Issuu

Lighting & Electrical

Lighting & Electrical Contents Cameras

321

Seaview

323

Sionyx Nightwave Night Vision Camera . . . 321-322 Radar Tower Kits. . . . . . . . . . . 324-327 Modular Base Mounts . . . . . . . . . . 328 Modular Base Mounts & Accessories. . . . . 329 Modular Mount . . . . . . . . . . . . 330 Top Plates . . . . . . . . . . . . . . 331 Top Plates . . . . . . . . . . . . . . 332 Light Bars & Accessories. . . . . . . . 333-335 Light Posts . . . . . . . . . . . . . . 336 Spreader Kits . . . . . . . . . . . . . 336 Thermal Camera Mounts. . . . . . . . . 337 Low Profile Adapters & Accessories . . . . . . 338 Direct Radar Mount Wedges. . . . . . . . 338 Mast Platforms & Accessories. . . . . . . . 339 Starlink Accessories . . . . . . . . . . 340-344 Cable Seals. . . . . . . . . . . . . 345-346 Sail, Deck & Rail Pods. . . . . . . . . 347-350 Antenna Rail Clamp. . . . . . . . . . . 350 Vault Drain Plug . . . . . . . . . . . . 350

LED Exterior & Interior Lights

351

Flood/Awning Lights . . . . . . . . . . . 351 Awning Lights. . . . . . . . . . . . . 352 Ceiling Lights . . . . . . . . . . . . . 353 Interior Lights. . . . . . . . . . . . 354-356 Reading Lights. . . . . . . . . . . . . 357 Reading & Door Handle Lights. . . . . . . . 358 Door Handle & Strip Lights. . . . . . . . . 359 Strip, Bimini Lights & Dimmer Switches . . . . 360

LED Marine Lights

361

Work & Flood Lights

366

Spot Lights

369

Navigation Lights

371

Underwater Lights. . . . . . . . . . 361-364 Docking & Courtesy Lights. . . . . . . . . 365

Mako Series LED Deck Floodlights . . . . . . 366 Mako Series LED Light Bars. . . . . . . 367-368

Remote Spot Light. . . . . . . . . . 369-370 Manual Spot Light. . . . . . . . . . . . 371 LED Navigation Lights . . . . . . . . . 371-372 LED Navigation - Anchor Lights . . . . . . 373-374 LED Navigation - Tri-Colour/Anchor Light . . . . 375 Navigation Lights - Large Vessel. . . . . 375-376

Bulb Replacement

377

LED Truck & Trailer Lights

378

Gauges

380

LED Replacement. . . . . . . . . . . . 377 LED Trailer Lights . . . . . . . . . . . . 378 Truck & Trailer Lights. . . . . . . . . . . 378 Truck, Trailer, Marker & Number Plate Lights. . . 379 Kus Gauges. . . . . . . . . . . . 380-382 Kus Gauges Panels & Accessories. . . . . . . 383 Kus Gauge Accessories. . . . . . . . . . 384

Tank Senders

385

NMEA 2000 Gauges

387

Tank Senders . . . . . . . . . . . . .

386

NMEA 2000 Gauges & Accessories . . . . . . 388

Wiper Systems

389

Horns & Trumpets

396

Caframo Fans

397

Blowers

399

Switches

400

Sockets & Chargers

413

Electrical Accessories

418

Electrical Wiring & Accessories

423

Pacific Aerials

431

LED Home & Commercial Lighting

439

Single Drive System . . . . . . . . . 389, 391 Wiper Kits . . . . . . . . . . . . . . 390 Dual Drive Systems . . . . . . . . . . . 392 Wiper Accessories. . . . . . . . . . 393-395 Horns & Trumpets. . . . . . . . . . . . 396 Sirocco II Fans. . . . . . . . . . . . . 397 Bora & Ultimate Fans. . . . . . . . . . . 398 Inline Blowers & Ventilation Hose . . . . . .

399

Isolator Switches. . . . . . . . . . . 400-402 Voltage Sensitive Relay . . . . . . . . . . 401 Push Button Switch Panels . . . . . . . . . 403 Push Button Switches. . . . . . . . . . . 404 Push Button, Dimmer & Membrane Panel Switches. . . . . . . . . 405 Switches Panels. . . . . . . . . . . 406-407 Carling/Rocker Switches. . . . . . . . 407-408 Push/Pull, Ignition, Toggle & Safety Cut Off Switches. . . . . . . . 408-409 Winch Switches, Remotes, Solenoids & Connectors. 410 Connectors. . . . . . . . . . . . . . 411 Notes . . . . . . . . . . . . . . . . 412 Flush Mount Sockets & Chargers. . . . . 413-414 Surface Mount Sockets & Chargers. . . . . . 415 Wireless Phone Chargers . . . . . . . . . 416 Surface Mount Sockets & Chargers. . . . . . 416 Wireless Phone Chargers . . . . . . . . . 417

Terminal Studs . . . . . . . . . . . . . 418 Bus Bars & Fuse Boxes . . . . . . . . . . 419 Fuse Boxes . . . . . . . . . . . . . . 420 Terminals, Fuses & Fuse Holders. . . . . . . 421 Circuit Breakers, Battery Terminals & Battery Boxes . . . . . . . . . . . . . 422 Battery Trays . . . . . . . . . . . . . 423 Antenna Accessories & Braided Sleeves . . . . 423 Split Loom & Cable Glands . . . . . . . . . 424 Electrical Tap, Clips & Cable Ties . . . . . . . 425 Heat Shrink & Battery Lugs. . . . . . . . . 426 Terminals. . . . . . . . . . . . . . . 427 Waterproof Terminals, Wire Crimpers & Strippers. 428 Marine & Automotive Electrical Cables. . . 429-430 Electric Antenna Mount. . . . . . . . . . 431 Pacific Aerials Antennas. . . . . . . . 431-437 Pacific Aerials Accessories & Radar Mounts . . . 438 Solar Lighting . . . . . . . . . . . . 439-442 Down Lighting & Exterior Lighting . . . . . . 443 Exterior Lighting. . . . . . . . . . . . 444 Commercial Lighting . . . . . . . . . . . 445 Notes . . . . . . . . . . . . . . . . 446

www.samallen.com.au

320

Cameras

Sionyx Nightwave Night Vision Camera Camera - Nightwave Night Vision

Nightwave Spec Video

About Sionyx Nightwave

Power & Video Output Options

The Nightwave is an ultra low-light camera built around SIONYX's patented Black Silicon CMOS sensor. With flexible mounting options and easy setup, Nightwave can seamlessly integrate with major brand MFDs via the analogue video output, displaying clear colour digital night vision.

Powering the Nightwave with 12V DC and using the analogue video output is the preferred method for integration with onboard electronics (The preferred video output must be selected using the Sionyx App).

Designed to give both professional mariners and everyday boaties the ability to spot hazards and debris in moonless starlight without white light or expensive thermal cameras. The Nightwave will help mariners in boats small and large to navigate safely, avoiding collisions, and maximising time on the water. With IP67 rating, you can feel safe knowing that your camera can get wet.

Lighting & Electrical

With the SIONYX Nightwave, you will be able to spot a man-sized object from 150m away*. The 44° field of view increases situational awareness so you can spot unexpected markers, vessels, land formations and more. IP67 rated, submersible to 1 metre for 30 minutes, you can safely use Nightwave in inclement weather conditions.

MFD Compatibility The SIONYX Nightwave is compatible with major brand MFDs. In most cases, your MFD must have an analogue video input to receive and display the video feed from Nightwave. Additionally, HDMI inputs can be used in conjunction with an RCA to HDMI converter. Scan the QR code to see the MFD Compatibility range - If it's not listed please send the MFD model number to sales@samallen.com.au to confirm the MFD compatibility.

If you wish to power the Nightwave via USB through a PC/laptop, the analogue video output option with not be available. Power Options

Wifi Streaming

USB Video Out

Analogue Video Out

12V DC

Yes

USB

Yes*

Yes**

When The Nightwave Is Powered with 12V DC Using Factory-Installed Cable • WiFi live video streaming is available via the SIONYX App • USB video output is not available • Analogue video output is available via the SMA/BNC/RCA connector on the factory-installed cable When The Nightwave Is Powered with USB (5V DC) Using The Provided USB Cable • WiFi live video streaming is available when selected in the SIONYX App (*If WiFi video is selected via the App, USB video will NOT be available) • USB video out can be used when the camera is plugged into a host device (**If USB video is selected via the App, WiFi video streaming will NOT be available) • Analogue video output is not available in this mode

Download The Sionyx Mobile App

Behind The Lens

Apple

Android

The SIONYX XQE-1350 image sensor features unmatched ultra low light imaging technology and breakthrough sensitivity in the 800nm - 1,100nm range. This sensor enables digital fusion capability, high QE detection for instrument-industrial vision, and all use cases of traditional I2 tube-based night vision. You wont miss a thing with the 30Hz frame rate, 1280 x 1024 resolution and a 44° field of view. Temporarily Mounted with Ram Mount Ram Mount’s not included

Permanently Mounted with Bulkhead Mount

321

Ball up

Ball down

Ram Tough-Claw

www.samallen.com.au

Ram Tripod

Sionyx Nightwave Night Vision Camera

Without Nightwave

152mm

Ø 127mm

Sionyx Nightwave Night Vision Camera Part No.

Description

Colour

Volts (V) DC

USB

Weight Dimensions (G) H x Ø (mm)

970100 Nightwave Night Vision Camera

White

870

152 x 127

970102 Nightwave Night Vision Camera

Grey

870

152 x 127

970104 Nightwave Night Vision Camera

Black

870

152 x 127

• Can detect (man) sized objects up to 150m with a 1/4 moon*. • 30Hz FPS @ 1280 x 1024 XQE-1350 BSI CMOS sensor. • 16mm F/1.4 lens • 30Hz FPS @ 640 x 640 NTSC video out. • 10m to infinity focus range with a 400-1200NM visible spectrum. • SMA / BNC / RCA analogue video connections. • Wireless via WiFi + Bluetooth. • UV resistant polycarbonate. • Multiple mounting options. • Operating temp: -20°C to +50°C. • 5m Tinned copper wire. • Shock and vibration: IEC60945 (V15G | H:9G) |IK08. • Protection Rating: IP67. NOTE:*Tested under clear weather.

970100

Kits Include: • SIONYX Nightwave Ultra Low-Light Marine Camera • Analogue Video Cable [5M] • SMA to BNC adapter • BNC to RCA adapter • Power Fuse & Fuse Holder • Digital Video Cable USB [3M] • Base Gasket • Mounting Hardware • User Manual • Install Template

970102

970104

Sionyx Nightwave Vinyl Cover Part No.

Description

Lighting & Electrical

With Nightwave

Colour

970101 Nightwave Vinyl Cover

Grey

970105 Nightwave Vinyl Cover

Black

• Designed specifically for the Nightwave camera with a tightening strap for a snug and secure fit, our vinyl slip-on covers provide long-lasting protection against water, dust, dirt, and UV rays. • Choose black or white to match your vessel and protect your night vision investment when you're docked and in long-term storage.

970101

970105

Sionyx Nightwave Power and Analogue Video Cable Part No.

Length (m)

Description

970107 Nightwave Power and Analogue Video Cable

970108 Nightwave Power and Analogue Video Cable

970109 Nightwave Power and Analogue Video Cable

NSE/NSS Video/Data Cable for SIONYX 970110 Simrad Nightwave Camera

• Power and analog video replacement cable for Nightwave.

www.samallen.com.au

970110 970107

322

Seaview Seaview

ELEVATE YOUR ELECTRONICS

ELEVATE YOUR ELECTRONICS Seaview is the global leader in designing and manufacturing mounting solutions for marine electronics. Seaview offers hundreds of installation options for optimal positioning of radar, satellite and tv domes, GPS, VHF, camera, searchlights and navigation lights. Seaview mounting solutions will not only provide unmatched strength and durability but look elegant, complementing the styling of your boat. Working closely with all major electronic manufacturers, we offer an innovative range of high quality products for powerboats, sailboats, yachts, commercial and military vessels. While we offer a comprehensive selection of standard mounts, we also offer personalized mast solutions where the standard mounts may not be suitable. You will find Seaview mounting systems aboard many of the finest yachts around the world.

Lighting & Electrical 323

Seaview supporting the world’s leading marine electronic manufacturers!

www.samallen.com.au

Watch About Us Video

Radar Tower Kits Aft Leaning Radar Tower Kits for Closed Dome/Open Array Radars - 150mm High Model

Colour

Overall Dimensions W x H x D (mm)

970960

PMA57M1 + ADAR1

White

305 x 148 x 300

ADAR1

PMA57M1

240 x 124 x 178

970962

PMA57M1BLK + ADAR1BLK

Black

299 x 150 x 297

ADAR1BLK

PMA57M1BLK

240 x 124 x 178

Part No.

Modular Plate

Seaview Mount

Mount Dimensions W x H x D (mm)

These Seaview Radar Towers combine a modular tower mount and a Modular top plate. Compact design results in the perfect solution for vessels which have a limited space to work with. Available in either white or black. • Aft learning, powder coated, cast aluminium modular mount with an oval hollow mast section allowing for easy cable management. • White Closed Dome/Open Array Radar Modular top plate is UV stable, glass filled ABS plastic encased 6.4mm aluminium plate. • Black Closed Dome/Open Array Rador Modular top plate is marine grade, high density polyethylene board. • Modular design allows the user to only change the top plate when swapping to a different radar. • Light Bar compatible. • Includes a self-draining waterproof cable seal base plate. • 10g Tube of Tef-Gel marine corrosion inhibitor included. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

Self-draining waterproof cable seal base plate

Modular Plate Hardware Kit

Forward Leaning Radar Tower Kits for Closed Dome/Open Array Radars - 150mm High Model

Colour

Overall Dimensions W x H x D (mm)

970964

PMF57M1 + ADAR1

White

305 x 148 x 300

ADAR1

PMF57M1

240 x 124 x 178

970966

PMF57M1BLK + ADAR1BLK

Black

299 x 150 x 297

ADAR1BLK

PMF57M1BLK

240 x 124 x 178

Part No.

Modular Plate

Seaview Mount

Mount Dimensions W x H x D (mm)

These Seaview Radar Towers combine a Modular tower mount and a Modular top plate. Compact design results in the perfect solution for vessels which have a limited space to work with. Available in either white or black. • Forward learning, powder coated, cast aluminium modular mount with an oval hollow mast section allowing for easy cable management. • White Closed Dome/Open Array Radar Modular top plate is UV stable, glass filled ABS plastic encased 6.4mm aluminium plate. • Black Closed Dome/Open Array Rador Modular top plate is marine grade, high density polyethylene board. • Modular design allows the user to only change the top plate when swapping to a different radar. • Light Bar compatible. • Includes a self-draining waterproof cable seal base plate. • 10g Tube of Tef-Gel marine corrosion inhibitor included. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. * Self-draining waterproof cable seal base plate

Lighting & Electrical

ELEVATE YOUR ELECTRONICS

Modular Plate Hardware Kit

ELEVATE YOUR ELECTRONICS

www.samallen.com.au

324

Radar Tower Kits Aft Leaning Radar Tower for Closed Dome/Open Array Radars - 280mm High Part No.

Model

Colour

Overall Dimensions W x H x D (mm)

Modular Plate

Seaview Mount

Mount Dimensions W x H x D (mm)

970970

PMA107M1 + ADAR1

White

305 x 279 x 300

ADAR1

PMA107M1

178 x 254 x 294

This Seaview Radar Tower combines a Modular mount and a Modular top plate. Compact design results in the perfect solution for vessels which have a limited space to work with. • Aft leaning, powder coated welded aluminium Modular Mount with an oval hollow mast section allowing for easy cable management. • Closed Dome/Open Array Radar Modular top plate is UV stable, glass filled ABS plastic encased 6.4mm aluminium plate. • Modular design allows the user to only change the top plate when swapping to a different radar. • Light Bar compatible. • Includes a self-draining waterproof cable seal base plate. • 10g Tube of Tef-Gel marine corrosion inhibitor included. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

Self-draining waterproof cable seal base plate

Modular Plate Hardware Kit

ELEVATE YOUR ELECTRONICS

Forward Leaning Radar Tower for Closed Dome/Open Array Radars - 280mm High

Lighting & Electrical

Part No.

Model

Colour

Overall Dimensions W x H x D (mm)

Modular Plate

Seaview Mount

Mount Dimensions W x H x D (mm)

970974

PMF107M1 + ADAR1

White

305 x 279 x 300

ADAR1

PMF107M1

178 x 254 x 294

This Seaview Radar Tower combines a Modular mount and a Modular top plate. Compact design results in the perfect solution for vessels which have a limited space to work with. • Forward leaning, powder coated welded aluminium Modular Mount with an oval hollow mast section allowing for easy cable management. • Closed Dome/Open Array Radar Modular top plate is UV stable, glass filled ABS plastic encased 6.4mm aluminium plate. • Modular design allows the user to only change the top plate when swapping to a different radar. • Light Bar compatible. • Includes a self-draining waterproof cable seal base plate. • 10g Tube of Tef-Gel marine corrosion inhibitor included. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

Self-draining waterproof cable seal base plate

ELEVATE YOUR ELECTRONICS

325

www.samallen.com.au

Modular Plate Hardware Kit

Radar Tower Kits Vertical Radar Tower for Closed Dome/Open Array Radars - 150mm High Part No.

Model

Colour

Overall Dimensions W x H x D (mm)

Modular Plate

Seaview Mount

Mount Dimensions W x H x D (mm)

970968

AM5M1 + ADAR1

White

305 x 151 x 300

ADAR1

AM5M1

204 x 127 x 204

This Seaview Radar Tower combines a Modular mount and a Modular top plate. Compact design results in the perfect solution for vessels which have a limited space to work with. • Straight, powder coated welded aluminium Modular Mount with an oval hollow mast section allowing for easy cable management. • Closed Dome/Open Array Radar Modular top plate is UV stable, glass filled ABS plastic encased 6.4mm aluminium plate. • Modular design allows the user to only change the top plate when swapping to a different radar. • Light Bar compatible. • Includes a self-draining waterproof cable seal base plate. • 10g Tube of Tef-Gel marine corrosion inhibitor included. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

Modular Plate Hardware Kit Self-draining waterproof cable seal base plate

Vertical Radar Tower for Closed Dome/Open Array Radars - 330mm High Part No.

Model

Colour

Overall Dimensions W x H x D (mm)

Modular Plate

Seaview Mount

Mount Dimensions W x H x D (mm)

970978

AM12M1 + ADAR1

White

305 x 330 x 300

ADAR1

AM12M1

204 x 305 x 204

Lighting & Electrical

ELEVATE YOUR ELECTRONICS

Modular Plate Hardware Kit Self-draining waterproof cable seal base plate ELEVATE YOUR ELECTRONICS

www.samallen.com.au

326

Radar Tower Kits Aft Leaning Radar Tower - Fold Down Light Bar with Sionyx Mount Overall Dimensions W x H x D (mm)

Part No.

Colour

Modular Plate

970980

White

305 x 789 x 300

ADAR1

970982

Black

299 x 789 x 297

ADAR1BLK

Light Bar

Mount Dimensions W x H x D (mm)

PMA57M1

LTBSXN

240 x 124 x 178

PMA57M1BLK

LTBSXNBLK

240 x 124 x 179

Seaview Mount

These Seaview Radar Tower kits combine a Seaview Modular tower mount, a Modular top plate and a fold down Sionyx Nightwave camera and combination masthead/anchor light mount. Compact design results in the perfect solution for vessels which have a limited space to work with. Available in either white or black. • Aft leaning, powder coated cast aluminium Modular Mount with an oval hollow mast section allowing for easy cable management. • White Closed Dome/Open Array Radar Modular top plate is UV stable, glass filled ABS plastic encased 6.4mm aluminium plate. • Black Closed Dome/Open Array Radar Modular top plate is marine grade, high density polyethylene board. • Sionyx Nightwave camera mount and combination masthead/anchor light bar includes tension clamp to facilite folding to reduce height for storage. • Modular design allows the user to only change the top plate when swapping to a different radar. • Includes a self-draining waterproof cable seal base plate. • 10g Tube of Tef-Gel marine corrosion inhibitor included. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion.*

Lighting & Electrical 327

ELEVATE YOUR ELECTRONICS

www.samallen.com.au

Modular Base Mounts Modular Base Mounts - Aft Raked - 124mm High Base Plate (mm)

Mounting Plate Dimensions L x W (mm)

Overall Dimensions W x H x D (mm)

Part No.

Model

Colour

970814

PMA57M1

White

178 x 178

195 x 127.5

178 x 124 x 240

Black

178 x 178

195 x 127.5

178 x 124 x 240

970815 PMA57M1BLK

Specifically designed minimise the amount of space required to set up a mount. The oval hollow mast section allows for easy cable management. • Aluminium casting with a choice of white or black powder coated finish. • Modular design allows the user to only change the top plate when swapping to a different radar. • Light Bar compatible. • Includes a self-draining water proof cable seal base plate. NOTE: ** Top plate is not included with the base unit and is sold separately - refer Page page 332** *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

ELEVATE YOUR ELECTRONICS

Modular Base Mounts - Forward Raked - 124mm High Mounting Plate Dimensions L x W (mm)

Overall Dimensions W x H x D (mm)

Model

Colour

970831

PMF57M1

White

178 x 178

195 x 127.5

178 x 124 x 240

Black

178 x 178

195 x 127.5

178 x 124 x 240

970832 PMF57M1BLK

Modular Base Mounts - Aft Raked Part No.

Model

Colour

Base Plate (mm)

Mounting Plate Centre to Centre L x W (mm)

Overall Dimensions WxHxD (mm)

970802

PMA107M1

White

178 x 178

127 x 127

178 x 254 x 294

970808

PMA167M1

White

178 x 178

127 x 127

178 x 406 x 366

970811

PMA247M1

White

178 x 178

127 x 127

178 x 612 x 462

970812 PMA3610M1

White

254 x 254

165 x 165

203 x 920 x 616

Lighting & Electrical

Base Plate (mm)

Part No.

Specifically designed to minimise the amount of space required to set up a mount. The oval hollow mast section allows for easy cable management. • Cast aluminium top, extruded aluminium mast and aluminium plate base, welded together with white powder coated finish. • Modular design allows the user to only change the top plate when swapping to a different radar. • Light Bar compatible. • Includes a self-draining water proof cable seal base plate. NOTE: ** Top plate is not included with the base unit and is sold separately ** *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

ELEVATE YOUR ELECTRONICS

www.samallen.com.au

328

Modular Base Mounts & Accessories 4° Base Wedges

Hinge Adapter - 178 x 178mm Base Plate

Part No.

Model

of Base Plate Colour Angle Wedge (mm)

Wedge Thickness H (1-2) (mm)

Part No.

Model

Colour

Base Plate (mm)

Dimensions W x H x D (mm)

970840

PMW47

White

4°

970839 PMW410 White

4°

178 x 178

19-3

970834

PMH7

White

178 x 178

222 x 67 x 241

254 x 254

24-6

The Seaview Hinge Adaptor is the ideal solution for someone who needs extra height clearance when storing their vessel. This allows the user to have their Seaview mount hinge backwards. • Fits most 124-610mm tall Seaview Radar Mounts. • The Hinge Adaptor can tilt back 180° allowing maximum clearance possible. • With Seaview's captive knob design you do not need tools and these will stay with the hinge when it is opened or closed. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

4° base wedge that fits between your Seaview mount base plate and your vessel. The most common planning attitude requires 3° ~ 4° of adjustment. • Pre-drilled mounting holes allow for quick and easy installation • Made from marine-grade starboard polymer board. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

970840

970839 ELEVATE YOUR ELECTRONICS

ELEVATE YOUR ELECTRONICS

Removable Mount - 178 x 178mm Base Plate Model

Colour

Base Plate (mm)

Dimensions L x W x H (mm)

970944

PMRB7

White

178 x 178

254 x 203 x 74

Lighting & Electrical

Designed with a self-draining waterproof base, these removable bases make removing/servicing/securing/installing high-value marine electronics easier than ever. Four captive knobs for easy and quick release without fear of losing a knob. • Pre-drilled to fit Seaview Mounts with 178 x 178mm base plate. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

ELEVATE YOUR ELECTRONICS

Modular Base Mounts - Vertical Overall Dimensions WxHxD (mm)

203

195 x 127

203 x 127 x 203

203

195 x 127

203 x 305 x 203

203

195 x 127

203 x 458 x 203

Plate Ø Colour Base(mm)

970731

AM5M1

White

970729

AM12M1

White

970730

AM18M1

White

Specifically designed to minimise the amount of space required to set up a mount. Oval hollow mast section allows for easy cable management. • Cast aluminium top, extruded aluminium mast and aluminium plate base, welded together with white powder coated finish. • Modular design allows the user to only change the top plate when swapping to a different radar or satdome. • Light Bar compatible. • Includes a self-draining water proof cable seal base plate. NOTE: ** Top plate is not included with the unit and is sold separately ** *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

970730

ELEVATE YOUR ELECTRONICS

Mounting Plate Dimensions L x W (mm)

Model

Part No.

970731

329

Part No.

Self-draining waterproof cable seal base plate

www.samallen.com.au

Modular Mount Modular Radar Dual Mount Tower - 336mm High Model

Colour

Base Plate (mm)

Dimensions WxHxD (mm)

970823

PMADM1M2

White

254 x 254

254 x 336 x 867

970824

PMADM1M2BLK

Black

254 x 254

254 x 336 x 867

Part No.

Install your satdome, camera or other marine electronics above your radar with a Seaview Dual Mount. This ensures maximum performance out of your electronics and eliminates radar interference. • Radar located on platform forward of the base plate. • Radar height will be 98mm high. • Oval Hollow mast section allows for easy cable management. • Includes a self-draining water proof cable seal base plate. • Bottom mount is pre-drilled for most closed dome radars. • Top plate required to mout camera, satdome, starlink, searchlight etc. • Light Bar compatible. • Welded aluminium contruction with a choice of white or black powder coated finish. NOTE: ** Top plate is not included with the unit and is sold separately ** *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

ELEVATE YOUR ELECTRONICS

Model

Colour

Base Plate (mm)

Dimensions WxHxD (mm)

970825

PMADM2M2

White

254 x 254

254 x 603 x 1225

970826

PMADM2M2BLK

Black

254 x 254

254 x 603 x 1225

Part No.

Install your satdome, camera or other marine electronics above your radar using a Seaview Dual Mounts. This ensures maximum performance out of your electronics and eliminates radar interference. • Oval hollow mast section allows for easy cable management. • Includes a self-draining water proof cable seal base plate. • Bottom mount is pre-drilled for up to 1.37m. Open array radars. • Top plate required to mount camera, satdome, Starlink, searchlight etc. • Light Bar compatible. • Welded aluminium contruction with a choice of white or black powder coated finish. NOTE: ** Top plate is not included with the unit and is sold separately ** *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

ELEVATE YOUR ELECTRONICS

19" Modular Radar Dual Mount Tower Part No.

Model

Colour

Base Plate (mm)

Dimensions WxHxD (mm)

970829

PMADM4M1

White

254 x 254

299 x 483 x 762

Lighting & Electrical

Modular Radar Dual Mount Tower - 603mm High

Install your satdome, camera or other marine electronics above your radar with a Seaview Dual Mount. This ensures maximum performance out of your electronics and eliminates radar interference. • Radar centered over base plate. • Radar height will be 171mm. • Round hollow mast section allows for easy cable management. • includes a self-draining water proof cable seal base plate. • Bottom mount is pre-drilled for most closed dome radars. • Top plate required to mout camera, satdome, Starlink, searchlight etc. • Light Bar compatible. • Welded aluminium contruction with a white powder coated finish. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

ELEVATE YOUR ELECTRONICS

www.samallen.com.au

330

Top Plates Modular Top Plate - Searchlights Model

Colour

Overall Dimensions L x W x D (mm)

970700

ADABLANK

White

346 x 80 x 31

970955

ADABLANKBLK

Black

346 x 80 x 31

Part No.

Seaview Modular Top Plates are designed to be mounted onto your Seaview Modular Mounts. These top plates eliminate the "Swiss cheese" look of your typical radar and satdome mounts, leaving only 4 visible mounting screws to secure your electronics. • This top plate is supplied blank to fit your searchlight or other equipment on a Seaview modular mount. • Manufactured out of marine grade Starboard Polymer and available in white or black. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. * ELEVATE YOUR ELECTRONICS

Modular Top Plates - FLIR M & Raymarine T series Cameras Model

Colour

Overall Dimensions L x W x D (mm)

970703

ADAF1

White

346 x 180 x 31

970704

ADAF1BLK

Black

346 x 180 x 31

970705

ADAF2

White

354 x 197 x 19

970706

ADAF2BLK

Black

354 x 197 x 19

970707

ADAF3

White

349 x 256 x 19

970708

ADAF3BLK

Black

349 x 256 x 19

Part No.

970703

Lighting & Electrical

Seaview Modular Top Plates are designed to be mounted onto your Seaview Modular Mounts. These top plates eliminate the "Swiss cheese" look of your typical radar and satdome mounts, leaving only 4 visible mounting screws to secure your electronics. • These top plates are designed to fit a range of FLIR M or Raymarine T series thermal cameras on Seaview modular mounts. • Manufactured out of marine grade Starboard Polymer. • Different models to fit your camera. • 970703/970704 suits Flir M series and Raymarine T series thermal cameras. • 970705/970706 suits Flir M100 and M200 series thermal cameras. • 970707/970708 suits Flir M300 Series thermal cameras. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

970705

970707

970708

ELEVATE YOUR ELECTRONICS

Modular Top Plate - KVH V30 Satdome

331

ELEVATE YOUR ELECTRONICS

Part No.

Model

Colour

Overall Dimensions W x H x D (mm)

970728

ADAV30

White

308 x 19 x 383

Seaview Modular Top Plates are designed to be mounted onto your Seaview Modular Mounts. These top plates eliminate the "swiss cheese" look of your typical radar and satdome mounts, leaving only 4 visible mounting screws to secure your electronics. • Suits KVH V30, H30. • Pre-drilled white marine grade Starboard polyboard. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

www.samallen.com.au

Top Plates Modular Top Plates - Closed Domed & Open Array Radars Model

Colour

Overall Dimensions W x H x D (mm)

970713

ADAR1

White

305 x 24 x 299

970714

ADAR1BLK

Black

298 x 25 x 296

Part No.

Seaview Modular Top Plates are designed to be mounted onto your Seaview Modular Mounts. These top plates eliminate the "swiss cheese" look of your typical radar mounts, leaving only four visible mounting screws to secure your electronics. These plates are pre-marked to fit most marine electronics, dimpled to match the provided drill templates for easy and precise drilling. • 970713 Manufactured out of 6.4mm thick aluminium plate encased in a Glass Filled ABS Plastic to be 12.5mm overall. • 970714 Manufactured out of 19mm marine-grade starboard polymer. • Fits majority of closed dome and open array radars. • Not Suitable for use with Seaview Modular Dual Mounts. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. * ELEVATE YOUR ELECTRONICS

Modular Top Plate - Dome Radars - Starboard Part No.

Model

Colour

Overall Dimensions W x H x D (mm)

970717

ADAR2

White

283 x 19 x 295

Seaview Modular Top Plates are designed to be mounted onto your Seaview Modular Mounts. • Manufactured out of marine grade Starboard polymer. • Suits 24" JRC, Lowrance 2400 HD, Northstar and Simrad DX64S domes. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

ELEVATE YOUR ELECTRONICS

Model

Colour

Overall Dimensions W x H x D (mm)

970718

ADAS1

White

309 x 11 x 365

970719

ADAS1BLK

Black

309 x 11 x 365

Part No.

Seaview Modular Top Plates are designed to be mounted onto your Seaview Modular Mounts. • Manufactured out of 6.4mm thick Aluminum plate encased in a Glass Filled ABS Plastic to be 12.5mm overall. • Suits KVH M1DX/M1/TV1/LTE1/M2/M3/M3DX/M3ST/V3/V3-IP/TV3, Intellian i2/i3, Raymarine 33STV/37STV, Trane & Thrane Sailor FB500/ Fleet 55+. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

Lighting & Electrical

Modular Top Plates - Satdomes - Mounts Ending in M1

ELEVATE YOUR ELECTRONICS

Modular Top Plates - Satdomes - Mounts Ending in M1 or M2 Part No.

Model

Colour

Overall Dimensions Ø x H (mm)

970721

ADAS2

White

470 x 11

970722

ADAS2BLK

Black

470 x 11

Seaview Modular Top Plates are designed to be mounted onto your Seaview Modular Mounts. • Manufactured out of 6.4mm thick Aluminum plate encased in a Glass Filled ABS Plastic to be 12.5mm overall. • Suits KVH M5/TV5/FB250 (18")/M7/M7SK/HD7/TV6/FB500 (26")/V7/ V3-IP (24"), Intellian i4/i4P/i5/i6/i6P/S6HD/FB500/v45C, Raymarine 45STV/60STV, Sea-Tel (Cobham) ST14/FX150 (16.5")/C18, FX250 (24"). *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

www.samallen.com.au

ELEVATE YOUR ELECTRONICS

332

Light Bars & Accessories Light Bars - Searchlight & FLIR Camera Mounts

Modular Light Bar - Closed Dome Radars

Part No.

Model

Colour

Overall Dimensions W x H x D (mm)

Part No.

Model

Colour

Overall Dimensions W x H x D (mm)

970765

LTB13

White

32 x 359 x 311

970775

LTBR

White

32 x 454 x 454

970766

LTB13BLK

Black

32 x 359 x 311

970776

LTBRBLK

Black

32 x 454 x 454

970945

LTB Saddle Hardware Kit for Light Bar

All Seaview light bars are made from powder coated aluminium tube and are compatible with Seaview Modular mounts. The bars are 32mm in diameter. • Compact lightbar to clear searchlights and thermal cameras up to 356mm tall. • Not suitable for use with the FLIR M300 Series Cameras. • Can fold down over 90° - providing extra height clearance for storage. • Includes stainless steel saddle assembly and hardware for installation. • Light not included. NOTE: LED anchor light to suit 970770, 970771 or other lights can be fitted using the 970768 or 970769 universal light box top - refer page page 335.

970945

ELEVATE YOUR ELECTRONICS

Modular Light Bar - Satdomes

Lighting & Electrical

Model

Colour

970778

LTBS

White

508mm or less

970779

LTBS24

White

610mm

970945

LTB Saddle Hardware Kit for Light Bar

• Suitable for use with 457-610mm closed dome radars. • Can fold down over 90° - providing extra height clearance for storage. • Includes Stainless Steel saddle assembly and hardware for installation. • Light not included. NOTE: LED anchor light to suit 970770, 970771 or other lights can be fitted using the 970768 or 970769 universal light box top - refer page page 335.

970945 ELEVATE YOUR ELECTRONICS

Modular Light Bar - Open Array Radar

Dimensions Suits Satdomes Overall W x H x D (mm)

Part No.

LTB Saddle Hardware Kit for Light Bar

Part No.

Model

Colour

Open Array Radar

Dimensions W x H x D (mm)

32 x 676 x 311

970772

LTBOA

White

1.37m

32 x 575 x 737

32 x 829 x 406

970773

LTBOA6

White

Up to 1.82m

32 x 676 x 1054

These Seaview Light bars are crafted from a brilliant white powder coated, 32mm diameter aluminum tube, and are compatible with Seaview Modular Mounts. • Can fold down over 90° - providing extra height clearance for storage. • Includes Stainless Steel saddle assembly and hardware for installation. • Light not included. NOTE: LED anchor light to suit 970770, 970771 or other lights can be fitted using the 970769 universal light box top - refer page page 335.

All Seaview Light bars are crafted from a brilliant white powder coated 32mm diameter aluminium tube, and are compatible with Seaview Modular Mounts. • Can fold down 90° - providing extra height clearance for storage. • Includes Stainless Steel saddle assembly and hardware for installation. • Light not included. NOTE: LED anchor light to suit 970770, 970771 or other lights can be fitted using the 970769 universal light box top - refer to page 335.

970772

970945

970778

970773

970779

333

ELEVATE YOUR ELECTRONICS

www.samallen.com.au

Light Bars & Accessories Modular Light Bar & Sionyx Camera Mount - Radar Model

Colour

Campatible With

Overall Dimensions W x H x D (mm)

970984

LTBSXN

White

Sionyx Nightwave

125 x 720 x 440

970985

LTBSXNBLK

Black

Sionyx Nightwave

125 x 720 x 440

Part No.

This Seaview Light Bar and Sionyx camera mount is made from powder coated aluminium and compatible with Seaview Modular Mounts. The top light bar is 32mm in diameter. The 51mm diameter bar is designed to support the Sionyx Nightwave camera. It is designed to clear 610mm radar domes or satdomes. • Includes combination masthead/anchor light. • USCG approved for sail or power driven vessels up to 20m in length (3Nm). • CE certified. • Ingress protection of IP67. • Sionyx Nightwave camera is not included.

Not Included

ELEVATE YOUR ELECTRONICS

Part No.

Model

Colour

Compatible With

Dimensions W x H x D (mm)

970782

LTBSF2

White

FLIR M100/M200

193 x 970 x 545

Light bar and thermal camera mount, made from aluminium, powder coated brilliant white and compatible with Seaview Modular Mounts. The top light bar is 32mm in diameter. The 51mm diameter bar is designed to support most thermal cameras. This unit will clear 508mm Satdomes but not 610mm Satdomes. NOTE: LED anchor light to suit 970770, 970771 or other lights can be fitted using the 970769 universal light box top - refer to page 335.

Modular Light Bar &Thermal Camera Mount - Radar Part No.

Dimensions Compatible With Overall W x H x D (mm)

Model

Colour

970784

LTBSF4

White FLIR M100/M200 193 x 678 x 545

970952

LTBSF4BLK

Black

FLIR M100/M200 193 x 678 x 545

Light bar and thermal camera mount, made from aluminium, powder coated and compatible with Seaview Modular Mounts. The top light bar is 32mm in diameter. The 51mm diameter bar is designed to support most thermal cameras. This unit will clear 457 610mm closed dome radars with the exception of Raymarine RD424 & Garmin Fantom 24. NOTE: LED anchor light to suit 970770, 970771 or other lights can be fitted using the 970768, 970769 universal light box top - refer to page 335.

ELEVATE YOUR ELECTRONICS

www.samallen.com.au

Lighting & Electrical

Modular Light Bar & Thermal Camera Mount - Satdome

ELEVATE YOUR ELECTRONICS

334

Light Bars & Accessories Fold Down Light Bar Clamp Kit

Universal Light and GPS Top Mount

Part No.

Model

Compatible With

Part No.

Model

Colour

970767

LTB90

ADAR1, ADAS1 & ADAS2 top plates, when spreader is not used

Overall Dimensions Stud Hidden (mm)

970786

LTBU1A

White

191 x 88 x 77

Bolt on kit that allows you to quickly fold down your Seaview Light Bar without requiring any tools. Great for trailering and dry-stack storage. • Compatible with: Seaview Modular Top Plates with a thickness of 12.5mm where light bar is secured. • Used with an aft raked Seaview Modular mount and compatible Modular Top Plate. • Compatible with the following models of Seaview Light Bars: LTB, LTBR, LTBS, LTBS24, LTB13, & LTBRSS (Sold separately).

Universal Top Mount for Seaview Light Bars, to mount your lights and/or GPS. This unit comes with a removable cap that when inverted has a 1"-14 threaded stud to allow for the installation of an antenna.

Lights and antenna not included.

ELEVATE YOUR ELECTRONICS

Combination Round Light - LED (3Nm) Part No.

Model

Colour

Overall Length Dimensions Volts Wire(m) Ø x H (mm)

970770

LTBLED12C5

White

51 x 90

Black

51 x 90

970771 LTBLED12C5BLK

Lighting & Electrical

Seaview LED Combination Masthead / All Round White Light. • Easy Installed to the top of any Seaview light bar. • USCG approved for sail or power driven vessels up to 20 meters in length (3 Nautical Mile). • Available in either white or black. • C5 Certified. • Ingress protection of IP67. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion.*

Light Bar Adapter Mount - Light & Antennas Part No.

Model

Colour

Dimensions W x H x D (mm)

970947

PMU2ALED12C5

White

421 x 446 x 190

Light bar top with a C5 certified combination masthead / all round white LED light on a 305mm post and two 1"-14 threaded bases for antennas. Wires all run internally.

ELEVATE YOUR ELECTRONICS

Light Bar Top - 1"-14 Threaded

Universal Light Box Top Part No.

Model

Colour

Overall Dimensions W x H x D (mm)

970768

LTBBOX

Black

133 x 174 x 92

970769

LTBBOXW

White

133 x 174 x 92

Part No.

Model

Colour

Diameter (mm)

Height (mm)

970785

LTBU

White

Plastic Adapter to mount an antenna to any Seaview Light Bar. • Standard 1"-14 thread.

• Universal Box Top provides a place to mount all-round, masthead or stern lights. • Easy Installed to the top of any Seaview light bar. • Box Top Only - (Lights are not included). • Available in either Black or White.

