HIP Magazine Autumn 2020 issue

THE ONLY MAGAZINE FOR PLUMBING & HEATING STUDENTS

YOUR CLASSROOM

INSIDE…

SPECIAL FEATURE: APPRENTICE OF THE YEAR

WHAT'S IN YOUR TOOLBAG? WITH CJB HEATING HALL OF SHAME

#HIP A0Y20

“The final was definitely a step up from the regional competition. Overall, it’s been brilliant!”

WINNE R

AUTUMN 2020

COMPANION

2020 WINNER THOMAS J THOMAS

WiFi inside

ViStart App: Commissioning in four simple steps. _ _ _ _ _

Fully guided commissioning process No internet connection required (WiFi inside the boiler) For Smartphone and tablet (iOS and Android) System pressure, heating curves, heating circuit naming, adjustable time programs Download, share and document all settings in the final inspection report

The ViStart App can currently be used to commission all new generation Vitodens 200-W and 222-F gas condensing boilers and Vitovalor PT2 fuel cells.

Discover the next generation of heating systems at viessmann.co.uk/vistart Viessmann Limited Hortonwood 30, Telford, TF1 7YP | Tel: 01952 6750000

Vitodens 111-W: for high DHW flow rates. _ _ _ _

DHW flow rate up to 20 litres per minute Integral 46 litre storage, equivalent to a 150 litre unvented cylinder due to (CLS) Cylinder Loading System Superfast heat recovery in less than 7 minutes Can fill a standard bath in 8 minutes, whilst also supplying a sink or wash basin simultaneously

The Vitodens 111-W comes with a 5 year comprehensive warranty as standard with an option to increase to 10 years.

Discover the next generation of heating systems at viessmann.co.uk/vitodens111

Viessmann Limited Hortonwood 30, Telford, TF1 7YP | Tel: 01952 6750000

DIGITAL EDITOR: TOM TRACEY tom.tracey@sng-publishing.co.uk GRAPHIC DESIGNER: LEE OWEN design@sng-publishing.co.uk ADVERTISING: PATRICK BLORE patrick.blore@sng-publishing.co.uk OPERATIONS MANAGER: EMILY HILTON emily.hilton@sng-publishing.co.uk MANAGING DIRECTOR: ZOE TANNER zoe.tanner@sng-publishing.co.uk TECHNICAL CONTRIBUTOR: Jerry Whiteley, CIPHE PRINTERS Stephens & George, Wales

GENERAL ENQUIRIES To subscribe to HIP Magazine call 0121 606 3016 or subscribe online at www.hip-magazine.co.uk

DISCLAIMER HIP Magazine is published by SNG Publishing Ltd (SNG).

All content and artwork is © SNG Publishing Ltd or its contributors and SNG is a trade mark of SNG Publishing Ltd. No part of HIP Magazine may be copied, transmitted or published in any form or by any means without prior permission.

Although SNG has made every effort to ensure the accuracy of this publication, it does not verify any claims or other information appearing in the advertisements contained in HIP Magazine. It therefore cannot accept any responsibility whatsoever for consequences that may arise from the content or artwork contained in HIP Magazine, including any errors or omissions or any opinions or advice given therein.

This publication and its content is not a substitute for professional advice on a particular matter.

Back stronger than ever!

W

elcome to your copy of HIP Magazine! If you’re new to plumbing, well done on making a great career choice! This is one of the most vibrant, much-needed trades, full of diverse career opportunities.

One thingʼs for certain, if you work hard with integrity and keep a positive attitude, you’ll never be short of work and you’ll earn a decent living too; pandemic or no pandemic, everyone needs heating and clean water.

If you've seen us before, you'll know our Summer issue earlier this year was digital-only, with colleges being closed, so it's great to be getting one step closer back to normality with this issue.

One sure way to strengthen your success in this trade is by entering competitions. Not only do competitions increase your confidence but they also make you look more attractive to prospective employers. In this issue, we’re excited to announce the winner of the HIP Apprentice of the Year 2020 competition, and feature photos of Thomasʼ work along with photos from other competitors.

Congratulations also goes to the winners of our Learner of the Month competitions. Both competitions are free to enter, so email us for more information.

Head to the end of the magazine to test your knowledge with some head-scratching revision questions provided by CIPHE. See you in the next issue - or online!

Tom Tracey

Digital Editor

Advertisements are accepted for publication in HIP Magazine only upon SNG Publishing Ltd standard terms of advertising.

SEARCH FOR HIP MAGAZINE

© SNG Publishing Ltd, 2020

EDITOR'S NOTE 02

H IP I AUTUMN 2 0 2 0 I E D I TO R ' S N OT E

FEATURES 02 Editor's Note 04

Bosch competition

20

06

05 Digital Column & #FixPix 06

HIP Apprentice of the Year 2020

12 Heat free jointing 14

How to install the Mira Meta electric shower

16 How to install the Sanifloor & Kinedo Eden shower cubicle

19

46

Why do I need WaterSafe membership?

20 New product alert! Greenstar 2000 combi boiler 25

Product spotlight: Dickie Dyer’s Burn Barrier

26 What’s in your toolbag? with CJB Heating 28

The HIP guide to smart probes

31 Thread sealant 34

What’s new in hand tools?

37 Designer radiators 39

Pipe dreams

12

14

40 eLearning from Grant UK for apprentices 42

Smart security

44 Test your knowledge: boiler parts 46

Low mains water pressure solved!

48 Plumber profile: James Anderson 50

Wilo’s solution to dead legs!

52 Thinking of becoming a heat pump installer?

55

20 Questions with The Peaky Plumber

42

56 Hall of Shame 57 App-rentice 65 HIP Learner of the Month

EXERCISES 60 Identify the tool 61

Bathrooms, showers & taps

CONTENTS C ON T E N T S I AU TU MN 2020 I H IP

03

WIN BOSCH COMPETITION

A BOSCH GO

SCREWDRIVER Minimum effort, maximum efficiency.

Are you still using a manual screwdriver? If so then it’s time to upgrade your toolkit with the new Bosch GO Electric Screwdriver!

The GO 2.0 is one of Bosch Professional Power Tools’ latest innovations and an essential part of any plumber’s kit. Offering power and control superior to any manual screwdriver, the GO 2.0 – upgraded from the GO first generation cordless screwdriver – will help you get more work done in less time, with a lot less effort!

The GO 2.0 is ideal for boiler installation/ maintenance, home appliance repairs, assembly tasks – basically anything with a screw!

Handy features include: • Ergonomic design to help prevent blistering on your hands from repetitive use • Innovative electronic brake – this stops the tool immediately after use, preventing overtightening and any damage to screws • Easy handling with dual-activation – simply push or press for power on • 5 torque settings, plus a maximum performance mode with a manual clutch that allows for precision control and power depending on the task at hand • USB charging interface – charge as easily as you charge your smartphone!

This great giveaway comes complete with a mini L-BOXX carry case, a USB charging cable with a plug adaptor and a 26-piece accessory kit to take on multiple tasks.

How to enter…

To be in with a chance of winning this tool, simply send an email to: admin@sng-publishing.co.uk and put ‘Bosch GO’ as the email title.

We’ll pick 5 lucky winners at random and notify them via email by 7th February 2021.

Good luck!

For terms & conditions, head to: www.hip-magazine.co.uk/terms/

The promoter of this competition is Robert Bosch Limited, a company incorporated in Scotland with company number SC013418, whose registered office address is c/o Bosch Rexroth, Viewfield Industrial Estate, Glenrothes, KY6 2RD, United Kingdom. Participants must be aged 18 or over and resident in the United Kingdom.

Carl Ladd

DIGITAL COLUMN

Carl and his business partner Paul want to help those training in a variety of different trades to have the best chance possible of succeeding.

You can find the Foundation on Instagram at

@the_apprentice_foundation_ Get in touch with them and share your story.

BY TOM TRACEY, DIGITAL EDITOR Apprentices supporting apprentices is something we will always get behind.

So when Level 2 plumbing apprentice Carl Ladd got in touch with us to tell us about The Apprentice Foundation, we were keen to hear more. Carl, a mature apprentice who retrained after being a carpenter for eight years, said: “We want to help the people who have managed to get a course through either government funding or other means but now can’t actually use the skills they’ve learnt as they progress.”

Plus - we’ve launched a new video series with Carl, called The Apprentice Diaries. The first few episodes along with some funny outtakes - are already up on our IGTV. Check them out as we follow Carl through his apprenticeship journey.

Whether it’s helping others to source tools, PPE and other equipment, or to help full-time learners find apprenticeships,

GET IN TOUCH!

#FIXPIX

Everyone loves a good pipe pic. If you’ve worked on something epic, make sure you take a photo and tag us on social media with #FixPix so that you can get the recognition you deserve!

HIPMagazineUK #F I X PI X I AU TU MN 2020 I H IP

05

APPRENTICE OF THE YEAR 2020 COMPETITION IS FINALLY COMPLETE!

Massive congratulations to this year’s winner, Thomas J Thomas, who despite the strange circumstances managed to come out on top in this career-boosting opportunity and join the group of 11 previous winners. Turn over the page to read his reaction to winning the competition.

D

ozens of competitors took part in seven regional heats between January and March across the country, before the lockdown caused the competition to be postponed.

The seven regional winners completed a short online written test. The results were combined with their score from the regional heats and the top three went on to a one-day live final at their own colleges on 29th September 2020. The top three were: Joseph Parkinson (University Academy Holbeach), Thomas J Thomas (Coleg Llandrillo) and Harry Pegler (SGS College).

