Digital ecohouse 8 fall 2014

house

Canada

the high-performance housing magazine

FALL 2014

HEAT PUMPS

What they are, how they work

NARROW PASSIVE HOUSE Compact house lets nature do the work

CHOOSING WINDOWS A brief guide

MAURER HOUSE

AND STUDIO

Case Study in achieving Net Zero energy

ecohouse CANADA | FALL | 2014

1

2

ecohouse CANADA | fall | 2014

20

14

25

8

The national source of information on Canadian sustainable high-performance homebuilding in partnership with www.ecohome.net.

fall 2014 6

NEWS AND PRODUCTS

8

NARROW PASSIVE HOUSE

Compact house lets nature do the work

CLARENDON SEMIS

14

Residential semi-detached urban infill 20

MAURER HOUSE AND STUDIO

25

HEAT PUMPS

Case Study in achieving Net Zero energy What are they, how they work

28

CHOOSING THE RIGHT WINDOWS FOR YOUR HOME A brief guide

SEE MORE at:

• www.sabmagazine.com â click on ecoHouse Canada • www.ECOHOME.NET

Cover: Maurer House and Studio. Photo: courtesy Florian Maurer. ecohouse CANADA | FALL | 2014

3

Excellence in Window & Door Hardware

4

ecohouse CANADA | fall | 2014

A sister publication of:

Message from the publisher Publishing Partners:

Our new web video series:

Canada Green Building Council

High-performance show and tell

VISIT www.sabmagazine.com for our Product Directory Publisher Don Griffith 800-520-6281, ext. 304, dgriffith@sabmagazine.com Editor Jim Taggart, FRAIC 604-874-0195, architext@telus.net Graphic Design Carine De Pauw 819-778-5040, ext. 308, cdepauw@sabmagazine.com Senior Account Manager Patricia Abbas 416-438-7609, pabbas8@gmail.com editorial advisors • Tom Knezic, M.ARCH., LEED AP, OAA Solares Architecture Inc., www.solares.ca • Roy Nandram, LEED AP, RND Construction, www.rndconstruction.ca • Mike Reynolds, LEED AP-Homes, ecohome.net

Published by:

media + marketing communications 81 Leduc Street | Gatineau Qc | J8X 3A7 | T 819 778 5040

www.janam.net Subscription/address changes: ecohouse@sabmagazine.com, 800-520-6281, ext. 304 Subscription prices

1 year [4 issues] 2 years [8 issues] 3 years [12 issues]

Canada: [Taxes extra] PRINT DIGITAL $17.95 $12.95 $31.95 $21.95 $45.95 $31.95

ISSN 1920-6259 Copyright by Janam Publications Inc. All rights reserved. Contents may not be reprinted or reproduced without written permission.

Views expressed are those of the authors exclusively.

Further to the notice on the next page, ecoHouse Canada is teaming up with our web affiliates at ecohome.net and ecohabitation. com to build a high-performance Photo: Roy Grogan Demonstration House and document its construction in a 20-part video series. Designed to achieve LEED Platinum, the Demo House will be an energy miser while also providing a superior indoor air environment – big considerations in a land where we heat our homes for at least half the year.

The Demo House takes our advocacy for better home construction to another level. All of the main construction steps will be recorded as concise videos which we will make available on our web sites in English and French. We’ll also be talking about the types of products and technologies that can be used. For example, the house will be a slab-on-grade construction [yes, no basement] with in-floor radiant heating.

Passive ideas, in other words free heating and cooling, will be prominent. The point is to provide our readers and viewers with lots of ideas.

We have invited companies that we felt would make a good fit with the Demo House to become sponsors by supplying their products. Several have come on board, and they will be noted in the videos and in the print articles that will be published in upcoming articles of ecoHouse Canada.

The Demo House is on the small side at 1,600 sq.ft. That’s partly because of its semi-rural site, but it’s also in line with our view that smaller homes with spacious, efficient interior design, high energy and water conservation, and interiors of natural daylighting and replenished fresh air, even in winter, will conserve resources and give us a healthier living environment.

This is not to say that we won’t consider building a larger Demo House in the suburbs as the program evolves because such high-performance homes belong everywhere. Watch for more in the Winter 2014/15 issue of ecoHouse Canada.

