Professional Equipment for Arborists & Forestry Workers | Spaldings Groundcare

NEW

RANGE 2024

EXTENSIVE RANGE OF QUALITY ASSURED PRODUCTS

PROFESSIONAL EQUIPMENT FOR

ARBORISTS AND FORESTRY WORKERS SUPPLYING LEADING BRANDS:

Call: 01522 507500

www.spaldings.co.uk

2

Call: 01522 507500 · Email: gcsales@spaldings.co.uk

PERSONAL PROTECTION

NEW

FORESTRY BOOTS WITH CHAINSAW PROTECTION CHAINSAW PROTECTION

CHAINSAW PROTECTION

1 HAIX PROTECTOR PRO 2.0 CHAINSAW BOOTS

2 HAIX PROTECTOR FOREST 2.1 GTX CHAINSAW BOOTS

Focus fully on your work. Your Protector Pro 2.0 Protects you when working in the Forest.

• Upper Material – Waterproof leather, hydrophobic, breathable (4.0 mg/cm²/h), 2.5 – 2.7 mm thick • Cut Protection – Protection against cuts, certified cut level 1 (20m/sec). Compliant with EN ISO 17249:2013 + AC:2014 • Inner Lining – GORE-TEX® Performance; waterproof and breathable. Highly abrasion-resistant lining with fleece mid-layer. Optimized climate comfort for all seasons and excessive use. Increased chemical protection.

• Plastic/Fleece Insole – Moisture absorbent, anti-torsion design for outstanding stability, reducing point pressure (from stones etc.) Foot bed Anatomically formed, exchangeable, washable, very good moisture absorption, dries quickly.

• HAIX® Protective Steel Toe Cap Anatomically formed protective steel toe cap meets the highest safety requirements.

• Protective Throughsole – Flexible, lightweight and puncture resistant metal midsole. Sole Rubber/PU walking sole with proven street/ terrain tread, wear resistant and non-slip traction; large, bevelled contact surface and superior bending comfort. Excellent cold/heat insulation, fuel resistant and nonmarking characteristics. Compliant with EN ISO 20345:2011.

• HAIX® Climate System – The HAIX® Climate system uses the pumping movement produced whilst walking to provide air circulation with every step – moist air is released and fresh air enters through the vent holes at the top of the boot.

• HAIX® CO System – Pressure relief, cushioning, correction of foot position correct posture and muscular balance.

• Sun Reflect – Reduces the heating effect of the upper leather by direct sunlight. Sunlight is reflected by the leather, keeping the feet cooler.

CONFORMS TO: CE 0193 EN ISO 20345:2011 S3 HRO HI CI WR SRC CE EN ISO 17249:2013 + AC:2014 – LEVEL 1 Leather thickness 2.5 – 2.7 mm, Cut Protection Level 1, waterproof and breathable with GORE-TEX® Performance, leg height 23cm, antistatic, sole 020.

RANGE

Your reliable companion in the forest: The Protector Forest 2.1 GTX with Class 2 Cut Protection, keeps your feet safe during all forest work.

ORDERING:

26310 Size 5. 1 Pair.

26311 Size 6. 1 Pair.

26312 Size 7. 1 Pair.

26313 Size 8. 1 Pair.

26314 Size 9. 1 Pair.

26315 Size 10. 1 Pair.

26316 Size 11. 1 Pair.

26317 Size 12. 1 Pair.

26318 Size 13. 1 Pair.

• Upper Material – Suede leather, hydrophobized, breathable, 2.8 – 3.0 mm thick.

• Cut Protection – Class 2 cut protection (24 m/sec).

Conforming to EN ISO 17249:2013.

• Inner Lining – GORE-TEX® Performance; waterproof and breathable. Abrasion-proof lining fabric with fleece inner layer.

• Plastic/Fleece Insole – Moisture absorbent, anti-torsion design for outstanding stability, reducing point pressure from stones etc • HAIX® Protective Cap – Anatomically designed, wide cushioned toe cap.

• Foot Bed – Comfortable, impact-absorbing and moisturewicking. Separate heel cup ensures optimized cushioning and foot guidance.

• Sole – Sturdy and abrasion-resistant, slip-resistant VIBRAM rubber/PU sole with rugged terrain tread. The lightweight PU cushioning guarantees excellent impact absorption and proper toe-to-heel movement. The non-marking outer sole is resistant to heat, fuel-oil. Conforming to EN ISO 20345:2011.

• HAIX® Climate System – The HAIX® Climate system uses the pumping movement produced whilst walking to provide air circulation with every step – warm air is released and fresh air enters through the vent holes at the top of the boot.

• HAIX® 2-Zone Lacing – Two Zone Lacing System enables a separate adjustment of the boot to the foot and leg area GRIP+ Spikes Metal spikes that screw into the shoe sole provide extra grip and prevent slipping on branches and felled tree trunks.

CONFORMS TO: CE 0193 EN ISO 20345: 2011 SB E HRO HI CI WR FO WRU SRC CE EN ISO 17249:2013 + AC:2014 – Level 2 Leather thickness 2.8 – 3.0 mm, breathable and waterproof with GORE-TEX® Performance, cut protection class 2, leg height 22cm, sole 028, KWF Certificate: KWF-PROFI

26319 Size 14. 1 Pair.

CHAINSAW PROTECTION

ORDERING:

26320 Size 5. 1 Pair.

26321 Size 6. 1 Pair.

26322 Size 7. 1 Pair.

26323 Size 8. 1 Pair.

26324 Size 9. 1 Pair.

26325 Size 10. 1 Pair.

26326 Size 11. 1 Pair.

26327 Size 12. 1 Pair.

26328 Size 13. 1 Pair.

26329 Size 14. 1 Pair.

CHAINSAW PROTECTION

3 HAIX PROTECTOR ULTRA 2.0 GTX CHAINSAW BOOTS

4 HAIX TREKKER MOUNTAIN 2.0 CHAINSAW BOOTS

Flexible use: Your Protector Ultra 2.0 GTX with cut and puncture protection.

Professional in the Forest and woods: The Trekker Mountain 2.0 with cut Protection.

• Upper Material – Suede leather, hydrophobized, breathable, 2.8 – 3.0 mm thick Cut Protection Class 2 cut protection (24m/sec). Conforming to EN ISO 17249:2013.

• Inner Lining – GORE-TEX® Performance; waterproof and breathable. Abrasion-proof lining fabric with fleece inner layer. Optimized climate comfort for all seasons even under extreme conditions.

• Plastic/Fleece Insole – Moisture absorbent, anti-torsion design for outstanding stability, reducing pressure from stones etc • Foot Bed – Comfortable, impact-absorbing and moisture wicking. Separate heel cup ensures optimized cushioning and foot guidance.

• Sole – Sturdy VIBRAM rubber/PU sole with rugged profile and abrasion-proof. The lightweight PU cushioning guarantees excellent impact absorption and proper toe-to-heel movement.

The non-marking outer sole is resistant to heat and fuel-oil.

Conforming to EN ISO 20345:2011.

• HAIX® Protective Toe Cap – Anatomically designed, wide cushioned protective toe cap.

• HAIX® Climate System – The HAIX Climate system uses the pumping movement produced whilst walking to provide air circulation with every step – warm air is released and fresh air enters through the vent holes at the top of the boot.

• HAIX® 2-Zone Lacing Two – Zone Lacing System enables separate adjustment of the boot to the foot and leg area CONFORMS TO: CE 0193 EN ISO 20345:2011 S3 HRO HI CI WR SRC CE EN ISO 17249:2013 + AC:2014 - Level 2 Leather thickness 2.8 – 3.0 mm, breathable and waterproof with GORE-TEX® Performance, cut protection class 2, leg height 20cm, sole 028. KWF Certificate: KWF-PROFI

• Upper Material – Oiled nubuck leather, hydrophobic, breathable (7.0 mg/cm²/h), 2.6 – 2.8 mm thick Cut Protection. Protection against cuts certified with cut level 1 (20m/sec). Compliant with EN ISO 17249:2013 + AC:2014.

• Inner Lining – GORE-TEX® Performance; waterproof and breathable. Highly abrasion-resistant lining with fleece mid-layer. Optimized climate comfort for all seasons and excessive use. Increased chemical protection.

• Plastic Insole – Dimensionally stable, torsion-proof, avoids punctual pressure (e.g. from stones).

• Foot bed – Anatomically formed, exchangeable, washable, very good moisture absorption, dries quickly.

• HAIX® Protective Steel Toe Cap – Anatomically formed protective steel toe cap meets the highest safety levels.

• Protective Throughsole – Flexible, metal, lightweight and puncture resistant midsole.

• Sole – Rubber/PU walking sole with proven street/ terrain tread, wear resistant and non-slip traction; large, bevelled contact surface and superior bending comfort. Excellent cold/heat insulation, fuel resistant and non-marking characteristics. Compliant with EN ISO 20345:2011.

• HAIX® Climate System – Uses the pumping movement produced whilst walking to provide air circulation – moist air is released and fresh air enters through vent holes.

• HAIX® CO System – Pressure relief, cushioning, correction of foot position, correct posture and muscular balance.

