GTX335 Next Gen ADS-B
GTR225A VHF
OutTransponder
The GTR 225 series COM transceivers include
The GTX335 providing the simple upgrade path for
a breadth of new features
thousands of aircraft
Offering affordable feature-rich navigation, stunning display, streamlined data updating.
G3XTouchDisplay Is the smartest, most advanced large-format flight display, designed specifically for experimental/amateur-built aircraft. FS
GARMIN
z
ERAS
m
a
eMTUTTT Dacoal 1101 Pa
a smart and
sophisticated watch with a premium titanium band, wrist heart rate and more.
Visit our website to see our full and comprehesive range of aviation products
+44 (0)131 447 7777
EDITOR’S DESK
By Brian Hope We can only hope that Brexit and the popularist immigration agenda that it unfortunately brings with it, will not impose limitations on inter-European travel, because whilst we have certainly won out on medicals, heading off into Europe in your light aircraft has become ever more complex over that same 20 year period. We must be on our guard. | am confident the GA organisations will continue to work together to safeguard our privileges; as members we too must be prepared to do our bit when asked —apathy never won anybody any prizes.
T= end ofanother year israpidly approaching so may | wish each
and every one of you a wonderful
Christmas and a happy and safe New Year. It is traditionally a time for both reflection and looking to the future, | hope you managed to fulfil many of your aviation aspirations during 2016 and the year ahead enables you to enjoy recreational aviation as much as you hope and dream.
We are certainly experiencing a time of change, not only in aviation but in life in general. The new Self Declaration Medical will, after its rocky start, be quite a godsend to a lot of pilots. We have to remember that it is not that long ago when, if you could not attain the Class 2 standard, your flying days were finished. The interim NPPL Medical Declaration
was of course the game changer, but moving to an even simpler system is something that few of us would have ever thought possible only 20 years ago.
This month’s cover feature is the Chrislea
Skyjeep, a replacement for the company’s Super Ace which had a ‘non-standard’ control system which, it was claimed, would enable a non-pilot to learn to fly in a much reduced timescale. Needless to say, a steering wheel that turned left and right for ailerons, slid left and right for rudder, and moved up and down for elevator, was not well received. The Skyjeep
variant was to be the company’s salvation, it featuring normal stick and rudder controls, and a taildragger undercarriage to replace the tricycle gear of the Ace. Unfortunately, it too found very few buyers, and by the early fifties the company had, as so many others had in
post-war austerity Britain, folded. It would be remiss of me not to mention my
appreciation to everybody who has helped
keepLightAviationwhat| hope you agree is an interesting read. Regular and oneoff contributors, the
LAA staff, the ever-
helpful guys and gals at Seager Publishing, our photographers and so many more. You all Know who you
are so please take a well-deserved bow.
Have a good one!
THETEAM KCVO, FRAeS
Chief Inspector: Ken Craigie Engineering email: engineering@laa.uk.com
President: Roger Hopkinson MBE
COMMERCIAL
Vice President: Stewart Jackson
Email: office@/laa.uk.com
Chairman: Brian Davies
Office Manager: Penny Sharpe
CEO: Stephen Slater Chief Engineer: Francis Donaldson, B.Tech C.Eng FRAeS
Head Office: Turweston Aerodrome,
Patron: HRH Prince Michael of Kent,
Nr Brackley, Northants NN13 5YD
LIGHT AVIATION MAGAZINE
Editor: Brian Hope, 60 Queenborough Road, Sheerness, Kent ME12 3BZ Tel: 01795 662508
Email: BFJJodel@talktalk.net
Tel: 01280 846786
DECEMBER 2016 | LIGHT AVIATION 03
6 NEWS Latest on 8.33 radios, Tatenhill to open cross runway, Warner radial goes back
iNproduction
|0 PROJECTNEWS An electric SSDR and the completion of a Van's RV-10 are among the aircraft featured this month
|6 HAHNWEIDE OLD TIMERS Nigel Hitchman’s entertainingand informativephoto report from the top German classic aircraft event
22 NEW ZEALAND A tale of two trips to New Zealand, enjoyingthe flying and sightseeing
26 ENGINEERING It's not all nuts and bolts, there’s
paperwork to get right too! Francis Donaldson explains best practice for aircraftlogbook record keeping 30 LAAAGM DAY This year’s new format for the
AGMDaywasconsidered a bit hit, according to all who attended. Brian Hope reports 32 TECH TIPS Serial builder Dudley Pattisonpasses on some building advice
34FLIGHT TEST
Another interesting rarity, the Chrislea Skyjeep, is flown by Clive Davidson
44 LANDING VOUCHERS Henstridge, Sherburn and Shobdon offer free or discounted landings this month and £2 off entry to the Midland
s | am writing this, Storm Angus has just
have to deal with the UK CAA
the weather forecaster is talking about
national assets
Areethrough the south ofEngland and
All GA airfields are granted protected status as
rainfall in centimetres, not millimetres, so it looks
as if flying from my local strip has come to an end for the year.
So what is there to look forward to in the coming months? The Flyer Live show at Telford is pretty weather-proof and | am booked on the LAA stand, so that should be interesting. | always enjoy meeting old friends and new faces. And what else? Ah Christmas! Being part of a lazy family we always draw up a
be fun to draw up
personal list: Night/IFR for permit aircraft finally approved The first jet powered
issues to cross the LAA’s desk
54 MEET THEMEMBERS
We've all heard of Dudley Pattison but did you know he was born on D-Day? This and other mysteries are revealed...
60 LAA SHOP
LAA aircraft is
approved Farnborough airspace proposal is resolved in favour of
GA, and the regulators accept that our airspace is for all users, not just one sector of aviation
All ‘orphan’ aircraft Owners Can choose to
Get your orders in now! You know
transfer to an LAA permit
your partnerwants a new flight guide
system
for Christmas
Remunerated training is allowed in LAA permit
63 LAA CLASSIFIEDS
aircraft
Aircraft, parts and services for sale
66 CEO THOUGHTS Steve Slater looks back over 2016 — and ahead to next year
Christmas. Brian Davies
buying presents. Maybe it would
46 STRUTS4U
48 SAFETY SPOT Malcolm McBride on the latest safety
wish list? | hope you get what you wish for this
Christmas wish list to
an LAA Christmas wish list? Here is my
calendar of their upcoming events
Some of these wishes will come true but |
suspect some never will, but that’s what wishes are. What would you put on a LAA Christmas
make life easy when
Air Museum
News from LAA Struts and a
Global warming results in guaranteed good
weather for future LAA Rallies.
Post BREXIT, the pilot licencing rules allow a UK licenced pilot to fly any UK registered aircraft in UK airspace after May 2018 Also post Brexit, we only DECEMBER 2016 | LIGHT AVIATION 05
PLENTY MORE NEWS IS AVAILABLE ON THE LAAWEBSITEAT wwwilaa.uk.com
LATEST NEWS ON 8.33 CHECK ITOUT EVERY DAY!
The owners 8.33kHz communication as months yet New unspecified toradio must Year runre-equip until or marks torestrict about frequencies aircraft just with radio seven 12 an
equipment mistake, it will is fitted be illegal to andtothe use other than the small number
of frequencies specified by the CAA. | have heard that the
Netherlands are talking about €2,000 fines for the continued use of 25kHz equipment —food
on their current 25kKHz
equipment for a ‘temporary’ period. The specified frequencies are likely to include the emergency frequency of 121.5 and perhaps SafetyCom and the gliding frequency. Whilst this will help
for thought that UK and other EU States may be similarly inclined.
benefit to those who regularly fly
Happier news is that the CAA is finalising the Transition Cost Funding Redemption Scheme, which will provide up to 20% of the cost of radio equipment and fitting, funded by €4.3m
cross-country, so if you haven't
secured from the EU.
some owners, it is of limited
yet equipped with 8.33 then I’m
There will be conditions to
afraid you will soon need to start
receiving this CAA funding. Amongst those known to be
thinking seriously about doing so.
There has been much debate
about using a 25kHz radio post January 1 2018 but make no
finalised are that the owner must have an Aircraft Radio Licence for the aircraft the
Radio Licence.
of Hand-held radios will also
Station License holders are not
be eligible and must have an Aeronautical Transportable
Scheme.
Radios used by Ground included in the Redemption
CRETE2CAPE CORRECTION
al
MROig ci.
equipment must be ETSO, TSO or LA3-approved. Owners
ee
| mentioned in the last magazine that Henry Labouchere would be participating in the Crete to Cape Rally in his Tiger Moth, but he | dropped However,me he aline had recently to say that been hetohad Megara withdrawn Base from (nearthe Athens) event.in
Greece, where he had been working all week on a couple of Tigers, one from Botswana and another from South Africa (pictured below) on which he had to change the entire top end so that it could make it to the start of the event in Crete.
Meanwhile the indefatigable Maurice Kirk set off late from the UK in his vintage 65hp Piper Cub for Crete, and has subsequently caught up with the rest of the group. He made the news when he was shia, Ue
reported ‘lost’ between the Sudan and Ethiopia but at time of writing | reported he was back that with the authorities the group at were Gambela, preventing Ethiopia them where from continuing. it was
PIPISTREL TEAMS WITH CHINESE COMPANY Slovenian company Pipistrel has signed a long-term deal reputed to be worth €500m, with Chinese GA company Sino GA Group, for production of the Alpha Electro and Panthera Hybrid models. A new production facility with a runway, maintenance and training facilities will be built, capable of manufacturing 500 aircraft per year. Pipistrel will also be developing a zero emission 19-seat aircraft using hybrid electric technology and hydrogen fuel cells, as part of the deal.
OLD SARUM TURNS 100 2017 sees Old Sarum Airfield, Wiltshire celebrate its centenary and they will be celebrating from the very start with a fly-in on January 1, with a commemorative stamp for your logbook. The airfield, including the Skies Café, will open at 10am and close at sunset. At 10:30am
you are invited to watch The Great Waldo Pepper movie, and at around 12:45pm they will be showing 633 Squadron. If you live in the south and the weather plays ball, you could visit a quartet of New Year’s Day fly-ins at Popham, Old Sarum, Compton Abbas and Henstridge. 06 LIGHT AVIATION | DECEMBER 2016
NEWS WARNER RADIAL BACK IN PRODUCTION When Monocoupe Aeroplane Corporation
introduced a kitoftheclassic1930sClipWing Monocoupe, research for a suitable powerplant took them to John Duncan, owner of the Warner
Engine Co, LLC. “We knew that the perfect choice would be the seven-cylinder radial Warner 185, which was rated at 200hp for take-off and 185hp constant at
just 2,175rpm,” said John Worm of MAC. “With today’s modern technology, better materials, using higher compression and fuel octane and the addition of fuel injection and electronic ignition, we project the 555 cubic inch radial will produce in excess 275hp.” A joint venture will see the engine back in production after a break of 70 years.
MORE FRENCH
CUSTOMS CLOSURES Pilots who regularly fly abroad will recall that the number of airfields
where they could clear Customs and Immigration in France was reduced in 2011, in a cost-cutting exercise by the French Government. Unfortunately, another 13 fields have fallen to another round of
cuts, and they include Amiens and Abbeville, although the latter is fighting the decision and at time of writing were still available for Customs. Le Touquet and Calais appear for now, to be safe.
The list of designated French Customs airfields can be found
here: http.//bit. ly/2goXzoz
TRUMP THAT! Pilots in the New York area were
morethanalittle upsetwhen, almost as soon as Donald Trump became US President elect, a
Temporary Flight Restriction was placed over his home, Trump
COLIN HALESENTERSJAPAN RUNWAY 04/22
Tower on Manhattan Island, that
Better news at
last for Rand
Tatenhill Aviation and volunteers from East
the Hudson River VFR Corridor.
KR2 flying-
Staffordshire Flying Club based at the airfield are working to reopen runway 04/22, which has
Initial complaints lead to the TFR being reduced in size but it created only a very small access lane to the
was so large it blocked access to
round-theworlder Colin
been out of use for around 10 years.
Hales, who had been stuck on
the ground at Yuzhno Sakhalinsk in Russia for several weeks,
VFR corridor and raised concerns
of tailwheel aircraft in recent years. Neil
reduction has effectively allowed complete access, although there is speculation that the TFR, originally intended to remain in place until January 21, the day after Trump is inaugurated and moves into
Houghton, chairman of ESFS, commented,
unable to get permission to enter China. It was looking for a while as though Colin would
“We now have several LAA aircraft that are not
tolerant of crosswinds and struggle to make a safe landing when there is a crosswind on our only runway, 26/08. “Recognising the problem, it was decided that
have to leave his aircraft in Russia and return
in the Spring, as winter weather swept in and temperatures fell to -11°C. Finally, with the help of many new friends in Russia, he was able to get permission to enter Japan. Strong winds and rain hampered his journey, and caused damage to his prop, but he has now arrived in Japan where the temperature is a much more satisfactory 12°C. In a brief report, Colin says he is indebted to the Russians for their help and is now able to continue with his journey. He is pictured above with the director of Yuzhno Sakhalinsk airport who, as a gesture of goodwill, waived all charges incurred during his stay.
The move has been instigated due to difficulties being experienced by an influx
of mid-air collision. A further
the White House, will now remain
| the members of ESFC could lend assistance in
much longer as he is expected to
clearing the abundance of weeds and bracken
continueto spend alot of timeat FULL ancien om Keiuce SUTTON FLY-IN
that has built up since the runway was closed.”
|
After clearing the growth, the tarmac was found to be unserviceable so it is being | removed to leave the original concrete which is in good condition. It is hoped that the repairs will be completed for a 500m x 20m runway to | be re-opened by the end of the year. Well done Tatenhill.
An early date for your diary! The Vale of York Strut and the airfield
owner are planning what it claims will be the northern event of the year at Full Sutton Airfield on
HENSTRIDGE OFFER Particularly pertinent following all the rain we have had of late, is an offer from Henstridge Airfield for owners based on fields likely to get waterlogged, to avail themselves of free tie-downs at Henstridge from December till March in order to keep flying. The airfield is also offering free landings in December and free tea and coffee from
December 26 to January 2, plus discounted fuel (call or see website for price details from
December 2).There’salso a fly-inon New Year’s Day with bangers & mash with onion gravy or beans, all for only £5.00. Please note the airfield will be closed on Christmas Day. Please email mail@gp-services.net for further
NEW DRONECODE LAUNCHED ON
DRONESAFE.UK On November 24, in time for Chrsitmas,
the CAA in partnership with NATS, issued a revised Dronecode to help the many people receiving a drone this year to fly safely and responsibly. The Dronecode is a simple set of rules and guidelines, established in legislation, which outline how to fly drones safely andwithin the
August 12/13 next year. Car, motorcycle and other interest groups will be invited to attend,
camping will be permitted and food will be available during the day and evening. Live entertainment and prizes will be awarded for meritorious flights and worthy Elceigclie
All proceeds will again be split between the Yorkshire Air Ambulance and the Spirit of Goole Build-a-Plane project. The number of LAA types at Full
law in the UK. It is hosted on a new dedicated
Sutton is growing and the Strut is
www. Dronesafe.uk website. Thisinitiativeis
now based there. There are now 14 resident LAA machines and that
backed by a wide rangeof leading aviation players, drone retailers and manufacturers, and the Dept for Transport.
Office details. www.henstridgeairfield.com closed from December 23toJanuary 3ne
looks set to grow further as there are
plans to erect a number T-hangars.
NEWS
ROTAXTHEFTIDEA Tony Palmer of Bristell UK has suggested an idea that may be useful in deterring, or at least the tracing of stolen Rotax 912 engines. He writes: “I realise how easy it is for people to steal an engine and either change the rear casing over from a scrap engine complete with engine number, or change over the riveted nameplate. However, each crankcase has an individual serial number which is engraved into the metal and this would take a lot more effort to change without it being obvious, i.e. if the number has been ground off and re-stamped. Can we get everyone who has a Rotax 912 to add their crankcase number to
their engine logbook please?”
Pees eyetage)
vents are few and far
hard runways as their grass
year but there are a few
manoeuvring areas can become impassable. If you are organising an event,
- between atthis time of Christmas and New Year fly-ins that, weather permitting, will be
let Dave Wise know at
fun to attend. The amount of rain
dave. wise@btinternet.com
we've had of late won't help, so please do check that fields are still operating, even those with
so that he can include it in the Royal Aero Club online events listings. ro)
i)ar|S esre
2400
SS
6
2 ist
Paes 5
ay a
OS
TE5)
Stow Maries New Year
International Centre, Telford Flyer Live
Fly-in [PPR] Compton Abbas New
3
Compton Abbas Christmas Fly-in
Exhibition
YearFly-in
[PPR]
Henstridge NewYear
8
Yeovilton FAAM
Fly-in. Bangers and
Cobham Hall
Mash £5
Workshops Tours
Old Sarum New Year
Popham New Year Flyin 01256 397733
[pre-book]
Fly-inand Films 8
Bicester Sunday
Shuttleworth
ScrambleClassicCars
Workshops Open Days
& Fly-in [PPR]
8
Hallmark Hotel Croydon Airport Collectors Fair
THE FOLLOWING DATES and locations are listed for a GASCo Safety Evening. Safety Evenings are usually open to all visitors whether you are associated with the club or airfield holding the event or not, so please don’t be afraid to call the organiser for details. Check the GASCo website at www. gasco.org.uk/safety-evenings.aspx for details of the exact locations, start times (usually but not always 19:30) and contacts.
Dec6
Wickenby
Mar6
Jan |! Jan |!
North Coates Andrewsfield
Mar 9 Shobdon Mar 15 Crowfield
Jan 12
Sherburn-in-Elmet
Mar 16 Cambridge
Feb6
Enstone
Mar 3!
Coventry
leaders in experimental and light sport avionics. SkyView HDX features improved displays, beautiful design, unrivaled control ergonomics, and an
upgraded touch interface. THE UK & EVUROPE'S AVIONICS
SUPPLIER
For complete specification and pricing, please contact:
Lee-on-Solent
Feb 6__ Bristol Airport
Apr 4 _—Snitterfield
Feb 6 Feb 20
Apr !5 Barnaldswick, Lancs. Apr 25 Liverpool
Newquay Airport Sandbach
bd Fs ast
ANUARY 201
2-3
Old Warden
a
oe
(HDG) “PFD ENGINE”
29-30
KELN 118.3754sos
Learn More at
www.dynonavionics.com 08 LIGHT AVIATION | DECEMBER 2016
LAA 70
n Monday 24 October, just two days before the actual date of the 70th Anniversary of the Association’s formation,
“A new trophy —the Prince Michael of Kent
88 members and spouses, or
partners, sat down to dinner in the ballroom of the RAF Club in London’s Piccadilly in the presence of our Patron, Prince Michael of Kent.
Amongst other distinguished guests were our President, Roget Hopkinson, our Chairman, Brian Davies, two distinguished former presidents, Sir lan Macfadyen and Sir John Allison, and several of our longest serving members. It was a memorable evening in a superb setting. Brian Davies spoke of the debt of gratitude we all owe to our founders and our past and
present volunteers, and he acknowledged that almost certainly all of those members present fell into the latter category. He thanked Prince Michael for his great interest in the Association and our warm appreciation that he continues to take on the role of our Patron.
He welcomed Tony Rapson, CAA’s Head
Trophy —presented to Alan James”
of GA, and said how much we appreciated the Authority's refreshingly open and helpful approach to our members’ type of flying, reflected in our newly approved exposition with its wider scope, and the relaxation of required medical standards for a simple PPL. Brian went on to congratulate Roger Hopkinson, our President, on the recent award
gains had been earned on Roger’s watch and that Sir John’s Medal had been earned by much more than the 10 productive years he'd spent as our President. Our Patron said how pleased he was to be able to be with us on this auspicious occasion and of his pleasure and enjoyment in watching our progress. He had recently given the Association a new trophy —The Prince Michael of Kent Trophy —to be awarded to the best presented aircraft at our annual Rally. He then made its inaugural presentation to Alan James for his superlative Isaacs Spitfire. Finally, lvan Shaw gave a witty, amusing and interesting talk on his time as a teacher and as an aircraft designer, in both of which roles he was clearly a great Success. In addition to the loyal toast, glasses were raised in a toast to our founders and absent
friends, and a third toast to the future of our
Association. Those present will be able to recall
of an MBE, and our past President, Sir John
a most enjoyable and fitting celebration of the
Allison, on the award of a Royal Aero Club Gold Medal, acknowledging that many of our recent
remarkable achievement of seven decades of
affordable, fun flying.
LAA Patron, Prince Michael of Kent,
presents The Prince Michael of Kent Trophy to its first recipient, Alan James, for his superb Isaacs Spitfire.
DECEMBER 2016! LIGHT AVIATION 9
PROJECT NEWS
O ne of the many highlights of this year’s Rally was the
seven day build a plane challenge. There was an excellent article in the October 2016 edition of Light Aviation covering the build and maiden flight and you can
also find a link to an excellent video of the construction on the Association's website.
The aircraft actually belongs to a customer and her owner, Lucien D’Sa, has now had the aircraft painted and tells us a little of his story. There are currently two Sling 2s and one Sling 4 being built in the UK. Committed builder, Michael Clarke, reveals how he moved house
to progress his sizable RV-10 build, swapping a double garage for a smaller house that came with a couple of cow sheds. And something completely different, designer and builder David Skill has sent us an update on his electrically powered Voltair 86 SSDR. In the Cleared to Fly list, | notice Stampe G-AWXZ making its way onto an LAA Permit to Fly. This gives us a real celebrity in our midst, being probably the most filmed aircraft in the history of the movie and TV
industry. Immediately after overhaul in the late 1960s she went straight to work on a Jade East aftershave commercial with the late,
great Neil Williams flying her. Following on was a continuous flow of around 50 productions, some major, such as Aces High, Indiana Jones and The Last Crusade, The Mummy and The High Road to China. TV commercials have been endless, everything from chocolate to watches, baked beans, yoghurt and all types of drink products. She has been converted many times into an SE5, Fokker D7 and variations of spurious WW1 and 1920s disguises. Look out for her at Booker.
So, as the forthcoming holiday season approaches may | extend my thanks and best wishes for a wonderful New Year of flying and building to all the contributors to Project News, the column would not exist without your support.
To get in touch with Project News to tell your story, report a milestone or
G-LDSA(LAA BYLUCIEN 400-15412) just D’SA tosend SLING apicture, 4email: projectnews@laa-archive.org.
IT WAS a dream to build my own aeroplane but the sheer amount of time it takes to complete one put me off the idea. So, you can imagine
my surprisewhen| readin LightAviationthatTheAirplaneFactorywere planning to provide an opportunity for amateur builders to share in the building of a four-seater Sling 4 in seven days in the UK, during the Sywell rally. | had read reviews of the aircraft and | particularly liked its good looks, but the Sywell project would be the ‘first of type’ in the UK.
As timewasshort,| booked a flight and spenta longweekendlooking over the factory just outside Johannesburg. After my first flight in the demonstrator Sling 4, | decided on the spot to join the team building the seven day project, and negotiate to assume ownership of the aircraft once it had done its job of satisfying the authorities of its airworthiness.
In reality, the deal was done on a handshake with James Pitman whilst flying back from Lesotho. Apart from the appearance and flying characteristics, the choice of avionics was very important to me as the intention was to go for IFR/ Night approval under the new rules which will hopefully very soon apply to Permit to Fly aircraft. Working closely with the factory, the panel was designed incorporating the latest Garmin instruments and replacing the customary standby ‘steam gauges’ with an electronic Standby Attitude Module. | believe G-LDSA is one of the best equipped light aircraft in the United Kingdom.
SeetheOctober2016issueof LightAviationfora detailedaccountof the build and maiden flight of G-LDSA.