ELEVATE YOUR ELECTRONICS

335

ELEVATE YOUR ELECTRONICS

www.samallen.com.au

Light Posts Combination Round Light - LED (3Nm) - Post Mount Part No.

Model

Colour

Base Ø (mm)

Height (mm)

970928

SVLTP12LEDC5

White

305

970930

SVLTP24LEDC5

White

610

Seaview's light posts come in various height options to clear any obstructions as needed. These powder coated aluminium light posts are 32mm in diameter with a 70mm round base plate. • Commonly fitted to a modular light bar using the 970786 (LTBU1A) universal top mount or the 970769 (LTBBUXW). • USCG approved for sail or power driven vessels up to 20 meters in length (3 Nautical Miles). • IP67 ingress protection rating. • C5 Certified.

Mounted to the 970786 (LTBU1A) universal top mount (not included).

ELEVATE YOUR ELECTRONICS

Spreader Kits Modular Base Mount - Spreader Kit - Antenna Mount Part No.

A (mm)

B (mm)

C (mm)

Model

Colour

970996

SP1MODV2

White

1074

330

133°

970998

SP1MODBLKV2

Black

1074

330

133°

Lighting & Electrical

This three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that whatever is mounted on there it will not interfere with the radar or Satdome on the base mount. All the wiring from your GPS or radio antenna can be routed internally through the spreaders and into the mount itself. All components in the spreader kit are bolted together with rubber gaskets to prevent any water intrusion. Each spreader kit includes two S/S 1"-14 threaded adapters. • Fits all Seaview mounts that end in M1. • No additional accessories are required.

ELEVATE YOUR ELECTRONICS

Spreader Kit Insert - Stainless Steel - 1"-14 Threaded Part No.

Model

Colour

Diameter (mm)

Height (mm)

970906

SP7SS

Stainless Steel

Stainless steel 1"-14 threaded insert for Seaview Spreader Kits. This insert replaces the plastic threaded insert that was supplied with earlier model with Seaview Spreader Kits. • Recommended for 1.2m and taller fibreglass antennas.

ELEVATE YOUR ELECTRONICS

www.samallen.com.au

336

Thermal Camera Mounts Thermal Camera Pedestal - Vertical Mount - Flir

970792 with FLIR (Not Included)

970793 with FLIR (Not Included)

970794 with FLIR (Not Included)

970795 with FLIR (Not Included)

Model

Colour

Base Ø (mm)

Height (mm)

970792

PM5FM38

White

203

146

970793

PM5FMD8

White

203

143

970794

PM5FMH8

White

203

146

970795

PM5FMT8

White

203

143

For Select Models

FLIR M300C, M332, M364, M364C & M364CLR FLIR MD324 & MD625 FLIR M132, M232 (Hiko) M324, M625, M612L, M617CS & M618CS

Get the most out of your thermal camera with a Seaview vertical mount. This mount will raise your camera over 125mm clearing anything that will obstruct the view, while taking up very little space with its 203mm diameter base plate. • Welded aluminium construction with white powder coated finish. • Four pre drilled holes allows for a simple and easy installation. • No visible bolts on the camera mounting plate providing extra security and an improved aesthetic. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion.*

Lighting & Electrical

ELEVATE YOUR ELECTRONICS

Camera Pedestal - Vertical Mount - Sionyx Nightwave

970799

Nightwave (Sold Separately) Mounted Perspective

337

Part No.

970800

Part No.

Model

Colour

Base Ø (mm)

Height (mm)

970799

PM5SXN8

White

203

143

970800

PM5SXN8BLK

Black

203

143

Get the most out of your Sionyx Nightwave, Low Light Night Camera with this Vertical Mount from Seaview. This mount will raise your camera ~ 140mm clearing anything that would obstruct it's view. The 203mm base takes up minimal space. With four pre-drilled holes installation is kept simple and easy, with no visible bolts on the camera mounting plate. • Welded aluminium construction available in either white or black powder coated finish. • Pre-drilled holes. • No visible bolts. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion.*

Self-draining waterproof cable seal base plate

ELEVATE YOUR ELECTRONICS

www.samallen.com.au

Low Profile Adapters & Accessories Satdome Mount Adaptors - Low Profile Part No.

Model

Base Overall Colour Plate Ø Dimensions (mm) Ø x H (mm)

970732 AMA16 White

203

359 x 70

970733 AMA18 White

203

359 x 85

970736 AMA24 White

203

478 x 87

For Select Models

KVH M2/M3/M3DX/M3ST/V3/V3-IP/TV3/ V3HTS/V30, Intellian i3, Ray 37STV KVH M5/TV5/FB250 (18"), Intellian i4/i4P/ i5/v45C, Ray 45STV, SeaTel ST14/ FX150 (16.5")/ C18/FX250 (24") KVH M7/M7SK/HD7/TV6/V7/FB500 (26"), F55, Intellian i6/i6P/ S6HD/FB500, Ray 60STV

970733

970732

970736

Seaview Low Profile Adaptors are ideal for Satdome installations where space is limited due to their small mounting bases. All models feature a centre channel to run cables through. • Pressed from 3mm aluminium sheet and encased in white, glass filled ABS on visible surfaces. • 203mm round base plate. • Compatible with 970738 concentric wedge. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

970732 with KVH M3 (Not Included)

ELEVATE YOUR ELECTRONICS

Concentric Wedge - 203mm Ø Base Part No.

Model

Colour

Base Plate Ø (mm)

Height (mm)

970738

AMAW

White

203

28 - 49

This Concentric Wedge is perfect for use with a Seaview Low Profile Satdome Mount Adaptor to achieve the angle to optimise performance. By rotating this wedge's two halves you can achieve any angle between 0° - 12° of adjustment. • Injection moulded plastic. • Compatible with all Seaview Mounts with 203mm round Base. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion.*

ELEVATE YOUR ELECTRONICS

Radar Mount Wedges - Direct - 4° Part No.

Model

Colour

Material

Angle of Wedge

Overall Dimensions W x D (mm)

Wedge Thickness H (1-2) (mm)

For Select Models

970865

RW41

White

Marine Grade King Starboard Poly board

4°

210 x 235

24-8

970866

RW42

White

Injection Molded ASA Plastic

4°

279 x 317

36-13

970867

RW42BLK

Black

Injection Molded ASA Plastic

4°

279 x 317

36-13

970868

RW43

White

4°

254 x 255

14-6

970871

RW46

White

Marine Grade King Starboard Poly board Marine Grade King Starboard Poly board

Wide Furuno DRS4DL (15"-20" radar), 18" Koden & 18" Sitex 18-24" Raymarine, 18-24" Garmin, 3G & 4G Simrad, Lowrance/ B&G, HB2124 Humminbird, 25" Koden/ Sitex 18-24" Raymarine, 18-24" Garmin, 3G & 4G Simrad, Lowrance/ B&G, HB2124 Humminbird, 25" Koden/ Sitex Open array Furuno, Garmin, Koden, Sitex and Simrad RB series

4°

292 x 303

38-17

Furuno 610mm, JRC 381mm

Lighting & Electrical

Direct Radar Mount Wedges

Improve your radar's performance with a Seaview Direct Mount Angled Wedge. This wedge angles the radar 4 degrees below the horizontal, and mounts directly underneath the radar. • Pre-drilled to fit your specific radar, allowing for quick and easy, hassle free installation. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. * 970868

970865

970866

970871 970867 ELEVATE YOUR ELECTRONICS

www.samallen.com.au

338

Mast Platforms & Accessories Radar Bracket - Mast Mount - 457mm Raymarine & Garmin Part No.

Model

Colour

Mast Width

Overall Dimensions W x H x D (mm)

For Select Models

970879

SM18R

White

67mm or larger

286 x 189 x 504

Raymarine, Garmin and B&G (3G, 4G, BR24) Radars

Seaview Mast Mounts are designed to have the radar as close as possible to the mast. Featuring Ultra Heavy Duty mounting feet and rivets to secure onto the mast. • Designed with forward and aft adjustable rails to position the radar as close as possible to the mast. • A solid under body construction improves the mount's strength and durability. It can also hide the radar cables from the environment. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

ELEVATE YOUR ELECTRONICS

Radar Bracket - Mast Mount - 457mm Furuno Part No.

Model

Colour

Mast Width

Overall Dimensions W x H x D (mm)

For Select Models

970880

SM18U

White

67mm or larger

305 x 189 x 398

Furuno, Sitex, Lowrance, Simrad & Koden Radar

Lighting & Electrical

ELEVATE YOUR ELECTRONICS

Radar Bracket Guard - Mast Mount - Stainless Steel Part No.

Model

970885

SMG18U

970886

SMG24U

Colour

For Radars

mm Stainless Steel Most 406-508 Radars Most 610 mm Stainless Steel Radars

Works with

970879 970880 SM24U SM24R

Protect your radome from damage and reduce wear and tear on the sails with a Seaview Mast Mount Guard. Manufactured from marine grade 316 Stainless Steel and finished with a high polish. No extra fastenings required, mounted using the radome bolts. Fits easily between the mast mount and radar antenna. • 970885 Not Suitable with the Raymarine Quantum 2 & Simrad HALO24. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

339

ELEVATE YOUR ELECTRONICS

www.samallen.com.au

Starlink Accessories Modular Top Plate - Starlink Standard Gen 2 Part No.

Model

Colour

Dimensions W x H x D (mm)

970725

ADASTLK

White

346 x 106 x 179

Seaview Modular Top Plate designed to be mounted on Seaview Modular Mounts ending in M1 or M2. This plate facilites the attachment of a Starlink Standard Gen 2 antenna. • 316G stainless steel Starlink adapter with a 1"-14 threaded fixed base on 6.4mm white powder coated aluminium plate. • Top of the adapter is machined to fit the Starlink Gen 2 antenna post. • Seaview Light Bar compatible. ELEVATE YOUR ELECTRONICS

Mount Adaptor Plate - Starlink Standard Gen 2 - 610mm Satdome Part No.

Model

Colour

Dimensions W x H x D (mm)

970926

SVK24STLK

White

381 x 106 x 381

ELEVATE YOUR ELECTRONICS

Mounting Bases and Adaptor - Starlink Standard Gen 2 Part No.

Overall Dimensions Base Ø x H (mm)

Mounting Screw Holes (mm)

S/S

41 x 92

1"-14 Threaded

S/S

70 x 112

Model

Colour

970919

SV114STLK

970920

SV114STLKFB

Part No.

Model

970921

SV114STLKRB

Lighting & Electrical

Starlink Standard Gen 2 adapter plate for KVH or Intellian satdomes. • Suits KVH or Intellian 610mm or larger satdomes with a 305 x 305mm bolt hole pattern. • 316G stainless steel Starlink adapter with a 1"-14 threaded fixed base on 6.4mm aluminum plate • The aluminum plate is powder coated white and fits inside an empty KVH or Intellian satdome.

Dimensions Overall Height Mounting Colour Base W x D (mm) (mm) Screws (mm)

S/S

64 x 91

191

6 c/s

The Starlink Gen 2 Standard actuated antenna uses Seaview's 316G S/S adaptor to mount to a 1" - 14TPI post. Adaptors are available with either a fixed base or fold down base with a 1"-14TPI post to mount your Starlink Gen 2 antenna. • Bottom of the adaptor has a 1" - 14TPI internal thread and comes with a locking nut. • Top of the adaptor is machined to fit the Starlink antenna post. • Your Starlink cable can pass through the entire adaptor and exit out the centre of the fixed base or the cable can exit just before the adapter if preferred**. NOTE: ** If running the Starlink cable externally we recommend using a Seaview cable seal to provide waterproof entry.

970919 970921

970920

ELEVATE YOUR ELECTRONICS

www.samallen.com.au

340

Starlink Accessories Modular Top Plate - Starlink Standard Gen3

ELEVATE YOUR ELECTRONICS

Part No.

Model

Dimensions Colour Starlink Angle Overall W x H x D (mm)

970956

ADAG3

White

1.3°

411 x 76 x 650

970959

ADAG3BLK

Black

1.3°

411 x 76 x 650

The Seaview modular top plate for the Starlink Standard Gen3 Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff. The aluminium plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined, marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance. The Starlink Standard Gen3 Antenna now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, mounting to a vehicle or vessel necessitates additional support. • Includes a Seaview Horizontal cable seal for waterproof cable entry. (This can be placed either beneath the antenna or externally depending on application.) • Unit does not come with Starlink Antenna. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

Angled Wedge Mount - Starlink Standard Gen 3 Part No.

Model

Colour

Wedge Angle

Dimensions W x H x D (mm)

970909

SRM200WB8

White

8°

411 x 197 x 644

Lighting & Electrical

This Seaview mount for the Gen 3 Standard Starlink Antenna is perfect for providing additional support to your Starlink Antenna when underway. Specifically engineered and designed for the rigorous demands of a harsh marine environment, it is not only perfect for your boat, but also for other outdoor applications, such as RVs. An aluminium base plate with a 3 part polyurethane prime and power coat, and end pieces which are made using a machined, marine-grade high-density polyethylene ensure the best possible finish and corrosion resistance. The 8° wedge plate with pre-drilled mounting holes for easy fastening is drilled and tapped for the Seaview Standard Vertical Cable seal, ensuring a watertight and secure installation without the need to cut your Starlink connectors. NOTE: Unit does not come with Starlink Antenna. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. * ELEVATE YOUR ELECTRONICS

Direct Surface Mount - Starlink Standard Gen 3 Part No.

970953

ELEVATE YOUR ELECTRONICS

341

Model

Dimensions Colour Starlink Angle Overall W x H x D (mm)

APXG3DMV2 White

1.3°

470 x 76 x 649

This direct surface mount is perfectly tailored for the Standard Gen 3 Starlink antenna, specifically engineered for the demands of a harsh marine environment. It is suitable not only for your vessel but for any other outdoor use, such as on RV's. The design also incorporates a slight angle (1.3°) to the Starlink antenna to facilitate moisture runoff. The end caps of the 970953 are crafted from machined, marine grade high-density polyethylene, offering exceptional finish and corrosion resistance. These end caps are secured to a black hardanodised aluminium strip, providing superior strength to firmly hold the Gen 3 antenna on any flat surface. • Includes a Seaview Horizontal cable seal for waterproof cable entry. (This can be placed either beneath the antenna or externally depending on application.) • Compatible with 970954 removable base kit. • Unit does not come with Starlink Antenna. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

www.samallen.com.au

Starlink Accessories Modular Top Plate - Starlink Mini Dimensions Colour Starlink Angle Overall W x H x D (mm)

Part No.

Model

970957

ADAMINI

White

2.8°

276 x 71 x 367

970986

ADAMINIBLK

Black

2.8°

276 x 71 x 367

ELEVATE YOUR ELECTRONICS

The Seaview modular top plate for the Starlink Mini Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff. The aluminium plate has a 3 part polyurethane prime and powder coat. The end pieces are made using machined, marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance. The Starlink Mini Antenna now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or vessel, it necessitates additional support. • Includes a Seaview Horizontal cable seal for waterproof cable entry. (This can be placed either beneath the antenna or externally depending on application.) • Unit does not come with Starlink Antenna. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

Direct Surface Mount - Starlink Mini Part No.

Model

Colour

970949

APXMDM

White

Dimensions Starlink Angle Overall W x H x D (mm)

2.8°

ELEVATE YOUR ELECTRONICS

350 x 73 x 334

Lighting & Electrical

This direct surface mount kit is designed specifically for the Starlink Mini Antenna, engineered to withstand the harshest marine environments. While it's tailored for marine use, its robust design makes it ideal for a variety of outdoor applications, including RVs. The mount's design includes a slight angle to the Starlink antenna, promoting moisture runoff and ensuring optimal performance. The end caps of the 970949 are crafted from machined, marine grade high-density polyethylene, offering exceptional finish and corrosion resistance. These end caps are secured to a black hardanodised aluminum strips, providing superior strength to firmly hold the antenna on any flat surface. • Includes a Seaview Horizontal cable seal for waterproof cable entry. (This can be placed either beneath the antenna or externally depending on application.) • Compatible with 970950 removable base kit. • Unit does not come with Starlink Antenna. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

Removable Base Kits Part No.

Model

970954

APXG3DMRBV2

970950

APXMDMRB

Suits

ELEVATE YOUR ELECTRONICS

Gen 3 970953 (APXG3DMV2) Mini 970949 (APXMDM)

These optional removable base kits can be used to easily remove your Starlink antenna when needed. The black anodised 10mm thick aluminium strips simply mount to your desired mounting surface and are pre-drilled and tapped so that your respective Seaview surface mount can mount directly on top. The removable base kit is a great option if you plan to use your Starlink Standard Gen3 or Mini antenna in more than one location. NOTE: The installation instructions for these units is at the end of their respective "to suit parts installation instructions". *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

www.samallen.com.au

970950

970954

342

Starlink Accessories Modular Top Plate Kit - Starlink Flat HP - Light Bar Part No.

Model

Colour

Wedge Angle

970942

SVSLWBLEDC5

White

8°

970943

SVSLWBBLKLEDC5

Black

8°

Modular Base Plate

Angled Wedge

Light Bar

970715 (ADAR1MLB) 970716 (ADAR1MLTBBLK)

970940 (SVSLWB) 970941 (SVSLWBBLK)

970775 (LTBR) 970776 (LTBRBLK)

Overall Dimensions W x H x D (mm)

338 x 526 x 779 338 x 526 x 779

This Seaview wedge base kit caters to installations with restricted space, where additional height isn't required, yet an LED navigation light remains essential. Includes all the Seaview parts necessary to install the Starlink Flat High Performance antenna on the 8° wedge base, along with the 3NM LED combination masthead all-round light. The LED light is IP67 watertight with 2.1m of wire (12v) and USCG approved for boats up to 20 meters in length. • Specifically designed for the marine environment (3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). • Direct replacement for the gray wedge base that may come with the Starlink Flat HP antenna. • Suits Seaview modular base mounts ending in M2. • Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. • Drilled and tapped for the cable seal included with each Seaview wedge base. • No need to cut the Starlink connectors for installation. • Available in white or black. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

970942

970943

ELEVATE YOUR ELECTRONICS

Lighting & Electrical

Angled Wedge Base - Starlink Flat HP

ELEVATE YOUR ELECTRONICS

343

Dimensions Wedge Angle Overall(mm)

Part No.

Model

Colour

970940

SVSLWB

White

8°

338 x 108 x 426

970941

SVSLWBBLK

Black

8°

338 x 108 x 426

Specifically engineered and designed for the rigorous demands of a harsh marine environment with a 3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance. It is not only ideal for your boat, but also for other outdoor applications, such as RVs. • Designed to fit the Starlink Flat High-Performance Antenna • Pre-drilled mounting holes allow your antenna to fasten directly to your wedge. • Drilled and tapped for your Seaview standard vertical cable seal (one seal included with each Seaview wedge base.). • No need to cut your Starlink connectors for installation. • Use Seaview modular top plate 970726 (ADASTLKA) to mount angled wedge to modular base mounts ending in M1. NOTE: Angled wedge does not come with antenna. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

www.samallen.com.au

Starlink Accessories Modular Top Plate - M1 Mounts - Starlink Flat HP Model

Colour

Overall Dimensions (mm)

970726

ADASTLKA

White

264 x 19 x 235

970727

ADASTLKABLK

Black

264 x 19 x 235

Part No.

Seaview Modular Top Plate designed to be mounted onto a Seaview Modular Mount. This plate is ideal to mount just your Starlink Flat High-Performance Antenna to your vessel with a Seaview Modular Single Mount, leaving only four visible mounting screws. • Suits Seaview Modular Mounts ending in M1. • Not Suitable to mount on a Seaview Modular Dual Mount. • Can be used with the 970940 (SVSLWB) angled wedge. • No Light Bar connection. • Manufactured from marine grade Starboard Polymer. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

970726

970727

ELEVATE YOUR ELECTRONICS

Modular Top Plate - M2 Mounts - Starlink Flat HP Part No.

Model

Colour

Overall Dimensions W x H x D (mm)

970715

ADAR1DMLTB

White

296 x 25 x 353

970716

ADAR1DMLTBBLK

Black

296 x 25 x 353

970715

Lighting & Electrical

Seaview Modular Top Plate designed to be mounted onto a Seaview Modular Mount. This plate is ideal to mount just your Starlink Flat High-Performance Antenna to your vessel with a Seaview Modular Single Mount, leaving only four visible mounting screws. • Suits Seaview Modular Mounts ending in M2. • Light Bar compatible. • Manufactured from marine grade Starboard Polymer. • Available in either White or Black. *Installation NOTE: We recommend the use of a marine corrosion inhibitor such as Tef-Gel during installation to prevent galling and dissimilar metal corrosion. *

970716

ELEVATE YOUR ELECTRONICS

www.samallen.com.au

344

Cable Seals Cable Seals Part No.

970742

970746

970749

970753

970743

970747

970750

970754

Lighting & Electrical

ELEVATE YOUR ELECTRONICS

970745

970748

970752

970755

Model

Colour & Material

970742

CG20PB

Black Plastic

13.5

970743

CG20PG

Grey Plastic

13.5

970745

CG20PW

White Plastic

13.5

970746

CG20SB

Black Powder Coated Stainless Steel

13.5

970747

CG20SS

Polished Stainless Steel

13.5

970748

CG20SW

White Powder Coated Stainless Steel

13.5

970749

CG30PB

Black Plastic

27.5

970750

CG30PG

Grey Plastic

27.5

970752

CG30PW

White Plastic

27.5

970753

CG30SB

Black Powder Coated Stainless Steel

27.5

970754

CG30SS

Polished Stainless Steel

27.5

970755

CG30SW

White Powder Coated Stainless Steel

27.5

The Seaview Cable seals provide your marine electronics with a waterproof cable routing. They are made from a choice very strong UV-resistant plastic or 316G Stainless Steel in various colour options. Seaview Cable Seals fit a wide range of cables and connectors, ranging from 20mm to 34mm connector diameter, making them ideal for almost any installation. Tapered rubber seals and a base gasket provide a watertight installation. • IPX6 & IPX7 Tested and Approved. • Choice of a strong UV resistant plastic or a marine grade 316 Stainless Steel housing. • Available in various colours and finishes. • All Seaview cable seals can be used with more than one cable at a time.** • Drill tubes are included with each individually packaged cable seal, coming in 4 sizes (6, 8, 10 & 12mm). They are used to drill clean and easy holes when compared to using a drill bit, allowing you to choose where your cables will pass through the seal and not have to be supplied with large amounts of rubbers for different applications. ** NOTE: You can use multiple cables for any Seaview Cable seal as long as each cable has its own hole and each hole has 3mm of rubber around each hole.

Retro Fit Cable Seals

970744

970751

Max. Outside Connector Max. Height Ø Ø Ø C (mm) Cable A (mm) B (mm) D (mm)

Part No.

Model

Colour & Material

970744

CG20PG2

Grey Plastic (Retro Fit)

13.5

970751

CG30PG2

Grey Plastic (Retro Fit)

27.5

The Retrofit Cable Seal allows you to provide your already installed cables with a waterproof pass-through without the need to rerun your cable, utilizing a split seal design. Available for cables up to 13.5 or 27.5mm. • IPX6 & IPX7 Tested and Approved. • Strong UV resistant plastic housing. • All Seaview cable seals will can be used with more then one cable at a time.** • Drill tubes are included with each individually packaged cable seal, coming in 4 sizes (6, 8, 10 & 12mm). The are used to drill clean and easy holes when compared to using a drill bit. Allowing for your to chose where your cables will pass through the seal and not have to be supplied with large amounts of rubbers for different applications. ** NOTE: You can use multiple cables for any Seaview Cable seal as long as each cable has its own hole and each hole has 3mm of rubber around each hole.

ELEVATE YOUR ELECTRONICS

345

Max. Max. Outside Height Cable Ø Ø A (mm) Connector Ø B (mm) C (mm) D (mm)

www.samallen.com.au

Cable Seals Multi-Cable Seals Part No.

Model

Colour & Material

Cable Ø (mm)

Length A (mm)

Width B (mm)

Height C (mm)

Max Connector Max Cable Ø D Ø (mm) (mm)

Cut Out ExF (mm)

970756

CGM17PB

Black Plastic

Up to 10.6

102

73 x 19

970757

CGM17PG

Grey Plastic

Up to 10.6

102

73 x 19

970758

CGM17PW

White Plastic

Up to 10.6

102

73 x 19

970759

CGM17SB

Black Powder Coated Stainless Steel

Up to 10.6

102

73 x 19

970760

CGM17SS

Polished Stainless Steel

Up to 10.6

102

73 x 19

CGM17SW

White Powder Coated Stainless Steel

Up to 10.6

102

73 x 19

970761

The Seaview Cable Seal Designed for Multiple Cables is perfect to provide waterproof routing for numerous cables. While all Seaview Cables Seals are able to run multiple cables, the extra surface area of the seals allows for easier layout of multiple cables running through. • IPX6 & IPX7 Tested & Approved. • Choice of housing either marine grade 316 stainless steel or very strong UV resistant plastic available in various colours. • Drill tubes are included with each individually packaged cable seal, coming in 4 sizes (6, 8, 10 & 12mm). They are used to drill clean and easy holes when compared to using a drill bit, allowing you to choose where your cables will pass through the seal and not have to be supplied with large amounts of rubbers for different applications. ** NOTE: You can use multiple cables for any Seaview Cable seal as long as each cable has its own hole and each hole has 3mm of rubber around each hole.

970756

970757

970758

970759

ELEVATE YOUR ELECTRONICS

970760

Part No.

Model

Colour & Material

Cable Ø (mm)

Overall Dimensions L x W x H (mm)

970740

GP2090

Black Plastic

Up to 13.5

65 x 44 x 36

970741

GP2090W

White Plastic

Up to 13.5

65 x 44 x 36

The Seaview Horizontal Cable Seals (90-degree cable seal) are streamline, waterproof seal with a horizontal orientation. Tapered rubber seals and a base gasket provide for a watertight installation. • Can comfortably fit a connector with a diameter of up to 9.5mm, with a maximum up to 12.7mm depending on the type and length of the connector. • Captive Nut in the base to make it easy to assemble. • IPX6 & IPX8 Tested and Approved. • Drill tubes are included with each individually packaged cable seal, coming in 4 sizes (6, 8, 10 & 12mm). They are used to drill clean and easy holes compared to a drill bit. Allowing you to choose where your cables will pass through the seal and not have to be supplied with large amounts of rubbers for different applications. • All Seaview cable seals can be used with more than one cable at a time.** ** NOTE: You can use multiple cables for any Seaview Cable seal as long as each cable has its own hole and each hole has 3mm of rubber around each hole.

970740

970741

ELEVATE YOUR ELECTRONICS

Lighting & Electrical

Horizontal 90° Cable Seals

Horizontal 90° Dual Cable Seals Part No.

Model

Colour & Material

Cable Ø (mm)

Overall Dimensions L x W x H (mm)

970740D

CGM90

Black Plastic

Up to 6.3

61 x 53 x 26

970741D

CGM90W

White Plastic

Up to 6.3

61 x 53 x 26

The Seaview Horizontal Dual Cable Seals (90-degree cable seal) are streamline, waterproof seal for two cables in a horizontal orientation. Tapered rubber seals and a base gasket provide for a watertight installation. Can comfortably fit a connector with a diameter of up to 7.9mm. with a maximum up to 9.5mm depending on the type and length of the connector. • Captive Nut in the base to make it easy to assemble. • IPX6 & IPX8 Tested and Approved. • Drill tubes are included with each individually packaged cable seal, coming in 4 sizes (6, 8, 10 & 12mm). They are used to drill clean and easy holes compared to a drill bit. Allowing you to choose where your cables will pass through the seal and not have to be supplied with large amounts of rubbers for different applications. • All Seaview cable seals can be used with more than one cable at a time.** ** NOTE: You can use multiple cables for any Seaview Cable seal as long as each cable has its own hole and each hole has 3mm of rubber around each hole.

www.samallen.com.au

970740D

970741D

ELEVATE YOUR ELECTRONICS

346

Sail, Deck & Rail Pods Sail Pods - Vertical Pedestal Mount - Small & Med MFD - Uncut Part No.

Model

Colour

Overall Dimensions W x H x D (mm)

Min. Clamp Spacing (mm)

Max. Clamp Spacing (mm)

Max. Usable Face (mm)

Max. Cut Out Area (mm)

970896

SP2S

White

313 x 192 x 129

304

298 x 178

279 x 156

970899

SP3S

White

362 x 241 x 131

349

349 x 228

329 x 206

The Seaview Sail Pod also known as SPOD, is an instrument pod for sailboats and catamarans. Expanding on their modular mounts, Seaview developed these sail pods with a similar concept, with numerous box sizes to fit almost any chart plotter or instrument in the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. The SPOD has been designed with each back to have a continuous radius that matches up with the stainless steel pod clamps, the result being a precise viewing angle which can be decided by the customer at time of installation. The SPOD fits the majority of steering pedestals from Jefa, Whitlock and Edson. • Wide mounting angle, allowing for precise viewing. Angle set during installation. • Two highly polished stainless steel clamps to secure the SPOD onto boat rails of either 25mm, 28mm or 32mm OD. • Water tight gasket is used to prevent water from entering inside the pod, while GORE-TEX ventilation vent lets hot air escape without letting water in. *Please note that the Pods are not pre-cut to fit specific equipment.

970896 / 970899

DELETED

970899 with Lowrance (Not Included)

ELEVATE YOUR ELECTRONICS

Lighting & Electrical

SailPod-VerticalPedestalMount-LargeMFD-Uncut

Sail Pod - Vertical Pedestal Mount -Single - Uncut

Part No.

Model

Usable Face Size (mm)

Max. Cut Out Area (mm)

Dimensions W x H x D (mm)

Part No.

Model

Usable Face Size (mm)

Max. Cut Out Area (mm)

Dimensions W x H x D (mm)

970901

SP4S

430 x 311

406 x 286

445 x 324 x 145

970892

SP1S2

127 x 127

111 x 111

137 x 137 x 86

The Seaview Sail Pod, also known as SPOD is a instrument pod for sailboats and catamarans. Expanding on their modular mounts concept, Seaview has developed a sailboat pod design with a similar concept. There are different box sizes available to fit almost any chart plotter or instrument on the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle adjustment during installation. Please note that Pods are not pre-cut to fit your specific equipment. • Clamps suit rails of either 25mm, 28mm or 32mm OD.

970892 with B&G (Not Included)

DELETED

347

ELEVATE YOUR ELECTRONICS ELEVATE YOUR ELECTRONICS

www.samallen.com.au

Sail, Deck & Rail Pods SailPod-HorizontalPedestalMount-SmallMFD-Uncut

SailPod-HorizontalPedestalMount-MedMFD-Uncut

Part No.

Face Size Max. Cut Out Model Usable (mm) Area (mm)

Dimensions W x H x D (mm)

Part No.

Face Size Max. Cut Out Model Usable (mm) Area (mm)

Dimensions W x H x D (mm)

970897

SP2S1

313 x 192 x 129

970900

SP3S1

361 x 241 x 131

298 x 178

279 x 156

970897 with Raymarine (Not Included)

349 x 229

329 x 206

970900 with Lowrance (Not Included)

970897 Rear View

DELETED ELEVATE YOUR ELECTRONICS

ELEVATE YOUR ELECTRONICS

Part No.

Model

Colour

Overall Dimensions W x H x D (mm)

Min. Clamp Spacing (mm)

Max. Clamp Spacing (mm)

Max. Usable Face (mm)

Max. Cut Out Area (mm)

Style

970903

SP5S

White

392 x 144 x 102

106

381

374 x 127

352 x 105

970904

SP5S1

White

392 x 144 x 102

106

381

374 x 127

352 x 105

Pedestal Vertical Mount Pedestal Horizontal Mount

The Seaview Sail Pod also known as SPOD, is an instrument pod for sailboats and catamarans. Expanding on their modular mounts Seaview developed these sail pods with a similar concept, with numerous box sizes to fit almost any chart plotter or instrument in the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. The SPOD has been designed with each back having a continuous radius that matches up with the stainless steel pod clamps, the result being a precise viewing angle that can be decided by the customer at the time of installation. • Fits the majority of steering pedestals from Jefa, Whitlock and Edson. • Compatible with three instruments that are 125 x 125mm or smaller each. • Wide mounting angle, allowing for precise viewing. Angle set during installation. • Two high polished stainless steel clamps are used to secure the SPOD onto vertical pedestal rails of either 25mm, 28mm or 32mm OD. A single clamp is used to secure the pod onto the horizontal section of the pedestal rail. • Water tight gasket is used to prevent water from entering inside the pod, while GORE-TEX ventilation vent lets hot air escape without letting water in. *Please note that the Pods are not pre-cut to fit specific equipment.

Lighting & Electrical

Sail Pod - Horizontal Pedestal Mount - Triple - Uncut

970903 Clamps

970904 970903 with Garmin (Not Included) ELEVATE YOUR ELECTRONICS

www.samallen.com.au

348

Sail, Deck & Rail Pods Sail Pod - Rotating Base - Small MFD - Uncut

Sail Pod - Rotating Base - Med MFD - Uncut

Part No.

Face Size Max. Cut Out Model Usable (mm) Area (mm)

Dimensions W x H x D (mm)

Part No.

Face Size Max. Cut Out Model Usable (mm) Area (mm)

Dimensions W x H x D (mm)

970895

SP2P

313 x 192 x 129

970898

SP3P

361 x 241 x 131

298 x 178

279 x 156

349 x 229

329 x 206

DELETED

970895 with Raymarine (Not Included)

ELEVATE YOUR ELECTRONICS

970898 with Garmin (Not Included)

Lighting & Electrical

Sail Pod - Rotating Base - Triple - Uncut Part No.

Model

Usable Face Size (mm)

970902

SP5P

375 x 127

Max. Cut Out Area (mm)

Dimensions W x H x D (mm)

352 x 105

387 x 140 x 81

The Seaview Sail Pod, also known as SPOD is a instrument pod for sailboats and catamarans. Expanding on their modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are different box sizes to fit almost any chart plotter or instrument on the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. Seaview has designed these SPODS with a high quality, anodised, machined aluminium post base which rotates through 300° and can be locked in position through fine increments. The instrument within the pod is easily removed from the base for safe storage. Please note that Pods are not pre-cut to fit your specific equipment. • Quick lock and release rotating base with single grub screw retainer. • Wide viewing angle set in fine increments with single screw lock. • Compatible with 3 Instruments that are 125mm x 125mm or less each.

970902 with Garmin (Not Included) ELEVATE YOUR ELECTRONICS

349

www.samallen.com.au

Sail, Deck & Rail Pods Sail Pod - Single Instrument Add-On - Uncut Part No.

Model

Overall Dimensions Max. Usable Face Max. Cut Out W x H x D (mm) (mm) Area (mm)

970887

SP1BOX

128 x 131 x 79

117 x 117

105 x 105

N/A

970888

SP1BOX2

137 x 137 x 86

127 x 127

111 x 111

NMEA 90° Plug

Included

This Seaview Accessory Pod can be mounted to any Seaview Sail Pods providing the flexibility to mount additional instruments. Made from high quality marine grade UV resistant ABS plastic and held together with tamper resistant security screws. A water tight gasket prevents water from intruding into the pod. • Includes Hardware to install on pod box. *Please note that the Pods are not pre-cut to fit specific equipment.

970887 with Raymarine (Not Included)

970887 Rear View

970888 with B&G (Not Included)

ELEVATE YOUR ELECTRONICS

Antenna Rail Clamp Part No.

Model

Colour

Threads

970933

SVRCL1

S/S

1"-14

The Seaview 316G cast stainless steel Rail Mount is designed to fit 25mm, 28mm and 32mm OD rails and used for mounting GPS, or radio antennas. Supplied with three different rubber bushings to suit the various rail sizes. The unique two-piece design clamps to a rail and keeps wiring completely hidden inside the mount and railing. The 1"-14 thread accepts most common GPS or radio antennas.

ELEVATE YOUR ELECTRONICS

Vault Drain Plug

Lighting & Electrical

Antenna Rail Clamp - Stainless Steel

Vault Drain Plug Part No.

Model

Colour

Diameter Ø (mm)

Depth (mm)

970910

SV101V

Black

The Vault series drain plug is engineered to screw into an existing 1/2" NPT brass or stainless steel transom drain. • Ergonomic triangular cap making it easy to tighten with no tools required. • NPT backup O-ring for a water tight fit. • Approved for all marine environments including salt water. • It floats if accidently dropped into the water. • The unit is manufactured from a glass fibre reinforced ABS plastic to increase strength and flexibility.

ELEVATE YOUR ELECTRONICS

www.samallen.com.au

350

LED Exterior & Interior Lights Flood/Awning Lights

LED - Flood/Awning Lights - Mako Series GEN

LED UV

Bugger-Off - White/Amber LED's

MULTI-VOLTS

IP67

RESISTANT

Part No.

Frame Colour

Lumens Angle (lm)

Volts Watts Current Draw Dimensions (V) (W) (A) L x W x H (mm)

709346

Black White/Amber

1600

45°

9-32

1.2

231 x 55 x 46

709350

Black White/Amber

2560

45°

9-32

1.8

312 x 55 x 46

Part No.

Frame Colour

LED Colour

Lumens Angle (lm)

Volts Watts Current Draw Dimensions (V) (W) (A) L x W x H (mm)

709348 White

White/Red

1600

9-32

LED Colour

Marine - White/Red LED's

45°

1.2

231 x 55 x 46

• Powder coated die-cast aluminium housing. • Low current draw: 709346/709348 - 1.2A at 12V 709350 - 1.8A at 12V • Pre-wired with 450mm cable tail. • Remote switched, requires 3 way switch (Not included). • 45° flood type beam. • Dual Colour: 709348/709350 - White/Amber to help deter insects 709346 - White/Red to help with night vision • Over voltage and overheating protection. • Foam gasket. • IP67 ingress rated. • Can be mounted vertical or ceiling mounted. • Stainless steel M6 x 25mm hex socket with Nyloc nuts included. • ROHS and CE certified.

Flood Perfect for illuminating large areas with broad lighting cover

Lighting & Electrical Die-cast aluminium design help keep the light cool when in use

709346 & 709348 231

709348 - White & Red modes to help retain night vision

45° 185

Same depth for all models

709350

312 48

351

45°

265 709346/709350 - White & Amber modes to help deter insects

www.samallen.com.au

Awning Lights LED - Awning Lights - Alloy Part No.

LED Colour

Frame Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions L x W x D (mm)

70966

Cool White

White

400

0.36

243 x 43 x 30

70966G

Cool White

Grey

400

0.36

243 x 43 x 30

70966BLK

Cool White

Black

400

0.36

243 x 43 x 30

70967

Cool White

White

1000

0.9

582 x 43 x 30

SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

IP66

UV RESISTANT

45° angle provides better light distribution

• Ideal for use in many marine, automotive, caravan, motorhome, camper trailer and domestic applications, also suitable for rocket launcher, under gunwale and targa top bar lighting. • LED Chip Sets: Small Awning Light: 12 x LG chip LED's Large Awning Light: 30 x LG chip LED's • Protection Rating: IP66. • 45° housing angle. • Aluminium frame with powder coating. • No switch. DELETED

70966

70966G

70966BLK

Lighting & Electrical

70967

LED - Porch Light - Plastic - Switched Part No.

LED Colour

Frame Colour

70973

Cool White

White

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions L x W x D (mm)

192

0.16

1.92

173 x 110 x 56

SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

IP66

UV RESISTANT

• Ideal for use in all interior or exterior marine, caravan, motorhome and camper trailer applications. • 12 x super bright LEDs. • Protection Rating: IP66. • Waterproof on/off switch. • Tinned wires.

www.samallen.com.au

352

Ceiling Lights LED - Interior Light - Rectangular - Switched SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

Part No.

LED Colour

Frame Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions L x W x D (mm)

70963

Cool White

White

576

0.48

5.76

185 x 110 x 24

70964

Cool White

Grey

576

0.48

5.76

185 x 110 x 24

• Ideal for use in all interior marine, caravan, motorhome and camper trailer applications. Most commonly used for cockpit lighting or galley lighting. • 36 x super bright 5630 SMD LEDs with a light output comparable to a 30 watt halogen. • Surface mounting with a on/off switch. • Tinned wires. 70963

70964

LED - Ceiling Light - Touch/Dimmable Switch SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

GEN

IP44

DIMMABLE

LED

TOUCH

UV RESISTANT

SENSOR

709770/709772

Lighting & Electrical

709769/709775

Blue

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions L x W x D (mm)

White/Blue

Black

400

0.6

165 x 165 x 16

White/Blue

White

400

0.6

165 x 165 x 16

709771

White/Blue

Chrome

400

0.6

165 x 165 x 16

709772

White/Red

White

400

0.69

165 x 165 x 16

709773

White/Red

Chrome

400

0.69

165 x 165 x 16

709775

White/Red

Black

400

0.69

165 x 165 x 16

LED Colour

709769 709770

709770B

Black Frame

709770W

White Frame

709770C

Chrome Frame

• Ideal for use in all interior or exterior marine, caravan, motorhome and camper trailer applications. • Super bright Next Gen LEDs: 6 Blue/Red LEDs / 96 White LEDs. • 3 Way Touch Sensor Switch with Dimming Feature: First touch - Blue/Red LED Second touch - White LED Third touch - Off. • Ultra long service life: rated to 50,000 hours. • Dimmable - Touch and hold dimming feature to control brightness level for both Red/ Blue and White LED's • Red/Blue LED function is for enhanced night vision. • Aluminium Frame and white polycarbonate bezel. • 600mm wires: tinned for easy installation. • Protection Rating: IP44. • Surface Mount.

