Bathing Solutions by Lolly and Pops Health and Wellness

The ShowerGlyde range is designed for individuals experiencing difficulty getting into and out of a tub or shower. Three models are available depending on the layout of your bathroom.

Multiple seat options, a Seat Belt, and a Grab Bar are included with every model.

1

ShowerGlyde Model SG1 is a revolutionary sliding transfer bench. It is designed to fit in environments where there are no obstructions adjacent to the tub (i.e. vanity, toilet). SG1 slides easily over the tub and locks in two points; on the inside and outside of the tub. This allows for safe transfers while using the bench. SG1 can be assembled as a left or right-hand unit. One grab bar installed at the wall side of the rails is included as an aid for sliding. The user can pull or push themselves easily along the rails. SG1 is height adjustable permitting clearance of up to a 19.5" tub height. Optional extension legs are available for taller tubs (up to 25" high). Model SG1 also includes a Seat Belt, a Grab Bar, and a Commode Seat with 3 options; an open Commode Seat for easy washing, a Reducer Ring to reduce the size of the commode opening, and a Solid Seat Insert to close the commode opening completely Weight capacity is 330lb.

Includes: • Grab Bar • Seat Belt • 19.5" Tub Clearance • Commode Seat • Reducer Ring Insert • Solid Seat Insert

2

ShowerGlyde Model SG2 is a sliding transfer bench designed to fit in environments with a toilet adjacent to the tub. Similar to SG1, the SG2 slides effortlessly over the tub and locks in two points; on the inside of the tub and over the toilet. A longer set of rails accommodates the use of the commode over the abutting toilet. SG2 can be assembled as a left or right-hand unit. One grab bar installed at the wall side of the rails is included for support in sliding. SG2 is height adjustable allowing clearance of up to a 19.5" tub height. Optional extension legs are available for taller tubs (up to 25" high). Model SG2 also includes a Seat Belt, Grab Bar, and a Commode Seat with 3 options; an open Commode Seat for over-toilet use, a Reducer Ring Insert to reduce the size of the commode opening, and a Solid Seat Insert to close the commode opening completely. Weight capacity is 330lb.

Includes: • Grab Bar • Seat Belt • 19.5" Tub Clearance • Commode Seat • Reducer Ring Insert • Solid Seat Insert • Slides Over Toilet

3

ShowerGlyde Model SG3 is a sliding transfer bench designed to fit in tighter environments or bathrooms with a vanity adjacent to the tub. Shorter rails and a swivel option aIlow the bench to clear the obstruction/tight space without sacrificing comfort or ease of use. SG3 slides easily in and out of the tub and locks in two points; on the inside and outside of the tub. SG3 can be assembled as a left or right-hand unit. One grab bar installed at the wall side of the rails is included for support in sliding. SG3 is height adjustable allowing clearance of up to a 19.5" tub height.

Optional extension legs are available for taller tubs (up to 25" high). Model SG3 also includes a Seat Belt, Grab Bar, and a Commode Seat with 3 options; an open Commode Seat for easy washing, a Splatter Guard, and a Solid Seat Insert to close the commode opening completely. Weight capacity is 330lb.

Includes: • Grab Bar • Seat Belt • 19.5" Tub Clearance • Commode Seat • Splatter Guard Insert • Solid Seat Insert • Swivel Seat

4

SHOWERBUDDY SB1 The ShowerBuddy SB1 transfer system will turn your existing bathroom into an accessible bathroom in minutes. It allows you to enjoy showering again without the excessive cost, delay, and stress of a full bathroom remodel. The SB1 alleviates heavy lifting and multiple transfers for toileting and showering.

This chair is separated into three sections; rolling base (shower chair), bridge, and shower base. The rolling base rolls around the house like a wheelchair allowing patients to easily transfer and then roll right over a toilet (most toilets). Once completed with toileting the rolling base can connect to the bridge and onto the shower base allowing the chair to slide into the shower stall. Once inside the shower stall, the bridge disconnects, and the shower base can rotate 360 degrees to allow the user to face the shower controls or any other direction. ShowerBuddy (SB1) is a caregiver-assisted product; it is not intended for independent use.

