Why Turbo-Mist? booklet by Slimline Manufacturing

WHY

INTELLIGENT AGRICULTURAL SPRAY TECHNOLOGY

Engineered for the Future 1-800-495-6145

www .slimlinemfg.com

ENGINEERED FOR YOUR INDUSTRY.

With 60 years of multi-crop growth behind us, Turbo-Mist™ sprayers remain at the forefront of innovation. Anticipating and leading the drive toward improved environmental sustainability for every acreage, every crop, and every sprayer application, we are engineering a better future for growers.

TURBO-MIST™ AGRICULTURAL SPRAYERS

Turbo-Mist™ Sprayers are engineered to eliminate drift, reduce operating costs, decrease ecological footprint and increase yield. Our patented Airblast technology maximizes sprayer airflow while restricting chemical recycling and waste, creating precision coverage while protecting your crop. Portable, durable and customizable, Turbo-Mist™ sprayers are engineered for a long and highly productive future.

3 AGRICULTURE

PLUME PRECISION

WASTE REDUCTION

SAVES TIME. SAVES MONEY. INCREASES YIELD.

GOT DRIFT?

Spray drift is the most common and constant challenge for growers of every crop variety, and neighbors aren’t keen on it either! Spray drift means your equipment isn’t targeting properly, isn’t calibrated properly, or is over-blasting the plume. In all of these cases, your money is literally vaporizing. Turbo-Mist™ sprayer technology optimizes coverage, ensuring maximized solution usage, improving deposition and reducing or eliminating drift, all while saving you money.

HOW DO I MITIGATE DRIFT? 2

CONTROL AIR DIRECTION

CALIBRATION

NOZZLING

GEAR UP THROTTLE DOWN

ELIMINATE WASTE. IMPROVE COVERAGE. SPRAY “LOBBED” INTO TARGET = IMPROVED COVERAGE

SPRAY BLASTED THROUGH TARGET = WASTED SPRAY

COMPETITOR

TURBINE TECH

OPTIMIZE SPRAY PRODUCT INCREASE YIELD SAVE MONEY

Turbo-Mist™ Airblast technology maximizes airflow while restricting chemical recycling and waste. Our patented turbine technology is designed to prevent the loss of air consistency throughout the RPM range of the fan output, allowing you to slow the speed of the fan while retaining consistency. This allows for accurate targeting of airflow, maximizing coverage at a lower horsepower, saving fuel and increasing yield.

PATENTED TURBINE TECHNOLOGY

CONSTANT AIR BEHAVIOUR WITH VARIABLE RPM INCREASED TARGETING CAPABILITIES CLEAN DEBRIS-FREE AIR - ELIMINATE SANDBLASTING ON SOFTER FRUIT

TURBINE TECH

CONTROLLING AIR DIRECTION PREMIUM AIR QUALITY Our front air intake turbine design compresses air to guarantee even distribution through both outlets. Our nozzles are mounted out of the airstream to provide unobstructed air that shears the water. The turbine is engineered to draw clean air from between the tank and the fan housing, producing clean, non-contaminated air that doesn’t recycle the spray. This increases equipment safety, reduces dust and debris circulation, and results in accurate solution distribution and maximum crop protection. Designed with air straighteners, our system allows the machine to suck in twice as much air as it exhausts, building pressure within the outlets to produce maximum air flow for the fan, ensuring air consistency and premium air quality. The fan is precision machined to maintain a blade clearance of 50 thousandths of an inch to retain and control air pressure and improve overall performance.

DURABILITY The cast aluminum fans prevent rust and deterioration, ensuring durability and reliability for the lifetime of the sprayer. We use a heavy-duty flange on an isolated gearbox to absorb operational effects and prevent the transfer of mechanical vibrations. While ensuring superior air quality and consistency, this also protects the gearbox and its major components, reducing maintenance and increasing the lifespan of the equipment.

ENGINEERED TO PERFORM TANK. TESTING. FABRICATION.

