SPARKS Magazine Autumn 2019

AUTUMN 2019

YOUR CLASSROOM COMPANION

INSIDE...

SPECIAL FEATURE: APPRENTICE OF THE YEAR HALL OF SHAME WHAT’S IN YOUR TOOLBAG? WITH ALEX JONES

THE ONLY MAGAZINE FOR STUDENT & APPRENTICE ELECTRICIANS

Loop test with confidence

The all-in-one installation tester with confidence built-in

MFT1741 With the newest, patented pending algorithm for earth loop impedance testing, Megger introduce the MFT1741. ¢ Fast, repeatable 3-wire no–trip loop test results on normal circuits ¢ 3-wire loop test results from noisy circuits that are repeatable and in which you can have confidence. ¢ Built–in confidence meter that indicates the reliance you can place on your loop measurement ¢ Results unaffected by RCD or RCBO impedance These new features combined with those of the well liked MFT1701 series of toughness, ease-of–use and reliability make the MFT1741 a very attractive package.

To find out more scan the QR code or call 01304 502 102 Megger Ltd, Archcliffe Road, Dover, CT17 9EN, T. 01304 502101

MANAGING EDITOR: CELIA MATTHEWS celia.matthews@sng-publishing.co.uk EDITOR: PHIL WILKINSON-JONES editor@sng-publishing.co.uk DIGITAL EDITOR: TOM TRACEY tom.tracey@sng-publishing.co.uk GRAPHIC DESIGNER: LEE OWEN design@sng-publishing.co.uk TECHNICAL CONTRIBUTOR: Mike Davies

The autumn term is here and we’re full of optimism for the academic year ahead…

Y

ou may be new to college and just starting your electrical course, or maybe you’re settling back into college life after the summer break. Either way, welcome to SPARKS Magazine, your course companion.

ADVERTISING: PATRICK BLORE & ZOË TANNER sales@sng-publishing.co.uk PRINTERS Stephens & George, England

GENERAL ENQUIRIES To subscribe to SPARKS Magazine call 0121 767 1891 or subscribe online at www.sparks-magazine.co.uk

DISCLAIMER SPARKS Magazine is published by SNG Publishing Ltd (SNG).

All content and artwork is © SNG Publishing Ltd or its contributors and SNG is a trade mark of SNG Publishing Ltd. No part of SPARKS Magazine may be copied, transmitted or published in any form or by any means without prior permission.

Although SNG has made every effort to ensure the accuracy of this publication, it does not verify any claims or other information appearing in the advertisements contained in SPARKS Magazine. It therefore cannot accept any responsibility whatsoever for consequences that may arise from the content or artwork contained in SPARKS Magazine, including any errors or omissions or any opinions or advice given therein.

This publication and its content is not a substitute for professional advice on a particular matter.

Advertisements are accepted for publication in SPARKS Magazine only upon SNG Publishing Ltd standard terms of advertising.

SPARKS is the only magazine made just for electrical students and apprentices –

it’s put together with you in mind. We talk to electricians who know what it’s like to be starting out in the industry and there’s plenty to get your brain working including spot the difference and a fill in the gaps exercise.

We love it when you get in touch with us on social media, whether it’s over Facebook, Twitter, Instagram, Snapchat, LinkedIn or even YouTube. And there’s always plenty going on over on our website, where you’ll find the latest electrical news, competitions and more.

In the New Year, we’ll once again be on the road for the SPARKS Apprentice of the Year competition. It’s great experience for students and a fantastic way to kick-start your career.

All the best for the academic year ahead. Make the most of all the opportunities that come to you and we’ll see you soon.

Celia Matthews Managing Editor

SEARCH FOR SPARKS MAGAZINE © SNG Publishing Ltd, 2019

CONTENTS 16

FEATURES 01 Editor’s Note 04 News 06 Digital Column and #FixPix

27

09

SPARKS Apprentice of the Year 2020

14 The ECS Card 15

20 Questions with SparkyNinja

16 Through the Keyhole: Burnley College 19

Business Skills with Luke Wichard

23 Electrical wholesalers 27

The power of lighting

31 Starlight Connect smart lighting

35

35

Cables: Dos and Don’ts

36 Save time with Swiftclip 38

Fire safety with Firefly clips

42 AM2: What’s it to you?

43

Tool up for success

44 What’s in your toolbag? With Alex Jones

23

46

Bosch wall scanner

48 Free safety lockout kits in Scotland 51

Checking earth leakage currents

53 The 18th Edition and Inspection & Testing 54 App-rentice 66 Hall of Shame

02

SPARKS I AU TU MN 2 0 1 9 I C ON T EN T S

28 44

31

68

14

53

41

46

36

66 EXERCISES

25

12 Fill in the gaps 25

FType Downlight

34 Label the diagram 56

Electric cables

60 Discharge lighting 62

Luminaires and lighting

64 Power and hand tools

C ON T E N T S I AU TU MN 2019 I SPA RKS

03

LATEST NEWS READ THE FULL STORY IN THE NEWS SECTION OF

SPARKS-MAGAZINE.CO.UK APPRENTICES DRIVING BUSINESS GROWTH Apprentices are more than worth the money it costs to train them, new research shows.

The Electrotechnical Skills Partnership (TESP) said companies that recruit apprentices can see a return on investment in year two at higher charge-out rates, and in year three at the lowest rates. The research found that by the end of year four, apprentices created a net total benefit of between £11,400 and £56,700.

TESP chair Ruth Devine said: “Although it is a commitment, which can be daunting to small businesses, investing the time and resource into apprenticeships will ultimately drive business growth.”

TRADE SKILLS 4U OPENS NEW CENTRE IN COVENTRY Trade Skills 4U is to open a new training centre at Westwood Business Park in Coventry.

The electrical training provider has been training electricians from across the country since 2005 at its centres in Crawley, Warrington and Leeds.

Students can now book on to a range of courses including City & Guilds diplomas, Domestic Installer Packages and Inspection & Testing.

Carl Bennett, chairman and founder of Trade Skills 4U said: “I am extremely excited with the opening of the new centre. We have conducted a lot of research in the area to ensure that this is the perfect location to run our courses from.”

04

SPARKS I AU TU MN 2 0 1 9 I N E WS

COLLEGE GETS EQUIPMENT BOOST FROM SCHNEIDER ELECTRIC When Schneider Electric contacted Warrington & Vale Royal College’s Dave Love, he didn’t expect to receive ‘more than £90,000’ of products for students.

But that’s what happened! Now, thanks to this donation – which arrived on eight pallets – the students have access to the most up-to-date equipment in the industry.

Schneider Electric had been contacted by the e5 group who had visited the college earlier in the year.

Deepak Sharad of Schneider Electric said: “I was so happy that we have been given an opportunity to provide such equipment to the students.”

ELECTRICAL CONTRACTORS SHOW FALL IN REPORTABLE ACCIDENTS The accident rate among electrical contracting businesses fell in 2018.

New figures show the rate of RIDDOR-reportable accidents fell to 164 per 100,000 employees, with no fatalities reported last year. The rate of specified (major) accidents was also lower than in 2017.

The main causes of injury were falls, slips and trips and there was one reportable injury caused by electric shock.

Steve Brawley, chief executive of the Joint Industry Board, said: “The rate of reportable accidents in our industry continues to fall, and it means that the rate of these accidents is now, remarkably, only slightly more than 10% of what it was in 2001.”

ELECTRICAL ENGINEERING STUDENTS WIN HS2-INSPIRED COMPETITION Electrical engineering students from Birmingham have won a competition based around the development of HS2.

Five first year Level 3 students from South & City College Birmingham were tasked with redesigning Birmingham New Street Station and improving the onward journey for passengers travelling through the city.

The students were given an insight into HS2 at Birmingham’s High Speed Rail College and after pitching their proposal to a panel of expert judges were awarded first place in the Fast Trackers 2019 programme.

The winning students will now get the opportunity to work with mentors from Network Rail and Mott MacDonald.

SOMERSET SPARK ANSWERS DIY SOS A Somerset-based electrician has praised local tradespeople for helping out on an episode of DIY SOS. Matt Francis, of NICEIC-registered M Tech Ltd in Bridgwater, was among the trades who helped create a two-storey extension for a family of five in Weston-super-Mare.

He led the electrical design and installation work on the nine-day project after volunteering his company’s services at a registration event earlier in the year.

“There was a bit of pressure to get it done in time,” said Matt. “But everyone got involved and there was such a good buzz on site.”

The episode is due to air on BBC One this year.

N E W S I AU TU MN 2019 I SPA RKS

05

DIGITAL COLUMN

BY TOM TRACEY, DIGITAL EDITOR

A rising number of installers are taking to Instagram to showcase their best work.

All social media platforms have their benefits, which you can use to your advantage. Twitter is great to speak with and get advice from others in the industry, while Facebook offers your customers the option to message you and find out your details.

Instagram, though, is the ultimate social media platform to show off your portfolio.

Instagram helps 80% of users to decide whether to buy a product or service - you can use this to your advantage. Here’s how you can make the most of it and get business through the platform.

1 2 3

Post your finished work looking its best customers won’t be able to resist! You can post a carousel, to show the progress made through the job, but be sure to post your finished photo as the first photo, as this will show on your feed.

Always put a location on your post and use regional hashtags, e.g. #newcastleelectrician, so that any potential customers searching in that area may come across you more easily.

Make sure your bio describes your business and the services you offer.

We’d love to repost pictures of your work on our own Instagram - tag us in with #FixPix.

GET IN TOUCH!

#FIX Everyone loves a good wiring pic. If you’ve worked on something epic, make sure you take a photo and tag us on social media with #FixPix so that you can get the recognition you deserve!

