ER
E
EL
★C
- Y OU R L O C A L L
19 12 I NC E
DS
AR RY
MB LU
UM BE
$
K
★
AR
CAL
D★
100% LO
CL
YEARS
MEA D
Compound Miter Saw w/Laser #XSL06PT. Cuts up to 6-5/8" crown (nested), 5-1/4" base (vertical), and crosscuts a 4x12 at 90°. X2 LXT® technology delivers up to 334 cuts per charge in 2x4 SPF lumber using two 5.0Ah batteries. INCLUDES : (2) 18V LXT® 5.0Ah batteries, dual port rapid charger, blade, dust bag, vertical clamp, wrench and triangle.
L
Y ON
77999 X2 36V 10" Dual-Bevel Sliding
109
NI A
BE
$
G O U R CE NT E N
&
Sale Good Through December 12th
IN AT BR
24900
Folding Miter Saw Stand
Buy any M Saw get akita Miter Stand f $a #WST06 or 99 $ 150 sav that’s a ings!
#WST06. A versatile and portable solution for increased mobility. It has a compact and lightweight aluminum tubular design for less weight (only 33.7 lbs.), with transport wheels and side handle that allows the miter saw and stand to be transported around the job site. Material support extensions that extend up to 100-1/2” with a maximum supported weight of 500 lbs.
$
41999
8-1/2” Slide Compound Miter Saw
$
#LS815F. Powerful 10.5 AMP direct drive motor requires less maintenance and delivers 5,000 RPM. Miters 0°- 50° left and 0°- 60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 50° (left and right) plus 60° (right).
15899
7/8" Rotary Hammer
$
#XRH04Z. Variable speed motor delivers 0-1,200 RPM and 0-4,000 BPM. 3mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications. One-touch sliding chuck for quick bit changes. Chisel rotates 360° with 40 different positions. Compact and ergonomic design at only 16-3/8" long and weighs only 7.7 lbs.
$
10’ Compound Miter Saw #LS1018. Large cutting capacity in a compact design and less weight. Powerful 13.0 AMP direct drive motor requires less maintenance and delivers 4,300 RPM. Miters 0° - 47° left and 0° - 60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° (left and right).
$
195 143
$
18V LXT® Lithium-Ion Dual Port Rapid Optimum Charger #DC18RD. Charges 2 batteries simultaneously. Built-in USB port for charging portable electronic devices.
$
73999
12" Dual-Bevel Sliding Compound Miter Saw with Laser #LS1219L. Unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. Increased vertical cutting capacity of baseboard (63/4”) and crown molding (8” nested). It will also make 15” crosscuts at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right).
9799 18V LXT®
Lithium-Ion Compact Recipro Saw, Bare Tool #XRJ01Z. Variable speed (0 - 3,000 strokes per minute) combined with a 1/2" stroke length for faster and more efficient cutting. Dual-position on/off switch allows for either paddle or trigger switch operation. It 15-5/8" long; weighs only 3.9 lbs without battery.
FR Impac EE XDT15R1 B t purch Driver Kit w a Limite se of XT328 ith M. d to st o c k on hand
10999
18V LXT® Lithium-Ion Recipro Saw, Bare Tool #XRJ04Z. Variable speed motor delivers 0-2,800 strokes per minute and a 1-1/4" stroke length for faster cutting. Weighs only 8.3 lbs. with battery (battery not included). Electric brake, and “tool-less” blade change for faster blade installation and removal
$
H H
15299 18V LXT®
Lithium-Ion Sub-Compact Brushless Recipro Saw, Bare Tool
$
20799
18V Brushless Recip Saw, Bare Tool #XRJ05Z. Electronically-controlled BL Brushless motor that matches torque and RPM to the application, and is powered by the industry fastest charging 18V Lithium-Ion batteries (sold separately). Long 1-1/4” stroke length increases cutting efficiency.