“

HIP Magazine’s Emily Hilton said: “The standard of competition was excellent this year, it’s wonderful to see the next generation of plumbing and heating professionals showcase their skills. We’re thrilled that the 2020 final went ahead in this new format which allowed competitors to compete in the final safely.”

As well as the prestige that comes from winning the competition, each year there are fantastic, career-boosting prizes up for grabs. The prizes this year have been donated by well-known industry names including sponsors ADEY, Worcester Bosch, Pegler Yorkshire, DEWALT, Mira Showers, Graham The Plumbers’ Merchant, RA Tech, Wilo, WAGO, WaterSafe, Wavin, Kingspan, Blaklader and Volkswagen.

06

H IP I AU TUMN 2 0 2 0 I AOY 2 0 2 0

REGIONAL WINNERS ISABELLA STAGG

DANIEL LEWIS

ETHAN WHYTE

SAM SCOTT

WEST SUFFOLK COLLEGE SOUTH EAST WINNER

GOWER COLLEGE SWANSEA WALES WINNER

SOUTHERN REGIONAL COLLEGE NORTHERN IRELAND WINNER

MIDDLESBROUGH COLLEGE NORTH EAST WINNER

“I’m overwhelmed to have won,” said Isabella.

“The standard was really good here and I was surprised to win.

I’m really pleased.” Head of Plumbing at West Suffolk, David Warren, said: “Isabella is a model student. She’s fantastic in the classroom. I’m so proud of her winning and so is the whole team at the college.”

Daniel said HIP Apprentice of the Year was the first competition he had entered and had found it challenging, but had taken his time and worked through it. His lecturer Michael Morris said: “I’m extremely proud. He’s worked hard for this and he got what he deserves. He’s a top man.”

“I feel good, just very surprised to have won,” said Ethan after his victory, “but definitely very happy about it. I came second here last year so to go one better is brilliant.” Ethan’s lecturer Ian Henry said: “He is a very diligent, hard-working student and always does his best at what he does.”

Sam said: “It feels great to win – it’s been a good experience. The task is fairly hard but I managed to get it done in time.” Lecturer Scott Pearson said: “He’s done amazingly well. The work that he’s put out there, I didn’t expect anything less. We knew we had to put him forward and it was definitely the right decision. He’s got to live up to this now!”

AOY 2020 I AU TU MN 2020 I H IP

07

THE FINALISTS On the day of the final, the HIP team headed off to different corners of the UK to make sure the competition ran smoothly - and hand out those all-important prizes.

HIP: How did you find this year’s competition?

Joseph: I was a bit short for time, but I tried my best. I was best at the straight bits! My 15mm bending was a lot better than my 22mm, which I struggled with.

HIP: Has entering made you feel more confident?

JOSEPH PARKINSON UNIVERSITY ACADEMY HOLBEACH

Joseph: It helps a lot - when you go into someone’s house, you don’t need to look back on yourself too much, you know what you’ve done is good enough to leave.

HIP: What made you choose plumbing?

HIP: How did you find the competition?

HARRY PEGLER SGS COLLEGE

08

Harry: It’s a great opportunity. It was challenging and a few bits were stressful, but that’s plumbing. I was best at the bending - in the company I work for, we try to pull bends as often as possible for a better flow rate and less leaks. During the regionals I was a bit concerned about the wiring as I’d never done it before, but learned how to wire in systems for the final!

HIP: Has entering made you feel more confident?

Harry: You begin to realise that what you’re doing and how you’re

H IP I AU TUMN 2 0 2 0 I AOY 2 0 2 0

W

e caught up with the runner-up Joseph Parkinson and thirdplaced Harry Pegler.

Joseph: My mum. I wanted to go into sport, but she said to do plumbing first so I have something to fall back on. Now, I don’t want to do sport - I much prefer plumbing.

HIP: What would you like to achieve in your career?

Joseph: I either want to be a property developer or have my own plumbing and heating company.

HIP: Why should people enter the 2021 competition?

Joseph: It builds your confidence and the amount of prizes you get from it is amazing.

doing it is right, and that you’re a good engineer in your field, which is always great to know. You gain the confidence to do the jobs you need to do.

HIP: Why should people enter the 2021 competition?

Harry: It’s such a great atmosphere, a great day.

The regionals are amazing. It’s good for your confidence, good for your CV and good for you - not only for bragging rights but also the kit, the opportunity it gives and your confidence for the future, knowing you are good at what you do and are out there doing your best.

MEET THE WINNER Thomas J Thomas was announced as the winner of HIP Apprentice of the Year 2020 after a closelyfought final with Joseph and Harry. We caught up with him moments after he was announced as the winner.

HIP: Congratulations Thomas!

How do you feel, having won the competition?

Thomas: I’m really happy.

I’ll go home and celebrate with a few beers! This will go on my CV and I can show people I’m keen to do the job and work to accurate measurements.

HIP: What will you do with all the amazing prizes?

Thomas: I have no idea - I saw all the prizes and thought, ‘wow’, it’s amazing that doing a competition like this can have so much of a payoff.

HIP: How did you find the competition?

Thomas: It was great. The final was definitely a step up from the regional competition, it was a challenge to get it done in time. Overall, it’s been brilliant.

It was a shame not to get the ‘proper’ final but it was still a lot of fun, I really enjoyed it. I did quite well on the copper, which is a big portion of it. There’s a lot to get done in the time and a lot of accuracy involved.

THOMAS J THOMAS “The final was definitely a step up from the regional competition. Overall, it’s been brilliant!”

HIP: Has entering made you feel more confident?

Thomas: It definitely increases your technical skills. You have to be as accurate as 2mm with your measurements in every part of it. It gives you that focus of being accurate to a point of complete precision. You have to be confident in what you do and not second-guess and slow yourself down.

HIP: What made you choose plumbing?

Thomas: When I left school I knew I didn’t want to work in an office as I’m quite practical. My family suggested plumbing - as soon as I left school I went straight into working for a firm and haven’t looked back since.

HIP: Why should people enter the 2021 competition?

Thomas: You should 100% do it - it’s worth giving a go, even if you don’t get through

the regionals, it’s still an amazing thing to say you’ve done. It’s an amazing thing to put on your CV. It also helps with the tasks you have to do in college - if you can do it in a competition with pressure, it’s no problem in college. It also shows employers you have the know-how and are interested in doing plumbing.

Thomas’ lecturer Chris Walling said he’d ‘happily have Thomas working in his house’.

He said: “He can do anything he wants - he’s got the practical skills, quality of the work, he’s very studious. Best of luck to him, I’m sure he’ll be brilliant at whatever he does. I’m made up for him and made up for the college. We’ve entered every single year and have come close previously, but I’m made up to finally have a winner!”

THE COMPETITION RETURNS

LE ARNER OF THE YEAR

2021

COULD THIS BE YOUR YEAR? T H E N E X T G E N E R AT I O N S TA R T S N O W …

With a new name and a new format, we’re excited to announce the launch of the 2021 HIP Learner of the Year competition.

WWW.HIP-MAGAZINE.CO.UK

best of british Total peace of mind

made in the UK With our large Yorkshire manufacturing plant, you can always rely on Pegler for all your piping systems and solutions. 120 years of quality engineering, design and excellent service, guarantee your peace of mind, no matter what the political landscape.

Pegler – Reassuringly British.

for more information tel:

+44 (0) 1302 560 560

email: info@pegler.co.uk

www.pegler.co.uk

HEAT FREE JOINTING

Heat free jointing methods are becoming more and more popular amongst installers and this trend is set to continue. At Pegler, we recognise that the restrictions of naked flames on site and difficulties in acquiring hot work permits add unnecessary stress and obstacles. This is why we offer heat free jointing methods through our press-fit and push-fit technology ranges.

S

ince its inception in the late 1950’s, press-fit technology has been a high quality and efficient solution used across a multitude of projects. Push-fit technology was introduced more recently in the 1980’s, offering fittings which are compatible with multiple pipe materials.

This makes it ideal for diverse applications such as domestic maintenance and refurbishment, new build and large-scale public sector projects.

KEY FEATURES 1. Cleaner than traditional methods 2. Faster (less time to flush system) 3. No carbon deposits 4. Less corrosion

> VSH TECTITE

> VSH SHURJOINT

5. Diverse applications

A world class push-fit system incorporating pipe fittings, valves and controls – delivering cost savings as a result of its speed of installation and a combination of push-fit jointed technology across a range of materials (copper and PEX).

Recognised as a world leading solution for grooved piping systems.

With a broad range of high quality grooved components and expertise in innovative mechanical solutions, VSH Shurjoint offers more value in the HVAC, compressed air and industrial markets.

6. Compatible with multiple pipe materials (push-fit) 7. Cost effective (no need for hot work permits)

Pegler’s extensive range of heat free jointing technologies include:

> VSH XPRESS

> VSH MULTIPRESS

> KUTERLITE

A leading press-fit system, offering a comprehensive and flexible range for all modern building services, providing easy, fast, cost effective and reliable joints.

An extensive plastic tubing system with multi-profile press fittings for use on sanitary, heating and underfloor heating systems.

A range of compression fittings suitable for a broad spectrum of applications across the domestic and commercial sectors.

“Heat free jointing is set to continue its longevity into the future creating even more potential benefits” > VSH POWERPRESS A press system designed for thick wall steel pipe.

Installation times are reduced, and a clean working environment is assured. This new system offers installers a complete solution with great flexibility.

