Issuu

DESIGN AND PRODUCTION OF ANCHORING DEVICES EN 795:2012 - CEN/TS 16415:2013

Catalogue 2015 PRODUCTION SICUR DELTA

Anchoring devices

COMPANY WITH QUALITY MANAGEMENT SYSTEM CERTIFICATE UNI EN ISO 9001 EXTENDED WELDING QUALITY REQUIREMENTS IN UNI EN ISO 3834-2

Catalogue 2015 Anchoring devices

www.sicurdelta.it

2015 Catalogue Table of Contents Sicur Delta Company Profile

SDLAM RANGE: ANCHORING DEVICES FOR CORRUGATED ROOFING Flexible horizontal line, type C

Point anchoring devices, type A

SD76 RANGE: ANCHORING DEVICES FOR STRUCTURAL MOUNTING Flexible horizontal line, type C - Safety Line Sicur Delta Roof - Safety Line Sicur Delta Wall - Safety Line Sicur Delta Flat Point anchoring devices, type A

Accompanying accessories www.sicurdelta.it

Company profile Sicur Delta is a leading manufacturer of anchoring devices for fall protection systems The company was founded by David Del Tacca, an artisan who had been working in the field of work safety since the early ‘90s, before turning to the installation of fall protection systems in the third millennium. Thanks to the technical and practical skills gained over the years spent working in construction sites, he developed a project aimed at the certified production of fall protection systems. With the aid of a team of qualified engineers and production technicians, and thanks to its own laboratory and another laboratory certified by Ministry of Infrastructures and Transport, Sicur Delta realised its first product range in 2007, in the factory located in via C. Colombo 4 in Santa Croce Sull’Arno (Pisa, Tuscany). Driven by its constant commitment to research and experimentation carried out it its own laboratory, Sicur Delta produces cutting edge anchoring systems using the most advanced technologies. This allowed us to achieve an excellent quality standard, by virtue of which we figure among the top manufacturers of fall protection systems. As we strive continuously to optimise our production, we already managed to design, test and manufacture the eighth range of our products, offering the most functional and comprehensive range of solutions for fall protection systems. Our catalogue is constantly updated by the Sicur Delta team, which is always attentive to the needs of the construction site, to the recurring evolution of the relevant standards and to the improvement of technical standards, as well as of standard for safety, quality and use. One of the key strengths of our systems is the composition and assembly of components, whose combination is flexible and reflects the needs of the construction site (pole height, base plate, terminal type and/or midrange terminal, cable length). Our team of engineers may design specific variants, whereby the range of products manufactured at our premises allows us to realise systems “tailored” to the construction characteristics. All this contributes to making our systems versatile and quick to install, as well as easy and comfortable to use. In addition to the efficient systems it manufactures, the company has implemented the ISO 9001:2008 quality process, which is certified by RINA, thus guaranteeing the entire business cycle, in order to supply a best-in-class quality service. This is the starting point of our daily work, which hinges upon the organisational principle according to which the systems and services we provide should ensure maximum durability while making room for improvements.

www.sicurdelta.it

This internationally recognised reference standard for the management and improvement of the quality system allows us to ensure the continuous availability of ready stock material, which can be delivered within 24 hours of the order day across Italy (48h for Italian islands), along with a network of highly qualified business contacts with substantial technical training for fall protection systems. Further, our technical department supports the development of projects with the aid of the customer-service department, which offers estimates, technical reports and calculations, as well as direct, on-site assistance. Our team of engineers is committed to designing new fall protection devices, to developing new technologies and patents and to designing prototypes, while at the same time taking account of the continuous updates of technical and legal standards. This also involves organising technical seminars and training sessions sponsored by trade and professional associations (here are some references on the training offered: Acquario Romano – training centre for the Rome Architects Association; Collegio dei Geometri e Geometri Laureati (Surveyor Centre) based in Lucca, Italy; several Engineers associations, based in Italian cities such as Agrigento, Trapani, Caltanissetta, etc.; Genoa Construction Institute; etc.). Some company engineers are part of technical industry boards, including the Working Group UNI “Fall Protection Devices”. It is important to emphasise that the knowledge about our products and the relevant field is continuously transferred through education and training to technicians and installers, thereby creating a network of professionals who are kept constantly up to date on issues related to the design of fall protections; these include for example external staff specifically trained for the installation of our products, named IQS (Installatore Qualificato SicurDelta, or SicurDelta Qualified Installer). This allows us to disclose the background of experience we “earn” day by day from our work. Our website, www.sicurdelta.it, is a tool made available to our customers for commercial and technical support: it allows them to browse and download the entire documentation concerning our production, such as sheets, CAD blocks, technical specification items, catalogues, installation manuals as well as the certifications issued by an accredited laboratory; moreover, we realised an on-line configuration tool, www.sicurdelta.net: this is a service and support tool developed to assist designers thanks to its full-blown, functional and user-friendly interface.

MISSION Our main goal is to realise a manufacturing process based on demanding quality and safety standards, ensured through cycles of control, mechanisation, and employees training, which contributes to creating a traceability process supervised and validated by third parties. This results in the production of effective fall protection systems that comply with the applicable technical standards. www.sicurdelta.it

Company profile PRODUCTION ITALIAN COMPANY MANUFACTURING EN795 ANCHORING DEVICES FOR FALL PROTECTION, WITH UNI EN ISO 9001 CERTIFIED QUALITY MANAGEMENT SYSTEM QUALITY REQUIREMENTS EXTENDED FOR UNI EN ISO 3834-2 WELDING

Both the ISO 9001:2008 and the ISO3834-2: 2006 certifications were issued by RINA Services SpA, with certificate No. 30436/14/S and 3834-601/14/S, respectively. The UNI EN ISO 3834-2:2006 standard is a guideline that lays down the quality requirements for a proper production process based on welding. The latter should not be understood merely as the realisation of welded joints, but rather as a cluster of operations that make the production of the welded item possible. In this respect, for the production of its anchoring devices Sicur Delta developed a weldingbased manufacturing process that begins with a suitable design, after which the item undergoes a control procedure concerning the supply of materials, the preparation process, the efficiency of the equipment used, the competence of human resources, and the actual welding process, up to the final audits; clearly, these steps may have some influence on the final quality of the products: each of them, therefore, requires due attention and an effective level of control.

As we manufacture life-saving devices, we know that every step taken towards improving production quality is a step towards ensuring a greater safety level for the final user.

www.sicurdelta.it

CERTIFICATO N. CERTIFICATE No.

30436/14/S

SI CERTIFICA CHE IL SISTEMA DI GESTIONE PER LA QUALITÀ DI

IT IS HEREBY CERTIFIED THAT THE QUALITY MANAGEMENT SYSTEM OF

Per informazioni sulla validità del certificato, visitare il sito www.rina.org

SICUR DELTA S.R.L.

For information concerning validity of the certificate, you can visit the site www.rina.org

VIA C. COLOMBO, 4 56029 SANTA CROCE SULL'ARNO (PI) ITALIA NELLE SEGUENTI UNITÀ OPERATIVE / IN THE FOLLOWING OPERATIONAL UNITS

VIA C. COLOMBO, 4 56029 SANTA CROCE SULL'ARNO (PI) ITALIA Riferirsi al Manuale della Qualità per i dettagli delle esclusioni ai requisiti della norma

È CONFORME ALLA NORMA / IS IN COMPLIANCE WITH THE STANDARD

ISO 9001:2008

Reference is to be made to the Quality Manual for details regarding the exemptions from the requirements of the standard

PER I SEGUENTI CAMPI DI ATTIVITÀ / FOR THE FOLLOWING FIELD(S) OF ACTIVITIES

PROGETTAZIONE E COSTRUZIONE DI ANCORAGGI STRUTTURALI E DISPOSITIVI DI ANCORAGGIO PER SISTEMI ANTICADUTA. COMMERCIALIZZAZIONE DI DISPOSITIVI DI PROTEZIONE INDIVIDUALE. PROGETTAZIONE, COSTRUZIONE E SALDATURA DI COMPONENTI METALLICI E CARPENTERIA LEGGERA NON STRUTTURALE.

EA:17 EA:29

DESIGN AND CONSTRUCTION OF STRUCTURAL ANCHORS AND ANCHORING DEVICES FOR FALL ARREST SYSTEMS. TRADE OF PERSONAL PROTECTIVE EQUIPMENT. DESIGN, CONSTRUCTION AND WELDING OF METAL COMPONENTS AND LIGHT STEEL NON STRUCTURAL WORKS.

