Orange 047Orange Red 035Pastel Orange 036Light Orange

• 3mil • Ultimate non glare • Permanent adhesive • Clear matte flexible overlam • Up to 4 yearoutdoor durability (verticalsurface) & resistance to ultraviolet degradation General Formulations 402 matte overlaminating vinyl filmis designed to protectdigitalimageprintsand screen printedimagesforexhibitand display graphics. Can be used in most instanceswhereanoverlay with a matte finishis requiredoninterior or exterior applications.

Revised 4-11-22

Size Item # Cost 30” x 150’ 402-30 $124.50 38” x 150’ 402-38 $158.99 54” x 150’ 402-54 $223.99 60” x 150’ 402-60 $249.99

Designed to mount backlit transparencies to plexiglass or other substrates applications. This in light product provides distortion free mounting of prints. Transparency mounting filmis constructed with optically clear polyester that is coated onboth side with optically clearadhesive and protected by 2 clear polyester liners. 106 also providesimages with valuable UV protection.

1.5mil white opaquepolyproplene film coatedonbothsides with a specially box formulatedpermanent acrylic adhesive also that is protected with a 76# liner. face Designed to mount photographic, digital, screen printed substrates such asgatorfoam, PVC, posterboard and more...

Revised 4-11-22

51”and61” Rolls canbespecial ordered

Revised 4-11-22

51”and61” Rolls canbespecial ordered

.5mil Clearpolyester film coated on bothsides with a specially formulated high tack permanent adhesive that is protected with a 76# paperliner. This clearmounting filmis designedfor long termpermanentmountingof digital prints to glass.

.5mil Clearpolyester film coatedon one sidewith a specially formulated high tack permanentadhesive onone side and a removableontheotherside. That is protected with a 76# paper liner. This clearmounting filmis designed for short termmounting of digitalprints of any kind to glassfromthe inside out.

Revised 4-11-22

Revised 4-11-22

116 is a doublecoated pressure sensitive 1mil clearpolyester film with permanentadhesiveonone side and removableadhesiveontheother side. This product is designed forlaminating thinflexibleplasticfilms under10mil in total thickness for temporary application to glass. The film is designed to produce two sided decals using digital prints,screenprints and otherprintedimages to glass. These decals remove cleanly. 116 may be usedonsubstartesotherthan glass, your specific applicationshould be testedbefore production.

54”x150’ | Item#116-54| $492.50

Revised 4-11-22

51” Roll canbespecial ordered 51” Roll canbespecial ordered

Series270 is a 6 mil. 5 year PVC laminate film formedium term outdoor paint protection of automotive fenders, rearbumpers anddeck or side skirts and other outdoorapplications. Clear solvent basedpermanent adhesive.

Size Cost

Series280 is an 8mil.7 year polyurethanelaminate film perfect for long termoutdoor paint protection ofautomotive fenders,rear bumpers anddeckor side skirts along with otheroutdoorapplications. Clear solventbasedpermanent adhesive.

Size Cost

Revised 11-5-22 Item# 24” x 10yds $290.99 280-241 24” x 25yds $680.50 280-245 30” x 10yds $422.50 280-301 30” x 25yds $841.99 280-305 50” x 10yds $659.50 280-501 50” x 25yds $1401.99 280-505

A2mil. Optically clearpremium cast PVC gloss over laminate. Creatingsignageforwindows or other transparent applications, your choice is clear. Oraguard® 290GF.8 yearopticallyclear cast film andotherapplications where the highestlevelof clarity and transparency are needed. Available in gloss with a UV protection extensionfactor of 4 years. Cold lamination is recommended

Size Cost Item# 24” x 30’ $ 74.99 10-290GF-24 30” x 30’ $ 91.00 10-290GF-30 36” x 30’ $110.50 10-290GF-36 54” x 30’ $164.99 10-290GF-54 54” x 150’ $661.50 290GF-54

Item # 290GF ( HGT )

Revised 11-5-22

4 mil GRIP & 12 milARM R LAMINATE

• 5 year outdoor • 90lb.lay flat liner • 4 Mil matte white “GRIP” • Clearhighbondpermanent adhesive • Ink eco - solvent | Latex | Thermal

54” x 150’ | $615.99 | Item #235-54

• 53lb. liner • 5 year outdoor • 12 Mil glossclear laminate • Clearpermanent adhesive 54” x 75’ | $356.99 | Item #238-54

For bestresultsuse4mil GRIP and the 12milArmor lamininate together.

