Grizzly Industrial Router Bit, Shaper Cutter, and Circular Saw Blade Catalog

SHAPER

No-Drip Edge with Guide Bearing

Roman Ogee with Guide Bearing

Ogee design is a classic and looks good on just about anything made of wood. A MUST for architectural millwork. Can be used for pattern work.

We offer one of the largest selections of industrial-grade carbide-tipped router bits you can find.

Engineered with top-grade carbide for unmatched edge retention, each bit is honed to perfection with diamond wheels as fine as 600-grit. Built to last, we use hightensile, silver-based brazing for ultimate durability. If you haven't tried these bits put them to the test. Whatever your routing or shaping needs are, we have you covered, with the high quality your work demands.

Double Roundover with Guide Bearing

Roundover with Guide Bearing

Stepped Ogee with Guide Bearing

Roman Ogee & Round Nose Bit with Guide Bearing

8 "

8 " 1⁄2" $1495

C1720* 3⁄4" 3 8 "

1⁄8" $1295

C1721* 7 8 " 3 8 " 21⁄4" 3⁄16" $1395

C1183 7 8 " 3 8 " 21⁄4" 3⁄16" $1195

C1722* 1" 1⁄2" 21⁄4" 1⁄4" $1395

C1184 1" 1⁄2" 21⁄4" 1⁄4" $1195

Straight Bits

Double Flute

Used for cutting dadoes, rabbets, circles, and other generalpurpose routing. Can be used in solid wood, plywood, certain plastics, and laminated material. Use the shortest length (B) for work to be done.

Straight Bits Single Flute

Single-fluted cutters offer more backing behind the carbide and are great for plunging.

WARNING! †1

Straight Bits Shear Cut

Shearing action provides for smoother cuts and better chip clearance. For use in hand held routers only.

Angled cutting edge for shearing action

†1

C1019

WARNING! †1

Straight Bits

Extended Shank

Extended shank lengths make these bits ideal for use with box finger-joint jigs.

Bottom Cleaning

Used to clean out and smooth pre-cut dadoes, inlays, and shallow mortises.

WARNING! †1

WARNING! †1 WARNING!

WARNING! †1

1/2" Dovetail Pattern Bit with Guide Bearing

For use with template on top of workpiece. Works well for sliding dovetails.

WARNING! †1

Rabbeting Bits with Guide Bearing

Used for all types of rabbeting and slotting. Ideal for insetting glass, wood, or plastic panels into frames. Great for making windows and picture frames. These are two-wing cutters. Use C1040 for “T” moulding and C1042 for No. “0” biscuit joining.

WARNING! †1

Dovetail Jig Bits

These bits are specially made for use in dovetail fixtures and jigs. They have an extended shank length and a high rake angle for smooth, fast routing in all types of wood and wood composite material.

WARNING!

Dovetail Bits

Used in the production of dovetail joints for drawers and fine furniture. Suitable for routing wood, laminates, plywood, and composition paneling.

*Replacement for Incra-Jig™ Set.

**Special Tool Steel

C1049

WARNING! †1

Slotting Bits

Four Flutes w/ Guide Bearing

For grooving, rabbeting, and slotting. Use C1098 or C1102 for No. 10 or 20 biscuit joining.

WARNING! †1

WARNING! †1

T-Slot Bit

This T-Slot cutter is designed for use in creating slot wall panels for commercial display units using hanging brackets.

C1767*

Angled cutting edge

Pattern Cutting Bits with Upper Guide Bearing

These are used when cutting duplicate models from a pattern. Bearing above cutter makes it easy to use. If you want to rout fast, you need one of these!

Flush and Bevel Trimming Bits Three Flutes with Lower Guide Bearing

Flute Bits with Upper and Lower Guide Bearings

Shear Cut Flush Trim Bits with Lower Guide Bearing

Shearing action provides smooth face finishing. No lifting of laminate and less taxing on router.

Flush Trimming Bits with Lower Guide Bearing

Order G3846 replacement bearing for C1079.

Order G3855 replacement bearing for C1080.

Order G3855 replacement bearing for C1082.

Order G3848 replacement bearing for C1083.

45° Chamfer Bits with Lower Guide Bearing

High shear angle gives a clean, smooth cut. Can be used for pattern work and moulding.

90° V-Groove Bits

Large selection for grooving in various widths and depths. Used in paneling and general profiling in solid wood, composites, and vinyl covered material.

Insert Finger Pull Bits

These bits are used to make drawer pulls and hand holds.

Keyhole Bits

Single Flute

Used for mounting clocks, pictures, and other hanging items. Also used for T-slots.

Door Lip Bits

C1332

C1333

Flush Trimming V-Notch Bit with Lower Guide Bearing

Bevel Trimming Bit

90° V-Groove Pattern Bit with Lower Guide Bearing

For use with template on top of workpiece. Great for veining V-grooves.

3-Pc. Sign Making Set

These router bits have a long reach and a sheer design for smoother cuts, making them excellent for use with signmaking templates.

Comes with 1⁄4", 3⁄8", and 1⁄2" sizes.

Solid Carbide Straight Bits

Laminate Flush Trimming Bit Two Flutes with Lower Guide Bearing

Order G3845 replacement bearing.

Solid Carbide Spiral Downcut Bit

Stile & Rail Set—Quarter Bead 2 Flutes

A more traditional version of the popular Quarter Round design. Scaled for 3⁄4" to 1" thick door frames. A 3 HP router is advised for use with this set.

Stile & Rail Set—Classical 2 Flutes

Comes with bearing guides. A template must be used for shaping irregular stock. Classic Greco-Roman styling makes this two-piece Stile and Rail Set an outstanding choice for traditional raised panel designs.

Order G3845 replacement bearing.

Stile & Rail Set—Roman Ogee 2 Flutes

Another classic design, influenced by the Romanesque architectural style. For 3 4" to 1" thick door frames. We recommend using a 3 HP router with these bits.

Order G3845 replacement bearing.

Stile & Rail Set—Ogee 2 Flutes

Prominent in Gothic architecture, the smooth flowing lines of the Ogee makes it ideal for a wide range of cabinet styles. For 3⁄4" to 1" thick door frames. A 3 HP router is recommended.

Cut stiles and rails without rearranging the bit—just flip the workpiece over and re-set the cutting height. Designed for 3⁄4" material. shank.

C1689

Order G3845 replacement bearing.

Order G3845 replacement bearing.

Order G3845 replacement bearing.

One-Piece Stile and Rail Sets with Guide Bearing Replacement Bearings for Router Bits

Stile & Rail Set—Quarter Round 2 Flutes

A favorite for contemporary styled cabinetry, this Stile and Rail set is perfect for 3⁄4" to 1" thick door frames. A 3 HP router is recommended for use with these bearing-guided bits.

Order G3845 replacement bearing.

3⁄8"

3⁄4"–7⁄8" 1⁄4" 3⁄8"

3⁄4"–7⁄8" 1⁄4"

7⁄16"

Reversible Tongue & Groove

Used for making butt joints in flooring and other similar products. Large surface area of joint ensures a tight fit. For 3 4" material.

Tongue

•

•

•

Reversible Stile & Rail—Ogee with Guide Bearing

Tongue & Groove Set - Wedge

Tongue and groove bits provide an excellent aid in strengthening glued and non-glued edge joints. For most 5⁄8" to 7⁄8" material.

Reversible

Tongue

Reversible

Reversible

Core Box Bits

The upshear angle lifts chips up to give a smooth cut with no burning.

Finger Joint Bit with

Guide Bearing

Adjustable Finger Joint Bit with Guide Bearing

Core Box Pattern Bit with Guide Bearing

For use when template is on top of workpiece. Makes fluted moulding.

Drawer Lock Bit

Can also be used to create glue joints. Ideal for 1⁄2" stock.

Used for end-to-end jointing. Provides a super strong joint. For 3 ⁄ 4" material.

Order G3845 replacement bearing.

Hinge Mortising Bits

Used to make mortise pockets to accept hinges, stringers, and edge boards. Smooth cut.

1⁄4" SHANK

Glue Joint Bits

This bit is ideal for laminating and jointing stock together for use in table tops, panels, and where extra-wide stock is needed. For 3 ⁄ 4" to 1" material.

For 7⁄16" to 13⁄8" stock.

Corner Lock Miter Bits

Bull Nose Bits

Used for full beading and rounding edges, particularly for casement and staircase work. Also used for moulding and picture frames or anywhere a round profile is needed. Especially attractive on countertops.

• Use C1023 & C1028 to make wooden hinges

Beading Bits with Guide Bearing

The quarter bead can be used on drawer fronts, moulding, chair rails—anywhere a special look is needed. High hook angle works well on end grain stock and can be used for pattern work.

Edge Beading Bits—Style 1 with Guide Bearing

Order G3848 replacement bearing.

Edge Beading Bits—Style 2 with Guide Bearing

Order G3855 replacement bearing.

Corner Beading Bits with Guide Bearing

NOTE: Profile shown requires 2 passes.

Replacement bearings: G3855 for 1⁄4" shank bits; G3857 for 1⁄2" shank bits.

Multiple Beading Bit with Two Guide Bearings

Makes attractive beaded moulding in single or multiple passes.

Order G3852 replacement bearings.

Edge Beading Bits—Style 3 with Guide Bearing

Order G3855 replacement bearing.

Dish Cutter Bits

Will plunge to provide smooth sides and bottom with radiused corners.

Radius Bits

Used for round bottom finishing and as a drawer pull. Use a template or guide when fluting.

Round Bottom Pattern Bit with Guide Bearing

For plunge routing when the template is placed on top of the workpiece.

r1 r2

Roundnose Bits B

Flat Bottom Pattern Bit with Guide Bearing

For plunge routing when the template is placed on top of the workpiece.

C

Ogee Plunge Bits

Cove Bits with Guide Bearing

Order G3855 replacement bearing.

Fingernail Bits Half Radius

Puts a nice smooth profile on tables, countertops, and wherever a curved edge is needed. Great for tops of drawer sides.

Picture Frame Bits with Guide Bearing

More than 1" of decorative cutting surface makes these carbide bits perfect for picture frames, mirrors or furniture trim.

Order G3855 replacement bearing.

Internal Half Round Bits with Guide Bearing

Used for fluting and grooving. Can be used on irregular-shaped pieces as well.

Flute and Bead Bits for Small Boat Blanking

Order G3855 replacement bearing.

Combination Panel Bits

Used in the construction trades to rout cutouts in floors, ceilings, panels for electrical boxes, windows, etc.

Under Roundover Bit with Guide Bearing

Used to profile the underside of solid surface countertop edges. Eliminates the need to flip cumbersome and heavy countertops and allows the router base to be well supported by the countertop.

Excellent for CORIAN® and other solid surface materials.

Ogee Bowl Bit with Guide Bearing

Excellent for CORIAN® and other solid surface materials.

15° Bowl Edge Bit with Guide Bearing

Excellent for CORIAN® and other solid surface materials.

Order G3845 replacement bearing.

Bead/Classical Bit with Guide Bearing

10° Bevel Bowl Bit with Guide Bearing

Excellent for CORIAN ® and other solid surface materials.

Inlay Bits with Guide Bearing

Excellent for CORIAN ® and other solid surface materials. Order G3845 replacement bearing. Order G3845 replacement bearing.

Face Moulding Bit with Guide Bearing

Face Moulding Bit with Guide Bearing

Multi-Form Bit

Classical Bits with Guide Bearing

Classical Bits with Guide Bearing

Classical Bits with Guide Bearing

Classical Palace Bits

Classical Bits with Guide Bearing

Classical Plunging Bits

Beading/Roundover Bits

Plunging Ogee Bits

90° V-Groove Bits (Female) with Guide Bearing

Plunging Quarter Bead Bits

Plunging Roundover Bits

For use with a router table.

90° V-Groove Bits (Male) with Guide Bearing

Plunging Bead Bits

5° Face Cut Bit with Guide Bearing

For use with a router table.

