Spaldings SPL Ultra Launch Brochure

SPL-Ultra-NewRange-6p

17/12/19

09:22

Page 1

LEADING

PARTS SPECIALIST

HIGH PERFORMANCE WEARING PARTS Unique wearing parts re-designed for longer working life

www.spaldings.co.uk

SPL-Ultra-NewRange-6p

17/12/19

08:34

Page 2

INNOVATION IN THE FIELD

SPALDINGS philosophy of innovation has

been the driving force of our business for over 60 years. Working with our customers and suppliers to offer the best quality, value and service through a comprehensive range of products and replacement parts, direct to UK farmers.

Performance Development Finding better solutions involves identifying where you can make a difference. By listening to our customers experiences we are able to identify crucial earth wearing parts which would benefit from enhanced performance.

Through investment in people and technology, our new SPL Ultra range harnesses the latest engineering technology.

Our approach to enhanced development is founded on detailed analysis of comparative wear patterns in different soil types, comparing OEM parts and other non-genuine wearing parts, leading to design improvements that make a real difference to the life of a part.

Unique wearing parts re-designed for longer working life

Material selection is critical to performance Working with our specialist manufacturers we can choose the perfect combination of production technique and material selection.

Short production runs are used for field trials to ensure each new part adds real value in terms of enhanced performance in work.

Maintaining shape stability for improved efficiency SPL Ultra parts are designed to maintain their original shape so that they work consistently and reliably without compromise, for a long working life.

Competitor subsoil point highlighting destructive soil wear patterns and areas for improvement

Parts that make a difference With SPL Ultra parts you can take advantage of enhanced performance in the field; meaning cultivation operations can be carried out more cost effectively with the benefit of efficient tillage and reduced downtime.

Benefit from: - Material selection and testing to achieve the perfect balance between material toughness and hardness - Quality Tungsten Carbide plates, strategically positioned to prevent change in working length - Additional material and hard facing techniques used to maintain shape and form

SPL-Ultra-NewRange-6p

17/12/19

08:34

Page 3

CULTIVATION PARTS SPLULTRA POINT

SPLULTRA WINGS

Design features:

Design features:

- 40mm thick at nose plus extra 10mm central spine, provides extra wear and bolt protection

- 16mm thick with Tungsten tiles along front edge - Counter-bored fastener positions protect nut/ bolt from wear and reduce risk of wing loss

- Cast in wear deflectors help maintain shape - 3x Tungsten tiled claw front - Wrap-under central Tungsten tile to give extra protection DUE APRIL 2020

To fit HORSCH –

To fit HORSCH – Terrano FG/FX/MT/FM stubble cultivators with MulchMix legs R1483 SPLULTRA wing with Tungsten R.H. As OEM: 34060857-R Requires fasteners: 2 x M12 x 60mm (60082 pk of 10)

Terrano FG/FX/MT/FM stubble cultivators with MulchMix legs R1446 SPLULTRA 80–90mm point, inter-lock type with Tungsten As OEM: 34060850 Requires fasteners: 2 x M12 x 100mm (07602 pk of 10)

R1484 SPLULTRA wing with Tungsten L.H. As OEM: 34060856-L Requires fasteners: SPLULTRA WINGS to fit HORSCH 2 x M12 x 60mm (60082 pk of 10) What our customers say:

”

The longevity and durability of these SPL Ultra wings for the Horsch Terrano was superior to the alternative single piece, or conventional twin piece wings.

The counter-bore for the retaining bolts is an essential feature which reduces the risk of wing loss, whilst maintaining the narrow frontal width which helps to minimize surface heave!

