BIGGER BIGGER BIG TOOL BIG TOOL POWER POWER
1,355NM 1,355NM Breakaway Torque
Snap-on Impact Wrenches
• 3 Torque Settings – 25%, 50% and 100%
• Encaged Motor – adding protection
• Resin Encased Electronics – provides drop resistance and limits any electronics coming loose
• Uses Centrifugal Force to generate and maintain power – meaning our impact wrenches keep their power over their entire lifetime
• Thick Durable Battery Terminal Connections – meaning your battery stays connected and delivers power longer than the competition
18V 1/2" Drive MonsterLithium
Cordless Impact Wrench Kit CT9050U2
• Kit comes with a tool, 2 batteries & charger
Even the most stubborn fasteners don't stand a chance against 1,355nm torque from the Snap-on CT9050 Impact Wrench – and it will keep on punching, day in day out.
1,085nm Continuous Torque
2,000rpm Rotational Speed
1/2"
15pc 1/2" Drive 6-Point Metric Flank Drive®
Shallow Impact Socket Set (10-24mm) 315IMMYA
• Flank Drive® wrenching system delivers up to 20% more turning power without slipping or rounding while exceeding ANSI® performance standards
15pc 1/2" Drive 6-Point Metric Flank Drive® Deep Impact Socket Set (10-24mm) 315SIMMYA
• The hex depth of our impact sockets will start to thread the nut onto the stud; competitive sockets with a deeper hex require the user to start the nut by hand
• Snap-on® impact sockets are heat-treated to optimise impact service life with a lower hardness than hand sockets
18V MonsterLithium Cordless Blower
CTAB9050
• Get the job done with a maximum air speed of 100 mph
• Maximum air volume of 450 CFM and 14,800 RPM for quick turnaround time
• Run-time is approximately: High, 10min; Low, 20 min
• 15’ clearance range
• High/Low switch for proper air speed
18V 5Ah MonsterLithium Battery with Dual Side Latches
CTB185
18V 5Ah MonsterLithium Ion Slide-On Battery
CTB8187
• No self discharge, will not lose charge when idle
• Four built-in LEDs indicate battery charge state
• No memory effect
• 90-minute charge time
18V MonsterLithium Cordless Vacuum
CTVAC9050A
• 2.5-gal wet or dry tank eliminates the need for two specialised vacuums
• Powerful 18V motor delivers 59 CFM to handle a wide range of material
• Industry-leading suction is ideal for broken glass, coins, sand and more
• Oversize power switch is easy to use, even with gloves
• X-long 6’ hose can double in length so it can reach further into applications
• 3-1 utility nozzle is 4-1/2" wide and includes a dust brush and silicone upholstery brush for pet hair
100mph Air Speed 11L Capacity
14.4V and 18V Dual Bay Charger
CTCEU131A
• Dual bay: Charges 14.4V MicroLithium and 18V Lithium batteries sequentially
• Integrated USB port charges phones and small electronic devices
• LED fuel gauge indicator: Indicates the state of the battery charge
• Low profile: Great for tool storage
• Wall mountable: Easy to hang for out-of-the-way use
14pc Soft Grip Long Punch & Chisel Set
PPCSGL714/ G/ DT
• Includes 4 flat edge chisels, 5 pin punches, 4 starter punches and a center punch in a storage tray
• Cutting edges on chisels are hand ground for a consistent, quality edge
• Black oxide coating prevents chipping
• Handle features a molded crown to protect from off-center hammer strikes
• Semi-spherical striking area controls mushrooming, reduces chipping and splitting
• Unique folding design makes it easy to carry products when changing jobs
• 19 x 24" carrier lays flat to keep tools and parts in view, unlike traditional tool bags
• Carbon fiber vinyl surfaces can take wear and be wiped clean
With a 14pc Punch & Chisel Set
8oz Ball Peen Soft Grip Dead Blow Hammer HBBD8/ G/ DT
• Includes 4 flat edge chisels, 5 pin punches, 4 starter punches and a center punch in a storage tray
• Cutting edges on chisels are hand ground for a consistent, quality edge
3 Meter Metric Tape Measure TPM3M
• Blade has durable nylon wrapping to prevent wear Grab-N-Go Carrier and Surface Protector
• High-density injection-molded case with TPR overmold
• Magnet on side for attaching to metal surfaces
• Pocketable design is small enough to easily carry
• Automatic locking brake mechanism
• Tape rule is printed on both sides for multiple measuring applications
• Raised surface keeps tools and parts from rolling
125 Lumen Penlight with Mouthpiece
ECPNH012
• Two-click power button; first click for 50lm and second click for 125lm
• Comfortable, replaceable mouthpiece on the end for hands-free use
• Wacker R250 silicone rubber mouthpiece is FDA compliant
• Detachable clip
• Compact and lightweight
700 Lumen Project Light
ECPRA072AUK/ GUK/ OUK
• Built with aircraft-grade aluminum alloy to last in the toughest environments
• Variable brightness switch (0-100%) gives the ability to select the right amount of light for every situation
• 10-hour operation time on low; 1-hour on high
• IP65-rated for water and dust resistance
• Battery “fuel gauge” provides the ability to instantly know how much power is remaining
500 Lumen Fresnel Dual-Source Project Light