12° Face and Quarter Round Bit with Guide Bearing

For use with a router table.

Convex Bit with Guide Bearing

For use with a router table.

Ogee Bit with Guide Bearing

For use with a router table.

Order G3855 replacement bearing.

5° Face Cut Bit with Guide Bearing

For use with a router table.

Order G3854 replacement bearing.

Convex Bit with Guide Bearing

For use with a router table.

5° Face Cut Bit with Guide Bearing

15° Face Cut Bit with Guide Bearing

For use with a router table.

Order G3855 replacement bearing.

12° Face and Quarter Round Bit with Guide Bearing

For use with a router table.

Order G3854 replacement bearing.

15° Face Cut Bit with Guide Bearing

For use with a router table.

Ogee Bit with Guide Bearing

Ogee Bit with Guide Bearing

For use with a router table.

A

Order G3854 replacement bearing.

15° Face Cut Bit with Guide Bearing

For use with a router table.

Order G3854 replacement bearing.

12° Face and Quarter Round with Guide Bearing

For use with a router table.

Convex Bit with Guide Bearing

For use with a router table.

For use with a router table.

For use with a router table.

Crown Moulding Bit

Crown Moulding Bit

Cove Moulding Bits

This assortment of Cove Moulding router bits gives you the ability to mill your own full-scale trim with your router.

Crown Moulding Bit

Crown Moulding Bit

Crown Moulding Bit

Crown Moulding Bit

Window Sash Sets Bead with Guide Bearing

Window Sash Sets Ogee with Guide Bearing C1551 C1554

Finger Grip with Guide Bearing

Use with either C1535 or C1580 for top of handrail

Multiform Bit with Guide Bearing

•

•

•

•

Handrail Bit Sets

Order G3855 replacement bearing for C1535.

Order G3848 replacement bearing for C1536

30-Pc. Carbide-Tipped Router Bit Set

1⁄4" Shank

This comprehensive 30-piece carbide-tipped router bit set is perfect for both novice woodworkers building up their collection and seasoned pros needing to replace worn out bits. It includes all the essential bits you'll need for dovetailing, panel piloting, and intricate detail work.

Without Guide Bearings:

• 1 4", 3 ⁄ 8 ", 1 ⁄ 2 ", 3 ⁄ 4" Straight

• 3 ⁄ 32 " Classical

• 1 2 " Core round box

• 3 ⁄ 8 ", 1 ⁄ 2 "

• 1 4"

• 1 4"

• 1 4"

Guide Bearings:

• 1 2 " Flush trim

• 1 4" Radius cove

• 1" 45° Chamfer

• 7 ⁄ 8 " Rabbet

• 5 ⁄ 32 ", 1 4" Roman ogee

• 3 8 ", 1 2 " Radius cove

• 3 16" Radius ogee

• 3 16" Radius ogee with fillet

• 3 16" Radius classic ogee

• 1 8 ", 1 4", 3 8 ", 1 ⁄ 2 " Radius roundover

These bits are a must if your job calls for curved handrails or custom handrail fittings. They may also be used separately to create decorative mouldings and trim. Mix and match bits for the look you want! Designed for use with a 3 HP router.

Order G3848 replacement bearing.

C1535

C1536

C1580

C1581

Deluxe Rabbeting Set #1

1⁄4" Shank

Includes a 7 ⁄ 8 " diameter x 5 8 " cutting length rabbeting bit with all the bushings and bearings needed vor a variety of rabbets, as well as flush cutting operations.

Cutting capabilities:

• Flush cutting

• 1 16" Rabbet

• 1 8" Rabbet

• 3⁄16" Rabbet

• 1 4" Rabbet

Custom Moulding Set

Make beautiful custom moulding with this 4-piece set: C1383 Face Mould, C1390 Multi Form, C1524 Crown Mould, and C1528 Cove Mould. Comes with a wooden storage box.

Inlay Kit with Carbide Bit

Cut perfect inlays using this Inlay Kit and your shopmade template. Includes a 1 8 " solid carbide spiral cutter and alignment pin. Fits Porter Cable® routers and other routers with template guide adapters.

Deluxe Rabbeting Set #2 1⁄2" Shank

Includes a 11⁄8" diameter x 3 4" cutting length rabbeting bit with all the bushings and bearings needed vor a variety of rabbets, as well as flush cutting operations.

Cutting capabilities:

• Flush cutting

• 1⁄8" Rabbet

• 3⁄16" Rabbet

• 1⁄4" Rabbet

• 5⁄16" Rabbet

• 3⁄8" Rabbet

1⁄2" Shank

Classical Bit Set

Set includes one of each: C1292 3 4" Classical, C1302 7 8 " Classical, C1424 Roman Ogee/Round Nose, and C1655 Classical Plunging. Complete with wooden box.

Rabbeting Kits

Includes Grizzly ® carbide rabbeting bit, bearings in 3 ⁄ 8 ", 1 ⁄ 2 ", 5 ⁄ 8 ", and 3 ⁄ 4", hex key, and Allen ® screw. Makes rabbets 7 ⁄ 16", 3 ⁄ 8 ", 5 16", and 1 4" wide.

Deluxe Rabbeting Set #4 1⁄2" Shank

Includes a 13⁄8" diameter x 3⁄4" cutting length rabbeting bit with all the bushings and bearings needed vor a variety of rabbets, as well as flush cutting operations.

Cutting capabilities:

• Flush cutting

• 1⁄8" Rabbet

• 1⁄4" Rabbet

• 5 16" Rabbet

• 3 8" Rabbet

• 7⁄16" Rabbet

• 1⁄2" Rabbet

3-Pc. Straight Flush Trim Sets

H5566 (1⁄4" Shank):

• 1⁄2" x 13⁄16" w/ bottom bearing

• 1⁄2" x 3⁄4" w/ top bearing

• 5 8" x 3⁄4" w/top bearing

• Wooden storage box

H5567 (1⁄2" Shank):

• 1⁄2" x 13⁄16" w/ bottom bearing

• 3 4" x 1" w/ top bearing

• 11⁄8" x 11 8" w/ top bearing

• Wooden storage box

Router Bit Sets for the Incra® Jig

Carbide-tipped router bit set made for use with the Incra Jig templates. Includes a wooden storage box.

SET #1 (1⁄4" Shank)—Made for smaller joints. Set includes: 1 4" Straight, 3 8" Straight, 1 4" Dovetail (7°), 3⁄8" Dovetail (8°), and 1⁄2" Dovetail (14°).

Note: Due to the extremely small surface on the 1⁄4" Dovetail bit, it is made of special tool steel and is not carbide-tipped.

SET #2 (1⁄2" Shank)—Made for larger joints. Set includes: 5⁄16" Straight, 3⁄8" Straight, 1⁄2" Dovetail (14°), 5⁄8" Dovetail (7°), and 3⁄4" Dovetail (7°).

Shank

H5557

3-Pc. Straight Bit Sets for Plywood

Make dadoes fit better with these straight bits sized for modern plywood. Includes a wood box and the following sizes: 7 ⁄ 32 ", 15 32 ", and 23 ⁄ 32 ".

WARNING! †1

H5558 1⁄4" Shank Only $1095

H5559 1⁄2" Shank Only $1395

5-Pc. Straight Bit Sets

Each set includes a wood box and the following sizes: 1 ⁄ 4", 3 5 ⁄ 8 ", and 3 4

WARNING! †1

H5535 1⁄4" Shank Only $1695

H5536 1⁄2" Shank Only $1695

8-Pc. 1⁄4" Straight Bit Set

This complete set includes a wooden box and the following sizes: 1 ⁄ 8 ", 1 ⁄ 4", 13 32 ", 1 2 ", 19 32 ", (2) 27 ⁄ 32 ", and 15 ⁄ 16". 1 4" Shank.

WARNING! †1

H5532 1⁄4" Shank Only $2795

4-Pc. Roundover Bit Sets

1⁄2" Shank with Guide Bearing

Anti-Kickback

The most popular roundover sizes in one set. Radius sizes: 1⁄8", 1⁄4", and 1⁄2". Complete with wooden box.

WARNING! †1

H3430 1⁄2" Shank Only $3595

6-Pc. Router Bit Sets

• 1⁄8", 1⁄4", 3 8", 1⁄2" Radius shear cut roundover bits

• 1⁄4", 3⁄8" Flush trimming bits

• Includes wooden box

WARNING! †1

H3427 1 4" Shank Only $2995 H3428 1 2" Shank Only $2995

10-Pc. 1⁄4" Triple-Flute Bit Set

5-Pc. Edge Forming Set

1⁄4" Shank with Guide Bearing

• 1 2" Flush trim

• 3⁄8" Rad. roundover

• 5⁄32" Rad. Roman ogee

• 45° Chamfer

• 3⁄8" Rabbet

• Includes wooden box

WARNING! †1

H5538 1 4" Shank Only $2595

6-Pc. Roundover Bit Sets with Guide Bearing

Anti-Kickback

A complete set of carbide, double-fluted roundover bits with the following radius sizes: 1 8 ", 3 16", 1 ⁄ 4", 5 16", 3 8 ", and 1 ⁄ 2 ". All sizes have a 3 ⁄ 8 " guide bearing.

WARNING! †1

H5543 1⁄4" Shank Only $3895

H5572 1⁄2" Shank Only $3895

Smooth cutting 3-flute, carbide-tipped router bits provide up to 75,000 cuts per minute in 10 different profiles.

• 15° Laminate trim bit

• 25° Laminate trim bit

• 30° Bevel trim bit

• 3⁄8" x 3 8" Rabbeting bit

• 3⁄8" x 1⁄2" Rabbeting bit

• 45° Chamfer bit

• 1 2" Radius cove bit

• Classical bit

• 1 4" Radius Roman ogee

• 1 2" Roundover

WARNING! †1

H6157 1 4" Shank Only $9895

2-Pc. Classical Panel Bit Set

Set includes a reversible classical stile and rail bit and ogee panel bit for making raised panel cabinet doors.

3-Pc. Quarter Bead Panel Bit Set

Matching quarter bead stile & rail bits and ogee raised panel bit are boxed in one convenient set for making cabinet doors.

3-Pc. Roman Ogee Panel Bit Set

Includes 2-piece Roman ogee stile & rail bits and ogee panel bit for raised panel cabinet doors.

12-Pc. 1⁄2" Shank Router Bit Set

This is the pefect set if you're just starting out with a new router bit collection. Includes an attractive wooden storage case.

• 1 4", 1⁄2" & 3⁄4" Straight

• 1 2" 14° Dovetail

• 1 4" Radius Roman ogee

• 3⁄8" Rabbeting

• 1 2" Rad. cove

• 1 2" 90° V-groove

• 1 2" 45° Chamfer

• 1 2" Flush trim

• 1 2" Core box

• 1 2" Radius roundover

2-Pc. Ogee Panel Bit Set with Undercutter

Includes reversible ogee stile & rail bit and convex panel bit with undercutter for consistent results.

3-Pc. Quarter Bead Panel Bit Set with Undercutter

This 3-piece set includes quarter bead stile & rail bits and a convex panel bit with undercutter.

3-Pc. Roman Ogee Panel Bit Set with Undercutter

This 3-piece set includes Roman ogee stile & rail bits and a convex panel bit with undercutter.

20-Pc. 1⁄4" Shank Router Bit Set

• 1⁄4", 3⁄8", 1 2", 3⁄4" Double fluted straight

• Combination panel cutter

• 1⁄4" Rabbeting

• 3 8" & 1 2" Dovetail

• 1⁄2" Flush trimming

• 45° Chamfer

• 3 8" Round Nose

• Roman ogee

• 3⁄8" Roundover

• 90° V-groove

• 3⁄4" Fingernail

• 3⁄8" Core box

• 1 2" Internal radius

• Classical plunge

• Keyhole

• Edge beading bit

H5561

1 2" Shank Only $5495

H5599 1 4" Shank Only $8295

H5552 1⁄2" Shank $7195

H5563 1⁄2" Shank $9995

H5551 1 2" Shank $11695

H5564 1 2" Shank $9995

H5553 1 2" Shank $8695

H5550 1⁄2" Shank $9995

20-Pc. 1⁄2" Router Bit Set

Anti-Kickback

An excellent combination of carbide-tipped 1 2 " shank router bits in one set for a great price. Includes wooden case.