439
18V LXT® Lithium-Ion Brushless Cordless 3-Pc Combo Kit
#XRJ07ZB. Compact and ergonomic design at only 121/2” and 5.7 lbs. (with 18V LXT® Compact 2.0Ah battery, battery and charger sold separately). The compact size makes it ideal for work in tight spaces, and is a welcome solution for plumbers, electricians, and more.
$
MEAD CLARK LUMBER
#LS1019L. With up to 6-5/8” capacity (crown molding, nested) jobs like cutting base-boards and crown molding are a snap. It can cut 4x4 dimensional lumber in one pass. It's ideal for fine woodworking, carpentry, general construction, and more. 15 AMP direct drive motor.
$
$
H
60999
10" Dual-Bevel Sliding Compound Miter Saw with Laser
4-spd Brushless Impact, Bare Tool #XDT16Z. Quick shift mode uses the Brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening. Delivers 3, 600 max RPM and 1, 600 inches pounds of max torque and 4 speed power selection.
47999
END OF YEAR TOOL SALE
TOOL SHLE H H
$175 Value FREE!
#XT328M. 4.0Ah. Variable 2speed 1/2" Hammer DriverDrill, Variable speed Impact Driver, Recipro Saw. Includes (2) 18V LXT® Lithium-Ion batteries, Rapid Optimum Charger and tool bag.
FREE WITH PURCHASE 18V LXT® Lithium-Ion Sub-Compact Brushless Cordless Impact Driver Kit #XDT15R1B.
The right information. The right materials. The right lumberyardsm
LUMBER AND BUILDING
MATERIALS SINCE 1912
Hearn Ave. & Dowd Dr. H Santa Rosa H 707-576-3333 H www.meadclark.com H Mon-Fri 7 to 5 • Sat 8 to 5 • Sun 9 to 4 Visa, Discover, Mastercard & American Express Welcomed H All items FOB yard and store - limited to stock on hand H Prices may vary after December 12, 2021 We reserve the right to correct printed errors H Photographs represent merchandise offered, but may not be exactly as shown H ad design ©2021 AdverGraphics
$
32699
The Bull 2 HP Compressor
25999
$
#FC2002. 4.3 gallon tank. 8.7 cu.ft. displaced, 4.1 CFM @ 90 psi. 2 HP, 3400 RPM, S-1 rated for continuous duty, low-amp draw, overload protection with manual reset, 115 Volt, 60 Hz, Heavy-duty/Industrial-grade with ball bearings for greater durability.
Super Quiet Compressor #JC10. 1 HP. 2.5 gallon. One of the quietest and most reliable air compressors on the market today. Oil-less design reduces maintenance and downtime.
2-1/2” 16 Ga Finish Nailer 2” Brad Nailer
#AF601
#AF505N
$
Buy any one of these 4 Rol-Air Compressors, get a FREE AF601 and AF505N, plus a compressor kit. Limited to stock on hand . $300 value FREE!
97399
9-Gallon Twin Tank Compressor #5715k. Capable of running on a 20 Amp breaker, this model will deliver 7.3 CFM, doubling the output of many direct-drive units. Additionally, the low-RPM pump and motor combine for quiet operation.Dual-voltage induction motor that operates on either 115-volts or 230-volts.
$
$
1,26682
6.5HP 9 Gal Wheelbarrow Compressor
#6590. Delivering 13.8 CFM @ 90 PSI, this unit incorporates a 196 cc 4 cycle Honda engine with automatic idle-down, for increased fuel efficiency, and an atmospheric unloading system to prevent oil consumption.
World's Safest Mobile Saw
36999
Miter Saw Stand #T4B. Gravity-rise wheeled stand. Integrated out feed and supports up to 18’ of material. Adjustable telescoping leveling leg provides stability on uneven surfaces. Universal mounting system for use with all major competitors' saws.
Saw not included
59699 10” Glide Miter Saw
$
#CM10GD. Dual-Bevel. Expanded cutting capacity: 12” horizontal capacity; 5-1/2” vertical capacity against the fence (base); 6 “ crown capacity against the fence (45° spring). Large form fitting ergonomic handle provides comfort for all-day use.
