Carroll & QuikCrimp Catalogue by Seton Australia

CarrOll aUstralasia

Carroll has been supplying premium electrical accessories and pre-printed wire identification solutions to a diverse range of industries for more than 40 years.

Offering a complete program for terminating, connecting, bundling, protecting and identifying electrical circuits.

in accordance with the ISO 9001 quality standard.

Carroll customers come from a diverse cross section of industry.

Our products are reliably performing every day in many stringent and hazardous environments – power stations rail and mass transit, aerospace, airports, mining, agriculture, trucks, buses, cars, food, smelters, refi neries and petrochemical plants.

brady is the undisputed expert in safety and identiﬁ cation solutions, helping businesses to be safe, secure and productive.

whO we are ELECTRICAL COMPONENTS & WIRE ACCESSORIES GUIDE

Supplied

3quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au QUiKCrimp aUstralia Quikcrimp has been supplying electrical components and wiring accessory products to the automotive and marine industries for over 35 years. Offering a complete program for terminating, connecting, bundling, protecting and identifying electrical circuits. Supplied in accordance with the ISO 9001 quality standard. Auto electricians, engineers and trades people from major manufacturers choose Quikcrimp as their connection reliability. Our products perform reliably every day in many crucial environments – trucks, buses, cars, and machinery as well as premium marine equipment. We work closely with world class suppliers as well as producing our own unique in-house solutions to provide a complete end-toend experience for our customers and their changing needs. Through the support of our parent company Brady, we leverage a global network of industries to bring our customers a range of products and solutions essential to their safety and productivity.

COmplianCe

RoHS Compliance

RoHS (Restriction of use of certain Hazardous Substances) is an EU Directive that will restrict the use of 6 hazardous materials in the manufacture of electronic & electrical equipment.

RoHS is having a fundamental impact on the electronics industry.

Legally it applies within the EU only, however RoHS is fast becoming a world-wide ‘standard’ due to the global nature of this industry. Similar environmental legislation is also being considered in a number of countries outside the EU.

RoHS is not solely a technical manufacturing problem. It has major implications for other aspects of business including: product design, customer and supplier relations, logistics and supply chain management.

Carroll and Quikcrimp fully support all environmental objectives of this directive and are working closely with our business partners to ensure compliance and support for your business.

For more information on what Carroll and Quikcrimp products comply to the RoHS regulation, contact customer service on 1800 777 458.

ReACH Compliance

As of 1st June 2007, the European regulation 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) came into force.

REACH has several aims, including the provision of a high level of protection for human health and the environment from the use of chemicals. There are many chemicals in use which have potentially unknown associated risks because they have never been fully evaluated.

REACH aims to make the people who place chemicals on the market (manufacturers and importers) responsible for understanding and managing the risks associated with their use.

Carroll are currently working with suppliers to establish what action they intend to take in respect of the products they supply.

For more information on what Carroll and Quikcrimp products comply to the REACH regulation, contact customer service on 1800 777 458.

ELECTRICAL COMPONENTS & WIRE ACCESSORIES GUIDE

5quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au table Of COntents tOOls Hand Crimping, Hydraulics, Battery Powered, Cable Cutters, Harnessflex, Weather Packs, Cable Ties and Boxes 96 Kits Pre-Insulated Terminal Kits, Copper Lug Kits, Connector Kits, Fuse Kits 102 Cable management Nylon/Steel Cable Ties, Cable Clamps, Girder Clips, Spiroll Wrapping, Quikflex, Loom Tube and Slotted Wiring Duct 66 identifiCatiOn Markfast Laser Trees, Kmark, Heatex, Steelmark Laser Tags & Laser Etching 106 terminals Pre-Insulated & Uninsulated Terminals, Boot Lace Ferrules, Copper Lugs & Links, Battery Terminals and Accessories 6 COnneCtOrs Relay Connectors, Screw Connectors and Terminal Strips 80 brady printers M210 Label Printer, Label Printer, BMP61 Portable Label Printer, BMP71 Portable Label Printer, Software 116 prOteCtOrs Heat Shrink, Bushings, Cable Glands, Harnessflex Conduit & Fittings, Fuses, Circuit Breakers and Diodes 40 mY-DaTa-123

terminals COpper Crimp linKs 28 HeAT SHRINKABle PRe-INSulATed TeRMINAlS 20 battery terminals and prOteCtOrs Crimp battery lUgs & linKs 31 32 PRe-INSulATed TeRMINAlS terminals range line Card 13 7 CirCUit breaKer/narrOw palm lUgs 29 end sleeVe bOOt laCe ferrUles 22 marine and military battery terminals 34 battery terminal aCCessOries 37 UninsUlated terminals 18 lONG PAlM - lONG BARRel luGS 30 COpper Cable lUgs 24 battery and lUg prOteCtOrs 36 Crimp starter lUgs and linKs 38 Cable sizing referenCe gUide 39

PRe-INSulATed terminals width / type WIre pIN FlAt blADe FlAt blADe lIp blADe lIp blADe 2.8 x .5 tAb 2.8 x .8 tAb copper grip WPC1 FBC1-2.3 FBC1-2.3L LBC1-3 LBC1-5 QCF1-3/5 QCF1-3/8 vinyl grip WPV1 vinyl grip (QK) QKC10 QKC52 QKC19 COndUCtOr 0.5–1.65mm2 sCrew size 3 mm 3.5 mm 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm copper grip RC2-3 RC2-3.5 RC2-4B RC2-5 RC2-6 RC2-8 RC2-10 RC2-12 vinyl grip RV2-3 RV2-3.5 RV2-4 RV2-5 RV2-6 RV2-8 RV2-10 RV2-12 uninsulated R2-3 R2-4 R2-5 R2-6 R2-8 vinyl grip (QK) QKC20 QKC21 QKC22 QKC23 QKC24 QKC25 QKC26 COndUCtOr 1.04–2.63mm2 width / type WIre pIN FlAt blADe FlAt blADe lIp blADe lIp blADe 2.8 x .5 tAb 2.8 x .8 tAb copper grip WPC2 FBC2-2.3 FBC2-2.3L LBC2-3 LBC2-5 QCF2-3/5 QCF2-3/8 vinyl grip WPV2 vinyl grip (QK) QKC30 QKC71 QKC69 QKC70 COndUCtOr 1.04–2.63mm2 sCrew size 3 mm 3.5 mm 4 mm 5 mm 6 mm 8 mm 10 mm copper grip RC1-3 RC1-3.5 RC1-4B RC1-5 RC1-6 RC1-8 RC1-10 vinyl grip RV1-3.5 RV1-4 RV1-5 RV1-6 RV1-8 RV1-10 uninsulated R1-3.5 R1-4 R1-5 R1-6 vinyl grip (QK) QKC01 QKC02 QKC03 QKC04 QKC05 QKC06 COndUCtOr 0.5–1.65mm2 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 7

sCrew size 4.8 mm 4.8 mm 6.4 mm 8.0 mm 4.8 x .5/.8 tAb 6.4 mm 6.4 mm 6.4 mm 6.4 mm copper grip QCF2-5/5 (.5tab) QCF2-5/8 (.8tab) QCF2-6 QCF2-8 QCF2-5F/5 QCF2-6F QCF2-6F90 QCM2-6F MALE TAB QCM2-6 MALE TAB vinyl grip QCF2-5F/8 vinyl grip (QK) QKC62 QKC72 QKC32 QKC58 QKC67/ QKC76 QKC35 QKC78 QKC65 COndUCtOr 1.04–2.63mm2 TERMINALS PRe-INSulATed terminals width / type 4.8 mm 4.8 mm 6.4 mm 4.8 x .5 tAb 6.4 mm 6.4 mm 6.4 mm 6.4 mm 6.4 mm bullet 4 mm recept .4 mm copper grip QCF1-5/5 (.5tab) QCF1-5/8 (.8tab) QCF1-6 QCF1-5F QCF1-6F QCF1 -6F90 QCM16F MALE TAB QCM1-6 MALE TAB QCF1 -6P BCM1-4 BCF1-4 vinyl grip (QK) QKC13 QKC44 QKC12 QKC66 QKC73 QKC77 QKC16 QKC15 QKC17 QKC18 COndUCtOr 0.5–1.65 mm 2 sCrew size 3.5 mm NArrOW 3.5 mm 4 mm 5 mm bUtt spliCe nylOn bUtt parallel spliCe end spliCe copper grip SC1-3 SC1-3.5 SC1-4 SC1-5 BSC1 NBSC1 PSV1 ES1 vinyl grip SV1-3 SV1-3.5 SV1-4 SV1-5 BSV1 uninsulated S1-3 S1-3.5 S1-4 S1-5 vinyl grip (QK) QKC07 QKC08 QKC11 COndUCtOr 0.5–1.65mm2 sCrew size 3.5 mm 3.5 mm 4 mm 5 mm bUtt spliCe nylOn bUtt parallel spliCe end spliCe copper grip SC2-3 SC2-3.5 SC2-4 SC2-5 BSC2 NBSC2 PSV2 ES2 vinyl grip SV2-3 SV2-3.5 SV2-4 SV2-5 BSV2 uninsulated S2-3.5 S2-4 S2-5 vinyl grip (QK) QKC27 QKC28 QKC29 QKC31 COndUCtOr 1.04–2.63mm2

width / type wire pin flat blade flat blade lip blade 6.4 mm 9.5 mm 6.4 mm 6.4 mm copper grip WPC5 FBC5-3 FBC5-5 LBC5-5 QCF5-6 QCF5-9 QCF5-6F QCM5-6 vinyl grip WPV5 vinyl grip (QK) QKC48 QKC50 QKC51 QKC75 QKC87 CO nd UC t O r 2.63–6.64 mm 2 s Crew size 3.5 mm 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 3.5 mm copper grip RC5-3.5 RC5-4 RC5-5 RC5-6 RC5-8 RC5-10 RC5-12 SC5-3.5 vinyl grip RV5-3.5 RV5-4 RV5-5 RV5-6 RV5-8 RV5-10 RV5-12 SV5-3.5 uninsulated R5-4 R5-5 R5-6 R5-8 R5-10 vinyl grip (QK) QKC38 QKC39 QKC40 QKC41 QKC42 QKC43 CO nd UC t O r 2.63–6.64mm2 width / type 6.4 mm bullet 5 mm recept 5 mm copper grip QCF2-6P BCM2-5 BCF2-5 vinyl grip (QK) QKC34 QKC36 QKC37 CO nd UC t O r 1.04–2.63mm2 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 9

TERMINALS heat shrinKable sCrew size 3.5 mm 4 mm 5 mm 6 mm 3.5 mm 4 mm 5 mm 6.4 mm copper grip RW1-3.5 RW1-4 RW1-5 RW1-6 SW1-3.5 SW1-4 SW1-5 QWF1-6F COndUCtOr 0.5–1.65mm2 sCrew size 3.5 mm 4 mm 5 mm 6 mm 8 mm 10 mm 3.5 mm 4 mm copper grip RW2-3.5 RW2-4 RW2-5 RW2-6 RW2-8 RW2-10 SW2-3.5 SW2-4 COndUCtOr 1.04–2.63mm2 sCrew size 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 5 mm copper grip RW5-4 RW5-5 RW5-6 RW5-8 RW5-10 RW5-12 SW5-5 COndUCtOr 2.63–6.64mm2 sCrew size 4 mm 5 mm 6 mm bUtt spliCe nylOn bUtt parallel spliCe end spliCe copper grip SC5-4 SC5-5 SC5-6 BSC5 NBSC5 PSV5 ES5 vinyl grip SV5-4 SV5-5 SV5-6 BSV5 uninsulated S5-5 S5-6 vinyl grip (QK) QKC45 QKC46 QKC47 QKC49 QKC61 COndUCtOr 2.63–6.64mm2

s Crew size b U llet re C ept copper grip BCM5-5 BCF5-5 copper grip (QK) QKC56 QKC57 CO nd UC t O r 2.63–6.64mm2 s Crew size 6.4 mm b U tt copper grip QWM1-6 BSW1 CO nd UC t O r 0.5–1.65mm2 s Crew size 5 mm 6.4 mm 6.4 mm 5 mm 5 mm b U tt copper grip SW2-5 QWF2-6F QWM2-6 BWM2-5 BWF2-5 BSW2 CO nd UC t O r 1.04–2.63mm2 s Crew size 6 mm 6.4 mm 6.4 mm b U tt copper grip SW5-6 QWF5-6F QWM5-6F BSW5 CO nd UC t O r 2.63–6.64mm2 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 11

Quikcrimp and Carroll terminals and splices have given many years of service providing testament to the quality and reliability of the design and manufacturing processes involved. Both Quikcrimp and Carroll terminals are colour-coded for different cable sizes allowing ease of identification and matching to the appropriate application tool. The wide range of Quikcrimp and Carroll terminals are readily available and ready to ship.

Configurations

Our range

1. Copper Grip

Designed for complete and uniform reliability in the most difficult circuit environments. Each Copper Grip terminal consists of a basic copper plated body, a specially designed copper sleeve fitted over the terminal barrel and a bonded colour-coded insulation sleeve.

2. Vinyl Grip

Vinyl Grip terminals and splices incorporate a hard, strong vinyl insulation sleeve. They provide complete reliability where the circuitry necessitates an insulated connection but operating conditions do not call for a permanent grip on the wire insulation.

3. uninsulated

Featuring short wire barrels, these terminals and splices are designed specifically for solid, stranded and irregularly shaped conductors. The termination is characterised by a “W” indent crimp, which locates the conductor in a central position making full surface area contact between the barrel and conductor.

4. Heat Shrinkable

These specialised crimp terminals incorporate a colour-coded, heat shrinkable, adhesive lined insulation. This provides a moisture-resistant seal to insulate and protect connections from environmental abuse, wire pullout, abrasion and contaminates.

terminals

offers 4 basic conﬁgurations for each type of terminal and splice:

simplified Ordering Product part numbers are generic and easy to follow. The available configurations are listed by terminal type and are colour-coded by wire size to eliminate errors in application. Q. Terminal Type R Ring FB Flat Blade S Spade NBS Nylon Butt Splice WP Wire Pin BC Bullet Connector LB Lip Blade ES End Splice PS Parallel Splice BS Butt Splice QC Quick Connect 6. Variation F Fully Insulated /5 .5mm Tab Thickness P Piggy Back /8 .8mm Tab Thickness /12 12mm Pin Length TERMINALS C. Configuration C Copper Grip (Double) V Vinyl Grip (Single) W Heat Shrinkable F. gender F Female M Male 1. Cable Size 1 Red 0.5–1.5mm2 or 22–16 AWG 2 Blue 1.5–2.5mm2 or 16–14 AWG 3 Yellow 2.5–6.0mm2 or 12–10 AWG F. Stud, Tab or Blade Width 3 3.2mm 4 4.2mm 6 6.4mm 10 10.5mm 3.5 3.7mm 5 5.3mm 8 8.5mm 12 13mm Insulating Sleeve + Copper Grip Sleeve + Body = Copper Grip Terminal COpper grip terminal + Body = Vinyl Grip Terminal Vinyl Plastic Sleeve Vinyl grip terminal = Body + Brazed Seam Uninsulated Terminal UninsUlated terminal + Body = Heat Shrinkable Terminal Heat Shrinkable Adhesive Lined Sleeve heat shrinKable terminal Q c F 1 – 6 F nOte: this part COnfigUratOr appliCable tO CarrOll part nUmbers

Pre-Insulated

RC2-3.5

RV2-3.5

RC2-4B

RV2-4 QKC21

RC2-5

RV2-5 QKC22

1.5–2.5

RC2-6 Copper 1.5–2.5

RV2-6 QKC23

1.5–2.5

RC2-8 Copper 1.5–2.5

RV2-8 QKC24

1.5–2.5

RC2-10 Copper 1.5–2.5

RV2-10 QKC25

1.5–2.5

RC2-12 Copper 1.5–2.5

RV2-12 QKC26 Vinyl 1.5–2.5

RC5-3.5 Copper 2.5–6.0

RV5-3.5 Vinyl 2.5–6.0

RC5-4 Copper 2.5–6.0

RV5-4 QKC38 Vinyl 2.5–6.0

RC5-5 Copper 2.5–6.0

RV5-5

RC5-6

RV5-6

RC5-8

RV5-8

RC5-10

RV5-10

13 100

3.7 100

4.2 100

PRe-INSulATed ring terminals

Ring Terminals CarrOll PART NO. QUiKCrimp PART NO. grip wire size mm² insUlatiOn COlOUr stUd size mm paCK Qty RC1-3 Copper 0.5–1.5 RED 3.2 100 RC1-3.5 Copper 0.5–1.5 RED 3.7 100 RV1-3.5 QKC01 Vinyl 0.5–1.5 RED 3.7 100 RC1-4B Copper 0.5–1.5 RED 4.2 100 RV1-4 QKC02 Vinyl 0.5–1.5 RED 4.2 100 RC1-5 Copper 0.5–1.5 RED 5.3 100 RV1-5 QKC03 Vinyl 0.5–1.5 RED 5.3 100 RC1-6 Copper 0.5–1.5 RED 6.4 100 RV1-6 QKC04 Vinyl 0.5–1.5 RED 6.4 100 RC1-8 Copper 0.5–1.5 RED 8.5 100 RV1-8 QKC05 Vinyl 0.5–1.5 RED 8.5 100 RC1-10 Copper 0.5–1.5 RED 10.5 100 RV1-10 QKC06 Vinyl 0.5–1.5 RED 10.5 100 RC2-3 Copper 1.5–2.5 BLUE 3.2 100 RV2-3 Vinyl

BLUE 3.2 100

Copper

BLUE 3.7 100

QKC20 Vinyl

BLUE 3.7 100

Copper

BLUE 4.2 100

Vinyl

BLUE 4.2 100

Copper

BLUE 5.3 100

Vinyl

BLUE 5.3 100

BLUE 6.4 100

Vinyl

BLUE 6.4 100

BLUE 8.5 100

Vinyl

BLUE 8.5 100

BLUE 10.5 100

Vinyl

BLUE 10.5 100

BLUE

YELLOW

YELLOW 5.3 100

QKC39 Vinyl 2.5–6.0 YELLOW 5.3 100

Copper 2.5–6.0 YELLOW 6.4 100

QKC40 Vinyl 2.5–6.0 YELLOW 6.4 100

Copper 2.5–6.0 YELLOW 8.3 100

QKC41 Vinyl 2.5–6.0 YELLOW 8.3 100

Copper 2.5–6.0 YELLOW 10.5 50

QKC42 Vinyl 2.5–6.0 YELLOW 10.5 50 RC5-12 Copper 2.5–6.0 YELLOW 13 50 RV5-12 QKC43 Vinyl 2.5–6.0 YELLOW 13 50 ideal Crimping tOOl: 0560 & 0560 Ultra see from page 97 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 13

SC1-3

SV1-3

SC1-3.5

SV1-3.5

SC1-4

SV1-5

SC2-3

SV2-3

SC2-3.5

SV2-3.5

SC2-4 Copper 1.5–2.5

SV2-4 QKC28

1.5–2.5

SC2-5 Copper 1.5–2.5

SV2-5 QKC29

SC5-3.5

SV5-3.5

SC5-4

SV5-4

SC5-5

SV5-5

SC5-6

SV5-6

1.5–2.5

Copper 2.5–6.0

2.5–6.0

Copper 2.5–6.0

2.5–6.0

4.2 100

5.3 100

3.7 100

4.2

5.3

6.4

TERMINALS PRe-INSulATed spade terminals PRe-INSulATed bUtt spliCes Pre-Insulated Spade Terminals ideal Crimping tOOl: 0526 & 0526 Ultra see from page 97 CarrOll PART NO. QUiKCrimp PART NO. grip wire size mm² insUlatiOn COlOUr stUd size mm paCK Qty

Copper 0.5–1.5 RED 3.2 100

Vinyl 0.5–1.5 RED 3.2 100

Copper 0.5–1.5 RED 3.7 100

QKC07 Vinyl 0.5–1.5 RED 3.7 100

Copper 0.5–1.5 RED 4.2 100 SV1-4 QKC08 Vinyl 0.5–1.5 RED 4.2 100 SC1-5 Copper 0.5–1.5 RED 5.3 100

QKC09 Vinyl 0.5–1.5 RED 5.3 100

Copper 1.5–2.5 BLUE 3.7 100

Vinyl 1.5–2.5 BLUE 3.7 100

Copper 1.5–2.5 BLUE 3.7 100

QKC27 Vinyl 1.5–2.5 BLUE 3.7 100

BLUE

Vinyl

BLUE

Vinyl

BLUE

YELLOW

Vinyl

YELLOW

100

QKC45 Vinyl

YELLOW

100

Copper

YELLOW

100

QKC46 Vinyl

YELLOW

100

Copper

YELLOW

100

QKC47 Vinyl

YELLOW

100 Pre-Insulated Vinyl Butt Splices PRe-INSulATed NYlON BuTT SPlICeS ideal Crimping tOOl: 0560 & 0560 Ultra see from page 97 CarrOll part NO. QUiKCrimp PART NO. grip wire size mm² insUlatiOn COlOUr paCK Qty BSV1 QKC11 Vinyl 0.5–1.5 RED 100 BSV2 QKC31 Vinyl 1.5–2.5 BLUE 100 BSV5 QKC49 Vinyl 2.5–6.0 YELLOW 100 PRe-INSulATed parallel spliCes Pre-Insulated Nylon Butt Splices (Copper grip) ideal Crimping tOOl: 0560 & 0560 Ultra see from page 97 PART NO. type wire size mm² insUlatiOn COlOUr paCK Qty BSC1 Copper Grip 0.5–1.5 RED 100 NBSC1 Aircraft Type 0.5–1.5 RED 100 BSC2 Copper Grip 1.5–2.5 BLUE 100 NBSC2 Aircraft Type 1.5–2.5 BLUE 100 BSC5 Copper Grip 2.5–6.0 YELLOW 50 NBSC5 Aircraft Type 2.5–6.0 YELLOW 50

Pre-Insulated Parallel Splices (See butt splice for standard wire joining) i deal C rimping t OO l: 0560 & 0560 U ltra see from page 97 PART NO. wire size mm² insUlatiOn COlOUr paCK Q ty PSV1 0.5–1.5 RED 100 PSV2 1.5–2.5 BLUE 100 PSV5 2.5–6.0 YELLOW 100 e nd s pli C es Pre-Insulated end Splices CarrOll part NO. QUiKCrimp PART NO. grip wire size mm² insUlatiOn COlOUr paCK Q ty ES1 QKC59 Copper 0.5–1.5 OPAQUE 100 ES2 QKC60 Copper 1.5–2.5 OPAQUE 100 ES5 QKC61 Copper 2.5–6.0 OPAQUE 100 Pre-Insulated Wire Pins P R e-I NS ul AT ed w ire p ins i deal C rimping t OO l: 0560 & 0560 U ltra see from page 97 CarrOll PART NO. grip wire size mm² insUlatiOn COlOUr pin length paCK Q ty WPC1 Copper 0.5–1.5 RED 9 100 WPV1 Vinyl 0.5–1.5 RED 9 100 WPC1/12 Copper 0.5–1.5 RED 12 100 WPV1/12 Vinyl 0.5–1.5 RED 12 100 WPC2 Copper 1.5–2.5 BLUE 9 100 WPV2 Vinyl 1.5–2.5 BLUE 9 100 WPC2/12 Copper 1.5–2.5 BLUE 12 100 WPV2/12 Vinyl 1.5–2.5 BLUE 12 100 WPC5 Copper 2.5–6.0 YELLOW 14 100 WPV5 Vinyl 2.5–6.0 YELLOW 14 100 QUiKCrimp PART NO. grip wire size mm² insUlatiOn COlOUr pin length paCK Q ty QKC10 Vinyl 0.5–1.5 RED 12 100 QKC30 Vinyl 1.5–2.5 BLUE 12 100 QKC48 Vinyl 2.5–6.0 YELLOW 9 100 Pre-Insulated Flat Blades P R e-I NS ul AT ed f lat b lades i deal C rimping t OO l: 0560 & 0560 U ltra see from page 97 CarrOll PART NO. QUiKCrimp PART NO. grip wire size mm² insUlatiOn COlOUr blade l x w mm paCK Q ty FBC1-2.3 QKC63 Copper 0.5–1.5 RED 11.4 x 2.3 100 FBC1-2.3L Copper 0.5–1.5 RED 18.4 x 2.3 100 FBC1-3 Copper 0.5–1.5 RED 11.0 x 3.0 100 FBC1-3L Copper 0.5–1.5 RED 14.5 x 3.0 100 FBC2-2.3 QKC71 Copper 1.5–2.5 BLUE 11.4 x 2.3 100 FBC2-2.3L Copper 1.5–2.5 BLUE 18.4 x 2.3 100 FBC5-3 Copper 2.5–6.0 YELLOW 10.0 x 2.8 100 FBC5-5 Copper 2.5–6.0 YELLOW 14.0 x 4.5 50 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 15

TERMINALS PRe-INSulATed QUiCK COnneCt female 90° fUlly insUlated QUiCK COnneCt female fUlly insUlated QUiCK COnneCt female Pre-Insulated lip Blades PRe-INSulATed lip blades ideal Crimping tOOl: 0560 & 0560 Ultra see from page 97 PART NO. grip wire size mm² insUlatiOn COlOUr blade l x w mm paCK Qty LBC1-3 Copper 0.5–1.5 RED 17.8 x 2.8 100 LBC1-5 Copper 0.5–1.5 RED 17.8 x 4.6 100 LBC2-3 Copper 1.5–2.5 BLUE 17.8 x 2.8 100 LBC2-5 Copper 1.5–2.5 BLUE 17.8 x 4.6 100 LBC5-3 Copper 2.5–6.0 YELLOW 16.8 x 3.0 50 LBC5-5 Copper 2.5–6.0 YELLOW 16.8 x 4.6 50 Pre-Insulated Quick Connect Female ideal Crimping tOOl: 0560 & 0560 Ultra see from page 97 CarrOll PART NO. QUiKCrimp PART NO. grip wire size mm² insUlatiOn COlOUr sUit tab paCK Qty QCF1-3/5 QKC52 Copper 0.5–1.5 RED 2.8 x 0.5 100 QCF1-3/8 QKC19 Copper 0.5–1.5 RED 2.8 x 0.8 100 QCF1-5/5 QKC13 Copper 0.5–1.5 RED 4.8 x 0.5 100 QCF1-5/8 QKC44 Copper 0.5–1.5 RED 4.8 x 0.8 100 QCF1-6 QKC12 Copper 0.5–1.5 RED 6.3 x 0.8 100 QCF2-3/5 QKC69 Copper 1.5–2.5 BLUE 2.8 x 0.5 100 QCF2-3/8 QKC70 Copper 1.5–2.5 BLUE 2.8 x 0.8 100 QCF2-5/5 QKC62 Copper 1.5–2.5 BLUE 4.8 x 0.5 100 QCF2-5/8 QKC72 Copper 1.5–2.5 BLUE 4.8 x 0.8 100 QCF2-6 QKC32 Copper 1.5–2.5 BLUE 6.3 x 0.8 100 QCF2-8 QKC58 Copper 1.5–2.5 BLUE 7.9 x 0.8 100 QCF5-6 QKC50 Copper 2.5–6.0 YELLOW 6.3 x 0.8 100 QCF5-9 QKC51 Copper 2.5–6.0 YELLOW 9.5 x 1.2 100 Fully Insulated Quick Connect Female *Nylon Insulation 105°C. ideal Crimping tOOl: 0560 & 0560 Ultra see from page 97 CarrOll PART NO. QUiKCrimp PART NO. grip wire size mm² insUlatiOn COlOUr insUlatiOn material sUit tab paCK Qty QCF1-5F QKC66 Copper 0.5–1.5 RED Vinyl 4.8 x 0.5 100 QCF1-5F/8 Copper 0.5–1.5 RED Vinyl 4.8 x 0.8 100 QCF1-6F QKC16 Copper 0.5–1.5 RED Nylon 6.3 x 0.8 100 QCF2-5F/5 QKC67 Copper 1.5–2.5 BLUE Vinyl 4.8 x 0.5 100 QCF2-5F/8 QKC76 Copper 1.5–2.5 BLUE Vinyl 4.8 x 0.8 100 QCF2-6F QKC35 Copper 1.5–2.5 BLUE Nylon 6.3 x 0.8 100 QCF5-6F QKC55 Copper 2.5–6.0 YELLOW Nylon 6.3 x 0.8 100 90° Fully Insulated Quick Connect Female ideal Crimping tOOl: 0525 see from page 97 CarrOll PART NO. QUiKCrimp PART NO. grip wire size mm² insUlatiOn COlOUr insUlatiOn material sUit tab paCK Qty QCF1-6F90 QKC77 Copper 0.5–1.5 RED Nylon 6.3 x 0.8 100 QCF2-6F90 QKC78 Copper 1.5–2.5 BLUE Nylon 6.3 x 0.8 100

