Turbo-Mist Standard Duty Series

Suitable for the following crops: Peaches Plums / Prunes Other Stone Fruits Pears

 Apples

   

 Cherries

 Blueberries

 Grapes

 Hops

DURABLE | Strongest design in the market.

AFFORDABLE | High quality - lowest operating cost.

FUEL EFFICIENT | Save with our Gear Up - Throttle Down™ technology.

The Turbo-MistTM Standard Duty Series.

Save on fuel and reduce chemical waste while improving yield.

Engineered for the Future

The Turbo-MistTM Standard Duty Series is offered with the following standard configurations Our Standard Series offers a more compact sprayer built with the same quality, reliability and features of our market-leading Heavy Duty series, with smaller turbine and tank sizes.

• • • • • • • • • • • • • • • • • • • •

25 PTO to 55 PTO tractor HP to run 19" turbine 7240 CFM and speeds up to 105 mph 24" turbine 13500 CFM and speeds up to 130 mph 30" turbine 22600 CFM and speeds up to 150 mph Tank sizes 200-500 gallon Large 4'' Pressure gauge ZETA 170 Diaphragm pump - allows for "Gear Up Throttle Down" technology Front-mounted hi-drive pumps Electric or Hydraulic controls 5' x 2' Frame, sandblasted and powder coated Tire sizes from 7.60 x 15 on 2'' axles to 12.5 x 15 on 2'' axles depending on tank size 35 Series driveline with Clevis Hitch and Overrunning Clutch 2 Speed gearbox with neutral with dipstick 1’’ SS Mechanical agitation shaft 19" Adjustable Orchard Head, 10 nozzles per side 24" Adjustable Orchard Head, 13 nozzles per side 30'' Adjustable Orchard Head, 13 nozzles per side V19 Boom valves (Brass - Imperial thread) TXVK/Ceramic nozzles – These can be changed as per customer request The S30P400NNTSL and S24P300NTS are Turbo-steer units

Customize your dream sprayer with the following options: • • • • • • • • • • • • •

Pressure adjust from cab - adjust pressure on the go Aluminum steps - For ease of access and safety Handles - For ease of access and safety Braglia Anti-Drip Valves Remote Grease: Agitation - For your convenience Remote Grease: Fan Bearing - For your convenience Final Filters - Easy flush system, fantastic when mixing powders Additional Agitation Belt - Big time saver when on the go 8” Sump Drain extension - Allows for easy drainage Split Boom Rate controllers Boom Lights Upgrade to Low Drift Tower or other attachments There are towers and attachments available for this series.

Please visit www.turbomist.com for more information

WHY UPGRADE TO A TURBO-STEER™?

A key to complete canopy coverage with minimized water usage is the ability to maneuver your sprayer quickly and efficiently, allowing you to drive further out of the row without having to turn the booms off. This gives you better coverage on the last trees in your rows. No stopping required.

The Turbo-steer provides you with a 90-degree turning radius with the PTO fully engaged. That means getting into and out of tighter spots; it means tight row configurations are no problem; it means you can achieve continuous spraying without repeated stops and starts. Productivity and pace are half the challenge in cost-effective spray practices, and the larger the orchard, the more important that becomes.

SAVE FUEL HIT YOUR TARGETS

SAVE 40% + ON FUEL * SAVE 20% + ON CHEMICALS * IMPROVE COVERAGE BY 30%* This concept is ultra-simple, it will cost you pennies but save you thousands!

3 STEP PLAN TO PAY FOR YOUR NEW SPRAYER 1 Put 30 inch sections of surveyors tape up in the tops of your trees and vines (hardest spots to

spray) and leave it there all year, put some in at least every other row to allow the operator to make sure they are reaching the target. This is what costs the pennies, literally.

2 Pick a higher gear on your tractor that allows you to travel the same speed but at a PTO speed of around 350 rpm, instead of 540. This will result in your engine rpm dropping significantly, depending upon the make/model. By traveling the same speed your calibration will remain exactly the same. You will need to do a sprayer speed test to confirm your ground speed, this is important.

3 As long as the surveyor tape is moving as you pass, you are getting coverage. That is it, that is all you need to know to save 25% to 40% of your spray fuel bill next season using a TurboMist diaphragm pump equipped model.