Weight Capacity: 300 lbs.

SB1

5

Rotates 360 degrees inside shower (subject to space) Arms - removable / lockable / flip-back Caster Wheels are 5" and locking Tool-free assembly

SB1 DIMENSIONS 22.5"

460

18"

475

19"

31.5"

6.25"

467 front 520 rear

18.25"

inside front

20.5"

outside rear

9.5"

17"

Toilet clearance width between frame is 11.5"

12"-14.75"

18"-20"

10"-12"

16"

inside rear

toilet clearance

460 - 510 Toilet Clearance

410 rear

15.75"

10.5" 6.5"

270

21.75"-26.75"

43"-46"

170

21.5"

570

16"

7.25"-9.25" adjustable

5"

Length can be customized

26.25"

6

19.75" (18" wide) 18.75"

4"-5" adjustable

TUBBUDDY SB2 The TubBuddy (SB2) transfer system will turn your existing bathtub into an accessible bathroom in minutes. It allows you to enjoy showering again without the excessive cost, delay, and stress of a full bathroom remodel. The TubBuddy SB2 alleviates heavy lifting and multiple transfers. This chair is separated into three sections; rolling base (shower chair), bridge, and tub base. The rolling base rolls around the house like a wheelchair allowing patients to transfer and then roll right over most toilets easily. Once toileting is complete the rolling base connects to a bridge and onto the tub base allowing the chair to slide over the tub. When the patient is over the tub, the bridge disconnects, and the curtain can close to offer more privacy. TubBuddy (SB2) is a caregiver-assisted product; it is not intended for independent use.

Weight Capacity: 300 lbs.

SB2

7

780

26.75" 30.75"

Toilet clearnce For bath tubs higher than 21" use accessory RBE24 height extender

22.25"

570

18"

460

545

475 Between arms

6.75"

10.5"

18.75" Between arms

1115 - 1215

11.75"

300

18"

480

22.5"-26.5"

standard

Length can be customizedCan be customised

see accessories

14"-21"

17"

435 - 535 Toilet clearance

10"

680

21.5"

15.75"

1115 - 1215

430

12.5"-16.5"

9.5"

400

23.25"

17"-21"

845

13" 14.75"

375

17.25"-26.75"

19.25"

8

To increase height up to 630mm use accessory

SB2 DIMENSIONS

To increase height up to 25.75"use accessory TBE24 height extender

TUBBUDDY WITH TILT SB2T The TubBuddy with Tilt (SB2T) transfer system will turn your existing bathtub or curbed shower into an accessible bathroom in minutes. It allows you to enjoy showering again without the high cost, delay, and stress of a complete bathroom remodel. The TubBuddy SB2T alleviates heavy lifting and multiple transfers. This chair is separated into three sections; rolling base (shower chair), bridge, and tub base. The SB2T chair rolls around the house like a wheelchair allowing patients to transfer onto it easily. Once in the bathroom, the SB2T can roll over most toilets. When toileting is complete, the rolling base connects to the tub base allowing the chair to slide in a tilted position with legs raised and ready to move over the tub. Once over the tub/shower, the rolling base and bridge can be disconnected and rolled away so that the shower curtain can be closed or allow a caregiver the option to get closer to the patient. A custom bridge may be required if a toilet is too close or too far from the tub. The TubBuddy with Tilt (SB2T) is a caregiver-assisted product; it is not intended for independent use. Additional accessories available.

Weight Capacity: 300 lbs.

SB2T

9

SB2T DIMENSIONS 41.75" Extended standard footrests 37" Footrests rotated inward

22.5"

37" Tilted standard footrests

42.5"-46.5"

15"- 21.5" adjustable

15.57"-19.75"

Toilet clearance

*Footrests rotated inwards

17.25"-26.75"

10.5"

11.75"

standard

10.25" *5.5"

Side Stabilisers

6.75"

Length can be customised. see accessories.

