PROPER APPLICATION

Choose the right surface

Clean the surface www.signssa.com.au

Cleaning the surface is the most important step in the application process. You can use soap and water to remove any dirt or residue, but make sure to thoroughly dry the surface before you start. Any moisture on the surface can create air pockets or cause the sticker to peel off.

To apply the sticker, peel off the backing paper and place the sticker in the desired location. Use a credit card or squeegee to smooth out any air bubbles, starting from the center of the sticker and working your way out. Once it's secured in place, use a hairdryer to heat the sticker for a few minutes, which will help it adhere better.

Apply the sticker www.signssa.com.au

Removing a car sticker can be tricky, especially in warm weather. Here are some steps to follow:

Before removing the sticker, use a hairdryer to heat it for a few minutes. This will soften the adhesive and make it easier to remove. Heat the sticker

Use a plastic scraper www.signssa.com.au

Using a plastic scraper, gently peel off the sticker, starting from one of the corners. Make sure to avoid using a metal scraper, as it can scratch your car's paint.

Remove any residue www.signssa.com.au

Once the sticker is removed, you may have some adhesive residue left on your car. You can use an adhesive remover or rubbing alcohol on a clean cloth to remove any remaining residue.

In conclusion, applying and removing car stickers in Adelaide's climate is easy if you follow these simple steps. Remember to choose the right surface, clean the surface properly, apply the sticker carefully, and use a hairdryer to heat the sticker. For removal, remember to heat the sticker, use a plastic scraper, and remove any adhesive residue. With these tips, you can add or remove any car sticker with ease without damaging your car's surface.