PROJECT NEWS
G-CHTX(DRS-01) VOLTAIR 86 SSDR BY DAVID SKILL AS A rather unique example of an electrically-powered single seat deregulated aircraft, the Voltair 86 was featured in the December 2013 and January 2014 issues of the magazine. Suffice to say that the necessary modifications, adjustments and trials to get the aircraft airborne have been numerous and costly. The ‘tests’ are best referred to as ground trials, for reasons that will become more obvious later, but these many trials accumulated a log total of approximately six hours, mainly because ‘switches on to switches off’ is often a short period for an electrically driven ‘green’ machine. The motor is off when waiting for traffic, and there is no warm-up time, and indeed no pollution and little noise. All 40-plus trials were recorded in an article | was going to submit as Part 3 of the build saga but they would bore the pants off even the most ardent enthusiast. The trials were invariably carried out in groups, as many as possible in the best power pack operating range from 96v down to 72v. This gives a safe margin to return comfortably to the hangar for up to say, an hour's charging. Many short hops were achieved, some of them crab-wise, but on 11 July 2014 at 14:10 on runway 08 at Eshott, with a gentle easterly breeze, the aircraft flew straight and level at ‘zero’ altitude until achieving a three-pointer as the runway ended. Alright, it is not epic but three seconds at 40mph is quite a long way. Shortly thereafter, on the second run, the motor failed and further tests were aborted.
In the period prior to this event, major modifications included a redesigned tailplane assembly of 120 degrees inverted V configuration with a 70% increase in control surface area. This was to replace the former ‘box kite’ inverted tailplane which was found, in both static and field tests, to have adverse lift characteristics, resulting in poor pitch authority, which led to wheel-barrowing. Revision of the SSDR weight category at this time allowed for this change of flying/control surface with the beneficial weight penalty balancing a forward C of G. Together with an increase of wing incidence to 5.5 degrees and readjustment of the motor thrust line, the aircraft showed significant signs of improvement until the setback with the
motor. However, the manufacturer, LMC, kindly repaired the motor FOC and it was refitted by early 2015, when further trials took place. Last winter, repairs to the wing covering were found to be necessary after failure of the bond between the capping strips and the blue foam ribs, so further flight tests were put on hold. A daunting combination of minor injuries, then poor health, compounded by not being able to gain reasonable access to the aircraft because of vehicles, aircraft under repair, plant and equipment situated between my aircaft and the hangar door, etc, resulted in the loss of that essential ingredient for creative work —enthusiasm. Quite simply, because progress had been drastically curtailed by these events and with costs and benefits totally out of balance, the Voltair was grudgingly dismantled at the end of August 2016, and shipped back to my home workshop. It is pleasing to report that many interested visitors and fellow aviators made complimentary remarks about this Alternative Energy Project. Valued fellow enthusiasts and family all gave their support, while others were inquisitive as to why it didn’t have a proper internal combustion engine. Well, that may be a very valid point now as it is intended to remove the electric motor, power pack and electronic controls for use on an electric motor-trike, or similar, thus leaving a sub-80kg airframe for further experimentation. The airframe may be of interest to an educational organisation or group, in which case the owner might consider offering it as a donation. For someone wishing to experiment with the installation of an internal combustion engine, the Voltair could be made available together with another three-axis SSDR aircraft, a Monofly restored by Harry Smith and fitted with a brand new 33hp Simonini Mini 3 engine, with less than two hours’ flying time. These two aircraft will be situated in Harry Smith's hangar at Fishburn Airfield for anyone wishing to view and it is hoped that the project will be taken to a further stage of development. If you are interested to receive details and specifications, | am sure Project News will be happy to forward your email.
DECEMBER 2016 | LIGHT AVIATION 11
PROJECT NEWS
G-MCLK(LAA339-15041)VAN’SRV-10
BY MICHAEL CLARKE suppose my story is very different to
many of you reading this magazine —formative years of Airfix models, balsa, doped tissue and hree-quarter cc diesel engines. | suppose it took a while to realise that there wasn’t a
imit in size - in a highly regulated field an individual can still build a full-size aeroplane for hemselves and ultimately fly it anywhere in the world. A real privilege. So for me the desire to build was always here, but there are many challenges on one’s ime and such ideas went on the backburner. t wasn't until a chance visit to John Mitchie to see his RV under construction that the build idea started for real. | selected the RV-10 as |
might only build one aircraft in my lifetime, so it would be exactly what the mission needed loads of payload. Why metal? Given existing skills, wood would have been a natural choice but where is the
fun in that? | was set against modern materials such as fibreglass, probably attributable to helping my brother with his canoe back in the day. Nasty stuff. There was no chance of getting my wife into something fabric covered, but to be honest, | went for metal as a new
great aeroplane.
It seemed a bit rashto launchintosucha project without at least seeing a real aircraft — at the time | don’t think there were any flying examples in the UK, so Van’s put me in touch with Hugo in Florida. Off Marie and | went on holiday to the Florida Keys. | must have forgotten to mention the RV-10
double garage.
After a while it became clear the lottery plan wasn't working, | must have forgotten to buy a ticket on our week to win. It was a low point in thingand Mariewasmorethan alittle surprised the project. when we dropped in to an airfield and a few Then an engine came on the market, minutes later were overflying the Everglades professionally removed and inhibited from a with a guy she had never heard of before. She flying CofA aircraft by a well-reputed engine does tell the story differently, more eloquently man, good history, 1,000 hours. Just needed and with more passion, but the facts remain. some AD work. The kids’ piggy banks were Hugospenta lot of timewith us and passedon raided, the baby’s food ration cut and the deal lots of good advice which didn’t mean anything done. It gave the project some impetus and enthusiasm, but after a few months it became at the time, for example, order an extra pair of trim tabs with your empennage —you will mess clear that the cost of fixing it up and converting the first ones up. It was advice | didn’t take,
it to the standard needed for the RV-10 was
but fortunately | didn’t mess mine up, though it was a close run thing. Hugo also told us the engines offered by Van’s were a bargain. | looked at the price list and wondered about his sanity.
approaching the cost of a new engine. It sat sadly in the corner of the garage for a while whilst | contemplated hovercraft and air
boats,but in the end it wenton eBay —to be replaced eventually by one of those ‘bargain’ ones from Van's. Once you start down the
PROJECT PLANNING
Conventional! project planning tells you that challenge. Why Van's? Just look at the numbers. The need to plan every detail before you start — number of builders, the number of planes especially where the money is coming from. flying, the numbers in the specifications, the Well, it became clear that such logical and number of websites offering help and advice. conventional thought was going to mean | For a newbie it seemed route to a for final Michael’s RV-10 on its the waysafest to the airfield wouldn't assembly. have (Photo: a plane Michael until | was Clarke) too old to
12 LIGHT AVIATION | DECEMBER 2016
fly it. | had enough money for the relatively inexpensive wing and empennage kits, so the project was launched in the expectation of a lottery win. | started the build in an oversized
refurbishment route it’s a slippery slope —the price | paid was fair, but the engine wasn’t the right one for me. Lesson learnt and one up for Hugo. The empennage and wings went well, but it became obvious that the garage may have
been an ideal size for an RV-7 or 8, but not
PROJECT NEWS
RV-10 back from flight testing —graphics by Mirage Signs. (Photo: Michael Clarke)
The fuselage under construction in a corner of the refurbished cow shed. It was too big to fit a double garage. (Photo: Michael Clarke) DECEMBER 2016 | LIGHT AVIATION 13
PROJECT NEWS a 10 —the fuselage just wouldn't fit, even on the diagonal. So we sold the house and downsized. Some may think moving house extreme. “What about knocking the garage through to the living room like everyone else?”
“Just be sure before
you start that you really,
really, really want to
| hear you say, but in the words of one very
earlier aviator, Otto Lilienthal, “Opfer mUssen gebracht werden!” (Sacrifices must be made!). The move gave me a house to do up (later) but more importantly two cow sheds, one to build in and one as a spray shop; it all made he project seem achievable again. Cows are naturally curious animals, but these didn't show he necessary commitment to aviation and
had to go, as did the waste they left behind. With a new floor, lights and some paint | had a reasonably professional space to work in. Heating would have been nice, but gloves, hats and lots of layers sorted that out until | started on the fibreglass, then there was no choice but O invest in some propane heaters.
Painting was an interesting part of the experience. For the first assemblies | prepared and degreased the parts and took them toa local spray shop. Excellent quality of work, but it turned out expensive and as | batched up fairly large groups of bits it made the build process very disjointed. In the bigger premises | was able to set up my own crude spray shop, and | would really advise anyone building an RV to do the same. Air fed masks, spray guns
and compressors aren't cheap, but it will save a packet in the end. | chose ‘Ford Frozen White’ as my finish colour. | was accused of being boring by my mother, but it did allow me to finish paint assemblies as | completed them. It just felt the right thing to do. Avionics were surprisingly difficult —not how to do it, that’s reasonably straightforward —but deciding what | wanted. Initially | thought about a simple VFR setup to get me in the air quickly,
build, and then commit
fully. It will consume all your free time, and
probably all your money”
then update to glass later. It quickly became obvious that a later uodate would be very hard to do, so glass it is. | also fitted it out for what | anticipate will be an acceptable setup for night/ IFR —time will tell. | hope any corrections will be minor.
‘
AUTOPILOT PLACE
| know some of you will think there is no place for autopilot on a Permit aircraft. | disagree, the RV-10 is along distance fast touring plane, and modern tools to make it easier and safer get my vote. More time to look out the window at the
things that will really hurt you too. | can also tell you it is awesome, if initially slightly scary.
oT
De;
1 Beware of deviation from the plans. Personalising is a privilege and maybe why we want to build ourselves, but be wary. The LAA
mod system is great and yes, as long as it is safe you will probably get permission —but it adds complexity to the project, and complexity to design an aircraft and the instructions are awesomely accurate. If Van's says do something in a particular manner, there is probably good reason. Whenever | decided | knew better, an order for replacement parts nearly always followed. 2 The internet is a huge resource, use it with care. There are people out there who are incredibly knowledgeable, and others not so
The build continued at reasonable pace,
much. You will have to find out who’s who for
yourself, I’m not going to offer an opinion. You
bit years in total. You will find the details of the
also need to be aware that sometimes advice is
build process on no end of builders’ websites
contradictory, and often there is more than one right answer, that’s where you fit in. 3 Spraying, already discussed but having
so | won't bore you here. After a test assembly at home, the completed parts were moved to Tatenhill for re-assembly, final inspection andLs1 ry Pr] -oS d td = a Ld I
LhdDeron DYNON dl] AVIONICS
*
F ‘Fl\
cDOORS } P EMERGENCY
LOCATOR beeeliteRgrsp Writer aoe
Aarobdatc manceunres are prohibited
intentional spinning is prohibited
14 LIGHT AVIATION | DECEMBER 2016
new RV-10 builders? Just be sure before you
start that you really, really, really want to build, and then commit fully. It will consume all your free time, and probably all your money. So to advice. If you are anything like me you will skip this bit, but just in case, here are my top five, in no particular order, for RV building
fuselage, finish and then avionics. Five and a
Alternate
ia
by very, very quickly. High power cruising is essential for running in the engine, a big investment | am going to have to live with for a while, it needs to be done right. The downside of course is that as the test pilot Paul said, “This aircraft's favourite place is the pumps”. So what advice would | have for prospective
means time and money. Van's knows how
>
‘treed Static
excellent and the world beneath you passes
newbies:
i
Emergency
flight testing. Onwards and upwards. Initial impressions are that the handling seems
my own spray area, however crude, made the
build much more pleasurable. Buy and wear the right PPE (I used an air fed mask) —your lungs are worth it. 4 Balance. Back in the day | was working really late on a work project, a long run of late nights if | remember. A colleague from the other side of the desk asked, “You married
Mike?” in reply to my “Yes”, he jokingly asked, “What, still?” | have a lovely and extremely tolerant wife, not everyone's partner is likely to be so accommodating. In the information pack the LAA send you when registering the project there is a letter about keeping a balance. Read it. You are building for fun, keep perspective with your home life and, most of all, when it stops being fun take a break.
5 OK, it’s detail and very RV specific, but Van's will ship your seats to Oregon, or no doubt AeroSport or other aero upholsterers.
inwards inspector and storekeeper. You will understand VAT (and how to pay it - ouch!), import duties (and how to avoid them), end user numbers, deferment and tariff headings. Placing orders with US companies will become normal, as will tracking deliveries and dealing with import agents. Currency exchange rates will be watched with a new interest, and moving considerable
New Projects list, please let Project News know of your progress at: projectnews@
sums of money across the Atlantic will
emaICeiMliVsn Ore nel
@ VAN’S RV-7 (LAA 323-15434)
You will become your own certification
BE sya Ley /4tR is)
agent and, whilst | haven’t got to that bit yet,
Mr J Graham, 1 Huntley Close, High Wycombe, Buckinghamshire, HP13 5PQ
maintenance organisation. So what’s next for me? —that’s easy. | built
a touring aircraft, | am going to learn to fly it properly, and then tour. Channel Islands? Europe? Africa? Oshkosh? | am sure the
journey | have accumulated a few debts —so the rest of my free time will be spent doing the house up and returning favours to my riveting
| suppose anyone heading down the self-build route will appreciate the skills that are needed or need to be acquired, but looking back | don’t think | really appreciated the range. Obviously, there is the aviation equivalent of metal bashing (do go on the LAA metalwork course, in my opinion it should be mandatory for all new RV builders), paint spraying, fibre-glassing, avionics and
buddies! So to the credits. No-one wants an Oscars
style speech —“Firstly, | would like to thank my parents,” and so on. You all know who you are, and | thank you. That said, special thanks must go to LAA inspector Neil France and test pilot/CFl Paul Jones —not only acknowledged and professional top men in their fields, but also free with advice and great guys to have
(LAA 295A-15433) 7/10/2016 Mr J Edgeworth, 15 Teesgrange Avenue, Darlington, Co Durham, DL3 8DD
CLEARED TO FLY If your aircraft has featured recently in the magazine and has subsequently completed its maiden flight, Project News would like to
igioy-lanic@ leaele mele projectnews@laa-archive. org.uk
around.
Would | do it again? In the blink of an eye. Final words: Listen to the experience of those that have gone before you, but in the
electrics, but there are a lot of ‘softer’ skills as
end it’syourbuild,yourjourney,do it yourway
well.
—that’s the whole point. If my experience can help you with your project please drop me a
You will learn to be your own importer, delivery receptionist, truck off-loader, goods
m GLASTAR SPORTSMAN
planeis capable;the pilotwill need alittle
upholstery, don’t do what | did and have the bare seats shipped to the UK. The only winner
out OK.
lf your aircraft has been featured in the
flight manuals and modification applications.
more work. You may have noticed that on my
is UPS and the tax man. | had them boxed up
PROJECTS
become second nature. You will be author of
lf you want one of these guys to do the
and ready to go back but just couldn't click the button on the screen —fortunately | found a very competent guy in the UK so it worked
NEW
line. mwclarke@aol.com
m@ G-DANPVAN’SRV-7(LAA323-14941) m@ 27/10/2016 Mr G-ORVX London, DanielSW4 Pangbourne, VAN’S 9PX RV-10 40 Briarwood Road,
(PFA 339-14730) 13/10/2016 Mr Carl Meek, Darp Farm, Darp Lane, Ripe, Lewes, BN8 6BB @ G-TRLL GROPPO TRAIL
(LAA 372-15166) 07/10/2016 Mr Peter Grant, 10 The Sidings, Horncastle, LN9 SUA
(Photo Grant Peter 21) DYNON AVIONICS
Looking pristine after a successful first flight.
eTae @ G-AWXZ STAMPE SV4C
(s/n 360) 21/10/2016 Name & address held by LAA Engineering G-AWXZ at
Sywell in
July 1971
rane
@ G-CHXL VAN’S RV-6 (s/n 20960) 17/10/2016
Name & address held py LAA Engineering @ G-ELRT SOPWITH SCOUT
No Smoking
(s/n N6161) 04/10/2016 Name & address held by LAA Engineering m@G-GREC FALCO F8L (s/n 934) 21/10/2016
Name & address held by LAA Engineering
Hamb Richa (Photo
HAHNWEIDE
Early arrivals were treated to a fabulous display by Mikael Carlson in his 110hp Le Rhone rotary powered Fokker DR.1 at sunset on the Thursday evening. Mikael and his team put together the DR.1 and his 50hp Gnome Omega rotary-powered Bleriot XI Bleriot, an original built under licence in Sweden as a AETA (AB Enoch Thulins Aeroplanfabrik) Thulin A, during the day.
(Left) Friday is arrivals day with a constant stream of aircraft from far and wide, plus the start of the pleasure flights and a few practice displays. Always a highlight is the arrival of the formation of JU-52s. One
year we Saw all six airworthy examples in Europe, but this year with some down for maintenance, we just saw the three original Junkers JU-52s from JU-Air at Dubendorf, where they have been continuously operated since delivery to the Swiss Air Force way back in 1939.
af
:
-
They have been operated by JU-Air since 1983. One remained to do rides throughout the weekend, while the others took more joyriders back to Switzerland later in the day.
(Below) Anticipated was the only airworthy Bucker BU180 Student which has recently been restored, but this was unable to get here. The company was well represented though with two of the iconic aerobatic Bucker Bu133 Jungmeister and almost 20 of the two seat Bu131 Jungmann, some original inline Hirth powered examples, some Spanish built CASA 1.131Es with Tigre engines, and two Polish built examples with LOM engines.
16 LIGHT AVIATION | DECEMBER 2016
(Above) The 18th Hahnweide Old Timer Fly-in, held from 9-11 September, is a show like no other. It’s a fly-in for vintage aircraft but is also a vintage aircraft airshow with many rare and interesting aircraft you are unlikely to see elsewhere. The flying went on from 10am, before which everyone was allowed access to the aircraft parking areas. Nothing was rushed, and there were plenty of short gaps between the displays, but there was always plenty going on, whether it was the joyride aircraft coming and going, visiting aircraft arriving and departing, or the next aircraft being prepared for its display. Each day finished at dusk with the Blanix Glider Team with flares and pyrotechnics. Food and drink stalls were open from first light
until well into the night,andtherewasafriendly, relaxed atmosphere throughout the whole event. The Hahnweide Fly-in has traditionally been biennial, held every odd numbered year up until 2013, but a new volunteer organising team found much more work than they expected to put on the 2015 event, so it was put back to 2016. With
this year being such a great success, we are looking forward to another event in 2018, but await confirmation.
(Above) 1927 Klemm K1I25,D-EBMX, is the oldest original airworthy German aircraft, and it is powered by the oldest flying BMW aero engine. It was delivered to Switzeland in 1928 and purchased by the BMW Museum in 1978, but only in the last few years has it been restored to airworthy condition. An LED system has been inset into the propeller blades to display the BMW name and logo as it turns.
DECEMBER 2016 | LIGHT AVIATION 17
HAHNWEIDE
Antique Aeroflyers, at nearby Mengen, have a nice collection of mostly American vintage aircraft and brought several to the show, the highlight being a first appearance by this 1934 Kinner Sportster B-1, one of only two or three of these flying worldwide. They also brought a sleek Ryan STA NC17360, Curtiss Robin NC292E, a Morane MS317 and a Bellanca Cruiseair.
Two fairly rare visitors were these Schiebe SF23 Sperlings, D-EBYZ and D-EKYM. 27 of these steel tube fuselage, wooden wing two-seaters were produced by Scheibe, better known for their gliders, in the late 1950s. Most were powered by the
Continental C90 orO-200 butahandful used aSe
Jor soe ig0-235.
Acontemporary of the Jungmann was the Focke-Wulf.FW44 Steiglitz, powered by the same Siemens-Halske SH14 radial
engine as the Jungmeister, and there were no less than nine
exampleson thefield,whichmustbea record.A numberof these aircraft were licence builtin Sweden and used in the
Swedish AF post WW2, hence the healthy number of survivors. i :
They (Above) also Pilatus brought P-2s their used Pilatus to be P-3, commonplace which is in but unusual now you Brazilian rarelyAF seecolours, them, so and it was did anice fly-by to see of their this Fouga example CM170R operated Magister by Quax-Flieger. D-IKCC. The German Air Force operated 250 Magisters.
(Above) A nice selection of Zlins, including this early Zlin 126, OK-IFO, and the newly restored Zlin 526 G-AWUuX,originally imported to the UK in 1968, but now based in Germany.
(Above) On Friday and Saturday evenings the Blanix team performed at dusk in their pyrotechnique equipped L13 Blanik gliders. On Sunday the show was closed with a flight of a bugler in an old ex Air Cadets Slingsby T21. (Left) It was great to see two original Storchs at Hahnweide. D-EMAV is a 1944 Czech built Mraz K-65 and D-EKLU is a 1943 Fieseler built Fi156C-3 built in
the Fieseler factory at Kassel. It went to the Swedish AF where it remained until 1960, when it returned
to Germany. From 1976 it was owned by the city of Kassel and displayed at the Art museum, but when there was talk of sending it to a museum in Berlin, a local group 'Fieseler Storch Fur Kassel’ was set
up to take the aircraft on loan and restore it to flying
Hispano redesignated Suiza C36 C3605s was engine. Peay went Converted intoservice with 1afighter ainLycoming 1968 aircraft and T53 were for turbine the retired Swiss engine in1988. Airand Force used incondition. WW2, as atarget powered Itflew tug, by again the a in2011.
a
= ns
DECEMBER 2016 | LIGHT AVIATION 19
Hahnweide is primarily a gliding field and the fly-in is organised by volunteers from the Fliegergruppe Wolf Hirth, who operate the airfield, so it was no surprise that we were treated to several vintage glider displays. The morning flying started with the launch of around 10 vintage gliders, mostly towed by vintage aircraft, and there were several aerobatic displays including with the superb Habicht II replica flown by Christoph Zahn and built by his grandfather. The Habicht was originally designed by Hans Jakob in 1936 as an unlimited aerobatic sailplane and four examples flew aerobatics over the 1936 Olympics.
(Below) The Warbird contingent was mostly from Germany and France. There were three Yak 11s and two Yak 3s (pictured), two P51D Mustangs, locally based Louisianna Kid and Nooky Booky which came from La Ferte Alais together with the P40 and one of the Yak 11s. Stephen Stead’s Spitfire XVI, TE184, was superbly displayed by Dan Griffiths and also flew a two-ship formation display with one of the Yak 3s.
(Above) There were a few interesting vintage homebuilts, including this nice German factory built Stark Turbulent, one of around 35 built by Wilhelm Stark and one of the first aircraft approved for production in Germany after WW2. (Left) The intriguing LED display built into the propeller of the Klemme K125.
-ri4
~
al
One of the furthest travelled
was this nicely restored Cessna L-19 Bird Dog EC-MAB, which came all the way from Madrid where
it is operated as part of the Fundacion Infante de
Orleans collection at Cuatros Vientos. There was a Beech Bonanza that came even
further, from Iceland!
(Left) One of the warbird highlights was Karl Grimminger’s Hurricane 2B G-CBOE/ AG244. Restored in the UK, it didn’t do any
UK displays with the previous owner, but has been quite active since purchase by Karl, although only visiting the UK once for the Goodwood Battle of Britain event last
year. Karl also brought Fox Moth DH83C G-ACEJ, now owned by him and kept in Germany.
(Right) D-EBFW is a 1937 Messerschmitt BF108B,
painted to represent the company demonstrator D-IBFW. This is the oldest
airworthy Messerschmitt aircraft.
On Sunday evening for those that stayed the show wasn’t quite over yet, with plenty of the food and drink vendors still open and lots of
people relaxing after the show, at around 7pm we were treated to a fly-by from the Red Bull
CorsairandP38Lightning,followedbyafull display by the Lightning, passing by on their way back to base, a great end to a fabulous
all Great over tothe seeplace the Salis on landing. Collection ThisSkyraider, was the aircraft which made that was easy involved work ofinthe thebumpy collision runway with P51D conditions three Bigdays! Beautiful that bounced Doll atmany Duxford lighter in 2011. aircraft
DECEMBER 2016 | LIGHT AVIATION 21
y wife Diana wanted to visit
her friend in New Zealand. At
first | wasn’t keen, but then | remembered the Maoris
(Above) Milford Sound is a ‘must do’ if you are flying in New Zealand, here lan is joining overhead after an exhilarating descent through the mountains.
had christened New Zealand
Aotearoa, the Land of the Long White Cloud.