CONFORMS TO: CE 0193 EN ISO 20345:2011 S3 HRO HI CI WR SRC / CE EN ISO 17249:2013 + AC:2014 - LEVEL1 Leather thickness 2.6 – 2.8 mm, breathable and waterproof with GORE-TEX® Performance, cut protection class 1, leg height 19.5cm, sole 028. KWF Certificate: KWF-PROFI

ORDERING:

26330 Size 6. 1 Pair.

26331 Size 7. 1 Pair.

26332 Size 8. 1 Pair.

26333 Size 9. 1 Pair.

26334 Size 10. 1 Pair.

26335 Size 11. 1 Pair.

26336 Size 12. 1 Pair.

ORDERING:

26354 Size 5. 1 Pair.

26355 Size 6. 1 Pair.

26356 Size 7. 1 Pair.

26357 Size 8. 1 Pair.

26358 Size 9. 1 Pair.

26359 Size 10. 1 Pair.

26360 Size 11. 1 Pair.

26361 Size 12. 1 Pair.

26362 Size 13. 1 Pair.

26363 Size 14. 1 Pair.

SPECIAL ORDERS – Extended range of Arborist Equipment also available – Ask for details!

3

Create an online account for easy ordering at: www.spaldings.co.uk

PERSONAL PROTECTION FORESTRY BOOTS WITH CHAINSAW PROTECTION CHAINSAW PROTECTION

CHAINSAW PROTECTION

5 HAIX PROTECTOR TIMBER CHAINSAW BOOTS

All-round protection and a stylish look, with hydrophobic upper which is lightweight and suitable for all-year round protection from all weathers.

• Upper Material – Velour leather, hydrophobized, breathable, 2.8 – 3.0 mm thick Cut Protection Class 1 cut protection (20 m/sec.). Conforming to EN ISO 17249:2014.

• Inner Lining – GORE-TEX® Performance; waterproof and breathable. Abrasion-proof lining fabric with fleece inner layer.

Optimized climate comfort for all seasons even under extreme conditions. Enhanced protection against chemicals.

• Plastic/Fleece Insole – Moisture absorbent, anti-torsion design for outstanding stability, reducing pressure from stones etc.

• Protective Toe Cap – Anatomically designed, wide cushioned toe cap.

• Foot Bed – Comfortable, impact-absorbing, moisture wicking, anti-bacterial. A separate heel cup ensures optimized cushioning and foot guidance.

• Sole – Sturdy VIBRAM rubber/EVA sole with robust off-road profile and abrasion resistant. The lightweight PU cushioning guarantees excellent impact absorption and proper toe-to-heel movement. The non-marking outer sole is resistant to heat.

Conforming to EN ISO 20345:2011.

• HAIX® Climate System – The HAIX® Climate system uses the pumping movement produced whilst walking to provide air circulation with every footstep – warm air is released and fresh air enters through vent holes at the top of the boot.

CONFORMS TO: CE EN ISO 17249:2014 HRO HI CI WRU WR Leather thickness 2.8 – 3.0 mm, breathable and waterproof with GORE-TEX® Performance, cut protection class 1, leg height 20 cm, sole 051

6 HAIX BLUE MOUNTAIN CHAINSAW BOOTS

Highly rated protective chainsaw boot with superb features.

ORDERING:

26337 Size 6. 1 Pair.

26338 Size 7. 1 Pair.

26339 Size 8. 1 Pair.

26340 Size 9. 1 Pair.

26341 Size 10. 1 Pair.

26342 Size 11. 1 Pair.

26343 Size 12. 1 Pair.

• Made from waterproof, hydrophobic leather • Class 1 cut protection to 20 m/sec to EN 17249:2004 • 4-layer GORE-TEX® laminate provides waterproof protection from the elements while also being highly breathable • The foot bed insole is anatomically formed, exchangeable, washable, very good moisture absorption, and dries quickly • Anatomically formed and well-padded protective toe cap • Highly wear-resistant sole offers excellent grip with oil and gasoline resistance • MSL System for increased impact absorption and isolation • Haix® Climate System provides air circulation with every foot step – moist air is released and fresh air enters through the vent holes CONFORMS TO: EN ISO 17249: 2004 S3 HRO HI CI WR EN 17249: 2004 – Class 1 cut protection

ORDERING:

26344 Size 5. 1 Pair.

26345 Size 6. 1 Pair.

26346 Size 7. 1 Pair.

26347 Size 8. 1 Pair.

26348 Size 9. 1 Pair.

26349 Size 10. 1 Pair.

26350 Size 11. 1 Pair.

26351 Size 12. 1 Pair.

26352 Size 13. 1 Pair.

26353 Size 14. 1 Pair.

SAFETY BOOTS

7 HAIX CLIMBER BLACK LEATHER GORE-TEX® SB SAFETY BOOTS

Your job takes you high up. Your HAIX Climber keeps you safe from the ground up.

A LS O SU PP LI ED : AVAILABLE TO ORDER

ARBORIST CHAINSAW This powerful pro arborist saw provides a 15% better cutting performance and 20% improved fuel consumption compared to its predecessor.

STIHL MS 201 TC-M ARBORIST CHAINSAW

Improves productivity, performance and comfort.

SPECIAL ORDER – please call for details!

Note: A copy of an appropriate chainsaw proficiency certificate or competence certificate must be supplied to enable us to accept your purchase of arborist chainsaws. This is a legal requirement.

• Upper Material – Waterproof leather, hydrophobic, breathable (5,0 mg/cm²/h), 2.5 – 2.7 mm thick.

• Inner Lining – GORE-TEX® Performance: waterproof and breathable. Highly abrasion-resistant lining with fleece mid-layer. Optimized climate comfort for all seasons and excessive use. Increased chemical protection • Non-woven Insole – Dimensionally stable, torsion-proof, avoids punctual pressure (e.g. from stones).

• Foot Bed – Anatomically formed, exchangeable, washable, very good moisture absorption, dries quickly.

• HAIX® Protective Toe Cap – Anatomically formed and wellpadded protective toe cap.

• Sole – Stable rubber/PU sole with a robust terrain tread, wear resistant and non-slip traction. The low-weight PU, impactabsorbing wedge in the heel area cushions every step and affords good bending comfort. The manually-applied rubber sidewall gives this sole optimal side stability. Compliant with EN ISO 20345:2011.

• HAIX® Climate System – The HAIX® Climate system uses the pumping movement produced whilst walking to provide air circulation with every step – warm air is released and fresh air enters through the vent holes at the top of the boot.

• HAIX® FP System – Leather reinforcement over the heel rounding which protects this flexible and soft inset in the bending area from chafing.

• Sun Reflect – Reduces the heating effect of the upper leather by direct sunlight. Sunlight is reflected by the leather, keeping the leather and the feet cooler.

CONFORMS TO: CE EN ISO 20345: 2011 SB E HRO HI CI WRU SRC Leather thickness 2.5 – 2.7 mm, waterproof and breathable with GORE-TEX® Performance, leg height 23 cm, sole VIBRAM.

ORDERING:

26364 Size 5. 1 Pair.

26365 Size 6. 1 Pair.

26366 Size 7. 1 Pair.

26367 Size 8. 1 Pair.

26368 Size 9. 1 Pair.

26369 Size 10. 1 Pair.

26370 Size 11. 1 Pair.

26371 Size 12. 1 Pair.

26372 Size 13. 1 Pair.

26373 Size 14. 1 Pair.

Visit us online – See our range of Replacement Parts, Horticultural Tools and Equipment

4

Call: 01522 507500 · Email: gcsales@spaldings.co.uk

PERSONAL PROTECTION SAFETY BOOTS 1 HAIX BLACK EAGLE SAFETY 50 HIGH, BLACK LEATHER GORE-TEX® S3 SAFETY BOOTS

2 HAIX BLACK EAGLE SAFETY 50 MID, BLACK LEATHER GORE-TEX® S3 SAFETY BOOTS

Full focus on your mission. Your Black Eagle Safety 50 High reduces the feeling of heat.

• Main Material – 1.8 – 2.0 mm strong breathable water reusable leather • Inner Lining – GORE-TEX® Extended, waterproof and highly breathable. Abrasion-resistant lining fabric with good breathability and moisture transfer especially when used indoors and in warm conditions.

• Insole – Comfortable shock-absorbing moisture-wicking, anti-bacterial. Separate heel cup ensures good shock absorption and holds the foot in place. “AIRFLOW” channels.

“Perfect-Fit” entries to find the right size.

• HAIX® Anti Slip – Very good grip thanks to the profile and the special rubber used. Nail penetration protection Flexible, lightweight, metal-free and impenetrable the only insert.

• Outsole – Modern, light sports sole with well-rolling rubber/ PU street and off-road profile. Very wear-resistant and grippy – even in the cold. The lightweight PU damping wedge provides excellent walkability. Very good insulation against cold plus oil and gasoline resistant. Not black.

In accordance with EN ISO 20345:2011.

• ESD – Electrostatically conductive footwear according to the norm EN according to 613404-3:2002.

• HAIX® Composite Toe Guard – Anatomically shaped, extremely light toe protection made of fibre-reinforced plastic, meets the most stringent safety requirements.

• HAIX® Smart Lacing – Footwear easy to use, uncompressed and quick fit to foot, quick lock and lacing pocket.

• HAIX® Vario Wide Fit System – The fit of the footwear grenade can be adjusted individually with three different insoles.

• Sun Reflect – Reduces warming of the main liner from direct sun.

Sunlight is reflected by the leather ensuring the foot is cooler.

CONFORMS TO: CE EN ISO 20345:2011 S3 HRO HI CI WR SRC Leather thickness 1.8 – 2.0 mm, breathable and waterproof with GORE-TEX® Performance, leg height 20cm, anti-static, ESD, sole 019.

