Spaldings GYS Welders Product Brochure

NEW RANGE WELDERS AND, PLASMA CUTTERS

MIG WELDERS

ARC WELDERS

ARC WELDERS – LIGHTWEIGHT & PORTABLE

INVERTER PERFORMANCE DC arc welding inverters massively out perform conventional arc welding transformers.

• Greater duty cycle – improved welding • Weld larger rods from a 13 amp supply • Weld easily without blowing fuses • Lightweight and portable

NEW

GYSMI 200P

GYSMI E163

Portable and compact 200 amp arc welding inverter, weighing just 5kg. Capable of welding 3.2mm rods from a 13 amp supply. Features revolutionary arc dynamic, can be used with all types of electrodes: rutile, basic, stainless steel, cast iron in direct current.

TIG capable (scratch start), requires optional TIG torch (17110).

Compact and portable 160 amp arc welding inverter capable of welding 3.2mm rods from a 13 amp supply.

Requires 16 amp supply for 4mm rods. TIG capable (Lift start and auto downslope).

200 Amp DC Arc Welding Inverter

MMA FEATURES: • Immediate start thanks to very high no-load voltage • Constant welding power – Very smooth welding due to the direct current • Not sensitive to supply current fluctuations or to the arc length • Very good penetration and perfect arc stability • Suitable for use with voltage stable output generators (min. 7.5Kva) HOT START: Increased power at start.

ANTI-STICKING: Prevents the electrode sticking.

ARC FORCE: Instantaneous increase of the current in difficult welding situation.

17855 200 amp arc welding inverter (GYSMI 200P) c/w electrode holder, earth clamp with 1.6m cables and plastic carry case.

NEW GYS SR17 TIG Torch Compatible with GYSMI E163, GYSMI 200P and MULTIPEARL 210-2 (overleaf).

17110 SR17 TIG torch c/w valve (for 17855, 17916, 17190).

160 Amp DC Arc Welding Inverter

SPECIFICATION Approval . . . . . . . CE to EN 60974-1.

Supply . . . . . . . . . Single phase

230 volts (±15%).

Fuse rating. . . . . . 16 amps.

Welding range. . . 60% duty cycle

at 120 amps.

Welding current . 10–200 amps.

Dimensions. . . . . L270 x W140

x H180mm.

Weight. . . . . . . . . 5.0kg.

• Built-in electrode hot start and anti-stick function for smooth, easy operation • Precision digital amperage adjustment • MMA Pulse for pipe welding and vertical welding • Versatile power source for MMA welding with coated electrodes • Suitable for use with voltage stable output generators (min. 7.5Kva) • TIG capable – requires optional TIG torch (17110) 17916 160 amp arc welding inverter (GYSMI E163) c/w electrode holder and earth clamp with 1.6m cables and plastic carry case.

+

WELDERS (17855, 17916) SUPPLIED WITH:

ACCESSORIES, SPARES

TIG Electrodes Multi-strike electrodes, for DC & AC/DC. 17111 1.6mm Multi-strike WL15 gold. Pack of 10.

17112 2.0mm Multi-strike WL15 gold. Pack of 10.

17113 2.4mm Multi-strike WL15 gold. Pack of 10.

Call: 01522 507600 � Email: agsales@spaldings.co.uk � Web: www.spaldings.co.uk

SPECIFICATION Supply . . . . . . . . . . Single phase

230 volts (±10%).

Fuse rating. . . . . . . 16 amps.

Welding range. . . . 60% duty cycle

at 90 amps.

Welding current . . 10 –160 amps Dimensions. . . . . . L250 x W134

x H190 mm.

Weight. . . . . . . . . . 4.6 kg.