172N. He was fully booked all day, but we came to an excellent arrangement —| would take the left hand seat between passenger
assignments, mainly between Nelson and the Abel Tasman Park. On one return flight over the mountains from Karamea | was amazed, not to say alarmed, at the brutal steam-hammer
Asa gliderpilot| realisedthatcouldonlymean lenticulars —and wave lift. It was where Terry Delore and John Kokshoorn had completed a record-breaking flight of 2500km in an ASH 25 sailplane. Decision made, let’s go visit your
visiting local airfields. | was especially attracted to the Kapiti Island cliffs off the west coast of North Island. Have you ever tried hill soaring a
turbulence. Apparently, according to Vince,
Robin 2160 in a weak airflow? Well, at least it
friend!
was fun trying —and my efforts amused Dan.
After further flights to Takaka and the little grass clearing at Awaroa, Vince decided to
Di’s friend lives in Wellington, the ‘windy city’, and thanks to CFI Dan Howe at Wellington
Next was Motueka on South Island. Here |
head back into the mountains to make radio
met Vince D’Ath, a keen aerobatics pilot who
contact with his young fellow pilot to advise
International, | was soon in a Robin 2160
also runs an air taxi business with a Cessna
him to detour round the coast because of the
22 LIGHT AVIATION | DECEMBER 2016
Cessna claims that no C172 has ever suffered structural failure in the air...
(Below) only trip (Left) to by lan NZ. The air and or beach sea. wifeDi atwith BigBay, theC172 firmenough theyhired NEW to land on their on ZEALAND and second accessible flying
rapidly deteriorating weather conditions. As Vince headed up the mountain valleys in heavy rain and poor visibility, | caught myself wondering if the apostrophe in his name represented a missing ‘e’. | was reminded of the old saying, ‘There are old pilots and there are bold pilots, but there are no old, bold pilots!’ One practical tip came from Vince: “If you get caught in the mountains in near zero visibility, and all you can see is a glimmering segment of sky on the horizon, you can aim for it, but do remember to aim slightly high, always allow for the undercarriage!” You can imagine my relief when we finally burst back into clear air. Moral — never mix cloud and rock, even as P2.
Kaikoura is famous as a whale watching centre and our tourist boat took us quite close to several tail flips but, surprisingly, we saw the whales best in plan view from a PA28, and remarkably the sea was foaming with dolphins as far as the eye could see.
Driving south, we just had to stop at Omarama, the world famous gliding centre. It was not a good soaring day, or so | claimed as | landed out on my first flight! On a good day, they fly to the Southern Alps and Mt Cook, covering considerable distances. Omarama was the base for that 2,500km record breaking flight. While Di was walking the Milford Trail | met up with Chris Patterson, an instructor at
Christchurch International, and in two days | had 16 airfields in my logbook, including two
“lf you get caught in the mountains in near zero
visibility, and all you
can see is a glimmering segment of sky on the horizon, you can aim
for it, but do remember
to aim slightly high, always allow for the
undercarriage!”
international fields and Mesopotamia (yes, really). We crossed to North Island and pressed on as far as Napier, the town rebuilt in art deco style after the disastrous earthquake of 1931. | soon discovered why Chris had suggested Napier —after enjoying the generous hospitality of his parents we crossed back to South Island, benefiting from an evening convergence which
speeded up the return to Christchurch. This had been a fantastic taste of flying in New Zealand and | decided that next time |
would absolutely have to gain my NZ PPL(A) validation.
BACK AGAIN FOR A BFR
The following year found Di and me flying with Matt McCaughan and his team at Flyinn, where the flying and food proved to be equally amazing. The admin had been completed in advance by email and the Biennial Flight Review was a challenging introduction to flying with a difference.
Matt’s fleet consists of a C206 and two bright yellow C172s upgraded to Superhawk status with 180hp Lycomings provided by Penn Yan Aero, a US company. The extra power was to
prove useful, especially for short strips and paddocks. After fuelling up at Wanaka, home of the biennial Warbirds over Wanaka airshow, the
first destination was Glenorchy, famous for its jet boats. The following day, the weather looked
promising fora flightto Milford Soundin Fjordland. After an intermediate landing at
5
DECEMBER 2016 | LIGHT AVIATION 23
(Above) Emergency landing sites are few and far between in the mountains but the vistas are majestic. Te Anau, it was off into the mountains, our route
Milford Sound.
taking us high over Lake Quill at the top of the
Milford Sound is a truly spectacular scenic fjord airfield and is a honeypot for ‘flightseeing' tourist traffic. The circuit is defined by the near vertical rock faces of the surrounding mountains, time to concentrate. Impressed by photos, | had rehearsed this landing in my mind so often —and in the event | was pleased
famous Sutherland Falls.
photos show, life in the mountains is simpler —there are often no options —but in return the flying is the most exhilarating you could ever imagine. The tide was right for a landing on the beach at Big Bay. Hard sand -at least for the time being. We were introduced to a fully equipped large shack (including a tractor) behind the dunes, all of which had allegedly been flown in, bit-by-bit by 172! New Zealand is definitely a can-do country.
From our height of 8,000ft we had to descend within the tight basin of surrounding mountain peaks right down to Lake Quill. | soon discovered that tight turns restrict your options ~ far preferable to relax and fly the contours, with it. leaving more reserve of control. Like the water, we had to slip over the outlet to the Sutherland Thanks to my gliding experience | always Falls and then turn sharp right down the valley, keep a good look out for landing options, losing height rapidly for sand a over sea and level landing at of slipping checking for the size,outlet slopetoand As the (Above right left) Descending The clean Lake pure Quill waters before the Abelover Tasman Park. thesurface. Sutherland Falls and turning Returning sharp through rightthe enmountains route to Milford. to Wanaka
24 LIGHT AVIATION | DECEMBER 2016
Experiences. A daylaterweheaded forhome,
NEW ZEALAND
|= Se
(Above) The sheer tranquillity and beauty of the sea and the mountains is breath-taking. via Mount Aspiring, we saw fighter jets down below, scudding around, darting through
back across the sea, this time in perfect visibility. We intended to refuel at Balclutha,
mountain passes like fish on the sea bed.
where several low passes were needed to
Entering the circuit at the end of the day we were aware of intense activity, with warbirds, light aircraft, helicopters and parachutists all successfully co-existing. Dunedin has a rich history and after visiting its fascinating museums we returned to the airport. | loved the marketing message on a flying school minibus: ‘Learn to fly with a qualified instructor —or try aerobatics’. The airport is typically neat and friendly —-and had a long enough runway for a judicious downwind take-off to escape the thunderstorm closing in from upwind. Flying is a practical activity in NZ, partly because of low population density and also because of the large distances. Away from the mountains it is not unusual for farms and
houses to sport a landable paddock, and indeed our next landing was at Richard’s Croxton Paddock for tea. No windsock, no
fuss. Glider pilots manage field landings successfully by assessing tell-tale indications of wind direction and strength —and in NZ, power pilots do too. The following day we stopped off at the Croydon Aircraft Company at Mandeville,
VALIDATE YOUR licence but respect the mountains www.caa.govt.nz DON’T BE TOO PROUD to have alocal
pilot on board. Local knowledge opens up the possibilities and makes it more fun and much safer. CHECK OUT THE FLYINN website
www.flyinn.co.nz Matt and Jo run a fantastic self-fly operation —both the flying and Jo’s cuisine are exceptional. Matt will arrange your NZ CAA licence validation paperwork in advance and conduct the Biennial Flight Review.
IF YOU GO TO STEWART ISLAND, do look
up Furhana at Ruggedy Range —she’s an excellent wildlife guide. www.ruggedyrange.com/guides.htm NEW ZEALAND IN DEPTH was out travel
agent. www.newzealana-indepth.co.uk They will transform the long haul flight into a mini holiday and hold provisional airline bookings while you finalise dates for the real flying. Start saving now —you'll have vibrant memories for life.
renowned for its restoration work on classic de
Havilland aircraft, and we saw a DH Rapide in its early stages. We were on our way to Stewart Island and once we had left the coast behind the cloud
base was gradually beginning to give this VFR pilot cause for concern. Richard was still on board and as we were being forced gradually lower | asked him at what height he would usually turn back. His friendly but challenging reply was typical of NZ can-do, “Are your
wheels wet?” | decided to press on warily,
consolingmyselfthatStewartIslandwas afairly large target - but miss it and the next stop is the Antarctic. We landed shortly before the hilltop
persuade the sheep to vacate the runway. It was now time for the Abel Tasman trip. We climbed west over the mountains to Mount
Cook, admiring the crevasses in the snow and trying not to distract the climbers or trigger avalanches. Then came a gradual descent in clear air above 8/8 cloud cover reaching nearly to the west coast. After refuelling at Greymouth we headed north up the coast and marvelled at the clean sand and pure waters of the Abel
Tasman Park, before landing at Nelson for a day spent exploring forest trails and kayaking. When you see a kayak apparently suspended above the sand it certainly demonstrates the incredible clarity of the water. The following day we flew south again, seeing hardly any sign of habitation, let alone emergency landing opportunities. Just lakes, mountains and mountain sides ‘readjusted’ by earthquakes. In fjordland we had seen scars caused by avalanches of trees which had lost their precarious hold on the rock face. After three hours we reached Glentanner,
an adventure centre and Mt Cook flightseeing magnet. Needless to say, | had to stop off
again at the Omarama gliding centre, where the late Steve Fossett had been a well-liked regular. With one day left it was paddock practice time. Short take-off and landing in any aircraft is always good practice and with James, a
localpilot,on boardto identifyfriendlyfarms, |
airfield was swathed in mist.
enjoyed the challenge. Finally we reluctantly loaded our luggage
The next morning, we were introduced to Ulva, a fascinating island nature reserve, by Furhana of Ruggedy Range Wilderness
Airport, so he could fly it back. Back home in the Peak District it was time to start saving for
into the 172 and flew James to Queenstown
next time...
DECEMBER 2016 | LIGHT AVIATION 25
ENGINEERING oo
ae
i
- Permit viaingenance Release -The work —— eaeaS a
$n coron oe .
ah
p
fats)
2
> .3 3 480° 3480
eg 2-116 Z 2-6Le 483
-
.
oo
~4
j
7:
aniorey AHS|
$a
L kh || {otisah) 3 Chaneex Cue o|
* iS LARAS x Engine of
. out . ‘oa )6|COU WS/SO shen Ce ArvieNS LQS i a-\
wspec
_ ss7
\
| oN ty
|
2 ‘ }.oie CG |\ Ww arBtn,
opm il Hic lode EM MEPola, wfeswew MBROGPS yt ‘ t .A wnspe Ton recevdes |can iG
Keepyour aircraftlogbooksup-to-dateand correct. FrancisDonaldsonexplainsbestpractice dmittedly, filling in aircraft logbooks
(Above) Make sure you include enough
is one of the more mundane
detail to understand what work has been
aspects of owning an aircraft, but keeping good records in the logbook not only helps with maintenance planning and defect rectification, it also enhances the value and saleability of the
done. Note PMR reference at top of page of this LAA specific logbook.
aircraft.
pilot for club flying than for aircraft ownership. There’s not a great deal of practical advice available elsewhere either, so perhaps it’s not too surprising that when aircraft are audited by the LAA, it’s not unusual to find that aircraft logbooks have not been filled out to a satisfactory standard or in a manner that will give the owner and his inspector the maximum
The logbooks for an aircraft are a record of its flight times and maintenance history and are required by the ANO to be extant and kept up-to-date. They are also useful to the owner and to the LAA inspector as a record of what maintenance work and inspections have been done, and a reminder of special maintenance and inspection activities that will be required in the future.
Properly filled in logbooks help the owner to keep an aircraft in a safe condition, to formulate an effective maintenance plan, avoid additional costs in repeating inspections that may already have been done, and form an important element of the aircraft’s legal records. Importantly, a decent set of logbooks also helps avoid problems when your aircraft eventually gets sold on —there’s much less chance of a
comeback from a disappointed purchaser if the status of the aircraft has been absolutely clear and unambiguous at the point of sale. Filling out aircraft logbooks is not something dealt with in the PPL syllabus, which is naturally more aimed at preparing the rookie
26 LIGHT AVIATION | DECEMBER 2016
benefit.
This inevitably leads to an adverse audit finding and a corrective action being applied —typically an educational discussion with the owner and a requirement to present more detailed records before the audit finding can be closed down. This article (and a derivative Technical Leaflet) seeks to promulgate this advice more widely and so help address the issue in the longer term as part of LAA’s ongoing quality program, required under our A8-26 approval from the CAA. WHAT LOGBOOKS ARE NEEDED?
Separate logbooks are required for the airframe and engine —a combined logbook, like you used to come across occasionally, is not
acceptable. A propeller logbook is required for aeroplanes equipped with variable pitch propellers - i.e. in-flight adjustable or constant speed type —they’re not needed for ground adjustable props. Logbooks must be a format acceptable to the CAA for the purpose. CAA provide CAP 398, 399 and 400, which you can buy from pilots’ shops such as Transair. However, we strongly recommend that for LAA Permit aircraft you
use the special logbooks available from LAA HQ, or via the LAA online webshop. These are pre-printed with the appropriate wording for the PMR statements required to be signed up by an inspector following maintenance work on a Permit aircraft (PMR stands for Permit Maintenance Release —see TL 2.04
‘Certification of Maintenance’). With these special LAA logbooks, an inspector can fulfil this obligation with just a signature, inspector number and date in the appropriate column, rather than having to write out the PMR statement wording longhand. A LOGBOOK'S CONSTITUENT PARTS
Aircraft, engine and propeller logbooks normally consist of: @ Opening pages used to record the configuration of the aircraft/engine/propeller, completed at the time the logbook is initiated. @ The main body of the logbook which is used to record the flights, maintenance, inspection
relating toeachparticular bulletin ordirective
ENGINEERING
Your logbooks are only as good as the information you put in them so please follow the advice in this feature.
and other activities carried out, in sequential order day by day. @ A section of pages printed in green (the ‘green pages’) which are used to note down the dates when scheduled maintenance/
inspections have been carried out (eg annual checks, 50-hour checks) as a quick reference. These pages are not used to certify the maintenance, they are merely there as a clerical aid/index so you don't have to search through the main body of the logbook to find the entries
“We strongly recommend that for LAA Permit aircraft
you use the special logbooks available from LAA HQ, or via the LAA
online webshop”
themselves, when all you want to do is look up
the date when particular things were done. Alternatively you can use the date or hours reference in the green pages to find the
corresponding entry in the main body of the logbook more quickly. Strictly, the completion of this section is optional, but it is highly
those that require repetitive actions that will need to be carried out at intervals throughout
recommended that it used to save time and aid
the aircraft's life.
clarity in the long run. @ A section of pages printed on pink paper (the ‘pink pages’) which are used to note down Airworthiness Bulletins, Mandatory Permit Directives, Generic requirements (from CAP 747) and service bulletins etc., that relate to the
As with the green pages, completion of the pink pages is strictly optional, but it is highly
aircraft.
The pink pages are organised in different sections which are used to separate which
of these pieces of continued airworthiness
recommended that these be used as the time
taken to initiate the entries is paid off many times over by the time saved throughout the life of the aircraft. They present the owner with a clear picture of what must be done, and when, to preserve the aircraft in an airworthy and legal state.
For clarity, the pink pages in the LAA
information have been checked and found
logbookshave a slightlydifferentformatto the
not in fact to be applicable, those that require
CAA ones, allowing the successive entries
one-off actions that have been carried out, and
to be entered together in a separate block, rather than all being muddled up in one long sequential list. INITIATING THE LOGBOOKS IMPORTANT ADVICE
It is strongly recommended that the pink pages at the back of the books are filled out at the
time the logbooks are initiated. This establishes the principle from the start. The exercise of completing this section is a very good way to ‘get into’ the business of understanding the aeroplane’s special recurring maintenance requirements into the future and setting up the Tailored Maintenance Schedule (more of which next month). RECORDING YOUR FLYING
Some owners, and particularly those with group-owned aircraft, choose to keep a separate informal flight-by-flight record sheet in the aircraft and transfer the flight details to the actual logbooks from time to time. Though this helps keep the actual logbooks neat and tidy, it is important that this does not interfere with the proper recording of maintenance activity and related PMR statements at the appropriate points in the flight history. While there’s no legal limit on the delay between the actual flight and completing the flight records in the actual logbooks, the longer the delay the greater the likelinood
DECEMBER 2016 | LIGHT AVIATION 27
ENGINEERING of the informal records being lost. To ensure that the records remain in correct Sequence
and avoid overlaps or gaps, its recommended that the flight details are transcribed promptly and prior to the recording of any maintenance activity. For ease of adding up the times, it’s
engine inhibited?) etc, etc. Ideally, in the engine logbook there should at least a line entry for each day's flying, and for the airframe logbook, either a line entry for each flight or for each line entry, a record of the number of landings. RECORDING MAINTENANCE
recommended that times are recorded in
Whenever maintenance work is carried out, a
decimal hours (to one decimal place, e.g. 3.5 hours, 0.2 hours) rather than hours and minutes. Trying to subtract flight times to the nearest minute or two decimal place tach hours often leads to big errors by the time 50 hours
suitable entry must be made in the appropriate logbook(s) in sequence, i.e. immediately after the entry regarding the previous flight. This should consist of a full description of the work
have been amassed.
this to be practical, a summarising statement of it, cross-referring to a worksheet or log-book certificate where the full description is included. Worksheets and logbook certificates can either be stapled into the logbook or kept in a
Normally the times recorded in both (or all three) logbooks are the same and are recorded in the same format. For most aero engines, the time recorded is take-off to touch down.
Alternatively, it may be ‘brakes off' to ‘brakes on' less 5 or 10 minutes (or 0.1/0.2). Rotax states that any time the engine is operated then hat is counted as engine life, consequently some Rotax operators record the airborne time or the airframe but use ‘brakes on/off’ for the
engine, or use Hobbs meter or 'tacho' time. Remember that with a simple mechanical
done or, where the work is too extensive for
separate file.
When work is described, wherever possible, make reference to the material or procedure that has been followed, and the sources of materials and parts. Include the results of the
checks and any pertinent observations. Typical example entries might be: Annual check carried out in accordance with
achometer, 'tacho' time is set up to estimate
LAA form LAA/FWR-1, nil defects.
he hours based on the number of engine revolutions made, but this assumes the engine iS operating at a particular cruise rom. Unlike he Hobbs meter, it therefore only provides an approximation of the actual hours in use. The error will vary depending on the actual rom versus time profile from engine start to engine
Wing leveller installed in accordance with LAA mod 23999 and inspected in accordance with LAA Wing leveller check list LAA/-IC-APR, servo pushrod adjusted and refitted. Duplicate checks of disturbed aileron controls following LAA Repair 230 being embodied, satisfactory. Engine ground run following oil filter change, max Static rpm 2,300, oil pressure 45psi at 2,100rpm. As a result of damage done during a minor ground collision, port aileron replaced with port aileron from stored Agronaut G-AJK! serial number KlY224, in accordance with Agronaut
stop. On the other hand, because it in effect takes into account the rom used, tacho time may
provide a better indication of actual engine wear than elapsed time. Tacho time, as shown on electronic instruments (e.g. an EFIS), may use a different criteria and correlate more
closely with actual operating hours. You sometimes see logbooks (particularly engine logbooks) filled in with ‘bulk hours’ between maintenance activities rather than
recording each individual flight. This practice, common in the USA, is not good because it does not record the number, frequency, duration or date of individual flights. All of this data might be useful in the future in dealing with snags or understanding the type of use that the aircraft has been subjected to, or whether there have been long periods of disuse (was the
maintenance manual AMKL-200. Aileron
inspected and found in serviceable condition. Range of movement checked on replacement port aileron, 23 degrees up, 15 degrees down, within limits specified by Agronaut maintenance manual as above.
Fuel tank p/n 7845 replaced with new unused fuel tank of same type sourced from Univair.
Oil pressure dropped to 15psi at idle at end of flight. Oil filter changed and oil changed from Straight 100 to semi-synthetic Aeroshell Multigrade 15W50. Replace filter at next 10 hours due contamination risk at change. Aircraft cleared for using Mogas containing 5% ethanol per LAA TL 2.23, LAA Mogas placards fitted at filler caps
oe EY e and PILOT instrument MAINTENANCE panel.
RECORDING OTHER VITAL INFORMATION WHILE FRESH
The main body of the logbook should also be used to record any other pertinent information about what has happened to the aircraft, engine or propeller, even though it may not constitute maintenance or inspection. What may seem obvious information, well known to everyone concerned at the time, may
be a key clue ten or 20 years later, in different ownership, and may prevent a damaged component going back into service unchecked. Conversely, it may help prevent a still serviceable component being unnecessarily scrapped or having superfluous work done. Examples of entries in this category include: Aircraft severely damaged in ground loop accident —port wing and fuselage assessed beyond repair 12.8.16. Heavy landing 14.8. 16, aircraft grounded pending heavy landing check. Engine shock-loaded in ground loop accident 12.8. 16.
Aircraft prepared for export to USA and transfer to US Register March 2016. Aircraft involved in hangar fire at Upper Lowham on 12.7.16, quarantined with suspected heat damage to port and starboard wings, remainder of airframe not affected as separately stored. TYPICAL PROBLEMS FOUND IN LOGBOOKS The main issues have been lack of information
and information that has been inconsistent.
Failure to record flights that have been carried out is a serious drop-off and no-one would question the importance of rigorous attention to detail here —especially with aircraft with lifelimited parts such as the Chipmunk or Bulldog. It must also include details of any maintenance
that needs signing for. Sometimes, it can be difficult to judge how much other information to put in the logbook - much additional lower-level stuff is at the discretion of the owner/operator. It would be unrealistic for most people to enter details of every time the engine oil is topped up, for example (though tracking oil consumption is very worthwhile information), or air is put in the tyres. Somewhere a balance must be struck,
but certainly we feel uncomfortable when we find an aeroplane apparently going a whole year between ‘annuals’ with nothing in the logbook at all apart from the record of flights flown during the year. Have there really been no defects experienced in that time, no cracked exhaust brackets, repairs to the engine cowling or spats, no changed tyres or replaced filters? Have there been no minor modifications
\
Where the maintenance carried
granted by LAA, service bulletins or MPDs in
out is ‘pilot maintenance’, i.e.
the last year that called for work that should
maintenance that doesn’t need to be checked and certified
by an LAA inspector, the pilot must make a logbook entry in the same way and sign and date it, including his PPL number. In this case,
the signature should be included alongside \
As regards consistency, do the engine and prop details in the logbooks match those on the aircraft components themselves? Do the
hours recorded in the two (or three) books each year match up? Differences in the way the times are recorded on the engine and airframe (as described above) can lead to small mismatches building up over a period (perhaps as much as ten percent). Arithmetic
the entry but not in
errors sometimes cause hundreds of hours
the column for PMR
to mysteriously appear or, more worryingly, go astray —just the sort of thing that casts suspicion on the owners if the error comes to light. Time spent diligently filling out of the logbooks is time well spent!
certifications, as the pilot is not required to
(and cannot) ‘certify’ ma)
have been recorded?
the maintenance.
apo)JUS) SVOIN
L xX www.lxavionics.co.uk info@Ixavionics Prices include 20% VAT UK and EU Only
Come and see us at our new ® very robust tube & fabric airframe
® wing folding in under 5 min @ 85 - 90 kt cruise with Rotax 912iS
AVIONICS SHOWROOM
@ 5+ hr endurance at under 14 lit/hr
and Pilot shop right next door to the LAA
e e
600 kg MAUW, 255 kg useful load BP, Or,
PLB
LAA kit aircraft with extensive factory assistance to reduce assembly time
ICOM 8.33
;
Handhelds
excellent handling, easy to fly
Fast Find 220/406 MHz
FR300 Flight Recorder
Pa
A6E Sport A24E Sport
£249.00 £329.95
AGE Pro A24E Pro
£369.00 £449.00
me}£200.00
@!
Only £99.00 Free UK
Delivery
large cabin (43”), adjustable seats Lambert Aircraft Engineering
very large baggage area
Hangar 59, Wevelgem Airfield
ideal aircraft for short grass strips
B-8560 Wevelgem
BELGIUM
full dual controls, manual flaps
auc WWW.LAMBERT-AIRCRAFT.COM | oor Whatever your atsiion, always fly Wlission” | y4
Parachutes
Air Protect Cockpit Safety Foam
"
Quality and Comfort Prices approx £2,400.00
13mm thick £19.00 25mm thick £28.00 50mm thick £42.00
SOFTIE
@
Kanardia Instruments Winter Instruments
The whole range is available Please check website www.Ixavionics.co.uk
Horis 57 £930.00
NEW Horis 80 £950.00
Power Flarm Portable
£2,172.00
can often face expensive premium loadings when applying
EMSIS/PFD
NESIS
£1,128.00
Price on application
:
Power Flarm Core
Garmin
Core £1,470.00
/, :
SmartWatch {
WAAS GPS AN Altimeter Go-to Function
for life cover.