Fully Insulated Quick Connect Male PR e-I NS ul AT ed b U llet male PR e-I NS ul AT ed b U llet female QU i CK CO nne C t piggy ba CK ins U lated QU i CK CO nne C t - MA le PR e -INS ul AT ed QU i CK CO nne C t - MA le i deal C rimping t OO l: 0525 see from page 97 CarrOll PART NO. QUiKCrimp PART NO. grip wire size mm² insUlatiOn COlOUr insUlatiOn material sUit f paCK Q ty QCM1-6F QKC64 Copper 0.5–1.5 RED Nylon QCF1-6F 100 QCM2-6F QKC65 Copper 1.5–2.5 BLUE Nylon QCF2-6F 100 Pre-Insulated Quick Connect Male i deal C rimping t OO l: 0560 & 0560 U ltra see from page 97 CarrOll PART NO. QUiKCrimp PART NO. grip wire size mm² insUlatiOn COlOUr insUlatiOn material sUit f paCK Q ty QCM1-6 QKC14 Copper 0.5–1.5 RED Vinyl 6.3 x 0.8 100 QCM2-6 QKC33 Copper 1.5–2.5 BLUE Vinyl 6.3 x 0.8 100 QCM5-6 QKC87 Copper 2.5–6.0 YELLOW Vinyl 6.3 x 0.8 100 Pre-Insulated Quick Connect Piggy Back i deal C rimping t OO l: 0560 & 0560 U ltra see from page 97 CarrOll PART NO. QUiKCrimp PART NO. grip wire size mm² insUlatiOn COlOUr insUlatiOn material sUit tab paCK Q ty QCF1-6P QKC15 Copper 0.5–1.5 RED Vinyl 6.3 x 0.8 100 QCF2-6P QKC34 Copper 1.5–2.5 BLUE Vinyl 6.3 x 0.8 100 QCF5-6P Copper 2.5–6.0 YELLOW Vinyl 6.3 x 0.8 100 Pre-Insulated Bullet Male i deal C rimping t OO l: 0560 & 0560 U ltra see from page 97 CarrOll PART NO. QUiKCrimp PART NO. grip wire size mm² insUlatiOn COlOUr insUlatiOn material bUllet Ø mm paCK Q ty BCM1-4 QKC17 Copper 0.5–1.5 RED Vinyl 4 100 BCM2-5 QKC36 Copper 1.5–2.5 BLUE Vinyl 5 100 BCM5-5 QKC56 Copper 2.5–6.0 YELLOW Vinyl 5 100 Pre-Insulated Bullet Female i deal C rimping t OO l: 0560 & 0560 U ltra see from page 97 CarrOll PART NO. QUiKCrimp PART NO. grip wire size mm² insUlatiOn COlOUr insUlatiOn material bUllet Ø mm paCK Q ty BCF1-4 QKC18 Copper 0.5–1.5 RED Vinyl 4 100 BCF2-5 QKC37 Copper 1.5–2.5 BLUE Vinyl 5 100 BCF5-5 QKC57 Copper 2.5–6.0 YELLOW Vinyl 5 100 QKCN18 Copper 0.5–1.5 RED Nylon 4 100 QKCN37 Copper 1.5–2.5 BLUE Nylon 5 100 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 17

UninsUlated terminals TERMINALS ring terminals uninsulated Ring Terminals UninsUlated parallel spliCe PART NO. wire size mm² paCK Qty PSU1 0.5–1.5 100 PSU2 1.5–2.5 100 PSU5 2.5–6.0 100 uninsulated Parallel Splice ideal Crimping tOOl: hd0510 see pg 98 UninsUlated bUtt spliCe uninsulated Butt Splice PART NO. wire size mm² paCK Qty BS1 0.5–1.5 100 BS2 1.5–2.5 100 BS5 2.5–6.0 100 ideal Crimping tOOl: hd0510 see pg 98 PART NO. wire size mm² stUd size mm paCK Qty R1-3.5 0.5–1.5 3.7 100 R1-4 1.5 4.3 100 R1-5 0.5–1.5 5.3 100 R1-6 0.5–1.5 6.4 100 R2-3 1.5–2.5 3.2 100 R2-4 1.5–2.5 4.3 100 R2-5 1.5–2.5 5.3 100 R2-6 1.5–2.5 6.4 100 R2-8 1.5–2.5 8.4 100 R2-10 1.5–2.5 10.5 100 R5-4 2.5–6.0 4.3 100 R5-5 2.5–6.0 5.3 100 R5-6 2.5–6.0 6.4 100 R5-8 2.5–6.0 8.4 100 R5-10 2.5–6.0 10.5 100 spade terminals uninsulated Spade Terminals ideal Crimping tOOl: hd0510 see pg 98 PART NO. wire size mm² stUd size mm paCK Qty S1-3 0.5–1.5 3.2 100 S1-4 0.5–1.5 4.2 100 S1-5 0.5–1.5 5.3 100 S2-3.5 1.5–2.5 3.7 100 S2-4 1.5–2.5 4.2 100 S2-5 1.5–2.5 5.3 100 S5-5 2.5–6.0 5.3 100 S5-6 2.5–6.0 6.4 100

QU i K spli C e Quik Splice PART NO wire size mm² insUlatiOn COlOUr paCK Q ty 90803 4–6 YELLOW 100 90806 1.5–2.5 WHITE 100 B230 1.0–2 BLACK 100 “ f ” C rimp ring terminals flag terminal & ins U lat O r nne C t tabs 735075 adapt O r uninsulated Quick Connect Terminals & Insulator uninsulated “F” Crimp Ring Terminals PART NO wire size mm² st Ud size mm paCK Q ty 602402BL2 0.8–1.3 5.5 100 602501BL2 0.8–1.3 6.4 100 PART NO. wire size mm² type s U it tab l x w paCK Q ty 604001BL2 0.5–1.3 QC 2.8 x 0.5 100 605402BL2 0.85–1.25 TAB 6.3 x 0.8 100 604002VL INSULATOR 2.8 x 0.5 100 604201BL2 0.5–1.3 QC 4.8 x 0.8 100 604402BL2 0.8–2.0 QC 6.3 x 0.8 100 604402BLNK 0.8–2.0 NICKEL PLATED 6.35 x 0.8 100 604402VL PRE FIT INSULATOR 6.35 100 735075 POST FIT INSULATOR 6.35 100 H2852 0.7–1.5 QC FLAG 6.3 x 0.8 100 610201VL INSULATOR 100 2MF6 ADAPTOR 6.3 x 0.8 100 uninsulated Quick Connect Tabs PART NO. mOUnting hOle Ø type tab width mm paCK Q ty DT1 4.3 1 6.3 100 DT145 4.3 2 6.3 100 DT145/5.3 5.3 2 6.3 100 DT290 4.3 3 6.3 100 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 19

heat shrinKable

TeRMINAlS

PRe-INSulATed

The Carroll range of sealed, heat shrinkable crimp terminals are the perfect solution for single wire terminations in corrosive environments, such as marine. The tin plated copper terminals feature a tough, heat shrinkable, adhesive lined, colour coded insulation. After completion of the standard crimping process, the terminal insulation is then heated with a heat gun or small gas torch. Within seconds, the terminal insulation then shrinks and the internal adhesive sealant melts and ﬂows to provide a permanent seal and bond to the wire insulation. TERMINALS Heat Shrinkable Pre-Insulated Ring Terminals heat shrinKable PRe-INSulATed ring terminals PART NO. wire size mm² insUlatiOn COlOUr stUd size mm paCK Qty RW1-3.5 0.5–1.5 RED 3.7 25 RW1-4 0.5–1.5 RED 4.2 25 RW1-5 0.5–1.5 RED 5.3 25 RW1-6 0.5–1.5 RED 6.4 25 RW2-3.5 1.5–2.5 BLUE 3.7 25 RW2-4 1.5–2.5 BLUE 4.2 25 RW2-5 1.5–2.5 BLUE 5.3 25 RW2-6 1.5–2.5 BLUE 6.4 25 RW2-8 1.5–2.5 BLUE 8.5 25 RW2-10 1.5–2.5 BLUE 10.5 25 RW5-4 2.5–6.0 YELLOW 4.2 25 RW5-5 2.5–6.0 YELLOW 5.3 25 RW5-6 2.5–6.0 YELLOW 6.4 25 RW5-8 2.5–6.0 YELLOW 8.5 25 RW5-10 2.5–6.0 YELLOW 10.5 25 RW5-12 2.5–6.0 YELLOW 13 25 ideal Crimping tOOl: 0560 & 0560 Ultra see from page 97 HeAT SHRINKABle PRe-INSulATed TeRMINAlS THe eXPeRT’S CHOICe.

Heat Shrinkable Pre-Insulated Spade Terminals PART NO wire size mm² insUlatiOn COlOUr st Ud size mm paCK Q ty SW1-3.5 0.5–1.5 RED 3.7 25 SW1-4 0.5–1.5 RED 4.2 25 SW1-5 0.5–1.5 RED 5.3 25 SW2-3.5 1.5–2.5 BLUE 3.7 25 SW2-4 1.5–2.5 BLUE 4.2 25 SW2-5 1.5–2.5 BLUE 5.3 25 SW5-5 2.5–6.0 YELLOW 5.3 25 SW5-6 2.5–6.0 YELLOW 6.4 25 Heat Shrinkable Fully Insulated Quick Connect Female PART NO wire size mm² insUlatiOn COlOUr st Ud tab paCK Q ty QWF1-6F 0.5–1.5 RED 6.3 x 0.8 25 QWF2-6F 1.5–2.5 BLUE 6.3 x 0.8 25 QWF5-6F 2.5–6.0 YELLOW 6.3 x 0.8 25 Heat Shrinkable Fully Insulated Quick Connect Male PART NO. wire size mm² insUlatiOn COlOUr st Ud tab paCK Q ty QWM1-6 0.5–1.5 RED 6.3 x 0.8 25 QWM2-6 1.5–2.5 BLUE 6.3 x 0.8 25 QWM5-6 2.5–6.0 YELLOW 6.3 x 0.8 25 Heat Shrinkable Pre-Insulated Bullet Male PART NO. wire size mm² insUlatiOn COlOUr bUllet Ø mm paCK Q ty BWM2-5 1.5–2.5 BLUE 5 25 Heat Shrinkable Pre-Insulated Bullet Female PART NO. wire size mm² insUlatiOn COlOUr bUllet Ø mm paCK Q ty BWF2-5 1.5–2.5 BLUE 5 25 Heat Shrinkable Pre-Insulated Butt Splice PART NO. wire size mm² insUlatiOn COlOUr paCK Q ty BSW1 0.5–1.5 RED 25 BSW2 1.5–2.5 BLUE 25 BSW5 2.5–6.0 YELLOW 25 BSW1/100 0.5–1.5 RED 100 BSW2/100 1.5–2.5 BLUE 100 BSW5/100 2.5–6.0 YELLOW 100 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 21

end sleeVe bOOt laCe ferrUles Designed to be crimped onto the end of ﬂexible wires and cables before insertion into rail mounted or screw terminals, to provide protection to the fragile wire strands against bending back and breakage. Featuring a funnel entry, the fine electrolytic copper tubes are tin plated for superior conductivity and corrosion resistance. Pre-insulated ferrules are colour coded by size for easy product selection. Pre-Insulated end Sleeve (Boot lace) Ferrules - Reel Note: Three standards of colour coding exist. This colour coding standard offered by Carroll is the most widely recognised and accepted. TERMINALS Pre-Insulated end Sleeve (Boot lace) Ferrules PRe-INSulATed end sleeVe (BOOT lACe) FeRRuleS (BOOT lACe) FeRRuleS (BOOT lACe) FeRRuleS PRe-INSulATed end sleeVe ferrUles reel PART NO. wire size mm² insUlatiOn COlOUr insUlatiOn material pin length mm paCK Qty A00352 0.34 PINK Nylon 6 500 A00382 0.34 PINK Nylon 8 500 A00552 0.5 WHITE Nylon 8 500 A00752 0.75 BLUE Nylon 8 500 A01052 1 RED Nylon 8 500 A01552 1.5 BLACK Nylon 8 500 A01582 1.5 BLACK Nylon 10 500 A02552 2.5 GREY Nylon 8 500 A02582/100 2.5 GREY Nylon 18 100 A04052 4 ORANGE Nylon 9 100 A04082 4 ORANGE Nylon 12 100 A06052 6 GREEN Nylon 12 100 A06082 6 GREEN Nylon 18 100 A10052 10 BROWN Nylon 12 100 A10082 10 BROWN Nylon 18 100 A16052 16 WHITE Nylon 12 50 A16082 16 WHITE Nylon 18 50 A25082 25 BLACK Nylon 18 20 A25092 25 BLACK Nylon 22 20 A35082 35 RED Nylon 16 20 A35092 35 RED Nylon 25 20 A50082 50 BLUE Nylon 20 10 A70082 70 YELLOW Nylon 20 10 A95082 95 RED Nylon 25 10 PART NO. wire size mm² insUlatiOn COlOUr pin length mm paCK Qty AR0552 0.5 WHITE 8 1000 AR0752 0.75 BLUE 8 1000 AR1052 1 RED 8 1000 AR1552 1.5 BLACK 8 1000 AR2552 2.5 GREY 8 500

uninsulated

end Sleeve (Boot lace) Ferrules Designed to be fitted onto the ends of ﬂexible wires and cables prior to insertion into components, to provide protection to the wire strands. Specifically suited to applications where limited space prohibits the use of standard pre-insulated ferrules. Pre-Insulated Twin end Sleeve (Boot lace) Ferrules Designed to be crimped onto the end of two wires. This facilitates daisy chaining and termination of two wires into the tight spaces experienced in today’s electrical equipment. PART NO. wire size mm² pin length mm paCK Qty AU00552 0.5 6 500 AU00752 0.75 6 500 AU01052 1 6 500 AU01552 1.5 7 500 AU01582 1.5 10 500 AU02552 2.5 7 500 AU02572 2.5 12 500 AU04052 4 9 100 AU04082 4 12 100 AU06052 6 10 100 AU06082 6 15 100 AU06092 6 20 100 AU10082 10 15 100 AU10092 10 20 100 AU16082 16 15 100 AU16092 16 20 100 AU25082 25 18 50 AU35082 35 20 50 AU50082 50 22 10 AU70802 70 25 10 AU95082 95 25 10 UninsUlated end sleeVe PRe-INSulATed twin end sleeVe PART NO. wire size mm² insUlatiOn COlOUr insUlatiOn material pin length mm paCK Qty AT0752 2 x 0.75 GREY Nylon 8 100 AT1052 2 x 1.0 RED Nylon 8 100 AT1552 2 x 1.5 BLACK Nylon 8 100 AT2552 2 x 2.5 BLUE Nylon 10 100 AT4052 2 x 4 GREY Nylon 12 50 AT6052 2 x 6 YELLOW Nylon 14 50 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 23

CarrOll Cable lUgs & linKs

Carroll Copper lugs and links

Manufactured from fully annealed, 99.95% pure high conductivity copper and are electro-tin plated for superior corrosion resistance. Carroll lugs also include crimp lines for improved accuracy during installation.

Featuring:

• 99.95% pure electrolytic copper

• Electrical conductivity 99.7% IACS

• Oxygen content 30 ppm max

• Fully annealed

• 5-10 Micron, 99.9% pure tin plating

• Operating temperature range of -55 to 155°C

• Conformant standards: AS/NZS 4325 - Part 1.

• Lug sizes 10 to 630mm2 are supplied bell mouth as standard

• All other sizes are straight barrel type

• Printed crimp line marks for added guidance

• Inspection window to assist with cable insertion

Carroll Circuit Breaker / Narrow Palm lugs

Palm widths of standard copper lugs are too wide to fit 150 - 250A circuit breakers. Carroll has a comprehensive range of circuit breaker lugs which also feature a convenient bell mouth to facilitate easy insertion of flexible cables. These lugs utilise standard barrel dimensions, normal crimping rules using standard tools and crimp dies apply.

Carroll long Palm-long Barrel lugs

Carroll Long Palm-Long Barrel Lugs are designed to accommodate two bolt mounting for secure termination. The longer barrel allows improved surface area for heatshrink sealing and multiple crimps if desired.

• Sizes 300mm2 and above are supplied blank.

• Designed to be crimped with standard hexagonal dies and tooling.

Quikcrimp Cable lugs

Manufactured from fully annealed, 99.95% pure high conductivity copper and are electro-tin plated for superior corrosion resistance. Quikcrimp lugs also include crimp lines for improved accuracy during installation. Available in lug sizes from 10 to 95mm2 and are supplied as pack of 10 lugs.

CarrOll

lUg

COpper Crimp linK

lOng palm lOng barrel

QUiKCrimp

lUg

TERMINALS

COpper Cable

CirCUit breaKer

COpper Cable

CUL6-5

4.8 10 9 6 5 22

12 9 8 6 26

5.5 13 9 11 8 32

5.5 10 9 6 5 23

5.5 12 9 9 6 27

5.5 12 9 9 6 27 CUL6-10 100

6 10.5 3.8 6.2 16 10 11 8 32

CUL10-5 100 QCU10-5 10 Bell Mouth 10 5.3 4.7 7.1 12 10 7 6 27 CUL10-6/50 50 QCU10-6 10 Bell Mouth 10 6.4 4.7 7.1 12 10 7 6 27

CUL10-8 100 QCU10-8 10 Bell Mouth 10 8.4 4.7 7.1 14 10 8 7 29 CUL10-10 100 QCU10-10

Bell Mouth 10 10.5 4.7 7.1 16 10 11 8 32 CUL10-12

Bell Mouth 10 13 4.7 7.1 18 10 13 10 37 CUL16-6

Bell Mouth 16 6.4 5.5 7.9 11 19 8 6 37 CUL16-8

QCU16-6

Bell Mouth 16 8.4 5.5 7.9 14 19 9 7 39 CUL16-10

QCU16-8

QCU16-10

Bell Mouth 16 10.5 5.5 7.9

19 10 8

18 19

9 7

10 9

Copper Cable lugs Carroll copper lugs and links are manufactured from fully annealed, 99.95% pure high conductivity copper and are electro-tin plated for superior corrosion resistance. Carroll lugs also include crimp lines for improved accuracy during installation. CarrOll PART NO. CarrOll paCK Q ty QUiKCrimp PART NO. QUiKCrimp paCK Q ty barrel type wire size mm² dimensiOns mm Ø st Ud e Ø barrel id Ø barrel Od palm width barrel l ength distanCe frOm barrel distanCe frOm tOp tO tal l ength e a C d b h g J CUL1.5-5 100 Straight 1.5 5.3 1.8 3.7 8 7 5 4 18 CUL1.5-6 100 Straight 1.5 6.4 1.8 3.7 10 7 6 5 20 CUL2.5-4 100 Straight 2.5 4.2 2.4 4 8 8 5 4 19 CUL2.5-5 100 Straight 2.5 5.3 2.4 4 10 8 6 5 21 CUL2.5-6 100 Straight 2.5 6.4 2.4 4 10 8 6 5 21 CUL2.5-8 100 Straight 2.5 8.4 2.4 4 11 7 9 6 24 CUL4-5 100 Straight 4 5.3 3.1 4.8 10 9 6 5 22 CUL4-6 100 Straight 4 6.4 3.1

CUL4-8 100 Straight 4 8.4 3.1 4.8

CUL4-10 100 Straight 4 10.5 3.1

100 Straight 6 5.3 3.8

CUL6-6 100 Straight 6 6.4 3.8

CUL6-8 100 Straight 6 8.4 3.8

Straight

100

41 CUL16-12 50 QCU16-12 10 Bell Mouth 16 13 5.5 7.9

13 10 46 CUL25-6 50 QCU25-6 10 Bell Mouth 25 6.4 7.1 9.5 14 21

41 CUL25-8 50 QCU25-8 10 Bell Mouth 25 8.4 7.1 9.5 14 21

41 CUL25-10 50 QCU25-10 10 Bell Mouth 25 10.5 7.1 9.5 16 21

44 CUL25-12 50 QCU25-12 10 Bell Mouth 25 13 7.1 9.5 18 21 13 10 48 CUL35-6 50 QCU35-6 10 Bell Mouth 35 6.4 8.2 11.2 16 21 10 9 45 CUL35-8 50 QCU35-8 10 Bell Mouth 35 8.4 8.2 11.2 16 21 10 9 45 CUL35-10 50 QCU35-10 10 Bell Mouth 35 10.5 8.2 11.2 18 21 10 9 46 CUL35-12 50 QCU35-12 10 Bell Mouth 35 13 8.2 11.2 20 21 13 11 50 CUL50-6 50 QCU50-6 10 Bell Mouth 50 6.4 9.5 12.8 18 22 11 9 48 CUL50-8 50 QCU50-8 10 Bell Mouth 50 8.4 9.5 12.8 18 22 11 9 48 CUL50-10 50 QCU50-10 10 Bell Mouth 50 10.5 9.5 12.8 18 22 11 9 48 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 25

20.6 29 30

20.6 29 30 14 12

25 Bell Mouth 120 13 15.6 20.6 29 30 14 12 64

CUL120-16 25 Bell Mouth 120 17 15.6 20.6 29 30 16 16 70

CUL150-10 20 Bell Mouth 150 10.5 16.7 22.5 32 30 16 16 71

CUL150-12 20 Bell Mouth 150 13 16.7 22.5 32 30 20.5 20.5 80

CUL150-16 20 Bell Mouth 150 17 16.7 22.5 32 30 20.5 20.5 80

CUL185-10 20 Bell Mouth 185 10.5 18.4 24.2 35 32 16 16 74

CUL185-12 20 Bell Mouth 185 13 18.4 24.2 35 32 20.5 20.5 83

CUL185-16

CUL240-0

CUL240-10

CUL240-12

Mouth 185 17 18.4 24.2 35 32 20.5 20.5 83

Mouth 240 21.2 28.2 40 38 42 42 92

Mouth 240 10.5 21.2 28.2 40 38 21 21 92

Mouth

21.2 28.2 40 38 21 21 92

TERMINALS Copper Cable lugs continued CarrOll PART NO. CarrOll paCK Qty QUiKCrimp PART NO. QUiKCrimp paCK Qty barrel type wire size mm² dimensiOns mm Ø stUd e Ø barrel id Ø barrel Od palm width barrel length distanCe frOm barrel distanCe frOm tOp tOtal length e a C d b h g J CUL50-12 50 QCU50-12 10 Bell Mouth 50 13 9.5 12.8 21 22 13 11 52 CUL70-6 25 QCU70-6 10 Bell Mouth 70 6.4 11.2 14.3 21 24 13 11 54 CUL70-8 25 QCU70-8 10 Bell Mouth 70 8.4 11.2 14.3 21 24 13 11 54 CUL70-10 25 QCU70-10 10 Bell Mouth 70 10.5 11.2 14.3 21 24 13 11 54 CUL70-12 25 QCU70-12 10 Bell Mouth 70 13 11.2 14.3 21 24 13 11 54 CUL70-16 25 Bell Mouth 70 17 11.2 14.3 28 24 18 16 64 CUL95-6 25 QCU95-6 10 Bell Mouth 95 6.4 13.5 17.4 25 27 14 12 60 CUL95-8 25 QCU95-8 10 Bell Mouth 95 8.4 13.5 17.4 25 27 14 12 60 CUL95-10 25 QCU95-10 10 Bell Mouth 95 10.5 13.5 17.4 25

14 12 60 CUL95-12 25 QCU95-12 10 Bell Mouth 95 13 13.5 17.4 25

14 12 60 CUL95-16 25 Bell Mouth 95 17 13.5 17.4 28

16 14 64 CUL120-8 25 Bell Mouth 120 8.4 15.6

14 12 64 CUL120-10 25 Bell Mouth 120 10.5 15.6

64 CUL120-12

20 Bell

1 Bell

240 13

CUL240-16 1 Bell Mouth 240 17 21.2 28.2 40 38 21 21 92 CUL300-0 1 Bell Mouth 300 23.5 31.3 45 42 46 46 101 CUL300-12 1 Bell Mouth 300 13 23.5 31.3 45 42 23 23 101 CUL300-16 1 Bell Mouth 300 17 23.5 31.3 45 42 23 23 101 CUL400-0 1 Bell Mouth 400 26.8 34.8 50 44 52 52 114 CUL400-12 1 Bell Mouth 400 13 26.8 34.8 50 44 28 24 114 CUL400-16 1 Bell Mouth 400 17 26.8 34.8 50 44 28 24 114 CUL500-0 1 Bell Mouth 500 30 39 56 50 28 28 124 CUL500-12 1 Bell Mouth 500 13 30 39 56 50 28 28 124 CUL500-16 1 Bell Mouth 500 17 30 39 56 50 28 28 124 CUL630-0 1 Bell Mouth 630 34 45 65 58 28 28 134 CUL630-12 1 Bell Mouth 630 13 34 45 65 58 28 28 134 CUL630-16 1 Bell Mouth 630 17 34 45 65 58 28 28 134

14.3 21 12 11 24

17.4 25 12.5 12 27

17.4 25 12.5 12 27

Carroll

Australasia Pty Ltd

reserves the right to change product specifications without prior written notice. 90 ° angled COpper lUgs 90 ° angled COpper lUgs 90° Angled Copper lugs The extended range of copper lugs to Carroll have a pre-formed 90 degree angled palm. Some features are: • Fully annealed 99.95% pure electrolytic copper • Designed for cable sizes 50mm2, 70mm2 or 95mm2 • Stocked in 8mm, 10mm or 12mm stud holes sizes • Inspection window facilitates full insertion of the cable CarrOll PART NO. CarrOll paCK Qty QUiKCrimp PART NO. QUiKCrimp paCK Qty barrel type wire size mm² dimensiOns mm Ø stUd e Ø barrel id Ø barrel Od palm width distanCe frOm barrel distanCe frOm tOp barrel length e a C d h g b QCU16-8/90 10 Straight 16 8.4 5.5 7.9 14 8.4 7 19 QCU16-10/90 10 Straight 16 10.5 5.5 7.9 16 9.5 8 19 QCU25-8/90 10 Straight 25 8.4 7.1 9.5 14 8 7 21 QCU25-10/90 10 Straight 25 10.5 7.1 9.5 16 9 9 21 QCU35-8/90 10 Straight 35 8.4 8.2 11.2 16 9 9 21 QCU35-10/90 10 Straight 35 10.5 8.2 11.2 18 9 9 21 CUL50-8/90 50 QCU50-8/90 10 Straight 50 8.4 9.5 12.8 18 9 8 22 CUL50-10/90 50 QCU50-10/90 10 Straight 50 10.5 9.5 12.8 18 9 8 22 CUL50-12/90 50 QCU50-12/90 10 Straight 50 13 9.5 12.8 21 12 11 22 CUL70-8/90 25 QCU70-8/90 10 Straight 70 8.4 11.3

CUL70-10/90 25 QCU70-10/90 10 Straight 70 10.5 11.3

CUL70-12/90 25 QCU70-12/90 10 Straight 70 13 11.3

CUL95-8/90 25 QCU95-8/90 10 Straight 90 8.4 13.5

CUL95-10/90 25 QCU95-10/90 10 Straight 90 10.5 13.5

CUL95-12/90 25 QCU95-12/90 10 Straight 90 13 13.5

quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 27

TERMINALS Copper Crimp links PART NO. wire size mm² a J paCK Qty CUI1.5 1.5 1.8 22 100 CUI2.5 2.5 2 22 100 CUI4 4 3.3 22 100 CUI6 6 3.8 22 100 CUI10 10 4.7 22 50 CUI16 16 5.5 44 50 CUI25 25 7.1 47 50 CUI35 35 8.4 47 50 CUI50 50 9.5 47 50 CUI70 70 11.3 50 25 CUI95 95 13.5 54 25 CUI120 120 15.6 65 25 CUI150 150 16.7 65 20 CUI185 185 18.4 65 20 CUI240 240 21.2 90 1 CUI300 300 23.8 90 1 CUI400 400 26.8 90 1 CUI500 500 30 112 1 CUI630 630 34 112 1 COpper Crimp linKs aChieVe fleXibility & strength WITH eVeRY CABlING TASK. CARROll HAS A WIde RANGe OF CIRCuIT BReAKeR luGS FOR YOuR NeXT JOB.

Circuit Breaker / Narrow Palm lugs

widths of standard copper lugs are too wide to fit 150 - 250A circuit breakers.

has a comprehensive range of circuit breaker lugs which also feature a convenient bell mouth to facilitate easy insertion of ﬂexible cables. These lugs utilise standard barrel dimensions, normal crimping rules using standard tools and crimp dies apply.

