Solutions by Numotion

The ShowerGlyde range is designed for individuals experiencing difficulty getting into and out of a tub or shower. Three models are available depending on the layout of your bathroom. Multiple seat options, a Seat Belt, and a Grab Bar are included with every model.

ShowerGlyde Model SG1 is a revolutionary sliding transfer bench. It is designed to fit in environments where there are no obstructions adjacent to the tub (i.e. vanity, toilet). SG1 slides easily over the tub and locks in two points; on the inside and outside of the tub. This allows for safe transfers while using the bench. SG1 can be assembled as a left or right-hand unit. One grab bar installed at the wall side of the rails is included as an aid for sliding. The user can pull or push themselves easily along the rails. SG1 is height adjustable permitting clearance of up to a 19.5" tub height. Optional extension legs are available for taller tubs (up to 25" high). Model SG1 also includes a Seat Belt, a Grab Bar, and a Commode Seat with 3 options; an open Commode Seat for easy washing, a Reducer Ring to reduce the size of the commode opening, and a Solid Seat Insert to close the commode opening completely Weight capacity is 330lb.

Includes:

• Grab Bar

• Seat Belt

• 19.5" Tub Clearance

• Commode Seat

• Reducer Ring Insert

• Solid Seat Insert

ShowerGlyde Model SG2 is a sliding transfer bench designed to fit in environments with a toilet adjacent to the tub. Similar to SG1, the SG2 slides effortlessly over the tub and locks in two points; on the inside of the tub and over the toilet. A longer set of rails accommodates the use of the commode over the abutting toilet. SG2 can be assembled as a left or right-hand unit. One grab bar installed at the wall side of the rails is included for support in sliding. SG2 is height adjustable allowing clearance of up to a 19.5" tub height. Optional extension legs are available for taller tubs (up to 25" high). Model SG2 also includes a Seat Belt, Grab Bar, and a Commode Seat with 3 options; an open Commode Seat for over-toilet use, a Reducer Ring Insert to reduce the size of the commode opening, and a Solid Seat Insert to close the commode opening completely. Weight capacity is 330lb.

Includes:

• Grab Bar

• Seat Belt

• 19.5" Tub Clearance

• Commode Seat

• Reducer Ring Insert

• Solid Seat Insert

ShowerGlyde Model SG3 is a sliding transfer bench designed to fit in tighter environments or bathrooms with a vanity adjacent to the tub. Shorter rails and a swivel option aIlow the bench to clear the obstruction/tight space without sacrificing comfort or ease of use. SG3 slides easily in and out of the tub and locks in two points; on the inside and outside of the tub. SG3 can be assembled as a left or right-hand unit. One grab bar installed at the wall side of the rails is included for support in sliding. SG3 is height adjustable allowing clearance of up to a 19.5" tub height. Optional extension legs are available for taller tubs (up to 25" high). Model SG3 also includes a Seat Belt, Grab Bar, and a Commode Seat with 3 options; an open Commode Seat for easy washing, a Splatter Guard, and a Solid Seat Insert to close the commode opening completely. Weight capacity is 330lb.

Includes:

• Grab Bar

• Seat Belt

• 19.5" Tub Clearance

• Commode Seat

• Splatter Guard Insert

• Solid Seat Insert

SHOWERBUDDY SB1

The ShowerBuddy SB1 transfer system will turn your existing bathroom into an accessible bathroom in minutes. It allows you to enjoy showering again without the excessive cost, delay, and stress of a full bathroom remodel. The SB1 alleviates heavy lifting and multiple transfers for toileting and showering. This chair is separated into three sections; rolling base (shower chair), bridge, and shower base. The rolling base rolls around the house like a wheelchair allowing patients to easily transfer and then roll right over a toilet (most toilets). Once completed with toileting the rolling base can connect to the bridge and onto the shower base allowing the chair to slide into the shower stall. Once inside the shower stall, the bridge disconnects, and the shower base can rotate 360 degrees to allow the user to face the shower controls or any other direction. ShowerBuddy (SB1) is a caregiver-assisted product; it is