You’re on your feet all day. Your Black Eagle Safety 50 Mid gives you comfort.

ORDERING:

26374 Size 5. 1 Pair.

26375 Size 6. 1 Pair.

26376 Size 7. 1 Pair.

26377 Size 8. 1 Pair.

26378 Size 9. 1 Pair.

26379 Size 10. 1 Pair.

26380 Size 11. 1 Pair.

26381 Size 12. 1 Pair.

26382 Size 13. 1 Pair.

26383 Size 14. 1 Pair.

• Upper Material – Waterproof Leather, hydrophobic, breathable, 1.8 – 2.0 mm thick Inner Lining GORE-TEX® Extended; waterproof and highly breathable. Abrasion-resistant lining with optimized climate comfort, especially for alternate inside and outside use.

• Insert – Comfortable, cushioning and moisture repellent.

Separate heel shape for good cushioning and foot insertion.

“AIRFLOW” channels. “Perfect-Fit” mark for an optimal verification of the correct shoe size • HAIX® Anti Slip – Very good grip on different terrains by profile configuration and use of a special rubber.

• HAIX® Protective Sole – Flexible, lightweight, metal-free sole.

• Sole – Modern, light weight and sporty sole construction with rubber/PU street/terrain tread, abrasion-proof, for enhanced toe-to-heel support, ideal for cold weather. The lightweight PU cushioning wedge provides optimum comfort. Excellent thermal insulation. Non-marking outer sole is resistant to heat and fuel-oil.

• HAIX® Composite Toe Cap – Anatomically formed and ultralight protective toe cap made of fibre-reinforced plastic for highest safety requirements.

• ESD – Electrostatically conductive footwear tested according to DIN EN 61340-4-3:2002.

• HAIX® Vario Wide Fit System – The width of the shoe can be individually adjusted by 3 different insoles. The shoe is supplied with a red insole (medium). A yellow insole (wide) and blue insole (narrow) can be ordered separately.

• Sun Reflect – Reduces the heat effect of the upper leather by direct sunlight. Sunlight is reflected keeping feet cooler.

CONFORMS TO: CE EN ISO 20345: 2011 S3 HRO HI CI WR SRC Waterproof leather, waterproof and extremely breathable with GORE-TEX® Extended, leg height 14.5cm, anti-static, ESD, sole 019.

ORDERING:

26384 Size 5. 1 Pair.

26385 Size 6. 1 Pair.

26386 Size 7. 1 Pair.

26387 Size 8. 1 Pair.

26388 Size 9. 1 Pair.

26389 Size 10. 1 Pair.

26390 Size 11. 1 Pair.

26391 Size 12. 1 Pair.

26392 Size 13. 1 Pair.

26393 Size 14. 1 Pair.

3 HAIX GROUNDSMAN XR22 BLACK LEATHER GORE-TEX® S3 SAFETY BOOTS

Your boots for hard work. Your Groundsman Airpower XR22 carries you comfortably through the day.

• Upper Material Test – Waterproof leather, hydrophobized, breathable (5.0 mg/cm²/h), 2.0 – 2.2 mm thick.

• Inner Lining – GORE-TEX® Performance; 4-layer GORE-TEX® Laminate, waterproof and breathable. Abrasion-proof lining fabric with non-woven inner layer. Optimized climate comfort for all seasons even under extreme conditions.

Enhanced protection against chemicals.

• Fleece Insole – Moisture-absorbent fleece insole.

• Foot Bed – For extra foot comfort, impact-absorbing, moisturewicking, anti-bacterial. Separate heel cup ensures optimized cushioning and foot guidance. ‘AIRFLOW’ channels.

• Protective Throughsole – Flexible, lightweight and protective metal throughsole.

• HAIX® Protective Toe Cap – Anatomically formed and ultralight protective toe cap made of fibre-reinforced plastic for highest safety requirements.

• Sole – Anti-slip rubber/PU sole with road/off-road profile, abrasion-proof, for enhanced toe-to-heel support, ideal for cold weather conditions. The lightweight PU cushioning wedge provides optimum wear comfort. Excellent thermal insulation.

The non-marking outer sole is resistant to heat, oil and gasoline.

• HAIX® Climate System – The HAIX® Climate system uses the pumping movement produced whilst walking to provide air circulation with every step – warm air is released and fresh air enters through the vent holes at the top of the boot.

• HAIX® Vario Wide Fit System – The width of the shoe can be individually adjusted by 3 different insoles. The shoe is supplied with a red insole (medium). A yellow insole (wide) and blue insole (narrow) can be ordered separately.

• Sun Reflect – Reduces the heating effect of the upper leather by direct sunlight. Sunlight is reflected by the leather, keeping the leather and the feet cooler.

CONFORMS TO: CE EN ISO 20345:2011 S3 HRO HI CI WR SRC Leather thickness 2.0 – 2.2 mm, breathable and waterproof with GORE-TEX® Performance, leg height 18 cm, anti-static, sole 01.

4 HAIX TREKKER PRO 2.0 BLACK LEATHER GORE-TEX® S3 SAFETY BOOTS

Protected at all times. Your Trekker Pro 2.0 delivers top performance for your safety.

ORDERING:

26404 Size 5. 1 Pair.

26405 Size 6. 1 Pair.

26406 Size 7. 1 Pair.

26407 Size 8. 1 Pair.

26408 Size 9. 1 Pair.

26409 Size 10. 1 Pair.

26410 Size 11. 1 Pair.

26411 Size 12. 1 Pair.

26412 Size 13. 1 Pair.

26413 Size 14. 1 Pair.

• Upper Material – Waterproof leather, hydrophobic, breathable (5,0 mg/cm²/h), 2.5 – 2.7 mm thick.

• Inner Lining – GORE-TEX® Performance; waterproof and breathable. Highly abrasion-resistant lining with fleece midlayer.

Optimized-climate comfort for all seasons and excessive use.

Increased chemical protection.

• Plastic Insole – Dimensionally stable, torsion-proof, avoids punctual pressure (e.g. stones). Foot bed Anatomically formed, exchangeable, washable, good moisture absorption, quick drying.

• HAIX® Protective Steel Toe Cap – Anatomically formed protective steel toe cap meets the highest safety requirements.

• Protective Throughsole – Flexible, lightweight and puncture resistant metal midsole.

• Sole – Rubber/PU sole with proven street/ terrain tread, wear resistant and non-slip traction; large, bevelled contact surface and superior bending comfort. Excellent cold/heat insulation, fuel resistant and non-marking characteristics. Compliant with EN ISO 20345:2011.

• HAIX® Climate System – Uses the pumping movement produced whilst walking to circulate air with every step, warm air is released and fresh air enters through vent holes at the top of the boot.

• Sun Reflect – Reduces heating effect of the upper leather by direct sunlight. Sunlight is reflected keeping the feet cooler.

• HAIX® CO System – Pressure relief, cushioning, correction of foot position correct posture and muscular balance.

CONFORMS TO: CE EN ISO 20345: 2011 S3 HRO HI CI WR SRC Leather thickness 2.5 – 2.7 mm, waterproof and breathable with GORE-TEX® Performance, leg height 17.5 cm, anti-static, sole 020.

ORDERING:

26394 Size 5. 1 Pair.

26395 Size 6. 1 Pair.

26396 Size 7. 1 Pair.

26397 Size 8. 1 Pair.

26398 Size 9. 1 Pair.

26399 Size 10. 1 Pair.

26400 Size 11. 1 Pair.

26401 Size 12. 1 Pair.

26402 Size 13. 1 Pair.

26403 Size 14. 1 Pair.

SPECIAL ORDERS – Extended range of Arborist Equipment also available – Ask for details!

Create an online account for easy ordering at: www.spaldings.co.uk

PERSONAL PROTECTION

NEW

RANGE

HELMET, HELMET ACCESSORIES 6 ARIES TREE HELMET

5 MSA MESH VIZOR V2

MSA V-Gard Mesh Visors provide maximum ventilation in humid working conditions.

Lightweight and durable – great for outdoor applications such as brush clearing and trimming.

Key features: • Wide face coverage • Durable, epoxy-coated 20 x 20 steel mesh • Can be perfectly combined with helmet-mounted ear muffs • Designed for use with V-Gard Frames and V-Gard Headgear 30556 MSA Mesh vizor V2 (10155774).

Main features: • Ergonomic design for great comfort • Designed to guarantee an excellent eyesight in any direction • ABS shell with high impact absorbing capacity, provided with several vent holes assuring an excellent internal ventilation • Accurate head strap adjustment turn-knob, adjustable by the use of one hand • The height of the headband can be adjusted into two different positions • Interior parts in breathable Cordura for great comfort even when used for extended periods of time • Comfortable, washable & replaceable interior padding • Totally replaceable interior regulation system (chinstrap plus head strap) • Robust chinstrap, designed to limit the risk of losing the helmet in case of fall (strength greater than 50 daN) • Provided with head lamp clips and earmuffs quick attachment (e.g. 3M-Peltor, MSA) Helmet compliant with the EN 12492 standard, Conforms to: EN 12492: 2012 developed for mountaineering, tree climbing 30551 Aries Tree Helmet. 53–63cm (6X93107). and mountain rescue services.

7 MSA SORDIN EXC EAR MUFFS for HELMET SNR 26dB

The MSA EXC ear muffs provide extraordinary comfort for the wearer, with a patented spring design that offers low pressure tension and three distinct wearing positions.