La validità del presente certificato è subordinata a sorveglianza periodica annuale / semestrale ed al riesame completo del sistema di gestione con periodicità triennale The validity of this certificate is dependent on an annual / six monthly audit and on a complete review, every three years, of the management system L'uso e la validità del presente certificato sono soggetti al rispetto del documento RINA: Regolamento per la Certificazione di Sistemi di Gestione per la Qualità The use and validity of this certificate are subject to compliance with the RINA document : Rules for the certification of Quality Management Systems

Prima emissione First Issue

27.03.2014

Emissione corrente Current Issue

27.03.2014

Data scadenza Expiry Date

26.03.2017

Ing. Michele Francioni (Chief Executive Officer)

RINA Services S.p.A.

CISQ è la Federazione Italiana di Organismi di Certificazione dei sistemi di gestione aziendale CISQ is the Italian Federation of management system Certification Bodies

Via Corsica 12 - 16128 Genova Italy

SGQ N° 002 A SGA N° 002 D PRD N° 002 B SCR N° 003 F

SSI N° 001 G DAP N° 001 H PRS N° 066 C LAB N° 0832

Membro degli Accordi di Mutuo Riconoscimento EA, IAF e ILAC Signatory of EA, IAF and ILAC Mutual Recognition Agreements

www.sicurdelta.it

Company profile

IQNet and CISQ/RINA hereby certify that the organisation

SICUR DELTA S.R.L. VIA C. COLOMBO, 4 56029 SANTA CROCE SULL'ARNO (PI) ITALIA

has implemented and maintains a

Quality Management System which fulfills the requirements of the following standard

ISO 9001:2008

in the following operative units

VIA C. COLOMBO, 4 56029 SANTA CROCE SULL'ARNO (PI) ITALIA

for the following field of activities DESIGN AND CONSTRUCTION OF STRUCTURAL ANCHORS AND ANCHORING DEVICES FOR FALL ARREST SYSTEMS. TRADE OF PERSONAL PROTECTIVE EQUIPMENT. DESIGN, CONSTRUCTION AND WELDING OF METAL COMPONENTS AND LIGHT STEEL NON STRUCTURAL WORKS.

Registration Number: First Issue :

2014-03-27

Current Issue : 2014-03-27

IT-94472

Expiry Date : 2017-03-26

The status of validity of the certificate can be verified at http://www.cisq.com or by e-mail to fedcisq@cisq.com

www.sicurdelta.it

CERTIFICATO N. CERTIFICATE No.

3834-601/14/S

SI CERTIFICA CHE IL SISTEMA DI GESTIONE PER LA QUALITÀ DI

Per informazioni sulla validità del certificato, visitare il sito www.rina.org

IT IS HEREBY CERTIFIED THAT THE QUALITY MANAGEMENT SYSTEM OF

For information concerning validity of the certificate, you can visit the site www.rina.org

SICUR DELTA S.R.L. VIA C. COLOMBO, 4 56029 SANTA CROCE SULL'ARNO (PI) ITALIA NELLE SEGUENTI UNITÀ OPERATIVE / IN THE FOLLOWING OPERATIONAL UNITS

VIA C. COLOMBO, 4 56029 SANTA CROCE SULL'ARNO (PI) ITALIA

È CONFORME ALLA NORMA IS IN COMPLIANCE WITH THE STANDARD

ISO 3834-2:2006 PER I SEGUENTI CAMPI DI ATTIVITÀ / FOR THE FOLLOWING FIELD(S) OF ACTIVITIES

EA:17

COSTRUZIONE E SALDATURA DI ANCORAGGI PER SISTEMI ANTICADUTA E CARPENTERIA LEGGERA NON STRUTTURALE Riferirsi al Manuale della Qualità per i dettagli delle esclusioni ai requisiti della norma

CONSTRUCTION AND WELDING OF ANCHORING DEVICES FOR FALL ARREST SYSTEMS AND LIGHT STEEL NON STRUCTURAL WORKS

Reference is to be made to the Quality Manual for details regarding the exemptions from the requirements of the standard

The use and validity of this certificate are subject to compliance with the RINA document : Rules for the certification of Quality Management Systems

Prima emissione First Issue

27.03.2014

Emissione corrente Current Issue

27.03.2014

Data scadenza Expiry Date

26.03.2017

Ing. Michele Francioni (Chief Executive Officer) CISQ è la Federazione Italiana di Organismi di Certificazione dei sistemi di gestione aziendale

RINA Services S.p.A.

Via Corsica 12 - 16128 Genova Italy

SGQ N° 002 A SGA N° 002 D PRD N° 002 B SCR N° 003 F

CISQ is the Italian Federation of management system Certification Bodies

SSI N° 001 G DAP N° 001 H PRS N° 066 C LAB N° 0832

Membro degli Accordi di Mutuo Riconoscimento EA, IAF e ILAC Signatory of EA, IAF and ILAC Mutual Recognition Agreements

www.sicurdelta.it

Company profile LASER CUT

To cut our steel we make use of laser technology, which is currently the dominant technique in the manufacturing industry; essentially, it involves concentrating a large amount of light on a very small surface; the working principle during cutting operations is fusion. Compared to other tools, it offers a sharper and more defined cut with no irregular edges (as required by the product technical standard); the creation of zones altered by overheating rules out mechanical deformations of the workpiece.

MARKING

It is performed on a plate or on a pipe with micro-impulse seal presses, which allow direct engraving on metallic materials.

FOLDING

The folding process, which is virtually fully automatized, is carried out as a cold folding procedure with Vimercati folding presses.

www.sicurdelta.it

Company profile

WELDING

Welding processes and operators have been qualified by Sicur Delta. Welds are realised with the aid of an automatized Panasonic Ta 1400 platform, a 6-axis, DC arc welding robot which enabled us to achieve a fully automatized process. This has many advantages compared to conventional welding techniques, ranging from greater accuracy and weld quality to reduction of waste; moreover, parts require less reprocessing, and, most importantly, a high level of safety can be achieved by monitoring the parameters on a continuous basis.

CRIMPING

This operation, which involves blocking steel cable terminals, is performed with a hydraulic press. This operation is irreversible, whereby an 8-mm, 316 stainless steel cable can reach an axial draw of about 40 kN.

HOT DIP GALVANISING - S 235 Steel

S235 steel products are galvanised by dipping in molten zinc (â€œhot dip galvanisingâ€?), thanks to which the corrosion-resistance parameters prescribed by the EN 795 standard can be largely met, as proved by the salt spray test.

SANDING - Stainless Steel

Stainless steel products undergo a process named sanding, which helps to remove impurities while giving the devices a homogeneous aspect.

www.sicurdelta.it

Company profile PRODUCT TRACEABILITY AND REGISTERED MARK The technical standard EN 795 refers to the EN 365 standard with respect to the requirements for marking devices; the latter states at point 4.8.1: «…marked in a clear, indelible an permanent way by the manufacturer... ...with any suitable means that do not harm materials» With our marking systems, which are applied directly onto the components of the device (as this is made of metal), it is possible to ensure durability over time, while preventing counterfeiting and ensuring product traceability. Each product is marked in a clear, indelible an permanent way. With its trademarks, Sicur Delta guarantees each component of the anchoring devices it manufactures, while taking responsibility towards its end customers for quality, safety and compliance with the applicable standards; as these materials, such as EN 795 devices, are subjected to technical norms, Sicur Delta imprints its own brand not only onto the device, but also on each device component.

LABORATORY TESTS AND COMPLIANCE WITH THE APPLICABLE STANDARDS Once it has been designed, the product range is tested in certified test facilities by THIRD PARTIES, who verify whether the products comply with the applicable standards. Today, these tests on Sicur Delta products are carried out by DOLOMITICERT, with the purpose of declaring whether they comply with the EN 795:2012 + CEN/TS 16415:2013 standard, with respect to the product type to which the anchoring device is associated: • •

EN 795:2012 - corrosion- and deformation-resistance, dynamic resistance and intactness, static resistance. CEN/TS 16415:2013 – dynamic resistance and intactness, static resistance.