• 5⁄32", 1⁄4" radius Roman ogee

• 1 4", 1⁄2", 3⁄4" Straight

• 45° Chamfer

• 1 4", 1⁄2" radius roundover

• 3⁄8" Rabbeting

• 3⁄8", 1⁄2" Dovetail

• 1 4", 1⁄2" radius cove

• 3⁄8", 1⁄2" Core box

• 1 2" Flush trim

• 1⁄4" Combination panel bit

• 5⁄8" 90° V-groove

• 3⁄8", 1⁄2" radius beading bits

WARNING! †1

66-Pc. Carbide-Tipped Router Bit Set

1⁄4" Shank

• (6) 1 ⁄4"–3 ⁄4" Straight bits—double flute

• (2) 1 ⁄ 2" & 5 ⁄ 8" Mortising bits—double flute

• (3) 1 4"–1 2" HSS straight bits—double flute

• (1) 1 8" HSS straight bit—single flute

• (1) 1 2" Pattern cutting bit

• (3) 3 ⁄ 8"–3 ⁄4" 90° V-groove bits

• (4) 3 8"–3 4" Core box bits

• (1) 1 2" Round nose bit

• (3) 3 ⁄ 8"–1 ⁄ 2" Dovetail bits

• (3) 3 ⁄ 8"–1 ⁄ 2" Flush trimming bits

• (3) Bevel trimming bits

• (2) 1 ⁄4" & 3 ⁄ 8" Combination panel bits

• (2) 1 ⁄ 8" & 3 ⁄ 8" Radius beading/roundover bits

• (2) 3 ⁄ 8" & 1 ⁄ 2" Keyhole/T-slot bits

• (1) Countersink bit

• (1) 1" Plunging ogee bit

• (1) 1" Glue joint bit

• (6) 1 ⁄ 8"–1 ⁄ 2" Radius roundover bits

• (2) 1" & 11 2" 45° Chamfer bits

• (4) 1 ⁄ 8"–1 ⁄ 2" Radius cove bits

• (2) 1 ⁄4" & 1 2" Rabbeting bits

• (1) 1 8" Radius corner beading bit

• (2) 13 ⁄ 32" & 1 2" Bull nose bits

• (4) Classical bits

• (2) 11 4" & 11 ⁄ 2" Ogee bits

• (2) 1 ⁄ 8" & 1 ⁄4" Radius Roman ogee bits

• (2) 1 ⁄4" & 3 ⁄ 8" Radius beading bits

WARNING! †2

H5542

35-Pc. Router Bit Set 1⁄4" Shank

• 1 4" x 1⁄2" single flute straight bit

• 1 4", 3⁄8", 1⁄2", 3⁄4" straight bits

• 3 8", 1⁄2" dovetail bits

• 1 2" x 3 8", 1⁄2" x 5⁄8", 5⁄8" x 1 2", 3 4" x 1⁄2" core box bits

• 1 4" radius roundover plunge bit

• 1 2" hinge mortising bit

• 3 8", 1⁄2", 5⁄8" V-groove bits

• 3 8" x 1 2", 1⁄2" x 1 2" & 1⁄2" x 1" straight flush trimming bits

• 5 32" radius Roman ogee bit

• 1 8", 1 4", 5 16", 3⁄8" & 1 2" radius roundover bits

• 3 8", 1⁄2" 45° chamfer bits

• 1⁄4", 1 2" radius cove bits

• 3 8" radius beaded cove

• 1⁄8", 1 4" radius classical bits

• 3 8" x 1⁄2" rabbeting bit

• Classical ogee bit

• Keyhole bit

• Aluminum case

WARNING! †1

Only $ 34800

H5555 1 2" Shank

Only $9995

H6159

Only $18700

Router bits tipped with micro-grain carbide offer superior results over standard carbide-tipped router bits. Our micro-grain bits are sharpened to over 600 grit fineness and are razor sharp! This results in smoother, cleaner cuts with minimal tear-out even in highly figured woods.

Roman Ogee Bits with Guide Bearing

Cutting edge is angled

Anti-Kickback r

B

Order G3855 replacement bearing.

Ogee Bit with Guide Bearing

Cutting edge is angled

Order G3855 replacement bearing.

B C A

Ogee Bit with Guide Bearing

For use with a router table.

W

W B C A

Order G3855 replacement bearing.

Flute and Bead Bits

C A B B C A

Cove Bit with Guide Bearing

1 4" SHANK MODEL CUTTER DIA. A CUTTING HEIGHT B OVERALL LENGTH C PRICE C1378Z 11⁄2" 1 4 " 13⁄4" $3795 C1379Z 11⁄2" 1 2 " 13⁄4" $3795 1⁄2" SHANK MODEL CUTTER DIA. A CUTTING HEIGHT B OVERALL LENGTH C CUTTING WIDTH W PRICE C1401Z 25⁄8" 9⁄16" 21⁄4" 11 16 " $4295 1⁄2" SHANK MODEL CUTTER DIA. A CUTTING HEIGHT B OVERALL LENGTH C CUTTING WIDTH W PRICE C1426Z 2" 1" 23⁄4" 3⁄4" $4695 1⁄4" SHANK MODEL CUTTER DIA. A CUTTING HEIGHT B OVERALL LENGTH C RADIUS r PRICE C1744Z 11⁄8" 1⁄2" 21⁄16" 5⁄32" $2595 C1745Z 11⁄2" 3⁄4" 21⁄4" 1 4 " $2795

Crown Moulding Bit

SHANK MODEL CUTTER DIA. A CUTTING HEIGHT B OVERALL LENGTH C RADIUS r PRICE C1746Z 11⁄8" 1⁄2" 21⁄16" 5⁄32" $2595 C1747Z 11⁄2" 3⁄4" 21⁄4" 1 4 " $2795 1⁄2" SHANK MODEL CUTTER DIA. A CUTTING HEIGHT B OVERALL LENGTH C RADIUS r PRICE C1743Z 11⁄2" 5 8 " 21 2 " 1⁄2" $2295 1⁄2" SHANK MODEL CUTTER DIA. A CUTTING HEIGHT B OVERALL LENGTH C PRICE C3706Z 2" 11⁄4" 3" $4095 1⁄2" SHANK MODEL CUTTER DIA. A CUTTING HEIGHT B OVERALL LENGTH C PRICE C1520Z 13⁄16" 21⁄4" 33⁄4" $7195 1⁄2" SHANK MODEL SHANK PRICE C1798Z 1 4 " $3795 California customers see Pg. 58 for Prop. 65 and compliance surcharge information. WARNING! †1 WARNING! †1 WARNING! †1 WARNING! †1 WARNING! †1 WARNING! †1 WARNING! †1 WARNING! †1 WARNING! †1

C1378Z C1379Z

Order G3855 replacement bearing.

B C A

2" V Groove Bit

Used in paneling and general profiling in solid wood, composites and vinyl covered material.

B C A B C A

Slot Cutter with 3 Bearings

5

Dovetail Jig Bits

Specially made for use in dovetail fixtures and jigs, with an extra-long shank and a high rake angle for smooth, fast routing.

Reversible Stile & Rail

Roman Ogee with Guide Bearing

Order G3845 replacement bearing.

Order G3845 replacement bearing.

1⁄2" Dovetail Pattern Bit with

Guide Bearing

For use when template is on top of workpiece. Works well for sliding dovetails.

Ogee Bit with Guide Bearing

Order G3845 replacement bearing.

Dovetail Bits

Used in the production of dovetail joints for drawers and fine furniture. Suitable for routing wood, laminates, plywood, and composition paneling.

Tongue & Groove Kit

Kit includes: Arbor, 2 cutters, 2 bearings, and shim set.

Stepped Ogee Bit with

Order G3855 replacement bearing.

Corner Lock Miter Bit

Used for making 90° corner joints in wood. For 9 ⁄ 16" to 1" material. Instructions for use provided.

Corner Lock Miter Bit

Used for making

Straight Bits

Double Flute

WARNING!

Flush Trimming Bits with Guide Bearing

Order G3846 replacement bearing for C1079Z. Order G3855 replacement bearing for C1080Z. and C1082Z. Order G3848 replacement bearing for C1083Z.

WARNING!

WARNING!

Shear Cut Flush Trim Bits with Guide Bearing

Shearing action for smooth face finishing with zero tearout.

WARNING!

1⁄2" Flush Trimming Bit with 2 Bearings

Shearing action provides smooth face finishing.

Giant Thumbnail Bit with Guide Bearing

Roundover Bits with Guide Bearing

Order G3855 replacement bearing.

Order G3855 replacement bearing.

Pattern Cutting Bits with Upper Guide Bearing

Straight Bits

Single Flute

Straight Pattern Bit

This is used when cutting duplicate models from a pattern.

Corner Beading Bit with Guide Bearing

NOTE: Profile shown requires 2 passes.

Order G3855 replacement bearing.

Professional Finger Joint Cutter

This five-finger cutter is great for end joining short stock. Each antikickback style cutter has 3 wings.

Drawer Lock Bit

Can also be used to create glue joints. Ideal for 1 ⁄ 2 " stock.

Core Box Pattern Bit with Guide Bearing

For use when template is on top of workpiece. Makes fluted columns.

Order G3856 replacement bearing.

2" Surface Planer Solid Bit

Great for planing large surface areas on a wide variety of materials including; fiberboard, MDF, plastic, plywood and solid woods.

Keyhole Bits Single Flute

Used for wall mounting clocks, pictures and other hanging items. Also used for T-slots.

Core Box Bits

Multiple Beading Bit with Two Guide Bearings

Makes attractive beaded moulding in single or multiple passes.

• Cutter Diameter: 17⁄32"

• Cutting Length: 25⁄32"

• Overall Length: 23⁄8"

• Angle: 7°

• Shank diameter: 1⁄2"

• Maximum RPM: 24,000

3⁄8" Radius Cove Bit

• Cutter diameter: 11 4 "

• Cutting length: 1 2 "

• Overall length: 21⁄2"

• Shank diameter: 1⁄2"

• Maximum RPM: 18,000

Undersized Plywood 3-Pc. Bit Set

• Matches the true thickness of 1 4", 1⁄2" and 3⁄4" plywood

• Shank diameter: 1 4 "

• Includes Freud's wooden shadowbox case

• Cutter Diameter: 1 2 "

• Cutting Length: 13⁄16"

• Overall Length: 23⁄4"

• Angle: 8°

• Shank diameter: 1⁄4"

• Maximum RPM: 24,000

17⁄32" Dovetail Bit 1⁄2" Dovetail Bit 1⁄2" Dovetail Bit

• Cutter Diameter: 1 2 "

• Cutting Length: 1⁄2"

• Overall Length: 25⁄8"

• Angle: 14°

• Shank diameter: 1 4 "

• Maximum RPM: 24,000

1⁄2" Radius Cove Bit

• Cutter diameter: 11 2 "

• Cutting length: 5⁄8"

• Overall length: 21 2 "

• Shank diameter: 1⁄2"

• Maximum RPM: 16,000

15⁄8" Table Top Edge Classical Bold Bit

• Cutter diameter: 15 8 "

• Cutting length: 5 8 "

• Overall length: 21⁄2"

• Quadra-cut

• Maximum RPM: 16,000

• Shank diameter:

23⁄32" Mortising Bit

• Cutter Diameter: 23⁄32"

• Cutting Length: 3 8 "