X

FUN FACTS cable derwater power and The longest un ng s (577.5 km) lo s. is 358.84 mile nd rla ay with Nethe connects Norw

The first plug and socke t in England was reportedly introduced by T. T. Smith in 1883.

According to Zap-Map, there are now more than 9,000 public electric charging poin ts in the UK.

ctrical circuit The longest human ele rticipants in consisted of 1,315 pa Australia in 2015.

adium in ham Hotspur St The new Totten h which retractable pitc London has a lighting ned by ar tificial . can be maintai r up to five days while stored fo

Britain In May 2019, eek w ll fu went a coal g in without us time st fir e power - th .

2 8 8 1 since

The largest parade of elec tric cars included 402 vehicles in Denmark, which became a Guinness Wor ld Record in 201 6.

word ‘electricity’ in The first mention of the English came in 1646.

#F I X PI X I AU TU MN 2019 I SPA RKS

07

mBox L32 Wiring Centre, Part No. 60362958

HW

ST9400A/C

1 2 3 ROOM STAT T6360B

ORANGE

V4043H

BLUE

MOTOR

BROWN GREY

E

N

L

BOILER

E

N L PUMP

C 2

9

BLUE

1

1 2 3 ROOM STAT T6360B

E

Drawing number - 51011 Revision - Pre02 Date - 06/09/18 Drawn by - P Wilks

L

BOILER

ST9400A/C GREY ORANGE

ORANGE

V4043H

N

Drawing number - 51012 Revision - Pre01 Date - 06/09/18 Drawn by - P Wilks

E

N L PUMP

1

L641A

FOR MORE WIRING INFORMATION PLEASE REFER TO MANUAL OR WWW.KTECHMANUFACTURING.CO.UK

N

8

HW OFF

GREY

L

6

NEUTRAL

7

L

HTG

FOR MORE WIRING INFORMATION PLEASE REFER TO MANUAL OR WWW.KTECHMANUFACTURING.CO.UK

EARTH

HW VALVE

SWITCH

MOTOR

5

NEUTRAL

2

V4073A MID POSITION ZONE VALVE

HTG VALVE

SWITCH

BLUE

9 BROWN

MAINS IN 230 VAC 3 AMP 50 HZ

1

4

N

C

L641A

HTG

8

EARTH

3

LIVE

2

1

WHITE

7

CYLINDER STAT

'Y' PLAN

3

HW ON

6

NEUTRAL

GREEN/YELLOW

5

NEUTRAL

MAINS IN 230 VAC 3 AMP 50 HZ

4

LIVE

CYLINDER STAT

'S' PLAN

221 Series 4mm² 32A/450V

THE MBOX L32 WIRING CENTRE Easy - lever operated connectors offer simple and fast connections!

Fast - faster installs allow for more jobs within the day, or more time at home!

Safe - spring automatically adjusts to ensure optimum connection!

Visit www.wago.ltd.uk for more information

Search for WAGO Limited #WeConnect

2020

Official Tool Sponsor

APPREN OF THE YEAR 2020

Do you have what it takes to compete against the best electrical apprentices in the country?

The regionals heats of the SPARKS Apprentice of the Year competition take place between January and March, with Level 2 and 3 students from more than 80 colleges taking part across eight regions – the South West, South East, North West, North East, Midlands, Wales, Scotland and Northern Ireland.

SPARKS Apprentice of the Year is now in its 11th year and we’re excited to be including Scotland as one of our regional heats for the first time.

The winners of the regional heats will go on to compete at the grand final, which will take place at Schneider Electric’s impressive Innovation Hub in Coventry.

As well as the prestige of winning the competition, there are prizes worth up to £10,000 up for grabs, with every competitor getting a certificate for taking part.

The SPARKS Apprentice of the Year grand final will take place at Schneider Electric’s impressive Innovation Hub in Coventry.

10

Last year’s winner was Ben Kidner, a third-year apprentice at Bridgwater and Taunton College. Ben qualified for the final as the best runner-up but despite being the self-confessed underdog, he impressed the judges and did enough to win the overall competition.

Ben’s advice to those thinking of entering this year? “Definitely take it up, it’s a big confidence booster and I’ve seen the results. I’ve seen the improvements since day one, especially with the extra hours you do practising.”

Sean Miller, electrician channel programme manager at Schneider Electric, said: “We are proud to be helping the electricians of tomorrow as they start out on their journey. It’s always great to see the apprentices working with our products throughout the regional heats and the final, as the standard of work is very high.”

If you think you’ve got what it takes to follow in the footsteps of our previous winners, head over to www.sparks-magazine.co.uk to sign up. We can’t wait to see you all when the competition gets underway in the New Year.

SPARKS I AU TU MN 2 0 1 9 I AOY 2 0 2 0

#SPARKS AOY20

“Prizes worth up to £10,000”

NTICE 2019 WINNER Ben Kidner

Official Tool Sponsor

“The SPARKS Apprentice of the Year competition is an incredible showcase of young electrical talent”

TEST YOUR KNOWLEDGE

LIGHTING switch 30 mA RCD

In the most recent version of the Wiring Regulations

(BS

)

a

7671

requirement to provide

30mA RCD

luminaires within domestic (household) premises was introduced. The use of a

additional one protective

protection on all circuits containing

is used for

protection in most

circumstances. However, they can also be used for

protection

where required.

two switch Loop

When designing lighting circuits there are a number of factors that need to be

three

taken into consideration. Obviously, the usual design calculations for cable and

fault

devices etc. but also some additional consideration for the

1

location of switches that could have a significant impact on the cost and the 2 conventional conversion

time spent installing circuits.

There are a number of methods that can be used to install lighting circuits. To

more

start with you need to decide how you are going to supply the luminaires. The

intermediate

two methods commonly used are

2

taken directly to the

L3

plate method, where the supply is and the

L4

supply is first taken to the

conventional

and then a

plate method, where the

terminal in the ceiling rose or light fitting

wire run between the light fitting and the switch.

conversion

> ONE-WAY LIGHTING CIRCUIT When installing a lighting circuit where it is required to operate the luminaire

older not required

from only

regulations

The 1-way switch will have a common terminal (C) and an L1 terminal. Some

Neutral two 1

12

location a

-way switch will be required.

manufacturers mark these terminals as L1 (common) and L2. The BS symbol for a

-way switch is

SPARKS I AU TU MN 2 0 1 9 I T E S T YO UR KN OWL E DGE

.

The following important information on lighting circuits has been provided by the IET. See if you can fill in the gaps with the words listed below:

> TWO-WAY LIGHTING CIRCUIT When installing a lighting circuit where it is required to operate a luminaire from two separate locations

-way light switches will be required. The terminals found in a

-way

switch are common (C) L1 and L2. Some manufacturers mark these terminals as L1 (common) L2 and L3. There are two methods commonly used to wire a lighting circuit, they are the method (conduit method) and the for a 2-way switch is

method. The BS symbol

.

> INTERMEDIATE LIGHTING CIRCUIT When installing a lighting circuit that is intended to operate a luminaire from more separate locations you will need at least one

or

switch and two

and

www.theiet.org

Go to sparks-magazine.co.uk to download exercise answers for free

-way switches. The terminals usually found in an intermediate switch are L1, L2,

T E S T YOU R KN OWL E DGE I AU TU MN 2019 I SPA RKS

13

. There are two methods commonly used to wire an intermediate lighting circuit,

they are the

method (conduit method) and the conversion method. The BS

symbol for a 2-way switch is When working on

and the BS symbol for an intermediate switch is

.

installations you may come across lighting circuits that do

not have a CPC. The customer can be advised that it is installation to comply with current

to update the

providing that it was in compliance with the

at the time of installation. However, the customer should be advised of the possible risks that may be present as a result of having no CPC and that installing a CPC would enhance the safety of the circuit.

Some manufacturers now provide a

(N) terminal in their switches which makes it

easier for the installer when installing lighting circuits using the

plate method and for

some modern switches that require a neutral to function properly.

PROVE YOUR SKILLS WITH THE ECS CARD Whatever stage you’ve reached in your apprenticeship, you’re probably already thinking about your future, when your dedication to work and training are rewarded with a fulfilling job and growing bank account!

P

roving what skills and qualifications you’ve achieved is essential during your apprenticeship and your working life - whether it’s to allow you access to construction sites, or to progress throughout your career.

The ECS Card provides this proof for you. Holding an ECS Card shows that your skills and qualifications have been checked and verified by the Electrotechnical Certification Scheme. It’s the only card scheme for electrotechnical operatives in the UK that’s partnered with CSCS, and it’s recognised and endorsed by the electrical industry.

the JIB. If not, they can still register you with the JIB or you can apply for one at any stage of your apprenticeship.

Once you’ve got your card, download the MyECS app to show your virtual ECS card with pride!

> ECS APPRENTICE CARD You may well already have received your first ECS Apprentice Card if your training provider registers you with

14

SPARKS I AU TU MN 2 0 1 9 I Q UAL IF ICAT IO N S

> ECS GOLD CARD Once you complete your training, you can receive your ultimate ECS gold card - this becomes your employment ‘passport’ and shows that you are trained to the Level 3 industry standard. If you have, or when you gain, the 18th Edition Wiring Regulations qualification, you can apply for ECS Registered Electrician status.

Your college or training provider will be able to give you more information, so ask them about the JIB and ECS cards. You can also visit the ECS website for more information.

Good luck with your apprenticeship!

For more details visit: www.ecscard.org.uk

QUESTIONS

David Watts is the mastermind behind YouTube channel SparkyNinja. He offers help with electrical training, UK regulation and design, and more.

