Issuu

PRODUCING TRUST IN FIRE AND SAFETY

FIRE HOSE & ACCESSORIES A PRODUCT OF

KITE MARK APPROVED

www.sffecoglobal.com

SFFECO with its more than 30 years of experience has always been a progressive organization that has remained in the forefront of the fire fighting industry with innovative, re-engineered and unique products. SFFECO in its state-of-the-art manufacturing plants in RIYADH & DUBAI works in close connections with renowned governmental and certification bodies to provide key answers to the challanges faced by the society.

SFG-HSCAT | Date 25/02/2021 | Rev. No.: 1.0

SFFECO brings together over 3-Decades of expertise and experience in form of Design, Consultancy, Testing, Commissioning, Maintenance & Refurbishment of fire protection and fire fighting systems.

FIRE HOSES AND ACCESSORIES

Sffeco Global is a leading manufacturer of firefighting equipment whereas fire hoses, racks & accessories are one of the main category we manufacture under one roof. Our specific range of products and accessories are fully certified by the Kitemark and UL. Sffeco Global provides the solution of fire hoses which enables your firefighting team to stop fires quickly in any incident. Hose Reel discs are made of 1.2mm pre-treated electro-galvanized steel sheet, painted with electrostatic powder coating and oven baked at 200 C. Hose reel side plates are protected with a polyester powder coating that complies to salt spray test requirement which is specified in ISO 9227 for 240 hrs. Hose Reel drum has formation of hydraulically pressed ribs to give extra strength and to avoid twisting. The outer edges are rolled over to give a safe handling edge on the outer rims and better appearance. H o se