All GYS welding and cutting machines are supplied with a 24 month manufacturers’ warranty

24 MONTH

MIG / ARC MULTI-PROCESS WELDERS

VERSATILE MULTI-PROCESS PRECISION WELDERS

NEW

NEW

GYS MULTIWELD 320T

GYS MULTIPEARL 210-2

The MULTIWELD 320T is a semi-automatic 3-phase welding machine, combining MIG/MAG, cored wire and MMA welding processes. Its intuitive interface integrates digital displays for easy and precise adjustment. Fitted with a powerful and precise 4-drive roller feeding system, with optional rollers for Ø 1.2mm wire also available.

MULTI-PROCESS MIG/MAG welding: - steel wire: Ø 0.6 to 1.2 mm - stainless steel wire: Ø 0.8 to 1.2 mm - aluminium wire: Ø 0.8 and 1.0 mm - cored wire (reverse polarity): Ø 1.9 to 1.2 mm MMA welding - basic and rutile electrodes (up to Ø 6 mm).

OPTIMISED MIG/MAG SETTINGS - Choice of the trigger mode: 2T or 4T. - Welding guide: tables assist the user to adjust and fine tune the voltage and the diameter of filler wire according to thickness of material being welded.

INTEGRATED WIRE FEEDER - Compatible with reels: 5kg / 15kg.

- Wire feeder with 4 rollers for efficient wire feeding.

3-in-1, the MULTIPEARL 210-2, is a multi-process power source capable of performing MIG/MAG, TIG DC and MMA welding with high precision. It features 9 welding synergies to enable welding in all positions.

Versatile, but also equipped with a single-phase power supply with PFC/FV technology, it is the perfect tool in the workshop or on site.

3 WELDING PROCESSES MIG-MAG - 2 roller motor: 5kg and 15kg reels.

- Adjustable manually or synergistically.

- SPOT and DELAY functions available.

- Can weld sheets from 0.6 to 6 mm thick.

TIG - TIG DC welding and TIG Lift ignition with optional TIG EURO torch.

- Adjustable Post Gas & Downslope (arc downslope).

MMA - Welds different types of coated electrodes up to ø 5mm (rutile, basic, stainless steel, steel, cast iron).

- Adjustable Hot Start (0 to 100%): facilitates ignition and can be adjusted.

- Arc Force adjustable (0 to 100%): regulates the arc length deviations.

- Anti-sticking: reduces the risks of electrode stick MIG-MAG SYNERGIES Automatic calculation of wire speed and voltage according to: - type & diameter of wire; - thickness to be welded; - the gas used; - the welding position.

Manual setting possible: - wire speed and arc length.

3-Phase 320 Amp MIG / ARC Welder

17195 MULTIWELD 320T (3 phase) MIG/ARC welder c/w 4m MIG torch (MB36).

17196 300A Electrode holder with 4m cable (for 17195).

Single Phase 200 Amp Inverter / MIG Welder

SPECIFICATION Approval . . . . . . . . CE to EN 60974-1.

Supply . . . . . . . . . . 3 phase 400 volts (+/-15%).

Fuse rating. . . . . . . 16 amps.

Welding range. . . . 40–320 amps.

Duty cycle (MIG). . 60% @ 240 amps.

Welding wire size . 0.6–1.2 mm.

Reel size Ø. . . . . . . 200mm (5kg),

300mm (15kg).

Dimensions. . . . . . L770 x W470

x H790mm.

Weight. . . . . . . . . . 44kg.

SPECIFICATION Approval . . . . . . . . CE to EN 60974-1.

Supply . . . . . . . . . . Single phase 110V

or 230V (+/-15%

generator friendly

9kVA).

Fuse rating . . . . . . . PFC technology

enables full range

from 13A supply.

Welding range. . . . 20–200 amps.

Duty cycle (MIG). . 60% @ 130 amps.

Welding wire size . 0.6–0.8 mm.

Reel size. . . . . . . . . 1kg & 5kg.

Dimensions. . . . . . L450 x W250

x H350mm.

Weight. . . . . . . . . . 16kg.