We use stainless steel tanks for their reliability, durability, and long-term cost savings. Our tanks permit mechanical agitation, keeping solution in constant suspension and removing any issues with pump capacity, allowing you to take advantage of the Gear Up Throttle Down (GUTD) method and save on fuel.

LONG TERM SAVINGS.

PROVEN DURABILITY + RELIABILITY = NO DOWNTIME

TESTING

Every Turbo-Mist™ sprayer undergoes rigorous quality assurance testing at each stage of the fabrication process. Our sprayers are dyno-tested to ensure a horsepower output that results in a quieter and more efficient process and vibration analyzed for quality control to ensure maximum reliability in our product. We ensure each component part has been tested to prevent and reduce solution waste, optimize air quality and control, and ensure durability, quality, and consistency.

FABRICATION

You only need to set your eyes on a Turbo-Mist™ sprayer to see the quality in fabrication- but the true quality runs much deeper. From custom cut parts that reduce metal strain and prevent breakage to quality powdercoating and sandblasting to prevent rust, we take quality and durability as seriously as you take your crops.

WE ARE PROUD TO BE A ZERO WASTE MANUFACTURER

THE DIFFERENCE WHAT MAKES US BETTER.

OFFSET PUMP REDUCTION DRIVE SYSTEM

Our models feature our exclusive reduction pump drive system that protects the pump by slowing it down to a consistent 450 rpm rating (100 below maximum rpm), eliminating a major cause of diaphragm failure and reducing costly maintenance. We include performance features such as parts immersed in oil, stainless steel valves and seats to ensure consistent, reliable spraying coverage at all times.

ADJUSTABLE AIR DELIVERY SYSTEM

Chemical waste occurs when you aren’t able to direct the air and water to the target. Our exclusive rotating rear air outlets allow you to move the air instead of deflecting it, permitting accurate targeting.

BYPASS PROTECTION SYSTEM

Our exclusive bypass system comes standard with our control system. It prevents diaphragm failure caused by over-pressuring by diverting the excess water pressure back into the tank during non-spraying mode, reducing maintenance and downtime while maintaining accurate spraying pressure to ensure coverage on outside rows.

TANK CRADLING SYSTEM

Unlike most other manufacturers, we don’t use our tank as a structural part of the chassis. Our chassis is heavy enough to cradle the tank, allowing it to move independently of the frame during operation.

CONTROL SYSTEM

Our sprayers come standard with electric ball valves allowing you to control the left or right boom with the flick of a switch. Optional electric pressure adjust to control pressure on the fly and optional hydraulic stainless steel ball valve controls for right and left boom operation are available.

DRIVE LINE SYSTEM

Quality built L 21 spline Weasler run down clutch systems protects the working components of both your tractor and sprayer, reducing maintenance and downtime.

REGULATOR SYSTEM

Our pressure regulator is engineered with a diaphragm design, tungsten carbide relief valve and a stainless steel seat for improved durability and precision. This quality component along with our liquid filled gauge allows us to provide superior accuracy and control.

FRAME DESIGN

Our rectangular tubed frames are manufactured with the highest quality steel to handle the most rugged operating conditions. We’ve added a hand crank jack for ease of hookup and our heavy-duty axles are height adjustable to pair with the machine of your choice.

YOUR CROP. YOUR SPRAYER. YOUR CHOICE.

We offer three distinct sprayer series — Heavy, Standard, and Light Duty — each in a variety of models to best suit our customers and their unique growing needs. All models use turbines based on our patented Turbo-Mist™ airblast technology. With minimal maintenance, field service and repair costs, our products prevent downtime and maximize yield - making you as cost effective as possible.

LIGHT DUTY (LD)

TRAILER / WEEDSPRAYER / AIRBLAST SPRAYER MODELS

Ideal Use:

Hobby Farms

Our smallest and lightest sprayers are designed for operational and cost- efficiencies in the hobby farm and small-scale operation category.