• Unique injection moulded inserts provide excellent attenuation and maximum space and comfort for the ears inside the cup • Its excellent grip makes it easy to adjust even when wearing gloves • Can be equipped with a variety of visors Weight . . . . . . . . . . . . . . 218g Attenuation Data: SNR=26dB (H=29dB, M=23dB, L=15dB) NB. Helmet not included.

30555 MSA Ear muffs for helmet, SNR 26dB (10010-S). 1 Pair.

8 MSA SORDIN HPE EAR MUFFS for HELMET SNR 31dB

Superb comfort is assured with the MSA HPE ear muff. This is a high attenuating passive helmet attached ear muff that offers excellent protection in high noise areas.

• A wide padded headband features ventilated padding, while there is also large space to ensure comfort for the ears • Can be equipped with a variety of visors

Suitable for most noise situations

Weight . . . . . . . . . . . . . . 218g Attenuation Data: SNR=31dB (H=29dB, M=23dB, L=15dB) NB. Helmet not included.

30557 MSA Ear muffs for helmet, SNR 31dB (12010-S). 1 Pair.

EMERGENCY TRAUMA PACK

9 SIMARGHU ARBORIST PERSONAL TRAUMA PACK

A LS O SU PP LI ED : AVAILABLE TO ORDER

ARBORIST CHAINSAW With powerful X-Torq® engine for performance, ease of use and safety.

HUSQVARNA T525 X-TORQ ® 27cc TOP HANDLE CHAINSAW Light top handle chainsaw for the pro arborist.

SPECIAL ORDER – please call for details!

Note: A copy of an appropriate chainsaw proficiency certificate or competence certificate must be supplied to enable us to accept your purchase of arborist chainsaws. This is a legal requirement.

The new pack design features a MOLLE System allowing the pack to be easily detached from a climbing harness / pack in the event of an emergency. Designed in conjunction with medical professionals the kit is a musthave particularly for chainsaw users. Designed solely to deal with traumatic bleeding where saving time increases survival chances of the casualty.

Content: 1 x Celox Rapid Haemostatic Z-Fold Gauze The fastest acting haemostatic gauze, stops severe arterial bleeding with only 60 seconds compression.

- Stops severe bleeding – FAST - Rapid action reduces blood loss - Stops hypothermic bleeding as found in severe traumatic injuries 1 x Haemorrhage Control Bandage A multi-functional bandage and trauma wound dressing often known as the ‘Israeli Bandage’, used by Combat and EMS (Emergency Medical Services) globally.

1 x CAT Combat Application Tourniquet (GEN7).

As used by the US Military, the Combat Application Tourniquet® offers true one-handed operation.

30527 Arborist personal trauma pack.

Visit us online – See our range of Replacement Parts, Horticultural Tools and Equipment

5

6

Call: 01522 507500 · Email: gcsales@spaldings.co.uk

CLIMBING & RIGGING

NEW

ASCENDERS & DESCENDERS 30531

RANGE

30533

Right.

Right.

Reverse view.

Equipped with two hooking holes, a cam with anti-tipping system and a secondary hole for connecting a quick mesh for the bracket.

30530

Left.

1 QUICK ROLL ASCENDER INTEGRATED PULLEY

Innovative lift handle with integrated pulley, usable in: Speleology – used in combination with a ventral blocker, it allows the ascent of the rope with MAO technique. Rope work – used in combination with a self-braking descender it allows the ascent of the working rope. Ideal for nailing and clearing cliffs.

Main features: • Ergonomic over-moulded handle, for greater effectiveness of use in traction and greater wear resistance • Cam opening lever can be used with one hand and cam release system activated with a single downward movement (patented) • Steel blocking cam, manufactured to ensure wear resistance • Equipped with teeth that preserve the wear of the rope, but is equally effective in locking and climbing on it • 3x Quarries to prevent the accumulation of mud and reduce the effort required to slide the device up the rope in any condition

EN 567: 2013 Ø 8 –13 mm.

EN 12841: 006-B Ø 10 –13 mm. CE 0333. UIAA 30530 Q/roll left ascender. WLL 140kg (2D663SJ).

30531 Q/roll right ascender. WLL 140kg (2D663DJ).

FOOT ASCENDER

30532

Left.

2 QUICK UP ASCENDERS

Left or right-hand light alloy locking ascender handle with ergonomic rubber grip for climbing ropes.

Main features: • Ergonomic over-moulded handle, for greater effectiveness of use in traction and greater wear resistance • One-handed cam opening lever and cam release system (patented) that is activated with a single downward movement • Steel blocking cam, manufactured to ensure wear resistance • Equipped with teeth that preserve the wear of the rope, but is equally effective in locking and climbing on it • It also has three quarries to prevent the accumulation of mud and reduce the effort required to slide the device up on the rope in any condition (muddy rope, frost etc.)

• Equipped with two hooking holes for various uses, an antitipping system of the cam and a secondary hole for connecting a quick mesh for the bracket.

EN 567: 2013 Ø 8 –13 mm.

EN 12841: 2006-B Ø 10 –13 mm. CE 0333. UIAA 30532 Quick up left ascender. WLL 140kg (2D639SJ).

30533 Quick up right ascender. WLL 140kg (2D639DJ).

3 CHEST ASCENDER EVO

Right ventral lock in light alloy for rope ascents.

Main features: • External profile of the opening lever, which makes the ascent smoother and more efficient • Profile of the opening lever hole, which facilitates its use even with gloves • Design of the lower hole to always keep the device parallel to the user • Cam release system that is activated with a single downward movement (patented) • Steel blocking cam, manufactured to ensure wear resistance • Equipped with teeth that preserve the wear of the rope, but is equally effective in locking and climbing on it • It also has three quarries to prevent the accumulation of mud and reduce the effort required to slide the device up on the rope in any condition (muddy rope, frost etc.)

• Anti-tipping system of the cam

EN 567: 2013 Ø 8 –13 mm.

EN 12841: 2006-B Ø 10 –13 mm. CE 0333. UIAA 30534 Chest ascender evo. WLL 140kg (2D640NJ).

CLIMBING SPIKES

Panther Tree-climbing Spikes consist of 4 main components: Hook, Gaffs, Shell (adjustable universal fitting) and Binding with Velcro straps.

4 QUICK STEP-A FOOT ASCENDERS

Locking for right or left foot that, used in combination with a lift handle or a ventral blocker, facilitates and speeds up the ascent on a rope.

Main features: • Cam / lever mechanism totally integrated into the body • Self-cleaning cam that allows operation even on icy or muddy ropes • Fully adjustable webbing for a correct positioning on the boot • Lower reinforcement with tubular webbing Ideal for work at height and tree climbing, equipped with an opening lever that allows you to keep the device open to facilitate the insertion of the rope and prevent accidental escape.

Rope: Ø 8 –13 mm 30535 Quick Step-A D-right foot ascender (2D654D).

30536 Quick Step-A S-left foot ascender (2D654S).

5 PANTHER TREE-CLIMBING SPIKES – ALUMINIUM

6 PANTHER TREE-CLIMBING SPIKES – CARBON FIBRE

HOOK – ALUMINIUM (main support element): • Manufactured with special heat-treated aluminium alloy to guarantee maximum safety for the user • The hook withstands 650kg without significant deformation GAFFS (2nd support element) cast from alloy steel (Cr, Ni, Mo): • After thread cutting and subsequent heat treatment, the gaffs are tempered to a value of 1000 –1200 MPa • They are screwed to the hook with a pair of M8 screws. These screws are tightened to 25Nm and a layer of glue is applied • The gaffs are shaped so that they allow the Velcro strap to be pulled through the gap • Due to the perpendicular to the base, the grinding angle is 30° SHELL (3rd support element) made of several layers of glass fabric and reinforced with a strip of carbon fabric: • Holes allow support to be adjusted to user needs • The shell is attached to the hook with a pair of M6 screws, The calf support pad, is attached to this shell with Velcro • Shaped longitudinally to provide maximum user comfort

HOOK – CARBON FIBRE (main support element): • Made from Carbon Fibre they offer the perfect combination of strength and ultralight weight. Complete weight (pair): 1500g GAFFS (2nd support element) cast from alloy steel (Cr, Ni, Mo): • After thread cutting and subsequent heat treatment, the gaffs are tempered to a value of 1000 –1200 MPa • They are screwed to the hook with a pair of M8 screws.

Screws are tightened to a value of 25Nm and a layer of glue is applied which prevents spontaneous loosening • The gaffs are shaped so that they allow the Velcro strap to be pulled through the gap • Due to the perpendicular to the base, the grinding angle is 30° SHELL (3rd support element) made of several layers of glass fabric and reinforced with a strip of carbon fabric: • Holes allow support to be adjusted to user needs • The shell is attached to the hook with a pair of M6 screws, The calf support pad is attached to this shell with Velcro • Shaped longitudinally to provide maximum user comfort

30528 Climbing spikes Alu, black, long, velcro. 1 Pair.

30529 Climbing spikes CF, black, med. velcro.1 Pair.

SPECIAL ORDERS – Extended range of Arborist Equipment also available – Ask for details!

7

Create an online account for easy ordering at: www.spaldings.co.uk

CLIMBING & RIGGING KARABINERS & TOOL HOLDERS Maximum working load: 5 kg

7 TRUCK TOOL HOLDER EIRE GATE

Polyamide material karabiner, extremely light & functional.

