How to maintain and care for your washing machine

How to maintain and care for your washing machine

Many users do not even think that the washing machine, like any complex device, needs to be serviced periodically. They install it haphazardly and operate it for years, not even suspecting the need to clean the filters. In the end, this leads to a breakdown and the call of the master. Let's talk about how to extend the life of your washing machine.

Centering

During the spin cycle, the machine can spin the drum at speeds up to 1000-2000 rpm (or, for a minute, up to 16-33 rpm!). To avoid unnecessary vibrations, it must stand exactly horizontally and on a flat surface. Even if the machine was installed by the master, it is worth double-checking his work with the help of a level.

https://www.washingmachineservicecenterinchennai.com/

If the cabinet is not level, adjust the legs using the wrench provided. Don't forget to lock the nuts.

Please note that you need to set the level exactly at the installation site of the machine itself. To check, try to shake it with your hands in both directions.

If the standard key is lost, you can use the universal one. Most often, manufacturers use nuts for 14.

Centering is affected not only by the adjustment of the legs, but also by the floor itself. If its coating is too soft or damaged, this problem must first be solved.

Even if the machine was installed perfectly, over time the alignment can go astray - for example, if the drum is loaded unevenly. Therefore, it is advisable to periodically recheck it.

To dampen the vibration from the legs, you can use special damping pads.

https://www.washingmachineservicecenterinchennai.com/

Shipping bolts

If the washing machine strives to run away during the spin cycle, and everything is in order with the level, it is worth checking the transport bolts:

They fix the drum so as not to damage it during transportation. However, the latter rotates even with them, because the bolts restrict movement only along the axis of the cylinder:

https://www.washingmachineservicecenterinchennai.com/

In a ready-to-use machine, there should be no bolts for transportation. Manufacturers even specially fill the power cable under one of them - so that you do not forget to unscrew it.

We do this using the supplied key, and then carefully remove the rubber seals.

https://www.washingmachineservicecenterinchennai.com/

It is better not to throw away the transport bolts. They will come in handy when you move. You can fix the packaging with tape on the back of the case so as not to lose:

Filters

One of the most important operations that many people forget about is cleaning the filters. There are two of them in modern washing machines: at the inlet and outlet.

The output is located in the lower right corner of the case and is hidden behind a special door.

https://www.washingmachineservicecenterinchennai.com/

Before unscrewing the cap, you need to drain the remaining water using a hose.

The filter has a large grid and holds relatively large things - like a coin or a button. But hair from pets and hair can also get here. Therefore, the mesh must be cleaned regularly.

https://www.washingmachineservicecenterinchennai.com/

The inlet filter can be cleaned less frequently. It is located behind the water supply and consists of two grids. We take out the first and rinse with water.

Try to clean the second with a cotton swab and a needle.

https://www.washingmachineservicecenterinchennai.com/

How to dry the machine

After washing, leave the door open until the drum is completely dry. This is not always convenient, especially if there is not enough space in the bathroom. But when the door is closed, there is no air circulation, which can cause an unpleasant odor.

Sealing gum must be wiped with a rag.

Conclusions

In order for the washing machine to serve for a long time, it is enough to perform simple operations every few months. Clean the filters in time, leave the door open after washing, keep an eye on the alignment and do not forget to remove the transport bolts.