Rotates 360 degrees inside shower (subject to space)

Arms - removable / lockable / flip-back

Caster Wheels are 5" and locking

Tool-free assembly

SB1 DIMENSIONS

The TubBuddy (SB2) transfer system will turn your existing bathtub into an accessible bathroom in minutes. It allows you to enjoy showering again without the excessive cost, delay, and stress of a full bathroom remodel. The TubBuddy SB2 alleviates heavy lifting and multiple transfers. This chair is separated into three sections; rolling base (shower chair), bridge, and tub base. The rolling base rolls around the house like a wheelchair allowing patients to transfer and then roll right over most toilets easily. Once toileting is complete the rolling base connects to a bridge and onto the tub base allowing the chair to slide over the tub. When the patient is over the tub, the bridge disconnects, and the curtain can close to offer more privacy. TubBuddy (SB2) is a caregiver-assisted product; it is not intended for independent use.

Weight Capacity: 300 lbs.

TUBBUDDY SB2 SB2

SB2 DIMENSIONS

TUBBUDDY WITH TILT SB2T

The TubBuddy with Tilt (SB2T) transfer system will turn your existing bathtub or curbed shower into an accessible bathroom in minutes. It allows you to enjoy showering again without the high cost, delay, and stress of a complete bathroom remodel. The TubBuddy SB2T alleviates heavy lifting and multiple transfers. This chair is separated into three sections; rolling base (shower chair), bridge, and tub base. The SB2T chair rolls around the house like a wheelchair allowing patients to transfer onto it easily. Once in the bathroom, the SB2T can roll over most toilets. When toileting is complete, the rolling base connects to the tub base allowing the chair to slide in a tilted position with legs raised and ready to move over the tub. Once over the tub/shower, the rolling base and bridge can be disconnected and rolled away so that the shower curtain can be closed or allow a caregiver the option to get closer to the patient. A custom bridge may be required if a toilet is too close or too far from the tub. The TubBuddy with Tilt (SB2T) is a caregiver-assisted product; it is not intended for independent use. Additional accessories available.

Weight Capacity: 300 lbs.

SB2T

SB2T DIMENSIONS

Extended standard footrests 37" Footrests rotated inward 37" Tilted standard footrests

Seat tilts 0-30 degrees

*Footrests rotated inwards

15.57"-19.75"

Toilet clearance For bath tubs higher than 19.75" use accessory RBE24 height extender

Length can be customised. see accessories.

To increase height up to 24.75" use accessory TBE24 height extender

long at base

ROLL-IN SHOWERBUDDY WITH TILT SB3T

The Showerbuddy SB3T rolling shower chair is designed for a curb-less/ accessible or roll-in shower stall. The SB3T rolls over most toilets for use as a commode and offers a tilt position that releases pressure for the user and improves comfort. The chair includes a standard front opening cushion, headrest, swing away and removable footrests, flip back and removable armrests, 4” lockable casters, removable commode, seat belt, and height adjustability. ShowerBuddy (SB3T) is a caregiver-assisted product; it is not

SB3T

ADJUSTABLE HEADREST

FLIP-BACK ARMREST

SB3T DIMENSIONS

ROLL-IN SHOWERBUDDY LITE SB6C

The Showerbuddy SB6c shower chair is designed for a curb-less/ accessible or roll-in shower stall. This shower chair features the same functions as an SB3T but at a fraction of the cost. The SB6C is more compact and lightweight than the SB3T. It measures at 22.5” at its widest point (armrest) allowing it to fit through doorways as narrow as 24”. The SB6C rolls over most toilets for use as a commode. This chair comes standard with a front opening cushion, swing away and removable footrests, clip-on calf strap, flip back armrests (not lockable), commode bucket with lid, pee guard, chest belt, and is height adjustable. ShowerBuddy (SB6C) is a caregiver-assisted product; it is not intended for independent use.