709771/709773

Red

Frame Colour

Part No.

White Dimmable Touch Sensor

709770B

353

709770W

709770C

www.samallen.com.au

Clear Lens

Stylish Polycarbonate Bezel

Interior Lights LED - Ceiling Light - Touch - Round LED Colour

LED Qty

Volts (V)

709752 White & Silver

White

12/24

0.25/0.15

130 x 11

709755

White

0.25 (12V)

130 x 11

18/6

12/24

0.25/0.15

130 x 11

Part No.

Frame

White

709753 White & Silver White/Red

Amps 12/24 (A)

• Ideal for RV’s and Caravans. • ABS housing. • Sealed ESD protected LED's • Touch switching. • 709752: Touch on bright. Touch dim. Only 11mm Touch off. thick • 709753: Touch on red. Touch on white. Touch off. • 709755: Touch on. Touch off. • Surface mount. White LED's • Protection Rating: IP66. • LED lifespan of 50,000 hours. • 130mm tinned wires. • 709752 / 709753 include 1x silver and 1x white trim for choice of finish.

Watts (W)

Dimensions Ø x D (mm)

MULTI-VOLT

TOUCH

12V - 24V

SENSOR

IP66

709755

Touch on/off

709753 Red LED's

709752/709753

Silver trim included on 709752/709753 only

LED - Down Lights - Round LED Colour

Frame Colour

Lumens (lm)

Volts (V)

Amps Watts Diameter (A) (W) Ø x D (mm)

70940

Cool White

White

192

0.16

1.92

83 x 12

70941

Cool White

Chrome

192

0.16

1.92

83 x 12

70944

Cool White

Silver

192

0.16

1.92

83 x 12

70931

Cool White

Silver

192

0.16

3.84

83 x 12

Chrome

192

0.16

1.92

83 x 12

Touch

70945

Cool White

70937S

Brass Replacement Frame

70940W

White Surround Only to suit 70940

70941C

Chrome Replacement Frame

70944S

Silver Replacement Frame

Switch

DC 12V / 24V MULTI-VOLTS

70931/70944

SUITABLE FOR

DC 12V / 24V 12V MULTI-VOLTS

IP66

24V

70940 TOUCH

SENSOR

• Ideal use in all interior and exterior marine, caravan, motorhome and camper trailer applications. • Surface mount. • Tinned wires. • Protection Rating: IP66. • Dimmable switch compatible. • 70945: Touch sensor with a chrome surround. Touch on touch off. Not dimmable.

70941

70945

Lighting & Electrical

SUITABLE FOR

Part No.

Only 12mm thick

Removing the bezel reveals the mounting holes for installation.

www.samallen.com.au

354

Interior Lights LED - Ceiling Light - Touch - Rectangle SUITABLE FOR

TOUCH

12V/24V

SENSOR

IP66

Part No.

LED Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

70989

White

216

12/24

0.26

3.12

LED Qty L xDimensions W x D (mm)

220 x 100 x 13

• Ideal for use in all interior marine, caravan, motorhome and camper trailer applications. • Polycarbonate lens. • 60 Powerful SMD LED's. • Decorative bezel to hide the mounting fixtures. • Surface mount. • Protection Rating: IP66. • Touch on/dim/off switch. • Memory function recalls last setting when centrally switched.

Touch sensor

LED - Strip Lamp - Switched DC 12V / 24V MULTI-VOLTS

12V

GEN

SUITABLE FOR

LED

Soft push on/off

LED Colour

709768

White

Lumens LED Qty Volts (lm) (V)

270

Amps Watts (A) (W)

0.45

Dimensions L x W D (mm)

5.4 320 x 40 x 15.3

Pack Qty

• Ideal for use in all interior marine, caravan, motorhome and camper trailer applications. • ABS plastic cover. • Surface mount. • Push button on/off. • Easy to install. • Protection Rating: IP66.

DC 12V / 24V MULTI-VOLTS

12V

GEN

Lighting & Electrical

LED - Ceiling Light - Slimline - Switched SUITABLE FOR

LED

Push on/off

355

Part No.

LED Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions L x W x D (mm)

70981

Cool White

504

0.48

5.8

368 x 45 x 10.4

• Ideal for use in all interior marine, caravan, motorhome and camper trailer applications. • Sealed polycarbonate LED housing. • 72 x bright 2835SND chip LEDs. • White gloss powder coated finish aluminium housing. • Slimline attractive design. • Tinned wires. • Low profile switch.

www.samallen.com.au

Interior Lights LED - Interior Strip Light - Swivel - Switched Part No.

LED Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions L x W x D (mm)

70956

Cool White

384

0.32

3.84

467 x 33 x 35

0.16 @ 12V 0.50 @ 12V

225 x 33 x 35

470 x 33 x 35

709608

Cool White

200

10-30

709609

Cool White

600

10-30

MULTI-VOLTS

DELETED

• Ideal use in all interior marine, caravan, motorhome and camper trailer applications. Most commonly used for cockpit lighting or galley lighting. • Protrudes out 35mm. • Super bright LEDs: 70956 - 24 x 5630 SMD LED's 709608 - 10 x SMD LED's. 709609 - 30 x SMD LED's. • Aluminium Housing with a swivel rail that rotates 180°. • Tinned Wires. • Mini rocker On / Off switch.

709608 Packaging

70956 / 709609

LED - Interior Strip Light - Slim - Swivel - Switched LED Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions L x W x D (mm)

70970

Cool White

288

0.24

2.88

347 x 25 x 20

SUITABLE FOR

12V

DC 12V / 24V MULTI-VOLTS

• Ideal for use in all interior marine, caravan, motorhome and camper trailer applications. Most commonly used as an under gunwale, cockpit, cabin or galley lighting. • 18 Super bright 5630 SMD LEDs. • Light output comparable with an 8 watt fluro. • Mini rocker On / Off switch. • Rotates 180 degrees. • Tinned wires.

Mini rocker switch

LED - Strip Light - Slimline Volts LED Colour Lumens (lm) LED Qty (V)

Amps (A)

Watts (W)

Dimensions L x W x D (mm)

709764

White

200

0.2

3.4

230 x 24 x 11

709765

Black

200

0.2

3.4

230 x 24 x 11

SUITABLE FOR DC 12V / 24V MULTI-VOLTS

• Ideal for use in all interior marine, caravan, motorhome and camper trailer applications. • ABS plastic cover. • Surface mount. • Easy to install. • Protection Rating: IP66. • No switch.

12V

GEN

Part No.

IP66

LED

709764

Lighting & Electrical

Part No.

Only 11mm thick 709765

LED -Alloy Strip Light - Low Profile LED Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions L x W x D (mm)

709675

Natural White

120

0.14

1.8

360 x 15 x 6

• Ideal for under cabinets or storage areas for lighting. • Surface mounting extends out 6mm. • Cables can be fed through the side or back of the housing. • Tinned wires. • Stainless steel mounting brackets. • No switch.

SUITABLE FOR DC 12V / 24V MULTI-VOLTS

Slide mounting brackets

www.samallen.com.au

Side wire harness

12V

GEN

Part No.

LED

Back wire harness

356

Reading Lights LED - Bullet Reading Light - Dimmable - USB Charger NEXT

GEN

MULTI-VOLTS

DIMMABLE

LED

TOUCH

RoHS

SENSOR

Part No.

CO M P L IA N T

Night Light

117mm

90˚ 350˚ 20mm

Dia.65mm

Colour

USB Dimensions Lumens Volts Watts Outlet (lm) (V) (W) (V/A) H x � (mm)

LED Colour

709906 Chrome Warm White

650 10-30

5/2

117 x 65

709907

650 10-30

5/2

117 x 65

Black

Warm White

• Ideal for interior RV, camper trailer, caravan, freshwater yachts and boats, book light, map light and laptop light. • Touch switch. • Mode: First touch: Activates the blue night light. Second touch: Activates the reading light, night light remains on. Third touch: Switches both lights off. • Hold your finger on the touch button to dim the reading light. (Remembers dimmed setting after being turned off) • 350° of swivel and 90° of vertical tilt. • USB-A charging port 5V 2A output. • 120mm tinned wire with pre-crimped copper connections. • Mounting hardware included. • Can be mounted onto a flat surface. • ROHS / CE certified.

LED - Blade Reading Light - Dimmable - USB Charger NEXT

GEN

MULTI-VOLTS

DIMMABLE

LED

TOUCH

RoHS

SENSOR

Part No. Colour

CO M P L IA N T

Night Light

Lighting & Electrical

130mm 90˚

DELETED

15mm 39.5mm

350˚

70.5mm

LED Colour

USB Lumens Volts Watts Outlet (lm) (V) (W) (V/A)

709900 Chrome Warm White 650 10-30

5/2 70.5 x 39.5 x 130

709901 Black

5/2 70.5 x 39.5 x 130

Warm White 650 10-30

LED - Bulkhead Reading Light - Dimmable - USB Charger NEXT

GEN

MULTI-VOLTS

DIMMABLE

LED

TOUCH

RoHS

SENSOR

Part No.

CO M P L IA N T

Colour

LED Colour

709910 Chrome Warm White

Night Light 88mm

Dia.61mm 105mm

90˚

350˚

20mm

USB Lumens Volts Watts Outlet (lm) (V) (W) (V/A)

300 10-30

5/2

Dimensions H x � (mm)

105 x 65

Dia.65mm

357

Dimensions L x W x H(mm)

www.samallen.com.au

Reading & Door Handle Lights LED - Map/Reading Lights LED Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Length (mm)

70972

Cool White

192

0.16

1.92

460

SUITABLE FOR

12V

DC 12V / 24V MULTI-VOLTS

GEN

Part No.

LED

• Ideal for use in all smaller interior marine, caravan, motorhome and camper trailer applications. Most commonly used for bed head lighting in camper trailers. • 12 x super bright 5630 SMD LEDs. • Flexi neck enabling it to be put in almost any position required. • Horizontal and vertical mounting. • Mini rocker On/Off switch.

12 Super Bright LEDs

Mini rocker switch

LED - Flexible Map/Reading Light - with USB Lumens (lm)

Volts (V)

Amps @ 12V

Watts (W)

Length (mm)

709912 White/Red

Black

300

10-30

0.25

470

• It is ideal for reading charts or bedside lighting in cabins and all types of RV's. • Aluminium body with black powder coat finish. • Red LED light preserves night vision for after-dark use. • Convenient three-way touch sensor allows easy switching between white light, red light, and off. • Dimmable white LED function - simply touch and hold the on/off button to control brightness. • Includes a memory function that retains the last brightness setting. • Equipped with a 5V/2A USB A charger for added convenience. • Powered by Bridgelux LEDs. • 125mm tinned wire.

SUITABLE FOR

12V/24V

GEN

LED

RoHS

CO M P L I A NT

Touch on/off

Lighting & Electrical

Colour

LED Colour

Part No.

3 2

1 Mounting Guide Off

White mode

Red mode

USB charger

LED - RV Door Handle - Switched Part No.

Housing Colour

LED Colour

Volts (V)

Amps

Watts (W)

Dimensions W x H x D (mm)

709776 709777

White

Cool White

0.02

0.24

150 x 236 x 48

Black

Cool White

0.02

0.24

150 x 236 x 48

12V

QUALITY BUILT

IP67

5mm

Lights up top and bottom

203mm

• 12 LED's with 50,000 hours life span. • Low profile recessed mount. • Easy to install. • UV resistant fibreglass reinforced polycarbonate body. • Waterproof push button switch. • Illuminates top and bottom. • Water tight silicone rubber gasket. • Stainless steel mounting screws and plastic screw caps included. • Protection Rating: IP67.

SUITABLE FOR DC 12V / 24V MULTI-VOLTS

118mm

Waterproof toggle switch On/Off

www.samallen.com.au

358

Door Handle & Strip Lights LED - Hand Rail Light

LED - Strip Lights - Flexible

LED Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions L x W x D (mm)

Blue

0.15

1.5

330 x 46 x 68

Part No.

709779 White

0.15

1.5

330 x 46 x 68

Part No.

709778

• Ideal for internal use in all boats, caravan, motorhome and camper trailer applications. • Opaque window with 3 SMD LED chips. • Illuminates stairs and doorways. • Chrome plated face panel. • Die-cast alloy body. • Protection Rating: IP66.

Bright 3528 Strips LEDs Per Metre

Volts (V)

Amps Watts Length Width (A) (W) (M) (mm)

709882 Warm White

0.4

4.8

709884 Warm White

1.3

15.6

709886

Red

0.4

4.8

709888

Cool White

0.4

4.8

709890

Cool White

1.3

15.6

709892

Blue

0.4

4.8

709894

Blue

1.3

15.6

LED Colour

SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

Super Bright 5050 Strips

QUALITY BUILT

LED Colour

LEDs Per Metre

Volts (V)

Amps Watts Length Width (A) (W) (M) (mm)

709895

Red

3.4

40.8

709896

Blue

3.4

40.8

709897

Cool White

3.4

40.8

Part No.

Strip Light Accessories

709879 End Caps to suit 5050 Strip Lights 709881 Connector to suit LED Strip Lights 709898 Plastic Mounting Saddles 709899 End Caps to suit 3528 Strip Lights • Ideal for under gunwales, around baitboards, rocket launchers, bow and stern rails, lockers, cupboards. • Protection Rating: IP68. • 1M Strips: 3 x mounting saddles. 140mm positive/negative wire. • 5M Strips: 10 x mounting saddles. 140mm positive/negative wire.

Lighting & Electrical

LED - Hand Rail - Blue Illumination Part No.

LED Colour

Frame Colour

Volts (V)

Amps (A)

Watts Dimensions (W) L x W x D (mm)

70974

Blue

Clear Tube Chrome Ends

0.52

6.2

709898

507 x 34 x 62

• Ideal for internal use in all boats, caravan, motorhome and camper trailer applications. • Chrome plated die cast zinc alloy end caps. • PVC mounting gaskets. • 1/4" UNC fastening kit included.

1M Strips

709881

SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

709879/709899

QUALITY BUILT

DELETED 5M Strips Handrail LED on

359

www.samallen.com.au

Strip, Bimini Lights & Dimmer Switches LED - Universal Light Strips Part No.

Touch LED Digital Dimmer Switch - S/S - 2 Colours

Volts Amps Watts Dimensions LED Colour Lumens (lm) (V) (A) (W) L x W (mm)

Type

709872 Universal Cool White 950

0.7

8.4 1300 x 50

• Ideal for use in many marine, automotive, caravan,motorhome, camper trailer and domestic applications. • 72 x 5050 SMD chip LED's. • Aluminium hooks and velcro for ease of installation. • 5 metres of lead with cigarette lighter plug. • Protection Rating: IP68. • Includes convenient carry bag. • Simple On/Off switch. SUITABLE FOR

12V

IP68

Switch Function

Volts (V)

Amp Cut-Out Dimensions (A) Ø x D (mm) Ø x D (mm)

530727

On/Off/Dim

12-30

1.5

19 x 20

22 x 20

• Ideal for use in all smaller interior marine, caravan, motor-home applications. • Touch to turn On/Off (Red = Off and Blue = On). • Hold to activate dimming function. • Memory function turns the light back on at the same brightness level as when it was turned off. • 304G stainless steel. • Pre-wired 300mm tinned for easy installation. • Surface mount. • Protection Rating: IP66.

709872

Pre-wired

Off

Universal Light Strips

10% 100% Dimming switch changes hue depending on the brightness setting

300

20 1.5

M19xP1.0

LOAD

LED - Bimini Light Volts (V)

Amps (A)

Watts (W)

Dimensions L x W x D (mm)

70983 Cool White

0.15

104 x 35 x 13

• Ideal for bimini's, bull bars and roll bars. • Curved mounting bracket suits bar between 30 and 60mm • Can be mounted onto a flat surface. • Waterproof button switch on/off in the middle of the panel. • Protection Rating: IP65. • Anti rattle rubber mounting bracket. • Pre-wired with 300mm wire. • 304G stainless steel cover.

LED - Digital Dimmer Switch Part No.

Switch Function

Volts Max. Watts Cut-Out Dimensions (V) (W) H x W x D (mm)H x W x D (mm)

709858 On/Off/Dim 10-24

100

67 x 37 x 31 97 x 59 x 39

• Ideal for use in all smaller interior marine, caravan, motorhome applications. • 10-24V DC dimmer can handle up to 100 watts. • UL, CSA, & FCC compliant. • LED backlit night light on power button until turned on. • Separate power switch allows for maintaining desired dim level. • Works with LED and halogen fixtures. • Styling, size & depth designed for RV applications. • Pre-wired with 165mm of tinned wire with a 10A fuse for easy installation. • Dimming range 20% to 100%. • Finish options include black and nickel bezels. • Simple 3 wire installation.

Lighting & Electrical

Part No. LED Colour Lumens (lm)

Curved mounting bracket to suit bimini bar Suits pole diameters from 30 upto 60mm

Back

85mm

Scan for instruction sheet

13mm

100mm

DC 12V / 24V MULTI-VOLTS

Part No.

Pre-wired with 10A fuse

www.samallen.com.au

360

LED Marine Lights Underwater Lights

LED - Underwater Transom Light - Surface Mount - Round NEXT

GEN

MULTI-VOLTS

IP68

COMPLIA NT

Frame Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions Ø x H (mm)

709587

Blue

Black

500

9-32V

0.5

90 x 26

709588

RGB*

Black

500

9-32V

0.5

90 x 26

• Sealed watertight construction, ideal for underwater lighting. • Light angle 60° - 90° light output. • 709587 - 6 x 3W Bridgelux LED's / 709588 - 36 x 5050 RGB LED. • Sealed epoxy resin / polycarbonate. • Protection Rating: IP68 (5M). • Wire length - 2m Pre-wired. • Installation hardware included. • Mounting diagram included. • CE Certified and Rohs.

709588

709587

Ideal for:

Jet Ski

LED Colour

Part No.

LED RoHS

Inflatables

Tinnies

Runabouts

Kits Include*: • Underwater Light. • Stainless steel mounting hardware. • Butt splice terminals & fuse.

LED - Underwater Transom Light - Surface Mount - JB20W & B20W SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

GEN

IP68

LED RoHS

CO MP L I A N T

Lighting & Electrical

Part No.

LED Colour

Frame Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions L x W x H (mm)

709560

Blue

Black

2700

210 x 80 x 30

709563

RGB*

Black

2000

210 x 80 x 30

• Sealed watertight construction, ideal for underwater lighting and trim tab lighting. • Primary spot output is 60° from mounting surface and diffused lens produces a 120° light output. • 1 x 20W COB LED chip. • Sealed epoxy resin with a PA body and tempered glass lens. • Protection Rating: IP68. • 2m pre-wired cord. • Installation hardware included. • Mounting diagram included. NOTE: Designed for underwater use only, these lights are cooled by water. * To change the RGB settings, rapidly press your on/off switch to change between the 11 preset RGB modes. To reset to the default setting switch the lights off for 3-6 seconds and turn them back on. Refer to instruction manual. 210mm 80mm

Kits Include*: • B series Underwater Light • Stainless steel mounting hardware. • Rubber washers • Fuse holder • Butt splice terminals * Amounts in the kit will change depending on the B series Underwater Light.

Scan for in use Video

Ideal for:

Jet Ski

361

Wire Loom Ø8 183mm

Inflatables

Tinnies

Runabouts

Large Boats

www.samallen.com.au

Ø5

Underwater Lights LED - Underwater Transom Light - Surface Mount - JB40W Frame Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

709565

Blue

Black

3000

290 x 110 x 30

709568

RGB*

Black

2400

290 x 110 x 30

SUITABLE FOR

Dimensions L x W x H (mm)

DC 12V / 24V MULTI-VOLTS

12V

GEN

LED Colour

Part No.

IP68

LED RoHS

CO M P LI A NT

• Sealed watertight construction, ideal for underwater lighting and trim tab lighting. • Primary spot output is 60° from mounting surface and diffused lens produces a 120° light output. • 2 x 20W COB LED chip. • Sealed epoxy resin with a PA body and tempered glass lens. • Protection Rating: IP68. • 2m pre-wired cord. • Installation hardware included. • Mounting diagram included. NOTE: Designed for underwater use only, these lights are cooled by water. * To change the RGB settings, rapidly press your on/off switch to change between the 11 preset RGB modes. To reset to the default setting switch the lights off for 3-6 seconds and turn them back on. Refer to instruction manual.

Wire Loom Ø8

55mm

110mm

290mm

Ø5 249mm Tinnies

Runabouts

Large Boats

Frame Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions L x W x H (mm)

709570

Blue

Bronze

6000

9-32

210 x 80 x 15

709573

RGB*

Bronze

4800

9-32

210 x 80 x 15

GEN

LED Colour

Part No.

MULTI-VOLTS

IP68

LED RoHS

CO M P LI A NT

80mm

NOTE: Designed for underwater use only, these lights are cooled by water. * To change the RGB settings, rapidly press your on/off switch to change between the 11 preset RGB modes. To reset to the default setting switch the lights off for 3-6 seconds and turn them back on. Refer to instruction manual. 210mm

Wire Loom Ø8

Ø5

Scan for inuse Video

Lighting & Electrical

LED - Underwater Transom Light - Surface Mount - JB60W

183mm Runabouts

www.samallen.com.au

Large Boats

362

Underwater Lights Light LED Underwater Dock Light - RGB - M6W NEXT

GEN

MULTI-VOLTS

IP68

LED RoHS

COMPLIA NT

709580

709582

SAW Part No.

Description

LED Colour

Frame Lumens Colour (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions Ø x H (mm)

709580

3 Dock Light Kit

RGB*

Black

500

9-32V

0.5

95 x 35

709582

Single Light with 5M Cable

RGB*

Black

500

9-32V

0.5

95 x 35

709584

Light LED underwater AquaIDEA Dock light T-Joiner for cable

709585

Light LED underwater AquaIDEA Dock light replacement 5m cable

709586

Light LED underwater AquaIDEA Dock light replacement 20m cable

709580 Kits Include: • 3 x B6W Dock Lights. • 2 x T-Joiners. • 2 x 5m cable. • 1 x 20m cable. • 6 x Mounting Screws. • Instruction Manual.

• Sealed watertight construction ideal for underwater dock lighting. • LED colours: Wifi RGB. • LED type: 36 x 5050 RGB LED. • Power: 6W 12V AC/DC. • Sealed epoxy resin / polycarbonate. • Protection Rating: IP68 (5M). • Wire length - 5m pre-wired. • Magnetic mounting plate allows easy removal for cleaning. • Installation hardware and mounting diagram included. • CE Certified and Rohs. NOTE: Designed for underwater use only, these lights are cooled by water. * To change the RGB settings, rapidly press your on/off switch to change between the 11 preset RGB modes. To reset to the default setting switch the lights off for 3-6 seconds and turn them back on. Refer to instruction manual.

LED - Underwater Light - Surface Mount SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

GEN

IP68

LED

Part No.

LED Colour

Lumens (lm)

LED Qty

Volts (V)

Amps (A)

Watts (W)

Dimensions L x W x D (mm)

709614

Blue

150

0.9

10.8

150 x 47 x 18

Lighting & Electrical

• Sealed watertight construction, ideal for underwater lighting and trim tab lighting. • Primary spot output is 60° from mounting surface and diffused lens produces a 90° light output. • Sealed in a polycarbonate housing. • Protection Rating: IP68. • 316G stainless steel frame. NOTE: Recommended for trailer boats, not recommended for permanently moored vessels Designed for underwater use only, these lights are cooled by water.

LED's are completely sealed in polycarbonate housing

316G stainless steel frame Next Gen ultra bright LED's

LED - Underwater Trailer Boat Light - Surface Mount SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

GEN

IP68

LED

LED Part No. Colour

709626

Blue

Lumens LED Qty (lm)

300

Volts (V)

Amps Watts (A) (W)

Dimensions L x W x D (mm)

10-30

0.9

170 x 50 x 21

• Sealed watertight construction, ideal for underwater lighting and trim tab lighting. • Primary spot output is 60° from mounting surface and diffused lens DELETED produces a 90° light output. • Sealed in a polycarbonate housing. • Protection Rating: IP68. • 316G stainless steel frame. NOTE: Recommended for trailer boats, not recommended for permanently moored vessels Designed for underwater use only, these lights are cooled by water.

363

www.samallen.com.au

Underwater Lights LED Stainless Steel - Underwater Light - Blue LED Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions Ø x D (mm)

709604

Blue

140

DC 12-28

0.8 - 12V

80 x 25

SUITABLE FOR DC 12V / 24V MULTI-VOLTS

DELETED

12V

GEN

Part No.

LED

IP68

• Ultra bright 3 LED light beam. • This compact light can be used anywhere in water or as deck lighting. • LED sealed in aluminium with a cast 316G stainless steel frame with multiple seals designed for the harsh marine environment. • Low power consumption. • Low temperature. • Protection Rating: IP68. • Surface mounting.

LED - Bung Light - Small LED Colour

Lumens (lm)

Volts (V)

CutAmps Watts Mount Bung Dimensions (A) (W) Holes Ø Out (mm) H x W x D (mm)

709590

White

500

0.3

85.5 x 54 x 42

709592

Blue

500

0.3

85.5 x 54 x 42

GEN

Part No.

MULTI-VOLTS

• Designed specifically to retrofit into the 20mm bung location. • No drilling, use the existing holes. • COB (chip on board) technology. • 2m of tinned wire. • Protection Rating: IP68. • Stainless steel mounting hardware included. • ROHS and CE certified. NOTE: Designed for underwater use only, these lights are cooled by water.

IP68

LED RoHS

CO M P LI A NT

709590 709592

85.5 24.2 Ø5

Ideal for:

Power cable runs through existing hole providing no drilling

40 54

Blue bung light Jet Ski

Inflatables

Tinnies

White bung light

Runabouts

LED - Bung Light - Large CutMount Bung Dimensions Out Holes Ø (mm) H x W x D (mm)

LED Colour

Lumens (lm)

Volts (V)

Amps Watts (A) (W)

709596

Green

500

0.3

100 x 67 x 30

709598

Blue

500

0.3

100 x 67 x 30

GEN

Part No.

MULTI-VOLTS

• Designed specifically to retrofit into the 40mm bung location. • No drilling, use the existing holes. • COB (chip on board) technology. • 2m of tinned wire. • Protection Rating: IP68. • Stainless steel mounting hardware included. • ROHS and CE certified. NOTE: Designed for underwater use only, these lights are cooled by water.

IP68

LED RoHS

CO MP LIANT

Lighting & Electrical

Designed to retrofit 20mm bung using existing holes

709596 709598

100 Ø5

Designed to retrofit 40mm bung using existing holes Ideal for:

Power cable runs through existing hole providing no drilling

38.6 38.7 67

Blue bung light Jet Ski

Inflatables

Tinnies

Runabouts

www.samallen.com.au

Green bung light

364

Docking & Courtesy Lights LED - Docking Light - Surface Mount SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

GEN

LED

IP67

Part No.

LED Colour

Front Lumens

Side Lumens

Volts (V)

Amps (A)

Watts (W)

Dimensions L x W x D (mm)

709622

Cool White

170

330

3.2

90 x 68 x 24

• Stylish tear drop design. • 8 x 5050 LEDs on the side and 2 x high power LED's at the front. • High strength polycarbonate sealed housing. • 304G stainless steel polished cover. • Protection Rating: IP67. NOTE: Sold in pairs.

High power front LED's

5050 side LED's

LED - Courtesy Light - Round - Low Profile SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

IP66

Part No.

LED Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions Ø x D (mm)

709664

Cool White

0.1

1.2

38 x 6.5

709666

Blue

0.1

1.2

38 x 6.5

• Bright and durable surface mount illumination suitable for a variety of indoor or outdoor applications. • 1 x Taiwanese 3535 LED sealed in epoxy. • Polycarbonate optical lens. • 304G stainless steel cover. • Tinned wire. • Protection Rating: IP66. NOTE: Sold in pairs.

DC 12V / 24V MULTI-VOLTS

12V

GEN

Lighting & Electrical

LED - Courtesy Light - Step SUITABLE FOR

IP68

LED

LED Colour

Lumens (lm)

709688

Blue

100

709692

Cool White

100

Part No.

Volts (V)

Amps (A)

Watts (W)

Dimensions L x W (mm)

0.15

1.8

79 x 22.5

0.15

1.8

79 x 22.5

• Bright and durable surface mount suitable for a variety of indoor and outdoor applications. • 3 x Taiwanese 3535 LED chips comparable to a 10 watt halogen. • LEDs are sealed in polycarbonate. • 304G stainless steel frame. • Protection Rating: IP68. • Rated at 50000 hours. • Suitable for underwater use.

LED - Livewell Light SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

GEN

IP68

LED

Volts (V)

Part No.

LED Colour

53980

White

53984

Blue

Amps (A)

Watts (W)

Cut Out Ø (mm)

0.04

0.4

21.5

38 x 32

150

0.04

0.4

21.5

38 x 32

150

• Waterproof design. • Ideal for livewells or bait tanks. • Protection Rating: IP68. • Easy installation.

365

www.samallen.com.au

Dimensions Wire Length Ø x D (mm) (mm)

Work & Flood Lights

Mako Series LED Deck Floodlights LED - Deck Floodlight - Flush or Bracket Mount Description

Housing Colour

Lumens (lm)

LED Colour

Beam

White

900

White

Flood

709340

LED Deck Floodlight

709342

5m LED Floodlight Wiring Harness (Sold Separately)

Volts (V)

Amps (A)

Watts Recess Cut Out Dimensions (W) L x H (mm) L x H x D (mm)

9 - 32

0.83

120 x 48

150 x 58 x 39

MULTI-VOLTS

IP68

UV RESISTANT

GEN

Part No.

RoHS

LED

CO M P L I A N T

• Ideal for cockpits, foredeck and working areas on recreational or commercial vessels. • Aluminium housing coated in durable UV polyester powder coating. • 4 next gen CREE XB-D 3W LED's. • Universal mounting, can be mounted flush or with a bracket. • Protection rating: IP68. • Operation temperatures: -40°C~ +85°C. • Stainless steel mounting hardware included. • CE and RoHS certifications. 39mm

709340 58mm

150mm

Ø4

Ø6

134mm

62mm

39mm

58mm

150mm

Ø4

709342

Ø6

134mm

62mm

LED - Flood Light - Bracket Mount Housing Colour

Lumens (lm)

LED Colour

Beam

Volts (V)

Amps (A)

Watts (W)

Light Overall Dimensions Dimensions H x W x D (mm) H x W x D (mm)

709150

LED Work Light

White

3200

White

Flood

9 - 36

2.8

76 x 82 x 84 100 x 82 x 84

709151

LED Work Light

Black

3200

White

Flood

9 - 36

2.8

76 x 82 x 84 100 x 82 x 84

MULTI-VOLTS

IP68

RoHS

CO M P L I A N T

UV RESISTANT

GEN

LED

• Ideal for cockpits, foredeck and working areas on recreational or commercial vessels. • Aluminium housing coated in durable UV polyester powder coating. • 4 high powered next gen CREE 10W LED's. • Universal mounting angles with over 100° of movements once mounted. • Ingress Protection Rating: IP68 & IP69k. • Operation temperatures: -40°C~ +60°C. • Stainless steel bracket and mounting hardware included. • CE and RoHS certifications.

Lighting & Electrical

Description

Part No.

709150

Easy single bolt

Large heat sink

709151

84mm

76mm

100mm

82mm

Military patented breather

Over 100° of movement allows the work light to be mounted in mul�ple ways in almost any loca�on, making it extremely versa�le.

Includes 5m Harness

www.samallen.com.au

366

Mako Series LED Light Bars LED - Light Bars - Curved - Spot Lights Part No.

Housing No. of Lumens Colour LEDs (lm)

Description

Watts (W)

LED Colour

Beam

Shape

Volts @Current 13.2V* (V) (A)

Dimensions L x D x H (mm)

20" Light Bars

709162

20" White LED Curved Light Bar White

11200

200

White Combination Curved 9 - 36

7.3

613 x 88.5 x 109

709163

20" Black LED Curved Light Bar

11200

200

White Combination Curved 9 - 36

7.3

613 x 88.5 x 109

Black

30" Light Bars

709164

30" White LED Curved Light Bar

White

16800

300

White Combination Curved 9 - 36

11.6

867.3 x 88.5 x 109

709165

30" Black LED Curved Light Bar

Black

16800

300

White Combination Curved 9 - 36

11.6

867.3 x 88.5 x 109

40" Light Bars

709166

40" White LED Curved Light Bar White

22400

400

White Combination Curved 9 - 36

14.3

1065.3 x 88.5 x 109

709167

40" Black LED Curved Light Bar

22400

400

White Combination Curved 9 - 36

14.3

1065.3 x 88.5 x 109

GEN

MULTI-VOLTS

LED

IP68

IP69K

RoHS

CO M P L IA N T

Black

• Ideal for a wide variety of applications including marine, off road, construction, industrial, agricultural, mining and commercial. • Aluminium housing coated in durable UV polyester powder coating. • High-powered next gen CREE LED's rated to 50000 hours. • 360° of rotation up and down once mounted. • Rugged GE Lexan lens, 300 times stronger than glass. • Protection rating: IP68 & IP69K. • Operation temperatures: -40°C~ +62°C. • Stainless steel mounting hardware included. • CE, SAE, RoHS, E-Mark and ISO9001 certifications. • Switch sold separately. NOTE: *Actual current draw will vary depending on system voltage.

UV RESISTANT

Heavy-Duty

Over 100° of movement allows the light bar to be mounted in mul�ple ways in almost any loca�on, making it extremely versa�le.

709162

Lighting & Electrical

709163

709164

709165

709166

709167

367

Pre-wired Deutsch plug

www.samallen.com.au

Mako Series LED Light Bars LED - Light Bars - Curved - Spot Lights

Combination spotlight and floodlight reflectors

Large heat sink for improved temperature control

316G anti-rust & anti-corrosion stainless steel screws

Patented Military Breather - Ideal for all weather conditions

Mako Series LED Light Bar Dimensions SIZE

20"

30"

40"

83.5 mm

88.5mm

65.7mm

109mm

546.6mm

794.6mm

1053.6mm

552.9mm

805.3mm

1059.9mm

613.1mm

867.3mm

1065.3mm

LEDs

Lumens

11200

16800

22400

0.4M cable Switch (not included) wiring layout

Black Red Blue

FUSE

RELAY

5M cable

Eyelets connect to Battery When connecting multiple lights, use appropriate fuse based on system voltage and current draw.

Lighting & Electrical

Scan to see in use video

*Switch and fuse are not included in the kit. Relay is included.

Curved Light Bar, allow for extra space when installing.

C E F G

Kit Includes: • 1 x Mako Series Light Bar • 2 x Mounting Brackets. • 1 x 30A Relay. • 1 x Pre-wired Deutsch Plug (0.4m) • 1 x Wiring Harness (4.2m) • Stainless Steel Mounting hardware *See wiring diagram for cable length.

www.samallen.com.au

368

Spot Lights

Remote Spot Light LED - Spot Light - Deluxe SUITABLE FOR

12V

DC 12V / 24V MULTI-VOLTS

GEN

LED

IP67

UV RESISTANT

Part No.

Lumens Rotation (lm)

Tilt

Volts (V)

701820

6000

355°

50°

5.5

Joystick

210 x 200 x 250

701822

6000

355°

50°

5.5

Joystick

210 x 200 x 250

701830

Joystick Control Panel Only suit 701820 & 701822 LED Search Light

701880

Remote control wireless suit 701820 & 701822 LED Search Light

70187

10.5m Control Cable Extension

DELETED

212

FAST

SLOW

Dimensions L x W x H (mm)

• Ultra bright white uniform beam with low power consumption. • UV stabilised housing with impact and vibration adsorption. • Aluminium housing. • 355° rotation in 13 seconds (Fast mode). • Protection Rating: IP67. • Thermal protection. • Certified in compliance with IEC 60598-2-5:1998 (safety), EN55015 Caution: Not suitable for boats that regularly exceed 15 knots in rough water. Joystick Control Panel: Wireless Remote Control: • Joystick provides smooth • Convenient operation from any effective operation. location on the boat. • Power on and off switch, • No wiring required. 2 Speed switch (horizontal • Water Resistant. rotation). • Powered by a single A23 12V • Modern panel design with battery. composite stylish faceplate. • IP65. • Water Resistant. • 57.8mm x 102.8mm. 701830

252

141.5

200

Amps Watts Weight Controller (A) (W) (kg) Includes

701880

70187

OFF

�152

120

LED - Spot Light SUITABLE FOR

GEN

Lighting & Electrical

12V

DC 12V / 24V MULTI-VOLTS

IP67

LED

Part No. Lumens (lm) Rotation

UV RESISTANT

Tilt

Volts (V)

Amps Watts Weight Controller (A) (W) (kg) Includes

Dimensions L x W x H (mm)

70002

3500

352°

50°

Joystick 218 x 170 x 245

70003

3500

352°

50°

Joystick 218 x 170 x 245

70004

3500

352°

50°

Remote 218 x 170 x 245

70005

3500

352°

50°

Remote 218 x 170 x 245

70006

Joystick Control Panel only suit 70002 & 70003 LED Search light

70008

Remote Control Wireless suit 70002 - 70005 LED Search lights

70009

Globe LED H4 Replacement suit 70002 - 70005 LED Search lights • Ultra bright white uniform beam with low power consumption. • UV stabilised housing with impact and vibration adsorption. • Spot or flood beam pattern. • ABS housing. • 730m of lighting range @ 0.25 Lux2. • Jam protection. • Protection Rating: IP67. • Thermal protection. • Certified in compliance with IEC 60598-2-5:1998 (safety), EN55015. Caution: Not suitable for boats that regularly exceed 15 knots in rough water.

70006

145 66

170 SPOT

OFF

FLOOD

120

145

70008

70009

245

OFF

FLOOD

120

369

218

SPOT

�169

245

�169

218

Joystick Control Panel: • Joystick provides smooth effective operation. • Power on and off switch. • Beam pattern for spot or flood. • Modern panel design with composite stylish faceplate. • Water Resistant.

170

www.samallen.com.au

Wireless Remote Control: • Convenient operation from any location on the boat. • No wiring required. • Powered by a single A23 12V battery. • Water Resistant.

Remote Spot Light Spot/Flood Light - Stainless Steel Part No.

Lumens Rotation (lm)

Tilt

Volts (V)

Amps (A)

Watts (W)

Controller Includes

Dimensions L x W x H (mm)

70186

2500

60°

100

Joystick

212 x 114 x 252

70187

10.5m Control Cable Extension

350°

SUITABLE FOR

12V/24V

IP67

• H4 halogen bulb. • 100W spot / 90W flood light. • 316G stainless steel. • 350° rotation in 13 seconds (Fast mode). • Dual speed (Normal / Fast). • Protection Rating: IP67. • Jam protection. • 775m of lighting range @ 0.25 Lux2. • Certified in compliance with EN55015 + EN61547 CE certified. Joystick Control Panel: • Joystick provides smooth horizontal vertical operation. • Power on and off switch. • Normal and fast speed switch. • Modern panel design with composite stylish faceplate. • Water Resistant. Caution: Not suitable for boats that regularly exceed 15 knots in rough water. 114.8

212 252

70187

FAST

SPOT

SLOW

FLOOD

DELETED

OFF

120

145

Search Light - Remote Colour

Rotation

Tilt

Volts (V)

Bulb Watts (W)

Dimensions L x W x H (mm)

70180

White

360°

70°

220 x 160 x 220

70190

White

360°

70°

2 x 55

220 x 257 x 210

70192

White

360°

70°

2 x 55

220 x 257 x 210

70198

Replacement 12V sealed bulb to suit single search light

70199

Replacement 24V sealed bulb to suit single search light

70197

Replacement 12V sealed bulb to suit double search light

70193

Replacement 24V sealed bulb to suit double search light

70196

Replacement 12V Dual Station Control

70195

Replacement 24V Dual Station Control

70178

Replacement 12V Panel Control

70179

Replacement 24V Panel Control

70194

4 Metre Extension Cable

SUITABLE FOR

12V/24V

IP67

Lighting & Electrical

Part No.

70180

• Sealed beam. • ABS plastic making it suitable for all marine environments. • UV resistant. • Fully waterproof construction. • Search lights include a waterproof remote control and quick lead. • Protection Rating: IP67. Control panel: C ut out dimensions 90mm x 60mm x 70mm (L x W x D). on/off switch. Waterproof 4 way movement buttons. Caution: Not suitable for boats that regularly exceed 15 knots in rough water.