• Overall Length: 21⁄8"

• Shank diameter: 1 2 "

• Maximum RPM: 24,000

5⁄16", 3⁄8", 7⁄16", 1⁄2" Depth Rabbeting Bit with Bearings

• Cutter Diameter: 13⁄8"

• Cutting Length: 1⁄2"

• Overall Length: 21⁄4"

• Maximum RPM: 16,000

• Shank Diameter: 1⁄4"

5⁄16" Radius Rounding Over Bit

•

•

•

•

•

•

13⁄4" Double Flute Bit

• Cutter Diameter: 13⁄

• Cutting Length: 11⁄4"

• Overall Length: 3"

• Shank diameter:

• Maximum RPM: 16,000

23⁄32" Mortising Bit

• Cutter Diameter: 23 32 "

• Cutting Length: 1⁄2"

• Overall Length: 13 4 "

• Shank diameter: 1⁄4"

• Maximum RPM: 24,000

5⁄16", 3⁄8", 7⁄16", 1⁄2" Depth Rabbeting Bit with Bearings

• Cutter Diameter: 13

• Cutting Length: 1⁄2"

• Overall Length: 21⁄4"

• Maximum RPM: 16,000

• Shank Diameter: 1 2

13⁄8" Classical Cove & Round Bit

• Cutter diameter: 13⁄8"

• Cutting length: 11 16 "

• Overall length: 23⁄4"

• Quadra-cut

• Maximum RPM: 16,000

• Shank diameter: 1 2 "

1⁄2" Mortising Bit

• Cutter Diameter: 1⁄2"

• Cutting Length: 3⁄4"

• Overall Length: 27 16 "

• Shank diameter: 1⁄4"

• Maximum RPM: 24,000

5⁄16" Up Spiral Bit

• Cutter Diameter: 5⁄16"

• Cutting Length: 1"

• Overall Length: 3"

• Maximum RPM: 24,000

• Shank Diameter: 1⁄2"

11⁄8" T-Slotting Cutter Bit

• Cutter Diameter: 11⁄8"

• Cutting Length: 13⁄16"

• Overall Length: 21 2 "

• Maximum RPM: 18,000

• Shank Diameter: 1⁄2"

1⁄2" Radius Beading Bit

• Cutter diameter: 11 2 "

• Cutting length: 3⁄4"

• Overall length: 21⁄2"

• Quadra-cut

• Shank diameter: 1⁄4"

• Maximum RPM: 16,000

3⁄4" Mortising Bit

• Cutter Diameter: 3⁄4"

• Cutting Length: 3 8 "

• Overall Length: 23⁄32"

• Shank diameter: 1⁄2"

• Maximum RPM: 24,000

3⁄4" Bearing Flush Trim Bit

• Cutter diameter: 3⁄4"

• Cutting Length: 1"

• Overall Length: 31⁄4"

• Maximum RPM: 24,000

• Shank Diameter: 1⁄2"

11⁄4" Spoilboard

Surfacing & Mortising Bit

• Cutter Diameter: 11 4

• Cutting Length: 1⁄2"

• Overall Length: 23⁄8"

• Shank diameter: 1⁄2"

• Maximum RPM: 18,000

1⁄2" Bearing Flush Trim Bit

• Cutter Diameter: 1⁄2"

• Cutting Length: 2"

• Overall Length: 43 8 "

• Max RPM: 24,000

• Shank Diameter: 1⁄2"

• Cutter diameter: 1"

• Cutting length: 1"

• Overall length: 27 8 "

• Maximum RPM: 24,000

• Shank Diameter: 1 2 "

• 15° Angle

211⁄64" "V" Panel Bit Set

• Cutter Diameter: 211 64 "

• Cutting Length: 11⁄8"

• Overall Length: 33⁄8"

• Maximum RPM: 16,000

• Shank Diameter: 1 2 "

13⁄8" Classical Roman Ogee Bit

•

•

•

•

•

•

3⁄8" Bearing Flush Trim Bit

• Cutter Diameter: 3⁄8"

• Cutting Length: 1⁄2"

• Overall Length: 25 16 "

• Maximum RPM: 24,000

• Shank Diameter: 1 4 "

1⁄2" Bearing Flush Trim Bit

• Cutter Diameter: 1 2 "

• Cutting Length: 1⁄2"

• Overall Length: 21⁄8"

• Maximum RPM: 24,000

• Shank Diameter: 1 4 "

17⁄8" Beadboard Tongue & Groove Bit

• Cutter Diameter: 17 8 "

• Cutting Length: 13⁄16"

• Overall Length: 27⁄8"

• Maximum RPM: 16,000

• Shank Diameter: 1 2 "

19⁄16" Cove & Bead Bit

• Cutter diameter: 19⁄16"

• Cutting length: 23 32 "

• Overall length: 23⁄4"

• Quadra-cut

• Maximum RPM: 16,000

• Shank diameter: 1 2 "

11⁄4" Crown Molding Bit

• Cutter diameter: 11 4 "

• Cutting length: 21⁄4"

• Overall length: 33⁄4"

• Maximum RPM: 18,000

• Shank diameter: 1⁄2"

• 45° Angle

3⁄32" Radius Round Nose Bit

• Cutter diameter: 3 16 "

• Cutting length: 3⁄8"

• Overall length: 2"

• Shank diameter: 1⁄4"

• Maximum RPM: 24,000

115⁄32" Lock Miter Bit

• Cutter dia.: 115⁄32"

• Cutting length: 7⁄8"

• Overall length: 23⁄8"

• Max. RPM: 16,000

• Shank dia.: 1⁄2"

• 22.5° Angle

T33483 Only $13000

5⁄32" Double Flute Straight Bit

• Cutter Diameter: 5 32 "

• Cutting Length: 5⁄8"

• Overall Length: 11⁄2"

• Shank diameter: 1⁄4"

• Maximum RPM: 24,000

Carving Bit Set, 3-Pc.

Includes:

60° V grooving bit " x 1⁄2" Up cut spiral ball nose " Up spiral bit

Shank diameter: 1 4 "

T33458 Only $2395

23⁄4" Raised Panel Bit

• Cutter diameter: 23 4 "

• Cutting length: 5⁄8"

• Overall length: 21⁄2"

• Maximum RPM: 12,000

• Shank diameter: 1⁄2"

T33487

31⁄2" Raised Panel Bit (Quadra-Cut)

• Cutter Diameter: 31⁄2"

• Cutting Length: 1 2 "

• Overall Length: 21 2 "

• Maximum RPM: 12,000

• Shank Diameter: 1⁄2"

1⁄4" Double Flute Straight Bit

• Cutter Diameter: 1⁄4"

• Cutting Length: 1"

• Overall Length: 27⁄8"

• Shank diameter: 1⁄4"

• Maximum RPM: 24,000

31⁄2" Raised Panel Bit

• Cutter diameter: 31⁄2"

• Cutting length: 5⁄8"

• Overall length: 21 2"

• Maximum RPM: 12,000

• Shank diameter: 1 2 "

T33485 Only $7395 T33593 Only $9995

Only $9995

T33488 Only $10695

31⁄2" Raised Panel Bit (Quadra-Cut)

• Cutter Diameter: 31⁄2"

• Cutting Length: 1 2 "

• Overall Length: 21 2 "

• Maximum RPM: 12,000

• Shank Diameter: 1⁄2"

T33489 Only $12495

Premier Adjustable Cabinet Bit Set, 3-Pc.

• Includes 31⁄2" Raised Panel Bit, 111⁄16" Premier Adjustable Rail & Stile Bit - Round Over

• Includes attractive wooden storage box

• Freud Perma-SHIELD® Coating

• Includes Freud's Quadra-Cut and Premier Adjustable Rail & Stile technology

• Cuts all composition materials, plywood, hardwood, and softwood

• Shank Diameter: 1⁄2"

Premier Adjustable Cabinet Bit Set, 3-Pc.

• Includes 31 2" Raised Panel Bit, 111⁄16" Premier Adjustable Rail & Stile Bit - Round Over

• Includes Freud's Quadra-Cut and Premier Adjustable Rail & Stile technology

• Attractive wooden storage box

• Freud Perma-SHIELD® Coating

• Cuts all composition materials, plywoods, hardwoods, and softwoods

• Shank Diameter: 1 2 "

T33480 Only $19000

Premier Adjustable Cabinet Bit Set, 3-Pc.

• Includes 31⁄2" Raised Panel Bit, 111⁄16" Premier Adjustable Rail & Stile Bit - Round Over

• Includes attractive wooden storage box

• Freud Perma-SHIELD® Coating

• Includes Freud's Quadra-Cut and Premier Adjustable Rail & Stile technology

• Cuts all composition materials, plywood, hardwood, and softwood

• Shank Diameter: 1⁄2"

T33477 Only $19000

Premier Adjustable Cabinet Bit Set, 3-Pc.

• Includes 31 2" Raised Panel Bit, 111⁄16" Premier Adjustable Rail & Stile Bit - Round Over

• Includes attractive wooden storage box

• Freud Perma-SHIELD® Coating

• Cuts all composition materials, plywoods, hardwoods, and softwoods

• Shank Diameter: 1 2 "

T33478

CNC Carbide Router Bits

1/4" Shank

T32928:

• Spiral plunge

• 0.10° Straight ball tip

• 1⁄16" Tapered 5.4° ball tip

• 30° 0.005 Engraving tip

T32931:

• Insert V-groove

• Spiral plunge

• 1⁄16" Tapered 5.4° ball tip

• 0.005" Router bit

10-Pc. Countersink Master Set

• #8, carbide-tipped 82°

• #10, carbide-tipped 82°

• #4, carbide-tipped 82° with nonmarring depth stop

• #6, 3 8" x 1 8" x5⁄16" Round shank

• #6, 3 8" x 1 8" x 5 16" Round shank

• #8, 25⁄64" x 9 64" x 5⁄16 Round shank

• #8, 3⁄8" x 48° x 1⁄4" Hex shank

• #10, 3 8" x 49° x 1⁄4" Hex shank

• 3⁄8", x 1⁄8" x 1 4" Hex Shank with adjustable depth stop

• Straight Wood Plug Cutter, 3⁄8" x 3⁄8" x 2"

T32947 AMS-620 $23399

8-Pc. General Purpose CNC Router Bit Starter Sets

1⁄4" Shank

• 1 2" Carbide Tipped V-Groove Bit

• 3⁄8" Carbide Tipped V-Groove Bit

• 1 8" Solid Carbide Spiral Plunge Bit

• 1 4" Solid Carbide Spiral Plunge Bit

• 1⁄16" Solid Carbide Up-Cut Spiral Router Bit

• 1⁄4" Solid Carbide Up-Cut Ball Nose Spiral Bit

• 3 16" Solid Carbide Spiral Plunge

• 0.005" Tip Width Solid Carbide 30° Engraving Bit

• 1 4" Spiral 'O' Flute, 1⁄4" Shank

• 1 8" Up-Cut Spiral Ball Nose, 1 4" Shank

• In-Groove Insert Engraving, 1⁄4" Shank

• CNC Insert V-Groove, 1 2" Shank

1⁄2" Shank

• 1⁄2" Carbide-tipped straight plunge

• 1⁄2" Solid carbide compression spiral

• 1⁄2" Solid carbide up-cut ball nose spiral

• 1⁄2" Solid carbide spiral plunge down-cut

• 1⁄2" Solid carbide spiral plunge up-cut

• 1⁄2" In-groove insert engraving tool

• 3 4" Insert V-groove 90°

• 11⁄2" Insert carbide mini spoilboard

8-Pc. Signmaking CNC Router Bit Starter Sets

• Insert V-Groove 90°, 1 2" Shank

• 3⁄16" V-Groove, 1 4 "

• 0.005" V-Tip Engraving Knife

• 1⁄2" V-Groove, 1⁄4" Shank

• 11⁄2" Spoilboard Upshear, 1⁄2" Shank

• 1⁄8" Spiral Plunge Down-Cut, 1⁄4" Shank

• 1⁄4" Spiral Plunge Down-Cut 1⁄4"

• 1⁄16" Carving Tapered 5.4° Ball Tip, 1⁄4" Shank

• 1⁄4" Carving Straight 0.10° Ball Tip, 1 4" Shank

• 3 16" Groove Engraving, 1⁄4"

• 5 8" V-Groove, 1⁄2" Shank

• 1⁄4" Core Box, 1 2" Shank

T32928

T32931

T32918 AMS-170

$65599

T32928 4-Pc. 1⁄4" Sign Making/Engraving Set $16699

T32931 4-Pc. 1⁄4" X-Carve® Starter Set $17099

T32930 AMS-130

$32099

T32917 AMS-174 $26999

T32929 AMS-133 $32599

82° Carbide-Tipped Countersinks with 1⁄4" Hex Shank & Depth Stop

T32939 #6 Screw 3⁄8" x 1⁄8" Drill $4295

T32940 #8 Screw 3⁄8" x 3 32" Drill $4299

T32941 #8 Screw 1 2" x 11⁄64" Drill $4395

Carbide-Tipped Up-Shear Bit Slot Mortisers

• Cutting Height: 1"

• Shank: 1⁄2"

• Overall Length: 6"

• Flutes: 2

T32923 1⁄2" Diameter $6399

T32925 3⁄4" Diameter $7799

Carbide-Tipped Plug Planer

Get fast and accurate plug trimming.