We can usually secure standard
Transceivers
FA ATR 833 LCD ATR 833 OLED Becker AR6201 Trig TY91 KRT 2
Ground Speed Track/Distance
rates with no aviation exclusions.
e Life assurance for your family,
D2 Bravo Pilot Watch £570.00 D2 Pilot Watch £390.00
£1,260.00 £1,350.00 £1,674.00 £1,290.00 £1,128.00
~ NEW! Trig TY96 8.33 Radio
mortgage or business
6 Watt
£2,100.00
e We help recreational, commercial, instructor
Transponders
and student pilots
e Cover can be arranged over the phone
Aera 660 Next Generation Touch Screen GPS £828.00
TRT 800H LCD £1,956.00 BXP 6401 £2,190.00 Trig TT21 £1,668.00
e Our insurance advisor
holds a PPL
e Online quotes
LX AVIONICS - 15 YEARS LX Avionics Come Ltd, VAT:Hangar GB and 79310, see 1777 Turweston us86atCompany our Aerodrome, Avionics number Brackley, and 4417407 Pilot Northants. EStore & OE NN13 5YD
stein pilot insurance SPI
Mike Pettican: 07788 986362, mike.pettican@Ixavionics.co.uk
0800 5999 101
Derren Francis: derren.francis@Ixavionics.co.uk
John Delafield: 07850 950349 or 01256 889789
john.delafield@Ixavionics.co.uk
www.flyingcover.co.uk DECEMBER 2016 | LIGHT AVIATION 29
number of formats for the
Association AGM have been tried over the years and the
recently adopted decision to make something of a day of it is proving the most popular yet. The AGM Day is currently run at Sywell and a free landing is offered, which encourages a healthy number of members to fly in for the mid-morning start of proceedings. The 2016 event was opened with a welcome by our Chairman, Brian Davies, followed by the presentation of the awards won at the LAA Rally. This is the first time the awards have been made at the AGM rather than at the
Rally, and was something of an experiment. lt was encouraging to see a good number of recipients turned up to receive their trophies.
ARTHUR W.].G. ORD-HUME There then followed a very good talk by Arthur W.J.G. Ord-Hume, one of the founder
members of the Association. Arthur spoke with great humour about the very early days of the organisation when our forefathers struggled to persuade the Ministry of Civil Aviation to allow new homebuilt aircraft to
operate on a Permit to Fly. You could rebuild a pre-war aircraft, but had to retain the original engine, no matter how unsatisfactory it might have proven to
(Above) The reasonable weather encouraged a number of members to fly in to this year’s AGM Day.
Luton Anzani engine, he installed a brand new 37hp JAP J99 flat twin, the Association having bought a number of these engines to sell to members for £60.
Faced with intransigence from the Ministry, Arthur announced to the newspapers that he
would be test flying his aircraft at Elstree the next weekend whether he received a Permit
to Fly from the authorities or not; he even arranged for the local bobby to turn up and
Well done to Dino Licheri who was
awarded the Coates
Swalesong Trophy for the best design feature. He receives his award from
LAA President, Roger Hopkinson.
arrest him, complete with hand-cufts, if he had to fly illegally. In the event the Ministry backed down and gave him his paperwork at the last minute, actually sending a motorcycle courier to Elstree. His actions, although not popular with many of the ex-service members of the then
Association committee, certainly helped the cause and in time the Air Ministry became much more accommodating to the homebuilt movement.
Arthur went on to update the Luton Minor plans, and it became the first design to be approved for build by PFA members. He also explained how the French homebuilt movement helped the fledgling PFA a great deal, and we own them a debt of gratitude for
providing the basis of the system we operate today. They also provided our first two-seat approved design, the Roger Druine designed Turbi.
This was a fascinating look back at the very early days of what today is the largest powered aircraft organisation in the UK with more than 2,600 Permit to Fly aircraft flying. SYWELL FACILITIES
The excellent facilities at Sywell enabled attendees to have a
pleasant lunch and a wander around the aircraft park,
be. Arthur carried out an extensive
where among an eclectic mix
rebuild of Luton Minor G-AFIR —he
of LAA types, Lucien D’Sa’s
described it as jacking up the registration letters and building an airframe under them - and, rather
seven-day Rally-built Sling 4’s fetching new red and white paint scheme made its public
than fit the troublesome original
debut.
30 LIGHT AVIATION | DECEMBER 20
THE LAA SERVICE AWARDS
Back in the Cirrus Room, the LAA Service
Awards were presented to a number of volunteers whose service over the years has
been so important in helping the Association’s members.
@ The Lois Parker Trophy for Tony Wickens, who has produced the Europa Newsletter for ten years.
@ The Frank Hounslow Trophy to long-term inspector Gary Cotterell for service to LAA
in engineering.Garyhasmade a significant contribution to overcoming technical issues with the Jabiru engine. @ The President's Joystick went to Catherine Tyler who has organised the Rally fleamarket for many years.
@ The Pete Clarke Trophy was awarded to Steve Hutt for achieving a resolution of the ADS-B Out issue with the CAA.
@ The Faulkner Bryant Shield went to lain Gibson, the highly successful co-ordinator of the East of Scotland Strut.
@ The Roderick Turner Trophy went to Pete White for organising flying for dozens of youngsters with his ‘Feet off the Ground' programme.
@ The Coates Swalesong Trophy was presented to Dino Licheri for his technically elegant and effective redesign of the locking method of the flywheel retaining bolts of the Jabiru engine, to overcome vibration-induced
Piper Super Cub, D-ESTS.
failures of the bolts. Well done and thank you to them all.
RUSTY WAUMANN
We then enjoyed another excellent talk, this time from WWII Lancaster bomber pilot Rusty Waumann, who must be one of few remaining WWII aircrew. Rusty saw a great deal of active service over Germany and his talk was truly inspiring to an audience who, in the main, have enjoyed relative peace in Europe during their lifetimes.
Listening to somebody like Rusty really brings home the sacrifices our fathers’ and grandfathers’ generations made. The modesty and humility displayed by this man - just doing his bit as he put it - was quite magnificent and despite the serious subject matter, he spoke with humour and pin sharp recollection of his sign up, training and action. Rusty received a huge round of applause at the end of his talk,
(Right) John Gammidge receives the RAA (Canada) Trophy for the Best Kit-built aircraft, his lovely Titan T51 Mustang, G-CIXK.
he’s a true gent and a hero to us all.
You can see a video of Rusty’s talk by clicking on the picture of him on the homepage of the LAA website was the adoption of the 2015 Accounts. THE ANNUAL GENERAL MEETING
Derek Lamb and David Mole were elected
The AGM itself only takes about an hour or so. The Chairman’s Report celebrated the very positive 70th anniversary activities and commented on the well-being of our Association and the potential challenges and opportunities ahead, post Brexit. The Treasurer's Report and the CEO’s Report were presented by Steve Slater, again all very positive as he reflected on his first year as
as new members to the Board. The co-option of Tim Hardy to the Board earlier in the year
CEO. A number of votes were then taken at
was ratifiedand he will nowserve a full hree-year term. Vice-chairman John Brady, who had come to the end of the maximum
permitted three terms in office, was elected or one further year in line with Article 23 (d) of he Association.
A Motion presented by Barry Tempest calling 0 rescind the Bill Woodham Trophy previously awarded to Tracy Curtis-Taylor, was passed. And the final vote for the re-election of Collett
the meeting. The voting system allows for members to vote by proxy if they are unable
Hulance LLP as auditors was approved. The
to attend the AGM in person and this year 143
AGM was then closed.
members availed themselves of this facility. The minutes of the 2015 were approved, as
an interesting and well run day.
A Q&A session rounded off what had been
DECEMBER 2016 | LIGHT AVIATION 31
TECH TIPS
DudleyPattisongivessome excellentadviceon makinglow dragfairings for tubes and centring ribs on tubular spars
omemonthsago | gave alittle advice on how to fabricate tube
fairings to a fellow Flitzer builder and thought others may benefit from Having watched ashort film onit.
balsa or bass blank
YouTube of a drag experiment undertaken in Germany in the mid-1930s, my belief that adding a lightweight fairing (medium balsa or bass) to a round tube was worth the effort was greatly reinforced. The production way to produce fairings would require the use of a French head spindle
moulderor similar.Thatwasexactlywhat | used in the Flair Products workshop when the late John Greenland asked me if | could
produce the balsa fairings for the Comper Swift he was building from scratch. What a stunning machine that turned out to be.
The average homebuilder is unlikely to have such a machine, but they may well have access to a small rise and fall table saw. The
drawing, photographs and captions tell the story from here. The groove is formed first.
The outer shaping is easily carried out with a modeller’s razor plane and a sandpaper block.
Glue the fairing on to the tube with epoxy,
(Above) This drawing shows the whole principle of the procedure. The radius of the
fill the joint between balsa and tube and sand
tube is drawn on the end of the blank and several passes are made over the top of
down. Tocover youcaneither usethecovering _ thesawwiththebladesetto cutvariousdepths.
A piece of coarse sandpaper is wrapped around a length of tube to smooth the
After being passed over the saw, the waste is broken out to reveal a rough halfround profile.
half round groove.
SSS
CSSS
SST
32 LIGHT AVIATION | DECEMBER 2016
RS
ST
I
rib position.
TECH TIPS
you are using for the aircraft or cover with glass cloth and epoxy and paint. The latter method will give a hard external finish which can be useful on a cabane strut which is grabbed when hoisting yourself into the cockpit!
Marking those rib positions Normally a spar has flat vertical surfaces, the webs, where the ribs come up against it, making it easy to mark the rib positions with a square. Whilst building the Sherwood Ranger though, | was faced with the task of marking out the rib positions on the round tube spar. Thinking about how to get a line around the spar which is square to it, | came up with the idea below. This solution will be obvious to
some (a chap attending one of my woodwork courses saw the paper tube on the spar and
knew immediately its purpose) but it wasn’t to me. =
(Below) After the rib positions have been marked, roll an A4 piece of paper around the spar, line up its edges, and use masking tape to tape it together. Do not make the paper ‘tube’ too tight as you need to be able to slide it along to each
(Above) This photoshows a sectionafterthe grooveis finished.
DECEMBER 2016 | LIGHT AVIATION 33
enjoyed Clive Davidson no favours fliesby a rare its siblings Britishand machine camethat alc _
FLIGHT TEST
DECEMBER 2016 | LIGHT AVIATION 35
FLIGHT TEST Owner Richard Webber and the
British-built 1951 Chrislea Skyjeep he calls 'a funny old girl’.
36 LIGHT AVIATION | DECEMBER 2016
FLIGHT TEST er owner, Richard Webber, calls
her 'a funny old girl', perhaps so. Looking like a distant relative of the Auster family, she has a generous girth of cockpit supporting a bulbous canopy and a high wing —complete with that quaint leading edge propeller driven generator —plus a purposeful ‘inline’ cowling with underslung silencer. Clearly, she belongs to the same era; in fact the Skyjeep was built soon after the war in 1951.
The Skyjeep's heritage is an interesting
tale.Pre-warwe hadarelatively thriving light aircraft industry and one of many small companies vying for sales was Chrislea Aircraft. Established at Heston Aerodrome in
late 1936 by designer Richard Christoforides and business partner Bernard Victor Leak, the
company took its name from an amalgam of parts of their names. Their first design was a wood and fabric side-by-side two seater called the Airguard. Powered by a 65hp Walter Mikron and registered G-AFIN, it was the sole example built and, surprisingly, it is still in existence, stored and awaiting completion of a rebuild. The next design, the CH3 Ace, did not appear until the end of hostilities, first flying in 1947, and saw a complete change of direction with a fabric-covered, steel tube fuselage, aluminium winged four-seater with a then rare tricycle undercarriage. Power came courtesy of a 125hp Lycoming O-290. It was originally built with a single fin and rudder but air tests by the company pilot, Rex Stedman, soon established that it needed two.
In a letter to the Air Registration Board’s Chief Test Pilot, Stedman explained that although he had rudder control on the ground, once
airborne it ceased to exist. Neither were the
side for rudder —no rudder pedals being fitted.
ailerons very effective so he was only confident
A foot throttle and floor-mounted differential
with the elevator control. The aircraft wallowed
wheel brakes were also installed.
about the sky at will. “When | say wallowed,it is putting it mildly,” wrote Stedman. "With each yaw of some 30 degrees each way, it lifted its
In October 1947, the Air Registration Board's Chief Test Pilot, Mr D Weightman, flew the
nose and tried to sit on its tail."
Stedman was trying desperately to turn the aircraft through 180 degrees to head back to Heston to land. “l was trying to catch the upward wallow to starboard and hold it with the aileron to get the nose round to port,” he said, and eventually, after a manful struggle, he was able to do so. He had to land with a crosswind
and just managed to reverse a wing drop and land, fast but reasonably straight. With two fins and rudders replacing the single vertical tail, the directional stability issues were resolved, though only one example of the Series 1 Ace, was built. This was probably because importing American aero engines was very expensive at a time when Britain needed to encourage exports rather than imports. The Series 2 CH3 Super Ace, featuring the home-grown 145hp DH Gipsy Major 10, was the aircraft that eventually went into production in 1948 at the company’s new Exeter location (Heston Aerodrome having closed in 1947). Other mods included a two-foot extension to
the wingspan and smaller, rounder fins and rudders.
aircraft to assess the control system and, after
four flights, considered that a trained pilot of even limited experience should be comfortable and competent with the controls within an hour.
However,he consideredthat thisowed alot to thefact thatthe SuperAce was a stable and benign machine. A similar system on a less forgiving aircraft would undoubtedly be something of a handful and require considerably more instruction. Despite the ARB's approval, the control system immediately proved unpopular with potential buyers, so rudder pedals were fitted and this variant became the Series 3. The
wheel was still an issue though, and sales were very slow with only 18 aircraft being sold. The Skyjeep (CH3 Series 4)generator was brought inbe Leading seen just on one edge the ofmounted Skyjeep's its many vintage starboard charms. can wing, in 1949 as a final effort to save the company, it
being fitted with conventional stick and rudder controls. The rear fuselage was extended slightly and provided with a hinge up, full length lid to provide for casualty evacuation, and the undercarriage became taildragger, one assumes for easier loading of a stretcher. Power was upped 10hp with the substitution of the 155hp Blackburn Cirrus Major 3 engine. Unfortunately, it was all too little and too late, plus of course the climate was not very conducive to marketing new aircraft —dealers were awash with ex-military hardware, Tiger Moths were selling for not a lot more than the
The Ace’s claim to infamy however, and ultimately a major contributor to its demise, was its unconventional control system. Supposedly designed to make learning to fly much easier, the aircraft had a steering wheel which turned like that in a car to operate the ailerons, moved
value of fuel in their tanks, and times were hard
up and down for elevator, and moved side to
as the country struggled to win the peace.
FLIGHT TEST Privateflyingwasvery much a luxurythat would, for most working folk, have to wait. In 1952 the assets of Chrislea Aircraft were sold
and several finished and part-built aircraft were scrapped. It is quite remarkable that two Chrislea Super Aces and Skyjeep G-AKVR have survived, as the total production run was only 22, and only three of those were Skyjeeps. To add to the the intrigue, subject most aircraft, of the being aircraftsold went new abroad, to Australia. KVR,
Registered VH-BRP to owners in Tambo, Queensland, it was withdrawn from use in
1955 with just 21 hours logged. Purchased by Kingsford Smith Aviation of Bankstown Airport, Sydney NSW, it was re-registered VH-RCD, re-engined with a 200hp Gipsy Six and sold on. But with only another 30 hours on the log, it was returned as underpowered. Kingsford
“There is another oddity just forward of the tail—a car door handle is fitted
by the VHF aerial near the tail-end of the upper
fuselage”
away before he could finish the aircraft, but his
wife and family saw it through to completion and it flew again in 2004. It was sold to current owner Richard Webber, in 2005.
Richard had very kindly agreed to allow me to fly the Skyjeep but | had obviously got my wires crossed. Prior to doing my research, | was under the impression that it would have that rather weird control system. How relieved
| was when nothing of that ilk was present here at Eggesford. What was here was an affable, avuncular and jovial Richard Webber, known by great reputation for his Austerlyness. He owns, maintains and flies a number of these old British machines and has done so for a
considerable time. The Skyjeep fits into his collection very nicely.
Smith Aviation then raised the rear turtledeck
It wasn’t until 1983, when it was bought by a Mr English, that some real progress was made and, after a four-year rebuild, on 21 September
to bring it in line with the roofline but could not find a buyer, so the aircraft languished at Bankstown in an ever-growing state of disrepair. It changed hands a couple of times. In 1971 Alan Stanfield, owner of Supreme Mousetraps, even commenced a rebuild. However, he eventually advertised the project, complete with a standard fitment Cirrus Major 3.
Unfortunately, she was damaged in a forced landing on a beach in 1991 and languished unloved again until bought by, David ‘Jim’ Bean from Anwick, who brought her back to England in 1999. Sadly, Jim died shortly after and, by now registered G-AKVR, she was sold to Neil Needham from Sleaford, who was responsible for most of the current rebuild. Neil too passed
1988 she flew for the first time in over 30 years.
SPOTTING THINGS ON THE WALK AROUND
| decided to start with an external inspection and | was drawn directly to the tailplane to have a closer look. The twin tail may not be unique but it is certainly interesting. Of the two rudders, only the right one has a trimmer, the left has a fixed tab; the elevator trimmer is centrally sited with a white nav light mounted on it. | have only ever flown one other twin tail aircraft, the turbine powered EKW C3605 Swiss
fighter bomber with its unbelievably long nose and taildragger undercarriage. By strange coincidence, Nigel Hitchman has included a picture of one in his Hahnweide report on page 16. When conducting conversions from the rear cockpit | had 25 feet of nose up ahead, but it was manageable and great fun. My primary concern on take-off was directional control - we had a three-bladed
metal propeller ahead attached to a 1,115 shp whining turbine and the propeller slipstream passed between the main fins and rudders; unless the tail was held on the ground until 100 koh she would swing left. And swing left she would, even with you stood firmly on the right rudder with leg trembling pressure. A lesson to consider when flying this, albeit smaller and lighter beastie. There is another oddity just forward of the by aavertical stay, Richard pointed outVHF that it tail, car door handle is fitted by the aerial near the tail-end of the upper fuselage, along with a couple of over-centre side latches. Flipped up and the handle turned, the upper section of the fuselage is pivoted upward. It is hinged right behind the cockpit and reveals a generous space, originally intended for a stretcher case.
With this rear turtledeck tipped up and held
Twin tail fins of the Skyjeep with trimmer on the right rudder —left rudder has a fixed tab. Note flaps are also down in this shot.
the two of us. was likely that a nurse could sit in the left rear seat and administer to the patient, whose head The high fabric covered wings are supported in the traditional style with two-a-side, equally would be alongside her over the rear right seat. This suggests quite a wide centre of gravity sturdy diagonal bracing struts, sloping down to just above the forward main undercarriage range, effective elevators and trim —| certainly hoped so, although we would be flying with just Richard TheisSkyjeep attachment. a keen looks enthusiast very Auster-like of the British and marque. owner
FLIGHT TEST Walking from wing tip to wing tip, checking
and there is even a gap between the seats.
the throws of the fabric covered ailerons shows
Nobody could fail to notice the enormous compass, it looks like it should be on a yacht with its polished brass edged outer ring. Its size and low position would clearly help the maintenance of a heading, avoiding any parallax. It was marked as a P10 but | hadn't
they are differential (with half as much again upward deflection as down), and are frise, their leading edged noses protruding into the slipstream. They are also probably weighted near the nose for balance, to avoid any hint of
flutter. | look forward to seeing how effective they are at minimising adverse aileron drag... will those rudders need much deflection in concert?
Sliding my curved palm around the wing tip and along the leading edge leads us back to the canopy, and forward to the engine cowling. Under here is that 155 horse power Cirrus
Major with a silencer of large proportions slung beneath. The metal prop is from a Magister, slicing the air clockwise (viewed from the front). So left rudder will be required to help keep her straight on take-off; fore-warned is fore-armed. THE COCKPIT
Getting in is easy enough with the ‘proper’ doors. Unlatching the door and holding it open with a shoulder, you place the opposite foot to the one that will slide into the cockpit on the undercarriage step and pull yourself up and into the cockpit. Up and forward there were tassels, rather like curtain pulls, to grab and help your inward and upward but there are also tubes you can grab. Looking up, in the cockpit roof, there are two slim clear panels through which you could scan the horizon by looking over the wing in a steep turn. It is roomy enough for both pilots to stretch and move around finding and locking shoulder and lap straps without rubbing shoulders
seen one of this calibre and bore before.
| am sitting on the right and 'my' rudder pedals don't have any brakes, it will be a good exercise to see if | might be able to manage any purposeful taxying with a pivoting tailwheel over the grass in a light crosswind. Centre panel is the throttle quadrant in which the throttle lever and, directly behind it, the
the winder. Flap limiting speed is placarded, with a huge amount of other information on the left-wing root, unfortunately out of the pilot's scan but he should know the limiting speed to be 75mph. (<65kts). The other placards don't include a check list but give virtually all of the information required to both fly and monitor the engine. THE PANEL The left-hand side of the black faced
instrument panel has the basic six, scanning clockwise from the central AH, Altimeter, VSI,
DI, Turn and Slip and ASI. Above the altimeter is a suction gauge and to its right the squelch
mixture lever, run in the same slot. | liked the
and radio on/off switches.
thinking behind it: should you lean out the
The right-hand panel indicates the systems conditions and electric facilities. Starting top left, the standard pocket watch sized oil pressure gauge sits conveniently above the rev counter and below these are the Tiger Moth type finger magneto tumbler switches. To the right, along the bottom row, are the battery switch (master), nav. and landing light switches, and a 25amp generator switch and a 2amp voltage regulator. Centrally placed is a fuel indicator, surprisingly marked in litres although it looks of the correct vintage, and finally the ammeter rests at the end of this top
mixture at altitude and have reason to reduce
power, then the throttle lever pulls the mixture back as well, enrichening it. Close to the throttle there are two horizontal levers sprouting one to the left, and one to the right. These are the elevator trim on the left and the rudder
trim on the right. Again, a nice ergonomic arrangement being able to alter power and trim to counter pitch and torque, but | am not sure that | Know many single engined aircraft, within this power band, that have a rudder trimmer.
Centrally placed and high over the windscreen, is the large handle to wind the flaps down (clockwise) and back up again and it is virtually friction free to spin effortlessly. There's an unobtrusive flap indicator in the right-wing root, marked from 0° to 45°, but this cannot be seen from the right seat, it’s a case of glancing over a shoulder out of the window to look at the flap, or reaching the end stop of
row. Oh, one more, the oil temperature dial is
beneath this and the corresponding placard states a minimum of 30° prior to take off and a maximum of 85°C during a climb. There is a metal T-handle located under
the throttle to pull to engage the parking brake. The left P1 seat has toe, or rather, ball
of the foot rudder brakes, but the hapless
FLIGHT TEST fellow in the right seat (me!) has only rudder pedals. This fact of the ‘other seat' not having brakes is surprisingly common, particularly in older aircraft, and | have always thought it an unnecessary and potentially dangerous arrangement. | once declined to carry out a type conversion
on an aircraft so equipped, but fortunately the owner was prepared to spend hard earned money to have the system modified to dual brakes. Had we not had the second set of
pedals he would have lost his aircraft from swinging off an East German concrete runway on both of his first two take-offs. The aircraft
had 700hp and ‘bags' of torque —power without control can end badly whether the aircraft are large or small! Circling the stick around the ‘box’, itis noticeable that the lateral throw of the stick is
quite limited. So unusual is it that | measured it, from centre to fully left or right is just 3 % inches. Fore and aft movement appears to be
kinaesthetically normal. The sticks themselves are shaped and bowed so that they curve under the seats. The front seats may be tilted for comfort and
latched slightly farther back, as the rudder pedals are fixed. Richard made a point of telling me to make sure they really were firmly latched and to jiggle in the seat. Wasn't there a spate of incidents with worn latches on seat rails in small Cessnas whose seats slid back
| thought | knew where everything was, but |
a distinguishing feature in the middle of the
couldn’t find the fuel tap —it, a modern Andair
airfield —a hill! Not one of those molehill type
device, was hiding low down in front of the compass mounting.
bumps that might swing a croquet ball off its mark, no, this is a ‘Hill’. Lined up and ready to go, the other threshold cannot be seen
TIME TO FLY!