Revised 4-11-22

Clear, soft and flexible with a clear permanent acrylic adhesive. Used for over-laminating when conformability to complexcurves is necessary. Convex laminates are thesoftest (and easiest) for the average person to apply to Helmets, HardHats, Motocross and ATV’s. Give you graphics the extra thickness and impact they need to survive in rough environments.

Revised10-6-21

Use Pro Shieldwhenyouneedthicklabels or decalsthatcanwithstand a lotof abrasion. Crystalclear Pro-Shield™ is thesolution for areasthatreceive a tremendousamount of abuse. Use thethicker(12 mil) laminate for theareasreceivingthemost abrasion. Pro-Shield is available in a high-gloss. It can bemolded to almostanyshapebyusing just a little heat,from a heatgun.Although Pro Shield is notassoftandpliableasConvex, it is tougher to rub through.

12mil Clear Cost Item# 13” x 10yds $78.99 CVX266 13” x 50yds $281.99 CVX267 20” x 10yds $115.99 CVX163 20” x 50yds $422.99 CVX164 27” x 50yds $639.99 CVX166

• 2.1mil Highgloss finish • Excellentdimensional stability • Protects image from scratches • Enhancescoloranddepthof image • Aidsin applicationofprinted graphics • Superiorconformability to irregular substrates • Dimensionally stable liner foreasy converting • Outstandingdurability & outdoor performance • UV | temperature | humidity | salt spray resistance

Avery DOL 1060gloss clear cast vinyl is a premium quality, flexiblehigh gloss vinyl film designedas a protective overlaminate film for screen anddigitalprinteddecals. DOL 1060 offers anexceptional value forapplications requiring glossy colors and durability. This productcan also be used asanoverlaminateforfloor graphics. • Highglossfinish(DOL 1360) • Excellentdimensional stability • Protects image from scratches • Enhancescoloranddepthof image • Aidsin applicationofprinted graphics • Superiorconformability to irregular substrates • Dimensionally stable liner foreasy converting • Outstandingdurability & outdoor performance • UV | temperature | humidity | salt spray resistance

Avery DOL 1360clear cast vinyl is premiumquality,ultra thin and ultra conformable cast vinyl film designed for use as a protective overlaminate film for solvent, UV, latexandscreenprint inks. DOL 1360 offers anexceptionalvalue, while providing excellent conformability, with abrasion resistance and durability. The gloss film nowfeatures a synthetic liner that creates a super smooth finish which providesanoverallpaint likefinish ofprinted graphics.

• 2 year durability • Economy laminate • 4mil calendered vinyl • Availablein | matte | gloss | luster • Protectsagainstabrasion | moisture | limited exposure

Pressure sensitive, clear PVC laminate. This hassolventadhesiveforthemaximum strength

Size Cost

Revised 8-23-22

38” x 147’ $129.99 28¢ sq. ft. 51” x 150’ $160.99 26¢ sq. ft. 54” x 150’ $169.50 26¢ sq. ft. 61” x 150’ $189.99 26¢ sq. ft.

Item #LAM ( G = Gloss M = Matte L= Luster )

• 30lbsbrownkraftpapercoated with a machine glaze • Designedforuseas a backer to protectthebottom roller fromadhesivewhendoingonesided lamination

Revised 5-16-22

Size

Textured over-laminating film is

printsand screen printed images for exhibit and displaygraphics. Can be used in most instances where an overlay with non-glare properties is required. This film canbeappliedtoflat, curved or rolleddisplay graphics. General Formulations 103 Textured Overlaminating Film is a pressure sensitive 5.0 mil velvet / very fine matte polycarbonate film with the optically clear RD-60A, permanent acrylic adhesive with a 1.5 mil polyester film liner. This polycarbonate film offers protection from abrasion,moisture and other environmental laminate is applied required. exposures. This cold, no heat Item # 38” x 1yd. $ 14.50 103-3801 38” x 150’ $365.50 103-38 54” x 1yd. $ 16.50 103-5401 54” x 150’ $525.99 103-54

Revised 4-12-22

This scratch resistant laminate is excellentchoicefor laminating mouse pads,countermats,floorgraphics and displays.