55 1 SCB120-8 Bellmouth 120 8.0 15.6

30.0 61 1 SCB120-10 Bellmouth 120 10.0 15.6

30.0 61 1 SCB120-12 Bellmouth 120 13.0

1 SCB150-8 Bellmouth 150 8.0

30.0

30.0 66 1 SCB150-10 Bellmouth 150 10.0 15.6

30.0

SCB150-12 Bellmouth 150 13.0

SCB185-10 Bellmouth 185 10.0

SCB185-12 Bellmouth 185 13.0

SCB240-10 Bellmouth

SCB240-12 Bellmouth

SCB300-10 Bellmouth

SCB300-12 Bellmouth

10.0

12.0

10.0

CirCUit breaKer narrOw palm lUgs dimensiOns mm PART NO. barrell type wire size mm² stUd size (mm) barrell id Ø palm width palm thiCKness barrell length tOtal lUg length paCK size e a d t b J SCB35-6 Bellmouth 35 6.0 8.4 15.0 3.0 21.0 41 25 SCB35-8 Bellmouth 35 8.4 8.4 15.0 3.5 21.0 41 25 SCB50-6 Bellmouth 50 6.0 9.5 15.0 3.2 22.0 43 10 SCB50-8 Bellmouth 50 8.4 9.5 15.0 3.3 22.0 46 10 SCB50-10 Bellmouth 50 10.0 9.5 19.0 3.2 22.0 49 10 SCB70-6 Bellmouth 70 6.0 11.3 17.0 3.3 24.0 45 10 SCB70-8 Bellmouth 70 8.4 11.3 17.0 3.3 24.0 48 10 SCB70-10 Bellmouth 70 10.0 11.3 19.0 3.3 24.0 51 10 SCB95-8 Bellmouth 95 8.0 13.4 19.0 3.9 27.0 51 1 SCB95-10 Bellmouth 95 10.0 13.4 19.0 3.9 27.0

19.0 5.0

15.6 19.0 5.0

15.6 19.0 5.5

19.0 5.5

66 1

16.7 19.0 6.5 30.0 66 1

18.4 24.5 5.7 32.0 74 1

18.4 25.2 7.5 32.0 74 1

240

21.2 31.0 7.1 38.0 82 1

240

21.2 31.0 7.1 38.0 82 1

300

23.5 31.0 7.8 42.0 87 1

300 12.0 23.5 31.0 7.8 42.0 87 1

Palm

Carroll

quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 29

long Palm-long

TERMINALS

Barrel lugs Carroll Long Palm-Long Barrel Lugs are designed to accommodate two bolt mounting for secure termination. The longer barrel allows improved surface area for heatshrink sealing and multiple crimps if desired. Sizes 300mm2 and above are supplied blank. Designed to be crimped with standard hexagonal dies and tooling. PART NO. wire size mm² stUd size a b C d (P-WTH) e f paCK Qty LPLB16-6 16 6 86 61 1.5 16 22 20 10 LPLB16-8 16 8 86 61 1.5 16 22 19.8 10 LPLB25-8 25 8 95 61 1.9 16 29 19.8 10 LPLB25-10 25 10 95 61 1.9 16 29 20.2 10 LPLB35-8 35 8 112 72 2.6 18 35 24. 2 10 LPLB35-10 35 10 112 72 2.6 18 35 24.6 10 LPLB35-12 35 12 112 72 2.6 18 35 24.3 10 LPLB50-10 50 10 130 80 3.3 18.2 45 27.4 10 LPLB50-12 50 12 130 80 3.3 18.2 45 27.6 10 LPLB70-10 70 10 154 100 3.5 21.2 49 33.7 10 LPLB70-12 70 12 154 100 3.5 21.2 49 34.5 10 LPLB95-10 95 10 161 100 3.9 25 55 33.9 1 LPLB95-12 95 12 161 100 3.9 25 55 34.1 1 LPLB120-10 120 10 168 100 5 28.5 62 33.9 1 LPLB120-12 120 12 168 100 5 28.5 62 34.4 1 LPLB150-12 150 12 169 100 5.8 32 62 34.1 1 LPLB185-12 185 12 174 100 7.1 34 65 36 1 LPLB240-12 240 12 192 100 7.1 40 82 36 1 LPLB300-0 300 208 105 7.7 45 92 BLANK 1 LPLB400-0 400 228 110 7.8 50 100 BLANK 1 LPLB500-0 500 235 110 8.5 56 106 BLANK 1 LPLB630-0 630 247 110 10.9 65 115 BLANK 1 lONG PAlM-lONG barrel lUgs E C B E A D B F CARROll CABle luGS & lINKS. GeT CRIMPING ANd TeRMINATING WITH OuR RANGe OF PROduCTS.

battery

terminals & prOteCtOrs 12 Volts in = 11.999 volts out. (25 times better than the SAE Standard) This is the superior, tested and documented conductivity, you can expect only from Quikcrimp Heavy Duty Battery Terminals and Lugs. Extended life and durability is also provided by protecting the electrical connection against corrosion, by applying a double thickness of tin plating to not only the battery terminal, but also to the bolt and specially stepped shoulder nuts. Chamfered cable entry for easy cable insertion; full height battery post clamp for maximum electrical contact with the battery post; crimp or solder compatible; permanent polarity stamping, and matched terminal and tool die colour coding, guarantees a simple, cost effective, permanent and reliable connection every time. Quikcrimp - Crimp Copper Battery Terminals PART NO. pOsitiVe PART NO. negatiVe terminal type Cable size mm2 COlOUr paCK Qty 4SP 4SN STRAIGHT 16 GREY 5 3SP 3SN STRAIGHT 25 GREY 5 2SP 2SN STRAIGHT 35 GREEN 5 2EP 2EN ELBOW 35 GREEN 5 2TEP 2TEN TWIN ELBOW 35 GREEN 5 0SP 0SN STRAIGHT 50 PINK 5 0EP 0EN ELBOW 50 PINK 5 0TEP 0TEN TWIN ELBOW 50 PINK 5 00SP 00SN STRAIGHT 70 BLACK 5 00EP 00EN ELBOW 70 BLACK 5 00TEP 00TEN TWIN ELBOW 70 BLACK 5 000SP 000SN STRAIGHT ORANGE 5 000EP 000EN ELBOW ORANGE 5 000TEP 000TEN TWIN ELBOW ORANGE 5 95SP 95SN STRAIGHT 95 PURPLE 5 95EP 95EN ELBOW 95 PURPLE 5 95TEP 95TEN TWIN ELBOW 95 PURPLE 5 120SP 120SN STRAIGHT 120 YELLOW 5 120EP 120EN ELBOW 120 YELLOW 5 120TEP 120TEN TWIN ELBOW 120 YELLOW 5 straight COnneCtOr elbOw COnneCtOr quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 31

battery Cable starter lUgs

TERMINALS

and linKs Quikcrimp offers three battery cable starter lug options. All are manufactured from high conductivity copper and are electro-tin plated for superior corrosion resistance. Lugs are available to suit 8 to 0000B&S (or 10 to 120mm2). Our copper tube lugs feature the bell mouth design for ‘Easy Entry’ of ﬂexible multi-stranded cables and show crimp lines for added guidance during installation. PVC Black and Red lug protectors are listed under the ‘Battery Terminal & Lug Protectors’ section. battery Cable gaUge and mm2 COpper diameter range mm stUd size mm tUbe battery lUg tOOling fOr tUbe style lUgs Only fOrmed battery lUg Cast battery lUg tOOling fOr Cast fOrmed & Cast lUgs Only 8 B&s Tycab 7.9mm2 Electra 7.1mm2 Weldflex 10mm2 3.5 - 4.5 5 6 8 10 LINK QCU10-5 QCU10-6 QCU10-8 QCU10-10 CUI10 HD0650 HD6120 HD1095 8-5 8-6 8-8 8-10 B8 HD1095 HD0510 6 B&s Tycab 13.6mm2 Electra 15.4mm2 Weldflex 16mm2 4.6 - 5.8 5 6 8 10 12 LINK QCU16-6 QCU16-8 QCU16-10 QCU16-12 CUI16 HD0650 HD6120 HD1095 8-5 8-6 8-8 8-10 8-12 HD1095 HD0516 4 B&s Tycab 20.3mm2 5.9 - 7.0 5 6 8 10 12 LINK QCU25-6 QCU25-8 QCU25-10 QCU25-12 HD0650 HD6120 HD1095 14-5 14-6 14-8 14-10 14-12 B14 (Grey) B410 B412 HD1095 HD1095 HDBTC HD1095 HDBTC 3 B&s Tycab 25.7mm2 Electra 23.0mm2 Weldflex 25mm2 7.1 - 7.7 6 8 10 12 LINK QCU25-6 QCU25-8 QCU25-10 QCU25-12 CUI25 HD0650 HD6120 HD1095 22-6 22-8 22-10 22-12 B22 (Grey) B410 B412 2 B&s Tycab 32.1mm2 Electra 32.5mm2 7.8 - 8.5 6 8 10 12 QCU35-6 QCU35-8 QCU35-10 QCU35-12 HD0650 HD6120 HD1095 22-6 22-8 22-10 22-12 (Grey) B310 B312 Weldflex 35mm2 6 8 10 12 QCU35-6 QCU35-8 QCU35-10 QCU35-12 HD0650 HD6120 HD1095 22-6 22-8 22-10 22-12 (Green) B206 B208 B210 B212 1 B&s Tycab 39.5mm2 Electra 40.6mm2 8.6 - 9.4 6 8 10 12 LINK QCU35-6 QCU35-8 QCU35-10 QCU35-12 CUI35 HD0650 HD6120 HD1095 *38-6 or 38-S6 *38-8 or 38-S8 *38-10 or 38-S10 *38-12 B38 (Green) B206 B208 B210 B212 HDBTC *HD1095 ONLY 0 B&s Tycab 49.2mm2 Electra 50.2mm2 Weldflex 50mm2 9.5 - 10.5 6 8 10 12 LINK QCU50-6 QCU50-8 QCU50-10 QCU50-12 CUI50 HD0650 HD6120 HD1095 *38-6 or 38-S6 *38-8 or 38-S8 *38-10 or 38-S10 *38-12 (Pink) B010 B012 HDBTC *HD1095 ONLY 00 B&s Tycab 64.3mm2 Electra 65.3mm2 Weldflex 70mm2 10.6 - 11.5 6 8 10 12 LINK QCU70-6 QCU70-8 QCU70-10 QCU70-12 CUI70 HD6120 HD1095 60-6 60-8 60-10 60-12 B60 (Black) B0010 B0012 000 B&s Tycab 85.1mm2 Electra 83.3mm2 11.6 - 12.7 6 8 10 12 16 LINK QCU95-6 QCU95-8 QCU95-10 QCU95-12 CUL95-16 CUI95 HD6120 HD1095 70-6 70-8 70-10 70-12 B70 (Orange) B00010 B00012 95mm2 Weldflex 95mm2 12.8 - 13.3 6 8 10 12 16 QCU95-6 QCU95-8 QCU95-10 QCU95-12 CUL95-16 HD6120 HD1095 70-6 70-8 70-10 70-12 (Purple) B9510 B9512 0000 B&s Tycab 104.7mm2 Electra 100.23mm2 Weldflex 120mm2 13.4 - 14.5 10 12 16 LINK CUL120-10 CUL120-12 CUL120-16 CUI120 HD6120 80-10 80-12 B80 (Yellow) B12012 tUbe battery lUg COpper Crimp linKs Cast battery lUg fOrmed battery lUg

battery terminals

This

the

Extended

Chamfered

and

Terminals.

nut.

can expect only from

the bolt

ensures a cost

•

volts in = 11.999 volts out (25 times better than the sae standard)

superior, tested and documented conductivity you

QUIKCRIMP Heavy Duty Battery

life

durability are provided by protecting the electrical connection against corrosion, by applying a double thickness of tin-plating to the battery terminal,

and specially stepped shoulder

cable entry for easy cable insertion, full height battery post clamp for maximum electrical contact to the battery post, crimp or solder compatible; permanent polarity stamping, and matched terminal and tool die colour coding,

effective, permanent and reliable connection every time.

Chamfered cable entry for easy cable insertion

Full height battery post clamp for maximum electrical contact to the battery post

Crimp or solder compatible

Permanent polarity stamping with matched terminal and tool die colour coding

Ensures a cost effective, permanent and reliable connection every time straight COnneCtOr twin elbOw COnneCtOr elbOw COnneCtOr PART NO. POSITIVe PART NO. NeGATIVe style battery Cable gaUge and mm2 COpper diameter mm COlOUr 4SP 4SN Straight 4 B&s Tycab 20.3mm2 5.9 - 7.0 Grey 4SP 4SN Straight 3 B&s Tycab 25.7mm2 Electra 23.0mm2 Weldflex 25mm2 7.1 - 7.7 Grey 3SP 3SN Straight 2 B&s Tycab 32.1mm2 Electra 32.5mm2 7.8 - 8.5 Grey 2SP 2EP 2TEP 2SN 2EN 2TEN Straight Elbow Twin 1 B&s Tycab 39.5mm2 Electra 40.6mm2 Weldflex 35mm2 8.6 - 9.0 Green 0SP 0EP 0SN 0EN Straight Elbow 0 B&s Tycab 49.2mm2 Electra 50.2mm2 Weldflex 50mm2 9.5 - 10.5 Pink 00SP 00EP 00TEP 00SN 00EN 00TEN Straight Elbow Twin 00 B&s Tycab 64.3mm2 Electra 65.3mm2 Weldflex 70mm2 10.6 - 11.5 Black 000SP 000EP 000TEP 000SN 000EN 000TEN Straight Elbow Twin 000 B&s Tycab 85.1mm2 Electra 83.3mm2 11.6 - 12.7 Orange 95SP 95EP 95TEP 95SN 95EN 95TEN Straight Elbow Twin 95mm2 Weldflex 95mm2 12.8 - 13.3 Purple 120SP 120EP 120SN 120EN Straight Elbow 0000 B&s Tycab 104.7mm2 Electra 100.23mm2 Weldflex 120mm2 13.4 - 14.5 Yellow quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 33

TERMINALS Crimp Battery lugs PART NO. POSITIVe PART NO. NeGATIVe terminal type Cable size mm2 paCK Qty B410 B412 3/4 16 5 B310 B312 2 25 5 PART NO. 6mm stUd PART NO. 8mm stUd Cable stUd b & s Cable size mm2 paCK Qty B206 B208 1 35 5 - B9508 95 5 - B9508/50 95 50 twin elbOw COnneCtOr Marine disconnect Battery Terminals PART NO. POSITIVe PART NO. NeGATIVe wire size mm2 stUd size mm paCK Qty MPL MNL 10 8 5 marine disCOnneCt battery terminal Military Style Battery Terminals PART NO. POSITIVe PART NO. NeGATIVe COnstrUCtiOn mil speC paCK Qty MS5350P MS5349N Lead with zinc plated steel fastener A52425-1 (P) A52425-2 (P) 5 military style battery terminal lUg COnneCtOr PART NO. 10mm stUd PART NO. 12mm stUd Cable stUd b & s Cable size mm2 paCK Qty B210 B212 1 35 5 B010 B012 1 & 0 50 5 B010/50 B012/50 1 & 0 50 50 B0010 B0012 00 70 5 B0010/50 B0012/50 00 70 50 B00010 B00012 000 5 B9510 B9512 95 5 B9510/50 B9512/50 95 50 - B12012 120 5

CarrOll & QUiKCrimp TOdAY. 35quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au CHeCKING OFF All THe PARTS, All THe SYSTeMS, THe TIGHTeNING ANd FASTeNING OF All COMPONeNTS... ChOOse

TERMINALS battery terminal & lUg prOteCtOrs Straight Protectors PART NO. Red PART NO. BlACK Cable size mm2 paCK Qty TPS13R TPS13B 35 5 TPS16R TPS16B 50 & 70 5 elbow Protectors PART NO. Red PART NO. BlACK Cable size mm2 paCK Qty TPE13R TPE13B 35 5 TPE16R TPE16B 70 5 lug Protectors PART NO. Red PART NO. BlACK Cable size mm2 paCK Qty LP13R LP13B 35 5 LP16R LP16B 70 5 Boot Protectors PART NO. Red PART NO. BlACK Cable size mm2 paCK Qty QTPBR QTPBB 50 & 70 1 left Protectors PART NO. Red PART NO. BlACK Cable size mm2 paCK Qty QTPLER QTPLEB 50 & 70 1 Right Protectors PART NO. Red PART NO. BlACK Cable size mm2 paCK Qty QTPRER QTPREB 50 & 70 1 dual entry Protectors PART NO. Red PART NO. BlACK Cable size mm2 paCK Qty QTPDER QTPDEB 50 & 70 1 straight COnneCtOr lUg prOteCtOr elbOw prOteCtOr bOOt prOteCtOr left prOteCtOr right prOteCtOr dUal entry prOteCtOr

PART NO. POSITIVe PART NO. NeGATIVe paCK Qty 6622-100R 6622-100B 100 battery terminal prOteCtiVe washers battery terminal aCCessOries Battery Terminal Protection Washers Designed to prevent power robbing corrosion and extend the life of the battery, terminals, lugs and connections. Supplied in a convenient resealable can. note: For red order 6622-100R, for black order 6622-100B. PART NO. sUpplied Od paCK Qty 6014-000 NUTS & BOLTS 50 Battery Terminal Nuts & Bolts PART NO. Red PART NO. BlACK sUpplied Od paCK Qty 5661-010R 5661-010B 13mm 10 5662-010R 5662-010B 19mm 10 5663-010R 5663-010B 25mm 10 Pre-Cut Adhesive lined Heatshrink Save time and space, and order heatshrink for your battery terminals and lugs, pre-cut and colour coded in red and black. The special tubing is adhesive lined to provide sealing and strain relief to the lug or terminal connection. heatshrinK QUiKCrimp’s gOt yOU COVered fOr all yOUr AuTOMOTIVe NeedS. quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 37

Crimp starter

TERMINALS PART NO. wire size awg wire size mm2 stUd size paCK Qty 8-5 8 6.6–10.5 5 50 8-6 8 6.6–10.5 6 50 8-8 8 6.6–10.5 8 50 8-10 8 6.6–10.5 10 50 8-12 8 6.6–10.5 12 50 B8 8 6.6–10.5 LINK 50 14-5 6 10.5–16.7 5 50 14-6 6 10.5–16.7 6 50 14-8 6 10.5–16.7 8 50 14-10 6 10.5–16.7 10 50 14-12 6 10.5–16.7 12 50 B14 6 10.5–16.7 LINK 50 22-6 4 16.7–27.0 6 20 22-8 4 16.7–27.0 8 20 22-10 4 16.7–27.0 10 20 22-12 4 16.7–27.0 12 20 B22 4 16.7–27.0 LINK 20 38-S6 2 27.0–42.0 6 20 38-6 2 27.0–42.0 6 20 38-S8 2 27.0–42.0 8 20 38-8 2 27.0–42.0 8 20 38-S10 2 27.0–42.0 10 20 38-10 2 27.0–42.0 10 20 38-12 2 27.0–42.0 12 20 B38 2 27.0–42.0 LINK 20 60-6 1/0 42.0–66.0 6 20 60-8 1/0 42.0–66.0 8 20 60-10 1/0 42.0–66.0 10 20 60-12 1/0 42.0–66.0 12 20 B60 1/0 42.0–66.0 LINK 20 70-6 2/0 66.0–76.0 6 10 70-8 2/0 66.0–76.0 8 10 70-10 2/0 66.0–76.0 10 10 70-12 2/0 66.0–76.0 12 10 70-16 2/0 66.0–76.0 16 10 B70 2/0 66.0–76.0 LINK 10 80-10 3 76.0–85.0 10 5 80-12 3 76.0–85.0 12 5

lUgs & linKs Carroll battery lugs and links are fabricated in one piece from the finest electrolytic copper then electro tinned for optimum electrical performance. The unique short barrel is completely closed and the seam is brazed for uniform metal strength around the entire barrel area. Internal serrations guarantee optimum tensile strength and maximum electrical contact area after crimping. These lugs are designed for all power, automotive, aircraft and marine applications. Crimp battery lUg Crimp battery linK

7/1.70

19/1.53

19/1.78

18.7 18.8

22.8 22.9 25.1

27.4

14.5 31.2

23.1

CrOss area (MM²) stranding NO./WIRe (dIA.) O.d. OF COndUCtOr NO./ WIRe (dIA.) stranding nearest imperial stranding nearest A.W.G. Cable O.d. OF P.V.C. INS. single COre Xlpe/ pVC O.d. OF P.V.C. single COre sheathed O.d. OF single COre twO COre twO COre + earth three COre + earth fOUr COre + earth 1 1/1.13 1.13 1/.044 18 2.9 6.2 10.0 7/0.40 1.20 2 1/1.13 1.38 3/.029 16 3.2 6.6 10.5 10.6 11.8 12.7 7/0.50 1.50 1/.064 3 7/0.67 2.01 3/.036 14 3.8 7.2 11.8 11.9 13.2 14.2 7/.029 4 7/0.85 2.55 7/.036 12 4.8 8.2 13.4 13.5 15 16.4 6 7/1.04 3.12 7/1.04 9 5.3 8.7 14.6 14.6 16.2 17.7 10 7/1.35 4.05 7/.052 7 6.3 9.8 16.5 16.6 18.6 20.4 16

5.10 7/.064 5 7.3 10.8 10

19/.044 25 19/1.35 6.75 19/.052 3 9.4 13.0 12.1

27.8 35

7.65 19/.064 2 10.4 13.9 13

30.4 50

8.90 19/.072 1/0 12.0 15.6

34.9 70 19/2.14 10.70 19/.083 2/0 13.8 17.5 16.6 36.2 40.5 37/.064 95 37/1.78 12.46 37/.072 3/0 16.0 19.9 18.7 40.7 45.7 120 37/2.03 14.21 37/.083 250 MCM 17.7 21.7 20.7 44.9 50.6 150 37/2.25 15.75 37/.093 300 MCM 19.7 24.0 22.9 50 56.1 185 37/2.52 17.64 37/.103 350 MCM 22.0 26.5 25.3 55.7 63.2 240 61/2.25 20.25 61/.093 500 MCM 25.1 29.9 28.4 71.1 300 61/2.52 22.68 61/.103 600 MCM 27.9 33.1 31.4 79.2 400 61/2.85 25.65 91/.093 800 MCM 31.4 36.8 35.1 500 61/3.20 28.80 91/.103 1000 MCM 34.9 40.6 39 127/.093 630 127/2.52 32.76 127/.103 1200 MCM 38.9 45.0 43.9 Cable sizing referenCe gUide quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 39

prOteCtOrs HeAT SHRINK TuBING - duAl WAll 46 HeAT SHRINK TuBING - THIN WAll 42 HeAT SHRINK TuBING - HeAVY WAll 47 heat shrinK tape 51 nylOn snap bUshing 49 harnessfleX speCialised COndUit system 52 tapes 51 NYlON IP68 RATed CABle GlANdS 50 MeTAl IP68 RATed CABle GlANdS 50 fUses and fUse hOlders aUtO and manUal reset CirCUit breaKers diOdes 61 64 64

CarrOll heat shrinK tUbing

The wide range of Carroll heat shrinkable products ensure that whether you are insulating, colour coding, strain relieving, protecting or sealing, the right product is available to do the job.

grade: hs – General Purpose Tubing

This flexible Carroll Heat Shrink Tubing is manufactured from flame retardant, irradiated crosslinked, modified polyolefin. Recognised by Underwriters Laboratories (UL) and Canadian Standards (CSA), the tubing exhibits a VW-1 flame retardant rating, (except clear), is rated at 600V and has an operating temperature range of -55˚C to 125˚C. Shrink temperature is 70-125˚C and the shrink ratio is 2:1. Designed to insulate, colour code, strain relieve and provide abrasion and mechanical protection. Tubing is supplied in either 1.2m (4 ft) lengths or full spools. A complete range of diameters is available from 1.5mm to 102mm.

Grade: dWl – dual Wall Tubing

Carroll Dual Wall Tubing is manufactured from a co-extrusion of flame-retardant, flexible, 3:1 shrink ratio heat shrinkable tubing and a special adhesive lining. When the tubing is heated, the adhesive lining melts and flows to form a positive environmental seal. The lining adheres to the outer tubing and the surface below, creating an excellent barrier to moisture penetration.

Typical applications include the sealing and insulation of electrical splices, terminations, connector backshells, battery terminals and repairs to damaged cable. Due to the tubing’s flexibility, high shrink ratio and the wide variety of surfaces to which the adhesive will bond, the product is excellent in areas requiring corrosion and mechanical protection.

3:1 shrink ratio allows for insulation and sealing of irregular shapes. Dual wall provides increased mechanical protection while maintaining flexibility when installed. Adhesive bonds to a wide variety of plastics, rubber, and metals, including polyethylene, neoprene and steel.

grade: hwl – Heavy Wall Tubing

Carroll Heavy Wall Tubing is manufactured from chemically cross linked polyolefin heat shrinkable tubing with a shrink ratio 3:1, and a special adhesive lining. When the tubing is heated, the adhesive lining melts and flows to form a positive environmental seal. The lining adheres to the outer tubing and the surface below, creating an excellent barrier to moisture penetration.

The tubing exhibits excellent insulation capability and is resistant to cracking.

