ZEUS+ FEATURES
Fast-Track® Troubleshooting Workflow
Over 1.2 M Guided Component Tests
Built-in Snap-on Information System – No need for additional subscription
Wireless 4-Channel Scope Module
Wireless Compact Scan Module
•
•
•
4 Drawer Blue-Point® Collapsible Cart
KRBCKCL40BN / BFI / BET
It has a load capacity of 100kg,2x pull out draws with 30kg slides and Lock n Roll latches, 4x 1" swivel casters for easy movability, plus, you can adjust the height of each shelf to fit your tools and needs round the workshop
Top three drawers are 50" wide and 5", 3" and 4" deep to organize a professional assortment of sockets, wrenches, and essential tools
Extreme Green with Emerald Green Trim, Bedliner & Blackout Badges
55" Classic Roll Cab and Workcenter Stack BOX14221454ZOR / BOX14221454ZCC
• The KRA1422 is designed with a, higher profile (taller) than previous models, offering 10 drawers that maximize storage in a smaller footprint (ideal for compact bays)
• Upgraded runners hold 102 Kg, with the top two drawers featuring double runners that can handle a massive 204 kg each, allowing storage for heavy diagnostic tools.
MASTER BALL JOINT PRESS SET
22 pc Master Ball Joint/Universal Joint Press Set BJP1
• Services domestic and foreign vehicle applications with press-in ball joints
• Applications cover more than 315 individual vehicle models* up to 2022; more than 680 individual ball joints**
• 14 additional adaptors available to increase coverage by 30 models and over 100 unique ball joints
• Eight additional adaptors available to service lower control arm compliance bushings on Subaru® and Honda®/Acura® applications
• Additional adaptor for specially designed for Dodge® U-joints available
• Removes and installs ball joints with straight grease fittings installed
• Forged C-frame with large throat and vise mount capability for U-joint applications
• Snap-ring retention locks the adaptors to the frame while maneuvering tool
Universal Puller Set Kit ITCUPSA
• Universal toolset for extracting and drawing bushes, bearings and seals; ideal for suspension arms of vehicles.
• Contains 20 sleeves: ID 34-72mm / OD 44-82mm. 2 X step plates & 4 X pulling spindles with thrust bearings.
• “U” shaped slots on the sleeves to help see the progress of the removal/installation.
• Can be used on a vehicle or in a press.
Brake Caliper Wind-Back Tool Set
BTCWSO16KT
• Bi-directional for standard and reverse threaded windback brake calipers
• Kit contains 16 adaptors to cover the majority of vehicles with wind-back style calipers on the road today
• Works on both front and rear brake calipers
• Forcing screw has large, knurled boss which is rotated by hand to engage adaptor
• The nut is keyed to the plate to prevent rotation of the nut
• 24mm hex on forcing screw used to return pistons on standard type caliper
•
•
•
• Black phosphate coating helps protect against rust
• Includes clip and rails for storage
20pc Brake Caliper Press ITC3916B
• Enables the rewinding of pistons back into the bore on most disc brake calipers
• Service and replace worn pads on both wind back and push back type brakes
• Includes wind back tool for use on right and left hand threads
•
•
Blue-Point® 100pc 1/4" and 3/8" General Service Set
2100MBPGSSUK
Set includes:
• 1/4" 6pt Sockets (4 - 13mm)
• 1/4" 6pt Deep Sockets (4 - 13mm)
• 3/8" 6pt Sockets (10 - 24mm)
• 3/8" 12pt Deep Sockets (10 - 24mm)
• 1/4" Slotted Bit Socket (4 - 6.5mm)
• 1/4" Philips Bit Socket (0, 1, 2, 3)
• 1/4" Pozidriver Bit Socket (0, 1, 2, 3)
• 1/4" Hex Bit Socket (3 - 8mm)
• 1/4" Torx Bit Socket (T10 - 40)
• 3/8" Ratchet / 1/4" Ratchet
• 1/4" and 3/8" Universal Joint
• 1/4" Extension (1-1/2", 3")
• 3/8" Extension (3", 6", 10")
• 1/4" and 3/8" Flex Handle
• 3/8" Spark Plug Socket
• (16, 21mm)
• 3/8" F x 1/4" M Adapter
• 3/8" Sliding T-Handle
• Wrenches (10 - 19mm)
77pc 3/8" Metric General Service Set
277MBPGSSUK
Set includes:
• 6pt Sockets (6 - 24mm)
• 12pt Deep Sockets (6 - 24mm)
• Sockets (E4 - E20)
• Philips Bit Socket (3,4)
• Pozidriver Bit Sockets (3,4)
• Hex Bit Socket (6-10mm)
• Torx Bit Socket (T10-45)
• Ratchet
• Spinner Handle
• Universal Joint
• Extension (3",6",10")
• Flex Handle
• Spark Plug Sockets (16,21mm)
• F x 1/2" M Adapter
• F x 1/4" M Adapter
• Sliding T-Handle
Digital Tyre Inflator
TPGDL2000 / GRN / DT / MB
• Reads tyre pressure from 0-200 PSI in 0.1 PSI increments
• ±1% full-scale accuracy for precise inflation
• Backlit display, with PSI, kPa, bar and kg/m² scales
• Lifetime Warranty on hose, gauge & valve
Heavy-Duty Digital Tyre Inflator
TPGDL2000HD
• Designed for the HGV Tech - 6' hose with swivel connector & 12" dual-foot angled chuck with rubber coating to access inner tyre valve stems on twin wheel set-ups
Dial-Type Tread Depth Gauge
TDG2M
• Oversized dial allows for much easier reading than stick-type tread depth gauges
• Geared interior movement for increased ruggedness
• Reads in 1/32" increments and has a color-coded dial design
3 Tonne Quick Lift Trolley SNX3-4BP
• Specially designed pump allows the pivot arm to go from lowered position (100mm) to meeting the load in just 4 pumps
• Low Height: 102mm, Raised Height: 495mm
• Length: 710mm, Width: 368mm, Handle Length: 1,282mm
2.5T Aluminium Race Jack SNX25ARJ
• Light weight aluminium race jack
• Min height: 95mm
• Max height: 485mm
• Dual pump for a quick lift 5-5 pumps to full height
±3% TOOL RECALIBRATION 7500 CYCLES
1/2" Torque Wrench (70-350 NM) QE3RN350 / R
• Redesigned hardened chrome CAM and spring for improved durability and calibration retention; 7,500 cycles between tool recalibration
• Improved manufacturing process increased overall torque application accuracy to ±3% clockwise from 20-100% full scale
• 80-tooth gear with dual pawls allows for reduced swing arc enabling the technician to use within tighter areas with less clearance
• Includes plastic storage case and calibration certificate
