Used at the peak or ridge of a roof where two sides meet at an angle. Provides a sleek finish for roofs with two sloping sides.
Monoridge
Designed for roofs with a single sloping side. Covers the ridge line and prevents water penetration at the top of the roof.
Outer Corner
Designed to cover and protect the external corners of a building where two cladding surfaces meet. It creates a neat finish and prevents water from seeping into the joint where the corner panels meet.
Inner Corner
Used where two surfaces meet inside the building. It ensures a watertight seal at internal corners, preventing water ingress and protecting the structure.
Eaves Flashing
Installed at the eaves of a roof (where the roof meets the gutter). Helps to channel water into the gutter and prevents water from getting under the roof at the eaves.
Frame Flashing
Typically installed around window and door frames where they meet the cladding. It seals the edges, preventing water and air from penetrating through the small gaps between the cladding and frames.
A full range of trims, flashings, and accessories is available to complement your Comax Klik standing seam roofing installation
Flashings and accessories
Barge Trim
Installed along the edge of a roof where it meets the gable end. It provides a clean finish and protects the exposed edges of the roof sheeting from wind and water ingress.
Apron Flashing
Installed where a roof meets a vertical wall or chimney. It acts as a bridge, covering the gap between the roof surface and the wall to prevent water ingress.
Cill Flashing
Installed at the bottom edge of windows or other openings. It helps direct water away from the window frame and prevents moisture from seeping back into the wall or structure below the window.
W Valley Trim
Used in the valley areas of roofs where two sloping roof sections meet to form a V-shape. The W Valley trim provides an additional barrier to channel water down the valley and away from the roof, ensuring that the valley doesn’t become a point of water buildup.
Z-Bar
Used between vertical panels in cladding systems or between horizontal and vertical surfaces. It helps divert water away from the joints, providing a water-resistant barrier in areas where panels overlap.
Cladding Drip Flashing
Used at the bottom edge of cladding panels to direct water away from the structure. The design encourages water to drip off the edge rather than run back onto the building surface.
These components ensure a perfect finish and optimal performance of your roof, while helping to maintain weatherproofing and aesthetic appeal
Comax Klik technical information
(With
Warranty
to 75 years
25mm profile is also available. Please speak to our sales advisors for more details.
Comax Roof Tool kit
We also recommend the Comax Roofs Tool Kit for Klik Standing Seam.
Each tool kit contains:
Left/Right Hand Snips
For narrowing sheets
Folding Pliers
For making upstands and finishing eave folds
Pelican Snips
For general cuts
Folding Tool
455mm wide tool for folding sheets around eave edges
to 40 years
Takeoff service
We offer a takeoff service tailored specifically for Comax orders, to help ensure your project receives the right materials and flashings needed for a simple installation. Our expert team will review your plans and assist you to calculate the quantity of each Comax Klik flashing and component required.
By helping to identify material requirements upfront, our takeoff service streamlines the ordering process, reduces waste, and minimizes unexpected expenses, allowing you to focus on a successful installation.
For more details and to discuss your specific requirements, please contact our Sales team, who will be happy to provide technical advice and help you choose the right accessories for your project.
KEY BENEFITS INCLUDE:
• Simple ‘Klik’-lock assembly mechanism
• Suitable for various roof pitches
• Corrosion resistant
• Long lifespan
• Up to 75 years warranty
• A1 Fire Rated
• UKCA Certified
This product is non-stocked Cut to length
Can’t decide on a colour or finish?
We have samples available. Speak to our friendly team or order online from southernsheeting.co.uk
Enquiries - our depots
South East
Hill Place Farm, Turners Hill Road, East Grinstead, West Sussex RH19 4LX
Tel: 01342 315 300
Saint Hill Farm Business Park, West Hoathly Road, East Grinstead, West Sussex RH19 4NG
Tel: 01342 315 300
Unit 4a and 4b Wymeswold Business Quarter, Burton Lane, Wymeswold, Leicestershire LE12 5BS