Typical applications include the sealing and insulation of outdoor and indoor electrical power joints, terminations, and repairs to damaged cable up to 1Kv.

dWl

- duAl WAll TuBING HWl - HeAVY wall tUbing quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 41 HS - GeNeRAl pUrpOse tUbing

PROTECTORS lengths HS Grade General Purpose, Thin Wall Tubing Carroll General Purpose Thin Wall Tubing is designed to insulate, colour code, strain relieve and provide abrasion and mechanical protection. Manufactured from a 2:1 shrink ratio, flexible, flame retardant, irradiated crosslinked, heat-shrinkable, modified polyolefin tubing. Features: • 2:1 shrink ratio • Resistance to chemical, copper corrosion and fungus • Flame retarded and self extinguishing* • Continuous operating temperature: -55ºC to 125ºC* • Fully shrink temperature: ≥ 125ºC* • Fully shrink temperature: ≥ 90ºC* (Green / Yellow) • RoHS compliant *Not applicable for ‘Clear’ coloured heat shrink PART NO. sUpplied Id (MM) reCOVered Id (MM) lay flat width Od (MM) COlOUr length /m HSL1.5BK 1.5 0.85 N/A BLACK 1.22 HSL1.5BL 1.5 0.85 N/A BLUE 1.22 HSL1.5C 1.5 0.85 N/A CLEAR 1.22 HSL1.5RD 1.5 0.85 N/A RED 1.22 HSL1.5W 1.5 0.85 N/A WHITE 1.22 HSL2BK 2.0 1.00 N/A BLACK 1.22 HSL2BL 2.0 1.00 N/A BLUE 1.22 HSL2C 2.0 1.00 N/A CLEAR 1.22 HSL2RD 2.0 1.00 N/A RED 1.22 HSL2W 2.0 1.00 N/A WHITE 1.22 HSL3BK 3.0 1.50 N/A BLACK 1.22 HSL3BL 3.0 1.50 N/A BLUE 1.22 HSL3C 3.0 1.50 N/A CLEAR 1.22 HSL3RD 3.0 1.50 N/A RED 1.22 HSL3W 3.0 1.50 N/A WHITE 1.22 HSL3Y 3.0 1.50 N/A YELLOW 1.22 HSL5BK 5.0 2.50 8.0 BLACK 1.22 HSL5BL 5.0 2.50 8.0 BLUE 1.22 HSL5C 5.0 2.50 8.0 CLEAR 1.22 HSL5RD 5.0 2.50 8.0 RED 1.22 HSL5W 5.0 2.50 8.0 WHITE 1.22 HSL5Y 5.0 2.50 8.0 YELLOW 1.22 HSL6BK 6.0 3.00 9.0 BLACK 1.22 HSL6BL 6.0 3.00 9.0 BLUE 1.22 HSL6C 6.0 3.00 9.0 CLEAR 1.22 HSL6GY 6.0 3.00 9.0 1.22 HSL6RD 6.0 3.00 9.0 RED 1.22 HSL6W 6.0 3.00 9.0 WHITE 1.22 HSL6Y 6.0 3.00 9.0 YELLOW 1.22 HS - GeNeRAl pUrpOse tUbing GRN/YEL

quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 43 HS Grade General Purpose, Thin Wall Tubing lengths PART NO. sUpplied Id (MM) reCOVered Id (MM) lay flat width Od (MM) COlOUr length /m HSL10BK 10.0 5.00 16.0 BLACK 1.22 HSL10BL 10.0 5.00 16.0 BLUE 1.22 HSL10C 10.0 5.00 16.0 CLEAR 1.22 HSL10GY 10.0 5.00 16.0 1.22 HSL10RD 10.0 5.00 16.0 RED 1.22 HSL10W 10.0 5.00 16.0 WHITE 1.22 HSL10Y 10.0 5.00 16.0 YELLOW 1.22 HSL13BK 13.0 6.50 20.0 BLACK 1.22 HSL13BL 13.0 6.50 20.0 BLUE 1.22 HSL13C 13.0 6.50 20.0 CLEAR 1.22 HSL13GY 13.0 6.50 20.0 1.22 HSL13RD 13.0 6.50 20.0 RED 1.22 HSL13W 13.0 6.50 20.0 WHITE 1.22 HSL13Y 13.0 6.50 20.0 YELLOW 1.22 HSL16BK 16.0 8.00 25.0 BLACK 1.22 HSL16RD 16.0 8.00 25.0 RED 1.22 HSL19BK 20.0 10.00 31.0 BLACK 1.22 HSL19BL 20.0 10.00 31.0 BLUE 1.22 HSL19C 20.0 10.00 31.0 CLEAR 1.22 HSL19GY 20.0 10.00 31.0 1.22 HSL19RD 20.0 10.00 31.0 RED 1.22 HSL19W 20.0 10.00 31.0 WHITE 1.22 HSL19Y 20.0 10.00 31.0 YELLOW 1.22 HSL25BK 25.0 12.50 39.0 BLACK 1.22 HSL25BL 25.0 12.50 39.0 BLUE 1.22 HSL25C 25.0 12.50 39.0 CLEAR 1.22 HSL25GY 25.0 12.50 39.0 1.22 HSL25RD 25.0 12.50 39.0 RED 1.22 HSL25W 25.0 12.50 39.0 WHITE 1.22 HSL25Y 25.0 12.50 39.0 YELLOW 1.22 HSL38BK 40.0 20.00 63.0 BLACK 1.22 HSL38BL 40.0 20.00 63.0 BLUE 1.22 HSL38C 40.0 20.00 63.0 CLEAR 1.22 HSL38GY 40.0 20.00 63.0 1.22 HSL38RD 40.0 20.00 63.0 RED 1.22 HSL38W 40.0 20.00 63.0 WHITE 1.22 HSL38Y 40.0 20.00 63.0 YELLOW 1.22 HS - GeNeRAl pUrpOse tUbing GRN/YEL GRN/YEL GRN/YEL GRN/YEL GRN/YEL

PROTECTORS hs spOOls HS Grade General Purpose, Thin Wall Tubing Spools lengths PART NO. sUpplied Id (MM) reCOVered Id (MM) lay flat width Od (MM) COlOUr length /m HSL51BK 50.0 25.00 79.0 BLACK 1.22 HSL51BL 50.0 25.00 79.0 BLUE 1.22 HSL51C 50.0 25.00 79.0 CLEAR 1.22 HSL51RD 50.0 25.00 79.0 RED 1.22 HSL51W 50.0 25.00 79.0 WHITE 1.22 HSL51Y 50.0 25.00 79.0 YELLOW 1.22 HSL76BK 80.0 40.00 126.0 BLACK 1.22 HSL76BL 80.0 40.00 126.0 BLUE 1.22 HSL76R 80.0 40.00 126.0 RED 1.22 HSL76W 80.0 40.00 126.0 WHITE 1.22 HSL102BK 100.0 50.00 157.0 BLACK 1.22 HSL102BL 100.0 50.00 157.0 BLUE 1.22 HSL102R 100.0 50.00 157.0 RED 1.22 HSL102W 100.0 50.00 157.0 WHITE 1.22 PART NO. sUpplied Id (MM) reCOVered Id (MM) lay flat width Od (MM) COlOUr length /m HS1.5BK 1.5 0.85 N/A BLACK 200 HS1.5C 1.5 0.85 N/A CLEAR 200 HS1.5W 1.5 0.85 N/A WHITE 304 HS2BK 2.0 1.00 N/A BLACK 200 HS2C 2.0 1.00 N/A CLEAR 200 HS3BK 3.0 1.50 N/A BLACK 200 HS3BL 3.0 1.50 N/A BLUE 200 HS3C 3.0 1.50 N/A CLEAR 200 HS3RD 3.0 1.50 N/A RED 200 HS3W 3.0 1.50 N/A WHITE 200 HS5BK 4.5 2.30 7.0 BLACK 100 HS5BL 4.5 2.30 7.0 BLUE 100 HS5C 4.5 2.30 7.0 CLEAR 100 HS5RD 4.5 2.30 7.0 RED 100 HS5W 4.5 2.30 7.0 WHITE 100 HS6BK 6.0 3.00 9.0 BLACK 50 HS6C 6.0 3.00 9.0 CLEAR 50 HS6RD 6.0 3.00 9.0 RED 50 HS6W 6.0 3.00 9.0 WHITE 50 HS6BL 6.0 3.00 9.0 BLUE 50 HS6GY-100 6.0 3.00 9.0 100 HS - GeNeRAl pUrpOse tUbing GRN/YEL

hs spOOls HS Grade General Purpose, Thin Wall Tubing Spools PART NO. sUpplied Id (MM) reCOVered Id (MM) lay flat width Od (MM) COlOUr length /m HS10C 10.0 5.00 16.0 CLEAR 50 HS10BK 10.0 5.00 16.0 BLACK 50 HS10BL 10.0 5.00 16.0 BLUE 50 HS10RD 10.0 5.00 16.0 RED 50 HS10W 10.0 5.00 16.0 WHITE 50 HS10GY-100 10.0 5.00 16.0 100 HS13BK 12.0 6.00 19.0 BLACK 50 HS13BL 12.0 6.00 19.0 BLUE 50 HS13RD 12.0 6.00 19.0 RED 50 HS13W 12.0 6.00 19.0 WHITE 50 HS13C 12.0 6.00 19.0 CLEAR 50 HS13GY-100 12.5 6.00 20.0 100 HS16BK 16.0 8.00 25.0 BLACK 50 HS16BL 16.0 8.00 25.0 BLUE 50 HS16C 16.0 8.00 25.0 CLEAR 50 HS16RD 16.0 8.00 25.0 RED 50 HS16W 16.0 8.00 25.0 WHITE 50 HS19BK 18.0 9.00 28.0 BLACK 50 HS19BL 18.0 9.00 28.0 BLUE 50 HS19RD 18.0 9.00 28.0 RED 50 HS19W 18.0 9.00 28.0 WHITE 50 HS19C 18.0 9.00 28.0 CLEAR 50 HS19GY-100 19.0 9.00 30.0 100 HS25BK 25.0 12.50 39.0 BLACK 50 HS25BL 25.0 12.50 39.0 BLUE 50 HS25C 25.0 12.50 39.0 CLEAR 50 HS25RD 25.0 12.50 39.0 RED 50 HS25W 25.0 12.50 39.0 WHITE 50 HS25GY-50 25.0 12.50 39.0 50 HS38BK 40.0 20.00 63.0 BLACK 50 HS38BL 40.0 20.00 63.0 BLUE 50 HS38C 40.0 20.00 63.0 CLEAR 30 HS38RD 40.0 20.00 63.0 RED 50 HS38W 40.0 20.00 63.0 WHITE 50 HS38GY-50 41.5 20.00 65.0 50 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 45 GRN/YEL GRN/YEL GRN/YEL GRN/YEL GRN/YEL

dWl Grade dual Wall Tubing

ﬂame-retardant,

form a positive

below,

include

backshells,

PROTECTORS

Carroll Dual Wall Tubing is manufactured from a co-extrusion of

ﬂexible, 3:1 shrink ratio heat shrinkable tubing with a special adhesive lining. When the tubing is heated, the adhesive lining melts and ﬂows to

environmental seal. The lining adheres to the outer tubing and the surface

creating an excellent barrier to moisture penetration. Typical applications

the sealing and insulation of electrical splices, terminations, connector

battery terminals and repairs to damaged cable. Due to the tubing’s ﬂexibility, high shrink ratio and the wide variety of surfaces to which the adhesive will bond, the product is excellent in areas requiring corrosion and mechanical protection. Features: • 3:1 shrink ratio • Flame retardant (outer jacket only) • Super sealing against water, moisture or other contaminants • Continuous operating temperature: -45ºC to 125ºC • Shrink temperature: 125ºC • RoHS compliant lengths dwl grade dUal wall tUbing PART NO. sUpplied id (MM) reCOVered Id (MM) length /m BLACK RED DWL3/1 DWL3/1R 3.2 1.0 1.22 DWL6/2 DWL6/2R 6.4 2.2 1.22 DWL9/3 DWL9/3R 9.5 3.2 1.22 DWL12/4 DWL12/4R 12.7 4.2 1.22 DWL19/6 DWL19/6R 19.1 6.3 1.22 DWL24/8 DWL24/8R 25.4 8.5 1.22 DWL40/13 DWL40/13R 39.0 13.5 1.22 HS Grade General Purpose, Thin Wall Tubing Spools PART NO. sUpplied Id (MM) reCOVered Id (MM) lay flat width Od (MM) COlOUr length /m HS51BK 50.0 25.00 79.0 BLACK 25 HS51BL 50.0 25.00 79.0 BLUE 25 HS51C 50.0 25.00 79.0 CLEAR 25 HS51RD 50.0 25.00 79.0 RED 25 HS51W 50.0 25.00 79.0 WHITE 25 HS76BK 80.0 40.00 126.0 BLACK 25 HS76RD 80.0 40.00 126.0 RED 25 HS76W 80.0 40.00 126.0 WHITE 25 HS76BL 80.0 40.00 126.0 BLUE 25 HS102BK 100.0 50.00 157.0 BLACK 25 HS102RD 100.0 50.00 157.0 RED 25 HS102W 100.0 50.00 157.0 WHITE 25 HS102BL 100.0 50.00 157.0 BLUE 25 hs spOOls

HWl Heavy Wall Adhesive lined Tubing

hwl

heaVy wall

adhesiVe

lined tUbing

Heavy Wall tubing provides a fast, clean, permanent, safe and cost effective method of sealing, insulating and protecting cable joints and terminations in underwater or underground applications. Voltage rated for 0.6/1kv applications, the tubing has a high variable shrink ratio, is UV resistant, and operates within a -45˚C to +125˚C temperature range. The polyamide - based adhesive provides a high bond strength and protection against moisture, aggressive ﬂuids and corrosion. lengths PART NO. sUpplied Id (MM) reCOVered Id (MM) COlOUr length /m HWL12/5 12 5 Black 1.22 HWL20/8 20 8 Black 1.22 HWL30/12 30 12 Black 1.22 HWL40/17 40 17 Black 1.22 HWL52/20 52 20 Black 1.22 HWL68/26 68 26 Black 1.22 HWL80/30 80 30 Black 1.22 HWL102/44 102 44 Black 1.22 HWL122/52 122 52 Black 1.22 HWL146/58 148 58 Black 1.22 dw spOOl PART NO. sUpplied id (MM) reCOVered Id (MM) length /m BLACK RED DW6/2 DW6/2R 6.4 2.2 100 DW9/3 DW9/3R 9.5 3.2 50 DW12/4 DW12/4R 12.7 4.2 25 DW19/6 DW19/6R 19.1 6.3 25 DW24/8 DW24/8R 25.4 8.5 25 DW40/13 DW40/13R 39 13.5 25 dWl Grade dual Wall Tubing Spools quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 47

PROTECTORS Heat Shrink Bus Bar Selection Chart For applicable Heat shrink diameters depth width 12mm 19mm 25mm 38mm 51mm 76mm 102mm 125mm 1/2” 3/4” 1” 1.5” 2” 3” 4” 5” 3.2mm 1/8 HS13 HS19 HS25 HS38 HS51 HS76 HS102 HS102 4.8mm 3/16 HS13 HS19 HS25 HS38 HS51 HS76 HS102 HS102 6.4mm 1/4 HS19 HS25 HS38 HS51 HS76 HS102 HS102 9.5mm 3/8 HS38 HS51 HS76 HS102 HS102 13mm 1/2 HS51 HS76 HS102 HS102 Note: Bends may require larger diameter heat shrink. Pre-heat bus bar before applying tubing for a more even ﬁnish. Heat Shrinkable end Caps - Adhesive lined Carroll heat shrinkable end caps are hot melt adhesive lined and are used to provide protection to cable ends against oxidation, ozone, UV and more. Continuous operating temperature: -45°C to 105°C Shrink temperature: start 110°C, fully recovered 130°C PART NO. sUpplied mm reCOVered id mm paCK Qty EC24/11 25 11 1 EC33/18 35 17 1 EC50/27 55 26 1 EC70/38 75 30 1 EC100/48 100 40 1 EC120/59 120 57 1 end Caps size seleCtiOn Chart To identify ordering diameter, match ﬂattened tubing against the horizontal line. 6mm 9mm L/F 10mm 12mm L/F 12mm 19mm L/F 16mm 25mm L/F 18mm 28mm L/F 25mm 39mm L/F FOR OTHeR SIZeS NOT SHOWN ABOVe, ReFeR TO THe lAY FlAT deTAIl SHOWN IN PART NO. TABleS see from page 42

quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 49 Recommended Heat Shrink for XlPe and Pyrolex Cable Application Cable size mm pVC gland fOr Xlpe heat shrinK fOr Xlpe metal gland fOr pyrOleX Cable lOCK nUt fOr metal gland heat shrinK fOr pyrOleX 16 CG16 HSL13 MG20LN LNM/M20 HSL13 25 CG20 HSL13 MG25LN LNM/M25 HSL13 35 CG20 HSL13 MG25LN LNM/M25 HSL19 50 CG20 HSL13 MG25LN LNM/M25 HSL19 70 CG25 HSL19 MG32LN LNM/M32 HSL19 95 CG25 HSL19 MG32LN LNM/M32 HSL19 120 CG32 HSL19 MG40LN LNM/M40 HSL25 150 CG32 HSL25 MG40LN LNM/M40 HSL25 185 CG40 HSL25 MG40LN LNM/M40 HSL25 240 CG40 HSL38 MG40LN LNM/M40 HSL38 300 CG40 HSL38 MG50LN LNM/M50 HSL38 400 CG50 HSL38 MG50LN LNM/M50 HSL38 500 CG50 HSL38 MG63LN LNM/M63 HSL38 630 CG63 HSL51 MG63LN LNM/M63 HSL51 snap bUshing PART NO. COlOUr mOUnting hOle mm id mm paCK Qty SB08 BLACK 7.9 5.2 100 SB10 BLACK 9.5 6.3 100 SB13 BLACK 13.0 8.2 100 SB16 BLACK 15.9 12.2 100 SB19 BLACK 18.9 14.3 100 SB22 BLACK 22.0 17.3 100 SB26 BLACK 25.1 19.1 100 SB30 BLACK 29.7 24.1 100 SB38 BLACK 38.1 29.0 100 SB45 BLACK 43.6 35.4 100 SB50 BLACK 50.8 41.6 100 nylOn snap bUshing Carroll snap bushings are moulded black UL approved Nylon 6/6, and feature a ﬂammability rating of 94V-2. The snap bushings provide a quick, simple and low cost means of protecting cables, hoses, ropes etc, from damage from raw edged holes in metal chassis.

nylOn Cable glands

metal Cable glands

RATed

PROTECTORS PART NO. thread Cable range paCK Qty CG12 M12 3–6.5mm 50 CG16 M16 5–10mm 50 CG20 M20 10–14mm 36 CG25 M25 13–18mm 16 CG32 M32 18–25mm 12 CG40 M40 22–32mm 6 CG50 M50 30–38mm 3 CG63 M63 34–44mm 2 CG63L M63 42–50mm 2

IP68 RATed Accepted as the Industry standard while also conforming to AS1939–1990 (IEC 529–1989), Carroll Nylon “BULLET” glands have been tested and certified to IP68. Our “BULLET” design speeds installation and reduces inventory through extended cable diameter range and eliminating the need to disassemble before installation. replaCement metal lOCK nUts PART NO. thread paCK Qty LNM/M12 M12 25 LNM/M16 M16 25 LNM/M20 M20 20 LNM/M25 M25 15 LNM/M32 M32 5 LNM/M40 M40 3 LNM/M50 M50 2 LNM/M63 M63 2 metal lOCKnUts metal gland PART NO. thread Cable range paCK Qty MG12LN M12 3-6mm 50 MG16LN M16 5-10mm 50 MG20LN M20 8-13mm 25 MG25LN M25 15-21mm 15 MG32LN M32 15-21mm 5 MG40LN M40 19-28mm 3 MG50LN M50 26-35mm 2 MG63LN-S M63 32-42mm 1 MG63LN M63 36-48mm 2

IP68

Carroll nickel plated brass ‘BULLET’ cable glands are tested (and certified) to IP68, in accordance with AS1939-1990. This rigid rating is your guarantee of superior grip, strain relief, sealing and protection of your electrical installations against the ingress of dust, moisture and submersion. Our ‘BULLET’ design speeds up installation and reduces inventory through extended cable diameter range, and eliminating the need to disassemble the gland before installation. Note: Metal glands are supplied with lock nuts as standard. Replacement lock nuts also sold separately.

NITTO NO.

15 gaffer tape dOUble sided tape PART NO. COlOUrs rOll length m paCK Qty NO.15 BLACK 10 1 PART NO. type ROll - l (m) x w (mm) COlOUr paCK Qty GAFFAB GAFFER 25m x 48mm BLACK 1 DUCT DUCT 30m x 48mm SILVER 1 DST1 DOUBLE SIDED 10m x 18mm BLACK 1 Self-Fusing electrical Insulating Tape No.15, self-fusing electrical insulating tape with butyl rubber backing. Designed for cable splicing and terminating, corona resistance of high voltage cables, water and corrosion protection of wires, cables and piping in marine and mining applications. Tapes - Gaffer, duct and double Sided Note: If applied to wire or cable at a stretch of 100-150%, the tape self fuses in just 1-2 hours. PART NO. COlOUr ROll - l (m) x w (mm) paCK Qty PVCTBK BLACK 20m x 18mm 10 PVCTRD RED 20m x 18mm 10 PVCTBL BLUE 20m x 18mm 10 PVCTW WHITE 20m x 18mm 10 PVCTGY GRN/YEL 20m x 18mm 10 PVCTMIX MIXED 20m x 18mm 10 PVCTOR ORANGE 20m x 18mm 10 tapes PVC electrical Tape Carroll PVC tape is designed for general electrical contracting and colour coding applications. Manufactured from 0.15 mm thick PVC, this tape also exhibits excellent adhesive and ageing properties with a high dielectric strength. pVC eleCtriCal tape quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 51 *Rainbow pack includes 3x black, 2x red, 2x white, 2x blue and 1x yellow/green.

harnessfleX speCialist COndUit systems harnessfleXHarnessflex conduit systems combine innovative design with precision manufacturing to offer customers a broad range of cable protection products and solutions. Fuel Tankers Trucks & Buses Construction & Mining Vehicles dangerous Goods Vehicle (ADR approved) Marine Vessels Critical Power Agricultural Vehicles Our range includes Conduits, Sealed Fittings and Hinged Fittings. The Harnessflex system performs in a wide variety of environments from high temperature to freezing subzero conditions. Whether used individually or in combination, Harnessflex products provide protection against not only liquid and dust ingress, but also mechanical abrasion and corrosive salts. Specifically designed to protect critical electrical and electronic wiring assemblies in heavy-duty commercial applications such as:

harnessfleX speCialised COndUit systems

Harnessﬂ ex combines innovative design with precision manufacturing to offer customers a broad range of cable protection products and solutions.

• Performs in a wide variety of environments from high temperature to freezing subzero conditions

• Extensive range of engineered solutions are designed to withstand the rigours of the most technically demanding applications

• Harnessﬂ ex Specialist Conduit Systems can be used to protect critical power and data cabling. ADR approved.

• Tested and approved to ANZ and International Standards

• Harnessﬂ ex hinged systems are rated at IP40.

• Harnessﬂ ex sealed systems are rated at IP66, 67, 68 (2 BAR for 30 mins) and 69k, when using Harnessﬂ ex conduit.

markets and industries

Harnessﬂ ex Specialist Conduit Systems can be used to protect critical power and data cabling and is available throughout a wide range of markets including:

• Dangerous Goods Vehicles

• Machinery

• Marine

• Mechanical

• Data Cabling

• Critical Power

Many components are designed specifically for a market solution. These products uniquely meet an industry’s needs - solving a specific application requirement, providing product innovation, saving installation and component costs, improving the quality and the integrity of the end product. Wherever you need mechanical and electrical protection for your cables you can be confident in specifying Harnessﬂex products.

Approvals

Harnessﬂ ex is tested and approved to International Standards, i.e. TUV & LCIE, for the widest variety of automotive applications including hazardous or aggressive fuel or chemical transportation environments. In Australia and New Zealand, Harnessﬂ ex is approved and meets the requirements specifi ed in AS2809 for Dangerous Goods Vehicles, e.g. fuel tankers. It is also the system specifi ed by the leading Australian heavy duty truck manufacturers. ADR Approved.

copies of adr approvals are available upon request.

CARROll.COM.Au/HARNeSSFleX 53

PROTECTORS harnessfleX speCifiCatiOns Harnessflex premium nylon conduit is designed to withstand temperatures from -40˚C to +120˚C for long term static use and has many features including: • Resistance to many oils, solvents and petrochemicals • Flexible tough construction with high impact strength and a long fatigue life • High UV resistance, halogen free and self extinguishing • Stocked in a wide range of sizes When used in conjunction with the extensive range of fittings and adaptors the Harnessflex system can achieve ip66, ip67, ip68 and ip69K and offers extreme versatility for both harness manufacturing and general purpose applications. the international protection (ip rating) and published performance specifications of Harnessflex fittings is only guaranteed by carroll australasia when used in conjunction with carroll supplied conduit. Harnessflex Chemical Compatibility ChemiCal mineral harnessfleX COndUit ChemiCal/ mineral harnessfleX COndUit ChemiCal/ mineral harnessfleX COndUit Astm oil no. 1 S Astm oil no. 2 S Astm oil no. 3 S Acetic acid (10%) L Acetone S Aluminum chloride (10%) L Benzene S Chlorine water U Diesel oil S Ethyl alcohol S Ethylene glycol (antifreeze) S Freon 32 S Hydrochloric acid (10%) U Hydrochloric acid (36%) U Hydrogen peroxide (35%) L Lactic acid (90%) L Lubricating oil S Methyl alcohol L Methyl ethyl ketone S Nitric acid (10%) U Nitric acid (70%) U Oxalic acid L Ozone gas U Paraffin oil S Petrol S Silver nitrate S Sodium chloride S Sodium hydroxide (10%) S Sodium h droxide (60%) S Sulphuric acid (10%) U Sulphuric acid (70%) U Toluene S Transformer oil S Trichlorethylene L Turpentine S Vegetable oils (general) S Vinyl acetate L Water (sea) S White spirit S Zinc chloride U Note: These results shown are based on exposure to individual chemicals at ambient temperature. All inorganic salts are saturated aqueous solutions unless otherwise stated. Key: S = Suitable L = Limited U = Unsuitable Harnessflex Physical Properties ChemiCal/mineral harnessfleX ChemiCal/ mineral harnessfleX COndUit Specific gravity 1.14 Melting point 220°C Max. Operating temperature static 120°C Max. Operating temperature dynamic 100°C Min. Operating temperature static -40°C Min operating temperature dynamic -30°C Tensile strength * 40MPa Elongation at break * 60% Flexural modulus * 1.0GPa Impact strength – notched izod * 0.25KJ/m Dielectric strength * 25MV/m Volume resistivity * 8 log ohm cm Halogen free Yes * The results are from test pieces of sheet material, conditioned at 23°C and 50% Relative Humidity, and not from finished products.

harnessfleX COndUit harnessfleX COndUit with dispenser bOX Nylon Flexible Conduit PART NO. nOminal size bOre Od mm length NC08 8 6.6 10 100m NC10 10 8.4 11.5 100m NC12 12 9.9 13 100m NC16 16 12.7 16.1 50m NC20 20 16.6 21.2 50m NC25 25 21.3 25.6 50m NC28 28 22.6 28.5 50m NC32 32 28.8 34.5 50m NC40 40 35.2 42.5 25m NC50 50 46.5 54.5 25m straight adapter bOdies Complete Straight Sealed Adapters (IP 66, 67, 68, 69K) Harnessﬂ ex straight adaptor bodies feature an anti vibration locking ring on the cap nut which ensures the fi tting remains tightened during assembly and in service. An integral neoprene ‘O’ ring embedded in the mounting face seals the fi tting against the junction box or enclosure. PART NO. desCriptiOn paCK Qty CAB10M16-CA KIT ADAPTOR BODY NC10/M16 X 10PC 10 CAB12M16-CA KIT ADAPTOR BODY NC12/M16 X 10PC 10 CAB12M20-CA KIT ADAPTOR BODY NC12/M20 X 10PC 10 CAB16M16-CA KIT ADAPTOR BODY NC16/M16 X 10PC 10 CAB16M20-CA KIT ADAPTOR BODY NC16/M20 X 10PC 10 CAB16PG13-CA KIT ADAPTOR BODY NC16/PG13 X 10PC 10 CAB20M20-CA KIT ADAPTOR BODY NC20/M20 X 10PC 10 CAB25M25-CA KIT ADAPTOR BODY NC25/M25 X 10PC 10 CAB32M32-CA KIT ADAPTOR BODY NC32/M32 X 10PC 10 CAB28M25-CA KIT ADAPTOR BODY NC28/M25 X 10PC 10 CAB40M40-CA KIT ADAPTOR BODY NC40/M40 X 1 1 Nylon Flexible Conduit - dispenser Box (Retail) PART NO. desCriptiOn length NC08/DB NC08 HFX CONDUIT WITH DISPENSER BOX 100m NC10/DB NC10 HFX CONDUIT WITH DISPENSER BOX 100m NC12/DB NC12 HFX CONDUIT WITH DISPENSER BOX 100m NC16/DB NC16 HFX CONDUIT WITH DISPENSER BOX 50m NC20/DB NC20 HFX CONDUIT WITH DISPENSER BOX 50m NC25/DB NC25 HFX CONDUIT WITH DISPENSER BOX 50m quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 55

CAB16M1690-CA

CAB20M2090-CA

NC16/M20MM

NC20/M20MM

NC25/M25MM

NC28/M25MM

NC32/M32MM

NC40/M40MM

PROTECTORS

‘t’ pieCe COnneCtOr

‘T’ Piece Connector (IP 66, 67, 68, 69K) PART NO. JOins t pieCes paCK Qty TPC16 CTP16 5 TPC20 CTPB20 5 TPC28 CTPB28 5 the international protection (ip rating) and published performance specifications of Harnessflex fittings is only guaranteed by carroll australasia when used in conjunction with carroll supplied conduit. COmplete flanged 90 ° adapter bOdies PART NO. COndUit size paCK Qty CAB40F90 40 1 Complete Flanged 90° Adapter Bodies (IP 66, 67, 68, 69K) Used in place of an electrical connector where cables need to be passed through a bulkhead. Complete 90° Adapter Bodies (IP 66, 67, 68, 69K) Harnessflex 90˚ adaptor bodies are similar to the straight adaptors, in that they feature anti vibration locking ring on the cap nut. The seal between the adaptor body and enclosure is achieved by the neoprene sealing face washer supplied in the kit. PART NO. desCriptiOn paCK Qty CAB10M1690-CA KIT 90 DEGREE A/BODY NC10/M16MM X 10PC 10 CAB12M1690-CA KIT 90 DEGREE A/BODY NC12/M16MM X 10PC 10

KIT 90 DEGREE A/BODY NC16/M16MM X 10PC 10 CAB16M2090-CA KIT 90 DEGREE A/BODY

X 10PC 10

KIT 90 DEGREE A/BODY

X 10PC 10 CAB25M2590-CA KIT 90 DEGREE A/BODY

X 10PC 10 CAB28M2590-CA KIT 90 DEGREE A/BODY

X 10PC 10 CAB32M3290-CA KIT 90 DEGREE A/BODY

X 1 1 CAB40M4090 KIT 90 DEGREE A/BODY

X 1 1

Complete ‘T’ Pieces (IP 66, 67, 68,

Harnessflex

Reducing Kits (IP

RK20-08-CA

RK25-12-CA

RK28-12-CA

RK28-16-CA

RK28-20-CA

RK32-20-CA

RK32-25-CA

RK32-28-CA

BUSH NC25

NC16

NC12

NC16

BUSH NC25 TO NC20 X 10PC 10

REDUCING BUSH NC28 TO NC12 X 10PC 10

REDUCING BUSH NC28 TO NC16 X 10PC 10

REDUCING BUSH NC28 TO NC20 X 10PC 10

REDUCING BUSH NC32 TO NC20 X 10PC 10

REDUCING BUSH NC32 TO NC25 X 10PC 10

REDUCING BUSH NC32 TO NC28 X 10PC 10

‘t’ pieCe

hfX redUCing

Kit

69K)

“T” pieces save time and space in the construction of wiring looms. Also featuring the unique anti vibration rings, the “T” pieces make branches from main harnesses simple and also in many instances can replace expensive junction boxes. Through the use of the simple reducing kits, any outlet can be reduced down to any smaller conduit size. The inspection hatch can be removed in order to ease routing cables through the “T” piece but this must be refitted after assembly to maintain the IP67 rating. PART NO. COndUit size paCK Qty CTP10 10 x 3 1 CTP12 12 x 3 1 CTP16 16 x 3 1 CTPB20 20 x 3 1 CTPB25 25 x 3 1 CTPB28 25 x 3 1 CTPB32 32 x 3 1

66, 67, 68, 69K) Special cap nut and sealing bush kit, designed to reduce outlets from “T” pieces, manifolds and connectors. PART NO. desCriptiOn paCK Qty RK12-08-CA REDUCING BUSH NC12 TO NC08 X 10PC 10 RK16-08-CA REDUCING BUSH NC16 TO NC08 X 10PC 10 RK16-12-CA REDUCING BUSH NC16 TO NC12 X 10PC 10

REDUCING BUSH NC20 TO NC08 X 10PC 10 RK20-12-CA REDUCING BUSH NC20 TO NC12 X 10PC 10 RK20-16-CA REDUCING BUSH NC20 TO

X 10PC 10

REDUCING BUSH NC25 TO

X 10PC 10 RK25-16-CA REDUCING

X 10PC 10 RK25-20-CA REDUCING

Complete ‘X’ Piece (IP 66, 67,

69K)

The Harnessﬂex “X” Piece exhibits all the sealing and anti-vibration features of the T Piece, and accepts the reducing kits allowing utilisation of 20, 16, 12 and 8mm conduit sizes from any of the 4 outlets. A perfect, space saving, economical

for

boxes.