His videos reach more than 13,000 subscribers with more than three quarters of a million views. u sing a duet Who would yo ne? uld pick anyo with, if you co el George Micha

?

Best dish that you cook n co ba h Mac and cheese wit

w?

Favourite song right no deon Ma & n so bin Shelter – Porter Ro

What’s your go to takeaway?

Indian, but I don’t do very hot food

Most prized possession?

My competence, I can feed and shelter my family with it

Starter or dess ert?

Depends on th e star ters…

If you weren’t an electr ician, what would you be?

A video game developer

Cats or dogs?

Dogs the biggest Who has been ur career? influence on yo things ill trying to do My dad. He’s st ise d has helped ra the right way an e industry standards in th

Favourite band ?

Wham!

If you could have a superpower, what would it be?

Teleportation (I’m always fashionably late)

Worst haircut you’ve ever had?

I haven’t had a proper haircut in over ten years!

Furthest you’ve travelled?

In the car, over 740 miles in a single day ro und trip

Favourite sand wich?

Coronation Chi cken

What is your party trick? hand Knowing BS 7671 like the back of my

er done?

Scariest thing you’ve ev after a il na Drilled into my finger d under oo (bl subungual hematoma it! try the nail) – don’t

Ultimate holid ay destination?

New York with just the wife an d not the darling children

Ketchup – cupboard or fridge?

Fridge!

Most famous person yo u’ve met?

The Queen

SparkyNinja

Favourite tool? rmal One I can’t afford – a the least imaging camera with at 320 x 240 resolution

THE KEYHOLE

THROUGH

BURNLEY COLLEGE

David Lord with Zack Duxbury at the SPARKS Apprentice of the Year event

Ever fancied having a look behind the classroom and workshop doors at another college? In this issue, we look through the keyhole at Burnley College, which offers Advanced Vocational programmes as well as Themis Apprenticeships.

“Themis apprentices are at the heart of many highly-regarded businesses”

Y

ou can be assured of a warm welcome from head of construction David Lord, who leads a team of highlyskilled, industry-expert tutors and trainers at Burnley College and Themis, and helps to motivate the SPARKS Apprentice of the Year winners of tomorrow.

Themis Advanced Electrical Installation Apprentices and Burnley College students have industry-standard spaces, fitted out with the very latest technology to perfect their skills.

The electrical workshops are always a hive of activity and are led by friendly and approachable tutors and Themis trainers who have years of experience in the industry.

Themis and Burnley College are proud to work in close partnership with a wide range of awardwinning and highly-regarded local and national employers. Themis apprentices are at the heart of many of these businesses and are the next generation of skilled construction professionals and leaders in their chosen trades.

The Construction and Future Technologies Centre at Burnley College underwent a huge transformation in 2018. It is the perfect location for the electricians, builders, plasterers, painters, decorators and joiners of tomorrow to work on developing their practical skills and knowledge under the guidance of expert tutors and Themis trainers.

Burnley College’s Intermediate and Advanced Apprenticeship in Electrical Installation sees students carrying out specified connections on electrical wiring systems and equipment and ensuring safe electrical site working, implementing safe site working practices.

The course covers the inspection, testing and commissioning of an electrical installation, the preparation, positioning and fixing of electrical wiring systems and the diagnosis and correction of electrical faults.

The acquisition of functional skills valued highly by employers is an integral part of the apprenticeship and apprentices undertake the AM2 test at the end of the programme to assess their practical knowledge.

www.burnley.ac.uk T H ROU G H T H E KE Y H OL E I AU TU MN 2019 I SPA RKS

17

KNIPEX Quality – Made in Germany

Wire Rope Cutter

Article No. 95 62 160 > For wire rope with Ø 4.00 / 1960 Nmm² > Compact, light and powerful > Up to 30 % less physical effort compared to wire rope cutters of the same length > Double-mounted box joint design for high level of stability > Cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC > Convenient work thanks to opening spring

For more details please contact: Contact UK North: Mr Jason Cunningham 07340191555 Contact UK South West: Mr Richard Beesley 07770898298 Contact UK South East: Mr Jamie Nolan 07810128404

www.knipex.com

BUSINESS LUKE SKILLS: WICHARD

PART 2

Following on from his interview in the Summer issue of SPARKS, Luke Wichard tells us how he makes the most of marketing, personal and business growth and the online world to better himself and his business, My Trusted Electrician.

SPARKS Magazine: What’s the best way to maximise your time?

Luke Wichard: That’s easy - plan.

Write down a list of what needs doing and what needs doing first.

I use a mixture of apps but the best is Trello. Chuck your ‘to do’ items in there the second they pop into your head.

SPARKS: How do you market your business?

LW: I use leaflets, local community magazines, Google Maps listings for my website, Checkatrade, Facebook and my van signage to reach local homeowners.

It’s important to advertise in multiple places.

SPARKS: How do you set goals and go about achieving them?

LW: Imagine where you want to be when you retire. Have a finishing line to focus on.

Create small achievable milestones to reach each year.

SPARKS: How do you continue learning?

LW: I love YouTube. You used to only get one shot at college before the real world, but now we have all this information at our fingertips and it’s free. I drive a lot and have

“It’s important to advertise in multiple places”

discovered that audiobooks are a perfect opportunity to learn. If you drive for only one hour a day, that’s five hours a week which you can be learning.

SPARKS: How do you use the internet to boost your business?

LW: I use Facebook to interact with customers and provide helpful content. Hopefully, they’ll think of me first when they need an electrician.

I use YouTube for quotations. For example, if I’m quoting to rewire a kitchen then I will attach a YouTube video about rewiring a kitchen with my quote.

SPARKS: What is one tip you would give to your younger self?

LW: Learn how to run a business and how to market. Don’t assume that it’s not important and that you will pick it up as you go along. Even if you’re good at your trade it’s not enough to make the phone ring.

HOT TIP LEARN HOW TO RUN A BUSINESS AND HOW TO MARKET

My Trusted Electrician

BU SI N E S S SKI L L S I AU TU MN 2019 I SPA RKS

19

WANT TO BE IN THE TRADE BUT NOT ON THE TOOLS? If so, an apprenticeship in electrical wholesaling with Electric Center, the UK’s market leading distributor, could be for you!

Are you enthusiastic, motivated and interested in joining a team that plays a vital role in the electrical industry?

An apprenticeship with Electric Center will give you a great foundation for a future career in the dynamic and fast paced world of electrical wholesale distribution.

To find out more email: sparks@electric-center.co.uk or visit www.electric-center.co.uk/careers Alternatively, why not drop by your local Electric Center branch and take a look around?

Find your nearest Electric Center by downloading our easy to use Branch Locator App. Search ‘Electric Center’

SPOT THE DIFFERENCE

Go to sparks-magazine.co.uk to download exercise answers for free

Spot the ten differences between these two photos of a Schneider Electric circuit board.

HAS CHANGED TO

SAME GREAT PRODUCTS ONE GLOBAL BRAND 20 Years of Brand Recognition Within Trade Renowned Quality, Reliability & Service Number One Choice for Contractors & Specifiers One Brand, One Catalogue, One Website

S M A R T

C O N N E C T E D

S O L U T I O N S

auroralighting.com/gb/news

ELECTRICAL WHOLESALERS

WHAT TO LOOK FOR WHEN CHOOSING A SUPPLIER “Some Electric Centers offer evening deliveries or overnight lock up collection”

HOT TIP AGREE A SET OF DISCOUNTED TRADE TERMS WHEN YOU SET UP YOUR ACCOUNT

A good wholesaler should be able to provide the branded products you trust. There are also some great own label products available such as those supplied by Electric Center as part of its Acel range. They are made by top manufacturers and clients can’t price-check them online.

> PRICING

A

Price is always a factor in any purchase. Sit down with your electrical wholesaler to discuss the type of products you will need and agree a set of discounted trade terms when you set up your account.

> TRUSTED PRODUCTS

> KNOWLEDGEABLE AND HELPFUL STAFF

You may hear electricians talk about the importance of being able to ‘fit and forget’ – once you’ve completed a job, you don’t want to be called back to fix or replace products you’ve installed.

You may need to rely on the staff at your wholesaler for a bit of help every now and again. They may also be able to advise on the best products for a job or suggest viable alternatives.

s an installer, it’s important to have a wholesaler you can trust. But what should you look for when it comes to choosing the ones you want to work with?

> STOCK AND DELIVERY You want your wholesaler to have a good range of equipment and accessories in stock – with the ability to source and supply the things they don’t have quickly and efficiently.

Some Electric Centers open early in the morning or late into the evening to meet customer needs and some offer evening deliveries or overnight lock up collection.

Electric Center has 118 branches across the UK and prides itself on providing great customer service, flexible delivery options and quality products. It is the gold sponsor ofthe SPARKS Apprentice of the ear competition.

Check out www.electric-center.co.uk

WH OL E SA L E RS I AU TU MN 2019 I SPA RKS

23

E X T E N D E D L E D F I R E R AT E D D O W N L I G H T R A N G E FType FType Dim2Warm FType Wall Switch Colour Change

F-ECO Fixed and Adjustable

Element Premium Fixed, Adjustable, Regressed

Ftype Adjustable

Meet the family.

Luceco’s focus on fast fit solutions, flawless functionality and maximum energy savings make the FType Fire Rated Downlight family perfect for both new build and retrofit applications.

Integrated dimmable driver and speedfit loop in/out terminals allow for fast and simple installation.

Available in both 6W and 8W, the FType downlight uses the latest Samsung LED chips to deliver 100 lumens per watt, making it one of the most efficient fire rated downlight ranges on the market.