General Formulations 109 is designed for interior use applications. This laminatecanbeusedonfloor graphics forup to 6 monthsundernormal use.

Revised 4-12-22

Summary: GeneralFormulations 211is a6 mil clear flexible polishedcalendared vinyl film with a slighttexture designed for use

Graffic™ decals. The permanent acrylic pressure sensitiveadhesiveformulated for exceptionalclarity. GeneralFormulations211 is intended for useas the over-laminating film to produce TrafficGraffic™ floor decals. The adhesive is formulated to adhere to most common printing inks. However, specific formulations must be tested before use. Some ink may contain excessive flow additivesthatcouldreduceadhesionof this product.Test before production. GeneralFormulations 211 will function as a Traffic Graphic™ over-laminate for six month under normaluse. Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in vinyl degradation. 54”x1yd. $ 15.50 Item #211-5401 38” x 150’ | $322.99 | Item #109-38 54” x 150’ $326.50 Item #211-54 54” x 150’ | $354.50 | Item #109-54

5 yard minimum Revised 4-12-22

CommercialGrade Dry Erase Laminate with Permanent Adhesive

2-mil clearpolyesterlaminate with a high performance hard coated engineered surface. The scratch and abrasionresistantpolyester film is coated with a permanent solvent acrylic pressure sensitive adhesiveon a smoothpaper liner. Thisfilm works well withquality dry erasemarkersand its anti-graffitiproperties allows for easy removalofpermanentmarkers and crayons. EraseMark Pro™ 110 has a5 yearinteriordurability with proper care and cleaning. Forbestresults, we suggest the following dryerasebrand marking pens: Expo Scents® (chiselpoint), Expo Bold color® (chiselPoint), Expo regular® (chiselpoint)brand marking pens. It is recommended to use a microfiber cloth to cleanthe films surface.

• 2.5milclear gloss • Permanent adhesive • Provides UV protection • Uselow odordryerase pens • Noliquid forremovalof markings • Always testprintsamplepiece first

PermaFlex is a5 mil. Clear PVC film with a luster textured finish to eliminate glare,and is suitableforindoor and outdoor applications. PermaFlex providesprotection from abrasion and moistureandhelps slow color fade from UV exposure. The durability of the printedimage is dependent onthe type of ink andmedia used.

PermaFlexcan also be used as a Floor Graphiclaminate. Exceeds industry standardsfor slip resistance, when tested according to BS7976-2.

The outdoor durability in vertical applications is 3 yearsand indoor vertical applications is 5 years. Indoor floors durability is 1–3 years depending on traffic.

54” x 75’ | $433.99 | Item #PF365475 54” x 150’ | $808.50 | Item #PF3654150

Technologicallysuperior, wipe off permanentmarkers with just a soft cloth.Spray paintis easily removed with any liquid graffiti removerand a soft cloth.Extremely solvent resistant; paint stripper will noteatthrough the film. F-Cal has a unique surfacethatallows most pressure sensitive materials such as stickers anddecals to beeasilypeeled off. F-Cal is approvedby the DepartmentofTransportation and holds the highestdesignationbyCaltransas a“Premium Protective” compared to a “standard protective”.

beFORE cleaning DURING cleaning after cleaning Size

Cost Item # 24” x byLinear Yard $ 21.50 FC24 24” x 10yds $157.99 FC2410 24” x 50yds $705.50 FC2450 30” x byLinear Yard $ 32.50 FC30 30” x 10yds $179.99 FC3010 30” x 50yds $802.99 FC3050 48” x byLinear Yard $ 38.99 FC48 48” x 10yds $290.50 FC4810 48” x 50yds $1295.99 FC4850

Revised10-7-21

• Long-term protection • Outstanding graffitit resistance • 1milclear, flexible overlaminate • Weather / UV resistantup to 10 years DuPont™ Tedlar film: New andimproved film deliverssuperior UV protection, anti-graffiti with extremedurabilityandchemicalresisitance for a varietyof indoor/outdoorapplications.