The tests carried out pursuant to the CEN/TS 16415:2013 standard prove that the product may be used by several operators at the same time, whereby the maximum number of operators varies depending on the model. All compliance reports can be viewed and downloaded at www.sicurdelta.it. 14

www.sicurdelta.it

EN 795:2012 CEN/TS 16415:2013

www.sicurdelta.it

ANCHORING DEVICES for CORRUGATED ROOFING SDLAM Range

PRODUCTION SICUR DELTA STAINLESS STEEL

www.sicurdelta.it

Horizontal flexible line Type C Installations: - DETACHABLE - PERMANENT

EN 795:2012 CEN/TS 16415:2013 Type C

Linear anchoring device SDLAM The range of corrugated roofing is designed, tested and manufactured for applications on both even and sloping sandwich-type, corrugated roofing.

STAINLESS STEEL

Applications:

SANDWICH STEEL PANELS MINIMUM THICKNESS 4/10 SANDWICH ALUMINIUM PANELS MIN. THICKNESS 6/10 SHEET STEEL PANELS MINIMUM THICKNESS 4/10 Upper fastening with the rivets provided with the device. In addition to reducing the time required for installing the devices, the operation is cost-saving as it allows for direct fastening onto the panel extrados.

www.sicurdelta.it

ORDER COMPOSITION DIAGRAM SINGLE-SPAN LINE COMPOSITION No 1 No. XX mt.

SDLAMKIT SD00700A

(End kit of TYPE C per for corrugated roofing) (Cable by linear metre, with one crimped end included)

XX = distance between end clamps (mim. span 3 mt., max span 15 mt.)

MULTI-SPAN LINE COMPOSITION No 1 No Y No. XX mt.

SDLAMKIT (End kit of type C per for corrugated roofing) SDLAMINT (Intermediate support of type C for corrugated roofing) SD00700A (Cable by linear metre, with one crimped end included)

Y = Number of spans - 1 XX = distance between end anchors (max span 100 mt.)

SYSTEM COMPOSITION DIAGRAM

END SUPPORT INTERMEDIATE SUPPORT STRETCHER CABLE CLAMPING TERMIMAL

AN SP

M MU I t X MA .00 m 5 1

M MU

0 3.0

AN SP

ER OV

N PA S L

X MA

mt .00 0 10 ABSORBER

END SUPPORT

www.sicurdelta.net

Calculate the stress ratio on your line www.sicurdelta.it

Flexible horizontal line, Type C - SDLAM END KID TYPE C FOR CORRUGATED ROOFING It is called a kit because a single code includes the delivery of the whole equipment needed to realise a flexible, horizontal, single-span line, including the mounting rivets. The cable, which is not included, must be added for the amount of metres required. In order to realise multi-span lines, in addition to the required cable length it is necessary to order also the intermediate anchoring devices required. Components: END SUPPORTS: upper diagonal support, lower diagonal support, anchor block plate, socket eyebolt. Standard end supports can be adjusted at centre distances between the spacings of the corrugated elements of 25 cm and 33 cm (ready in factory). Is possible to have out of standard supports adaptable to distances of to 50cm. LOCKING PINS Interface for anchoring executed directly on the extrados of the sandwich panel using the rivets provided. INSTALLATION FASTENERS These are necessary to attach the end support components to each other and to the locking pins. RIVETS Each locking pin requires 9 rivets. 10 rivets are provided for each pin, which means that each kit includes 100 rivets. Heliciform ENERGY ABSORBER made of stainless steel. It serves the function of absorbing the stress created by the fall of the system user, by reducing the impact force exerted on the end anchors. It is installed directly between the support head and the cable. To ensure product traceability, the Sicur Delta mark is imprinted on both forks.

STAINLESS STEEL

www.sicurdelta.it

STRETCHER with two welded forks, featuring a closed AISI 316 stainless steel tensioner, which is necessary to adequately regulate the cable tension. It is installed directly between the support head and the cable clamping terminal. Both threaded pins include holes in which the warranty seal can be applied. To ensure product traceability, the Sicur Delta mark is imprinted on it. CABLE CLAMPING TERMINAL with internal nose cap for ensuring a greater hold with respect to the traction-resistance of the cable itself. It is made of AISI 316 stainless steel. Considering that the technical product standard EN 795:2012 prohibits the use of U-shaped clamps, this system increases its hold while at the same time progressively increasing the traction exerted on the cable. It has been tested in laboratory, both on the whole system and with traction tests limited to the installed cable. WARRANTY SEAL, on which the system No. is indicated. It guarantees that the stretcher has not been used yet, and hence that the cable has not been disassembled and then re-assembled by unauthorised personnel. Whenever the system is inspected or serviced, replacement is followed by the registration of the new identification number, which certifies that system has been checked. IDENTIFICATION PLATE, which is necessary to indicate inspection and maintenance operations on permanent systems, as well as any relevant notes and system references. Stainless steel supports Code

Description

Dimension

SDLAMKIT

SDLAM line kit, Type C

Universal

www.sicurdelta.net

Calculate the stress ratio on your line

www.sicurdelta.it

Flexible horizontal line, Type C - SDLAM INTERMEDIATE SUPPORT OF TYPE C FOR CORRUGATED, SANDWICH-TYPE ROOFING Intermediate glazing support for linear anchoring devices of Type C, SDLAM range. STAINLESS STEEL

Components: DETACHABLE SUPPORT: upper diagonal support, lower diagonal support, plug eyebolt Intermediate supports can be adjusted at centre distances between the spacings of the corrugated elements of 25 cm and 50 cm. LOCKING PINS Interface for fastening directly on the extrados of the sandwich panel using the rivets provided. INSTALLATION FASTENERS These are necessary to attach the intermediate support components to each other and to the locking pins. RIVETS Each locking pin requires 9 rivets. 10 rivets are provided for each pin, which means that each kit includes 40 rivets.

Stainless steel supports Code

Description

Dimension

SDLAMINT

SDLAM intermediate, type C

Universal

CABLE FOR LINEAR ANCHORING DEVICES

STAINLESS STEEL

AISI 316 stainless steel cable with nominal diameter of 8 mm and with 7 strands, each of which is made up of 7 wires. The cable is delivered with a crimped end, while the other end must be integrated with a thimble using the cable clamping terminal when laying the cable. Identification and traceability of the product: to vouch for the high quality and hold ratio of the product, the cable is internally equipped with a strip marked by Sicur Delta; on the workshop-manufactured crimp the SD trademark is engraved, along with the lot number of the cable and the square footage. AISI 316 stainless steel cable Code

SD00700A

www.sicurdelta.it

Description

Cable by linear metre with one crimped end

Dimension

By the metre

www.sicurdelta.it

Point devices, Type A

Installations: - DETACHABLE - PERMANENT

EN 795:2012 CEN/TS 16415:2013 Type A

Point anchoring devices SDLAM The range of “sandwich-type”, corrugated roofing is designed, tested and manufactured for applications on both even and sloping sandwichtype, corrugated roofing.

STAINLESS STEEL

Applications:

www.sicurdelta.it

Point devices, Type A - SDLAM TYPE A DEVICE FOR CORRUGATED ROOFING

STAINLESS STEEL

Unidirectional anchoring device of type A for 2 operators, designed with four clamping pins. It is suitable for both even and sloping roofing. It can withstand the stress transmitted along its major axis on the slope of the pitch, whether this is parallel or orthogonal to the axis of the corrugated elements of the panel. Components: LOCKING PINS Interface for clamping directly on the extrados of the sandwich panel using the rivets provided. INSTALLATION FASTENERS These are necessary to attach the device components to each other and to the locking pins. RIVETS Each locking pin requires 9 rivets. 10 rivets are provided for each pin, which means that each kit includes 40 rivets. Stainless steel device Code

SDLAM01A

Description

Type A, for sandwich-type roofing

Dimension

Universal

Installations: - DETACHABLE - PERMANENT

MONO-CORRUGATED DEVICE OF TYPE A FOR CORRUGATED ROOFING

STAINLESS STEEL

Unidirectional anchoring device of type A for 2 operators, designed with detachable / removable anchoring point, for sloping and flat roofing. It can withstand the stress transmitted along its major axis, i.e., when this is parallel to the axis of the corrugated elements of the panel. Once it is installed, the anchoring point is oriented toward the direction of load application. Provided with 20 installations rivets, eyebolt-type anchoring point and installation fasteners. Stainless steel device Description