STANDARD DUTY (SD)

Ideal Use: Hobby Farms - Small Scale Commercial Our Standard Duty series offers a more compact sprayer built with the same quality, reliability and features of our marketleading Heavy Duty series, with smaller turbine and tank sizes.

HEAVY DUTY (HD) Ideal Use: Commercial

Farming

Specifically designed for large growing and heavy duty applications, these units are structurally built for the additional weight of our attachments to increase productivity. This sprayer is designed to manage the same and larger acreage as our Standard Duty Series, and works faster to result in less wear and tear on equipment due to the larger tank sizes and increased spray capacity. A heavier frame and upgraded driveline/ PTO make these units great for commercial farming.

TURBO-MIST™ VERSATILITY

Your land is not the same as your neighbors, and neither are your needs. We know that your specification needs differ as much as your landscape, so we focus on giving you a variety of attachments that will help you optimize the efficiency of your Turbo-Mist™ sprayer. Achieve environmentally-friendly spraying practices by improving spray coverage and reducing drift, noise and fuel usage. Recoup your equipment investment faster through substantial chemical savings and reduced hand thinning costs.

WHY USE A TOWER?

50%= Savings on Chemicals

30%= Improved coverage

Reduce Chemical Waste

Reduce Required Sprays

Reduce or Eliminate Spray Visibility

Save Money

Reduce Environmental Concerns

OUR ATTACHMENTS WILL FIT ANY TURBO-MIST™ SPRAYER BUILT SINCE 1960. EQUIP YOUR SPRAYER WITH OUR QUALITY ATTACHMENTS AND ACHIEVE MORE, FOR LESS.

LOW DRIFT TOWER  Apples

BLUEBERRY TOWER  Berries

 Grapes  Peaches, Plums, Pears

SCORPIAN TOWER  Berries  Vegetables  Nurseries

 Nuts

HOPS TOWER  Hops GRAPE TOWER

CANNONS

Grapes

 Berries  Vegetables  Nurseries



CITRUS TOWER  Citrus fruits

TURBO-MIST ™ VERSATILITY Our high-density towers are designed to reduce drift and accommodate tight planting conditions. These stainless steel towers are adjustable for air direction and angle to ensure effective tree coverage. Tower configurations are available for both standard trees and grapes.

78" Low Drift Tower

Low Drift Tower Specs.

Our towers are available in a variety of heights.

60" Low Drift Tower

144" Low Drift Tower

One year limited warranty on all Turbo-mistTM attachments

Low Drift Tower with split booms. Split booms can be customized as per customer request.

TURBO-MIST ™ FLEXIBILITY ORCHARD HEAD Our powder coated stainless steel Orchard heads are applicable for a variety of crops and are adjustable to direct air flow. The canoe shaped outlet is designed for precise concentration of air targeted for thick foliage. The outlets are easily changeable to towers or other Turbo-Mist™ attachments.

GRAPE TOWER Designed to ensure exceptional grape quality. Accommodates single drive row or multi row through controlling the direction of sprayer outlets. Optional spray outlet adjustable arms, combined with Under Vine Blower to spray from above and below for complete coverage.

HOPS TOWER Designed with an additional set of spray outlets high in the top trellis to allow for full canopy penetration. This tower directs air up and into difficult spots while utilizing either traditional round outlets or our low drift tower as the bottom outlets. Achieve amazing coverage from top to bottom with less horsepower.

CITRUS TOWER Designed for flexibility. With adjustable top outlets and additional individually controlled side outlets, this tower can be unbolted from its frame or folded over the tank for easy storage, maneuvering or transportation with an optional hydraulic fold kit. With rear attachable jacks for storage, this tower is accommodating to your needs on and off the field.

2QH \HDU OLPLWHG ZDUUDQW\ RQ DOO 7XUER PLVW DWWDFKPHQWV

TURBO-MIST ™ FLEXIBILITY CANNONS We offer fixed (24") and hydraulic rotating (30") cannons. Requiring only 35 HP, these units are a fixed style designed to give coverage tight to the machine. Available in either short or tall configurations to suit a variety of crop applications with a reach of 60 to 90 feet.