‘Y’ Piece Hinged Fittings (IP 40)

“Y” pieces provide branch outlets along a conduit run. Standard applications include insertion in vehicle engine or chassis harness where complete sealing is not required. Splash proof to IP40. Sizes are available for use with conduit diameters from 8mm up to 25mm. The “Y” piece is supplied as one part and hinged along its length. They are simply applied as the final assembly item by locating onto the conduit corrugations and snapped together. The fitting offers no restriction of the conduit bore.

YPS080808 - HX 08-08-08

YPS120808 - HX 12-08-08

YPS121212 - HX 12-12-12

YPS161208 - HX 16-12-08

YPS161212 - HX 16-12-12 10

YPS161608 - HX 16-16-08 10

YPS161612 - HX 16-12-12 10

YPS201208 - HX 20-12-08 10

YPS201212 - HX 20-12-12 10

YPS201612 - HX 20-16-12 10

YPS201616 - HX 20-16-16 10

YPS202012 - HX 20-20-12 10

YPS202016 - HX 20-20-16 10

YPS252016 - HX 25-20-16 10

YPS252512 - HX 25-25-12 10

YPS252516 - HX 25-25-16 10

YPS252520 - HX 25-25-20 10

YPS252525 - HX 25-25-20 10

international protection (ip rating) and published performance specifications of Harnessflex fittings is only guaranteed by carroll australasia when used in conjunction with carroll supplied conduit.

PROTECTORS COmplete

‘X’

pieCe

68,

replacement

junction

PART NO. COndUit size paCK Qty CXP20 20 x 4 1 hinged

‘y’

pieCe

PART NO. COndUit size paCK Qty

the

the international protection (ip rating) and published performance specifications of Harnessflex fittings is only guaranteed by carroll australasia when used in conjunction with carroll supplied conduit. end Caps PART NO. type sUit COndUit NO. OF PINS paCK Qty CSCM24902 90 DEG 12 2 5 CSCM27902 90 DEG 12 2 5 sOlenOid switCh COnneCtOrs Complete Solenoid/Switch Connectors To provide a straight or 90˚ electrical connection between conduit and solenoid or switch connector with either M24 or M27 thread connection. *Includes solenoid-switch connector/connector housing/socket terminals/sealing ring and cap nut. *Connectors with NC12 outlets as standard can be reduced to NC08 with reducing kit. end Caps and end Sleeves Where conduit is not terminated with an adaptor or fi tting, end caps are used to seal the end of a conduit run when using up to fi ve separate wires. Suitable for NC10 and NC12 conduit, the end caps are supplied with either a 3 or 5 cable outlets, which are simply slit open when required. End sleeves are used to seal the end of the conduit when either single or multiple wires are used, with the addition of two nylon cable ties. PART NO. type sUit COndUit paCK Qty EK03-10 END CAP 10 & 12 10 EK05-10 END CAP 12 10 ESN12-CA END SLEEVE 12 10 ESN16-CA END SLEEVE 16 10 ESN20-CA END SLEEVE 20 10 ESN25-CA END SLEEVE 25 10 ESN32-CA END SLEEVE 32 10 manifOld Complete Manifold (IP 66, 67, 68, 69K) Similar to a “T” piece. This product can be used where two outlets are required close together from a main conduit run. Used principally on vehicle chassis harnesses where connections are required to gearbox, differentials and air drier switches etc. PART NO. COndUit size paCK Qty CMF25X12 2 x 12, 2 x 25 1 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 59

PROTECTORS PART NO. COndUit size dimensiOns mm fiXing hOle a/f COUnter size paCK Qty nC nw a b C d e f HCB08/HX 8 7.5 23 23 13 12 4 8 10 HCB12/HX 12 10 23 23 13 12 4 8 10 HCB16/HX 16 13 27 27 15 14 5 9 10 HCB20/HX 20 17 34 35 20 18 6 10 10 HCB28/HX 28 23 44 44 23 21 6 10 10 HCB32/HX 32 29 53 52 27 23 6 10 10 HCB40/HX 40 36 65 63 32 27 6 10 5 HCB50/HX 50 48 81 77 39 32 6 10 5 the international protection (ip rating) and published performance specifications of Harnessflex fittings is only guaranteed by carroll australasia when used in conjunction with carroll supplied conduit. harnessfleX COndUit Clip B A D E F C Conduit Clip - Hinged Carroll’s new hinged conduit mounting clip is designed to save time and improve Harnessfl ex conduit serviceability. The low profi le design is space saving and results in a more aesthetically pleasing fi nish. Harnessflex Conduit Clip COndUit p Clip Conduit P Clip A one screw fixing P shaped clip for secure conduit mounting. Available in either heavy duty Nylon 6/6 or steel with PVC insert (steel/stainless steel PVC in the Bundling section of the catalogue). PART NO. sUit COndUit paCK Qty RP12 10 10 RP13 12 10 RP16 16 10 RP22 20 10 RP25 25 10 Check out our other range of Nylon P Clips in the CABLE MANAGEMENT section on page 66!

PART NO. type COlOUr amp rating paCK Qty AF3 STANDARD VIOLET 3 50 AF5 STANDARD TAN 5 50 AF7.5 STANDARD BROWN 7.5 50 AF10 STANDARD RED 10 50 AF15 STANDARD BLUE 15 50 AF20 STANDARD YELLOW 20 50 AF25 STANDARD CLEAR 25 50 AF30 STANDARD GREEN 30 50 MAF3 MINI VIOLET 3 50 MAF5 MINI TAN 5 50 MAF7.5 MINI BROWN 7.5 50 MAF10 MINI RED 10 50 MAF15 MINI BLUE 15 50 MAF20 MINI YELLOW 20 50 MAF25 MINI CLEAR 25 50 MAF30 MINI GREEN 30 50 QLMAF5 LOW PROFILE MINI TAN 5 50 QLMAF7.5 LOW PROFILE MINI BROWN 7.5 50 QLMAF10 LOW PROFILE MINI RED 10 50 QLMAF15 LOW PROFILE MINI BLUE 15 50 QLMAF20 LOW PROFILE MINI YELLOW 20 50 QLMAF25 LOW PROFILE MINI CLEAR 25 50 QLMAF30 LOW PROFILE MINI GREEN 30 50 BFX20 MAXI YELLOW 20 5 BFX30 MAXI LIGHT GREEN 30 5 BFX40 MAXI ORANGE 40 5 BFX50 MAXI RED 50 5 BFX60 MAXI LIGHT BLUE 60 5 BFX80 MAXI CLEAR 80 5 BFX100 MAXI VIOLET 100 5 fUses & fUse hOlders Wedge or Blade Fuses: Standard, mini, low profile mini and maxi standard blade fUse 5.10mm D 18.96mmW 18.72mmL maXi blade fUse 3.92mm D lOw prOfile mini blade fUse mini blade fUse 4.10mm D 11.06mmW 16.00mmL gOt a shOrt fUse? CHeCK OuT OuR WIde RANGe OF FuSe HOldeRS. quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 61

PROTECTORS PART NO. NO. OF CirCUits fUse type nOtes paCK Qty CFH 1 6AC IN LINE, CLIP LOCK 10 Fuse Holders - Ceramic bfmh Qtbfh bfh bfh bfhX412 BFHX812 PART NO. NO. OF CirCUits fUse type size nOtes paCK Qty BFMH 1 BLADE MINI IN LINE, WITH CAP & WIRE 10 SBFH 1 BLADE STANDARD IN LINE APPLICATION 5 QTBFH 1 BLADE STANDARD QUIKTAP IN LINE 25 BFH 1 BLADE STANDARD IN LINE, WITH CAP & WIRE 10 BFHW 1 BLADE STANDARD IN LINE, WATERPROOF WITH WIRE 10 WSBFH 1 BLADE STANDARD WATERPROOF, WITH MOUNTING CAP 5 BFK 4 BLADE STANDARD STACKABLE WITH MOUNTING HOLES 1 BFHX812 1 BLADE MAXI IN LINE 60AMP, WITH WIRE 1 BFHX412 1 BLADE MAXI IN LINE 100AMP, WITH WIRE 1 Fuse Holders - Blade or Wedge Note: Components also sold separately for BFK, SBFH and WSBFH. PART NO. NO. OF CirCUits fUse type nOtes paCK Qty FH10 1 3AG IN LINE, WITH CRIMP CONTACTS 10 BGF 1 3AG IN LINE, BAKELITE WITH WIRE 10 GFHLD 1 3AG IN LINE, WITH WIRE 10 WGFH 1 3AG IN LINE, WATERPROOF 10 PFH3AG 1 3AG PANEL MOUNT, SOLDER TAGS 5 Fuse Holders - Glass fh10 bgf gfhld wgfh Cfhpfh3ag

PART NO. fUse type size nOtes paCK Qty ACTILR BLADE STANDARD FIT TO FUSE INSERT FUSE IN FUSEHOLDER 100 Blade Fuse Power Take Off blade fUse pOwer taKe Off PART NO. desCriptiOn paCK Qty 12004943 HOUSING 50 12020321L TERMINAL 100 12004568L 4 GANG TERMINAL 10 BFK Components PART NO. desCriptiOn paCK Qty 12010105 HOUSING 50 12020321L TERMINAL 100 sbfh Components PART NO. desCriptiOn paCK Qty 12033769 HOUSING 50 12033731 COVER 50 12033997L TERMINAL 100 WSBFH Components sbfh wsbfh bfK SAFeTY FIRST MINdSeT. CONTACT uS FOR MORe INFORMATION ON eleCTRICAl COMPONeNTS. quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au 63

PROTECTORS PART NO. amperes paCK Qty CB10A 10 10 CB15A 15 10 CB20A 20 10 CB25A 25 10 CB30A 30 10 CB40A 40 10 CB50A 50 10 aUtO & manUal reset CirCUit breaKers Auto Reset Circuit Breakers Heavy duty, universal, cycles or continuously resets until the overload situation is corrected. Metal housing supplied with integral metal mounting bracket. Designed for 6-24 volt DC. aUtO reset CirCUit breaKers PART NO. reset bUttOn ampres inpUt VOltage paCK Qty MRCB10A BLACK 10A 250VAC/50VDC 10 MRCB30A BLACK 30A 250VAC/50VDC 10 MRCB40A BLACK 40A 250VAC/50VDC 10 WMRCB10A WHITE 10A 250VAC/32VDC 10 WMRCB15A WHITE 20A 250VAC/32VDC 10 WMRCB20A WHITE 20A 250VAC/32VDC 10 WMRCB25A WHITE 25A 250VAC/32VDC 10 WMRCB30A WHITE 30A 250VAC/32VDC 10 Manual Reset Circuit Breakers Thermal Type Circuit Breaker. Dash or panel mount, supplied complete with metal, knurled top locking nut and hex back nut, black nameplate with ‘Press to Reset’ instructions. Mounting hole: 10mm (Black reset) and 9.5mm (White reset). Standard 6.3mm (1/4”) quick connect tab terminals. manUal reset CirCUit breaKers PART NO. amperes paCK Qty CBP20A 20 10 CBP30A 30 10 CBP40A 40 10 CBP50A 50 10 Plastic Circuit Breakers plastiC CirCUit breaKers diOdes PART NO. prOdUCt desCriptiOn paCK Qty 1ADIODE DIODE 1 AMP 100 3ADIODE DIODE 3 AMP 10 6ADIODE DIODE 6 AMP 10 diodes

Carroll’s carefully selected range of Trafalgar First Aid kits and supplies are designed specifically for the mining and electrical industries. The specific range of first aid kits are comprehensively equipped to help ensure a range of injuries can be addressed. Carroll also stocks industry-leading lifepak products to ensure workplaces are ready for a heart emergency. phOne 1800 777 458 web carroll.com.au/first-aid.html email sales@carroll.com.au CarrOll first aid brOChUreprOdUCtreQUesta tOday! CARROLL 1800 777 458 sales@carroll.com.au H W R NG ACCES ORY SPEC AL ST QUAL TY S ANDARD SERV CE GUARANTEE EXCEPTIONAL CUSTOMER SERVICE REL ABLE D VERSE RANG carroll.com.au PRODUCT GUIDE FIRST AID LOCKOUT TAGOUT

Cable management pVC spaghetti tUbing 78 spirOll Cable wrapping 75 Cable ties & aCCessOries 67 slOtted wiring dUCt 78 QUiCKfleX braided sleeVing 75 Cable Clamps 73 din rail Channel 79 split lOOm tUbe 76

CarrOll Cable ties & aCCessOries

Carroll cable ties and accessories are manufactured with high quality, high-tech and computer-controlled injection and extrusion machines available today.

Carroll currently offer hundreds of cable ties and accessories whose quality has been approved by UL, CSA, VDE, DNV, GL, LLOYD, CE, ABS, IP68 etc.

For long life and dependable service, there are many factors to consider when selecting the appropriate cable tie for the application. There are also various environmental conditions (such as weathering, flammability, chemical, radiation, moisture and Carroll extremes), that will have detrimental effects on specific cable tie materials. Carroll offers a wide selection of cable tie designs, styles and materials. With cable ties available in lengths from 100mm to 1168mm, tensile strengths exceeding 110 kilos, identification marker ties, screw and push mount ties, we have a design and style to meet your specific application needs. Precision manufactured from UL approved nylon 6/6 with a flammability rating of UL94V-2, the nylon cable ties are tested under NATA Laboratory No. 987 & 1748 to meet or exceed the tensile strength requirements of MIL-S-23190D. For every cable tie, there is a Quikcrimper installation tool available to provide a fast, dependable method of application.

Materials:

1. Natural Nylon 6/6

Primarily used for indoor applications. Life expectancy in ultraviolet light, (sunlight), is one to two years*. The normal operating temperature range of nylon 6/6 is -10°C to 85°C.

2. Black Weather Resistant Nylon 6/6

Primarily used in outdoor applications. Over a period of time, ultraviolet light attacks most plastic materials and reduces their properties by breaking down the molecular chain. A uniform dispersion of 2% carbon black provides UV resistance and increases the cable tie life expectancy to 7–9 years*.

3. Stainless Steel

Primarily used in petro-chemical, marine, severe hostile environments, flame-proof installations and applications of long term external exposure or weathering where a life expectancy of >20 years can be expected. Stainless Steel tie operating temperatures: Uncoated (Standard) from -60°C to 300°C and Coated (Black) from -80°C to 150°C.

* This is based on the assumption of minimum loading, no chemical attack and impact free conditions.

67quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au lOw smOKe halOgen free asCend Vydyne nylOn 6/6 material UV resistanCe 7 years OUtdOOrs (BlACK TIeS ONlY) rOhs COmpliant

BUNDLING light dUty nylOn Cable ties light duty Nylon Ties CABLE MANAGEMENT PART NO. COlOUr length (MM) width (mm) MAX. bUndle Ø (mm) MIN. lOOP tensile strength (KG) paCK Qty CT102B UV BLACK 100 2.5 22 8 100 CT102B/1000 UV BLACK 100 2.5 22 8 1000 CT200LB UV BLACK 200 2.5 55 8 100 CT102 NATURAL 100 2.5 22 8 100 CT102/1000 NATURAL 100 2.5 22 8 1000 CT200L NATURAL 200 2.5 55 8 100 standard dUty nylOn Cable ties Standard duty Nylon Ties PART NO. COlOUr length (MM) width (mm) MAX. bUndle Ø (mm) MIN. lOOP tensile strength (KG) paCK Qty CT194B UV BLACK 200 4.8 52 22 100 CT280B UV BLACK 300 4.8 83 22 100 CT370B UV BLACK 385 4.8 110 22 100 CT432B UV BLACK 432 4.8 125 22 100 CT194 NATURAL 200 4.8 52 22 100 CT280 NATURAL 300 4.8 83 22 100 CT370 NATURAL 385 4.8 110 22 100 CT432 NATURAL 432 4.8 125 22 100 Intermediate duty Nylon Ties PART NO. COlOUr length (MM) width (mm) MAX. bUndle Ø (mm) MIN. lOOP tensile strength (KG) paCK Qty CT143B UV BLACK 150 3.6 35 18 100 CT200MB UV BLACK 200 3.6 50 18 100 CT292B UV BLACK 300 3.6 83 18 100 CT370MB UV BLACK 370 3.6 102 18 100 CT143 NATURAL 150 3.6 35 18 100 CT200M NATURAL 200 3.6 50 18 100 CT292 NATURAL 300 3.6 83 18 100 intermediate dUty nylOn Cable ties 8KG 18KG 22Kg

69quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au Keep things tOgether with CarrOll’s Cable tie range dOn’t leaVe hOme WITHOuT THeM. PART NO. COlOUr length (MM) width (mm) MAX. bUndle Ø (mm) MIN. lOOP tensile strength (KG) paCK Qty CT300B UV BLACK 300 7.6 88 55 100 CT373B UV BLACK 380 7.6 110 55 100 CT550B UV BLACK 550 7.6 166 55 100 CT550HB UV BLACK 550 13 166 114 100 CT838B UV BLACK 812 9.0 246 80 100 CT1168B UV BLACK 1168 9.0 360 80 100 CT373 NATURAL 380 7.6 110 55 100 CT550 NATURAL 550 7.6 166 55 100 CT838 NATURAL 812 9.0 246 80 100 CT1168 NATURAL 1168 9.0 360 80 100 Heavy duty Nylon Ties heaVy dUty nylOn ties >55Kg sCrew mOUnt nylOn ties Screw Mount Cable Ties PART NO. COlOUr length (MM) width (mm) MAX. bUndle Ø (mm) MIN. lOOP tensile strength (KG) paCK Qty SM194B UV BLACK 204 4.2 60 22 100 PART NO. COlOUr length (MM) width (mm) MAX. bUndle Ø (mm) MIN. lOOP tensile strength (KG) paCK Qty CT373GHS LIGHT GREEN 380 7.6 110 55 100 Heat Stabilised Cable Ties Heat stabilised Nylon 6/6, primarily used in indoor applications. Normal operating temperature -40°C to +105°C

CABLE MANAGEMENT pUsh mOUnt nylOn ties hOse Clamp nylOn ties PART NO. COlOUr length X width mm bUndle Ø mm tensile strength (KG) paCK Qty QHT194B UV BLACK 200 x 4.8 55 100 100 Hose Clamp Cable Ties Designed to provide complete 360 circumferential compression. Applications include fuel lines, irrigation and plumbing ﬂ exible hoses and pipes, air lines etc. (Can replace OE No. 54-816311T) Recommended for use with Hypalon ® * and other soft surface fuel hosing. *Registered trademark DuPont Push Mount Cable Ties PART NO. COlOUr length (MM) width (mm) MAX. bUndle Ø (mm) paCK Qty PM143B UV BLACK 155 3.6 40 100 PM143 NATURAL 155 3.6 40 100 releasable nylOn ties Heavy duty Releasable Nylon Ties PART NO. COlOUr length X width mm bUndle Ø mm paCK Qty RT300B UV BLACK 300 x 8.0 80 100 FIG 1. FIG 2. Identification Nylon Ties PART NO. prOdUCt length (MM) width (mm) MAX. bUndle Ø (mm) paCK Qty IT110 FIG 1. 110 2.5 25 100 IT194 FIG 2. 200 4.6 50 100 Screw and Push Mount Tie Bases PART NO. type length mm maX tie width mm paCK Qty CTA4 1 19 4 100 CTS 2 15 5 100 CTS/B 2 15 5 100 CTHD 2 23 9 100 CTHD/B 2 23 9 100 sCrew and pUsh mOUnt tie bases

71 Adhesive Mounting Bases PART NO. COlOUr length X width mm maX tie width mm paCK Qty AMB19 NATURAL 19 x 19 4.7 100 AMB19B BLACK 19 x 19 4.7 100 AMB25 NATURAL 28 x 28 5.0 100 AMB25B BLACK 28 x 28 5.0 100 mOUnting bases Stainless Steel Cable Ties - Standard duty PART NO. steel grade length X width mm bUndle Ø mm tensile strength (KG) paCK Qty SSCT200/316 316 201 x 4.6 50 44.5 100 SSCT360/316 316 360 x 4.6 100 44.5 100 SSCT520/316 316 520 x 4.6 150 44.5 100 stainless steel Cable ties heaVy dUty stainless steel Cable ties Coated Stainless Steel Cable Ties - Standard duty PART NO. steel grade length X width mm bUndle Ø mm tensile strength (KG) paCK Qty SSCT200/316P 316 201 x 4.6 50 44.5 100 SSCT360/316P 316 360 x 4.6 100 44.5 100 COated stainless steel Cable ties quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au Stainless Steel Cable Ties - Heavy duty PART NO. standard grade length X width mm bUndle Ø mm tensile strength (KG) paCK Qty SSCT200HD/316 316 201 x 7.9 50 111.2 50 SSCT360HD/316 316 360 x 7.9 100 111.2 50 SSCT520HD/316 316 520 x 7.9 150 111.2 50 SSCT1200HD/316-10 316 1200 x 7.9 289 111.2 10

CABLE MANAGEMENT hOOK and lOOp strapping PART NO. COlOUr length X width mm bUndle Ø mm rOll length V12-2280 BLACK 22.8 x 12 VARIABLE 22.8m V25-2280 BLACK 22.8 x 25 VARIABLE 22.8m Hook and loop Strapping Back to back hook and loop velcro strap. Infi nitely adjustable to any size, the user simply wraps the strapping around the objects to be held and cuts to length. Eliminates the potential for damage to fi bre optics or cables caused by possible over-cinching or accidental cutting. PART NO. COlOUr length X width mm bUndle Ø mm rOll length CT194BL BLUE 200 x 4.8 52 100 CT194G GREEN 200 x 4.8 52 100 CT194P PURPLE 200 x 4.8 52 100 CT194R RED 200 x 4.8 52 100 CT194Y YELLOW 200 x 4.8 52 100 Coloured Cable Tie Canister paCKs Coloured Canister Packs PART NO. COlOUr size mm paCK Qty CP300 MIXED 300 x 102 & 200 300 CP1000 MIXED 1000 x 102 1000 *Colours may vary to those depicted Mixed Cable Tie Packs PART NO. COlOUr SIZe (MM) paCK Qty CT1000 UV BLACK PACK CONTAINS: 200 ties x Length: 100mm, 143mm and 280mm sizes 400 ties x Length: 194mm 1000 22Kg

73 Christmas Tree Plug PART NO. COlOUr maX tie width mm mOUnting hOle mm mOUnting depth mm paCK Qty CTP6 BLACK 9 6 24.7 100 CTP9 BLACK 9 9 37.5 100 masOnry Christmas Cable Clip nylOn Cable Clamps metal / rUbber Cable Clamps adhesiVe ribbOn Cable Clip PART NO. COlOUr length X width mm bUndle Ø mm rOll length FC25 GREY 25 x 25 25 100 Adhesive Ribbon Cable Clip PART NO. COlOUr bUndle mm bUndle Ø mm paCK Qty UC0B BLACK 3.2 1/8 100 UC0.5 NATURAL 4.8 3/16 100 UC0.5B BLACK 4.8 3/16 100 UC1 NATURAL 6.35 1/4 100 UC1B BLACK 6.35 1/4 100 UC1.5B BLACK 7.9 5/16 100 UC2B BLACK 9.5 3/8 100 UC3B BLACK 12.7 1/2 100 UC4B BLACK 15.8 5/8 100 UC5B BLACK 19.4 3/4 100 UC6B BLACK 25.4 1 100 UC7B BLACK 31.8 11/4 100 UC9B BLACK 36.7 11/2 100 PART NO. bUndle mm width mm mOUnting hOle mm paCK Qty PS1 10 16 7 10 PS2 13 16 7 10 PS3 16 16 7 10 PS4 19 16 7 10 PS5 22 16 7 10 PS6 27 16 7 10 PS7 32 16 7 10 PS8 35 16 7 10 PS9 40 16 7 10 Cable Clamps & saddles Nylon Cable Clamp Metal / Rubber Cable Clamps (Mild Steel) quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

316

CABLE MANAGEMENT stainless steel rUbber Cable Clamps

girder

Clips

Stainless Steel Cable Clamps Heavy Duty clamp manufactured from 316 Grade Stainless Steel and E.P.D.M. (Ethylene Propylene Diene Monomer) rubber formulation. The combination of 316 stainless steel and E.P.D.M. rubber makes the clamps suitable for many hostile environments including outdoor and marine. Specifically designed for use in high NVH applications. PART NO. bUndle mm width mm mOUnting hOle mm paCK Qty SSPC10 10 16 7 10 SSPC10/50 10 16 7 50 SSPC13 13 16 7 10 SSPC13/50 13 16 7 50 SSPC16 16 16 7 10 SSPC16/50 16 16 7 50 SSPC19 19 16 7 10 SSPC19/50 19 16 7 50 SSPC25 25 16 7 10 SSPC25/50 25 16 7 50 SSPC29 29 16 7 10 SSPC29/50 29 16 7 50 SSPC32 32 16 7 10 SSPC32/50 32 16 7 50 SSPC38 38 16 7 10 SSPC38/50 38 16 7 50 SSPC44 44 16 7 10 SSPC44/50 44 16 7 50 SSPC55 55 16 7 10 Girder Clips Carroll Girder Clips are made from high quality spring steel that are treated via a zinc electroplating process. PART NO. fits size mm material thiCKness mm paCK Qty CGC1 8–13 0.7 100 CGC2 16–20 0.8 100 CGC3 25–32 1.0 100

spirOll

75 spirOll wrapping band

Cable wrapping Spiroll, spiral wrapping band is designed to bind and protect hoses, wires and cables in harnesses and wiring looms. Manufactured from either natural or black polyethylene, the material exhibits excellent electrical, abrasive and binding strength. Spiroll’s flexible construction enables the easy routing of wiring looms. Due to the material’s durability, the product is re-useable and has almost unlimited expansion. Depending on roll size and diameter, Spiroll is either supplied in specially designed dispenser boxes or plastic bag. PART NO. bUndle range mm COlOUr id mm length mm CTC3N 4–12 NATURAL 4 50 CTC3B 4–12 BLACK 4 50 CTC6N 6–50 NATURAL 6 50 CTC6B 6–50 BLACK 6 50 CTC12N 12–100 NATURAL 9 25 CTC12B 12–100 BLACK 9 25 CTC3N/10 4–12 NATURAL 4 10 CTC3B/10 4–12 BLACK 4 10 CTC6N/10 6–50 NATURAL 6 10 CTC6B/10 6–50 BLACK 6 10 CTC12N/10 12–100 NATURAL 9 10 CTC12B/10 12–100 BLACK 9 10 CTC19N/10 15–100 NATURAL 15 10 CTC19B/10 15–100 BLACK 15 10 CTC24N 20–130 NATURAL 20 10 CTC24B 20–130 BLACK 20 10 QUiKfleX QUiKfleX sleeVing Quikflex braided (or woven) sleeving from Carroll is a black, flexible, expanding harness medium, made from single filament polyester. The woven construction allows Quikflex to expand in diameter considerably to firmly harness wire lengths. Wires can also be poked through the sleeving, to enable harness breakouts. PART NO. diameter mm minimUm maXimUm length mm QF3BK 3 1 6 100 QF6BK 6 3 9 100 QF10BK 10 7 19 100 QF13BK 13 8 24 100 QF19BK 19 14 30 100 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

split lOOm tUbe - FlAMe ReTARdANT

Carroll’s Quikcrimp loom tube is a split corrugated conduit designed for quick, neat, cost effective wire harnessing solution to consolidate loose wires into a wire loom, and protect them from damage caused from abrasion, heat and harsh environments.

It is also Flame Retardant using a halogenated ﬂ ame retardant system to UL94 V2 rating. Also available with an enhanced UV stabilisation package, suitable for outdoor applications on request.

Australian manufactured, corrugated polypropylene tubing designed for cost-effective

exible protection in a wide range of automotive, marine and industrial applications.

