ZIRCONIA
YOUR ONE STOP SHOP
MILLING DISCS
MILLED UNITS
SHADING LIQUIDS
ArgenZ Anterior
Super Translucent
• Single to three unit anterior bridges
• Single unit posterior crowns
ArgenZ HT+
High Translucency Plus Single units up to full arch frames
• Frames or full contour
ArgenZ HT+ Multilayer
High Translucency Plus strength and Multilayer
• Single frames up to full arches
• Frames and full contour
ArgenZ ST Multilayer
Super Translucency
• 3 unit bridges including pre-molars
• Use anywhere in the mouth
ArgenZ Ultra
High Strength
• Single units up to full arch frames
HIGH TRANSLUCENT MULTILAYER ZIRCONIA
ArgenZ™ HT+ Multilayer Zirconia discs offer unmatched strength and shade accuracy that mirrors the natural gradient of dentin and enamel without layer lines.
• 45% translucency
• Flexural Strength (1250 MPa)
• Single units to full arch
• 16 VITA Classical, 3 Bleach, and 5 Light Shades
ARGENZ HT+ MULTILAYER 98mm PRESHADED
Size 98x 12 98x 14 98x 16 98x 18 98x 20 98x 25 98x 30
ShadeA1 SAZ619 SAZ638 SAZ657 SAZ676 SAZ695 SAZ800 SAZ819
ShadeA2 SAZ620 SAZ639 SAZ658 SAZ677 SAZ696 SAZ801 SAZ820
ShadeA3 SAZ621 SAZ640 SAZ659 SAZ678 SAZ697 SAZ802 SAZ821
ShadeA3.5 SAZ622 SAZ641 SAZ660 SAZ679 SAZ698 SAZ803 SAZ822
ShadeA4 SAZ623 SAZ642 SAZ661 SAZ680 SAZ699 SAZ804 SAZ823
ShadeB1 SAZ624 SAZ643 SAZ662 SAZ681 SAZ700 SAZ805 SAZ824
ShadeB2 SAZ625 SAZ644 SAZ663 SAZ682 SAZ701 SAZ806 SAZ825
ShadeB3 SAZ626 SAZ645 SAZ664 SAZ683 SAZ702 SAZ807 SAZ826
ShadeB4 SAZ627 SAZ646 SAZ665 SAZ684 SAZ703 SAZ808 SAZ827
ShadeC1 SAZ628 SAZ647 SAZ666 SAZ685 SAZ704 SAZ809 SAZ828
ShadeC2 SAZ629 SAZ648 SAZ667 SAZ686 SAZ705 SAZ810 SAZ829
ShadeC3 SAZ630 SAZ649 SAZ668 SAZ687 SAZ706 SAZ811 SAZ830
ShadeC4 SAZ631 SAZ650 SAZ669 SAZ688 SAZ707 SAZ812 SAZ831
ShadeD2 SAZ632 SAZ651 SAZ670 SAZ689 SAZ708 SAZ813 SAZ832
ShadeD3 SAZ633 SAZ652 SAZ671 SAZ690 SAZ709 SAZ814 SAZ833
ShadeD4 SAZ634 SAZ653 SAZ672 SAZ691 SAZ710 SAZ815 SAZ834
ShadeOM1 SAZ635 SAZ654 SAZ673 SAZ692 SAZ711 SAZ816 SAZ835
ShadeOM2 SAZ636 SAZ655 SAZ674 SAZ693 SAZ712 SAZ817 SAZ836
ShadeOM3 SAZ637 SAZ656 SAZ675 SAZ694 SAZ713 SAZ818 SAZ837
Purge-All Plus
Purge-All Plus absorbs and eliminates all types of furnace contaminants. It eliminates porcelain discolouration, extends muffle and thermocouple life, and maintains thermocouple accuracy, whilst Purge-All Zr removes contamination build up from colouring agents used in shading zirconia crowns or bridges.
Whip Mix Sintering Beads
Sintering beads for effective Zr sintering.