The purpose of our flight was to allow me to gain an impression of the aircraft and to position it for the camera ship, a Cessna 182. As the photographer would be on the left seat of the camera ship (the only side with an opening window), it made sense to fly the Skyjeep from the right hand side so that | would see more of the camera ship than | would in the left seat. The perceived problem of having no brakes on this side would not be an issue as
Richard would be coming with me to look after his ‘girl’ and step in, or more accurately ‘on’, a brake if needed.
All briefed, we set about the start with chocks
under the main tyres and nothing behind to be blown away. | sat in, and was told to position the throttle just short of the vertical. Under a raised right engine cowling Richard worked the fuel pump at the rear of the Cirrus with his left
line up. | could taxy into wind without brakes
andgentlyweavetowardsthethreshold,but | couldn't turn us the last 60° or so onto the cut
grass path without a helping left brake from Richard. A silhouette of the shrinking C182 levitated above the slope and we were rolling. TAKE-OFF — KEEP THAT STICK FORWARD
The standard technique worked until the brow. Stick back, tail on the ground, power on slowly, left rudder predominating, keeping straight, full throttle applied with 2,090rpm, tail slowly rising, keeping straight, nose in the estimated take-off attitude (nose pointing AT the hill and under the horizon) speed increasing, still straight, over the hill, Ooo! an horizon!
before power checks, prep for flight and vital
Not straight, drifting to the right and still on the ground. | realised my mistake of having eased back on the stick as the speed increased when | heard the helping comment, “Keep the stick forward.” | did. We had near, if not full, left rudder and with a few gentle bumps we rose into the air to climb away with a reduced poundage on the rudder pedal. | accepted a gentle climbing attitude, brought the power back a hint to 2,000rem and looked
actions.
further inside to check the oil temperature was
hand and then tickled the carb, checked again the mags were down and off, and pulled the prop through four compressions. Mags on and ‘Contact!’ She fired on the first stroke with such a rich series of conjoined notes that instantly warmed me to her. The oil pressure rose and we just had to wait for the
at take-off? There are generous map pockets in both front fuselage walls, and with its leather seats, nice headlining, wooden door trims and
temperature to climb another 18° from ambient
wind up windows, the interior felt like a cosy
If you have been to Eggesford | am sure you
old 1950s Rover.
as there is no line of sight. The camera ship disappeared over the top as we moved to
will remember it. It is a lush green field with
within limits. The ASI showed 115mph. Meanwhile the 182 was starting a large right
DECEMBER 2016 | LIGHT AVIATION 41
FLIGHT TEST hand turn and we in the Skyjeep cut the corner and nudged into position, straight and level at 110mph at 1,800ft. The oil temperature settled at 70°C (limits being max cruise 75°C and max climb 85°C) with the pressure at 35psi smack in the middle of its 30-40 range.
We positioned low, we positioned higher, we flew on the inside of the turn and the outside
of the turn, we were beckoned up and back,
forward and lower with white gloved signals, did the breaks inwards and then outwards and
the (in)famous head-on shot with both aircraft flying, yawed inwards towards each other, with crossed controls. A thumbs up from Neil and we were free to leave the formation to better
explore the Skyjeep’s handling. First things first; we were now over moorland; the fields having been left behind. “Do you know where we are Richard?” A
short laugh. “Not a clue.” | think he was pulling my leg but he could have been telling the truth. We spotted a 'Cessnery' sort of shape heading away and turned in the same general direction. It seemed about right. Looking ahead
| couldseesmokefrom afire, it mighthave been the same one we had noticed close to
Eggesford when we arrived. We'll carry on. Meanwhile, | was setting ‘Victor Romeo’ in the cruise as accurately as | could prior to checking stability. Clear ahead, | eased the stick forward to lower the nose 10° and waited
for the speed to incease by 10mph, then | let go. The standard response occurred as
the trim took over and pitched the nose up, looking for the trimmed speed. It passed the starting height and as the speed decayed the nose edged down to complete a phugoid. The second cycle saw the parameters narrowing and she ended up slightly higher than the start, and was back to straight and level. The placarded clean stall soeed stated
46mph,and withflapsdownand a lotof clockwise winding on the handle in a ‘light’
four aboard), it sinks out of the luft at 45mph. The figures worked. Now for a bit of side-slipping; first to the right, wing low with approach flap wound strenuously down, opposite rudder and 1.2 of the stall soeed, trimmed. Lateral check first and let go of the stick. You would normally expect the wing to rise. Not a dickie bird, it stayed low. Oh, wait a moment, it was slowly rising. No, my fault. | had let the speed rise. Right wing down again to the same angle of 20° low and this time the wing is held as the left rudder is released to check for directional
stability. Hmmm, same thing, no change. And it was the same with the left-wing low as well. | remember a long time ago Air Information Circular from the CAA, probably in the late 70s or early 80s informing amateur aircraft builders not to put overlarge canopies on their aircraft as this might blank the tail surfaces. Perhaps this is a similar issue. Further to that, the favorably positioned elevator trimmer had
ball, the instrument furthest away from the
right-hand seat, and allow for parallax. To gain some height after our side-slipping shenanigans, Richard demonstrated the ‘proper’ climbing attitude at 7Omph, for the best rate. Putting on full power, he pitched the nose so high that there was no side view over any part of the nose to see the world.
He admitted he didn't use this technique very often.
42 LIGHT AVIATION | DECEMBER 2016
urther than | judged to be about 25°. | was physically straining, but at least my right hand holding the stick didn't wobble in sympathy. | did put it down, smoothly, eventually. | urned to Richard, “Well?”. “Yes,” he admitted, “the end was good, shame about the two bounces before that!”
No certificate I’m afraid, but a hugely enjoyable day out from Henstridge with Neil, and camera ship owner/pilots Jenny and John. Thanks Richard for letting us play with your wonderfully quirky artifact of British aviation heritage.
eee aN esse
SPECIFICATIONS Wingspan DIMENSIONS 36ftOin
Length 22ft 2.5in
Height 7ft Oin
In the cruise the aircraft was stable and
Wing area 177sq ft
suited for this regime as it is a sedate form of
Empty weight 1623lb All up weight 2,550lb
transport. It would also have been well suited
to casuvac operations with its short field performance and reasonable range from its 36 gallon capacity. As we entered the circuit, right hand
condition [Maree (that rate was Eka us) at4Omph. with ‘Heavy' its(with
Gypsy-like cowli
resistance | couldn't wind them down any
anormal action and result, but the rudder
trimmer lacked any appreciable sense of feel as it was being levered on or off. For confirmation, | had to keep checking the slip
downwind for runway 11, Richard turned to me
*
and said, “If you can get her down smoothly,” pause for effect, “I will give you a certificate!” My base leg was tight and | started to ower the flap, but winding clockwise | met an impass. At altitude, prior to stalling, | was owering the flap as | was slowing down and he action was simple; here, back on base and flying at a higher speed, | met such a
Cruise speed 113mph Climb rate 550fom Range 500 miles
Fuel capacity 36 imp gall
Litre Oil + Filter + Drain Wash
PG AUT
For Rotax 912/914 Series Engines %y er
THEDRIVING FORCE IN LIGHT AVIATION
Carriage costs extra
m6 f @)| AEROLUGE :
= © Aircraft Engine Oil
For all display advertising enquiries contact Neil Wilson 07512 773532 neil. wilson@laa.uk.com eesr ws! a i aia
Most popular kitplanes in the world www.vansaircraft.com 9464 completed, 346 inUK 001 503 678 6545 WWW.[_ A A aU kws co mM includes
e
FREE computer
13issues ayeardelivered toyourdoor
Honest, independent highquality content | 1SignupbyDirectDebit(UKonly)
Full digital accessvia iPad, iPhone,
There’s no sponsoredor paid-for editorial
2 Get the next three issuessent to you for free
AndroidorPC
inFLYER, in print,online, anywhere
| 3 Carryonbecause you’re enjoying themag
FLYER readersreceive at least 65 free
Written by pilots, for pilots
landings ayear, worth£852overthe last13issues. Enough forthatnew ANRheadset!
Wetesteverything wereview Stunning photography Awardwinningarticles
Three issues for
and we’ll only charge you £7.50 a quarter
| 4 If youdon’tthinkFLYER isforyou,cancel | withinaweek ofreceiving yourthirdissue | andwewon’tcharge youapenny
and then
every quarter DECEMBER 2016 |LIGHT AVIATION 43
FREE LANDINGS
FOR DECEMBER 2016
This month we havetwo free landingvouchers Henstridge is pushing the boat out this month with discounted fuel, free landing and free tea and coffee during Christmas week. Free landing too at Sherburn-in-Elmet, a half-price landing at Shobdon and a £2 per person discount for the Coventry
Air Museum. Please check opening times of airfields and the museum over the Christmas and New year period. Fingers crossed for some flying weather, at least all three airfields have hard runways so waterlogging shouldn't be an issue. Have fun!
FREE LANDING DECEMBER 2016 and NewYear Weekend upto 2nd §Aviation January —incNew Year'sDayFly-inHENSTRIDGE 01963 364231 the 2nd, gets a free breakfast, collectable any
Based in the lovely Blackmore Vale, Henstridge is offering more than just a free landing for December. The airfield has a Christmas Week Special with free tea and coffee from December 26 to January 2, plus discounted fuel. Any pilot uplifting more
weekend in January 2017! There’s also a fly-in on New Year’s Day. Please avoid flying over nearby villages. Non-radio aircraft please PPR. Cooked
than 100 litres of 1OOLL/UL91, between 26th and
during the week. www.henstridgeairfield.com
food at the weekends, with tea, coffee and snacks
FREE LANDING DECEMBER 2016
aMWelieys
SHERBURN-IN-ELMET 01977 682674
With both hard and grass runways, Sherburn is an
the website for details. Leeds East (was
ideal location to visit for the winter months. PPR
Church Fenton) now has an adjoining ATZ with Sherburn. Radio: A/G 122.60. Please keep clear of all local villages. Closed Christmas Day and New Year's Day.
please. Avgas, Jet Al and Mogas available. The Pilots Retreat café gives a good choice of food, including a full Sunday roast. New circuit patterns are now in place so please refer to Visiting Pilots on
§Aviation
www.sherburnaeroclub.com
HALF PRICE LANDING DECEMBER 2016
SHOBDON 01568 708369
Shobdon offers a warm welcome and its café serves a wide menu, with the famous Shobdon
lunch! Avgas and Jet A1 available. Please PPR. Open seven days a week. Radio 123.50. Closed on
roast on a Sunday lunchtime. Located 6nm west
24th, 25th, 26th and 31st December.
of Leominster in the Welsh Marches, a short walk
www. shobdonairfield.co.uk
to the lovely local village church and The Marches are good for stretching the legs or walking off that
§Aviation
SPECIAL LAA OFFER FOR DECEMBER 2016
MIDLAND AIR MUSEUM AT COVENTRY
lf you are looking for somewhere to visit during
Vulcan. Opening times are 10.00am until 16.30om
December, this voucher enables you to a £2.00
all week—closedChristmasEve,ChristmasDay
discount per person, adults and children (up
and Boxing Day. Please cut out this voucher and hand it in on arrival. There is a shop and tea room on site. If flying in to Coventry Airport, landing fees apply. www.midlandairmuseum.co.uk
to four people by car or air) to the Midland Air Museum, next door to Coventry Airport. There are many aircraft and exhibits to see, including a
RRM
rec liMUECieee
andbusinesses withintheaviation industry. Weoffercompetitive premiums fromtheUK's leading aviation insurers.
i, e O) ae ua
At Alan & Thomas, we specialise in tailored insurance schemes for private light aircraft, helicopters, airfields, flying clubs
For your free review & quotation, please contact Peter Matcham on
insurance
or email
www.alan-thomas-aircraft.co.uk 44 LIGHT AVIATION | DECEMBER 2016
Alan & Thomas Insurance Group is a trading name of Alan & Thomas Insurance
Brokers Ltd who are authorised and regulated by the Financial Conduct Authority
Merry Christmas from Adams Aviation and Garmin!
aera 660: From £675*
G5: From £975*
Next-Gen,touch screen, feature rich portable
All-glass backup or primary flight instrument
GPS.
with optionalautopilot
Just in time! The brand new Garmin Ultra 30! This best-in-class camera shoots up to 4K/30fps video action to show all your aviation adventures in crisp brilliant detail. Virb Ultra 30 also features 3-axis image stabilisation, built-in sensors,GPSand G-Metrix™ sensorsto provide you with a plethora of information to overlay onto your videos. The Virb Ultra 30 can display images in real time on the market leading uncertified glass cockpit G3X Touch system and can be controlled via the D2 series of aviation watches!
The perfect gift for any aviator!
D2Titanium: From£695* sophisticatedGPSwatch
Unsure on the most cost effective way to upgrade to 8.33Khz? Contact
with TAF, METAR and
us for guidance on your best soloution!
Direct-ToAirport features.
To provide the complete avionics package the one and only Manuel Queiroz, our messiah of wire, will be accompanyingus answering your questions on all things install.. and more we're sure! We
*AllpriceexVAT
will also be giving presentations, so keep an eye out for when to come and see us.
Haveyousigned upto the newAdamsAviationwebsite?If notyouaremissing out ononline LAA discounts as well as real time stock checking and same day shipping!
Adams Aviation: Tel: +44 (0)1689 842999 - email: rconington@adamsaviation.com- Web:www.adamsaviation.com
H.R. JENNINGS &CO.LTD. | Brea rragioaacrac Established 1922 Sn RMBeam cies las
Authorised and regulated by the Financial Conduct Authority
AVI AT] O N AN D ts = N = eiA L
Safe forYou, Safe fortheWorld, Safe forYour Airplane
Competitive quotations for all types
7
of aircraft and other orientated
insurance requirements. Unique aircraft ground risks/home aaDil ae
10 re
Complete
Instructional:
Rie
Aviation South Croydon, House, 61 Surrey, Brighton CR2Road, 6ED
*Stays Complete System forFabric, Metal, Composite, and Wood Aircraft ° High Performance Catalyzed Waterborne Coatings for the Aerospace Industry ¢ Durable High Gloss Finish ¢ FAR 23 and STC Approved
¢ EPA Compliant, Non-Hazardous, Non-Flammable, Very Low Odor
Telephone: 020 8680 0688 Fax: 020 8688 5109
Email: Web:norman www.jenningsinsure.co.uk @jenningsinsure.co.uk
¢ Competitively Priced ° All of the Products You Need to Finish Your Aircraft in One Stop
* Practice 1-888-356-7659 www.stewartsystems.aero KitsAvailable!° (1-888-EKO-POLY) [=]HO —— rt
DECEMBER 2016 | LIGHT AVIATION 45
ByAnne Hughes
s the days shorten and our time for taking to the skies is curtailed, it’s good to see such a varied programme of talks and social
gatherings at venues across the UK for the winter evenings. Thank you to all who have communicated from far and wide, your contributions make these pages useful for all LAA members.
The Strut newsletters, which | have received
from several Struts, make magnificent reading and certainly highlight activities across the membership. We are particularly pleased to welcome to our pages the LAA First Continental Strut. Wim Van
Malcot sent us the following: The First Continental Strut is newly formed and will mainly act as a social hub for
is an increased interest to represent permit to fly aircraft in Belgium. As an example of this, VVMV (Vlaamse Vereniging voor MotorVliegclubs), a Belgian based organisation representing most of the Belgian flying clubs, was recently accepted as a member of EFLEVA (European Federation of Light, Experimental and Vintage Aircraft). For the first time
EFLEVAhas a local partner in Belgium to discuss topics such as the implementation of European cross border recommendations.
lt is this same group
us by e-mail if you would like to be in touch Wim. VanMalcott@bella.be
GASCO SAFETY EVENINGS
In October | was pleased to take up an opportunity to attend a General Aviation Safety Council (GASCo) evening at Turweston and it is good to see many of the Struts have organised similar evenings this winter. Not only were we challenged at the beginning of the evening about our general awareness, but we also left with a folder of handouts and
an excellent pen! Neil Wilson organised a GASCo evening for the
LAA members across the Channel. Our
who decided to form
Wessex Strut and sent the
headquarters are in Belgium, but we are open to LAA members across Europe. Those of you who visited the Experimental Days fly-in over
the LAA Strut. We plan
following report in order that
to launch a website in
other LAA members would
the near future but in the
also feel these evenings are
too valuable to be reading. missed: the pastright) two years, will Safety have noticed that there (Above) (Above Wim GASCo Van Malcot (right) Evenings, and Filip held Lambert throughout meantime, of the the First you winter, can Continental contact provideStrut. a wealth of advice and take home material for further
46 LIGHT AVIATION | DECEMBER 2016
LAA STRUT NEWS An excellent turnout of Strut members and
airfield friends, plus other flyers from local airfields, made our October meeting, a GASCo Safety Evening presentation, a very good one.
BRISTOL STRUT
BAWA Club, Filton, 19.30.
Contact te@bristol-wing.co.uk
Contact: laaoxford@gmail.com 14 December Strut Christmas Quiz Night 11 January AGM.
6 December Christmas Quiz
10 January Highlights (or low points!) of your flying in 2016.
REDHILL STRUT Three Horseshoes, lronsbottom, 19.30.
DEVON STRUT
20 December TBA
showed a number of radar traces of control
The Ley Arms, Kenn, Exeter, 19.30.
17 January TBA.
zone infringements in the first half, and explained why they believe that there are so many infringements. Poor planning, distraction from monitoring the flight, and not using GPS were some of the major causal factors.
Contact: david.millin@sea-sea.com
The title was / am in Contro/ and presenter
Michael Benson divided the evening into two
Contact: david@milstead.me.uk
parts.
Firstly, he and colleague, Mike O'Donoghue,
16 December Christmas Dinner at The Ley Arms
12 January Flying the A10 Warthog by Steve
Contact: dmjohnstone@btinternet.com
Ladd.
or 07507 488246
In the second half we looked at Loss of
Control and how to prepare for, and keep on top of a situation when things start to go wrong. Three of our local pilots have had significant incidents and they were all prepared to talk abot them openly. Colin Fisher had an en route engine stoppage in his Cessna 177 and put it down safely in a field. Annabelle Burroughs had an engine failure not long after climb out in a TB10 with four people on board. There
SHOBDON STRUT Shobdon Airfield, 19.30.
8 December Christmas Social
EAST OF SCOTLAND STRUT
12 January My Father in the RAF by Richard
Harrow Hotel, Dalkeith, 20.00.
Combe.
Contact: inrgibson001@btinternet.com 5 December TBA
SOUTHERN STRUT
January no meeting.
Contact: tony@uraniborg.freeserve.co.uk
The Swiss Cottage, Shoreham-by-Sea, 20.00. Contact: palmersfarm@sky.com 7 December Christmas Dinner at the Tollgate, Bamber (Members free) 4 January 1hr 13min video Early Jets of the
was no time to head back to the field so she
12 December TBA
RAF.
put down ina field and everybodyvacated
9 January TBA.
The EAST Plough, MIDLANDS Normanton-on-Soar, STRUT Leics. 19.30.
STRATHTAY STRUT
safely. In both of these instances, the pilots had planned for possible ‘what if’ scenarios, and Annabelle had properly briefed her passengers prior to the flight. The third pilot, Adrian Goodwin, bravely spoke about what happened when his Emeraude suffered carb icing and he crashed on take-off. His first thought was 'This can't be happening’ which meant he lost about 3-4 seconds of corrective action time. By the time he realised what was happening he had lost control of the aeroplane, stalled and spun in. He was very lucky to have escaped serious injury as the aircraft was destroyed in the ensuing crash. If he had pre-planned his action in the event of an engine problem shortly after take-off — and accepted that it was a possibility before he had opened the throttle at the start of his take-off run, his preparedness would have almost certainly lead to an inconvenient forced
landingratherthan a life-threatening crash.
26 January AGM and video evening.
14 December TBA
These examples very much added to the evening —hearing first-hand accounts from friends made us realise that if it can happen to them, it could happen to you. Be prepared and before flight, brief all your passengers and yourself in case of an emergency (including how to open the door/canopy). Above all, keep flying the aeroplane, were some of the major lessons expressed. Thank you Colin, Annabelle and Adrian for your compelling stories, and thank you GASCo for a great evening. Thank you Neil, and may | remind Strut
co-ordinators, | am always keen to hear news form your Strut’s activities so please don’t be shy —let me know what you have been up to!
STRUT MEETINGS FOR DECEMBER 2016 AND JANUARY 2017
GLOSTER STRUT
Scottish Aero Club, Perth Airport, Scone. Contact: keith.boardman@peopleserve.co.uk
The Victory Club, Lypiatt Road, Cheltenham. Contact: harry.hopkins@talktalk.net 13 December Bush Pilot by Paul Catanach 10 January AGM and 24th birthday celebration From Paragliding to Power Flying by Fiona Macaskill.
SUFFOLK COASTAL STRUT
HIGHLANDS & ISLANDS
Contact:
Highland Aviation, Inverness Airport, 19.30. Contact: b.w.spence@btinternet.com
or 07790 925142
or 07785 244146
10 December Christmas Party 19.00 28 January Burns Supper.
Crowfield Airfield Clubhouse. 19.30.
events@suffolkcoastalstrut.org.uk
or 01381 620535
21 December Annual Chairman’s Xmas Quiz
25 November TBA 27 January TBA.
and nibbles.
KENT STRUT Cobtree Manor Golf Club, Maidstone, Kent.
and Heather Wankowska
18 January Flying in New Zealand by Adam
20.00.
SYWELL STRUT
Contact: gary.james.smith@btinternet.com
Aviator Hotel, Sywell Aerodrome 20.00.
10 December Christmas Dinner at Newnham
Contact: Alan Jackson alan@electricmail.me.uk
court
or 07899 954016
18 January TBA. LINSY TRENT VALLEY
Contact: pilotbarry1951@gmail.com http.//linsystrut. wixsite.com/website 20 January TBA.
VALE OF YORK STRUT
Full Sutton Flying Club Contact: Dave Allen 07973 765552 29 December TBA
NORTH EAST STRUT
25 January TBA.
Fishburn Airfield, 19.30.
Contact: simonmjohnston@btinternet.com 18 January TBA.
WESSEX STRUT
Henstridge, 19.30. Contact: neil. wilson@laa.uk.com
NORTH WESTERN STRUT Barton, Manchester 20.00.
12 December Strut Games Night. 16 January Brian Davies, LAA Chairman.
Contact cliffmort@btinternet.com or 01925 227674
WEST OF SCOTLAND STRUT
14 December Christmas Dinner and Quiz
Bowfield Country Club, Howwood, PAQ 1DZ
(£10.50) 11 January Why the LAA Coaching Scheme matters by Steve Moody.
Contact: nkg@barnbeth.demon.co.uk
NORTH WALES STRUT
Caernafon Airport, Dinas Dinlle.
19.30. or 01505 612493
7 December 70 Years of the LAA by Steve Slater, LAA CEO 4 January TBA.
Contact: Gareth Roberts 01492 478497
ANDOVER STRUT
4 December 12.30 Christmas Social Lunch
Note that some Struts make a small charge
Spitfire Club, Popham Airfield, 19.30. Contact: alan.lovejoy 18@gmail.com 12 December Festive quiz, cheese and wine 9 January Hans’ adventures with the Great War Display Team by Richie Piper.
and AGM.
towards costs for non-Strut members but all
1 January TBA.
are welcome to attend the gatherings. Please e-mail any strut newsletters to me at
OXFORD GROUP
struts@laa.uk.com and, if possible, let me
The Duke of Marlborough, Woodleys,
have a ‘feature’ story from your Strut or group.
