FPG Catalog

Delivering Solutions for Industrial & Utility Applications for Over 70 Years

FPG.CO

NEW PRODUCTS

NOTEWORTHY INNOVATIONS

Badger Meter HR-LCD 4-20 Scaled/Unscaled Transmitter Register

Badger Meter Mag Meter Zero Upsteam/Downstream Requirements

Badger Meter Cox Exact Turbine Flow Meters 120-500:1 turndown, +/- 0.10% accuracy

Badger Meter DXN Portable Hybrid Ultrasonic Flow Meters

Badger Meter VN2000 Compact Direct Insertion Flow Meter

RTK Quick Change Seat and Balanced trims

Schroedahl Severe Service Control Valves – Types DR, AC, AK/BK, AV/BV, AVC

RCV Low Flow Globe Valves

Schroedahl Type DKV Desuperheater and Type DU Steam Conditioner

Schroedahl SUL, TDL, TDM & MRK Pump Protection Valves

RTK Advanced Electric Actuators including Power Off Positioning (PoP) super-capacitor

Kelvion Plate & Frame, Brazed and Welded Heat Exchangers Many new plate designs

Kelvion Air Fin Coolers – Flexible Innovative (Groovy Fins, DIESTA, Seals/Sleaves/Liners)

Kelvion Polacel Modular Open-Circuit Tower Design

Kelvion Tundracel Modular Closed Counter Current Evaporative Process Cooler

Kelvion Desublimator Product Separation

CONTACT US FOR MORE INFORMATION!

855.FREW.PRO

LJ Wing MV Coils – Multi-Stage and Multi-Header for VAV Systems

CONTENTS Flow Meters • • • • • • •

Positive Displacement Registers Turbine Flow Meters Impeller Electromagnetic Coriolis Flow Metering Analytics

2 • • • • • • •

Differential Pressure Meters Ultrasonic Flow Meters Vortex Insertion Flow Meters Batch Controllers and Flow Computers Open Channel Thermal Dispersion

Control Valves • • • • • • • • • • • • • • • •

General Service Globe Control Valves Severe Service Ball Valves General Service Ball Valves Manual Linear Valves Segmented Ball Sanitary Automatic Recirculation Valves Three Way Low Flow Globes Steam Desuperheaters Steam Conditioners Automatic Recirculation Valves On/Off and Solenoid Pressure Drop and Noise Attenuation Dampers and Butterfly Valves Actuators and Positioners

10 • • • • • • • • • • • • • • •

Pneumatic Actuator Models Electric Actuator Models Direct-Operated Regulators Pilot-Operated Regulators Water Heaters Air Pressure Regulators Back Pressure Regulators Pressure Transducers Pneumatic Air Filters Pneumatic Volume Boosters Diaphragm Air Cylinders Air Relays Liquid Level Measurement Valve Positioners Gauges & Accessories

Heat Exchangers • • • • • • • •

• Gasketed Plate Heat Exchangers • Brazed Plate Heat Exchangers • Welded Plate Heat Exchangers • Rekuluvo / Rekugavo Thermal Engineered Solutions (TES BU) • Air Fin Coolers Air Dryer & Preheater / Economizer Gas Liquid HX (Recuperator) & Economizer

24 Cooling Towers Desublimator Printed Circuit Heat Exchangers Air Cooled Condenser Shell & Tube Process (Double Wall)

FLOW METERS POSITIVE DISPLACEMENT Industrial Gear Flow Meters Industrial gear flow meters are designed for a variety of chemical applications including petroleum based fluids, water solutions and any other liquid compatible with the materials of construction.

Industrial Handheld Meter

Nutating Disc Nutating disc meters are the most common and accurate type of positive displacement meters. The simple and reliable operating principle allows water to flow into the chamber, which causes the disc to nutate.

REGISTERS

Unscaled Pulse Transmitters • PEPT-1 (High Resolution, Plastic Housing) • PFT-2 (Reed Switch, Plastic Housing) • FT-2XP (Bronze Housing, CSA) • RST (Reed Switch, Plastic Housing) • RST-6P (Reed Switch, Plastic Housing, NEMA 6P) • PFT-2E (Electronic, Plastic Housing) Scaled Pulse Transmitters • PFT-1E (Electronic, Plastic Housing) Scaled Pulse Transmitters w/ Register • RTR (Piezo, Plastic Housing, Register) Scaled Analog (4-20mA) Transmitters • PFT-420 (Pulse & 4-20 mA, Plastic Housing) • RST-420 (Pulse & 4-20mA, Plastic Housing) Mechanical Registers • RCDL (Non-Resettable Totalizer, 120° F Max) • RCDL (Non-Resettable Totalizer, 250° F Max) Electronic Registers • ER-6 SINGLE (Counter) • ER-9 SINGLE (Scaleable Rate/Flow Counter, Scaled Pulse) • ER-9 SINGLE w/ 4-20 mA (Scaleable Rate/Flow Counter, Scaled Pulse) • ER-420 (Scaleable Rate/Flow Counter w/ 4-20 mA, 115…230V AC) • ER-420 (Scaleable Rate/Flow Counter w/ 4-20 mA, 24V DC) • ER-420 (Scaleable Rate/Flow Counter w/ 4-20 mA, LOOP POWERED) High Resolution Electronic Registers/Transmitters • HR-LCD Pulse Scaled • HR-LCD 4-20 Scaled/Unscaled

Controllers • PC-200 Panel-, Wall- or Meter-Mount (Process Controller, Pulse Output)

2

B1750 Positive Displacement Meter

TURBINE FLOW METERS Recordall Turbo Series Meters The Industrial Turbine Meter is a rugged, reliable meter ideally suited for industrial fluid applications. Its compact size and ease of serviceability without removal from the line make this a cost effective selection. Designed with performance in mind, the meter provides a high level of accuracy over a wide flow range with a minimum of pressure loss.

Vision Turbine Flow Meter Suitable for measuring low-viscosity, aggressive and non-aggressive liquids alike.

• Compact size • Measurement in any meter orientation Industrial Turbo This meter is ideally suited where continuous service and minimal maintenance are required.

• Long lasting ceramic bearings • Simple inline serviceability • Low pressure loss

Model 1100 Turbine Flow Meter The Model 1100 turbine flow meter is the ideal meter for liquid flow measurement both on and off the oilfield.

QuikSert® In-line Turbine Flow Meter The Blancett QuikSert® In-line turbine flow meter provides the high accuracy and rigorous design of the standard Blancett turbine, but in a wafer-style mounting configuration.

FloClean Sanitary Turbine Flow Meter The Blancett FloClean sanitary turbine flow meter provides the high accuracy and rigorous design of the standard Blancett turbine in a sanitary-style tri-clamp mounting configuration.

Sales@FPG.co

TURBINE

ULTRASONIC

B1500 Turbine Flow Meter Blancett B1500 turbine flow meters have exceptional mechanical linearity, resulting in minimizing, or negating, temperature induced viscosity influence.

Model 1200 In-line Turbine Flow Meter Engineered for applications in high corrosive environments. Developed for use in petrochemical and other process industries with liquid chemical flows.