SCORPION TOWER Designed narrow and tall to spray in tight growing conditions, the Scorpion tower is designed for maximum versatility. Whether you’re spraying a 12 or 8-foot drive, this heightadjustable attachment offers even airspeed through the opening and hits your target where you need it. Additional openings available to maximize air volume.

BLUEBERRY TOWER Designed for mature blueberry plantations to direct spray laden air to the top of the plant. Used in conjunction with our traditional air outlets, this system improves coverage both on the inside and the outside of the blueberry bush by pushing down through canes into hard-toreach areas deep within the bush.

CHERRY BLOWER Our Cherry Blowers are designed to push excess water off the fruit to help prevent splitting and water absorption by the fruit. Available in 30" and 38" diameter.

2QH \HDU OLPLWHG ZDUUDQW\ RQ DOO 7XUER PLVW DWWDFKPHQWV

TOWER POWER Revolutionizing Airblast Spraying Why you should not spray above the Canopy. • • • •

You waste money by missing your target. Environmentally, you're part of the problem, a visible part. Overspraying areas to achieve coverage in others. Repetitive sprays to achieve control.

Why use a Tower? • Save up to 50% of chemical costs due to improved coverage (reported by customers and fieldmen) Coverage is improved by a minimum of 30%. • Less sprays required, less chemical per tank, cut back and maintain control but keep the ease of using an air-blast that you're familiar with. • Reduce or eliminate your visibility. Others will not even know you're spraying with Turbo-mist Towers. • You can obtain great savings with effective chemical thinning (some customers claim they paid for their tower in the first year in hand thinning savings). • Get new technology but maintain air-blast control in the wind and do so at a reasonable price. If you own a Turbo-mist sprayer you can add this technology to your existing sprayer. Save money and be part of the solution!

More advantages of using a Tower • The ability to target the air delivery where it is needed. • Vary your spray output by changing the orifice and disc size to match the foliage pattern being sprayed. • The droplets travel a shorter distance, so that the effects of the ambient air and evaporation are small. • Air stream is blown upward at an angle of 15 degrees, the upper and lower leaf surfaces are more effectively covered with the sprayed agents.

Maximize your coverage, reduce chemical waste! Contact your local Turbo-mist™ Dealer today! Engineered for the Future 1-800-495-6145

www .slimlinemfg.com

BASIC WARRANTY COVERAGE Airblast Sprayer

12 Months

3-Point Hitch Trailer or Skid Sprayers

12 Months

Piston Diaphragm Pumps

12 Months

Centrifugal Pumps

12 Months

Diaphragms Only in Piston Diaphragm Pumps

90 Days

Diaphragms Only in Electronic Control Valves

90 Days

PTO Clutch

90 Days

We offer factory-backed OEM Turbo-Mist™ Genuine Parts to support your needs and your customers. We stand behind our product, and offer our expertise and knowledge to help you get the right parts in a timely manner. 2-Day Delivery Guarantee*

* Delivery guarantee is 2 standard business days for delivery services within North America, provided by FEDEX and UPS. The cost of shipping will depend on your location, the carrier chosen, and the size and weight of the product purchased.

SAVE 40% + ON FUEL * SAVE 20% + ON CHEMICALS * IMPROVE COVERAGE BY 30% * Many PTO-driven farm implements don’t need full tractor power, so why waste fuel? By shifting to a higher tractor gear (gear up) and slowing engine speed (throttle down) to maintain your desired ground speed, you can save up to 40% on fuel, 30% on chemicals, and improve coverage by 30%.

GEARING UP AND THROTTLING DOWN Reduce PTO Speed (from 540rpm to 350rpm) Slow Fan Speed Reduce Blow Through Retain Ground Speed Retain Operating Pressure

SAVE FUEL HIT YOUR TARGETS HOW IT WORKS: REDUCING FUEL USAGE A Tractor in 40-80 hp range burns 3.7 gallons per hour at 540RPM. Average fuel use of 2.0 GPH at 350 RPM vs 3.7 GPH at 540 RPM.