For more information on the range, visit www.luceco.com/uk/ftype

www.luceco.com

@lucecoplc

@lucecogroup

FT YPE

TEST YOUR KNOWLEDGE

FL AWLE S S FUNCTIONALIT Y

FT YPE Correctly label the parts on the FType Downlight: A Frame B Driver Housing C Lens D Spring Clip E Bezel F LED Chips G Heat Sink

TIN

WI

T YPE LI G H

Explain the different IP ratings and where each should be used:

AC K GP

N

AN F

IP20 IP44 IP65

Explain the difference between a watt and a lumen:

Don’t miss out.

For your chance to win simply answer the questions and send your answers to admin@sng-publishing.co.uk Three lucky winners will be selected at random and notified via email by 30th November 2019.

Terms and conditions apply.

For more information on the range, visit www.luceco.com/uk/ftype T E S T YOU R KN OWL E DGE I AU TU MN 2019 I SPA RKS

25

BY SIGNIF Y

THE POWER OF LIGHTING Interact Pro with Philips Interact Ready luminaires has been installed in the Innovation Room at TATA Steel’s headquarters in North Wales.

“TATA Steel now delivers its most innovative systems through lighting”

> COST EFFECTIVE The new system has provided the company with a quick and cost-effective connected lighting installation. It provides effective lighting control to allow the creation of an impactful ambiance for the customers who visit to learn about the latest innovation in the steel industry.

“Our innovation room is an important space where we showcase the best of our work, so it is important that we have an equally sophisticated, connected lighting system but one that our employees can operate with ease,” said Jason Wilkes, electrical engineer, TATA Steel.

> QUICK INSTALLATION Interact Pro uses a wireless network to connect luminaires, sensors and switches. This means that it is much easier to install than many existing

lighting control systems and doesn’t require additional cabling, making the process swifter. Users can quickly set up the connected lighting system via the Interact Pro app. The Interact Pro system has been so well adopted by TATA Steel’s employees that the light switches put in place are no longer needed – meaning that light is only used when required and reduces overall energy consumption.

“From early consultations we knew Interact Pro with Philips Interact Ready luminaires was a system that would help TATA Steel make an impact with customers to reflect its innovation,” said Stuart Jolley, trade and specification director for Signify in the UK and Ireland. “We look forward to continuing the partnership in the future to continue to deliver the most innovative systems through lighting.”

LIGHTING

> ENERGY SAVING The Interact Pro system has put TATA Steel employees in control by letting them tailor light levels according to their requirements.

It allows them to customise scenes and schedules through easily tapping the Interact Pro app, facilitating the productivity and well-being of employees.

Also, it ensures that the lighting in the room is only used when it is needed, significantly reducing energy costs.

Register for training at www.interact-lighting.com/pro I AU TU MN 2019 I SPA RKS

27

VAN GUARD PIPE CARRIERS Protect your pipes at a price you can afford Large range of Pipe Carriers manufactured Aerodynamic design & built from durable aluminium Choice of capacities depending on your carrying requirements Available in 2m & 3m lengths with bespoke lengths up to 6 metres Popular lined option available to protect conduit & trunking - ideal for electricians Include fully integrated locking mechanism Crash tested to capacity

MADE FOR THE TRADE View our range of van accessories www.van-guard.co.uk

Call our UK Customer Service line 01392 368351

When is it acceptable to work on live supplies?

See if you can get this one right from our quiz ‘Inspection, testing, commissioning and certification of electrotechnical systems by Megger’

Never

Always

For testing

For repairs

Play this quiz, and many more, on our website

www.sparks-magazine.co.uk/learning-resources

Free training Register now Meet Interact Pro: connected lighting for commercial and industrial buildings that works with Philips Interact Ready lamps and luminaires.

All commissioned from your phone without control wiring.

Register today to receive free training and you'll receive a voucher for a free gateway on your first project.

Register at www.interact-lighting.com/pro Works with Connected lighting

STARLITE

Hub-free smart lighting designed with installers in mind

“Choose from 16 million colours or 64,000 shades of white”

T

amlite Lighting has partnered up with Wiz Connected to launch the Starlite Connect range of downlights, bulbs and LED tape.

Starlite Connect lighting products sync directly to phones, tablets and voice assistants – including Google Home, Amazon Echo and Siri – without the need for an additional gateway or hub.

You can connect quickly and simply using wifi or Bluetooth, meaning users can get creative with their home within 30 seconds.

> EASE OF INSTALLATION Starlite Connect downlights, bulbs and tape have been designed with installers in mind.

No smart system training is required to set up the Starlite Connect system. With a simple product design and no hub to install, sparks can fit the luminaires in the same way they fit standard fixtures.

The commissioning can then be done post-installation by the user.

Starlite’s 24-hour tech support means that customers can raise any commissioning queries with them, not with the contractor. This means electricians can get into the smart lighting industry without the need for smart lighting training, providing the ultimate ‘fit and forget’ solution.

> PAINT WITH COLOUR Starlite Connect lights come with an option of either Tunable White, providing 64,000 shades of white, or RGB, which includes over 16 million colours to choose from in a variety of combinations, allowing users to light their house, their way.

> MORE THAN JUST LIGHTING Starlite Connect works with IFTTT (If This Then That), allowing the lighting in the home to work with other connected devices, creating an immersive living environment that is brought to life by the lighting.

IFTTT works with other connected devices such as your phone, doorbell, smoke alarm or heating system, changing the colour of the lighting to red for an emergency, blue for when the pizza arrives, or a tailored lighting scene ready for when you get home.

Check out www.starlite.co.uk

L I G H T I N G I AU TU MN 2019 I SPA RKS

31

ULTIMATE

Correctly label the parts on the Ultimate 60 perimeter trunking:

1

Go to sparks-magazine.co.uk to download exercise answers for free

> END CAPS (1)

> PROFILE (5)

Moulded end caps provide a neat finish to a run of trunking, ensuring all cables are contained safely.

Ultimate 60 end caps have screw fittings for added security.

With dimensions of 150mm x 60mm, Ultimate 60 has large cable capacity and is ideal for use in CAT6, CAT6a and CAT7 cable installations. Despite its high capacity, Ultimate 60 has a sleek and contemporary design.

> SCREW FITTING (2) The majority of fittings for Ultimate 60 are designed with screw fixings for additional security.

All screw fittings are covered with a removable screw cap. > INTERNAL CORNER (3) Adjustable internal bend allowing movement of +/- 5ยบ, whilst allowing for a true 50mm bend radius to be maintained. These flexible bends ensure that the installation is neat and tidy even where surface irregularity appears. > PRE DRILLED BASES (4) The pre drilled base in Ultimate 60 provides ease and speed of installation.

34

> SOCKET AND MOUNTED BOXES (6) Ultimate 60 will comfortably house either 25mm, 35mm or 50mm socket mounting boxes, available in either one or two-gang. > LIDS SUPPLIED LOOSE (7) Both top and bottom lids are supplied loose with the trunking body to speed up the installation process.

1

Ultimate 60 will comfortably house which socket mounting boxes? a) 25mm b) 35mm c) 50mm d) All of the above

2

Answer:

It comes in which of these lengths?

a) 2m b) 3m c) 5m

> EXTERNAL CORNER (8)

d) All of the above

Adjustable external bend allowing movement of +/- 5ยบ, whilst allowing for a true 50mm bend radius to be maintained. These flexible bends ensure that the installation is neat and tidy even where surface irregularity appears.

SPARKS I AU TU MN 2 0 1 9 I CAB L E M AN AG EM E N T

Answer:

For more product information visit: www.schneider-electric.co.uk

CABLES PROVIDED BY BASEC

DOS & DON’TS

Even cables that are sourced responsibly are at risk during initial delivery and installation. During this phase, they will be subjected to movements, stresses and strains - and if these exceed the cable design limits, damage becomes a strong possibility.

“Maximum cable tension and sidewall pressure limits can both cause damage if exceeded when pulling cables”

> BEND RADIUS – ARMOURED CABLES Bend radius is a key consideration, particularly for armoured cables and for higher voltages of 11kV or more. It should be communicated by manufacturers and passed on by suppliers to the installers.

Maximum cable tension and sidewall pressure limits can both cause damage if exceeded when pulling cables.

To prevent this, cable installation routing should be closely assessed, and several rollers or guides used at any bend points. > BEND RADIUS – SCREENED CABLES With screened cables such as BS 7629-1-rated fire alarm types, the minimum bend radius must be maintained to ensure fire integrity.

Kinks in the screening or overtight entry into accessories may compromise fire performance. > CABLE PULLING Problems can occur where cables are pulled in two directions from a common mid-point. This approach can cause significant damage to a cable that cannot twist freely during installation, or where loops of cable introduce twists.

Here are some top tips for a clean, trouble-free installation: > CABLE DELIVERY AND CUTTING TO LENGTH Safe handling of cable starts with the supplier, often a distributor or wholesaler.

Manufacturers will deliver cables on an appropriately-sized drum or reel, loaded under controlled factory conditions. Cutting the cable to length, and redrumming onto an often-smaller delivery drum can result in over-bending if the drum belly diameter is too small.

Avoiding cable torsion when pulling is important, and is largely addressed by using rotating pulling heads and a suitable cable pulling sock.

Tension built up around each bend will propagate back down the cable, causing issues nearer the drum.

Competent and experienced cable installation teams, using the correct equipment including tension-monitored winches, pulling socks, and a generous quantity of rollers and guides, should experience fewer problems while ensuring a trouble-free installation.

