Industrial Machinery Digest Quarterly -IMD Quarter 4, 2017

Partnering for a Quick Change Guiding the industry

QUARTER 4 | 2017

IndustrIalMachInerydIgest.coM

RESHORING:

A COLLABORATIVE CHALLENGE

ardness is determined by production condition. cted hardness value is informed in a quotation of gears.

ar precision grade table : tioned equivalent grades are for reference only. es completely match each other.

Largest selection of

Stock Metric GEARS in North America

15/05/21

14:20:18

259 Elm Place, Mineola, NY 11501 Phone: 516.248.3850 | Fax: 516.248.4385 Email: info@khkgears.us

TABLE OF CONTENTS

10 Guiding The Industry New Tech:

Automated guided vehicles are mobile robots that follow markers or signals during navigation. The first AGV was introduced in the 1950s by Barrett Electronics, and performed a simple towing action, with its position guided by a wire in the floor. Since the 1950s, the market has rapidly increased and AGVs are used across numerous industry sectors.

Publisher, William C. Strickland III william.strickland@indmacdig.com 800-366-0676 ext. 103 | Fax: 866-826-5918 Editor, Nick Boliek nick@indmacdig.com 800-366-0676 ext. 104 | Cell: 205-381-1400 Fax: 866-826-5918 Creative Director, Sean McGuire

Workforce Development:

16 Reshoring:

A Collaborative Challenge

JM Performance products and the reshoring initiative® provide “q&a” analysis of intangibles on turning the tide on this evolving issue.

Industry Insight:

24Partnering for a Quick Change

Machine builder develops fully automated die handling system with 15,000-pound capacity to load and unload presses with staging tables for continuous production; die change time reduced from two hours to ten minutes.

sean@indmacdig.com Cell: 205-603-9112 Ad Materials to: creative@indmacdig.com SALES Sr. Account Executive, Lisa Hanschu lisa@indmacdig.com 785-965-9159 | Fax: 785-965-7199 Strategic Account Executive, Warren Pinheiro warren@indmacdig.com 800-366-0676 ext. 200 | Cell: 205-567-2002 Fax: 866826-5918 Media Adviser, Adrienne Gallender agallender@indmacdig.com 888-407-7737 Accounting, Susan S. Strickland susan@indmacdig.com 205-542-1098 Circulation & Subscriptions IMD, 3590-B Hwy 31 South, Suite 233 Pelham, AL 35124 Fax: 866-826-5918 • circulation@indmacdig.com

30

Reprints To purchase article reprints please call 800-366-0676 ext. 103 or email wstrickland@indmacdig.com

Product Showcase

Industrial Machinery Digest’s Hot Products that you need to know about for the fourth quarter of 2017. Additional products and services for manufacturing can be found on our website. Visit, www.IndustrialMachineryDigest.com

4

| Quarter 4, 2017 | www.IndustrialMachineryDigest.com

source

360 media llc

A publication of: Source 360 Media LLC 3590-B Hwy 31 South PMB #233 Pelham, AL 35124

INDUSTRIAL MACHINERY DIGEST (ISSN 1542-5223) is published 12x per year by Source 360 Media. POSTMASTER: Please send change of address to INDUSTRIAL MACHINERY DIGEST, 3590-B US Hwy 31 South, PMB 233, Pelham, AL 35124. Printed in the U.S.A. SUBSCRIPTION POLICY: Individual subscriptions are available without charge in the U.S. to qualified individuals. Publisher reserves the right to reject nonqualified subscribers. One-year subscription to nonqualified individuals in the United States: $9600. Single copies available (prepaid only) $2000 each.

ADVERTISER INDEX Company Name Page Index Web Address Accudyne Products 5 www.ezpullerusa.com Actek Manufacturing 29 www.actekmfg.com Action Machinery Co., Inc 65 www.actionmachinery.com Alloys & Components 46 www.alloysandcomponents.com AmCon Shows 71 www.amconshows.com Betenbender Mfg. Inc. 27 www.betenbender.com C.H. Hanson 15 www.chhanson.com Carell Corporation 8 www.carellcorp.com Combilift USA 31 www.combilift.com Cosen Saws USA 19 www.cosensaws.com Denver Breaker & Supply 64 www.denverbreaker.com Design 2 Part 53 www.d2p.com Eagle Bending Machines 8 www.eaglebendingmachines.com Eastern Electrical Liquidators 68 www.eastelec.com ENM Co 62, 63 www.enmco.com Essex Structural Steel Co., Inc. 47 www.essexstructuralsteel.com FDK3 Company 35 www.fdk3co.com Filter-1 9 www.filter-1.com H&K Equipment, Inc. 66 www.hkequipment.com Hydrapower Int’l Inc. 59 www.hydrapower-intl.com HyPneuMat Inc. 7, 43 www.hypneumat.com IMDauctions.com 68, 70 www.IMDauctions.com Kanetec USA Corporation 55 www.kanetec.com KHK-USA 3 www.khkgears.us L & L Special Furnace Co., Inc. 68 www.llfurnace.com Marvel Manufacturing Company 23 www.marvelsaws.com Multicam, Inc. 29 www.multicam.com Performance Racing Industry 49 www.performanceracing.com Phase-A-Matic Inc 51 www.phase-a-matic.com Racing Equipment News 21 www.racingequipmentnews.com Scotchman Industries 19 www.scotchman.com Select Equipment Company 69 www.selectequipment.net Stor-Loc Division of Ryan Metal Products 25,41 www.storloc.com Suhner Industrial Products 11, 13, 17,70 www.suhner.com Syclone ATTCO Service 2, 33 www.skyhookmfr.com The Electric Barn 68 www.electricbarn.com Tormach 7 www.tormach.com Trim-Lok Inc 7, 39, 45, 37 www.trimlok.com Ultimate Tube Bender Parts 67 www.benderparts.com

6 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

CNC Mill Starting at:

$8412

x

5100 RPM, 1.5 HP

x

220 VAC - Plug It In Anywhere

x

Options include: ATC, SmartCool, and 4th Axis

x

Conversational Control

TORMACH.COM IMD_V2.indd 1

2/28/2017 3:50:09 PM

www.IndustrialMachineryDigest.com | Quarter 4, 2017 | INDUSTRIAL MACHINERY DIGEST

|

7

WELDING SMOKE COLLECTION PROFESSIONALS

ROLLATRON

WELDTRON

DUSTRON

BUILT BY CLEAN AIR CONSULTANTS 8 0 0 - 2 8 9 - 0 1 8 9 • W W W . F I LT E R -1 . C O M

FLOWTRON

2525 National Dr., Garland, TX 75041 • Phone: 972-278-2664 • Fax: 972-278-1810 • Email: info@filter-1.com www.IndustrialMachineryDigest.com | Quarter 4, 2017 | INDUSTRIAL MACHINERY DIGEST

|

9

G

NEW TECH

uiding The

I

ndustry

Automated guided vehicles are mobile robots that follow markers or signals during navigation. The first AGV was introduced in the 1950s by Barrett Electronics, and performed a simple towing action, with its position guided by a wire in the floor. Since the 1950s, the market has rapidly increased and AGVs are used across numerous industry sectors.

Konrad Lorenz won the Nobel Prize in Physiology and Medicine in 1973 for his experiments with animal behavior.

Lorenz discovered the principle of imprinting, where a bond is formed between a new born animal and a caregiver. This is the mechanism where an auditory or visual stimulus is used to induce the young to follow its parents. In industry, automated guided vehicles (AGVs) use environmental stimuli to follow a specific route.

Here, Jonathan Wilkins, marketing director of obsolete industrial parts supplier, EU Automation, discusses how automated guided vehicles have advanced from simple materials handlers to intelligent autonomous robots.

Why AGVs? Automated guided vehicles are predominantly used for materials handling purposes. This can include a

range of tasks from on time delivery of parts to the production line, to round the clock transit. If the vehicle is equipped with a clamping mechanism, positioning fixtures and tool attachments, it can perform a range of functions.

Depending on the application and requirements, AGVs can function in isolation or in fleets.

This makes the use of AGVs scalable according to need, so a plant manager can make a specific decision on the number of vehicles in a facility.

10 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

AGVs can be equipped with sensors for traceability, so that the plant manager can monitor the position of each individual vehicle and therefore track the movement of materials around a facility.

Pick-up, transit and delivery of items can be time stamped as part of this process to further improve tracking. This information can be integrated into the company’s enterprise resource planning (ERP) or materials resource planning (MRP) systems.

Depending on the application, there are different types of vehicle navigation methods. A plant manager can opt for a very simple system, similar to the earliest AGVs, or can choose more advanced navigation methods.

Navigate The earliest AGVs were guided around the factory by a wired method. To navigate in this way, a wire is embedded into a slot in the floor, and transmits a radio signal, which can be detected by a sensor on the AGV. The AGV is then guided around the facility following the wire. Though this navigation technique is still used today, there are a variety of other methods for plant managers to choose from.

Some AGVs use guide tape that is either magnetic or colored to navigate. Sensors on the AGVs detect the tape and this is used to guide the vehicle.

Guide tape is also used in laser target navigation, where reflective tape is mounted on walls, poles or machines and the AGV calculates distance using a laser transmitter and receiver. This has an advantage over the wired method, because it is easier to change the route of the vehicle as the process of relocating the tape is more straightforward.

In inertial navigation, reference points are embedded into the factory floor at x,y coordinates. The AGV uses information from a sensor, a gyroscope and a wheel encoder to determine location. Changes can be made to the pathway by simply altering the reference points, making this method more flexible. However, some change to factory infrastructure is still required, and the vehicle cannot make independent route planning decisions.

The next step from inertial navigation is open path navigation – this means the vehicle can move independently from one place to another, moving from a guided vehicle to a self-driving vehicle.

From Guided To Self-Driving Traditional AGVs perform defined, pre-programmed movements around a facility. This means there is some difficulty changing the vehicle’s route once specific infrastructure is in place. Recently, more flexible and intelligent vehicles have been introduced, which are able to make decisions in situations that they haven’t encountered before.

This new breed of vehicle can overcome one of the key problems for AGVS – encountering something unexpected. In a changing environment, a self-driving vehicle may be a better fit. This type of vehicle operates independently from a driver or a fixed pre-programmed input directly controlling the steering, acceleration or braking. Laser-based perception and navigation algorithms can be used to dynamically navigate around a factory.

An on-board programmable logic controller (PLC) can be integrated to reduce errors and make decisions. By connecting to the central control system, the vehicle can analyze the reliability and efficiency of its routes and adapt them accordingly.

The vehicle can use machine learning to be more efficient across new situations.

Self-driving vehicles can use an on-board computer and increased numbers of sensors to complete more complex tasks, including decision making. Independent and intelligent navigation methods can even mean the plant manager does not need to modify factory environment or infrastructure. One such navigation technique is natural feature guidance, where the vehicle can record and store images and calculate its position in relation to existing features.

An example of an autonomous AGV is Clearpath Robotics’ OTTO, a self-driving vehicle that can move up to 3,300 pounds at 4.5 mph. OTTO can adapt to take the best route, avoiding collisions as it moves.

The vehicles can also use vision-based guidance systems, using cameras to act as eyes. An additional benefit of this is that plant managers gain a 3D virtual view into the environment the equipment is operating in.

As more factories are upgraded and new

12 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

13 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

NEW TECH

facilities are built, advancing AGVs will prove to be a core component of the smart factory. With improving sensor technology and increasing autonomy,

About EU Automation EU Automation stocks and sells new, used, refurbished and obsolete industrial automation spares.

Its global network of preferred partner warehouses, and wholly owned distribution centers, enables it to offer a unique service within the automation industry, spanning the entire globe. It provides worldwide express delivery on all products meaning it can supply any part, to any destination, at very short notice.

For further information contact: Jonathan Wilkins, EU Automation Unit 3, Parker Court, Staffordshire Technology Park, Stafford, ST18 0WP Telephone: +44 (0) 845 521 3088 www: http://www.euautomation.com e-mail: jonathan.wilkins@euautomation.com Twitter: http://twitter.com/euautomation Fenton, MO 63026-2405 Phone: 636-343-4100 www.beckwoodpress.com Attention: Christie Williams, Corporate Marketing Manager marketing@beckwoodpress.com

or

Alisa Coffey Siemens Digital Factory

MarCom Manager of Aerospace, Automotive, and OEMs 5300 Triangle Pkwy Norcross, GA 30092 (678) 427-8319 alisa.coffey@siemens.com

14 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

VERTICAL MILL

20” DRILL PRESS

10” HORIZONTAL BAND SAW

STEP UP TO PALMGREN METALWORKING MACHINES For more than 95 years Palmgren metalworking machinery has provided an unbeatable level of value, quality and performance. Designed by machinists for machinists our lineup of machines were developed with differentiated and meaningful features.

ENGINE LATHE

10X 20” SURFACE GRINDER

For more information, call 800-827-3398 or go to www.palmgren.com.

RESHORING: WORK FORCE DEVELOPMENT

A Collaborative Challenge

JM Performance products and the reshoring initiative® provide “q&a” analysis of intangibles on turning the tide on this evolving issue.

North America’s $137 billion metalforming industry is driven by the production of a myriad of precision metal products using stamping, fabricating, spinning, slide forming and roll forming technologies, as well as vital value-added processes. In recent decades, approximately 3-to-4 million of all U.S. manufacturing jobs have been cumulatively lost to offshoring.