54” x 150’ | $611.99 | Item #108-54

Revised 4-12-22

• 1 mil • High gloss finish • Dry erasable surface • Permanent acrylic adhesive • Protectsgraphicsfrom graffiti

VandalGuard™Anti-Graffiti / Dry Erase Laminate is a specially formulatedoverlaminatedesigned to protect screenprinted and digitallyprinted imagesand signs from a wide varietyof stains and chemicals includingpaintandpermanentmarker. Graffiti can be easilyremovedusingcommoneconomicalcleaners without damagingordulling the surfaceof the laminate Graffiti- Resistant Surface:Spray paintandpermanent marker easilywipesaway with economical cleaners.

High Gloss Finish: Signsandgraphicshave a classy professional look with enhancedcolorand depth

Ultra ClearPermanent Adhesive : Long lasting bond to vinyl and / orsubstrateeliminatingprematuredelaminationandalso allows for use with windowperforatedgraphicson flat surfaces

Clear Poly Liner: Ultra smoothadhesiveoverlay eliminating "orangepeel" often foundonlaminates with a paper liner

• 1milhighgloss film • Clear solventbased adhesive • UV extensionfactorof 3 years • Designedfor highquality protectionof large format digital printsforoutdoor applications

Avery Dennison Anti-Graffiti Series films delivers excellentabrasion and scratch resistance forshort-term graphics. Theyare specifically designed to protect digital orscreenprinted graphics.

ClearShieldwater-based liquidlaminate coatings offerthe same protection as film laminates while saving as much as60% inproduction costs. UV-protection,chemical resistance, abrasion resistanceand flexibility are just some of the benefitsof protecting your digital prints with ClearShield liquid laminate. Our coatings are specifically formulated for a variety of inks and applications such asbanners, wall coverings, canvas printsandvehiclegraphics,alsosuitable for vertical applications. ClearShield Classicis formulated for use with most non-watersensitive material.

Gloss

AerosolCan $18.99 |Item#CSGA

Quarts $39.99 |Item#CSGQ SemiGloss

AerosolCan $18.99|Item#CSSA

Quarts $39.99|Item#CSCQ Matte

AerosolCan $18.99 | Item#CSLA

Quarts $39.99 | Item#CSMQ

Gallons $96.99 |Item#CSGG Gallons $102.99|Item#CSSG Gallons $109.99 | Item#CSMG

5Gallon $449.50|Item#CS5GG

5Gallon $497.50|Item#CSSG

5Gallon $517.50|Item#CS5GM

REVISED 10/26/22 Please seeProduct Information on website for more information

•Anti graffiti • Gloss clear coat • Crack resistant surface • CTF is flexable and tolerant to expansion • Protecttraffic &commercialsignseven vehicles • Great for harshenviromentslike saltwater and high desert heatand frigid mountains •Resistant to hydraulic, lubricating and cutting oils, alcohols and more

1Quart $ 64.00 | Item#KKQT Gallon $225.00 | Item#KKGAL

Revised 4-11-22

1 Shot Speed Dry UV Acrylic Clear is a fast drying UV resistant clear topcoat that prevents colors from fading and provides mild abrasion resistance. Intended for use on interior or exterior digital prints in non - automotive applications.Dries to touch in 2 hours / UV resistant Compatible Surfaces Printed PVC vinyl’s and solvent,eco-sol, UV and thermal resin prints. Available in Quartsand12ozAerosolSprayCans

REVISED 10/26/22

Aerosol can | $15.99 | Item#4005A Quarts | $40.99 | Item#4005Q

ClearShield Anti-Graffiti Gloss is a two-part,water-based liquid laminate with excellent chemicalresistance,abrasionresistanceandunmatchedanti-graffiti properties. This versatilecoatinghasexceptionaldurabilityand is specificallyformulated for severe exteriorapplicationswherehardness, flexibility andsuperiorprotection are required. * Able to becleaned with a rangeof solvents * Effectivefor removableofaerosolpaintsand Mark-A-Lot Pens * 2 partLamCoating is highly flexible and durable * Compatible with Eco-Solvent,Latexand UV inks * Gloss finish

Part A Part B

SIZE COST ITEM # SIZE COST ITEM# 1Quart (32fl. oz.) 4 fl.oz.

Quarts $38.99 360264324 4FL.OZ. $12.84 AGCTAA 2Quart (64fl. oz.) 8 fl.oz.

Gallons $99.99 360259324 16FL.OZ. $31.47 AGCTQQ 3Quart (96fl. oz.) 12 fl.oz.

1Gallon(128fl.oz.) 16 fl.oz.