Code

SDLAMCEA

Type A, for sandwich-type roofing

Installations: - DETACHABLE - PERMANENT

www.sicurdelta.it

Dimension

Universal

TYPE A, PERMANENT, MONO-CORRUGATED DEVICE FOR CORRUGATED, SANDWICH-TYPE ROOFING

STAINLESS STEEL

Unidirectional anchoring device of type A for 2 operators, with single-component design for sloping and flat roofing. It can withstand the stress transmitted along its major axis, i.e., when this is parallel to the axis of the corrugated elements of the panel. Once it is installed, the anchoring point is oriented downstream. Single device that need not be assembled; it is provided with 20 installation rivets. Stainless steel device Description

Code

Type A, permanent, for sandwich-type roofing

SDLAM02A

Dimension

Universal

Installations: - PERMANENT

www.sicurdelta.it

to access technical data sheets and product certifications

www.sicurdelta.it

EN 795:2012 CEN/TS 16415:2013

www.sicurdelta.it

ANCHORING DEVICES for STRUCTURAL MOUNTING SD76 RANGE

PRODUCTION SICUR DELTA

www.sicurdelta.it

Horizontal flexible line Type C Installations: - DETACHABLE - PERMANENT

Linear anchoring devices SD76

STAINLESS STEEL

EN 795:2012 CEN/TS 16415:2013 Type C

www.sicurdelta.it

www.sicurdelta.it www.sicurdelta.it

31 67

Horizontal flexible line Type C

EN 795:2012 CEN/TS 16415:2013 Type C

Installations: - DETACHABLE - PERMANENT

Sicur Delta Safety Line Roof Although it is mostly designed for installations on both even and sloping roofing, the Roof range is also suitable for working areas of various types with even or sloping working areas, where a pole-type support is installed on an extrados with a suitable structure, with the tubular element lying vertically and upwards.

STAINLESS STEEL

Versatile and complete pole-type support element: the different shapes of the bases allow you to choose the most suitable model depending on the mounting support structure, while the different heights available allow you to penetrate diverse stratigraphy. As the pole is round, it increases the performance of waterproofing systems, while avoiding sharp edges and corners that might turn into critical detachment points in the long run.

www.sicurdelta.it

SYSTEM COMPOSITION DIAGRAM

ABSORBER END HEAD

INTERMEDIATE HEAD FOR BEND THE SYSTEM ALLOWS FOR 3 CABLE BENDS END HEAD STRETCHER INTERMEDIATE HEAD

t 0m

N SPA M t MU NI 3.00 m MI

N .0 SPA 100 X M A MU mt NM XI 0 SPA MA 15.0 L AL ER OV

INTERMEDIATE HEAD FOR BEND THE SYSTEM ALLOWS FOR 3 CABLE BENDS

CABLE CLAMPING TERMIMAL

www.sicurdelta.net

Calculate the stress ratio on your line www.sicurdelta.it

www.sicurdelta.it

Flexible horizontal line, Type C - ROOF FLAT POLE BASE This flat base pole support element is used as a component for linear anchoring devices of type C, to which the head element must be mounted in order to realise a complete support. Base plate with plan dimensions of 15x25 cm; the tubular element is realised with a hollow profile with circular section (external diameter 76 mm). It is used for anchoring on structures with flat extrados, such as reinforced concrete kerbs and beams, wooden beams and steel supports. The base is fastened on the extrados of this suitable structure, with the tubular element lying vertically and upwards. Fastening is possible by means of guard plates of different forms, including plates with the same dimensions, thickness and holes as the base. Stainless steel supports Code

Description

Dimension

SD76015A

Flat base pole

15cm

SD76035A

Flat base pole

35cm

SD76050A

Flat base pole

50cm

SD76060A

Flat base pole

60cm

Hop dip galvanised S235 supports Code

Description

Dimension

SD76015Z

Flat base pole

15cm

SD76035Z

Flat base pole

35cm

SD76050Z

Flat base pole

50cm

SD76060Z

Flat base pole

60cm

www.sicurdelta.it

Flexible horizontal line, Type C - ROOF RIDGE POLE BASE This pole support element with a double slope of 16.7째 is used as a component for linear anchoring devices of type C, to which the head element must be mounted in order to realise a complete support. Base plate with plan dimensions of 24.5x24.5 cm; the tubular element is realised with a hollow profile with circular section (external diameter 76 mm). It is used for anchoring on structures with equalised extrados, such as reinforced concrete kerbs and beams, wooden beams and steel supports. It is mostly used on roof ridges. Stainless steel supports Code

Description

Dimension

SD76C35A

Ridge pole

35cm

SD76C50A

Ridge pole

50cm

SD76C60A

Ridge pole

60cm

Hop dip galvanised S235 supports

Code

Description

Dimension

SD76C35Z

Ridge pole

35cm

SD76C50Z

Ridge pole

50cm

SD76C60Z

Ridge pole

60cm

www.sicurdelta.it

PITCH POLE BASE This pole support element with a single slope of 16.7째 is used as a component for linear anchoring devices of type C, to which the head element must be mounted in order to realise a complete support. Base plate with plan dimensions of 15x25 cm; the tubular element is realised with a hollow profile with circular section (external diameter 76 mm). It is used for anchoring on sloping surfaces, such as reinforced concrete kerbs and beams, wooden beams and steel supports. Fastening is possible by means of guard plates of different forms, including plates with the same dimensions, thickness and holes as the base. Stainless steel supports Code

Description

Dimension

SD76F35A

Pitch pole

35cm

Hop dip galvanised S235 supports Code

SD76F35Z

Description

Dimension

Pitch pole

35cm

www.sicurdelta.it

Flexible horizontal line, Type C - ROOF END HEADS FOR POLES SINGLE-HEAD ELEMENT It consists of a plate with a central hole for installing the pole-type support element, using the locking bolt provided with the latter. It is used to realise end supports for the linear anchoring device of TYPE C (flexible horizontal clamping line). The punched end in the front of the element allows for the insertion of the energy absorber and/or of the stretcher. Stainless steel element Code

Description

Dimension

SD00200A

Single head

Universal

Hop dip galvanised S235 element

SD00200Z

Single head

Universal

DOUBLE HEAD ELEMENT It consists of a plate with a central hole for installing the pole-type support element, using the locking bolt provided with the latter. It is used in two cases: â€˘ To realise end supports of the linear anchoring device of TYPE C, whereby an anchoring line ends and another starts on the same pole-type element, as the element has two drilled ends, one in the front and one in the rear, which allow for the insertion of the energy absorber, on the one hand, and of the stretcher, on the other hand. â€˘ To realise end supports of the linear anchoring device of TYPE C from a punched end, while the other, free end can be used for a direct connection using an EN 362 connector, which, in turn, makes the device function as a point anchoring device of TYPE A.

Stainless steel element Code

Description

Dimension

SD00300A

Double head

Universal

Hop dip galvanised S235 element

SD00300Z

Starting point of horizontal flexible line Type C

Double head

Universal

Double starting point of horizontal flexible line Type C

Anchoring point for linear anchoring device Type A

www.sicurdelta.it

GLAZING HEADS FOR POLES INTERMEDIATE / CURVE HEAD ELEMENT It consists of a double plate with inserted pulleys that allow the cable to pass through. The lower plate has a central hole for installing the pole-type support element, using the locking bolt provided. It is used to realise intermediate supports of the linear anchoring device of TYPE C, at it allows the cable to pass through continuously. In addition to the standard configuration, in which the cable passes through straightly, this intermediate head also allows you to make directional changes to the safety line, as the cable can rotate when it exits the element, based on the length on plan. Stainless steel element Code

Description

Dimension

SD00410A

Intermediate / curve head

Universal

Hop dip galvanised S235 element

SD00410Z

Intermediate / head

Universal

Intermediate / curve head element for cable that passes through straightly

Intermediate / curve head element with cable making change of direction

www.sicurdelta.it

Flexible horizontal line, Type C - ROOF CABLE FOR LINEAR ANCHORING DEVICES STAINLESS STEEL

AISI 316 stainless steel cable with nominal diameter of 8 mm and with 7 strands, each of which is made up of 7 wires. The cable is delivered with a crimped end, while the other end must be integrated with a thimble using the cable clamping terminal when laying the cable. Identification and traceability of the product: to vouch for the high quality and hold ratio of the product, the cable is internally equipped with a strip marked by Sicur Delta; on the workshop-manufactured crimp, the SD trademark is engraved, along with the lot number of the cable and the square footage. AISI 316 stainless steel cable Code