The tide seems to be turning modestly in recent years by companies returning U.S. production, or sourcing, from offshore. In comparison to 2000-2003, when the United States lost (net) about

220,000 manufacturing jobs per year to offshoring, 2016 achieved a net gain of 27,000.

Progressively bridging this gap presents huge collaborative opportunities and challenges to all associated manufacturers, associations, employees, communities, and the U.S. government itself. The following is a “Q&A” briefing analysis of key factors in the collective goal of gaining momentum in successfully returning the manufacturing of parts or products back to the U.S. from offshore.

Participating in this “return-manufacturing-home” Q&A are two representative entities with

16 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

vested interest on the subject− JM Performance Products, Inc. (JMPP: Fairport Harbor, OH) President, John Stoneback, and the Reshoring Initiative® (RI: Kildeer, Illinois) President, Harry Moser.

“Ultimately at first glance, overseas is a low part cost benefit. Overcoming the shrinking emerging market wage advantages via factoring in all the intangibles makes reshoring a different story.”

JM Performance Products, Inc. is a leading manufacturing innovator of CNC mill spindle optimization products since 2009. Their Patented High Torque Retention Knobs overcome a critical “loosetool” design flaw inherent in CNC v-flange tooling that was responsible for costly CNC milling and boring issues industry wide−in terms of production, time, and tooling.

“Additionally, the current USD is 30% too high vs. other currencies,” says Moser. “Corporate tax rates are too high, there’s no Value-Added Tax (VAT), too many regulations, healthcare costs are too high, oil prices are low, and there’s a weak skilled workforce.

We’ll need stronger innovation and some confidence that the current administration will overcome some of these negatives, so the price gap will shrink enough that companies will start to see that the “hidden costs” of offshoring close the deal.”

An essential element of the patented design is a knob that is longer and reaches a little deeper into the holder’s threaded bore. As a result, all thread engagement occurs in a region of the toolholder where the diameter is large, and where there is correspondingly more material to resist deformation.

The Reshoring Initiative, founded in early 2010, takes action by helping manufacturers realize that local production, in some cases, reduces their total cost of ownership of purchased parts and tooling.

The RI also trains suppliers how to effectively meet the needs of their local customers−giving the suppliers the tools to sell against lower priced offshore competitors. The RI is a nonprofit organization that offers a number of free tools to advance their mission.

What Has Driven/Drive Domestic Manufacturing Overseas The machine capital cost is relatively the same in all countries, both Stoneback and Moser agree that the keydriving variable has always been cheap labor overseas−which drives a low part cost benefit.

“When they first began to offshore, say, to China, the Chinese wages were so low that the price differential was, say, 30 or 40 percent,” explains Moser. “But now that the Chinese wages have come up, that price gap might only be 10 or 15 percent. As a result, even China is outsourcing to Malaysia for cheaper labor.”

“U.S. productivity is 2-to-3 times that of the Chinese, so the key is to have the benefit of the advantages of reshoring be enough to overcome the remaining labor cost gap,” adds Stoneback.

How To Encourage Domestic Manufacturing To Reshore?

“The simple fact is that there are always three key benefits in reshoring: cost, time, and insurance,” says Stoneback. “Maybe even a fourth factor−inventory and space logistics. Those factors are so small to consider if you’re manufacturing in the U.S., that you can do the math in your head as it’s a simple cost analysis.

“Basically there’s more control as the ability to guarantee delivery within five days or so, even by truck, anywhere in the U.S. is reasonable−therefore it’s easier to keep the supply going smoothly without any overseas delays or surprises! Even the weather is a factor in delivering from overseas. The fact is, in overseas production you can anticipate having delays, spreading out money over time, multi-line invoicing, and increased insurance−plus you may have to over-produce to anticipate needed demand.”

“In the simplest terms, you can anticipate approximately 4-to-5 times shipping cost variance in bringing products in from China vs. the U.S. That’s not even factoring in the importer’s mark-up on products from overseas which could be upwards of 15 cents on the USD.” “There are advantages of building dies in the U.S. to manufacture components and we should be focused on bringing them back” believes Moser. “Factors such as duty, freight costs, tied-up cash flow, poor product quality, intellectual property risk, and delayed delivery are all reduced. There also would be the value-added benefits of ease of attending

18 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

COSEN SAWS USA

AV-2026NC Vertical Tilt Frame Band Saw

www.IndustrialMachineryDigest.com | Quarter 4, 2017 | INDUSTRIAL MACHINERY DIGEST

|

19

run-off, ability to send the die back quickly for correction, spare parts availability, and ease of partnering with the customer, amongst others.”

“When we send high volume production work overseas they don’t make one die here,” says Stoneback. “Dies are produced cheap for plastic parts overseas, and they just throw them away and send another in from overseas at pennies on the dollar vs. refurbishing existing dies. When dies are manufactured in the U.S., we make the molds to last and can customize to the application, provide rapid prototypes, obtain first article approval quickly, control cost of ownership, and have the ability for the customer to come back whenever they want and the mold is still there for the next order.”

Promoting A Domestic Manufacturing Renaissance “Nationally and corporation-wise, we need a more highly skilled workforce, advanced basic education, and improved automation,” says Moser. “By promoting partnerships with Skilled Workforce and Economic Development Programs, embracing U.S. companies with reshoring-focused technologies like JMPP, and the use of the Reshoring Initiative’s Total Cost of Ownership Estimator®, we can collectively make reshoring a more viable short and long-term platform for more orders, jobs, and profitability.”

time. “. In fact, a single operator can run at least one additional milling machine (upwards to a max of four) once the work piece is set, you just press a button on the machine. Imagine the production savings in that equation in reducing cycle times, labor costs, and delivery time−all while improving quality and surface finish.”

Quantify The “Hidden Costs” Of Offshoring Vs. Reshoring The Reshoring Initiative and JM Performance Products both offer a free analytical tool that can aid manufacturers with identifying key cost analysis factors in offshoring vs. reshoring production. JMPP’s Return On Investment (ROI) analysis shows exactly how much you save and overall value in production by converting to their High Torque Retention Knobs.

RI’s TCO Estimator helps decide whether the resulting lower manufacturing cost reduces the price gap enough to be overcome by the higher offshore “hidden costs.”

“In today’s offshoring climate,” adds Stoneback, } we’re left with more short order production runs. We need to train our workforce so they can handle the capacity of the jobs that are big in volume that can create long-term employment. Plants overseas use less and less people and more robotics−we need to train people so they are skilled craftsmen again.”

Moser believes reducing labor hours is most important. “Since U.S. wage per hour for labor is higher than overseas options. For example, manufacturers that have technological advantages of reducing production time in areas such as milling machine, polishing, and refurbishing would be significant.”

“Education is a factor,” believes Stoneback, “approximately 1/3 less training is required for a CNC milling person with our High Torque Retention Knobs. Additionally, there is no variance with our product as you set up the job once and use them the same way identically−so there’s no additional set-up 20 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

YOUR RESOURCE FOR TODAY’S RACER

Subscribe Today... It’s FREE! If you search for more Power and Performance...

You now have it at your fingertips!

If you are a drag racer on the street or strip, circle track racer on dirt or asphalt, road or off road racer, here is the resource you have been waiting for. With today’s technology Racing Equipment News is an online publication that is as mobile and interactive as you are as today’s racer. If your quest is for more power and performance this magazine will have product and service based content to help you with the research and development needed to become the best racer.

Sign Up Today.

Click Here Or log on to

www.racingequipmentnews.com Click on the sign up tab

Published by

Stay up-to-date and follow us on...

2 0 5 . 6 1 3 . 5 9 1 0

racingequipmentnews.com

“Most companies make sourcing decisions based solely on price,” says Moser, “oftentimes resulting in a 20-to-30 percent miscalculation of actual offshoring costs. The TCO Estimator is a free online tool that helps companies account for all relevant factors− overhead, balance sheet, risks, corporate strategy and other external and internal business considerations−to determine the true total cost of ownership.

By leveraging this information, companies can better evaluate sourcing, identify alternatives, and even make a case when selling against offshore competitors.

“The TCO Estimator has been used by hundreds of companies to quantify the “hidden costs” of offshoring or reshoring. It focuses on asking the companies what products are causing “pain” = large “hidden costs.” They use TCO to find the products where the hidden costs are greater than the price gap. Morey Corp used our Estimator to show that even though its price was higher than the Chinese competitor, its TCO was lower and saved a $60 million order.”

“Typical CNC milling centers are running machines 20-40% slower than they should be” explains Stoneback. “If you are able to significantly increase the speed of machines via eliminating the deficienciesasofs conventional retention knobs vs. JMPP High Torque Retention Knobs, conservative estimate savings of 10-15% can be achieved.”

“A simple example: 1 mill x 8 hours per day=8 hours; 8x5 days per week=40 hours; 40 hours x billable rate of $100=$4,000/per week; $4,000 x 52 = $208,000 annually. $208,000 x 0.10=$20,800 lost revenue per year.”

Advancing The Reshoring Renaissance “Reshoring is showing incremental strength across the board in leading industries such as transportation, equipment, appliances, plastic and rubber products, fabricated metal products, electronics, and appare,” says Moser.

“For companies with unique technologies such as ours, it’s as simple as converting existing CNC systems to the new knobs to immediately reduce manufacturing costs,” says Stoneback, “and educating people how to do setups and working the parts.

Ultimately, less training and less tooling−everything is a plus as a 10-30% overall productivity increase is a realistic and achievable goal.”

“With the High Torque Retention Knobs you start subtracting 20% on time, tooling costs, education, job set-up, and there’s no maintenance. Any product that requires a lot of people to make is going to be desired by all sides, and we need more of these high volume production jobs reshored.

About JM Performance Products, Inc.

“We offer customers a free analytical conversion consultation based on ROI in using our product, which can assist them in determining overall production savings in manufacturing. It starts with a simple equation−at a conservative minimum of 10% productivity increase using our High Torque Retention Knobs vs. convention knobs, how would it affect the health of your company?”

Established in 1966, JM Performance Products, Inc. (JMPP) has firmly established itself as a leading manufacturer of CNC mill spindle optimization products.

Across a myriad of markets, JMPP is dedicated to reshoring with over 500 styles of patented Retention Knobs for BT, DIN, ISO, and CAT toolholders from 30 taper to 60 taper−all manufactured and material sourced in the United States! All products are engineered to optimize milling machine performance “Take the number of mills in your shop and multi- including: improving finishes, eliminating run-out, ply that times the number of hours per day you run. reducing chatter and harmonics, decreasing set-up Now take that number and multiply it by the number times, extending tool life, and increasing spindle perof days per week that you’re running the mills. Mulformance. tiply that number by your hourly billable rate. Now multiply that number by 52 weeks. The number you For more details about JMPP contact: calculated is your unadjusted yearly revenue. Now, www.jmperformanceproducts.com take that yearly revenue figure and multiply it by 10%−that’s the number that represents your annual For more details on the Reshoring Initiative informalost revenue.” tion contact: www.reshorenow.org

22 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

INDUSTRY INSIGHT

Partnering for a Quick Change: Beckwood Partners With Siemens To Produce Hydraulic Press, QDC Workcells

Machine builder develops fully automated die handling system with 15,000-pound capacity to load and unload presses with staging tables for continuous production; die change time reduced from two hours to ten minutes Beckwood Corporation in Fenton, Missouri (St. Louis) is a leading manufacturer of custom hydraulic presses, automation systems and the Triform line of precision forming equipment. While their machinery serves a variety of industries and applications, they excel at developing robust aerospace forming technologies engineered for accuracy and repeatability. In detailing the sophistication of their machine designs for this challenging market segment, their website includes something of a company mantra, “It IS rocket science.�

One customer, a metalform fabricator and producer of various components for the commercial and military aircraft sectors, brought Beckwood their challenge. The company was seeking a turnkey package consisting of two 1400-ton hydraulic presses and two automated stamping die handling systems to load and unload the presses more efficiently than the conventional forklift and manual labor-intensive system this customer was currently utilizing. The presses and quick die change (QDC) workcells would be used to form a variety of parts in relatively low volumes, so the system to

24 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

as s

25 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

be designed needed a more automated die handling system. In addition, a 42”-diameter deep draw sheet hydroforming press with staging table was needed.

Such a press would be the largest of its kind in the world, once produced.

A critical part of the challenge involved the need for a QDC system with 15,000-pound capacity to feed each 1400-ton press. As Beckwood’s lead electrical engineer John Harte explains, “We conducted a thorough review with all our local die cart suppliers and all passed on the bid, citing too many obstacles on that large a load. So, as we often do, we decided to design, engineer and build the system ourselves.”

The presses each had a footprint approximately 30’ square, and the QDC would need to service the presses with T-table staging devices, allowing the next die to be prepped and ready to insert upon completion of the previous run cycle.

With the degree of automation involved, Beckwood worked with the customer’s engineering staff to devise a workcell concept comprised of two 4-post presses, each with a QDC system including a cart, rack and T-table with 15,000-pound load capacity. Each press would be over 33’ in height and positioned in a 10’ deep pit.

As the customer was a longtime user of Siemens motion control and HMI, they specified this supplier for the project. Harte connected with Derek Eastep, his account manager for Siemens, and the product list for the project began to take shape.

Various drives, PLCs, displays and motion controllers were specified. The latter was a critical component, as the motion controller was required to operate all press movements, as well as the motor starters, QDC integration, light curtains that protect the workcell and operators plus area scanners that maintain the integrated safety condition monitoring on the entire cell.