Page

Botto

7 2 8 3 d R ee ls EX 2 an V TE T. R ac ks et s,

Cab in

H o se

Cab in

s and Rack ets,

KITE MARK APPROVED

R ac ks

an d

R ee ls

283

EX27

Reels

AD-HR Cabin or SF Hose 15H on for A-15 FZCO ormati D-HR EN T R, . L, SF ral Inf UI P M (VTS racks 2515 valve RE EQ HRA- H hose rvice R FI 15 SFDucing r ed se Y FO 15L, D-HR-25 ry Fo re red um rat A-15 CT OR i Facto pressua maxim I FA D-HR L and SF ud or SF Sa UD lve 15 . or for SA dels se va UFZ) vely, l 076 h Mo SFD-HR-25 833 ied ho respecti ZONE Mode nozzle (V e wit , rtif H, TSR, us S-10 EE ES cts Ce (V 15 e, se for AT du ALI FR ce valve in. siz rately H1 HR-15 150, EMIR n Pro ray ho JEBEL SFDHRCucing rated servi For SOUT a sepa of 1-1/2 Protectio rtable sp ARAB L, DD red of ITY 15 SF ry e re po ms OR ing um del UNITE HR-15 syste nsist i Facto 03, Fir ter and a AUTH pressua maxim et, Mo 1281 SFDL, co ndpipes es MTL5 Saud . lve or I, 26 for Cabin Models adap 1515 6 or Z) ed sta se va d vely, Rack DUBA HRAdel 07 zzle (VUF erior ed (Merc rack nipple ied ho respecti Hose mblies an , Mo l SFD- with int atic Certif e, se no in. lin pipes, ducts e Mode r rvice k asse autom rately /2 in. siz tion Pro spray ho 1-1/2 for us ed se ctory Fo mbly, stand Semi hose rac 2-1 tec a sepa asse se racks 100 ft of ble um rat udi Fa se for H rack ing of stems of , Fire Pro d a porta ho of 2515 fire ho maxim or Sa hose -1515L sy nsist ximum J40HR) for a del 076 atic L, co ndpipes es MTL503 apter an HR size, ad 2515 h a ma D-FH-S autom l SFD, Mo ed sta in. Aple wit cts or erc de ce /2 HR Semi du Dk nip For interi del SF servi ), Mo ed (M 0 psig, of 1-1 n Pro del SF with /2 in. lin pipes, rac VUTX re of 15 FZCO, Mo rated i Factory stems Protectio um ly, Mo for use sy nd ud 1-1 ssu nt e es mb xim sta Sa me pre pip , Fir asse se racks 100 ft of a ma l 076 or se for Equip stand MTL503 rack ho of e, for de Fire fire ho erior es hose -2515L TSR, in. siz cts, Mo h int (Merced ximum J40HR) atic HR lve (V ce e wit -S 2-1/2 n Produ a ma autom l SFDwith l SFD-FH ing va ed servi r for us in. lined pipes. tio ms of de Semi /2 15L, reduc Fo de syste e Protec ), Mo rat nd 0 psig, HR-15 ft of 1-1 for sta ssure ximum i Factory VUTX re of 15 FZCO, Mo pipes , Fir or pre l SFD- of 100 stand MTL503 hose a ma Saud pressu uipment Mode erior es valve um ) fire ly, for l 076 or (VUFZ). Eq h int rack, erced hose ctive maxim -SJ40HR de Fire use wit lined (M . FH rtified e, respe cts, Mo se nozzle c hose with a TSR, Dfor Ce ati es in. SF du L, ig, siz lve (V ce ho pip /2 15 Pro del in. rately autom 0 ps ing va ed servi r spray tion of 1-1 for stand sepa of 1-1/2 HR-25 Semi re of 15 FZCO, Mo reduc Fo of a se rat SFD- of 100 ft Protec portable l re ssu nt e ho ms ing de um ctory me pre fire Mo da nsist es syste L503, Fir pressua maxim HR) Equip udi Fa ximum rack, ter an H, co pip lve or Fire for . or Sa es MT adap hose with a ma D-FH-SJ40 1515 or stand se va vely, del 076 e (VUFZ) atic erced k nipple HRAeri ied ho respecti Mo del SF zzl ed (M autom 0 psig, rac l SFD- with int Certif cts, e, ce se no Semi re of 15 FZCO, Mo in. lin pipes, e Mode servi For rately /2 in. siz tion Produ spray ho nd for us 1-1/2 mbly, rated Factory pressu uipment 2-1 a sepa for sta tec asse se racks 100 ft of ble Eq hose rack ximumor Saudi ho ing of stems of , Fire Pro d a porta of Fire H se ist ma fire a sy um ns ho ) 15 6 03 an for atic l 07 H, co pipes es MTL5 adapter HR-15 a maxim -SJ40HR size, Mode 2515 or stand autom l SFDwith l SFD-FH cts, erced k nipple /2 in. de HRASemi eri rvice r de ), Mo ed (M of 1-1 tion Produ 5 psig, rac l SFD- with int ry Fo ed se VUTX re of 17 FZCO, Mo in. lin pipes, e Mode tec stems um rat udi Facto nd for us of 1-1/2 es sy , Fire Pro xim mbly, sta Sa ks se pressu uipment pip ma or ft for as rac Eq stand MTL503 for a del 076 100 hose rack hose Fire erior size, hose -2515H ximum of HR) fire , Mo h int (Mercedes atic /2 in. HR ducts e wit a ma FH-SJ40 autom l SFDof 2-1 n Pro lined . with for us Dde Semi stems Protectio pipes 15H, 1-1/2 in. sy ), Mo 175 psig, , Model SF nd -15 e es TX sta HR VU pip , Fir ft of re of FZCO se for stand MTL503 l SFD- of 100 pressu uipment fire ho erior Mode HR) Eq h int (Mercedes ximum rack, Fire e wit hose with a ma D-FH-SJ40 for us in. lined Top atic es. LLC /2 15H, Page del SF autom ndpip 5 psig, 17 UL HR-25 ft of 1-1 for sta Semi re of 17 FZCO, Mo © 20 l SFD- of 100 hose pressu uipment ed Mode um ) fire Eq factur rack, maxim -SJ40HR Fire Use manu llow-Up FH c hose with a s of Dati Fo been rm SF Te del have der UL's autom 5 psig, fied Semi re of 17 FZCO, Mo un identi vered ssu nt so me pre d co cts Equip produ Guide ied an -08-07 page Fire The that be Certif 2017 this : 1. nsure Print ted on a no itions elf as red to tory Upda cond ty and in Direc e in t in its conside Last tic lowing tire tions es no ld be the folin their en e Certifica pyright no ase do rk shou ct to ? d Ma lin a co s datab tions subje presente the On include in thi ng the UL tory Ques st duct from ari Direc must be or pro ducts be tion ) rinted terial mu es ep ica me ma (fil rtif na pro t "R ct. rinted any's ly those line Ce ications temen produ a comp ce. On the On r Certif 2. The staion, the rep the in of e d d/o ). dit Servi Mark on aranc ntaine stems, an wings . In ad appe Follow-Up for the ial co Sy (or dra material The k mater signs, d data r UL's s loo of the ons, De n of the unde . Alway tracte tion cti ce tio the ex roduc Constru Servi nipula ent to the repmblies, y ma adjac ut an rmits se pear UL pe ation, As er, witho must ap C". LL nn " Inform ing ma from UL 17 UL 20 ad misle rmission mat: "© pe with lowing for the fol

