FABTECH Canada FAB LAB Schedule at a Glance

FAB LAB Schedule at a Glance Tuesday March 20 11am

12pm

Wednesday March 21

Thursday March 22

Canadian Metalworking

Topic: State of Metalworking Industry

Presenter: Jim Anderton, Editor

Description: Meet Canadian Metalworking Editor Jim Anderton and discuss current industry issues, such as technology, regulation, offshoring, skilled labour and the industry outlook for 2012

Quality NDE Ltd.

Linde Canada

Quality NDE Ltd.

Topic: Weld Inspection using Phased Array Ultrasound Presenter: Ed Cabral, National Manager, Canada, USA, Sonatest Inc.

Topic: Shielding gases - Key to a productive welding process Presenter: Todd Israel Welding Specialist - Linde Canada Limited

Topic: Magnetic Particle Inspection

Description: By utilizing Phased Array UT versus Conventional UT you will achieve faster inspection of welds, increase flaw detection, sizing and dimensioning, better weld characterization and reproducible results. AWS D1.1 Inspection using Phased Array.

Description: Welding is a complex manufacturing technology, which often requires a holistic approach in order to realize significant savings in production time and cost. Unfortunately, for shielding gas, it is often seen as an inevitable necessity for the gas shielded welding processes and a simple commodity,

Description: Detection of surface defects in components, welds etc. including discontinuities that are too small to be seen with the naked eye, and those that are slightly sub-surface.

Presenter: Mark Adams, Ontario Manager, Quality NDE

This event will discuss that the shielding gas in fact has a direct influence on the welding process, and that its accurate selection always has a major impact on the quality and productivity; consequently turning the shielding gas into a process gas, and a necessary evil into a valuable tool.

1pm

2pm

Autodesk

Topic: Simulation in today’s product development process

Topic: Mobile and Cloud Computing within Manufacturing

Topic: Simulation in today’s product development process

Presenter: Daryl Corelli, Autodesk Manufacturing Technical Specialist

Description: Model-based simulations aren’t just for analysts anymore. More and more companies are demanding that design validation become a part of every product development process. As the technology gets faster, more flexible, and less expensive, it’s never been easier to ask the right questions about your products performance. How fast is too fast? What happens if I use a different material or size? Use this discussion to learn about how simulation and analysis can help everyone

Description: Massive growth in mobile access and cloud computing is changing the way businesses communicate. Whether it’s internal communication between engineers, designers, and sales teams, or external communication between you and your customer, mobile and cloud competing is poised to make your information available to more teams, more quickly, and more easily. Are you ready to take advantage of these next generation communication tools? Do you know what opportunities are available for you today?

Description: Model-based simulations aren’t just for analysts anymore. More and more companies are demanding that design validation become a part of every product development process. As the technology gets faster, more flexible, and less expensive, it’s never been easier to ask the right questions about your products performance. How fast is too fast? What happens if I use a different material or size? Use this discussion to learn about how simulation and analysis can help everyone

Linde Canada

TRUMPF

FLOW INTERNATIONAL CORP.

Topic: Shielding gases - Key to a productive welding process Presenter: Todd Israel Welding Specialist - Linde Canada Limited

Topic: CO2 lasers vs. solid-state lasers in 2D cutting Presenter: Stefan Schreiber, Managing Director, TRUMPF Canada

Topic: How to cut faster and more accurately with waterjets. Presenter: Joe Bodorkos, Regional Manager, Applications Specialist

Description: Welding is a complex manufacturing technology, which often requires a holistic approach in order to realize significant savings in production time and cost. Unfortunately, for shielding gas, it is often seen as an inevitable necessity for the gas shielded welding processes and a simple commodity,

Description: Comparison and explanation of CO2 and solid-state lasers as it applies to 2D laser cutting. Overview of the advantages of each technology in laser cutting.

Description: Discussion on how waterjet technology has changed over the past decade to allow for faster and more accurate cutting

This event will discuss that the shielding gas in fact has a direct influence on the welding process, and that its accurate selection always has a major impact on the quality and productivity; consequently turning the shielding gas into a process gas, and a necessary evil into a valuable tool.

3pm

4pm

FLOW INTERNATIONAL CORP.

Topic: How to cut faster and more accurately with waterjets. Presenter: Joe Bodorkos

Regional Manager, Applications Specialist

Description: Discussion on how waterjet technology has changed over the past decade to allow for faster and more accurate cutting

Simufact-Americas

Topic: Simulation of Bulk Sheet Metal Forming

Presenter: Arjaan Buijk

Managing Director, Simufact-Americas

Description: The unique characteristics of bulk sheet metal forming will be explained, and it will be discussed how these processes can be simulated on the computer with Simufact.forming, using a continuum approach. Practical examples will be given, like the one shown below, and the benefits of simulation to your organization will be highlighted:

Turn static files into dynamic content formats.

Create a flipbook