Read the full version of this article on the BASEC website www.basec.org.uk CABL E M A N AGE M E N T I AU TU MN 2019 I SPA RKS

35

SAVE TIME

WITH SWIFT

The Swiftclip, which forms part of Legrand UK’s Swifts cable tray range, has been designed with speed in mind. Requiring no tools during installation, the Swiftclip not only significantly reduces the number of components required, but also ensures cable management installation times of at least four times faster than a nut and bolt solution.

> FIVE SIMPLE STEPS: Connecting the Swiftclip couldn’t be easier. Here, Mark Williams, lead marketing manager for Legrand’s cable management business unit, demonstrates an installation in just five simple steps:

> STEP ONE: INITIAL SET-UP

01

Ensure the cable tray supports are placed in the relevant location before you begin.

> TOP TIP

When designing a cable management installation, cable ladders, cable trays and their supports should be strong enough to meet the total load requirements of the cable management system. Ancillary items such as light fittings or junction boxes should be taken into consideration as well as the cables and any predicted future additions.

> STEP TWO

02

Place a straight length of cable tray across the supports. Ideally the joint should be a quarter of the span of the cable tray from the support for maximum strength.

Place the next straight length of cable tray across the next supports and position the coupler centrally over the tray joint.

36

SPARKS I AU TU MN 2 0 1 9 I CAB L E M AN AG EM E N T

> STEP THREE

03

Place the Swiftclip between your thumb and index finger and insert the joggled head through the aligned tray and coupler slots.

> STEP FOUR

04

Pass each leg of the Swiftclip through the tray and coupler slots, starting with the leg nearest to the tray wall.

Repeat process on the other side of the tray, fitting the clip in the opposite direction. Ensure the head and feet of the Swiftclip are clamping through the tray and coupler and that the Swiftclip spans across the joint.

> TOP TIP Swiftclip can be used not only to connect length to length, or length to fitting, but can also be used to secure the bed of the tray to the supports (trapeze hangers/cantilever arms etc).

> STEP FIVE: SWIFTCLIP INSTALLATION COMPLETE

05

The Swiftclip is compatible with the existing Swifts medium (MRF) and heavy duty (SRF) cable tray systems, is load-tested to BS EN 61537 and provides earth continuity without the need for additional components. In addition, the innovative cable management component is available for internal pre-galvanised and external postgalvanised applications.

For more info on Legrand’s range of cable management solutions check out: www.legrand.co.uk or call

0345 605 4333

CABL E M A N AGE M E N T I AU TU MN 2019 I SPA RKS

37

FIRE SAFETY WITH FIREFLY Nick Hayler, technical and product QA manager from cable management manufacturer MarshallTufflex, explains why product selection is vital to ensuring compliance. > STAY UP-TO-DATE

> THE FIREFLY RANGE

Falling, hanging and trailing cables present a serious risk in the event of a fire, not only as they may hinder occupants trying to evacuate, but also for the emergency services entering the building. The updated BS 7671:2018, Regulation 521.10.202 - which came into effect January 2019 - now requires cables to be adequately supported against premature collapse in the event of a fire. This applies throughout the installation, and not just in escape routes.

Fire clips are required to ensure that cables are held up in the event of a fire. But what should you be looking for when choosing fire clips?

Marshall-Tufflex has recently extended its Firefly range, in line with the updated requirements, so it includes clips that are suitable for use on its entire range of PVC-U trunking systems. The clips fix to walls or ceilings and, with their spring-loaded design, are quick and easy to install. Thoroughly tested,

“The Firefly fire clips are fire resistant above 1000°C for up to 120 minutes”

the Firefly fire clips are fire resistant above 1000°C for up to 120 minutes, and feature rounded ends to prevent damage to cables and injury to installers.

The range includes both internal versions that can be installed within the trunking prior to cable installation and externally fitted variants for a simple retrofit to ensure an existing installation is compliant.

HOT TIP WORKING WITH MANUFACTURERS EARLY ON CAN SAVE YOU TIME, ENSURING THE CORRECT SOLUTION IS CHOSEN

To find out more visit: www.marshall-tufflex.com

38

SPARKS I AU TU MN 2 0 1 9 I CAB L E M AN AG EM E N T

Mercedes-Benz Approved Used Vans Know exactly what you’re getting into.

When you’re just starting out in your career, it’s good to know that someone’s got your back. So, when the time comes to look for a vehicle, you can be reassured to know that Mercedes-Benz Approved Used vans offer the same commitment to quality and workmanship as new.

No older than 6 years Fewer than 150,000 miles on the clock Full service history Minimum of 3mm tread depth on all tyres 12-month MOT Up to 24-months warranty

Discover more about our Approved Used vans at mbvans.co.uk

†BUSINESS USERS ONLY. Qualifying vehicles only.

Mercedes-Benz Approved Used Vans Mechanical Breakdown Insurance Corrosion warranty renewal Free 24/7 MobiloVan roadside assistance† 10 day exchange period Mercedes PRO connect vehicle management tool with every van Complimentary 7-day insurance cover

MAIN ATTRACTION FOR APPRENTICES

PUNCH ABOVE YOUR WEIGHT WITH OUR 18V RANGE. Bosch Professional 18V System.

Start on the front foot with the performance, ease of use and compatibility of our Professional 18V System. All Bosch Professional 18 volt batteries work across our extended tool range, for a ‘lightweight’ toolkit. With the knockout power of ProCORE18V in your corner too, you’ll be a true contender.

Find out more at: www.bosch-professional.com/gb/en/apprentice

It’s in your hands. Bosch Professional.

MYSCHNEIDER

ELECTRICIAN COMPETITION

WIN A WISER HEAT KIT & AMAZON ECHO DOT

Don’t miss out on this exclusive offer from Schneider Electric – only for SPARKS readers!

Wiser Heat is the easier, smarter, better way to personalise home heating. Adjust the temperature in individual rooms with the smart radiator thermostats, and control the system from anywhere in the world via an intuitive mobile app. Or if you don’t even want to lift a finger, you can ask Amazon Alexa to change the temperature for you! As well as increased comfort and convenience, you’ll also benefit from reduced heating bills due to more efficient energy usage.

HOW TO ENTER… SIMPLY VISIT www.schneider-electric.co.uk/electricianpartner to find out more and start your journey with us! Use promo code SPARKSWISER on the registration form before Monday 2nd December 2019 to enter this fantastic prize draw.

Good Luck! mySchneider Electrician portal is a free online hub with everything you need in one place, from training and business advice to product exploration through virtual reality and videos.

41

H IP I AU TU MN 2 0 1 8 I C O M PE T I T IO N

C OM PE T I T I ON I AU TU MN 2019 I SPA RKS

41

AM2

WHAT’S IT TO YOU?

Get help preparing for your AM2 from NET

D

id you know, at the end of your electrical apprenticeship you’ll need to take the AM2 or AM2S test, or the FICA in Scotland, before you can become fully qualified?

What does this mean? Think of it as similar to a driving test – you spend weeks or months learning how to drive, then the driving test is where you put everything into practice and you are marked against strict criteria.

“The AM2 covers installation, fault– finding, safe isolation, inspection & testing”

“The AM2 and AM2S are 16-hour tests split over two-and-a-half days” > IN-DEPTH ASSESSMENT The AM2 and AM2S are just like this – it’s an in-depth assessment where you have to carry out specific tasks to show what you have learned during your apprenticeship. The whole test is around 16 hours long, split over two-and-a-half days, and it’s broken down into different sections such as installation, fault-finding, safe isolation and inspection & testing.

Strict exam conditions are in place during the assessment, so this means no electronic devices or getting help from anyone else. You’ll be monitored by an assessor, who

will be marking your work as the day progresses.

Once you pass the assessment, it’s one of the final pieces of the puzzle to completing your apprenticeship and becoming a fully qualified electrician.

HOT TIP USE NET’S SELF-ASSESSMENT CHECKLIST TO ENSURE YOU’RE READY TO TAKE THE TEST

> AM2 OR AM2S? Your training provider will tell you which assessment you’ll be taking: the AM2, or AM2S. This just depends on which type of apprenticeship you’re following.

Check out www.netservices.org.uk/candidate-guidance or www.fica.org.uk

42

SPARKS I AU TU MN 2 0 1 9 I AM 2

It’s really important that you don’t take the test until you’re 100% ready. The NET website has a selfassessment checklist that lists everything you need to do. Use it during the last few months of your apprenticeship, talk to your employer and training provider and make sure you’re comfortable with all areas of the test so you’re fully prepared before booking.

TOOL UP FOR

SUCCESS

“Be prepared to pay a little extra for tools that will protect your health & safety”

Advice from Bosch Professional on choosing your first set of cordless power tools. > RULE ONE

COMBI

Make safe choices by insisting on professional quality. Your tools will last longer, do a better, faster job and give you fewer problems.

And remember: your health is your greatest asset. Be prepared to pay a little extra for tools that will protect it.

A great all-rounder – and the first power tool in any professional electrician’s bag. Combines drilling and screwdriving functions with an impact drill mode – which you can activate to hammer through hard materials like concrete. Check out the Bosch GSB 18V-21 Professional Combi.

> IMPACT DRIVER

> DUST EXTRACTOR

> OSCILLATING MULTI-CUTTER

Another must for electricians.

Specialised for screwdriving but good at drilling in wood too. Applies rotational shocks – perfect for removing damaged or stubborn screws, and for driving screws through hard wood. More compact than a combi or drill driver, it’s great in cramped spaces and easier to hold in place – with no danger of kickbacks.

Using power tools generates dust.

Never assume it’s harmless. Dustrelated illnesses permanently damage health and shorten lives.

Remove it close to its source with a purpose-designed vacuum cleaning and filtration system.