Don Griffith, Publisher

Publication Mail Agreement #40024961 Return undelivered Canadian address mail to: Janam Publications Inc., 81 Leduc St., Gatineau, Qc J8X 3A7

The print version of ecoHouse Canada uses Rolland Environ100 Satin, a 100% post-consumer fiber that is certified FSC and EcoLogo. It is processed chlorine-free, FSC-recycled and is manufactured using biogas energy.

Please forward comments, article ideas and project contributions to: Don Griffith, Publisher dgriffith@sabmagazine.com - 1 800 520 6281 ext.304

Environmental savings for this issue:

FSC logo

14 Trees

52,769 litres water

799 kg waste

2,078 kg CO2 ecohouse CANADA | FALL | 2014

5

news

Web video highperformance building guide on the way!

ILLUSTRATION: COURTESY ROSALIE REYNOLDS.

ecoHouse Canada and our web partner at Ecohome.net have recently broken ground on a house building project that will act as a vehicle to launch a free-touse video building guide.

The video series will help take some of the mystery out of high-performance home construction, as well as dispel the myth that the cost of a better build is an investment you won’t get back.

In reality, the added money you will pay to the bank on your mortgage for a super-insulated house can be offset by the money you don’t have to spend on heat. So will you actually pay more annually to live in a house like this? Probably not, you just pay it to a different place.

Due to the ever increasing cost of energy, some homeowners that have built to extreme levels of thermal performance say they are actually seeing net monthly savings immediately. Such was noted in the Naugler House published in our Passive House Design Issue published in Fall, 2014.

A nice way to look at it is as if you are buying your heat from the bank rather than renting it from utility companies. And one day your mortgage will stop, where your utiilty heating bills will just keep coming.

The house: ¢ ¢ ¢ ¢ of

1,600 square foot bungalow with no basement, built a slab-on-grade; two bedroom [+office], two bathroom, open concept living space; polished and heated concrete floor - durable, affordable, healthy, and warm! designed for passive heating and cooling, with an estimated 22-25 kWh per square meter energy consumption, or a fraction of what most new homes would use.

The building envelope: The house will be insulated from under the slab to the ceiling with mineral wool [or stone wool] by our sponsor Roxul, including a four foot wide skirt around the perimeter. Roxul is derived in part from post industrial steel slag, and along with a high R value per inch it is unharmed by moisture, fire resistant, and the density of batts installed tightly in stud bays reduces air convection, further reducing heat loss.

Under slab: the slab will be insulated to R-32 with Roxul ComfortBoard CIS [a high-density board insulation] including an R-8 exterior skirt 4 ft. out from the perimeter.

Walls: ¢ 2x6 framed walls with batt insulation in cavities and an additional 8 inches of Roxul Comfortboard IS on the exterior adds up to a true R value of 47; ¢ a peel and stick membrane, by our sponsor Delta [Cosella-Dörken], applied to the exterior of the sheathing as air barrier; ¢ exterior cladding of wood and metal.

Ceiling: ¢ R95 batt insulation covered with a green roof.

The trusses and framing lumber are Forest Stewardship Certified [FSC] and supplied by sponsor Kott Lumber. Numerous other sponsors have supplied products and all will come to light as the construction of the house is documented in print in ecoHouse Canada and in web videos on ecohome.net in what will become a worthwhile guide to high-performance home construction.

Just prior to pouring the slab, all of the sub-slab infrastructure is in place, including 8 in. of Roxul CIS ComfortBoard, 10 mil vapour barrier by sponsor W.R. Meadows, and insulated water pipes and tubing for radiant heaT by sponsor Uponor.

6

ecohouse CANADA | fall | 2014



news AND PRODUCTS

Breaking ground on net-zero energy homes Reid’s Heritage Homes of Guelph has broken ground on the first of 25 Net-Zero Energy Homes – houses that produce at least as much energy as they consume – that will be built across Canada in a $4 million program co-funded by the Canadian Government, Owens Corning Canada and five participating builders. The program will effectively double the number of Net-Zero Energy homes in Canada.

The homes built under the program are ENERGY STAR® qualified homes, meaning they are at least 20% more energy efficient than those built to minimum provincial building codes.