• 45% translucency
• Flexural Strength (1250 MPa)
• Bridges up to 14 units
ARGENZ HT+ 98mm PRESHADED
• Sinter HT+ and Anterior together (1500°C)
Shade
Shade
Shade
Shade
Shade
IMPROVED HIGH TRANSLUCENT ZIRCONIA
ArgenZ HT+ provides the assurance of higher strength and better aesthetics, resulting in fewer fractures while mimicking the aesthetics of natural dentine.
ShadeB4 SAZ335 SAZ351 SAZ319 SAZ372 SAZ389 SAZ432 SAZ408 SAZ910
ShadeC1 SAZ336 SAZ352 SAZ320 SAZ373 SAZ390 SAZ433 SAZ409 SAZ911
ShadeC2 SAZ337 SAZ353 SAZ321 SAZ374 SAZ391 SAZ434 SAZ410 SAZ912
ShadeC3 SAZ894 SAZ896 SAZ322 SAZ900 SAZ392 SAZ435 SAZ411 SAZ913
ShadeC4 SAZ895 SAZ897 SAZ899 SAZ901 SAZ393 SAZ436 SAZ412 SAZ914
ShadeD2 SAZ338 SAZ354 SAZ362 SAZ375 SAZ394 SAZ437 SAZ413 SAZ915
ShadeD3 SAZ339 SAZ355 SAZ363 SAZ376 SAZ395 SAZ438 SAZ414 SAZ916
ShadeD4 SAZ340 SAZ356 SAZ324 SAZ377 SAZ396 SAZ439 SAZ415 SAZ917
ShadeOM1 SAZ341 SAZ357 SAZ327 SAZ378 SAZ397 SAZ440 SAZ416 SAZ918
ShadeOM2 SAZ342 SAZ358 SAZ364 SAZ379 SAZ398 SAZ441 SAZ417 SAZ919
ARGENZ HT+ WITH UNSHADED WHITE 95
ShadeOM3 SAZ343 SAZ359 SAZ323 SAZ380 SAZ399 SAZ442 SAZ418 SAZ453 Price
ArgenZ HT+ zirconia offers 4%-5% more translucency and increased strength over other HT zirconia. It can be used for single
ArgenZ HT+ zirconia offers 4%-5% more translucency and increased strength over other HT zirconia. It can be used for single units to full roundhouse for frames or full contour.
SIZES
THICKNESSES STRENGTH TRANSLUCENCY
Shaded Release April 2018
SHADES
ArgenZ™ Anterior Super Translucent Zirconia is an exciting alternative to lithium disilicate offering the highest translucency with optimum strength most closely mimicking the natural dentin of the tooth. ArgenZ Anterior Zirconia material is manufactured in the USA, isostatically pressed and CE compliant.
• Available in 16 VITA shades, White and Bleach
• 50% translucency • 750MPa flexural strength
• Available for single posterior/anterior units and up to 3 unit anterior bridges
ARGENZ ANTERIOR 98mm WITH UNSHADED WHITE
ARGENZ ANTERIOR VALUE SHADES 1-6
Select the value disc indicated to achieve the desired shade. SAZ033
Five Sizes: 12, 14, 16, 18 and 22mm for optimum
Most accurate match to 16 VITA Classical Shades
Quality produced and competitively priced
ArgenZ ST Multilayer Zirconia is suitable for anywhere in the mouth, up to three unit bridges including pre-molars. The material is available in
ArgenZ ST Multilayer Zirconia is suitable for anywhere in the mouth, up to three unit bridges including pre-molars. The material is available in five sizes, 16 VITA Shades, and 3 Bleach shades.