Electricians have multiple uses for this. Its side-to-side motion allows accurate, highly controlled cutting, grinding, scraping and sanding – often in confined spaces where a rotating tool can’t reach.

Check out the Bosch GDR 18V160 Professional Impact Driver with its class-leading price-toperformance ratio.

See the Bosch GAS 18V-10 L Professional Dust Extractor, for wet and dry use, which maintains maximum suction over long periods.

Go for one with the Starlock system, which gives firmer blade attachment, better performance and a wider range of applications. The Bosch GOP 18V-28 Professional MultiCutter, with snap-in accessory change, is your best choice.

Use a combi or drill driver instead for: larger drilling diameters and harder materials; driving long, thin screws into timber; and precise setting of screw tightness.

“An impact driver is great in cramped spaces”

> BATTERIES FIRST! Before it’s too late to change, start building a set of compatible 18V tools – so you don’t need different batteries and chargers for each one.

For more information visit:

www.bosch-professional.com/gb/en/service/news/apprentices/ TOOL S A N D T E S T I N S T RU M E N T S I AU TU MN 2019 I SPA RKS

43

WHAT’S IN YOUR BAG? > MILWAUKEE BACKPACK

ALEX JONES

Alex works as a sub-contractor on various sites across the North West in addition to his self-employed work. He says he loves working on new-build projects “as you can get a lot done and the site atmosphere is awesome. Other than that I love a good dirty rewire – sweating in lofts isn’t always fun, but it’s what I love.”

> STABILA MINI MAGNETIC LEVEL Magnets along one side and underneath make installing back boxes level a breeze. It comes with a belt clip as well to keep it handy.

“I love a good dirty rewire – it’s what I love”

“Has so much space for storage and the straps can handle any weight – there’s actually space behind that section for my M18 impact and M18 combi.”

> FLUKE T90 TESTER “A must have – this is a top quality bit of kit. It has a built in continuity bleeper which is a very handy feature.”

appleton_ electrician_uk

> METABO DRILL DRIVER “Compact but comes with a punch – it has adjustable torque settings and clips onto the tool-belt easily. The battery life on it is insane.”

> WAGO CONNECTOR BOX MINI ORGANISER “Perfect size for some maintenance-free connectors.

Fits in the base of the bag with space to spare – always handy if you need one quickly.”

> KNIPEX 5-IN-1 “Versatile and makes use of gripping cable that’s out of reach – especially useful during lighting installs. The cutter on it is a beast as well.”

HOT TOOL TIP PUT DIFFERENT COLOURED LIDS ON YOUR BLACK SHARPIE AND IT WILL GO ‘MISSING’ FAR LESS OFTEN

> WERA VDE LASER TIPPED DRIVER SET “The feel of these drivers is insane. They grip like no other set I have and haven’t once ruined a screw head.”

TOOL BAG I AU TU MN 2019 I SPA RKS

45

BOSCH WALL SCANNER

A good wall scanner helps you work with confidence and reduces costly mistakes on the job.

T

he Bosch Professional D-Tect 120 Wall Scanner is a highperforming radar scanner that gives you a detailed picture of what’s hidden beneath a surface.

“Detect live cables up to a depth of 60mm”

> RADAR SCANNER FOR ALL MATERIALS It can detect live cables up to a depth of 60mm, steel and copper up to 120mm, wooden studs up to 38mm and water-filled plastic pipes up to 60mm.

Features such as the scanner’s active current warning system and traffic light LED warning signals help you carry out jobs such as:

46

SPARKS I AU TU MN 2 0 1 9 I TO O L S AN D T E S T I N S T RU M E N T S

> Tracing power line supply lines across surfaces that link with sockets, so you can avoid drilling into live wires > Finding convenient locations to fit light switches and sockets > Avoiding drilling into water-filled plastic pipes > Locating appropriate positions to fit large and complex fuse boxes

> USER FRIENDLY

> DETECTION MODES

UNIVERSAL MODE:

The tool is very user friendly with clear visual and audible signals and a high contrast display. It enables even beginners to accurately locate cables and to find ideal spots for electrical installations.

The D-Tect 120 detects up to 120mm and can be used to meet a variety of electricians’ application needs through its three detection modes. The illuminated buttons enable users to choose between the operating modes, increasing the accuracy for different application scenarios. The detection depth varies within the different detection modes in order to optimise accuracy.

The default detection mode easily identifies metal, live wires and water filled plastic pipes. It covers the majority of existing wall scenarios and applications. If the detected material is unknown then this is the mode to use.

With the object tracking function, you can easily avoid costly mistakes. The D-Tect 120’s clear display screen indicates the positioning of detected objects behind surfaces through its informative directional arrows offering vital guidance for new electricians.

“The object tracking function helps you avoid costly mistakes”

DRYWALL MODE: A mode optimised for materials such as plasterboard and wallboard. This is the best mode to detect wooden studs but is just as accurate for metal, live wires and plastic pipes.

CONCRETE MODE: Optimised for concrete and other homogeneous materials. Use when searching for rebar.

> CENTRE FINDER FUNCTION When an object is located, an audio signal will be heard as well as a visual display signal. This is useful when locating objects and when identifying safe areas to drill. The orientation arrows that appear on the display point you to the centre of wires, water-filled plastic pipes, wooden studs and more.

> SPOT MEASUREMENT FUNCTION

> DUAL POWER SOURCE

The innovative radar technology enables spot measurement for precise detection even in the most compact of spaces – there is no need to move the tool back and forth, as results are displayed as soon as the tool comes into contact with the surface.

The D-Tect 120 has a dual power source, being operable by either alkaline batteries or a 10.8/12V lion battery, from the Bosch Professional Power Tools range - bringing versatility to detection.

For more information visit: www.bosch-professional.com/gb/en/

TOOL S A N D T E S T I N S T RU M E N T S I AU TU MN 2019 I SPA RKS

47

FREE SAFETY KITS FOR TRAINEES IN SCOTLAND

The very first item you should own as a trainee electrician is a safety lockout kit.

The kit costs around thirty quid and could save your life. Get used to using a lockout kit early on.

T

oo many electricians are injured or killed each year because they have not safely isolated the circuit whilst working.

Safety lock-out kits should be used as an integral part of the safe isolation procedure. Even if your employer doesn’t use a lockout kit, you should. > TRAINING TRUST

SECTT and Electrical Safety First are taking a lead in supplying these to all 3rd stage Apprentices and Adult Trainees in Scotland.

SECTT chief executive Anne Galbraith is an advocate for electrical

safety at work. She said: “I cannot stress enough the importance of working safely at all times, to protect the apprentices, our colleagues, and the members of the public.

“The kits will be provided to apprentices and adult trainees from the Shetland Isles to the Borders, studying at 21 approved centres across Scotland. Apprentices and adult trainees should become familiar with these lockout kits as these are the same kits that are used when sitting the Final Integrated Competence Assessment (FICA), which is the AM2 equivalent in Scotland.

“Even if your employer doesn’t use a lockout kit, you should!”

“Over 650 trainees are being supplied with free lockout kits

by SECTT and ESF. Worth £30, the kit will help the electricians ensure that electricity is turned off (and stays off) until electrical work is safely completed. This process is a safety fundamental and essential in helping to avoid a serious or fatal electric shock.”

“Adopting safe working practices and procedures is essential, particularly for this industry,” said Phil Buckle, chief executive of Electrical Safety First. “The kits promote safe working as an ingrained habit.

At some point in their career, that could make the difference between life and death.”

To find out more, visit: www.sectt.org.uk

48

SPARKS I AU TU MN 2 0 1 9 I LO C KO U T KI T S

WHY DRESS LIKE AN AMATEUR WHEN YOU WORK AS A PRO?

FOLLOW

@sparks_magazine_

THE FIRST TOOL IN YOUR BAG ENTRY-LEVEL ECONOMY – WITH PROFESSIONAL PERFORMANCE, RELIABILITY & RESILIENCE > Compact, ergonomic design for comfort and control > Keyless chuck for wide application range > Changeable carbon brushes for longer tool life > LED light for clearer vision > Part of the Bosch Professional 18V System for compatibility with all Bosch 18V tools, batteries and chargers

Bosch GSB 18V-21 Professional Combi RRP of £149.94 (excluding VAT) includes combi + two 2.0 Ah batteries + GAX 18V-30 charger + L- BOXX carrying case

Lock

Test

Protect

NEW KIT Contains:

MCB-KIT2 - Lock Out Kit 2206EINS - Snips TPT320 - Tester

CHECKING EARTH LEAKAGE CURRENTS

Megger on its DCM305E earth leakage clampmeter

“Exceeds latest safety design standards”

> SAFETY IN MIND

T

he DCM305E is perfect for identifying and measuring the earth leakage current in a circuit where the RCD (residual current device) keeps tripping out unexpectedly.

The measured result will quickly identify whether the earth leakage current present is excessive, causing the RCD to trip, or if the RCD itself is over-sensitive or faulty.

> EFFICIENT AND VERSATILE Specially designed to check earth leakage currents, the DCM305E is an efficient and highly versatile instrument.

The clamp features an autoranging display with the option of six manual ranges – 6 mA, 60 mA, 600 mA, 6 A, 60 A and 100 A – with a minimum resolution of 0.001 mA on the 6 mA range.

The device’s upper range also enables TRMS AC current measurements up to 100 A. Additionally, this clampmeter vastly improves measurements on circuits with harmonics/electric noise on the cables using a low pass filter of 50/60 Hz.

“Quickly identify if the earth leakage current is excessive”

Safety is of the utmost importance and with that in mind, the DCM305E exceeds the latest safety design standards IEC1010-2-32 and EMC requirements through a series of safety features that provide you with a safer working environment.