Woodstock, Oxford, 20.00.
Thank you. Anne Hughes DECEMBER 2016 | LIGHT AVIATION 47
WINTER AND SAFETY failure, Take precautions elevator SPOT SOME trim over PROTECTION and winter, wing HAZARDS plus spar valve issues spring —
aia With Malcolm McBride
another packedreport
Airworthiness Engineer
uletide Greetings. Yes, here we are again in the last few bars of the annual melody which goes by the title of Another Year in Our Lives.
In my case (and | hope yours) it’s a great tune but, and | don’t want to appear grumpy, the conductor seems to be playing through the chart much faster than he used to. Perhaps it’s just my imagination because, as | get older, | can now get my head around some of the more difficult phrases. As | write the first few lines of this Christmas
edition of Safety Spot, Ho Ho, Hum Hum, I'm reminded of the advice given to me by an old(er) muso friend of mine when | asked him how on earth we were supposed to fit all those notes into one particularly busy phrase. “Oh,” he said, “I only play every other note, there’s plenty of time for that.” There’s a lesson in there somewhere!
| hope that you and those around you are well and you haven't spent so much of your budget on your lovely flying machine (if of course,
youareluckyenoughto ownsuch a craft)that you've had to cut down on the heating. Whilst I’m on the subject of heating, take a look at the picture supplied by LAAer Chris Marsh showing the warm-air engine de-humidifier keeping the internals of his Van's RV-9’s Lycoming O-320 nice and, well, de-humidified. Chris sent in the picture after seeing Mark's article about ‘Winterising your
engine’in lastmonth’sLightAviation.Hewrites: Dear Mark and Malcolm,
| have just read with interest the article on protecting your engine from the ravages of winter, and thought you would be interested in the EICU Engine dehydration system that | have used for the last couple of winters. | purchased the system during a visit to Oshkosh and have been very pleased with the results. Full details can be found on their
website (www.engineadryingsystem.com). After an end of season oil change, | connect up the dehydration system to keep the air in the engine between 5% to 10% humidity. Should a suitable spell of flying weather come along, then it is easy to disconnect, go flying, then
of the original idea of an ‘aquarium aeration pump’ (low flow but designed for continuous use) connected to a box of desiccant and pumping a small flow of dry air through the engine and I’m sure | saw very basic ones like that, either totally homemade or as a kit of bits from a supplier. This particular commercial
not essential). Five hunared dollars isn't cheap, but | guess | am from the Past in LAA terms (VW-powered plans-built aircraft); compared to the cost of building a RV with brand new Lycoming, this is peanuts and cheap insurance! Those pictures show a fairly basic installation
device does seem to have tidied it up and
but | still think it has merit and the idea is worth
adaressed a few of the issues:
broadcasting. You might get someone who has ‘homebrewed’ his own by stealing the kid's
reconnect afterwards. Thanks for the most
@ Pump runs on 12V so it can be battery powered, with the possibility of solar charging
interesting articles in Light Aviation.
so no mains needed; or it can still be mains
of silica gel coming forward to tell us how they
Chris Marsh.
powered with a transformer ®@ Recirculate the air through the engine, so no need for either a huge desiccant container, or frequent regeneration of the desiccant @ Add a Relative Humidity sensor (these are now cheap and easily available) so you know it is working (or at least doing something) @ Package the whole thing (nice to have, but
effectively! Incidentally, at my gliding club (1,500ft up on top of the Long Mynd) we now have a mains power supply to the trailer hitch rail and a lot of the trailers have dehumidifiers (1 take my Slingsby Sky off the hill for the winter and it lives in a barn owned by a former glider pilot,
| asked Mark what he thought about Chris’ purchase and he wrote back explaining: Hi Malcolm,
| have had a look at these before and thought the basic idea is quite good. | was thinking 48 LIGHT AVIATION | DECEMBER 2016
fish tank pump and connected it up to a box
did it, to show that it can be done more cost
SAFETY SPOT (Left) It wouldn’t be December without reminding flyers of the extra challenges winter brings to our sport. Here’s a picture of a couple of the many Safety Sense leaflets that are published by the UK CAA. If you are flying at this time of year these two are definitely worth a read —they’re
where the “climate” is much more benign). Mark.
Mark had a further thought and wrote back the following day explaining, You need to dehumidify the spaces both above and below the piston, i.e. the combustion chambers and the crankcase. The only communication between the two, | think, would be the blow-by path past the piston rings and through the ring
both easy to find on the CAA website.
(Photo Malcolm McBride)
gaps. So if you suck from the crankcase via the breather and return to an exhaust or intake
‘hole’! guess you might get sufficient flow down this route to keep both sides dry. Thanks Chris and Mark for your input, certainly winter can be a killer for aircraft, especially in the UK where temperatures can fluctuate from minus seven to plus ten on an almost daily basis. I’ve had quite a bit
types.
i
or
aimed ataeroplane operations, much |e) The aircraft Flight Manual
of content least equally Oparating. FHandbook ; isthe he toits piston-engined helicopters and| Pilot's rysource information 2 applies Peat Pot: gyroplanes. be mes Flight b) Piston engine induction system : oe only tong iscommonly referred toas leaflet 4ashould contradict corburetter ing. although,2s |
described later, carb icing isonlyone || 2THPES form. Such icing can occur *, cmd OF ICING wd o yt : ree they arehumid. Itcan | induction system icing. ’
ae |
of feedback from Mark’s article, and now
(Middle left) This chart, often shown but always worth the revision time, reminds us that carburettor icing is not restricted to cold weather. In fact, the biggest single cause of icing is raised humidity. If you are flying near to cloud or mist, your carburettor could start icing up even at quite high temperatures. (Photo UK CAA)
(Below) This picture, taken straight from Safety Sense Leaflet 14, shows a generalised induction system and areas
we're roughly mid-winter it’s probably worth reminding ourselves of some of the hazards this season brings.
where ice may accrue. There are three
main types of engine induction icing: Impact icing, which can occur very quickly indeed, caused when super-cooled water droplets hit any surface (like an induction air filter). Carburettor icing, primarily driven by the temperature drop in the venturi (remember Bernoulli) and, though rarer, Fuel icing, which is where micro droplets of water, held in suspension, freeze, which can cause blocked fuel pipes and carburettor jets. (Photo Safety Sense Leaflet 14)
HAZARDS OF WINTER FLYING
| remember a story told me once over a few
beers in a local gliding club which concerns a Christmas prank which, though very funny in design, nearly cost a pilot his life. The idea was to get the club’s Primary glider out, connect it to a tug and complete a fly-past, under tow, of the clubhouse with the pilot only wearing a pair of underpants, a WWI flying helmet and a large pair of vintage motorcycle gloves. If you haven't seen a Primary then just google Slingsby T.38 Grasshopper; no, I’m not saying that was the glider type involved... but it was very similar. Certainly, the machine and the man were both, shall we say, lightly clad. A volunteer pilot was found, there’s always one after all, and the conjoined pair set off on their comedy-act mission, probably both giggling and thinking of the free beers in the clubhouse after they’d returned. Anyway, the pilot of the tug thought that it would be a good idea to change the plan slightly with a tweak that meant that instead of lying round the airfield once (to line up for the ly-past), he’d fly over to the local village and do a low pass near the local pub. Of course, he hapless chap flying the Primary became rozen stiff after just a few minutes and released he tow before passing out, landing, after a
wary
ashion,in a field alongsidea smallhouse. | hink that the lady was rather surprised to see her strange visitor, who was clearly hovering between life and death, perhaps a ghost from a ime when the airfield was an operational base, wobbling on the doorstep. Hypothermia can set in very quickly indeed, especially if there’s any wind chill factor involved.
So that you don’t have nightmares about this, | should conclude the lesson by explaining that both parties survived the experience and lived to fly another day. But a lesson it certainly was... for all concerned.
If you consider, and you should, that
most aircraft accidents involve a pilot doing something wrong, then surely, when it comes to winter flying, if you’re in command, you must make sure that you and the other occupants of
the aircraft are dressed appropriately for the mission ahead. And that might include taking enough gear for a possible night stop. The weather in the UK is, as mentioned, apt
to change in a moment; low air temperatures are just what the doctor ordered if mist and
Og are on the menu. |’m sure that you’ve got your ‘just made it’ stories where winter weather provides the back-drop - | won’t go on except O say that there are a couple of really relevant Safety Sense leaflets available from the CAA’s web page which deal specifically with winter operations. If you haven't read them, please do before flying next. We all should be aware that carburettor icing, the demon in many an aircraft engine failure tale, is not limited to the winter months. Here’s
a tale from LAA Jodel flyer Martin Ferid about a situation he was recently in whilst flying half a mile above the Kent countryside: It was a nice sunny day in October and I'd
arranged to do some stalls and side-slipping with a chap from Rochester in his Europa. As | was ready early and had only flown the Jodel once since returning from Hahnweide in Germany, | chose to take the long way around and enjoy the pleasures of our pastime. There was still wispy cloud from about 1,900ft to 2,400ft which hadn't burnt off yet, so, to
avoid the risk of carb icing, | climbed to 3,000ft and flew around Ashford before heading on track. To get to Rochester involves passing under the London TMA below 2,500ft, so, for the decent, | selected carb heat ‘hot’ for about
30 seconds or so to ensure everything was nice and warm. DECEMBER 2016 | LIGHT AVIATION 49
SAFETY SPOT After another minute or two the engine stopped running smoothly, so | reselected carb heat, which seemed to make little difference. It
took another 30 seconds for the engine to run normally again, but with none of the symptoms (further rough running), normally associated with carburetor icing. This was to happen a further two times before | decided to leave the carb heat knob fully hot, for the entire flight. It did clear, but started again even with the carb heat on hot. By this time, I'd decided to divert to Headcorn, which
was closer and more has more hospitable surroundings, should the engine give up before getting there. By the time | was on final approach at 1,400ft, still with the carb heat out, it started running smoothly again, so | told the controller I'd head for the strio which was about five minutes flying time away. No sooner had | turned, the engine started to miss again, by
which time I'd had enough and just wanted to be down on terra firma. | landed OK and,
after being on the ground for an hour (and cancelling the lesson) | discussed and dissected events with the controller (who was excellent throughout) and one of the aerodrome directors. Reaching no definitive solution, we decided that I’d climb to 3,000ft+ in the overhead and, if all was well head for
home. | got back to the strip without any further problem. For interest: temperature was +14°C and dew
point +9°C, 500ft layer of wispy cloud between
VW derivatives, like this Sauer S2400 UL. The
1,900ft—2,400ft.
Trail, incidentally, has been cleared with two engine fits up to now; naturally, some of the LAA examples, five so far, have been fitted with the ubiquitous Rotax 912 but the other twelve
lf you transfer the dew point and temperature numbers into the classic graph of ‘Icing Probability’ which I’ve dutifully featured, you will see that Martin was flying around in conditions that could generate carburetor icing at any power setting; more especially so because of the wispy clouds mentioned; after all, wispy cloud, in this context, equates to 100% humidity. I've been caught out like this once or twice and | think what happened to Martin during his flight, from the engine’s point of view, is that ice started to build up in the carburetor
somewhere, but not to the extent that it caused
a noticeable drop in engine performance. When Martin selected the carburetor heater
this light icing started to melt and the engine ingested liquid water; there’s the rough running period. Eventually this cleared and the engine started to behave itself again. This sequence of events happened a few times, probably as Martin flew in and out of damp air. Of course, there are carburetor hot air
systems that work well and systems that aren't
(Above) Thanks to Martin Manthey of Sauer Engines for sending this picture of a failed valve spring similar to that experienced by Graham Smith. It turned out, on investigation, that the batch of springs
very efficient at all. If you fly an aircraft that falls into the latter camp, then avoid flying in conditions where carburetor icing could happen. Thanks Martin for sharing your tale.
from where this and a few others had
originated had an operational life of about
GROPPO TRAIL —SAUER ENGINE
15.5hr; premature failures like this suggest
If a bit of ice in the induction system can reduce the power of your engine then imagine
a material failure and as it turned out...
compression disappeared! This tale features just such an occurrence though, because the ‘lost’ cylinder was spotted on the ground before the flight, the issue was just an inconvenience and not an airborne emergency. Hopefully, you can see from Graham’s picture of the failed valve spring, why compression was lost and, to be honest, if this engineering incident just concerned a broken valve spring, the tale probably wouldn’t make these pages. Valve spring failures, after all, happen occasionally, especially on the various
(Photo: Engines) starting (‘Switches broken. has Remember, (Below) gotSauer into Though the Fortunately, OFF engine. though the —Throttle habit slightly it’s He the ofdecided not pulling owner out Closed’), a of bad focus, of to the idea this investigate always engine |to Sauer hope pull through treat that S2400 an when how engine ayou propeller much UL all one can four powered through compression power see compression asthat LIVE. could before Groppo this befelt valve starting lost Trail cycles very ifspring one aircraft weak. before cylinders’ has
on our books have, or are destined to have, the
slightly less powerful Sauer powerplant. So why do we feature this story in Safety Spot? Well, really this is not a tale of bad design or problems with maintenance, unfortunately we return to the ongoing issue of pattern parts... actually, not even really pattern parts, more poor copies of a component manufactured from inappropriate material entering the food chain because the purchaser, somewhere in the chain, was beguiled by the very low price. It is interesting, from the materials point of view, that the fatigue life in service of the defective springs was exactly 15.5 hours’ operation to failure. After the first failure, and the discovery by the manufacture that they'd been duped into buying substandard parts by their supplier, the ‘batch’ was identified and the defective springs replaced. In the UK the whole operation was managed by the Groppo agert, Graham Smith; so well done to him.
The other lesson worth sharing here, the first being so obvious that | needn't waste words explaining it, is that this defect was picked up on the ground by the owner who, before every flight, pulled his engine through each compression before starting the engine. Though this pre-start technique has merit with some engines, the obvious safety issues need consideration; my advice about this is that one
should always treat the propeller as live and ready to bite the unwary. I'm sure that you'll be pleased to know that all the affected engines have now been fixed and the box of dodgy springs is in the scrap bin! BOLKOW BO 208 JUNIOR —WING ATTACHMENT BRACKET FAILURE
(Photo: Graham Smith)
Lincolnshire LAA Inspector, John Cook, sent us a picture he took of a Bolkow 208 Junior rear wing spar attachment that had developed a crack. Initially, even looking at the part under a bright light, the part wasn’t obviously cracked, though there were signs in the surface of the component that all was not well. John cleaned the paint off the part and used dye penetrant to try to see whether the surface marks were just scratches or a crack that passed deeply into the structure of the part. You can see by looking at the attached picture that the part was indeed cracked and needed either repairing or replacing. The idea of repairing the bracket by welding was quickly rejected (trying to weld a high strength aluminium alloy is fraught with difficulties), and in the end a new part was purchased via the ‘unofficial’ owners group led, to quote him
directly, ‘sort of by Stewart Luck who, as it happens, put me in touch with LAA Inspector Andy Harmer.
SAFETY SPOT Andy, who is an expert on the 208 (though he denied the allegation when questioned) explained that there has been ongoing issues
(Left) LAA Inspector, John Cook, noticed what looked like a crack in the rear spar to
/ { € tii fuselage connection of a Bolkow Junior
with this bracket over the years and that there
undergoing an annual inspection, so he stripped off the paint and completed a dye
was a bracket failure shortly after a landing on one machine back in the 1960s. It was thought
penetrant check. You can see the crack
at the time that the bracket failed because
Clearlyas a red line in the chalkdeveloper
it was over-tightened, probably to remove slackness in the wing/fuselage joint. Recent and ongoing issues with this connection really concern wear, and a scheme has been developed to increase the
along the bracket. (Photo John Cook)
attachment bolt sizes in increments from 8mm
to amaximum of 9mm. Naturally it is tempting to remove system play by tightening bolts but, from experience, it’s best to avoid this and look
for better engineering solutions. This bracket has failed, most likely, because the metal has been placed under constant bending stress in a direction is wasn't designed to go. The Bolkow BO 208, which was designed by Bjorn Andreasson, well known as the designer of the BA4B biplane which bears his name, like
(Above) Here’s LAAer Tony Brown’s Bolkow BO 208C Junior at the threshold
just about to open the throttle. The LAA administers eight of the UK’s compliment of 16 aircraft, the ‘lost’ eight Operate on an EASA Certificates of Airworthiness and so
are unlikely to be released onto a Permit to Fly within the LAA system. (Photo G-INFO)
the BA4B features all-aluminium construction.
The LAA looks after all six of the UK registered BA4Bs and eight of the 16 UK registered BO 208 aircraft. Many of these aircraft are now over 50 years old and need careful management,
especially with regard to corrosion in the aircraft's structure. Andy explained that the 208 is a difficult aircraft to inspect properly because access to the internal structure is so
=i/
poor. Another particular issue he was keen to pass on is that the forward aileron cable, where
it passes over a nylon pulley at the root end of the leading edge, is subject to wear... which leads me on neatly into another contro! cable problem affecting one of our machines.
EUROFOX 912(S) —ELEVATOR TRIM FAILURE I've just taken a look at the LAA’s database
and notice that, at the time of writing, we have 47 EuroFOX aircraft on our fleet, 13 of them
owned and operated directly by gliding clubs and used to haul gliders and sailplanes into the air. We began the evaluation process of this type in 2011 and, from all accounts, it was
an improved high-quality derivative of its early 1990s forefather, the Avid Flyer. Glider tow trials, at the time demonstrating a unique ability
(Above) It’s always good if engineers have a heavily-used ‘lead’ aircraft in service
because,if the problemis hours-related, the lead aircraft will be the most likely candidate for problems. This picture, showing a failed elevator trim cable is a good example because the aircraft, a EuroFox glider tug, has accumulated many hours of quite demanding use in a relatively short time. Whilst this simple ‘thimble-less’ attachment would probably
INDIVIDUAL OUTER WIRES WORN 40-50%
(NOTE BLENDING OF WORN AREAS)
befineona lightly-used airframe formany
years, this particular aircraft has completed about 3,000 launches over 800 or so hours in the last couple of years.
(Photo: Ed Murphy) INDIVIDUAL (WORN AREAS OUTER INDIVIDUALLY WIRES WORN DISTINGUISHABLE) LESS THAN 40%
in this classof very lightaircraft,beganquickly and the aircraft was cleared to tow gliders with a maximum mass not exceeding 750kg when the first aircraft received its Permit to Fly in February 2012 —not bad for an aircraft with a maximum take-off weight of only 560kg. Naturally, when an aircraft is put to work like
(Above) To fully inspect a control cable may require removal of the cable from the airframe, because the best way to check
this, albeit in the non-commercial environs of a
gliding club, it’s bound to accrue hours far more quickly than a machine being used for private pleasure. This, in the context of continuing airworthiness management, has its upsides and downsides. Certainly, the maintenance scheduling needs to have a different emphasis than on most other LAA machines, where calendar time requirements predominate, and
this requiresa disciplinedapproachto regular maintenance. One upside, from a private owner's point of view, is that any glitches or
bugs in the airframewill showup on the highusage aircraft and lessons can be learnt.
Take a look at the pictures of the failed trim cable and you will see that this type of connection is bound to fail eventually; even if well maintained. This is because the cable is
being pulledagainsta sharpcornerand, every time the trim is operated, tension is applied
a cable for broken strands is to bend the
(Above) This picture, although slightly out of focus, shows that the cable has failed because it is forced around a sharp 180° bend. Engineers have been expecting a problem with this cable for some time though the actual failure took them by surprise because a visual inspection of the
cable into a loop between two hands and passing a cloth over the cable... watch your fingers! Though some wear along the length of a cable may be tolerated,
especially if there’s no blending between strands, cables must be replaced if it suffers a ‘popped’ core or any broken
cable whilst connected didn’t show any
strands.
issues. (Photo Ed Murphy)
(Photo US Dept. of Transport: AC.43)
to the cable where it suffers a local angular change. This regular bending leads to fatigue
severely each time the trim tab was operated, quickly exaggerating the cyclic damage. The chap who reported this failure explained that just by looking at the cable connection it wasn't possible to see that many of the internal strands had actually broken so, to check that the cable is in top quality condition, the loop in the cable needs to be pushed out of place
of the individual steel strands of the cable.
In the case of this recent failure, the cable’s problems were apparently exacerbated by the fact that the ‘U’ clamp which connects the cable to the tab’s operating horn, was seized so the cable end and was being bent quite
DECEMBER 2016 | LIGHT AVIATION 51
SAFETY SPOT Once | got the aircraft back in its hangar, | could see that the left flap was not connected and, on further inspection | could see that the flap pin had wound itself into the cross tube that is used to move the flap up and down with
and inspected closely by trying to untwist the strands.
Take into account that the pivots need to be free and the whole system needs to be
regularly lubricated... a point well made in EuroFox’s recent Service Bulletin (SB 04/2016) on the subject, which can be downloaded from
the main wheel.
When | de-rigged the aircraft | found the pin and noticed that there was no sign of the required redux bonding in and around the threads of the either port or starboard flap pin, though the starboard pin was tight in (12mm threaded round ended pin in aluminium) and
Alerts section of the LAA’s website.
EUROPA MONOWHEEL — FLAP CONNECTION PIN FAILURE
LAA Engineering has just written to all Europa owners alerting them to a recent control system failure event suffered by one
lubricated.
into the incident:
(Left) Because we were worried about the possibility that there could be hidden
The plane has been flying five years since build and wings are not removed after use. They had been removed for the annual inspection and an autopilot fit in March (about 50 hours ago) and supported in trollies in a flap up position so any wind out of the pin would have likely been obvious but tightness not necessarily so. The bearing in the tube (12mm socket bearing in a 30mm steel tube) was
Dear Malcolm,
corrosion between the steel attachment
intact but has benefited from some oil.
/ experienced an ‘interesting’ Europa flight back from Sandown recently which | think you should know about. On take-off from a bumpy field (after a bumpy taxi) | had a sudden strong port wing down tendency. Rough grass at the runway side was a possibility, and autopilot activity another, but | quickly assumed the flaps
bracket and the aluminium alloy spar cap, we decided to dismantle a damaged wing
The pins are now bonded in and will be regularly inspected and lubricated, and tightness checked during the annual wing
of our memberswhilstenjoying aflight in his Europa Monowheel. The reason for this alert is that LAAer, Graeme Bird, an experienced Monowheel flyer, ended up with an in-flight flap disconnect on a recent trip which seriously compromised safety. Here’s Graham’s report
that had been stored outside for many
years. As you can see from the image above, the bracket lugs themselves are quite corroded. (Photo Malcolm McBride)
were different and wondered if the mono port
wing leg had collapsed. However, as | was already airborne and out of runway | retracted the wheel/flap and all seemed fairly normal. On arrival back at my base strip, | lowered the undercarriage and the strong port wing down tendency reappeared. / tried a few things at altitude, spoke to Luton, and did a couple of high level simulated approaches. The aircraft was controllable if into wind (crosswind at the strip though) so, after
considering options and seeing some people in a corner of the square field that joins the end of our strip, | opted for a landing where there was plenty of room towards the end of the landing run (so the aircraft could skew around if inclined). The landing went normally and | was able, Just, to hold the wings level but, in the last few yards and at walking pace, the port outrigger collapsed and the aircraft skewed to the left.
removal.
