stones
stones
STK ALLROUND DRYseries
Suitable for cuts in Concrete, Bricks, Pavers, and Pavement Tiles
STK MULTIUSE DRYseries
Suitable for cuts in Bricks, Pavers, Pavement Tiles, and Reinforced Concrete
STK ECONOMY DRYseries
Suitable for cuts in Concrete, Tegel, Hard-Burned Tiles, and Porcelain Tiles
Diamond blades
DRY CUTTING [ BREAKDOWN ]
Staring diamond BREAKDOWN blades are crafted as specialized tools for demolition purposes. These blades are sturdy enough to cut through wood, aluminum, lightweight concrete, and roofing felt.
The ”Breakdown” blades are available in sizes 125 mm and 230 mm.
Suitable for the following materiales
Aluminum Lightweight concrete Roofing felt
Diamond blades
DRY CUTTING [ CF - RIL ]
Staring presents a wide range of diamond blades tailored to various material requirements for strength and speed through different edge and segment configurations.
Our blades are available with both segmented and continuous edges, particularly suitable for cutting cement joints and as groove cutters.
Water supply is not necessary during cutting, but as with other diamond products, the lifespan can be significantly extended with regular cooling.
MODEL Cement Joints Cement Joints Groove Cut
Staring no. STK-D-125-CF STK-D-230-CF STK-D-150-RIL
Blade Diameter 125 mm
mm
Hole Diameter 22,3 mm
Suitable for the following tiles and ceramics
Hard joints Mortar joints
Hard joints Mortar joints
STK CEMENTFUGER DRYseries
Suitable for cutting both hard joints and mortar joints.
mm
Bricks Concrete
STK RILLESKÆR DRYseries
Suitable for cutting bricks and concrete.
Diamond blades
DRY CUTTING [ MUPRO - AS ]
Staring introduces a diverse range of diamond blades with various edge and segment configurations to meet diverse requirements for materials, strength, and speed.
Our blades are available with both segmented and continuous edges. Water supply is not required during cutting, but, like other diamond products, the lifespan can be significantly extended through regular cooling.
Enhance your cutting experience with our versatile and efficient selection of diamond blades.
Suitable for the following tiles and ceramics Bricks Paving stones Sidewalk tiles Reinforced concrete Bricks Paving stones Sidewalk tiles Reinforced concrete
STK ASFALT DRYseries
Primarily suitable for cutting asphalt and thin layers of concrete.
STK MULTI USE PRO DRYserien
Primarily suitable for cutting bricks, paving stones, sidewalk tiles, and reinforced concrete.
Suitable for the following tiles and ceramics
Diamond blades
DRY CUTTING [ WH - WF - UNI ]
Staring diamond blades are available with different edges and segment configurations to meet various requirements for materials, strength, and speed.
They come with segmented or continuous edges. There is no need for water supply during cutting, but like any other diamond products, the lifespan will be extended with regular cooling.
STK WORK HARD DRYseries
Suitable for cutting the following tiles: Granite, Rustic, Hard-burned, and Porcelain.
STK WORK FAST DRYseries
Suitable for fast cutting in the following tiles: Granite, Rustic, Hard-burned, and Porcelain
STK UNIVERSAL DRYseries
Suitable for cutting the following tiles: Floor, Wall, and Porcelain
for the following tiles and ceramics
Diamond blades
WET CUTTING [ UNI - SUPER ]
Staring diamond blades are available with different edges and segment configurations to meet various requirements for materials, strength, and speed.
They come with a continuous edge for cutting tiles and bricks on tile cutting machines with water cooling. Should only be used for wet cutting.
STK UNIVERSAL WETseries
Suitable for cutting the following tiles: Floor, Wall, and Porcelain
STK SUPER TOUGH WETseries
Suitable for cutting the following tiles: Granite, Rustic, Hard-burned, and Porcelain
Application:
Small drills can be used with a drill guide or as larger drills with the following method. Start by angling the drill diagonally towards the material to be drilled. Once a pilot groove has been created, straighten the drill, and guide the machine in gentle circular motions.
Diamond Drills
Staring diamond drills for dry cutting in tiles and ceramics. Drills easily through tiles, ceramics, and most other hard-fired materials.
Staring diamond drills can be supplied with a hexagonal (HEX) connection for a regular drill machine and with an M14 internal thread for use on an angle grinder. Additionally, there is an adapter that can convert M14 to HEX, allowing all diamond drills to be used with a drill machine. The diamond drills can be used with both the regular drilling function and the hammer function on the drill machine.
There is no need to add water during drilling, but like all other diamond products, the lifespan will be extended with regular cooling.
SINGLE DRILLS
DRILL SETS
DRILL SETS
The circular motion helps to remove drill dust, making drilling easier and reducing the working temperature. Small drills should be cooled in water after each hole, while larger drills do not require water cooling but can still benefit from it. Always use safety goggles and ear protection during work. ACCESSORIES
Easy Hammer
Effective concrete remover.
Easy Hammer concrete remover is a chemical product designed for the removal of concrete from most surfaces. It does not damage rubber, glass, aluminum, finished painted, or unpainted surfaces.
Easy Hammer concrete remover is an effective and environmentally friendly chemical for the removal of concrete and cement from machinery, tools, and concrete trucks.
USE.
Pre-treatment: The substrate should be dry to ensure the best penetration. ALWAYS test Easy Hammer on a very small area first. Wait and observe the effect before using it on larger or multiple surfaces. Always wash the object afterward with plenty of water and let it dry again to see the final result.
APPLICATION.
Working temperature: min. 5°C - max. 40°C At lower temperatures, the effect is slower. Avoid working in direct sunlight as it shortens the lifespan and reduces effectiveness. Let the concrete remover work until a white layer is left, then rinse with a high-pressure cleaner. Repeat the treatment if necessary.
NOTE: Concrete remover should not be used on marble and other calcareous products.
AREAS OF APPLICATION.
Easy Hammer concrete remover can be used on almost all surfaces except marble and other calcareous products. EASY HAMMER may cause discoloration on the surface of electro-galvanized products. It is essential always to have conducted a small test piece first, regardless of the material.
Gel: Used concentrated. Applied with a spray.
A better workday!
staring.dk