Other key functions include the ‘data hold’ feature, which aids in measurements where there is a problem with accessibility or poor lighting, and the automatic power off feature that extends the battery life.

> EARTH LEAKAGE Earth leakage is electric current that finds its way to earth via an unintended path. There are two types of earth leakage – intentional and unintentional.

Unintentional earth leakage results from faulty equipment or insulation, whereas intentional earth leakage is exactly that – a consequence of equipment design. Examples are IT equipment and fluorescent lighting systems, which often produce a small amount of earth leakage even when operating correctly.

Check out uk.megger.com

TOOL S A N D T E S T I N S T RU M E N T S I AU TU MN 2019 I SPA RKS

51

THE 18TH EDITION AND INSPECTION & TESTING WHAT YOU NEED TO KNOW! The 18th Edition of the Wiring Regulations, which came into full effect this year, contains lots of big changes, but also several subtler changes. As an installer you need to be fully up to date with these changes, to ensure you can continue to undertake tests and inspections safely, efficiently, and in accordance with the Wiring Regulations. > PART 6, REVISITED Part 6: Inspection and Testing, contains some of the more extensive changes in the 18th Edition. It has been completely restructured to align the Regulation numbers with the CENELEC standard (CENELEC is the body responsible for European standardization in electrical engineering).

By Gary Parker, senior technical support engineer, ECA

> IS MORE COMPLEX RCD TESTING NEEDED UNDER THE 18TH EDITION? There is a note in Regulation 643.8 that now states that RCDs up to 30 mA can be tested at a current equal to, or higher than, five times their rated residual operating current. There is also more emphasis on different types of RCDs, particularly where there may be waveform distortions. EV charging and solar PV are good examples of this.

Note that in some instances, these RCDs, often known as Type A, Type B or Type F, may not be compatible with some older models of RCD test instruments.

“As an installer you need to be fully up to date with these changes”

Chapters 61, 62 and 63 have been deleted and the content moved to Chapter 64 (Initial Verification) and 65 (Periodic Inspection and Testing).

The model forms of documentation in Appendix 6 of BS 7671:2018 have also been modified, albeit only slightly, with the biggest change being in the Minor Electrical Installation Works Certificate; seeing some content moved to highlight the ‘presence and adequacy of earthing and bonding arrangements’.

Regulation 643.6 has introduced a new requirement to verify polarity at the origin, where relevant, before energisation. This is something that most contractors have done, but is good to see in the Regulations.

> DO NEW CERTIFICATES NEED TO BE USED? There are subtle changes to the 18th Edition test certificates, but this goes for all the forms. As such, any work being done in accordance with the 18th Edition commencing on or after 1st January 2019 should be, and should have been, certificated using 18th Edition model forms.

For more info visit: www.eca.co.uk/Project18 18T H E DI T I ON I AU TU MN 2019 I SPA RKS

53

APPRENTICE

CONSIDERED TE ACHING YOUR TRADE?

If your phone is anything like ours then it’ll be full of apps, some of which you don’t even use.

SPARKS takes a look at the latest apps to help you fill your phone with something useful.

Due to the expansion of our provision we are seeking candidates for the following Construction Trade positions: • LECTURER - PLUMBING • LECTURER - PAINTING AND DECORATING • LECTURER - ENGINEERING We would also like to hear from experienced and knowledgeable trade professionals in Carpentry and Joinery, Electrical Installations and HGV Motor Vehicle who are looking to develop their career whilst passing on their valuable skills to the next generation.

MyHOME Up App by Legrand The MyHOME Up app works as part of the MyHOME UP home automation system.

Essentially, it is a remote alternative to a wired control panel. Once the MyHOMEServer1 has been powered up, all actuators and dimmers will be working within minutes. The contractor then opens the app in ‘installer mode’ and all devices connected to the server will be ready to link to a function on the app.

The same app can then be downloaded and used by the homeowner to remotely control and manage synchronised lighting, climate, audio controls and more.

Free to download on iOS and Android.

HERE’S WHAT YOU’LL NEED :

• Recent experience of working in the industry • Up to date knowledge of the subject/vocational area • Ability to inspire, motivate and raise the aspirations of learners • Full driving licence and use of vehicle for business purposes • A Level 2 in English and Maths or the ability to demonstrate competence at this level through diagnostic testing • A minimum Level 3 NVQ in a relevant trade • A teaching qualification OR the willingness to obtain one An additional recruitment and retention payment may be available to the right candidate dependent on skills, qualifications and experience.

If you would like to have an informal conversation about any of the roles or would like to arrange a visit to the College to meet the team, see our workshops and get a better understanding of the courses we deliver then please contact the Human Resources Team on: 01530 836136 or staffrecruitment@stephensoncoll.ac.uk

EXERCISES We’ve been lucky enough to collaborate with electrical expert Mike Davies, who has been in the industry since the 1970s.

Mike became a qualified electrical engineer after completing an apprenticeship when he left school at 16.

He became a college lecturer in 1980 after completing a Further Education teacher training qualification.

Now retired, Mike works as a self-employed lecturer and training consultant.

Go to sparks-magazine.co.uk to download exercise answers for free

ELECTRIC CABLES The following questions require you to study the relevant sections of Units 202, 203 and 204 of C&G 2365-02 and Unit 305 of C&G 2365-03 or EAL equivalent.

For each question decide if the answer or statement is true or false and consider why.

STATEMENTS

Q1

Electric cables are designed to carry voltage.

Q2

The specified size of an electric cable is the cross-sectional area (c.s.a.).

Q3

Copper or aluminium is the material used for the conductors in electric cables.

Q4

The greater the c.s.a. of a cable, the shorter its circuit length has to be.

Q5

Cables must be suitable for the environment in which they are going to be installed.

Q6

The resistance of a conductor decreases with increasing length and increases with decreasing cross-sectional area.

Q7

The first stage in calculating a suitable circuit cable is to determine the design current of the circuit.

Q8

The current rating of a cable is halved when a BS 3036 type protective device is used.

Q9

The voltage drop of a chosen cable must be determined before the cable is considered suitable.

Q10

Table 4D2A and 4D2B are the tables to be consulted when calculating the correct size of twin and earth cable to be installed.

Q11

The maximum current rating and voltage drop of a 6mm² twin and earth cable when clipped directly to a surface (Reference method C) is 47A and 7.3mV/A/m.

Q12

A 25mm² single-core thermoplastic non-armoured cable without sheath, installed to method A and supplying a single-phase resistive load, has a maximum voltage drop per ampere per metre of 1.80mV.

TRUE

Go to sparks-magazine.co.uk to download exercise answers for free

56

SPARKS I AU TU MN 2 0 1 9 I E XE RC IS E

FALSE

ELECTRIC CABLES The following questions require you to study the relevant sections of Unit 203 of C&G 2365-02, Unit 302 of C&G 2365-03 and Unit 309 of C&G 2357-13 NVQ or EAL equivalent.

It is a good idea to review the basic principles of conductor and insulation resistance when considering electric cables.

RESISTIVITY Electric cables consist of the insulation and the conductor. The conductor is usually made from copper, but can be aluminium where larger cross-sectional areas may be required.

Two facts apply to a conductor: a) The longer the conductor, the greater the resistance. b) The greater the c.s.a., the lower the resistance.

This can be shown in a simple diagram:

r1

c.s.a.

Length

If conductor length is doubled, the conductor resistance is doubled: r1

r1

R total (Rt) = r1 x 2

If the c.s.a. is doubled then the resistance will be halved r1 r1 End view

Side view

}

= r1 2

Worked example: Let (r1 = 1Ω) If the conductor is doubled in length then R total (Rt) = 2 x 1 = 2Ω If the conductor length is increased five times then Rt = 5 x 1 = 5Ω

Q1

Identify the British Standard series that applies to cable conduit systems.

Answer: ................................................................................................................................................................................

Go to sparks-magazine.co.uk to download exercise answers for free

E X E RC I SE I AU TU MN 2019 I SPA RKS

57

TIME SAVING BACK BOX CONNECTORS Save time installing multiple back boxes: Instantly connects back boxes Perfect alignment & spacing More single cable between boxes Multiple length variants available Reduces second fix work

AVAILABLE AT YOUR LOCAL WHOLESALER & ONLINE BUY ONLINE: SPACERCONNECT.COM

get in touch

Call 01761 241 601 | Email sales@spacerconnect.com

The first e-screwdriver from Wiha.

speedE® 3 steps in 1 move.

Drive with speed – fix with feeling.

Increases your speed Protects your material

0,4 Nm

Offers you full protection Protects your health Increases your control

speedE: Rapid electric tightening – fixing by hand with a deft touch. www.wiha.com/speedE

0,4 - 8 Nm

Now consider the cross-sectional-area, (c.s.a.)

Let (r1 = 1Ω) If the c.s.a. is doubled in size then: Rt = ½ = 0.5Ω (Remember: resistance decreases) If the c.s.a. is increased six times then: Rt = ⅙ = 0.1667Ω

Q2

If a conductor has a resistance of 17.8µΩ/mm, determine the resistance of 10m of this conductor if the c.s.a. is 1.5mm²

Answer:

CONDUCTORS Remember, conductor resistance is affected by conductor length, cross-sectional area and temperature.