Best regards, Graeme. So, it seems that we now have experimental evidence that a Europa Monowheel can fly with one flap up (or nearly up) and the other down. Well done to Graeme for dealing with this emergency efficiently (though | probably wouldn't have elected to land in a crosswind) and letting us know about this via your very clear report.
| spoke to Andy Draper, our local Europa guru, and he commented that this was the first
time he’d heard of this occurrence... having reacted to the event, let’s hope it’s the last. Of
(Left) The flap system on the Europa monowheel aircraft is semi-automatic,
their deployment being coupled to the lowering of the undercarriage. When the single, glider-like wheel is lowered, the flaps follow and in turn, driven by the flap system, the outrigger is lowered and locked into place. In a recent incident, a pin unwound itself from the flap, separating the flap (and therefore the corresponding outrigger) from the undercarriage mechanism. This meant that the final
SARBGERD FLAP
CQTENDD)
ASELAGE
stages of the landing were ‘interesting’ as directional control was lost when the
wing, outrigger-less, contacted the ground. Fortunately the aircraft stopped before contacting anything (or anybody) and there was no further damage to the airframe. (Photo Europa Aircraft)
(Above) We received this picture from Nigel Beale, the previous Eurostar agent, and we were concerned immediately about the level of corrosion of the steel bracket; this is one of the reasons for the spar checks on aircraft in our fleet. This level of
(Left) To orientate yourself with this picture you’ll need to imagine looking down onto a Europa flap; you can see the pin through the inspection hole and its flap cross-tube receptacle at the top of the photo. LAAer Graeme Bird recently suffered a flap system failure when the pin, which should be screwed and bonded into the end of
the flap, wound itself out over time. It was found, after a close look at the wayward pin, that there was no sign of any epoxy. It looks like, probably during the initial build, the bonding part of the operation had been missed out.
(Photo Graeme Bird)
corrosion, particularly on a highly stressed structural member of an aircraft is not
acceptable and needs to be dealt with as soon as possible. Of great concern would be corrosion between the steel plate and the aluminium alloy capping strip, primarily because the oxide could create a notching pressure on the aluminium spar cap which,
in turn, could become a stress-raiser.As it turns out, the surface corrosion seen was
quite shallow and was quite easily cleaned off with a little TLC. Mindful that this is an
important inspection point, the area was reprotected using a proprietary wax-oil. (Nigel Beale)
course, it’s essential on any aircraft that before
each flight the control system is checked, as far as it’s possible, for correct attachment and operation. This is especially true on a de-riggable type like the Europa - for those not familiar with the type from an operational point of view, it should be noted that the landing gear, flaps and outriggers all form part of one system. The primary action, and the mechanical lead, is the direct lowering of the undercarriage. A secondary action, via a direct
mechanical link to the undercarriage, lowers the flaps which, in turn, as a tertiary action, lower and lock the outriggers. Because the connection between the
AAR AIRWORTHINESS ALERT| LAA/AWA/16/06
28" October 2016 Aerotechnik EV-97 Eurostar
Visual Inspection of Main Spar Caps On the 24" June 2006, a Danish registered EV-97 Eurostar aircraft suffered an in-flight structure failure of the port wing whilst flying in mountainous terrain; this accident led to a thorough examination of the materials used in the construction of the main wing spar. Following checks on all UK registered EV-97 aircraft in 2010, a smali number of spar caps were found to be under-strength, these wings went back
to the manufacturer in the Czech Repubtic to have their spar caps replaced. On the 18" September 2016, a UK registered, BMAA administered EV-97 Teameurostar UK crashed in Builth Weils, Powys, whilst on a cross-country flight between Sandbach and Swansea; both the pilot and his passenger were killed in the accident. Close examination of the port wing has revealed that
this wing failed in approximately the same place and in a similar manner to the earlier failure of the Danish aircraft.
Because of the above inadents, the owner of a reasonably high-hour EV-97 example decided to take a look at the wing spar on his aircraft. Initially he did this using a camera, feeding it between the wing and the fuselage after removing the wing fillet; worried about what he saw, he investigated further by removing the wings. He reported his findings to LSA, the UK manufacturer and distributer of factory ~ built EV-97 aircraft, who alerted other high hour (BMAA) users, one of whom has discovered abnormalities in the wing spar that need further investigation before the aircraft can be released back
to service. Because of these two findings, LSA has written to all EV-97 owners registered on their database asking them to visually check their wings; a copy of this fetter can be found
The LAA has issued an Airworthiness Information Leaflet (AIL) (LAA/MOD/315/001 icsve2) requiring all owners of LAA administered EV-97 aircraft to perform visual checks on their aircraft and furnish LAA
engineering with the results of these checks: this AIL can be found Fig. 1. £V-97 - Lower Spar Cap.
undercarriage and the flap was lost, the flap was able to float freely in the airflow, probably partially down. This, in turn, meant that the outrigger, though possibly hanging down, wasn't locked down during the landing; hence
This example, from a 3500 flying time example, dearly shows a
Problem with the paint’s attachment
to the metal. Two issues are present and need further investigation. 1,Buistenng between the sree! Balattachment fitting and theSpar Cap. 2. Cracking in the paint finish which ‘emanates from the Spar Cap attachment rivets.
Fig. 2. EV-97 - Lower Spar Cap It.
the loss of directional control at the end of the
This example, from a low hour
example (< 356 hrs.), shows worrying Signs of corrosion, Take note of:
landing run.
1,What appears tob¢rustonthe surface ofthe steel bracket and the Spar Cap. 2.
EV-97 EUROSTAR —LOWER SPAR CAP INSPECTION
I've just noticed that both time and available space on the page has nearly run out but | do think that it’s worth letting you Know about an Airworthiness Information Leaflet (AIL) that LAA Engineering has recently sent out to all EV-91 Eurostar owners. The AIL itself requires all owners, over a 28-day period, to take photographs of the lower spar caps on their
Page lofi
Uneven paint finish, indicative of
underlyingcorrosion.
(Above) LAA Engineering is increasingly using web-based Airworthiness Alerts to let the wider membership, especially our inspectorate, know about specific issues affecting aircraft within our
aircraft and send the results in to us here.
fleet. The Airworthiness Alert offers the
Naturally, the AAIB are investigating the recent fatal crash suffered by BMAA flyer, Nick
opportunity of providing direct links to related documentation whilst remaining, effectively, a non-mandatory instrument. All published LAA Airworthiness Alerts
Jeffries at Builth Wells. Both BMAA and LAA
are working with the AAIB on this. I've explained the reasoning behind the AIL in the text underneath the pictures and, as usual, if you want to read the full leaflet then you can download a copy from the website.
second menu. From this menu, click on
of Christmases and a prosperous and safe
building, repairing and, hopefully, flying new year. Fair winds.
LAA Project Registration
of their rear spar caps and then send them
in for comparison. To orientate yourself, this picture shows the rear face of the lower spar cap on the starboard wing. The plate that’s bolted to the riveted spar cap is steel, the spar cap itself is aluminium alloy, the steel plate attaches the wing to the fuselage. Notice that there is a large paint ruck between the spar cap and the steel bracket.
Engineers felt that there were only two possible explanations for this: one, that the bracket had moved in service and,
two, that the paint to alloy bond had failed for other reasons, most probably, poor pre-paint preparation. Notice also the paint fracture lines emanating from a number of rivets. This wing was sent for detailed examination by the AAIB to QinetiQ who, after tests, let us know that the reason
for the paint disturbance was poor paint adhesion and that no structural (materials) issues were found. (Photo David Young)
are available from the LAA’s website,
just hover the cursor over Aircraft and Technical and this will bring up a
Undoubtedly there will be more on this story to follow through 2017... which, as I’m just about to drop off the page, means that we've reached the end of the 2016 Safety Spots. | hope that you've enjoyed reading them as much as | have writing them. If ’m careful, and tread carefully, there’s just enough room to wish you the very best
(Above) We received this picture from Light Sport Aircraft which show serious paint disturbance on a quite high hour EV-97 lower main spar cap and quickly issued an Airworthiness Information Leaflet (AIL) requiring all EV-97 owners to take a photo
‘Engineering Alerts and News’ which will open the index page for Alerts. This one,
incidentally, talks about the background for a recent Airworthiness Information
Leaflet (AIL) LAA Engineering has published requiring owners of LAA administered EV-97 Eurostar aircraft to check the lower spar caps on their aircraft: it also offers a link to the AIL that
was sent directly to our 89 EV-97 owners. (Photo LAA Library)
(Left) When we dismantled the outwardly corroded wing attachment bracket from the wing of an early (damaged) wing we were pleasantly surprised that there was no corrosion in the interface between the steel
bracket and the aluminium alloy wing spar: this as you will imagine, was a great relief to the writer! (Photo Malcolm McBride)
Transfer
Kit Built Aircraft
Non-LAA approved design only Permit Initial Permit renewal issue
UPC0450K
sss
i: 1.000kg and above
Modification application
DECEMBER 2016 | LIGHT AVIATION 53
| started my working life in 1960 as a carpenter, apprenticed to my father’s building company, John Pattison Building Contractors. | am very proud of my father who, at the age of 33, had 600 men working under him building two of the Mulberry Harbour caissons that were towed across the Channel shortly after D-Day to form a harbour.
D-Day, 6 June 1944, was quite a day for Dad. The invasion started, so he knew his Mulberries would soon be put to use, it was his 34th
birthday, and to top it all, | was born. The story goes that the sky went black above Swindon with Dakotas and Stirlings towing gliders. 54 LIGHT AVIATION | DECEMBER 2016
Dad ran into the house shouting "Minnie, it’s started," (meaning the invasion) to which Mum replied, "So have | Jack!" That’s why mum chose the name Dudley for me, a couple of Ds for D-Day.
managing director and | was the contracts director; | had a disagreement with Clive which led to me leaving the company with nothing to
At the end of the war Dad started his own
started a model company with a friend which
building business, local to Swindon, with a partner. The partnership didn’t last long (Dad always said the best partnership was just two people with one of them in France!) and he built a very successful business from nothing. He started by pushing a hand cart around the town to collect and deliver the required materials. Can you imagine that today? If
we called Flair Products. Leaving the building
youhaveten menworkingona sitethereare usually ten vans outside. After 17 years, when Dad had retired, my
brother Clive (another carpenter) was the
go to.
About 18 months previous to this event, | had
company was a spur to try and turn it into
something more meaningful. My friend had just been promoted in the jig design office of the local Austin Rover plant and was agreeable to me buying him out. It gives an idea of the scale of this buy-out when | say it was done for £360 for stock, design rights (we had two model designs at the time), and goodwill (not much of that at this stage). So, on the first of January 1977, Flair Products was my only source of income, and a
winner Flitzer commemorate (Main) 1920s and (Above) unique (Below) Later Duds he at Duds Z-1R. 2014, in A Duds’ you! did young winning designed with win Both and (Photo favourite Britain’s an Duds the Albert won the R/C aFury Gary Short trophy at him shot model winning Codling Calshot IIThomas). trophies and Crusader MEET of with Schneider his (right) Trophy of inathe Flitzer. ’81. at model to the his Schneider THE A winner enter, contest Air Rally, Rotec and Squadron and a2003. MEMBERS and radial full-size so trophy was came both believes Itheld engined shouts Trophy in fourth. aircraft. are to 1931 now heis
with new owners.
small one at that. | remember that the turnover
for the first year was £1,500. Jane, my wife,
Ranger from his widow in the year 2000. My aim was to bring the design back to the
and | moved on steadily year on year and
market, but | hadn't realised the difficulties that
the company became very well known in the
would arise from not being able to speak to the designer. After two years of investment of time and funds, | had only just about sorted out the hundreds of drawings Russ left behind when | had to dispose of what | had named The Little Aeroplane Company. After a false start with another purchaser, Paul Hendry-Smith eventually purchased the rights and the tooling, and formed The Light Aircraft Company at Little Snoring airfield. So at
modelling world. My Magnattila, Puppeteer and Cub designs especially became very popular with around 9,000, 12,000 and 15,000 kits sold respectively by the time we sold the company in ’97. Although we were producing about 6,000 kits a year at that time, it was the
model designs that we were best known for, and the kits only represented about 20% of the final turnover of £1.25m. The rest came from
manufacturing and distributing all the other paraphernalia that is needed to get a model in the air.
One thing | did in my ‘retirement’ was to buy the design rights of Russ Light’s Sherwood
least TLAC remained.
Paul and his Dad, Ivor, have performed miracles and now the aircraft, alongside others in their stable, is available as a kit or a ready built microlight aircraft. | am just finishing a
Sherwood Ranger ST and look forward to the few days per year in this country that are perfect for flying an open cockpit biplane. | started SATCo (Swindon Aircraft Timber Company) in ’07 to supply mainly plywood
to the homebuilder. Thiswas a bit likeTopsy and started to take more of my time than |
wanted to give it so | sold it to Tim Wood, who continues to supply plywood, sitka spruce and douglas fir.| am now properly retired - at last.
In the early post-war days when | grew up, the population was very air-minded and Dad started building model aeroplanes with Clive, who was eight years older than me, come to think of it, he still is. So, it wasn’t long before | was building chuck gliders. | DECEMBER 2016 | LIGHT AVIATION 55
MEET THE MEMBERS remember a period during which | walked to The Spot model shop in Swindon and blew all my pocket money on a Keil Kraft Spook or Vega chuck glider kit. | have to say they never lasted long in the hands of an eight-year-old.
to keep on a relatively narrow strip. A Groppo Trail which does exactly what it says on the tin and is a relatively quick build. And the ST Ranger just on being finished. That makes a total of 10 %, but the two CP 16s were really just assembly jobs.
In what, where and when was your first flight?
hold of an Aircraft Soruce and Specialties catalogue. Yes, | know it’s on line, but it isn’t the same as a hard copy. By showing you everything that is available from them, and that is just about everything you will ever need, it sheds light on how many components can be fitted, connected, controlled etc. | found it
When | was 11, on a family holiday to Great Yarmouth, without a word to Mum (who would have vetoed it), Dad took my sister and me for a ride in an Auster which was doing short pleasure trips. | remember the pilot turning off both mags (as | now know them to be) over the sea, | Suppose just to scare us. | don’t know
Which medium do you prefer?
who it was of course but he must have been
Goldwingsto lastalifetime.
an idiot.
Although | prefer wood | don’t mind working in aluminium, having built the RV4, and | have an RV7A kit on order. The ‘A’ variant (nosewheel) is anod to my advancing years. Crosswind landings on a hard runway in a taildragger just seem to get more and more difficult.
others, to build our own aircraft at home with
Was the Isaacs Fury a challenging build?
minimum hindrance from authority. Some think that the rules are too stringent, that we should
My next flight was the following year, on a DC3 taking the family to Jersey for a holiday. | vividly remember looking out of the window and saying “Dad, Dad, look at the wing tip, it’s going up and down.” Dad replied, “That’s good son, if it didn’t it would snap off.” A comforting thought. How did you hear about the LAA?
| don’t rememberhow |first heard of our illustrious organisation. | do remember phoning Bill Rose, who was the Strut co-ordinator for
the Oxford Strut, in probably ’83, to ask to join their Strut. Bill said that the next meeting was the annual Christmas dinner to which | was
most welcome. Bill was one of those people who instantly became a good friend. Jane and | went to the dinner and | stayed an Oxford Strut member until | started the Swindon Strut (now Wilts Flyers) in ’99.
We know that you are something of a serial builder, how many aircraft have you built?
TwoCattoCP16s,onefor a customerand
Wood, it is warm to the touch, light, strong and is so adaptable. Small errors are easily rectified (not that | ever make them of course) and there are none of those itchy fibres flying around the workshop or the nasty odours that attend a composite build. | had enough of that with the
Even though it was my first ‘Group A’ build it wasn't too challenging. | had help from Robin Morton, my inspector at the time, and knowledgeable friends, but John Isaacs’ drawings are just exemplary. As | remember it there is only one instruction note in the whole set of drawings, the drawings are so good they don't need instructions, assuming the builder can read a drawing of course. One or two things | struggled with but | didn’t contact John as | didn’t want to bother him
with questions. At that time | was running Flair and was sometimes plagued with unnecessary questions from modellers, so | knew how he might have felt. | was probably wrong as | met him when the aircraft was nearing completion, and unlike me, he was a real gentleman. | have
invaluable whilst building the Fury. | have read many books written by pilots of both world wars but First Light by Geoffrey
Wellum,whowas afighter pilotin the second world war, is superb. A review on the rear dustcover stated that the reader felt as though he was in the cockpit at 20,000 feet with the author, and that’s very nearly true. A far more relaxed and gentle read is An Aeroplane Affair by John Isaacs. Just lovely.
How has the LAA helped you? Just by being there and allowing me, and many
be more like America which has a much more
relaxed attitude to ‘experimental’ aircraft. | disagree. | know that waiting for a modification to be passed can sometimes take an age, and | have personal experience of getting a design stressed and accepted by the LAA (and | know why it is called ‘stress’ now!). But we don’t get the nightmare aircraft that you sometimes hear about coming from the States, where, as | understand it, there is sometimes only one inspection right at the end. How can that be a proper inspection?
When do you start planning the Homebuilder Centre for the Rally? Usually on the last day of the Rally —| target people to establish if they want to be there again. So that is really the start for the next year, but then it goes quiet until around March when | start trying to get exhibitors.
one for me which | wasn’t brave enough to fly - have you seen one? Three and a half Goldwings, a microlight well ahead of its time in the early ‘80s but with totally uncoordinated controls. The half came from me finishing one for another agent. An Isaacs Fury ||, a superb airframe ruined by my unfortunate choice of a poor second-hand engine. A Van’s RV-4, just
Any aviation books you would recommend? There are the Tony Bingelis instructional books of course, | found the one covering instruments
brillant with a CS prop. A Stummelflitzer Z-1R,
was very useful when | built the RV4.
put three appeals in the magazine earlier this
a stunning aeroplane but | didn't find it easy
| always recommend that new builders get
year, as | had so few confirmed exhibitors. All
56 LIGHT AVIATION | DECEMBER 2016
many awards now around the house but two
items that | prize above most others are two congratulatory letters received from John about my efforts building his design.
Is that a challenge? That is a nice understatement. Isn't it a strange quirk of folk that when a general appeal is sent out there is little to no response. Brian and |
FLIGHT TEST (Left) Duds was a Goldwing agent but built this example for himself. It was different, but well ahead of its time. (Photo Pete Huntley) (Below) The Fury Il was a lovely aeroplane after an initial engine problem was sorted. Pooley Sword winner 2000 and Albert Codling Trophy winner 1993. (Photo Bob Grimstead).
that magazine space brought forward just one person willing to show his build. The strange thing is that once you get exhibitors there, they enjoy the experience. Far more pleasure is gained from the Rally when you are actually a part of it. Useful contacts are made, sources for hard to find items are passed on from some of the hundreds that pass through the tent, and a good time is had by all. I'll be looking for exhibitors again very soon —so please do think about bringing your project or parts.
Minicab, and MW7.
Favourite? That’s a difficult question. The DR400, RV4 and Jungmann would all be pushing for the top spot but for different reasons. The Robin is just such an easy aeroplane to operate, is roomy and comfortable and has a useful cruise speed. The RV4 handles incredibly well and goes like a rocket but it isn’t really an aeroplane that passengers would enjoy. And what can | say about the Jungmann? A wonderful aircraft that oozes
tendency to go over onto their back if the stick wasn’t hard back on landing. It wasn’t nice to fly and had a very high stall speed. It had gained 18kg somehow and the undercarriage was in the wrong place. Besides that it was perfect! How it ended up | Know not, as it was sold. | know Mike Whittaker and | am sure
that this example was certainly not as he had intended it to be.
My logbooks show 3,100 plus hours spread over 36 types being: C120, C150, C172, PA12,
character.
PA18, PA19, PA28, D120, D150, DR400,
spot would be the Chewvron and the MW7
When | was a microlight instructor one of my students bought a Chewron and wanted me to train him on it. | was operating out of Redlands near Swindon, which has a 700m strip. It wasn’t really long enough as the motor was a Konig of only 40hp. Flown solo it was fine but when dual it was marginal. In the end, after three or
Best forgotten? The two vying for this
Rotec Rally 2B, Goldwing, Turbulent, Condor,
but neither due to the design, more the
four sorties, | refused to do it at Redlands so
Starduster Too, C42, T600N, T300, Isaacs
circumstances in which | flew them, so it isn’t
Fury, RV4, StummelFlitzer Z1Ra, Groppo Trail, Rans S6, Chevwvron,Skyranger, Starduster, DH82A, Jungmann, Wagabond, Superfloater, Sherwood Ranger, Jabiru, X’air, Bolkow Junior,
really fair. | will explain. | was asked to test fly an MW7 that was at Lower Upham (Wilts) where | am based. Francis had warned me that they had a
arrangements were made to take it to Membury Airfield (where the Chewron was built). | was still uncomfortable as it meant flying over the M4 after take-off at a low height and an abysmally low rate of climb. DECEMBER 2016 | LIGHT AVIATION 57
MEET THE MEMBERS
| am still flying the Groppo Trail that | finished last year and | will fly the Sherwood Ranger next year, as | will keep it tucked up in the garage at home over the winter. The plan is to sell the Trail when the RV-7A is nearing completion, as | only have hangar space for two aircraft and | don’t want to own three at one time as | have
done previously. With three it seems that every day one of them needs to be insured or have a permit renewed!
remain so to this day, even though, within Bob’s hearing, | would tell Mike who worked for me at
had to fly up to 20,000 feet in open cockpits and fight as well. It doesn’t bear thinking about.
the time, not to worry about the finish too much
on Bob's plane as it was only a microlight and | didn’t have to fly it anyway! The other was winning the Schneider Trophy on my first foray into air racing. It didn’t go down very well with one old racing hand. | had a secret weapon of course, Barry Conway. Barry had been a Hunter and Phantom ground attack pilot in the RAF before going onto the
Whilst carrying out a formation landing in my Robin, on the right of Pete Smoothy’s Robin at
Leicester,| got ina littletoo closeto Peteand got caught by his wingtip vortices which rolled me to the left. | passed behind Pete and went around for an uneventful landing but it taught
meto stayjusta littlefurtherawayin future!
heavies. When he retired, he built a beautiful WAR Series FW190, which he still flies. When There are two that will remain with me forever.
| asked Barry how he could so accurately
Onewas aflight in my Goldwingwhen|
direct me across the course at 500 feet and
was accompanying Bob Simpson, also in a Goldwing. We were returning to Bob’s strip at Ledbury on a perfect summer evening. The light mist forming in the hollows of the landscape gave an ethereal touch to an extremely smooth flight. The best form of flying is probably two similar single-seat aircraft together.
140 knots, he replied that he used to do it at 400 knots in a Hunter! That, added to my pylon model racing knowledge (the same principles apply), seemed to give us a worthwhile advantage.
Not one particular hero but people like Albert Bobwasthen afruit farmerand boughta Ball, Mick Mannock and even Richtofen. Pilots Goldwing kit from me on the understanding that in the Great War flew aircraft that were not he would help me build it through the winter the most reliable of machines and had similar when he had a quiet period (thereby keeping the around costtoo down). Webehind became firm friends and go landed ifclose they are in any and doubt ran into at all hisofStarduster. making performances a safe Not unreasonably landing. to the (Photo aircraft he Peter we urges flyMarch) today. pilots They to
Does drinking count?
Yes several really, all of which a well-known but people still ignore them and damage aeroplanes. 1 Always land a nosewheel aircraft as if it is a taildragger. That nosewheel isn’t there to land on, it is just there to prop the engine up. 2 If you do a bad landing and bounce, open up and go around. If you hang on for the third bounce it will probably do damage. 3 Never hesitate to throw away an approach and go around. With some pilots it is almost a matter of pride not to go around but if you have doubts and press on regardless, it can ruin your whole day, or maybe someone else’s. That final point was well illustrated in an accident | was involved in at the Badminton Air
Day in July ’89. A misty start to the day delayed attendees’ departure, so when it started clearing, everyone arrived within a short space of ime. At the time of the accident there were 27 aircraft in the circuit. The Luscombe that
anded after me (in the Starduster), should have gone around, but didn't. | didn’t know anything about it at the time, waking up some days later in intensive care.
Three factors collectively saved my life. was wearing a Peltor helmet (Peltor very generously gave me a replacement when | started flying again), an ambulance was on hand with oxygen to help me breathe (one of the many injuries was a punctured lung due o broken ribs), and at 45 years of age | was as fit as a fiddle. My aim, during a very long recovery, was to attend the next Badminton Air
Day in my own aircraft. | just made it. It was the first cross-country | did in my newly-acquired Jungmann.