The system logic and data logging setup was to be done by the customer, who had considerable experience with Siemens controls, with the Beckwood team integrating the QDC and overall cell management.

The QDC operates in tandem with the two presses, using four 15HP motors to drive the lead

screws on this massive die handling system. They are electrically geared through the onboard Siemens PLC to move the ram and shuttle. Additional motors and drives on the feed tables allow the next die to be positioned during press operation. When a press cycle is completed, the air bags on the feed tables lift the next die for positioning onto the QDC, then a shuttle inserts the die inside the press, with all motion controlled by the PLC. These T-tables and the QDC were designed, engineered, built and tested by Beckwood at their factory prior to shipment and installation at the customer’s facility. Both Beckwood and Siemens personnel were active in the commissioning of the entire system.

The PLC is a Siemens S7-1515—a robust controller that integrates function control, safety and condition display in a single module with Profinet protocol for bus communication. Through the TIA Portal and Step 7 software provided by Siemens, the end user can customize the operation of the devices remotely, integrating multiple part files and related safety commands in one controller. This “library” feature allows the end user, as they run a variety of parts during a shift, for example, to use one software package to program quickly and more efficiently.

Likewise, the safety switches on the entire system are programmed through this secure and redundant safety back-up software through the TIA Portal.

All motor movements on the twin four-post presses are controlled with Siemens drive technology. In operation, the Beckwood presses with the QDC systems are expected to reduce die setup and changeover from approximately two hours to ten minutes.

As Derek Eastep from Siemens notes, “Because the end user was a longtime customer, we performed the application engineering with Beckwood and their customer, fully confident that the system would be set up and running in a relatively short time, as all parties had good familiarity with our protocols.”

The two 1400-ton presses in the workcells are Beckwood’s robust four-post frame style with replaceable, graphite-impregnated bronze bushings and solid chrome-plated posts to ensure precision ram guidance. Designed to form parts with challenging geometries in low-volume, high-mix production environments, the 42” Triform deep draw

26 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

A PRECISION CUT DOESN’T HAPPEN

BY CHANCE

HYDRAULIC SHEARS:

1/8” (10GA), 3/16”, 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 1” and 1-1/4”

HYDRAULIC PRESS BRAKES: 20-Ton to 1000-Ton C-FRAME PRESSES: 40-Ton to 200-Ton CUSTOM DESIGNS: for Custom Applications RETROFIT BACKGAUGES:

for Shears and Press Brakes. Made to fit most machines with minimum modifications.

PRECISION KNIFE SHARPENING

MADE IN THE USA!

CALL FOR A FREE CATALOG! 27

Phone: 319-435-2378 | Fax: 319-435-2262 sales@betenbender.com | www.betenbender.com | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

sheet hydroforming press will be the largest press of its kind in the world.

Josh Dixon, director of sales & marketing at Beckwood, says in the company video, “We hate the word ‘no’.” The success of this unique and first-of-kind press and QDC workcell, built by Beckwood with the help of its controls supplier Siemens, bears out that statement.

Due to the versatile nature of Beckwood’s “built to order” business model, their machines are engineered to serve a variety of industries. Beckwood’s extensive experience serving so many industries provides a unique vantage point that customers find incredibly valuable. They are often able to recommend process improvements that customers may have never known or considered, revolutionizing their manufacturing operations. Beyond metal forming, the company also manufactures presses used to form rubber, plastic, composites and other material substrates. The business started in 1976 and is today led by company president Jeff Debus.

For more information on this story, please contact: BECKWOOD CORPORATION 889 Horan Drive Fenton, MO 63026-2405 Phone: 636-343-4100 www.beckwoodpress.com Attention: Christie Williams, Corporate Marketing Manager marketing@beckwoodpress.com or Alisa Coffey Siemens Digital Factory MarCom Manager of Aerospace, Automotive, and OEMs 5300 Triangle Pkwy Norcross, GA 30092 (678) 427-8319 alisa.coffey@siemens.com About Siemens USA Siemens Corporation is a U.S. subsidiary of Siemens AG, a global powerhouse focusing on the areas of electrification, automation and digitalization. One of the world’s largest producers of energy-efficient, resource-saving technologies, Siemens is a leading supplier of systems for power generation and transmission as well as medical diagnosis.

With approximately 348,000 employees in more than 190 countries, Siemens reported worldwide revenue of $86.2 billion in fiscal 2015. Siemens in the USA reported revenue of $22.4 billion, including $5.5 billion in exports, and employs approximately 50,000 people throughout all 50 states and Puerto Rico.

28 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

$19,900

SAFE AND EASY

LIFTING

SOLUTIONS

HOIST RINGS ARE: 200% Proof Load Tested Each Ring Has Serial Numbers Orders Shipped Same Day Rated load 400 lbs - 250,000 lbs 0° 18 ts vo

Pi

It’s Easy to Cut Accurate and Quality Parts iPlasmaCNC is the plasma cutting choice for value and performance to cut mild steel, stainless steel, and aluminum. This affordable cutting solution features Hypertherm PowerMax™ plasma cutting torch technology. Coreo software is also included and allows iPlasmaCNC operators to simplify the cutting process.

Forged Street Plate™ Swivel Hoist Rings

Side Load Hoist Rings

Hoist Ring Kits

Mold Handler™ Swivel & Pivot Hoist Rings

Forged Swivel Hoist Rings

Round Base Swivel & Pivot Hoist Rings

Swivels 360°

Drop Forged Hoist Rings

APPLICATIONS: Job Shops Sign Shops Marine Fabrication Oil Field Equipment Automotive Fabrication

Industrial Hobbyist Sculpture Artist Architectural Iron Work HVAC Fabrication Agricultural Equipment ISO 9001

www.iplasmacnc.com

Call Today! 844.363.3147

PHONE: 800-752-7229 • FAX: 626-581-3423 SALES@ACTEKMFG.COM • ACTEKMFG.COM

Call or Email for a Free Catalog 29 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

PRODUCT SHOWCASE LISTINGS GF Machining Solutions

Mahr

For more information, visit www.gfms.com

For more information, visit www.mahrexactly.com

ABB

GMTA

For more information, visit www.abb.com/robotics

For more information, visit www.gmtamerica.com

GEFERTEC

Western Digital Corporation

For more information, visit www.gefertec.de

For more information, visit www.sandisk.com

Esco Tool

Doosan

For more information, visit www.escotool.com

For more information, visit www.doosanmachinetools.com

Laser Optics

3M™

For more information, visit www.laserresearch.net

For more information, visit www.3m.com/workersafety

Palmgren

W R. MEADOWS

For more information, visit www.palmgren.com

For more information, visit www.wrmeadows.com

EXSYS

EZ-Puller

For more information, visit www.exsys-tool.com

For more information, visit www.ezpullerusa.com

Bacharach

Yaskawa

For more information, visit www.mybacharach.com

For more information, visit www.motoman.com

KYZEN

Heimatec

For more information, visit www.kyzen.com

For more information, visit www.heimatecinc.com

TDM Systems

HEMCO

For more information, visit www.tdmsystems.com

For more information, visit www.hemcocorp.com

DESTACO

Sandvik Coromant

For more information, visit www.destaco.com

For more information, visit www.sandvik.coromant.com

Walter

OMAX waterjet systems

For more information, visit www.walter-tools.com

For more information, visit www.omax.com

Slater Tools

Creform Corporation

For more information, visit www.slatertools.com

For more information, visit www.creform.com

HONEYWELL

EXAIR

For more information, visit www.honeywellsafety.com

For more information, visit www.exair.com

Seco

Chicago Pneumatic

For more information, visit www.secotools.com

For more information, visit www.cp.com

Suhner

KAPP NILES

For more information, visit www.suhner.com

For more information, visit www.kapp-niles.com

Fairbanks Scales Inc.

Maxum

For more information, visit www.fairbanks.com

For more information, visit www.maxumair.com

CortecÂŽ

Dynabrade

For more information, visit www.cortecpackaging.com

For more information, visit www.dynabrade.com

Grizzly Industrial

Cosen

For more information, visit www.grizzly.com

For more information, visit www.cosensaws.com

30 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

Mastercam

DCM

For more information, visit www.mastercam.com

For more information, visit www.dcm-tech.com

Hexagon Manufacturing

Hydmech

For more information, visit www.hexagonmi.com

For more information, visit www.hydmech.com

EMAG

Wildeck

For more information, visit www.emag.com

For more information, visit www.wildeck.com

RÖHM

Messer Cutting

For more information, visit www.rohm-products.com

For more information, visit www.messer-cs.com

Epilog Laser

Big Ass Solutions

For more information, visit www.epiloglaser.com

For more information, visit www.bigasssolutions.com

Makino

Universal Robots

For more information, visit www.makino.com

For more information, visit www.universal-robots.com

Siemens

Epson

For more information, visit www.industry.usa.siemens.com

For more information, visit www.robots.epson.com

Enmco For more information, visit www.enmco.com

COMBi

iF T

L I F T I N G I N N O VAT I O N

World’s Leading Supplier of Customized Handling Solutions Combilift, leaders in providing material handling solutions, offer a range of innovative products designed to handle long and oversized loads better than anyone else.

• • • •

Improved storage utilization Safer product handling Increased productivity Indoor / Outdoor

With capacities ranging from 3,200 to 180,000lbs, it’s a safe choice to go with Combilift.

Call us today to schedule a free site survey

4 Directional Forklifts, Sideloaders, Pedestrian Stackers & Straddle Carriers Combilift USA | Greensboro North Carolina | Toll Free: 877 266 2456 | info@combilift.com

www.IndustrialMachineryDigest.com | Quarter 4, 2017 | INDUSTRIAL MACHINERY DIGEST

|

31

Market’s Smallest Die Sinker GF Machining Solutions’ new compact FORM E 350 machine is an ideal die sinking EDM solution for small shops. Even with the smallest footprint on the market, the machine still boasts several design and performance features that enhance a shop’s competitive advantage. A sturdy C-axis construction, cross table and cast iron frame offer high stability and force reduction, which helps maintain a precise spark gap between the part and the electrode. Integrated glass scales preserve long-term, repeatability and eliminate the need for recalibration as well as any errors found in traditional screw systems due to backlash and wear.

For more information, visit www.gfms.com

Robotic Inspection System from ABB

ABB’s Robotic Inspection System with integrated 3D vision is the first robot-integrated inspection solution that digitizes and simplifies quality control while improving cycle times. It consists of a 3D white-light scanning sensor mounted to the arm of an ABB robot, relying on the agility of the robot to provide the precise movements necessary for the sensors to access most areas of both simple and complex parts from the optimum angle. The sensor technology rapidly records and compares highly detailed geometric and surface data with digital CAD models, enabling the automated inspection of manufactured parts and pieces.

For more information, visit www.abb.com/robotics

3DMP from GEFERTEC 3DMP® is ready to use in the new GTarc Machine, which is available as a 3-axis version for parts up to 3 m3 and as a 5-axis version for parts up to 0.8 m³. These characteristics show that the machining center is ideally suited to produce complex and larger parts made of steel, nickel, titanium, or aluminum. Siemens AG is using the new technology in its Digital Factory (DF) division. A special 3DMP® CAM software calculates the data out of the CAD-modeled part, which enables the CNC-control unit to position the welding head with high precision. The machine produces the near-net-shape part fully automatically.

For more information, visit www.gefertec.de 32 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

Electric Pipe Beveling Tool Preps Heavy-Wall Stainless Steel Pipe A new, electric portable pipe machining tool that is a powerful alternative to pneumatic tools for end prepping boiler tubes and other pipe fabrication work has been introduced by Esco Tool. The ESCO MILLHOG® Mini Electric Pipe Beveling Tool rigidly mounts to the tube or pipe I.D. and is suited for end prepping heavy-wall stainless steel pipe and other highly alloyed metals when compressed air is not available. Featuring a high-torque variable speed motor that spins at 19 to 66 RPM, it is ideal for beveling hard and soft boiler tubes and pipes from 1.25” I.D. to 6.625” O.D.

For more information, visit www.escotool.com

CO2 Laser Optics Match Cutting Depth Requirements A line of OEM compatible replacement laser optics that come in several different focal lengths to match the depth of cut requirements for sign makers is available from Laser Research Optics. Laser Research ZnSe Optics for Sign-Making Lasers feature a selection of focal lengths from 2.0” to 7.5”, in 0.5” increments, for cutting light metals and signage requiring clean, sharp detailed edges. Available in 1.0” and 1.5” dia. sizes, these CO2 optics are optimized for 10.6 microns and meet ISO-10110 specifications for optical elements.

For more information, visit www.laserresearch.net

Palmgren’s Two-Speed Vertical Belt Grinder Multi-tasking finishing machine, Palmgren’s 1.5-inch two-speed vertical belt grinder can handle simple to complete workpieces. The #9682410 belt grinder can perform external, radius and internal operations with its optional attachments. The four-wheel finishing machine provides maximum versatility with platen finishing, loose belt or slack back finishing or precision sizing and finishing on the hardened steel tilting table.

Palmgren is a C.H. Hanson brand.

For more information, visit www.palmgren.com

34 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

EXSYS EPPINGER Hypoid Gearboxes Provide Unmatched Versatility EXSYS Tool, Inc. has further expanded its EPPINGER gearbox offerings to include the HT-type hypoid gearboxes that feature compact, robust designs suitable for both specific and dynamic applications. The EPPINGER HT-type hypoid gearboxes have Monobloc housings that distinguish this series with extreme stability and offers maximum precision and efficiency. A highly flexible flange and coupling system enables the gearboxes to be connected to a host of servo motors without difficulty.