SD00700A

Description

Cable by linear metre with one crimped end

www.sicurdelta.it

to access technical data sheets and product certifications

www.sicurdelta.it

Dimension

By the metre

COMPONENTS FOR FLEXIBLE HORIZONTAL SAFETY LINE OF TYPE C STAINLESS STEEL

Single packaging that includes the elements needed to realise the flexible horizontal safety line of TYPE C, in accordance with the technical standard of reference as well as laboratory tests. Components: Heliciform ENERGY ABSORBER made of AISI 302 stainless steel. It has the function of absorbing the stress created by the fall of system users, by reducing the impact force exerted on the end anchors. It is installed directly between the support head and the cable. To ensure product traceability, the Sicur Delta mark is imprinted on both forks. STRETCHER with two welded forks with closed AISI 316 stainless steel pipe, which is necessary to adequately regulate the cable tension. It is installed directly between the support head and the cable clamping terminal. Both threaded pins include holes in which the warranty seal can be applied. To ensure product traceability, the Sicur Delta mark is imprinted on it. CABLE CLAMPING TERMINAL with internal nose cap for ensuring a greater hold with respect to the traction-resistance of the cable itself. It is made of AISI 316 stainless steel. Considering that the technical product standard EN 795:2012 prohibits the use of U-shaped clamps, this system increases its hold while at the same time progressively increasing the traction exerted on the cable. It has been tested in laboratory, both on the whole system and with traction tests limited to the installed cable. WARRANTY SEAL, on which the system No. is indicated. It guarantees that the stretcher has not been used yet, and hence that the cable has not been disassembled and the reassembled by unauthorised personnel. Whenever the system is inspected or serviced, replacement is followed by the registration of the new identification number, which certifies that system has been checked. IDENTIFICATION PLATE, which is necessary to indicate inspection and maintenance operations on permanent systems, as well as any relevant notes and system references.

Stainless steel elements Code

Description

SD001000

Safety line components kit

www.sicurdelta.it

Dimension

Horizontal flexible line Type C

EN 795:2012 CEN/TS 16415:2013 Type C

Installations: - DETACHABLE - PERMANENT

Sicur Delta Safety Line Wall

The Wall range is designed for fastening on vertical surfaces, namely, for the so called wall-mounted installations. Once you are anchored to the flexible horizontal line of the Wall range, you may operate on even or sloping working areas, which are in fact the typical application target of this anchoring system. Safety line system with vertical plate-type support element, allowing for multi-directional patterns of the safety lines relative to the clamping surface. A very common configuration consists in creating a ring-shaped line around the building; a typical example could be a lift roof compartment that protrudes from the roof walkable surface.

www.sicurdelta.it

SYSTEM COMPOSITION DIAGRAM VERTICAL PLATE SUPPORT WITH END HEAD

VERTICAL PLATE SUPPORT WITH END HEAD

STRETCHER

ABSORBER INTERMEDIATE HEAD

THE SYSTEM ALLOWS FOR 3 CABLE BENDS

MU 3.0 M SPA 0m N t

MA XIM UM 15. SP 00 mt AN OV E

CABLE CLAMPING ENDSTÜCK SPERTERMIMAL RE SEIL

SPA N

MA X1

00.

CORNER SUPPORT WITH INTERMEDIATE HEAD FOR BEND

www.sicurdelta.net

Calculate the stress ratio on your line www.sicurdelta.it

Flexible horizontal line, Type C - WALL VERTICAL PLATE SUPPORT

The safety line can be configured both parallel and perpendicular to the support

www.sicurdelta.it

VERTICAL PLATE SUPPORT It is used as a component for linear anchoring devices of type C, to which the head element must be mounted in order to realise a complete support. It is suitable for installations on vertical supports with different structural composition, e.g. reinforced concrete or steel. Fastening is possible by means of guard plates of different forms, including the same size as the base in terms of dimensions, thickness and holes. Hop dip galvanised S235 supports Code

SD00182Z

Description

Vertical plate

Dimension

Universal

INTERNAL / EXTERNAL CORNER PLATE SUPPORT It consists of a plate with rectangular base and with a central 90째-angle, which faces the outside of the installation surface in case of external corner models, and the inside in case of internal corner models. A half plate has a dimension of 100x125 mm, with 2 non-aligned, slotted holes for fastening the structure to the support. It allows for directional changes of the wall-mounted safety line, while at the same time working as an intermediate glazing element, as the bent head element must be mounted on the centrally punched corner plate. Hop dip galvanised S235 supports Code

Description

Dimension

SD00923Z

External corner plate

Universal

SD00924Z

Internal corner plate

Universal

www.sicurdelta.it

Flexible horizontal line, Type C - WALL END HEADS FOR VERTICAL PLATE SINGLE-HEAD ELEMENT It consists of a plate with a central hole for installing the vertical plate support element, using the locking bolt provided with the plate. It is used to realise end supports for the linear anchoring device of Type C. The punched end in the front of the element allows for the insertion of the }energy absorber and/or of the stretcher. Hop dip galvanised S235 element

SD00200Z

Single head

Universal

DOUBLE HEAD ELEMENT It consists of a plate with a central hole for installing the support element, using the locking bolt provided with the plate. It is used in two cases: â€˘ To realise end supports of the linear anchoring device of TYPE C, whereby an anchoring line ends and another starts on the same pole-type element, as the element has two drilled ends, one in the front and one in the rear, which allow for the insertion the energy absorber, on the one hand, and of the stretcher, on the other hand. â€˘ To realise end supports of the linear anchoring device of TYPE C from a punched end, while the other, free end can be used for a direct connection using an EN 362 connector, which, in turn, makes the device function as a point anchoring device of TYPE A.

Hop dip galvanised S235 element

SD00300Z

Starting point of horizontal flexible line Type C

Double head

Universal

Double starting point of horizontal flexible line Type C

Anchoring point for linear anchoring device Type A

www.sicurdelta.it

GLAZING HEADS FOR VERTICAL PLATE INTERMEDIATE / CURVE HEAD ELEMENT It consists of a double plate with inserted pulleys that allow the cable to pass through. The lower plate has a central hole for installing the pole-type support element, using the locking bolt provided. It is used to realise intermediate supports of the linear anchoring device of TYPE C, at it allows the cable to pass through continuously. In addition to the standard configuration, in which the cable passes through straightly, this intermediate head also allows you to make directional changes to the safety line, as the cable can rotate when it exits the element, based on the length on plan. Hop dip galvanised S235 element

SD00410Z

Intermediate / curve head

Universal

Intermediate / curve head element for cable that passes through straightly

Intermediate / curve head element with cable making change of direction

www.sicurdelta.it

Flexible horizontal line, Type C - WALL CABLE FOR LINEAR ANCHORING DEVICES STAINLESS STEEL

AISI 316 stainless steel cable with nominal diameter of 8 mm and with 7 strands, each of which is made up of 7 wires. The cable is delivered with a crimped end, while the other end must be integrated with a thimble using the cable clamping terminal when laying the cable. Identification and traceability of the product: to vouch for the high quality and hold ratio of the product, the cable is internally equipped with a strip marked by Sicur Delta; on the crimp made in the workshop the SD trademark is engraved, along with the lot number of the cable and the square footage. AISI 316 stainless steel cable Code

SD00700A

Description

Cable by linear metre with one crimped end

www.sicurdelta.it

to access technical data sheets and product certifications

www.sicurdelta.it

Dimension

By the metre

COMPONENTS FOR FLEXIBLE HORIZONTAL SAFETY LINE OF TYPE C STAINLESS STEEL

Single packaging that includes the elements needed to realise the flexible horizontal safety line of TYPE C, in accordance with the technical standard of reference as well as laboratory tests. Components: Heliciform ENERGY ABSORBERS made of AISI 302 stainless steel. It has the function of absorbing the stress created by the fall of system users, by reducing the impact force exerted on the end anchors. It is installed directly between the support head and the cable. To ensure product traceability, the Sicur Delta mark is engraved on both forks. STRETCHER with two welded forks with closed AISI 316 stainless steel pipe, which is necessary to adequately regulate the cable tension. It is installed directly between the support head and the cable clamping terminal. Both threaded pins include holes in which the warranty seal can be applied. To ensure product traceability, the Sicur Delta mark is engraved on it. CABLE CLAMPING TERMINAL with internal nose cap for ensuring a greater hold with respect to the traction-resistance of the cable itself. It is made of AISI 316 stainless steel. Considering that the technical product standard EN 795:2012 prohibits the use of U-shaped clamps, this system increases its hold while at the same time progressively increasing the traction exerted on the cable. It has been tested in laboratory, both on the whole system and with traction tests limited to the installed cable. WARRANTY SEAL, on which the system No. is indicated. It guarantees that the stretcher has not been used yet, and hence that the cable has not been disassembled and then re-assembled by unauthorised personnel. Whenever the system is inspected or serviced, replacement is followed by the registration of the new identification number, which certifies that system has been checked. IDENTIFICATION PLATE, which is necessary to indicate inspection and maintenance operations on permanent systems, as well as any relevant notes and system references.