Main features: • Allows you to comfortably transport and manage the material to the harness (ice screws, rock nails, nuts) allowing easy hooking and unhooking • The curvature of the upper part allows to house the products to select the desired ones ATTENTION – NOT to be used as PPE. Designed only to hang

Size: 112 x 73mm

8 LIGHT ALLOY SNAPPY TG KARABINER 22mm

Galvanised steel oval connector with triplex twist-lock gate, ideal in harsh environments.

Size: 110 x 61mm

9 PILLAR STEEL TG KARABINER 22mm

30545 Truck tool holder eire gate. 5kg load (6V519).

Light alloy HMS karabiner with triplex twist-lock gate, designed for use in traditional climbing, and sports and mountaineering in general.

Main features: • Large aperture and wide radius to facilitate rope slide • Wide inner space allows for multi-purpose use on the belay station and use of a Munter hitch • With catch-free nose for effortless clipping etc Conforms to: EN 12275: 2013-H, EN 362: 2004-B. CE 0333 30546 Snappy TG karabiner 22mm (2C46100YRC).

Particularly suitable for the construction of anchors or for the positioning of large-section devices (e.g. pulleys, ascenders and mobile fall arresters, etc).

Main features: • Symmetrical shape & optimal radius for rope insertion • High strength, which allows the connector to be used as a karabiner for progression • With catch-free closure for effortless clipping etc Conforms to: EN 362: 2004-M 30547 Pillar steel TG karabiner 22mm (3C4460A).

Size: 111 x 62mm

Size: 105 x 73mm

Size: 105 x 73mm

and transport material to the harness. It should never be used to support a person’s weight or to be used in rope manoeuvres.

Any other use is prohibited!

With ACL system to prevent cross loading

10 PILLAR OVAL TG KARABINER 21mm

Light alloy oval-shaped karabiner with triplex twist-lock gate, designed for mountaineering, aid climb, big wall, speleology, and rescue operations.

Main features: • Oval shape for optimal placement of pulleys and blocker • Particularly suitable for use at a standstill and for recovery and rescue manoeuvres • Catch-free closure that avoids accidental entanglement during use Conforms to: EN 12275: 2013-B, EN 362:2004-B. CE 0333 30548 Pillar oval TG karabiner 21mm (2C44600YRC).

11 HMS CONCEPT TG KARABINER 21mm

Hot-forged light alloy HMS karabiner with triplex twist-lock gate, conceived for use in trad and sport climb and mountaineering in general.

Main features: • Especially recommended for use with belay devices • Ample inside space for use with the Munter hitch and for rope manoeuvres on the belay station • Emphasized double T-beam construction for an optimal weight / strength ratio • Light and shaped, for a better grip • With catch-free nose for effortless clipping etc Conforms to: EN 12275: 2013-H, EN 362: 2004-B. CE 0333 30549 HMS TG karabiner 21mm (2C33900XPH).

Size: 120 x 80mm

12 HMS CONCEPT TGL SPRING BAR KARABINER 21mm

Hot forged light alloy HMS karabiner with triplex twist-lock gate, conceived for use in trad climbing, sport climbing and alpinism in general.

Main features: • Especially recommended for use with belay devices • Ample inside space for use with the Munter hitch and for rope manoeuvres on the belay station • Emphasised double T-beam construction, for an optimal weight / strength ratio • Light and shaped, for a better grip • With catch-free nose for effortless clipping etc Conforms to: EN 12275: 2013-H, EN 362: 2004-A/T. CE 0333 30550 HMS TGL karabiner 21mm (2C3390LXPH).

A LS O SU PP LI ED :

DEALER APPROVED FOR

CYLINDER

01 MOWER PARTS ROTARY

02 MOWER PARTS MOWER ENGINE

03 SERVICE PARTS TURFCARE,

VERGE

04 & HEDGE PARTS

SUPPLIED DIRECT

VEHICLE

TRAILER 05 &EQUIPMENT

06 WORKSHOP 07 AIR TOOLS 08 ELECTRIC

TOOLS

09 WELDING

13 XL-D TG KN 28–12–10 GATE 28mm

Light-alloy hot-forged connector with large capacity base and triplex gate, ideal for the connection of multiple devices.

Main features: • Enhanced H-profile – excellent weight-to-strength ratio • Wide gate opening and large internal capacity • With catch-free closure for effortless clipping • Compatible with FIX PRO+ positioning device Conforms to: EN 12275: 2013-B, EN 362: 2004-B. CE 0333 30554 XL-D TG KN 28-12-10 Gate 28mm (2C47900ZPF).

2024 E GROUNDCARNT PARTS, REPLACEME URAL HORTICULT IPMENT TOOLS & EQU COMPLET

HORTICULTUR

11 HAND TOOLS

uk

AL

SMALL PLANT

12 & ACCESSORIES CONTRACTOR

13 ESSENTIALS PERSONAL

14 PROTECTIVE EQUIPMENT HYGIENE

15 & JANITORIAL 16 INDEX

E RANGE

dings.co. www.spal

PAINTS &

10 TREATMENTS

TRIPOD LADDERS Constructed from welded aluminium alloy with a working load of 150 kg.

Stable and virtually wobble-free due to the wide base and adjustable legs with additional comfort provided by double rung steps.

THE ULTIMATE IN STABILITY � LIGHTWEIGHT AND ROBUST SEE our 2024 GROUNDCARE Catalogue!

Visit us online – See our range of Replacement Parts, Horticultural Tools and Equipment

8

Call: 01522 507500 · Email: gcsales@spaldings.co.uk

CLIMBING & RIGGING PULLEYS & SWIVELS

1 ROLL N LOCK MULTI-FUNCTIONAL PULLEY

2 CRIC MULTI-FUNCTIONAL ROPE CLAMP

Ultra-light multi-function device for mountaineering, rope access work, rescue and self-rescue. Compact and easy to handle, it has three different modes of operation: ascender, pulley or progress-capture hauling pulley.

Main features: • The new design and the different colours of the side plates make using it even more intuitive.

• It allows ascending the rope in accordance with EN 567 / EN 12841-B standards (ascender mode).

• With the ability to lock the cam, it can be used as a simple pulley for lifting or transferring a load in accordance with the EN 12278 standard (pulley mode).

• It allows the direct lifting of a load, the creation of hauling systems and the rescue or self-rescue of a person, as in the case of a victim fallen into a crevasse (progress-capture hauling pulley mode).

• When used in pulley mode, the rope is free to run in both directions; instead, when the hauling-pulley mode is used, the rope can only run in one direction and it is locked in the opposite one.

• Switching from one mode to another is intuitive and it can even be done with gloves on or while operating in difficult conditions.

• Its compact size and light weight make it an ideal companion to carry on the harness at all times, for any eventuality.

CAUTION – This equipment is NOT a fall arrester (EN 353-2 / EN 12841-A) – NOR can it be used for self-belaying while climbing.

30541 Roll n lock pulley (2D67500WBR).

Rope clamp with integral pulley for rescue & access work. Robust, practical and intuitive, it has four different operations: ascender, pulley, rope clamp/pulley or progress-capture hauling pulley.

3 ORBITER M COMPACT PULLEY

4 TWISTER 24kN COMPACT BALL BEARING SWIVEL

Pulley with mobile side plates that allow the insertion of any connector.

Main features: • Made in anodized light alloy • Sheaves mounted on self-lubricating bushings • For use with ropes Ø ≤ 13 mm • Designed for hauling systems and deviations Conforms to: EN 12278: 2007. CE 0333. UIAA Working load limit: 5Kn / 2.5Kn Weight: 90g 30543 Orbiter M compact pulley (2P664).

Main features: • Its versatility, size and ease of use allow reducing to the minimum time, material and space needed in rope manoeuvres • Allows ascending the rope in accordance with EN 567 / EN 12841-B standards (ascender mode) • Can be used as a simple pulley for lifting or transferring a load in accordance with EN 12278 standard (pulley mode) • The integrated ball-bearing sheave can be used as a simple redirect to make it easier to ascend a rope or to lift a person without additional connectors (rope clamp / pulley mode) • It allows the direct lifting of a load, the creation of hauling systems and the rescue or self-rescue of a person (progresscapture hauling pulley mode) • When used in pulley mode, the rope is free to run in both directions; when the hauling-pulley mode is used, the rope can only run in one direction and it is locked in the opposite one • When used in progress-capture hauling pulley mode, it is possible to lower the lifted load by acting on the dedicated cord connected to the cam within the device • The easy opening, via an intuitive release button, makes the installation of the device on the rope swift – no matter the mode to be used – even with gloves or operating in difficult conditions • Equipped with a steel cam featuring teeth that minimize rope wear but are effective in locking the rope; the cam is designed with two slots to reduce the build-up of dirt, so maintaining the lock on the rope in any conditions (muddy, frozen rope, etc.)

CAUTION – This equipment is NOT a fall arrester (EN 353-2 / EN 12841-A) NOR can it be used for self-belaying while climbing.

30542 CRIC multi-functional rope clamp (2D674).

Hot forged light alloy swivel, ideal to avoid twisting of the rope during the recovery of a load.

Main features: • Mounted on axial ball bearings that guarantee excellent reliability • Small, compact and with a resistance of 24kN Conforms to: CE 0333. UIAA Minimum breaking load: 24kN Working load limit: 5kN Weight: 80g 30544 Twister 24kN ball bearing swivel (2D793).