70190 / 70192

Replacement dual station control

70194

70193 / 70197

70198 / 70199

www.samallen.com.au

370

Manual Spot Light Spot Light - Hardtop - Manual - Stainless Steel SUITABLE FOR

12V/24V

IP56

Volts (V)

Watts (W)

Deck Maximum Thickness (mm)

Light Housing Ø (mm)

30°

250W Bulb

150

30°

10-32

10W LED

150

Part No.

Tilt

701806 701802

• Solid handle. • Rubber gaskets provide a water tight seal. • Nylon ball joint holder provides smooth and easy movement. • Stainless steel housing. • All materials are noncorrosive and nonmagnetic. • Stainless steel mounting bolts included. 150mm

Approx 15° Tilt Up and Down

DELETED

234mm From Deck to Top of Light

701806 120° Bolt Angle

156mm Handle Length

73mm Mounting Hole

701802

Navigation Lights

LED Navigation Lights LED - Navigation Lights - Horizontal Mounting

LED - Navigation Lights - Portable

Lighting & Electrical

Part No.

Type

Lumens (lm)

709651

Bi-Colour

Screw/Suction

225°

709654 All Round White

Screw/Suction

360°

171

709656 All Round White

Screw

360°

650

Mount Type

• Ideal for small boats or kayak. • Quick release pin for portability and storage. • High-impact plastic construction. • LED sealed polycarbonate housing. • Water resistant switch. • Multiple mounting options. • Protection Rating: IP65. • 3 x AAA batteries that will last up to 72 hours with normal use. NOTE: Batteries not included.

Light Height Angle (mm)

Part No.

709631 Stainless steel 112.5° Bi-Colour 12

0.1

1.1 86 x 69 x 39

709632 Stainless Steel 112.5°

0.1

1.1 88 x 69 x 39

709656

Frame

Angle

Type

Volts Amps Watts Dimensions (V) (A) (W) L x W x D (mm)

P&S

• UV resistant polycarbonate housing. • 3 x 5050 SMD LED's. • Protection Rating: IP67. • Internationally approved ABYC-A16/USCG, 2 NM up to 12 meter vessels. • Horizontal mount. • CE approved. NOTE: 709632 sold in pairs. SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

IP67

GEN

IP65

LED

709631 - With stainless steel cover

Suction mount for 709651/709654 709654 709631 709632 - With stainless steel cover

Stainless steel cover slides over the light 709651 Ideal for:

371

Kayaks

Inflatables

Tinnies

709632

Run Abouts

www.samallen.com.au

LED Navigation Lights LED - Navigation Lights - Vertical Mounting

LED - Navigation Lights - Orsa

Angle

Type

Volts Amps Watts Dimensions (V) (A) (W) L x W x H (mm)

Part No.

Frame

709634 Stainless 112.5° Steel

P&S

709520

Black

709636

White

112.5°

P&S

0.1

1.1

77 x 55 x 38

709521

Black

709638

Black

112.5°

P&S

0.1

1.1

77 x 55 x 38

709522

Black

Stern

709523

Black

Masthead

709524

White

Port

709525

White

709526

White

709527

White Masthead

Part No.

Frame

0.1

1.1

79 x 57 x 40

• UV resistant polycarbonate housing with 304G stainless steel cover. • 3 x 5050 SMD LED's. • Protection Rating: IP67. • Internationally approved ABYC-A16/USCG, 2 NM up to 12 meter vessels. • Side Mount. • Wire 500mm tinned. • CE approved. NOTE: Sold as a pair.

709634

709638

Type

Angle

Volts (V)

Amps (A) 12/24

Watts (W)

Port

112.5°

12/24

0.18/0.09

2.2

Starboard 112.5°

12/24

0.18/0.09

2.2

135°

12/24

0.18/0.09

2.2

225°

12/24

0.18/0.09

2.2

112.5°

12/24

0.18/0.09

2.2

Starboard 112.5°

12/24

0.18/0.09

2.2

135°

12/24

0.18/0.09

2.2

225°

12/24

0.18/0.09

2.2

Stern

• UV resistant housing. • High powered LED. • Reverse polarity protected. • Protection Rating: IPX6. • Light dimensions: 70 x 64 x 59. • Internationally approved ABYC-A16/USCG, 2 NM up to 20 meter vessels. • Side Mount. • Up to 50,000 hours. • CE approved. NOTE: Sold in singles.

709636

SUITABLE FOR

12V

IP67

LED - Navigation Light - Flip Up Part No.

Frame

Angle

Type

709490 Stainless Steel 112.5° P & S

Volts Amps Watts Dimensions (V) (A) (W) L x W x H (mm)

0.03 0.4

709521

709522

709524

709525

709523

709526

709527

117 x 91 x 40

• Corrosion resistant stainless steel housing. • Flip over option lets you stow the light when not in use, preventing a tripping hazard. • Internationally approved ABYC-A16/USCG, 2 NM up to 12 meter vessels. • Flush Mount. • CE approved.

SUITABLE FOR DC 12V / 24V MULTI-VOLTS

IP67

12V

LED - Stern Light - Stainless Steel

SUITABLE FOR DC 12V / 24V MULTI-VOLTS

709520

Lighting & Electrical

DC 12V / 24V MULTI-VOLTS

12V

LED Angle Type Housing Volts Amps Watts Dimensions Part No. Colour (V) (A) (W) L x D (mm)

709630 White 135° Stern Stainless 12 0.02 0.3 Steel

Scan for install insructions

ITC

88 x 15

• 4 hole surface mounting clear acrylic base with a 316G stainless steel cover. • Low profile. • 3 x 5050 SMD LED's • Protection Rating: IP67. • Internationally approved ABYC-A16/USCG 2NM up to 12 meter vessels. • Mounting screws included. • CE approved. SUITABLE FOR

12V/24V

IPX6

www.samallen.com.au

372

LED Navigation - Anchor Lights LED - Anchor Lights - Telescopic - Plug-In - Pole Only SUITABLE FOR DC 12V / 24V MULTI-VOLTS

Part No.

12V

Approved Amps Watts Lens Dia. LED Colour Minimum Volts (A) (W) Ø (mm) Visibility (V)

Length (mm)

709641

White

2 NM

0.8

860 - 1520

709640

White

2 NM

0.8

660 - 1210

• Telescopic 360° LED Anchor light extends from 860mm to 1520mm for improved visibility. • Ultra durable sealed polycarbonate housing with an anodised aluminium shaft. • Internationally approved ABYC-A16 USCG 2 NM. • Can be removed for storage when not being used. • Telescopic pole.

LED - Plug-In Anchor Light - Bases Part No.

709644

2 pin configuration

709646

Pin Protrusion Dimensions Type (mm) L x W x H (mm)

Description

S/S Light Base Socket with 709644 Round Adapter

54 x 54 x 97

709646 Nylon Light Base Socket

100 x 42 x 90

• Fits most after market plug-in 2 pin anchor lights. • Mounting screws included.

2 pin configuration

LED - Anchor Lights - Telescopic - Plug-In Kit - Pole & Base Part No.

Approved Amps Watts Lens Dia. LED Colour Minimum Volts (V) (A) (W) Ø (mm) Visibility

Lighting & Electrical

709649

White

2 NM

9-33

0.1

Length (mm)

835 - 1675

• Telescopic 360° LED Anchor light extends from 835mm to 1675mm for improved visibility. • Securely plugs in. • Quick and easy removal for stowage. • Meets EMC EN60945, USCG & ABYC-A16 standards. • Protection Rating: IP67. • Telescopic pole.

LED - Anchor Lights - Folding SUITABLE FOR DC 12V / 24V MULTI-VOLTS

Part No.

12V

Approved Amps Watts Lens Dia. LED Colour Minimum Volts (A) (W) Ø (mm) Visibility (V)

709642

White

2 NM

0.1

300

709643

White

2 NM

0.1

600

• Polycarbonate housing with alloy shaft. • Fixed folding surface mount 360° LED Anchor light. • Can be folded down when not in use. • 360° lighting area. • Wing nut for quick release folding base. • Internationally approved ABYC-A16 USCG COLREG 2NM A-16 up to 12 meter vessels. 709642

709643

373

Length (mm)

www.samallen.com.au

LED Navigation - Anchor Lights LED - Anchor Lights - H/D Fold Down Base

LED - Anchor Lights - Folding - Small

Approved LED Part No. Colour Minimum Visibility

Volts (V)

Amps @12V (A)

Watts Lens Dia. Height (W) Ø (mm) (mm)

Part No.

709650 White

9-33

0.09

1.1

709645 White

3 NM

709647 White

3 NM

2 NM

305

• Simple fold down mechanism. • White LED illumination with a minimum visible distance of 2 nautical miles. • 360° visible angle. • Securely plugs in. • Meets EMC EN60945, USCG & ABYC-A16 standards. • Protection Rating: IP67. IP67

LED Approved Volts Colour Minimum (V) Visibility

Amps @12V Watts (W) (A)

Base LxW (mm)

Height (mm)

9-33

0.1

1.2

83 x 83

203

9-33

0.1

1.2

83 x 83

305

• Ideal for yachts and power boats up to 50 metres. • Polycarbonate housing with alloy shaft. • Fixed folding surface mount 360° LED Anchor light. • Can be folded down when not in use. • 360° lighting area. • Internationally approved ABYC-A16 USCG 3 NM. • Protection Rating: IP67. IP67

MULTI-VOLTS

709647

DELETED 709645

Twist locking nut to fold the anchor light down Twist locking nut to fold the anchor light down

LED - All Round Anchor Light

LED - Anchor Light

Base LxW (mm)

Dimensions ØxH (mm)

709648 White

83 x 83

83 x 35

3 NM

9-33

0.1

1.2

• Ideal for yachts and power boats up to 50 metres. • Fixed surface mount 360° LED Anchor light. • Bright Taiwanese LED chip sealed in a polycarbonate housing. • 360° lighting area. • ABYC-A16 standards. • 4.6mm mounting holes. • Protection Rating: IP67. IP67

Approved Volts Amps Watts LED Minimum Part No. Colour (A) (W) Visibility (V)

Base LxW (mm)

Dimensions Ø x H (mm)

709639 White

60 x 25

56 x 104

2 NM

0.08

• Fixed surface mount 360° LED Anchor light. • Bright Taiwanese LED chip sealed in a polycarbonate housing. • 360° lighting area. • Internationally approved ABYC-A16 USCG 2 NM up to 12 meter vessels. • 170mm length of tinned wire and mounting screws included. • 3mm mounting holes.

MULTI-VOLTS

Lighting & Electrical

Approved Volts Amps Watts LED Minimum Part No. Colour (V) @12V (W) Visibility (A)

83mm

57mm

65mm

SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

60mm

LED - Masthead & Foredeck Lamp Amps Watts (A) (W)

709628 White

0.08

3 NM

9-33

Base LxW (mm)

Dimensions WxHxD (mm)

IP67

MULTI-VOLTS

195 x 141 195 x 141 x 61

• Ideal for yachts and power boats up to 20 metres. • Flexible mounting wings. • Can be mounted on a variety of mast profiles. • 225° lighting area. • Illuminates large areas of deck or superstructure. • ABYC-A16 standards. • Protection Rating: IP67.

Down light for illuminating deck areas 175mm

61mm 141mm

Approved Volts LED Minimum Part No. Colour (V) Visibility

195mm

www.samallen.com.au

374

LED Navigation - Tri-Colour/Anchor Light LED - Navigation Light - Tri-Colour/Anchor Part No.

LED Colour

Approved Minimum Visibility

Volts (V)

Watts (W)

Dimensions Ø x H (mm)

709670

Tricolour (Port/Starboard/Stern) All Round White

2 NM

12/24

<2.0

115 x 82

• Combined tri-colour and all-round white light. • Tri-colour: Port 112.5° Red fwd / Starboard 112.5° Green fwd / Stern 135° aft White. • Anchor: 360° White. • Horizontal mast mount. • Protection Rating: IP67. • Meets COLREG72, IEC60945 & ABYC A-16 2 NM up to 20 meter vessels. • 500mm extended wire included. • Mounting screws included. • CE approved.

Navigation Lights - Large Vessel

Lighting & Electrical

Navigation Lights - 55 Series IP56

Light Colour

View Angle

Approved Distance

Vessel Size

7092804 Masthead

White

225°

5 NM

7092805

Stern

White

135°

2 NM

7092806

Starboard

Green

112.5°

2 NM

7092807

Port

Red

112.5°

2 NM

7092809

All Round

White

360°

2 NM

7092810

All Round

Green

360°

2 NM

7092811

All Round

Red

360°

2 NM

7092813

Towing

Yellow

135°

2 NM

Less Than 50Mtr Less Than 50Mtr Less Than 50Mtr Less Than 50Mtr Less Than 50Mtr Less Than 50Mtr Less Than 50Mtr Less Than 50Mtr

Part No.

Type

Volts (V)

Watts (W)

Dimensions Ø x H (mm)

12/24

160 x 222

12/24

160 x 222

12/24

160 x 222

12/24

160 x 222

12/24

160 x 222

12/24

160 x 222

12/24

160 x 222

12/24

160 x 222

• Matt black polycarbonate reinforced with fibreglass. • Fresnel polycarbonate shock resistant lens. • Protection Rating: IP56. • Requires a BAY15D, 12V or 24V bulb, sold separately. • Cable Gland PG13 from below or from the side.

120mm

222mm

360° models shown

Ø8.5mm

375

120mm 160mm

www.samallen.com.au

Navigation Lights - Large Vessel Navigation Lights - 70 Series Light Colour

View Angle

7092823 Masthead

White

225°

7092824

White Green

Part No.

Type

Stern

7092826 Starboard

Approved Vessel Size Distance

Watts (W)

Dimensions Ø x H (mm)

6 NM

24VDC 40W 20Mtr Plus 220/240VAC 60-65W

200 x 290

135°

3 NM

24VDC 40W 20Mtr Plus 220/240VAC 60-65W

200 x 290

112.5°

3 NM

24VDC 40W 20Mtr Plus 220/240VAC 60-65W

200 x 290

24VDC 40W 20Mtr Plus 220/240VAC 60-65W 24VDC 40W 20Mtr Plus 220/240VAC 60-65W 24VDC 40W 20Mtr Plus 220/240VAC 60-65W 24VDC 40W 20Mtr Plus 220/240VAC 60-65W

200 x 290

7092827

Port

Red

112.5°

3 NM

7092828

Tow

Yellow

135°

3 NM

7092831 All Round

Red

360°

3 NM

7092832 All Round

White

360°

3 NM

Volts (V)

IP56

200 x 290 200 x 290 200 x 290

• Matt black polycarbonate reinforced with fibreglass. • Fresnel polycarbonate shock resistant lens. • Protection Rating: IP56. • Requires a P28S, 24V or 220V or 240V bulb, sold separately. • Cable Gland PG13 from below or from the side.

155mm

290mm

360° models shown

Ø11mm

155mm 200mm

Navigation Lights - 70 Series - Duplex View Angle

7092823D Masthead

White

225°

6 NM

24VDC 20Mtr Plus 220/240VAC

7092824D

White

135°

3 NM

24VDC 20Mtr Plus 220/240VAC

Green

112.5°

3 NM

24VDC 20Mtr Plus 220/240VAC 24VDC 20Mtr Plus 220/240VAC 24VDC 20Mtr Plus 220/240VAC 24VDC 20Mtr Plus 220/240VAC 24VDC 20Mtr Plus 220/240VAC

Type

Stern

7092826D Starboard

Approved Vessel Size Distance

7092827D

Port

Red

112.5°

3 NM

7092828D

Tow

Yellow

135°

3 NM

7092831D All Round

Red

360°

3 NM

7092832D All Round

White

360°

3 NM

Volts (V)

Watts (W)

40W 60-65W 40W 60-65W 40W 60-65W 40W 60-65W 40W 60-65W 40W 60-65W 40W 60-65W

Dimensions Ø x H (mm)

IP56

200 x 470

Lighting & Electrical

Light Colour

Part No.

200 x 470 200 x 470 200 x 470 200 x 470 200 x 470 200 x 470

155mm

470mm

• Matt black polycarbonate reinforced with fibreglass. • Fresnel polycarbonate shock resistant lens. • Protection Rating: IP56. • Requires 2x P28S, 24V or 220V or 240V bulbs, sold separately. • Cable Gland PG13 from below or from the side.

360° models shown

Ø11mm

155mm

200mm

www.samallen.com.au

376

Bulb Replacement LED Replacement

LED - Replacement - G4 Lumens Pin Style Volts (lm) (V)

Part No.

LED Colour

53210

Cool White

170

Side

10-30

LED - Navigation Replacements - BAY15D Amps (A)

Watts (W)

0.15

1.8

• Ideal for use in many marine, automotive, RV and domestic applications. • Cooler operating temperature. • 10 x 5050 SMD chip LED's. • Most commonly used for replacing G4 bulbs.

SUITABLE FOR

12V/24V

Part No.

LED Colour

70948

White

Contact Type

Volts Amps Watts Dimensions Sold As (V) (A) (W) L x Ø (mm)

Double 10-30 0.29 3.5

IP68

12V/24V

70 x 30 Single

• Ideal use in all approved brands of navigation lights. • Anodised aluminium heat sink housing. • Offset pin. • Protection Rating: IP68.

SUITABLE FOR

LED - Replacements - Flat - Festoon Volts Amps Watts Dimensions Sold As Part No. LED Colour Lumens (lm) (V) (A) (W) L x W (mm)

LED - Replacements - MR11 Part No.

LED Colour

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

53226

Cool White

105

10-30

0.1

1.2

709834 Cool White 12V

DC 12V / 24V MULTI-VOLTS

• Ideal for use in many marine, automotive, caravan, motorhome, camper trailer and domestic applications. • 5050 SMD chip LED's

SUITABLE FOR

12V/24V

0.03

0.4

36 x 22

Single

• Ideal for use in many marine, automotive, caravan, motorhome, camper trailer and domestic applications. Most commonly used for small craft navigation lights and marine or automotive courtesy and interior fittings.

SUITABLE FOR

LED - Replacement - Dome Light Part No.

LED Colour

Lumens (lm)

Volts (V)

53230

Cool White

345

10-30

Part No.

LED Colour

Lumens (lm)

Volts (V)

12V/24V

Amps Watts Diameter (A) (W) (mm)

Lighting & Electrical

53216

Cool White

150

10-30

0.3

53219

Warm White

150

10-30

0.3

• Ideal use in marine, automotive, caravan, motorhome and camper trailer applications. • Replaces MR16 fitting.

SUITABLE FOR

12V/24V

LED Lumens Contact Pin Type Volts Amps Watts Dimensions Colour (lm) Type (V) (A) (W) L x Ø (mm)

Cool 53234 White Cool 53236 White Cool 53238 White

130 Double Parallel 12

0.1

1.2

46 x 18

130 Double Off Set 12

0.1

1.2

46 x 18

130

0.1

1.2

46 x 18

Single Parallel 12

• Ideal for use in many marine, automotive, caravan, motorhome, camper trailer and domestic applications. • 53236: stop/tail only.

Part No.

12V

53234

53236

0.2

2.5

57 x 57

Lumens (lm)

Volts (V)

Amps (A)

Watts (W)

Dimensions Ø x T (mm)

450

0.6

130 x 19.5

• Replaces 'D' fluro tubes in caravans and motorhomes. • USA LED chips. • Eco friendly, no glass or mercury like traditional fluro's. • Constant non-flicker light output. • Uses up to 90% less power. SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

53238

DELETED

377

LED Colour

53240 Cool White

SUITABLE FOR DC 12V / 24V MULTI-VOLTS

Dimensions L x W (mm)

LED - Replacement - 'D' Fluro Tube

LED - Replacements - BA15 Part No.

Watts (W)

• Ideal for use in many marine, automotive, caravan, motorhome, camper trailer and domestic applications. • 23 x super bright 5050 SMD chip LEDs comparable to a 30 halogen. • Self adhesive tape on full length mounting pads. • Comparable to a 30 watt halogen • 5 connectors included: G4, BA15D, BA15S, T10 and a festoon 41mm. • 120° lighting angle. • Quality Taiwanese chips.

SUITABLE FOR

LED - Replacements - MR16

Amps (A)

www.samallen.com.au

LED Trailer Lights LED - Box Trailer Lights - Kit

Bulbs - Replacements - Halogen Part No.

Type

Contact Type

Pin Type

Volts (V)

Bulb Watts (W)

Part No.

Function

Current Draw @ 13.8V

Volts (V)

HZP220.65

P28s Nav Bulb

Single

Blade

220

547102

P28s Nav Bulb

Single

Blade

0.09A-1.2W 0.02-0.3W 0.09-1.22W

HZP24.40

Stop Tail Indicator

HZP240.65

P28s Nav Bulb

Single

Blade

240

NG1225

BAY15D Nav Bulb Double

Off Set

NG2425

BAY15D Nav Bulb Double

Off Set

HZE220.65

E27 Nav Bulb

Single

Screw

220

NG22065

B22 Nav Bulb

Single

Parallel

220

NG23040

B22 Nav Bulb

Single

Parallel 230 - 240

NG2460E27

E27 Nav Bulb

Single

Screw

Side

Dimensions L x H x D (mm)

Left/Right 100 x 100 x 21

• Compact LED combination Lamp. • 100,000 hour rated LED lifespan with solid state technology. • Water and dust proof. • Submersible. • Sealed polycarbonate lens and housing. • Integrated reflector. • Pre-wired 300mm sheathed tinned wire. • Maintenance free. • Stainless steel twin stud mount. • ADR/ECE approved. • Approvals: Ind - E4-6R-0116003 12V S/T - E4-7R-0216003 Ref - E4-3R-0216003 • Sold in pairs. 21mm 70mm SUITABLE FOR

DC 12V / 24V MULTI-VOLTS

P28S Base

E27 Base

BAY15D Base

B22 Base

SUBMERSIBLE

100mm

LED Truck & Trailer Lights

100mm

Truck & Trailer Lights

LED - Trailer Lights - Kits Stop Tail Indicator Stop 547108 Tail Indicator

0.09A-1.2W 0.02-0.3W 0.09-1.22W 0.1A-1.4W 0.05A-0.7W 0.1A-1.4W

Part No.

547104

Volts (V)

Side

LED - Trailer Lights - 162mm with Cable Dimensions L x H x D (mm)

Left/Right 150 x 80 x 23

Left/Right 162 x 80 x 19

• Compact LED combination Lamp. • 100,000 hour rated LED lifespan with solid state technology. • Water and dust proof. • Submersible. • Sealed polycarbonate lens and housing. • Integrated reflector. • Pre-wired 300mm sheathed tinned wire. • Maintenance free. • Stainless steel twin stud mount. • ADR/ECE approved. • 547104 Approvals: Ind - E4-6R-0115611 S/T - E4-7R-0215611 Ref - E4-3R-0215611 • 547108 Approvals: Ind - CRN 46077 12V Stop - CRN 46100 Tail - CRN 46139 Ref - CRN 46123 • Sold in pairs. 547104 SUITABLE FOR

DC 12V / 24V MULTI-VOLTS

100mm

23mm

80mm

SUBMERSIBLE

Part No.

Function

Cable Dimensions Current Draw Volts Side Length LxHxD @ 13.8V (V) (m) (mm)

Stop 0.1A-1.4W Tail 0.05A-0.7W 10-30 Left Indicator 0.1A-1.4W Stop 0.1A-1.4W Tail 0.05A-0.7W 10-30 Right 547113 Indicator 0.1A-1.4W Number Plate Stop 0.1A-1.4W 547114 Tail 0.05A-0.7W 10-30 Left Indicator 0.1A-1.4W Stop 0.1A-1.4W Tail 0.05A-0.7W 10-30 Right 547115 Indicator 0.1A-1.4W Number Plate

547112

7.2 162 x 80 x 35 7.2 162 x 80 x 35 8.3 162 x 80 x 35 8.3 162 x 80 x 35

• Compact LED combination Lamp. • 100,000 hour rated LED lifespan with solid state technology. • Water and dust proof. • Submersible. • High Impact ABS housing and polycabonate lens. • Integrated reflector. • Pre-wired 7.2m or 8.3m sheathed tinned wire. • Maintenance free. 35mm • Simple surface mount design. 100mm • ADR/ECE approved. • Approvals: Ind - CRN 46076 80mm S/T - CRN 46097, 46098 Ref - CRN 46123 162mm • 547114/547115 have side marker lights.

Lighting & Electrical

Function

Current Draw @ 13.8V

150mm

547104

100mm

19mm

547108

Right hand number plate light SUITABLE FOR

80mm 162mm 547108

DC 12V / 24V MULTI-VOLTS

12V

SUBMERSIBLE

UPON INSTALLATION MAKE SURE THE TWO DRAINAGE HOLES ARE AT THE BOTTOM!

www.samallen.com.au

Water drainage hole at the base of trailer light housing.

378

Truck, Trailer, Marker & Number Plate Lights LED - Trailer Lights - Plug 'n' Play Kit Part No.

Function

Current Draw @ 12V

Volts Light Dimensions (V) L x H x D (mm)

547118

Indicator/Stop Tail Number Plate Marker Lamps

0.13A-1.6W 0.03A-0.4W 0.08A-1W 0.04A-0.5W

150 x 80 x 28

547117 Trailer Lights (Pair) Only • LED slimline rear stop/tail, indicator, licence plate light. • Flat pin and large round pin plug included. • Plug 'n' play harness with waterproof connectors. • Ideal for trailers up to 7m. • Brighter than conventional incandescent systems. • High Impact ABS housing and polycabonate lens. • Maintenance free. • ADR/ECE approved • Protection Rating: IP66 and IP68.

LED - Number Plate Lights Mount Style

Part No.

Function

547194

Number Plate Light

Volts (V)

Dimensions L x W x D (mm)

Top Screw 10-30

81 x 41 x 34

• Brighter than conventional incandescent systems. • 100,000 hour rated LED lifespan with solid state technology. • Water, dust, vibration and shock proof. • High Impact ABS housing and polycabonate lens. • Pre-wired 300mm tinned wire. • Maintenance free. • Simple surface mount design. • ADR/ECE approved. • Approvals: CRN 46101 SUITABLE FOR

12V/24V

SUITABLE FOR DC 12V / 24V MULTI-VOLTS

12V

SUBMERSIBLE

45mm 41mm

34mm 81mm

LED - Trailer Light Boards

LED - Marker Lights

Lighting & Electrical

Part No.

Function

Current Cable Draw Watts Dimensions Length Volts (V) @ 13.8V (W) L x W x D (mm) (m) (A)

Amber Side Directional Marker Red/Amber Side 547181 Position Marker Red Rear 547182 Position Marker White Front 547183 Marker 547180

0.5 10-30 0.05

0.7

60 x 30 x 22

0.5 10-30 0.05

0.7

60 x 30 x 22

0.5 10-30 0.05

0.7

60 x 30 x 22

0.5 10-30 0.05

0.7

60 x 30 x 22

Part No.

Volts

Length (m)

Height (mm)

Sockets

54535

1.5

115

Quick Change Plugs

54536

1.8

115

Quick Change Plugs

• Interchangeable plug system with the three most popular plugs included, 7 pin flat, 7 pin round and 7 pole large round. • Supplied with 8 metres of cable moulded to a newly designed universal socket. • Easy plug in/out attachment. • 2 mounting points. • ADR compliant.

• Brighter than conventional incandescent systems. • 100,000 hour rated LED lifespan with solid state technology. • High Impact ABS housing and polycabonate lens. • Compact body allows fitment into tight applications. • Pre-wired 0.5m or 2.5m tinned wire. • Separate clip in lens and surface mount base. • Pre-wired sheathed tinned wire. • ADR/ECE approved. SUITABLE FOR

12V/24V

547180

547181

547182

547183 7 Pin Flat

379

www.samallen.com.au

7 Pin Round

5 Pole Large Round

Gauges

Kus Gauges Gauges - Fuel Tank - LED Bezel Display Back Light OHMS (Ω)

Part No.

MARINE

Volts (V)

or Black Black Red Yellow 240-33 12/24 Empty - Full or 40109W White White Red Yellow 240-33 12/24 Empty - Full 40109

Whether it's a small pleasure craft or an ocean going vessel, KUS products offer outstanding performance and precision, while providing exceptional value. All product go through environmental chambers that simulate the hottest and coldest of climates and shock benches that simulate the roughest of terrain conditions.

Gauges - Holding Tank Display

Back Light

OHMS (Ω)

Volts (V)

Display Range

or 40114 Black Black Red Yellow 240-33 12/24 Empty - Full or 40114W White White Red Yellow 240-33 12/24 Empty - Full

Cut Out Ø (mm)

52 52

• Double layer reinforced anti-fogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified.

40114W

Bezel Display Back Light OHMS (Ω)

Part No.

Bezel Display

or Black Black Red Yellow or 40110W White White Red Yellow or 40108 Black Black Red Yellow or 40108W White White Red Yellow or 43712 S/S Black Red Yellow or 43710 S/S White Red Yellow 40110

Volts (V)

Display Range

or Black Black Red Yellow 0-190 12/24 Empty - Full or 40106 Black Black Red Yellow 240-33 12/24 Empty - Full or 40106W White White Red Yellow 240-33 12/24 Empty - Full

52 52 52

40104/40106

Gauges - Water Temp Display Range

240-33 12/24 Empty - Full

Cut Out Ø (mm)

Part No.

Bezel

Display Back Light

Volts (V)

Display Range °C

Cut Out Ø (mm)

40080

Black

Red

12/24

25 - 120

Red or Yellow Red or Yellow Red or Yellow

12/24

40 - 120

12/24

40 - 120

12/24

40 - 120

240-33 12/24 Empty - Full

40119

Black

0-190 12/24 Empty - Full

40119W

White

0-190 12/24 Empty - Full

43718

S/S

White

240-33 12/24 Empty - Full

240-33 12-24 Empty - Full

• Double layer reinforced anti-fogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified.

40110W/ 40108W

Cut Out Ø (mm)

• Double layer reinforced anti-fogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified.

43718 43712

Volts (V)

40106W

• Double layer reinforced anti-fogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified.

43710

40109

40104

40114

OHMS (Ω)

Gauges - Water Tank

Gauges - Fuel Tank Back Light

40119W

40080

Lighting & Electrical

Bezel

Cut Out Ø (mm)

• Double layer reinforced anti-fogging lens. • 6 green and 2 red LED indicators. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified.

40109W

Part No.

Display Range

40119

40110/ 40108

www.samallen.com.au

380

Kus Gauges Gauges - Oil Temp Part No.

Bezel

Display Back Light

40118

Black

40118W

White

Red or Yellow Red or Yellow

Gauges - Volt Meter

Volts (V)

Display Range °C

Cut Out Ø (mm)

Part No.

Bezel

Display

Back Light

12/24

50 - 150

40122

Black

12/24

50 - 150

40122W

White

40123

Black

43714

S/S

White

Red or Yellow Red or Yellow Red or Yellow Red or Yellow

40050

Black

Red

• Double layer reinforced anti-fogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified.

Volts (V)

Display Range V

Cut Out Ø (mm)

8 - 16

18 - 32

8 - 16

12/24

9 - 32

• Double layer reinforced anti-fogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified. 40118W

40118

Gauges - Oil Pressure Part No.

Bezel

Display Back Light OHMS (Ω)

43720

S/S

White

43721

S/S

White

43780

Black

43782

White

43784

Black

43786

White

Red or Yellow Red or Yellow Red or Yellow Red or Yellow Red or Yellow Red or Yellow

Display Cut Volts Range (Bar/ Out Ø (V) PSI) (mm)

10-184 12/24 0-10 / 145

240-33 12/24 0-10 / 145

10-184 12/24 0-5 / 75

10-184 12/24 0-10 / 145 10-184 12/24 0-10 / 145

Lighting & Electrical

43784

43782

43780

Bezel

Display

Back Light

40121

Black

40121W

White

43716

S/S

White

Red or Yellow Red or Yellow Red or Yellow

12/24 0 - 99999

43720 / 43721 40121W

0-190 12/24

± 50

43722

S/S

White

0-190 12/24

± 50

43724

S/S

White

43725

S/S

Black

40121

Gauges - Trim & Tilt Display Back Light OHMS (Ω)

Black

Volts (V)

• Double layer reinforced anti-fogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified.

40120W

12/24 0 - 99999

Bezel

40120

Cut Out Ø (mm)

Part No.

Display Back Light OHMS (Ω)

Display Range

12/24 0 - 99999

Cut Out Ø (mm)

Bezel

40120W White White

Volts (V)

Display Range (A)

Part No.

40050

• Double layer reinforced anti-fogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified.

43716

Red or Yellow Red or Yellow

40122

Gauges - Digital Hour Meter

Gauges - Amp

381

40122W

Part No.

• Double layer reinforced anti-fogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified.

43786

43714

www.samallen.com.au

Display Range

Cut Out Ø (mm)

Red or 0-190 12/24 Up / Down 52 Yellow Red or 160-10 12/24 Up / Down 52 Yellow Red or 160-10 12/24 Up / Down 52 Yellow

• Double layer reinforced anti-fogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified.

40120

Volts (V)

Kus Gauges Gauges - Clock Part No.

Bezel

Display Back Light Display Rage

43770

S/S

White

Gauges - Tacho/Hour Meter Volts (V)

Display Range

Cut Out Ø (mm)

Red or 12 Hour 12/24 Analogue 52 Yellow

• Double layer reinforced anti-fogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified.

Part No.

Bezel

Display

Back Light

43746

S/S

Black

43750

Black

43758

White

43756

S/S

White

43759

S/S

White

Red or Yellow Red or Yellow Red or Yellow Red or Yellow Red or Yellow

Volts (V)

Display (rpm)

Cut Out Ø (mm)

12/24 0 - 4000

12/24 0 - 6000

12/24 0 - 7000

12/24 0 - 6000

• Uses stepper motor drivers to display the information. • Double layer reinforced anti-fogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified. • 43756 features 4 alarm LEDs, pressure, temp, check engine and low oil.

Gauges - Rudder Angle Part No.

Bezel

Volts Display Back Light OHMS (Ω) (V)

43654

Black

Display Range

Red or 0-190 12/24 Port Yellow Starboard

Cut Out Ø (mm)

• Double layer reinforced anti-fogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified.

43746

Display

Back Light

43700

S/S

Black

43704

S/S

White

Red or Yellow Red or Yellow

43750

Volts (V)

Display (Knots)

Cut Out Ø (mm)

12/24

0 - 999

12/24

0 - 999

• Double layer reinforced anti-fogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Supplied with GPS puck. • Protection Rating: IP67. • CE Certified. NOTE: Customers can choose between units in km/h, knots or mph. The unit mileage and position are integrated into the display

Part No.

Bezel

Display Back Light

43695

S/S

Black

43696

S/S

White

Red or Yellow Red or Yellow

Volts (V)

Display

Cut Out Ø (mm)

12/24 0 - 110km/h

• Double layer reinforced anti-fogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • 5m GPS antenna is included. • The signal comes directly from the satellite signal receiver. • High precision and quick location confirmation. • Supplied with GPS puck. • Protection Rating: IP67. • CE Certified.

43695

Lighting & Electrical

Bezel

43758

Gauges - GPS & Speedo

Gauges - Digital GPS & Speedo Part No.

43756

43696

Gauges - Speedo

43704

43700

Part No.

Bezel

Display Back Light

43740

S/S

White

Red or Yellow

Volts (V)

Display

12/24 0 - 65mph

Cut Out Ø (mm)

• Double layer reinforced antifogging lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified. NOTE: Requires "Speedo Hose Kit" on page 383.

www.samallen.com.au

382

Kus Gauges Panels & Accessories Gauges - Four Gauge Panel with Alarm Part No.

Description

Back Display Light

Volts (V)

Mount Screws

Cut Out W x H (mm)

43800

4 Gauge Panel

Black Red 12/24 4 x 5mm 235 x 155

• Ideal for any diesel engine set-up requiring multiple gauges. • Double layer reinforced anti-fogging lens on gauges. • Pre-wired for easy install. • LED indicators. • Water temperature alarm. • Oil pressure alarm. • Panel gauges: 1 x Digital volt meter 1 x Water temp 1 x Oil pressure 1 x 4000rpm Tacho/hour meter • Black alloy panel - 250mm x 190mm. • 2 keys included. • CE Certified. • Senders sold separately. NOTE: Recommended that gauges be installed by an authorised marine electrician.

Gauges - Four Gauge Box Back Part No. Description Display Light

43804

5 Gauge Panel

Overall Dimensions W x H x D (mm)

Volts (V)

Mount Screws

4 x 5mm 240 x 195 x 135

Black Red

• Ideal for any diesel engine set-up requiring multiple gauges. • Double layer reinforced anti-fogging lens on gauges. • Breaker switch (20A). • Manual or auto switch (Hi-temp or low oil pressure). • Engine stop switch. • Lamp check switch (for all gauge lamps). • Buzzer alarm warning. • Panel gauges: 1 x Digital volt meter 1 x Digital water temp 1 x Oil pressure 1 x 4000rpm Tacho/hour meter • Black steel box with heavy-duty plastic panel. • 2 keys included. • CE Certified. • Senders sold separately. NOTE: Recommended that gauges be installed by an authorised marine electrician.

Gauges - Five Gauge Panel - NMEA 2000

Lighting & Electrical

Part No.

Description

Display

Back Light

Volts (V)

Mount Screws

Cut Out W x H (mm)

43806

5 Gauge Panel

Black

Red

12/24 4 x 5mm 245 x 145

• Ideal for any diesel engine set-up requiring multiple gauges. • Double layer reinforced anti-fogging lens on gauges. • Able to be connected to anything running an NMEA 2000 setup. • Panel gauges: 1 x Volt meter 1 x Fuel level 1 x Water temp 1 x Oil pressure 1 x 4000rpm Tacho/hour meter • Black alloy panel - 270mm x 170mm. • 2 keys included. • CE Certified. • Senders sold separately. NOTE: Cut-out along the bottom will need an extra 5mm in the middle for the ignition switch. Recommended that gauges be installed by an authorised marine electrician.

Speedo Hose Kit 86104

Part No.

Colour

Length (ft)

86104

Black

86106

White

• Suits most Speedo's. • Includes mounting fixtures. 86106

Rudder Angle Sensor & Connecting Rod Part No.

www.samallen.com.au

OHMS (Ω)

43652 43653

Rudder Angle Sender Connecting Rod

Rudder Angle Sensor

43653

383

Type

Single Gauge Dual Rudder Angle Sensor Gauges

43650

43650/43652

Description

0-190 0-190

Kus Gauge Accessories Gauge Accessories Description

Part No.

Volts Range Output (V) (Bar) (Ω)

Description

Alarm (Bar)

Thread

40099

52mm Chrome Bezel

40094

85mm Black Blank Plate

40095

85mm White Blank Plate

40096

52mm Black Blank Plate

40097

52mm White Blank Plate

40025

43640

Wiring Loom for Gauge

• High Quality Long Service Life Pressure Sensor. • Excellent anti-vibration performance. • Operating Voltage: 6V~24V. • Operating temperature: -25 ~120°C (120°C MAX 1H). • Protection Rating: IP66. • Measuring range: 0~5Bar or 0~10Bar. • Alarm: 0.8Bar or 1.5Bar. • Output signal: Standard resistance value: 10~184Ω.

40094 - 40097

40099

43640

Temp Senders Part No.

Type

Volts (V)

40020

Pressure Sender

6-24

0-5

10-184

–

1/8"NPT

40022

Pressure Sender

6-24

0-10 10-184

–

1/8"NPT

40023

Pressure Sender Bar Switch Pressure Sender Bar Switch

6-24

0-10 10-184 0.5±0.2 1/8"NPT

6-24

0-10 10-184 0.8±0.2 1/8"NPT

40020

Max Alarm Dimensions (mm) (⁰C) (⁰C) Ø L1 L2

40022

Thread

40003

Oil

6-24 150

28.5

40004

Oil

6-24 150

28.5

51 1/4" - 18NPT

40005

Oil

6-24 150

28.5

1/8"-27NPT

40006

Oil

6-24 150

28.5

3/8"-18NPT

40007 Oil Switch 6-24 150 120 8-11

71.5 3/8"-18NPT

M18 x 1.5

40008 Oil Switch 6-24 150 120 8-11

71.5 1/2" - 14NPT

40009

Water

6-24 120

51.5 1/8"-27NPT

40011

6-24 120

10.7

71.5

40012

Water Switch Water Switch

6-24 120

10.7

71.5 3/8"-18NPT

40014

Water

6-24 120

–

7.5 28.5

40016

Water

6-24 120

–

M18 x 1.5

Sender Alarm Module SAB High/Low Part No.

Description

OHMS (Ω)

40028

Sender Alarm Module SAB High/Low

240-33

• Suitable for many senders and gauges. • Allows the user to add high and low level alarm signal to the control and monitoring system. • The High/Low level can be adjusted by turning the two adjusting knobs. • Easy to install.

