Turbo-Mist Heavy Duty Series

Suitable for the following crops:

 Grapes

 Apples

 Cherries

   

 Hops

Peaches Plums / Prunes Stone Fruits Pears

 Citrus

 Nuts

DURABLE | Strongest design in the market.

AFFORDABLE | High quality - lowest operating cost.

FUEL EFFICIENT | Save with our Gear Up - Throttle Down™ technology.

The Turbo-MistTM Heavy Duty Series.

Save on fuel and reduce chemical waste while improving yield.

Engineered for the Future

The Turbo-MistTM Heavy Duty Series is offered with the following standard configurations Specifically designed for large growing applications, these units are structurally built for the additional weight of our attachments to increase productivity. This sprayer is designed to manage the same and larger acreage as our Standard Duty Series, with less wear and tear on equipment due to the larger tank sizes and increased spray capacity.

• • • • • • • • • • • • • • • •

60 PTO to 90 PTO tractor HP to run 30" turbine 22600 CFM and speeds up to 150 mph 38" turbine 40000 CFM and speeds up to 135 mph Tank sizes 400-1000 gallon Large 4'' Pressure gauge ZETA 170 Diaphragm pump or Myers Centrifugal pump Electric or Hydraulic controls 8' x 2' Frame, sandblasted and powder coated Tire sizes from 9.5 x 15 on 2” axles to 21.5 x 16.1 on 2.75" axles depending on tank size 55 Series driveline with Clevis Hitch and Overrunning Clutch 2 Speed gearbox with neutral with dipstick Mechanical belt drive agitation - 1’’ SS agitation shaft 30" Adjustable Orchard Head, 13 nozzles per side 38" Adjustable Orchard Head, 15 nozzles per side V19 Boom valves (Brass - Imperial thread TXVK/Ceramic nozzles – These can be changed as per customer request

Customize your dream sprayer with the following options: • • • • • • • • • • • • • • •

Pressure adjust from cab - adjust pressure on the go Aluminum steps - For ease of access and safety Handles - For ease of access and safety Braglia Anti-Drip Valves Upgrade to Chain Drive - Positive drive, no belt slippage Remote Grease: Agitation - For your convenience Remote Grease: Fan Bearing - For your convenience Final Filters - Easy flush system, fantastic when mixing powders Additional Agitation Belt - Big time saver when on the go 8” Sump Drain extension - Allows for easy drainage Split Boom Rate controllers Boom Lights 3" Nurse Filler Upgrade to a Low Drift Tower or other attachments

There are towers and attachments available for this series.

Please visit www.turbomist.com for more information

WHY UPGRADE TO A TURBO-STEER™?

A key to complete canopy coverage with minimized water usage is the ability to maneuver your sprayer quickly and efficiently, allowing you to drive further out of the row without having to turn the booms off. This gives you better coverage on the last trees in your rows. No stopping required. The Turbosteer provides you with a 90-degree turning radius with the PTO fully engaged. That means getting into and out of tighter spots; it means tight row configurations are no problem; it means you can achieve continuous spraying without repeated stops and starts. Productivity and pace are half the challenge in cost-effective spray practices, and the larger the orchard, the more important that becomes.

One year limited warranty on Airblast sprayers!

SAVE FUEL HIT YOUR TARGETS

SAVE 40% + ON FUEL * SAVE 20% + ON CHEMICALS * IMPROVE COVERAGE BY 30%* This concept is ultra-simple, it will cost you pennies but save you thousands!

3 STEP PLAN TO PAY FOR YOUR NEW SPRAYER 1 Put 30 inch sections of surveyors tape up in the tops of your trees and vines (hardest spots to

spray) and leave it there all year, put some in at least every other row to allow the operator to make sure they are reaching the target. This is what costs the pennies, literally.

2 Pick a higher gear on your tractor that allows you to travel the same speed but at a PTO speed of around 350 rpm, instead of 540. This will result in your engine rpm dropping significantly, depending upon the make/model. By traveling the same speed your calibration will remain exactly the same. You will need to do a sprayer speed test to confirm your ground speed, this is important.

3 As long as the surveyor tape is moving as you pass, you are getting coverage. That is it, that is all you need to know to save 25% to 40% of your spray fuel bill next season using a TurboMist diaphragm pump equipped model.

Reduce PTO Speed (from 540rpm to 350rpm) Slow Fan Speed Reduce Blow Through Retain Ground Speed Retain Operating Pressure

HOW IT WORKS: REDUCING CHEMICAL USAGE

HOW IT WORKS: REDUCING FUEL USAGE A tractor in 40-80 hp range burns 3.7 gallons per hour at 540RPM. Average fuel use of 2.0 GPH at 350 RPM vs 3.7 GPH at 540 RPM.

