ZEUS+ FEATURES
Fast-Track® Troubleshooting Workflow
Over 1.2 M Guided Component Tests
Built-in Snap-on Information System – No need for additional subscription
Wireless 4-Channel Scope Module
Wireless Compact Scan Module
•
•
•
4 Drawer Blue-Point® Collapsible Cart
KRBCKCL40BN / BFI / BET
It has a load capacity of 100kg,2x pull out draws with 30kg slides and Lock n Roll latches, 4x 1" swivel casters for easy movability, plus, you can adjust the height of each shelf to fit your tools and needs round the workshop £734.40
Top three drawers are 50" wide and 5", 3" and 4" deep to organize a professional assortment of sockets, wrenches, and essential tools
Extreme Green with Emerald Green Trim, Bedliner & Blackout Badges
55" Classic Roll Cab and Workcenter Stack BOX14221454ZOR / BOX14221454ZCC
• The KRA1422 is designed with a, higher profile (taller) than previous models, offering 10 drawers that maximize storage in a smaller footprint (ideal for compact bays)
• Upgraded runners hold 102 Kg, with the top two drawers featuring double runners that can handle a massive 204 kg each, allowing storage for heavy diagnostic tools.
MASTER BALL JOINT PRESS SET
22 pc Master Ball Joint/Universal Joint Press Set BJP1
• Services domestic and foreign vehicle applications with press-in ball joints
• Applications cover more than 315 individual vehicle models* up to 2022; more than 680 individual ball joints**
• 14 additional adaptors available to increase coverage by 30 models and over 100 unique ball joints
• Eight additional adaptors available to service lower control arm compliance bushings on Subaru® and Honda®/Acura® applications
• Additional adaptor for specially designed for Dodge® U-joints available
• Removes and installs ball joints with straight grease fittings installed
• Forged C-frame with large throat and vise mount capability for U-joint applications
• Snap-ring retention locks the adaptors to the frame while maneuvering tool
Universal Puller Set Kit ITCUPSA
• Universal toolset for extracting and drawing bushes, bearings and seals; ideal for suspension arms of vehicles.
• Contains 20 sleeves: ID 34-72mm / OD 44-82mm. 2 X step plates & 4 X pulling spindles with thrust bearings.
• “U” shaped slots on the sleeves to help see the progress of the removal/installation.
• Can be used on a vehicle or in a press.
Brake Caliper Wind-Back Tool Set
BTCWSO16KT
• Bi-directional for standard and reverse threaded windback brake calipers
• Kit contains 16 adaptors to cover the majority of vehicles with wind-back style calipers on the road today
• Works on both front and rear brake calipers
• Forcing screw has large, knurled boss which is rotated by hand to engage adaptor
• The nut is keyed to the plate to prevent rotation of the nut
• 24mm hex on forcing screw used to return pistons on standard type caliper
•
•
•
• Black phosphate coating helps protect against rust
• Includes clip and rails for storage
20pc Brake Caliper Press ITC3916B
• Enables the rewinding of pistons back into the bore on most disc brake calipers
• Service and replace worn pads on both wind back and push back type brakes
• Includes wind back tool for use on right and left hand threads
•
•
Blue-Point® 100pc 1/4" and 3/8" General Service Set
2100MBPGSSUK
Set includes:
• 1/4" 6pt Sockets (4 - 13mm)
• 1/4" 6pt Deep Sockets (4 - 13mm)
• 3/8" 6pt Sockets (10 - 24mm)
• 3/8" 12pt Deep Sockets (10 - 24mm)
• 1/4" Slotted Bit Socket (4 - 6.5mm)
• 1/4" Philips Bit Socket (0, 1, 2, 3)
• 1/4" Pozidriver Bit Socket (0, 1, 2, 3)
• 1/4" Hex Bit Socket (3 - 8mm)
• 1/4" Torx Bit Socket (T10 - 40)
• 3/8" Ratchet / 1/4" Ratchet
• 1/4" and 3/8" Universal Joint
• 1/4" Extension (1-1/2", 3")
• 3/8" Extension (3", 6", 10")
• 1/4" and 3/8" Flex Handle
• 3/8" Spark Plug Socket
• (16, 21mm)
• 3/8" F x 1/4" M Adapter
• 3/8" Sliding T-Handle
• Wrenches (10 - 19mm)
77pc 3/8" Metric General Service Set
277MBPGSSUK
Set includes:
• 6pt Sockets (6 - 24mm)
• 12pt Deep Sockets (6 - 24mm)
• Sockets (E4 - E20)
• Philips Bit Socket (3,4)
• Pozidriver Bit Sockets (3,4)
• Hex Bit Socket (6-10mm)
• Torx Bit Socket (T10-45)
• Ratchet
• Spinner Handle
• Universal Joint
• Extension (3",6",10")
• Flex Handle
• Spark Plug Sockets (16,21mm)
• F x 1/2" M Adapter
• F x 1/4" M Adapter
• Sliding T-Handle
Digital Tyre Inflator
TPGDL2000 / GRN / DT / MB
• Reads tyre pressure from 0-200 PSI in 0.1 PSI increments
• ±1% full-scale accuracy for precise inflation
• Backlit display, with PSI, kPa, bar and kg/m² scales
• Lifetime Warranty on hose, gauge & valve
Heavy-Duty Digital Tyre Inflator
TPGDL2000HD
• Designed for the HGV Tech - 6' hose with swivel connector & 12" dual-foot angled chuck with rubber coating to access inner tyre valve stems on twin wheel set-ups
EXTRA LONG HOSE
Dial-Type Tread Depth Gauge
TDG2M
• Oversized dial allows for much easier reading than stick-type tread depth gauges
• Geared interior movement for increased ruggedness
• Reads in 1/32" increments and has a color-coded dial design
TAKING TRADES ON HEAVY LIFTERS
3 Tonne Quick Lift Trolley SNX3-4BP
• Specially designed pump allows the pivot arm to go from lowered position (100mm) to meeting the load in just 4 pumps
• Low Height: 102mm, Raised Height: 495mm
• Length: 710mm, Width: 368mm, Handle Length: 1,282mm
2.5T Aluminium Race Jack SNX25ARJ
• Light weight aluminium race jack
• Min height: 95mm
• Max height: 485mm
• Dual pump for a quick lift 5-5 pumps to full height
1/2" Torque Wrench (70-350 NM) QE3RN350 / R
• Redesigned hardened chrome CAM and spring for improved durability and calibration retention; 7,500 cycles between tool recalibration
• Improved manufacturing process increased overall torque application accuracy to ±3% clockwise from 20-100% full scale
• 80-tooth gear with dual pawls allows for reduced swing arc enabling the technician to use within tighter areas with less clearance
• Includes plastic storage case and calibration certificate ±3% TOOL RECALIBRATION 7500 CYCLES