Johns Manville announces higher R-value for spray insulation Johns Manville [JM] has announced that JM Corbond III® closed-cell spray polyurethane foam insulation now offers a R-value of 5.9/inch [11.6ft2/hr/°F/BTU LTT], a change that translates to a 13% higher R-value compared to previous thermal performance of 5.1/inch. With the upgrade, JM Corbond III® has achieved a Type 2 R-value, which designates the highest level of thermal resistance for spray foam under the National Building Code of Canada. JM Corbond III now requires significantly less product to deliver the desired R-value. For example, to achieve R-38 contractors now need 6.4 inches of foam compared to 7.5 inches.

New WiFi floor heating thermostat Vancouver-based Nuheat, the leading manufacturer of electric radiant floor heating systems, has announced North America’s first WiFi floor heating thermostat, the Nuheat SIGNATURE. It gives homeowners full access to all thermostat settings with wireless remote access through a smartphone app [iOS or Android], or a web browser. Changing the temperature or schedule, or viewing energy usage will all be at the homeowners’ fingertips. Nuheat SIGNATURE allows the user to activate the floor heat for vacation properties or to simply turn up the heat for a cozy return home. www.nuheat.com

Zehnder America introduces new US-made HRV/ERV air distribution components Zehnder America is locally sourcing both its new ComfoFlex ducting and register boxes as part of its comprehensive approach to providing both the HRV or ERV and properly matched air distribution components. When a Heat Recovery Ventilation or Energy Recovery Ventilation system is designed with properly matched system components, it will be quiet and provide a smoother installation.

Zehnder’s approach to design, installation and commissioning support has led to significant increased business over the last few years. Zehnder provides the design work so the HRV or ERV system is designed properly and the commissioning process to ensure the ventilation system functions optimally. www.zehnderamerica.com

Fastfoot® a revolutionary alternative to traditional footing forms Manufactured from high-density polyethylene fabric, Fastfoot® is available in 100’ lengths in widths of 50”, 62” and 74”.

Fastfoot® allows any footing to be formed with 2x4s. And that lumber can be reused as there is no alkaline damage from the concrete.

Fastfoot® is lightweight; one 14lb. roll will replace up to 1500lb. of lumber.

Fastfoot® is perfect for rocky, uneven ground. Hammer tack Fastfoot® to your screed boards, and let the fabric do the work. No need to scab lumber on the sides of your footing or shovelling the ground to achieve footing depths.

Fastfoot® is also used as a damp-proof membrane. Preventing moisture from wicking into your home through the footing. www.fab-form.com/fastfoot/newSewnCorner.php

Ads in this issue: 2 4 6 13

Zehnder America Euroline Windows Inc. New Society Publishers Nadurra/Fab-Form Industries

31

32

Polish Construction Editorial Schluter Systems

ecohouse CANADA | FALL | 2014

7

Compact house lets nature do the work

Passive Narrow House

1

Existing garage

Located in a jungle of hip roofs, white vinyl, and pink stucco in East Vancouver, the Passive Narrow House makes green home ownership more affordable through careful planning, use of simple forms, and a combination of inexpensive yet durable materials that reduce maintenance costs. The passive strategies for lighting, heating, cooling, and ventilating run on free solar energy, and the house has the ability to provide rental income of varying amounts based on the family’s changing needs.

By Allison Holden-Pope

The 1,700 sq. ft. three bedroom home has a roof-top penthouse and garden, and an additional 900 sq. ft. of flex basement suite with two additional bedrooms.

Creating a compact home on a small lot in an urban location is a great way to create density, however, it often results in less than desirable outdoor spaces with overlooking neighbours on all sides. The solution? We put the yard on the roof – 664 sq.ft. of private outdoor living space with solar access and unexpected views. The green roof also reduces storm water run off, and the heat island effect.

The house minimizes energy consumption with a highperformance envelope, including thermally-insulated fiberglass windows with argon fill and low-e coatings as well as R46 roofs in addition to the insulating planted roof on top.

Concrete block [CMU] walls, three storeys in height and exposed to south-facing windows, are used as affordable thermal massing inside the insulated envelope. The charcoal-coloured blocks act as both heat sinks and sources as needed, by season.