1/8"-27NPT

28.5 58.7 3/8"-18NPT

• Brass main body. • Rated voltage: 6V~24V. • Temperature response time: Minimum 3 minutes after power supply electrified. • Protection Rating: IP67. • 40011 and 40016 Sensors have double metal plate connectors. • 40011 - Temperature Sensor Alarm Switch • Alarm Switch Rated Power: 1.2W~3W. • Temperature alarm tolerance: ±3C.

Resistance Exchanger Part No.

40131

40003/40006

40023

40004/40005/40014

40007/40008/40011

Lighting & Electrical

Part No.

Pressure Sensor

Description

Resistance Exchanger

OHMS (Ω)

0-190/240-33

• Suitable for many senders and gauges • Easy to install. • Converts: 0 -190 OHM to 240-33 OHM. 240-33 OHM to 0-190 OHM.

Ø L1 L2

40016

40009

www.samallen.com.au

384

Tank Senders Tank Senders - Fuel/Water 5 Hole 40124

Lighting & Electrical

OHMS (Ω)

100

240-33

110

240-33

120

240-33

5 Hole

140

240-33

Stainless Steel Sender

5 Hole

150

240-33

Stainless Steel Sender

5 Hole

175

240-33

40134

Stainless Steel Sender

5 Hole

40135

Stainless Steel Sender

5 Hole

40136

Stainless Steel Sender

5 Hole

40140

Stainless Steel Sender

40150 40175 40180

Stainless Steel Sender

5 Hole

180

240-33

40195

Stainless Steel Sender

5 Hole

195

240-33

40200

Stainless Steel Sender

5 Hole

200

240-33

40220

Stainless Steel Sender

5 Hole

220

240-33

40225

Stainless Steel Sender

5 Hole

225

240-33

40235

Stainless Steel Sender

5 Hole

235

240-33

40240

Stainless Steel Sender

5 Hole

240

240-33

40250

Stainless Steel Sender

5 Hole

250

240-33

40265

Stainless Steel Sender

5 Hole

265

240-33

40275

Stainless Steel Sender

5 Hole

275

240-33

40280

Stainless Steel Sender

5 Hole

280

240-33

40300

Stainless Steel Sender

5 Hole

300

240-33

40325

Stainless Steel Sender

5 Hole

325

240-33

40335

Stainless Steel Sender

5 Hole

335

240-33

40350

Stainless Steel Sender

5 Hole

350

240-33

40375

Stainless Steel Sender

5 Hole

375

240-33

40400

Stainless Steel Sender

5 Hole

400

240-33

40450

Stainless Steel Sender

5 Hole

450

240-33

40500

Stainless Steel Sender

5 Hole

500

240-33

40600

Stainless Steel Sender

5 Hole

600

240-33

40124

Sender Gasket Nitrile suit Standard 5 Hole Pattern • Utilising magnetic field to control the reed on-off switch, the sender features a long service life and protection against vibration. • Output signal: 240~33Ω. • 316G stainless steel main body. • SAE Standard: 5 mounting holes. • Operating temperature: -40°C - +85°C. • Protection Rating: IP67. • 2mm thick FPM gasket. • 250mm tinned wire with PVC cover. • Stainless steel mounting screws included. • 33mm float diameter. NOTE: Special sizes available to order. Length is measured from underside of the flange to the base of the shaft.

° 72

Length

M5-5

Depth

Length (mm)

Description

68° �54 �36��42

Mount Style Mount� SAE Standard Flange (mm)

Part No.

> 12m

68°

Moun�ng Flange on Tank

Tank Senders - Waste Part No.

Description

Mount Style

Mount Flange � (mm)

Length (mm)

OHMS (Ω)

100

240-30

Sender Waste Tank - 6 Hole

42100 - 42410

42525 & 42800

42100

Stainless Steel Sender

40130

Replacement Stainless Steel Fixing Kit (suits 42100 only)

42205

Stainless Steel Sender

6 Hole

200

240-30

42305

Stainless Steel Sender

6 Hole

300

240-30

42410

Stainless Steel Sender

6 Hole

400

240-30

6 Hole

Sender Waste Tank - 1-1/4" BSP

40130

385

42525

Stainless Steel Sender

1-1/4" BSP

250

240-30

42800

Stainless Steel Sender

1-1/4" BSP

800

0-180

• Stainless steel. • Rubber gasket and stainless steel screws included. • 40130 adaptor plate goes into the tank to allow the bolts to thread.

www.samallen.com.au

Tank Senders Tank Senders - Fuel/Water 1-1/4 BSP Senders 240-30 OHMS

Sender Adaptors OHMS (Ω)

Part No.

Description

41101

Stainless Steel Sender

1-1/4" BSP

100

240-33

41125

Stainless Steel Sender

1-1/4" BSP

125

240-33

41150

Stainless Steel Sender

1-1/4" BSP

150

240-33

41175

Stainless Steel Sender

1-1/4" BSP

175

240-33

41200

Stainless Steel Sender

1-1/4" BSP

200

240-33

41225

Stainless Steel Sender

1-1/4" BSP

225

240-33

41240

Stainless Steel Sender

1-1/4" BSP

240

240-33

41250

Stainless Steel Sender

1-1/4" BSP

250

240-33

41265

Stainless Steel Sender

1-1/4" BSP

265

240-33

41275

Stainless Steel Sender

1-1/4" BSP

275

240-33

41300

Stainless Steel Sender

1-1/4" BSP

300

240-33

41325

Stainless Steel Sender

1-1/4" BSP

325

240-33

41335

Stainless Steel Sender

1-1/4" BSP

335

240-33

41350

Stainless Steel Sender

1-1/4" BSP

350

240-33

41375

Stainless Steel Sender

1-1/4" BSP

375

240-33

41400

Stainless Steel Sender

1-1/4" BSP

400

240-33

41425

Stainless Steel Sender

1-1/4" BSP

425

240-33

41450

Stainless Steel Sender

1-1/4" BSP

450

240-33

41475

Stainless Steel Sender

1-1/4" BSP

475

240-33

41500

Stainless Steel Sender

1-1/4" BSP

500

240-33

41550

Stainless Steel Sender

1-1/4" BSP

550

240-33

41600

Stainless Steel Sender

1-1/4" BSP

600

240-33

41650

Stainless Steel Sender

1-1/4" BSP

650

240-33

41700

Stainless Steel Sender

1-1/4" BSP

700

240-33

41800

Stainless Steel Sender

1-1/4" BSP

800

240-33

41850

Stainless Steel Sender

1-1/4" BSP

850

240-33

41900

Stainless Steel Sender

1-1/4" BSP

900

240-33

41100

Stainless Steel Sender

1-1/4" BSP

1000

240-33

41675B

Stainless Steel Sender

1-1/4" BSP

1675

240-33

43600

Stainless Steel Sender

600

0-180

1100

0-190

Part No.

Description

40125

Stainless Steel Topside &Underside Flange suits 1-1/4" BSP

40126

Stainless Steel Weld in Flange suits 1-1/4" BSP

40127

Weld in Flange suits 5 Hole Sender M5 Blind

40128

Nylon Flange Fixing Kit suits 1-1/4" BSP

40129

Alloy Weld in Flange suits 1-1/4" BSP

DELETED

40125

Senders 0-180 OHMS

1-1/4" BSP

Senders 0-190 OHMS

431100

Stainless Steel Sender

1-1/4" BSP

40126

• Utilising magnetic field to control the reed on-off switch, the sender features a long service life and protection against vibration. • Output signal: 240~33Ω / 0~180Ω / 0~190Ω. • 316G stainless steel main body. • 1-1/4" BSP twist-on thread assembly. • Operating temperature: -40°C - +85°C. • Protection Rating: IP67. • Mounting: 38mm x 2.6mm O-ring. 43mm x 3.5mm O-ring. • 250mm tinned wire with PVC cover. • 33mm float diameter. NOTE: Special sizes available to order. Length is measured from underside of the flange to the base of the shaft.

Lighting & Electrical

Mount Mount Style Flange � Length (mm) (mm)

Length

40127

40128 0129 - Tack weld in 3 spots and 4 add 1 1/2" BSP bolt, this acts as a heat sink and allows the flange to keep its shape when fully welding in place.

40129

www.samallen.com.au

386

When multiple NMEA 2000 Senders are installed in a single boat, consult a Sam Allen Wholesale Specialist for sender programming before shipping.

NMEA 2000

Gauges & Senders

About NMEA 2000®

NMEA 2000® Advantages

NMEA 2000® is the new standard in marine electronics data protocol. Established by the National Marine Electronics Association, for networking multiple instruments on a boat. As long as the electronics carry the NMEA 2000® Certified tag, all of the instruments, gauges and electronics will work together seamlessly.

•

MEA 2000 is based on the CAN-BUS automotive standard, designed N to achieve a high data exchange between multiple electronic devices.

•

Supports plug 'n play technology so the marine electrical equipment installation, maintenance and exchange are simple.

•

MEA 2000 provides flexibility between brands allowing you to use N different brands for your setup.

Gauges - Fuel Level - NMEA 2000 Part No. Display

Gauges - Voltmeter - NMEA 2000

Signal

Back Light

Volts (V)

Display Range

Dia. Ø (mm)

Signal

Back Light

Volts (V)

Display Range

Dia. Ø (mm)

NMEA 2000

Red

8 ~ 16V

42430

Black

NMEA 2000

Red

Empty - Full

42442

42432

White

NMEA 2000

Blue

Empty - Full

• Double layer reinforced anti-fogging lens. • 316G stainless steel bezel with curved lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified.

Lighting & Electrical

42432

Gauges - Water Temp - NMEA 2000

Gauges - Water Level - NMEA 2000 Part No. Display

Signal

Back Light

Volts (V)

Display Range

Dia. Ø (mm)

42434

Black

NMEA 2000

Red

Empty - Full

42436

White

NMEA 2000

Red

Empty - Full

Gauges - Holding Tank - NMEA 2000 Part No. Display

42438

Black

42430

42436

Part No. Display

42446

Black

Back Light

Volts (V)

Display Range

Dia. Ø (mm)

NMEA 2000

Red

Low - Full

Signal

Back Light

Volts (V)

Display Range

Dia. Ø (mm)

NMEA 2000

Red

40 ~ 120°C

Gauges - Oil Pressure - NMEA 2000 Part No. Display

Signal

387

Part No. Display

42450

Black

Signal

Back Light

Volts Display Range Dia. Ø (V) (Bar/PSI) (mm)

NMEA 2000

Red

www.samallen.com.au

0-10 / 145

NMEA 2000 Gauges & Accessories Gauges - Multi-Function Tacho - NMEA 2000 Part No. Display

Signal

Back Light

Volts (V)

Display Range

Dia. Ø (mm)

42454

Black

NMEA 2000

Red

0 - 7000

42456

White

NMEA 2000

Red

0 - 7000

• The multi-function Tachometer LCD displays temperature, voltage, pressure, speed and engine hours. • Double layer reinforced anti-fogging lens. • 316G stainless steel bezel with curved lens. • Plug 'n Play multi-plug socket lead supplied (100mm). • Protection Rating: IP67. • CE Certified.

NMEA - Analog to NMEA 2000 Converter Volts Range (V)

Range (OHM)

40030 Analog to NMEA 2000 Converter

8-32

240 - 33

40032 Analog to NMEA 2000 Converter

8-32

0 - 190

Part No.

Description

• Universal adapter that allows one analog fuel/fresh water/waste water/live well/oil/black water senders or engine performance sensors to the NMEA 2000 network. • Male "micro-C" pinout connector. • Operation temperature: -40°C - +85°C. • Maximum current: 50mA. • IP7 rated. • Plug 'n Play. • CE Certified.

NMEA - Bluetooth Gateway 42454

Gauges - Speedo - NMEA 2000 Part No. Display

Signal

Back Light

Volts (V)

Display Range

Dia. Ø (mm)

42458

Black

NMEA 2000

Red

0 ~ 60MPH

42460

White

NMEA 2000

Blue

0 ~ 60MPH

42460

42458

Part No.

Volts (V)

Power Current (A)

Protection Rating

Dimensions (mm)

Installation

40038

9-16

0.045

60 x 40x 20

Micro-C

• Plug 'n Play NMEA 2000 gateway for real-time engine data transmission. • Built-in Bluetooth, supporting data transfer to mobile devices via Wi-Fi or Bluetooth. • Easy installation with a standard micro-connector, no extra devices required. • Customisable data display based on user needs. • Displayed Network Data: Fuel and water tank levels; engine data and voltage; vessel course and speed; positioning details; wind speed and direction. • CE Certified.

NMEA - Terminals & Connectors Part No.

Lighting & Electrical

42456

Description

40034 NMEA 2000 Analog Converter 4 Channel 8-32V

Senders - Stainless Steel - NMEA 2000 Part No.

Mount Style

Signal

Length (mm)

40152 40182 40202 40227 40237 40277 40302 40377 40452 40502

1-1/4" BSP 1-1/4" BSP 1-1/4" BSP 1-1/4" BSP 1-1/4" BSP 1-1/4" BSP 1-1/4" BSP 1-1/4" BSP 1-1/4" BSP 1-1/4" BSP

NMEA 2000 NMEA 2000 NMEA 2000 NMEA 2000 NMEA 2000 NMEA 2000 NMEA 2000 NMEA 2000 NMEA 2000 NMEA 2000

150 180 200 225 235 275 300 375 450 500

• Utilising magnetic field to control the reed on-off switch, the product features a long service life and protection against vibration. • Output signal: NMEA 2000 Network Messages. • 304G stainless steel main body. • SAE standard 5 mounting holes and BSP. • Operating temperature: -30°C ~ +80°C. • Connector: Male "Micro -C" Pin out. • 2mm thick FPM gasket. • 1M network cable. • Stainless steel screws included. • 33mm float diameter. • CE Certified. NOTE: Special sizes available to order. Length is measured from underside of the flange to the base of the shaft.

40133 Network Set Up Tool to suit NMEA 2000 42482 120 OHM Terminal - Female 42484 120 OHM Terminal - Male 42486 T-Connector - 180° 42488 T-Connector - 90° 42490 NMEA 2000 1m Cable - suits 52mm Gauge 42492 NMEA 2000 1m Cable - suits 85mm Gauge 424942 NMEA 2000 Cable with Female Connector 424950 NMEA 2000 Drop Cable with Male & Female Connectors 2000 Backbone Cable with Male & Female 424952 NMEA Connectors 424960 NMEA 2000 Convert Cable suits Honda engine • All NMEA 2000 fittings are standardised to fit all other NMEA 2000 certified products. • Simply add a T-Connector to add more to the system. • Plug 'n Play. • CE Certified.

40034

www.samallen.com.au

40133

42482

42484

42490

42492

42486

42488

388

Wiper Systems

Single Drive System Wiper Motor - Single Drive Systems - W12

39855/39877/39880

3.7

11.2

7.5

Permissible current

Required Speed Shaft power

Dimensions L x W x D (mm)

39854

W12

Black

170 x 100 x 59

39855

W12

White

170 x 100 x 59

39873

W12

Black

170 x 100 x 59

39877

W12

White

170 x 100 x 59

39880

W12

White

170 x 100 x 59

Volts 12/24

Speed (RPM) Power Out (W)

12V 24V 8

Volts (V)

100

Characteristics curve

(Slow speed - motor unit)

Length Thread Motor Shaft (mm) Length (mm) Colour

• Rigid Aluminium Housing. • 12Nm of torque. • Insulated ground for metal, plastic and wooden boats. • Adjustable sweep angle from 45° to 110° for maximum visibility. • Adjustable park position right or left with 2 speeds, 35/55 RPM. • Will power up to 610mm x 560mm arm and blade combination. • Compatable with W12 accessories. • Protection Rating: IP65. • CE certified and EMC protected.

39854/39873

W RPM

Part No.

170 0

2.4

4.8

7.2

Torque (Nm)

9.6

Make It Your Way!

12 Amps

For a more detailed instruction and to help you pick the right Roca wiper setup, scan the link and enter the information to help pin point the right solution for you.

WARNING IF FITTING TO CURVED SCREENS SETTINGS WILL NEED TO BE ADJUSTED!

Pantograph Wiper Arm suits W12 Part No.

Lighting & Electrical

Pantograph Arm 39869

Standard Wiper Arm

Description

Suits Motor

Adjustable Length (mm)

39864

Pantograph Wiper Arm

39877 / 39880

324 - 460

39866

Pantograph Wiper Arm

39877 / 39880

454 - 591

39869

Replacement Plate & Shaft for Pantograph Arm

• Stainless steel frame with black anti glare paint. • Adjustable arm length. • J-hook connection fits most wiper blades on the market. • 39864 & 39866 includes 39869 for installation to suit single drive wiper motor.

Standard Wiper Arm suits W12 Part No.

Description

39862

Standard Wiper Arm

Suits Motor

Adjustable Length (mm)

39877 / 39880

319 - 458

• Stainless steel frame with black anti glare paint. • Adjustable arm length. • J-hook connection fits most wiper blades on the market.

Wiper Blades - Single Drive Wiper Blade

Saddle adaptor

389

Saddle adaptor

Part No.

Description

Size (mm)

39870

Wiper Blade

305

39872

Wiper Blade

355

39874

Wiper Blade

406

39876

Wiper Blade

457

39878

Wiper Blade

508

39879

Wiper Blade

559

• Zinc plated with black anti glare paint. • Natural rubber profile with stainless steel backer. • 2 adaptors to fit wiper arms with a straight connection or J-hook connection.

www.samallen.com.au

Wiper Kits Windscreen Wiper / Washer - Kit Part No.

Description

Motor Colour

Arm Length (mm)

Wiper Blade Length (mm)

39998

Windscreen Wiper / Washer Kit

Black

454 - 590

508

40000

Windscreen Wiper / Washer Kit

White

454 - 590

508

40001

Windscreen Wiper / Washer Kit

White

454 - 590

508

40002

Windscreen Wiper / Washer Kit

White

324 - 460

457

400010

Windscreen Wiper Kit (No Washer)

White

482 - 609

508

39998 Kit

• This wiper kit is complete with wiper and water container for freshwater windscreen washing. • Quiet operation. • 2 speed motor. • Easy adjustable sweep - Angle from 45° to 110°. 39998 Kit Includes: • 1 x 39866 - Adjustable Pantograph Arm 454mm - 590mm. • 1 x 39878 - Ultra Deluxe Wiper Blade 508mm. • 1 x 39854 - Waterproof Wiper Motor 2 Speed 12V Black. • 1 x 39886 - Windshield washer kit, includes 2Ltr bottle, 12V Pump, 110cm hose, hose retainers and 1 x arm mounted, twin jet nozzle. • 1 x 39840 - Wiper 12V Switch 3 Position. • 1 x 530722 - Blue illuminated IP67 Rated push button switch. • 1 x 530731 - Wiring Harness - Suits 530722. 40000 Kit Includes: • 1 x 39866 - Adjustable Pantograph Arm 4454mm - 590mm. • 1 x 39878 - Ultra Deluxe Wiper Blade 508mm. • 1 x 39877 - Waterproof Wiper Motor 2 Speed 12V White. • 1 x 39886 - Windshield washer kit, includes 2Ltr bottle, 12V Pump, 110cm hose, hose retainers and 1 x arm mounted, twin jet nozzle. • 1 x 39840 - Wiper 12V Switch 3 Position. • 1 x 530722 - Blue illuminated IP67 Rated push button switch. • 1 x 530731 - Wiring Harness - Suits 530722.

40000 Kit / 40002 Kit

Lighting & Electrical

40001 Kit Includes: • 1 x 39866 - Adjustable Pantograph Arm 454mm - 590mm. • 1 x 39878 - Ultra Deluxe Wiper Blade 508mm. • 1 x 39877 - Waterproof Wiper Motor 2 Speed 12V White. • 1 x 39886 - Windshield washer kit, includes 2Ltr bottle, 12V Pump, 110cm hose, hose retainers and 1 x arm mounted, twin jet nozzle. • 1 x 39840 - Wiper 12V Switch 3 Position. 40002 Kit Includes: • 1 x 39864 - Adjustable Pantograph Arm 324mm - 460mm. • 1 x 39876 - Ultra Deluxe Wiper Blade 457mm. • 1 x 39877 - Waterproof Wiper Motor 2 Speed 12V White. • 1 x 39886 - Windshield washer kit, includes 2Ltr bottle, 12V Pump, 110cm hose, hose retainers and 1 x arm mounted, twin jet nozzle. • 1 x 39840 - Wiper 12V Switch 3 Position. • 1 x 530722 - Blue illuminated IP67 Rated push button switch. • 1 x 530731 - Wiring Harness - Suits 530722. 400010 Kit Includes: • 1 x 39866 - Adjustable Pantograph Arm 482mm - 609mm. • 1 x 39878 - Ultra Deluxe Wiper Blade 508mm. • 1 x 39877 - Waterproof Wiper Motor 2 Speed 12V White. • 1 x 39840 - Wiper 12V Switch 3 Position. WARNING IF FITTING TO CURVED SCREENS SETTINGS WILL NEED TO BE ADJUSTED!

40001 Kit

www.samallen.com.au

400010 Kit

390

Single Drive Systems Wiper Motor - Single Drive Systems - W25 Shaft Length Thread (mm) Length (mm)

Part No.

Motor

39836

W25

39837

W25

Volts (V)

Dimensions W x H x D (mm)

194 x 115 x 182

• Heavy-duty single-driven windshield wiper motor. • 25Nm of torque with a strong drive system, powering up to 750mm / 750mm arms and blades. • Adjustable sweep angle from 40° to 110° for maximum visibility. • Adjustable park position right or left with 2 speeds, 35/55 RPM. • Will power any compatible arm and blade available. • CE certified and EMC protected.

Characteristics curve

Speed (RPM) Power Out (W)

Permissible current

Required Speed

Shaft power

Torque (Nm)

115

12V 24V

(Slow speed - motor unit)

Volts 12/24

RPM

182

194

Make It Your Way!

For a more detailed instruction and to help you pick the right Roca wiper setup, scan the link and enter the information to help pin point the right solution for you.

25 Amps

WARNING IF FITTING TO CURVED SCREENS SETTINGS WILL NEED TO BE ADJUSTED!

Pantograph Arm suits W25 Part No.

Lighting & Electrical

Pantograph Arm

39898

Description

391

Adjustable Length (mm)

39836 / 39837

470 - 750

39839

Pantograph Wiper Arm

39898

Replacement Plate & Shaft for Pantograph Arm

• Stainless steel frame with black anti glare paint. • For single drive wiper motors. • Fits our W25 system. • Saddle width 16 mm. • Includes wiper blade adapter and spray nozzle. • 39898 for installation to suit single drive wiper motor.

Deluxe Wiper Blade suits W25

Deluxe Wiper Blade

Saddle adaptor

Suits Motor

Part No.

Description

Suits Arm

Size (mm)

39894

Deluxe Wiper Blade

39839

559

39896

Deluxe Wiper Blade

39839

610

• Zinc plated with black anti glare paint. • Natural rubber profile with stainless steel backer. • Includes a 16mm saddle adaptor.

www.samallen.com.au

Dual Drive Systems Wiper Motor - Dual Drive Systems - W38 Shaft Length Thread (mm) Length (mm)

Part No.

Motor

39882

W38

103

39883

W38

103

Volts (V)

Dimensions W x H x D (mm)

210 x 110 x 175

• Heavy-duty powder coated steel frame. • 2.5" stainless steel drive shaft. • 38Nm of torque. • Insulated ground for metal, glass reinforced plastic and wooden boats. • Adjustable sweep angle from 40° to 110° for maximum visibility. • Adjustable park position right or left with 2 speeds, 35/55 RPM. • Will power any compatible arm and blade available. • CE certified and EMC protected. Characteristics curve

Speed (RPM) Power Out (W)

210

Make It Your Way! For a more detailed instruction and to help you pick the right Roca wiper setup, scan the link and enter the information to help pin point the right solution for you.

110 175

12V 24V

(Slow speed - motor unit) Required Speed

Permissible current Shaft power

Torque (Nm)

Volts 12/24

RPM

38 Amps

WARNING IF FITTING TO CURVED SCREENS SETTINGS WILL NEED TO BE ADJUSTED!

Part No.

39892

Description

Pantograph Wiper Arm

Suits Motor

Adjustable Length (mm)

39882 / 39883

470 - 750

• Stainless steel frame with black anti glare paint. • Adjustable arm length. • Saddle width 16mm. • Suits bolt on blades. • Includes spray tube and nozzle.

Pantograph Arm

Deluxe Wiper Blade suits W38 Part No.

Description

Suits Arm

Size (mm)

39894

Deluxe Wiper Blade

39892

559

39896

Deluxe Wiper Blade

39892

610

• Zinc plated with black anti glare paint. • Natural rubber profile with stainless steel backer. • Includes a 16mm saddle adaptor.

Lighting & Electrical

Pantograph Arm suits W38

Deluxe Wiper Blade

Saddle adaptor

www.samallen.com.au

392

Wiper Accessories Wiper Controller - Electronic

Wiper Switch - 3 Position

Part No.

Description

Volts (V)

Dimensions Cut-Out W x H x D (mm) W x H (mm)

Part No.

39830

Electronic Wiper Controller

12/24

70 x 70 x 72

Position 39840 3 Switch Position 39842 3 Switch

57 x 57

• Smart touch panel. • 1 to 3 wiper configuration. • Wipers can be switched on individually or in any combination. • Rated to 4A per wiper motor. • 15A fuse size. • Range of 5 timing regulations. • LED interface. • Relay box with plug-in cable. • Wall thickness 6mm-25mm. • Compatible with other brands.

Description

Volts (V)

Switch

Off/On/On

Cut Out (mm)

Dimensions H x W (mm)

12 36.8 x 21.1 49 x 24

Off/On/(On)* 12 36.8 x 21.1 49 x 24

• Suitable for 2 speed wiper motors. • Protection Rating: IP68. • 39842 illuminated. • 39840 non illuminated. NOTE: 39842 replacement switch for 39884 and 39844. 39840 replacement switch 39840 for 39877 and 39880.

39842

DELETED

Wiper Control Box Part No.

39844

Wiper Control System Part No.

Description

Motor 39832 Wiper Control Box Motor 39833 Wiper Control Panel

Volts (V)

Dimensions W x H x D (mm)

Fits

Cut-Out W x H (mm)

12/24 192 x 40 x 108

Up to 3 Motors

12/24

3 Motors

80 x 79

98 x 101 x 28

Lighting & Electrical

• The control panel is connected to the control box by one serial cable (CANBUS cable) with two 8-pole plugs. • Each wiper can be operated separately. • Fits W12, W25, and W38. • Three intermittent speeds. • One or two continuous speeds. • Synchronized sweeps at any mode. • Motor brake. • Washing program. • An additive control panel can be added to work from different stations. • The system is composed of one control panel* and one control box which are sold separately. NOTE: *You can also choose a switch instead of a panel.

39832

Motor Control Box

Suits Motor Volts (V)

Dimensions L x W x H (mm)

Suits All

99 x 33 x 59

12/24

• Suits one motor (10Nm - 50Nm). • Includes 1 illuminated carling switch and cable with a IP68 rating. • Synchronised sweep: I nterval. Slow speed. Fast speed. • When running, push switch to momentary for more then 1 second to start the washer. • Small design maximises space. • Easy to install. • Use additional switch for dual control (39842). • CE certified.

Wiper Switch - Integrated Part No.

Description

Switch

Suits Motor

Volts (V)

Cut Out (mm)

Dimensions H x W (mm)

39845 Integrated Wiper Switch On/Off W10/W12 12/24 36.5 x 21 49.5 x 24 • This wiper control is suited for low-power motors* with a parking switch. • It works both with single-speed and double-speed motors. • Three buttons in the switch allow you to manage all the functions needed for windscreen cleaning: On/Off, timing, and washing program. • No screws are required for the installation. • Pigtales are included. • CE certified.

39833

393

Description

www.samallen.com.au

Wiper Accessories Wiper J Blade Arm Connector Part No.

39868

Description

Windshield Washer Kit Tank Size Volts Tank Dimensions (Ltr) (V) W x H x D (mm)

Suits Arms

Part No.

39864 39866 39862

39886

Washer Complete Kit

124 x 230 x 100

J Hook Adapter

• Replacement J hook. • Plastic.

Description

39887

Washer Complete Kit

39888

Nozzle & Attachment Kit suits 39886 / 39887 / 39889

39996

Pump Only Suits 39886

• Kit includes: Polypropylene tank. Motor. Tubing and fittings to attach to wiper arm.

Spring for Wiper Arms Part No.

39867A

Description

Wiper Arm Spring 180N S/S

• Spare springs for ROCA wiper arms.

Windshield Washer - Bulkhead Fitting

Water Tank with Pump

Description

39881

Bulkhead Fitting suits Washer Hose

122

• Ideal for connecting washer hose between bulkheads. • Cut to required length.

Tank Size Volts Tank Dimensions (Ltr) (V) L x W x H (mm)

Part No.

Description

39889

Water Tank with Pump

39888

Nozzle & Attachment Kit suits 39886 / 39887 / 39889

498 x 105 x 194

• Water tank with a 12V pump tubing and T connection. • Polypropylene Tank. NOTE: Requires spray kit 39888.

Lighting & Electrical

Maximum Overall Thickness Length (mm) (mm)

Part No.

Wiper Motor - Control Box Part No.

Description

39884

Motor Control Box

Suits Motor

Volts Dimensions (V) L x W x H (mm)

39877 / 39880 12/24 106 x 80 x 34

• Stainless steel and aluminium body. • Suits 1 - 3 motors (12Nm). • Includes 1 illuminated carling switch and cable with a IP68 rating. • Synchronised sweep: I nterval. Slow speed. Fast speed. • When running, push switch to momentary for more then 1 second to start the washer. • Small design maximises space. • Easy to install. • Use additional switch for dual control (39842). • CE certified.

Windscreen Washer Tee Joiner Part No.

39997

Description

Windscreen Washer Tee Joiner

Suits Size I.D. (mm)

• Windscreen washer tee joiner for connecting and branching windscreen washer hoses.

www.samallen.com.au

394

Wiper Accessories Wiper Motor - Heavy-Duty Part No.

39853

DELETED

Description

Heavy-Duty Wiper Motor

Volts (V)

• 2 speed motor with self parking. • 4 sweep angles, 83°, 100°, 110° and 120°. • Amp draw: H igh speed - 1.5A @12V Low speed - 1.0A @12V • 65mm shaft length with a diameter of 16mm. • 10nm motor. • Compatible with Roca W12 arms and blades. • Maximum blade length of 508mm.

Wiper Kit - Waterproof Cover Part No.

39847

DELETED

Description

Waterproof Wiper Kit

Volts (V)

• White waterproof casing covering the motor. • Kit includes: Motor with cover. Adjustable stainless steel arm 180-280mm. 280mm stainless steel / rubber blade. • Self parking with a 110° sweep angle. • 87mm shaft length with a diameter of 12mm. • Amp draw - 1.0A @12V. • Not recommended for commercial or prolonged use.

Wiper Arm/Blade - Stainless Steel Frame

Lighting & Electrical

Part No. 39856

Description

Size (mm)

39856

Wiper Arm TMC S/S Light Duty suit 39215 & 39847

280

39857

Wiper Blade TMC light duty suit 39215 & 39847

280

39859

Wiper Blade TMC light duty suit 39215 & 39847

355

• Stainless steel frame. • High quality rubber blade.

39857 / 39859

DELETED

Wiper Kit - Stainless Steel Cover Part No.

DELETED

39215

Description

Stainless Steel Wiper Kit

• Marine grade stainless steel covering the motor. • Kit includes: Motor with cover. Adjustable stainless steel arm 180-280mm. 280mm stainless steel / rubber blade. • Self parking with a 110° sweep angle. • Amp draw - 1.0A @12V. • 60mm shaft length with a diameter of 9mm. • Not recommended for commercial or prolonged use.

395

www.samallen.com.au

Volts (V)

Horns & Trumpets Horns & Trumpets

Trumpet - Surface Mounting - Stainless Steel Part No.

Decibels @ 1m

Description

Frequency (Hz)

Dimensions L x W x D (mm)

Volts (V)

53718

Single Trumpet

118

388

400 x 100 x 115

53719

Single Trumpet 2 Amp

120

321

400 x 100 x 115

53720

Dual Trumpet

117

375

400/460 x 200 x 125

53722

Dual Trumpet

117

357

400/460 x 200 x 125

24 53718/53719

• 304G stainless steel construction from inside and out. • Pre wired. • Fasteners sealed in resin to block moisture. • Vibration reduction pads. • Meets the ABYC A-23 for boats up to 12 metres.

53720/53722

Trumpet - Shorty - Stainless Steel Part No.

Decibels @ 1m

Description

Frequency (Hz)

Dimensions L x W x D (mm)

Volts (V)

53724

Shorty Trumpet

114

410

355 x 90 x 100

53726

Dual Shorty Trumpet

114

410

405 x 190 x 100

53724

Horns - Recessed - Stainless Steel Max Low Pitch. Grill Decibels Frequency Draw Dimensions Dimensions Volts @ 1m (Hz) (V) (A) L x W x D (mm) (mm)

Part No.

Description

53700

Single Horn

106

410

75 x 80 x 45

124 x 60

53702

Double Horn Kit

106

410

75 x 80 x 45

124 x 60

53704

Cover to suit horns

53700

Lighting & Electrical

53726

53702

53704

Horns - Flush Mount - Stainless Steel Part No.

Description

Decibels @ 1m

Frequency (Hz)

Dimensions L x W x D (mm)

Volts

53729

Compact Dual Horn

1112

403

205 x 80 x 50

• Suits Grady White and many other USA built boats. • 304G stainless steel construction from inside and out. • Pre wired.

www.samallen.com.au

396

Caframo Fans Sirocco II Fans

Sirocco II is Australia's Choice! The Sirocco II is the best-loved fan for RVs and boats. With 3 speeds, 4 timer settings, there’s no other marine or RV fan that matches the Sirocco II’s reliable performance. You can go further, stay longer, and enjoy more time doing what you love with the people you love. Feel like a sleepin? The Sirocco II is ideal for chilling out: with whisperquiet operation and incredibly low power draw you’ll enjoy thousands of hours of uninterrupted coolness.

Fan - 3 Speed - Sirocco II Volts Max Airflow Dimensions (V) (CFM) L x W x H (mm)

Part No.

Description

Colour

53139

Sirocco II

White 12/24

53139OEM

Sirocco II

White 12/24

185

89 x 241 x 304

53141

Sirocco II

Black

12/24

185

89 x 241 x 304

Sirocco II

Black

12/24

185

89 x 241 x 304

53141OEM

185

89 x 241 x 304

53168

White Replacement Fan Blade to suit Sirocco II

53170

Black Replacement Fan Blade to suit Sirocco II

Lighting & Electrical

• 3 speed fan offers quite operation with a unique gimbaled design that allows airflow to be directed in any direction. • Can be folded flat against the bulkhead when not in use. • 4 preset timer settings with timer indicator lights, 3, 6, 9 and 12 hours. • Draws less then 0.34 amps at high speeds. • 2 mounting options, self adhesive or permanent. • RCM Certified to Australian Standards.

360° of airflow

Easy to install

Preset time indicator

397

www.samallen.com.au

Bora & Ultimate Fans Fan - 3 Speed - Bora Description

Colour

Volts Max Airflow Dimensions (V) (CFM) L x W x H (mm)

53130

Bora

White

130

89 x 165 x 241

53132

Bora

Black

130

89 x 165 x 241

53134

Bora

White

130

89 x 165 x 241

53136

Bora

Black

130

89 x 165 x 241

Part No.

• 3 Variable fan speeds, for ideal sleeping environment. • Compact design with a locking cam mount. • Can be mounted sideways, upright and downwards. • Draws low power at high speeds. • On/off switch in the centre of the grill. • RCM Certified to Australian Standards.

DELETED

Fan - 2 Speed - Ultimate - Lighter Plug Part No.

Fan - 2 Speed - Ultimate - Hard Wired

Volts Max Airflow Dimensions (V) (CFM) L x W x H (mm)

Description

Colour

53148

Ultimate

White

200

127 x 58 x 140

53149

Ultimate

Black

200

127 x 58 x 140

Volts Max Airflow Dimensions (V) (CFM) L x W x H (mm)

Description

Colour

53145

Ultimate

White

200

127 x 58 x 140

53147

Ultimate

Black

200

127 x 58 x 140

• Ultra quite 2 speed fan with a tilting head. • FingerSafe™ blade that has a shock-absorbing leading edge that flexes when it is stopped. • Long life motor that draws 0.5 amps at high speed. • Screw down mount. • RCM Certified to Australian Standards.

Lighting & Electrical

• Powered by lighter plug. • Ultra quite 2 speed fan with a tilting head. • FingerSafe™ blade that has a shock-absorbing leading edge that flexes when it is stopped. • Long life motor that draws 0.5 amps at high speed. • 2 mounting options, suction cap or screw down. • Optional suction cap mount included. • RCM Certified to Australian Standards.

Part No.

FingerSafe blade FingerSafe blade

Suction Mount

Lighter Plug

2 speed rocker switch

Easy screw down mounting system

Fan Blades - Blade Replacement Part No.

Description

Colour

Suits

53168

Replacement Fan Blade

White

Sirocco II

53170

Replacement Fan Blade

Black

Sirocco II

53172

Replacement Fan Blade

White

Ultimate Fan

www.samallen.com.au

398

Blowers

Inline Blowers & Ventilation Hose Blowers - Inline Amp Fuse Part No. Description Volts (V) (A) (A)

Blowers - Inline - Shurflo® Hose Size (mm)

CFM

Dimensions W x L x D (mm)

Part No. Description Volts (V)

Amp (A)

CFM

Hose Size (mm)

Dimensions W x L x D (mm)

39320

Inline

2.5

130

135 x 210 x 110

39653

Inline

3.8

120

140 x 130 x 96

39321

Inline

1.5

122

135 x 210 x 110

39654

Inline

5.5

220

102

162 x 130 x 122

• Ventilation for engine compartments, bilges, galleys and head closets. • 6 Blade nylon fan in a heavy duty housing. • Compact design with extended barbs for ease of installation. • Sealed motor, shaft and wires for corrosion resistance and long life. • CE Certified, Ignition Protected ISO 9097 continuous duty. • RCM Certified to Australian Standards.

39322

Inline

230

102

152 x 206 x 130

39323

Inline

230

102

152 x 206 x 130

• Provides ventilation for engine compartment, bilge and marine head closets. • Rigid ABS plastic housing. • 4-blade fan generates optimum exhaust capacity. • Built-in mounting feet allow horizontal or vertical installation. • CE Certified, Ignition Protected ISO 8846.

Blower - Centrifugal - Ocean Technologies Blowers - Inline - Ocean Technologies Part No.

Mount Type

Volts Amp m³p/h / CFM Inlet Outlet Dimensions (V) (A) (mm) (mm) L x Ø (mm)

39726

Bulkhead

3.9

750 / 441

178 178

235 x 195

39728

Bulkhead

2.5

750 / 441

178 178

235 x 195

39730

Flexible

750 / 441

188 178

160 x 195

39731

Flexible

750 / 441

188 178

160 x 195

Lighting & Electrical

• Laguna Marine Inline Blowers utilise advanced fan blade design technologies suitable for bulkhead mounting or flexible installation. • Industry leading input to output ratio. • Quiet operation. • Low current draw. • Duty cycle 6 hours max. on, 30 mins off cool down. • CE Certified, Ignition Protected ISO 8846, EN 55014.

39726 / 39728

Part No.

Mount Type

Volts Amp (V) (A)

m³p/h / CFM

Inlet Outlet (mm) (mm)

Dimensions (mm)

39700

Flange

39702

Flange

39704

Flange

39706

Flange

550 / 324 102 102 290 x 257 x 150

39708

Flange

750 / 441 152 102 290 x 257 x 150

39710

Flange

750 / 441 152 102 290 x 257 x 150

39712

Flange

16 1000 / 589 152 102 290 x 257 x 180

39714

Flexible

11.5 550 / 324 102 102 290 x 257 x 150

39716

Flexible

3.9 280 / 163

72 200 x 165 x 195

2.5 280 / 163

72 200 x 165 x 195

11.5 550 / 324 102 102 290 x 257 x 150

550 / 324 102 102 290 x 257 x 150

39718

Flexible

750 / 441 152 102 290 x 257 x 150

39720

Flexible

750 / 441 152 102 290 x 257 x 150

39722

Flexible

16 1000 / 589 152 102 290 x 257 x 180

• Centrifugal Blowers come in Flange or Flex mounting, ranging from 163 to 589 cubic feet per minute designed for ventilating engine compartments, bilges, galleys and head closets. • Made from fibreglass with stainless steel screws and shaft. • Duty cycle 6 hours max. on, 30 mins off cool down. • Low current draw. • CE Certified, Ignition Protected ISO 8846, complying with ISO 8849, EN 55014, ISO 10133. Flange Mounting

Flex Mounting

39730 / 39731

Blowers - Centrifugal Volts Amp Fuse m³p/h / Inlet Outlet Part No. Mount Type (V) (A) (A) CFM (mm) (mm)

39542 Flange 12

150 / 90 76

Dimensions (mm)

76 195 x 160 x 145

• The TMC Flange Mount Blower is designed to remove flammable fuel vapours from below deck for ventilating engine compartments, bilges, galleys and head closets. • Spark proof. • Maximum air flow 90 CFM. • 76mm (3") intake tail. • Mounting bracket included. • CE Certified, Ignition Protected ISO 8846.