Q3

Complete the following using either the term ‘increases’ or ‘decreases’:

a) The resistance of a conductor .............................................. with increasing length b) The resistance of a conductor .............................................. with decreasing c.s.a. c) The resistance of a conductor .............................................. with increasing temperature

INSULATION Q4

Complete the following using either the terms ‘increases’, ‘decreases’ or ‘remains the same’

a) The insulation resistance of a cable .............................................. with increased length b) The insulation resistance of a cable .............................................. with increasing c.s.a. c) The insulation resistance of a cable .............................................. with decreasing length

Go to sparks-magazine.co.uk to download exercise answers for free

E X E RC I SE I AU TU MN 2019 I SPA RKS

59

DISCHARGE LIGHTING Questions to cover Units 202 and 203 of C&G 2365-02 and Units 302, 303 and 304 of C&G 2365-03 and Unit 309 of C&G 2357-13 or EAL equivalent Q1

When referring to certain discharge lamps, what is meant by the letters MCF?

Answer: ................................................................................................................................................................................

Q2

For each of the following components found in a MCF single-tube luminaire, state how each is connected in the luminaire circuit.

a) Tube

Answer: ................................................................................................................................................................................ b) Choke or ballast

Answer: ................................................................................................................................................................................ c) Glow-type starter

Answer: ................................................................................................................................................................................ d) Power-factor (p.f.) capacitor

Answer: ................................................................................................................................................................................

Q3

Identify each of the labels shown in the diagram and state the name of this component found in MCF circuits.

Answers: a) ............................................................

A

b) ............................................................

B c) ............................................................

This is generally known as a: ................................................................

Go to sparks-magazine.co.uk to download exercise answers for free

60

SPARKS I AU TU MN 2 0 1 9 I E XE RC IS E

C

Student’s Guide to the IET Wiring Regulations (BS 7671:2018)

The popular Student’s Guide to BS 7671 is fully up to date with the 18th Edition IET Wiring Regulations The must have guide for electrical students

This book helps you to: – Understand technical terminology – Learn how to find the information you need, every time – Improve confidence when working with BS 7671 Designed specifically to help those studying for a career in the electrotechnical industry, the guide makes it easy to work with BS 7671.

Get your copy now at: theiet.org/studentguide-sparks The Institution of Engineering and Technology (IET) is registered as a Charity in England and Wales (No. 211014) and Scotland (No. SC038698).

The Institution of Engineering and Technology, Michael Faraday House, Six Hills Way, Stevenage, Hertfordshire SG1 2AY, United Kingdom.

Q4

A five-year-old fluorescent tube flashes on and off and fails to start when the supply is switched on.

The luminaire has a glow-type starter and the tube has noticeable blackening at each end.

Which component is most likely to need replacement?

Answer: ................................................................................................................................................................................

Q5

A circuit contains five twin-tube 40W fluorescent MCF luminaires. If the power-factor of the circuit is not less than 0.85 lagging and control gear losses are accounted for, determine the full load current for this circuit if the mains supply is 230V single-phase.

Answer: ................................................................................................................................................................................

Q6

Briefly explain how light is produced from a low-pressure mercury vapour lamp.

Answer: ................................................................................................................................................................................

LUMINAIRES AND LIGHTING The following questions require you to study the relevant sections of Units 202 and 203 of C&G 2365-02, Units 302, 303 and 304 of C&G 2365-03 or EAL equivalent.

You will need BS 7671:2018 Requirements for Electrical Installations

Q1

Identify five examples of outdoor lighting installations.

Answer: ................................................................................................................................................................................

................................................................................................................................................................................................

Q2

Give one example of street furniture.

Answer: ................................................................................................................................................................................

Q3

Define the term ‘highway power supply’.

Answer: ................................................................................................................................................................................

Go to sparks-magazine.co.uk to download exercise answers for free

62

SPARKS I AU TU MN 2 0 1 9 I E XE RC IS E

Q4

Identify the type and characteristics of a switch required for the isolation of supplies to high voltage (HV) signs.

Answer: ................................................................................................................................................................................

Q5

Define the following terms associated with lighting equipment found in Regulation group (559.3 and 559.4).

a) Pelmet: .......................................................................

Q6

b) Track: .......................................................................

State the maximum operating voltage of a standard ceiling rose.

Answer: ................................................................................................................................................................................

Q7

A device designed to support a pendant luminaire must be capable of carrying a mass of how many kg?

Answer: ................................................................................................................................................................................

Q8

Explain the meaning of the parts of the following lamp-holder references B15, B22, E14, E27 and E40.

a) B: ....................................................................................

b) E: ....................................................................................

c) Numbers: .......................................................................

Q9

Define the following three terms relating to lighting:

a) Luminaire: ......................................................................

b) Ballast : ...........................................................................

c) Stroboscopic effect: .......................................................

Q10 Identify two functions of the following component

found in the MCF luminaire.

Answer: ...............................................................................

Answer: ...............................................................................

Go to sparks-magazine.co.uk to download exercise answers for free

E X E RC I SE I AU TU MN 2019 I SPA RKS

63

POWER AND HAND TOOLS The following questions require you to study the relevant sections of Unit 204 of C&G 2365-02, Unit 305 of C&G 2365-03 or EAL equivalent.

Q1

Junior, Hack, Panel and Tenon are all types of?

Ans.

The recommended hacksaw blade that at least two teeth are in contact Q5 ensures with metal at any time when cutting steel Ans. conduit or trunking is?

a

Masonry device

b

Hammer

a

14 tpi

c

Screwdriver

b

18 tpi

d

Saw

c

24 tpi

d

32 tpi

Q2

Flat, round, half-round and square are all types of?

a

File

b

Drill

c

Cutter

d

Hammer

Q3

Lineman, long-nose and combination are names associated with?

Ans. A vice that is hinged on one side and has Q6 V-shaped jaws is suitable for Ans. holding which of the following? a

Flat, square metal bar

b

Tubes, pipes and round bar

c

Timber planks

d

Plastic trunking

Ans. Q7

A twist drill has which of the following features?

a

Hammers

b

Screwdrivers

a

Plain shaft for securing in a chuck

c

Hacksaws

b

Conical tip

d

Pliers

c

Spiral flutes

d

All of the above

A hand-tool marked IEC 60900 ‘VDE Q4 tested’ means that? a

The tool can be used at 1200V

b

The tool is insulated to a maximum of 1000V

c

The tool is mechanically tested

d

The tool is only suitable for live electrical working

Ans. Which of the following safety equipment Q8 is essential when drilling holes in any material? a

Neoprene gloves

b

Face mask

c

Safety helmet

d

Safety glasses or goggles

Go to sparks-magazine.co.uk to download exercise answers for free

64

SPARKS I AU TU MN 2 0 1 9 I E XE RC IS E

Ans.

Ans.

Prep

Route

Organize

TOOL KIT Contains:

2206EINS - Snips 12098EINS - pliers 935R - Torpedo Level SRPRS - Polymer Rod Set SRGG6.2 - Gekko Gripper 55475 - Backpack 32228INS - Screwdriver 32243INS - Screwdriver 32244INS - Screwdriver 32246INS - Screwdriver 32247INS - Screwdriver

g comin ’t be n o w ! his soon ast t time At le l any l a w he off t

This

one i s the icing on th e cak e

F O L L HA

E M SHA ‘For displa y purposes only’

66

SPARKS I AU TU MN 2 0 1 9 I H AL L O F S H AM E

a usly obvio s i s d thi ips er di tlesh Whoev t Bat a n o i champ

While many electricians and electrical engineers are fully qualified and do a great job, there are still some people out there who do shocking work (sometimes literally!) and the results can be disastrous.

In association with Crap Electrical UK, we bring you our regular gallery of horrors, showcasing weird wiring, ludicrous lighting and shoddy sockets.

uld e target co Missing th … uences have conseq

t me trician, ge I’m an elec ! out of here Good luck pullin g those cables through

You c an ne ver h ave e cable nough at a switc h!

Looks fi ne to m e…

me kind of Is this so urse? assault co

A big thank you to the members of Crap Electrical UK for supplying us with so many great photos.

The Facebook group, which has around 4,000 members, is run by Charles Billington, Simon Allen, Lewis Boddington, Dave Spencer, Jake Simmons, Samuel Miles and Lee Quince.

If you’ve come across a dodgy installation, send your pictures to us and they could be featured on this page!

You can email us at tom.tracey@sng-publishing.co.uk.

H A L L OF SH A M E I AU TU MN 2019 I SPA RKS

67

IS YOUR WIRING GAME STRONG? YOU COULD BE THE SPARKS APPRENTICE OF THE MONTH We are looking for awesome apprentices and skilful students to enter our monthly online award, which recognises the cream of the crop.

Win MASSIVE prizes worth ÂŁ100s from some of the biggest manufacturers out there. The first ever award launches in September and is sponsored by Schneider Electric, which is providing a stunning prize.

To enter, simply get your lecturer or boss to sing your praises - along with a photo of your best work.

WHAT'S NOT TO LIKE? GET YOUR ENTRY IN NOW! Send nominations to

tom.tracey@sng-publishing.co.uk For the full details visit

www.sparks-magazine.co.uk

Prove your skills with the ECS card

Get your Apprentice ECS card while you’re training.

When you've completed your apprenticeship you can apply for your ECS gold card straight away - and also get ECS Registered Electrician status if you have the 18th Edition Wiring Regulations.*

Download the MyECS app to show your virtual card from your mobile!

*If you hold the 17th Edition Wiring Regulations qualification you can gain an ECS gold card when you complete your apprenticeship. You can then upgrade to Registered Electrician status once you have the 18th Edition. To find out more visit www.ecscard.org.uk/apprentice

Discover our

Electrician Programme

Discover the latest Acti9

PREDICT. PRECISE. PROTECT.

Acti9 Isobar P • Smart connectivity, delivering greater insights • Less cabling with Plug-on technology • Safe and reliable functional connections

schneider-electric.co.uk/isobar-p