ADJUSTABLE HEIGHT

SB6C DIMENSIONS

22" Seat Width

ROLL-IN SHOWERBUDDY BARIATRIC XL and XXL

The ShowerBuddy Bariatric Shower Chair (SB6C-22) (SB6C-26) are designed for curb-less/accessible or roll-in showers. These chairs are intended for bariatric use and can accommodate patients up to 440 lbs. The seat width ranges between 22” and 26". Both chairs can roll over most toilets to be used as a commode. The chairs come standard with a front opening cushion, swing away and removable footrests, a clip-on calf strap, lockable flip-back armrests, a commode bucket with lid, pee guard, chest belt, and is height adjustable. These ShowerBuddy Bariatric Shower Chairs are caregiver-assisted products; they are not intended for independent use.

Weight Capacity: 440 lbs.

SB6C-22 DIMENSIONS

SB6C-22

SB6C-26

SB6C-26 DIMENSIONS

26" Seat Width

ROLL-IN SHOWERBUDDY SOLO SB6W

The Roll-In Buddy Solo (SB6W) shower chair is designed for a curb-less/accessible or roll-in shower stall. The SB6W can roll over most toilets to be used as a commode. It is a self-propelled shower chair and is designed for independent use. The SB6W includes two 24” drive wheels to allow the user safe and easy maneuvering throughout their home and restroom areas. The chair comes standard with a front opening cushion, swing away and removable footrests, a clip-on calf strap, flip back armrests (not lockable), a commode bucket with lid, pee guard, chest belt, and is

SB6W

SB6W DIMENSIONS

ROLL-IN ECO TRAVELER SB7E

The ShowerBuddy Eco Traveler (SB7E) is designed for a curb-less/ accessible or roll-in shower stall. The SB7E can roll over most toilets to be used as a commode. It is lightweight yet sturdy, built with a strong aluminum frame, and intended for use during travel. It can fold away neatly into a travel bag (sold separately) or into a closet for storage purposes. Despite its small size, the SB7e still enjoys the premium 4" locking casters, commode bucket with a lid, as well as swing-away height adjustable footrests. The ShowerBuddy Eco Traveler (SB7E) is a caregiver-assisted product; it is not intended for

SB7E

FOLDS UP

POWER BATH-LIFT FOR THE BATHTUB

The BathLyft is a battery-operated bath chair that lowers and lifts the user in and out of the bathtub, reducing the strain on the user and preventing the risk of falls. The stable frame and base-plate ensure the user’s stability and safety, while the padding and optimized dimensions ensure a comfortable bathing experience. The Bathlyft’s superior design allows for a backrest recline of up to 52° and lowers into the tub with a minimum sitting position of 2.75" from the bottom. The side flaps move into and out of place to create a transfer surface allowing the user even more peace of mind. The water-tight hand control floats in the tub for easy access while bathing and will provide the user with approximately 35 lifts on a single charge. The built-in safety switch will prevent use if the battery is too low to perform a full lift. The twopiece construction makes this lift easy to assemble, disassemble, store, and transport. Set-up is tool-free and ensures easy installation and operation.

Weight Capacity: 300 lbs.

Available in Blue, Orange, Pink, White

SB’s line of designer shower stools allows for a sleek, sophisticated and modern solution to an age-old problem: safety, comfort, and dignity while showering. Refine is available in two different variations as well as three colors to suit your designer washroom needs. Refine chairs are 16" high and have a 300lb weight capacity. With superb structural quality, you can rest assured that Refine stools will provide the extra support and stability needed for daily showering. Refine shower chairs require no assembly and have adjustable feet to prevent wobbling. Refine chairs are easy to clean and maintain and will not rust or corrode.

M1

pure grey

all Models available in white, pure grey, and concrete

M2 concrete