> PRESTEX A select range of brass compression fittings in sizes 8 to 54mm with specific items also available with a chromium plate finish.

The range also covers our standard plumbing valves.

These Pegler brands exhibit the modern innovation and ease of no naked flames, displaying faster and more efficient connections to support the installers.

For more info, visit: www.pegleryorkshire.co.uk

F I T T I N G S I AU TU MN 2020 I H IP

13

HOW TO INSTALL...

MIRA META

ELECTRIC

SHOWER This electric shower comes complete with flexible fittings for easy installation and adjustment.

Electricity off

> STEP ONE

01

Start by ensuring the electrical supply has been isolated and a safe isolation procedure undertaken.

Flush pipework

> STEP TWO

02

Decide on a suitable position for the shower unit and fittings, leaving 200mm from the ceiling to allow for cover removal and refitting.

> STEP THREE

03

Flush through the pipework to wash out any debris before connection.

> STEP FOUR

04

Use the installation template and a spirit level to mark the fixing holes. Ensure the wall is clear of wires or pipework using a stud detector. Drill the fixing holes and insert the wall plugs.

Inlet filter

> STEP FIVE

05

Fix the appliance to the wall using the supplied screws and wall plugs.

14

> STEP SIX

06

Check the inlet filter is in position then connect the supply pipe. Turn on the water supply and check the shower unit for leaks.

H IP I AU TUMN 2 0 2 0 I HOW TO

> STEP SEVEN

07

Strip back the outer cable insulation and insert the wires into the terminal block. Tighten the screws in the terminal block, making sure the wires are secure and tight.

> STEP EIGHT

08

Refit the pipe and cable blanking plates and the service tunnel.

INS TALLING THE FIT TINGS

> STEP NINE

09

Hold the slide rail assembly against the wall in the desired position, checking it is vertical with a spirit level. Use the slide rail brackets as a template to mark the positions of the top and bottom fixing holes.

> STEP THIRTEEN

13

Remove the slide bar assembly, preventing any movement between slide bar and supports. Tighten the clamping screws no more than half a turn to secure the supports to the slide bar.

> STEP SEVENTEEN

17

Feed the hose through the soap dish and insert the other seal into the other conical nut of the hose and screw onto the shower handset.

> STEP TEN

10

Drill the fixing holes and insert the wall plugs provided. Secure the mounting brackets onto the wall using the wall screws, check for vertical alignment, then fully tighten.

> STEP FOURTEEN

14

Install the slide bar assembly onto the mounting brackets and tighten the bolts using the hex key.

> STEP EIGHTEEN

18

Place the shower handset into the clamp bracket assembly.

> STEP ELEVEN

> STEP TWELVE

11

Push the clamp bracket down onto the slide rail, rotating the lever to help with installation. Push the slide bar supports onto the slide bar.

> STEP FIFTEEN

15

Install the end cap at the top and the soap dish at the bottom of the slide bar.

> STEP NINETEEN

19

Finally, make sure that the control dials are aligned with the spindles and replace the cover, and tighten the three cover screws.

12

Fit the slide bar supports over the mounting brackets and adjust the slide bar vertically, ensuring an equal length of the slide bar protrudes from the top and bottom mounting bracket.

> STEP SIXTEEN

16

To fit the hose and shower handset, first insert a hose seal into the conical nut of the hose and screw the hose onto the outlet of the shower.

> STEP TWENTY

20

ready to use!

The Mira Meta is fully installed and

For more details visit www.mirashowers.co.uk

H OW TO I AU TU MN 2020 I H IP

15

HOW TO INSTALL...

SANIFLOOR & KINEDO EDEN SHOWER CUBICLE Saniflo’s Kinedo Eden shower cubicle is ideal for an uneven surface, so was the perfect choice for an installation at Uttoxeter Cricket Club in Staffordshire.

We caught up with the Saniflo team to see how the install went.

While the cubicle was perfect for the space available, there was insufficient gravity drainage to take the waste water from the shower.

By tapping into the soil stack in the WC via a Sanifloor 3 shower pump, a straightforward solution to discharge the water was found.

HOT TIP WHEN GRAVITY DRAINAGE IS NOT AN OPTION, A RANGE OF SANIFLO SHOWER PUMPS TO SUIT ALL SHOWER SCENARIOS CAN BE SPECIFIED.

03

01

02

> STEP ONE

> STEP TWO

Hot and cold water pipes were fed into the ceiling and connected to the water source. Isolation valves were added for quick and easy ability to stop the water flow if required.

Skirting board was removed to accommodate the shower tray.

The location of the waste from the tray was marked on the wall and a hole drilled through to the WC.

04

05

> STEP THREE

> STEP FOUR

> STEP FIVE

Tray feet were adjusted to level the tray once positioned and the Sanifloor gully pipework installed on to the tray and fed though the wall.

32mm pipework was fitted in place to take the used grey water from the shower, via the pump, up the pipe for a metre or so and horizontally along to the soil stack.

The Sanifloor 3 shower pump was then connected to the discharge pipework coming from the tray.

16

H IP I AUTUMN 2 0 2 0 I HOW TO

06

07

08

> STEP SIX

> STEP SEVEN

> STEP EIGHT

The shower face was connected to an internal panel and the two internal glass panels then slotted into place over the grooves in the shower tray to ensure all water is directed inside when the shower is in use.

The external panels and door were then installed.

The Sanifloor 3 was plugged into an extension lead for testing and the shower turned on to ensure the automatic sensor in the gully activates the pump when water is present.

FINISHED LOOK

09 > STEP NINE After testing, the Sanifloor 3 was connected to the electrics and all finishing touches were made to the cubicle.

“In just half a day the whole solution was up and running and the first shower ready to be taken�

The beauty of a cubicle is that no tanking is required (unlike enclosures and tiles) because the internal glass panels and tray work together to create a completely watertight environment. No tiling and grout is required which means installation is very quick and the shower is immediately available for use once in place. No follow up visits are required.

For more details visit saniflo.co.uk H OW TO I AU TU MN 2020 I H IP

17

Replacement made easy.

Mira Jump Multi-fit Electric shower 36 combinations for electrical and water connections to make replacement easy. Showers designed alongside installers, for installers.

www.mirashowers.co.uk

WHY DO I NEED

WATERSAFE MEMBERSHIP?

One thing’s for sure – as the world adjusts to a ‘new normal’ – the need for qualified, approved plumbers who customers can trust is as important as ever.

> WATERSAFE BENEFITS INCLUDE:

1

Promotion for you and your business – get listed on the largest online directory for approved plumbers in the UK, promoted to thousands of people each day, and by your local water company.

2

Customer reassurance – being supported by your local water company and the drinking water regulators offers your customers peace-of-mind.

“Apprentices should talk to their employer to find out if their business is already WaterSafe approved”

O

nce you’ve got the qualifications you need, becoming an approved plumber – and joining the national plumbing register WaterSafe – is a great way to show you’re a professional.

You’ll be in good company.

WaterSafe plumbers have risen impressively to the recent challenges of COVID-19, from frontline work supporting NHS clients to helping customers resolve plumbing problems online during lockdown.

3

A direct link to your water company – self-notify your plumbing work and access free advice on the water regulations and byelaws. > HOW TO JOIN To become an approved plumber you should meet the following basic requirements:

You’ll need a Water Fittings Regulations Certificate and be able to demonstrate you have the right qualifications by joining one of seven Approved Contractor Schemes.

Some of these schemes are free to join while others require you to pay a membership fee for which you get extra benefits.

For more info, please visit watersafe.org.uk/howtojoin

NEW PRODUCT ALERT!

GREENSTAR 2000 COMBI BOILER

Exciting news! The brand new, price competitive Greenstar 2000 combi is now available from Worcester Bosch. The Greenstar 2000 is the direct replacement of the Worcester 2000, which was launched last year. > GREAT SPECS AND SUITABILITY Available in outputs of 25kW and 30kW, with flow rates up to 12 l/min, the newly named price competitive boiler comes with a series of improvements to make installation and maintenance even easier.

“The Greenstar 2000 comes with removeable side panels for easy access”

The natural gas-fired boiler was initially introduced in response to installer requests to provide the brand’s renowned high quality and reliability while answering the call for accessible pricing to homeowners.

Suitable for apartments, small and medium sized homes with one bathroom, the Greenstar 2000 is Worcester Bosch’s quietest combi boiler.

KEY FEATURES > Quick to install with vertical pipework connections > Easy access with removable side panels > Simple to specify with maximum flue lengths of 9m horizontally and 12m vertically (60/100) > Full 230v controls compatibility > Easier PRV push-fit connection

> Copper tails, for CH flow and return, included for a quicker installation > Mains cable now replaceable > Condenses in hot water mode > C6 heat exchanger - an evolution of the WB3 heat exchanger which features in the company’s most popular combi boiler, the Greenstar i > Ability to modulate down to as little as 4.8kW 35 degree hot water temperature rise (10 & 12l/min)

For more info, check out: www.worcester-bosch.co.uk/greenstar2000

@WorcesterBosch

@WorcesterBoschProfessional

Worcester Bosch Professional

E E T N A R A U G

E E T N A R ... GUA

. . .

S E C I R P D E

Y T I L I B A L I A V ED A

Competitive Prices Detailed Product Information Over 2000 Products Always Available E-Billing WWW.GRAHAMDIRECT.CO.UK FIXED PRICES • GUARANTEED AVAILABILITY • LEADING BRANDS • FREE RETURNS* *30 day money back guarantee on products in our Always Available Range. Products should be returned unused, in a saleable condition, with their original packaging and accompanied with a copy of their original proof of purchase.