• Spring-loaded plunging action

• Adjustable depth of cut

• 1 4" Quick-release hex shank

• Replaceable non-marring base

• 2" Diameter x 19 32 "

T32936 PLP-100 Only $13099

4 Wing x 21⁄8" E-Z Dial Slot Cutter

1⁄4"–1⁄2" Shank

The E-Z Dial™ adjusts in just seconds and is accurate to .004."No shims or spacers and no need to disassemble the bit. Just turn the dial and lock the setting, it's that easy.

• Quick & easy setup

• Simply adjust the dial in 0.004" Increments

• Easily makes perfect grooves for today's undersized plywood

• Perfect for edge ("T") molding installation

T32922 55510 $15399

CNC Engraving Tool

The solid carbide knives can be changed while the tool body remains mounted in the CNC machine, helping maintain consistent cutting accuracy. The tool bodies are balanced for virtually no vibration. Excellent tool for etching. Overall Length: 2 1 ⁄ 2 ".

82° Carbide-Tipped Countersinks with 1⁄4" Hex Shank & Non-Marring Depth Stop

For when the details matter. These countersinks feature a non-marring depth stop to protect your workpiece, and large openings around the collar to prevent clogging.

T32932 #4 Screw 3⁄8" x 7 64" Drill $3295

T32933 #6 Screw 3⁄8" x 1⁄8" Drill $3295

T32934 #6 Screw 1⁄2" x 9 64" Drill $3395

T32935 #8 Screw 3⁄8" x 5⁄32" Drill $3395

T32926 8-Pc., 1⁄4" Shank $20599

T32927 8-Pc., 1⁄2" Shank $20599

82° Carbide-Tipped Countersinks

T32942 #4 Screw, 1⁄2" Shank $2999

T32945 #10 Screw, 1⁄4" Shank $2999

2" x 13⁄16" x 1⁄2" Super Rabbeting Bit with Replaceable Inserts

interchangeable cutting edges and an interchangeable guide collar enable you to cut a wide range of rabbets, from flush through 3 ⁄ 4" wide, in 1 ⁄ 16" increments, with five extra “plywood” sizes.

T32921 Super Rabbeting Bit $17099

T32948 Replacement Insert $799

T32949 Replacement Collar, 5-Pc. $4499

T32950 Replacement Collar, 7-Pc. $4499

Mini Spoilboard Surfacing Rabbeting Slab Leveler

1⁄2" Shank

Features 2+2 insert knife design wi two cutting flutes and two up-shear scorers, for a smoother finish at the bottom of the cut than traditional two-knife style router bits. Great for surface planing. Also suitable for router sled machines. Make sure that your router sled is fully stable and squared. Max. RPM: 24,000

T32920 Rabbeting Slab Leveler $21499

T33209 Replacement Side Insert $1399

T33210 Replacement Bottom Insert $1395

Spoilboard Surfacing Rabbeting Slab Leveler

with Carbide Inserts and 1⁄2" Shank

Features unique 2+2 insert knife design that contains two cutting flutes and two up-shear scorers, which provide a smoother finish at the bottom of the cut than traditional two-knife style router bits. The scorer leaves an improved finish at the bottom of the cut. Great for surface planing. Max RPM: 19,000

T32919 RC-2251 $31499

Solid Carbide

Spiral Upcut Bits

Due to the nature of solid carbide, these bits are not warranted against breakage.

Solid Carbide Flush Trim Laminate Bit

Due to the nature of solid carbide, these bits are not warranted against breakage.

Solid Carbide

Spiral Downcut Bits

Due to the nature of solid carbide, these bits are not warranted against breakage.

Solid Carbide 7° Bevel Trim Laminate Bit

Due to the nature of solid carbide, these bits are not warranted against breakage.

Classical Bits with Guide Bearing

Combines a bead with a cove. For use on 5⁄8" to 3⁄4" material.

Roman Ogee with Guide Bearing

Order DC3081 replacement bearing.

Pattern Bit with Guide Bearing

Cove Bits with Guide Bearing

Order G3855 replacement bearing.

Straight Bits

Flush Trim Bits with Guide Bearing

DC1801

Excellent for smooth trimming of wood, composites, laminate or materials such as Corian. DC1804 features a shear cutting angle to reduce or eliminate sanding.

DC1804

Extra-Length Straight Bits

These bits have the extra length needed for jigs and fixtures. End of bit relief allows for fast plunging.

Roundover Bits with Guide Bearing

These shear angle bits create a perfect radius with zero tear-out. One of the most popular bits for edge forming.

Order DC3081 replacement bearing.

Deluxe 1⁄2" Rabbeting Bit Set 1⁄4"

Shank

Includes a rabbeting bit and seven interchangeable bearings with bushings, washers, and screws, for cutting multiple rabbet widths.

Cutting length: 1 ⁄ 2 ".

DC1827

Rabbeting Kits

1⁄4" and 1⁄2" Shank Options

Each kit includes a Roman Carbide® rabbeting bit along with bearings, hex key and Allen screw.

DC1669

DC1670

2-Pc. Panel Bit Set with Undercutter

1⁄2" Shank

Reversible ogee stile & rail bit paired with a convex raised panel bit with an undercutter. The undercutter provides a consistent 1 ⁄ 4" thick panel edge for perfect fits. Ideal for making raised panels from thicker stock.

3-Pc. Straight Flush Trim Set

1⁄4" Shank

Bits included:

• 1 2" x 13 16" with bottom bearing

• 1 2" x 3⁄4" with top bearing

• 5⁄8" x 3 4" with top bearing

Deluxe 3⁄4" Rabbeting Bit Set 1⁄2" Shank

Includes a rabbeting bit and five interchangeable bearings with bushings, washers, and screws, for cutting multiple rabbet widths. Cutting length: 3 ⁄ 4

Cuts rabbet sizes:

• 1⁄8"

• 3⁄16"

• 1⁄4"

DC1826

• 5⁄16"

• 3⁄8"

2-Pc. Panel Bit Set

1⁄2" Shank, Classical Stile & Rail

Includes a reversible classical stile and rail bit for making both stile & rail as well as an ogee panel raising bit.

DC1831

3-Pc. Panel Bit Set

1⁄2" Shank

Everything needed to make raised panel stile and rail cabinet doors. Includes ogee panel and Roman ogee stile & rail bits.

3-Pc. Straight Flush Trim Set 1⁄2" Shank

Bits included:

• 1⁄2" x 13 16" with bottom bearing

• 3⁄4" x 1" with top bearing

• 11⁄8" x 11 2" with top bearing

Deluxe 3⁄4" Rabbeting Bit Set 1⁄2" Shank

Includes a rabbeting bit and seven interchangeable bearings with bushings, washers, and screws, for cutting multiple rabbet widths. Cutting length: 3 ⁄ 4".

DC1828

2-Pc. Panel Bit Set

1⁄2" Shank, Roman Ogee

Reversible Roman ogee stile & rail bit handles stock from 11 16" to 7 ⁄ 8 " thick.

Raised panel bit produces convex profile and is 3 1 8 " in diameter.

DC1790

3-Pc. Plywood Bit Sets

1⁄4" and 1⁄2" Shank Options

Sized for standard plywood thicknesses, these straight bits yield precise fitting dadoes. Comes with a wooden storage box.

Bits included:

• 7⁄32" Double-fluted straight bit

• 15⁄32" Double-fluted straight bit

• 23 32" Double-fluted straight bit

DC1702 1⁄4" Shank Only $1295

DC1703 1 2" Shank Only

4-Pc. Classical Cutter Bit Set 1⁄2" Shank

Bits included:

• Classical plunge bit

• Roman Ogee/ round nose bit

• Two different classical profiles

5-Pc. Carbide-Tipped Jig Set

1⁄2" Shank

This has all the bits needed for a wide variety of box and dovetail joints. Set comes in a wooden case.

Bits included:

• 1 2" 14° Dovetail

• 5⁄8" 7° Dovetail

• 3⁄4" 7° Dovetail

• 5⁄16" Straight

• 3⁄8" Straight

DC1821

Only $2195

6-Pc. Stile & Rail Bit Set 1⁄2" Shank

These 1 2 " shank router bits are like having a cabinet shop in a box!

Bits included:

• Door edge bit

• Drawer corner lock bit

• Joint bit

• Ogee panel bit

• Two-Piece ogee stile & rail bits

WARNING! †1 WARNING! †1

DC1825

Only$17600

12-Pc. Router Bit Set

1⁄4" Shank

A convenient 12-piece router bit set with 1 4" shank diameter.

5 Pc. Double-Fluted Straight Bit Set 1⁄2" Shank

This set comes with five of the most popular straight bit sizes in an attractive wooden box.

Bits included:

• 1 4" Double-fluted straight

• 3⁄8" Double-fluted straight

• 1 2" Double-fluted straight

• 5⁄8" Double-fluted straight

• 3⁄4" Double-fluted straight

DC1701 Only $1895

10-Pc. General-Purpose Router Bit Set

1⁄4" and 1⁄2" Shank Options

A 10-pc. multipurpose set for the most poplar profiles at an affordable price. Comes in an attractive wooden box.

" 8° Dovetail bit

" Flush trim bit

" Radius roundover bit

" 90° V-groove bit

" Straight bits

" Combination panel bit

" Rabbeting bit

WARNING! †1

DC1837 Only $6895

" Roman ogee bit

WARNING! †1

DC1638A 1⁄4" Shank Only $6395

DC1639A 1 2" Shank Only $6395

20-Pc. Master Router Bit Set

1⁄4" Shank

This set includes twenty of the most popular bits offered by Roman Carbide, all housed in a handsome wooden box.

Bits included:

• 1⁄2" Flush trimming bit

• 45° Chamfer bit

• 1⁄4" and 1⁄2" Cove bits

• 1⁄4", 1 2", and 3 4" Double-fluted straight bits

• 3 8" and 1⁄2" Core box bits

• 1⁄4" Combination panel bits

• 3 8" and 1⁄2" Radius beading bits

• 3 8" Rabbeting bits

• 3 8" and 1⁄2" Dovetail bits

• 5 32" and 1⁄4" Radius Roman ogee bits

• 1⁄4" and 1 2" Radius roundover bits

• 5 8" 90° V-groove bits

WARNING! †1 WARNING! †1

DC1822 Only $11095

Spiral Cutterheads

Spiral cutterheads reduce tear out and leave a finish that is second-to-none. Our Spiral Cutterheads have 9 spirals which results in an incredible finish! Each indexable insert has four cutting sides so the edges can be rotated to expose a new cutting edge when dull or chipped, resulting in very little downtime and a huge savings over conventional carbide cutters. The solid carbide inserts we use are extra thick and heavy-duty.