399

39700 - 39712 39714 - 39722

Hose - Ventilation Ducting • Suitable for venting bilge gases or Part No. general airflow. • Flame resistant flexible PVC ducting. 765000 • UV resistant. 765002 • Wire Reinforced. 765004

Dia. (mm)

765006

www.samallen.com.au

Length (m)

Colour

White

102

White

102

White

Switches

Isolator Switches Battery Switch - 2 Position - Surface Mount Part No. Function

Mount Style

Volts (V)

Maximum Continuous Load (Amp)

Dimensions LxWxD (mm)

530781

Surface 12-48

275 @ 12V

68 x 68 x 75

75mm

68mm

68mm 55mm

• 2 position - On / Off. • Features brass terminals and heavy-duty plastic construction. • Ideal for marine and automotive applications. • M10 stud size. • Removable knob (turn knob left from OFF position). • Removable side panels for unobstructed wiring. • Load rating @12V: 275A maximum continuous. 450A intermittent (5 min). 1250A for 10 seconds. DO NOT TURN THE SWITCH OFF WHILE THE • Mounting hardware included. ENGINE IS RUNNING • CE certified.

Ø 5mm

Removable actuator

Removable panels

Battery Switch - 2 Position- HD - Surface Mount Functions Mount Style

Max. Volts (V)

Maximum Continuous Load (Amp)

Dimensions LxWxD (mm)

530787

Surface

275 @ 12V 69 x 69 x 74

530792

Surface

275 @ 12V 69 x 69 x 74

530791

Emergency Parallel Yellow Actuator Knob suits 530787

• 2 position switch - On / Off. • Features brass terminals and glass fibre reinforced nylon enclosure. • Ignition protection. • 14mm M10 studs. • Removable actuator (turn actuator to remove position). • Removable side panels for unobstructed wiring. • Load rating @12V: 275A maximum continuous. 455A intermittent (5 min). 1250A for 10 seconds. DO NOT TURN THE • Mounting hardware included. SWITCH OFF WHILE THE • 16 piece label set included. ENGINE IS RUNNING • CE certified.

530787 16 piece label set 530792 530791 69mm 54.80mm

69mm

Ø 5mm

Removable actuator

Battery Switch - 4 Position - Surface Mount Part No.

Maximum Continuous Load (Amp)

Dimensions L x W x D (mm)

Part No.

Surface 12-48

200 @ 12V

68 x 68 x 75

530788

• 4 positions - Battery 1 and 2, Battery 1, Battery 2, Off. • Features brass terminals and heavy-duty plastic construction. • Ideal for marine and automotive applications. • M8 stud size. • Removable side panels for unobstructed wiring. • Load rating @12V: 200A maximum continuous. 350A intermittent (5 min). DO NOT TURN THE 800A for 10 seconds. SWITCH OFF WHILE THE • Mounting hardware included. ENGINE IS RUNNING • CE certified. 68mm 55mm

69mm 55mm

Panel

Volts (V)

Maximum Continuous Load (Amp)

Dimensions L x W x D (mm)

12-48

200 @ 12V

69 x 69 x 67

67mm

69mm

68mm

Ø 5mm

69mm 55mm

75mm

67mm

69mm

68mm

Ø 5mm

Function Mount Style

• 4 positions - Battery 1 and 2, Battery 1, Battery 2, Off. • Features brass terminals and heavy-duty plastic construction. • Ideal for marine and automotive applications. • M8 stud size. • Removable side panels for unobstructed wiring. DELETED • Load rating @12V: 200A maximum continuous. 350A intermittent (5 min). DO NOT TURN THE 800A for 10 seconds. SWITCH OFF WHILE THE • Mounting hardware included. ENGINE IS RUNNING • CE certified.

75mm

Ø 5mm

68mm 55mm

Removable panels

Battery Switch - 4 Position - Panel Mount

Volts (V)

Function Mount Style

530786

74mm

Lighting & Electrical

Part No.

Removable panels

Ø 5mm

www.samallen.com.au

400

Isolator Switches & Voltage Sensitive Relay Battery Switch - 4 Position - HD - Semi Recessed

Voltage Sensitive Relay - Surface Mount Part No.

Description

Volts (V)

Maximum Continuous Dimensions Load (Amp) L x W x D (mm)

53083

Voltage Sensitive Relay

125 @ 12V 69 x 69 x 58

Functions

Mount Style

Max. Volts (V)

Maximum Continuous Load (Amp)

Dimensions Ø x D (mm)

23119

Surface

310 @ 12V

160 x 72

• 4 positions - Battery 1 and 2 Battery 1 Battery 2 Off • Features brass terminals and heavy-duty plastic construction. • Ideal for marine and automotive applications. • Click stop to all positions. • Vapour proof and ignition protected. • 13mm M10 stud size. • Load rating @12V: • 310A maximum continuous. 500A intermittent (5 min). DO NOT TURN THE

SWITCH OFF WHILE THE ENGINE IS RUNNING 160mm 103mm

70mm

58mm

69mm

• Ideal for dual battery systems or to switch high current appliances. • Suits ATV, boats, RV’s, caravans and trucks. • VSR allows 2 batteries to be charged at the same time, once start battery reaches cut-in voltage. • No voltage drops compared to battery isolator diodes (0.6V). • Robust glass fibre reinforced nylon enclosure. • M6 stud size. • Built-in LED indication (ON when VSR engages). • Rated protection: IP67. • Surface or panel mount options provide flexibility when installing. • Load rating @12V: 125A maximum continuous. 140A intermittent. • Cut-in: 13.3V / Cut out: 12.8V. • Power consumption: 0mA (storage). 10mA (standby). 330mA (engage). 69mm • Ignition protection. • Mounting hardware included. • CE certified.

Part No.

160mm 103mm

70mm

Ø 5mm 69mm

58mm

69mm

Battery Switch - 4 Position - Dual Battery

Ø 5mm

Lighting & Electrical

Battery Switch - 2 Position - Panel Mount Part No.

Functions

Mount Style

Volts (V)

Maximum Dimensions Continuous Load (Amp) L x W x D (mm)

530782

Panel Mount

12-48

275 @ 12V

69 x 69 x 67

• 2 position - On / Off. • Features brass terminals and heavy-duty plastic construction. • Ideal for marine and automotive applications. • M10 stud size. • Removable knob (turn knob left from OFF position). • Load rating @12V: 275A maximum continuous. 450A intermittent (5 min). 1250A for 10 seconds. DO NOT TURN THE • Mounting hardware included. SWITCH OFF WHILE THE • CE certified. ENGINE IS RUNNING 69mm 55mm

Part No. Functions

Mount Style

Max. Volts (V)

Maximum Continuous Load (Amp)

23122

Surface

175 @ 12V 135 x 135 x 75

Dimensions L x W x D (mm)

• 4 positions - Battery 1 and 2 Battery 1 Battery 2 Off • Features brass terminals and heavy-duty plastic construction. • Ideal for marine and automotive applications. • Allows the use of 2 batteries with a single pole, triple-throw rotary switch. • Click stop to all positions. • Locking button stops knob from turning. • Vapour proof and ignition protected. • 14mm M10 stud size. • Load rating @12V: 175A @ 12V maximum continuous. 300A @ 12V intermittent (5 min). • CE certified.

DO NOT TURN THE SWITCH OFF WHILE THE ENGINE IS RUNNING 135mm 110mm

67mm

75mm

69mm

Ø 5mm 67mm

69mm 55mm

135mm 110mm

75mm

69mm

Removable actuator

401

Locking button Ø 5mm

www.samallen.com.au

Isolator Switches Battery Switch - 2 Position - Isolation

Battery Switch - 4 Position - Dual Battery

Semi Recessed 12-24 240 @ 12V 90 x 90 x 65 56 x 58

• Dual pole. DO NOT TURN THE • Ideal for commercial vessels. SWITCH OFF WHILE THE ENGINE IS RUNNING • 3 position - Battery 1 on Battery 2 on Off • Designed as a master disconnect switch. • M10 stud size. • Load rating @12V: • 240A @ 12V maximum continuous. • Removable key (turn key to nominated off position). • Weather proof cap when the key is removed.

Part No. Functions Mount Style

23128

Semi Recessed 12-24 300 @12V

39mm

42mm

150mm

5.5

LED light Illuminates key

55mm

20mm

Removable key

34mm

42mm

85mm

LED light

Battery Switch - 2 Position - Mini 150mm

55mm

75mm

55mm

Part No. Removable key

Battery Isolator Switch Volts (V)

Description

Cut Out Dimensions Overall Size W x L (mm) � x D (mm)

Battery Isolator Switch - 2 Position - Mini

23125

Battery Isolator Switch 12 with Key Battery Isolator Switch 12/24 with Key and Cover

Dimensions Cut Out Terminal Max. Continuous Intermittent Part No. Volts Rating ØxD (V) Rating (A) (3 Mins) Ø (mm) Studs (A) (mm)

23124A

Replacement Red Key to suit 23124

23125A

Replacement Red Key to suit 23125

23124

56mm

530780 DC 32

100

150

45 x 55

M6 x 2

• 2 position switch: On / Off. • Brass terminals. • Heavy duty plastic construction. • Removable knob: Turn knob to out position to remove. • Ideal for marine and automotive applications. • Operating Temperature: -20°C ~ +50°C. • CE certified. DO NOT TURN THE SWITCH OFF WHILE THE ENGINE IS RUNNING

45mm

55mm

36mm 19mm

56 x 91

23 x 53

57 x 98

Switch Kits Volts (V)

Cut Out Dimensions Overall Size Ø x D (mm) � x D (mm)

Part No.

Description

Colour

28526

Switch Kit

Chrome 12/24

70 x 110

28529

Switch Kit

White

12/24

78 x 110

98 x 110

28531

Switch Kit

White

12/24

81 x 95

114 x 95

28533 28527

DO NOT TURN THE 81 x 95 114 x 95 SWITCH OFF WHILE THE ENGINE IS RUNNING Battery Isolator Switch Box White Round

28540

Battery Isolator Switch Box Chrome Round

28531A

Replacement Red Key to suit 28531 and 28533

Switch Kit

Black

98 x 110

12/24

• 2 position - On / Off. • Ignition protection. • M10 stud size. • Removable key (turn key to off to remove). • Load rating @12V: 300A maximum continuous. 800A for 5 seconds. • CE certified.

23124/23125

45mm

55mm

23 x 53

Lighting & Electrical

75mm 55mm

DO NOT TURN THE SWITCH OFF WHILE THE ENGINE IS RUNNING

20mm

36mm

85mm

60mm 4x

90mm

60 x 102 55 x 23

60mm 5.5

34mm

56mm

• 2 position switch - On / Off. • Ignition protection. • Red LED indication. • 39mm protrusion without key. • 20mm M10 stud size. • Removable key (turn key to off to remove). • Rated protection: IP66. • Load rating @12V: 300A maximum continuous. 1000A for 5 seconds.

90mm

Maximum Dimensions Cut Out Continuous Intrusion Key L x W (mm) �with Load (Amp) x D (mm) (mm)

Volts (V)

27mm

Dimensions Cut Out L x W x D L x D (mm) (mm)

39mm

Maximum Continuous Load (Amp)

36mm

23126

Volts (V)

27mm

Mount Style

Part No. Functions

36mm 19mm Removable actuator Removable key 28526

www.samallen.com.au

28529

28531

28533

402

Push Button Switch Panels Push Button Switch Panels - Carbon Fiber Vinyl with S/S Bezel Part No.

LED Backlight Colour

Faceplate

530694

Red

530696

Blue

Plastic with Carbon Fiber Vinyl Film Plastic with Carbon Fiber Vinyl Film

Outer Frame

Switch Rating

Panel Rating Max. Amps (A)

Panel Depth (mm)

Dimensions W x H (mm)

Cut-Out W x H (mm)

S/S

20A @ DC 12V

105

64 x 169

32 x 150

S/S

20A @ DC 12V

105

64 x 169

32 x 150

• Carbon finish vinyl face plate with vivid 3D texture. • Removable stainless steel cover. • Durable CNC 316G stainless steel switch with polycarbonate face. • Market leading 20A capability switches - No more relays. • Prewired with 600mm tinned wire for easy installation. • Rubber silicon gasket. • Operating temperature - 20°C - +55°C. • Prewired with 600mm tinned wire for easy installation. • 40pc labelling stickers included. • IP66 rated. Kit Includes:

• 1 x Panel. • 6 x 20A switches. • 1 x Sticker pack. • 1 x Rubber silicon gasket. • 6 x Stainless steel screws. • 6 x Red eye terminals.

Lighting & Electrical 403

169.0mm

64.0mm

Leave the stainless steel cover off for a black finish to the switch.

Pre-wired with 600mm of tinned copper wire

Photo courtesy of Cruise Craft Boats

www.samallen.com.au

35.0mm

Push Button Switches Relaxn 20A Push Button Switches - Stainless Steel Part No.

Switch Facial Material

Volts (V)

Switch Function

Amps Cut Out Dimensions (A) Ø (mm) Ø x D (mm)

Description

LED

530721

Push Button

Blue

Stainless Steel

On/Off

22 x 37

530723

Push Button

Red

Stainless Steel

On/Off

22 x 37

530721M

Push Button

Blue

Stainless Steel

(On)/Off - (Momentary)

22 x 37

530723M

Push Button

Red

Stainless Steel

(On)/Off - (Momentary)

22 x 37

530728

Wiring Harness - Suits 530721, 530723, 530721M & 530723M

• Market leading 20A capability - No more relays. • 316G stainless steel switch and face, blue/red LED backlight ring. • Available in On/Off or (On)/Off - momentary. • LED light is configurable to be pushed on illuminated or always on. • 0.250" quick connect terminals. • Up to 20,000 cycles. • Operating temperature - 20°C - +55°C. • IP67 rated. • Wiring harness - 140mm tinned for easy installation.

530721* / 530721M

530723 / 530723M

Wiring Diagram 1. Independent LED (always ON)

2. ON-Indica�on LED (ON when bu�on is pressed) Harness pre-linked for this setup.

From DC (+)

Power On

10.2

LED (+) LED Jumper To Device

To Device

Power On

From DC (+) LED (–)

Power Off

LED (–)

Power Off

M19xP1.0

Use included heat shrink tube to cover LED(+) when jumper is used

530728

Part No.

Description

LED

Switch Facial Material

Switch

Amps (A)

Volts Cut Out Dimensions (V) Ø (mm) Ø x D (mm)

530724

Push Button

Blue

Stainless Steel

On/Off

22 x 37

530725

Push Button

Red

Polycarbonate

On/Off

22 x 37

530726

Switch - Labelling Stickers to suit 530725

530729

Switch - Labelling Stickers (Updated Version) to suit 530725

• Market leading 20A capability - No more relays. • 316G stainless steel switch with stainless steel face (blue) or polycarbonate face (red). • 0.250" quick connect terminals. • LED light is configurable to be pushed on illuminated or always on. • Up to 20,000 cycles. • Operating temperature - 20°C - +55°C. • IP67 rated. • Pre-wired 500mm tinned for easy installation. Anchor light

Nav light

Lighting & Electrical

Relaxn 20A Push Button Switches - Stainless Steel - Pre-Wired

530724

Power Off

Power On Scan to see in use video!

Cockpit lights

Gunwale lights

530725

Fresh water

Transom light

Deck wash

530726

Kill tanks

Power Off

Power On

Label On

530729

www.samallen.com.au

404

Push Button, Dimmer & Membrane Panel Switches 5A Push Button Switches - Stainless Steel Part No.

LED LED Function

Switch Function

Volts Amps Cut Out Dimensions (V) (A) Ø (mm) Ø x D (mm)

Back (On)/Off 530722 Blue Lighting (Momentary) 12

22 x 40

530731 Wiring Harness - Suits 530722 • Durable stainless steel housing and button face. • Momentary switch. • Blue LED light ring. • Up to 50,000 cycles. • Operating temperature - 20°C - +55°C. • IP67 rated. NOTE:(On) = Momentary switch. 530731

Part No.

Switch Function

Volts (V)

Amp Cut-Out Dimensions (A) Ø x D (mm) Ø x D (mm)

530727

On/Off/Dim

12~30 1.5

19 x 20

22 x 20

Pre-wired

21.80

Touch LED Digital Dimmer Switch - S/S - 2 Colours

4.90

M19P1.0

Off

NC NO

10% 100% Dimming switch changes hue depending on the brightness setting

4.90

Switch - Membrane Switch Panel - with Bluetooth 3.50 9.20 530691

Volts

Max Amps (A)

Panel WxH (mm)

Cut-out � (mm)

Control Box L x W x H (mm)

12-30

91 x 75

136 x 90 x 32

20 1.5

53064 20 Amp Relay Booster Kit suits Membrane Panels

Lighting & Electrical

• This membrane panel series just got better with mobile app control connectivity. • Each switch on the control panel can be programmed as either a momentary switch or a standard on/off switch. • Ultra-compact panel design. • Control box can be installed in any dry location. • LED indicators with 10A PPTC protection. • Backlighting for enhanced visibility. • Quick-connect terminals on the control box. • IP67 rated for water and dust resistance. • Includes 60pc assorted label set. • Mounting hardware and 1m micro-USB cable included. • The mobile app includes features such as customizable labels, momentary buttons, various button styles and backgrounds, system voltage monitoring, low voltage warnings, and more. Available on both the Google Play Store (Android) and Apple App Store (iOS). NOTE: Control box needs to be installed in a dry area.

300

Switch Part No. Positions

M19xP1.0

LOAD

Switch - Membrane Switch Panel Switch Part No. Positions

Volts

Max Amps (A)

Panel WxH (mm)

Cut-out � (mm)

Control Box L x W x H (mm)

530692

12/24

130 x 75

214 x 95 x 29

10P

53064 20 Amp Relay Booster Kit suits Membrane Panels • Each switch on the control panel can be programmed as either a momentary switch or a standard on/off switch. • Ultra-compact panel design. • Control box can be installed in any dry location. • LED indicators with 10A PPTC protection. • Backlighting for enhanced visibility. • Quick-connect terminals on the control box. • IP67 rated for water and dust resistance. • Includes 60pc assorted label set. • Mounting hardware and 1m micro-USB cable included. NOTE: Control box needs to be installed in a dry area.

75mm

91mm

New designed connection to take up less installation room

405

New designed control panel with heavy-duty adhesive

www.samallen.com.au

75mm

130mm

New designed connection to take up less installation room

New designed control panel with heavy-duty adhesive

Switches Panels Switch Panels - Splashproof S/S Push Button Part No.

530711 530713

Volts (V)

Description

Switch Panel Relaxn Push Button S/S 5 Gang with Dual USB & LED Indicators Switch Panel Relaxn Push Button S/S 6 Gang & LED Indicators

Cut Out Dimensions W x H (mm) W x H (mm)

12/24

86 x 86

110 x 100

12/24

86 x 86

110 x 100

• Rubber gasket prevents water ingress behind the switch panel. • 530711 - 5 Gang with dual USB-A (5V 3A)/USB-C (PD 60W Max) charger. • LED switch indication when device is turned on. • 20A per branch (2 switches / power outlet) requires 20A fuse. • ATP Fuses (3 x 15A Fuses Included). • Pre-wired for easy installation. • Protection Rating: IP65. • 28 label stickers included. • Installation screws included.

530713

28 assorted label stickers

530711

Switch - Water Resistant Panels Description

Volts (V)

Cut Out Dimensions W x H (mm) W x H (mm)

530714

5 Switch with Dual USB Charger 12/24 (USB A & USB C)

87 x 78

107 x 96

530716

6 Switch Panel

87 x 78

107 x 96

12/24

• Toggle switches, with waterproof rubber boots Rated 15A @ 12V/10A @ 24V. • Rubber gasket prevents water ingress behind the switch panel. • LED panel indication when device is turned on. • 3 x 15A fuses included protect each pair of switches Max rating 25A per branch. • Pre-wired for easy installation. • Protection Rating: IP66. • 28 label stickers included. • Black coated stainless steel screws included. ACCESSORY

AERATOR

ANCHOR LIGHT

AUTOPILOT

BAIT TANK PUMP

BILGE PUMP

BLOWER

CABIN LIGHTS

COCKPIT LIGHTS

DC OUTLETS

DECK WASH

DEPTH SOUNDER

WATER PUMP

FRIDGE

GPS

HORN

INSTER. LIGHTS

INSTRUMENTS

MACERTOR PUMP

NAV LIGHTS

RADAR

SPOTLIGHT

STEREO

STERN LIGHT

TRIM TABS

VHF

WINCH

WIPER

530714

530716

28 assorted label stickers

Switch & Alarm - Bilge Pump - Waterproof Part No.

Description

Switch Function

Volts (V)

Max Current (A)

Material

530771

Bilge Pump Switch Panel with Alarm

On/Off/(On)

Plastic (ASA)

• Modern design with visual and audible alarm. • Requires second float switch for high water alarm. • Pump activates automatically in auto mode when water reaches the lower float switch. • Alarm triggers when water reaches the upper float switch. • Pump activates if the lower float switch fails and water reaches the upper float switch. • Backlit label for easy recognition. • Three-position switch: Auto/Off/Manual. • Manual mode is momentary to prevent accidental prolonged operation. • Includes a 20-amp integral blade fuse.

Panel Face Cut Out Dimensions W x H (mm) W x H (mm)

36 x 100

54 x 114

Mounting Depth (mm)

Waterproof Siren

85dB

Lighting & Electrical

Part No.

ATP fuse included

www.samallen.com.au

406

Switches Panels Switch Panel - Deck Wash / Live Bait Part No.

Description

Deck Wash Control Panel Bait 530774L Live Control Panel 530774

Switch Volts Cut Out Dimensions Function (V) H x W (mm) H x W x D (mm)

Part No.

On/Off 12/24 105 x 45 114 x 75 x 54

Pump 53122 Bilge Switch Panel

On/Off 12/24 105 x 45 114 x 75 x 54

• 3 way switch on/off/auto. • Auto mode turns the bilge pump on or off as required.

• Modern design single gang switch panel. • Backlight label provides easy recognition at night. • 20A rated push reset circuit breaker. • Protection Rating: IP66. • CE certified.

530774

Switch - Bilge Pump Panel Switch Function

Description

Volts Cut Out Dimensions (V) W x H (mm) W x H (mm)

On/Off/Auto

70 x 30

90 x 50

DELETED

530774L 20A circuit breaker

Carling/Rocker Switches Switches - C7 Rocker - Waterproof Part No.

530730

Lighting & Electrical

530740

530732

530742

530734

530744

530750

530736

530746

530750 with cover

530738

530748

530751 with cover

DELETED

Description

Icon

Volts (V)

Switch

Dimensions WxHxD (mm)

530730 C7 Switch Wiper

On/Off/On 12/24 24 x 49 x 39

530732 C7 Switch Bilge

(On)/Off/On 12/24 24 x 49 x 39

Switch Deck 530734 C7 Wash

On/Off

12/24 24 x 49 x 39

530736 C7 Switch Live Bait

On/Off

12/24 24 x 49 x 39

Switch Anchor 530738 C7 Light

On/Off

12/24 24 x 49 x 39

Switch 530740 C7 Navigation Lights

On/Off

12/24 24 x 49 x 39

Switch Flood 530742 C7 Lights

On/Off

12/24 24 x 49 x 39

Switch Driving/ 530744 C7 Spot Light Switch 530746 C7 Blank Accessory

On/Off

12/24 24 x 49 x 39

On/Off

12/24 24 x 49 x 39

530748 C7 Switch Plain

Off/(On)

12/24 24 x 49 x 39

USB-A with 530750 Dual Cover USB-A / 530751 Dual USB-C with Cover

Tablet/Phone

Tablet/Phone 12/24 24 x 48 x 33

24 x 49 x 39

530758 Switch - Labelling Stickers • Red LED Illuminates when switch is on. • Protection Rating: IP68. • 530750 - Dual USB-A @ 2.4A & 1A. • 530751 - Dual USB-A @ 5V 2.4A / USB-C @ PW 18W. NOTE:* (On) = Momentary switch.

530758

Slides together to form custom switch panels: Mounting Panel Part No. 2 x Ends 53.3mm x 49.8mm

407

2 x Ends / 1 x Middle 80.2mm x 49.8mm

2 x Ends / 2 x Middle 107mm x 49.8mm

Description

Dimensions W x H (mm)

Panel Type

End

530754

Switch Mounting Panel

26.65 x 49.8

530756

Switch Mounting Panel

26.65 x 49.8 Middle

www.samallen.com.au

Carling/Rocker Switches Switches - C2 Rocker

Switches - C5 Rocker Switch

Volts (V)

Amps (A)

Dimensions WxHxD (mm)

On/Off

24 x 49 x 39

(On)/Off

24 x 49 x 39

On/Off/On

24 x 49 x 39

On/Off/(On)

24 x 49 x 39

(On)/Off/ (Off) (On)/Off/ (On)

24 x 49 x 39

On/Off/On

24 x 49 x 39

On/Off

Part No. Description

LED

Switch

Volts (V)

Amps (A)

Dimensions WxHxD (mm)

Part No. Description

85200 C2 Switch

On/Off

24 x 49 x 39

85500 C5 Switch

85205 C2 Switch

(On)/Off

24 x 49 x 39

85505 C5 Switch

85210 C2 Switch

On/Off/On

24 x 49 x 39

85510 C5 Switch

85215 C2 Switch

On/Off/(On)

24 x 49 x 39

85515 C5 Switch

(On)/Off/ (On)

24 x 49 x 39

85520 C5 Switch

On/Off

24 x 49 x 39

85245 C2 Switch Single On/Off/(On)

24 x 49 x 39

85250 C2 Switch Double On/Off/On

24 x 49 x 39

Switch 85524 C5 - 2 Pole Switch 85526 C5 - 2 Pole

85220 C2 Switch

85240 C2 Switch Single

• Red LED Illuminates when switch is on, on selected models. • 12V/20A. NOTE:* (On) = Momentary switch.

LED

85540 C5 Switch Single

24 x 49 x 39

85545 C5 Switch Single On/Off/(On)

24 x 49 x 39

85550 C5 Switch Double On/Off/On

24 x 49 x 39

• Red LED Illuminates when switch is on, on selected models. • 12V/20A. NOTE:* (On) = Momentary switch.

85200-85220 85240-85245

85250

85500-85526

85540/85545

85550

Switches - Panel Mounts Cut-Out Dimensions W x H (mm)

Description

85101

Switch Mount Panel

24 x 48

Single

85103

Switch Mount Panel

78 x 48

3 Gang

85105

Switch Mount Panel

156 x 48

6 Gang

85107

Switch Mount Panel

25 x 48

End

25 x 48

Middle

85109

Switch Mount Panel

85111

Blank Panel

85113

Foam Gasket

Panel Type

85101

85103

85107

85105

85111

85109

85113

Push/Pull, Ignition, Toggle & Safety Cut Off Switches Switch - Momentary Push Button Part No.

Description

Switch - Ignition

Volts (V)

Amps (A)

Cut Out Ø (mm)

30198

Push Button Switch with Black Rubber Boot

30199

Push Button Switch

30201

Push Button Switch with Red Rubber Boot

• Momentary (on)/off switch. • 12V/20A.

Part No.

Description

Lighting & Electrical

Part No.

Volts Cut Out Dimensions Intrusion (V) Ø (mm) Ø (mm) (mm)

4 Position Waterproof 530766 Momentary Ignition 12 Switch with Rubber Cover Position Momentary 53304 4 12 Ignition Switch

• All brass body construction. • Brass terminals and screws. • Includes 2 keys. • Can be mounted through a maximum 25mm dash.

30198 30199 530766 53304

30201

www.samallen.com.au

408

Push/Pull, Ignition, Toggle & Safety Cut Off Switches Switch - Push/Pull Part No.

Description

Volts (V)

Amps (A) @12V @24V

2 Position Push/ 12/24 Pull Switch

30204

Switch - Single & Double Pole Toggle

Cut Out Intrusion Ø (mm) (mm)

Volts (V)

Amps (A)

LED 530720 Illuminated Rocker Switch

85001

Rubber Boot

85010

On/Off

@12V

@24V

Overall Cut Out Ø (mm) WDimensions x H x D (mm)

16 x 29 x 57

85011

(On)/Off

16 x 29 x 57

85012

On/On

16 x 29 x 57

85013

On/Off/On

16 x 29 x 57

85014

On/Off/(On)

16 x 29 x 57

85015

(On)/Off/(On)

16 x 29 x 57

85020

On/Off

19 x 29 x 60

85021

(On)/Off

19 x 29 x 60

85022

On/On

19 x 29 x 60

Double Pole - G Series

Switch - Rocker - LED Description

Switch

Single Pole - F Series

• Chrome plated knobs. • 12V/20A or 24V/15A.

Part No.

Amps (A)

Part No.

Cut Out Dimensions Ø (mm) Ø x D (mm)

23 x 28

• 2 way switch on/off. • Illuminates when switch is on. • 12V/10A.

85023

On/Off/On

19 x 29 x 60

85024

On/Off/(On)

19 x 29 x 60

85025

(On)/Off/(On)

19 x 29 x 60

• 6.25mm push on terminal. NOTE: (On) = Momentary switch.

Double Pole - 85025

Single Pole - 85014

Switch - Toggle

Lighting & Electrical

Part No.

Description

Volts (V)

Amps (A)

53072

Toggle Switch

Cut Out Dimensions Ø (mm) L x W x D (mm)

28 x 11 x 55

• 2 way toggle switch on/off. • Rubber boot to cover toggle. • 12V/20A.

Switch - Push Button Part No.

Description

Volts (V)

Amps (A)

30307

Waterproof Push Button Switch

Description

Switch Emergency 50530 Ignition Cut-Out with Coiled Cord

30 x 40

Dash Thickness Shaft Ø Max. (mm) (mm)

16mm

Safety Cut Off Cord Volt (V)

Amp (A)

12V

• Ignition safety cut out switch with clip. • Coiled lanyard attaches to the driver. • When clip is detached from the switch, the engine will cut out.

409

• Waterproof compact button with rubber cap and chrome plated bezel and contacts. • Rated at 10 amps. • Can be mounted through a maximum 6mm dash. • Shaft stem diameter is 22mm.

Safety Cut Off Switch and Cord Part No.

Cut Out Dimensions Ø (mm) Ø x D (mm)

Part No.

50532

Description

Emergency Coil Cut Off Cord

• Universal set of kill switch clips and lanyard (7 different clips). • Suit most brands of outboards.

www.samallen.com.au

Winch Switches, Remotes, Solenoids & Connectors Solenoids - Heavy-Duty

Switch - Anchor Winch - Deck Part No.

30200 30202

Description

Volts (V)

Amps (A)

Flush Mount Anchor Winch Deck 12/24 Switch Surface Mount Anchor Winch Deck 12/24 Switch

Cut Out Dimensions Ø (mm) Ø (mm)

150

120

Type

Poles Volts (V)

Mounting Dimensions Hole Ø L x D x H (mm) (mm)

Watts (W)

542950 Reverse

500 - 1500

130 x 68 x 100

542952 Standard

500 - 1500

130 x 68 x 100

542954 Standard

500 - 1500

130 x 68 x 100

• Most commonly used for anchor winches. • Quick connect fittings. • Heavy-duty M8 primary connection posts. • Molded mounting bracket. • Replacement solenoid.

• Heavy-duty deck switch with waterproof deck mounting. • Rated at 150 amps continuous. • 6 x countersunk mounting holes. NOTE: 30202 sold as pairs and requires solenoids to work.

30202

Part No.

30200

Switch - Remote Control Units - Handheld

542950

Cable Dimensions Volts Amps Length (V) (A) (m) L x W x H (mm)

Part No.

Description

85950

2 Button Control Unit

85954

6 Button Control Unit

2.5 140 x 60 x 20

85961

2 Channel Radio Controller - 433Mhz

Electrical - Connectors - Nylon

145 x 50 x 22

• Designed for direct applications to command anchor winches, gangways etc. • IP56 rating with a rubber soft grip. • Casing made out of self extinguishing polyester resin.

542952/542954

Part No.

Description

30194

Nylon Waterproof Deck Connector Nylon Waterproof Deck Connector Nylon Waterproof Deck Connector Nylon Waterproof Deck Connector

30195 30196 30197

Pins

Type

Volts (V)

Amps (A)

Plug and Base

Plug

Plug and Base

Plug

30195

85961

30197

30194/30196

Electrical - Connectors - Chrome Plated Brass

85954

Part No.

Description

Pins

Volts (V)

Amps (A)

30208

Chrome Plated Brass Connector

12/24

30210

Chrome Plated Brass Connector

12/24

30211

Chrome plated Brass Connector

12/24

30209

Base and Cap to suit 30208

Lighting & Electrical

• Designed for applications up to 5 amps. 85950

• Chrome plated waterproof brass screw apart plug and socket. • Designed for applications up to 3 amps.

Electrical - Connectors - Economy 2 Pin Plug & Socket Part No.

Description

Pins

Volts (V)

Amps (A)

39561

Connector electrical economy 2 pin plug & socket

• Compact and economical design, suitable for a variety of applications. • Rated for currents up to 3 amps at 12 volts. 30208/30210/30211

www.samallen.com.au

30209

410

Connectors Anderson Plug Connectors Part No.

Description

53030

Anderson Plug Connectors

Thermo Merit/ Socket Splash Proof

Max. Rated Rated Voltage (V) Current (A) Sold As

600

Pairs

• Capable of handling high currents. • Made from robust and durable materials. • 8 B&S - 7.9mm2 size wire. • UL94 V-0 flammability rating.

Part No.

53050 53053

Amps (A)

Volts (V)

Description

Thermo Merit/ Socket Splash 12/24 Proof Chrome Brass Merit Socket 12/24 (Body Earthing)

@12V

@24V

• Glass fibre reinforced socket with a splash/dust proof cap. • Panel mounting with a back nut. • 6.4mm push on terminal. • 12V/15A and 24V/8A. • 25mm cutout hole required with a maximum dash thickness of 10mm.

Low Volt Plug & Socket Part No.

Description

Volts (V)

30217

Low Volt Extension Plug

30218 30219

Amps (A) @12V

@32V

12 - 32

Low Volt Socket

12 - 32

Low Volt Extension Socket

12 - 32

• Ideal for low voltage power supply applications. • Suits 2 core wire. • Uses a T style plug so there can be no confusion between a 240V plug.

30217

30219

53050

53053

Cigarette Lighter - Stainless Steel Part No.

Amps (A)

Volts (V)

Description

53022

Stainless Steel Cigarette Lighter Set

53020

Base Only

@12V

@24V

12/24

2.5

• Marine grade stainless steel. • Indicator Light. • 53020: Rated at 5 amps at 12V. Rated at 2.5 amps at 24V.

30218

Lighting & Electrical

Cigarette Extension Lead Part No.

Description

Volts (V)

53031

5 Meter Heavy-Duty Extension Lead

12/24

Amps (A) @12V

@24V

• Ideal for a large range of DIY projects from marine to camper trailer. • Male and female cigarette lighter plugs

Cigarette/ Merit Plug Part No.

Description

Volts (V)

53054

Multipurpose Cigarette/ Wella Merit Plug

12/24

Amps (A) @12V

@24V

• Fits all standard accessory sockets and merit sockets when red tip is removed. • Replaceable GBC fuses. • Bayonet-catch DIN to cigarette lighter plug adapter.

53022

53020

Electrical - Deutsch Plugs & Crimp Tool Part No.

Description

Mount Type

Amps (A)

721500

Deutsch Plug

DT2

721502

Deutsch Plug

DT3

721510

Deutsch Crimp Tool - Size 16

• Thermoplastic housing with a silicon rubber seal. • Thermoplastic wedgelock. • Contact size - 16. • Can withstand 50G shock. • Operating temperatures of -55°C - 125°C. • Protection Rating: IP68, IP6K9K. 721510

DT2 Kit (721500)

721500

DELETED

411

721502

www.samallen.com.au

DT3 Kit (721502)

Order Online or Download your Pricelist Today

Go to www.samallen.com.au

STEP 2 • Login with your customer number and password • Please contact SAW if you have not been issued a password and username. (Terms & Conditions Apply)

STEP 3 • From here, you can download your latest pricelist, view your cart, or retrieve past and existing orders OR • Search a product and add it to the shopping cart • Continue shopping or add known part numbers in the vacant field under 'PART NO.' CLICK ADD PRODUCT

Notes

Lighting & Electrical

STEP 1

412

Sockets & Chargers

Flush Mount Sockets & Chargers Relaxn Panel Flush Mount Series

Socket Model

• Flame retardant nylon glass fibre reinforced and UV stabilised panel. • Supplied with water-resistant rubber cap (IP65). • Short circuit / overheat protection. • 6.4mm quick connect terminals. • Socket Diameter Ø: 36.5mm. • Mounting hardware included.

Power Outlet Cigarette Lighter • Voltage Ratings: 20A @ 12V / 10A @ 24V. Dual USB Charger • Input Voltage: 12/24V • Compatible with all smartphones and devices that use a USB-A, USB-C or Dual USB-A/USBC charging port.

Single Panel Flush Mount (529990)

Voltmeter (530005 & 530007) • 3 digit blue LED display. • Push button switch to show or hide voltage. • Voltage can be read through transparent panel on rubber cap.

• Single panel mount (able to remove socket from panel to use in a flush mount round installation). • Mounting panel dimensions: W60 x H42.5 x D5.5mm. • Cut Out Ø: 29mm (per socket). • Mounting Hole Centres: W48mm.

Voltmeter (40040 & 53051) • Compact size. • Digital LED display (3 digits). • Self-powered from the measured DC voltage. • Floating decimal point for better resolution below 10V. • Reversed polarity input protection.

Dual Panel Flush Mount (529992) • Dual panel mount design. • Mounting panel dimensions: W105 x H42.5 x D5.5mm. • Cut Out: L82 x W37mm. • Mounting Hole Centres: W87mm.

Voltmeter - Battery Gauge Mini Round Digital

40040

DELETED

53048

Part No.

Socket

40040

Voltmeter

Model

DC V

Housing Volts Colour (V)

Current Consumption (mA)

Black 2.5-30

<30

53048 L Bracket - For 90° Installation

Socket - Single Panel - Power Outlet Cigarette Lighter Part No.

Socket

53044

Cig

Model

Lighting & Electrical

Housing Volts Colour (V)

Max Current

Black 12/24

12V-20A 24V-10A

Housing Volts Colour (V)

USB-A Charger Output

Black 12/24

5V 4.2A 2.1A+2.1A

Socket - Dual USB-A Charger Part No.

Socket

Model

53034

Dual USB-A

Socket - Single Panel - Dual USB Charger Dual USB-A Charger Part No.

Socket

Model

530000 Dual USB-A

Housing Volts Colour (V)

USB-A Charger Output

Black 12/24

5V 4.8A (2 x 2.4A)

Dual USB-A/USB-C Charger Part No.

Socket

530004

Dual USB-A/ USB-C

Model

Housing Volts Colour (V)

USB Charger Output USB-A

USB-C

Black 12/24 5V 3A

PD 60W (Max)

Socket - Single Panel - Voltmeter & Dual USB-A / USB-C Charger Part No.

413

Socket

Model

Dual 530005 Voltmeter USB-A/ USB-C

www.samallen.com.au

USB Charger Current Output Housing Volts Voltmeter Consumption Colour (V) (V) (mA) USB-A USB-C

Black 12/24

6-30

5V 3A

PD 30W (Max)

Flush Mount Sockets & Chargers Socket - Dual Panel - Cigarette Lighter

HARGE GC

Cig / Cig

53047

Model

Socket

Part No.

Housing Colour

Volts (V)

Max Current

Black

12/24 12V-20A 24V-10A

Socket - Dual Panel - Voltmeter & Cigarette Lighter Part No.

Socket

53051

Voltmeter / Cig

Model

DC V

Current Housing Volts Voltmeter Consumption Power Outlet Colour (V) (V) Max Current (mA)

Black 12/24

2.5-30

DELETED

12V-20A 24V-10A

<30

Socket - Dual Panel - Dual USB-A / USB-C Charger & Cigarette Lighter Part No.

Socket

530001

Dual USB-A/ USB-C / Cig

Model

Housing Volts Colour (V)

Black 12/24

USB Charger Output USB-A

USB-C

5V 3A

PD 60W (Max)

Power Outlet Max Current

12V-20A 24V-10A

Housing Volts Colour (V)

USB-A Charger Output

Power Outlet Max Current

530002 Dual USB-A / Cig

Black 12/24

5V 4.8A (2 x 2.4A)

12V-20A 24V-10A

530003 Dual USB-A / Cig

White 12/24

5V 4.8A (2 x 2.4A)

12V-20A 24V-10A

Part No.