ARGENZ ST MULTILAYER
SAZ504 SAZ523 SAZ542 SAZ561
ShadeA4 SAZ486 SAZ505 SAZ524 SAZ543 SAZ562
ShadeB1 SAZ487 SAZ506 SAZ525 SAZ544 SAZ563
ShadeB2 SAZ488 SAZ507 SAZ526
Shade
Shade
ShadeC1 SAZ491 SAZ510 SAZ529 SAZ548 SAZ567
ShadeC2 SAZ492 SAZ511 SAZ530 SAZ549 SAZ568
ShadeC3 SAZ493 SAZ512 SAZ531 SAZ550 SAZ569
ShadeC4 SAZ494 SAZ513 SAZ532 SAZ551 SAZ570
ShadeD2 SAZ495 SAZ514 SAZ533 SAZ552 SAZ571
ShadeD3 SAZ496 SAZ515 SAZ534 SAZ553 SAZ572
ShadeD4 SAZ497 SAZ516 SAZ535 SAZ554 SAZ573
ShadeOM1 SAZ498 SAZ517
ArgenZ™ Ultra Zirconia high strength and opaque properties make it a perfect solution over implants and for posterior restorations. ArgenZ Ultra material is manufactured in the USA, isostatically pressed and CE compliant.
• Available in 16 VITA shades, White and Bleach
• Available for up to 14 unit full arch bridges
• 1400MPa flexural strength
High quality, Nickel free non precious alloy, for all Crowns, bridges, inlays, onlays, and telescopes. Offering high corrosion resistance, excellent CTE for all ceramics and lower hardness for perfect milling.
SHADING LIQUIDS
Titanium-based milling discs for open systems 98.5mm. They are characterised by high biocompatibility.
Manufactured in accordance with ASTM F136.
Magnum Hyperone Ti
A comprehensive, ready to use system, compatible with all major Implant brands and platforms. In-house milling of customized abutments saves time and produces abutments with demonstrated clinical and aesthetic benefits.
Elos Accurate® Pre-Milled Blanks and Holder.
– All Blanks in titanium grade 5, a stainless-steel holder, a blanks library in 3Shape and exocad, compatibility with all major implant systems
KATANA ZR UTML (MULTI LAYER) ZIRCONIA
Ultra Translucent Multi-Layered. Ideal for anterior crowns and veneers, inlays/onlays and posterior single crowns, with a wellbalanced combination of chromatic and gradational translucency, which reproduces esthetic enamel and dentine effects.
Available in 2 types
16 Vita shades A1 to D4 (14 and 18mm only)
Enamel (E) shades, A1, A2, A3 and NW
Size 98.5 x 14mm
98.5 x 18mm
Shade A1 SNT2965 SNT2966
Shade A2 SNT2967 SNT2968
Shade A3 SNT2969 SNT2970
Shade A3.5 SNT2939 SNT2940
Shade A4 SNT2941 SNT2942
Shade B1 SNT2943 SNT2944
Shade B2 SNT2945 SNT2946
Shade B3 SNT2947 SNT2948
EXCELLENT AESTHETIC POTENTIAL FOR ZIRCONIA DENTAL RESTORATIONS
Shade B4 SNT2949 SNT2950
Shade C1 SNT2951 SNT2952
Shade C2 SNT2953 SNT2954
Shade C3 SNT2955 SNT2956
Shade C4 SNT2957 SNT2958
Shade D2 SNT2959 SNT2960
Shade D3 SNT2961 SNT2962
Shade D4 SNT2963 SNT2964
With an innovative concept of combining high translucency and strength, the best features of the well-known KATANA™ series have been combined in one disc, KATANA™ Zirconia YML. From highly esthetic anterior restorations that require high translucency, up to long-span bridges that require high strength, one single disc is all you need now.
Shade EA1 SNT2924 SNT2925
Shade EA2 SNT2927 SNT2928
KATANA YML MULTI-LAYERED
With an innovative concept of combining high translucency and strength, the best features of the well-known KATANA™ series have been combined in one disc, KATANA™ Zirconia YML. From highly esthetic anterior restorations that require high translucency, up to long-span bridges that require high strength, one single disc is all you need now.
x 22mm
Shade A1 SNT3165 SNT3166 SNT3167
Shade A2 SNT3168 SNT3169 SNT3170
Shade A3 SNT3171 SNT3172 SNT3173
Shade A3.5 SNT3174 SNT3175 SNT3176
Shade A4 SNT3177 SNT3178 SNT3179
Shade B1 SNT3180 SNT3181 SNT3182
Shade B2 SNT3183 SNT3184 SNT3185
Shade B3 SNT3186 SNT3187 SNT3188
Shade C1 SNT3189 SNT3190 SNT3191
Shade C2 SNT3192 SNT3193 SNT3194
Shade C3 SNT3195 SNT3196 SNT3197
Shade D2 SNT3198 SNT3199 SNT3200
Shade D3 SNT3201 SNT3202 SNT3203
Shade NW SNT3204 SNT3205 SNT3206
KATANA ZR HTML PLUS
Shade EA3 SNT2930 SNT2931
Shade ENW SNT2933 SNT2934
EXCELLENT AESTHETIC POTENTIAL FOR ZIRCONIA DENTAL RESTORATIONS
This technical guide explains key aspects helping to achieve the most aesthetic restorations with KATANA™ Zirconia YML.
KATANA ZR STML (MULTI LAYER) ZIRCONIA
Super Translucent Multi-Layered. Ideal for up to 3 units posterior bridges with a well-balanced combination of chromatic and gradational translucency, which reproduces esthetic enamel and dentine effects. Available in: A1, A2, A3, A3.5 and NW.
Shade A1 SNT2909 SNT2910 SNT2911
Shade A2 SNT2912 SNT2913 SNT2914
Shade A3 SNT2915 SNT2916 SNT2917
Shade A3.5 SNT2918 SNT2919 SNT2920
Shade A4 SNT3030 SNT3031 SNT3032
Shade B1 SNT3033 SNT3034 SNT3035
Shade B2 SNT3036 SNT3037 SNT3038
Shade C2 SNT3045 SNT3046 SNT3047
A new high strength, aesthetic zirconia ideal for fast sintering. With one strength through the block, the result is a reliable framework or monolithic bridge with a beautiful shape and colour fitting the patient’s natural dentition. 1150MPa, 45% Translucency.
Shade A1 SNT3226 SNT3227 SNT3228
Shade A2 SNT3229 SNT3230 SNT3231
Shade A3 SNT3232 SNT3233 SNT3234
Shade A3.5 SNT3235 SNT3236 SNT3237
Shade A4 SNT3238 SNT3239 SNT3240
Shade B1 SNT3241 SNT3242 SNT3243
Shade B2 SNT3244 SNT3245 SNT3246
Shade B3 SNT3247 SNT3248 SNT3249
Shade C1 SNT3250 SNT3251 SNT3252
Shade C2 SNT3253 SNT3254 SNT3255
Shade C3 SNT3256 SNT3257 SNT3258
Shade D2 SNT3259 SNT3260 SNT3261
Shade D3 SNT3262 SNT3263 SNT3264
Shade NW SNT3265 SNT3266 SNT3267 Price £119.25
GC
INITIAL ZIRCONIA COLORING LIQUID
The Initial Zirconia Coloring Liquid system consists of 12 water-based colouring liquids following the ‘IQ philosophy’. Apply the liquids onto the monolithic or anatomically reduced restoration after milling using the painting or dipping technique. The framework in the right colour tone can be finished.
IPS e.max ZirCAD PRIME
IPS e.max ZirCAD Prime redefines all-ceramics. The revolutionary material ensures exceptional quality and esthetics and can be used for all applications, from the single unit crown to multiple unit bridges – and can be processed with all types of techniques.
SIV6184 IPS e.max
COLADO CAD CoCr4
IPS e.max ZirCAD
IPS e.max ZirCAD is the versatile zirconium oxide system for CAD/CAM applications in the dental laboratory. It is used for the fabrication of copings and frameworks as well as fullcontour crowns and bridges.
IPS e.max ZirCAD MO SIV6135
IPS e.max ZirCAD LT
SIV6068
COLADO CAD Ti5
ProArt CAD Splint
Colado CAD CoCr4 are discs made from a cobalt-chromium alloy. They are suitable for a wide variety of restorations, such a full-contour crowns and bridges, frameworks, implant-supported suprastructures and much more. The fine-grain structure of the material ensures excellent machinability with an ideal CTE of 14.4± 0.5 * 10 -6 /K.