THROW BAGS

5 FALCON THROW BAGS

Throwing weights; compact in shape and perfect for manual launch.

Main features: • Equipped with upper ring in metal and lower in webbing • The upper ring is small in size to avoid getting stuck in tree branches • Made of durable fabric 30552 Throw bag 250g (7V793025).

30553 Throw bag 350g (7V793035).

SPECIAL ORDERS – Extended range of Arborist Equipment also available – Ask for details!

9

Create an online account for easy ordering at: www.spaldings.co.uk

CLIMBING & RIGGING

NEW

RANGE

HARNESSES & ACCESSORIES

6 TEUFELBERGER SPARE BRIDGE for treeMOTION STANDARD, 1.23m

The replacement rope bridge approved by TEUFELBERGER for use on the treeMOTION harness is supplied with red stitching approximately 35mm long and close to each end. No other cordage is approved for use as a rope bridge on the treeMOTION harness.

30563 Replacement bridge for treeMOTION Standard, 123cm.

8 TEUFELBERGER treeMOTION ESSENTIAL HARNESS

7 TEUFELBERGER 2 KNOTTED SPARE BRIDGE 10mm

Replacement rope bridges for treeMOTION EVO. Product supplied unknotted.

30582 Replacement bridge for treeMOTION Evo harness 10mm x 123cm.

10 TEUFELBERGER OCEAN POLYESTER e2e GREEN/YELLOW 8mm

The Ocean Polyester e2e is a heat resistant hitch cord with two stitched eyes for climbing in a double-rope configuration. It is also a replacement part for the CElanyard and CEclimb.

8mmØ Conforms to: EN 795B, ANSI Z133, AS/NZS 5532 Min. breaking strength, free length: 1,800 daN 30561 Ocean polyester e2e green/yellow 8mm x 760mm.

30565 Ocean polyester e2e green/yellow 8mm x 850mm.

30567 Ocean polyester e2e green/yellow 8mm x 900mm.

The treeMOTION is our top climbing harness for all arborists. It combines comfort, safety, functionality as well as design and impresses with its quality.

Since 2007 Teufelberger has been constantly improving its treeMOTION harnesses, many years of listening to tree climbers, partners, and ambassadors, always with the sole objective of making the ideal harness that suits all climbing styles and climber anatomies.

9 TEUFELBERGER treeMOTION PRO HARNESS

Conforms to: EN813: 2008, EN358: 2018, ANSI Z133-2017 for arboricultural operations, ASTM F887-20, CSA Z259.1-05, AS/NZS 1891.1:2020 30568 treeMOTION Essential harness. Small (Hip dia: 69–86 cm / 27–33 inch. thigh dia: 38–57 cm / 15–22 inch).

Following the trend is easy, but improving in order to help tree climbers to get more efficient is what Teufelberger commits with its new treeMOTION Pro. • 10 years of life (since the date of manufacture) • Double adjustment waist buckle • More adapted to every morphology • Double bridges optional • Openable side ring for easy replacements of hip/leg connections • 4 Attachment points for suspender/chest • New back and leg paddings • Improved comfort and maximum customization Conforms to: EN813: 2008, EN358: 2018, ANSI Z133-2017 for arboricultural operations, ASTM F887-20, CSA Z259.1-05, AS/NZS 1891.1: 2020 Max. user weight: 150 kg / 330 lbs (incl tools/equipment) 30583 treeMOTION Pro harness. Small (Hip dia: 69–86 cm / 27–33 inch.

Thigh dia: 38–57 cm / 15–22 inch).

30569 treeMOTION Essential harness. Medium (Hip dia: 80–105 cm / 31–41 inch.

Thigh dia: 42–72 cm / 17–28 inch).

30584 treeMOTION Pro harness. Medium (Hip dia: 80–105 cm / 31–41 inch.

Thigh dia: 42–72 cm / 17–28 inch).

30570 treeMOTION Essential harness. Large (Hip dia: 92–129 cm / 36–50 inch.

Thigh dia: 48–87 cm / 19–34 inch).

30585 treeMOTION Pro harness. Large (Hip dia: 92–129 cm / 36–50 inch.

Thigh dia: 48–87 cm / 19–34 inch).

TOOL LINE ACCESSORIES 11 TEUFELBERGER OCEAN POLYESTER e2e GREEN/YELLOW 10mm

The Ocean Polyester e2e is a heat resistant hitch cord with two stitched eyes, for climbing in a double-rope configuration. It is also a replacement part for the CElanyard and CEclimb.

10mmØ Conforms to: EN 795B, EN 566, ANSI Z133, AS/NZS 5532 Min. breaking strength, free length: 2,500 daN 30566 Ocean polyester e2e green/yellow 10mm x 650mm.

Visit us online – See our range of Replacement Parts, Horticultural Tools and Equipment

10

Call: 01522 507500 · Email: gcsales@spaldings.co.uk

CLIMBING & RIGGING

NEW

RANGE

TOOL LINE ACCESSORIES 1 TEUFELBERGER OCEAN POLYESTER LOOP 8mm

The Ocean Polyester Loop is a hitch cord stitched to form an endless sling. Due to its certification, numerous applications are possible. The Ocean Polyester Loop from TEUFELBERGER is the answer to high demands on hitch cords and their different applications in the field of tree care, which makes it a must-have item for all arborists.

Conforms to: EN 795B Min. breaking strength, free length: 2,200 daN 30572 Ocean polyester loop 8mm x 600mm.

3 TEUFELBERGER antiSHOCK CHAINSAW LANYARD

The antiSHOCK Tool Lanyard from TEUFELBERGER is a lanyard for various tools needed in tree care.

What makes this lanyard for tools so special is how it absorbs forces. In the event that more than 220–240 daN act on the lanyard – for example, if your saw gets stuck in a branch you are trying to cut off – the tear webbing will be activated. This reduces the force that acts on the harness, the fall protection system, and the anchor point of the climber to 150–180 daN. Thus, our antiSHOCK Tool Lanyard helps prevent injuries.

Length stretched . . . . . 135cm Response force . . . . . . . 220–240 daN Tear open force . . . . . . . 150–180 daN 30577 AntiSHOCK chainsaw lanyard with ring 73cm.

6 TEUFELBERGER FLIPLINE e2e WHITE/ORANGE 12.5mm

Lanyard with steel wire core. The flipLINE lanyard from TEUFELBERGER features a Hi-Vee cover tightly braided over a steel wire core. The diameter and construction of the flipLINE allow using this rope product in combination with most types of ascenders and mechanic adjusters.

Conforms to: EN354:2010, ANSI Z133-2017 Plait number . . . . . . . . . 16 Min. breaking strength, free length: 2,450 daN CAUTION – The flipLINE is unsuited for use in the vicinity of electrical lines!

30564 FlipLINE e2e white/orange 12.5mm x 310mm.

2 TEUFELBERGER SIRIUS LOOP 10mm

Sirius Loop from TEUFELBERGER is a hitch cord sewn into an endless loop and is certified as a Prusik to ANSI Z133-2012 and offers great abrasion resistance and flexibility.

Conforms to: EN 795B, ANSI Z133 (Prusik) Min. breaking strength, free length: 2,450 daN Cover: polyester. Core: polyester. Braid: 32.

30579 Sirius loop 10mm x 500mm.

30562 Sirius loop 10mm x 700mm.

30558 Sirius loop 10mm x 600mm.

4 TEUFELBERGER pulleySAVER 12mm

Cambium saver with DMM pulley. The pulleySAVER from TEUFELBERGER is a cambium saver with a pulley supplied by DMM. It is the ideal tool for tree care operations. The climbing rope moves on the PINTO pulley with ease. The resilient eye which facilitates the retrieval of the pulleySAVER will return to its original position even after thousands of cycles. The pulleySAVER comes with TEUFELBERGER’s patented [slaice]®.

Attachment as an anchor point on a tree is possible in six different configurations, depending on the intended type of use: as a swinging element in a double leg configuration, as a choke sling, wrapped in a double leg configuration, constricted in a double leg configuration, in a double leg configuration using the Prusik Loop with thimble, and as an equalizing anchor in combination with the equaLIZA.

• Small, lightweight Pinto for easier uninstalment from the ground • Large Pinto pulley is available as a replacement part • Sirius Loop for longer service life • DMM retrieval cone: optimized in technology and appearance • Additional type of use through OD Loop 7mm with thimble and equaLIZA 30571 PulleySAVER 12mm x 2500mm.

5 TEUFELBERGER multiSAVER 12mm

Cambium saver with aluminium rings. The multiSAVER is TEUFELBERGER’s tried and tested cambium saver with aluminium rings, consists of polyester and impresses arborists with its well-thought-out design.

All components of the multiSAVER such as integrated rings, Prusik rope adjuster, and retrieval cone are perfectly compatible with one another. Another of its benefits is that the multiSAVER is length adjustable via the integrated Prusik, ensuring functionality and great ease of use.

• The multiSAVER 2.0 and 2.5 m are supplied with ringLOOP big ring Conforms to: EN 795B, ANSI Z133, AS/NZS 5532 Min. breaking strength . . .1,800 daN 30574 MultiSAVER 12mm x 2.0m 30586 MultiSAVER 12mm x 2.5m.

7 FOREST CAMBIUM SAVER SLINGS

High strength EN 795-B anchor tape, with aluminium rings, particularly suitable for tree climbing work and on construction sites with entry and exit from below to be able to recover the anchorage once you get off the ground and finished the work.

