Compressed breathing air and systems
INFO:
https://www.youtube.com/CO monitor
In-line CO monitoring systems must have an audible & visual alarm set to 5 ppm.
Carbon monoxide monitoring CSA Z180.1:19 Canadian standards require that all compressed breathing air systems, that use an oil lubricated compressor or any other lubrication shall be continuously monitored for carbon monoxide.
CSA guidelines state that the compressed air breathing system be continuously monitored for CO.
Whether you are using a SATA air vision 5000 or a SATA vision 2000 with air supplied by a compressor through a SATA filter system you MUST have an in-line CO monitor to be compliant and safe in the booth.
Both our X767-Plus and X288 carbon monoxide monitor models have an electrochemical sensor that measures CO as well as paint fumes and hydrocarbons.
The X767-Plus is well suited for larger shops with multiple booths. The X288 Sentinel is recommended for a single booth shop.
Overall SATA filtration systems paired with a SATA supplied air respirator and a SATA carbon monoxide monitor is the best protection available to a paint technician.
X767-Plus
Technical Data: X767 Co Monitor
Gas detected: CO in compressed air
Detection Principle: 3 electrode electrochemical
Alarm: preset to 5 ppm with an LCD Display
Warranty: 1 Year
Power: 110 volt AC
Operating Temp: -1° - 49° C
Dimensions: 4” x 6” x 3.5” inches
Powder-coated metal housing
Meets 29 CFR 1910.134 requirements for CO monitoring of compressed breathing air.
Audible and visual alarms for high CO or sensor failure. RFI filtered from interference of cell phones, two-way radios, etc.
LCD digital readout in 1 ppm increments with response time of 10 seconds to 95% proven reliable performance electrochemical sensor. Calibration recommended every 6 months. Remote alarm options available
Technical Data: X288 Sentinel Co Monitor
Gas detected: CO in compressed air
Detection Principle: CO specific electrochemical
Alarm: preset to 5 ppm with an LCD Display
Warranty: 2 Years
Power: battery operated
Operating Temp: -20° - 50° C
Dimensions: 5.88” x 4.06” x 2.12” inches
Polycarbonate case
Device conforms to UL STD 913; Certified to CSA STD C22.2 No. 157 Intertek/ETL control number 4004813
Alarm set at 5 ppm (adjustable between 5-10 ppm) with an LCD Display
Battery-operated, can be surface mounted on outer wall of paint booth or close to air supply. Alarms: audible, visual and vibrating (battery life 2 years depending on alarm conditions).
Display: LCD digital readout in 1 ppm increments, initial response time < 5 seconds, response time < 20 seconds
Carbon Monoxide Monitor Accessories
X81-1233K
Calibration kit for Carbon Monoxide Monitor
XA176
Standard 85 db remote alarm for Carbon Monoxide Monitor
XA176A
Extra loud 100 db remote alarm for Carbon Monoxide Monitor
Extra loud 120 db air horn w/regulator for Carbon Monoxide Monitor. Call for availability (this alarm only)
Siren alarm with strobe light