17190 MULTIPEARL 210-2 (single phase) multiprocess welder c/w electrode holder and 3m MIG torch (MB25).

▶

Torch accessories, spares & mig rollers

▶

Torch accessories, spares SEE OPPOSITE & FRONT PAGE

SEE OPPOSITE

Call: 01522 507600 � Email: agsales@spaldings.co.uk � Web: www.spaldings.co.uk

 For new products visit: www.spaldings.co.uk

MIG WELDERS

NEW

NEW

GYS PROMIG 400-4S

GYS MONOGYS 250-4

The PROMIG 400-4S is the ideal 3-phase ‘Synergic’ welding machine for maintenance and semi-industrial work. Suitable for welding steel, stainless steel and aluminium, it is recommended for intensive professional use up to ø1.2 mm using its 4-roller wire feeder.

250 Amp, single phase MIG welder with 4 roll wire feed system and semi-synergic control panel.

Controlled by microprocessor, in ‘Synergic’ mode, set up is quick and easy with the machine controlling wire speed; this function avoids complex set up and ensures optimum welding performance.

HIGH PERFORMANCE SINGLE PHASE Rectified current smoothed by capacitors produces: - Optimum fusion - Reduced spatter 3 FUNCTIONS AVAILABLE - 2T: 2 stroke welding.

- 4T: 4 stroke welding, to weld during a long period without constantly pressing the trigger.

- Spot: for plug welding.

SYNERGIC MODE for easy and quick settings - With this function wire speed setting is automatic.

- Simply select: the wire type, the wire ø, the power MONOGYS 250-4CS sets the optimum wire speed.

3-phase 350 Amp MIG Welder

Single phase 250 Amp MIG Welder

3 FUNCTIONS AVAILABLE - 2T: 2 stroke welding.

- 4T: 4 stroke welding, to weld during a long period without constantly pressing the trigger.

- Spot: for plug welding.

SYNERGIC MODE Optimum results without adjusting the wire speed: - Select wire type - Select wire size - Select the power (refer to table on machine) PROMIG 400-4S will ensure: - Optimum wire speed - Pre-gas / post-gas - Burnback PROMIG 400-4S will display: - Wire speed - Voltage - Current To realise WPS in the field of application of a WPQR. - WPS: Welding Procedure Specification - WPQR: Welding Procedure Qualification Record Manual mode - Manual adjustment option of the wire speed and power.

SPECIFICATION Approval . . . . . . . CE to EN 60974-1.

Supply . . . . . . . . . 3 phase 400 volts (+/-15%).

Fuse rating. . . . . . 16 amps.

Welding range. . . 40–350 amps.

Duty cycle . . . . . . 60% @ 270 amps.

Weld wire size. . . 0.8–1.2mm.

Reel dia. size. . . . 200–300mm.

Dimensions. . . . . L890 x W490

x H880mm.

Weight. . . . . . . . . 108kg.

17140 MONOGYS 250-4CS (single phase) MIG welder c/w 3m MB25 torch.

MIG SPARES

1.0–1.2mm MIG Drive Roller Drive rollers for use with 17140, 17145 & 17195.

17145 PROMIG 400-4S (3 phase) MIG welder c/w 3m MB36 torch.

Torches; 16958 and 16951 also previously supplied with OXFORD welders.

17147 GYS Drive Roller for 1.0–1.2mm MIG wire.

Pack of 2.

MIG TORCHES & SPARES for GYS & OXFORD 16951

16958

M6 THREAD

M8 THREAD

16955 16956 16987 16986

Consumables Kit for 350A MIG Torch – 27 Piece Suitable for the 350A MIG torch (Binzel MB36) supplied with GYS and Oxford welders.

Contact tips: 5x (M8–Ø 1.0), 5x (M8–Ø 1.0), 5x (M8–Ø 1.0), 5x (M8–Ø 1.2), 5x (Alu – M8–Ø 1.0), 5x (Alu – M8–Ø 1.2), plus 2x tip holder, 3x ceramic insulator, 2x conical shroud.

17146 Consumables kit for 350A torch.

SPECIFICATION Approval . . . . . . . CE to EN 60974-1.