• Made of durable polyamide and high-load polyester • Equipped with two aluminium rings of different dia Conforms to: EN 795: 2012-B Breaking load . . . . . . . . 24 kN Width . . . . . . . . . . . . . . . 28 mm 30537 Saver sling 90cm (7W128090).

30538 Saver sling 150cm (7W128150).

30539 Saver sling 250cm (7W128250).

SPECIAL ORDERS – Extended range of Arborist Equipment also available – Ask for details!

11

Create an online account for easy ordering at: www.spaldings.co.uk

CLIMBING & RIGGING CLIMBING LINE Tachyon is a static rope certified to EN 1891A and featuring unparalleled feel and exceptional performance.

8 TEUFELBERGER spLIFE 1E TACHYON ORANGE / BLUE 11.5mm

Tachyon is the hottest in-trend climbing rope from TEUFELBERGER and certified to EN1891A. This static rope is ideal for use in combination with standard hardware developed for 11.5 mm ropes. This climbing rope consists of a firm and flexible 24-strand structure.

Its polyester cover significantly improves friction hitch performance without ‘bagginess’. Its polyamide core features a core-in-core structure that stays constant under load.

• Low stretch at low loads for less bounce while climbing • High stretch at high loads to minimize impact in the event of a fall • Consistent dia. while climbing ensures improved grip • Easy to splice Conforms to: EN 1891A Core . . . . . . . . . . . . . . . . . . polyamide Cover . . . . . . . . . . . . . . . . . polyester Plait number . . . . . . . . . . . 24 Version . . . . . . . . . . . . . . . . With [spLIFE] Min. breaking strength . . 1,800 daN 30576 SpLIFE 1E Tachyon, orange/blue, 11.5 mm x 35m.

9 TEUFELBERGER spLIFE 1E TACHYON GREEN / BLUE 11.5mm

Tachyon is the hottest in-trend climbing rope from TEUFELBERGER and certified to EN1891A. This static rope is ideal for use in combination with standard hardware developed for 11.5 mm ropes. This climbing rope consists of a firm and flexible 24-strand structure.

Its polyester cover significantly improves friction hitch performance without ‘bagginess’. Its polyamide core features a core-in-core structure that stays constant under load.

• Low stretch at low loads for less bounce while climbing • High stretch at high loads to minimize impact in the event of a fall • Consistent dia. while climbing ensures improved grip • Easy to splice Conforms to: EN 1891A Core . . . . . . . . . . . . . . . . . . polyamide Cover . . . . . . . . . . . . . . . . . polyester Braid . . . . . . . . . . . . . . . . . . 24 Version . . . . . . . . . . . . . . . . With [spLIFE] Min. breaking strength . . 1,800 daN 30573 SpLIFE 1E Tachyon, green/blue, 11.5mm x 35m.

10 TEUFELBERGER spLIFE 1E TACHYON ASH 11.5mm

Tachyon is one of the most successful climbing rope from TEUFELBERGER and certified to EN1891A. This static rope is ideal for use in combination with standard hardware developed for 11.5 mm ropes. This climbing rope consists of a firm and flexible 24-strand structure.

Its polyester cover significantly improves friction hitch performance without ‘bagginess’. Its polyamide core features a core-in-core structure that stays constant under load.

• Low stretch at low loads for less bounce while climbing • High stretch at high loads to minimize impact in the event of a fall • Consistent dia. while climbing ensures improved grip • Easy to splice Conforms to: EN 1891A Core . . . . . . . . . . . . . . . . . . polyamide Cover . . . . . . . . . . . . . . . . . polyester Plait number . . . . . . . . . . . 24 Version . . . . . . . . . . . . . . . . With [spLIFE] Min. breaking strength . . 1,800 daN 30580 SpLIFE 1E Tachyon, ash, 11.5mm x 35m.

30578 SpLIFE 1E Tachyon, orange/blue, 11.5mm x 45m.

RIGGING LINE

11 TEUFELBERGER spLIFE 1E DRENALINE, BLUE/ORANGE/YELLOW 11.8mm

Super versatile climbing rope. One rope equally efficient! Our drenaLINE gives ultimate freedom to the climber to choose the right technique for the task. Either on single or double rope configurations, this rope gives ultimate freedom to the climber to choose the right technique for the task. 11.8mm [spLIFE] able drenaLINE works perfectly and reliably in both applications. Its extremely light construction and 32 strand cover allows super smooth precision during ascents and descents.

Conforms to: EN 1891A, ANSI Z133 Min. breaking strength, free length. 3,500 daN Min. breaking strength, [spLIFE] . . . 2,000 daN Min. breaking strength with figure 8 knot. . . . . . . . . . . . . . . 1,800 daN Cover . . . . . . . . . . . . . . . . . . . . . . . . . . Polyester Core . . . . . . . . . . . . . . . . . . . . . . . . . . . Nylon Plait number: . . . . . . . . . . . . . . . . . . . . 32 30559 SpLIFE 1E drenaLINE, blue/orange/yellow 11.8mm x 45m.

12 TEUFELBERGER SIRIUS BULL ROPE RED / WHITE 12mm

Rigging line. The Sirius Bull Rope from TEUFELBERGER is a double braid for rigging applications, which has been a must-have item for tree care and arborists for many years.

• Easy to knot • Easy to handle • Very good price/performance ratio • Colour-coded diameter Conforms to: Machinery Directive 2006 / 42 / EC Core . . . . . . . . . . . . . . . . . . . polyester Cover . . . . . . . . . . . . . . . . . . polyester Plait number . . . . . . . . . . . . 32 Min. breaking strength . . . 3,500 daN 30575 Sirius bull rope, red/white 12mm x 50m.

13 TEUFELBERGER SIRIUS BULL ROPE YELLOW / WHITE 16mm

Rigging line. The Sirius Bull Rope from TEUFELBERGER is a double braid for rigging applications, which has been a must-have item for tree care and arborists for many years.

• Easy to handle • Easy to knot • Very good price/performance ratio • Colour-coded diameter Standard: Machinery Directive 2006 / 42 / EC Core . . . . . . . . . . . . . . . . . . . polyester Cover . . . . . . . . . . . . . . . . . . polyester Plait number . . . . . . . . . . . . 32 Min. breaking strength . . . 6,300 daN 30581 Sirius bull rope, yellow/white 16mm x 50m.

Visit us online – See our range of Replacement Parts, Horticultural Tools and Equipment

12

Call: 01522 507500 · Email: gcsales@spaldings.co.uk

PRUNING LOPPERS 1 CORONA HIGH-PERFORMANCE 26" ORCHARD LOPPER

Cutting capacity:

2 ¼"

• Dual Arc™ blade design dramatically reduces cutting effort • Lightweight, high-strength elliptical 26” aluminium handles • Resharpenable, replaceable, Dual Arc bypass blade manufactured with fully heat-treated forged steel • Forged, slant-ground hook with selfcleaning, deep sap groove • Shock absorbing system with dual elastomer bumpers • New and improved locking nut eliminates nut-retaining clip 30507 Orchard bypass lopper, 26” (AL8442).

2 CORONA HIGH-PERFORMANCE 32" ORCHARD LOPPER

Cutting capacity:

2 ¼"

• Dual Arc™ blade design dramatically reduces cutting effort • Lightweight, high-strength elliptical 26” aluminium handles • Resharpenable, replaceable, Dual Arc bypass blade manufactured with fully heat-treated forged steel • Forged, slant-ground hook with selfcleaning, deep sap groove • Shock absorbing system with dual elastomer bumpers • New and improved locking nut eliminates nut-retaining clip 30508 Orchard bypass lopper, 32” (AL8462).

Cutting capacity:

1 ½"

3 CORONA 24" BYPASS PRUNER LOPPER

• Bypass lopper designed for maximum precision, efficiency and comfort in use • Resharpenable, precision-ground high-carbon steel blades • Shock Stop bumper to reduce fatigue • Tubular steel handles with cushioned non-slip grips 30509 Bypass pruner lopper, 24” (SL3310).

Cutting capacity:

1 ½"

The Corona DualLINK™ Bypass Lopper is the cutting tool that professionals use day in and day out.

MaxFORGED steel with a powercompounding link feature means that these loppers go the distance to achieve professional results.

Cutting capacity:

4 CORONA 29” BYPASS PRUNER LOPPER

2"

• Resharpenable, carbon steel bypass blade • Lightweight, high-strength aluminium handles with non-slip grips • Self-aligning pivot bolt • Shock Stop® bumper 30510 Bypass Lopper, aluminium handles, 29” (SL4150).

Cutting capacity:

5 CORONA 32" SUPER-DUTY BYPASS LOPPER

• Corona’s largest-capacity heavy duty loppers • Resharpenable, self-cleaning forged steel blades • Precision-made, self-aligning pivot bolt • Fatigue reducing spring-loaded bumper system • Steel Handles with comfortable grips 30511 Super-Duty bypass lopper, 32” (SL6500).

3"

6 CORONA 31" DualLINK BYPASS LOPPER

• Limb and Branch Lopper with a MaxFORGED steel blade for sharpness and durability • Boosted power and reduced effort unite through DualLINK™ tools with its power-compounding lever for ease-of-cut • Comfortable handle with contoured soft grip, fits various hand sizes • Easy to resharpen • Less fatigue with ShockGUARD® bumper system • No-fail metal end cap 30512 DualLINK bypass lopper, 31” (SL8180D).