Stainless steel elements Code

Description

SD001000

Safety line components kit

www.sicurdelta.it

Dimension

Horizontal flexible line Type C

EN 795:2012 CEN/TS 16415:2013 Type C

Installations: - DETACHABLE - PERMANENT

Sicur Delta Safety Line Flat The Flat range stands out for being versatile, for requiring only limited base space and for allowing clamping on vertical, horizontal and sloping surfaces, as well as for its limited visibility. In can be installed even on narrow structures, i.e. structures on which other standard devices could not be installed due to lack of space; it also allows for the installation of overhead systems, and can often ensure a 0 fall factor during operation.

www.sicurdelta.it

SYSTEM COMPOSITION DIAGRAM

ABSORBER STRETCHER

CABLE CLAMPING TERMIMAL

PAN MS U t XIM 0m MA 15.0

N SPA UM M I mt MIN 3.00

LL ERA

N SPA

.00

0 X 10 MA

mt DOUBLE RIB

INTERMEDIATE SUPPORT FOR RIB DOUBLE RIB

INTERMEDIATE SUPPORT FOR RIB

www.sicurdelta.net

Calculate the stress ratio on your line www.sicurdelta.it

Flexible horizontal line, Type C - FLAT ORDER COMPOSITION DIAGRAM

System for installation on vertical, horizontal and sloping surfaces.

It can also be installed on the intrados of fastening structures 52

www.sicurdelta.it

DOUBLE RIB SUPPORT Rectangular, 6 cm wide and 36 cm long base with the vertical anchor element welded in its centre. It is used as an end support for linear anchoring systems of type C; it does not require the installation of any head element. The symmetry with respect to its minor axis was chosen because in very large workplaces, where devices have a length exceeding 100 m, it is possible to terminate the line on one end of the support and to start with a new one from the other end.

Hop dip galvanised S235 supports Code

Description

Dimension

SD00910Z

Double Rib

Universal

INTERMEDIATE SUPPORT FOR RIB

It is used as an intermediate support for linear anchoring systems of type C; it is provided with a pre-installed head element. As a support belonging to the Flat range, it is suitable for installations on vertical, sloping and horizontal surfaces, and can be fastened on the structure intrados.

Hop dip galvanised S235 supports Code

Description

Dimension

SD00920Z

Intermediate for rib

Universal

www.sicurdelta.it

Flexible horizontal line, Type C - FLAT CABLE FOR LINEAR ANCHORING DEVICES

STAINLESS STEEL

SD00700A

Description

Cable by linear metre with one crimped end

www.sicurdelta.it to access technical data sheets and product certifications

www.sicurdelta.it

Dimension

By the metre

COMPONENTS FOR FLEXIBLE HORIZONTAL SAFETY LINE OF TYPE C STAINLESS STEEL

Single packaging that includes the elements needed to realise the flexible horizontal safety line of TYPE C, in accordance with the technical standard of reference as well as laboratory tests. Components: Heliciform ENERGY ABSORBER made of AISI 302 stainless steel. It has the function of absorbing the stress created by the fall of system users, by reducing the impact force exerted on the end anchors. It is installed directly between the support head and the cable. To ensure product traceability, the Sicur Delta mark is imprinted on both forks. STRETCHER with two welded forks with closed AISI 316 stainless steel tensioner, which is necessary to adequately regulate the cable tension. It is installed directly between the support head and the cable clamping terminal. Both threaded pins include holes in which the warranty seal can be applied. To ensure product traceability, the Sicur Delta mark is engraved on it. CABLE CLAMPING TERMINAL with internal nose cap for ensuring a better hold compared to the traction-resistance of the cable itself. It is made of AISI 316 stainless steel. Considering that the technical product standard EN 795:2012 prohibits the use of U-shaped clamps, this system increases its hold while at the same time progressively increasing the traction exerted on the cable. It has been tested in laboratory, both on the whole system and with traction tests limited to the installed cable. WARRANTY SEAL, on which the system No. is indicated. It guarantees that the stretcher has not been used yet, and hence that the cable has not been disassembled and the reassembled by unauthorised personnel. Whenever the system is inspected or serviced, replacement is followed by the registration of the new identification number, which certifies that system has been checked. IDENTIFICATION PLATE, which is necessary to indicate inspection and maintenance operations on permanent systems, as well as any relevant notes and system references.

Stainless steel elements Code

Description

SD001000

Safety line components kit

www.sicurdelta.it

Dimension

SD76 point device Type A

EN 795:2012 CEN/TS 16415:2013 Type A

Installations: - DETACHABLE - PERMANENT

Point anchoring devices SD76

STAINLESS STEEL

www.sicurdelta.it

SD76 point device, Type A - SWIVELLING BY 360째 SWIVELLING KIT FOR INSTALLATION ON POLE SUPPORT ELEMENT Installations: - DETACHABLE - PERMANENT

As the swivelling kit is installed on the pole-type support, different settings of the point device are possible, using the various pole bases and heights available. This, in turn, makes it possible to satisfy the needs arising from the structural fastening support and from the "roof package". The system thus makes it possible to work on both even and sloping walkable surfaces, and to cover a 360째 area around the pole with utmost mobility, without having to steer the connector on the anchoring point while changing work direction. Head element that consists of a double plate with an inserted element, which revolves around a central pin and is equipped with anchoring point. The central hole is used for installing the pole-type support element, using the locking bolt provided with the latter.

360째

Stainless steel support Code

Description

Dimension

SD00100A

Swivelling head

Universal

Hop dip galvanised S235 support

SD00100Z

Swivelling head

Universal

FLAT POLE BASE This flat-base pole support element is used as a component for linear anchoring devices of type C, to which the head element must be mounted in order to realise a complete support. Base plate with plan dimensions of 15x25 cm; the tubular element is realised with a hollow profile with circular section (external diameter 76 mm). It is used for anchoring on structures with flat extrados, such as reinforced concrete kerbs and beams, wooden beams and steel supports. The base is fastened on the extrados of this suitable structure, with the tubular element lying vertically and upwards. Fastening is possible by means of guard plates of different forms, including the same size as the base in terms of dimensions, thickness and holes.

Code

Description

Dimension

SD76015A

Flat base pole

15cm

SD76035A

Flat base pole

35cm

SD76050A

Flat base pole

50cm

SD76060A

Flat base pole

60cm

Hop dip galvanised S235 supports

Code

Description

Dimension

SD76015Z

Flat base pole

15cm

SD76035Z

Flat base pole

35cm

SD76050Z

Flat base pole

50cm

SD76060Z

Flat base pole

60cm

www.sicurdelta.it

RIDGE POLE BASE This pole support element with a single slope of 16.7째 is used as a component for linear anchoring devices of type C, to which the head element must be mounted in order to realise a complete support. Base plate with plan dimensions of 24,5x24,5 cm; the tubular element is realised with a hollow profile with circular section (external diameter 76 mm). It is used for anchoring on structures with equalised extrados, such as reinforced concrete kerbs and beams, wooden beams and steel supports. It is mostly used on roof ridges. Stainless steel supports Code

Description

Dimension

SD76C35A

Ridge pole

35cm

SD76C50A

Ridge pole

50cm

SD76C60A

Ridge pole

60cm

Hop dip galvanised S235 supports Code

Description

Dimension

SD76C35Z

Ridge pole

35cm

SD76C50Z

Ridge pole

50cm

SD76C60Z

Ridge pole

60cm

Perfect for hipped roofs

PITCH POLE BASE This pole support element with a single slope of 16.7째 is used as a component for linear anchoring devices of type C, to which the head element must be mounted in order to realise a complete support. Base plate with plan dimensions of 15x25 cm; the tubular element is realised with a hollow profile with circular section (external diameter 76 mm). It is used for anchoring on sloping surfaces, such as reinforced concrete kerbs and beams, wooden beams and steel supports. Fastening is possible by means of guard plates of different forms, including the same size as the base in terms of dimensions, thickness and holes. Stainless steel supports Code

