Cognitive map

The kids in this space are from the community who shall have a more peacefule play area. They are desianed for small kids who dont create a lot of noise around. they are kept in the top most region to initiate enough hook to move upstairs

The Elderly people are considered for this space, usage of ramps is necessary to initiate the flow between the parks on both ends,seperate stairs and This park is primarily for commercial travellers who shall come here to sit and have the food being served, there is also the usage of a bifurcated stairs.

The plotted Houses is a typology specifically developed for the residents of the old brahmapuri who have been locals they are the reason fot the inclusion of this sort of a typology in other wise dense region.

EWS-Mixed use commercial housing typology -3

Mixed use typology is the first which is visible to people. they are the reason for the increase or rather extention of the food street on the opposite side of the road. Also these flats are included in a more of a complex.

Raised center medians and pedestrian refuge islands can be used to reduce lane width for vehicles, even on relatively narrow streets. They can also be used to organize traffic at intersections or to block access at strategic points. Mini roundabouts are round islands at intersections that serve to both reduce speeds and organize traffic, routing vehicles around the island rather than directly across the intersection.

Commercial complex

Pinchpoints narrow the roadway at a mid-block point. They can be combined with speed tables to create high-quality pedestr an crossings. They can also be used on low-volume, two-way streets to require facing motorists to yield to one another Chicanes and lane shifts use alternating parking, curb extensions, or edge islands to form an S-shaped path of travel which lowers vehicle speeds.

Devlopment of civic corridor

Buildings at the right-of-way with articulated facades and windows indicate that a street is in an urban environment, not a highway. Gateway treatments alert drivers that they are entering a slower area. This treatment may include signage, entry portals, speed tables, raised crossings, and curb extensions.

Connections establishment

Speed humps are formed by raising sections of the road in a sinusoidal shape, typically 10-15 cm high and 4-6 m long. The dimensions can be tailored to match the target speed of the street. They are typically constructed of the same material as the roa way, but can be of different materials.

Studio house project for an architect OAK AND STONE

TYPE : College academic project | Individual project

YEAR : 2020 | 3rd Yr of B.Arch

LOCATION : Bangalore, Karnataka, India

The design brief of this semester was to design a studio house cum residence for an individual whose profession is also architecture. So, we were given a brief for studio house at our third semester that should be designed in an area of 200sqm. and a permissable ground coverage of 75% and the required aspects that should be designed In that building was an office,pantry, studio, living , bedroom and toilet. The concept of ‘Oak and studio’ is to give a new look to the conventional studio houses, that takes the shape of rectangles in this design. I would love to design a studio house that would be in an environment of nature and life invloved more in it and I designed the same too.

In this studio house , i decided to be used for a single person who works also as an architect and by that design , he would customisly change the spaces such as modifying the dimensions of a room and the other spaces. In this plan and section illustration ,I’ve showed the space segregation properly onto the plan.

Modular housing design challenge URBAN BOX

TYPE : College academic project | Individual project

YEAR : 2021 | 3rd Yr of B.Arch

LOCATION : ECR, Tamil Nadu, India

The design brief of this semester was to design a future housing challenge. As the population is increasing drastically in the world . we need a housing which is done in no time and of Immediate necessity. Currently many technologies and concepts are revolving around modular homes and we are givne to design a modular home that can be constructed in any form or layout, as a stand-alone entity or Integrated.

The concept of ‘Urban house’ is to built a new face to the modular and public mini houses.So , Cve designed a thing that gives the purpose of housing , that is modular. can be incrementalized as of increasing from Ibhk to 2bhk and stacking them up.

The aim was to design a stack of modular house that would be able to be stackable upon one another to form a tower or mid - rise structure, such that the usage of ground space can be reduced drastically.

Modularity is an important case in the construction of this design and the materials used here are : Structurally insulated panels (SIP),timber wood ,steel, wooden fixtures, glass panels, carpet flooring.

Dynamically , this deisgn was supposed to be arranged in a way that , it should be dynamically changed or increased fromone BHK to two BHK while increasing the carpet area too.

For the stack arrangement , i’ve arranged the single and double unit modules on top of each other as random grid arrangement , so that in the overall composition , it would form a volume of blocks arranged in a grid.