Socket

Model

Socket - Dual Panel - Voltmeter & Dual USB-A Charger Part No.

Socket

/ Dual 530006 Voltmeter USB-A

Model

DC V

Current USB-A Charger Housing Volts Voltmeter Consumption Colour (V) (V) Output (mA)

Black 12/24

2.5-30

Lighting & Electrical

Socket - Dual Panel - Dual USB-A Charger & Cigarette Lighter

5V 4.8A (2 x 2.4A)

<30

Socket - Dual Panel - Voltmeter, Dual USB-A / USB-C Charger & Cigarette Lighter Part No.

Socket

530007

Voltmeter / Dual USB-A/USB-C / Cig

Model

Current Housing Volts Voltmeter Consumption Colour (V) (V) (mA)

USB Charger Output Power Outlet Max Current USB-A USB-C

Black 12/24

PD 5V 3A 30W (Max)

6-30

www.samallen.com.au

12V-20A 24V-10A

414

Surface Mount Sockets & Chargers Relaxn Surface Mount Series

Socket Model

Power Outlet Cigarette Lighter • Voltage Ratings: 20A @ 12V / 10A @ 24V.

Single Surface Mount

Dual USB Charger • Input Voltage: 12/24V • Compatible with all smartphones and devices that use a USB-A, USB-C or Dual USB-A/USBC charging port. Voltmeter • 3 digit blue LED display. • Push button switch to show or hide voltage. • Voltage can be read through transparent panel on rubber cap.

• Single surface mount. • Mounting panel dimensions: W55 x H48 x D80mm. • Mount with 8 gauge S/S screws included.

Dual Surface Mount • Dual surface mount design. • Mounting panel dimensions: W100 x H50 x D80mm. • Mount with 8 gauge S/S screws included.

Socket - Surface Mount - Blank Housing Housing Colour

Part No.

Description

Type

Model

529998

Power Socket Blank Housing

Single

Black

529999

Power Socket Blank Housing

Dual

Black

529999

529998

Socket - Single Surface Mount - Power Outlet Cigarette Lighter

53040

Cig

Model HARGE GC

Socket

Part No.

Housing Volts Colour (V)

Max Current

Black 12/24

12V-20A 24V-10A

Lighting & Electrical

Socket - Single Surface Mount - Dual USB Charger Dual USB-A/USB-C Charger Part No.

Socket

530008

Dual USB-A/ USB-C

530008

Model

Housing Volts Colour (V)

USB Charger Output USB-A

USB-C

Black 12/24 5V 3A

PD 60W (Max)

Dual USB-A Charger Part No.

Socket

Model

530010 Dual USB-A

Housing Volts Colour (V)

USB-A Charger Output

Black 12/24

5V 4.8A (2 x 2.4A)

530010

Socket - Single Surface Mount - Voltmeter & Dual USB-A / USB-C Charger Part No.

Socket

Model

Voltmeter / Dual 530009 USB-A/ USB-C 530009

415

www.samallen.com.au

USB Charger Output

Current Housing Volts Voltmeter Consumption Colour (V) (V) (mA)

USB-A

USB-C

Black 12/24

5V 3A

PD 30W (Max)

6-30

Surface Mount Sockets & Chargers Socket - Dual Surface Mount - Voltmeter, Dual USB-A / USB-C Charger & Cigarette Lighter Part No.

Socket

530011

Voltmeter / Dual USB-A/USB-C / Cig

USB Charger Current Output Housing Volts Voltmeter Consumption Power Outlet Colour (V) (V) Max Current (mA) USB-A USB-C

Model

Black 12/24

6-30

PD 5V 3A 30W (Max)

12V-20A 24V-10A

Socket - Dual Surface Mount - Dual USB-A Charger & Cigarette Lighter Housing Volts Colour (V)

USB-A Charger Output

Power Outlet Max Current

530012 Dual USB-A / Cig

Black 12/24

5V 4.8A (2 x 2.4A)

12V-20A 24V-10A

530013 Dual USB-A / Cig

White 12/24

5V 4.8A (2 x 2.4A)

12V-20A 24V-10A

Part No.

Socket

Model

Socket - Dual Surface Mount - Cigarette Lighter

HARGE GC

Black 12/24 12V-20A 24V-10A

White 12/24 12V-20A 24V-10A

Wireless Phone Chargers Charger - Wireless - Phone Holder Part No.

530014

Type

Volts (V)

IP Rating

Flush Mount Rotating 10-30 IP66 Bracket

Charger -Wireless - Phone Holder - Gimbal Mount

Mounting Holes Ø (mm)

Holder Dimensions HxWxD (mm)

124 x 84 x 46

• With both a stationary and adjustable arm, the phone can be secured or removed with one hand. • Accommodates most phone sizes. • Locking arms position the phone directly over the inductive charger to ensure a strong connection. • Arm shape, size, and colour designed to blend with any OEM dash setup. • Rotating feature allows the phone to be mounted vertically or horizontally depending on the user’s preference. • Charging Capacity: Wireless only - 10W. • Qi certified to meet all wireless charging standards. NOTE: Charging may stop temporarily to prevent overheating and damage to the phone.

Part No.

Type

Gimbal Mount 530015 Rotating Bracket

Volts (V)

Mounting Gimble IP Ø Mount Rating Holes Length (mm) (mm)

Holder Dimensions HxWxD (mm)

10-30

IP66

124 x 84 x 46

105

• Articulating arm provides additional flexibility by rotating in all directions • Positions the phone directly over the inductive charger to ensure a strong connection • Neutral design will not compete visually with other switches and gauge clusters on the dash. • Polycarbonate housing. • Charging available through wireless and through a USB-C connection through the bottom of the unit. • Rotating feature allows the phone to be mounted vertically or horizontally. • Qi certified to meet all wireless charging standards. NOTE: Charging may stop temporarily to prevent overheating and damage to the phone.

Scan to see in use video!

www.samallen.com.au

Lighting & Electrical

HARGE GC

Max Current

HARGE GC

Cig / Cig

53038

HARGE GC

Cig / Cig

53037

Housing Volts Colour (V)

Model

Socket

Part No.

416

Wireless Phone Chargers Charger - Wireless - Dock Part No.

Type

Volts (V)

530018 Surface Mount 10-30 Under 10-30 530020 Mount

Charger - Wireless - Max Megnetic

Charging Cut Out Dimensions IP Max. Capacity Rating Ø (mm) Ø (mm) (W)

Part No.

IP66

Magnetic 530022 Recessed 10-30 IP66 Mount

• The design of the inductive charger allows it to be incorporated into OEMs own visual brand language. • Surface or under mount options allow for installation into multiple applications. • Designed to charge and operate within the phone's thermal parameters. • Black polycarbonate housing and silicone rubber pad. • Up to 15W of charging capacity depending on phone limitations. • Qi certified to meet all wireless charging standards. NOTE: Charging may stop temporarily to prevent overheating and damage to the phone.

530018

Lighting & Electrical

Type

Charging Cut Out Dimensions IP Max. Capacity Ø ØxH Rating (W) (mm) (mm)

15**

61 x 71

• Shallow depth allows space for most phone cameras. • Small diameter, surface-mount design for versatile applications. • Magnet securely holds the phone in place while charging. • Meets all wireless charging safety standards . • Black polycarbonate housing. • Up to 15W of charging capacity depending on phone limitations. • A certified MagSafe charging case or ESR HaloLock case is recommended for best magnetic performance*. NOTE: Charging may stop temporarily to prevent overheating and damage to the phone. ** Dependent on phone requirements.

Volts (V)

IP Rating

Mount 530016 Flush Horizontal 10-30 IP65 Mount 10-30 IP66 530017 Flush Vertical

Charger - Wireless - Pocket - Slimline

Cut Out WxH (mm)

Dimensions WxHxD (mm)

203 x 95

233 x 114 x 114

108 x 130 140 x 152 x 106

• Recessed pocket protects the phone from the sun's harmful rays. • Capitalises on unused space, such as under furniture. • Designed to fit most phone sizes. • ABS housing and black polycarbonate bezel. • Up to 15W of charging capacity depending on phone limitations. • Qi certified to meet all wireless charging standards. NOTE: Charging may stop temporarily to prevent overheating and damage to the phone. 530017 - Requires 254mm vertical room behind panel. Designed for internal use only.

Part No.

Type

Volts (V)

Max. Out IP Charging Cut xH Rating Capacity W (mm) (W)

Flush Mount 530024 Horizontal 10-30 IP65 Slimline

15*

Dimensions WxHxD (mm)

102 x 132 x 61 x 142 41

• Subtly textured bezel hides scratches. • Raised silicone ridges secure phone in place. • Fast, efficient wireless charger. • Horizontal or vertical mounting. • ABS housing and black polycarbonate bezel. • Indicator light turns green when charging. NOTE: Charging may stop temporarily to prevent overheating and damage to the phone. Requires 254mm vertical room behind panel. Designed for internal use only. *Up to 15W max charging based on phone size and placement on the charging coils.

530016

530017

417

Volts (V)

530020

Charger - Wireless - Pocket Part No.

Type

www.samallen.com.au

Electrical Accessories

Terminal Studs

Terminal Studs - Bulkhead Connector - Insulated Max. Volts (V)

Colour Stud Size

721520 Negative

Black

721521 Positive

Red

721522 Negative

721523 Positive

Part No.

Type

Stud Intrusion Length (mm)

Dimensions WxHxD (mm)

5/16"

76 x 39 x 89

5/16"

76 x 39 x 89

Black

3/8"

76 x 39 x 89

Red

3/8"

76 x 39 x 89

• Provides a neat electrical through hull/wall wiring solution. • 250 amps. • Base made from glass fibre reinforced nylon for strength and durability.

721520

721521

Terminal Studs - Insulated Colour

Max. Volts (V)

Positive

Red

45 x 43 x 30

Negative

Black

45 x 43 x 30

Positive

Red

45 x 43 x 31

Single

Negative

Black

45 x 43 x 31

Single

Positive

Red

M10

50 x 50 x 36

Black

M10

50 x 50 x 36

Black

50 x 41 x 32

Part No.

Stud Type

Type

302219

Single

302220

Single

302222

Single

302223 302224 302225

Single

Negative

30220

Dual

Negative

Stud Size L xDimensions W x H (mm)

302201

Dual

Positive

Red

50 x 41 x 32

302209

Dual

Negative

Black

50 x 41 x 32

30221

Dual

Positive

Red

50 x 41 x 32

302220

302224

30220

30221

Lighting & Electrical

• Provides a neat electrical wiring solution. • Max amp per current is determined by wires connected. • Glass fibre reinforced nylon base.

Terminal Studs - HD Single - with PC Cover Part No.

Type

Max. Volts (V)

Colour

Stud Size

Dimensions (mm)

302300

Negative

Black

50 x 50 x 44

302301

Positive

Red

50 x 50 x 44

302304

Negative

Black

50 x 50 x 47

302305

Positive

Red

50 x 50 x 47

• Provides a neat electrical through hull/wall wiring solution. • Mounting hardware included. • Maximum amp, dependant on wire voltage connected (eg. M6: 12V-100A/48V-25A and M8: 12V-150A/48V-35A). • Polycarbonate base for increased heat resistance and durability

302300

302301

Terminal Studs - HD Dual - with PC Cover Part No.

Type

Max. Volts (V)

Colour

Stud Size

Dimensions (mm)

302308

Negative

Black

50 x 50 x 44

302309

Positive

Red

50 x 50 x 44

302312

Negative

Black

50 x 50 x 47

302313

Positive

Red

50 x 50 x 47

www.samallen.com.au

302308

302309

418

Bus Bars & Fuse Boxes Bus Bar with Cover - Insulated Part No.

Stud Type

302275

10 Way 2 Stud

Bus Bar with Cover - Heavy-Duty Modular

Max. Stud Max Size Amps (A) Volts (V)

Dimensions L x W x H (mm)

Part No.

1/4"

152 x 32 x 37

150

• Flame retardant ABS base for strength and durability. • Insulation cover. • Tin plated copper bus bar. • 15mm terminal stud length. • Stainless steel mounting hardware.

Stud Type

Max Amps (A)

Max. Volts (V)

Dimensions L x W x H (mm)

302277

6 Way 2 Stud

150

120 x 19 x 43

302278

12 Way 4 Stud

150

120 x 40 x 43

• Glass fibre reinforced nylon base ensures great mechanical strength and durability. • Nickel plated brass bus bar. • 15mm terminal stud length. • Mounting hardware included.

DELETED

Bus Bar - Heavy-Duty - Insulated Part No.

Stud Type

Max Amps (A)

Max. Volts (V)

302277

Dimensions L x W x H (mm)

302232

12 Way 2 Stud

100

206 x 43 x 32

302234

2 x 6 Way 4 Stud

100

118 x 43 x 32

302236

2 x 12 Way 4 Stud

100

178 x 43 x 32

• Glass fibre reinforced nylon base ensures great mechanical strength and durability. • Nickel plated brass Bus bar. • 20mm terminal stud length. DELETED • Stainless steel mounting hardware.

Bus Bar Box - Heavy-Duty Modular Part No.

Description

Lighting & Electrical

302236

Max Max. Dimensions Stud Amps Volts L x W x H (mm) Size (A) (V)

4 Way

100

48 138 x 69 x 44

M10 300

48 138 x 69 x 44

• Glass fibre reinforced nylon base and enclosure. • Removable of windows for unobstructed wiring. • Module box design for easy wiring. • Nickel plated brass bus material. • Terminal stud length: 302238 - 20mm 30223 - 18mm • Removable connecting link.

DELETED

Bus Bar - Heavy-Duty - Stepped - Insulated Part No.

Stud Type

Max Amps (A)

Max. Volts (V)

Dimensions L x W x H (mm)

302235

2 x 6 Way 4 Stud

150

94 x 75 x 40

• Glass fibre reinforced nylon base ensures great mechanical strength and durability. • Nickel plated brass bus bar. • 20mm and 25mm terminal stud length. • Stainless steel mounting hardware.

302238

DC GROUND PORT OUTBOARD ELECTRONICS DOMESTIC GND

Labels included

419

Stud Type

Bar 302238 Bus Modular Box 2 x 6 Way M6 30223 Bus Bar Box

302232

302278

www.samallen.com.au

30223

Fuse Boxes Fuse Box - ANL Part No.

Max Amps (A)

Description

720980 ANL Fuse Box

250

• Ideal for high current applications. • Clear cover for easy fuse inspection.

Fuse Box Part No.

Type

Max. Current (A)

302246

6 Circuit

302247

12 Circuit

30A max. per circuit 100A Total 30A max. per circuit 100A Total

Max. Volts (V)

Dimensions WxHxD (mm)

84 x 124 x 37.5

84 x 164 x 37.5

• Positive distribution bus with circuit protection, M5 common stud and M4 screw terminals. • Negative bus bar with M5 common stud and M4 screw terminals. • Cover for insulation, incorporating an easy to open push button latch providing access to fuses and storage for two spare fuses. • Nickel-plated copper buses and fuse clips. • Accepts ring or fork type terminals. • Accepts standard size blade fuses. • Built-in red LED illuminates to indicate a blown fuse for quick fault troubleshooting. • 80 piece sticker set and fasteners included. NOTE: Fuses sold separately.

302247 302246

Scan to see included stickers

Part No.

Type

302248

4 Circuits

Screw Terminals

43 x 92 x 32

302249

8 Circuits

Screw Terminals

43 x 146 x 32

Dimensions W x H x D (mm)

• Ignition protected when cover is secure –meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment. • Single side design allows wire entry from one side to minimize footprint. • Insulating cover meets ABYC/USCG insulation requirements. • Tin-plated copper buses and fuse clips. • Accepts ring or snap fork type terminals. • Includes 9 write-on labels for each circuit. • 100A total: 30A per branch. NOTE: Fuses sold separately.

302248

Lighting & Electrical

Fuse Box - Compact Max. Volts (V)

302249

Terminal Block Part No.

Description

Type

Maximum Voltage (V)

Amps (A)

302290

Terminal Block

300

302291

Terminal Block

300

• Independent source terminal. • Nylon and nickel plated brass. • M5 mounting screws • M4 terminal screws.

302291

www.samallen.com.au

302290

420

Terminals, Fuses & Fuse Holders Fuses - Blade

Fuses - Terminal Mount Fuse Holder & Fuses Part No.

Description

Max Voltage Amp Range Terminal Rating (V) Rating (A) Mount Size

Mount Fuse 720990 Terminal Holder

30-300

Part No.

3/8"

• Heavy-duty protection where space is important. • Fits any battery terminal that has a 3/8" post. • SAE J1171 compliant. Part No.

720992 720993

Description

Part No.

Colour

Amps (A)

100

Standard Fuses

72086E-10 25A Mini Fuse 72086F-10 30A Mini Fuse Maxi Fuses

72085C-10 15A Fuse

720972

20A Maxi Fuse

72085D-10 20A Fuse

720973

30A Maxi Fuse

72085E-10 25A Fuse

720974

40A Maxi Fuse

72085F-10 30A Fuse

720975

50A Maxi Fuse Blade 60A Maxi Fuse Blade 80A Maxi Fuse Blade 100A Maxi Fuse

150

• Designed for the most demanding environments providing high current protection in the tightest space constraints. • Suitable for main and auxiliary circuit protection such as alternator outputs, starter motor inputs and accessory circuits. • Breaking capacities meet the requirements of conventional batteries. • Full range circuit protection for automotive and marine applications. • Ignition protected. • Interrupt rating: 10,000A - 14V. • Clear housing for easy inspection. • UL-rated 94VO thermoplastic housing. • Fuses are colour coded for easy recognition. • SAE J1171 compliant and ISO 8820-6

Mini Fuses

720976

72086A-10 5A Mini Fuse 72086B-10 10A Mini Fuse

720977

72086C-10 15A Mini Fuse

720978

72086D-10 20A Mini Fuse

72085A

72085D

72085B

72085E

72085C

72085F

72086A

72086D

72086B

72086E

72086C

72086F

720972

720973

20mm

720974

720975

720976

720977

720978

Fuse Holders - Inline Part No.

41mm 21mm

Lighting & Electrical

30mm 62mm

720992

Description

72085A-10 5A Fuse 72085B-10 10A Fuse

Fuse Heavy Duty Bolt-In suit Battery Yellow Terminal Mount Fuse Heavy Duty Bolt-In suit Battery Orange Terminal Mount

720990

Description

72080

720993

Battery Terminal - Multi Connection Part No.

Description

Overall Dimensions L x W x H (mm)

23213

Multi Connection Battery Terminal Kit

74 x 40 x 19.4

72080

Waterproof Fuse Holder

72081

Waterproof Blade Fuse Holder

72083

Waterproof In Line Fuse Holder

72084

Standard Blade Fuse Holder

72087

Mini Blade Fuse Holder

720970

Fuse Holder Blade Maxi - 60A

720971

Fuse Holder Blade Maxi - 100A

72081

• Ideal for connecting multiple sources to power. • Compact design.

Description

72083

72084

720970

72087

720971

Fuses - ANL Part No.

421

Description

Amps (A)

Part No.

Description

Amps (A)

720982

Fuse ANL

720986

Fuse ANL

175

720983

Fuse ANL

100

720987

Fuse ANL

200

720984

Fuse ANL

125

720988

Fuse ANL

250

720985

Fuse ANL

150

www.samallen.com.au

Circuit Breakers, Battery Terminals & Battery Boxes Electrical - Thermal Circuit Breaker Part No. Amps (A)

Volts (V)

Mount Type

Terminal Studs

Dimensions (mm)

Battery Box - Large - Pre-Wired Mounting Screws

23663

Surface

302252

6 - 48 Surface

302254

6 - 48 Surface

302255

6 - 48 Surface

302266 100 6 - 48 Surface

1/4"-28 UNF 1/4"-28 UNF 1/4"-28 UNF 1/4"-28 UNF

48 x 74 x 45 M6-1/4" 48 x 74 x 45 M6-1/4" 48 x 74 x 45 M6-1/4" 48 x 74 x 45 M6-1/4"

Panel

302256

6 - 48

Panel

302260

6 - 48

Panel

302262 100 6 - 48

Panel

Part No.

1/4"-28 UNF 1/4"-28 UNF 1/4"-28 UNF

48 x 74 x 39 M6-1/4" 48 x 74 x 39 M6-1/4" 48 x 74 x 39 M6-1/4"

• IP67 rated, ideal for engine compartments and marine based applications. • High Amp thermal circuit breaker with manual reset. • If a fault is detected the unit will cut power immediately. • Operating temperature-32°C and 82°C. • Ignition protected. • Thermoset plastic housing.

Description

Outer Dimensions Inner Dimensions L x W x H (mm) L x W x H (mm)

Powered Battery Box 410 x 230 x 300 340 x 190 x 225

• Avoid being stranded with a flat battery, at the touch of a button the meter will indicate the batteries charge. • Convenient for all accessories such as coolers, vacuum cleaners, portable lights etc, plugs directly into the battery box. • No more replacing fuses or danger of overheating wires. • The accessory socket is connected to 10 amp circuit breaker that cuts out when overloaded, and reset by pressing a button. • No tools required when connecting or disconnecting the terminals. • External brass terminals for charging the battery. • Impact resistant polypropylene. • Carry handle to prevent contact with battery. • Adjustable strap to hold the lid down while being carried, or to secure it to a fixed location.

Panel Mount

Surface Mount

Battery charge meter

Battery Terminals

Cig socket

Adjustable strap

Battery Boxes

Part No.

Description

Material

Pack Qty

23215

Battery Terminals

Brass

Pair

23211

Battery Terminals

Zinc

Pair

23212

Battery Terminals

Lead

Pair

• Battery terminals are precision moulded providing a perfectly round contact area. • Coloured plastic wing nut terminals for easy recognition.

Brass

External brass terminals

Part No.

Description

Outer Dimensions Inner Dimensions L x W x H (mm) L x W x H (mm)

23661

Standard Battery Box 335 x 220 x 250 290 x 195 x 195

23662

Large Battery Box

23665

Extra Large Battery 450 x 215 x 225 385 x 180 x 195 Box Replacement Battery Strap suits Large & Extra Large Battery Box

23667

410 x 225 x 280 345 x 195 x 220

Lighting & Electrical

DELETED

• Vented battery box made from hi-density reinforced polyethylene which is impervious to battery acids. • Moulded carry handle. • Moulded lid to provide easy cable setup. • Includes webbing strap and stainless steel fastenings.

Zink

Lead

www.samallen.com.au

422

Battery Trays Battery Trays

Electrical Wiring & Accessories

Part No.

Size

Hole Outer Dimensions Inner Dimensions Mount Pattern L x W x H (mm) L x W (mm) A x B (mm)

23656

Small

327 x 190 x 241

265 x 174

293 x 100

23658

Large

365 x 190 x 285

302 x 174

330 x 100

Part No.

23659

X Large

406 x 203 x 285

350 x 190

373 x 100

47106

ABS Folding Antenna Bracket

Deck Mount

47108

Stainless Steel Folding Antenna Bracket

Deck Mount

47085

Stainless Steel 1" Tubing Antenna Bracket

47109

Nylon Ratchet Antenna Mount Knob

1" - 25mm OD Tube 22-25mm OD Rail

• Injection moulded plastic. • Deep edge around the base to firmly secure the battery. • Recessed 6mm mount holes. • Stainless steel rods. • Moulded locking teeth provide a tight rattle free lock, securing the lid over the battery.

Antenna Accessories & Braided Sleeves Antenna & Accessories Description

Suits

• Industry standard 1"- 14 TPI UNF threads.

Deep lip to secure battery

47085 47106

47109

47108

GPS Antenna Base with Locking Nut

Moulded locking teeth

Part No.

Height

Base Dia. Ø (mm)

47088

105

Inside Width Inside Height Dimensions (mm) Dimensions (mm)

Colour/Material

23116

White Polypropylene

160

150 to 205

23118

Stainless Steel

165 to 185

160 to 230

Mounting Screws (mm)

3 x Ø6 r/h

• Made from 316G stainless steel. • Industry standard 1"- 14 TPI UNF threads. • 70mm of thread for max adjustment. • Includes locking nut. • Perfectly paired with the Garmin MSC-10 heave and roll compensator GPS antenna.

Battery Holder - Tie Down - S/S & Polypropylene Part No.

Thread Length (mm)

Lighting & Electrical

Loom Tube Tool Part No.

721166

Description

Loom Tub Installation Tool

• Simple to use tool for loom tube applications. • Slide wire inside the Tube Tool's groove and move along the loom tube. 23116 23118

Battery Holder - Tie Down & Tray Part No.

Size

Dimensions L x W x H (mm)

23670

Small

280 x 175 x 220

23672

Large

320 x 180 x 230

• Heavy-duty reinforced plastic trays with stainless steel mounting screws.

423

Spiral Wraps Part No.

Description

Dia. Ø (mm)

Length (m)

721140

Spiral Wrap

721142

Spiral Wrap

721144

Spiral Wrap

• Designed for quick, neat, cost effective wire harnessing or where flexible protection is required for cable connections, such as between cabinets and instruments mounted on hinged cabinet doors. • Manufactured from black, flame retardant polypropylene, with a maximum operating temperature of 90°C.

www.samallen.com.au

Split Loom & Cable Glands Split Loom Tubing Dia. Ø (mm)

Length (m)

721150

Loom Tube

721151

Loom Tube

721145

Loom Tube

100

721152

Loom Tube

721153

Loom Tube

721146

Loom Tube

100

721154

Loom Tube

721155

Loom Tube

721147

Loom Tube

150

721156

Loom Tube

721157

Loom Tube

721148

Loom Tube

100

721158

Loom Tube

721159

Loom Tube

721149

Loom Tube

100

721160

Loom Tube

721161

Loom Tube

721163

Loom Tube

721165

Loom Tube

Max Cable Cut Out Dimensions OD Ø (mm) Ø x D (mm) (mm)

Part No.

Description

47022

Vertical Entry Cable Gland

25.4

48 x 14

47023

Side Entry Cable Gland

25.4

48 x 26

• Cable glands designed to seal cable routing through bulkheads. • Protects the cable while securing it firmly. • Polished 316G stainless steel cover. • Fibre reinforced nylon base. • Foam gasket. • Includes 3 glands: blank, 5mm and 8mm. • Mounting hardware supplied. • 47023 nylon hood is removable allowing cable to be easily passed through.

47022

47023

47022

Ø 14mm

Description

Ø 48mm

Part No.

Cable Gland - Stainless Steel

Lighting & Electrical

Ø 25.4mm

Ø 26mm

Ø 48mm

47023

Ø 25.4mm

Waterproof Cable Outlet

Cable Gland - Nylon

Part No.

Cable Size (mm)

Base � (mm)

Screw Mount (mm)

Part No.

Cable Size (mm)

47006

721330

4-5

47008

721331

5-10

47012

721332

10-14

47016

721333

13-18

47019

721334

18-25

• Ideal for passing cable through deck or the bulkhead. • Rubber ring forms a water tight seal. • Chrome plated brass.

Hole Cutout Size Bulkhead Thickness (mm) (mm)

• Ideal for passing cable through deck or the bulkhead. • Rubber ring forms a water tight seal.

www.samallen.com.au

424

Electrical Tap, Clips & Cable Ties P-Clips - Nylon

Tape - Self Amalgamating

Part No.

Bag Size

Suits Wire (mm)

Screw Mount (mm)

72500

100

3.2

72502

100

4.8

72504

100

6.7

72506

100

9.5

72508

100

12.7

72510

100

15.8

72512

100

19.4

72514

100

25.4

72516

100

31.8

Part No.

Description

Dimensions LxW

721136

Self Amalgamating Tape

9m x 19mm

• Suitable for Marine & High Voltage. • Water/Ozone/Oil resistant.

Cable Ties

P-Clips - Stainless Steel with Rubber Insert

Part No.

Description

Colour

Dimensions L x W (mm)

Pack Qty

Part No.

Pack Qty

Suits (mm)

Screw Mount (mm)

72090-100

Cable Ties

Black

100 x 2.5

100

72520

Single

72091-100

Cable Ties

Black

150 x 3.6

100

72521

Single

72092-100

Cable Ties

Black

203 x 4.6

100

72522

Single

72093-100

Cable Ties

Black

300 x 4.8

100

72523

Single

72094-100

Cable Ties

Black

368 x 4.8

100

72524

Single

72095-100

Cable Ties

Black

380 x 7.6

100

72526

Single

72527

Single

• 316G stainless steel, covered.

Tube Clips - Stainless Steel

Lighting & Electrical

Part No.

Bag Size

Type

Suits (mm)

Screw Mount (mm)

72518

Horizontal

Cable Ties - Screw Mount

• 304G stainless steel. Part No.

Description

Colour Dimensions L x W (mm)

Mount Hole (mm)

Pack Qty

72098

Cable Ties Screw Mount

Black 155 x 3.7

100

72099

Cable Ties Screw Mount

Black 204 x 4.2

100

Colour Dimensions L x W (mm)

Mount Hole (mm)

Pack Qty

Tape - Electrical Part No.

Description

Colour

Dimensions LxW

Pack Qty

721130

Electrical Tape

Black

20m x 18mm

721132

Electrical Tape

Red

20m x 18mm

Part No.

Description

721134

Electrical Tape

Assorted

20m x 18mm

35946-10

Cable Ties Multistrap

Black

300 x 10

4.5

35946-50

Cable Ties Multistrap

Black

300 x 10

4.5

Cable Ties - Multistrap

• Moulded from tough Nylon 6 for robust fixing. • The screw boss allows it to support up to 5kg when screwed to a bulkhead or the hull. • Eliminate the corrosion problems associated with pipe clamps and other similar fittings.

425

www.samallen.com.au

Heat Shrink & Battery Lugs Heat Shrink - Glue Lining

Cable Ties - Adhesive Mount Base Up To Pack Colour Suits (mm) Qty

Part No.

Qty Per Bag

Dia (mm)

Length (mm)

72088-20 Cable Ties Adhesive Mount Base

Black

4.7

721370

6.4

300

72089-20 Cable Ties Adhesive Mount Base

Black

5.0

721374

12.7

300

721376

300

Part No.

Description

• Ideal for electrical installations. • 2:1 shrink ratio.

Mounting Pad - Adhesive Part No.

302210

Description

Electrical Mounting Pad

Colour

Dimensions L x W x D (mm)

Black

300 x 50 x 20

• Ideal for attaching electrical items without the need of drilling mounting holes into your vessel or RV. • Cut from light HDPE sheet. • 3M VHB adhesive.

Heat Shrink Part No.

Colour

Diameter Length (mm) (m)

Size Suits Stud Pack Part No. B&S (mm) (mm) Qty

721188

721201

721189

721202

721206

720950

Red

721190

720951

Black

721194

721207

721208

• Highly conductive electro-tin plated copper.

720952

Red

721195

720953

Black

721196

721200

720954

Red

720955

Black

720956

Red

720957

Black

720958

Red

720959

Black

720960

Red

720961

Black

720962

Red

720963

Black

720964

Red

Part No.

Cable Size (mm)

Pack Qty

720965

Black

721210

6.6 - 10.5

721212

10.5 - 16.7

721214

16.7 - 27

• Ideal for electrical installations. • 2:1 shrink ratio.

Lighting & Electrical

Battery Cable Tube Lug

Battery Cable Crimp Link

www.samallen.com.au

426

Terminals Terminals - Female Blade

Terminals - Eye

Part No.

Blade Size (mm)

721000

2.5-3

721001

2.5-3

721002

Part No.

Ring ID Size (mm)

Cable Size (mm)

721056

100

721057

721058

2.5-3

721059

2.5-3

Cable Size Pack Qty (mm)

721003

100

721004

5-6

721005

5-6

721007

9.5

5-6

100

Terminals - Female Blade - Insulated Part No.

Blade Size (mm)

721009

2.5-3

100

721011

100

721017

9.5

5-6

Cable Size Pack Qty (mm)

Part No.

Ring ID Size (mm)

Cable Size (mm)

2.5-3

721068

2.5-3

100

721069

100

721070

5-6

100

721071

5-6

Pack Qty

721060

2.5-3

721072

721061

2.5-3

100

721073

100

721062

721074

5-6

721063

100

721075

5-6

721065

5-6

100

721076

9.5

5-6

721066

2.5-3

721077

9.5

5-6

721067

2.5-3

100

Terminals - Fork

Terminals - 2 Way - Male & Female Blade Part No.

Blade Size (mm)

721019

2.5-3

100

721020

721021

100

Cable Size Pack Qty (mm)

Lighting & Electrical

Terminals - Male Blade

Part No.

Fork ID Cable Size Size Pack Qty (mm) (mm)

721103

2.5-3

100

721104

721105

100

721107

2.5-3

100

721109

100

Part No.

Blade Size (mm)

721024

2.5-3

Part No.

Size (mm)

721025

2.5-3

100

721048

2.5-3

721026

721049

2.5-3

100

721027

100

721050

721029

5-6

100

721051

100

721052

5-6

721053

5-6

Cable Size Pack Qty (mm)

Terminals - Male Bullet Connectors Part No.

Bullet Size (mm)

721038

2.5-3

721039

2.5-3

100

721040

721041

100

Cable Size Pack Qty (mm)

Terminals - Female Bullet Connectors - Insulated

427

Pack Qty

Part No.

Bullet Size (mm)

721042

2.5-3

Cable Size Pack Qty (mm)

721043

2.5-3

100

721044

721045

100

www.samallen.com.au

Terminals - Butt Splice Cable Size Pack Qty (mm)

Waterproof Terminals, Wire Crimpers & Strippers Terminals - Female Blade - Waterproof

Terminals - Male Blade - Waterproof

Part No.

Blade Size (mm)

Cable Size (mm)

Pack Qty

Part No.

Blade Size (mm)

Cable Size (mm)

721012

2.5-3

721030

2.5-3

5-6

721014

721032

721016

5-6

721034

Pack Qty

• Adhesive heat shrink.

• Adhesive heat shrink. • Insulated.

Terminals - Butt Splice - Waterproof

Terminals - Eye - Waterproof

Cable Size (mm)

Part No.

Ring ID Size (mm)

Cable Size (mm)

Pack Qty

Part No.

721078

2.5-3

721120

2.5-3

100

Pack Qty

721080

721121

721082

2.5-3

721122

100

721084

721123

721086

5-6

721124

5-6

721125

5-6

100

721088

2.5-3

721090

721092

5-6

721094

721096

5-6

721098

5-6

• Adhesive heat shrink.

Wire Crimpers & Strippers Part No.

Cable Size (mm)

Description

721320

Wire Crimper & Stripper

0.5 - 6

721322

Wire Stripper/Cutter - Self Adjusting

0.5 - 6

721324

Wire Crimper Ratchet

0.5 - 6

• Suits 0.5 to 6mm wire

Terminals - Fork - Waterproof Part No.

Fork ID Size (mm)

Cable Size (mm)

Pack Qty

721110

2.5-3

721112

721114

2.5-3

721116

• Adhesive heat shrink.

Lighting & Electrical

• Adhesive heat shrink.

721320

721322

721324

www.samallen.com.au

428

Marine & Automotive Electrical Cables Cable - Single Core - Battery - Tinned Part No.

B&S Size

721234-30

721234-100

0.9

5.75

0.9

5.75

Red 8 B&S Tinned Battery Cable - 100m 30

103

1.1

7.2

Black 6 B&S Tinned Battery Cable - 100m

721237-30

721237-100

721236-100

103

1.1

7.2

Part No.

B&S Size

Length (m)

Nominal Area (mm2)

Insulation Thickness (mm)

Nominal O.D. (mm)

721400

1.0

10.1

721402

1.2

11.8

721404

1.2

13.1

721406

1.4

14.9

• Insulated with RoHS compliant V90 PVC. • Australian made.

Red 6 B&S Tinned Battery Cable - 100m

721238-50

168

1.1

10.2

Black 3 B&S Tinned Battery Cable - 30m

721239-50 721239-30

721236-30

721238-30

Amp Insulation Nominal Length Nominal Area Rating at Thickness O.D. (m) (mm2) 30°C (mm) (mm)

Black 8 B&S Tinned Battery Cable - 100m

721235-30 721235-100

Cable - Double Insulated - Tinned

168

1.1

10.2

Red 3 B&S Tinned Battery Cable - 30m

721240-30

188

1.7

10.3

721241-30

188

1.7

10.3

• Insulated with RoHS compliant V90 PVC.

Cable - Two Core - Twin Sheath - Tinned Part No.

Cable - Single Core - Tinned

Lighting & Electrical

Part No.

Wire Size (mm)

721246 721247 721260 721261 721250 721251 721252 721253 721262 721263 721254 721255 721256 721257

3 3 4 4 4 4 4 4 6 6 6 6 6 6

Amp Rating Insulation Length Nominal Area at Thickness (m) (mm2) 30°C (mm)

50 50 10 10 50 50 100 100 10 10 50 50 100 100

1.13 1.13 1.84 1.84 1.84 1.84 1.84 1.84 4.59 4.59 4.59 4.59 4.59 4.59

20 20 28 28 28 28 28 28 48 48 48 48 48 48

0.6 0.6 0.4 0.4 0.4 0.4 0.4 0.4 0.6 0.6 0.6 0.6 0.6 0.6

Nominal O.D. (mm)

2.2 2.2 2.6 2.6 2.6 2.6 2.6 2.6 4.0 4.0 4.0 4.0 4.0 4.0

0.56

0.4

3.1 x 4.9

721290

0.56

0.4

3.1 x 4.9

721302

1.13

0.4

2.6 x 5.9

721292

1.13

0.4

3.3 x 5.5

721293

100

1.13

0.4

3.3 x 5.5

721303

1.84

0.4

3.1 x 6.7

721294

1.84

0.4

3.8 x 6.3

721304

4.59

0.6

5.7 x 9.6

721296

4.59

0.6

5.7 x 9.6

721297

100

4.59

0.6

5.7 x 9.6

• Insulated with RoHS compliant V90 PVC. • Black and red wires covered by a white sheath. • Wire size (mm) is an industry term that identifies cable size and is not CONDUCTOR CROSS SECTION AREA.

Cable - Figure 8 - Tinned Part No.

Part No.

Wire Amp Insulation Nominal Nominal Rating Size Cores Length Thickness O.D. (m) Area (mm2) at (mm) 30°C (mm) (mm)

721308

1.84

0.4

7.2

721309

100

1.84

0.4

7.2

• Insulated with RoHS compliant V90 PVC. • Wire size (mm) is an industry term that identifies cable size and is not CONDUCTOR CROSS SECTION AREA.

429

Nominal O.D. (mm)

721301

• Insulated with RoHS compliant V90 PVC. • Wire size (mm) is an industry term that identifies cable size and is not CONDUCTOR CROSS SECTION AREA.

Cable - Three Core - Tinned

Wire Length Nominal Amp Insulation Size at Thickness (m) Area (mm2) Rating (mm) 30°C (mm)

Wire Length Nominal Amp Insulation Size Rating at Thickness (m) Area (mm2) (mm) 30°C (mm)

Nominal O.D. (mm)

721274

1.13

0.6

2.6 x 5.9

721275

100

1.13

0.6

2.6 x 5.9

721276

1.84

0.6

3.1 x 6.7

721277

100

1.84

0.6

3.1 x 6.7

• Insulated with RoHS compliant V90 PVC. • Black line down 1 side for negative recognition. • Wire size (mm) is an industry term that identifies cable size and is not CONDUCTOR CROSS SECTION AREA.

www.samallen.com.au

Marine & Automotive Electrical Cables Cable - Figure 8 Part No.

Wire Size (mm)

Length (m)

Nominal Area (mm2)

Amp Insulation Rating at Thickness 30°C (mm)

Nominal O.D. (mm)

721268

1.13

0.6

2.6 x 5.9

721270

1.84

0.6

3.1 x 6.7

• Insulated with RoHS compliant V90 PVC. • Wire size (mm) is an industry term that identifies cable size and is not CONDUCTOR CROSS SECTION AREA.

Cable - Single Core - Auto

Cable - Two Core - Twin Sheath

B&S Size

Length (m)

Nominal Area (mm2)

Amp Rating at 30°C

Insulation Thickness (mm)

Nominal O.D. (mm)

721220

0.9

5.5

721221

0.9

5.5

721222

103

1.1

7.0

1.1

7.0

721222-100 721223 721223-100 721226 721226-100 721227 721227-100

Black 6 B&S Battery Cable - 100m 6

103

Red 6 B&S Battery Cable - 100m 3

168

1.6

10.6

Black 3 B&S Battery Cable - 100m 3

168

1.6

10.6

Red 3 B&S Battery Cable - 100m

721228

188

1.7

11.7

721229

188

1.7

11.7

721230

246

1.7

13.7

721231

246

1.7

13.7

721232

292

1.7

14.90

721233

292

1.7

14.90

Part No.