Green roof The compact house on a small lot uses inexpensive, yet durable materials [1]. The front door opens to a wood-slat wall that screens the staircase [2]. The living room and other areas of the main floor are ventilated in the summer through the stack effect of the central staircase [3].

Site plan

8

ecohouse CANADA | fall | 2014

F

G

E A

B

C D*

D*

Basement

H

J

I

H

M

L

K

B

N C Main floor

2 O

3

P

K

P

Q D

D D Upper floor

R R

K O R

O

Green roof and penthouse

Floor plans

A B C D E F

N

Walk-out patio/entry Living Kitchen Bedrooms Laundry/optional bedroom Mechanical room

G H I J K L

Under stair Rain barrel Back porch Powder room Open above Entry

M N O P Q R

Front porch Dining Deck Bathrooms Laundry room Garden

* Flex bedroom [rental or house] ecohouse CANADA | FALL | 2014

9

Summer sun June 21st May-Jul 21st Apr-Aug 21st

High-angle summer sun blocked by roof overhang Operable door provides roof access to green roof and secure venting for stack

Green roof Indirect light reflects to provide daylighting throughout

4

U-shaped thermal mass wall [CMU] cools by absorbing ambient heat Cool air drawn in from lower windows through stack effect, as it heats it rises and vents out the penthouse door

Rainwater capture

In warm months: roof overhangs shade the south-facing glazing, fresh cool air is circulated through the house via the stack effect, thermal mass walls cool the house by absorbing ambient heat and regulate the temperature by releasing the heat back as the house cools at night.

In cold months: south-facing glazing directs low-angle sunlight direct to the thermal block walls which collect heat and distribute it throughout day and night.

Winter sun

Low-angle winter sun captured by south-facing glazing

Mar-Sept 21st Feb-Oct 21st Jan-Nov 21st Dec 21st Green roof

Heat from direct sunlight is trapped by theral mass wall [CMU] which warms the house Direct and indirect light reflects to provide daylighting throughout U-shaped thermal mass wall [CMU] is warmed by the sun then radiantly heats the house

Rainwater capture

Environmental drawings

10

ecohouse CANADA | fall | 2014

N

North elevation

South elevation

East elevation West elevation

The passive engine

5

The house is designed around a central staircase and atrium which act as the passive engine for the home’s natural ventilation, heating, cooling and daylight systems. The stair wraps around an open daylit ‘shaft’ bordered on three sides by a thermal mass CMU wall. At the top of this staircase and shaft is a penthouse in which the sloped ceiling opens up to a south-facing glazed wall and door. Operable windows are located at varying heights and sides of the house to allow for occupant control and cross ventilation.

In warm weather, the ‘stack effect’ vents warm air out through the penthouse door while drawing cooler air in through lower level windows, effectively circulating fresh air through the entire house. In cold weather, the penthouse door remains closed, trapping warmer air.

The sloped ceiling and lightly painted surfaces of the atrium bounce daylight down to the main floor. The roof over the south-facing glazed penthouse wall was designed to allow winter sun directly into the atrium, and therefore the entire house, while completely shading the glazed elevation in summer, allowing only diffuse daylight to enter.

6

View from the kitchen to the living room at the front of the house [4]. Fiberglass-frame windows with argon fill and low-e coatings help to preserve the R-value of the walls [5]. The house is designed around a central staircase and atrium which act as the passive engine for the home’s natural ventilation and daylighting [6].

Project credits Architect One SEED Architecture + Interiors Inc. General Contractor Hartford Construction Ltd. Landscape Architect Aloe Designs Structural and Geotech Engineer Sharat Chande Envelope Engineer Chester Machniewski Photos Allison Holden-Pope

ecohouse CANADA | FALL | 2014

11

Materials were selected based on the life-cycle principle, with a reduced environmental impact, durability, and the potential for reuse or recycling at the end of their useful life.

Our siding picks, including factory finished fibre-cement panels and steel siding and roofing, all have recycled content, a long service life, and are recyclable. Locally and sustainably harvested cedar siding was used sparingly, and stained with a locally made low-VOC and non-toxic natural oil wood finish.

We used composite decking made of reclaimed wood fibre and recycled plastic bags. