HOW TO CLEAN AND MAINTAIN YOUR BICYCLE AT HOME

HOW TO CLEAN AND MAINTAIN YOUR BICYCLE AT HOME If you spend a lot of time riding the bicycle more often than a plan to clean the bicycle more frequently. Especially in wet and muddy conditions, cleaning the bicycle is a must. Bicycles contain many movable parts and all are used during the ride. Keeping your bike parts properly cleaned and lubricated for good performance. Lubrication protects moving parts from excessive wear caused by friction, prevents them from “freezing up,� and helps keep rust and corrosion at bay. Bicycle riders should check, How to clean and maintain your bicycle at home.

Bicycle on Rent in Pune and PCMC

Accessories required

Clean clothes: Keep plenty of these handy for grease, wax, and oil-related stuff. Your hands will get protected due to this.

Hand gloves: Wear hand gloves so your hands will not get dirty while cleaning the bicycle. Bike oil is a nightmare to get out from under your nails. If it’s too late for that, scrub your hands with washing up liquid and sugar, only adding water right at the end.

Brushes: Old Toothbrush will work great. Have several sizes to clean the places where the hand is not reachable easy.

Water: Used water properly as high pressure can damage sensitive and small parts.

Bicycle wash cleaner: Use diluted dishwashing soap or wash cleaner for frame cleaning.

Chain lubricant: Extend the life of the chain using chain lubricants. Wet lube is best to use when riding in the wet condition. When the dirt sticks to it, make sure to clean the dirt using a cloth. Dry lube can be used in a dry environment. Less dirt gets stick to it but in case if the rain comes, it can easily remove the dry lubricant.

Excess lubricant It is one of the most important parts of How to clean and maintain your bicycle at home. Overlubricating can lead to poor performance and component damage. If you use excess lubricant than it will attract dirt and other particles. Performance may decrease due to this. Excess lubricant should be carefully wiped.

What parts need to clean?

Dry clothes can be used to clean dirty bicycle components. Other parts may require brushing and scrubbing. Washing with high pressure can damage sensitive components, so used it carefully. It consists of the below steps: 1. Clean your frame 2. Clean and use lubricant to the chain 3. Use lubricant to your brake and derailleur levers

Sufficient tire pressure You need to maintain sufficient tire pressure. The most important thing you can do, as it can affect the quality of the bicycle. If the pressure is low then you have to use energy to maintain the sufficient speed. The rear tire should have more pressure as it is taking more of the rider’s weight than the front. You can check the tire pressure at least once every two weeks. An essential tool you should have is a quality pump with a pressure gauge.

Adjust brakes correctly You need to check brakes correctly. Adjust if needed and change breaks pads if necessary.

Mandatory checks before the rainy season start. It is also important to keep both the pads and the braking surface clean from dirt and oil. Dirty pads wear out themselves and the braking surface substantially faster.

No one is born with comprehensive bicycle mechanic skills. That is something you have to learn by doing easy bicycle maintenance yourself, or more preferably by being taught by someone with experience. Practice these skills often. If you have a tight schedule get your bicycle servicing done minimum once in 2-3 months for the legibility of your bicycle. At the end take care of your bike and it will take care of you.

Bicycle renting starts only at 39/49/59 Rs daily if booked for a Month at Sanrocycles. Doorstep Pickup and drop available. You can hire a Bicycle Rent in Pune or Pimpri-Chinchwad and start riding the bicycle. You can also book a bicycle online and Rent a bicycle. Online bicycle store in Pune from which you can book a bicycle at a reasonable price.