900 Series Flow Meter Rugged, low-priced and specifically designed to measure floodwater line flow in secondary oil recovery operations. Using time-proven rotary vane and multi-jet impeller mechanisms.

Blancett flow monitors offer advanced digital signal processing technology in an easy-to-access package. These flow monitors process frequency output from a flow sensor and interpret the signal to calculate flow rate, total flow and batch flow.

B2900 Flow Monitor B3000 Series Flow Monitor B3100 Series Flow Monitor

Precision Turbine Meters Unprecedented mechanical linearity, resulting in minimizing, or negating, temperature-induced viscosity influence.

Gas Turbine Meters Cox Precision Gas Flow Meters are designed for precise and repeatable flow measurement.

Exact Turbine Meters Hydraulically coupled helical dual rotor design provides exceptional performance and many unparalleled benefits.

LoFlo Turbine Meters Designed to provide exceptional repeatability and speed of response when measuring very low flow rates.

IMPELLER

Impeller products are used to measure liquids in a variety of industrial and commercial markets. These solutions comprise data acquisition and data management products including sensors, monitors and transmitters.

• 228 & 250 Series – Metallic Tee Type Flow Sensor

• 310 Series Analog Transmitter

• 225 & 226 Series Hot Tap Flow Sensor

• 320 Series Pulse Transmitter

• 220 Series Insertion Style Flow Sensor

• 330 Series Relay Transmitter

• SDI Flow Sensor

• 340 Series BTU Transmitter

• 380 Series BTU System Meter

• BacNet/ModBus

• 228PV PVC Tee Industrial Flow Sensor

• LonWorks

• 4000 Series Flow Sensor

• Metasys

We offer a large selection of quality, accurate and affordable flow meters.

3

FLOW METERS ELECTROMAGNETIC

ModMAG M-Series Whether it’s improving accuracy, decreasing system maintenance or meeting the demands of challenging liquid conditions, Badger Meter Electromagnetic Meters deliver the performance your critical flow measurement applications require. Our electromagnetic flow meters are designed to achieve ± 0.25 percent accuracy. In addition, the non-intrusive, completely open flow tube design virtually eliminates pressure loss. With no moving parts to impede the flow stream, maintenance is kept to a minimum, even in less than ideal fluid conditions.

• M1000 Electromagnetic Flow Meter • M2000 Electromagnetic Flow Meter • M3000 Electromagnetic Flow Meter • M4000 Electromagnetic Flow Meter • M5000 Electromagnetic Flow Meter • M7600 Electromagnetic Flow Meter

CORIOLIS RCT1000 The Badger Meter RCT1000 Coriolis mass flow meter simultaneously measures true mass flow and density reading. The Coriolis meter identifies flow rate by directly measuring fluid mass over a wide range of temperatures with a high degree of accuracy. For fluids consisting of two liquids or a liquid with suspended solids, it can derive the concentration and mass of each fluid based on the density measurement.

• Unobstructed open-flow design • Low-maintenance operation with no free-moving parts • Modbus RTU, HART, Modbus TCP/IP, EtherNet/IP network options

FLOW METERING ANALYTICS

AquaCUE Flow Measurement Manager A simple yet powerful end-to-end solution, the AquaCUE® Flow Measurement Manager combines an intuitive software suite with proven flow measurement technology and leverages cellular network infrastructure to deliver a simple yet powerful dashboard solution for improving management of the use of water throughout your property, including domestic hot and cold water, irrigation systems, recreational use, tenant sub-metering, HVAC systems, and more.

Wireless Connectivity • AquaCue Flow Management Manager • 350T 900 MHz RF Transmitter • 350R 900 MHz RF Receiver Wireless Sensors • Model 345WT Network Transceiver • Model 3700 Data Acquisition Server

4

Sales@FPG.co

DIFFERENTIAL PRESSURE

Ellipse Pitot Tube Sensors The Ellipse Pitot tube flow meter is a primary flow sensor designed to produce a differential pressure that is proportional to flow. Its patented elliptical shape provides the lowest pressure loss in the industry.

The Ellipse flow meter is designed with a series of ports facing the upstream velocity pressures and flow sensing ports strategically located ahead of the trailing edge flow separation. The Ellipse is capable of highly accurate, precise flow measurements that are proportional to the actual flow rate to 24 inch Pitot tube meter for liquids and gases.

• Ellipse AR Annular Flow Meter • Ellipse AF Annular Flanged Flow Meter • Ellipse AS Annular Steam Flow Meter • Ellipse ASF Annular Flanged Steam Flow Meter • Ellipse AHR Annular Wet Tap, Low Pressure Flow Meter

• Ellipse AHL Annular Flow Hot Tap, High Pressure Flow Meter • Ellipse AHS Annular Hot Tap, Steam Flow Meter • Ellipse AHF Annular Flanged, Hot Tap Flow Meter • Ellipse AHZ Annular Flanged, Hot Tap Steam Flow Meter • Ellipse Model BHL Annular Hot Tap, Dual Rod Flow Meter

Venturi Flow Meters The CV Venturi Flow Meter is a differential pressure element designed to accurately measure the flow of liquids and gases by forcing the flow into a smaller diameter section of pipe, then measuring the pressure differences between the unrestricted flow and the restricted flow. It can be installed in any position with minimal straight pipe requirements (5 pipe diameters upstream and 2 pipe diameters downstream).

• CV Series Venturi Flow Meter • V-Brass Series Venturi Low Pressure Loss Flow Meter • Model SSL Venturi Classic Flow Meter • Model SSM Venturi Nozzle Flow Meter

• Model LPL Venturi Low Pressure Loss Flow Meter • Model VILPL Venturi Low Pressure Loss, Insert Flow Meter • Model VISSL Venturi Classical, Insert Flow Meter • Model VISSM Venturi Nozzle, Insert Flow Meter

COIN Flow Meters The Preso COIN wedge wafer flow meter accommodates most flows, even the most abrasive. This compact DP flow meter is streamlined for easier installation due to the narrow face-to-face, creating the lowest installed cost compared to other end connections. This type of wedge meter is effective with clean fluids, gas and steam applications.

• COIN Wedge Wafer (Model NW) Flow Meter • COIN Flanged with NPT Pressure Taps (Model NF) Flow Meter • COIN Back-to-Back Wedge (Model NN) Flow Meter • COIN Wedge, Flange Process by Flange Instrumentation (Model FF) • COIN Butt Weld Wedge (Model NB) Flow Meter • COIN Wedge, Flanged with Chemical-Tee Pressure Taps (Chem)

Cone Flow Meter The Cone differential pressure flow meter has a cone-shaped element that shapes the flow profile ahead of the differential pressure (DP) measurement port without impacting the flow against a sharp surface, creating an extremely stable signal for measurement with minimal wear on the cone edge.

Wyatt Engineering Orifice Plates

We offer a large selection of quality, accurate and affordable flow meters.

5

FLOW METERS ULTRASONIC DXN Portable Hybrid Ultrasonic Flow Meters The Dynasonics DXN meter is a powerful tool for troubleshooting flow issues, whether you want to quickly verify the flow reading of another meter or to data log flow system values over an extended time period. The DXN portable meter has transducers that clamp onto the outside of the pipe—no tapping or cutting is required. The meter can be easily moved and installed in different locations.