Features:

•

automotive

a high impact

solvents

CABLE MANAGEMENT

ﬂ

Excellent chemical resistant to

oils, ﬂ uids and

Extremely tough and durable, using

copolymer polypropylene for enhance impact resistance

Operating temperature range from -20°C to 90°C

ROHS compliant SPlIT lOOM TuBe - FlAMe ReTARdANT. IT’S THe QuICK, NeAT & COst effeCtiVe sOlUtiOn fOr all eNVIRONMeNTS.

LT5/100M

LT7/10M

LT7/50M

LT10/10M

LT10/30M

LT10/50M

LT10/100M

LT10/250M

LT13/10M

LT13/30M

LT13/50M

LT13/150M

LT16/10M

LT16/30M

LT16/100M

LT20/10M

77 lOOm tUbe PART NO. id mm Od mm COlOUr length m

5.0 8.0 BLACK 100

7.0 10.4 BLACK 10 LT7/25M 7.0 10.4 BLACK 25

7.0 10.4 BLACK 50 LT7/100M 7.0 10.4 BLACK 100 LT7/400M 7.0 10.4 BLACK 400

9.7 12.8 BLACK 10

9.7 12.8 BLACK 30

9.7 12.8 BLACK 50

9.7 12.8 BLACK 100

9.7 12.8 BLACK 250

12.6 15.7 BLACK 10

12.6 15.7 BLACK 30

12.6 15.7 BLACK 50

12.6 15.7 BLACK 150

16.3 20.9 BLACK 10

16.3 20.9 BLACK 30 LT16/50M 16.3 20.9 BLACK 50

16.3 20.9 BLACK 100

21.1 25.2 BLACK 10 LT20/30M 21.1 25.2 BLACK 30 LT20/50M 21.1 25.2 BLACK 50 LT20/100M 21.1 25.2 BLACK 100 LT23/50M 23.0 27.0 BLACK 50 LT25/10M 29.0 33.0 BLACK 10 LT25/30M 29.0 33.0 BLACK 30 LT25/50M 29.0 33.0 BLACK 50 LT36/25M 36.0 42.0 BLACK 25 LT48/25M 48.0 54.0 BLACK 25 lOOm tUbe installatiOn tOOl loom Tube Installation Tool PART NO. desCriptiOn paCK Qty LTIT ECONOMICAL, FAST AND SIMPLE TO USE TOOL 1 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au Split Tubing

CABLE MANAGEMENT PART NO. id mm COlOUr length mm PVC4 4 BLACK 50m PVC5 5 BLACK 50 PVC6 6 BLACK 50 PVC7 7 BLACK 50 PVC8 8 BLACK 50 PVC10 10 BLACK 25 PVC12 12 BLACK 25 PVC16 16 BLACK 25 PVC19 19 BLACK 25 pVC spaghetti tUbing PVC tubing has multiple uses including sleeving for wire harnessing and looms. slOtted wiring dUCt single sCOred Carroll offer the widest range of slotted wiring duct to suit all applications. Approved to both UL and CSA standards, Carroll ducting meets all customer requirements for quality, range and value for money. Features: • Pre-scored lines allow quick and easy removal of wall fingers to increase slot size • 10mm wide fingers with 8mm spacing • Material: High impact, warp-proof PVC, self-extinguishing, UL approved 94V-0

pVC spaghetti tUbing

slOtted dUCt PART NO. width X height mm length mm COlOUr paCK Qty SD2525 25 x 25 2 GREY 12 SD2530 25 x 30 2 GREY 12 SD2540 25 x 40 2 GREY 12 SD2550 25 x 50 2 GREY 12 SD2560 25 x 60 2 GREY 12 SD2575 25 x 75 2 GREY 12 SD4040 40 x 40 2 GREY 12 SD4060 40 x 60 2 GREY 12 SD4080 40 x 80 2 GREY 12 SD5050 50 x 50 2 GREY 12 SD5075 50 x 75 2 GREY 12 SD6040 60 x 40 2 GREY 12 SD6060 60 x 60 2 GREY 12 SD6080 60 x 80 2 GREY 12 SD7575 75 x 75 2 GREY 8 SD8060 80 x 60 2 GREY 8 SD8080 80 x 80 2 GREY 8 SD100100 100 x 100 2 GREY 8 SD10060 100 x 60 2 GREY 8

79 PART NO. a mm b mm length m steel thiCKness mm paCK Qty DIN3515S 35 15 2 1.5 10 DIN3575S 35 7.5 2 1 10 din rail Channel Our selection of Din Rail Channels strengthens our offering to allow greater choice for the customer when selecting their desired cable or wire cradling method. The Carroll range is manufactured from quality cold rolled steel and is fi nished with a zinc electro plating and a yellow passivation finish. din rail din 3515s din 3575s PART NO. width mm length mm COlOUr paCK Qty SDLID25 25 2 GREY 1 SDLID40 40 2 GREY 1 SDLID50 50 2 GREY 1 SDLID60 60 2 GREY 1 SDLID70 70 2 GREY 1 SDLID75 75 2 GREY 1 SDLID80 80 2 GREY 1 SDLID100 100 2 GREY 1 Slotted Wiring duct Replacement lids CARROll’S SlOTTed WIRING duCT. we Can Keep YOu ON TRACK. quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

COnneCtOrs strip terminal blOCKs fUel inJeCtOr regUlatOr COnneCtOrs 94 92 switChes MulTI PIN CONNeCTORS - Ql SeRIeS relays MulTI PIN CONNeCTORS - QK SeRIeS MulTI PIN CONNeCTORS - 6007 SeRIeS 93 86 93 84 82 mini alligatOr Clips temperatUre sender COnneCtOr 95 92 sCrew COnneCtOrs weather paCK series COnneCtOrs 94 88 sy series COnneCtOrs headlight COnneCtOr relay base COnneCtOr 95 92 93

designing a harness? harnessfleX® prOViding sUperiOr prOteCtiOn FOR AuTOMOTIVe WIRING HARNeSSeS. Contact us today to discuss with our Harnessflex experts on how we can improve the reliability and performance of the electrical wiring harness so your vehicle and business stays up and running when you need it. 81quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

mUlti pin COnneCtOrs

series

CONNECTORS

6007

There are many special features of the 6007 connector series that exceed standard connector design practices. Rated at up to 300V AC/DC, these compact connectors will withstand 1,500V AC/minute, and operate within a temperature range of -25˚C to 105˚C. Polarised to ensure correct mating, a positive locking latch also automatically engages at mating, and the option exists for in line or hand fitted panel mounted installation. The complete cell housing system fully covers and protects the contacts. The high reliability 2mm O.D. crimp contacts, are easily snapped into the housings by hand, with two sizes covering a wide wire range from 0.2 to 2.0mm². Maximum contact resistance is limited to 10 ohm. 6007rh02 6007ph02 2 300V 15A 6007rh03 6007ph03 3 300V 14A 6007rh04 6007ph04 4 300V 13A 6007rh06 6007ph06 6 300V 12A 6007rh12 6007ph12 12 300V 9A pOles VOltage rating CUrrent rating reCeptaCle hOUsing fOr pin COntaCt plUg hOUsing fOr sOCKet COntaCt

83 CARROll’S MulTI PIN CONNeCTORS. get COnneCted WITH CARROll. Contact - Pins PART NO. pin PART NO. sOCKet wire mm2 wire awg paCK Qty 7005LT1 7006LT1 0.5–2.0 20–14 100 7005LT2 7006LT2 0.2–0.5 24–20 100 Complete 6007 Series Connectors Complete connectors consist of both housings and sufficient contacts to build a connector. PART NO. reCept pOles rating aC VOltage CUrrent amps paCK Qty 6007-1 1 600 15 1 set 6007-2 2 300 15 1 set 6007-3 3 300 14 1 set 6007-4 4 300 13 1 set 6007-6 6 300 12 1 set 6007-9 9 300 10 1 set 6007-12 12 300 9 1 set 6007-15 15 300 9 1 set Housings PART NO. reCept PART NO. plUg pOles CUrrent rating aC paCK Qty 6007RH02 6007PH02 2 15 50 6007RH03 6007PH03 3 14 50 6007RH04 6007PH04 4 13 50 6007RH06 6007PH06 6 12 50 6007RH12 6007PH12 12 9 50 6007-12 6007-2 6007-4 6007-9 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

mUlti pin COnneCtOrs

series

connectors conform to the common 250 series, 6.0mm (J.A.S.O.) and 6.3mm (European standards. All connectors are polarised to prevent incorrect mating. A positive locking latch automatically engages at mating for connectors with an ”L” suffix. Housings with a “T” suffix also feature panel mounting tabs. Latch type housings and non-latch housings can be mated if required. The tin plated crimp contacts, are easily snapped into the housings by hand. Two sizes cover a wide wire range from 0.8 to 3.0mm².

CONNECTORS

These

QK1a QK1b QK1asl QK1bsl 1 10 QK2a QK2b QK2asl QK2bsl 2 10 QK3al QK3bl QK3asl QK3bsl 3 10 QK4al QK4blt* QK4asl QK4bsl 4 10 QK6al QK6blt* QK6asl QK6bsl 6 10 QK8Al QK8BlT QK8ASl QK8BSl 8 10 CirCUits standard standard reVerse reVerse paCK Qty *These housings can be screw panel mounted via their mounting ear feature. note: the plug housing is also referred to as the female housing, as it accepts the female terminal. the receptacle housing is also referred to as the male housing, as it accepts the male tab terminal.

85 QK Connector Contacts - Receptacles PART NO. reCept wire mm2 material finish paCK Qty 604502BL2 0.8–1.5 BRASS TIN 100 604501BL2 1.5–3.0 BRASS TIN 100 605001BL2* 0.8–1.3 BRASS TIN 100 QK Connector Contacts - Tabs PART NO. reCept wire mm2 material finish paCK Qty 605502BL2 0.8–1.5 BRASS TIN 100 605501BL2 1.5–3.0 BRASS TIN 100 Complete QK Series Connectors Complete connectors consist of both housings and suffi cient contacts to build a connector. PART NO. pOles latCh paCK Qty QK1 1 YES 1 QK2 2 NO 1 QK3 3 YES 1 QK4 4 YES 1 QK6 6 YES 1 QK8 8 YES 1 CONTACT - ReCePTACle CONTACT - TABS *This terminal is required and suits QK1BSL housing only. QK Connector Housing PART NO. reCept PART NO. PluG pOles latCh paCK Qty QK1ASL QK1BSL 1 YES 10 QK1A QK1B 1 NO 10 QK2A QK2B 2 NO 10 QK2ASL QK2BSL 2 YES 10 QK3AL QK3BL 3 YES 10 QK3ASL QK3BSL 3 YES 10 QK4AL QK4BLT* 4 YES 10 QK4ASL QK4BSL 4 YES 10 QK6AL QK6BLT* 6 YES 10 QK6ASL QK6BSL 6 YES 10 QK8AL QK8BLT* 8 YES 10 QK8ASL QK8BSL 8 YES 10 *These housings can be screw panel mounted via their mounting ear feature. quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

CONNECTORS Contacts - Receptacles PART NO. reCept wire mm2 material finish paCK Qty 66047BL2 1.3–2.0 BRASS TIN 100 CONTACT - ReCePTACle Contacts - Tabs PART NO. reCept wire mm2 material finish paCK Qty 66057BL2 1.3–2.0 COMPOSITE TIN 100 605702BL0 0.8–1.3 COMPOSITE TIN 100 CONTACT - TABS mUlti pin COnneCtOrs Ql series These .312 (or 8mm) Series connectors are polarised to prevent incorrect mating. A positive locking latch automatically engages at mating for the single circuit connector. The standard connector used in fusable links. The tin plated crimp contacts, are easily snapped into the housings by hand. Applicable terminal wire range is 1.3 to 2.0mm². note: the plug housing is also referred to as the female housing, as it accepts the female terminal. the receptacle housing is also referred to as the male housing, as it accepts the male tab terminal. Ql1a Ql1b Ql2a Ql2b reCeptaCle hOUsing fOr male COntaCt plUg hOUsing fOr female COntaCt

87 Housings PART NO. reCept pOles latCh COnneCtOr length mm paCK Qty QL1A 1 YES 30 10 QL2A 2 YES 34 10 PART NO. tab pOles latCh COnneCtOr length mm paCK Qty QL1B 1 YES 34 10 QL2B 2 YES 30 10 CONTACT - ReCePTACle Complete Ql Series Connectors Complete connectors consist of both housings and suffi cient contacts to build a connector. PART NO. pOles latCh paCK Qty QL1 1 YES 1 QL2 2 NO 1 AMP Connectors - Faston Connectors Similar type connector range to the QK Series using .250 tab and receptacle terminals. This connector is common on equipment manufactured in Europe and USA. (eg: buses, trucks, vending equipment.) QK1A (180916) QK1B (180905) 1 10 180924 180923 2 50 180901 180900 4 50 nO Of CirCUits reCeptaCle hOUsing fOr male tab plUg hOUsing fOr female tab paCK Qty CONTACT - TABS quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

paCK series

CONNeCTORS

are made for signal level circuits in harsh environmental conditions where even a small degradation in the connection may be critical. Special

to withstand conditions of extreme temperature, moisture and even submersion.

and seals are used to allow the

employs a pin and sleeve-type

The pin can ﬂex outward to maintain contact with the sleeve

is therefore called a ﬂexpin.

has a laplock to reduce relaxation. Rated at up to 20 amps DC, the housings incorporate a positive locking latch and a secondary

on the contacts. The one (1) to six (6) circuit housings are designed to be used in line or mounted by insertion of a Weather Pack mounting clip. The twenty-two (22)

is designed to be bulkhead mounted. Male plugs mate with male pins.

see the next page

speciﬁcations.

CONNECTORS Contacts - Receptacles Contacts - Tabs Housings CONTACT - ReCePTACle CONTACT - TABS PART NO. reCept wire mm2 material finish paCK Qty 42238-1 0.8–2.0 BRASS NONE 500 PART NO. reCept wire mm2 material finish paCK Qty 42241-1 0.8–2.0 BRASS NONE 250 PART NO. ReCePT pOles paCK Qty 180924 2 50 180901 4 50 180906 6 50 280430 8 50 PART NO. PluG pOles paCK Qty 180923 2 50 180900 4 50 180904 6 50 163007-0 18 50 weather

- SeAled

Weather Pack connectors

materials

connector

The connector

terminal.

and

The sleeve

lock

circuit connector

please

for technical

89 *Both plugs each require 2 secondary locks, part number 12010852. 12015791 12010966 1 10 12015792 12010973 2 50 12015793 12010717 3 50 12015797 12010974 4 50 12015798 12015024 4 50 12034342 12065158 5 50 12015799 12010975 6 50 12020991 12020005 22* 50 NO OF CIRCuITS female plUg male plUg paCK Q ty Weather Pack Housings quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

CONNECTORS Housings PART NO. ReCePT pOles type latCh paCK Qty 12015791 1 FLAT YES 50 12015792 2 FLAT YES 50 12015793 3 FLAT YES 50 12015797 4 FLAT YES 50 12015798 4 SQUARE YES 50 12034342 5 FLAT YES 50 12015799 6 FLAT YES 50 12020991 22 ROUND YES 1 12010852 SECONDARY LOCK 10 Contacts - Pins Contacts - Sockets male terminal (PIN) female terminal (SOCKeT) PART NO. PIN wire mm2 wire aUtO paCK Qty 12089040L 1 3 100 12124582L 2 4 100 12124587L 3 5 100 12089307L 0.35 100 PART NO. SOCKeT wire mm2 wire aUtO paCK Qty 12089188L 1 3 100 12124580L 2 4 100 12124581L 3 5 100 12020801L 0.35 100

91 Weather Pack Seals & Cavity Plug PART NO. wire size COlOUr material paCK Qty 12015899 1.29–2.06 RED SILICONE 100 12015323 2.03–2.80 GREEN SILICONE 100 12010293 2.81–3.49 GREY SILICONE 100 12015193 3.50–4.21 BLUE SILICONE 100 12010300 CAVITY PLUG GREEN SILICONE 100 CaVity plUg COmplete weather paCK COnneCtOrs Complete Weather Pack Connectors Complete connectors consist of both housings and sufficient contacts to build two (2) connectors. Contacts and seals supplied suit 2mm² (4–5mm auto). PART NO. pOles type paCK Qty 2C1CW 1 FLAT 2 2C2CW 2 FLAT 2 2C3CW 3 FLAT 2 2C4CIW 4 FLAT 2 2C4CSW 4 SQUARE 2 2C5CW 5 ROUND 2 2C6CW 6 FLAT 2 1C22CW 22 ROUND 1 Housings PART NO. PluG pOles type latCh paCK Qty 12010996 1 FLAT YES 50 12010973 2 FLAT YES 50 12010717 3 FLAT YES 50 12010974 4 FLAT YES 50 12015024 4 SQUARE YES 50 12065158 5 ROUND YES 50 12010975 6 FLAT YES 50 12020005 22 ROUND YES 1 12010852 SECONDARY LOCK 10 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

CONNECTORS COmplete COnneCtOr KITS - BRP1 COmplete COnneCtOr KITS - BRP3 COmplete COnneCtOr KITS - BRP4 temperatUre sender Kit PART NO. NO. OF CIRCuITS paCK Qty BRP1 2 1 BRP3 3 1 BRP4 4 1 fUel inJeCtiOn / regUlatOr COnneCtOr Two, three and four circuit housings complete with contacts and rubber boot for sealing, in convenient packaged presentation. Components are available outside of kit form in larger pack sizes. Complete Connector Kits PART NO. desCriptiOn paCK Qty TS KIT TEMPERATURE SENDER KIT 10 temperatUre sender COnneCtOr Single circuit housing with cutaway area for mounting onto sender units complete with correct terminal contact that features sprung mating nib. 10 of each terminal and housing in each kit. Components are available outside of kit form in larger pack sizes. Complete Kit PART NO. desCriptiOn paCK Qty 0-0925590 TERMINAL 100 827551-3 2 CIRCUIT PLUG 50 1280703026 2 CIRCUIT BOOT 10 1-827578-1 3 CIRCUIT PLUG 10 MT-4BV 4 CIRCUIT PLUG 10 859G547-B 3 & 4 CIRCUIT BOOT 10 Components PART NO. desCriptiOn paCK Qty 2962965 HOUSING 50 605001BL2 TERMINAL 100 Components

93 relay base COnneCtOr Packard relay base has 5 unique terminal contacts that prevent poor terminal to relay contact area connections due to vibration and fatigue. The relay base itself can be linked up together and enables itself to be mounted to firewalls etc. 1 per kit. Components are available outside of kit form in larger pack sizes. Relay Base Kit PART NO. paCK Qty PRBC 1 Relay Base Components PART NO. COntents paCK Qty 12033871 HOUSING 50 12015865L TERMINALS 100 HlK Components PART NO. COntents paCK Qty 610001BL0 TERMINALS 100 relay base KIT - PRBC headlight COnneCtOr hlK Kit PART NO. paCK Qty HLK 10 hlK relays PART NO. desCriptiOn amp rating paCK Qty REL2512 12 VOLT 5 PIN 40 10 REL2524 24 VOLT 5 PIN 20 1 rel2512 switChes PART NO. desCriptiOn amp rating mOUnting hOle mm paCK Qty 245 MOMENTARY (ON) HEAVY DUTY PUSH BUTTON, WATERPROOF 60A AT 12V 16 1 DS1 ADJUSTABLE DOOR/BONNET/ ALARM SWITCH 10A AT 12V 10 1 DS2 UNIVERSAL DOOR/ALARM, CUT TO LENGTH 10A AT 12V 10 10 switChes 245DS1 DS2 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

CONNECTORS Neutral links / earth Bars Insulated Screw Connectors The clear plastic housings of Carroll screw connectors allow easy, error free connections, for up to a maximum of 2 x 6mm² cables. sCrew COnneCtOrs Carroll offer a range of different connector types to suit your specific application needs. From one to twenty-four circuits, sealed and unsealed, in line and panel mount, AC/DC and a wide range of current ratings. PART NO. desCriptiOn paCK Qty NL06 6 WAY WITH BASE 5 NL12 12 WAY WITH BASE 5 NL18 18 WAY WITH BASE 5 PART NO. NO. OF SCReWS amp rating paCK Qty CSC1 1 32 100 CSC2 2 32 100 Terminal Block strip terminal blOCKs Carroll offers a defi ned range of German made high quality 12 way terminal strips, designed for performance in low voltage applications. • Made of flexible plastic, easy to separate • Flame retardant with high-set captive screws • Heat resistance up to approx. 80ºC • German designed and manufactured DC Voltage Strip Terminal Block PART NO. NO. OF pOles wire size mm length mm paCK Qty 1102 12 2.5 94 10 1122 12 4–6 111 10 1142 12 10 125 10

95 PART NO. BlACK PART NO. Red length mm CUrrent amps paCK Qty AC2B AC2R 42 3 10 AC3B AC3R 50 5 10 AC4B AC4R 68 10 10 AC5B AC5R 80 20 10 mini alligatOr Clip mini alligatOr Clips Alligator clips have a myriad of uses in laboratories, workshops and manufactured products. Carroll alligator clips are supplied complete with colour coded PVC insulators. PART NO. pOles amp rating maXimUm wire Od paCK Qty SY50 2 50 5.46mm 1 SY175 2 175 10.74mm 1 SY350 2 350 12.90mm 1 sy series COnneCtOrs sy series COnneCtOrs These DC rated two circuit connectors are available in 50, 175 and 350 amp current ratings. The connectors feature a special self cleaning contact design, that resists arcing by keeping the conductive surfaces clean and free of erosion. The plugs are especially suitable for electric forklifts, battery charging, jumper leads, winch and battery connections. quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au KeeP THe CONNeCTION. CONTACT uS FOR MORe INFORMATION ON eleCTRICAl COMPONeNTS.

tOOls hand Crimping tOOls 97 Cable tie gUns 101 Cable CUtters 100 stOrage bOXes 101 Cable strippers 100 wire strippers 100

97 hand Crimping tOOls Quikcrimper brand tooling, available exclusively from Carroll Australasia , has become the benchmark for long wearing, quality, electrical tradesman tools. We offer tools for the professional tradesman down to the budget conscious and general maintenance handyman. 0560 Ultra 0560 f0560 blfCt yaC5 PART NO. Class type Crimp range tOOl Qty 0560 ULTRA PROFESSIONAL RACHET R,B,Y 1 0560 PROFESSIONAL RACHET R,B,Y 1 0525 PROFESSIONAL RACHET R,B flag 1 RL7700 BUDGET RACHET R,B,Y 1 HT0560 PROFESSIONAL PLIERS R,B,Y 1 Crimp Tools - Pre-Insulated Terminals In order to achieve superior electrical and mechanical connections, it is necessary to employ simple yet precise crimping methods. Quikcrimper tools are carefully constructed to ensure that each connection will be uniformly excellent. In fact, the whole science of solderless wire termination depends upon the degree of control and accuracy used to form each pressure-crimped connection. This theory should be the basis used for the selection of an appropriate quality crimp tool. PART NO. Class type Crimp range tOOl Qty F0560 PROFESSIONAL RATCHET 0.5-6mm² 1 Crimp Tools - uninsulated ‘F’ Crimp PART NO. Class type Crimp range tOOl Qty YAC4 PROFESSIONAL PLIERS 0.25–2.5mm² 1 YAC5 PROFESSIONAL RATCHET 0.5–6.0mm² 1 YAC6 PROFESSIONAL RATCHET 6.0–16.0mm² 1 YAC7 PROFESSIONAL RATCHET 16.0–35.0mm² 1 Crimp Tools - Ferrules PART NO. desCriptiOn type Crimp range tOOl Qty BLFCT PROFESSIONAL RATCHET (FOR RED AND BLUE INSULATED TERMINALS) 0.5–6.0mm² 20–13 AWG 1 Crimp Tools - Pre-Insulated end Sleeve (Bootlace) Ferrules On our professional quality tools, we off er a two year warranty on parts! quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

TOOLS PART NO. desCriptiOn type Crimp range tOOl Qty RG5859 PROFESSIONAL RATCHET RG58,59/62 1 Crimp Tools - Coax Connectors RG5859 PART NO. Class type Crimp range tOOl Qty HD0510 PROFESSIONAL RATCHET 0.5–10mm2 1 HD0625 HEAVY DUTY HEAVY DUTY 6–25mm2 1 HD1095 PROFESSIONAL HEAVY DUTY 10–95mm2 1 HD0650 PROFESSIONAL HEAVY DUTY 6–50mm2 1 HD6120 PROFESSIONAL HEAVY DUTY 10–120mm2 1 Crimp Tools - uninsulated Copper lugs hd0510 hd0625 hd1095 hyd16/300 PART NO. Class type Crimp range tOOl Qty HYD16/300 12 TONNE HAND TOOL 16–300mm2 1 Crimp Tools - Hand Hydraulic

OuR BMP21-PluS SuCCeSSOR. IT’S dePeNdABle. ANYWHeRe... For more info visit www.BradyId.com.au/M210 print tOUgh labels anywhere with OUr new m210 label printer! 99quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

TOOLS Cable CUtters CC300r Unistripper CC60 yy319 PART NO. wire range length type tOOl Qty LHCC125 125mm² 300mm PIVOT 1 LHCC250 250mm² 545mm PIVOT 1 PART NO. wire range length type tOOl Qty CC38 38mm² 210mm ONE HAND 1 CC60 60mm² 230mm ONE HAND 1 CC70 70mm² 185mm ONE HAND 1 CC185 185mm² 580mm RATCHET 1 CC300R * 400mm² (max) 260mm RATCHET 1 *CC300R can also cut Copper Cable Max 400mm2 Cable CUtters drill Operated The Carroll drill operated Copper and Aluminium rated cable cutters make the task of cutting large diameter cables effortless. Simply attach the cutter mechanism to any hand held power drill. Supplied in a foam lined hard case for storage and mobility. Blades have a HRC rating of 48–52 at 150 kg. long Handled Carroll’s range of long handled cable cutters feature forged blades for long blade life and effortless cutting. Aluminium PART NO. WIRe RANGe dIA. type tOOl Qty DOC55 55mm DRILL-OPERATED 1 PART NO. type wire range tOOl Qty YY319 PROFESSIONAL 16–70mm² 1 Cable strippers • Screw knob cutting depth adjustment • Automatic clamping • Impact resistant plastic body lY-700F wire strippers PART NO. type wire range tOOl Qty LY-700F T-REX WIRE STRIPPER/ CUTTER 0.2–6mm2 1 UNISTRIPPER TOP STRIPPER 0.5–5.3mm² 1

101 f0560 12014254 Ctgm Ctgss PART NO. tOOl type style Crimp range tOOl Qty F0560 CRIMP RATCHET 0.5–6.0mm² 1 ET35 EXTRACTION HAND CONTACTS 1 Harnessflex Connector Installation Tools PART NO. tOOl type style Crimp range tOOl Qty 12014254 CRIMP RATCHET CONTACT & SEALS 0.5–2mm² 1 12085270 CRIMP RATCHET SEALS & CAVITY PLUGS ONLY 1 12085271 CRIMP RATCHET CONTACTS ONLY 0.5–2mm² 1 12014012 EXTRACTION HAND CONTACTS 1 Weather Pack Connector Tools PART NO. tie range sUit tie featUre tOOl Qty YYT6 2.2–4.8mm NYLON BUDGET 1 CTGM 2.2–4.8mm NYLON AUTOMATIC 1 CTGHD 3.6–9.0mm NYLON HEAVY DUTY 1 CTGSS 4.6–7.9mm STAINLESS STEEL AUTOMATIC 1 Cable tie gUns Kit bOX stOrage bOXes PART NO. bOX COnstrUCtiOn l X w X h mm diVisiOns Qty KBGS21 SMALL METAL 347 x 262 x 45 21 1 PB18 SMALL PLASTIC 318 x 205 x 48 18 1 KBS SMALL PLASTIC 270 x 173 x 48 11 1 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

Kits terminal Kits 103 COnneCtOr Kits fUse Kits prOfessiOnal lUg Kit 103 104 104 battery lUg Kit 105 heat shrinK tUbing Kit 104

103 Kits PART NO. COntents KBG500P TERMINAL KIT WITH TOOL - 500 PIECE 20 x Assorted Popular Pre-Insulated Terminals 1 x 0560 Crimping Tool 1 x Metal Box PART NO. COntents KBGS1325P TERMINAL KIT WITH TOOL - 1325 PIECE 20 x Assorted Popular Pre-Insulated Terminals 1 x 0560 Ratchet Tool 1 x Metal Box PART NO. COntents KBGS470P PROFESSIONAL LUG KIT - 470 PIECE Assorted Professional Lug Range 1 x Metal Box 1 x HD0510 Tool PART NO. COntents SEALIT-KIT HEAT SHRINKABLE TERMINAL KIT - 350 PIECE 18 x Assorted Popular Heat Shrink Sealed Terminals 1 x Plastic Box PART NO. COntents PBTKIT TERMINAL KIT WITH TOOL - 785 PIECE 18 x Assorted Popular Pre-Insulated Terminals 1 x Plastic Box quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

KITS Kits PART NO. COntents PBQKIT QK SERIES CONNECTOR KIT - 45 SETS 1-8 Circuit Connectors & Terminals 1 x Plastic box PART NO. COntents WPKIT WEATHER-PACK SEALED CONNECTOR KIT 1-6 Circuit Connectors, Terminals & Seals 1 x Plastic box PART NO. COntents PBFKIT ASSORTED FUSE KIT 3AG, Mini & Standard Blade Fuse Holders 1 x Plastic box PART NO. COntents HSKB HEAT SHRINK TUBING KIT Assorted Red & Black Colours General Purpose - Thin Wall Tubing Sizes Range 2mm-25mm 1 x Plastic Box PART NO. COntents QUIK-KIT INSULATED TERMINAL KIT WITH HT0560 PLIERS 20 x Popular pre-insulated terminals 1 x HT0560 Pliers 1 x Metal box PART NO. COntents QUIK-KIT/P INSULATED TERMINAL KIT WITH 0560 RATCHET TOOL 20 x Popular pre-insulated terminals 1 x 0560 Rachet tool 1 x Metal box

105 PART NO. COntents CF100A CERAMIC FUSE KIT Selection of Ceramic Fuses 1 x Fuse Puller 1 x Plastic Box PART NO. COntents BF100A STANDARD BLADE FUSE KIT Selection of Standard Blade Fuses 1 x Fuse puller 1 x Plastic box PART NO. COntents BFM100A MINI BLADE FUSE KIT Selection of Mini Blade Fuses 1 x Fuse puller 1 x Plastic box quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au PART NO. COntents BATLUGKIT BATTERY LUG KIT 20 x Popular crimp tube battery lugs to suit 6-000B&S 1 x Metal box

identifiCatiOn heateX 112 marKfast 108 steelmarK laser 114 KmarK 110 prOVen eXpertise in Cable marKing sOlUtiOns for many industries with fast turnaround through our in-house production capabilities.