Every Tuesday at 12 noon, one of the Baxi trainers shares their top tips and advice on social media. And, at no more than a minute long, even the busiest students can find time to watch. So, for nuggets of boiler wisdom, follow Baxi.

To subscribe head to youtube.com/baxiboilers

baxi.co.uk

PRODUCT SPOTLIGHT

Dickie Dyer’s BURN BARRIER Dickie Dyer reckons its Burn Barrier is tough. Former HIP Apprentice of the Year winner Tony Iacovazzo and Alexx Weller, Director of Cardiff Heating and Plumbing South Wales Ltd, put it to the test.

THE PRODUCT One of Dickie Dyer’s bestsellers, the Burn Barrier comes in two sizes - Tony tested the 290 x 275mm mat (RRP £37.03), while Alexx had a look at the 290 x 200mm version (RRP £24.85).

“It's really good quality and I'm really impressed with it” > ALEXX WELLER First impressions are really good. It feels thick and tough, but still flexible. It has multiple layers to withstand high temperatures, but they do advise not to put a flame on the back as it will melt.

It served its purpose, it was thin enough to put behind pipework - I balanced it on some pipe clips so it wouldn't fall over. It is insulated enough to have no impact from heat on the back of the mat or wall.

It's really good quality and I'm really impressed with it. It's also good value for money, coming in at under £25, so it’s affordable.

Alexx's verdict

> TONY IACOVAZZO It comes with a waterproof backing, which I think is good.

When you’re soldering a pipe with water in it, this stops it getting saturated. It’s also got good sturdy seams around the edge to stop it falling apart.

Other burn barriers I’ve used start to come apart and get in the way, but that won’t happen here.

The only issue I’ve had is that the different layers do separate and tend to hug the pipe if it’s in a tight position.

When it hugs, it encourages solder to pool and makes a bit of a mess. Overall, I’d say it’s a really good product – definitely worth going for.

Tony's verdict

Prices correct at time of reviewing

Tested the 290 x 200mm

Tested the 290 x 275mm

For more info, check out www.dickiedyer.com PRODU C T SP OT L I G H T I AU TU MN 2020 I H IP

25

WHAT’S IN YOUR TOOL BAG? CJB HEATING Curt is a 23-year-old plumbing and heating engineer based in North Yorkshire. He has been in the industry since 2012 and has run his own business for three years. He mainly works on servicing, repairing and installing domestic boilers.

We asked him to talk us through his favourite tools.

> ELECTRICAL SCREWDRIVERS

> BAHCO SPANNER I’ve had my Bahco spanner since I was an apprentice it’s the oldest tool in my bag and it hasn’t let me down.

It’s the absolute go-to for an adjustable spanner.

HOT TOOL TIP

@cjb_heating

“I always keep my toolbag up-to-date - there’s always too many new tools to buy that you see on Instagram!”

GO FOR A QUALITY TOOLBAG THAT'S GOING TO LAST. I USE THE VELOCITY ROGUE RANGE - THE BUILD QUALITY IS OUTSTANDING AND THEY COME WITH A LONG WARRANTY

> PLUMB THUMBS

> WERA SET I always take these with me when I first come onto a job and I’m not sure what tools I’ll need yet.

It eliminates the need for me to have lots of drivers in my bag and keeps it neat and tidy.

> GRIP PLIERS

> PLUMB THUMBS Plumb thumbs are absolutely essential - they make removing radiators so much easier.

> KNIPEX GRIPS These are the best in the business, what more can I say!

> KNIPEX ERGOSTRIP This is an amazing little tool for stripping cable, it saves so much time and messing around when you’re wiring.

TOOL S I AU TU MN 2020 I H IP

27

THE HIP GUIDE TO

SMART PROBES

The testo smart probe range offers an innovative, low-cost way to measure and document various aspects of a heating system.

Testo Product Manager, Jon Bawden, visited Logic4Training in Sittingbourne to demonstrate typical uses.

01

02

03

04

05

06

07

08

This testo smart probe kit covers applications for differential temperature measurement using two Bluetooth pipeclamp thermometers.

Also supplied in the kit is a Bluetooth manometer for gas pressure and differential pressure measurement.

Using the two testo 115i Bluetooth clamp thermometers allows engineers to quickly display flow/ return temperature values.

The app automatically calculates the difference value for you.

28

Using the testo 510i Bluetooth manometer enables the user to check gas pressure and perform a tightness test. The smart probes simply connect to your smartphone or tablet and enable a clear display of measurement values in several forms (numerical, trending, raw data).

Depending on the smartphone or tablet being used you can connect six testo smart probes in total, so it’s easy to get multiple measurements displayed.

Here we can see gas pressure and the flow/ return temperatures at the same time.

H IP I AUTUMN 2 0 2 0 I S M AR T PRO B E S

A key feature of testo smart probes is the ability to use the report option within the app to document measurement values and then send copies of reports via email from your smartphone or tablet.

Radiator balancing is made simple by using the testo Smart Probes, with the convenience of not having wires from traditional digital thermometers to break or trip over. The app can document the readings to help validate your installation work to your customer.

Another option for using the testo 510i manometer is to use it for measuring gas pressure on the boiler to help diagnose burner issues. You can also use it for measurement on fan pressure switches and other differential pressure measurement applications.

Although not part of this kit, testo can also supply a noncontact IR thermometer, the testo 805i, to also allow simple and fast surface temperature measurement.

“Compact, pro measuring instruments for your smartphone”

Extra Value with Testo Flue Gas Analysers

The testo smart probe differential temperature and pressure kit retails at £189 and is available through a wide range of dealers nationwide. The additional testo 805i IR thermometer is available at £69.

• For a limited time, buy any testo 300 or new 2020 testo 327, 320B or 320 flue gas analyser kit and get your 1st year of service FREE, worth over £100!

Hurry! Offer ends 31 December 2020

For more information head to testo.com/en-uk/ Available from participating dealers only.

Please see website for terms and conditions.

www.testo.com/en-UK/free-service

LET’S MAKE BETTER HEATING SYSTEMS – TOGETHER GET THE RIGHT SOLUTION AND SUPPORT FOR ANY CHALLENGE

UPS3 15-50/65

ALPHA1 15-50/60

ALPHA3 15-50/60

Heating systems frequently face challenges, at Grundfos we are very proud to be at the forefront of technology, to help overcome this. We have been continuing to invest in our domestic circulator range, to ensure that we can bring you the very best.

Together, we can make better heating systems.

Discover our range of domestic circulators grundfos.co.uk/newteam

Hey,

still getting leaks after so much work?

THREAD SEALANT NOW WRAS-APPROVED FOR POTABLE WATER!

Yeah, no wonder!

My plumber’s still not using LOCTITE 55

LOCTITE® 5400 thread sealant is now a must-have part of your toolkit.

Part of Henkel’s Health and Safety range, this general-purpose metal pipe sealant is hazard-label free.

W

RAS-approved for use with potable water up to 85°C and the ideal choice when the joint needs to be sealed and locked against vibrational self-loosening. > HOW IT WORKS

The fast, easy and secure pipe-sealing cord LOCTITE 55 for threaded fittings is fast, clean and easy to use. You can even re-align or back off a joint up to 45° and guarantee a 100% seal. It complies with all the latest hot and cold water, potable water, gas, compressed air and LPG (gaseous) regulations. Join the 1000’s of plumbers who have already switched from using tape, hemp and pastes. >> For more information visit: www.loctite55.co.uk

Now 160m.

Test it.

Benefit.

The sealant relies on the absence of air and contact with metal to make it cure. When applied to a taper parallel thread and wrenched tight, the adhesive provides an instant seal. So, if needed, the system can be pressurised straight away. It also protects the mated threaded areas against corrosion and the seal can be released at any time using compliant practices.

“Application is simple and quick” > APPLICATION

1 2

Ensure all surfaces are clean.

Apply a 360°bead of LOCTITE 5400 to the leading threads of the male fitting, leaving the first thread free and thoroughly filling all voids.

For bigger threads and voids, apply a bead of product to the female threads also.

3

Assemble and wrench tight, job done!

LOCTITE 5400 covers the lion’s share of applications and provides excellent chemical and thermal resistance.

In addition to sealing threaded fittings, Loctite 5400 is ideal for sealing olives.

For more info visit: www.henkel-adhesives.co.uk

Connected thinking...

Now we go from boiler to point of use.

1 2 3 4 5 6

RWC’s family of products can now take you from the boiler to the point of use, offering an integrated solution that is fast and simple to install. JG Speedfit, the ultimate in plastic pipe connection technology, meets brass SharkBite to offer a complete push-fit system for plumbing and heating. Together with Reliance Valves, our world-leading pressure and temperature control valves, we have everything you need to complete your job more efficiently.

Find out more about our family of brands: Visit: rwc.com/family

1

2

0 bar

3

1

4

0

b

What’s

NEW

in hand tools?

KNIPEX TubiXÂŽ Pipe Cutter > Easy to cut pipes up to 35 mm in diameter and with a wall thickness of 2 mm > One handed operation thanks to the QuickLock one-hand locking mechanism > With an integrated, retractable deburring tool which can be used to smooth out the cut surface > The cutting wheel is made of quality ballbearing steel and can be exchanged quickly with a spare wheel

3

KNIPEX Quality – Made in Germany

KNIPEX UK marketing manager David Barnes takes you through the latest trends in hand tools.