Description

Dimension

SD76F35A

Pitch pole

35cm

Hop dip galvanised S235 supports Code

SD76F35Z

Description

Dimension

Pitch pole

35cm

www.sicurdelta.it

SD76 point device, Type A - FIXED FLAT MARTE BASE Installations: - DETACHABLE - PERMANENT

Fully welded anchoring device, both between base and stem and between stem and eyebolt-type anchoring point, which prevents device components from detaching accidentally. It need not be assembled on site. It consists of a full tubular element available in different heights, with a 15 cm x 20 cm base plate. On top of the tubular element an eyebolt is mounted, which acts as an anchoring point. It allows you to operate in any direction around the device, with installations on vertical, horizontal and sloping surfaces. Stainless steel supports Code

360째

Description

Dimension

VK00500A

Marte

20cm

VK00510A

Marte

30cm

VK00540A

Marte

40cm

VK00550A

Marte

50cm

Hop dip galvanised S235 supports Code

Description

Dimension

VK00515Z

Marte

15cm

VK00500Z

Marte

20cm

VK00505Z

Marte

25cm

VK00510Z

Marte

30cm

VK00540Z

Marte

40cm

VK00550Z

Marte

50cm

RIDGE MARTE BASE

360째

Fully welded anchoring device, both between base and stem and between stem and eyebolt-type anchor point, which prevents device components from detaching accidentally. It need not be assembled on site. It consists of a full tubular element available in different heights, with a 15 cm x 20 cm base plate, with an incline of 16.7째 along its main axis. On top of the tubular element an eyebolt is mounted, which acts as an anchoring point. It allows you to operate in any direction around the device, with installations mainly on covering ridges and on divide ridges. AISI 304 supports Code

Description

Dimension

VK00512A

Marte for ridges

30cm

VK00542A

Marte for ridges

40cm

Hop dip galvanised S235 supports

Code

Description

Dimension

VK00512Z

Marte for ridges

30cm

VK00542Z

Marte for ridges

40cm

www.sicurdelta.it

Fastening through sleeve dowel

“Sleeve-type” dowel bar

Fastening through structural wood screws

Fastening beneath structural concrete

www.sicurdelta.it

SD76 point device, Type A - FIXED MERCURIO Installations: - DETACHABLE - PERMANENT

Small-size, single-component device with limited visibility. It can be used without assembling further components, and hence directly fastened onto the resistant structure. It is realised with a flat, chamfered profile and with a 3.5 cm wide, 12 cm long and 4 mm thick base. It has three Ă˜ 13 mm holes for connecting the support structure. It allows you to operate in any direction around the device, including the perpendicular axis with respect to the base, with installations on vertical, horizontal and sloping surfaces. It is used for fastening on reinforced concrete beams and kerbs, reinforced bases with suitable resistance and thickness, wooden beams and steel supports. Fastening is possible by means of guard plates of different sizes.

360Â°

Stainless steel supports Code

Description

Dimension

VK00780A

Mercurio

Universal

Code

Description

Dimension

VK00780Z

Mercurio

Universal

www.sicurdelta.it to access technical data sheets and product certifications

www.sicurdelta.it

Fastening on vertical surfaces

Fastening on the structure intrados

www.sicurdelta.it

SD76 point device, Type A - FIXED VEGA SLOPING SURFACES

Installations: - DETACHABLE - PERMANENT

Sturdy under-tile device, which, once the system is fully installed, is almost fully concealed, as only the anchor point remains visible. It is realised with a flat profile with an overall span of 48 cm; it is chamfered in such a way that it fits all types of tiles. The shortened 3.5 cm base has three Ø 13 mm holes for connecting the support structure; it can be installed without assembling further components, and hence directly fastened onto the resistant structure; alternatively, it can be assembled on the U-CLAMP SPACER, whose height must be the same as that of the insulating package, should this be available. It can withstand the stress transmitted along its major axis with the anchoring point oriented downstream on sloping surfaces; it is most suitable for covering ridges with tile topping. Being sturdy, when it is not exposed to forces exerted by a fall it does not allow for roof topping movements when the operator is connected to it; moreover, it ensures longlasting waterproofing, since its installation does not require drilling the roof. It is used for fastening on reinforced concrete beams and kerbs, reinforced bases with suitable resistance and thickness, wooden structures and steel supports. Stainless steel supports Code

Description

Dimension

SD00705A

Vega

Universal

Vega

Universal

Hop dip galvanised S235 supports

SD00705Z VEGA + U-CLAMP SPACER

TESTED GETESTET TOGETHER ZUSAMMEN Installation with assembly on U-clamp spacer to penetrate insulation packages. Connection fasteners included in the U-clamp

Installation with sleeve dowels together with U-clamp spacer “Sleeve-type” dowel

bar

www.sicurdelta.it

Installation with structural wood screws

Installation with sleeve dowel

“Sleeve-type” dowel

bar

www.sicurdelta.it

SD76 point device, Type A - ADJUSTABLE DIRECTION SINGLE LEAD Installations: - DETACHABLE - PERMANENT

360째

Highly versatile device, which allows for a wide range of possible installations; however, it is most commonly used as a flexible, under-tile device. It owns its tremendous success to the flexible lead, which results in major advantages in terms of waterproofing, as it reduces the heat loss ratio to a minimum; it can be laid easily with all roofing packages, in addition to being hardly visible. It consists of multiple components assembled by Sicur Delta, which thus makes available to the user a finished device ready to install. Thanks to the reduced dimensions of its fastening plate, it can be installed on various structural supports; moreover, its 2 slotted holes for direct connection to the support structure allow you to easily execute guard plate fastenings. It can withstand the stress transmitted along the two base axes, as well as perpendicularly to the latter; it is most suitable for ventilated roofing. As it allows you to point the anchoring point in different directions, as well as to move the steel lead, it make it easier to extend the position of the anchor from the structural installation point, which is often bound by pre-defined centre distances. It is used for fastening on reinforced concrete beams and kerbs, reinforced bases with suitable resistance and thickness, wooden structures and steel supports. Stainless steel supports

STAINLESS STEEL CABLE

Installations: - DETACHABLE - PERMANENT

360째

Code

Description

Dimension

SD00630A

Single Lead

65cm

Hop dip galvanised S235 supports

SD00630Z

Single Lead

65cm

Highly versatile device, which allows a wide range of possible installations; however, it is most commonly used as a flexible, under-tile device, as in this way a single installation allows for two different anchoring points oriented on different pitches: it is ideal for splitting on ridges and divide ridges. It owns its tremendous success to the flexible leads, which results in major advantages in terms of waterproofing, as it reduces the heat loss ratio to a minimum; it can be laid easily with all cover packages, in addition to being hardly visible. It consists of multiple components assembled by Sicur Delta, which thus makes available to the user a finished device ready to install. Thanks to the reduced dimensions of its fastening plate, it can be installed on various structural supports; moreover, its 2 slotted holes for direct connection to the support structure allow you to easily execute guard plate fastenings. It can withstand the stress transmitted along the two base axes, as well as perpendicularly to the latter; it is most suitable for ventilated roofing. As it allows you to point the anchoring point in different directions, as well as to move the steel leads, it makes it easier to extend the position of the anchoring point from the structural installation point, which is often bound by pre-defined centre distances. It is used for fastening on reinforced concrete beams and kerbs, reinforced bases with suitable resistance and thickness, wooden structures and steel supports. Stainless steel supports Code

SD00635A STAINLESS STEEL CABLE

Description

Dimension

Double Lead

65cm

Hop dip galvanised S235 supports

SD00635Z www.sicurdelta.it

Double Lead

65cm

Installation with structural wood screws

Installation with sleeve dowel

â€œSleeve-typeâ€? dowel

bar

Installation beneath structural concrete together with base template

www.sicurdelta.it

ACCOMPANYING ACCESSORIES

PRODUCTION SICUR DELTA

www.sicurdelta.it

Accompanying accessories U-CLAMP SPACER Omega-shaped element designed to penetrate into the layers of thermal insulation installed in the roof or wall-mounted linings such as insulation coating; it works as an interface between the fastening on the resistant structure and the point anchoring device. The holes on the upper girder allow you to assemble the element with the Vega point anchor, with which it has been tested as a unidirectional point anchoring device of type A. Each Vega device ordered (code SD00705Z/A) is delivered with the relevant connection fasteners for installation. The holes are also compatible with the installation of Mercurio and Cavetto point devices, whereby their installation requires a sub-structure that should work as a gauge. Stainless steel supports Dimension