14.75" 19.25"

33"

19"

14.25"-21"

17"

18.75"

25"-28.75"

19.5"

21.5"

15.75"

22.5"-31"

18"

Seat tilts 0-30 degrees

13" wide 27.5" long at base

490

For bath tubs higher than 19.75" use accessory RBE24 height extender

10

To increase height up to 24.75" use accessory TBE24 height extender

ROLL-IN SHOWERBUDDY WITH TILT SB3T The Showerbuddy SB3T rolling shower chair is designed for a curb-less/ accessible or roll-in shower stall. The SB3T rolls over most toilets for use as a commode and offers a tilt position that releases pressure for the user and improves comfort. The chair includes a standard front opening cushion, headrest, swing away and removable footrests, flip back and removable armrests, 4” lockable casters, removable commode, seat belt, and height adjustability. ShowerBuddy (SB3T) is a caregiver-assisted product; it is not intended for independent use.

Weight Capacity: 300 lbs.

ADJUSTABLE HEADREST

SB3T FLIP-BACK ARMREST

11

SB3T DIMENSIONS 41.75" Extended standard footrests 37" Footrests rotated inwards

22.5"

22.5"-31"

18"

52.75"-56.75" Tilted standard footrests

41.5"-45.5"

6.75"

9.5"

21.5"

15.75"

17"

Seat tilts up to 30 degrees

20"-24"

17"-21" Toilet clearance

15."-21.25" adjustable

14.75" 19"

11" *6.25"

33"

*Footrest rotated inwards

12

ROLL-IN SHOWERBUDDY LITE SB6C The Showerbuddy SB6c shower chair is designed for a curb-less/ accessible or roll-in shower stall. This shower chair features the same functions as an SB3T but at a fraction of the cost. The SB6C is more compact and lightweight than the SB3T. It measures at 22.5” at its widest point (armrest) allowing it to fit through doorways as narrow as 24”. The SB6C rolls over most toilets for use as a commode. This chair comes standard with a front opening cushion, swing away and removable footrests, clip-on calf strap, flip back armrests (not lockable), commode bucket with lid, pee guard, chest belt, and is height adjustable. ShowerBuddy (SB6C) is a caregiver-assisted product; it is not intended for independent use.

Weight Capacity: 300 lbs.

ADJUSTABLE HEIGHT

SB6C

13

SB6C DIMENSIONS 22.5"

35"

17.5"

18.5"

15.75"

41"

21"

7.5"

17"

14.25" 20"

adjustable

17.25"-21.25"

16.25"-19.25"

Toilet clearance

20"-23"

7.5"

25" 36.5"

14

ROLL-IN SHOWERBUDDY BARIATRIC XL and XXL

22" Seat Width

The ShowerBuddy Bariatric Shower Chair (SB6C-22) (SB6C-26) are designed for curb-less/accessible or roll-in showers. These chairs are intended for bariatric use and can accommodate patients up to 440 lbs.

The seat width ranges between 22” and 26". Both chairs can roll over most toilets to be used as a commode. The chairs come standard with a front opening cushion, swing away and removable footrests, a clip-on calf strap, lockable flip-back armrests, a commode bucket with lid, pee guard, chest belt, and is height adjustable. These ShowerBuddy Bariatric Shower Chairs are caregiver-assisted products; they are not intended for independent use.

Weight Capacity: 440 lbs.

SB6C-22 DIMENSIONS

SB6C-22 SB6C-26

26"

36.5"

18.5"

8.75"

10.25"

22" (arms)

4.75"

21"

21.5"

23"

15

17.75"-21.75" adjustable

16.25"-19.25" 17.5"

Toilet clearance

20"-23"

41"

17"

24" 35.75"

26" Seat Width

Both are lightweight and durable with a lifetime warranty on the frame.

SB6C-26 DIMENSIONS 30" 26" 38"

18.50"

8.75"

10.25"

21"

25.5"

17"

17.75"-21.75" adjustable

20"-23"

15.75"-18.75" Toilet clearance

41"

4.75"

22"

24.75"

26.25"

35.25"

16

ROLL-IN SHOWERBUDDY SOLO SB6W The Roll-In Buddy Solo (SB6W) shower chair is designed for a curb-less/accessible or roll-in shower stall. The SB6W can roll over most toilets to be used as a commode. It is a self-propelled shower chair and is designed for independent use. The SB6W includes two 24” drive wheels to allow the user safe and easy maneuvering throughout their home and restroom areas. The chair comes standard with a front opening cushion, swing away and removable footrests, a clip-on calf strap, flip back armrests (not lockable), a commode bucket with lid, pee guard, chest belt, and is height adjustable.

