4 MAIN STEPS INVOLVED IN A SEPTIC TANK INSTALLATION By SEPTIC BLUE

4 MAIN STEPS INVOLVED IN A SEPTIC TANK INSTALLATION

By SEPTIC BLUE

When installing a septic tank, it’s important to have the skills and experience required to get the task done. If you feel you are capable of following through the steps to installing a septic tank successfully, then this article mentions four main steps in the septic tank installation. If you feel you are incompetent for this job, call a septic tank company like Septic Blue to send in professionals for the installation or septic pumping in Woodstock GA.

Prepare and Dig the Hole Before installing the septic tank, make sure to inspect the tank for damage.

Tanks will have been completely tested and checked prior to being dispatched to you, yet it is entirely expected for them to become harmed during transportation and offloading. Try to completely investigate the tank when it shows up. When the tank is introduced, most producers will not acknowledge claims for harm. You should also check to see if you have the correct invert depths.

Once you’ve inspected your tank and are happy with the delivery, there are a few more things to check. Read the installation guide, make sure you have the Building Regulations approval, ensure the consent of discharge has been received, and have a pump available for a clean excavation. Next, dig your hole.

Ensure that the hole you dig is huge enough for both the tank and any suggested inlay. If it's not too much trouble, guarantee that you follow the producer's detailed safety and security rules that will be given in the manual while digging your hole.

Install the Base and Sit the Tank Your tank will require a strong base to sit on (most frequently a substantial one) to guarantee security and stay away from pointless pressure being put upon it during activity. The manufacturer's establishment guide provided with your tank will teach you further about the best sort of base and how thick it should be. Start to lower the tank into the hole, making sure the tank is level and the input and output ports are accurately aligned.

Backfill the Hole & Install a Septic Drainage Field The tank needs to be secured in place with a backfill once it’s placed down. Usually, concrete, gravel, or sand is used, but follow what the manufacturer recommended for you.

Next, lay down the pipes for your drainage field.

Connect the Pipes & Fill the Manhole Covers This should be a clear errand if everything has been executed properly, however, a professional and experienced technicians from a septic company should be called if you're in any way uncertain. Once you’ve filled the manhole covers, the septic tank installation should be completed. If you need septic pumping in Atlanta then you can contact Septic Blue for services.

Source: https://www.septicblue.com