Code

Description

SD00804A

U-Clamp Spacer

4 cm

SD00805A

U-Clamp Spacer

5 cm

SD00806A

U-Clamp Spacer

6 cm

SD00808A

U-Clamp Spacer

8 cm

SD00810A

U-Clamp Spacer

10 cm

SD00812A

U-Clamp Spacer

12 cm

SD00815A

U-Clamp Spacer

15 cm

Hop dip galvanised S235 supports Code

Description

Dimension

SD00804Z

U-Clamp Spacer

4 cm

SD00805Z

U-Clamp Spacer

5 cm

SD00806Z

U-Clamp Spacer

6 cm

SD00808Z

U-Clamp Spacer

8 cm

SD00810Z

U-Clamp Spacer

10 cm

SD00812Z

U-Clamp Spacer

12 cm

SD00815Z

U-Clamp Spacer

15 cm

LINE BLOCK This accessory for linear anchoring devices of type C, which has to be installed on the cable, helps demarcate dangerous areas where connection is prohibited, such as areas close to the roof edges. It consists of an oval steel plate featuring a rear-mounted, protruding flap with double punching, which allows you to fasten the device on the cable, thanks to the two cable clamps provided with the accessory. Stainless steel element

Code

Description

Dimension

SL00752A

Block

Universal

www.sicurdelta.it

RING-TYPE CONNECTION FOR GALVANISED POLE Optional element for waterproofing of structural end and intermediate anchors, galvanised pole type. The tubular element, whose size is adjustable by means of a cut executed on site, fits tightly around the pole-type device, thus ensuring tightness: the aluminium cover of the pole, which is already available on each galvanised pole, tops off the system; the water that flows over it will be conveyed directly above the roof topping or in continuity with the insulation. Thanks to its aluminium hinge, whose interior is made of butyl-based, highly adhesive glue, it is perfectly suitable for sealing roof connections, while ensuring a long service life thanks to its UV ray- and weather-resistance properties. Thanks to the special crimp of the aluminium hinge, the whole surface can be extended by 60% in the unrolling direction, which makes it easier to install compared to traditional products. Ready-to-use, quick-action accessory, as it adheres easily to the roof topping.

Code

SD0100CZ

Description

Butyl-based connection for galvanised pole

RING-TYPE CONNECTION FOR STAINLESS STEEL POLE Optional element for waterproofing of stainless steel pole elements. The tubular element, whose size is adjustable by means of a cut executed on site, fits tightly around the pole-type device, thus ensuring tightness: in addition to the connection, an aluminium cover of the pole is provided to complete the system; the water that flows over it will be conveyed directly above the roof topping or in continuity with the insulation. Thanks to its aluminium hinge, whose interior is made of butyl-based, highly adhesive glue, it is perfectly suitable for sealing roof connections, while ensuring a long service life thanks to its UV ray- and weather-resistance properties. Thanks to the special crimp of the aluminium hinge, the whole surface can be extended by 60% in the unrolling direction, which makes it easier to install compared to traditional products. Ready-to-use, quickaction accessory, as it adheres easily to the roof topping. Code

SD0100CA

Description

Butyl-based connection for stainless steel pole

POLE COVER BOWL Aluminium bowl, optional element that completes end and intermediate, pole-type structural anchors. When this element is fitted on top of the pole, rain is safely drained and kept away from the pole base, thereby reducing the risk of seepage while keeping the support structure intact.

Code

Description

SD01000L

Pole covering bowl

www.sicurdelta.it

Accompanying accessories GUARD PLATES Special guard plates are available for: Flat base pole, ridge base pole, vertical plate, double rib, Marte, U-clamp spacer and wall ladder hook. The same guard plates can be adjusted for use with other devices such as Mercurio, Vega and Cavetto, both by retaining the standard punching, and by executing new holes, which can be drilled depending on the customer's specific requests. It is possible to realise tailor-made guard plates. Stainless steel supports Code

Description

Compatibility

SL00966A

Plate 150x250x10

Flat pole or ridge

SL00966Z

Plate 150x250x10

Flat pole or ridge

SL00962Z

Plate 375x60x10

SL00964Z

Plate 150x200x6

SL00958Z

Plate 350x170x5

Double rib

Vertical plate, Marte, Mercurio, Cavetto U-Clamp Spacer, wall ladder hook

TEMPLATE WITH S235 STEEL ANCHOR PINS Template with anchor pins to be submerged prior to concrete filling, and to which the following items can be bolted: Flat base poles, ridge base poles. S 235 steel plate, placed symmetrically to the flat base pole and ridge base pole with a base of 25 cm x 15 cm, a thickness of 5 mm and 4 anchor pins Ă˜14 B450C (overall span 30 cm). When it is used in new buildings, the plate can be fitted into the reinforcement, in such a way that the concrete surface is flush with the upper part of the beam. The parts of the protruding anchor pins will be used to realise the joint with the lower pole plates. When it is possible to realise elements in reinforced concrete, such as beams and kerbs, this accessory makes it easier to install safety devices.

Code

Description

Dimension

SD00940Z

Template with anchor pins

Universal

TEMPLATE FOR REINFORCED BASES Template with anchor pins to be submerged prior to concrete filling, and to which the following items can be bolted: Single lead, double lead, Vega. Plate with a 18 cm x 14 cm, 5 mm thick base in S 235 steel and equipped with two threaded bars M12 cl. 8.8, with a length of 11 cm, welded together so as to constitute a single element. It is used as an insert into the reinforcement and must be adequately doubled and crossed before suitably thick and resistant reinforced concrete bases are realised. After filling, the threaded bars are in a vertical position, so that additional devices can be bolted onto them. It is already equipped with double washer and double bolt for clamping the accompanying device.

Code

Description

Dimension

SD00946Z

Template for reinforced bases

Universal

www.sicurdelta.it

SHELF TEMPLATE FOR VERTICAL WALLS

Sub-structure for anchoring flat base poles, which acts as an interface for fastening them on suitable vertical surfaces. It can be fastened onto the structure sides without requiring drilling the roof topping. Hop dip galvanised S235 supports Code

Description

Dimension

SD00941Z

Shelf template

Universal

LADDER HOOK FOR EAVES The code includes the pair of elements. Single-body, 8 mm thick, chamfered system for fastening portable EN131 ladders used to access work areas. Once the ladder that rests on the floor is suitably fastened, no tilting or oscillating motion is possible. As the two elements are detached from each other, it is possible to install them at the desired distance, depending on the width of the ladder to be fastened. Thanks to its design, it can be installed on eaves, as it is both sloping and elongated in order to reach past the drain spout. Stainless steel supports Code

Description

SL00755A

Ladder hook for eaves

Dimension

Universal

Hop dip galvanised S235 supports

SL00755Z

Ladder hook for eaves

Universal

LADDER HOOK FOR WALLS The code includes the pair of elements. Single-body, 8 mm thick, chamfered system used to fasten portable EN131 ladders used to access work areas. Once the ladder that rests on the floor is suitably fastened, no tilting or oscillating motion is possible. As the two elements are detached from each other, it is possible to install them at the desired distance, depending on the width of the ladder to be fastened. Its design makes it suitable for installation on vertical surfaces.

Stainless steel supports Code

Description

Dimension

SL00754A

Ladder hook for walls

Universal

Hop dip galvanised S235 supports

SL00754Z

Ladder hook for walls www.sicurdelta.it

Universal 73

www.sicurdelta.it

Sicur Delta S.r.l.

Via C.Colombo, 4 - 56029 - Santa Croce sullâ€™Arno (PI) Tel. +39 0571 33588 Tel. +39 0571 367677 Fax +39 0571 367599 Share Cap. Euro 115,000.00 fully paid up Fisc. Code and Vat. No. 05738810489 Pisa Reg. of Companies Reg. No. 05738810489 N. R.E.A. PI - 158714 info@sicurdelta.it www.sicurdelta.it