With solid steel alloy and hollow shafts for shrink disc connection, users can install the gearboxes in various positions with a choice of the output side.

For more information, visit www.exsys-tool.com

Bacharach offers Instrument for CO2 Leak Detection As the use of CO2 gas increases in popularity as a natural refrigerant due to its low environmental impact and increasing HFC (Hydrofluorocarbon) regulations, Bacharach, from monitoring instruments and data solutions, to combustion and emissions analyzers, is offering an effective CO2 leak detection monitor for industrial and retail refrigeration applications. This instrument is selective, taking into consideration both response times and operating temperatures in these applications. Bacharach’s instrument is also appropriately specified for use in the operating temperatures required within refrigeration applications. The Bacharach sensor is rated for use at temperatures as low as -40°C / -40°F.

For more information, visit www.mybacharach.com

METALNOX® from KYZEN

METALNOX® M6324CP is a heavy-duty, alkaline cleaner and inhibitor formulated to remove paraffinic oils used in a wide range of machining, stamping, and deep draw operations. M6324CP is built with effective steel corrosion inhibitors to provide long-term protection from rust. The product is excellent in removal of difficult soils, including carbon smut and chlorinated oils and provides effective steel corrosion protection for up to 90 days. As part of KYZEN Corrosion Inhibitors, the product also provides environmental advantages because METALNOX® M6324CP is a non-flammable, alkaline, biodegradable aqueous solution.

For more information, visit www.kyzen.com

36 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

www.IndustrialMachineryDigest.com | Quarter 4, 2017 | INDUSTRIAL MACHINERY DIGEST

|

37

TDM Systems introduces TDM Cloud Line TDM Systems, a subsidiary of Sandvik Machining Solutions has announced the introduction of the world’s first cloud-based solution for Tool Data Management…TDM Cloud Line. A solution that enables manufacturers to easily access tool data wherever, whenever. The official launch is slated for December 1, 2017. TDM Cloud Line offers numerous advantages: Easy set-up of your own tool database; optimally prepared, tested and comprehensive tool data for immediate, intuitive use; provisioning of correct CAM data; manufacturer-independent tool assembly; statistical evaluation; clearly structured and individually configurable user interface and cloud-based solution available at any time in any location.

For more information, visit www.tdmsystems.com

DESTACO Introduces New Deepdish Series Vacuum Cups The new DESTACO Deepdish Series Vacuum Cups feature an all new bell-shaped body design, available in three sizes, 65, 90 and 110 mm.

Unique, molded-in gussets prevent the cup edges from rolling up on convex surfaces while the thin, pliable design and special inner tread pattern allow the cups to effectively adhere to flat, convex, concave, domed and oily surfaces for maximum grip performance. Another key attribute that sets the new DESTACO Deepdish cups apart from all others is the polyurethane materials-of-construction. Polyurethane provides superior wear-resistance when compared to rubber to promote longer service life and reduced maintenance.

For more information, visit www.destaco.com

New MD133 Supreme, A Dynamic Milling Cutter From Walter The new MD133 Supreme milling cutter from Walter, designed specifically for dynamic milling, delivers increased process reliability, particularly during unmanned operation. It brings a heightened productivity thanks to a higher metal removal rate and a reduction in machining time. The first in Walter’s projected line of dynamic milling cutters, the MD133 Supreme has diameters of 0.25 to 0.75 in. (6 to 20 mm) and cutting lengths to 5 × Dc. They are designed for operating parameters typical of dynamic milling, such as a small width of engagement, and a high depth of cut facilitated by a large cutting length.

For more information, visit www.walter-tools.com 38 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

www.IndustrialMachineryDigest.com | Quarter 4, 2017 | INDUSTRIAL MACHINERY DIGEST

|

39

New Range Of Go / No-Go Gages From Slater Tools Now Available Slater Tools introduces its new and comprehensive product line of Go / No-Go gage sets for customerspecific applications. The full range of gages are designed and engineered precisely to inspect your parts for machining process variations such as form size, twist and tool wear. Ideal for use with Slater Tools Rotary Broaches, these gages are held to extremely tight tolerances, within .0002 inches (.005 mm). They are produced from oil hardened M2 high speed steel and can be custom made to any shape or size to fit custom needs.

For more information, visit www.slatertools.com

Seco Re-engineers Perfomax® to Further Optimize Drilling Performance With a new re-engineered design, the Seco Perfomax indexable insert drill delivers higher drilling parameters and longer tool life as well as exceptional chip control and evacuation. The drill’s innovative features include new flute designs with special anti-friction surfaces and laser hardened fronts for added strength, stability and accuracy.

Perfomax flutes feature improved helix angles along with smoother chip flute exits and Seco’s engineered wave pattern that minimizes contact between chips and flute surfaces. The drill generates shorter chips that evacuate quickly and easily to significantly reduce the risk of chip jamming for higher application security.

For more information, visit www.secotools.com

Sunmic 60 Micro Motor System In many technical fields, ultrafine grinding is one of the tasks that gives the product its final polish – in the truest sense of the word. This applies equally to both precision and the visual appeal. SUHNER now offers an innovative grinding, milling and polishing system, SUNmic 60. The central element is an intelligent control unit with touch panel that can accept a range of micro motors and tool hand pieces depending on the application. The control part has modern features such as touch screen operation on a glass display, the option to save settings and a rotation speed regulator with tangible resistance.

For more information, visit www.suhner.com 40 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

New FB2550 Weighing Instrument Fairbanks Scales Inc. announces the new and improved FB2550 instrument (the FB2558), which maintains an industry leading feature set while incorporating faster processing power, an updated operating system, and more memory. Up to five FB2558 instruments can be networked, sharing transactional data and traffic light controls from up to eight scale platforms. Transaction data is shared between each networked instrument. The new FB2558 features a powerful integrated web utility that gives technicians complete access to all menu options, including calibration, with a user friendly, web accessible interface.

For more information, visit www.fairbanks.com

NEMA 1 and UL Type 1 Wall-Mounting Kits For Its G-Series Drive Platform Siemens announced the availability of wall-mounting kits for its Sinamics G120C and G120 PM240-2 modular drives. These low-cost kits allow easy, fast installation of the drives and conform to NEMA 1 and UL Type 1 standards for interior applications. These wall-mount kits are designed in accordance with UL 61800-5-1 standards for AC drives. Available in power ranges from ½ to 200 hp and voltages from 230V to 690V, the kits offer streamlined, compact design for use with all drive frame sizes of the corresponding Siemens drive units.

For more information, visit www.industry.usa.siemens.com

Cortec® Coated Products Introduces EcoWeave Made from the same type of woven polyolefin film used to wrap lumber, EcoWeave® is extremely durable, yet lightweight and versatile.

EcoWeave® offers a combination of tear resistance, durability, and VpCI® chemistry that work together to provide protection against harsh outdoor elements, physical damage, and corrosion. Metal parts packaged in EcoWeave® receive continuous protection against salt environments, excessive humidity, condensation, moisture, aggressive industrial atmospheres, and dissimilar metal corrosion as the corrosion inhibitors vaporize and then condense on all metal surfaces inside the enclosed package. When unwrapped, the corrosion inhibitors evaporate, leaving the substrate corrosion-free and ready to use.

For more information, visit www.cortecpackaging.com 42 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

www.IndustrialMachineryDigest.com | Quarter 4, 2017 | INDUSTRIAL MACHINERY DIGEST

|

43

Grizzly Industrial Announces Grizzly Model G0828 You can get right to work with the Grizzly Grizzly Model G0828 Benchtop Metal Shear. It will handle up to 18-gauge sheet metal at a maximum width of 25�. It comes complete with two-sided upper and lower blades, adjustable gibs on the upper blade, a protractor stop, and front and rear adjustable stop scales. Weighing in at 286 lb., this little machine will provide the heft for great stability on the toughest jobs.

For more information, visit www.grizzly.com

Micromar 40 EWRi Wireless Digital Micrometer The new 40 EWRi micrometer is the latest addition to Mahr’s family of integrated wireless products, which includes digital calipers, indicators and depth gages, and which allows users to measure faster, more easily and more reliably. Measurement data is transferred to an i-Stick on a computer without any interfering data cables, and MarCom software makes data acquisition simple: just take a measurement and transmit measuring data directly into MS Excel or via a keyboard code into any Windows program or existing SPC application.

For more information, visit www.mahrexactly.com

Rasoma Machine Tools Now Available In North America From GMTA Now available from German Machine Tools of America (GMTA), a full line of Rasoma machining centers, including vertical turning centers, 4-axis shaft turning centers, end machining, double spindle and various special purpose machining centers, such as cross-hole drilling in crankshafts, with full automation is offered.

Machines for turning, milling, drilling with the possibility to combine with gear generating processes, are available in a variety of configurations and the GMTA application engineering team can assist interested parties to determine the best solution.

For more information, visit www.gmtamerica.com

44 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

www.IndustrialMachineryDigest.com | Quarter 4, 2017 | INDUSTRIAL MACHINERY DIGEST

|

45

New 3M™ DBI-SALA® Comfort Grip Working at height requires movement. Workers need to connect and reconnect their snap hooks dozens, or even several dozens of times, a day. Designed and certified to arrest a fall when loaded in multiple orientations, the Comfort Grip Connector helps provide a 5,000-pound tensile strength as well as up to 3,600 pounds in transverse and gate strengths. When connected to a vertical or transverse application, such as a pipe, the hand-guard pin shears in the event of a fall to allow the connector to align with the direction of the fall and remain securely anchored.

For more information, visit www.3m.com/workersafety

HONEYWELL LAUNCHES NEW CONNECTED GAS DETECTOR Honeywell’s new connected gas detector is designed to keep industrial operations safe while making set-up, maintenance and compliance reporting faster and easier by leveraging Bluetooth connectivity. The new Sensepoint XRL fixed gas detector monitors industrial operations for specific hazardous gases, such as carbon monoxide or methane. Unlike other fixed gas detectors, Sensepoint XRL is Bluetooth-enabled. When paired with an intrinsically safe smartphone available from Honeywell, a single worker can perform many standard maintenance tasks, including set-up, commissioning, and calibration wirelessly from up to 33 feet away.

For more information, visit www.honeywellsafety.com

46 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

47 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

Western Digital Corporation SanDisk Industrial SD and Micro SD New SanDisk Industrial SD and microSD cards, and SanDisk Industrial Extended Temperature SD cards (for trusted performance under extreme temperature conditions of -40oC to 85oC) are built with the high endurance and reliability that is paramount in the industrial and commercial industries, enabling them to consistently manage the challenging workloads of IIoT, commercial surveillance, medical and other intensive “connected” applications over extended periods of time.

For more information, visit www.sandisk.com

New Doosan Heavy Duty Vertical Turning Center Features ATC Doosan Machine Tools presents the new PUMA V8300 Vertical Turning Center with an automatic tool changer (ATC). The PUMA V8300 is a new generation 15-inch class vertical turning center with a larger work zone, increased rigidity and enhanced user convenience. It is available in right or left hand versions.

The PUMA V8300 offers the largest work zone in its class, with a maximum turning diameter of 830mm (32.7“), a maximum work height of 750mm (30”) and a swing-over-saddle of 740mm (29“).

For more information, visit www.doosanmachinetools.com

W. R. MEADOWS Announces New CLAY-TITE W. R. MEADOWS has recently added CLAY-TITE BENTONITE WATERPROOFING MEMBRANE, a dual layer waterproofing membrane consisting of virgin HDPE, sodium bentonite, and a protective layer consisting of a non-woven polypropylene, to its vast line of construction products. The HDPE in CLAY-TITE provides the first layer of waterproofing while the bentonite’s self-sealing capabilities ensure puncture protection under hydrostatic conditions. The additional of polypropylene fabric protects the bentonite on the job site and from direct shotcrete installation. Designed for use below-grade, CLAY-TITE can be used in both vertical and horizontal applications.

For more information, visit www.wrmeadows.com 48 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

DECEMBER 7–9, 2017 • INDIANAPOLIS, INDIANA USA Join racing suppliers and buyers from around the world at the 30th annual Performance Racing Industry Trade Show to discover the latest in motorsports products, technology and business opportunities.

NEW FOR 2017 • NEW EXHIBIT LOCATIONS • EXLUSIVE AJ FOYT EXHIBIT • FEATURED PRODUCTS SHOWCASE Learn more at www.pri2017.com

49 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

EZ-Puller Bar Puller With no necessary mechanical adjustment, the EZ-Puller bar puller has the benefit of one time setup that will never need adjustment. The X-axis end points are changed within the program when changing bar diameters. Bar size can be changed in mere seconds resulting in extreme repeatability with less material wasted per part. The Bar Puller from EZ-Puller has no gripping fingers that need to be adjusted or that can be lost or broken. It works on round bar (range: .93– 1.750), hex (range: .125 – 1.375), and square stock (range: .125 – 1.000), without spindle orientation.

For more information, visit www.ezpullerusa.com

Yaskawa Motoman GP25 Model The high-speed Motoman® GP25 robot is a new, compact robot that is ideal for assembly, dispensing, handling, material removal and packaging applications. All axis speeds have been increased, some over 40%, surpassing other robots in its class and delivering increased productivity. This six-axis model is the fourth in the GP-series line of robots. Its small footprint allows for minimum installation space and minimizes interference with peripheral devices. This allows it to be placed in close proximity to workpieces and other robots to create flexible, high-density layouts. The slim arm design and broad working envelope allow operation in wider work areas with the ability to delve deeply into the workspace.