ECPRM052
• 500 lm floodlight with 450 lm focus light
• Press the power button to change the light—click once for floodlight and twice for focus
• On high setting, floodlight runs for 2.5 hours; focus light runs for 3 hours
• Fresnel lens makes the focus high intensity with no edge
• 360° rotating base with strong magnet for hands-free use
• Cutout face design reminds the user the light is on even when placed face down
COAST Steel Frame Knives
COAKNIFEPK2025
• Introducing Snap-on COAST steel frame knives
• Premium build, detailed construction, everyday usability
• Heritage looks with modern performance
• 3.25" drop point stainless steel blade
• Double lock safety adds an extra layer of safety and confidence when using your blade
3pc Instinct® Trim Pad Tool Set
ASG103BR
• Remove fasteners that secure door panels and trim pieces without damage to panel or trim
• Soft grip handles with contour thumb stop
• Distinct pivot point is designed for appropriate leverage and to discourage twisting that may damage panel or trim piece
• Includes ASG185BR, ASG186BR and ASG187BR (3pc) in a storage tray
2pc Dished Tip Soft Grip Trim Pad Tool Set
ASGD102BR
• Smooth dish profile and wide gap fit vehicles utilising conical x-mass retainers for quick removal without damage
• Dished blade for better door panel clip and retainer contact
• Soft grip handle for comfort and control
• Chrome finish helps prevent corrosion and facilitates cleanup
• Includes ASGD1BR and ASDGL1BR (2 pc) in a storage tray
Blue-Point® Aviation Tin Snips, Left Cut
AVSNP01010
• Serrated edges help create stable bite and prevent slippage
• Chrome-Molybdenum steel forged blades provide greater strength and durability
• Solid and comfortable handle grips with nonslip design
• High tensional strength spring designed for longer life
• Center fastener provides high-tensile strength and longer life of tool
• Quick and easy spring-free automatic latch design allows one-handed release for better safety and convenience
• Meets ANSI® and DIN standards
Blue-Point® Aviation Tin Snips, Right Cut AVSNP01020
BLUEPOINT KITS BLUEPOINT KITS
Blue-Point® HVLP Spray Gun (1.4mm) BLPK14HVLP
• High Volume Low Pressure (HVLP) technology
• Letting you paint at reduced pressures to minimise overspray and conserve paint.
• An aluminium body allows this spray gun to be both sturdy and long-lasting.
• Ideal for use with shellac, dye stains, lacquer, and water-based finishes.
• The gun features fluid and air control knobs, providing precise fingertip adjustments during stenciling and blending.
• It also includes a fan control that enables you to expand the spray pattern, making it easier to cover larger areas efficiently.
Blue-Point® Multi-Piece Lockout Kit LOS145C
• Includes three-piece door unlocking tool that screws together with a connector sleeve for easy assembly and storage, plus two plastic wedges & a plastic slim jim to create a gap between door and frame without damaging door
• No danger of airbag activation or disconnected door linkages
• Actuate the door handle, manual lock button, or electric lock button on 98% of all cars and trucks
Blue-Point® 5pc Door and Trim Panel Tool Set UTS105A
• Includes UTV614A-UTV618A door and trim panel tools
• Inflatable wedge easily separates door from body without damage to the vehicle
• Handle end can be used to enter through the window and grab the lift button
Blue-Point® Windshield Removal Tool YA109C
• Steel cable pull handle
• Replaceable steel cutting blades can be resharpened
• For GM®, Chrysler® vehicles and other vehicle makes with windshields set in place with sealant
Blue-Point® 9pc Soft Grip Locking Plier Set BSGLP909A
• Set contains a wide selection of curved jaw, long nose, straight jaw and clamp locking pliers
• Includes 5", 6" ,7" ,9" and 10" options for plier sets
• It also includes two 6" and 11" options for C-clamps
Blue-Point® 5/16" Hex Reversible Ratcheting Bit Set SHORTORX
• Low head clearance for access to tight spots
• Internal ring in square drive provides more secure bit retention than magnetic models
• Miscellaneous uses: Remove/install water pumps, oil drain plugs and some GM® fender parts
Blue-Point® 8pc Automotive Door Hinge Removal Set
DHS108
• Door hinge applications include VW®, Audi® and early model Ford® Escort vehicles
• Applications on Audi®, VW® and Mercedes® vehicles—plus Mercedes® rear toe adjustment and head bolts on early models
• Set includes DHW1 ratcheting bit wrench, triple square sockets (6-12mm) and TORX® sockets (T30-T45)
Blue-Point® Rivet Tool
HPS202
• Head swivels 360° to rivet at any angle
• Fastens metal, leather, canvas and vinyl
• Sets 3/32, 1/8, 5/32 and 3/16" rivets
• Four interchangeable nosepieces store in handle when not in use
Blue-Point® 4pc Spot Weld Cutter Set
SWDK4
• Patented self-centering tip prevents walking
• Operates at speeds up to 2,000 RPM
• Much faster than hole saw cutters
• Leaves a clean hole with minimal need for grinding
BE YOUR OWN BOSS NOW FOR JUST £9K!