Soil Specialist, Lincolnshire

SUBSOIL PARTS SPLULTRA

Re-designed with additional material and Tungsten tiles for longer life

Design features:

R

WINGS

- Fully fitted with Tungsten tiles along front edge - 22mm raised profile and soil deflectors across the wing face SHIN

- Fully fitted with Tungsten tiles along front edge POINT

- More material at front/underside of point

To fit

FLATLIFT®

–

- Fully fitted with Tungsten tiles along front edge

Leg parts R2154 SPLULTRA heavy duty point with Tungsten fully tiled edge Requires fasteners: 3 x M10 x 35mm roll pin (02334 pk 10)

R2168 SPLULTRA 6" wing R.H. with 4x Tungsten tiled edge Requires fasteners: 2 x 1⁄2" x 40mm HT bolt & nut (09216 pk 10)

R2153 SPLULTRA lower reversible shin with Tungsten Requires fasteners: 2 x M10 x 35mm roll pin (02334 pk 10)

R2169 SPLULTRA 6" wing L.H. with 4x Tungsten tiled edge Requires fasteners: 2 x 1⁄2" x 40mm HT bolt & nut (09216 pk 10)

Visit www.spaldings.co.uk … and search SPLULTRA to access our full range online

SPL-Ultra-NewRange-6p

17/12/19

08:34

Page 4

SUBSOIL PARTS SPLULTRA POINTS

SPLULTRA POINT

Design features:

Design features:

- 6mm side plate protection for legs

- Extra material around bulbous nose (main wearing area)

- 15mm thick wings with 3x Tungsten tiles per wing - Tungsten fitted to point and lower shin - Extra material main body

- Leading point fitted with 2x Tungsten tiles

DUE APRIL 2020

- Each wing fitted with 3x Tungsten tiles - 17mm raised profile soil deflectors across the wing face

To fit CULTIVATING SOLUTIONS/ GRANGE MACHINERY –

DUE APRIL 2020

Rapid Lift/Low Disturbance R2706 SPLULTRA Standard point (120mm wide) with Tungsten As OEM: SP0000004 Requires fasteners: 1 x M10 x 45mm (60075 pk 10) R2708 SPLULTRA intermediate point (165mm wide) with Tungsten As OEM: SP0000019 Requires fasteners: 1 x M10 x 45mm (60075 pk 10)

To fit TWB Subsoiler R2712 SPLULTRA subsoil point with Tungsten to nose and wings (one-piece casting) As OEM: TW10020 – option Requires fasteners: 1 x M16 x 60mm (07584 pk 10)

SPLULTRA WINGS

Design features:

Re-designed with Tungsten tiles and hard facing

- 16mm thick wings fitted with Tungsten tiles - Hard faced on sides of tiled point - Substantially more material along front edge - Deep side plates - Choice of 3" or 5" wings

To fit KEEBLE – Progressive R1359 SPLULTRA rear subsoil point with Tungsten to point and 3" wings (16mm pin fitting) Requires fasteners: 1 x M16 x 60mm roll pin (01314 single) R1360 SPLULTRA rear subsoil point with Tungsten to point and 5" wings (16mm pin fitting) Requires fasteners: 1 x M16 x 60mm roll pin (01314 single)

DUE APRIL 2020

SPLULTRA POINTS to fit KEEBLE

What our customers say:

”

I ran a trial of these SPL Ultra points against standard points. Working at a depth of 18" with the SPL Ultra point set in the area of greatest compaction. It’s durability was impressive, outlasting standard points by more than 4 times.

Farm Contractor, Lincolnshire

Email: agsales@spaldings.co.uk

Call direct from Ireland: 1800 255455 From UK: 01522 507600

SPL-Ultra-NewRange-6p

17/12/19

08:34

Page 5

SUBSOIL PARTS SPLULTRA CAST POINT

Design features: - 4x Tungsten tiles offering full frontal coverage - Fully hard faced underside - 11mm thick side plates - Cast in side plate wear deflectors

To fit SIMBA/GREAT PLAINS – Prolift/Flatliner 500/Solo/DTX R2759 SPLULTRA Heavy duty cast point with Tungsten (to fit Prolift) As OEM: P09148 Requires fastener: 1 x M16 x 50mm roll pin (01522 single)

SPLULTRA POINT to fit SIMBA/GREAT PLAINS

What our customers say: OUTLASTS STANDARD POINTS BY

”

I tried the SPL Ultra points against several other competitors and found that they greatly outlasted all other options.

8

Working at approximately 10" for 200 acres, I have changed the standard points eight times, but the SPL Ultra points are still going strong!

TIMES!