Length (Mtr)

Nominal Amp Insulation Area Rating at Thickness (mm2) 30°C (mm)

Nominal O.D. (mm)

721279

0.56

0.4

3.1 x 4.9

721280

100

0.56

0.4

3.1 x 4.9

721281

1.13

0.4

2.6 x 5.9

721282

100

1.13

0.4

2.6 x 5.9

721283

1.84

0.4

3.1 x 6.7

721284

100

1.84

0.4

3.1 x 6.7

721285

2.9

0.6

4.5 x 7.4

721286

100

2.9

0.6

4.5 x 7.4

721287

4.59

0.6

5.7 x 9.6

721288

100

4.59

0.6

5.7 x 9.6

721289

7.71

0.9

7.1 x 12.5

• Insulated with RoHS compliant V90 PVC. • Red line down 1 side for negative recognition. • Wire size (mm) is an industry term that identifies cable size and is not CONDUCTOR CROSS SECTION AREA.

• Oxygen free plain copper wire. • Insulated with RoHS compliant V90 PVC.

Cable - Single Core - Plain Cooper

Cable - 5 & 7 Core Part No.

Wire Size (mm)

Amp Insulation Nominal Wire Size Cores Length Nominal Rating at Thickness O.D. (mm) (m) Area (mm2) 30°C (mm) (mm)

721310

2.5

0.64

0.4

6.7

721311

2.5

0.64

0.4

7.3

721312

1.84

0.4

8.2

721313

1.84

0.4

8.9

• Insulated with RoHS compliant V90 PVC. • Wire size (mm) is an industry term that identifies cable size and is not CONDUCTOR CROSS SECTION AREA.

721310 / 721312

Part No.

Wire Size (mm)

Length (Mtr)

Nominal Amp Insulation Area Rating at Thickness 2 (mm ) 30°C (mm)

Nominal O.D. (mm)

721380

1.13

0.6

2.2

721381

1.13

0.6

2.2

721382

100

1.13

0.6

2.2

721383

100

1.13

0.6

2.2

721384

1.84

0.4

2.6

721385

1.84

0.4

2.6

721386

100

1.84

0.4

2.6

721387

100

1.84

0.4

2.6

721388

2.9

0.4

3.0

721389

2.9

0.4

3.0

721390

100

2.9

0.4

3.0

721391

100

2.9

0.4

3.0

721392

4.59

0.6

4.0

721393

4.59

0.6

4.0

721394

100

4.59

0.6

4.0

721395

100

4.59

0.6

4.0

Lighting & Electrical

Part No.

• Insulated with RoHS compliant V90 PVC. • Wire size (mm) is an industry term that identifies cable size and is not CONDUCTOR CROSS SECTION AREA.

721311 / 721313

www.samallen.com.au

430

Electric Antenna Mount Electric Antenna Mounts Part No. 530963

Volts (V)

Size

Colour

A Shaft B C D E (mm) (in) (mm) (mm) (mm)

530963 12-24 Silver

186

530964 12-24 Black

186

1-14" 159 UNF 1-14" 159 UNF

F1 x F2 (mm)

G1 x G2 (mm)

96 152 x 96 132 x 75

• Effortless Operation: No need to climb up to the roof or T-top to raise or lower your antenna. Enjoy simple control without having to leave the helm. • One-Touch Adjustment: The easy-to-use button design allows you to adjust the antenna’s position smoothly from 0° to 90°, ensuring optimal placement for better reception and convenience. • Fully Sealed Design: Features a fully sealed internal structure to prevent water ingress, with an IP66 rating to withstand the harshest conditions. • High-Torque Brass Motor: Equipped with a premium brass motor that provides high torque, ensuring smooth and reliable operation even in challenging conditions. • Durable Construction: Crafted from premium 6061 aluminium alloy for superior corrosion resistance and long-lasting performance. • Easy Installation: Includes a mounting base and installation instructions, making setup quick and easy. NOTE: Perfectly partnered with the Longreach Pro aerials by Pacific aerials.

530964

F1 G1 4 x Ø7 G2 F2

B 20 C D

Scan For Diagram

Lighting & Electrical

Manual Antenna Mounts 530950

530952

A B 20 F G

4 x Ø9

C Max 75

Ø62 F G 49.5

431

Scan For Manual

Scan For Diagram

Part No.

Colour

530950 530952

Size A (mm)

Shaft B (in)

Silver

120

Black

120

1-14" UNF 1-14" UNF

C (mm)

D (mm)

E (mm)

F (mm)

G (mm)

301

120

301

120

• Efficient Functionality: Safely and conveniently raise or lower your antenna with our easy-to-use mechanism, simplifying operations for enhanced safety and convenience. • Durable Construction: Made from high-strength 6061 aluminium alloy, this mount can withstands harsh marine environments, providing long-lasting reliability. • Adjustable Design: Adjust the antenna between 0° to 90° with ease, ensuring steady positioning and optimal signal reception. • Waterproof Integrity: With an IP66 waterproof rating, the Wahoo 38 is engineered to perform flawlessly in marine settings, protecting against heavy splashing and water jets. • Easy Installation: Each mount comes with a comprehensive installation guide, making setup quick and simple, so you can get back to navigating sooner. • Overall flange dimensions 120x120mm. • Easily adjust your aerial from under the roof. • Made to suits pacific aerials.

Scan For Manual

www.samallen.com.au

Pacific Aerials Antennas Antenna - VHF - Mast Mount - SeaMaster Description

530800

VHF Mast Mount Series

Gain Frequency Antenna Length (dBi) (MHz) (m)

Part No.

530802 VHF Classic Series White

156-162

0.6

530803 VHF Classic Series Black

156-162

0.6

156-162

The SeaMaster Mast Mount antennas are robust and the number one choice for an installation where the lowest possible windage is a requirement. Design with 3dBi gain and can be installed with the cable pack making installation a breeze. • Antenna is ideal for installations that require the lowest possible windage. • Halfwave antenna. • Stainless steel antenna whip. • ABS ferrule. • Stainless steel bracket. • ISO9001 Certified.

Type

Colour

Gain Frequency Antenna Length (dBi) (MHz) (m)

The SeaMaster range is ideal for boaties who don’t want to remove their antenna. Design with 3dBi gain, these antennas are rugged and durable, a flexible design that includes a 2m long cable is ideal for aluminium boats. • Hard wired with cable for boaties who don't need to remove their antenna. • Halfwave antenna. • White or black powder coated stainless steel antenna whip. • Glass-filled nylon base. • Includes a 2m cable and FastFit plugs. • ISO9001 Certified. NOTE: Requires a suitable ground plane.

Antenna - VHF - Boatmaster - SeaMaster Part No.

Type

Colour

Gain Frequency Antenna Length (dBi) (MHz) (m)

530804

VHF Classic Series

White

156-162

530805

VHF Classic Series

Black

156-162

The SeaMaster Classic range antennas are hard-wired with cable for boaties who don’t need to remove their antenna. Design with 3dBi gain, these antennas are rugged and durable and offer outstanding performance. • Hard wired with cable for boaties who don't need to remove their antenna. • Halfwave antenna. • Stainless steel antenna whip. • Glass-filled nylon base. • 2 different mount options. • Push button folding base. • Includes a 4m cable and FastFit plugs. • ISO9001 Certified.

Lighting & Electrical

Part No.

Antenna - VHF - Alloy Boat - SeaMaster

Side Mount Option

www.samallen.com.au

432

Pacific Aerials Antennas Antenna - VHF - Pro Series - SeaMaster Antennas Part No.

530850

530851

Type

Colour

Gain (dBi)

Frequency (MHz)

Antenna Length (m)

530808

VHF Pro Series

White

156-162

0.45

530809

VHF Pro Series

Black

156-162

0.45

530810

VHF Pro Series

White

156-162

530811

VHF Pro Series

Black

156-162

530812

VHF Pro Series

White

156-162

1.8

530813

VHF Pro Series

Black

156-162

1.8

530814

VHF Pro Series

White

156-162

2.4

530815

VHF Pro Series

Black

156-162

2.4

The SeaMaster Pro Series antennas are for boaties who may want to remove the antenna from its base. Design with 3dBi gain offering superior range these antennas made from Ultraglass and glass-filled nylon. They are rugged and durable, offering outstanding performance. • 'No cable' antennas for boaties that may want to remove the antenna from its base. • Ultraglass and glass-filled nylon antennas. • Rugged and durable. • Halfwave antenna. • ISO9001 Certified.

530852

Antenna Mounts - SeaMaster

530853 530808

530849

530812

Part No.

Mount Type

530850

Fold Down Mount

530851 530852

Base Mount Hole Cable Colour Dimensions (mm) (mm) Length (m)

White

81 x 63 x 106

Fold Down Mount

Black

81 x 63 x 106

1" Rail Mount

White

Ø 61

Ø 25

530853

Thru-Deck Mount

White

Ø 35 x 100

Ø 16

530849

Thru-Deck Mount

Black

Ø 35 x 100

Ø 16

Antenna - VHF - Pro Series - LongReach

Lighting & Electrical

Antennas Part No.

530858

530859

530860

530861

Colour

Gain (dBi)

Frequency (MHz)

Antenna Length (m)

530818 VHF Pro Series LongReach White

156-162

1.8

530819 VHF Pro Series LongReach

Type

Black

156-162

1.8

530820 VHF Pro Series LongReach White

156-162

2.5

530821 VHF Pro Series LongReach

Black

156-162

2.5

530822 VHF Pro Series LongReach White

156-162

2.5

530823 VHF Pro Series LongReach

156-162

2.5

Black

The LongReach Pro Series will not disappoint. Design with 3dBi and 6dBi gain offering superior range and made in Ultraglass with stainless steel ferrules. These antennas are rugged and durable and will go the distance. • 'No cable' antennas for boaties that may want to remove the antenna from its base. • Ultraglass and glass-filled nylon antennas. • Rugged and durable. • Stainless steel mounting thread. • Halfwave antenna. • ISO9001 Certified. Antenna Mounts - LongReach

530866 Low Gain Wide Beamwidth Shorter distance

Medium Gain Medium Beamwidth Mid distance

High Gain Very Narrow Beamwidth, Long distance Gain 0 dBi

433

530818

530820

Colour

Base Dimensions (mm)

Mount Hole (mm)

Cable Length (m)

White

93 x 66 x 132

Black

93 x 66 x 132

530860

Heavy-Duty Nylon Fold Down Mount Heavy-Duty Nylon Fold Down Mount S/S Fold Down Mount - Handle

S/S

93 x 66 x 155

530861

S/S Deck Mount

S/S

Ø 64 x 100

530866

S/S Fold Down Mount - Knob

S/S

93 x 66 x 155

Part No.

Mount Type

530858 530859

www.samallen.com.au

Pacific Aerials Antennas Antenna - UHF - Pro Series - SeaMaster Antennas Part No.

Type

Colour

Gain (dBi)

Frequency (MHz)

Antenna Length (m)

530900

UHF Pro Series

White

477

1.8

530901

UHF Pro Series

Black

477

1.8

530902

UHF Pro Series

White

477

2.4

530903

UHF Pro Series

Black

477

2.4

Mount Type

530850

Fold Down Mount

530851 530852

Base Mount Hole Cable Colour Dimensions (mm) (mm) Length (m)

White

81 x 63 x 106

Fold Down Mount

Black

81 x 63 x 106

1" Rail Mount

White

Ø 61

Ø 25

530853

Thru-Deck Mount

White

Ø 35 x 100

Ø 16

530849

Thru-Deck Mount

Black

Ø 35 x 100

Ø 16

530850

530851

530852

530853 530849

530900 / 530902

Antenna - UHF - Pro Series - LongReach Colour

Gain (dBi)

Frequency (MHz)

Antenna Length (m)

530906 UHF Pro Series LongReach

White

477

1.8

530907 UHF Pro Series LongReach

Black

477

1.8

530908 UHF Pro Series LongReach

White

477

2.4

530909 UHF Pro Series LongReach

Black

477

2.4

Type

The LongReach Pro Series will not disappoint. Design with 3dBi gain offering superior range and made in Ultraglass with stainless steel ferrules. These antennas are rugged and durable and will go the distance. • 'No cable' antennas for boaties that may want to remove the antenna from its base. • Ultraglass and glass-filled nylon antennas. • Rugged and durable. • Stainless steel mounting thread. • Halfwave antenna. • ISO9001 Certified.

Antenna Mounts - LongReach Colour

Base Dimensions (mm)

Mount Hole (mm)

Cable Length (m)

Part No.

Mount Type

530858

White

93 x 66 x 132

Black

93 x 66 x 132

530860

Heavy-Duty Nylon Fold Down Mount Heavy-Duty Nylon Fold Down Mount S/S Fold Down Mount - Handle

S/S

93 x 66 x 155

530861

S/S Deck Mount

S/S

Ø 64 x 100

530859

Lighting & Electrical

Antennas Part No.

530858

530859

530860

530861

530908

www.samallen.com.au

530906

434

Pacific Aerials Antennas Antenna - AM/FM - Classic Series - SeaMaster Part No.

Type

Colour

Frequency (VHF)

Antenna Length (m)

530824

AM/FM Classic Series

White

AM/FM

530825

AM/FM Classic Series

Black

AM/FM

The SeaMaster Classic Series AM/FM antenna are robust and reliable providing outstanding reception for years to come. AM/FM antennas provide great reception at sea. • Hard wired with cable for boaties who don't need to remove their antenna. • Halfwave antenna. • White or black powder coated stainless steel antenna whip. • Glass-filled nylon base. • 2 mounting options. • Push button folding base. • Includes a 5m cable and FastFit plugs. • ISO9001 Certified.

Side Mount Option

Antenna - AM/FM - Pro Series - SeaMaster Antennas

Lighting & Electrical

530854

530855

530856

Part No.

Description

Colour

Frequency

Antenna Length (m)

530826

AM/FM Pro Series

White

AM/FM

0.45

530827

AM/FM Pro Series

Black

AM/FM

0.45

530828

AM/FM Pro Series

White

AM/FM

530829

AM/FM Pro Series

Black

AM/FM

530830

AM/FM Pro Series

White

AM/FM

1.8

530831

AM/FM Pro Series

Black

AM/FM

1.8

530832

AM/FM Pro Series

White

AM/FM

2.4

530833

AM/FM Pro Series

Black

AM/FM

2.4

The SeaMaster Pro Series AM/FM antenna are robust and reliable providing outstanding reception for years to come. Purpose built for boaties who may want to remove the antenna from it's base. Height matters so choose the longest antenna possible to suit your application. • 'No cable' antennas for boaties that may want to remove the antenna from its base. • Ultraglass and glass-filled nylon antennas. • Rugged and durable. • Nylon ferrule. • Open circuit. • AM/FM radio plug fitted to base. • ISO9001 Certified. Antenna Mounts - SeaMaster - AM/FM

530857

530827

435

530831/530833

Colour

Base Dimensions (mm)

530854 Nylon Fold Down Mount White

81 x 63 x 106

530855 Nylon Fold Down Mount

Black

530856

Thru-Deck Mount

White

530857

Thru-Deck Mount

Black

Part No.

Mount Type

www.samallen.com.au

Mount Cable Hole Length (mm) (m)

81 x 63 x 106

Ø 35 x 100

Ø 16

Ø 35 x 100

Ø 16

Pacific Aerials Antennas Antenna - AM/FM - Pro Series - LongReach Antennas Part No.

Type

Colour

Frequency

Antenna Length (m)

530894

AM/FM Pro Series LongReach

White

AM/FM

1.8

530895

AM/FM Pro Series LongReach

Black

AM/FM

1.8

530896

AM/FM Pro Series LongReach

White

AM/FM

2.4

530897

AM/FM Pro Series LongReach

Black

AM/FM

2.4

The LongReach Pro Series AM/FM antenna are robust and reliable with a stainless steel base providing outstanding reception for years to come. Purpose built for boaties who may want to remove the antenna from it's base. Height matters so choose the longest antenna possible to suit your application. • 'No cable' antennas for boaties that may want to remove the antenna from its base. • Ultraglass and glass-filled nylon antennas. • Rugged and durable. • Stainless steel mounting thread. • Open circuit. • AM/FM radio plug fitted to base. • ISO9001 Certified.

530862

530863

530864

530865

Antenna Mounts - LongReach - AM/FM Colour

Base Dimensions (mm)

Mount Hole (mm)

Cable Length (m)

White

93 x 66 x 132

Black

93 x 66 x 132

S/S

93 x 66 x 155

S/S Fold Down Mount

S/S

93 x 66 x 155

1" Rail Mount

White

Ø 61

Ø 25

Part No.

Mount Type

530862

530864

Heavy-Duty Nylon Fold Down Mount Heavy-Duty Nylon Fold Down Mount S/S Fold Down Mount with Handle

530865 530935

530863

530935

530897

530895

Lighting & Electrical

Antenna - AIS Gain Frequency Antenna Colour (dBi) Length (MHz) (m)

Part No.

Description

530844

AIS Stainless Steel Masthead Antenna

S/S

161-163

530846

AIS SeaMaster Pro Ultraglass Antenna

White

161-163

1.8

530848

AIS LongReach Pro Ultraglass Antenna

White

161-163

2.4

530848BLK AIS LongReach Pro Ultraglass Antenna

Black

161-163

2.4

AIS - Automatic Identification System is a marine tracking system used for identifying and locating vessels by electronically exchanging data with nearby ships. The AIS unit uses a standardised transceiver to broadcast position, speed, name, course and destination of vessels. The frequency used to transmit this data is higher than marine VHF, therefore using a standard marine antenna may compromise the performance of the AIS. It is recommended that you use a dedicated AIS antenna to ensure maximum performance and safety. • Identifying and locating vessels by electronically exchanging data with nearby vessels. • 530844 antenna is ideal for installs that require the lowest possible windage. • Halfwave antenna. • ISO9001 Certified. Antenna Mounts - SeaMaster Part No.

Mount Type

Colour

Base Dimensions (mm)

Mount Hole Cable (mm) Length (m)

530850

Fold Down Mount

White

81 x 63 x 106

530851

Fold Down Mount

Black

81 x 63 x 106

530852

1" Rail Mount

White

Ø 61

Ø 25

530853

Thru-Deck Mount

White

Ø 35 x 100

Ø 16

530849

Thru-Deck Mount

Black

Ø 35 x 100

Ø 16

www.samallen.com.au

530844

530848BLK

530848

530846

436

Pacific Aerials Antennas Antenna - Quad Band - Pro Series - LongReach Antennas Part No.

530858

Frequency (MHz)

Type

Antenna Length (m)

530836

Quad Band Pro Series LongReach 700-800-900-1800-1900-2100

530838

Quad Band Pro Series LongReach 700-800-900-1800-1900-2100

1.8

530840

Quad Band Pro Series LongReach 700-800-900-1800-1900-2100

2.4

LongReach Quadband Series of cellular antennas are designed to give outstanding coverage and performance across all cellular bands. If you change your provider there is no need to change your antenna. • Excellent coverage across all cellular bands. • Covers cellular bands: 800-900-1800/1900-2100MHz. • 'No cable' antennas for boaties that may want to remove the antenna from its base. • Ultraglass and glass-filled nylon antennas. • Rugged and durable. • Stainless steel mounting thread. • Halfwave antenna. • ISO9001 Certified.

530859

Antenna Mounts - LongReach 530860

Part No.

530858 530859 530860 530861

530861

530836

530838

Mount Type

Colour

Base Mount Hole Cable Dimensions (mm) (mm) Length (m)

Heavy-Duty Nylon Fold White Down Mount Heavy-Duty Nylon Fold Black Down Mount Stainless Steel Fold Down Stainless Mount Steel Stainless Steel Deck Stainless Mount Steel

93 x 66 x 132

93 x 66 x 155

� 64 x 100

530840

Lighting & Electrical

Antenna Accessories - Cables VHF Extension Cables

VHF / AIS Cables Cable Lengths (m)

Part No.

530878

FM / AM Cable

Part No.

Description

530868

VHF Extension Cable

530870

VHF / AIS Cable

530869

VHF Extension Cable

530871

VHF / AIS Cable

530879

530872

VHF / AIS Cable

• ISO9001 Certified.

530874

VHF / AIS Cable

530875

VHF / AIS Cable

530881

VHF / AIS Cable

• ISO9001 Certified.

Description

FM / AM Cables Cable Lengths (m)

Description

• ISO9001 Certified.

VHF cables

437

VHF / AIS cables

www.samallen.com.au

FM / AM cables

Cable Lengths (m)

Pacific Aerials Accessories & Radar Mounts Broadcast Band Splitter - VHF/AM/FM Part No.

530876

Cable Power Impedance Lengths (W) (Ohms) (m)

Description

VHF/AM/FM Broadcast Band Splitter

• Uses VHF antenna to provide AM/FM reception. • Does not degrade the performance of VHF frequencies. • Supplied with VHF and car radio plugs. • ABS plastic housing. • ISO9001 Certified.

Radio Extension Speaker Part No.

Description

Dimensions (L x W x H)

530888

Radio Extension Speaker

80 x 70 x 45

• ISO9001 Certified.

Antenna - Cable Cover Part No.

530882

Description

Cable Cover

• Ideal for a exit or entry cable hole. • ABS plastic housing. • ISO9001 Certified.

Part No.

Description

530884

Antenna Fastfit Jack

530885

Antenna Fastfit Plug

530886

Antenna Fastfit Plug

530884

530885

530886

• ISO9001 Certified.

Antenna - Bases Part No.

Description

Mount Base Colour Dimensions Hole (mm) (mm)

530931

Heavy-Duty Nylon Fold Down White Mount Heavy-Duty Nylon Fold Down Black Mount

530934

1" Rail Mount

530930

White

93 x 66 x 132

� 61

� 25

• Suit antennas with integral cable. • Do not include coaxial cable socket in the antenna base.

530930

Lighting & Electrical

Antenna Fastfit - Jack & Plug

530934 530931

Antenna - Replacement Knob Part No.

530889

Description

Replacement Knob suit S/S Longreach Pro Base

• Suits S/S longreach Pro base.

www.samallen.com.au

438

LED Home & Commercial Lighting Solar Lighting

LED - Solar Smart Sensor Flood Light - 10W NEXT

GEN

IP56

LED

RoHS

CO MP L I A N T

PIR

SENSOR

Part No.

LED Colour

Lumens (lm)

Recharge Time (hrs)

Motion Detection Angle

Motion Detection Distance (m)

Watts (W)

Overall Mounting Hole Dimensions (mm) Max. (mm)

709420

Cool White

1150

120°

≤8

314 x 211 x 37

360°

135°

Lamp Post Mount (Bracket included): Round lamp post Ø 40mm-60mm Square lamp post 30mm-40mm Installations:

185 x 8

• Ideal for building walls, billboards, gardens, pathways, streets, parking lots, bridges, houses, courtyards and areas exposed to sunlight. • Recommend installation height 3-4Mtr. • 360° rotatable bracket and 135° foldable light panel. • Motion sensor offers 120° wide detection angle with high sensitivity. • Protection Rating: IP65. • ABS, PC and aluminium housing. • Optical Lens optimise light. • Mounting brackets included - wall mount or post mount. • Locking screws to hold at the desired angle. • Storage / Working Temperature: -20~50°C. • Made from high quality anti-UV and flame-retardant material. • Solar Panel: 6W, 11V Mono-crystalline silicon. • 64 SMD 2838 LED's. • LED Lifespan: 35,000 Hours. • 2 modes (switch button at the back of the light panel.) Mode A (Battery above 30%) Automatically turns on at 100% brightness when the sensor has detected motion and turns to a lower brightness for 20 seconds of no movement. Mode A (Battery below 30%) Automatically turns on at 100% brightness when the sensor has detected motion and turns off after no movement. Mode B - Turns on at dusk at 20% brightness. • High-performance lithium 7.2V / 3000mAh battery.

Wall Mount

Lamp Post Mount

LED - Solar Smart Sensor Flood Light - 5W NEXT

Lighting & Electrical

GEN

IP56

LED

RoHS

CO MP L I A N T

Part No.

LED Colour

Lumens (lm)

Recharge Time (hrs)

Motion Detection Angle

Motion Detection Distance (m)

Watts (W)

709418

Cool White

500

120°

≤6

PIR

SENSOR

360° 135°

Installations:

439

Wall Mount

Overall Mounting Hole Dimensions (mm) Max. (mm)

217 x 149 x 33

146 x 5

• Ideal for building walls, gardens, pathways, streets, parking lots, bridges, houses, courtyards, camping and areas exposed to sunlight. Recommend installation height 3-4Mtr. • Fold out legs provide a free standing solution while camping. • 360° rotatable bracket and 135° foldable light panel. • One motion sensors offer 120° wide detection angle with high sensitivity. • Rated IP65 and UV stabilised. • Optical Lens optimise light. • Mounting brackets included - wall mount or vertical mount. • Storage / Working Temperature: -20~50°C. • Housing Material: ABS & PC. • Solar Panel: 2.3W Polycrystalline Silicon. • 30 SMD 2835 LED's. • LED Lifespan: 35,000 Hours. • 3 modes (switch button at the back of the light panel.) » Motion detection - 100% (Battery above 30%) 30% brightness after 20 seconds. » Motion detection (Battery below 30%) Light turns off after 30 seconds. » Steady on - Press the switch button for 5 seconds. • High-quality polycrystalline silicon solar panel. • High-performance lithium battery 3000mAh (2 x 1500mAh).

Horizontal Mount

www.samallen.com.au

Solar Lighting LED - Wall Light - Smart Solar With Sensor - Small Frame Colour

Part No.

Lumens Recharge Time (lm) (hrs)

LED Colour

709200

White White/Warm White

200

4-6

709202

Black White/Warm White

200

4-6

Battery

Solar Panel Output

Overall Dimensions H x W x D (mm)

IP65 PIR

3.7V / 0.8W Monocrystal 1200mAH Silicon 3.7V / 0.8W Monocrystal 1200mAH Silicon

152 x 94 x 83.4

SENSOR

152 x 94 x 83.1

• Ideal for courtyards, gardens, balconies, windows, gates, walls, porches and areas exposed to sunlight. • Motion sensor activation. • 120° wide angle detection system up to 6 meters. • Lasts up to 3 nights from a single 6 hour charge. • Lighting: Front - 8 Cool white (6000k) Back - 2 Warm white (3000k) • Easy to install. • Protection Rating: IP65. • Stainless steel mounting screws, expansion plugs and unlock pin included.

709202

709200

2 Modes: Mode B

Mode A

60°

When the sun goes down the lamp automatically switches on to soft mode.

Automatically turns on bright mode when motion is detected from 2-6 meters away and then switches to soft mode after 10 seconds of no motion.

LED - Wall Light - Smart Solar With Sensor - Large

709206

LED Colour

Lumens Recharge Time (lm) (hrs)

Black White/Warm White

400

5-6

Battery

Solar Panel Output

Overall Dimensions H x W x D (mm)

3.7V / 2.3W Monocrystal 2000mAH Silicon

• Ideal for courtyards, gardens, balconies, windows, gates, walls, porches and areas exposed to sunlight. • Motion sensor activation. • 120° wide angle detection system up to 6 meters. • Lasts up to 3 nights from a single 6 hour change. • Lighting: Front - 28 Cool white. Back - 2 Warm white. • Easy to install. • Protection Rating: IP65. • Stainless steel mounting screws, expansion plugs and unlock pin included.

IP65 PIR

212 x 140 x 109

SENSOR

Lighting & Electrical

Frame Colour

Part No.

3 Modes:

Mode A

When the sun goes down the lamp automatically switches on to soft mode. Mode B 60°

Mode C 60°

Automatically turns on bright mode when motion is detected from 2-6 meters away and then dims for 20 seconds of no motion.

60°

Automatically turns on bright mode when motion is detected from 2-6 meters away and turns off after 30 seconds of no motion.

www.samallen.com.au

440

Solar Lighting LED - Solar Wall Light NEXT

GEN

IP65

LED

PIR

RoHS

CO M P LI AN T

SENSOR

Part No.

LED Colour

709210

Cool White

Motion Detection Distance (m)

Motion Lumens Recharge Time Detection (lm) (hrs) Angle

700

120°

5-8m

Watts Overall (W) Dimensions (mm)

233 x 191 x 100

• Ideal for building walls, billboards, gardens, pathways, streets, parking lots, bridges, houses, courtyards and areas exposed to sunlight. • Motion sensors offer 180° wide detection angle with high sensitivity. • Protection Rating: IP65. • Optical Lens optimise light. • Anti-theft mounting brackets included - wall mount or post mount. • Housing Material: ABS & PC. • Solar Panel: 7W Mono Crystalline Silicon. • Solar panel can be adjusted 70°. • 48 main light LED's and 10 wall glow LED’s. • LED Lifespan: 35,000 Hours. • 3 modes: (switch button under the solar panel.) Mode A - Automatically turns on at dusk and remains at 50% brightness. (motion sensor disabled) Mode B - Main light automatically turns on to full brightness when motion is detected, main light turns off and wall glow light turns on after 20 seconds of no motion. Mode C - Main light automatically turns on to full brightness when motion is detected, main light turns off after 20 seconds of no motion. • High-performance lithium battery 5400mAh. • Remote control.

3 Modes: Mode B

Mode A

60°

Main light automatically turns on to full brightness when motion is detected, main light turns off and wall glow light turns on after 20 seconds of no motion.

Main light automatically turns on to full brightness when motion is detected, main light turns off after 20 seconds of no motion.

LED - Solar Brick Wall Light GEN

Lighting & Electrical 441

Automatically turns on at dusk and remains at 50% brightness. (Motion sensor disabled)

Mode C 60°

60°

IP65

LED

PIR

RoHS

CO M P LI AN T

SENSOR

Recharge Motion Time Detection (hrs) Angle

Motion Detection Distance (m)

Part No.

LED Colour Frame Colour Lumens (lm)

Watts Overall (W) Dimensions (mm)

709440

Cool White

White

800

8-10

120°

230 x 97 x 42.7

709442

Cool White

Black

800

8-10

120°

230 x 97 x 42.7

• Ideal for gardens, entrances, fences, balconies, gates, paths and walls. • Lasts 2-4 nights from a single 8-10 hour charge. • Anti-UV and VO highest grade material for fireproof. • Motion sensors offer 120° wide detection angle with high sensitivity. • Protection Rating: IP65. • Easy to install. • No wires. • Fit and forget. • Housing Material: ABS & PC. • Solar Panel: 2.8W Mono Crystalline Silicon with tempered glass. • Mounting screws included.

www.samallen.com.au

Solar Lighting LED - Solar Pillar Light Frame Colour

LED Colour

709212

Dark Grey

White

Lumens Recharge Battery Solar Panel Output Overall Dimensions Time (lm) (mA) H x W x D (mm) (hrs)

2000

20W Mono6000 Crystalline Silicon

GEN

Part No.

IP65

LED

PIR

RoHS

CO MP L IANT

SENSOR

800 x 220 x 90

Durable aluminium housing

Bright 2000 lumens LED’s

PIR sensor detects movement up to 10m away

20W Mono Crystalline panel embedded in a stylish glass panel

LED - Solar Light & Panel Part No.

709214

Description

Multi-purpose LED Light with Solar White Panel

950

9.5

7-8

GEN

Solar Panel LED Light LED Lumens Watts Solar Panel Recharge Dimensions Dimensions Colour (lm) (W) Watts (W) Time (hrs) H x W x D (mm) H x W x D (mm)

LED

338 x 210 x 17 471 x 46 x 46

• Easy to install. • 120° of motion detection and up to 6m. • Multiple modes: Portable Mode: M1 - 50% brightness. M2 - 100% brightness. • Sensor Mode*: M1 - 100% brightness when motion is detected, after 20 seconds light goes to 5% brightness. M2 - 100% brightness until battery reaches 30%, then the light switches over to M1. • LED light shows what percentage the battery is at - 25%, 50%, 75% and 100%. • Protection Rating: IP65 - Solar panel. IP20 - LED light. • 7200mAh lithium battery. • The lithium battery also doubles as a device charger. • Includes two mounting brackets for easy mounting in different locations. NOTE: Multi-purpose LED light is rated at IP20 and is not designed to be left out in wet weather. Solar panel is rated at IP65.

Can be mounted with magnets

www.samallen.com.au

Can be hung with the foldable hook

PIR

RoHS

CO MP L IANT

SENSOR

Lighting & Electrical

• Ideal for courtyards, gardens, parks, balconies, gates, porches and areas exposed to sunlight. • Motion sensor activation. • Double sided illumination. • Double glazed solar panel. • 40 x SMD3030 LED’s • PIR sensor detects movement up to 10m away. • 120° wide angle detection system up to 6 meters. • Light Produced On A Single Charge: Sensor mode - up to 4 nights Constant light mode - up to 2 nights • 2 Modes: Mode A - Automatically turns on to full brightness when movement is detected, after 20 seconds of no movement turns back to ambient lighting. Mode B - Automatically turns on at dusk at 50% brightness and stays on until dawn. • Aluminium housing. • Easy to install. • Protection Rating: IP65. • All mounting hardware included.

442

Down Lighting & Exterior Lighting LED - Down Light Kit - Recessed SUITABLE FOR DC 12V / 24V MULTI-VOLTS

240V

DIMMABLE

RoHS

CO MP L I A N T

Built-in

DRIVER

IP44

Part No.

LED Colour

709958

Warm / Natural / Cool White

Lumens Volts Amps (lm) (V AC) (A)

850

240

0.33

Watts (W)

Beam Angle

Frame Wire Length Cut Out Colour & Plug (m) (mm)

Dimensions Ø x D (mm)

120°

White

110 x 63

0.8

• Perfect solution for any room in your home. • The three pre-set light settings give you the ability to match the ambience to any room, from warm white, neutral white to cool white lighting. • Works perfectly with a dimmer to set the mood for any occasion. The Warm white is ideal for lounges, dining areas or bedrooms, cool white for work areas like kitchens or laundries or neutral white for any room. • 850 lumens equivalent to a 60 watt incandescent bulb, suitable for small rooms, more may be added depending on room size. • Installation is simple, select the desired colour setting output and install the LED downlight as usual. • Dimmable. • Aluminium housing. • Protection Rating: IP44. • 0.8Mtr tinned cable, SAA plug fitted. • AS/NZS 60598.2.2. NOTE: Switch and dimmer not included. 3 Colour Functions • WW - Warm White (3000K) 92mm Cut Out

• NW - Natural White (4500K) • CW - Cool White (6000K) S imply select the desired colour out‑put, and install the light as usual.

63mm

110mm Natural White

Warm White

Cool White

Lighting & Electrical

LED - Flood Light SUITABLE FOR DC 12V / 24V MULTI-VOLTS

240V

RoHS

CO MP L I A N T

Part No.

LED Colour

Lumens (lm)

Volts (V AC)

Watts (W)

LED Housing

Housing Material

Frame Colour

Dimensions H x W x D (mm)

709400

Cool White

4750

240

PC Lens

Plastic Cover

Black

245 x 180 x 70

IP65

• Ultra bright LED flood light. • 360° rotatable bracket. • Excellent cooling system with streamlined fins to increase heat dissipation. • 84 Sanan SMD 2835 LED's. • The whole light cools fast, the max temperature in LED <65°C. • New technology TU-type waterproof gasket. • Additional reflective sheeting increases light efficiency by 2%. • Low degradation LED’s and long lifespan 50,000 hours. • Sloped design end cap to protect the wire and waterproof. • Overheating protection, short circuit protection. • Protection against high and low voltage. • 1.5Mtr tinned cable, SAA plug fitted. • Patented design. • Protection Rating: IP65.

180mm

245mm

70mm

286mm

245mm

286mm

180mm

201mm 24mm 201mm

443

24mm

www.samallen.com.au

Exterior Lighting LED - Smart Sensor & Solar Street Light LED Colour

Lumens (lm)

Watts (W)

Recharge Time (hrs)

709430

Cool White

1600

5-6

709432

Cool White

4800

8-10

Battery

Solar Panel Output

Frame Overall Dimensions Colour H x W x D (mm)

7.4V / 9.5W Polycrystalline Black 5400mAH Silicon 9.6V / 21W Mono-Crystalline Black 12000mAH Silicon

GEN

Part No.

IP56

413 x 232 x 58

LED

RoHS

CO M P LI A NT

PIR

SENSOR

706 x 290 x 74

• Ideal for lighting pathways, streets, parking lots, bridges, houses, gardens, courtyards and areas exposed to sunlight. • Ideal for commercial or residential use. • 120° wide angle detection system 8-12 meters away. • The LED street light automatically turns on when the sun goes down. 709430 Working Modes (switch button beside the sensor.): Mode 1 - Soft light is on for the first 5 hours. Full brightness (1600lm) is activated when motion is detected and returns to soft mode after 20 seconds of no motion. Mode 2 - After 5 hours or low battery (below 30%) Full brightness (1600lm) is activated when motion is detected and returns to soft mode after 20 seconds of no motion, the light will turn of after 5 minutes. The light remains in sensor mode.

709430

709432

LED - Solar - Garden Flame Light LED Colour

Lumens (lm)

Recharge Time Solar/USB

709224

Flame Yellow

12/1.5 Hours

Power Consumption Overall Mode A/B Dimensions (mm)

0.5W/2W

706 x 114.2�

• Ideal for indoor and outdoor use unique innovative flame mode. • Can be placed place on a table, hung by the fold away handles or spiked into the ground with the lawn spike and extension pole included. • LEDs: 18 Dynamic SMD2835 LEDs which have a longer lifespan more energy efficiency and brightness from previous generations. • LED Lifespan: 35,000 Hours. • 2 modes: Mode A - 25% brightness with light sensor. (2 nights) Mode B - Full brightness with light sensor. (4 hours) • Protection Rating: IP65. • Housing Material: ABS & PC. • Solar Panel: 0.7W Polycrystalline Silicon. • 1200mAh lithium battery. *Note Mirco USB Charger not included.

www.samallen.com.au

GEN

Part No.

IP65

DELETED

PIR

SENSOR

LED

RoHS

CO MP LI A NT

Lighting & Electrical

709432 Working Modes: Mode A - Press the button on the lamp 1st time or on the remote, the lamp will automatically turn on at night and keep 60% brightness constantly for 4 hours, then it turns to mode B. Mode B - Automatically turns on fully brightness when the sensor has detected motion in the 8-12m radius and then turns to 30% brightness for 20sec after motion. • Easy to install, no wire, no running power cables, just fit and forget. • Protection Rating: IP65. • SMD 2835 LED's. • Storage Temperature: -40°C ~ 85°C. • Working Temperature: -20°C ~ 55°C. • Mounting brackets included - wall mount or post mount.

444

Commercial Lighting LED - Batten Light - Sensor Part No.

LED Colour

Lumens (lm)

Motion Detection Angle

Motion Detection Distance (m)

Volts (V)

Watts (W)

Overall Dimensions L x W x H (mm)

709460

White

3600

120°

6-8

200-240

1200 x 80 x 43

SUITABLE FOR DC 12V / 24V MULTI-VOLTS

RoHS

CO MP L I A N T

240V

Sensor turns on when movement is detected

Mounting bracket clips into batten light housing

• Ideal for rooms, garage and sheds. • Never turn the light on again. • Sensor detects movement and turns the light on. • Even light output, no dark areas. • Sealed LED diffuser. • Dust and insect proof. • Can be surface or suspended mounted. • Low degradation LED’s and long lifespan 50,000 hours. • Protection Rating: IP20. • Mounting hardware included.

LED - Fluro Light - Multi Watt Part No.

LED Colour

Lumens (lm)

Motion Detection Angle

709462

White

4140-4500

120°

SUITABLE FOR DC 12V / 24V MULTI-VOLTS

240V

RoHS

CO MP L I A N T

Change colour and brightness

Lighting & Electrical

Mounting bracket clips into batten light housing

Volts (V)

Overall Dimensions L x W x H (mm)

Watts (W)

200-240 20 / 30 / 40 1200 x 80 x 43

• Ideal for rooms, garage and sheds. • Tri-wattage selectable by dip switch (before installation). • Large entry hole for electrical wires. • LED replaceable board. • Suspension strap attached to the light for easy install. • Can be surface or suspended mounted. • Low degradation LED’s and long lifespan 50,000 hours. • Protection Rating: IP20.

LED - High Bay Light - 140W / 200W SUITABLE FOR DC 12V / 24V MULTI-VOLTS

240V

RoHS

CO MP L I A N T

IP65

LED Colour

Lumens (lm)

Volts (V AC)

709452 Cool White

26600

709454 Cool White

38000

Part No.

Watts (W)

Beam Angle

Frame Wire Length Dimensions Colour & Plug (m) Ø x H (mm)

220-240 140 675 x SMD 2835

120°

Black

1.2

330 x 178

220-240 200 900 x SMD 2835

120°

Black

1.2

380 x 178

LED Chip Type

• Ideal for warehouses, factory's, cold storage facilities, large undercover areas. • Reduce your power bill by up to 70% compared to using Mercury Vapour bulbs. • Starts instantly without the need to warm up, unlike Mercury Vapour lights. • 6000k colour temperature produces a crisp white light close to day light. • Heavy Duty die cast Aluminium casing. • Optical Lens optimise light. • Working Temperature: -20°C~+45°C. • Ultra long LED lifespan: Up to 50,000hrs. • Includes a heavy-duty eye bolt for quick installation. • Easy to install. • Protection Rating: IP65.

445

www.samallen.com.au

Lighting & Electrical

Notes

www.samallen.com.au

446