Colado CAD Ti5 are discs made from a titanium alloy. These discs are suitable for the manufacture of crowns, wide-spanned bridges and implant-supported supra-structures.
ProArt CAD Splint, the dimensionally stable polymer and wax discs are easy to mill. As CAD/ CAM auxiliary materials, they cover a wide range of indications.
ProArt CAD WAX
ProArt CAD wax discs establish the basis for accurate objects with excellent detail, for use in dental technology.
IVOTION DENTURE SYSTEM
The Ivotion Denture System comprises a complete digital manufacturing process which allows you to create top-quality removable dentures. The integrated workflow involves digital laboratory fabrication methods and established clinical treatment steps. The new monolithic Ivotion disc, which is at the core of this system, features both tooth and denture base materials.
BENEFITS
Fast manufacturing process
Premium materials
Predictable results
APPLICATIONS
WORKFLOW
Individual complete dentures (upper or lower jaw)
Complete dentures (upper and lower jaw)
Duplicate complete dentures (upper and lower jaw)
Immediate complete dentures (upper and lower jaw)
Overdentures on 2 attachments (upper and lower jaw)
IVOTION
The key to amazing efficiency with the new Ivotion discs is that they allow you to fabricate monolithic removable dentures by means of an efficient digital workflow. Complete dentures are machined from one disc in one uninterrupted milling process, which reduces the need for manual work. This is in accordance with the product slogan: One disc. One milling process. One denture.
Ivotion Pink V, Preference, A1, A2, A3 - 98.5 U/1 £91.95
Ivotion Pink V, Preference, A1, A2, A3 - 98.5 L/1 £91.95
IVOTION BASE
Ivotion Base are PMMA discs with high impact strength for CAD/ CAM finishing. Denture bases are produced from these discs using the milling manufacturing process for digital removable dentures. The 30-mm thick Ivotion Base discs are available in the four base colours Pink, Pink-V, Preference and 34-V.
Base Pink V, Preference, 34 V - 98.5-30mm/1 £54.05
The Ivotion Denture System seamlessly combines materials and processes from Ivoclar with scanning and software solutions from 3Shape. An exclusively developed design software together with coordinated and proven materials, including special manufacturing strategies and state-of-the art milling machines (PrograMill) promise exceptional reliability and consistent, predictable results.
IVOTION DENT
Ivotion Dent discs are made of tooth-coloured, monochromatic DCL material. The material is characterized by an optimally coordinated translucency and lifelike fluorescence. The highly esthetic appearance is achieved by three main factors: Low opacity in combination with the anatomical shape of the anterior teeth and a natural looking surface finish.
IVOTION DENT MULTI
Ivotion Dent Multi discs are made of multichromatic DCL material. The innovative pearl-structure-effect provides a harmonious gradation of colour, which gives the prosthetic teeth a highly esthetical appearance. The multi-chromatic discs are designed with three integrated layers resembling that of natural dentition: incisal – dentin – cervical.
Ivotion
Ivotion Dent A1, A2, A3, A3.5, B1, B3, C2, D2, BL3 - 98.5-20mm/1 £81.60
Ivotion Dent Multi A1, A2, A3, A3.5, B1, B3, C2, D2, BL3 - 98.5-20mm/1 £99.90
MYERSON CAD MILLING DISCS
DURACETAL CAD COSMETIC APPLIANCES
Ideally suited for a variety of removable appliances
• Bite splints and bite guards
• Temporary crowns & bridges
• Partial denture frameworks
• Smile enhancers
VISICLEAR CAD PARTIALS
Available in 5 VITA shades:
A1, A2, A3.5, B1 & G2 (bleach shade) and the new PINK 1 shade
• Discs are 98.5mm diameter with 10mm collar
• 3 thicknesses 15, 20 & 25mm
The clear choice for aesthetic flexible partials. Myerson VisiClear is an advanced thermoplastic for making semi-translucent flexible partial dentures. VisiClear is now available in a milling disc, which integrates seamlessly into a digital workflow. VisiClear delivers improved aesthetics, stainresistance, and ease of use compared to competing nylon flexible materials.