= 46% FUEL SAVINGS*

THE FINANCIAL FUEL BENEFIT

Save between $20-$35 per acre per year*

40-80hp tractor +100 acres = $2,000 annual savings** 80+hp tractor + 100 acres = $3,400 annual savings**

80+hp tractor + 500 acres = $17,000 annual savings**

HOW IT WORKS: REDUCING CHEMICAL USAGE A Turbo-Mist™ Sprayer moving 2.5 mph in a 12 ft wide row = $900 of chemical per acre. A competitor Sprayer moving 2.5 mph in a 12 ft wide row = $1080 of chemical per acre.

= 20% CHEMICAL SAVINGS*, everytime you spray.

$1080 – $900 = $180 per/acre savings

THE FINANCIAL CHEMICAL BENEFIT

Save between $180-$325 per acre*

50 acres = $10,000 annual savings**

100 acres = $20,000 annual savings**

500 acres = $100,000 annual savings.**

* Subject to weather conditions (excessive wind, rain, heat) and other extenuating circumstances. ** Numbers shown are a median cost advantage as example only.

PRODUCT CATALOGUE + TECHNICAL SPECIFICATIONS

THE HEAVY DUTY SERIES SPECS. All HD models come standard with stainless steel tanks and turbines. Pair your HD model with our attachments to make the most of your investment.

Disclaimer: Slimline Manufacturing, manufacturer of the Turbo-Mist Agricultural Sprayer, has made every effort to accurately reflect the specifications of their product in these materials but cannot warrant the complete accuracy thereof subject to errors or omissions. The information contained in this promotional material is for illustration purposes only and is subject to change. Statements, figures, calculations, plans, images, and representations are indicative only. Images may include sketches, artist impressions and computer-generated images. Changes may be made to the included, but not limited to components: dimensions, fittings, finishes, ongoing costs, and specifications and representations are subject to change without notice. All marketing materials are also subject to copyright. No part of this collateral should be reproduced, adapted, or communicated without the written consent of the copyright owner.

Model: S30P500NTS

THE STANDARD DUTY SERIES SPECS. All SD models come standard with stainless steel tanks and turbines.

THE LIGHT DUTY SERIES SPECS. All LD models come standard with stainless steel tanks and carbon steel turbines.

3-Point Hitch Airblast sprayer

Herbicide Sprayer

Pull-type weed sprayer

IN THE SPOTLIGHT.

Presenting the 300 Gallon Oval Turbo-Mist ™ Spray Tank with Turbo-steer hitch. Model S19P300NTSLO. • • • • • • • • • • • • • •

5” X 2” tube frame w/crank jack & adj axles – fully powder coated Tank saddle system built into frame 304 type stainless steel tank Mechanical belt drive agitation- 1” SS agitation shaft with ss paddles Patented axial flow 19” turbine; requires 25 PTO HP 35 series Weasler US built drivelines with clutch 2 speed Berma gear box with neutral with dipstick (M47) Udor Zeta 170 piston diaphragm pump 2” axles with 6 bolt hubs, tires to match tank size 4” (10cm) Pressure Gauge 19” Turbine Outlet V19F check valves on each nozzle Controls: Teejet SS ball valves without Pressure Adjust at the tractor seat Turbo-Steer Hitch – allows 90 degree turns with PTO engaged – no binding!

Grape Tower with Undervine Blower

SPECIALTY PRODUCTS OPTIMUM PERFORMANCE

UTILITY SPRAYERS Our Utility Sprayers are geared towards the home hobbyist, smaller or commercial acreages that don’t require the tank capacity or specifications offered by our Light Duty, Standard, or Heavy Duty Turbo-Mist™ Sprayers. Our Sprayers can be used to spray weeds and are compatible with the use of herbicides. All utility sprayers are PTO or hydraulic driven. Our Utility Sprayers come in three different model types: 3-Point Hitch (3PT) Trailer Hitch (TR) Skid (SK)

Our Sprayers are highly customizable to suit the unique needs of your land, with a variety of spray booms, and tanks from 25 US gallons to 1200 US gallons*. We offer customization of the following additional components: Pumps (PTO or hydraulic) Tires Axles Booms (2 ft & up with/without breakaways) Curtains (Drift prevention)

*Available in 50 Gallon Increments.