IP 21 protection rated.

Supply . . . . . . . . . Single phase

230 volts (+/-15%).

Fuse rating. . . . . . 25 amps.

Welding range. . . 40–250 amps.

Duty cycle . . . . . . 60% @ 155 amps,

100% @ 110 amps.

Weld wire size. . . 0.8–1.2mm.

Reel size. . . . . . . . 200–300mm.

Dimensions. . . . . L740 x W330

x H635mm.

Weight. . . . . . . . . 75.5kg.

16944 16947 16946 16945

04207

350A MIG Torch & Spares 16958 350 amp Euro fitting torch c/w 4m cable.

16955 Conical shroud (for 16958). Pk of 3.

16956 Ceramic insulator (for 16958).

Pack of 3.

Consumables Kit for 250A MIG Torch – 26 Piece Suitable for the 250A MIG torch (Binzel MB25) supplied with GYS and Oxford welders.

16987 Tip holder (for 16958). Pack of 5.

Contact tips: 5x (M6–Ø 0,8 steel/stainless), 5x (M6–Ø 1,0 steel/stainless), 5x (M6–Ø 1,0 Alu), 3x Contact tip supports 250A, 5x Springs for nozzle, 3x Nozzles 250A.

04207 Repl. Argon regulator c/w gauges.

17141 Consumables kit for 250A torch.

M8 Threaded Contact tips. Packs of 10.

16986 1.2mm.

16985 1.0mm.

16984 0.8mm

04207

250A MIG Torch & Spares 16951 250 amp torch, Euro fitting c/w 4m cable.

16948 4m torch liner (for 16951).

16944 Conical shroud (for 16951).

Pack of 3.

M6 Threaded Contact tips. Packs of 10.

16947 0.8mm.

16946 1.0mm.

16945 1.2mm.

04207 Repl. Argon regulator c/w gauges.

Call: 01522 507600 � Email: agsales@spaldings.co.uk � Web: www.spaldings.co.uk

All GYS welding and cutting machines are supplied with a 24 month manufacturers’ warranty

24 MONTH

PLASMA CUTTERS Compact, lightweight and portable

NEW

GYS CUTTER 70 CT Plasma Cutter 3-phase 70 Amp

High performance 70 amp plasma cutter with a cutting capacity of 35mm thick on a multitude of materials. The HF-free arcing system preserves and increases the lifetime of consumables. Designed to be used in difficult environments, it has very robust mechanics and a user-friendly control panel.

MAXIMUM PRODUCTIVITY • Faster cutting speed than using oxygas • Cuts all types of steel (mild, stainless, tempered, HLE), aluminium, copper, etc.

• Optimised cooling using ventilation corridor to isolate the electronic components from dust • Fast and easy replacement of consumables • Premium torch MT-70 TECMO® (leading supplier in Europe) • Premium cutting quality: air cooled torch offering a great arc stability • Consumables compatible with Hypertherm® • User friendly interface with 3 working modes: Cutting / Mesh / locked • Manual setting of the air pressure (4.1 < 6.5 bars) using front LED Indicator • HF-free ignition to prevent disturbances that could interfere with nearby electronic equipment • Compatible with CNC kit for auto cutting tables • IP 23 protection rated 17120 Cutter 70 CT plasma (3-phase) c/w 6m MT-70 torch.

NEW

Consumables Kit for MT-70 Plasma Torch

12 piece kit contains: 1x diffuser, 3x electrode, 3x 50A tip, 3x 70A tip, 1x nozzle, 1x shield deflector.

17123 Consumables kit for MT-70 torch (use with 17120).

NEW

GYS EASYCUT 40

COMPACT AND PORTABLE SPECIFICATION Approval. . . . . . . . . . . CE to EN 60974-1.

Max severance cut. 35mm.

Max. clean cut. . . . . 25mm.

Max. piecing cut. . . 15mm.

De-gouging rate. . . 4.8kg/h.