For more information, visit www.motoman.com

U-Tec® Flexible Tool Adapter Offered On Right-Angle Heads Heimatec announced immediate availability of its popular U-tec® flexible adapter system on all right-angle heads in the company’s line. Models are now available for most popular lines of machine tools in the North American market, according to company President Preben Hansen. The company plans to include its U-tec® adapter system on all angle heads, going forward, according to Hansen. He notes this development will especially provide the system’s rigidity and quick-change capabilities to users doing deep hole drilling with extended tools. U-tec® allows a standard ER output live tool to accept various adapters for different applications.

For more information, visit www.heimatecinc.com

50 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

51 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

Enclosures for Robotics and Lab Automation from HEMCO EnviroMax Enclosures are designed to enclose robots and other lab automated processes by providing exhaust air systems or HEPA filtered clean workstations. Robots are beneficial in many applications, and are proven to increase efficiency and productivity. Robots integrated into existing facilities are shown to increase output, improve quality, while providing additional flexibility in the production process. Enclosures are built to protect robotic processes from contamination and personnel from hazardous fumes. Utilizing a flexible, modular design, Enclosures are engineered and built to exact customer size and design requirements.

For more information, visit www.hemcocorp.com

PrimeTurning™ from Sandvik Coromant Unlike conventional turning operations–which have remained largely unchanged for decades—PrimeTurning™ allows machine shops to complete longitudinal (forward and back), facing, and profiling operations with a single tool. The methodology is based on the tool entering the component at the chuck and removing material as it travels towards the end of the component. This allows for the application of a small entering angle, higher lead angle, and the possibility of machining with higher cutting parameters. Furthermore, conventional turning (from part-end to chuck) can be performed using the same tools.

For more information, visit www.sandvik.coromant.com

GlobalMAX 1530 Abrasive Waterjet The new GlobalMAX line is available exclusively through international distribution and incorporates two and a half decades of waterjet industry research and development. Like all OMAX waterjet systems, the pump, table and software in the GlobalMAX machines are designed, manufactured and tested as complete units at the OMAX headquarters in the USA. The product line features OMAX’s direct drive pump technology, easy-to-use software, and innovative drive technology.

For more information, visit www.omax.com

52 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

53 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

Creform AGV And Carts ‘Inject’ Life Into Plastic Injection Molding Operations Creform Corporation has designed and built a complete parts-handling system for an automotive supplier of injection molded parts. The system consists of a Creform BST AGV Model CA-A50060-NSI and Creform built carts. The AGV works as an automated tugger that runs along a 50 mm wide magnetic tape guidepath, slipping under stationary carts and then carrying the carts to designated stations. When one of the six parts-handling carts is full, the waiting AGV, towing an empty cart, is released into a robotic cell.

For more information, visit www.creform.com

Soft Grip Back Blow Safety Air Gun For Cleaning Inside Diameters EXAIR’s new Soft Grip Back Blow Safety Air Gun delivers a blast of air to effectively blow debris and liquids from pipe or hose inside diameters, channel, bores, holes, internal threads and other internal part features. The ergonomic design of the air gun keeps the operator’s hand in a comfortable position so it can be used for hours of continuous use without fatigue. An array of holes on the Model 1006SS Back Blow Air Nozzle provides a forceful back facing 360-degree airflow to clear out coolant, chips and light oils from machining processes.

For more information, visit www.exair.com

Chicago Pneumatic Launches New Grinders The new CP3330 and CP3340 series of industrial grinders are ideal for various applications in metal-working, fabrication, foundries, casting plants, shipbuilding and oil and gas applications. Equipped with powerful governed motors, these new industrial grinders can accomplish a superior material removal rate and reduce completion times. Additionally, these new vertical grinders from Chicago Pneumatic maximize operator safety featuring a unique over speed shut-off device that reduces the risks of abrasive-related incidents caused by air pressure fluctuations. The company is also introducing its CP3350 series, which includes angle grinders and angle sanders in addition to short and extended die grinders.

For more information, visit www.cp.com 54 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

KCD-MN1

KNe3G from KAPP NILES Efficient, easy to use, ergonomic and effective – that’s what the “e” is all about. The machine concept of the KNe3G comes with the new KNgrind software and HMI (Human Machine Interface) which means operator-friendly and machineoriented parameterization of the generating grinding task. The latest control hardware and a multi-touch screen technology from Siemens (Sinumerik 840D) will interactively guide the user through the input of workpiece and technology data.

The integrated measuring system of the KNe3G allows various alignments, analysis, and correction possibilities.

For more information, visit www.kapp-niles.com

Nozzle Bar® Air Blow-Off Device from Maxum With Maxum’s converging and laminar flow technology, air reaches the part in a stronger, faster, more concentrated form than slotstyle air knives, improving efficiency while slashing energy usage.

By matching pattern convergence from the superior penetration of nozzles, the Nozzle Bar can be customized to provide powerful blow-off force to reach deep cavities and varying part shapes and distances. It can dry complicated shapes using more air where it is needed, and less air where it is not, all from a single nozzle bar.

For more information, visit www.maxumair.com

Four Speed Pistol Grip Reversible Drills This new tool line of Industrial Quality Air Powered Reversible Drills are available in four Speeds; 450, 950, 1800 and 3700 RPM. The newly designed Pistol Grip Drills are designed with finger platforms on both sides of the tool, allowing increased stability and support. At .5 Hp, the tools include a 3/8” Chuck and feature a high torque air motor for countless applications.

Direction of the drill is reversed with a simple change of a switch. Each drill features a 3/8”-24 thread for added versatility.

Running at 90 PSI, the air powered drills feature a rear exhaust motor to direct debris away from the workpiece.

For more information, visit www.dynabrade.com 56 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

Cosen G320 with Mechalogix Cosen’s G320 is a rigid dual-column high production machine which incorporates a massive base, sturdy saw frame, a 5HP drive motor, and a user friendly programmable control. The Smart NC-100 technology is programmable up to 100 different jobs including quantity and length of cut with Automatic Multiple Indexing and Automatic Kerf Compensation. The Mechalogix monitoring system that’s pre-installed on Cosen’s G320 is a proprietary cloud-based technology that reveals sawing performance data in real time. This software can monitor the blade life, and accurately predict blade breakage, along with many other cost-saving features via its convenient mobile app.

For more information, visit www.cosensaws.com

Mastercam 2018 Router Focused on Efficiency and CNC Software announces the release of Mastercam 2018 Router.

Mastercam 2018 Router brings a new suite of programming tools focused on delivering speed, automation, and efficiency for all machining jobs. Mastercam Router gives your shop the best possible foundation for fast and efficient routing. From general purpose methods, such as optimized nesting and block drilling, to highly specialized toolpaths like 5-axis trimming, Mastercam Router delivers a comprehensive routing package to fit your needs. And, new to this release, Mastercam 2018 for SOLIDWORKS introduces support for Router.

For more information, visit www.mastercam.com

Hexagon Manufacturing Intelligence Releases PC-DMIS 2017 R2 Hexagon Manufacturing Intelligence has launched the PCDMIS 2017 R2, the latest edition of the world’s most popular measurement software. This is the second of two major releases scheduled for PC-DMIS in 2017, with continued service pack updates to ensure maximum reliability of the platform. PC-DMIS 2017 R2 introduces Slideshow for INSPECT software, allowing users to create unlimited customizable layouts with inspection results populated during measurement. INSPECT software was first introduced with PC-DMIS 2017 R1 in January 2017 as a simple front-end for PC-DMIS Measurement Routines.

For more information, visit www.hexagonmi.com

www.IndustrialMachineryDigest.com | Quarter 4, 2017 | INDUSTRIAL MACHINERY DIGEST

|

57

Modular VL Series from EMAG VL machines are part of EMAG’s modular standard series. As the term suggests, these machines are built on a common machine base but allow the use of an extremely wide range of technologies, similar to the modular platform systems seen in the automotive industry. There are now modular machines available for turning, gear hobbing, and chamfering processes; for grinding (chucked parts and shaft parts); for induction hardening; and also in special designs for laser welding or PECM technology. Essentially, they are available for virtually all the technologies offered by the EMAG Group.

For more information, visit www.emag.com

Workholding Solutions from RÖHM The modular CAPTIS workpiece clamping system provides a wide range of workholding options for turning, milling and drilling applications and features a forward-thinking quickchange capability that permits conversion from external to internal clamping in less than a minute. The system produces strong clamping forces without deformation of delicate workpieces while offering high repeatability and minimal runout. CAPTIS is compatible with the industry standard BZI collet interface. RÖHM’s DURO-NCSE accommodates large, workpiece-specific customized jaws and operators can offset, exchange or turn the jaws with minimal effort.

For more information, visit www.rohm-products.com

Epilog Laser Fusion 40 System he Fusion 40 offers laser operators a generous engraving table and wattage configurations up to 120. The design of the Fusion 40 was created to maximize engraving space, while maintaining the physical footprint of comparable laser systems with a smaller bed. The Fusion 40 includes the same features as its predecessor, the Fusion 32, including the redesigned motion control system that allows for higher speed engraving and amazingly precise cutting quality. Other features of the Fusion 40 include intuitive joystick control that allows operators to move the table, fire the laser directly and more.

For more information, visit www.epiloglaser.com 58 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

FEELPOWER TUBE LASER

FIBER LASER

AFFORDABLE YAG LASER SPECIAL PRICE 6" x 120" $124,000.00

STATE OF THE ART V GROOVER Hydrapower has developed advanced V Groover technology to meet increasing architectural manufacturing needs. Hydrapower has developed special tooling for thin material, thick material and special profiles.

Our V Groover can increase panel precision and quality, reduce costs,speed up delivery and improve the profitability of job shops competing for this work.

Hydrapower has established a Strategic Alliance with Dade Heavy Industries, (DHI) Melbourne, Australia. DHI will supply its Laser Cutting machines and the Hydrapower product line to the Australasian region from its new facility. Hydrapower will import the full range of machines from Australia to the Americas.

950 N Collier Blvd. Marco Island, FL 34145 Phone: (239) 642-5379 • Fax: (239) 642-4032 Email: Hydrapower@aol.com • Web: www.hydrapower-intl.com

IG 380 SD Surface Grinder

The IG 380SD provides the greatest capacity of all of the DCM grinders, it features a 36” diameter electromagnetic chuck with configuration features of through table vacuum, air or hydraulic clamping. The variable speed 30 HP grinding spindle provides exceptional grinding performance for both conventional and superabrasives. The IG 380SD is configured with a sliding door enclosure, air/mist filtration and swarf system with continuous filtering of the coolant. Clean coolant results in repeatable grinding performance. The automated grinding control simplifies machine operation and ensures consistent grinding results.

For more information, visit www.dcm-tech.com

H-22A Band Saw The H-22A is an automatic horizontal band saw from Hydmech provides accurate 90° metal cutting for heavy-duty applications.

The H-22A with its high speed shuttle feed indexing up to 34in a single movement. Its optional 6° degree canted head, recommended when cutting larger beams, structural steel, and bundles of square tubing allows for more efficient cutting and improved blade life. Featuring a 22 x 22 capacity, 10 HP motor, and 2 blade, the H-22A is a reliable choice for all your heavy-duty horizontal metal cutting applications.

For more information, www.hydmech.com

Wildeck “NetGate™” Pick Module Safety Gate Wildeck, Inc. has announced its new NetGateTM Pick Module Safety Gate which will transform open rack loading zones into protected, safe access areas by providing full height fall protection within the pallet zone. The NetGateTM utilizes an integrated cable/pulley system and is easy to install into new or existing rack structures (rack not included). When one side of the gate is lifted, the other closes, providing full height fall protection near the elevated ledge at all times.

For more information, visit www.wildeck.com

60 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

TMC4500DB for Rigorous Production Environments The TMC4500 DB, from Messer Cutting Systems, is a heavy-duty dual box-beam constructed gantry cutting machine, built to perform in your rigorous production environments. Finite Element Analysis (FEA) design methods assure that your TMC is up to the task of cutting with multiple plasma and oxy-fuel torches. Your TMC is customized to fit your cutting needs to improve your shop’s productivity. Torch options include vertical torches, Single and Triple Torch Oxy-fuel Bevel Units, and plasma beveling units with the unique compound Skew Rotator. The TMC4500 DB utilizes precision plasma, oxy-fuel, and drilling up to 4” diameter holes plus a wide variety of marking techniques.

For more information, visit www.messer-cs.com

Handheld Light Bar from Big Ass Solutions Big Ass Solutions has built the world’s toughest and brightest battery-powered LED work light. Its durable design makes it ideal mechanics, contractors, truckers, oil rig workers and first responders. Its ability to survive being doused and dropped also makes it the perfect work light for serious outdoor and auto enthusiasts.

The light bar features six distinct brightness settings, from 80 lumens to 5,000 lumens (more than any other battery-powered LED work light), a 180-degree light angle, and a high-capacity rechargeable battery that provides 1.5 hours of illumination at the brightest setting to 48 hours at the dimmest.

For more information, visit www.bigasssolutions.com

Flexion N2 from Epson A revolutionary new addition to Epson’s 6-Axis robot lineup, the Flexion N2 stands tall in a class of its own.