See

Gene

SFG-HSCAT | Date 25/02/2021 | Rev. No.: 1.0

Automatic fire hose reels are available with an internal valve built into the hose reel unit which opens within 3 revolutions of the hose reel as the hose is pulled out and closes when the hose is wound back to the reel.

et s,

EN RUBBER HOSE SEMI RIGID TYPE SFFECO Semi Rigid Fire Fighting Hose is designed and manufactured in compliance with BS EN-694:2014 standard. The hose is double layered with red cover and black lining. SFFECO Fire Fighting hose is suitable to use with fixed fire fighting systems like fire hose reels. It’s flexibility helps to roll or handle the hose easily. Material used for inner lining and cover of hose is plasticized PVC compound and high tensile textile polyester yarn is used for reinforcement of hose.

SH25R

SH19R

Red

30 Meter

25 mm

19 mm

Type A, Class 2

Maximum Working Pressure

12 Bar

Proof Pressure

24 Bar

Minimum Burst Pressure

42 Bar

Model Hose Color Hose Length Hose Size Hose Classiﬁca�on

Temperature Range

-20°C to +60°C at ambient temperature condi�on in nonaggressive or non-corrosive atmosphere

*NOTE : Black hoses are also available upon request.

KITEMARK APPROVED COMPLIENCE TO BS EN-694:2014 STANDARD

SFG-HSCAT | Date 25/02/2021 | Rev. No.: 1.0

(For Non Listed Products Only)

MANUAL & AUTOMATIC TYPE HOSE REEL SF30 SERIES

SFFECO manufactures Fire Hose reel considered State of the art with highly efficient fire fighting facility maintaining the consistancy in supply of water upon immediate requirement. The Hoses are made and being constructed with semi-rigid making sure the satisfactory installation on site. The Fire Hose Reels are designed and manufactured as per BS-EN671 - 1. The discs of Sffeco Hose Rell are made of 1.2mm painted with electrostatic powder coating and oven baked at 200˚c.

MAIN FEATURES

Rubber Hose Enclousre * SFFECO Hose Reels are available in combination with Fire Cabinets as an accessory :

• Single Door Cabinet • Horizontal Double Door Cabinet • Vertical Double Door Cabinet

SFG-HSCAT | Date 25/02/2021 | Rev. No.: 1.0

• BSI Kitemark. • The fire hose reels are capable of rotating in one plane (fixed type)or rotating in more than one plane with mounting on one of the following: swinging arm, swinging pipe or swinging door in manual and automatic version. • The automatic fire hose reels will open fully within 3 revolution of the reel. • The nozzle is available in RED plastic or metal chrome plated • The minimum flow rate of hose reels in JET and SPRAY setting is 41 L/MIN. at 0.6 MPa (6 bar) pressure. • The effective throw range of discharge at 0.2 MPa (2 bar) pressure is 10 mtrs. in JET setting. • The reel discs and drum are painted RED SS304 or SS316 with printed instructions to use label. • Hose reel diameter: 580mm • Hose length: 30 m

MANUAL & AUTOMATIC TYPE SPECIFICATIONS

FIXED TYPE

Manual & Automatic

SWINGING PIPE TYPE

SWINGING ARM TYPE

Swinging Pipe Manual & Automatic Fire Hose Reels are designed for mounting on flat wall where access is limited in a recessed cabinet or any riser shaft. Maximum swinging angle if wall mounted is 180°

Swinging Arm Manual & Automatic Fire Hose Reels are specially designed for mounting on flat walls, where access is limited in a recessed cabinet or any riser shaft. Maximum swinging angle if wall mounted is 180°

Manual & Automatic

Fixed Type hose reels Manual & Automatic are specially designed for easy mounting on a flat wall and easy accessiblity.

Manual & Automatic

MANUAL

AUTO

MANUAL

AUTO

MANUAL

AUTO

SF30 F-19

SF30A-F-19

SF30 SP-19

SF30A-SP-19

SF30 SA-19 SF30A-SA-19

SF30 F-25

SF30A-F-25

SF30 SP-25

SF30A-SP-25

SF30 SA-25 SF30A-SA-25

ACCESSORIES

Rigid Plastic

Metal Chrome Plated

(Equivalent Diameter 6mm) Shut- Spray - Jet: Spray discharge pattern in conical form with a spray angle more than 45o. SIZE : ¾” or 1"

VALVE & NIPPLE

Lever Type Handle

Wing Type Handle

Valves Shall be of ¾” or 1" ball valve and nipple of ¾” or 1". Body made of Brass. Ball valve are available with Lever type handle or wing type handle (Factory Choice)

SFG-HSCAT | Date 25/02/2021 | Rev. No.: 1.0

NOZZLE

SYNTHETIC HOSES SINGLE & DOUBLE JACKET

EX16299

SFFECO UL LISTED Single and Double Jacket Fire Hoses are lined with a high-tech EPDM tube whose engineered design guarantees minimum weight with maximum durability and flexibility.The polyester construction is mildew & rot-proof, tough,dependable,lightweight and with outstanding abrasion resistance with our innovative Wisentec coating. The jacket is evenly and firmly woven and free from visible defects, thread knots, lumps and irregularities of twist. The most common use of these fire hoses are for exterior fire protection and are also used by Fire Brigades.