• Size: 98.5 mm
• Thicknesses: 15mm, 20mm and 25mm
• Mills fast and cleanly using standard PMMA tools
• Add clasps or make repairs quickly and easily with Myerson’s HotShotElite handheld injector
DURAFLEX CAD PARTIALS
DuraFlex is now available as a milling disc!
This state-of-the-art thermoplastic material which combines flexibility, translucency and durability, along with stain-resistance and ease of use is now available as a milling disc.
Available shades: Pink, Medium Pink, Tissue Tone Pink, Dark Pink
• Size: 98.5 mm
• Thicknesses: 15mm, 20mm and 25mm
• Mills fast and cleanly using standard PMMA tools
• Add clasps or make repairs quickly and easily with the Myerson HotShotElite handheld injector
MYERSON DENTIVERA™
INTRODUCING ULTAIRE™ AKP
Ultaire™ AKP is an innovative, high-performance polymer that reduces the need for uncomfortable, unappealing metal RPDs. Milled from Dentivera™ milling discs, RPDs made from Ultaire™ AKP diminish the all-too-common pain points of metal for labs, dentists and patients alike.
• Taste-free
• Lightweight
• Biocompatible
• Pleasing aesthetics
• Bone-like and tooth-supported
• May minimize bone loss
ARGEN WAX
Argen wax for high performance - Our synthetic, plastic-stabilized wax ArgenW is ideal for the production of crowns, bridges and other cast objects:
• CE marked
• Particularly stable - for the smooth handling of a restoration
• Residue-free, therefore ideally suited for casting and pressing
ARGEN PMMA
ArgenPMMA offers the highest quality, life-like temporary material in a wide selection of monochromatic and multishaded discs.
Size 95 x 20mm 98 x 14mm 98 x 20mm
Shade Clear SAP001 SAP005 SAP006
Price £48.02 £28.15 £34.29
Size 98 x 14mm 98 x 18mm 98 x 20mm 98 x 25mm
Shade A2 SAP007 SAP010 SAP013 SAP016
HPdent WAX PRESS BEIGE, GREY AND ESTHETIC
Optimised for intricate high speed milling, for manufacture of copings and bridges for burnout techniques, eliminates gumming up of drill bits, the rigid material eliminates shrinkage and warping and burns out clean without residue.
RENFERT EASY BLANK WAX
Precisely milled results with extremely smooth surfaces and strong edge stability due to the high degree of material homogeneity. Especially suitable for full ceramic restorations as the wax will burn-out without residue. Reliable milling process due to small milled chips which do not stick to the cutter or the object surface.
Shade A3 SAP008 SAP011 SAP014 SAP017
Shade B1 SAP009 SAP012 SAP015 SAP018
Price £28.15 £32.55 £34.29 £37.96
Size 98 x 14mm 98 x 18mm 98 x 20mm
Shade A2/A3 SAP042 SAP053 SAP043
Shade A3/A3.5 SAP041 SAP054 SAP055
Price £62.43 £67.87 £67.87
POLIDENT RADIO OPAQUE DISC
X-ray visible disc used for milling diagnostic stents for implant planning. X- ray visible powder.
IVOCLAR Telio® CAD
Resin blocks and discs for the efficient fabrication of temporary crowns, hybrid abutments crowns and bridges using the CAD/CAM technique.
Shades A1, A2, A3, A3.5, B1, B3, BL3, C2, D2
Size 98.5 x 16mm 98.5 x 20mm
Shade: A1 SIV6582 SIV6589
Shade: A2 SIV6583 SIV6590
Shade: A3 SIV6584 SIV6591
Shade: A3.5 SIV6345 SIV6592
Shade: B1 SIV6585 SIV6593
Shade: B3 SIV6586 SIV6594
Shade: BL3 SIV6370 SIV6595 SIV6604
Shade: C2 SIV6587 SIV6596 SIV6605 Shade: D2 SIV6588 SIV6597 SIV6606
POL157 Polident Radio Opaque X-Ray 98mm Disc