Jig built by the founder and CEO of Grizzly to shape acoustic guitar necks

Optional Accessories

Moulding Head System

This system allows you to use a wide variety of cutter patterns, with precision-crafted CNCmachined, aircraft-aluminum cutterheads. The 2" head accepts 2" knives and is for use with 11 ⁄ 2 HP or larger shapers with 3 ⁄4" x 3" long spindles. The 3" moulding head is ideal for use with our larger shapers and allows you to use all of our 2" and 3" cutters. A 4" spindle is required when using the 3" cutterhead on the Model G1026.

Find moulding head cutters on P. 57.

10-Pc. Brass Bushing Set

Follow any template for perfectly matched multiples. The wide range of sizes allows full flexibility between router bit cutter and various templates. Fits Porter•Cable® routers and others with template guide adapters.

Set Includes:

• 5⁄16" OD–1⁄4" ID

• 3 8" OD–9⁄32" ID

• 7⁄16" OD–11 32" ID

• 1⁄2" OD–13 32" ID

• 5⁄8" OD–17 32" ID

• 3 4" OD–21⁄32" ID

• 51⁄64" OD–5⁄8" ID

• 1" OD–7⁄8" ID

• Two lock nuts

1⁄2" Shaper Cutter Arbor for Routers

Use your variable-speed router and router table like a shaper! This arbor fits 1 ⁄ 2" router collets and will accept 1 ⁄ 2" shaper cutters that are 7 8" to 13 4" thick. Spacers can be used with cutters that are less than 7⁄ 8". For use with variable-speed routers only.

Guide Adapter for Bosch® Routers

Fits Bosch® 1600, 1601, 1602, 1603, 1604, 1606, 1611, 1611EVS, 1615, and 1615EVS routers.

W1131/T26659

H2879Z

H2878Z

H2876Z

H2877Z

H2875Z

H7319

Rub Collars

Increase your shaper’s versatility with rub collars!

Rub collars are an absolute must if you use a shaper to create detailed profiles or cuts. Similar to router bits with guide bearings, rub collars serve as guides that limit the depth of cut, allowing you to shape complex and repeated patterns. They come in various sizes to match the diameter of the shaper cutter, allowing for a range of cutting depths and profiles.

Investing in a set of high-quality rub collars will give you a whole new range of options as a woodworker. Use them below, in between, or above cutters to tackle intricate and unique shaping tasks with confidence, knowing that each pass through the shaper will be as flawless as the last.

Our rub collars feature high-quality shielded ball bearings.

MODEL ID OD PRICE

W1110 1⁄2" 11⁄8" $550

W1111 1⁄2" 11⁄4" $750

W1112 1⁄2" 13⁄8" $795

W1113 1⁄2" 11⁄2" $795

W1114 3⁄4" 15⁄8" $795

W1115 3⁄4" 111⁄16" $1050

W1116

Bushings and Spacers

Bushings and spacers allow you to position your shaper cutter or cutters anywhere on the spindle. Use them between cutters or stack them above the cutter to bear against the spindle nut.

Straight Bushings

7⁄16" Tall

T-Bushings

1⁄2" x 1" Spacers for 1⁄2" Spindles

3⁄4" x 11⁄4" Spacers for 3⁄4" Spindles

Double T-Bushings

15⁄16" Tall

Long T-Bushings

15⁄16" Tall

1" x 11⁄2" Spacers for 1" Spindles

11⁄4" x 13⁄4" Spacers for 11⁄4" Spindles

Drop Leaf Bead, 3⁄4" Bore

Drop Leaf Bead, 1⁄2" Bore

C2006 (Tongue)

C2005 (Groove)

Rabbeting,

C2029 (Groove)

C2028 (Tongue)

Rabbeting,

WARNING!

Finger Joint

Reversible Detail Wave

Reversible Detail Ogee

Reversible Detail Bead & Cove

Reversible Stile & Rail

Roman Ogee with Rub Collar

Anti-Kickback Includes 3 shims and 2 T-bushings.

Reversible Stile & Rail

Beveled with Rub Collar

Anti-Kickback Includes 3 shims and 2 T-bushings.

Reversible Stile & Rail Classical with Rub Collar

Anti-Kickback Includes 3 shims and 2 T-bushings.

Reversible Stile & Rail Ogee with Rub Collar

Anti-Kickback Includes 3 shims and 2 T-bushings.

1⁄2" “V” Paneling Cutter Set 3⁄4" “V” Paneling Cutter Set 1" “V” Paneling Cutter Set

5° Face Cut Panel Cutters for 3⁄4" Panels

Ogee Panel Cutters for 3⁄4" Panels

Glass Door Cutters

We’ve received so many requests for this cutter that we just had to make one for our Stile & Rail sets. (Cutter does not cut glass.)

15° Face Cut Panel Cutters for 3⁄4" Panels

15° Face & Quarter Round for 3⁄4" Panels

Undercutter for Panel Cutters for 3⁄4" Bore Only

Used alone or in conjunction with our panel cutters, this undercutter allows you to mill thicker raised panels to a standard 1 4" to match slots cut with our stile and rail sets. Perfect for raised panels thicker than 5 ⁄ 8 ".

Convex Panel Cutters for 3⁄4" Panels

Flooring Cutter Set

For 5⁄8" and 3⁄4" material

Designed for use with 5 8 " and 3 ⁄ 4" lumber, these cutters are great for designing new floors or for creating replacement planks for repair and renovation. For use on 3 ⁄ 4" spindles. Tongue and groove are below center, so you can re-sand and finish a number of times.

C2305

Groove

C2306

Tongue

Straight Cutters and Spacers for 3⁄4" Bore Stile & Rail Sets

Choose the 5.5mm set for undersized 1 ⁄ 4" panels and the 1 ⁄ 2 " set for 1 ⁄ 2 " panels. Stack cutters for 3 4" panels. Please note changing the tongue thickness will change the overall thickness of the stacked stile and rail sets.

Replacement Cutters for 3⁄4" Bore Stile & Rail Sets

Customize your 3/4" bore stile and rail sets for standard thickness plywood panels with this cutter. Stack cutters for 3/4" panels. Please note that changing the tongue thickness will change the overall thickness of the stacked stile and rail sets. Adjust your stile and rail material thickness accordingly. Includes cutter.

Straight Cutters for 11⁄4" Bore Stile & Rail Sets

Customize your 1 1 4" bore stile and rail sets for variable thickness panels in 1 ⁄ 4" increments with these straight cutters. For panels 3 ⁄ 4" thick and greater, double up the cutters for your desired thickness.

C2151 Passage 1⁄4"

Crown Moulding Styles

Our 1" bore industrial quality crown moulding cutters are 3 1 2 " in diameter and tipped with 3mm carbide. We really overdid it this time, so produce all the moulding you want. Custom millwork companies—take a good look at these. We recommend a 3 HP 1" spindle shaper for using these cutters.

Cove Moulding

Crown Moulding

Crown Moulding

Handrail Shaper Cutters

Save a fortune on expensive handrails by creating your own rail stock with your shaper. Recommended for use on 3 HP or larger shapers, these carbide tipped cutters let you mill full-sized 2 1 2 " high rails out of your choice of softwoods or hardwoods. Use these cutters separately to create interesting shapes and lines on other projects.

C2214

C2215

Workpiece 21⁄2" x 13⁄4"

Stile & Rail Sets 6-Piece Entry Doors

Build the entryway of your dreams using our 6-piece Stile and Rail Sets. Each pair includes five cutters and one spacer. We also have 1 2 " and 5.5mm cutters and spacers available for 3 ⁄ 4" bore only. Please order panel cutters separately.

For standard 1 3 ⁄ 4" material

Stile & Rail Set

Roman Ogee

Stile & Rail Set Ogee

Stile & Rail Sets

Quarter Round

Stile & Rail Set

Quarter Bead

Stile & Rail Sets Bead and Cove

Stile & Rail Sets Quarter Round

WARNING!

WARNING!

For

For

WARNING!

Stile & Rail Sets

Roman Ogee

WARNING!

WARNING!

Stile & Rail Sets Quarter Bead

Stile & Rail Sets Quarter Round

Stile & Rail Sets Bead and Cove

Stile & Rail Sets Roman Ogee

Stile & Rail Sets Quarter Bead

For glass doors, order C2323 (11 4" bore only) $4295

For a 1 2" tongue depth, order C2152 (11⁄4" bore only) $3595

Passage Doors, Mission Style

Passage Doors, Shaker Style

5-Wing, Micro-Grain, Carbide-Tipped Shaper Cutters

These razor-sharp, micro-grain carbide-tipped shaper cutters leave a surface on wood that looks like it's been sanded and buffed. They feature five-blade, high-speed balanced cutterheads with precision-ground top and bottom arbor seats for absolute precision. They even have a 5⁄16" keyway for use on milling machines! You'll be amazed at the quality and superior results of these shaper cutters.

Bead & Cove Cutter

Ogee Cutter

Ogee Panel Cutter

Reversible Detail Bead & Cove

Reversible Detail Ogee

Panel Cutters

Bevel Cutters

Convex Panel Cutter

Panel Cutter Face & Quarter Round

Undercutter & Spacer Set Double Flute Cutter Double Lock Miter

Straight Cutters

Undercutter for Panel Cutters

Used alone or in conjunction with our Panel Cutters, these Carbidetipped undercutters mill thicker raised panels to a standard 1⁄4" to match slots cut with our Stile and Rail sets. Perfect for raised panels thicker than 5 8".

Door Lip Flush Overlay

Use this popular profile to finish cabinet door lips (3⁄4" material) for flush overlay mounting. This high quality cutter is manufactured with 3mm thick C-2 carbide for long life and sharpness. 5,000-10,000 RPM.

Door Lip Back Bevel

Use this popular profile to finish cabinet door lips (3 4" material) for flush overlay mounting. This high quality cutter is manufactured with 3mm thick C-2 carbide for long life and sharpness. 5,000-10,000 RPM.

Door Lip Bead

Use this popular profile to finish cabinet door lips (3⁄4" material) for flush overlay mounting. This high quality cutter is manufactured with 3mm thick C-2 carbide for long life and sharpness. 5,000-10,000 RPM.

1⁄2" Straight Cutter

Customize 3 4" bore stile and rail sets for for 1⁄2" plywood panels with this cutter. Stack cutters for 3 4 inch panels. Please note that changing the tongue thickness will change the overall thickness of the stacked stile and rail sets. Adjust your material thickness accordingly.

5⁄8" Glass Door Cutter

The DC2302 glass cutter matches the outside diameter of our stile and rail sets so you can stack them together for a one pass cut. The cutter can be used on woods, wood composites, plywood, and some plastics at 7,000 R.P.M.

Makes this cut

1⁄2" Glass Door Cutter

The DC2303 glass cutter matches the outside diameter of our stile and rail sets so you can stack them together for a one pass cut. The cutter can be used on woods, wood composites, plywood, and some plastics at 7,000 R.P.M.

Makes this cut

1⁄2" Glass Door Cutter

The DC2301 glass cutter matches the outside diameter of our stile and rail sets so you can stack them together for a one pass cut. The cutter can be used on woods, wood composites, plywood, and some plastics at 7,000 R.P.M.

Makes this cut

5⁄8" Glass Door Cutter

These glass cutters match the outside diameter of our Stile and Rail sets so you can stack them together for a one pass cut. (Cutter does not cut glass.)

