sdflex ING

SDFLEX DEVICE

VERTICAL GUIDED-TYPE FALL ARREST DEVICE WITH ANCHORAGE LINE

SDFLEX

VERTICAL LADDER SYSTEM

Bracket fixing with 2 possible plates: Omega bracket For rungs max 30 mm

Universal bracket For rungs max 50 mm

The SDFLEX is a vertical fall arrest system for ladders featuring a rigid guide rail, compliant with and certified according to harmonised standard EN 353-1+A1:2017 and PPE Regulation 2016/425/EU. The system consists of a vertical guide with an 8 mm diameter stainless steel cable. The upper end is fitted with a cable clamp and the lower end with a tensioner. The end brackets are then fixed to the ladder by means of the anchors supplied with the system.

Two configuration types are permitted: - With flush-rung upper bracket for reduced bulk - With upper bracket fitted with an outreach arm for easier top exit MATERIAL - Aluminium 6082 T6 / Stainless steel AISI 304 OPERATORS - N° MAX 1 LIFESPAN - 30 years

UNI EN 14122:2016 ”Safety of machinery - Permanent means of access to machinery”

Sliding trolley certified EN 353-1:2014 + A1:2017, to which an energy absorber and an EN 362 connector are attached, equipped with an automatic locking system.

UPPER END Bracket fixing: - Flush-rung type: at 3 rungs - Exit bracket type: at 4 rungs Cable clamp - flush-rung bracket Installed using a retaining stop fitted with a pin and split pin.

Cable clamp - exit bracket Installed by inserting the device fork into the pin, then joining the components with a pin and split pin through the hole.

DFLE

LOWER END Lower bracket fixing at 2 rungs.

Tensioner - lower bracket Installed by tightening the nut of the tensioner rod when inserted into the bracket hole.