Weight Capacity: 300 lbs. *Fits over most toilets

ADJUSTABLE HEIGHT

SB6W

17

SB6W DIMENSIONS

43.25"-44.25"

20"-21"

25" 22.25" 18.5"

17.75"

15.75"

7.5" 8.5"

17"

adjustable

17.25"-21.25"

18.5"-19.5"

Toilet clearance

22.5"-23.5"

7.5"

14.25" 20"

32.25" 40.5"-41.75"

18

ROLL-IN ECO TRAVELER SB7E The ShowerBuddy Eco Traveler (SB7E) is designed for a curb-less/ accessible or roll-in shower stall. The SB7E can roll over most toilets to be used as a commode. It is lightweight yet sturdy, built with a strong aluminum frame, and intended for use during travel. It can fold away neatly into a travel bag (sold separately) or into a closet for storage purposes. Despite its small size, the SB7e still enjoys the premium 4" locking casters, commode bucket with a lid, as well as swing-away height adjustable footrests. The ShowerBuddy Eco Traveler (SB7E) is a caregiver-assisted product; it is not intended for independent use.

Weight Capacity: 265 lbs.

SB7E

19

530

17.5"

21.75" 445

550 440

adjustable

9" 450

420

13.25"- 17.25"

17.75" 6.75"

21.75"

Toilet clearance toilet clearance 420 - 470 (adjustable 340-440)

(adjustable 1000-1050)

adjustable

1000

16.5"-18.5"

(adjustable 530-580)

21"-22.75" adjustable

39.25"- 41.25"

OPTIONAL TRAVEL BAG

SB7E DIMENSIONS

550 840

18.5" 470 420

215

790

33"

170

16.5"

230

FOLDS UP

8.5"

31"

20

6.5"

POWER BATH-LIFT FOR THE BATHTUB

6.5"

2.5"

Available in Blue, Orange, Pink, White

2.5"

23.5 in

2.5"

23.5 in

11.5"

23.5 in

11.5"

18.75"

42" 18.75"

42"

42"

11.5"

13" 18.75"

14.5" 27.5"

21

13" 14.5" 27.5" 13"

14"

6.5"

The BathLyft is a battery-operated bath chair that lowers and lifts the user in and out of the bathtub, reducing the strain on the user and preventing the risk of falls. The stable frame and base-plate ensure 23" the user’s stability and safety, while the padding and optimized dimensions ensure a comfortable bathing 28.5" experience. The Bathlyft’s superior design allows for a backrest recline of up to 52° and lowers into the 23" tub with a minimum sitting position of 2.75" from the bottom. The side flaps move into and out of place to 28.5" create a transfer surface allowing the user even more peace of mind. The water-tight hand control floats in the tub for easy access while bathing and will provide the 23" user with approximately 35 lifts on a single charge. The built-in safety switch will prevent use if the battery is too low to perform a full lift. The two28.5" piece construction makes this lift easy to assemble, disassemble, store, and transport. Set-up is tool-free and ensures easy installation and operation.

Weight Capacity: 300 lbs.

M1 pure grey

SB’s line of designer shower stools allows for a sleek, sophisticated and modern solution to an age-old problem: safety, comfort, and dignity while showering. Refine is available in two different variations as well as three colors to suit your designer washroom needs. Refine chairs are 16" high and have a 300lb weight capacity. With superb structural quality, you can rest assured that Refine stools will provide the extra support and stability needed for daily showering. Refine shower chairs require no assembly and have adjustable feet to prevent wobbling. Refine chairs are easy to clean and maintain and will not rust or corrode. all models available in white, pure grey, and concrete

M2

concrete 22

(903) 454-2096

lollypopmed.com