• Quickly install and setup • Measure a wide variety of fluids • Capture multiple variables over several days • View and archive data log files on a computer

TFX-5000 Ultrasonic Clamp-on Flow Meter TFX-5000 ultrasonic clamp-on meters are quickly and easily installed without cutting or tapping the pipe. Ultrasonic waves transmit upstream and downstream through the pipe wall and water flowing in the pipes. By measuring the difference in the travel time and knowing the pipe size, the meter determines the velocity and flow rate.

Accuracy up to 48” ID.

TFX-500w Ultrasonic Clamp-on Flow Meter The TFX-500w ultrasonic clamp-on flow meter is quickly and easily installed without cutting or tapping the pipe. Ultrasonic waves transmit upstream and downstream through the pipe wall and water flowing in the pipes. Specifically designed for water applications. Up to 10” ID accuracy to1%.

Figure 1: SoloCUE diagnostics screeen

Figure 1: SoloCUE setup screen

DFX Doppler Ultrasonic Flow Meters The DFX ultrasonic Doppler flow meter measures flows of liquids containing suspended particles or aerated liquids. The suspended particles must reflect ultrasonic energy. The DFX flow meter operates by transmitting ultrasonic waves into the flow stream and measuring the frequency shift of the reflected wave.

The meter’s clamp-on design allows quick and low-cost installation, and eliminates worries of fluid compatibility and pressure head loss. With no moving parts, there is no mechanical wear, so repair kits or replacement parts are not needed.

• Measures liquids containing suspended reflectors • Non-intrusive, clamp-on transducers for most pipes • Flexibility: with automatic gain control and in-field linearization • Wide velocity range

6

Sales@FPG.co

VORTEX

Vortex flow meters are suitable for measuring steam as well as a variety of liquids and gases. As fluid moves across a vortex meter shedder bar, vortices form. The frequency of the vortices shedding is proportional to the fluid velocity.

VN2000 Hot Tap Insertion Flow Meter The VN2000 Hot Tap Insertion Vortex Flow Meter measures the volumetric or mass flow rate of steam, gases or liquids over a large flow range.

• Reliable measurement for steam and a variety of fluids • Reduce replacement inventory, maintenance cost, and spare parts

VN2000 Compact Direct Insertion Flow Meter The meter is a heavy duty design engineered to stand up to the most abusive environments inside and outside the pipe. The meter includes a mounting assembly to simplify the installation and ensure proper installation depth and orientation for a specified pipe size.

• Measure volumetric flow, mass flow with tempcompensation or BTU/energy • Durable stainless steel design • Mounting kit for proper installation • No moving parts to wear

RVL Series Meter The RVL series meter uses vortex-shedding technology has no moving parts, and any potential for fluid contamination is eliminated by the corrosion-resistant all-plastic construction. The meter includes a compact two-wire (4…20 mA) or three-wire pulse transmitter, contained within a conveniently replaceable plug-in electronics module.

BATCH CONTROLLERS AND FLOW COMPUTERS PC200 Process Controller The Badger Meter PC200 is a microprocessor-driven instrument designed for batching and filling both small and large quantities, as well as displaying total, accumulated total and flow rate.

Designed to interface with our complete line of industrial flow meters, it totalizes, indicates and controls fluid flows. Many years of experience in the industrial market has allowed Badger Meter to incorporate features indispensable in the liquid batching and control operations.

FC-5000 Flow Computer The FC-5000 Flow Computer is a microprocessor-driven device designed for flow monitoring. The FC-5000 is designed to be compatible with the complete line of Badger Meter industrial flow meters, creating a solution to provide totalization of flows, instantaneous rate of flow and total energy consumed, simultaneously, while conforming to EN 1434 calculation standards. Many years of experience in the industrial market has allowed Badger Meter to incorporate features indispensable in control operations.

We offer a large selection of quality, accurate and affordable flow meters.

7

FLOW METERS OPEN CHANNEL

iSonic 4000 Open Channel Flow Meter An economical open channel flow meter, iSonic 4000 measures level, flow rate and total volume of water flowing through weirs and flumes. The meter includes a non-contact ultrasonic level sensor to detect the water level and then calculates the flow rate and volume using the Manning equation and characteristics of the channel.

IS-6000 Doppler Area Velocity Flow Meter For partially filled pipes and open channels without a primary device, the IS-6000 flow meter directly measures flow velocity, level and temperature with a single submerged sensor.

Palmer-Bowlus Flume 4" Thru 42" Diameters available. All flumes are fabricated on molds to ensure exact tolerances and dimensions.

• Parshall Flumes • H Flumes • Trapeziodal Flumes

ACCURON Model 7750 Area-Velocity Flowmeter Systems Each Accuron 7750 system utilizes single or multiple path acoustic transit-time technology capable of realizing highly accurate flow measurements under the most difficult metering conditions.

ACCURON Crossfire Billing Meters Sewer Billing Meters are the cash registers of wastewater treatment plants.

ACCURON Model 7100 Single Range Open Channel Cartridge Meters The Accuron 7100 Cartridge Meter is a factory integrated unit, designed for open channel flow measurement. The revolutionary design combines a trapezoidal flume section and the ultrasonic height sensor in a stainless steel cartridge.

ACCURON 7200 Cartridge Flow Meter, Permanent: Dual Range ACCURON 7400 Cartridge Flow Meter, Permanent: Extended Range ACCURON 7500 Cartridge Flow Meter, Permanent: Full Pipe Measurement

THERMAL DISPERSION

ST Series Flow Meters The ST100 series transmitter is unsurpassed in meeting your current and future need for outputs, process information and communications. Whether your output needs are traditional 4-20 mA analog, frequency/pulse, or advanced digital bus communications such as HART, Foundation fieldbus, PROFIBUS, or Modbus, ST100 has you covered.

• ST50 • ST51/ST51A • ST75 • ST80/ST80L • ST100/ST100L

MT Series Flow Meters The ST100 series transmitter is unsurpassed in meeting your current and future need for outputs, process information and communications. Whether your output needs are traditional 4-20 mA analog, frequency/pulse, or advanced digital bus communications such as HART, Foundation fieldbus, PROFIBUS, or Modbus, ST100 has you covered.

Flow Conditioners VORTAB Flow Conditioners eliminate flow distortions that degrade instrument performance.

The result is accurate, repeatable measurement with minimal pressure loss.

8

•VIP Flow Conditioner •VIS Flow Conditioner •VFK Flow Conditioner •VEL Flow Conditioner •VMR Flow Conditioner

Sales@FPG.co

EXPERIENCED PROFESSIONALS • SUPERIOR SERVICE

Valve and Meter Repair & Calibration Services Valve Automation & Control Products Flow Calibrators, Test Stands & Calibration Services Non-invasive, Ultrasonic Flow Meter Rentals On-site Application Engineering

Repair and Calibration activities are CRITICAL to your system’s operation and each client’s needs are unique.

The Frew Process Group has faithfully supported its clients for over 60 years, providing them the security of steady reliability in their Flow Meters and Valves.

That’s why you can place your trust in the experienced professionals at Frew to keep your plant running at Peak Performance.

Rely on Frew to find the proper instrument for your application and our ability to support it.

Learn more about these services by contacting our Sales Engineers.

855.FREW.PRO Sales@FPG.co www.FPG.co

CONTROL VALVES GENERAL SERVICE GLOBE CONTROL VALVES

10

STEAM-CONVERTING VALVES

MULTI NOZZLE LANCER DESUPERHEATER

CONTROL VALVE FOR WATER INJECTION

FLOW-CONTROL SILENCER

Series MV 5351 / MV 5451 Series PV 6351 / PV 6451

Series MDK 5351/ 5451 Series PDK 6351 / PDK 6451

Series MV 5211

Series SL Typ A for liquid media Series SL TypB for gases and vapours

ELECTRIC CONTROL VALVES WITH FAIL CLOSED UNIT

FEED-WATER CONTROL VALVES WITH RE-CIRCULATION CONNECTION

CONTINUOUS BLOW DOWN VALVES

BOTTOM BLOWDOWN VALVES

Series ST 6151 / ST 6152

Baureihe MV 5291 / MV 5391

Series MV 5291-D / MV 5291 V Series PV 6291-D / PV 6291 V

Series MV 5291-D / MV 5291 V

VALVES FOR DISCHARGE / RE-CIRCULATION CONTROL

HEAVY DUTY CONTROL VALVES

Series MV 5241 / MV 5341 Series PV 6241 / PV 6341

Series MV 5311-AD Series PV 6311-AD

MV 5 Actuator

2 Actuator / Stem Diameter

1 Type of Valve

1 Stem Packing

5: electric (MV)

2: 1.5/3 kN / 12mm 3: 6-10 kN / 12 mm 4: 10-56 kN / 32 mm 9: >56 kN, <80 kN / 60 mm

1: Stuffing Box - PTFE / graphite - Pure graphite - Packing acc. “TA Luft” - Gas packing (acc. To DVGW)

6: pneumatic (PV)

2: <10 kN / 12mm 120/280 cm2 eff. area 3: <10 kN / 12 mm 530 cm2 eff. area 4: <56 kN / 32 mm 1000 cm2 eff. area 9: >56 kN, <80 kN / 60 mm

1: 2-way valve 2: 3-way mixing valve 3: 3-way diverting valve 4: 3-way valve for regulation flow/circulation 5: Steam-converting valve 7: 3-way mixing valve with shortened B-flange 9: Valves for special applications - Continuous blow down valve - Bottom blow down valve - Valve with re-circulation connection

4: Bellows seal - With safety stuffing box - Leakage monitoring

Sales@FPG.co

REflex Trim Designs

REflex Flow Directions

Interchangeable plugs and seats offer maximum versatility in flow control applications.

Flow to Open

2-Way Valves V-Port Characteristic: Linear or Equal Percentage Flow direction: To open or to close Rangeability: 30:1

On/Off Characteristic: On/Off (Quick Opening) Flow direction: To open or to close This plug provides maximum flow with minimum pressure drop and is ideal when large flows are required just after opening.

This plug is ideally suited when actuator selection is critical, and the shorter stroke means smaller actuators can often be used.

Normal flow direction for parabolic plugs

Flow to Close

Parabolic Characteristic: Linear or Equal Percentage Flow direction: To open Rangeability: 30:1 (max 50:1)

Perforated Characteristic: Linear or Equal Percentage Flow direction: To open or to close Rangeability: 30:1 (max 40:1)

This plug provides maximum flow with minimum pressure drop and is ideal when large flows are required just after opening.

The plug is suitable for use where high differential pressures are present. It can also be used where noise is an issue, typically reducing the noise level by 10 dBA.

Quick Change Seat (QCS) 1-Stage Characteristic: Linear or Equal Percentage Flow direction: To open Rangeability: 30:1 (max 50:1)

Quick Change Seat (QCS) 2-Stage Characteristic: Linear or Equal Percentage Flow direction: To close Rangeability: 30:1 (max 40:1)

This trim offers an easy tool-free seat exchange and can be combined with all on/off, parabolic, perforated and V-port plugs.

This trim offers an easy tool-free seat exchange and is used for high differential pressures to prevent cavitationand for noise reduction.ditions

Pressure Balanced, 1-Stage and 2-Stage Characteristic: Linear or Equal Percentage Two-way design 1-stage and 2-stage design Perforated cage and plug All common body materials For high shut-off pressures, high differential pressures and operating temperatures up to 986°F Low leakage Noise reduction

Most commonly used flow direction for On/off, V-port and perforated plugs.

Mixing

3-Way Valves Diverting

Mixing Characteristic: Linear Flow direction: A + B > AB Rangeability: 30:1 (max 50:1) Diverting Characteristic: Linear Flow direction: AB > A + B Rangeability: 30:1

Note – All plugs are available with Soft Seat option, offering Class VI shutoff (Not Diverting)

REflex Packing Configurations

PTFE/Graphite

Bellows Seal

Pure Graphite

Chloroprene

Maintenance free chevron rings with prestressed spring

Maintenance-free metal bellows stem seal with safety packing

Pure graphite rings and two anti-extrusion lnconel wire reinforced graphite rings

Maintenance free chevron rings with prestressed spring

• • • •

• Material: Stainless Steel • Temperature: -76˚F to 662˚F Optional up to 797°F • Pressure: up to CL 300 • Application: Thermal Oil, Ammonia and other media

• • • •

• • • •

Material: PTFE/Graphite Temperature: -76˚F to 482˚F Pressure: up to CL 900 Application: Water, steam and other media

Material: Graphite Temperature: -76˚F to 986˚F Pressure: up to CL 900 Application: Water, steam and other media

We KNOW valves. Call us for application-specific valve sizing and selection.

Material: Chloroprene Temperature: -40°F to 212°F Pressure: up to CL 300 Application: Refrigerants, natural gas and other media

11

CONTROL VALVES SEVERE SERVICE CONTROL VALVES

Type DR – Steam Pressure Reduction • Reduction of steam pressure in energy and process engineering for controlling high pressure • Customized, high-quality steam pressure valve with cage-guided perforated bushing in a single-stage or multi-stage design • For the best handling of difficult operating conditions with high grade pressure control • Low-noise, multi-stage design of the throttle body (perforated bushing) • NPS 2” - 48” (DN 50-1200) • ANSI 150-4500 Pressure Class (PN 16-640) • Temperature to 1200°F (650°C) • Media – Superheated Steam • Angle type & Globe type designs • Up to 9 pressure drop stages (Up to 4 controlled stages) • Operating Range up to 1:50

Type AC - Robust High-Pressure Control Valve • Robust high-pressure control valve with multi-stage axial flow limitation • Cavitation-free, multi-stage vortex plug with an axial flow direction under pressure (“wear free”) • Special material combinations enable complex water mixtures and other media • High Pressure Control Valve for power plant and process industry • Also suitable for high pressure injection control and pump protection for minimum flow control • NPS 1” - 16” (DN 25-400) • ANSI Class 600-4500 (PN 100-640) • Temperature to 536°F (280°C) • Media – Water, Water Mixtures • Angle Type, Globe type and z-type designs • Up to 8 pressure drop stages (all are controlled stages) • Operating Range up to 1:15

Back Pressure Valve (BPV) • New addition • Prevents evaporation and cavitation and ensures smooth operation • Provides necessary backpressure on ARV bypass outlet

12

Sales@FPG.co

Type AK/BK – Straight Through • High pressure control valve, axial throttle body • NPS ½” - 4” (DN 15-100) • ANSI Class 150-4500 (PN 16-640) • Temperature to 536°F (280°C) • Media – Water • Angle Type & Globe type designs • Up to 6 pressure drop stages • Operating Range up to 1:50

Type AVC (aka “Combi”) • 2 Valves in 1 – Boiler Feedwater Startup Control and Main Boiler Feed Control • Best handling of difficult operating conditions w/ extremely high demands on adjustability and high-quality pressure control • Covers wide range • Greater than 500:1 turndown • Forged Material, BWE or Flanges

Type AV/BV • High-quality / high-pressure control valve for power plant and process industry feedwater control.

• Robust Control Valve for Water Applications in single-/multi-stage design as perforated bushing • NPS 2” - 24” (DN 50-600) • ANSI Class 150-4500 (PN 16-600)

SEGMENTED BALL Leslie Controls Aeroflow High Performance Control Valve • 1 – 16” Valve Sizes • ANSI CL 150 – 4500 • Zero Leak Technology • Custom Characterized Cage • Tri-Sheer Protected Seat Design • Hung Cage for Thermal Expansion The unique technology of the Aeroflow begins with aerodynamic vanes cast into the valve body inlet and outlet.

Frew finds product solutions to meet your project requirements. This is our job.

Leslie Controls K-Max Rotary Control Valves • Economical Design • Eccentric Rotary Plug Action • Self-Aligning Orbital Seal • Rangeability • B-Directional Flow Capability

13

CONTROL VALVES STEAM DESUPERHEATERS

SPRAY TYPE DESUPERHEATER Maximum Turndown Ratio of 5:1 Approach to Saturate Temperature 5-7°C

DKV — Traditional DKM — Mini DHK — High T/P

Variable Nozzle Controlled Pressure Injection

• 2”-20” (DN 150 – 500) • ANSI 150-2500 (PN 10-420) • Integrated Water Injection Cooling • Simple Insertion Replacement • Class IV, V Shutoff Available • Rangeability of water 10:1 up to 100:1 • Flanges up to DN 2” for water • EN and ASME materials • PN up to class 2500 (PN 400) • Electric, pneumatic or hydraulic actuator

STEAM ATOMIZING TYPE DESUPERHEATER Offers a Possible Turndown Ratio of 50:1 Approach to Saturate Temperature less than 3°C

Steam Assist Cooler

DKT Steam Assist • Ultimate cooling solution • Low and high pressure design available • Forged material • Multi nozzle design • Rangeability of water up to 100:1 • EN and ASME materials • PN up to class 2500 (PN 400) • 1/2”-40” (DN 15 – 1000) • ANSI 150-12500 (PN 20-250) • Highest Cooling Rangability • Extreme Temperature Reduction • Low Steam Velocity Control • Precise Saturation Control • Flanges up to DN 4” for water and DN 4” for steam assist

14

Sales@FPG.co

STEAM CONDITIONERS

TYPE DU Angle Design

THE STEAM CONVERTING STATION FOR POWER PLANT TECHNOLOGY AND INDUSTRIAL PROCESSES Wherever specific steam conditions and pressures are required for the most demanding steam applications.

Steam Conditioner Steam cooling with the SCHROEDAHL means the following for you: perfect steam conditioning near the saturation temperature, maintenance reduction through low vibration and low noise level of the station, and an extremely short distance to temperature sensor and without additional pipeline protection.

TYPE DU Globe Design

• With steam atomizing steam system e.g. for HP- and LP-bypass stations and also process steam control.

• For temperatures of more than 450˚C • Low noise multistage trim design.

• Best prevention against thermal shocks because of special “Schroedahl atomizing system” (steam assisted water evaporation).

• No downstream protection pipe needed • Shortest straight run after valve for the downstream temperature measurement • Best handling for various load cases • Best control in the near of saturation condition.

STEAM CONDITIONING VALVE

Leslie Ring Style • 6”-48” (DN 150 – 1200) • Highly Characterized Control • High Rangability Through Design • Up to 1200˚F / 600psi Pressure Drop • Large Spray Volume Capable with No Pressure Drop

15

CONTROL VALVES AUTOMATIC RECIRCULATION VALVES

PROCESS

Product Features • Pump protection valve w/ automatically modulating bypass function (3-way valve) • Forged/cast material, carbon steel, stainless steel, special materials (e.g. Super Duplex) • Internal operation (no external energy source required) • Easy to install – vertical or horizontal position, directly on pump outlet • Low maintenance, dependable operation • Suitable for all liquids (water, oils, hydrocarbonates, liquid gas and other chemical media)

Applications Option A

Option B

• Boiler feed water • Condensate • Chemical processes • Fossil fuel power plants • Extinguishing water • Snow canons

TDM

Schroedahl TDL • Max 40 bar / 580 psi LP Service • Temperatures up to 230°C / 446°F • Up to 1 Controlled Pressure Drop Stage • Forged or Cast Body • Startup bypass option (4-way valve option)

Schroedahl TDM • PN 63-400 / Class 150-2500 • Max 230 bar / 3335 psi HP Service • Temperatures up to 230°C / 446°F • Up to 5 Controlled Pressure Drop Stages • Forged Body • Startup bypass option (4-way valve option)

16

Schroedahl MRK

Schroedahl SUL

• Supercritical HP Feed & HP Injection Service • PN 250-640 / Class 1500-4500 • Max 500 bar / 7250 psi Critical Service • Temperatures up to 230°C / 446°F • Up to 10 Controlled Pressure Drop Stages • Suitable for continuous low load application • Forged Body • Startup bypass (4-way valve option)

• Pressure Max 20 bar / 290 psi LP Service • Temperatures range -200°C to +230°C • Single-stage pressure reduction • Cast Body

Sales@FPG.co

LOW FLOW

• Low Flow Control Valves (807) • Exotic Alloys (807) • Bellows (808) • Standard Flange (860 and 1499) • Manual Ball Valve (SMV • Standard Cooling Fin (859) • Extended Cooling Fin (973) • 14" Extended Bonnet (884) RCV 807 • Cold Box Extension (CBX) • 60,000 PSI Ultra-High Pressure (HP-60) • 40,000 PSI Ultra-High Pressure (HP-40) • 15,000 PSI High Pressure (HP-15) • 10,000 PSI High Pressure Globe Control Valve (HP-10 Globe) • Severe Service Globe Control Valve (1711/1711HD) • Kynar PVDF Plastic Control Valve for Corrosive Service • 3A Sanitary Control Valve (SCV-85/95) • Right Angle 3A Sanitary Control Valve (SCV-89) Valves

3A Sanitary

Kynar PVDF

RCV 1711

RCV 860

RCV 884

RCV Model 9000 ANSI Class 150/300 Globe Style Valve with bolted bonnet and post guided innervalve with NPT, Wafer or Flanged connections.

RCV Model 9100 Proccess Control Valve The Model 9100 process control valve is a 2-way, high capacity globe with a B62 bronze body/bonnet.

RCV 808

RCV CBX

RCV 860

SMV BALL

RCV HP-60

RCV HP-15

RCV HP-40

RCV HP-10

RCV ANSI Class 150/300 Globe Style 3-Way Mixing/Diverting with bolted bonnet and post guided innervalve (Model 9000) with NPT, Wafer or Flanged connections RCV Low Flow 3-Way Mix/Diverting (564 and 1118) Control Valves

17

CONTROL VALVES ON/OFF & SOLENOID

• • • • • • •

R.G. Laurence

1700 & 1800 Heat-Actuated & 2800 FIRE-CIDE Series Shutoff Valve 2500 Electrically-Actuated Shutoff Valve Series 700 Direct Operated On/Off Valves Series 700HP Semi-Direct Operated On/Off Valve for Liquid Service Series CY 500 Direct Operated Normally Closed/Opened by Cylinder On/Off Valves Series CY 600 Semi-Direct Operated Normally Closed/Opened by Cylinder On/Off Valves Series 800 Semi-Direct Operated On/Off Valves for Air, Steam, Fuel Gases and other Light Liquids Under High Pressures

PRESSURE DROP AND NOISE ATTENUATION Pressure Drop Plates Solenoid Valves

Shut Off Valves

GENERAL SERVICE, ELECTRONICALLY ENHANCED, MINIATURE, PROCESS, DUST COLLECTOR VALVES & MORE ASCO solenoid valves control critical flow of air, gas, water, oil, and steam in applications spanning numerous industries.

These 2-way, 3-way and 4-way solenoid valves can handle most fluid control applications and are now available with Class I, Division 2 approvals.

DAMPERS & BUTTERFLY VALVES Advanced Valve Design • High Temperature Dampers • Butterfly Valves • Severe Duty & Specialty Dampers & Butterlfy Valves up to 22000F • Wide Range of Metallurgies & Trims

18

Sales@FPG.co

ACTUATORS AND POSITIONERS ELECTRONIC VALVE ACTUATOR SEVA (Smart Electronic Valve Actuator) The SEVA is our next generation Smart Electric Valve Actuator that provides our customers with an electric actuator with best-in-class features. This product was designed for extreme conditions with military grade components while providing the accuracy and repeatability the market demands.

Two models are available: • SEVA 100 for 1/4…1 in.

• SEVA 200 for 1/4…2 in.

• Microprocessor-controlled, linear stepper motor • Manual override • Maximum thrusts of 100 and 200 lbF • Overvoltage protection • Setup via firmware and terminal interface via USB port • Optional limit switches for customer-adjustable limit points • Universal AC input

• 24V DC input • Analog input/output • USB CDC device (mini - B) • Internally powered (active) feedback • SoloCue Software • Optional communication protocols: ◊ EtherNet/IP ◊ Modbus® TCP/IP ◊ Modbus® RTU

SRD/SRI Smart & Analog Valve Positioners SRD smart valve positioners deliver actionable diagnostic information about valve performance and assist compliance with fugitive emissions regulations. SRI analog valve positioners are also available. The SRD 960 (explosion-proof) and SRD 991 (intrinsically safe) digital valve positioners are economical solutions for diverse applications. An optional base model, the SRI 990, provides analog valve control. Users can easily upgrade from SRI to SRD.

PNEUMATIC ACTUATOR MODELS

Electropneumatic Positioners SR 6136, SR 1000L and SR 33 * Max Air Supply 6 bar / 87 psig

ST 6135.B6 (43 in2)

force max. 495 lbs. max. stroke 1 3/8” stem 1/2”

ST 6160.A6 (82 in2)

force max. 900 lbs. stroke max. 1 1/2” stem 1/2”

ST 6160.C6 (82 in2)

force max. 720 lbs stroke max. 2 3/8” stem 1/2”

ST 6175.B6 (155 in2)

force max. 3600 lbs stroke max. 2 3/8” stem 1 1/4”

ST 6175.C6 (155 in2)

force max. 4270 lbs stroke max. 4” stem 1 1/4”

Frew engineers will optimize your product selection for process conditions, lead time and cost.

19

CONTROL VALVES ELECTRIC ACTUATOR MODELS

Version E

Version DC

Acuating Force

24 Vdc

1.5 kN

24 Vdc / PoP*

3/6/10 kN

n/a

15/22/30 kN

React 15 React 30/60/100 React 150/220/300

REpos Advanced Digital Positioner w/ Display • 128*64 dots graphic display • Menu guided configuration • Input (0)4-20 mA / (0)2-10 V • Control output: solid state relay • Automatic adaptation

• Manual adaption • Service / diagnostic function • Feedback 4-20 mA (option) • Fieldbus: Profitbus; CAN-open (option)

REdrive Control and Shutoff Valves with Brushless 24 Vdc Motor Technology • 3-point step control • Separate force and limit switches for both directions • Four speed settings as standard • Low height due to adaption spindle • Protection rating IP 65, NEMA Type 4X • Valve position indicator • Limit (2) and force (2) switches (and two additional)

• Manual hand wheel • Electrical connections via plug/socket connectors • CE marking • Heater (option) • Potentiometer (option) • 2/3-wire position indicator (option)

REacTron – single-loop PID controller integral to electric actuator PoP (Power Off Positioning) – super-capacitor positioner upon loss of power or signal failure

DIRECT-OPERATED REGULATORS

Leslie L Series Internal Pilot, Piston-Operated Reducing Valves and LX Series Differential Pressure Regulators • 1/2 - 3" Valve Sizes • End Conn.: THD, SWE, BWE, RF • ANSI CL 125 - 600 • Body Mat'l: Cast Iron (LKY), WCB (LS-5), Bronze (LY) UL Series Back Pressure • For steam and gases; fast acting, self contained piston operated valve for high accuracy • Three spring pressure ranges from 25 to 300 psig

20

Sales@FPG.co

PILOT-OPERATED REGULATORS

Leslie Controls

Class GP Series Air-Loaded Pressure Reducing Regulators Model GPKP-1 Steam-Piloted, Self-Contained Pressure Reducing Valves

GP GPKP

GTK, GTRK, GTB and GTS Eventemp Regulators for Large Volume Heating or Cooling Applications • 1/2 - 4" Valve Sizes • End Conn.: THD, RF • ANSI CL 125 - 300 • Body Mat'l: Cast Iron (GT(R)K), WCB (GTS), Bronze (GTB) LTC Duo-Matic Regulators for Temperature and Pressure Regulation • 1/2 - 3" Valve Sizes • End Conn.: THD, RF • ANSI CL 125 - 600 • Body Mat'l: Cast Iron (LTCPK), WCB (LTCPS), Bronze (LTCP)

LTCP GTK

M Series Regulators For Small Flow Applications • 1/2 - 1" Valve Sizes • End Conn.: THD • ANSI CL 200 • Body Mat'l: Cast Iron (MK), Bronze (M)

WATER HEATERS Leslie Controls Constantemp Feedforward Water Heating System; LES Series Packaged, Steam-fired Water Heater

Leslie Controls LES Series Packaged, Steam-fired Water Heater

21

CONTROL VALVES

Air Pressure Regulators ControlAir offers three main categories of Air Pressure Regulators; Precision Regulators, Filter Regulators/General Purpose Regulators.