646
$
99
49999 Single-Bevel
$
Slide Miter Saw Bare Tool #GCM18V. Portable, powerful 18V, 8-1/2” miter saw design – a truly mobile jobsite solution. Pro capacity – delivers 3-5/8” nested crown cutting, with 47° left to 47° right cuts against fence and 10-5/8” crosscuts. Performance optimized 18V Li-ion battery, engineered to deliver power and runtime for ideal performance-to-weight ratio.
12” Glide Miter Saw
#GCM12SD. Dual-Bevel. Axial-Glide™ System durable precision – consistent precision over tool life; compact workspace – saves up-to 12 In. workspace; glide action – unmatched smoothness of cut.
499
$
99
Limited to Stock on Hand 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand #4100XC-10. 5-Amp saw with 4.0 max HP and 3,650 rpm, for rip-cutting and cross-cutting of fine and rough materials. Large cast aluminum top with a 30 In. ripping capacity. GTA47W GravityRise Wheeled Stand for easy jobsite mobility, with single-action setup and take down.
2699
$
4699
ProSensor Stud Finder
ProSensor Deluxe Stud Detector
#PST6. 6 sensors, resulting in more detection area and deeper, accurate detection. Just press the button and scan to find studs instantly.
$
#PS710. Uses Multi-Sense Technology to find studs more accurately through difficult surfaces.
$
155
13" Laminate Flooring & Siding Cutter Gen2
144609 10” Jobsite Pro Table Saw
$
#345806. Upgraded PRO model featuring an improved dust collection blade guard, deeper table and versatile low fence. towed dimensions: 26 1/2" L x 29" W x 45" H. Class-leading table Depth: 24 5/8” means better accuracy and easier, safer cutting. One Turn Elevation: Raise and lower the blade in just one turn on the hand wheel.
How It Works The blade carries a small electrical signal. When skin contacts the blade, the signal changes because the human body is conductive. The change to the signal activates the safety system. An aluminum brake springs into the spinning blade, stopping it in less than 5 milliseconds! Power to the motor is shut off. Resetting the saw yourself is easy. Simply replace the blade and affordable brake cartridge and your saw is operational. The entire reset process takes less than five minutes.
8376
$
Table Saw Brake Cartridge for 10-Inch Blades #345801. This is the Standard SawStop brake cartridge for 10" saw blades. It fits all models of SawStop table saws (except for older models). Current SawStop models use cartridges with blue tinted plastic cases and 9-pin connectors.
$
Dado Brake Cartridge #345802. Use the Dado Brake Cartridge with 8 in. dado sets. The brake cartridge is compatible with all woods and other non-conductive materials. Dado brake cartridge stops the spinning blades on contact with skin reducing the chances of a catastrophic injury.
Buy one 6 and get a F 44044 RE skid kneep E non#644099 an ad set pack of 13” d 1 FREE rep ment bladelaces #644020.
#644044. Cuts a variety of material, including Fiber Cement Board*, HardiePlank®, Laminate & Vinyl Flooring, Engineered Wood Flooring, Vinyl Tile & Siding up to 19/32” thick *up to 3/8” thick. Sliding extension table supports longer boards 41” working length
The right information. The right materials. The right lumberyardsm
10259
#345803 Standard Blade
$
2797
#345804 Dado Blade
$
2900
Zero Clearance Insert Precision machined from a high-quality, ultra strong phenolic core material. Provides protection around the blade and eliminates the gap between the blade and insert, reducing the chance of having thin stock fall under the table while making the cut.
LUMBER AND BUILDING
MATERIALS SINCE 1912
Hearn Ave. & Dowd Dr. H Santa Rosa H 707-576-3333 H www.meadclark.com H Mon-Fri 7 to 5 • Sat 8 to 5 • Sun 9 to 4 Visa, Discover, Mastercard & American Express Welcomed H All items FOB yard and store - limited to stock on hand H Prices may vary after December 12, 2021 We reserve the right to correct printed errors H Photographs represent merchandise offered, but may not be exactly as shown H ad design ©2021 AdverGraphics