It would be easy to think that pliers have not changed all that much over the years. However, innovations and new features are designed and incorporated into hand tools on a regular basis to save time and effort for plumbing and heating installers. Those trends are reflected in our new products.

3 Pipe Cutters > The 90 10 185 pipe cutter for multilayer and pneumatic hoses features a universal support for right angled positioning and its easy on the hands for continuous use > The 90 25 185 meanwhile is perfect for cutting plastic composite pipes, and leaves clean, smooth and burr free finish with an opening spring and locking device

1

4 KNIPEX StepCut Cable Shears

1 KNIPEX CobraÂŽ XS > The smallest water pump pliers in the world with full functional capability > Measuring at just 100 mm long > Eleven adjustment positions and can grip nuts up to 24 mm in width > Everyday pair of pliers, which you can carry with you in a shirt or trouser pocket

2 Pliers Wrench 300 mm > Grips width across flats up to a diameter of 68 mm (2 1/2") > This new model rounds off the range of six pliers wrenches (125, 150, 180, 250, 300 and 400 mm) > No teeth with smooth jaws, for use on chrome and other sensitive surfaces > For especially sensitive surfaces, KNIPEX now offers plastic jaw covers as accessories for the 180, 250, and 300 mm variants.

The protective jaws are easily attached by hand and snap into place > Soft, smooth gripping surface ensures that holding, gripping and fixing designer fittings or extremely sensitive materials does not result in any damage

To keep up to date with KNIPEX tools, why not follow us on our social media platforms!

Instagram@ knipex_uk

Facebook@ knipex.uk

Twitter@ knipex_uk

www.knipex.com

> Stepped blades, with a milled serrated edge > Reduced effort required by up to 40 percent! > Clean cut without the cables being crushed in the cutting process > Only 160 mm long > Ergonomic design of the handles enables an optimum cutting feel > Pinch guard also prevents injuries

2

4

DESIGNER RADIATORS

Gone are the days when there was only one style of radiator to share heat in a home. The choice of radiators these days is huge, so it’s vital that you think carefully about which ones to select for each job.

HOT TIP LOW SURFACE TEMPERATURE RADIATORS ARE IDEAL FOR CARE HOMES, SCHOOLS & NURSERIES

N

owadays the bestselling radiators are the standard steel panel radiators, although they are far better looking and better quality than they were 20 years ago. But there are a wide range of decorative and designer radiators available now as well.

Vertical radiators are very much in vogue and there are a number of special application radiators available, including low surface temperature radiators where the casings never heat up beyond a safe 43ºC – ideal for nursing and care homes and sheltered housing developments, as well as schools and nurseries.

There are extra protection versions of radiators to withstand constant or high levels of damp and condensation – in wet rooms and changing rooms for example. And there are extra robust, heavy duty radiators designed to withstand knocks and poor treatment – originally designed for sorting offices and industrial environments but now popular in a wider range of end uses including schools!

> SPECIALIST RADIATORS Specialist bathroom and kitchen towel rails and radiators are hugely popular and range from simple towel rails to the most extravagant designs. Chrome plated ladder rails are still available but have reduced in popularity as the choice of alternatives has grown.

To see the wide range of options available and to find the free radiator sizing and heat loss calculator software available from Stelrad Radiators, visit www.stelrad.com R A DI ATORS I AU TU MN 2020 I H IP

37

solutions within a diverse range of industrial market sectors, experts from Nortek are available to visit your offices to deliver the CPS accredited courses, which count towards annual CPD points requirements.

FOLLOW

To book a Nortek lunch and learn session please see details below:

Variable Speed Drives - Learn how installation of VSDs can deliver energy savings and how to avoid over-sizing.

Packaged Pumping Stations - Prefabricated packaged pumping stations and pumps for wastewater applications.

Variable Speed Cold Water Boosting - Multipump variable speed booster sets for clean water boosting applications in Building Services.

Arrow Valves Ltd Email: traininguk@xyleminc.com Telephone: 01297 630 230

Email: cpd@nortek.com Telephone: 01384 489700

Xylem Water Solutions UK

Parker Hannifin

Course: AFREE fresh at Course: Lunch &look Learn seminars tailored to suit your training needs the Water Regulations

Course: Compressed Air Distribution – Efficient Design with Modular Pipe Systems

Certified CIBSE CPD Course Provider, Parker Hannifin offers training on Xylem’s FREE Lunch & Learn sessions can be delivered in your own business the basics of compressed air distribution and factors to consider when premises at a time to suit your business needs. designing an efficient modular pipe system. Subjects include: Our experts can deliver tailored seminars to suit your training needs around • The role of a compressed air distribution system: Selecting a piping broad topics including: • Packaged Pumping Stations system; Traditional vs modular • Clean water applications and systems • Treatment applications/systems As manufacturers of backflow prevention devices, • Materials & technologies: The value of designing a compressed air • Clean water boosting • Dewatering applications system; Leakage; Pressure Loss ; Air Quality; Energy Efficiency / Savings • HVAC • Instrumentation, we have a thorough understanding of the Current controls and Training will last approximately 1 hour and take place at a mutually • Wastewater applications and systems automation convenient location.

Water Regulations and how the Water Supply Industry Email: traininguk@xyleminc.com Email cpd.uk@parker.com is interpreting them.0115 We940 are always keen to share Telephone: 7368 Telephone: 07393 466674

HIPMagazineUK

our expert knowledge and product innovation - our technical CPD Seminars on the subject of the Water Swegon Management Ltd can affect system DOES COPYAir NEED TO RegulationsArrow exploreValves how these Course: No Smoke Without Fire: fresh lookwith at the BE UPDATED?? design andCourse: provideAdelegates anWater insight in Understanding Fire Dampers Regulations selecting appropriate backflow prevention devices.

This session, available as an in-person seminar or webinar, outlines the As manufacturers of backflow prevention devices, we have a thorough need to understand and comply with tested methods when selecting, understanding of the Water Regulations and how the Water We can deliver the CPD at Current your works, or we run installing and using fire and fire/smoke dampers. Attendees are Supply Industry is interpreting them. As we are always keen to share our various days at our offices. educated in damper design, selection, installation, testing, analysis and expert knowledge and product innovation - Our technical CPD Seminars performance. It aims to highlight and clarify the differences between fire and fire/smoke dampers. The seminar stresses the critical responsibility of all parties involved in the overall sequence from system specification through to compliant installation. Emphasis is placed on the need for all parties to work as a team in order to achieve this goal.

on the subject of the Water Regulations explores how these can affect system design and provides delegates with an insight in selecting appropriate backflow prevention devices. We can deliver the CPD at your works, or we run various days at our offices.

Email: sophie@arrowvalves.co.uk Email: sophie@arrowvalves.co.uk

Email: sales@swegonair.co.uk Telephone: 01746 761921

Telephone: 01442 823123

Telephone: 01442 823123 MODERN BUILDING SERVICES SEPTEMBER 2018 61

VAN GUARD VAN LOCKS Have you had your van broken into? Or been the victim of tool theft?

DEADLOCK

HOOKLOCK

Protect your van & tools with our all-new range of high-security Van Locks & security products

Market leader in Van Accessories Large range of high quality British made Van Locks All security solutions are van & door specific Shielding available for added protection of door handles SLAMHANDLE

SLAMLOCK

Installed by nationwide fitting experts

MADE FOR THE TRADE View our range of van accessories www.van-guard.co.uk

Call our UK Customer Service line 01392 368351

PIPE DREAMS

More and more homes – especially new-builds – rely on plastic plumbing systems. Adam Pearson, Product Manager at Polypipe Building Products, tells us why plastic is the right choice for a self-build project.

T

he majority of modern homes rely on plastic plumbing systems, rather than legacy materials.

In almost all plumbing projects, plastic pipes and fittings are instrumental to a properly functioning water system.

Many leading manufacturers are committed to using plastic due to its many benefits and versatility. Plastic systems are ideal for most domestic hot and cold water plumbing and heating installations, offering exceptional durability and longterm performance. > LIGHTWEIGHT SYSTEMS

Plastic plumbing and heating pipe coils are typically light in weight compared to alternative systems, while their flexibility makes them much easier and quicker to install. As an added bonus, manufacturers like Polypipe offer pipes that are flexible enough to be plumbed straight, in longer runs, without needing to wrangle with a pipe that attempts to return to its original coil shape during installation.

To claim your free sample of PolyMax register at www.polypipe.com/maxsample

The pipe’s natural flexibility means it can be bent easily to avoid obstacles and fit even the most awkward of positions, and is especially useful for a new bathroom fit-out or extension.

There is a growing range of fittings available from the major manufacturers in the sector, ensuring a solution to any challenge can be found on the shelves of respected plumbers and builders’ merchants. > POLYMAX PUSH-FIT One of these fittings is the Polypipe PolyMax, a push-fit fitting offering maximum reliability and minimum fuss. The fittings are locked into place with a collet locking clip incorporating stainless steel teeth as part of a leak-proof, reliable system, but can be released using a specially designed release tool if the system needs to be changed.

By using advanced plastic plumbing systems that are designed for ease of use, whatever the skill of the installer, the quality of the final system does not need to be compromised.

This makes it an ideal system for plumbing apprentices and more experienced hands alike, especially in the tight spaces that are common with bathroom projects.

There has also been great investment and progress made in plumbing system components with a simple ‘fit and forget’ ethos central to many advances in the marketplace.

Polypipe also offer a variety of domestic waste traps and soil ranges to enable simple fitting and compatibility with plastic systems.

?