AVAILABLE IN RED & WHITE COLORS

• • • • • •

Heavy duty construction for optimum abrasion resistance. Weather, ozone and ageing resistant with long service life. Easy to repair, clean and maintenance. The breaking strength of the jacket threads meets the requirements of UL19. The tensile strength hand ultimate elongation of inner lining meet the requirements of UL19. Hose is designed to withstand 1.5 times the service pressure without rupturing or breaking any thread in the jacket as per UL19. • Hose comes with attached couplings, our standard will be aluminum anodized, other materials like brass or chrome finish will be as per request. • Couplings are available in NST or Instantaneous BS336 as per request.

SFG-HSCAT | Date 25/02/2021 | Rev. No.: 1.0

FEATURES:

SYNTHETIC HOSES SPECIFICATIONS

EX16343

UL LISTED PRODUCTS

( AVAILABLE IN RED COLORS AS STANDARD WHEREAS OTHER COLORS ARE ALSO AVAILABLE UPON CUSTOMER REQUEST)

TYPE

MODEL

HOSE SIZE

HOSE LENGTH

WORKING /SERVICE PRESSURE

BURST PRESSURE

SFSJ40R-UL

Single Jacket

1 ½”

15m, 30m

200 psi

600 psi

SFSJ65R-UL

Single Jacket

2 ½”

15m, 30m

200 psi

600 psi

SFDJ40R-UL

Double Jacket

1 ½”

15m, 30m

300 psi

900 psi

SFDJ65R-UL

Double Jacket

2 ½”

15m, 30m

300 psi

900 psi

SFD-FH-SJ40HR *

Single Jacket

1 ½”

15m, 30m,100m

250 psi

750 psi

* UL / FM Range

STANDARD PRODUCTS TYPE

MODEL

CAPACITY

WORKING PRESSURE

BURST PRESSURE

SYNTEX 60

Single Jacket

40, 50, 65 mm

16 Bars

50 Bars

D. SYNTEX W

Double Jacket

40, 65 mm

28 Bars

82 Bars

Hose Mounting

CRADDLE

BRACKET

REELS

AVAILABLE IN

SFG-HSCAT | Date 25/02/2021 | Rev. No.: 1.0

2 ½” & 1 ½”

HOSE RACK

EX27283

SFFECO UL Listed Fire Hose Rack model is manufactured with standard Thickness of 1.5 mm SFFECO HOSE RACK ASSEMBLY is available with 1 1/2" inlet with Maximum Service Pressure 175 PSIG Standard and 150 PSIG Optional Semi automatic Hose Rack has been designed to use with stand pipe systems of 1 1/2'' & 2 1/2” with 1 1/2'' lined fire hose of 100ft max, The Racks are made of mild steel which is powder coated red textured, RAL 3000, Nozzle holding brk: Powder Coated Black RAL9005 also other Internal parts are made with stainless steel as standard.

TECHNICAL DETAILS Model No Hose Rack

SFD-HRA-2515H

SFD-HRA-2515L

Semiautomatic Hose Rack for use with stand pipe systems of 2½” with 1½” lined fire hose of 100ft max.

SFD-HRA-1515L

Semiautomatic Hose Rack for use with stand pipe systems of 1½” with 1½” lined fire hose of 100ft max.