= 46% FUEL SAVINGS* THE FINANCIAL FUEL BENEFIT

Save between $20-$35 per acre per year*

A Turbo-Mist™ Sprayer moving 2.5 mph in a $900 of chemical per acre. A competitor Sprayer moving 2.5 mph in a 12 ft wide row = $1080 of chemical per acre.

= 20% CHEMICAL SAVINGS*, everytime you spray. $1080 – $900 = $180 per/acre savings

40-80hp tractor + 100 acres = $2,000 annual savings** 80+hp tractor + 100 acres = $3,400 annual savings** 80+hp tractor + 500 acres = $17,000 annual savings**

* Subject to weather conditions (excessive wind, rain, heat) and other extenuating circumstances. ** Numbers shown are a median cost advantage as example only.

THE FINANCIAL CHEMICAL BENEFIT Save between $180-$325 per acre* 50 acres = $10,000 annual savings** 100 acres = $20,000 annual savings** 500 acres = $100,000 annual savings**

80+hp tractor + 100 acres = $3,400 annual savings**

100 acres = $20,000 annual savings**

80+hp tractor + 500 acres = $17,000 annual savings**

500 acres = $100,000 annual savings.**

* Subject to weather conditions (excessive wind, rain, heat) and other extenuating c cumstances. ** Numbers shown are a median cost advantage as example only. * Subject to weather conditions (excessive wind, rain, heat) and other extenuating ci cumstances. ** Numbers shown are a median cost advantage as example only.

The Turbo-MistTM Heavy Duty Series Specs.

Tank Size US gal Turbine size 400 30 400 30 500 30 500 30 500 30 500 30 500 38 500 38 600 30 600 30 600 30 600 30 600 38 600 38 1000 38 400 400 500 500 500 500 500 600 600 600 600 1000 1000

30 30 30 30 30 38 38 30 30 30 38 30 38

Model # Hitch Pump S30P400NS Clevis Diaphragm S30P400NSC Clevis Centrifugal S30P500S Clevis Diaphragm S30P500NS Clevis Diaphragm S30P500SC Clevis Centrifugal S30P500NSC Clevis Centrifugal S38P500S Clevis Diaphragm S38P500SC Clevis Centrifugal S30P600S Clevis Diaphragm S30P600NS Clevis Diaphragm S30P600SC Clevis Centrifugal S30P600NSC Clevis Centrifugal S38P600S Clevis Diaphragm S38P600SC Clevis Centrifugal S38P1000SC Clevis Centrifugal Heavy Duty Series Turbo-Steer Models S30P400NTS Turbosteer Diaphragm S30P400NTSC Turbosteer Centrifugal S30P500NTS Turbosteer Diaphragm S30P500TS Turbosteer Diaphragm S30P500NTSC Turbosteer Centrifugal S38P500TS Turbosteer Diaphragm S38P500TSC Turbosteer Centrifugal S30P600NTS Turbosteer Diaphragm S30P600TS Turbosteer Diaphragm S30P600NTSC Turbosteer Centrifugal S38P600TS Turbosteer Diaphragm S30P1000TSC Turbosteer Centrifugal S38P1000TSC Turbosteer Centrifugal

PTO required 60 65 60 60 65 65 85 90 60 60 65 65 85 90 90

WxHxL 65x52x188 65x52x166 76x57x175 65x60x188 76x57x166 65x57x166 76x57x175 76x57x166 84x62x175 65x65x188 84x62x166 65x65x166 84x62x175 84x62x166 95x75x195

60 65 60 60 65 85 90 60 60 65 85 90 90

65x52x185 65x52x182 65x60x185 76x57x182 65x57x182 76x57x182 76x57x182 65x65x185 84x62x182 65x65x182 84x62x182 95x75x200 95x75x200

Disclaimer: Slimline Manufacturing, manufacturer of the Turbo-Mist Agricultural Sprayer, has made every effort to accurately reflect the specifications of their product in these materials but cannot warrant the complete accuracy thereof subject to errors or omissions. The information contained in this promotional material is for illustration purposes only and is subject to change. Statements, figures, calculations, plans, images, and representations are indicative only. Images may include sketches, artist impressions and computer-generated images. Changes may be made to the included, but not limited to components: dimensions, fittings, finishes, ongoing costs, and specifications and representations are subject to change without notice. All marketing materials are also subject to copyright. No part of this collateral should be reproduced, adapted, or communicated without the written consent of the copyright owner.

Contact your local Turbo-Mist™ dealer today!

Designed, Engineered and Manufactured by:

Phone: 1-800-495-6145 Email: agsales@slimlinemfg.com 559 Okanagan Ave E, Penticton, BC V2A 3K4 Canada

www.slimlinemfg.com / www.turbomist.com

Engineered for the Future