Featuring patented compact folding arm technology, this innovative robot offers significant advantages in efficiency of motion and workcell space reduction.

With the ability to operate in a tight space, the Flexion N2 can be utilized in production lines that traditional 6-Axis robots cannot. Designed with a smart new kinematic configuration, Epson’s Flexion N-Series robots, beginning with the Flexion N2, are redefining the 6-Axis robot category.

For more information, visit www.robots.epson.com

www.IndustrialMachineryDigest.com | Quarter 4, 2017 | INDUSTRIAL MACHINERY DIGEST

|

61

www.enmco.com

LCD Vibration Activated Hour Meter With Service Alerts

HOURMETER T56E

MADE IN THE U.S.A e-mail: customerservice@enmco.com

TOLL FREE 888-372-0465

www.enmco.com $24.00 40% off list price (Limited time promotional pricing) 5 other styles available

Electronics Customer Pre-settable LCD Timer

Series TB45

ENM’s Series TB45 is a pre-settable AC/DC hour meter. It features a 6 digit LCD with self-powered CMOS circuitry. The unit is powered by an internal lithium battery.

MADE IN THE U.S.A e-mail: customerservice@enmco.com

TOLL FREE 888-372-0465

READY Robotics’ TaskMate READY Robotics’ TaskMate system is a fully-integrated turnkey solution for machine tending that incorporates the UR robots.

READY Robotics is working to change the way customers approach robotic automation by providing a fully plug-and-play platform architecture allowing customers to easily build whatever automation system they need for a given application. By integrating with Universal Robots, READY Robotics are able to leverage tremendously useful robot hardware to further reduce the integration overhead customers and integrators experience in trying to address their automation application needs.

For more information, visit www.universal-robots.com and www.ready-robotics.com

Makino Present Next-Generation EDGE-Series The EDGE2 and EDGE3, to the U.S. manufacturing market.

Built for general precision machining applications, the EDGE2 and EDGE3, both electrical discharge machines (EDM) provide accurate and reliable performance for standard die/mold components or contract manufacturing with a space-saving design for shop floors of any size.

The EDGE-Series sinker EDMs feature an integral rise-and-fall work tank designed with excellent unobstructed access to the work zone for setups, which greatly improves visibility to monitor the machining processes.

For more information, visit www.makino.com

LCD T56 Hour Meter Series ENM Company introduces its new LCD Vibration Activated Hour Meter. The Hour Meter features 6-Digits with an hour glass icon as a running indicator. There is a jumper connector on the backside of the unit which can easily be removed in order to activate the hour meter. This meter can be installed anywhere on equipment with no special wiring connection or power source to operate. There is a magnet on the back for mounting on metal surface. The internal battery supplies all the necessary power for the gauge to operate for years of service.

www.enmco.com Go to www.enmco.com/L3L4promo and enter the promotional code L3L4promo for a 50% discount off the $40.00 list price.

For more information, visit www.enmco.com

Signode Introduces The Grippack Slb Signode has announced the release of the GripPack SLB: the world’s first battery powered combination tool for steel strapping. The Signode GripPack tools maximize mobility, productivity and consistency while adding significant safety enhancements. In addition to the new tool, GripPack announces the unveiling of its Signode GripPack mobile application, free on both IOS and Android devices. GripPack SLB is designed without the need for air hoses or compressors therefore creating more portability and producing less noise.

For more information, visit www.signodegroup.com

Self Powered LCD Counter/Timer

L3/L4 Series MADE IN THE U.S.A e-mail: customerservice@enmco.com

TOLL FREE 888-372-0465

Quarter 4 2017

Mention SBSDA2017 for a 10% Discount!

YES… WE HAVE THAT!

Denver Breaker & Supply One of the Nation’s Largest Inventory of NEW, Reconditioned, & Obsolete!

• Circuit Breakers • Panel Mount Switches • Motor Controls • Bus Duct Plugs • Transformers • Starters • and More!

WE SPECIALIZE IN THE TOP BRANDS & CARRY THE HARD-TO-FIND ITEMS

Providing Same Day, Next Day Air Shipments for Emergency Needs!

WE ALSO BUY YOUR USED EQUIPMENT…

CALL US TODAY!

855-4UR-BRKR

WWW.DENVERBREAKER.COM All Breakers are Insured and Guaranteed — All Material is Fully Load Tested.

Stay Connected

we want to buy your surplus or underutilized machinery!

We buy single machines or entire plants and are always looking for: • Late Model CNC Machines • Hardinge Machines • Fabricating Equipment • Toolroom Machinery

Email or call us today! sales@actionmachinery.com

610.691.6677

www.actionmachinery.com a leading distributor of Quality machine tools & fabricating eQuipment 2320 highland ave., bethlehem, pa 18020 (ph.) 610-691-6677 (fax) 610-694-0944

• TUBE BENDER REBUILDING • TUBE BENDER CONTROLLERS • PINES BENDER REPLACEMENT PARTS • CLARKE & LEWIS MACHINE REPLACEMENT PARTS

• ON SITE SERVICE/REPAIRS • MACHINE EVALUATIONS • NEW UTB CLARKE & LEWIS MACHINES • BUY / SELL / BROKER USED MACHINERY

MANUFACTURER’S REP • CNC HYDRAULIC TUBE BDNERS • TUBE END FORMING MACHINERY • TUBE BENDER REBUILDING • TUBE END FORMING REBUILDING

• ON-SITE REPAIRS • CONTROL UPGRADES • BENDER, END FORMING, END FINISHING TOOLING • TUBE FABRICATING LUBRICANTS

MANUFACTURER’S REP • TUBE BENDERS • LASER TUBE CUTTING • TUBE END FINISHING

• TUBE END FORMING • TUBE/BAR CUTTING • SAW BALDE PROCESSING

CALL US TODAY FOR A FREE CONSULTATION 810-844-0233

THE PERFECT LITTLE TOOL ROOM FURNACE • Extremely Uniform • Easy Lift Door Only $4,350 • Program Control Model GS1714 • 17"W x 14"D x 12"H

20 Kent Rd • POB 2129 • Aston PA 19014

877.846.7628 • www.llfurnace.com

EEL specializes in large and hard to find fittings. Stocking through 6” in most items.

EEL is a master distributor of Penn Union Corp. with the most extensive inventory on the East Coast.

Recyclers of Surplus Electrical Supplies

Buyers & Sellers of Electrical Supplies

Your source for hard to find electrical supplies and every day items at bargain prices!

CIRCUIT BREAKERS (NEW) GE - THQP, THQL, THQB, TEY, TED & MISC SIEMENS - BL, BQD, BQ, QJ, ED, FD, FXD, JD, JXD, HJD, PUSHMATIC & MISC CUTLER HAMMER - BAB, QBHW, GHB, ED, EHD, FDB, FD, HFD, HMCP & MISC SQUARE D - QO, QOB, EDB, EHB, FA, KA, LA, MA & MISC

CONDUIT & ELBOWS EMT - IMC - RIGID STEEL ALUMINUM PVC COATED GREENFIELD PVC SEALTITE THRU 6"

Phone: 215-236-1160 Fax: 215-235-5339 800-523-3818 www.eastelec.com CONDUIT BODIES

APPLETON - BRIDGEPORT CROUSE HINDS - KILLARTK OZ GEDNEY - RACO RED DOT - ROB ROY

CONDUIT FITTINGS

GREENFIELD/MC CONNECTORS

APPLETON - BRIDGEPORT CROUSE HINDS - OZ GEDNEY PLM - RACO - THOMAS & BETTS

LUGS & CABLE CONNECTORS

APPLETON - ARLINGTON BRIDGEPORT - CROUSE HINDS KORNS - MYERS - OZ GEDNEY RACO - THOMAS & BETTS

PENN UNION CORP - BURNDY DOSSERT - ILSCO - 3M THOMAS & BETTS

FUSES

PVC FITTINGS

BUSSMAN - CEFCO - EDISON FERRAZ SHAWMUT LITTELFUSE

CANTEX - CARLON - KRAYLOY

CABLE TIES

CUTLER HAMMER - GE SIEMENS - SQUARE D WESTINGHOUSE

PANDUIT - THOMS & BETTS

SAFETY SWITCHES

68 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

STRUT FITTINGS

B-LINE - GLOBE STRUT POWER STRUT - SUPERSTRUT UNISTRUT - VERSABAR

WIRING DEVICES

ARROW HART - BRYANT HUBBELL - KELLEMS - LEVITON PASS & SEYMOUR - WOODHEAD

MISCELLANEOUS

3M COLD SHRINK, TERMINATIONS & TAPE BEAM CLAMPS *MALLEABLE) BELL BOXES - BUS DUCT PLUGS CADDY - CADWELD - ENCLOSURES ERICSONS - LOCKNUTS PLASTIC BUSHINGS - STEEL CITY TRANSFORMERS

SELECT

EQUIPMENT

Industrial Electrical Sales MCC BUCKETS & MOTOR CONTROL CENTERS CUSTOM BUILT MCC BUCKETS • LARGEST INVENTORY IN THE MIDWEST!

WE CAN RETROFIT ANY MAKE AND MODEL OF MCC BUCKET WITH ALL NEW COMPONENTS INCLUDING VFD’S! SOFT STARTERS NEMA & IEC STARTERS

888-459-5191 • SALES@SELECTEQUIPMENT.NET SELECTEQUIPMENT.NET

AmCon Design & Contract Manufacturing Expos See Manufacturing’s latest cutting-edge technologies at any of our upcoming shows

Spring 2018 Schedule Seattle (Bellevue), WA February 19-20 Kansas City, KS April 3-4 Denver, CO April 24-25 Louisville, KY May 15-16 Orlando, FL May 22-23 FREE ADMISSION • FREE ATTENDEE PARKING • FREE SEMINARS • 3D Printing • Design • Engineering • Prototyping • Machining • Cutting • Grinding • Forming • Fabricating • Rubber • Plastics • Components • Castings • Molds • Tools • Dies • Patterns • Finishing • Assembly • Fixtures • Electronics...and much much more.

Register Today at www.amconshows.com, or just call 800-829-7467

IMD

IMD PREMIUM SUPPLIERS

PREMIUM SUPPLIERS

Actek Manufacturing & Engineering

1110 Fullerton Rd. City of Industry, CA 91748 Phone: 800-752-7229 Fax: 626-581-3423 sales@actekmfg.com www.actekmfg.com

AGMA – American Gear Manufacturers Association

1001 N. Fairfax Street Suite 500 Alexandria, VA 22314-1587 Phone: (703) 684-0211 Fax: (703) 684-0242 www.agma.org

Betenbender Manufacturing, Inc. 5806 Quality Ridge Rd. Coggon, IA 52218 Phone: 319-435-2378 Fax: 319-435-2262 sales@betenbender.com www.betenbender.com

Action Machinery Co., Inc.

2320 Highland Ave. Bethlehem, PA 18020 Phone: 610-691-6677 Fax: 610-694-0944 sales@actionmachinery.com www.actionmachinery.com

American Technical Publishers 10100 Orland Parkway, Suite 200 Orland Park, IL 60467 Phone: 800-323-3471 Fax: 798-957-1101 service@atplearning.com www.atplearning.com

AeroGo Co.

1170 Andover Park W Seattle, WA 98188 Phone: 1-866-537-0153 Fax: 206-575-3505 info@AeroGo.com www.aerogo.com

superior sawing technology

Behringer Saws Inc

721 Hemlock Rd. Morgantown, PA 19543 Phone: 610-286-9699 sawing@behringersaws.com www.behringersaws.com

Burr King Mfg., Co., Inc. 1220 Tamara Lane Warsaw, MO 65355 Phone: 800-621-2748 Fax: 660-438-8991 info@burrking.com www.burrking.com

72 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

C.H. Hanson

2000 N Aurora Rd Naperville, IL 60563 Phone: 800-827-3398 Fax: 800-827-5834 www.palmgren.com

IMD | 2017 | Premium Suppliers

Carell Corporation

Capital Recovery Group, LLC

34225 U.S. Hwy. 31 Stapleton, AL 36578 Phone: 251-937-0948 Fax: 251-937-0957 info@carellcorp.com www.carellcorp.com

1654 King Street Suite 9 Enfield, CT 06082 US Phone: (860) 623-9060 info@crgauction.com www.crgauction.com

Centra Corp

PO Box 645 White Marsh, MD 21162-0645 Phone: 410-945-0040 Fax: 410-945-0074 sales@centracorp.com www.centracorp.com

COMBi iFT

LIFTING INNOVATION

Combilift

303 Concord Street Greensboro, NC 27406 Phone: 877-COMBI-56 Fax: 336-378-8842 info@combilift.com www.combilift.com/us

YES… WE haVE that!

Cosen Saws USA

4527 Dwight Evans Rd. Charlotte, NC 28217 Phone: 877-SAWING-1 Fax: 704-943-1031 info@cosensaws.com www.cosensaws.com

PREMIUM SUPPLIERS

38 Cygnet Drive Carson City, NV 89706 Phone: 1-866-TheGage Fax: 775-246-5117 likeJerome@clamprite.com Us On Facebook for a 10% discount! www.clamprite.com

IMD

Clamprite, LLC

Innovation Backed By THE RIGHT

Denver Breaker & Supply

Dynabrade, Inc.

, Reconditioned, & Obsolete!

