The GelBottle Shelf System User Guide

TGB S H E L F SYS T E M USE R G UIDE

MAINTENANCE: • Clean TGB bottles and necks on a regular basis.

• Use (included) rubber seals on glitter and BIAB™ products (see guide below).

• Roll TGB bottles in your hands regularly to prevent separation.

RUBBER SEALS: Use the included rubber seals to prevent leakages.

We recommend these for BIAB™ and thick glitter products.

1. Clean the bottle neck to remove any gel polish residue.

2. Place the rubber seal over the bottle neck and push down to the bottom.

3. Screw the cap on tightly.

4. Check bottles regularly and wipe any leaks to avoid products curing to the shelf.

FIXTURES: As wall materials vary, screws for fixing to wall are not included. For advice on suitable screw systems and how to attach to your wall, contact a professional.

I N S TA L L AT I O N : 1. Hold the shelf in desired wall location and use a level to ensure the shelf is straight.

2. Locate the four screw holes in the shelf (one in each corner) and, using a pencil, mark all four mounting points on the wall. ​ 3. Insert the appropriate wall anchors or screws depending on your wall type.

4. Align the holes on the shelf with the marked points.

5. Place a level on top to confirm the shelf is straight.

6. Tighten screws into the anchors or wall, ensuring firm attachment.

T H E G E L B O T T L E I N C T G B S H E L F SYS T E M G U I D E

02

WA R N I N G S : • M O U N T I N G — The shelf should only be used when securely attached to a wall.

It is not designed to be a free-standing display. ​Ensure the shelf is affixed to the wall by a professional using appropriate fixtures and fittings.

• I N S TA L L AT I O N — Professional installation is recommended to guarantee proper mounting and safety. ​ • I N S P E C T I O N — Periodically inspect the shelf and its mounting to ensure it remains securely attached to the wall. If any signs of damage or instability are detected, discontinue use until the issue is resolved.

• LO CAT I O N — Place the shelf only in areas suitable for its use and product storage, away from direct sunlight or excessive heat.

• D I S C L A I M E R — TGB accepts no responsibility for any damage caused to walls during the installation of the shelf. It is the responsibility of the installer to assess and use proper installation techniques to prevent wall damage.

Please note that the design is patent pending.

T H E G E L B O T T L E I N C T G B S H E L F SYS T E M G U I D E

03