Satellite Not Syncing
1. Check the Compatibility of Your Orbi Satellite and Router
Firstly, it is important to understand that not every satellite from Orbi will be compatible with every router from Orbi Although many extenders will work with most routers, it is simply not an absolute rule As it goes, routers have several satellite devices they can be synced with, and should you attempt to connect an extender that is not among those compatible, you will very likely not get the outcome you can expect It is also necessary to check the compatibility of your Orbi satellite and router
2. Properly Complete the Setup Of Orbi Satellite
Your extender system will not work properly if the satellites and router are not properly configured. Ensure that satellites and routers have been correctly configured. Check to see whether the devices are connected through an Ethernet cable or wirelessly. Make sure your router and satellite are connected correctly and check the settings.
The connection can be performed by pressing the sync button on both devices at the same time. The distance between the router and the extenders is crucial to the satellites syncing, so if the router is too far from the extenders, syncing may not occur.
3. Reset Your Orbi Satellite
There is a temporary file storage system on many electronic devices, routers, and satellites It means the satellite will store some information in its system to get a faster sync the next time you connect to the router Files of other types may also get stored in the satellites' memory, leading to a 'no room to run' condition It is easy to get rid of these unwanted or unnecessary files by simply resetting the device To reset the Orbi satellite, find the reset button at the bottom
find out more at:
www.orbihelpline.com