RFID CONNECTIVITY TIPS AND TRICKS GENERAL INFORMATION • PAIR THE HANDHELD WITH THE CORRESPONDING SLED (MATCHING NUMERICAL STICKERS) • LINE UP THE BACK OF THE HARDWARE DEVICE WITH THE SLED AND TWIST TO THE RIGHT UNTIL IT CLICKS IN PLACE • ENSURE THAT BOTH PIECES ARE POWERED ON • BE PATIENT, THE BLUETOOTH LIGHT ON THE LEFT SIDE OF THE SLED WILL FLASH AS IT PAIRS TO THE MOBILE DEVICE • CLOSING OUT THE CLARITY APP WILL CAUSE THE SLED TO DISCONNECT, THIS IS PART OF THE PROGRAM WIFI CONNECTIVITY • IF THE WIFI DOES NOT CONNECT, CLICK THE GEAR ICON TO OPEN THE SETTINGS SCREEN • TAP THE WIFI OPTION • CONNECT TO ANY AVAILABLE NETWORK THAT YOU HAVE ACCESS TO • ONCE YOU ARE SUCCESSFULLY CONNECTED, REBOOT THE DEVICE • ONCE YOU ARE REBOOTED, CLICK THE SETTINGS ICON, THEN WIFI • SCROLL TO THE BOTTOM OF THE SCREEN TO SELECT SAVED NETWORKS • SELECT ASRFID BLUETOOTH PAIRING • IF THE MOBILE DEVICE DOES NOT PAIR TO THE SLED, CLICK THE GEAR ICON TO OPEN SETTINGS • TAP THE BLUETOOTH OPTION • TAP +PAIR NEW DEVICE • HOLD IN THE BLUETOOTH BUTTON ON THE LEFT SIDE OF THE SCANNER • TAP PAIR ON THE SCREEN • HOLD IN THE TRIGGER ON THE SLED UNTIL THE RFID READER BEEPS BARCODE SCANNER NOT SCANNING • TAP THE SETTINGS OPTION, THEN SELECT BLUETOOTH • ENSURE THAT RFD8500 AND BARCODE ARE LISTED AS A CONNECTED DEVICE • IF YOU DO NOT HAVE BOTH CONNECTIONS SHOWING, TAP THE BLUE CONNECT SYMBOL UNTIL THE SYMBOL TURNS RED
•