Duty cycle. . . . . . . . . . 60% @ 70A (40°C).

Output current . . . . 20–70 amps.

Supply . . . . . . . . . . . 3 phase 400 volts.

Fuse rating. . . . . . . . 16 amps.

Dimensions. . . . . . . L520 x W260

x H400mm.

Weight. . . . . . . . . . . 22kg.

Plasma Cutter single-phase 40 Amp

Ultra compact (just 8 kg), the EASYCUT 40 is a plasma cutter with a HF-free starting voltage, perfect for cutting all types of metal up to 20mm thick. With a power output of 40A, it excels in precision cutting at low intensity. Ideal for use in workshop or car body shop, the EASYCUT 40 has great portability and cutting performance.

EFFICIENT AND SIMPLE TO USE • Inverter technology guarantees quality cutting on all types of steels (soft, stainless, hardened, HLE), aluminium, copper, etc.

• Quick and easy installation of consumables • Intuitive control panel with auto torch detection • Manual setting of the air pressure (2.5 < 6.5 bars) • HF-free ignition to prevent disturbances that could interfere with nearby electronic equipment • Built-in over-voltage and over-current protection • Insufficient air pressure or torch detection warning • IP 21 protection rated

SPECIFICATION Approval. . . . . . . . . . . CE to EN 60974-1.

Max severance cut. 20mm.

Max. clean cut. . . . . 15mm.

Duty cycle . . . . . . . . 20 % @ 40 A (40°C).

Output current . . . . 10–40 amps.

Supply . . . . . . . . . . . 1 phase 230 volts.

Fuse rating. . . . . . . . 16 amps.

Dimensions. . . . . . . L420 x W150

x H300mm.

Weight. . . . . . . . . . . 8kg.

17130 Easycut 40 plasma (single phase) c/w 4m TPT40 torch.

PLASMA CUTTER SPARES & ACCESSORIES

Cutting, Chamfering & Guiding Kit for MT-70 Torch 3-in-1 kit for straight plasma cuts, cutting a chamfered edge or precise circular cuts.

Kit includes: 2x guide carriages with adj. screws. 1x compass kit for circular cuts 40–82cm dia., plus 3x anchors.

17122 Guiding kit for MT-70 torch (use with 17120).

Compass Kit for TPT40 Plasma Torch Cut circles between 40–134cm dia.

Consumables Kit for TPT40 Plasma Torch

8 piece kit contains: 1x nozzle, 1x diffuser, 3x tips, 3x electrodes.

Kit includes: 1 x torch holder, 2 x radius arms, 1 x screw down anchor, 1 x pin point anchor, 1 x magnetic anchor.

17132 Consumables kit for TPT40 torch (use with 17130).

17131 Compass kit for TPT40 torch (use with 17130).

Cut circles from 40–82cm dia.

MT-70 Plasma Torch Parts (Use with 17120).

17124 Diffuser. Single

17125 Electrode. Pack of 5.

17126 20A / 50A Fine cutting tip. Pk of 5.

17127 70A Standard cutting tip. Pk of 5.

17128 Nozzle. Single.

17129 Shield deflector. Single.

Compass Kit for MT-70 Plasma Torch

Kit includes: 1x torch holder, 2x radius arms, 1x screw-down anchor, 1x pin point anchor, 1x magnetic anchor.

17121 Compass kit for MT-70 torch (use with 17120).

facebook.com/spaldings.ltd • twitter.com/spaldings Spaldings reserve the right to change specifications without prior notice.

TPT40 Plasma Torch Parts (Use with 17130).

17133 Swirl Ring/Diffuser. Single.

17134 Electrode. Pack of 10.

17135 Tip. Pack of 10.

17136 Nozzle. Pack of 4.

Ireland Free fone: 1800 255455 Free fax: 1800 804018 Email: info@spaldings.ie Web: www.spaldings.ie

UK Call: 01522 507600 Free fax: 0800 4715075 Email: agsales@spaldings.co.uk Web: www.spaldings.co.uk