DID YOU KNOW? PLASTIC PLUMBING SYSTEMS OFFER LOW NOISE TRANSMISSION AND LOW WATER HAMMER EFFECT, PROVIDING HOMES WITH A QUIET AND EFFICIENT SYSTEM.

ELEARNING

FROM GRANT UK FOR

APPRENTICES!

The Grant UK eLearning Academy gives apprentices the opportunity to learn from the comfort of their own home, explains Anna Wakefield, Head of Marketing.

B

y the time you finish college, heat pumps and other renewable technologies will be more commonplace installations. You may even be thinking about specialising in renewable technologies when you go into business and manufacturers like Grant UK can help.

By signing up to Grant UK’s eLearning Academy, you’ll be able to develop your knowledge and learning, as and when you decide. You can choose from many different courses, each with varying levels of content. You’ll be able to enrol on to either an on-demand course or an instructor-led course.

HOT TIP TO SET UP AN ACCOUNT VISIT WWW.GRANTELEARNING.COM AND USE THIS KEY: GUKPRS0820

40

> ON-DEMAND COURSES On-demand courses can be paused so you’re able to fit your training around work or college. You can then resume the course where you left off, when you’re ready. > INSTRUCTOR-LED COURSES Instructor-led courses are presented live by one of Grant UK’s Trainers who are on hand to answer questions, delivering the high level of quality training that is expected from the Academy.

H IP I AUTUMN 2 0 2 0 I E L E ARN IN G

During the current post-lockdown era and beyond, the eLearning Academy provides a virtual alternative to our usual face-to-face training which will help make product training more accessible.

Also available on the platform are other useful resources, such as articles and helpful guides, of which you’ll want to take advantage.

For more info visit www.grantuk.com

Heat pump training, anytime, anywhere, with the Grant eLearning Academy Develop your knowledge of air source heat pumps and open up your business to new opportunities within the renewables market, all from the comfort of your own home.

Taking the first step to installing heat pumps has never been easier.

Simply register using the unique enrolment key below

Access on-demand training at any time or enrol on to a real time instructor led course

Complete a course and automatically receive a certificate as evidence of your training

Flexible training.

Anytime. Anywhere.

www.grantelearning.com ENROLMENT KEY: GUKPRS0820

SMART

SECURITY

Homeowners are increasingly investing in the latest security measures to ensure their homes remain safe in their absence. In the third part of this series, Natalie Bird, Category Manager at Graham Plumbers’ Merchant, looks at how installing Google Nest’s indoor and outdoor security cameras can benefit customers.

A

ccording to the Home Office’s report, the average UK burglary costs a combined £3,030 in possessions, emotional trauma and lost productivity, with the Office for National Statistics publishing that 42% of those burglaries take place while no-one is home. A survey of ex-thieves conducted by Co-op Home Insurance found that smart technology is the biggest deterrent from burglary, with 89% of respondents stating they would avoid targeting smart homes.

It’s important that tradespeople understand the range of smart security products they can offer to their customers to ensure they know what’s happening in their own homes no matter where they are. > INSTALLATION Installing a smart security camera network provides peace of mind as it allows users to remotely access live feeds and receive automated activity alerts when sensors detect motion or conspicuous sounds. The Google Nest indoor and outdoor security cameras, for example, enable 24/7 live 130º views in 1080p HD video even at night-time. Through the Nest app users can receive Activity Alerts with an image of what has happened

when the network detects sound or movement. With the talk and listen function, users can also respond through their home system to interact with visitors and even pets.

An additional Nest Aware subscription lets users add further security measures including creating additional Activity Zones to detect motion surrounding important areas.

With the more advanced Nest Cam IQ range, Supersight allows the camera to automatically zoom in and follow a person’s movements anywhere within its view. The intuitive Nest Cam IQ also comes with person alerts included as standard without the need for a Nest Aware subscription.

“Installing a smart security camera network provides peace of mind for customers”

To find out more about the Google Nest range of products, visit: g.co/store To download the Graham Smart Technology Guide, visit: www.grahamdirect.co.uk/online-catalogues/

42

H IP I AUTUMN 2 0 2 0 I S M AR T S EC URI T Y

TEST YOUR KNOWLEDGE

BOILER

PARTS

Think you know boiler parts? Alpha Heating Innovation has provided the following multiple choice questions to test your knowledge. See how many you can get right!

01

02

03

I provide a safe exit for products of combustion. I can be high, or low… but never too close to a window!

I help to maintain correct pressure in the heating system, regardless of whether the boiler is hot or cold.

I exchange information between the various electronic components of the boiler.

A Power supply cable

A Condensate discharge pipe

A Printed Circuit Board

B Safety valve discharge

B Automatic air vent

B Temperature sensor

C Flue terminal

C Expansion vessel

C Low water pressure switch

ANS:

ANS:

ANS:

04

05

06

I transfer heat from burning gas to water, which then circulates radiators. In an Alpha boiler I’m made from stainless steel.

I control the amount of gas that flows to the burner.

You’ll need me for a boiler service or repairs, so keep me handy!

A Multifunctional gas valve

A Hi-viz vest

B Air pressure switch

B Manufacturer’s instructions

C Gas isolation lever valve

C Plenty of digestive biscuits

ANS:

ANS:

A High efficiency pump B Primary heat exchanger C Burner tube ANS:

Go to hip-magazine.co.uk to find the answers 44

H IP I AUTUMN 2 0 2 0 I T E S T YO UR KN OWL E DGE

LOW MAINS WATER PRESSURE

SOLVED!

Here, Stuart Turner provides solutions to low mains water pressure.

U

nvented systems rely on the mains water supply to directly feed the combi boiler or pressurised hot water cylinder. Water is then heated and circulated around the home. Unfortunately, poor incoming mains water pressure can result in a first-floor bathroom being unable to provide a decently powered shower.

For more info, please visit: www.stuart-turner.co.uk

Stuart Turner #POWERINGWATER

> THE SOLUTION Stuart Turner’s solution is their WRAS-approved Mainsboost™ system.

There are three products to choose from (displayed below), which can fit neatly within a kitchen cupboard:

“A Mainsboost™ system allows homeowners to run multiple appliances without a reduction in water pressure and flow”

1

2

3 > MAINSBOOST ™

> MAINSBOOST ™ FLOMATE

> MAINSBOOST ™ IBOOST

For smaller properties, designed to boost incoming water pressure by an additional 1.5 bar and ensures flow does not exceed the 12 ltr/min UK water regulation limits. Available in a variety of sizes.

Designed as a fully integrated system and combines a 200 litre storage tank with a high performing multistage pump. iBoost units are available in either fixed or variable speed controls, typically operating at 60 ltrs/min at 3.0 bar pressure.

46

H IP I AUTUMN 2 0 2 0 I LOW M AIN S WAT E R PRE S SU RE

For larger properties with more occupants, where demand for simultaneous delivery of large volumes of water may be higher. Sizes range from 100 to 1000 litres and can provide flow rates of up to 80 ltrs/min. Where water supply has a pressure of at least 2.0 bar but poor flow, the Mainsboost™ system will boost water performance throughout the property allowing unvented systems to work at their optimum.

PLUMBER PROFILE: JAMES ANDERSON

Ever wondered what it’s like to go viral on Twitter?

James Anderson made national headlines thanks to a tweet praising his work. He’s since raised thousands to provide free plumbing services to elderly and disabled people.

HIP Magazine: How did you get into plumbing?

James Anderson: I started plumbing around 19 years ago when I was made redundant in my previous job.

HIP: What is the best thing about the plumbing industry?

JA: You can meet many different people from every background and no two jobs are the same. It gives you a sense of satisfaction when you make that big impact on people and their lives.

HIP: What first inspired you to set up your non-profit company DEPHER?

HIP: What’s the most rewarding thing about what you do?

JA: The most rewarding thing is the smile and happiness when you leave the property, knowing that they are not just safe and warm but protected from rogue traders and scammers because they become part of our DEPHER family.

JA: I felt humbled and astonished when the tweet went viral. I did not expect this at all, I’m glad it has though because we have now helped hundreds more and inspired others to do the same.

HIP: How are you encouraging plumbers to join DEPHER? JA: I hope a lot do join DEPHER. We have sent information packs to many plumbing and heating companies that have joined the DEPHER initiative to provide this service in their areas.

HIP: Can young plumbers and apprentices join DEPHER? JA: My ambition is to start a DEPHER Community Programme for school leavers who can train as tradespeople while learning the principles of DEPHER. This will not only help with their career, it will also improve the respect in their community for everyone.

HIP: Do you employ any apprentices?

HIP: What’s the next step for DEPHER? JA: The next step for DEPHER is to become a national player in the industry and to champion the community and the vulnerable that are left behind. Building trust with the public is massively important to us.

HIP: What one piece of advice would you give to those just starting out in the industry?

JA: It is the quality of your behaviour and your service that is most important to a customer. Cost does play a big part but a customer would rather have a person, not a robot, and a company that is available at any time. Trust, honesty and transparency are what people are looking for.

@depheruk

JA: I was inspired to establish DEPHER because an elderly and bedbound gent was scammed out of £170 and nearly a further £5,500 for work he did not need doing. This made me think of all the elderly and disabled people in the UK and what could happen to them.

HIP: How did you feel when the tweet praising your work went viral?

JA: We take day learners from Lancashire County Council and will be pushing for funding to enable us to create apprenticeships.