200 Gallon 3 pt Utility sprayer equipped with a 20’ field boom.

400 Gallon Trailer Hitch Utility Sprayer equipped with high clearance axles, shade cloth guides and field boom.

NURSE TANKS We offer stainless steel Nurse Tanks ranging from 600-1,200 US Gallons. Our Nurse Tanks are available in both Skid and Trailer models.

Trailer Model Nurse Tank

MULTI-ROW SPRAYER The Multi-Row Airblast Sprayer allows configurations to spray two or three rows simultaneously. This sprayer utilizes an axial flow Sardi fan to produce large volumes of low velocity air to give the best coverage with low power inputs. This Sprayer provides superior coverage, resulting in optimization of operations and time savings. The design of the Sprayer allows you to operate in close proximity to the target, reducing spray drift. Enjoy fuel savings from reduced horsepower requirements and labour savings from optimized coverage. Simply put, the Multi-Row Sprayer is a cost saving machine.

Multi-Row sprayer similar as pictured.

BLOWER FAN BASE Our PTO powered Blower Fans offer the ability to remove moisture and prevent splitting without damaging fruit. Available in two models with three different heads to suit different fruit drying applications, the Blowers use the same fan and gearbox as our Heavy Duty (HD) Turbo-Mist™ series, generating significant air volume while requiring minimal horsepower. All units offer the ability to target the airflow into specific areas to maximize their effect. Available in wheeled or 3-point hitch models.

STANDARD (SD) BLOWER BASE- 30” (S30PM55)

This model combines a 30” Blower Fan base with an adjustable Standard Head. This unit offers diverse product customization, as it is compatible with other Attachments in the Turbomist Product Catalogue.

HEAVY DUTY BASE (HD) BLOWER BASE- 38” (S38PM55)

Our largest and most powerful Blower Fan, the 38-inch turbine generates 57% more air volume than the standard model. Built specifically for the needs of the larger fruit grower, this model is not compatible with additional attachments or customization. Note: this model requires a minimum of 80 PTO horsepower.

LEAF + BERM BLOWER ATTACHMENT Our Ground Level Blowers are built to blow grape berms and leaves from the base of trees. They are used to clear debris in the weed spray area to ensure you maximize your spray coverage. This unit allows you to multi-task by blowing both sides of the drive row at the same time. They fit conveniently onto the Blower Fan Base.

Our 38" Cherry Blower

BLOWER HEADS Our Blower Heads attach to the SD and HD Bases to provide crop-specific coverage that suits the unique needs of different growers. All SD Fan Bases come equipped with a Standard Head.

STANDARD HEAD

The Standard air delivery head is included with the purchase of all Blower Fan Bases. It provides air over a 180-degree target area from left to the right side of the drive row. Available in both 30” and 38” diameter.

CHERRY HEAD

The Cherry Head air delivery system is designed specifically to direct air to match the fruit growing area. Available in both 30” and 38” diameter.

GRAPE HEAD

The Grape Head air delivery system is designed to target the specific fruit growing zone in vineyards. Available in both 30” and 38” diameter.

THE RIGHT PARTS, RIGHT ON TIME. 32

WE HAVE YOU COVERED. The Parts Department at Slimline Manufacturing maintains a comprehensive inventory of high quality genuine OEM parts. Our knowledgeable staff is here to answer your parts inquiries, provide technical support, and process your parts orders in a timely manner. Contact us today, we are here to help keep you and your customers running smoothly. Hours of operation

7:00 am – 4:30 pm PST

Mon – Fri

Placing Orders with Slimline Parts Order desk How to place an order Orders can be placed by telephone, email or by fax. Phone: Fax: Email:

800-495-6145 Ext 205 or 203 250-487-2116 parts@slimlinemfg.com

1-250-493-6145 parts@slimlinemfg.com

559 Okanagan Ave E Penticton, BC V2A 3K4

www.slimlinemfg.com

SERVICE TIPS / MAINTENANCE

Test and verify power supplies and electrical system • Check tractor lead and all wiring for continuity

Check belt and or Chain tension • Instruction in warranty book and owner’s manual on how to check for wear and set up.