Makes this cut

Moulding Head System

Have you priced milled trim stock lately? If you have a shaper, you can create an amazing selection of casings, door mouldings, window trim, and more for a fraction of lumber yard costs. Our Moulding Head System allows you to choose from a wide variety of cutter patterns for use in these CNC machined, aircraft-aluminum cutterheads. The 2" moulding head accepts all 2" knives and works on shapers such as our G1035 and W1674 with 3⁄4" spindles and motors 11⁄2 HP or larger. A 3" spindle is required. The 3" moulding head is ideal for use with our larger shapers and allows you to use all of our 2" and 3" cutters. A 4" spindle is required when using the 3" cutterhead on the Model G1026. Will also fit G5912Z, G7214Z, G8621, and G5913Z

2" Panel Mould

2" Baseboard

2" Picture Frame

2" Picture Frame

2" Picture Frame

3" Picture Frame

2" Pickwick

3" Casement

2" Picture Frame

2" Chair Rail/ Bead

2" Crown

2" Picture Frame

3" Picture Frame

2" Astragal

3" Casement

2" Brick Mould

2" Ogee

2" Casement 2" Casement

3" Casement

3" Casement

3" Base

2" Window Sash 2" Window Sash

D1708 $2695

D1715 $2695

D1717 $2750

G2618

$2995

G2333 $2895

D1728 $2750

G2620

$2995

G2625 $2995

G2621 $2995

D1710 $2695

D1721 $2895

D1703 $2750

D1722 $2895

G2610 $2995 G2609 $2995

D1702 $2695

D1706 $2695

G2338 $2895

G2358 $2895 G2331 $2895

G2335 $2895

D1705 $2750

G2322 $2895

G2339 $2895

D1700 2" Head, 3⁄4" Bore $19100

D1701 3" Head, 1" Bore $21400

In the heart of every woodshop lies the pivotal hero—the circular saw blade. Our curated selection of high-quality blades is crafted to help you get more out of your shop with a blade for every use.

From versatile, general-purpose blades, designed to glide through any cut for total efficiency, to specialized thin-kerf, High Alternate Top Bevel blades engineered for clean cuts in plywood and melamine, our options span the spectrum. Why compromise and use the wrong blade for the wrong job? Explore our options of ripping blades that cut with the grain, dado sets for the perfect groove, crosscut blades for precision miters every time, and more. Find the right match for your project. Embrace the craft, enhance your work, and let a good blade be the catalyst for your creativity.

10" General Purpose

• Grind: ATB

• Kerf: 0.120"

• Arbor: 5⁄8"

T26697 30T Only $5495

T26698 40T Only $6595

WARNING! †2

10" 80T Cut-Off Carbide-Tipped

• Grind: ATB

• Kerf: 0.120"

• Arbor: 5⁄8"

T26699 Only $8395

WARNING! †2

8" Stacked Dado Set Carbide-Tipped

For extremely clean cuts with zero tear-out. This dado set cuts square sides and flatbottom dados from 1 ⁄ 8 "–29 ⁄ 32" wide and has a 5 ⁄ 8 " arbor.

• (2) 24T x 1⁄8" kerf blades

• (1) 4T x 5⁄64" kerf chipper

• (5) 4T x 9⁄64" kerf chippers

• (2) 0.012" thick magnetic adjustment shims

• (2) 0.015" thick magnetic adjustment shims

T26696 Only $12395

WARNING! †2

12" 40T Ripping

• Grind: ATB

• Kerf: 0.125"

• Arbor: 1"

T26700 Only $7695

WARNING! †2

10" Blade Carrying Case

Stores and protects up to ten 10" blades (5 per side). Sides are marked sharp and dull to keep track of blade condition. Made from highimpact plastic.

T23265 Only $2695

WARNING! †2

10" 40T Combination

Carbide-Tipped

• Grind: ATB

• Rake angle: 15°

• Top angle: 10°

• Kerf: 0.118"

• Arbor: 5⁄8"

T30427 Only $4900

WARNING!

8" Premium Dado Set

• Min. cut: 1⁄4"

• Max. cut: 29⁄32"

• Arbor: 5⁄8"

• Hook angle: -5°

• Chipper widths: 1⁄4", 1⁄8" (x2), 1⁄16", 3⁄32"

T33374 Only $29900

10" 24T Ripping

10" 24T Ripping

Carbide-Tipped

• Grind: ATB

• Rake angle: 15°

• Top angle: 10°

• Kerf: 0.118"

• Arbor: 5⁄8"

T33247 Only $3900

WARNING!

General Purpose

10" 80T Ultra-Fine Finish

Forrest saw blades have become legendary for their ability to leave highly polished, finish-ready surfaces on nearly everything they cut. Choose the style best suited for your cutting needs and see why Forrest has earned the reputation for being the saw blade by which all others are judged. Made in the USA.

Woodworker I

All-purpose blades.

Crosscut up to 2" thick and rip up to 1" thick. The 10" blase has a 30° alternate top bevel with a 5° face hook.

The 12" blade has 20° ATB grind.

Chopmaster

For chop saws and radial arm saws. Made with double hard C4 sub-micron carbide for up to 300% longer life. A heavier than normal steel plate and a negative face hook maintain maximum stability for the best cut. Each blade is hand straightened to a runout of 0.001–0.002 for maximum cut quality.

Woodworker II

With this all purpose table saw blade, you can rip and crosscut 1"–2" rockhards and softwoods, resulting in a smooth as sanded surface. With 20° face hook, ply veneers will crosscut with no bottom splinter at moderate feed rates. Double-hard and 40% stronger C4 carbide will give up to 300% longer life between sharpenings. Ends blade changing (one blade does rip, combo and crosscut), second-step finishing, and cutting 1 ⁄ 16" oversize to allow for resurfacing.

Ply Veneer Worker

Designed for cutting manmade materials such as plywood, vinyl clad, composite and veneer products. Blade tips are super hard, long life micro-grain carbide with a 35° ATB grind for ultra-smooth cuts. The 10° face hook allows for easier feed on table saws, and the sides are chamfered to eliminate heat buildup and aid chip clearing. Full kerf (0.125") requires 2 1 ⁄ 2 HP saws.

WARNING! †2

Duraline Hi-A/T Melamine & Veneer

Eliminates the need for a small scoring saw blade on table saw work. For chipless cutting of two-sided melamine, vinyl, polyester, and Kortron. Recommended for thin, low pressure, two-sided laminates, and veneer plywood. The 40° points slice through thin bottom layers with no tears or chips. Made with double-hard C4 sub-micron carbide for longer life between sharpenings.

WARNING! †2

Dado Sets

No splintering when crosscutting oak, ply veneers, and melamine. No staggered steps or round bottoms! Cuts in rip, cross-cut, and miter at any depth. Super hard carbide gives up to 300% longer life, especially good on plywoods and abrasive particle boards.

WARNING! †2

Finger Joint Blades, 2-Pc.

Set interlocks for a 1 ⁄ 4" finger joint, or reverse the blades for a 3 8 " finger joint.

WARNING! †2

Saw Stiffener

For smoother, quieter cuts, a single Forrest Dampener-Stiffener is highly recommended. Select one stiffener 1 ⁄ 2 to 2 3 of the blade diameter and mount it against the outside of the blade.

WARNING! †2

Electro-Blu™ Carbide-Tipped Saw Blades

These industrial carbide-tipped saw blades from Amana Tool ® are engineered for the smoothest possible cuts and extended blade life, with large carbide teeth that can be sharpened several times.

10" x 40T General Purpose

• Grind: ATB

• Hook angle: 18°

• Kerf: 0.134"

• Arbor: 5⁄8"

• Copper plug technology for reduced vibration

T32902 Only $8199

WARNING! †2

12" x 72T Cut-Off & Crosscut

• Grind: TGC

• Hook angle: 10°

• Kerf: 1"

• Arbor: 1"

• Copper plug technology for reduced vibration

T32912 Only $14995

WARNING! †2

10" x 80T Double-Sided Melamine

• Grind: H-ATB

• Hook angle: -6°

• Kerf: 0.126"

• Arbor: 5⁄8"

• Copper plug technology for reduced vibration

T32906 Only $11395

WARNING! †2

10" x 50T Combination Rip/ Crosscut

• Grind: 4 & 1

• Hook angle: 15°

• Kerf: 0.135"

• Arbor: 5⁄8"

T32903 Only $7995

WARNING! †2

10" x 72T Solid Surface

• Grind: MTC

• Hook angle: 0°

• Kerf: 0.126"

• Arbor: 5⁄8"

• Copper plug technology for reduced vibration

T32913 Only $12395

WARNING! †2

10" x 80T Laminate & Trim

• Grind: TGC

• Hook angle: 10°

• Kerf: 0.126"

• Arbor: 5⁄8"

• Copper plug technology for reduced vibration

T32911 Only $11395

WARNING! †2

10" x 20T Ripping

10" x 80T Fine Trim

• Grind: ATB

• Hook angle: 10°

• Kerf: 0.126"

• Arbor: 5⁄8"

• Copper plug technology for reduced vibration

T32910 Only $11295

WARNING! †2

10" x 60T Laminate & Trim

• Grind: TGC

• Hook angle: 10°

• Kerf: 0.126"

• Arbor: 5⁄8"

• Copper plug technology for reduced vibration

• Grind: FTG

• Hook angle: 18°

• Kerf: 0.126"

• Arbor: 5⁄8"

• Cooling slots for reduced heat when ripping

• Copper plug technology for reduced vibration

T32901 Only $10195

WARNING! †2

10" x 60T CutOff & Crosscut

• Grind: ATB

• Hook angle: 10°

• Kerf: 0.126"

• Arbor: 5⁄8"

• Copper plug technology for reduced vibration

8" Dado Blade Sets

• Five 2-wing chippers

• Grind: ATB/FT

• Hook angle: -5°

• Kerf: 1⁄4"–3⁄16"

• Arbor: 5⁄8"

WARNING! †2

T32915 24T Only $22800

T32916 46T Only $27400

T32905 Only $7695

T32904 Only $7495

Featuring unique coatings and TiCo™ (titanium cobalt) hi-density carbide, Freud saw blades are carefully crafted to provide superior performance and maximum blade life, high-quality materials, innovative designs, and the industry's most sophisticated manufacturing processes. Freud saw blades—precisely the best.

10" Rip

• Tooth count: 24T

• Grind: Flat

• Hook angle: 20°

• Kerf: 1⁄8" and 3⁄32" options

• Arbor: 5⁄8"

WARNING! †2 ITALY MADE IN MODEL KERF OPTIONS PRICE T24410 Standard Kerf: 1⁄8" $7595 T24411 Thin Kerf: 3⁄32" $5999

10" General Purpose

• Tooth count: 40T

• Grind: Hi-ATB

• Hook angle: 30°

• Kerf: 1⁄8" and 3⁄32" options

• Arbor: 5⁄8"

10" Glue Line Rip

• Tooth count: 30T

• Grind: TGC

• Hook angle: 12°

• Kerf: 1⁄8" and 3⁄32" options

• Arbor: 5⁄8"

10" Ultimate Cut-Off

• Tooth count: 80T

• Grind: ATB

• Hook angle: 10°

• Kerf: 1⁄8" and 3⁄32" options

• Arbor: 5⁄8"

10" Combination

• Tooth count: 50T

• Grind: ATB-R

• Hook angle: 10°

• Kerf: 1⁄8" and 3⁄32" options

10" Plywood & Melamine

• Tooth count: 80T

• Grind: Hi-ATB

• Hook angle: 2°

• Kerf: 1⁄8" and 3⁄32" options

• Arbor: 5⁄8"

†2 MODEL KERF OPTIONS PRICE T24417 Standard Kerf: 1⁄8" $9999 T24418 Thin Kerf: 3 32 " $7999 MODEL KERF OPTIONS PRICE T24424 Standard Kerf: 1⁄8" $7195 T24431 Thin Kerf: 3 32 " $9195 MODEL KERF OPTIONS PRICE T24429 Standard Kerf: 1⁄8" $9995 T24427 Thin Kerf: 3 32 " $8195

10" Cabinet Maker's Crosscut

• Tooth count: 60T

• Grind: ATB

• Hook angle: 10°

• Kerf: 1⁄8"

• Arbor: 5⁄8"

MODEL KERF OPTIONS PRICE T24415 Standard Kerf: 1⁄8" $7695 T24414 Thin Kerf: 3⁄32" $5999 California customers see Pg. 67 for Prop. 65 and compliance surcharge information.