Reduce PTO Speed (from 540rpm to 350rpm) Slow Fan Speed Reduce Blow Through Retain Ground Speed Retain Operating Pressure

HOW IT WORKS: REDUCING CHEMICAL USAGE

HOW IT WORKS: REDUCING FUEL USAGE A tractor in 40-80 hp range burns 3.7 gallons per hour at 540RPM. Average fuel use of 2.0 GPH at 350 RPM vs 3.7 GPH at 540 RPM.

= 46% FUEL SAVINGS* THE FINANCIAL FUEL BENEFIT

Save between $20-$35 per acre per year*

A Turbo-Mist™ Sprayer moving 2.5 mph in a $900 of chemical per acre. A competitor Sprayer moving 2.5 mph in a 12 ft wide row = $1080 of chemical per acre.

= 20% CHEMICAL SAVINGS*, everytime you spray. $1080 – $900 = $180 per/acre savings

40-80hp tractor + 100 acres = $2,000 annual savings** 80+hp tractor + 100 acres = $3,400 annual savings** 80+hp tractor + 500 acres = $17,000 annual savings**

* Subject to weather conditions (excessive wind, rain, heat) and other extenuating circumstances. ** Numbers shown are a median cost advantage as example only.

THE FINANCIAL CHEMICAL BENEFIT Save between $180-$325 per acre* 50 acres = $10,000 annual savings** 100 acres = $20,000 annual savings** 500 acres = $100,000 annual savings**

80+hp tractor + 100 acres = $3,400 annual savings**

100 acres = $20,000 annual savings**

80+hp tractor + 500 acres = $17,000 annual savings**

500 acres = $100,000 annual savings.**

* Subject to weather conditions (excessive wind, rain, heat) and other extenuating c cumstances. ** Numbers shown are a median cost advantage as example only. * Subject to weather conditions (excessive wind, rain, heat) and other extenuating ci cumstances. ** Numbers shown are a median cost advantage as example only.

The Turbo-MistTM Standard Duty Series Specs.

Tank Size Turbine size 200 19 200 24 200 30 300 19 300 24 300 24 300 24 300 30 300 30 300 30 400 24 400 30 400 30 500 30 200 300 300 300 300 400

19 19 24 24 30 30

Model # Hitch Pump PTO required S19P200NSHD Clevis Diaphragm 25 S24P200NSHD Clevis Diaphragm 35 S30P200NSHD Clevis Diaphragm 55 S19P300NSHDO Clevis Diaphragm 25 S24P300SHD Clevis Diaphragm 35 S24P300NSHD Clevis Diaphragm 35 S24P300NSHDO Clevis Diaphragm 35 S30P300S Clevis Diaphragm 55 S30P300SHD Clevis Diaphragm 55 S30P300NSHD Clevis Diaphragm 55 S24P400NSHD Clevis Diaphragm 35 S30P400NSHD Clevis Diaphragm 55 S30P400NNSL Clevis Diaphragm 55 S30P500NSHD Clevis Diaphragm 55 Standard Series Turbo-Steer Models S19P200NTSL Turbosteer Diaphragm 25 S19P300NTSLO Turbosteer Diaphragm 25 S24P300NTS Turbosteer Diaphragm 35 S24P300NTSO Turbosteer Diaphragm 35 S30P300NTSL Turbosteer Diaphragm 55 S30P400NNTSL Turbosteer Diaphragm 55

WxHxL 51x45x140 51x45x140 51x45x145 61x45x140 61x53x140 51x45x166 51x61x140 61x53x145 61x53x145 51x45x166 65x53x166 65x52x166 55x53x182 61x60x182 51x45x155 51x60x158 51x45x182 52.5x61x166 61x44x182 55x53x182

Disclaimer: Slimline Manufacturing, manufacturer of the Turbo-Mist Agricultural Sprayer, has made every effort to accurately reflect the specifications of their product in these materials but cannot warrant the complete accuracy thereof subject to errors or omissions. The information contained in this promotional material is for illustration purposes only and is subject to change. Statements, figures, calculations, plans, images, and representations are indicative only. Images may include sketches, artist impressions and computer-generated images. Changes may be made to the included, but not limited to components: dimensions, fittings, finishes, ongoing costs, and specifications and representations are subject to change without notice. All marketing materials are also subject to copyright. No part of this collateral should be reproduced, adapted, or communicated without the written consent of the copyright owner.

Contact your local Turbo-Mist™ dealer today!

Designed, Engineered and Manufactured by:

Phone: 1-800-495-6145 Email: agsales@slimlinemfg.com 559 Okanagan Ave E, Penticton, BC V2A 3K4 Canada

www.slimlinemfg.com / www.turbomist.com

Engineered for the Future