Here's the invoice which went viral on Twitter

48

H IP I AUTUMN 2 0 2 0 I PLUM B E R PRO F IL E

h s i B h s a B h s o B

ts

duc o r p n of o i t u sol e c s. i t m c e a t r s p g sy est n b i t e a t ple r he Com rvices fo e and s

Ensure heating systems are given lifetime protection, simply get in touch with us and find out more:

www.sentinelprotects.com

WILO'S SOLUTION TO

DEAD LEGS!

Ever stood at the sink for ages waiting for the water to get warm? A secondary hot water circulator, called the WiloStar-Z NOVA T, can be fitted on the return that circulates the hot water around the system and back into the cylinder.

T

his constant circulation of water allows the temperature within the system to be maintained and allows for fast delivery of hot water at the outlet. This circulation can be critical if the system has long periods of no draw off that would allow a traditional system to cool. > THE ADVANTAGES

The Wilo-Star-Z NOVA T is simple and easy to use, providing individual setting options to achieve high hygienic safety and low power consumption.

Ball valve on the suction side

5

High hygienic safety, thanks to proven technology with stop valve, automatic thermal disinfection detection, integrated timer and thermostat

KEY FEATURES New design with thermal insulation shell as standard

1

Optimised energy efficiency with improved motor technology and power consumption of only six Watts

6 2

Non-return valve on discharge side

7

3

Quick and easy installation, thanks to stop valve and Wilo-Connector > WHERE CAN I SEE HOW IT WORKS? You can check out @Plumberparts’ YouTube video ‘Hot Water Takes A Long Time To Reach Taps How To Get Hot Water Faster!’ to see the pump in action!

50

H IP I AUTUMN 2 0 2 0 I WI LO

High operating convenience due to GreenButton-Technology, intuitive user interface with known symbols and LC display

4 For more info, please visit: wilo.com/gb/en You can also find Wilo on

Learn online wherever you are Our Training Academy Facebook Group is a handy hub to access valuable learning whenever it suits you.

Just search Worcester Bosch Training Academy on Facebook and take your learning to the next level.

With regular posts covering a wide range of topics and products, such as how to videos, guides, quizzes and more! It means you can keep on top of things – wherever you are.

Come and join us: bit.ly/WBTrainingFB

THINKING OF BECOMING

A HEAT PUMP

INSTALLER? Good choice! There were about 22,000 heat pumps installed in the UK in 2017 (Source: BSRIA), an 18% increase from the previous year – yet currently, there are only around 600 MCS-registered heat pump installers. So, the demand for heat pump installers is huge!

C

heck out the four key differences between a boiler installer and a heat pump installer:

“Demand for heat pump installers is huge!”

> 1 CERTIFICATION It’s desirable, and sometimes essential, for heat pump installers to be qualified with the MCS quality assurance scheme, proving competence.

MCS is also required for Renewable Heat Incentive (RHI) benefit.

Split air source heat pumps (rather than monoblocs) require F-Gas certification, unless subcontracted out, because outdoor and indoor units are connected with refrigerant pipework. > 2 INITIAL ASSESSMENT Providing an estimate can take just 10 minutes but does require consideration of suitability. Existing radiators need checking as HP’s operate at lower flow temperature; heat pump sizing based on heat loss and not hot water demand; space for a cylinder or buffer; and suitability for a low-temperature system, remembering the boiler can be kept as back-up.

If output is 11 kW or more, it may need three-phase power, which could make installation prohibitively expensive.

52

> 3 HEAT LOSS CALCULATION Online tools can help with heat loss calculations of all rooms, windows and insulation, and considerations for heat emitters, making it possible to offer an estimate to the customer of running costs and RHI payments. > 4 THE INSTALLATION Fitting pipes, valves and electrical work is familiar to boiler installers, though internal pipework will usually need to be larger. Hydraulic balancing is recommended so the system runs at the correct operating temperature.

There are a few differences, such as bigger radiators or underfloor heating for lower flow temperatures.

Weather compensating controls are mandatory in MCS-approved work and noise levels must be assessed to ensure the heat pump

H IP I AUTUMN 2 0 2 0 I HE AT PUM P S

Vitocal 200-A

isn’t causing disturbance to the householder or neighbours.

Installing a heat pump system (apart from replacing any radiators) can be done in just one day.

ACT NOW!

For more info, book yourself onto a FREE one-hour ASHP webinar with Viessmann www.viessmann.co.uk/hip

PREVENT LIMESCALE

Combimate from Cistermiser is a thoroughly proven limescale prevention device, designed to protect appliances in hard water areas and also reduce the effects of soft water corrosion

Suitable for single appliance or whole-house water supply installations, Combimate keeps pipework clear and energy costs down. Fit Combimate, to help homeowner clients...

££ SAVE ££ Combimate

Combiphos Refill Pack

User-friendly domestic limescale prevention device, for 15mm or 22mm pipework

800g of Combiphos spheres for annual service top-up

(Models: COM1 and COM2)

(Available from Trade outlets)

Cistermiser Limited Unit 1, Woodley Park Estate, 59-69 Reading Road, Woodley, Berkshire, RG5 3AN.

T: +44 (0) 118 969 1611

E: sales@cistermiser.co.uk

www.ourworldiswater.co.uk

#HelloPro

Britain’s favourite pipe carrying product for plumbers, just got better.

• • • • •

New - Optional PVC lining.

New - O-ring seal to reduce water ingress.

New - Integral lock housed inside the tube.

New - Aerodynamic nose cone.

Plus - Dual openings. Independently crash tested.

Industry leading capacity. 3 metre length.

Available now!

T. 0151 319 2931 E. sales@rhinoproducts.co.uk www.rhinoproducts.co.uk

Rh no PR

D U C T S

®

WORKING FOR YOU

“

“

…an excellent example of how to make plumbing work as hassle-free as possible.

Professional Heating & Plumbing Installer Magazine

Olive Splitter 15 - 45mm

£

44

.16 EX VAT

NTED TE

N

Vinyl-tipped winding T-handle

Strong steel construction

PA

Cuts olive without damaging pipe

D E SI G

Experience you can trust in professional plumbing tools, consumables and accessories.

20

nt food restaura Favourite fast KFC

QUESTIONS

WITH THE PEAKY PLUMBER Based in Huddersfield, Lee Brown is an experienced heating engineer specialising in commercial and domestic gas work.

We asked him our 20 Questions.

Favourite tool ?

Milwaukee im pact gun, as I’v e been doing a lo t of commerci al pumps lately

?

rch Best bit of branded me ? you’ve received keeps it uk Milwa ee travel mug – urs warm for a good three ho

Most useful superpowe r for a plumber?

The ability to see throu gh ceilings/floorboards etc

If you weren’t a plumber, what would you be?

I’d like to still be in the army

What’s the best packed lunch combo?

Pork pie, black pudding and scotch eggs

If you could ha ve any animal as a pet, what wou ld you have?

It would have to be my dog Max . Check out @maxpeak heating on Twitt er :)

Last book you read co ver-to-cover?

Black Ops by Chris Ryan

PEAKY PLUMBER

Favourite way to exerc ise?

Running

Worst haircut you’ve ever had?

Not had hair in 30 years so can’t remember!

Did bleach once and looked like Eminem!

Biggest influence on yo ur career?

Probably my mother, wh o taught me about a good, honest wo rk ethic

er is in Describe what a plumb ? rds wo three The Electricianʼs Hero!

What is your favourite smell?

Bacon

?

Top five items on a fry-up re mo n, co Black pudding, ba bacon, sausage, eggs plumbers?

Best tip for apprentice sy! bu k loo Always

Tell us something you think everyone should do at least once in their lives?

Something that scares them

rty trick?

What is your pa ith er bottle top w Removing a be re a tape measu

Scariest thing you’ve ever done?

I almost died rescuing someone in the Sheffield floods Least favourite task to do on the job?

Tasting the customer’s tea!

@thepeakyplumber

Which trade is the me ssiest on-site?

Decorators

will and nobody Cover it up .. t. ou ever find

Which

is mo re up setti kink ng or th the e zip ties?

F O HALL

E M A SH H IATION WIT

IN ASSOC

d lly qualifie eers are fu n gi o n h e w g n and heati s out there plumbers me cowboy While most are still so re disastrous. e e th b , n b eat jo results ca e th d n and do a gr a ful job ur regular do a dread bring you o e w s, rt ework a lumberp rs, poor pip tion with P ddy showe o sh g n In associa si ca orrors, show bbish radiators. gallery of h and ru

Friday afte rnoon What a cork er

56

H IP I AU TUMN 2 0 2 0 I H AL L O F S H AM E

Looks

legit

job?

APPRENTICE If your phone is anything like ours then it’ll be full of apps, some of which you don’t even use. er comes with When your gas met e a problem hav you t, moa a

HIP looks at the best apps available so your phone is all killer, no filler.

ADEY ProClub Lovely ho memade flushing system

The app monitors magnetite capture in filters you’ve connected to and alerts you if there’s a serious sludge build-up.

Keep a record of the jobs you complete and access ADEY’s videos, literature, product selector and savings calculator.

By connecting, you can register warranties for MagnaClean Professional3 Sense filters you’ve installed - which also means you can earn rewards like high street vouchers and ADEY merch!

they l you e tel c wn? i o m d w d is ho turne Is th ting a e h the want

If you’ve come across a dodgy installation, send your pictures to us and they could be featured on this page!

You can email us at tom.tracey@sng-publishing.co.uk A big thank you to James at Plumberparts for supplying us with so many great photos. You can stay up-to-date on the Plumberparts website or YouTube channel, or on social through Instagram, Twitter and Facebook.

