flyer sdtrack ING

SDTRACK RANGE

RIGID LINEAR FALL ARREST ANCHORING DEVICE - TYPE D

RIGID LINEAR FALL ARREST ANCHORING DEVICE TYPE D

RANGE

SDTRACK The rigid rail fall arrest system of the SDTRACK range allows maintenance work at height to be carried out in complete safety.

The centre-to-centre spacing between fixing brackets can reach up to 6 metres depending on the chosen configuration and the direction of use of the sliding trolley.

The rail profiles can be joined together by means of dedicated joints and connectors, which can be installed near the fixing brackets or along the rail profile.

The SDTRACK range has been tested and has passed the tests required by the applicable technical standards for both fall arrest and suspension use for up to 4 people.

MATERIAL Aluminium 6082 T6 Stainless steel AISI 304 OPERATORS

UNI EN 795:2012 / UNI CEN/TS 16415:2013

RACK COMPONENTS:

TROLLEY

BRACKETS Fixing brackets for the rail profiles to the structures.

Available in 8 types with different geometries.

TROLLEY WITH POSITIONING PIN

CONNECTORS The SDTRACK range connectors are required to assemble the brackets of the rail sliding profiles.

JOINTS 2 joints required for the rail profiles.

RAIL PROFILES System featuring aluminium profiles in 4 different lengths: 3, 4, 5 and 6 metres.

USE IN: SUSPENSION When the rail is used as an anchoring system for suspension work, each user must be anchored to two trolleys, each with its own EN 362 connector.

To follow the operator’s movements as closely as possible, the anchor point can rotate 180°.

0 < x ≤ 1500 mm N° MAX OPERATORS: 2

K USE IN: FALL ARREST / WORK RESTRAINT When the rail is used as a fall arrest anchoring system, each user must be anchored with their own EN 362 connector to the trolley, which is the only usable mobile sliding point.

To follow the operator’s movements as closely as possible, the anchor point can rotate 180°.

0 < x ≤ 6000 mm N° MAX OPERATORS: 4