An effective energy isolation program will protect workers and your assets. Carroll has a comprehensive range of lockout and tagout products available to help you keep your staff and workplace as safe as possible. phOne 1800 777 458 web carroll.com.au/lockout-tagout.html email sales@carroll.com.au CarrOll lOCKOUt tagOUt brOChUreprOdUCtreQUesta tOday! CARROLL 1800 777 458 sales@carroll.com.au H W R NG ACCES ORY SPEC AL ST QUAL TY S ANDARD SERV CE GUARANTEE EXCEPTIONAL CUSTOMER SERVICE REL ABLE D VERSE RANG carroll.com.au PRODUCT GUIDE FIRST AID LOCKOUT TAGOUT

Send your data to markfast@carroll.com.au or upload via our website. Call our Customer Service team on 1800 777 458 if you need assistance. Markfast orders received by 12pm (Sydney time) will be dispatched that day, large orders may vary. gUaranteed & eRROR-FRee. Order marKfast tOday 1 Quick and easy form to fill out 2 Choose sleeves to be pre-mounted 3 Trees available in 5 different colours! Understanding marKfast Carroll’s Markfast are pre-printed wiremarkers designed for all PLC, control and general marking applications. Wiremarkers come in trees and range in colours for matching to your workplace safety and identifi cation needs. Available on request - call Carroll today on 1800 777 458. Important notes: 32 markers per tree Two lines of custom header data per tree Convenient hole for grouping trees together Sleeves provided separately or assembled to the tree. Trees are made of Acrylic Halogen-Free material IDENTIFICATION

laser

PART NO. COlOUr

MF10E Black on White

MF10E-RD White on Red

MF10E-YL Black on Yellow

MF10E-GN White on Green

MF10E-BL White on Blue

MF10E-BK White on Black

MF18E Black on White

MF18E-RD White on Red

MF18E-YL Black on Yellow

MF18E-GN White on Green

MF18E-BL White on Blue

MF18E-BK White on Black

MF23E Black on White

MF23E-RD White on Red

MF23E-YL Black on Yellow

MF23E-GN White on Green

MF23E-BL White on Blue

MF23E-BK White on Black

PART NO. COlOUr

MF10EP Black on White

MF10EP-RD White on Red

MF10EP-YL Black on Yellow

MF10EP-GN White on Green

MF10EP-BL White on Blue

MF10EP-BK White on Black

MF18EP Black on White

MF18EP-RD White on Red

MF18EP-YL Black on Yellow

MF18EP-GN White on Green

MF18EP-BL White on Blue

MF18EP-BK White on Black

MF23EP Black on White

MF23EP-RD White on Red

MF23EP-YL Black on Yellow

MF23EP-GN White on Green

MF23EP-BL White on Blue

MF23EP-BK White on Black

109 marKfast

trees & sleeVes Designed for all PLC, control and general marking applications for wires and cables from 0.25 to 16mm2 (1.3 to 7.6mm2 or 22-6AWG) and beyond, by utilising the unique cable tie applied accessory. Features: • Fast and easy to apply • Super clear laser engraved characters • Broad wire range • Guaranteed error free markers, when data received electronically • Indelible and easy to read

Trees only Trees & Sleeves Preloaded PART NO. wide range mm2 wire Ø range mm sleeVe length mm paCK Qty MFS0/10 0.25–1.5 1.3–3.5 10 1000 MFS0/18 0.25–1.5 1.3–3.5 18 1000 MFS0/23 0.25–1.5 1.3–3.5 23 1000 MFS1/10 0.75–4.0 2.3–4.8 10 1000 MFS1/18 0.75–4.0 2.3–4.8 18 1000 MFS1/23 0.75–4.0 2.3–4.8 23 1000 MFS2/10 4.0–16.0 4.2–7.6 10 500 MFS2/18 4.0–16.0 4.2–7.6 18 500 MFS2/23 4.0–16.0 4.2–7.6 23 500 MFSCT UNLIMITED UNLIMITED 20 100 Sleeves Specifications MATERIAL ACRYLIC – HALOGEN FREE TAGS PER TREE 32 TAG LENGTHS 10MM, 18MM & 23MM MAXIMUM CHARACTERS PER LABEL Length 10mm 18mm 23mm Standard 5 8 13 Condensed 7 12 18 seleCt the wire marKer snap apart fiX dUal sleeVe Cable tie sleeVe

Can be Used indOOrs & OuTdOORS. Also great for switchboards and riser cabinets. Order KmarK tOday 1 Quick and easy form to fill out 2 uV-treated sleeves 3 Maximum of 24 characters Understanding KmarK Carroll’s Kmark are designed for general cable marking applications. Applied to the cable with nylon ties. Ordering is easy! Available on request - call Carroll today on 1800 777 458. Important notes: Fast and easy to apply. Quick to locate required markers. Supplied ‘On Site’ when you need them. Guaranteed error free markers, when data received electronically. Easy to read. Can be installed outdoors. 105mm length can have a maximum of 24 characters. IDENTIFICATION

KmarK Designed for general cable marking applications.Applied to the cable with nylon ties. Features: • Fast and easy to install • Conveniently organised on a cardboard backing • Guaranteed error free markers, when data received electronically • Easy to read • Tear resistant PART NO. maXimUm CharaCters marKer length mm paCK Qty KM35E 8 35 1 KM70E 16 70 1 KM105E 24 105 1 KmarK Kmark Markers Specifications Kmark Carrier Sleeves Specifications KmarK tie fiX seleCt the wire marKer MATERIAL TYPE Specially treated, UV resistant polypropylene TEMPERATURE RANGE -40ºC to +120ºC DIMENSIONS 9.5mm x 35, 70 & 105mm STANDARD CHARACTER HEIGHT 6.5mm MAXIMUM 6MM CHARACTERS PER LABEL 35mm – 8 70mm – 16 105mm – 24 COLOUR Bold block black print on yellow MATERIAL TYPE Transparent, UV stabilised polyethylene TEMPERATURE RANGE -75ºC TO +80ºC DIMENSIONS 10mm x 47, 85 & 117mm MOUNTING Supplied with Nylon Cable Tie CT165B installed CABLE TIE BUNDLE DIAMETERS (CT200L & CT200LB & CT143B optional) CT165 – 44mm (13⁄4”) ø. CT200L – 55mm (2”) ø. Send your data to markfast@carroll.com.au or upload via our website. Call our Customer Service team on 1800 777 458 if you need assistance. 111quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

engineered TO ORdeR... heatex ™ tags have a great ability to withstand wear and tear. Order heateX™ tOday 1 Quick and easy form to fill out 2 up to 24 characters on a tag 3 Rolls of 1,000 markers! Understanding heateX™ Heatex™ cable markers are made of a thermoplastic polythetic polyurethane zero halogen material. Ideal for extreme indoor areas and in high temperature or humidity. Ordering is easy! Available on request - call Carroll today on 1800 777 458. IDENTIFICATION

113 heateX™ • Font size: 11 points • Font type: Arial bold • Maximum characters using this font: 12 PART NO. COlOUr width mm height mm CharaCters CH6010WT White 60 10 12 (font size 11) Arial bold CH6010YL Yellow 60 10 12 (font size 11) Arial bold CH7515WT White 75 15 12 (font size 11) Arial bold CH7515YL Yellow 75 15 12 (font size 11) Arial bold CarrOll’s heateX™ quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

dOn’t get CAuGHT OuT. dIY steel tags provide peace of mind when working outside. Order steelmarK laser tOday 1 Quick and easy form to fill out 2 316 Stainless Steel 3 Ideal for outdoor applications! Available on request - call Carroll today on 1800 777 458. Understanding steelmarK laser Carroll’s Steelmark Laser etched onto 316 stainless steel with specifi c characters to suit your requirements. Ordering is easy! IDENTIFICATION

115 steelmarK steelmarK laser Permanent ID manufactured from quality 316 stainless steel and suited to hazardous, aggressive and fire rated environments. Applied to the cable with standard or heavy duty stainless steel cable tie (sold separately). PART NO. CharaCters standard size CharaCters COndensed size CharaCter height mm marKer width mm marKer length mm marKer thiCKness mm SSL70 10 12 4.0–5.0 9.5 70 0.5 SSL90 15 19 4.0–5.0 9.5 90 0.5 SSL110 20 25 4.0–5.0 9.5 110 0.5 SSL130 28 36 4.0-5.0 9.5 130 0.5 Specifications MATERIAL SS316 Stainless Steel TEMPERATURE RANGE -45ºC to +500ºC MARKER STRIP WIDTH 9.5mm CHARACTER HEIGHT 4.5mm TECHNICAL PROPERTIES MATERIAL TYPE 316 Stainless Steel TEMPERATURE RANGE -45ºC to +500ºC PRINT TECHNOLOGY Laser Engraved WIDTH 9.5mm THICKNESS 0.5mm See page 67 for Carroll’s Cable Tie range! reCOmmended prOdUCt Stainless Steel Cable Ties PART NO. steel grade length X width mm bUndle Ø mm tensile strength (KG) paCK Qty SSCT200/316 316 201 x 4.6 50 44.5 100 SSCT360/316 316 360 x 4.6 100 44.5 100 SSCT520/316 316 520 x 4.6 150 44.5 100 stainless steel Cable ties See page 101 for Carroll’s Cable Tie Gun range! reCOmmended prOdUCt Ctgss PART NO. tie range sUit tie featUre tOOl Qty CTGSS 4.6–7.9mm STAINLESS STEEL AUTOMATIC 1 Cable Tie Gun quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

label printers bmp71 pOrtable label printer m210 label printer 121 117 sOftware bmp61 pOrtable label printer 124 118

printer ships in a Carton Pack with a Quick Start Guide and an M21-750-499 label cartridge.

accessory consists of Magnet, Flashlight, Stand, Belt loop and Pole strap. 2 AAA

required (not included).

117 brady printers M210 label Printer • Get fast and accurate labels on-site using auto-formatting with 11 pre-loaded application design guides • Take on the toughest labelling jobs – Military-grade shock and vibration resistance per MIL-STD-810G Method 5.16.6 SA4.6.5 • Conveniently store up to 12 label files up to 2MB • Choose from 90 compatible, easy-to-load cartridges made from 12 material types PART NO. desCriptiOn 152260 M210 Label Printer - Carton Pack* 110937 AC Adaptor - M210 150617 Protective soft bag for portable printers - M210 170385 Belt Clip - M210 139540 Lithium-ion Battery Pack - M210 880347 AC Adapter & Lithium-Ion Battery Pack 170421 Hard Case - M210 170424 Multifunctional Accessory - M210 170425 Magnet Only Accessory - M210 Self-laminating Vinyl (B-427) • UL recognised and RoHs compliant • Ideal for marking data and electrical cables • Self extinguishing material • Temperature range -40°C to +70°C PART NO. COlOUr size 110927 Black On White 19.05mm x 4.27m 110928 Black On White 25.4mm x 4.27m 110929 Black On White 30.48mm x 4.27m 110930 Black On White 38.1mm x 4.27m Nylon Cloth (B-499) • UL Recognised and RoHS Compliant • Ideal for wire and cable, patch panels, terminal blocks, face plates and general identification • Ideal for environments where heat, cold, oil and dirt are present • Temperature range -40°C to +90°C PART NO. COlOUr size 110893 Black On White 9.53mm x 4.88m 110894 Black On White 12.7mm x 4.88m 110895 Black On White 19.05mm x 4.88m 110938 Black On White – For Terminal Blocks 9.53mm x 4.88m 110939 Black On White – For Terminal Blocks 12.7mm x 4.88m quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au *This

**Multifunctional

batteries

Printer Ribbons All materials in the printer will work with a new series of M61 ribbons that easily fit into the printer. PART NO. referenCe COlOUr desCriptiOn size 148134 M61-R6610 Black R6600 Series Ribbon 50.8mm x 22.85m 148129 M61-R4310 Black R4300 Series Ribbon 50.8mm x 22.85m bmp®61-Portable label Printer • Large, Intuitive Colour Touch-Screen Display • Fast Print Speed 33.8mm/sec • Crisp Print with 300 dpi Printhead • Auto Label Formatting with Smart-Cell Technology • Die-Cut, Continuous & Custom Label Supplies Up to 51mm • Industrial, Drop Tested Rugged Design • Data Connectivity via USB and WiFi • Compatible with Brady Workstation software. Go to Workstation.BradyID.com for further details Printer ships with Nickel Battery Pack, MC1-1000-595-WT-BK cartridge, USB Cable, AC Adapter Product CD, Brady Printer Drivers CD and Quick Start Guide. PART NO. desCriptiOn 877863 BMP61 Label Printer with WiFi 146220 Hardcase 146233 Carrying Strap 146221 Magnet Accessory 876185 External Battery Quick Charger 133255 Rechargeable NiHM Battery 146228 Battery Cover 146222 Cutter Accessory 18556 Cleaning Kit 5-Pack LABEL PRINTERS Safety LabelsAsset Tracking LabelsDurasleeve Inserts Self-Laminating Labels

119 PART NO. Qty/rOll size COlOUr maX lines Of print ReC. ribbOn B-390 Polypropylene Wire Marking Inserts 18684 300 15 x 3.93mm Insert White 1 M61-R6610 18685 300 30 x 3.93mm Insert White 1 M61-R6610 19305 3,000 15 x 3.93mm Insert White 1 M61-R6610 19306 3,000 30 x 3.93mm Insert White 1 M61-R6610 durasleeve® Wire Marking (B-390) Brady’s most popular wire & cable marking solution. Durasleeve® markers create a durable legend. This solution consists of two components: a transparent PVC (carrier) with a label pocket and a polypropylene insert (designed to be printed on) to slide into this pocket. • Long lasting and durable marking of wires and cables • Legend is at all times protected by the tube and can easily be replaced • Available in white, 15mm or 30mm length PART NO. Qty/rOll size Durasleeve Wire Marking Carriers 13255 1,000 15mm - Fits Wire O.D 1.3-3.0mm 13256 1,000 15mm - Fits Wire O.D 2.5–5.0mm 13262 500 30mm - Fits Wire O.D 1.3-3.0mm 13263 500 30mm - Fits Wire O.D 2.5–5.0mm Self-laminating Vinyl (B-427) RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC; UL approved • Excellent material for wire and cable identification • Features a white printable area with a clear “tail” that wraps around the marker to protect the print • Durable, permanent acrylic adhesive has outstanding water and oil resistance • Service temperature of -40°C to 70°C PART NO. COlOUr label width a mm label width b mm write On area C mm APPROX. wire gaUge labels per rOw labels per pKg ReC. RIBBON 18373 White 25.4 25.4 9.5 12 to 10 1 250 M61-R4310 115108 White 25.4 25.4 9.5 12 to 10 1 2,500 M61-R4310 18422 White 19.1 38.1 12.7 10 to 4 1 250 M61-R4310 114875 White 19.1 38.1 12.7 10 to 4 1 2,500 M61-R4310 18428 White 25.4 38.1 12.7 10 to 4 1 250 M61-R4310 114876 White 25.4 38.1 12.7 10 to 4 1 2,500 M61-R4310 18432 White 38.1 38.1 12.7 10 to 4 1 250 M61-R4310 114877 White 38.1 38.1 12.7 10 to 4 1 1,000 M61-R4310 18380 White 25.4 63.5 19.1 Cables 1 100 M61-R4310 114873 White 25.4 63.5 19.1 Cables 1 1,000 M61-R4310 C = Write-On AreaA = Label Width B = Label Height A B CTEXT 1 TEXT 1 quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

Permanent Heat Shrink Wire Identification

Permasleeve Heat-Shrink Polyolefin (B-342) • 3:1 heat shrinkable sleeve fit snugly around wires for maximum insulation protection and permanent identification • Fade-resistant and smudge-proof for superior aesthetic appearance • Cold resistant and flame-retardant with an operating temperature of -55°C to 135°C • Meets SAE-AMS-DTL-23053/5C (Class 1), SAE-AS-81531, MIL-STD-202; RoHS Compliant; and UL Recognised PART NO. COlOUr APPROX. wire gaUge range Of wire diameter mm sUpplied diameter b mm sleeVe length a mm reCOVered diameter mm sleeVes per rOll ReC. RIBBON 18457 White 22 to 16 1.2 - 2.8 3.2 25.8 1.2 100 M61-R4310 115010 White 22 to 16 1.2 - 2.8 3.2 25.8 1.2 1,000 M61-R4310 18458 White 22 to 10 1.6 - 3.8 4.7 25.8 1.6 100 M61-R4310 115088 White 22 to 10 1.6 - 3.8 4.7 25.8 1.6 1,000 M61-R4310 18459 White 16 to 8 2.4 - 5.5 6.4 25.8 2.4 100 M61-R4310 115115 White 16 to 8 2.4 - 5.5 6.4 25.8 2.4 1,000 M61-R4310 115008 White 22 to 16 1.2 - 2.8 3.2 44.8 1.2 1,000 M61-R4310 115011 White 20 to 10 1.6 - 3.8 4.7 44.8 1.6 1,000 M61-R4310 18779 White 16 to 8 2.4 - 5.5 6.4 44.8 2.4 1,000 M61-R4310 B = Supplied DiameterA = Sleeve Width A B (Ø diameter)

Brady’s non-adhesive, printable heat shrink wire marking sleeves fi t snugly around wires or cables for maximum insulation protection and permanent identifi cation. Brady’s heat shrink sleeving is a full-circle design that provides fast and permanent wire marking. Clear, legible text can be printed on the wire and cable sleeving with a Brady printer for reliable wire identifi cation. Brady heat shrink sleeving materials excel in extreme environments, including temperature ﬂ uctuations and environments that require abrasion and chemical resistance. LABEL PRINTERS

121 bmp®71 Portable Printer • Ideal for the office, warehouse, racks and shelves, pipes, control panels, face plates, wires and cables and much more • Portable and easy to carry with attached handle • Prints on more than 30 different Brady material types • Large full colour graphic LCD display – see the label before you print • Thermal transfer print technology • Simple to load, smart chipped labels and ribbons for automatic font sizing and calibration • Include extensive library of over 500 built-in graphics, plus built-in barcodes and serialisation • The BMP®71 includes your choice of Brady Workstation PWID or SFID software. Go to Workstation.BradyID.com for further details. PART NO. desCriptiOn 872044 BMP ®71 Printer* w/ Brady Workstation PWID Software 115158 BMP ®71 Printer* w/ Brady Workstation SFID Software 114881 Hardcase 114882 Softcase 871843 AC Adaptor 871844 Quick Charger 114885 Battery 114886 Cleaning Kit 103788 USB Cable *Label printer ships with Hardcase, Charger/AC Adaptor, 1 x Roll of M71-31-423, White Die Cut Labels, 1 x R6000 Ribbon Cartridge, Roll Adaptor, USB Cable, Quickstart Guide, a CD including the Printer Driver, User Guide and Tutorial. general identifiCatiOneleCtriCal labelling permasleeVe safety labels data COmmUniCatiOns SelF-lAMINATING lABelS The one way to faster, easier label printing! bmp71 pOrtable printer with label MAKING SOFTWARe (PWId) bmp71 pOrtable printer with label MAKING SOFTWARe (SFId) quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

PART NO. Qty/rOll size COlOUr COlOUr B-390 Polypropylene Wire Marking Inserts 872146 300 15 x 3.93mm Insert White M71-R6000 872147 300 30 x 3.93mm Insert White M71-R6000 872148 3,000 15 x 3.93mm Insert White M71-R6000 872149 3,000 30 x 3.93mm Insert White M71-R6000 durasleeve® Wire Marking (B-390) • Long lasting and durable marking of wires and cables • Legend is at all times protected by the tube and can easily be replaced • Available in White, 15mm or 30mm length PART NO. Qty/rOll size Durasleeve Wiremarking Carriers 13255 1,000 15mm - Fits Wire O.D 1.3-3.0mm 13256 1,000 15mm - Fits Wire O.D 2.5–5.0mm 13262 500 30mm - Fits Wire O.D 1.3-3.0mm 13263 500 30mm - Fits Wire O.D 2.5–5.0mm Permasleeve Heat-Shrink Polyolefin (B-342) • 3:1 heat shrinkable sleeve fit snugly around wires for maximum insulation protection and permanent identification • Fade-resistant and smudge-proof for superior aesthetic appearance • Cold resistant and flame-retardant with an operating temperature of -55°C to 135°C • Meets SAE-AMS-DTL-23053/5C (Class 1), SAE-AS-81531, MIL-STD-202; RoHS Compliant; and UL Recognised PART NO. COlOUr APPROX. wire gaUge range Of wire diameter mm sUpplied diameter b mm sleeVe length a mm reCOVered diameter mm sleeVes per rOll ReC. RIBBON 115085 White 22 to 16 1.2 - 2.8 3.2 25.8 1.2 100 R-4300 115010 White 22 to 16 1.2 - 2.8 3.2 25.8 1.2 1,000 R-4300 115087 White 20 to 10 1.6 - 3.8 4.7 25.8 1.6 100 R-4300 115088 White 20 to 10 1.6 - 3.8 4.7 25.8 1.6 1,000 R-4300 115086 White 16 to 8 2.4 - 5.5 6.4 25.8 2.4 100 R-4300 115016 White 16 to 8 2.4 - 5.5 6.4 25.8 2.4 1,000 R-4300 115008 White 22 to 16 1.2 - 2.8 3.2 44.8 1.2 1,000 R-4300 115011 White 20 to 10 1.6 - 3.8 4.7 44.8 1.6 1,000 R-4300 115014 White 16 to 8 2.4 - 5.5 6.4 44.8 2.4 1,000 R-4300 B = Supplied DiameterA = Sleeve Width A B (Ø diameter) LABEL PRINTERS

115102

115108

114804

114875

115100

114876

115093

114877

2,500

25.40

2,500 25.40

12–10 R-4300

12.70 10–4 R-4300

38.10 38.10 12.70 10–4 R-4300

1,000 38.10

12.70 10–4 R-4300

115101 White 100 25.40 63.50 19.05 Cables R-4300

114873

A41675

1,000 25.40

38.10

19.05 Cables R-4300

38.10 Cables R-4300

123 Self laminating Vinyl (B-427) • UL recognised and roHs compliant • A self-laminated format with a white printable zone and a translucent overlaminating area • An excellent material for wire and cable identification • Good clarity, conformability and is self-extinguishing • Outstanding water and oil resistance • Suitable for BMP®71 Printer PART NO. COlOUr labels per rOll dimensiOns write On wire gaUge ReC. RIBBON series A (mm) B (mm) C (mm)

White 250 25.40 25.40 9.53 12–10 R-4300

White 2500 25.40 25.40 9.53

White 250 19.05 38.10

White

19.05 38.10

White 250

38.10

White

38.10

White 250

White

38.10

White

63.50

White 50

152.40

A41676 White 500 38.10 152.40

1. Apply the printed area to your wire. 2. Wrap the clear area around the wire covering the printed area. 3. Once applied, the clear laminate will protect your legend for years to come. Applying a self-laminating vinyl label is easy! quikcrimp.com.au1800 777 458 sales@carroll.com.aucarroll.com.au

Brady Workstation Software

The latest in label creation software, Brady Workstation is revolutionising how you design and print labels and signs. Simply pick the apps you need to get the job done, and enjoy the benefits of simple, efficient and flexible label creation. All apps come with a 30 day no obligation trial period to make sure the apps you download work for you.

include a Brady printer:

Brady Workstation now works seamlessly with the full range of Brady desktop and portable printers. Users can easily connect a Brady printer to a computer with Brady Workstation to access and print their labels and signs, all without the need to install any drivers.

laBel creation suites:

These suites include a combination of apps and are tailored to help with specific label situations. With suites for wire identification, product identification, safety and facility identification, data automation and protected label templates, Brady Workstation has all of your labelling needs covered.

learn more at Workstation.BradyId.com

get brady wOrKstatiOn tOday!

Download Brady Workstation at workstation.bradyid.com

Fill the workstation with the apps you want and leave out the ones you don’t 3.