Visicover is a unique service that lets you
58LIGHT AVIATION | DECEMBER 2016 e
To go find toinsurance buy Visicover.com out and manage more online whenever your aeroplane it suitsoryou. helicopter
+die
Authorised and regulated by the Financial Conduct Authority His y
DELTAIR. AE ROS PACE a MITE D
"
(WHatigosen %7
Nose wheel, Tailwheel, factory builtfly microlight, Glider Tug
PropTypes
Engine Types
Clawaalll
Lycoming
McCauley
Continental
Solaolal ela)
Gipsy
FaireyReed
Pratt and Whitney
De Havilland
.and many others
Polyfibre covering with factory paint finish Approved withRotax 912UL, 912ULS, 912iS and 914UL y
“
Factory built microlight available Q4 2016 Fast build LSA kit option for 2017
BREEZER®
Quality, Comfort, Performance
~ LAA Members welcome
Help/Advice no obligation EASA/CAA/FAA APPROVED OVERHAUL OF AIRCRAFT ENGINES, PROPELLERS & ANCILLARIES
Type responsiblefor safety with the CAA regardingall Gipsy Engines. BCARA8-21Approved GipsyPartsManufacture. 17 Aston Road
Tel: +44 (O) 2393 255 255
Waterlooville
Fax:+44(O)2392255534
ae
.
RL
TD
bel
7 Doolittle Yard,FroghallRoad,Ampthill, BedfordMK45 2NW
Tel: 01525 717185 Fax: 01525 717767
Paponic SEdeltair-aerospace.co.uk Soles eras e-mail:info@traffords-insurance.co.uk PO7 7XG Web: : ; United Kingdom Solera even ateme-Veltow NCU Cll(a www.aircraft-insurance. co.uk
SOL
EMOkc merase 0) Next: N511231 W0030216
fake Cail Yeovilton APP on 127.350 4
Sree asaorbit certificate, which can be activated at any
oiey Seen
easyplanningandsafe BS 3s
navigating oniPad, iPhone, v Android and PC.
This year, give the gift
3 Sn
COE
Available on the
DSGoogle play App Store DECEMBER 2016 | LIGHT AVIATION 59
A?
MAIL ORDER
ORDER ONLINEAT WWW.LAA.UK.COM
Please callthe officefor availability andto placeyourorder (Pp & p £2 perbook)
LAA ENTE TARER RSS TS SREP RET ERERNEE
“CLASSICTECHNICAL DATA”’
ACD OFTECHNICAL INFORMATION FORTHE BUILDER AND RESTORER LAA Aircraft Log Book LAA Engine Log Book CAA Rrapeller
£11.50 £11.50
— “Northern AeroplaneWorkshop/ PFAData sheets i Datasheets onearlyconstruction techniques andparts f % PFAHandbook 1980 b andboo
LogBook
£14.95 i The compendium ofhomebuilders information foramateur constructors
LAA Log Book binder
£14.40
“SopwithEngineering Symposiums
Clases: Technical Data
LAAPilot’sFlyingLogBook
£9.95
panels On.consttuction practices: “BrownBrothers AGSPartsBook
reyaranccacacnenscea ms ierienenan he eetme ‘ i
Post Free
—enstation
The “bible” showing all AGS,and other British standard aircraft parts and material specifications of the 40s and 50s.
«Sopwith Pup Rigging Manual For those of you with a Sopwith Pup!
Air Registration Board Civil Aircraft Inspection Procedures A series of data sheets given to all builders in the 1970s
POOLEYS
LAA HERITAGE PLANS
PILOT'S FLYING LOG BOOK
NOW ON CD £50.00 EACH incrostace
FLIGHT GUIDES & AVIATION
WORLD DIRECTORY OF FLIGHT AVIATION
AFE VFR UKFlight Guide 2017, spiral£26.95 | £6.99+ £2.50ptp Pooleys UK Flight Guide 2017, spiral Lockyears Farm ‘Strips’ and Private Airfields Flight Guides (plus £2.50 p&p on flight guides)
£26.99 £19
RO LR EE NEE eR
CHARTS £15.99 each -Post FREE
CAA UK VER 1:250,000 CHART
CAA UK VER 1:500,000 CHART
1 North Scotland
-West
2 North Scotland
- East
_
f
<
i q
3
1 SouthernEngland
&Wales
2 NorthernEngland
&Northern Ireland
3 NorthernIreland
7
3 Scotland,Orkney
4 The Borders 5Central England
of
>,
&Shetland
& Wales
6 England- East 7 West England & South Wales
8 England - South
60 LIGHT please AVIATION |DECEMBER see 2016 website Tel: 01280 or 846786 call www.laa.uk.com for details < is
AUTHORISED DISTRIBUTOR
ROTAX. AIRCRAFT ENGINES
Microlight trial flights @) Email licence PilotAware Join flyren12@gmail.com us or SUNFLIGHT.INFO hire incheck Murcia our and out aircraft. Spain training ourwebsite to For tel. progress full 07775 ininformation the 742582 your sun
Featured Engine
912iSc Sport T00HP 4-Cylinder & 4-Stroke See the full range of Rotax Engines on www.cfsaero.com
All Protect -Support &with service Genuine Genuine Your by qualified Warranty and Rotax Rotax iRMIT Aircraft Rotax and Your iRMT Trai Engine Spares Investment personnel Spares ‘wentes Picthverare com
The LAA and RAeC Award
Winning Conspicuity Agreat w%, System. present for Christmas... Latest Software release gives
or at any time.
Includes first years software licence. £12.00 per
CFS AEROPRODUCTS LTD
C EGS rotax@cfsaero.com AERO
year for second year. Prices ex vat
+44(0)24 7630 5873
www.cfsaero.com PilotAware (TX/RX)
access to your and favourite improved
ADSB FLARM* Mode C/S (Rx)+ (TX/RX) (Rx)
Navigational System.
*FLARM mouse required.
Approved Rotax Support Centres Air-Masters www.air-masters.co.uk Eccleston Aviation www.ecclestonaviation.co.uk
Sales Information www.pilotawarehardware.com www.pilotaware.com 1 (TX/RX withsuitable transponder)
DECEMBER 2016 | LIGHT AVIATION 61
DECEMBER ey
Ve SLINGSBY based Recent ay Hinton engine VENTURE Airfield. overhaul. | ARC with £8000. tillMarch T Contact hangar, 2016. 01280 706272.
Wa ga
ee i
<
Light Aircraft Association
ee
we
+ Sen
For all display or commercial advertising enquiries please contact
www.sonexaircraft.com
Neil Wilson: 07512 773532
OUa
neil.wilson@laa.uk.com
AA5 GROUP Gamston. Only 1/6 shares so great availability in four-seat tourer. A/F 2100 hours, Lycoming O-320 150hp with only 300 hours since TBO. Now for the first time —non equity shares £50 p/h and £120 p/month. 25 hours up front = £1250 to fly off over 12 months. Details: www.gbcpn.co.uk
You can email your classified advertisement direct to the LAA
at the following address: sheila.hadden@laa.uk.com Deadline for booking and copy: 20 December
If you would like to place an aircraft for sale advert please see details below:
ADVERTISEMENTS Up MEMBERS’ to 50 30 words words:with £6; 31-50 a coloured words: photo: £12 £45
SKYRANGER CLASSIC £23,500 2004
Tel: 07976 802107.
Skyranger Classic, converted to Swift in
JODEL DR1050 G-ATWA. One_ sixth
2014. Owned this aircraft for 10 years.
1672 hours.
flew beautifully. A great first aircraft, but
new cylinders. Based at Nottingham. £3250. £95 per month. £48 per flying hour.
now | want to move on. Rotax 912 UL.
Engine hours 760. Recent new tyres. Two
NON-MEMBERS’
x 30ltr tanks. External fuel filler. No heater.
ADVERTISEMENTS
Serviced mainly by Airmasters. Xlam skins, including outdoor protective cockpit covers, including own design graphics. New
Up to 30 words: £22; 31-50 words: £44 Up to 50 words with a coloured photo: £60
For all classified advertising, please send using the form downloadable from the LAA website (www.laa. applicable, uk.com), together to: LAAwith Classifieds chequesTurweston and photographs Aerodrome, if
share. Airframe 4875 hours. O-200 engine
Just returned from the LAA Tour of Britain,
Microavionics mm 030 tail strobe. 8.33 kHz
radio. Trig mode S transponder. Garmin 196 and Aware. Lynx interface incl. recently
New alternator
and
recent
Permit valid until 18/08/2017. Contact Trev Williams 07765 140796 or Email: trevwills@ btinternet.com
POPHAM BASED Jodel DR105. Eighth share £2750. £55 monthly and £48 hourly wet.Well run group with good availability. Contact Jon Boon at jonboon @talktalk.net
Nr Brackley, Northants NN13 5YD
serviced headsets. Permitted until June
PA17
Tel: 01280 846786 Fax: 01280 846780
2017. Hangered at Little Gransden airfield.
Enstone. One tenth share for £2000. £40
www.laa.uk.com
VAGABOND.
90hp._
Hangared
Contact: Peter Mailer H 01480 211693. M
per month and £18 per hour dry. Friendly
07748 614874.
group.
Instruction
available.
Call
John,
PROJECTS 07752 485887. LAA Engineering advice to buyers: ZENITH 650-B EMPENNAGE KIT. Barely started project already registered with LAA. Complete airframe plan set and some tools
AIRCRAFT APPROVED? Members and readers should note that the inclusion of all advertisements in the commercial or classified sections of this
magazine does not necessarily mean that the product or service is approved by the LAA. In particular, aircraft types, or examples of types advertised, may not, for a variety of reasons, be of a type or standard that is eligible for the issue of a LAA Permit to Fly. You should not assume that an aircraft type not currently on the LAA accepted type list will eventually be accepted. IMPORTED AIRCRAFT?Due to unfavourable
to build. £850 call Mike on 07850 576438
AERONCA 11AC CHIEF S/N 1376. Built 1946. 4545 hours total time. Continental
for more info.
A-65 99.5 hours SMOH. Macauley metal propeller. Up to five hours fuel including reserve. Docile to fly and land. Toe brakes.
Paris-Nice. Needs engine driven pump, instrument panel re-assembly, engine remounting. Transportable. £4,500 ono. Tel:
Steerable tailwheel. More details from Les
07710 352289.
Richardson01494772669 lesrich @freeuk.
STAMPE SV4 PROJECT currently housed in a custom-built store,
experiences, the purchase and import of completed homebuilt aircraft from abroad is especially discouraged.
it should borne in mind that technical details,
FREE GA Classifieds
under ideal conditions. It is wise, therefore, to seek
the opinion of existing builders and owners of the type. You should also take your own skill and circumstances into consideration when calculating build times. The manufacturer’s build time should be
taken as a guide only.
in a wood,
in
south Devon. For sale due to age and
TIME TO BUILD? When evaluating kits/designs,
performance figures and handling characteristics are often quoted for a factory-produced aircraft flying
EASY PROJECT for sale. Jodel D120A
Find & Sell Aircraft | Equipment | Services
unavailability of adjoining ground (potential flying field). Fuselage built some years ago, but never flown. Two sets of wings needing rebuild. Renault 4PO5 engine, stripped for inspection. Many new parts, also some
duplicated. Design improvements, —to improve aerobatic performance, believed to be for the son of the designer, and known in
Tel/Fax: EiCAA Email: PropellerSellerUK Accident merlin www. approved 01767 chris@merlinengineers.co.uk M: merlinengineers.co.uk damage 650824 07899 welding engineers 943 and Fax: service Ed 937 restoration @PropellerSeller 01767 (mobile) ltd 650048 France as “le monstre”. Please call or email for details — 01822 840 515 a.thorne111@ btinternet.com
AMATEUR BUILDING All LAA aircraft builders
he would not be permitted to commission someone
STEPHEN AKRO LASER Z200 Project. Flying from 1998 until 2014. 325hrs airframe. Just been recovered and repainted. No accident damage or competition abuse. Complete Wing/fuselage/Lycoming A4A engine. Most instruments and parts to complete. No propeller, needs few cowling panels remade. Email peterjbegley@
else to build his aircraft”. An aircraft built outside the
hotmail.com
CAA’s definition could result in an expensive garden
Keynes. 07745 975 877. £20,000 ono.
and potential builders are reminded that in order to qualify for a LAA Permit to Fly, homebuilt aircraft must be genuinely amateur built. For these purposes the CAA provide a definition of amateur built in their publication CAP 659, available from LAA. An extract from CAP 659 reads “The building and operation of the aircraft will be solely for the education and recreation of the amateur builder. This means that
ornament.
for
details.
Located
Milton
EEZIWEIGH & LIGHT AIRCRAFT SERVICES
Aircraft Weighing - LAA Permit Inspections Dynamic Propeller Balancing
MIGL Avionics
Aircraft Repairs
We stock the full range of MGL Avionics
Hi-tech roll on/roll off scales for your
instruments including the new
safety & assurance
iIEFIS Touchscreen
With a full W&B report
www.lightaircraftservices.co.uk www.eeziweigh.co.uk Call Roy Sears 01543 482063 or 07976 602110
Special Aviation Services Tel: 0116 2885643 Mob: 07564 192942
www.specialaviationservices.co.uk kevindilks912@btinternet.com WOODCOMP
UK Agent
parts4aircraft.com 028 9266 7187
iM r
Rotax Aircraft Engine Maintenance « LAA Inspector
Qdwindon AircraftCimber Fompany Tim@aircraftplywoodandtimber.co.uk SATCo Birch Ply e
: gu
Advice e
i
oad ;
Balsa
Aerolite
6
GL.1
®
Aerodux
BirchPly
e
®
+44(0)1454 317 877
+44(0)7792 412 659
GaboonPlywood e OkoumePlywood e Permagrit Tools e RECENTLY RETIRED established inspector available for permit inspections and general help with projects etc. Workshop facilities and hangarage available. Essex Norfolk
sporty'sacademy, inc. Learntoflyhere’. Train in the U.S.—Student Visas Available
and
¢ Acceleratedtraining * Experiencedflight instructors ¢ Safe,moderntraining aircraft» FAAapprovedfor Private,Instrumentand Commercial(single & multi)
Suffolk areas covered.
John
¥
>
8
ei,
Secure Light Aircraft and parts, classic Push teke-Ts
_transpart. U.K.andnearContinent. Service provided by Sota olsmdcat nsiade. WestSussex based. _
Bae otcaicia
eo ee
Cook
07817 543 754 or hatzflyer2@gmail.com
¢ Pilot and medical examiners on site « Cincinnati metro area
sportysacademy.com fax:1(USA)513.735.9200 phone:1 (USA)513.735.9000 ClermontCounty/Sporty’sAirport Batavia,OH45103 USA
OOS ats) re-Flight Time ©Improve Engine Starting * Reduce Maintenance Costs * 500+ Patterns in Stock! Recognised suppliersto: BAESystems Ltd- MOD/NATO «Raytheon Systems Ltd
T:+44(0)1377267426- F:+44(0)1377267477 www.cambraicovers.aero « info@cambraicovers.com
RobMartin | Composites Engineer | 07709 448393 |
|
rob.martin@live.com
oo
HAMPSHIRE
MISCELLANEOUS IRVIN PARACHUTE type EB80.
|
Maroon
back pack with bag. As new, never worn or deployed. Full refund if it didn’t work. £500. Andy 07850 071 302 Little Gransden.
CAA ApprovedWelding Services Mobile and WorkshopBased Accident DamageRepairs Mark Parkinson
Mobile: 07833602430 Email: buddha2469@gmail.com Durley Airstrip, Hill Farm, Durley, SouthamptonSO327BP
Make dreams fly, visit our website www.LAA.uk.com DECEMBER 2016 | LIGHT AVIATION 63
www.lynx-avionics.com
0
website check details our for
Genuine Bing parts.
Discount engine parts. 2nd hand parts. Ser\
'
Ideal for
flyrite, windsocks; Windsock,Manufacturel,
GQorar — NEWTON Tel..
eOl P
;
01981
PROPELLERS
(uuu ontinnnnnnnnnnnnnnnnnne
510330
Email..allenhaseldine@msn.com
Vx" VirtualAerospace
Cham Cy
=|
SAS)ld College House Craswall. Herefordshire.
RRS 1R2 0fN
ea de
; POOLEYS
Replica
EQUIPME
—70 Years —
Aone
0044 (0)7855 452097
WWW.
.com
64 LIGHT AVIATION | DECEMBER 2016
py
7
www.sidcotflyingsuits.co v F
<076
Light Aircraft Association
www.laa.uk.com
Taking you Places
THE ULTIMATE LIGHT 4 SEATER AIRPLANE NOW AVAILABLE IN THE UK. The Airplane Factory proudly brings you the full range of Sling aircraft. Introductory pricing from £34, 000 for a Sling 4 airframe kit and £25,000 for a Sling 2 airframe kit. Builder Assist facilities available. Pleaseemail us on sales@airplanefactory.co.ukfor further information.
+27 11 948 9898 | sales@airplanefactory.co.uk
BBall NaeaeCenk elas
The Airplane Factory UK
pure PERFORMANCE
www.airplanefactory.co.uk
absolute QUALITY
Wheels & Brakes
High
\ lee2 ach |
Pe
' oy Se
raftt components
precision airc
-designed for performance, engineered for reliabilityandbuiltto last. FUEL SEEEG ORS
PUMPS & FILTERS
GASCOLATORS CHECK& DRAINVALVES
W]el=¥-1 (Vee) ae www.beringer-aero.com sales@beringer-aero.com
7)
LAA approved
Want to improve your skills
and set yourself a challenge ? Earn your LAA WINGS!
_www. Bronze, laawings.co.! Silver andGold Awards KK available = eB os
Find out more by visiting oe es
Telephone: www.andair.co.uk Fiwww.facebook.com/AndairLTD +44(0)2392473945
~
DECEMBER 2016 | LIGHT AVIATION 65
By SteveSlater
e’re rapidly reaching that time of the year where we all look
back at the past events and start planning for the future. For me, having just clocked up my first year as the CEO, this is particularly important as it is time to ask, how are we doing? Well, we celebrated our 70th Anniversary in style, with an enhanced LAA Rally, the building of the Sling aircraft in seven days, and a host of other strut and club events around the
country including the splendid Round Britain Tour. We then ended the commemorations with
a glittering LAA 70 Dinner at the RAF Club in
“Our intention is to
make the AGM a proper
day out, with free
landings for airborne visitors, the presentation of both Rally and LAA Service Awards, and
Nowhere was this enthusiasm better
demonstrated than by our Patron, Prince Michael of Kent, ahead of the inaugural presentation of his trophy donated for the ‘Best in Show’ at the LAA Rally. His detailed 15-minute speech, praised not just Alan James’ efforts in building his Isaacs Spitfire, but pointed out some of its features and the standards of woodworking and craftsmanship to achieve them. | also understand (not being on the top table myself) that his dinner conversation demonstrated an equal knowledge of vintage cars and vintage motorcycles too! The LAA AGM of course raised passions of
two excellent guest
speakers”
Arthur Ord-Hume and WW2 Lancaster bomber
pilot Rusty Waughman DFC. Both the latter held us spellbound with their memories, while among the 30 arriving aircraft were Wendy Hinchcliffe’s Stits Playboy, flying in to collect her trophy for Best Classic Homebuilt at the Rally, and Lucien D’Sa’s seven-day Sling aircraft, returning to Sywell resplendent in a brand-new red and white paint scheme. Looking ahead, what will the new year hold in store?
a different kind this year but the debate didn’t
Well first of all, subject to the LAA Board ratifying my proposals for the 2017 budget, | intend that the year ahead will see no changes in membership or engineering fees. Although we are likely to face increases in areas such as CAA administration charges. | believe that by keeping a close eye on our expenditures we
distract too much from what was another highly
can continue to balance the books for 2017.
successfulAGM.It is certainlynow a far cry
We also need to respond to a changing membership profile. While our member numbers remain steady at around 7,500, the type of member is subtly different to what it
from those rather dull moribund meetings that the title sometimes signifies. Our intention was to make the AGM a proper
day out, with free landings for airborne visitors, the presentation of both Rally and LAA Service Awards, and two excellent guest speakers in the form of ULAA and PFA founder member 66 LIGHT AVIATION | DECEMBER 2016
types.
Many owners have indicated they would like
to know a littlemoreaboutwhatis goingon ‘under the skin’, so we intend to address this
by developing additional training courses and seminars. We're still working on the plans,
so bearwith usalittle longer,but we hope to roll out in the spring, a series of owner maintenance, engine and airframe courses, some potentially type-specific. If you're interested in attending any such courses or can offer specific expertise, drop us a line to LAA HQ, we'd be delighted to hear from you.
London.
The latter event | know was deemed by some members as ‘not their thing’, or a bit London-centric, or even ‘a bit too posh’. Well, as someone equally happy sliding around the hangar floor in a set of grubby overalls, | can see your point, but it was much more than a posh dinner. It marked around 80 members, rom all over the country, including a number of guests nominated for special service to he Association, getting together to share our passion for aeroplanes.
aircraft which they have bought, either former homebuilt types or former certified heritage
was a few years ago. While around 15% of
members are still actively involved in building or rebuilding aircraft, a steadily increasing proportion (6G0%-+) are owners of Permit
There are also some interesting developments to come, reflecting some of the newer, more capable types now prevalent on the LAA fleet. For several years we have
been working hard to gain CAA approval for selected Permit aircraft to fly at night and in IFR conditions. | am delighted to say that is now close to fruition and we are also making some progress in potentially enabling the wider use of LAA types for remunerated flight training. | hasten to add that this doesn’t mean that
fleets of LAA aircraft will suddenly appear in flying schools, but there are good reasons why some LAA types could enhance flying club operations. One key safety benefit is that a student or qualified pilot can be trained ina flying school environment in the type of aircraft which they are going to operate in future, thus reducing the risk of an accident in the first few hours of solo operation. Another is the ability of flying clubs to replace ageing airframes with newer, more attractive and cost-effective alternatives for
PPL hire, particularly in terms of running
costs.Stretchingthings alittle further,why not encourage greater involvement through the
construction of an aircraftby a flyingclub? This model has already proved successful with glider tugs constructed by gliding club members and then operated on Permits to Fly, why not widen the scope to include flying clubs too?
In closing | would like to wish you and your family the very best for the festive season and, looking forward, a very happy and fulfilling 2017.
9 (0)20 8207 3749
eeoe)‘@) ie a o¢ =)
-44(0)208953 2512 i!:sales@pooleys.comeeee Se ee
: anes -+44(0)20 8953 2512 TREC NORCO
OE eeoe ee
Beee BaeSO a Aare
Pooleys Flight Guide United Kingdom 2017 —plus1yeariPlates subscription available Prices held for 2017 Now Features:
« Morethan 930LandingSiteEntries ¢ Over 450 Aerodrome Charts
- EveryPlatere-mastered& GraticuleTicksAdded Availablein 4 versions:
<
Hew at}
el
2017
SpiralFlightGuide £26.99plusiPlates£36.99
Bound FlightGuide £26.99plusiPlates£36.99
Loose-leaf Flight Guide £36.99 plus iPlates £46.99 Loose-leaf Flight Guide with Binder £46.99 plus iPlates£56.99 iPlates oneyearsubscription only£20.83+vat£24.99
|
ACCESS TOTHEPOOLEYS FLIGHTGUIDEWITHINAIRBOX,
Pooleys Pilot's Diary 2017
SKYDEMON & POCKETFMS ARE SEPARATE CHARGEABLE
NavyBlue£8.99 Leather DiaryCover £12.95
SUBSCRIPTIONS AVAILABLE THROUGH EACHPROVIDER ANDNOTINCLUDED IN OURIPLATES SUBSCRIPTION CARD.
is an Official Distributor for Bose A20 Aviation Headsets
mm and — 4
MDPOOLEY'S is an Official Distributor for
Portable
11Unique stylesavailable from£174.00 incVAT
Sa ATT You'll Shopsat: 130. also 92Cranfield ses findour ae nS products | EOP Elstree at | Lydd over |95% Bour ae Gk. of USF flying Oe schools S-COM | throughout sg CD MW eke WNapOOlEYS theUK
Together To Protect \ Your Investment
ee Three monthsthat cando moreharmto aircraft
engines than an entireseason offly ng LAS REALLY DO! at
Contact LAS Aerospace, your number 1 parts supplier. LAS Aerospace Ltd, Exeter Road Industrial Estate, Okehampton, Devon, UK EX20 1UA Email: sales@lasaero.com Phone: 01837 658081 « Fax: 01837 658080
www.lasaero.com