BE YOUR OWN BOSS NOW FOR JUST £9K!
For the first time in the history of Snap-on Tools, we’re giving you the opportunity to become a Snap-on franchisee for just £9k* plus working capital - that just means the money you need whilst setting up your business.
For the first time in the history of Snap-on Tools, we’re giving you the opportunity to become a Snap-on franchisee for just £9k* plus working capital - that just means the money you need whilst setting up your business.
WHAT YOU GET:
*
What’s more, we could help fund the rest of the purchase of your franchise. After all, who better to get finance from than the people who truly understand your business! As part of this amazing incentive, we’re also offering two years interest free!**
What’s more, we could help fund the rest of the purchase of your franchise. After all, who better to get finance from than the people who truly understand your business! As part of this amazing incentive, we’re also offering two years interest free!**
WHY BECOME A FRANCHISEE? Glad you asked!
> Start-up costs reduced to just £9k*
WHAT YOU GET:
> Help-to-buy scheme in-house with first two years interest free2
> Start-up costs reduced to just £9k*
> On store support for the first 4 weeks
> Help-to-buy scheme in-house with first two years interest free2
> New start support plan
> On store support for the first 4 weeks
> Dedicated Field Support Team
> New start support plan
> Dedicated Head Office Team with over 150 staff
> Dedicated Field Support Team
> Dedicated Head Office Team with over 150 staff
> Monthly franchise forum, annual conference and legendary Tool Show!
> Monthly franchise forum, annual conference and legendary Tool Show!
> Be your own boss!
WHY BECOME A FRANCHISEE? Glad you asked!
> Own and run a business you can love
> Be your own boss!
> Franchisee paid sales average of £400,682 in 2024!***
> Own and run a business you can love
> No royalty fees to pay
> Franchisee paid sales average of £400,682 in 2024!***
> No royalty fees to pay
> Join a network of over 400 likeminded professionalsthere’s quite simply nothing like being a Snap-on franchisee!
> Join a network of over 400 likeminded professionalsthere’s quite simply nothing like being a Snap-on franchisee!
If start-up costs or affordability have ever been a barrier to becoming your own boss, then this is the time for you to act!
If start-up costs or affordability have ever been a barrier to becoming your own boss, then this is the time for you to act!
Simply scan the QR code and send us your details to learn more. Limited time offer, once it’s gone, it’s gone!
Simply scan the QR code and send us your details to learn more. Limited time offer, once it’s gone, it’s gone!
• Two 50" wide drawers provide plenty of space to organise long extensions, prybars, or families of tools in the same drawer
• Monoprene vibration reducing casters provide a whisper quiet ride
• Corner gussets are welded into each corner to keep the unit square for a lifetime of use
• Heavy-duty 14-gauge bottom panel with caster stiffener to support loads on rough floors
• Lock 'N Roll drawers prevent unwanted drawer opening when moving Why does your workshop need an Apollo+
• Top Repairs: Displays the most common repairs for the code and vehicle based on mileage
• Technical Service Bulletins: Direct from the OEM based on fault code and vehicle
• Smart Data: Custom PID lists specific to Fault code & vehicle. With pre-set parameters
• Functional Test & Reset Procedures: Verifying component operation and detailed reset procedures to complete the repair
• SureTrack Real Fixes: Is based on billions of repair records, giving you real fixes carried out before, based on fault code and vehicle