Precision Regulators offer accuracy and sensitivity while General Purpose Regulators offer greater economy and efficiency. Air Filter Regulators are considered a vital air preparation device when it comes to protecting your sensitive downstream equipment. Each category includes regulators in various sizes, materials and pressure ranges.

Type 100 – Precision Air Pressure Regulator Type 300 – Air Filter Regulator Type 350 – Stainless Steel Air Filter Regulator Type 400 – General Service Pressure Regulator Type 700 – High Flow Pressure Regulator

Back Pressure Regulators

Visit FPG.co for many more products and their options and pricing.

Back Pressure Regulators, also known as pressure reducing regulators or pneumatic relief valves, are a key factor in protecting downstream equipment in a pneumatic system from over pressurization. ControlAir Precision Back Pressure Regulators are high flow, stable and highly accurate with adjustable set points. A rolling diaphragm provides the sensitivity that enables these units to vent to atmosphere in response to the slightest upstream changes.

Type T700BP - Precision Back Pressure Regulator

Some common applications include: • Pressure control for fuel cell testing • Pressure control for fuel cell testing • Pressure control in the extrusion process • Precision bypass valves for critical processes

Pressure Transducers ControlAir offers I/P, E/P and P/I Transducers. These versatile Electronic Pressure Regulators are designed to offer the highest degree of accuracy, reliability and repeatability in a compact housing. Offered with extensive combinations of inputs and outputs, industry certifications (FM, CSA, ATEX, IECEx) and Explosion-proof housings. For natural gas applications, please use our Type 950 with an NG rating.

Type 500 – Electro-Pneumatic I/P Transducer (I/P, E/P) Type 950XP – Explosion-Proof I/P Transducer

Pneumatic Air Filters ControlAir Pneumatic Filters help protect equipment and processes by efficiently removing oil, water, and particulate solids from compressed air and gas lines. Filters are available with high capacity depth filters of 5, 25 and 40 micron. Coalescing Filters provide superior filtration down to 0.03 or 0.01 micron. Housings are available in aluminum or stainless steel.

Type 345 Pneumatic Air Filter

22

Sales@FPG.co

Pneumatic Volume Boosters ControlAir Pneumatic Volume Boosters offer high flow capacity and fast response with a wide range of signal to output pressure ratios to choose from. Our Pneumatic Volume Boosters are used extensively for increased flow capacity, pressure amplification, and remote pressure control applications.

Type 600 – Volume Booster Type 650 – Positive Bias Air Relay Type 6600 – Stainless Steel High Capacity Volume Booster

Diaphragm Air Cylinders ControlAir Diaphragm Air Cylinders offer low-friction dynamic sealing by way of long stroke rolling diaphragm technology.

These pneumatic cylinders provide virtually frictionless conversion of pneumatic pressure to linear force. Operating features offer:

Air Relays

• Super Sensitivity • No Lubrication Required • Low Hysteresis • No Blow-By Leakage • Wide Temperature Variations

Air Relays are designed to provide highly accurate and reliable output pressure control to a large variety of applications across multiple markets. Versions offered include pilot operated, multi-stage 1:1, positive and negative bias adjustments, internal and external bias adjustments, reverse acting, high flow and high relief capacity.

Type 200 – Precision Air Relay

Liquid Level Measurement The L100 Bubble-Tube Liquid Level System is a fully self-contained instrument, requiring only connections to air or gas supply, dip tube and electrical power source to provide precise level measurement. Because only the stationary dip tube and the purge gas come in contact with the liquid, this system is ideal for applications involving hazardous locations or liquids which are highly corrosive, viscous, hot, (molten metal), explosive, slurry type or foodstuff.

L100 - Bubble Tube Liquid Level System

Valve Positioners ControlAir Pneumatic and Electro-Pneumatic Valve Positioners are designed to provide stable and accurate control of rotary and linear valves. These force balanced positioners are fast responding, reliable and easy to calibrate and maintain. We also have a natural gas rated Valve Positioner when paired with our Type 950 IP Transducer.

Type 2000 – Pneumatic and Electro-Pneumatic Valve Positioner

Gauges & Accessories ControlAir’s line of air pressure gauges come in various sizes, ranges and materials. These include 1/4 and 1/8” NPT and BSP mounting threads. We also have a line of stainless steel gauges for corrosive and harsh environments.

1/4” NPT, 0-60 PSI (0-4bar), Stainless Steel Pressure Gauge

23

HEAT EXCHANGERS Kelvion Plate Heat Exchangers

• Turbulent Flow Even with Low Flow Velocities • Higher k-Values Due to Corrugation • Self-Cleaning Effect—Less Fouling, Less Cleaning • Higher Shear Stress Compared to Shell & Tube (3-10x) • Small footprint • Tight approach temperature / low LMTD • Low Hold-up volume, quicker response

GASKETED PLATE & FRAME • Moderate pressure and temperature ranges • Easy and convenient maintenance, replacement and service • Several innovations compared to other P&F manufacturers o Optiwave design … highest efficiency, lowest fouling o Ecoloc gaskets system … easy fixation and removal o Posloc assembly … perfect plate pack alignment o Single frame … low cost, flexible (all plates packs) • Many plate designs, extensive gasketing choices to suit a wide range of applications

NT – New Technology plates series, most flexible and universal plate series, largest choice of gasket materials (good temperature/chemical resistance), food approval, many sizes, good performance at good price and short lead time NP – New high Performance series, up to 42 barg, high NTU values (cold supply in data centers/high rise buildings) NH – New High pressure series, adapted herringbone design, combines high pressure resistance with available specific plate materials (oil & gas, chemical industries) LWC – Laser Welded Cassette series, combines advantages of welded and gasketed plate HXes, one media having gasketed flow channels (cleaning/inspection access) NL – New Large gap series, deeper corrugation gap >4mm for high viscosity fluids as well as shear-sensitive media (e.g. dairy, food & beverage industries), pressure resistance up to 25 barg NW – New Wide gap series, herringbone gap up to 10mm, media with solids, high turbulence, minimal pressure loss NF – New Free Flow (washboard) design for fibers and solids, 5-10mm gap, excellent alternative to shell & tube and spiral heat exchangers ND – New Double-Wall includes indication port for high production security

24

www.FPG.com

Brazed Plate • Compact design, light weight • Medium pressure • Standard applications – HVAC and refrigeration systems

Welded Plate • High pressure and temperature ranges.