Free on App Store and Google Play.

A PP - RE N T I C E I AU TU MN 2020 I H IP

57

Mercedes-Benz Approved Used Vans Know exactly what you’re getting into.

When you’re just starting out in your career, it’s good to know that someone’s got your back. So, when the time comes to look for a vehicle, you can be reassured to know that Mercedes-Benz Approved Used vans offer the same commitment to quality and workmanship as new.

No older than 6 years Fewer than 150,000 miles on the clock Full service history Minimum of 3mm tread depth on all tyres 12-month MOT Up to 24-months warranty

Discover more about our Approved Used vans at mbvans.co.uk

†BUSINESS USERS ONLY. Qualifying vehicles only.

Mercedes-Benz Approved Used Vans Mechanical Breakdown Insurance Corrosion warranty renewal Free 24/7 MobiloVan roadside assistance† 10 day exchange period Mercedes PRO connect vehicle management tool with every van Complimentary 7-day insurance cover

CIPHE EXERCISES

We’ve been lucky enough to collaborate with the wonderful Chartered Institute of Plumbing and Heating Engineering (CIPHE), who have provided these exercises to support your studies. With a membership of more than 7,500 industry workers, CIPHE is the professional body for the UK plumbing and heating industry.

If you would like to know more about how one of CIPHE’s courses could help further your career, check out the website: www.ciphe.org.uk

IDENTIFY THE TOOL Can you identify the tools we’re talking about from the following descriptions?

Q1

Push and clamp on the body, rotate and cut the tube.

Answer: ...............................................................................................................................................................

Q2

Open the lever arms, place the tube into the former.

Answer: ...............................................................................................................................................................

Q3

Rotate the cast aluminium body onto the bottle, twist the button and click.

Answer: ...............................................................................................................................................................

Q4

Locate the hexagonal end over the long threaded bar and rotate to tighten.

Answer: ...............................................................................................................................................................

Q5

Place the jaws around the joint and press the trigger until the clicking stops.

Answer: ...............................................................................................................................................................

Q6

Place the soft grip handles into the hand and slide them apart for adjustment.

Answer: ...............................................................................................................................................................

Q7

This thin right angle bar has a locator lug at one end and you then rotate to tighten.

Answer: ...............................................................................................................................................................

Q8

There is a small gauge, tubes and a bellow interconnected to use this.

Answer: ...............................................................................................................................................................

Q9

This oblong metal tank has a lever arm, gauge and hose.

Answer: ...............................................................................................................................................................

Q10 It has a gauge and water channel down one side of the vessel!

Answer: ...............................................................................................................................................................

Go to hip-magazine.co.uk to download exercise answers for free

60

H IP I AU TUMN 2 0 2 0 I E XE RC IS E S

BATHROOMS, SHOWERS AND TAPS Try to answer the following multiple-choice questions.

Q1

Which Water Regulation covers a WC float valve?

Ans.

Q4

Identify the correct safe water temperature for an unassisted bath?

a

AUK1

a

50ºC

b

AUK2

b

44ºC

c

AUK3

c

38ºC

Q2

When installing a standard bath, the height is set by which method?

Ans.

Q5

How do you fix a floor mounted, concealed fixings, back to the wall pan?

a

Taking an average inside leg measurement of the occupants

a

Rawl bolts into the floor

b

To be set within the size of the tiles

b

Through the side of the pan and into brackets located inside

c

Set out against the bath panel height

c

Strong sand and cement mixture

Building Regulation Part G (G 3) states Q3 that a bath must have a thermostatic blending valve installed when… a

A building is converted (material change of use)

b

On a new-build project

c

In care homes

d

All of the above

Ans.

Q6

A thermostatic mixer shower should be set at which maximum temperature?

a

38ºC

b

48ºC

c

43ºC

When installing a shower mixer valve, Q7 the standard pipe centres are set out at which distance apart? a

250mm

b

175mm

c

150mm

Ans.

Ans.

Ans.

Ans.

Go to hip-magazine.co.uk to download exercise answers for free

E X E RC I SE S I AU TU MN 2020 I H IP

61

The hot and cold water supplies to a Q8 thermostatic shower valve are positioned as:

Ans.

When installing a back to the wall WC Q11 and a seat that has concealed fixings, you must carry out what process?

a

Hot on the left and cold on the right

a

Hammer in the rubber plugs for the seat to locate first

b

Cold on the left and hot on the right

b

Fix the seat before the pan is positioned

c

Cold on the left and hot on the bottom

c

Fix the seat as the last job

Identify which of the following hand basin taps must have single Q9 check valves fitted when supplied on unbalanced pressure. a

Monobloc basin taps

b

Three-hole basin mixers

c

Wall-mounted basin mixers

d

All of the above

Q10

Identify the correct height to fix a washbasin without a pedestal.

a

Between 500mm and 550mm

b

Between 800mm and 850mm

c

Between 1m and 1.2m

Ans.

Ans.

Ans.

Go to hip-magazine.co.uk to download exercise answers for free

BES HIP cat ad W210xH74mm 20 NEW PRINT.pdf

1

26/06/2020

15:09

Plumbing, heating and gas supplies... FAST!

NEW

CATALOGUE OUT NOW!

100s of PRICE REDUCTIONS

Over 15,000 products

FREE next day delivery*

Order online

bes.co.uk Call free

Quality products

LOW prices

0800 80 10 90

THE BEST HOMES ARE GRUNDFOS HOMES SUPERIOR WATER SOLUTIONS FOR HOMES AND GARDENS

CT AND INDU DU ST O PR FOR R

P

ge

led w. gru

w

FOR THE LAT ES T

w

w

YU

FOS D N U R G LEDGE KNOW

TES PDA

SIGN U

n dfos.co.uk/

kn

o

Follow us @Grundfos

GRUNDFOS HAS EVERYTHING YOU NEED Your customers deserve the best and we can help you make sure they get it. Our superior solutions are designed for easy installation and cover the full range of domestic applications – from water supply to wastewater removal and everything in between.

Explore the range at www.grundfos.co.uk

PRESSURE BOOSTING

AMAZON

SCALA2

Premium quality brass shower Perfect water pressure pumps and boosters - for up to 3 floors and 8 taps

HOT WATER RECIRCULATION

UPS 15-50N

Follow us @Grundfos_UK

WASTE WATER

SOLOLIFT2

WRAS approved domestic Reliable, quiet macerators hot water recirculator - easy to install and service

DRAINAGE

UNILIFT CC

Submersible drainage pump with low water protection

How are balanced pressures Q12 best achieved in a domestic plumbing system?

a

b

c

Ans.

Take the cold water from the mains supply and the hot from the cylinder distribution pipe

Take the cold water from the storage cistern and the hot from the cylinder distribution pipe

Take the cold water from the storage cistern and the hot water from the combi

Why is the hot supply on the right and Q13 cold on the left?

Many taps now have flexible pipe connections. When tightening the Q14 supplies to the pipes, care must be taken. Identify from the list below two correct methods. a

Slight bend

b

Curved around

c

Angle

d

Twist

e

Kink

Ans.

Correctly identify the best type of tool to install a one-hole basin tap.

a

It’s stated within BS-806-2 Design

b

Because most people are left handed

a

Swivel head tap spanner

c

Because we had cold water before hot water

b

Box spanner

d

It’s best practice for the blind

c

Long reach pliers

Q15

Go to hip-magazine.co.uk to download exercise answers for free

64

H IP I AU TUMN 2 0 2 0 I E XE RC IS E S

Ans.

Ans.

LEARNER OF

THE MONTH

We’ve shaken up the format of the HIP Learner of the Month award!

T

LEARNER

he award, which is open to all full-time learners and apprentices, aims to celebrate the amazing work that upcoming talent in the industry is producing.

OF THE MONTH

There is a prize usually worth £100+ for the winner each month – and you will feature in our online Hall of Fame and in the next issue of HIP!

HOW HOW IT IT WORKS > BETWEEN THE 1ST AND 20TH OF A MONTH Tag us in a new photo of your best work on Instagram, Facebook or Twitter – use #HIPLOTM. Any entries later than the 20th will roll over into the following month. > BETWEEN 21ST AND 23RD OF A MONTH We will choose our favourite entries (up to a maximum of eight). > ONE WEEK BEFORE THE END OF THE MONTH We will share the top entries on the @hipmagazineuk Instagram page to allow our followers and your friends, family, clients and colleagues to vote for your image. > ON THE LAST DAY OF THE MONTH We will reveal who has got the most votes and therefore won!

For T&Cs head to our website.

APRIL WINNER

AUGUST WINNER

HARRY PEGLER, SGS COLLEGE / COTSWOLD FLAME

JAYDEN ROSE, CHOICE TRAINING / PIMLICO PLUMBERS

Harry was our final winner of the award in the previous format. Harry, who won an Amazon Echo Dot and a Yonos PICO from award sponsor Wilo, says he has been helping his dad - a heating engineer - with bits of work since he was seven!

Due to the lockdown we rolled over the first ‘new’ award from May to August. Jayden won the award, which saw hundreds of votes cast for each of the six entrants, with an image showing an unvented hot water cylinder and pipework install.

“

He said: “I tried plumbing and took to it. I enjoy the challenge and how it constantly keeps you thinking. There are also lots of routes for progression.”

“

He said: “It feels good that people recognise my hard work and pride in plumbing.”

Jayden won a slimline towel rail from sponsor Stelrad.

“Tag us in a new photo of your best work on Instagram, Facebook or Twitter – use #HIPLOTM”