Inspect wire harness and wires for wear: • Check wiring harness for continuity • Look for wear points

Clean or replace liquid filters

Test, clean and overhaul spray pressure regulator: • Disassemble and clean regulator spring and slide area • If Diaphragm is convex, replace • Clean all surfaces and check for any burrs • Grease all slide areas Pressure Gauge: • Make sure that the pressure gauge reads zero! - Replace if necessary Pump diaphragms (Manufacturers recommend replacement every 500 hours) Install a new set of pump diaphragms: • Install new diaphragms and retainer bolts - Reinstall diaphragms and retainer bolts using blue Loctite - Do not use air tools on re-assembly of internal pump components - Inspect valve seats and springs for wear Change pump oil • Change Oil every 500 hours • Use Udor 30 weight non detergent oil, “REMEMBER” continually rotate pump while filling to remove air bubbles from crank case Change gearbox oil • Change gear box oil every 500 hours

Inspect and grease driveline • Inspect clutches for wear and broach clutches as per manufacturer recommendations • Check for wear in U joints Test controllers and electric valves • Check electric valve function with hoses disconnected from valves; this will prove that the valves are sealing and not leaking; • Then attach hose and repeat the same test; - If booms fail to shut down in a reasonable amount of time - Check hoses for bellowing - Check valve connection for missing O rings Replace worn or broken parts Fan Gear Box • Check to ensure that the gearbox shifts easily into high and low range - This is a stiff shift that may require the rotation of the fan manual to engage the gears; • If shifter is stuck or extremely stiff; - Remove shift gearbox cover and perform shifter maintenance procedure Fan

• Place fan gearbox into neutral - Rotate fan manually, listen to the fan bearing for potential failure

INSPECT FOR POTENTIAL FAILURES PTO steading bearing: • Check that bearings are greased • Check to make sure that seals are in place on bearings Sight Glass: • Check that sight glass is clear enough to visually see float ball Suction Filter O Ring: • Make sure that the suction filter O ring is not swollen or distorted • If it must be replaced, coat with EP2 grease and install Suction Intake Hose: • Check both ends of suction hose, ensure all required O Rings are in place • When reinstalling, grease O rings in these areas before reinstalling Tank Lid: • Ensure that tank lid has a seal Tank Suction Line: • Inspect to ensure that the suction line is firmly held in place! Packing Gland • Check that the packing gland has maximum adjust potential! Agitator Bearing: • Check for free rotation of bearing and pivot point (grease if necessary) Axles: • Check axles for movement - Simply push against the tire and check for movement - Jack-up sprayer and check that the axles’ grease is satisfactory Outlets • Check outlets to ensure that they move easily - This may require the outlets to be removed and surfaces cleaned and greased to allow outlet to move easily. Nozzle Wear • Using the Tee Jet catalogue and a drill index: - Check each nozzle for wear! PTO Covers and Guards • Make sure that PTO safety shields slide freely and all safety guards are in place Run sprayer at factory specs: • Test unit at 540 tractor RPM • Test both the high range and low range

Winterize sprayer for the off-season with anti-freeze.

1-250-493-6145 parts@slimlinemfg.com

559 Okanagan Ave E Penticton, BC V2A 3K4

www.slimlinemfg.com

Turbo-Mist™ Agricultural Sprayers are manufactured by Slimline Manufacturing Ltd. Our mission is to provide high quality engineered products to customers seeking innovative and solution-based wind and water machinery for a wide range of operating conditions.

Engineered for the Future 1-800-495-6145