Denver Breaker & NEW Supply

8989 Sheridan Dr. Clarence, NY 14031 Phone: 716-631-0100 Fax: 716-631-2073 andy.mandell@dynabrade.com www.dynabrade.com

One of the Nation’s largest inventory of

•901 CircuitIronton Breakers • St. Panel Mount Switches • Motor Controls • Bus Duct Plugs Transformers • Starters • and More!

Denver, CO•80239

Phone:1-800-544-7375 WE SpECializE iN thE tOp BRaNdS & Fax: 303-431-0288 CaRRY thE haRd-tO-FiNd itEmS www.denverbreaker.com

providing Same day, Next day air Shipments for Emergency Needs!

ProfileMachines Bending Eagle Bending

Machines Heavy

to 3" Capacities in 15 Models, CNC & Ornam 34225 1" US-31 Stapleton, AL 36578 All work both Phone: 251-937-0947 Horizontal & Vertical Fax: 251-937-4742 sales@eaglebendingmachines.com www.eaglebendingmachines.com NEW ! Eagle DP7 Controls w/ Direct Radius Readout

WE alSO BUY YOUR USEd EqUipmENt…

Call US tOdaY!

855-4UR-BRkR Edwards Manufacturing Company 1511WWW.dENVERBREakER.COm North 26th Street PO Box 166

All Models In Custom Toolin

Stay Connected

Eastern Electrical Liquidators

all Breakers insured and Guaranteed — all material is Fully load tested.

Philadelphia, Paare19121 Phone:800-523-3818 Fax: 215-235-5339 burian@eastelec.com www.eastelec.com

Albert Lea, MN 56007 Phone: 507-373-8206 Fax: 507-373-9433 sales@edwardsmfg.us www.edwardsironworkers.com

Epicor Software Corp.

600 US-169 Suite 2000 Minneapolis, MN 55426 www.epicor.com

Look Us Online o (251)93

sales@carellcorp.com • ww

www.IndustrialMachineryDigest.com | Quarter 4, 2017 | INDUSTRIAL MACHINERY DIGEST

|

73

IMD AMERICAN AMERICAN MADE MADE AIR AIR QUALITY QUALITY SOLUTIONS SOLUTIONS Protecting Protecting People, People, Facilities Facilities and and Environment Environment

Essex Structural Steel Co., Inc. 607 607 Route Route 13 13 Cortland, Cortland, NY NY 13045 13045 Phone: Phone: 800-323-7739 800-323-7739 Fax: Fax: 607-753-6272 607-753-6272 sales@essexstructuralsteel.com sales@essexstructuralsteel.com www.essexstructuralsteel.com www.essexstructuralsteel.com

PREMIUM SUPPLIERS SUPPLIERS IMD PREMIUM

AMERICAN AMERICAN MADE MADE AIR AIR QUALITY QUALITY SOLUTIONS SOLUTIONS

Filter-1 Clean Air Consultants 2525 2525 National National Dr. Dr. Garland, Garland, TX TX 75041 75041 Phone: Phone: 972-278-2664 972-278-2664 Fax: Fax: 972-278-1810 972-278-1810 info@filter-1.com info@filter-1.com www.filter-1.com www.filter-1.com

GEHRING L.P.

24800 24800 Drake Drake Road Road Farmington Farmington Hills, Hills, MI MI 48335 48335 Phone: 248-427-3901 Phone: 248-427-3901 info@gehringlp.com info@gehringlp.com www.gehring.de/en-us www.gehring.de/en-us

H&K Equipment, Inc.

4200 4200 Casteel Casteel Dr. Dr. Coraopolis, Coraopolis, PA PA 15108 15108 Phone: Phone: 800-272-9953 800-272-9953 Fax: Fax: 412-494-0975 412-494-0975 cmckinney@hkequipment.com cmckinney@hkequipment.com www.hkequipment.com www.hkequipment.com

PREMIUM SUPPLIERS

AMERICAN AMERICAN MADE MADE AIR AIR QUALITY QUALITY SOLUTIONS SOLUTIONS Protecting Protecting People, People, Facilities Facilities and and Environment Environment

EXAIR Corporation

11510 11510 Goldcoast Goldcoast Drive Drive Cincinnati, Cincinnati, OH OH 45249 45249 Phone: Phone: 800-903-9247 800-903-9247 Fax: Fax: 513-671-3363 513-671-3363 orders@exair.com orders@exair.com www.exair.com www.exair.com

FDK3 Company

5918 5918 W W 34th 34th St St F F Houston, Houston, TX TX 77092 77092 Phone: Phone: (713) (713) 688-2272 688-2272 fdk3co@yahoo.com fdk3co@yahoo.com www.fdk3co.com www.fdk3co.com

AMERICAN AMERICAN MADE MADE AIR AIR QUALITY QUALITY SOLUTIONS SOLUTIONS

Formdrill USA Inc.

4118 4118 N. N. Nashville Nashville Chicago, Chicago, IL IL 60634 60634 Phone: Phone: 773-290-1040 773-290-1040 Fax: Fax: 773-290-1041 773-290-1041 info@formdrill-usa.com info@formdrill-usa.com www.formdrill-usa.com www.formdrill-usa.com

The Grieve Corporation

500 500 Hart Hart Road Road Round Round Lake, Lake, Illinois Illinois 60073-2898 60073-2898 USA USA Phone: Phone: 847-546-8225 847-546-8225 Fax: Fax: 847-546-9210 847-546-9210 sales@grievecorp.com sales@grievecorp.com www.grievecorp.com www.grievecorp.com

Haco-Atlantic, Inc.

11629 11629 N. N. Houston Houston Rosslyn Rosslyn Rd. Rd. Houston, Houston, TX TX 77086 77086 Phone: Phone: 281-445-3985 281-445-3985 Fax: Fax: 281-445-3989 281-445-3989 sales.tx@hacoatlantic.com sales.tx@hacoatlantic.com www.hacoatlantic.com www.hacoatlantic.com

| IMD | M | www QUARTER 2, 2017 .IndUsTRIAlM4, AchInERydIgEsT.coM | InUSTRIAL ACHINERY DIGEST | Quarter 2017 | www.IndustrialMachineryDigest.com 74 66

Glenn A. Winternitz, LLC

1401 1401 Lunt Lunt Ave, Ave, Elk Elk Grove, Grove, IL IL 60007 60007 Phone: Phone: 773-290-1827 773-290-1827 Fax: Fax: 773-866-9601 773-866-9601 glenn@winternitzauction.com glenn@winternitzauction.com www.winternitzauction.com www.winternitzauction.com

Grizzly Industrial, Inc 1821 1821 Valencia Valencia St. St. Bellingham, Bellingham, WA WA 98229 98229 Phone Phone 800-523-4777 800-523-4777 ord@grizzly.com ord@grizzly.com www.grizzly.com www.grizzly.com

HE&M Saw

PO PO Box Box 1148 1148 Pryor, Pryor, OK OK 74362 74362 Phone: Phone: 888-729-7787 888-729-7787 Fax: Fax: 918-825-4824 918-825-4824 info@hemsaw.com info@hemsaw.com www.hemsaw.com www.hemsaw.com

IMD

Hilco Industrial, LLC

Hildebrand Machinery Company

31555 W. Fourteen Mile Rd., Suite 301 Farmington Hills, MI 48334 Phone: 248-254-9999 Fax: 248-254-9995 info@hilcoind.com www.hilcoind.com

Hypneumat, Inc.

5900 W. Franklin Drive Franklin, WI 53132 Phone: 414-423-7400 Fax: 414-423-7414 info@hypneumat.com www.hypneumat.com

PREMIUM SUPPLIERS

• Large press bed to accommodate a variety of tooling other than just punching.

• Pump, motor, valve and reservoir are all easily accessible for maintenance.

• Large rectangular tubes used at base of machine to give safe, instant portability.

HYDMECH Group Limited We can build

YOUR COMPLETE AUCTION RESOURCE

Industrial Auction Services, LLC a custom

PO Box 1659 60 Liberty Ave. machine Woodstock, Ontario N4S0A9 for you!Metuchen, NJ 08840 Phone: 877-276-SAWS (7297) 848-229-2500 www.betenbender.com Fax: 519-539-5126 732-548-5251 info@hydmech.com sales@ind-auctions.com www.hydmech.com www.ind-auctions.com

With our user-friendly website, users can easily find the type of 5806they Quality Ridgefor, Road auction are looking Coggon, Iowa 52218 regardless of size or location. The site Phone: 319.435.2378 has the latest technology to make Fax: 319.435.2262 it simple for users to engage with an auction of interest.

Industrial Magnetics, LLC.

IMD

1385 M-75 Boyne City, Michigan Phone: 888-582-0823 Fax: 231-582-0622 imi@magnetics.com www.magnetics.com

Jergens, Inc

15700 S. Waterloo Rd. Cleveland, OH 44110 877-440-LIFT lifting@jergensinc.com www.jergensinc.com

HMI a Division of Betenbender

5806 Quality Ridge Rd. 2023 Black Bridge Road York, PA. 17402 C-Frame Presses Coggon, IA 52218 Phone: 319-435-2378 Phone: •717-846-2600 Heavy Gauge Steel Design Fax: 319-435-2262 Fax: 717-845-9497 • Press Bed bolted on, not welded, sales@betenbender.com to sales@hildebrandmachinery.com prevent distortion. www.betenbender.com www.hildebrandmachinery.com

Ipsen Inc. International Machinery Co. 1546 Cedar Street Ontario, CA 91761 Phone: 909-947-8888 intlmachinery@aol.com www.lionlathes.com

Jet Edge

12070 43rd St. N.E. St. Michael, MN 55376 Phone: 800-JET-EDGE Fax: 763-497-8701 sales@jetedge.com Subscribe now to receive FREE news on www.jetedge.com upcoming auctions!

984 Ipsen Rd. Cherry Valley, IL 61016 Phone: 1-800-727-7625 Fax: 1-815-332-4549 Sales@IpsenUSA.com www.ipsenusa.com

Jordan Craig Machinery Int’l. LLC 151 N. Main St. Ste. 203 New City, NY 10956 Phone: 845-398-0073 Fax: 845-398-0074 jc@jordancraigmachinery.com www.jordancraigmachinery.com

www.IndustrialMachineryDigest.com | Quarter 4, 2017 | INDUSTRIAL MACHINERY DIGEST

|

75

IMD

PREMIUM SUPPLIERS

WELDINGEQUIPMENT.COM HEAD & TAIL STOCK

Kanetec USA Corporation 140 West Devon Avenue Bensenville, IL 60106 Phone: 800-959-0449 Fax: 630-860-9443 kanetec@kanetec.com www.kanetec.com

WELDING MANIPULATORS

POSITIONERS

KEC, Inc.

KHK-USA

PO Box 3255 Spring, TX 77383 Phone: 713-694-1790 Fax: 713-694-1791 sales@weldingequipment.com www.weldingequipment.com

FLAT TURN TABLES

TURNING ROLLS

259 Elm Pl Mineola, NY 11501 Phone: 516-248-3850 info@khkgears.us www.khkgears.us

POSITIONERS

Kec Incorporated specializes in Tank Turning Rolls, Welding Positioners, Floor Turntables, Sub Arc Manipulators, Head and Tail stocks. We also have a large inventory of Radial drills, bandsaws and other machine tools.

We are a full stocking dealer with equipment from manufacturers such as Koike Aronson, Aronson, Ransome, Preston-Eastin, Profax, Pandjiris, H&M Pipe Bevelers, Gator Chucks by Fuerda, Lincoln Electric, Circle Welding Innovations, Weld Engineering, Jetline Engineering, Arc Products, Haco-Atlantic, Marvel (Armstrong-Blum), LJ Welding/ Automation, and Nederman.

IMD PREMIUM SUPPLIERS

Kec, is a leading supplier of all types of welding, fabrication and positioning equipment. We buy, sell, trade and rent new, used and rebuilt equipment. Our large in-stock inventory is constantly changing. Contact us for our purchase and rental puchase options!

Kec is family owned and operated with over 34 years experience.

L&L Special Furnace Co., Inc. 20 Kent Rd. Aston, PA 19014 Phone: 877-846-7628 Fax: 610-459-3689 sales@hotfurnace.com www.hotfurnace.com

Billing Address: P.O. Box 3255 • Spring, Texas 77383 Shipping Address: 321 North Loop East • Houston, Texas 77022 email: sales@weldingequipment.com • www.weldingequipment.com

Leading Marks, LLC

P: (713) 694-1790 • F: (713) 694-1791 • C: (281) 380-9607

KEC FP 0417.indd 1

736 West Ingomar Road, #707 Ingomar, PA 15127 Phone: 412-366-4733 Fax: 412-366-4744 laurie@leadingmarks.com www.leadingmarks.com

Lenzkes Clamping Tools, Inc. 5/8/17 1:36 PM

825 Radford St. Christiansburg, VA 24073 Phone: 540-381-1533 Fax: 540-381-4484 info@lenzkesusa.com www.lenzkesusa.com

MANUFACTURING COMPANY, INC.