Farm Manager, Lincolnshire Wolds

SPLULTRA POINT

SPLULTRA PENETRATION POINT

SPLULTRA WING

Design features:

Design features:

Design features:

- With 3x Tungsten tiles

- Larger front tile & extra tile on leading edge (4x tiles in total)

- 14mm thick with Tungsten tiles along front edge

- 60mm hard faced sides - Increased material through body and behind point tip

- Extra heavy duty option

- 75mm deep cast body - Extra material behind point - Side plate cast in soil deflectors

To fit SIMBA/GREAT PLAINS – LD Low Disturbance leg on SL/Solo/DTX R4746 SPLULTRA drill coulter/LD type point with 3x Tungsten tiles As OEM: 00310262 – option Requires fasteners: 1 x M10 x 40mm roll pin (02081 single) Email: agsales@spaldings.co.uk

R3018 SPLULTRA penetration point with Tungsten (to fit LD leg) As OEM: P15957 Requires fasteners: 1 x M10 x 30mm roll pin (13244 pk 10)

R4772 SPLULTRA wing with Tungsten edge (to fit LD leg) As OEM: P13812 Requires fasteners: 2 x M12 x 40mm bolt & nut (09249 pk 10)

Call direct from Ireland: 1800 255455 From UK: 01522 507600

SPL-Ultra-NewRange-6p

17/12/19

08:34

Page 6

CULTIVATION PARTS SPLULTRA MARATHON POINT

Design features: - 20mm thick plus extra 10mm central spine - Provides extra wear and bolt protection - Cast in wear deflectors help maintain shape - 3x Tungsten tiled claw front

To fit VÄDERSTAD – Cultus/Opus/Swift/TopDown R1400 SPLULTRA 50mm cast marathon type point (2 hole) with Tungsten As OEM: 498382 Requires fasteners: 2 x M12 x 70mm (11743 pk 10)

SPLULTRA POINT to fit VADERSTAD

What our customers say:

”

We ran a trial of SPL Ultra points against OEM and competitor tungsten points on our TopDown machine. It was noticeable that the soil flow produced by the SPL Ultra was as good as the OEM with a ‘boiling’ effect for efficient trash incorporation. The points also showed outstanding durability, outlasting OEM tungsten equivalents.

R1401 SPLULTRA 80mm cast marathon type point (2 hole) with Tungsten As OEM: 498383 Requires fasteners: 2 x M12 x 70mm (11743 pk 10)

Primary Cultivations Technician, Norfolk

DRILL PARTS SPLULTRA COULTER POINT

SPLULTRA COULTER POINT

Design features:

Design features:

- 16mm thick at nose, fitted with shaped Tungsten tile

- Fitted with 3x Tungsten tiles

- 12mm thick upper body to protect fasteners

- Increased material through body and behind point tip

- 60mm hard faced sides

To fit KUHN/KVERNELAND –

To fit SIMBA/GREAT PLAINS –

Megant, Sola/TS

LD Low Disturbance leg on SL/Solo/DTX

R4775 SPLULTRA heavy duty 45mm straight drill/coulter point with Tungsten As OEM: AC430800N/5331454 Requires fasteners: 1 x M10 x 45mm & 1 x M10 x 50mm (09235 pk 10, 09236 pk 10)

R4746 SPLULTRA drill coulter/LD type point with 3x Tungsten tiles As OEM: 00310262 option Requires fasteners: 1 x M10 x 40mm roll pin (02081 single)

SPLULTRA Heavy duty cast point To fit SIMBA, GREAT PLAINS – Prolift, Flatliner 500, Solo, DTX

visit www.spaldings.co.uk … and search SPLULTRA to access our full range online UK SALES

Call: Free fax: Email:

IRELAND SALES

01522 507600 0800 4715075 agsales@spaldings.co.uk

Call: Free fax: Email:

1800 255455 1800 804018 info@spaldings.ie

*Orders over £99 delivered FREE, with same day despatch on all stock items, (orders before 4pm, mainland UK). Orders below £99 will carry a package and postal charge.

Spaldings par ts are designed and manufactured for Spaldings to exacting quality standards and are supplied to fit machines indicated and are not sold as genuine par ts.

Spaldings reserve the right to change specifications without prior notice.

facebook.com/spaldings.ltd twitter.com/spaldings