Standard Thickness: 1.5 mm

Hose Rack Material Thickness

Max Service Pressure

SFD-HRA-1515H

175 psi

150 psi

175 psi

150 psi

SFFECO Hose (Standard) SFD-FH-SJ40HR

Single jacketed fire hose with TPU lining, hot melting adhesive and polyester jackets White Colored SFFECO ( SFD-FH-SJ40HR )

Mercedes Textile Ltd. Hose (Optional) Polyflex 503 MTL

Single jacket. Lightweight. Synthetic warp and filler. Polyurethane-lined. White Colored Mercedes Textile Ltd.( Polyflex 503 MTL )

Fire Protection Products Inc. Hose (Optional Only for use with UL hose racks) 07 - 60

Polyurethane-lined hose with polyester warp threads and filler threads White Colored. Fire Protection Products Inc ( 07 - 60 )

SFFECO Nozzle

Brass Portable Spray type Fire Hose Nozzle SFFECO ( SFD-NH-83-40 )

Angle Hose Valve

2½” NPT thread Female inlet with 2½” NPT Female thread outlet SFFECO ( SF-AV25 ) Lifeco ( AH25 )

Brass Nipple for Hose Rack 1½” NPT X 1½” NST SFFECO ( SF-AV15 ) Lifeco ( AH15 )

Nipple

Brass Nipple for Hose Rack 2½” NPT X 1½” NST

Brass Nipple for Hose Rack 1½” NPT X 1½” NST

UL LISTED & FM APPROVED Pressure Reducing & Restricting Devices (Optional)

2½” NPT thread Female inlet with 2½” NPT Female thread outlet

1½” NPT thread Female inlet with 1½” NPT Female thread outlet

OTHER OPTIONS Rack Body Finish Rack Body Material Internal Parts Plain Red GI Coated Stainless steel Chrome Chrome Plated

Available Types

Model

Material

Dimensions

Surface, Recessed & Semi Recessed

SFD-HRC-150

Mild Steel / Stainless Steel 300 series

750 x 950 x 230 mm

SFG-HSCAT | Date 25/02/2021 | Rev. No.: 1.0

HOSE RACK CABINET

HOSE RACK ACCESSORIES

EX16343

ANGLE VALVES SFFECO Fire Hose Angle Valves (90 degrees pattern) are for use on standpipe having inlet and outlet opening of the same size or with the inlet larger than outlet. The valve is made in accordance with UL 668 Hose Valve for Fire Protection Service standards. Rated Pressure : 300psig SIZES: 1 ½” x 1 ½” & 2 ½” x 2 ½” Test Pressure : 600psis CONNECTION NPT Female taper thread lnletwith NPT female taper thread outlet NPT Female taper thread Inlet with NST(NH) male thread outlet MODELS

MATERIAL : Cast Brass

PRESSURE RESTRICTING VALVE ( PRV ) The Pressure Restricting angle type Hose Valve is fabricated in accordance with the UL 1468 Direct Acting Pressure Reducing and Pressure Restricting Valves and FM 1362 Pressure Reducing Valve, an adjustable restriction of pressure up to its rated 175 lbs. SIZES: 1 ½” x 1 ½” & 2 ½” x 2 ½” CONNECTION NPT Female taper thread lnlet with NPT female taper thread outlet NPT Female taper thread Inlet with NST(NH) male thread outlet

Rated Pressure : 175psig Test Pressure : 350 psig

MODELS SF-PRV15 SF-PRV20 SF-PRV25 SF-PRV30 * *

* UL / FM Range

MATERIAL : Cast Brass

Optional - Brass

SFG-HSCAT | Date 25/02/2021 | Rev. No.: 1.0

OPTIONAL INSTANTANEOUS ADAPTOR

SYNTHTIC HOSE ACCESSORIES

EX16300

PRODUCT DESCRIPTION: Adjustable nozzle are used for Class A and B fires in most industrial applications. They are used with lined fire hose. Adjustable fog, straight stream and shut off PRODUCT FEATURES: UL Listed Available sizes: 1 ½” & 2 ½” Adjustable fog, straight stream and shut off Finish : Brass and Chrome Thread: NST/BS336 NST to BS336 male adaptor available if required. Nozzle pressure: 100 psi Discharge GPM as in Ullisting

Model No.

Fire Type

Size, in.

Max Inlet Pressure PSIG

Rated Operating Pressure, PSIG

Rated Flow at Rated Operating Pressure, PSIG

Flow in Wide Open Position at 100 PSIG, GPM

Basic Spray Nozzles SFD-NH-83-40 *

Class A and B

1-1/2

200

100

104

SFD-NH-65

Class A and B

2-1/2*

200

100

280

SFD-NH-40

Class A and B

1-1/2**

200

100

130

* Includes both NH (NST) and NPSH (IPT) inlet thread configurations. Also includes BS336 "Morris" instantaneous coupling Inlet configuration. ** Includes both NH (NST) and NPSH (IPT) inlet thread configurations. PRECAUTIONS: Use of solid stream from nozzle around electrical apparatus and circuits may involve serious accident hazards and these nozzles, therefore, are not recommended for Class C fires.

SFG-HSCAT | Date 25/02/2021 | Rev. No.: 1.0

* UL / FM Range