SPECIAL ORDERS – Extended range of Arborist Equipment also available – Ask for details!

13

Create an online account for easy ordering at: www.spaldings.co.uk

PRUNING

NEW

RANGE

PRUNING SHEARS

7 CORONA ClassicCUT BYPASS PRUNER – ¾"

MaxForged ALUMINIUM Bypass pruner with ergonomically angled head for less bending of the wrist.

Bypass action allows for close, cleaner and healthier cuts.

Cutting capacity:

1"

8 CORONA ALUMINIUM BYPASS PRUNER – 1"

• Lightweight forged aluminium handles with non-slip grips • High-carbon steel blades for lasting performance • Easy access to tight areas with narrow profile hook • Geared pivot nuts permit precise blade adjustments • Built-in wire cutters and sap grooves • Rubber bumpers absorb shocks 30502 Aluminium bypass pruner, 1” (BP4250).

L For Large hands

The Corona MaxFORGED ClassicCUT® Pruners are crafted out of forged steel for the professional gardener. Their strength and durability means everyday use isn’t a problem. If you need to get job done day in and day out, you can depend on these pruners.

• Resharpenable high-carbon steel blades • High-precision pivot bolts and locking nuts keep blades and hooks aligned • Fully forged steel construction for maximum strength • Non-slip grips for greater control 30500 ClassicCUT bypass pruner, ¾” (BP3160).

9 CORONA ClassicCUT BYPASS PRUNER – 1"

The Corona MaxFORGED ClassicCUT® Pruners are crafted out of forged steel for the professional gardener. Their strength and durability means everyday use isn’t a problem. If you need to get job done day in and day out, you can depend on these pruners.

• Resharpenable high-carbon steel blades • High-precision pivot bolts and locking nuts keep blades and hooks aligned • Fully forged steel construction for maximum strength • Non-slip grips for greater control 30501 ClassicCUT bypass pruner, 1” (BP3180D).

Universal design fits most hand pruners and folding saws up to 8".

10 CORONA 5” LEATHER SCABBARD

• Top-grain leather construction • Stitched and riveted for durability • Belt clip and loops included 30503 Scabbard, 5" (AC7220).

11 CORONA LONG STRAIGHT SNIPS

• Long, straight, pointed blade for a wide range of applications • Fully heat-treated steel blades for strength • Blades, spring and handle coated to prevent rust • Unobtrusive leather strap lock 30515 Long straight snips, 1 ¾” blades (AG4930).

12 CORONA SHARPENING TOOL

• 5” Super carbide file • Ideal for sharpening all straight blades (excludes saw blades) • Easy to fit in pocket or scabbard • Non-slip grip for easy use 30516 Sharpening tool (AC 8300).

Visit us online – See our range of Replacement Parts, Horticultural Tools and Equipment

Cutting capacity:

¾"

M For Medium hands

Cutting capacity:

1"

L For Large hands

14

Call: 01522 507500 · Email: gcsales@spaldings.co.uk

PRUNING

NEW

LONG REACH PRUNING

RANGE

FOLDING SAW

Tempered steel tripleground saw blade

UP TO

12 ft

30505

30506

UP TO

14 ft

The Corona Folding RazorTOOTH saw is extremely fast and efficient.

CUTS small to medium branches up to 4” diameter

Cutting capacity:

4"

Twist-lock handle length adjustment

2 CORONA FOLDING RazorTOOTH PRUNING SAW

Extremely fast and efficient cutting

Each RazorTOOTH Saw blade goes through 4 manufacturing processes for maximum durability, hardness and friction reduction.

• Ergonomic comfortable grip 30504 Folding pruning saw, 10” blade (RS7265D).

HIGH QUALITY SAW AND PRUNER WITH EXTENDABLE WORKING LENGTH

RAKES 3 CORONA FIXED SPRING TINE 8" SHRUB RAKE

• Tempered spring steel for greater durability and long service life • Bi-curved bows give even pressure to all tines for maximum raking efficiency • Tines apply light pressure for debris removal without damage to plant feeder roots • Narrow head for working between closely spaced plants • 2 Rivets secure head to handle • Double crimps hold tines in place • 54” Lightweight alu handle with anti-slip grip 30514 Shrub rake, aluminium handle, 8” width, 11 tines (RK62060).

8"

WIDTH

PACK OF

1 CORONA DualLINK™ TREE SAW AND PRUNER KITS

The Corona DualLINK™ Tree Saw and compound action pruner with rope drive can access all the hardto-reach places. With 3x Power Multiplier linkage and a non-stick blade, it makes for easy trimming up to 12ft or 14 ft.

• Pruning head with DualLINK™ and non-stick blade for cuts up to 1" • Overall length extends with twist-lock adjustment • Tempered steel triple-ground saw blade 30505 Tree saw and pruner, 12 ft (TP4212).

30506 Tree saw and pruner, 14 ft (TP4214).

3

4 CORONA BigLOAD 30" POLY LEAF RAKE

Get the leaves raked and move on to your next project with the Corona BigLOAD™ Leaf Rake.

• Oversize head rakes up to 2x faster than standard leaf rakes • Unique head design maximizes load capacity • 30" poly head is both lightweight and durable • 60" aluminium handle with anti-slip vinyl grip for gripping comfort in extreme heat or cold 30513 BigLOAD leaf rake, 30” width, 30 tines (RK45030). Pack of 3.

SPECIAL ORDERS – Extended range of Arborist Equipment also available – Ask for details!

30 " WIDTH Supplied as a Pack of 3 (cannot be sold individually)

15

Create an online account for easy ordering at: www.spaldings.co.uk

CUTTING, SHARPENING AXES & SPLITTING

Head weight: 3kg.

Shaft length: 88cm

Head weight: 2.5kg.

Length: 78cm

5 MÜLLER DROP FORGED SPLITTING MAUL

6 MÜLLER DYNAM-AX DYNAMIC SPLITTING AXE

The ideal tool for wood splitting, and also for driving in plastic, aluminium or wooden felling wedges.

• Compact and easy to handle with a 3kg head weight for efficient use • High-quality straight ash handle 30518 Log splitting maul, 3kg (0267,30).

• Splitting axe with expansion wedge for extra high splitting effect • Articulated and therefore you don’t get any recoil • Ideal for protecting the joints • Hand forged with straight handle made of hickory 30520 Dynam-AX splitting axe (0275,25).

Length: 43cm.

Weight: 0.7kg

7 MÜLLER BILL HOOK with LEATHER GRIP

Traditional cutting tool which sees widespread use in both forestry, agricultural and horticultural settings.

• Heavy duty blade forged from one piece, with finely polished cutting edge • Stacked leather handle, riveted for secure grip • Effective tool for clearing woody material, shrubs and branches 30519 Bill hook (0670,01).

Length: 350mm Weight: 1kg

8 MÜLLER ALUMINIUM WEDGE with WOOD & RING

• Aluminium log wedge 1 kg completed with wood and ring handle end • 3-piece wooden log wedge made of aluminium • Ideal for felling and splitting – Extra light and robust • With the help of the log wedge, hitting on metal is avoided 30517 Aluminium wedge with wood & ring (0301,01).

CHAINSAW SHARPENING CHOOSE THE BEST!

9 VALLORBE ROUND CHAINSAW FILES

Vallorbe are a world leader in precision files, and files for sharpening chainsaws, with over one hundred years of technical expertise dating back to 1899.

• Designed with professionals in mind – top-quality, high-performance, durable tools • Round files: 8”/200mm long 30521 Round file 3⁄16” – 4.8mm (LC10000-03-316). Pack of 12.

30522 Round file 7⁄32” – 5.50mm (LC10000-03-732). Pack of 12.

30523 Round file 5⁄32” – 4mm (LC10000-03-532). Pack of 12.

30524 Round file 13⁄64” – 5.2mm (LC10000-03-1364). Pack of 12.

30525 Round file ⅛” – 3.2mm (LC10000-03-18). Pack of 12.

10 VALLORBE STUMP VICE & POUCH

• Durable cast steel design with galvanized screw • Once in the wood it stays steady while sharpening – with NO vibration • Easy to insert and remove • Light and small, easy to use and carry (includes pouch) 30526 Stump vice with belt pouch (LC7051-115-30).

AVAILABLE DIRECT FROM STOCK

SILKY SAWS

A LS O SU PP LI ED :

HIGH QUALITY TELESCOPIC POLE SAWS � PLUS FIXED AND FOLDING PRUNING SAWS

SEE our 2024 GROUNDCARE Catalogue

Visit us online – See our range of Replacement Parts, Horticultural Tools and Equipment

Discover more online…

SEE OUR EXTENSIVE RANGE FOR GROUNDS MAINTENANCE CONTRACTORS

www.spaldings.co.uk Easy access to our entire range of Replacement Parts, Horticultural Tools and Workshop Equipment

WD-40

facebook.com/spaldings.ltd

CONTACT

Call: Free fax:

01522 507500 0800 4715019

twitter.com/spaldings

Email: gcsales@spaldings.co.uk Web: www.spaldings.co.uk

Orders over £150 will be delivered FREE to mainland UK only. Orders below £150 will carry a package and postal charge.

The products in this new Arborist range are delivered direct from our supplier via drop shipment to Mainland UK addresses ONLY and are NOT AVAILABLE in the Republic of Ireland and Northern Ireland.

Spaldings reserve the right to change specifications without prior notice.