• Used in Oil and Gas, Petrochemical and Chemical applications, Power, Automobile, Steel, Pharmaceutical industries, Renewables, Food, Paper manufacturing, and many others…

K°BLOC • Up to 750°F (400°C) and 725 psig (50 barg) • Easily inspectable design for high safety requirements and quick maintenance (hydroblasting or minimal chemical cleaning) • Non elastomeric gaskets offer a wide resistance range • Application versatility • Unique Double Dimple plate pattern for high fouling applications or low pressure drop requirements (condensing/high viscosity) • Excellent replacement for demanding applications with much better CAPEX / TIC metrics

Rekuluvo/Rekugavo • Heat transfer between gases, high temperatures (recuperative air/gas preheater) • Compact, lightweight, high efficiency, leak free.

• Best when large heat exchange areas, low temperature approach.

• Custom engineered, no standardized sizes or gaskets/crimped edges • Diverse design – hood and casing • Counter-flow, Co-current, Cross-flow • Combustion Air/Flue Gas Preheating • Temperature -40°F (-40°C) to 1440°F (780°C)

K°FLEX • Plate pack & shell design • Pressure +/-7.25 psig (+/-500 mbar) • Cryogenic temperatures -265°F (165°C) to 1022°F (550°C) • Pressures from full vacuum to 1450 psig (100 barg) • Custom engineered, compact, low weight, fully welded, leak-free • Asymmetric plate – great for phase change applications • Wide Applications – clear benefit when operating under vacuum, high pressure drops, high temperatures, examples: o Overpressure Steam Condenser o Plate Falling Film Evaporator (PFFE) o Hydrocarbon Vacuum Condenser o Stripper/Thermosyphon Reboiler o Integrated Overhead Condenser Condenser) o Reflux Condenser o Biomass/Waste Incineration Vacuum Condenser o Flue Gas Condense o Geothermal Evaporator o Multi-fluids, different pressures

Ask about OEM consignment and volume pricing options.

25

HEAT EXCHANGERS Kelvion Thermal Engineered Solutions

Air Fin Cooler • Draft: Induced or Recirculation • Flow: Co-Current, Cross-Current, Counter-Current • Finned tubes: L, Overlap L, Extruded, Embedded, Groovy • Design Innovations: o Groovy Fins o DIESTA o CTI Seals, Sleeves & Full-Length Tube Liners

Air Dryer & Preheater/Economizer • Many Variations, Customized for the Application • EcoMi Modular General Structure

• Connections • Casing Design • # of Dry HX Sections • # Condensing Sections • Tube Type • Cross Section Size • Inspection/Cleaning Hatch Sections, • Automated/Manual Bypass & Controls

GAS: GAS/LIQUID HX RECUPERATORS & ECONOMIZERS

26

www.FPG.com

COOLING TOWERS

Polacel

Enexio

• Open-Circuit Cooling Tower Design • Modular, Factory Assembled & Field Erected options • Cell Sizes: 3’x3’ to 60’x60’ cell sizes • Maximum Flow: 20,000 max gpm

• Custom Open-Circuit Cooling Tower Designs • Field Erected options

Tundracel • ClosedCounter Current Circuit Evaporative Process Cooler …compare to Wet Surface Air Cooler™ (Alfa Laval) …Hybrid Version allows both Wet & Dry Cooling • Modular, factory Assembled & Field Erected options • Effective alternative to Air Fin Cooler, or Cooling Tower & Plate HX • Process Water HX “Bundle” Section: 8’x16’ to 8’x32’ • Standard Size Casing/Fan Section: 16’x16’x8’ to 32’x32’x12’

Desublimator • Gas to Solid / Solid to Gas – thermodynamic means of product separation • Many potential substances – Naphthalene, Iodine, Water, Sulfur, Citric Acid, Menthol, Xylene, etc.

• Alternative to Adsorption/Absorption Technologies • High Efficiency Solution for: Raw Material Waste Environmental Pollution Clogged Pumps

Printed Circuit Heat Exchanger (K°Bond) • Highly compact design gives maximum heat transfer rate & hence thermal efficiency • Allows a temperature approach up to 2°C • High Pressure: to 10,000 psi • Working Temperatures from +600°C to Cryogenic -200°C • High Reliability: Diffusion bonding ensures the highest safety level, no leak risk

Air Cooled Condenser • Design o A-frame (traditional) – force-draft fan, large, over 100 MW o ACX (new) – induced-draft fan, small-to-medium ACC, 10-100MW • Tube Bundles o MASH – deflegmation (D) and condensation (K) channels on each bundle. (API 661) o SR (single-row) – D and K channels are separate bundles, physical separated on ACC • Vacuum and Pressurized types • Power and Oil & Gas Industries, Waste-to-Energy and Renewables

DOUBLE WALL SHELL & TUBE (PROCESS SAFETY/INTEGRITY) • Permanently prevents media from mixing • Double tubes & tube sheets, leakage switches, very flexible designs • Allows different inside and outside tube materials for media compatibility • Transformer Cooling, Chemicals, Gas, Pharma, & Food Industries

Ask about OEM consignment and volume pricing options.

27

HEAT EXCHANGERS

Shell & U-tube PS and PW-Type U-tube heat exchangers are designed for a wide range of liquid to liquid (PW) and steam to liquid (PS) applications.

Shell & Straight Tube

Shell & Coil

LENS heat exchangers break the mold with a new multi-dimensional, ingenuity opening doors to possibilities in fluid dynamics and process control.

JAD shell & coil heat exchangers are distinctly characterized by their angular connections, and by the circular layers of helically corrugated tubes within the shell.

P-Line Sanitary Heat Exchangers Pharmaceutical & Food Grade Heat Exchangers A series of exchangers for pharmaceutical and food industries and suitable for all other applications that are in compliance with FDA and 3A.

E-Line Economizers Air to Water Heat Exchangers AICs standard line of E-Line economizers is the optimal solution for boiler flue gas heat recovery.

B-Line Heat Exchangers B6-Line Heat Exchangers M-Line Marine Alloy Heat Exchangers TW-Line Heat Exchangers

REX Tank Heat Exchangers The new generation REX instantaneous indirect water heaters are engineered for high heating efficiency.

Steam/Hot Water Unit Heaters

Unit Heaters

MV

High Level Circulators

Door Heaters

High Mounted Series Heaters

Air Curtains

IFB

Direct Das Fired Heaters

VIFB

Integral Face & Bypass Coils Door Protection Industrial Gas Heaters Combustion Air Preheaters

Gas Fired Unit Heaters

Fresh Air Supply Units

High Static Fresh Air Supply Units

SteadyAir

Air Handlers

28

www.FPG.com

WEB-BASED SELECTION, RFQS, AND BUYING

• • • • • • • •

FPG.CO

Explore product offerings’ full set of options Investigate configured costs Buy Online Request for Quote (RFQ) Chat Support Technical Briefs Installation, Operation & Maintenance (IOM) manuals.

Log in to review or manage orders and quotes

Sales@FPG.co | 855.FREW.PRO (855.373.9776)

Manufacturer’s Representative and Distributor

R.G. Laurence

Serving locations across Indiana, Illinois, Kentucky & Ohio

Toll Free... 855.FREW.PRO 855.373.9776 Noblesville Headquarters

ILLINOIS

OHIO

Fax.......... 855.373.9329 Email Sales@FPG.co

INDIANA

KENTUCKY

Headquarters 605 Sheridan Rd, Building 8104 Noblesville, IN 46060

www.FPG.co FPG06.21