Save time by quickly designing labels and printing them on your Brady printer

LABEL PRINTERS

0-9 000EN 31 000EP 31 000SN 31 000SP 31 000TEN 31 000TEP 31 0-0925590 31 00EN 31 00EP 31 00SN 31 00SP 31 00TEN 31 00TEP 31 0525 97 0560 97 0560 ULTRA 97 0EN 31 0EP 31 0SN 31 0SP 31 0TEN 31 0TEP 31 1102 94 1122 94 1142 94 13255 119 13256 119 13262 119 13263 119 18373 119 18380 119 18422 119 18428 119 18432 119 18457 120 18458 120 18459 120 18556 118 18684 119 18685 119 19305 119 19306 119 103788 121 110893 117 110894 117 110895 117 110927 117 110928 117 110929 117 110930 117 110937 117 110938 117 110939 117 114804 123 114873 123 114875 123 114876 123 114877 123 114881 121 114882 121 114885 121 114886 121 115008 122 115010 122 115011 122 115014 122

115016 122 115085 122 115086 122 115087 122 115088 122 115093 123 115100 123 115101 123 115102 123 115108 123 115115 120 115158 121 133255 118 139535 118 139540 118 139540 117 139542 118 146220 118 146221 118 146222 118 146228 118 146233 118 147998 121 148129 118 148134 118 150617 117 152260 117 170385 117 170421 117 170424 117 170425 117 180900 88 180901 88 180904 88 180923 88 180924 88 871843 121 871844 121 872044 121 872146 122 872147 122 872148 122 872149 122 876185 118 877863 118 880347 117 2962965 92 12004943

12010105

12010293

12010300

12010717

12010852

12010973

12010974

12010975 91 12010996 91 12014012 101 12014254 101 12015024 91 12015193 91 12015323 91 12015791 91 12015792 91 12015793 91 12015797 90 12015798 91

12015799 91 12015899 91 12020005 91 12020991 90 12033731 63 12033769 63 12033871 93 12034342 90 12065158 91 12085270 101 12085271 101 1280703026 92 12004568L 63 12015865L 93 12020321L 63 12020801L 90 12033997L 63 12089040L 90 12089188L 90 12089307L 90 120EN 31 120EP 31 120SN 31 120SP 31 120TEN 31 120TEP 31 12124580L 90 12124581L 90 12124582L 90 12124587L 90 14-10 38 14-12 38 14-5 38 14-6 38 14-8 38 1ADIODE 64 1C22CW 91 22-10 38 22-12 38 22-6 38 22-8 38 245 90 2C1CW 91 2C2CW 91 2C3CW 91 2C4CIW 91 2C4CSW 91 2C5CW 91 2C6CW 91 2EN 31 2EP 31 2MF6 19 2SN 31 2SP 31 2TEN 31 2TEP 31 38-10 38 38-12 38 38-6 38 38-8 38 38-S10 38 38-S6 38 38-S8 38 3ADIODE 64 3SN 31 3SP 31 4SN 31

4SP 31 5661-010B 37 5661-010R 37 5662-010B 37 5662-010R 37 5663-010B 37 5663-010R 37 6007-1 83 6007-12 83 6007-15 83 6007-2 83 6007-3 83 6007-4 83 6007-6 83 6007-9 83 6007PH02 83 6007PH03 83 6007PH04 83 6007PH06 83 6007PH12 83 6007RH02 83 6007RH03 83 6007RH04 83 6007RH06 83 6007RH12 83 60-10 38 60-12 38 6014-000 37 602402BL2 19 602501BL2 19 604001BL2 19 604002VL 19 604201BL2 19 604402BL2 19 604402BLNK 19 604402VL 19 604501BL2 85 604502BL2 85 605001BL2 85 605402BL2 19 605501BL2 85 605502BL2 85 60-6 38 60-8 38 610201VL 19 66047BL2 86 66057BL2 86 6622-100B 37 6622-100R 37 6ADIODE 64 7005LT1 83 7005LT2 83 7006LT1 83 7006LT2 83 70-10 38 70-12 38 70-16 38 70-6 38 70-8 38 80-10 38 80-12 38 8-10 38 8-12 38 827551-3 92 8-5 38 859G547-B 92 8-6 38

8-8 38 95EN 31 95EP 31 95SN 31 95SP 31 95TEN 31 95TEP 31 90806 19 a A00352 22 A00382 22 A00552 22 A00752 22 A01052 22 A01552 22 A01582 22 A02552 22 A02582/100 22 A04052 22 A04082 22 A06052 22 A06082 22 A10052 22 A10082 22 A16052 22 A16082 22 A25082 22 A25092 22 A35082 22 A35092 22 A41675 123 A41676 123 A50082 22 A70082 22 A95082 22 AC2B 95 AC2R 95 AC3B 95 AC3R 95 AC4B 95 AC4R 95 AC5B 95 AC5R 95

indeX

ADDITION 64 AF10 61 AF15 61 AF20 61 AF25 61 AF3 61 AF30 61 AF5 61 AF7.5 61 AMB19 71 AMB19B 71 AMB25 71 AMB25B 71 AR0552 22 AR0752 22 AR1052 22 AR1552 22 AR2552 22 AT0752 23 AT1052 23 AT1552 23 AT2552 23 AT4052 23 AT6052 23 125quikcrimp.com.aucarroll.com.au

AU00552 23

AU00752 23

AU01052 23

AU01552 23

AU01582 23

AU02552 23

AU02572 23 AU04052 23 AU04082 23 AU06052 23 AU06082 23

AU06092 23 AU10082 23

AU10092 23 AU16082 23 AU16092 23 AU25082 23 AU35082 23 AU50082 23 AU70802 23 AU95082 23 B B00010 34 B00012 34 B0010 34 B0010/50 34 B0012 34 B0012/50 34 B010 34 B010/50 34 B012 34 B12012 34 B14 38 B206 34 B208 34 B210 34 B212 34 B22 38 B310 34 B38 38 B410 34 B60 38 B70 38 B8 38 B9508 34 B9508/50 34 B9510 34 B9510/50 34 B9512 34 B9512/50 34 BATLUGKIT 105 BCF1-4 17 BCF2-5 17 BCF5-5 17 BCM1-4 17 BCM2-5 17 BCM5-5 17 BF100A 105 BF1-5 19 BF1-5VL 19 BFH 62 BFHW 62

BFHX412 62 BFHX812 62 BFK 62

BFM100A 105 BFMH 62

BFX100 61 BFX20 61 BFX30 61 BFX40 61 BFX50 61 BFX60 61 BFX80 61 BGF 62 BLFCT 97 BM1-5 19 BM1-5VL 19 BRP1 92 BRP3 92 BRP4 92 BS1 18 BS2 18 BS5 18 BSC1 14 BSC2 14 BSC5 14 BSV1 14 BSV2 14 BSV5 14 BSW1 21 BSW1/100 21 BSW2 21 BSW2/100 21 BSW5 21 BSW5/100 21 BWF2-5 21 BWM2-5 21 c CAB10M1690-CA 56 CAB10M16-CA 55 CAB12M1690-CA 56 CAB12M16-CA 55 CAB12M20-CA 55 CAB16M1690-CA 56 CAB16M16-CA 55 CAB16M2090-CA 56 CAB16M20-CA 55 CAB16PG13-CA 55 CAB20M2090-CA 56 CAB20M20-CA 55 CAB25M2590-CA

CAB25M25-CA

CAB28M2590-CA

CAB32M3290-CA

CAB32M32-CA

CAB40M40-CA

CF100A 105 CFH 62 CG12 50 CG16 50 CG20

CG25 50 CG32 50 CG40 50 CG50 50 CG63 50 CG63L 50 CGC1 74 CGC2 74 CGC3 74 CH6010BK 113 CH6010OR 113 CH6010RD 113 CH6010WT 113 CH6010YL 113 CH7515WT 113 CH7515YL 113 CMF25X12 59 CP1000 72 CP300 72 CSC1 94 CSC2 94 CSCM24902 59 CSCM27902 59 CT1000 72 CT102 68 CT102/1000 68 CT102B 68 CT102B/1000 68 CT1168 69 CT1168B 69 CT143 68 CT143B 68 CT194 68 CT194B 68 CT194BL 72 CT194G 72 CT194P 72 CT194R 72 CT194Y 72 CT200L 68 CT200LB 68 CT200M 68 CT200MB 68 CT280 68 CT280B 68 CT292 68 CT292B 68 CT300B 69 CT370 68 CT370B 68 CT370MB 68 CT373 69 CT373B 69 CT373GHS 69 CT432 68 CT432B 68 CT550 69 CT550B 69 CT550HB 69 CT838 69 CT838B 69 CTA4 70

CTC12B 75 CTC12B/10 75 CTC12N 75 CTC12N/10 75 CTC19B/10 75 CTC19N/10 75 CTC24B 75 CTC24N 75 CTC3B 75 CTC3B/10 75 CTC3N 75 CTC3N/10 75 CTC6B 75 CTC6B/10 75 CTC6N 75 CTC6N/10 75 CTGHD 101 CTGM 101 CTGSS 101 CTHD 70 CTHD/B 70 CTP10 57 CTP12 57 CTP16 57 CTP6 73 CTP9 73 CTPB20 57 CTPB25 57 CTPB28 57 CTPB32 57 CTS 70 CTS/B 70 CUI1.5 28 CUI10 28 CUI120 28 CUI150 28 CUI16 28 CUI185 28 CUI2.5 28 CUI240 28 CUI25 28 CUI300 28 CUI35 28 CUI4 28 CUI400 28 CUI50 28 CUI500 28 CUI6 28 CUI630 28 CUI70 28 CUI95 28 CUL1.5-6 25 CUL10-10 25 CUL10-12 25 CUL10-5 25 CUL10-6/50 25 CUL10-8 25 CUL120-10 26 CUL120-12 26 CUL120-16 26 CUL120-8 26 CUL150-10 26 CUL150-12 26 CUL150-16 26 CUL16-10 25 CUL16-12 25 CUL16-6 25

CUL16-8 25 CUL185-10 26 CUL185-12 26 CUL185-16 26 CUL2.5-4 25 CUL2.5-5 25 CUL2.5-6 25 CUL2.5-8 25 CUL240-10 26 CUL240-12 26 CUL240-16 26 CUL25-10 25 CUL25-12 25 CUL25-6 25 CUL25-8 25 CUL300-0 26 CUL300-12 26 CUL300-16 26 CUL35-10 25 CUL35-12 25 CUL35-6 25 CUL35-8 25 CUL400-0 26 CUL400-12 26 CUL400-16 26 CUL4-10 25 CUL4-5 25 CUL4-6 25 CUL4-8 25 CUL500-0 26 CUL500-12 26 CUL500-16 26 CUL50-10 25 CUL50-10/90 27 CUL50-12 26 CUL50-12/90 27 CUL50-6 25 CUL50-8 25 CUL50-8/90 27 CUL6-10 25 CUL630-0 26 CUL630-12 26 CUL630-16 26 CUL6-5 25 CUL6-6 25 CUL6-8 25 CUL70-10 26 CUL70-10/90 27 CUL70-12 26 CUL70-12/90 27 CUL70-16 26 CUL70-6 26 CUL70-8 26 CUL70-8/90 27 CUL95-10 26 CUL95-10/90 27 CUL95-12 26 CUL95-12/90 27 CUL95-16 26 CUL95-6 26 CUL95-8 26 CUL95-8/90 27 CXP20 58 d DIN3515S 79 DIN3575S 79 DOC55 100

INDEX

55 CAB40F90 56 CAB40M4090 56

55 CB10A 64 CB15A 64 CB20A 64 CB25A 64 CB30A 64 CB40A 64 CB50A 64 CBP20A 64 CBP30A 64 CBP40A 64 CBP50A 64 CC300R 100 CC38 100 CC60 100 CC70 100

indeX

DS1

DS2

DST1

DT1

DT145

DT145/5.3 19

DT290 19

DUCT 51 DW12/4 47

DW12/4R 47 DW19/6 47 DW19/6R 47 DW24/8 47 DW24/8R 47 DW40/13 47 DW40/13R 47 DW6/2 47 DW6/2R 47 DW9/3 47 DW9/3R 47 DWL12/4 46 DWL12/4R 46 DWL19/6 46 DWL19/6R 46 DWL24/8 46

DWL24/8R 46

DWL3/1 46

DWL3/1R 46 DWL40/13 46

DWL40/13R 46 DWL6/2 46 DWL6/2R 46 DWL9/3 46 DWL9/3R 46

EC100/48

EC120/59 48 EC24/11

EC33/18 48 EC50/27 48 EC70/38

EK03-10

EK05-10

ESN12-CA

ESN16-CA

ESN20-CA

ESN25-CA

ESN32-CA

FBC1-2.3

FBC1-2.3L

FBC1-3

FBC1-3L

FBC2-2.3

FBC2-2.3L 15 FBC5-3 15 FBC5-5 15 FC25

FH10

GAFFAB

GF100A

GFHLD 62 H H2852 19 HCB08/HX 60 HCB12/HX 60 HCB16/HX 60 HCB20/HX 60 HCB28/HX 60 HCB32/HX 60 HCB40/HX 60 HCB50/HX 60 HD0510 98 HD0625 98 HD0650 98 HD1095 98 HD6120 98 HLK 93 HS1.5BK 44 HS1.5C 44 HS1.5W 44 HS102BK 45 HS102BL 45 HS102C 45 HS102G 45 HS102RD 45 HS102W 45 HS10BK 45 HS10BL 45 HS10C 45 HS10GY-100 45 HS10RD 45 HS10W 45 HS13BK 45 HS13BL 45 HS13C 45 HS13GY-100 45 HS13RD 45 HS13W 45 HS16BK 45 HS16BL 45 HS16C 45 HS16RD 45 HS16W 45 HS19BK 45 HS19BL 45 HS19C 45 HS19GY-100 45 HS19RD 45 HS19W 45 HS25BK 45 HS25BL 45 HS25C 45 HS25GY-50 45 HS25RD 45 HS25W 45 HS2BK 44 HS2C 44 HS30BL 45 HS38BK 45 HS38BL 45 HS38C 45 HS38GY-50 45 HS38RD 45 HS38W 45 HS3BK 44 HS3BL 44 HS3C 44

HS3RD 44 HS3W 44 HS51BK 45 HS51BL 45 HS51C 45 HS51RD 45 HS51W 45 HS5BK 44 HS5BL 44 HS5C 44 HS5RD 44 HS5W 44 HS6BK 44 HS6BL 44 HS6C 44 HS6GY-100 44 HS6RD 44 HS6W 44 HS76BK 45 HS76BL 45 HS76C 45 HS76G 45 HS76RD 45 HS76W 45 HSL1.5BK 42 HSL1.5BL 42 HSL1.5C 42 HSL1.5RD 42 HSL1.5W 42 HSL1.5Y 42 HSL102BK 46 HSL102BL 46 HSL102R 46 HSL102W 46 HSL102Y 46 HSL10BK 43 HSL10BL 43 HSL10C 43 HSL10G 43 HSL10GY 43 HSL10RD 43 HSL10W 43 HSL10Y 43 HSL13BK 43 HSL13BL 43 HSL13C 43 HSL13GY 43 HSL13RD 43 HSL13W 43 HSL16BK 43 HSL16RD 43 HSL19Y 43 HSL1BK 42 HSL1C 42 HSL25BK 43 HSL25BL 43 HSL25C 43 HSL25G 43 HSL25GY 43 HSL25RD 43 HSL25W 43 HSL25Y 43 HSL2RD 42 HSL38BK 43 HSL38BL 43 HSL38C 43 HSL38GY 43

HSL38RD 43 HSL38W 43 HSL38Y 43 HSL3BK 43 HSL3BL 43 HSL3C 42 HSL3G 42 HSL3RD 42 HSL3W 42 HSL3Y 42 HSL51BK 46 HSL51BL 46 HSL51C 46 HSL51G 46 HSL51RD 46 HSL51W 46 HSL51Y 46 HSL5BK 42 HSL5BL 42 HSL5C 42 HSL5G 42 HSL5RD 42 HSL5W 42 HSL5Y 42 HSL6BK 42 HSL6BL 42 HSL6C 42 HSL6G 42 HSL6GY 42 HSL6RD 42 HSL6W 42 HSL6Y 42 HSL76BK 46 HSL76BL 46 HSL76C 46 HSL76G 46 HSL76R 46 HSL76W 46 HT0560 97 HWL102/44 47 HWL12/5 47 HWL122/52 47 HWL146/58 47 HWL20/8 47 HWL30/12 47 HWL40/17 47 HWL52/20 47 HWL68/26 47 HWL80/30 47 i IT110 70 IT194 70 K KBG500P 103 KBGS1325P 103 KBGS21 101 KBGS470P 103 KM105E 111 KM35E 111 KM70E 111 l LBC1-3 16 LBC1-5 16 LBC2-3 16 LBC2-5 16 LBC5-3 16 LBC5-5 16

LHCC125 100 LHCC250 100 LNM/M12 50 LNM/M16 50 LNM/M20 50 LNM/M25 50 LNM/M32 50 LNM/M40 50 LNM/M50 50 LNM/M63 50 LP13B 36 LP13R 36 LP16B 36 LP16R 36 LPLB120-10 30 LPLB120-12 30 LPLB150-12 30 LPLB16-6 30 LPLB16-8 30 LPLB185-12 30 LPLB240-12 30 LPLB25-10 30 LPLB25-8 30 LPLB300-0 30 LPLB35-10 30 LPLB35-12 30 LPLB35-8 30 LPLB400-0 30 LPLB500-0 30 LPLB50-10 30 LPLB50-12 30 LPLB630-0 30 LPLB70-10 30 LPLB70-12 30 LPLB95-10 30 LPLB95-12 30 LT10/100M 77 LT10/10M 77 LT10/250M 77 LT10/30M 77 LT10/50M 77 LT13/10M 77 LT13/150M 77 LT13/30M 77 LT13/50M 77 LT16/10M 77 LT16/30M 77 LT16/50M 77 LT20/100M 77 LT20/10M 77 LT20/30M 77 LT20/50M 77 LT23/50M 77 LT25/10M 77 LT25/30M 77 LT25/50M 77 LT36/25M 77 LT48/25M 77 LT5/100M 77 LT7/100M 77 LT7/10M 77 LT7/25M 77 LT7/400M 77 LT7/50M 77 LTIT 77 LY-700F 100 M

127

59 ES1 15 ES2 15 ES5 15

59 ET35 101 F F0560 101

62 g

105

quikcrimp.com.aucarroll.com.au

MAF10

MAF15

MAF20

MAF25

MAF3

MAF30

MAF5

MAF7.5

MF10E 109

MF10E-BK 109

MF10E-BL 109

MF10E-GN 109

MF10E-RD 109

MF10E-YL 109

MF18E 109

MF18E-BK 109

MF18E-BL 109

MF18E-GN 109

MF18E-RD 109

MF18E-YL 109

MF23E 109

MF23E-BK 109

MF23E-BL 109

MF23E-GN 109

MF23E-RD 109

MF23E-YL 109

MFS0/10 109

MFS0/18 109

MFS0/23 109

MFS1/10 109

MFS1/18 109 MFS1/23 109 MFS2/10 109 MFS2/18 109 MFS2/23 109 MFSCT 109 MG12LN

MG16LN

MG20LN

MG25LN

MG32LN

MG40LN

MG50LN

MG63LN

MG63LN-S

NC20/DB

NC25

NC25/DB

QCF2-6

QCF2-6F 16 QCF2-6F90

QCF2-6P

QCF2-8

MRCB30A

PSV1

PSV2

PSV5

PVC10

PVC16

PVC19

PVC4

QCF5-6 16 QCF5-6F 16 QCF5-6P 17 QCF5-9 16 QCM1-6 17 QCM1-6F 17 QCM2-6 17 QCM2-6F 17 QCM5-6 17 QCU10-10 25 QCU10-5 25 QCU10-6 25 QCU10-8 25 QCU16-10 25 QCU16-10/90 27 QCU16-12 25 QCU16-6 25 QCU16-8 25 QCU16-8/90 27 QCU25-10 25 QCU25-10/90 27 QCU25-12 25 QCU25-6 25 QCU25-8 25 QCU25-8/90 27 QCU35-10 25 QCU35-10/90 27 QCU35-12 25 QCU35-6 25 QCU35-8 25 QCU35-8/90 27 QCU50-10 25 QCU50-10/90 27 QCU50-12 26 QCU50-12/90 27 QCU50-6 25 QCU50-8 25 QCU50-8/90 27 QCU70-10 26 QCU70-10/90 27 QCU70-12 26 QCU70-12/90 27 QCU70-6 26 QCU70-8 26 QCU70-8/90 27 QCU95-10 26 QCU95-10/90 27 QCU95-12/90 27 QCU95-6 26 QCU95-8 26 QCU95-8/90 27

QK2 85 QK2A 85 QK2ASL 85 QK2B 85 QK2BSL 85 QK3 85 QK3AL 85 QK3ASL 85 QK3BL 85 QK3BSL 85 QK4 85 QK4AL 85 QK4ASL 85 QK4BLT 85 QK4BSL 85 QK6 85 QK6AL 85 QK6ASL 85 QK6BLT 85 QK6BSL 85 QK8 85 QK8AL 85 QK8ASL 85 QK8BLT 85 QK8BSL 85 QKC01 13 QKC02 13 QKC03 13 QKC04 13 QKC05 13 QKC06 13 QKC07 14 QKC08 14 QKC09 14 QKC10 15 QKC11 14 QKC12 16 QKC13 16 QKC14 17 QKC15 17 QKC16 16 QKC17 17 QKC18 17 QKC19 16 QKC20 13 QKC21 13 QKC22 13 QKC23 13 QKC24 13 QKC25 13 QKC26 13 QKC27 14 QKC28 14 QKC29 14 QKC30 15 QKC31 14 QKC32 16 QKC33 17 QKC34 17 QKC35 16 QKC36 17 QKC37 17 QKC38 13 QKC39 13 QKC40 13 QKC41 13 QKC42 13

QKC43 13 QKC44 16 QKC45 14 QKC46 14 QKC47 14 QKC48 15 QKC49 14 QKC50 16 QKC51 16 QKC52 16 QKC55 16 QKC56 17 QKC57 17 QKC58 16 QKC59 15 QKC60 15 QKC61 15 QKC62 16 QKC63 15 QKC64 17 QKC65 17 QKC66 16 QKC67 16 QKC69 16 QKC70 16 QKC71 15 QKC72 16 QKC76 16 QKC77 16 QKC78 16 QKC87 17 QKCN18 17 QKCN37 17 QL1 87 QL1A 87 QL1B 87 QL2 87 QL2A 87 QL2B 87 QLMAF10 61 QLMAF15 61 QLMAF20 61 QLMAF25 61 QLMAF30 61 QLMAF5 61 QLMAF7.5 61 QTBFH 62 QTPBB 36 QTPBR 36 QTPLER 36 QTPREB 36 QTPRER 36 QUIK-KIT 104 QUIK-KIT/P 104 QWF1-6F 21 QWF2-6F 21 QWF5-6F 21 QWM1-6 21 QWM2-6 21 r R1-3.5 18 R1-4 18 R1-5 18 R1-6 18 R2-10 18 R2-3 18 R2-4 18

INDEX

50 MNL 34 MPL 34 MRCB10A 64 MRCB20A 64

64 MRCB40A 64 MS5349N 34 MS5350P 34 MT-4BV 92 n NBSC1 14 NBSC2 14 NBSC5 14 NC08 55 NC08/DB 55 NC10 55 NC10/DB 55 NC12 55 NC12/DB 55 NC16 55 NC16/DB 55 NC20 55

55 NC28 55 NC32 55 NC40 55 NC50 55 NL06 94 NL12 94 NL18 94 NO.15 51 p PB18 101 PBFKIT 104 PBQKIT 105 PBTKIT 103 PFH3AG 62 PM143 70 PM143B 70 PRBC 93 PS1 73 PS2 73 PS3 73 PS4 73 PS5 73 PS6 73 PS7 73 PS8 73 PS9 73 PSU2 18 PSU5 18

78 PVC12 78

78 PVC5 78 PVC6 78 PVC7 78 PVC8 78 PVCTBK 51 PVCTBL 51 PVCTG/Y 51 PVCTMIX 51 PVCTOR 51 PVCTRD 51 PVCTW 51 Q QCF1-3/5 16 QCF1-3/8 16 QCF1-5/5 16 QCF1-5/8 16 QCF1-5F 16 QCF1-5F/8 16 QCF1-6 16 QCF1-6F 16 QCF1-6F90 16 QCF1-6P 17 QCF2-3/5 16 QCF2-3/8 16 QCF2-5/5 16 QCF2-5/8 16 QCF2-5F/5 16 QCF2-5F/8 16

QF10BK 75 QF13BK 75 QF19BK 75 QF3BK 75 QF6BK 75 QHT194B 70 QK1 85 QK1A 85 QK1ASL 85 QK1B 85 QK1BSL

indeX

R2-5 18

R2-6 18

R2-8 18 R5-10 18 R5-4 18 R5-5 18

R5-6 18 R5-8 18 RC1-10 13 RC1-3 13 RC1-3.5 13 RC1-4B 13

RC1-5 13 RC1-6 13 RC1-8 13 RC2-10 13 RC2-12 13 RC2-3 13 RC2-3.5 13 RC2-4B 13 RC2-5 13 RC2-6 13 RC2-8 13 RC5-10 13 RC5-12 13 RC5-3.5 13 RC5-4 13 RC5-5 13 RC5-6 13 RC5-8 13 REL2512 93 REL2524 93 RG5859 98 RK12-08-CA 57 RK16-08-CA 57 RK16-12-CA 57 RK20-08-CA 57 RK20-12-CA 57 RK20-16-CA 57 RK25-12-CA 57 RK25-16-CA 57 RK25-20-CA 57 RK28-12-CA 57 RK28-16-CA 57 RK28-20-CA 57 RK32-20-CA 57 RK32-25-CA 57 RK32-28-CA 57

RL7700 97 RP12 60 RP13 60 RP16 60 RP22 60 RP25 60

RT300B 70

RV1-10 13

RV1-3.5 13

RV1-4 13

RV1-5 13 RV1-6 13

RV1-8 13 RV2-10 13

terms & COnditiOns

RV2-12 13 RV2-3 13 RV2-3.5 13 RV2-4 13 RV2-5 13 RV2-6 13 RV2-8 13 RV5-10 13 RV5-12 13 RV5-3.5 13 RV5-4 13 RV5-5 13 RV5-6 13 RV5-8 13 RW1-3.5 20 RW1-4 20 RW1-5 20 RW1-6 20 RW2-10 20 RW2-3.5 20 RW2-4 20 RW2-5 20 RW2-6 20 RW2-8 20 RW5-10 20 RW5-12 20 RW5-4 20 RW5-5 20 RW5-6

RW5-8

S1-3

S1-4

S1-5

S2-3.5

S2-4

S2-5

S5-5

S5-6

SC5-5

SC5-6

SCB120-10

SCB120-12 29 SCB120-8 29 SCB150-10 29 SCB150-12 29 SCB150-8 29 SCB185-10 29 SCB185-12 29 SCB240-10 29 SCB240-12 29 SCB300-10 29 SCB300-12 29 SCB35-6 29 SCB35-8 29 SCB50-10 29 SCB50-6 29 SCB50-8 29 SCB70-10 29 SCB70-6 29 SCB70-8 29 SCB95-10 29 SCB95-8 29 SD100100 78 SD10060 78 SD2525 78 SD2530 78 SD2540 78 SD2550 78 SD2560 78 SD2575 78 SD4040 78 SD4060 78 SD4080 78 SD5050 78 SD5075 78 SD6040 78 SD6060 78 SD6080 78 SD7575 78 SD8060 78 SD8080 78 SDLID100 79 SDLID25 79 SDLID40 79 SDLID50 79 SDLID60 79 SDLID70 79 SDLID75 79 SDLID80 79 SEALIT-KIT 103 SFE14 62 SM194B 69 SSCT1200HD/316-10 71 SSCT200/316 71 SSCT200/316P 71 SSCT200HD/316

SSCT360/316

SSCT360/316P

SSCT360HD/316

SSCT520/316

SSCT520HD/316 71 SSL110 115 SSL130 115 SSL70 115 SSL90 115 SSPC10 74 SSPC10/50 74 SSPC13 74 SSPC13/50 74 SSPC16 74 SSPC16/50 74 SSPC19 74 SSPC19/50 74 SSPC25 74 SSPC25/50 74 SSPC29 74 SSPC29/50 74 SSPC32 74 SSPC32/50 74 SSPC38 74 SSPC38/50 74 SSPC44 74 SSPC44/50 74 SSPC55 74 SV1-3 14 SV1-3.5 14 SV1-4 14 SV1-5 14 SV2-3 14 SV2-3.5 14 SV2-4 14 SV2-5 14 SV5-3.5 14 SV5-4 14 SV5-5 14 SV5-6 14 SW1-3.5 21 SW1-4 21 SW1-5 21 SW2-3.5 21 SW2-4 21 SW2-5 21 SW5-5 21 SW5-6 21 SY175 95 SY350 95 SY50 95 t TPC16 56 TPC20 56 TPC28 56 TPE13B 36 TPE13R 36 TPE16B 36 TPE16R 36 TPS13B 36 TPS13R 36 TPS16B 36 TPS16R 36 TS KIT 92 u

UC0.5 73 UC0.5B 73 UC0B 73 UC1 73 UC1.5B 73 UC1B 73 UC2B 73 UC3B 73 UC4B 73 UC5B 73 UC6B 73 UC7B 73 UC9B 73 UNISTRIPPER 100 v V12-2280 72 V25-2280 72 W WGFH 62 WMRCB10A 64 WMRCB15A 64 WMRCB20A 64 WMRCB25A 64 WMRCB30A 64 WPC1 15 WPC1/12 15 WPC2 15 WPC2/12 15 WPC5 15 WPKIT 104 WPV1 15 WPV1/12 15 WPV2 15 WPV2/12 15 WPV5 15 WSBFH 62 y YAC4 97 YAC5 97 YAC6 97 YAC7 97 YPS080808-HX 58 YPS120808-HX 58 YPS121212-HX 58 YPS161208-HX 58 YPS161212-HX 58 YPS161608-HX 58 YPS161612-HX 58 YPS201208-HX 58 YPS201212-HX 58 YPS201612-HX 58 YPS201616-HX 58 YPS202012-HX 58 YPS202016-HX 58 YPS252016-HX 58 YPS252512-HX 58 YPS252516-HX 58 YPS252520-HX 58 YPS252525-HX 58 YY319 100 YYT6 101

Carroll’s products are sold with the understanding that the buyer will determine for themselves their suitability to their intended uses. Carroll warrants to the buyer that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Carroll’s satisfaction to have been defective at the time Carroll sold it. This warranty does not extend to any persons obtaining the product from the buyer. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty or merchantability or fitness for a particular purpose, and of any obligations or liability on Carroll’s part. Under no circumstances will Carroll be liable for any loss, damage, expense or consequential damage of any kind arising in connection with the use, or inability to use Carroll’s products. *Goods shipped to locations outside Metropolitian areas may experience slight delays.

129

20 s

18 SB08 49 SB10 49 SB13 49 SB16 49 SB19 49 SB22 49 SB26 49 SB30 49 SB38 49 SB45 49 SB50 49 SBFH 62 SC1-3 14 SC1-3.5 14 SC1-4 14 SC1-5 14 SC2-3 14 SC2-3.5 14 SC2-4 14 SC2-5 14 SC5-3.5 14 SC5-4 14

quikcrimp.com.aucarroll.com.au

nOtes quikcrimp.com.aucarroll.com.au

131quikcrimp.com.aucarroll.com.au

ELECTRICAL COMPONENTS & WIRE ACCESSORIES Carroll Australasia is a division of Brady Australia and has a policy of continuous development, therefore we reserve the right to change specifications without notice. All content in this catalogue is correct at the time of publication. © Copyright 2022. Carroll Australasia PTY LTD A.B.N 48 009 986 109 NSW 2 Bellevue Circuit Greystanes 2145 WA 959 Abernethy Road High Wycombe 6057 Free Call 1800 777 458 quikcrimp.com.aucarroll.com.au