Lubriplate Lubricants 129 Lockwood Street Newark, NJ 07105 Phone: 800-733-4755 Fax: 800-347-5329 www.lubriplate.com

Master Fluid Solutions

501 West Boundary Street Perrysburg, OH 43551-1200 Phone: 419-874-7902 info@masterchemical.com www.masterfluidsolutions.com

Machinesused.com

2410 Niagara Lane N, Suite 1 Plymouth, MN 55447 Phone: 763-745-1140 Fax: 763-745-1140 sales@machinesused.com www.machinesused.com

Melmor Associates

840 Ann Avenue Niles, OH 44446 Phone: 330-652-1784 Fax: 330-652-1667 melmor@melmor.com www.melmor.com

76 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

Marvel Manufacturing Company 3501 Marvel Dr. Oshkosh, WI 54902 Phone: 1-800-4SAWING Fax: 920-236-7209 marvelsales@marvelsaws.com www.marvelsaws.com

Muller LCS

3644 W. Lake Avenue Glenview, IL 60026 Phone: 1-800-OCTOPUS Fax: 1-847-657-4034 salse@mullerlcs.com www.mullerlcs.com

IMD

Multicam, Inc.

New England Gear Co.

1025 West Royal Lane Dallas, TX 75261 Phone: 972-929-4070 Fax: 972-929-4071 www.multicam.com

343 John Downey Dr New Britain, CT 06051 Phone: (860) 223-7778 jeff@newenglandgear.com www.newenglandgear.com

Phase-A-Matic, Inc

Plant & Machinery, Inc.

39360 3rd St. East, Suite 301 Palmdale, CA 93550 Phone: 800-962-6976 Fax: 661-947-8764 info@phase-a-matic.com www.phase-a-matic.com

1304 Langham Creek Dr. Ste. 454 Houston, TX 77084 Phone: 713-691- 4401 Fax: 713-672-7905 marthaj@pmi-auction.com www.pmi-auction.com

IMD

Professional Electrical Apparatus Recyclers League (PEARL) 10200 W. 44th Avenue Suite 304 Wheat Ridge, CO 80033 Phone: 720-881-6043 pearl@pearl1.org www.pearl1.org

AMS / Press Brake Safety

PO Box 511143 Punta Gorda, FL 33951 Phone: 941-637-6660 Jason@pressbrakesafety.com www.pressbrakesafety.com

RAS Machine Tool Technologies 30 Business Technology Dr. Belchertown, MA 01007 Phone: 413-323-9041 Fax: 413-323-9595 sales@rasmachinetool.com www.rasmachinetool.com

PREMIUM SUPPLIERS

Salinger Electric Co., Inc.

1755 E. Maple Rd. Troy, MI 48083 800-424-3690 248-585-4040 info@salingerelectric.com www.salingerelectric.com

Performance Racing Industry 31706 South Coast Highway Laguna Beach, CA 92651 Phone: 949-499-5413 Fax: 949-499-0410 mail@performanceracing.com www.performanceracing.com

Premier Asset Recovery Group 77 E. Palatine Road Prospect Heights, IL 60070 Phone: 312-280-1234 Fax: 312-280-1266 info@premierarg.com www.premierarg.com

Radwell International, Inc. 111 Mt. Holly Bypass Lumberton, NJ 08048 Phone: 800-332-4336 Fax: 800-257-2869 sales@plccenter.com www.radwell.com

Scotchman Industries

180 E Hwy 14 PO Box 850 Philip, SD 57567 Phone: 800-843-8844 Fax: 800-843-5545 info@scotchman.com www.scotchman.com

www.IndustrialMachineryDigest.com | Quarter 4, 2017 | INDUSTRIAL MACHINERY DIGEST

|

77

IMD

PREMIUM SUPPLIERS

Siemens Industry, Inc. Motion Control Business - Machine Tools Select Equipment Company

IMD PREMIUM SUPPLIERS

101 W North St Kokomo, IN 46901-2902 Phone: 888-459-5191 Fax: 765-459-0644 www.selectequipment.net

Stor-Loc Division of Ryan Metal Products

880 N. Washington Avenue Kankakee, Il 60901 Phone: 800-786-7562 Fax: 815-936-0767 www.storloc.com

Syclone ATTCO Service PO Box 458 Emmett, ID 83617 Phone: 800-475-9466 Fax: 800-973-3355 info@skyhookmfr.com www.skyhookmfr.com

TigerStop LLC

12909 NE 95th Street Vancouver, WA 98682-2426 Phone: 360-254-0661 Fax: 360-260-0755 www.tigerstop.com

390 Kent Ave. Elk Grove Village, IL 60007 800-879-8079 847-437-0784 cnc.us@siemans.com www.usa.siemens.com/cnc

Sunnen Products Company 7910 Manchester Road St. Louis, MO 63143 Phone: 800-325-3670 Fax: 314-781-2268 www.sunnen.com

The Electric Barn

121 Lafayette Road North Hampton, NH 03862 Phone: 603-964-7800 Fax: 603-964-7802 sales@electricbarn.com www.electricbarn.com

Trilogy Machinery, Inc.

PO Box 70 Belcamp, MD 21017 Phone: 888-988-ROLL Fax: 410-272-3601 sales@trilogymachinery.com www.trilogymachinery.com

78 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

Sprinter Marking

1805 Chandlersville Rd. Zanesville, OH 43701 Phone: 740-453-1000 Fax: 740-453-6750 sales@sprintermarking.com www.sprintermarking.com

SureTrac Systems LLC

81 Smith Corner Road Newton, NH 03858 Phone: 877-787-3872 www.suretracsystems.com

The Service Guys

626 East River Rd Anoka, MN 55303 Phone: 877-337-6875 Fax: 763-575-7002 chris@theserviceguys.net www.theserviceguys.net

Trim-Lok, Inc

6855 Hermosa Circle Buena Park, CA 90622 Phone: 714-562-0500 Fax: 714-562-0600 info@trimlok.com www.trimlok.com

IMD

PREMIUM SUPPLIERS

Russell, Holbrook & Henderson, Inc. Tru-Volte Gear Products 25 East Spring Valley Ave Maywood, NJ 07607 Phone: 201-226-9000 Fax: 201-226-9004 info@tru-volute.com www.tru-volute.com

U S Shop Tools

1340 S. Allec St. Anaheim, CA 92805 Phone: 800-243-7701 Fax: 800-342-3311 sales@usshoptools.com www.usshoptools.com

Ultimate Tube Bender Parts 3245 Sandpointe Drive Brighton, MI 48114-7500 Phone: 810-355-2004 Fax: 810-844-0234 dave@benderparts.com www.benderparts.com

Webb Corporation

402 E. Broadway P.O. Box 549 Webb City MO 64870 Phone: 417-673-4646 Fax: 417-673-4649 www.webbcorporation.com

Universal Robots USA, Inc.

11 Technology Drive East Setauket, New York 11733, USA Phone: 631-610-9664 ur.na@universal-robots.com www.universal-robots.com

York Portable Machine

1641 17th Avenue Campbell River, BC V9W 4L5, Canada Phone: 250-287-7716 Fax: 250-287-8362 sales@yorkmachine.com www.yorkmachine.com

IMD

smallmachine BIGRESULTS

Tormach Tech Days

Aug. 4-5

x

Prototype New Ideas Without the Wait

x

Cut Real Metal

x

120VAC - Plug in Anywhere

x

CNC Mill Starting at $4950

TORMACHTECHDAYS.COM

Tormach_IMD_TTD_4.24.2017.indd 1

PM www.IndustrialMachineryDigest.com | Quarter 4, 2017 | INDUSTRIAL MACHINERY4/24/2017 DIGEST12:41:12 | 79

C O M PA N Y

Actek Manufacturing & Engineering www.actekmfg.com

Action Machinery Co., Inc www.actionmachinery.com

AeroGo Co. www.aerogo.com

AGMA www.agma.org

Air Turbine Technology, Inc. www.airturbinetools.com

Air-Vac Systems www.air-vacsystems.com

AKS Cutting Systems www.akscutting.com

Allied Power Products, Inc www.alliedpower.com

AmCon Shows www.amconshows.com

American Technical Publishers

www.atplearning.com

Attica Hydraulic Exchange www.ahx1.com

Behringer Saws Inc www.behringersaws.com

Betenbender Mfg. Inc. www.betenbender.com

Burr King Mfg. Co. www.burrking.com

C.H. Hanson www.palmgren.com

Capital Recovery Group, LLC www.crgauction.com

Carell Corporation www.carellcorp.com

Centra Corp. www.centracorp.com

Clamprite, LLC www.clamprite.com

COLE-TUVE Inc. www.coletuve.com

Combilift USA www.combilift.com/us

Cosen Saws USA www.cosensaws.com

Coxreels www.coxreels.com

Darex www.darex.com

DCM Tech, Corp. www.dcm-tech.com

Denver Breaker & Supply www.denverbreaker.com

Design-2-Part www.d2p.com

Dynabrade, Inc. www.dynabrade.com

e-Black Solutions www.e-blacksolutions.com

Eagle Bending Machines www.eaglebendingmachines.com

Eastern Electrical Liquidators www.eastelec.com

Edwards Manufacturing Co. www.edwardsironworkers.com

Ensitech-Tig Bush www.TigBrush.com

Epicor Software Corp. www.epicor.com

Essex Structural Steel Co., Inc. www.essexstructuralsteel.com

EXAIR Corporation www.exair.com

FDK3 Company www.fdk3co.com

Filter-1 www.filter-1.com

Formdrill USA Inc. www.formdrill-usa.com

GEHRING L.P. www.gehring.de

Gilman Precision www.gilmanprecision.com

Glenn A. Winternitz, LLC www.winternitzauction.com

The Grieve Corporation www.grievecorp.com

Grizzly Industrial, Inc. www.grizzly.com

H&K Equipment, Inc. www.hkequipment.com

Haco-Atlantic, Inc. www.hacoatlantic.com

HE&M Saw www.hemsaw.com

Heritage Global Partners www.hgpauction.com

Hilco Industrial, LLC www.hilcoind.com

Hildebrand Machinery Company www.hildebrandmachinery.com

| BUYER’S GUIDE LISTINGIMD & | 2017 LINKS

HMI div of Betenbender Manufacturing www.betenbender.com

Hydra Service, Inc. www.hydraservice.net

Hydrapower Int’l Inc. www.hydrapower-intl.com

Hypneumat Inc. www.hypneumat.com

IMDauctions.com www.IMDauctions.com

IMTS www.imts.com

Industrial Magnetics, LLC. www.magnetics.com

International Machinery Co. www.lionlathes.com

Ipsen,Inc www.ipsenusa.com

Jergens, Inc www.jergensinc.com

Jet Edge www.jetedge.com

Jordan Craig Machinery Int’l. www.jordancraigmachinery.com

Kanetec USA Corporation www.kanetec.com

KEC, Inc. www.weldingequipment.com

Keytroller LLC www.keytroller.com

KHK-USA www.khkgears.us

Koster Industries, Inc. www.kosterindustries.com

L & L Special Furnace Co., Inc. www.llfurnace.com

Leading Marks, LLC www.leadingmarks.com

Lenzkes Tools Inc www.lenzkesusa.com

Lubriplate Lubricants www.lubriplate.com

MachineTools.com Inc www.machinetools.com

Machineused.com www.machinesused.com

MacMillin Hydraulic Engineering Corporation www.macmhydraulic.com

Marvel Manufacturing Company www.marvelsaws.com

Master Fluid Solutions www.masterfluidsolutions.com

Melmore Associates www.melmore.com

Messer Cutting

www.messer-cs.com

Muller LCS www.mullerlcs.com

Multicam, Inc. www.multicam.com

National Institute for Metalworking Skills, Inc. (NIMS) www.nimsready.org

New England Gear Co. www.newenglandgear.com

Professional Electrical Apparatus Recyclers League (PEARL) www.pearl1.org

Performance Racing Industry www.performanceracing.com

Phase-A-Matic Inc www.phase-a-matic.com

Plant & Machinery, Inc. pmi-auction.com

Premier Asset Recover Group www.premierarg.com

AMS / Press Brake Safety www.pressbrakesafety.com

Prime Machinery, Inc. www.primemach.com

Radwell International, Inc. www.Radwell.com

RAS Machine Tool Technology www.rasmachinetool.com

Royal Products/ Curran Mfg Cor www.mistcollectors.com

Salinger Electric Co., Inc. www.salingerelectric.com

Stor-Loc Division of Ryan Metal Products www.storloc.com

Suhner Industrial Products www.suhner.com

Sunnen Products Company www.sunnen.com

SureTack Systems www.SureTracSystems.com

Syclone ATTCO Service www.skyhookmfr.com

The Electric Barn www.electricbarn.com

The Service Guys www.theserviceguys.net

TigerStop LLC. www.tigerstop.com

Tormach www.tormach.com

Trilogy Machinery, Inc. www.trilogymachinery.com

Trim-Lok Inc www.trimlok.com\

Tru-Volute Gear Products www.tru-volute.com

U S Industrial Machinery www.usindustrial.com

Ultimate Tube Bender Parts www.benderparts.com

Universal Robots USA,Inc. www.universal-robots.com

US Shop Tools www.usshoptools.com

Webb Corporation www.webbcorporation.com

Yaskawa America

www.motoman.com

York Portable Machine www.yorkmachine.com

Schweiss Bi-Fold www.schweissdoors.com

Scotchman Industries www.scotchman.com

Select Equipment Company www.selectequipment.net

Siemens Industry, Inc. www.usa.siemens.com/cnc

SME www.sme.org

Sprinter Marking, Inc. www.sprintermarking.com

80 | InUSTRIAL MACHINERY DIGEST | Quarter 4, 2017 | www.IndustrialMachineryDigest.com

“Learn more about each Buyer’s Guide listing on www.indmacdig.com

NDMACDIG.COM IIndustrIal MachInerydIgest.coM

MONTH YEAR JUNE 2017