†2 MODEL PRICE T27029 $7995

†2 MODEL KERF OPTIONS PRICE T24409 Standard Kerf: 1⁄8" $7195 T24413 Thin Kerf: 3 32 " $4395 MODEL PRICE T24441 $3999

10" Heavy-Duty Multi-Purpose

• Tooth count: 60T

• Grind: TGC

• Hook angle: 10°

• Kerf: 1⁄8"

• Arbor: 5⁄8"

Stacked Dado Sets

Cut grooves from 1 ⁄4 "–7 ⁄ 8 " with twowing chippers that require less horsepower than 4-wing chippers. Includes a shim set for fine adjustments.

WARNING! †2

WARNING! †2

14" Combination

• Tooth count: 70T

• Grind: COMB

• Hook angle: 10°

• Kerf: 5⁄32"

• Arbor: 1"

WARNING! †2

12" Thin-Kerf Crosscut

• Tooth count: 80T

• Grind: ATB

• Hook angle: 15°

• Kerf: 3⁄32"

• Arbor: 1"

WARNING! †2

8" Box Joint Cutter Set

2-Blade set cuts 1 ⁄ 8 " or 3 ⁄ 8 " box joints.

• Tooth count: 20T

• Grind: Flat

• Hook angle: 20°

• Arbor: 5⁄8"

WARNING! †2

Dial-A-Width Stacked Dado Sets

These 8" and 10" dado sets use a convenient patented dial system, eliminating the need for shims.

• Each “click” of the dial adjusts the blade by 0.004"

• Arbor size is 5 ⁄ 8 "

• Includes 2 blades, 5 chippers, wrench and carrying case

14" General Purpose

• Tooth count: 54T

• Grind: Hi-ATB

• Hook angle: 30°

• Kerf: 1⁄8"

• Arbor: 1"

WARNING! †2

12" Plywood & Melamine

• Tooth count: 96T

• Grind: Hi-ATB

• Hook angle: 2°

• Kerf: 1⁄8" and 3⁄32" options

• Arbor: 1"

WARNING! †2

12" Ultimate Cut-Off

• Tooth count: 96T

• Grind: ATB

• Hook angle: 10°

• Kerf: 1⁄8" and 3⁄32" options

• Arbor: 1"

WARNING! †2

Diablo blades feature super-thin laser-cut kerf, Perma-SHIELD® coating, TiCo™ hi-density carbide, precision tensioning, a Hard-Core™ steel plate, laser-cut stabilizer vents, and heat expansion slots and arbor.

10" Ripping

• Tooth count: 24T

• Grind: ATB

• Hook angle: 15°

• Kerf: 0.098"

• Arbor: 5⁄8"

10" General Purpose

• Tooth count: 40T

• Grind: ATB

• Hook angle: 15°

• Kerf: 0.098"

• Arbor: 5⁄8"

10" Finishing

• Tooth count: 60T, 80T, 90T options

• Grind: Hi-ATB

• Hook angle: 15°

• Kerf: 0.098"

• Arbor: 5⁄8"

12" General Purpose

• Tooth count: 44T

• Grind: ATB

• Hook angle: 15°

• Kerf: 0.098"

• Arbor: 1"

12" Finishing

• Tooth count: 80T and 100T options

• Grind: ASFG

• Hook angle: 7°

• Kerf: 0.098"

• Arbor: 1"

12" Combination

• Tooth count: 60T

• Grind: COMB

• Hook angle: 15°

• Kerf: 0.118"

• Arbor: 1"

71 ⁄4" Finishing

• Tooth count: 40T and 60T options

• Grind: ATB

• Hook angle: 15°

• Kerf: 0.059"

• Arbor: 5⁄8"

10" Fiber Cement

• Tooth count: 6T

• Grind: TGC (PCD)

• Hook angle: 10°

• Kerf: 0.087"

• Arbor: 5⁄8"

ORDERING INFORMATION

■ INTERNET: www.grizzly.com® Shop online 24 hours a day. It’s fast, easy and secure. Visit often since we have many specials and discontinued items not offered in our catalog or retail stores.

■ FAX 1-800-438-5901: You can fax your order directly to us.

■ PHONE 1-800-523-4777: Call our toll-free number between 8:00 am – 8:00 pm, Mon – Fri or 8:30 am – 6:00 pm ET on Saturdays to speak with a salesperson. Or leave a message after hours. Follow the voice prompts to place your order.

■ SPANISH: Hablamos Español - Llámenos al 1-800-523-4777.

PRICING POLICY

Due to rapidly changing market conditions, our terms, conditions, pricing, and policies are subject to change without notice at any time, and are updated on grizzly.com® as necessary.

CUSTOMER SERVICE

SHIPPING YOUR ORDER: We make every effort to ship your order within 24 hours. Most orders go out the same day. Due to our centrally located warehouses, motor freight shipments usually arrive in 7–10 business days. Standard orders (non-freight items) typically arrive in 2–3 business days. This information should be used as a general guide and is not guaranteed.

NON-FREIGHT ITEMS: Non-freight items are assessed a shipping and handling fee based on the total price of the items. Due to size and weight restrictions, some items require additional shipping and handling charges. These items are individually noted. Orders that do not include freight items will be shipped by ground transportation unless otherwise specified. Shipments less than 1 lb. may be shipped by USPS or UPS SurePost. Orders shipped outside of the lower 48 U.S. states will be quoted at current shipping rates. Special handling costs or shipping fees may be added to your order, and all orders may be subject to a fuel surcharge. Shipping charges for some parts may vary from published charges.

SHIPPING AND HANDLING CHARGES:

(Non-Freight Items to the Lower 48 U.S. States)*

Item Total

$0.01–$14.99 add $7.99 $15.00–$24.99 add $12.99

$25.00–$49.99 add $16.99 $50.00 or more* ............ FREE!

We Ship Internationally! Order online or call 360-647-0801 option 6 for a no-hassle, allinclusive quote for shipping orders internationally.

*Oversize items do not count toward the free shipping minimum merchandise value and are charged shipping and handling. Oversized items are identified by individually assigned shipping rates located on their item pages.

*Gift Certificates do not count toward the free shipping minimum merchandise value and are not charged shipping and handling for standard shipping methods.

TRUCK FREIGHT ORDERS: We have a flat rate shipping program for most freight items so you know exactly what your cost will be. This applies only to the Lower 48 U.S. States. We have listed the shipping charge for each machine next to the price (a fuel surcharge may be added). Items under 150 lbs. may ship by small parcel carrier. See inside order form for an example of how to apply this change to your order.

Orders that contain freight as well as additional S/H charges due to oversize restrictions and non-freight items must include the flat rate shipping fee per item and the S/H fee based on the total dollar amount of those non-freight items. All orders may be subject to a fuel surcharge.

Truck freight orders require a delivery appointment and we require a valid daytime phone number in order to complete delivery. Truck drivers are not required to give assistance unloading. Please be prepared for this “curbside” delivery, as you are responsible for unloading the item(s) and placing them in your shop. This normally takes a couple of “friends.” Your location must be tractor-trailer accessible. Some carriers reserve the right to charge a limited access delivery fee, which will be added to your invoice if applicable. If you need assistance unloading or moving your shipment into your shop or home, special delivery options are available for an extra cost. We offer liftgate service for a discounted rate on most machines.

SHIPMENTS OUTSIDE THE CONTINENTAL U.S.: Orders will be quoted at current rates. Items will be shipped via the most cost-effective service. Special handling costs, additional shipping fees and applicable brokerage fees may be added to your order.

BACKORDERS: If not specified, out of stock items will automatically be placed on backorder and shipped immediately when available. Credit cards will not be charged until item(s) are shipped.

SHIPPING DAMAGE: When you receive your shipment from the trucking company, it is extremely important to inspect and note any damage that might be suspect. If you notice holes, dents, tears, etc. you must open and inpsect the contents to ensure the product is not damaged. Notate all damage on the form or tablet used to sign for delivery. These notations will allow us to make a claim for shipping damage on your behalf. Failure to do so makes it extremely difficult to make a claim. If there is shipping damage and you have noted it, you may submit an online ticket to our Customer Service Department, or call 1-800-523-4777 or fax us at 1-800438-5901. We will take care of all the necessary arrangements to have the problem resolved.

Scan to submit an online ticket to Customer Service.

RETURNS: Should you decide to return an item(s) for any reason, be it for refund, exchange, or warranty, please call 1-800-523-4777 or submit an online ticket to our Customer Service Department. We will take you step by step through the return process. Returns for refund or exchange must be within 30 days of purchase. Original shipping and handling charges are not refundable. All returns must be in original packaging, unused and in resalable condition and all non-defective returns are subject to a 10% restocking fee. The restocking fee may be waived if items are exchanged for product of equal or greater value. All merchandise must be shipped to us using an authorized return label that we provide when setting up your return. We will not accept returns sent to us without prior authorization.

TECHNICAL SERVICE AND PARTS: Please contact our Technical Service Department at 1-570-546-9663 Monday through Friday, between the hours of 8:00 AM–6:00 PM ET before sending or bringing any item back for service. For machinery, please have your serial number available. If it is determined that the best course of action is to send the item back to us for service, we will make every effort to repair and return it to you in a timely manner. You may also call this number to order parts or visit our parts store online

Scan to order parts online.

DARN IT! We make every effort to be exact with our photography, prices, specifications and copy. Sometimes errors do occur and we apologize for them. We reserve the right to make changes and correct errors at any time.

PRIVACY POLICY: We respect your right to privacy and do not disclose your personal data to other organizations.

CREDIT TERMS: We offer credit terms to qualifying companies and government entities; apply for an account online at grizzly.com® Terms and Conditions contained in customer purchase orders, order forms, or otherwise are superseded in their entirety by our terms as stated on our website and herein unless expressly agreed to by us in writing.

FINANCING: We offer financing for individuals and businesses. For individuals, we offer Affirm Financing on grizzly.com® during checkout. For businesses, we offer financing through Clicklease. Visit our website, call 1-800-523-4777, or scan the code for more information on Clicklease.

Scan to apply for business financing through Clicklease.

LIMITED WARRANTY

Grizzly warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs, improper wiring, alterations, lack of maintenance or consumable parts. This is Grizzly’s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent that our merchandise complies with the provisions of any laws, acts or electrical codes. We do not reimburse for third party repairs, services, or any expenses related to moving machinery to and from carrier vehicles or residences. In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.

• We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special or consequential damages arising from the use of our products.

• To take advantage of this warranty please call our Customer Service Department at 1-800-523-4777. Proof of purchase must accompany the merchandise. Manufacturers reserve the right to change specifications at any time as they constantly strive to achieve better quality products.

• Please Note: Merchandise covered by a manufacturer’s warranty must be sent directly to the manufacturer for repair or replacement.

CALIFORNIA COMPLIANCE SURCHARGE

Our carriers have started to assess a surcharge to cover increasing costs for regulatory compliance for shipments into California. The current surcharge of $15.00 for freight shipments will be added to all California shipments. Orders with freight and small parcels will only incur the freight surcharge. This surcharge is subject to change. Please see grizzly.com for updates.

CALIFORNIA PROP. 65 INFORMATION

Some products shown in this catalog can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

WARNING! †1

WARNING! †2

WARNING! †3

: Cancer & Reproductive Harm - www.p65warnings.ca.gov

: Cancer - www.p65warnings.ca.gov

: Reproductive Harm - www.p65warnings.ca.gov

Shaper Cutters

Circular Saw Blades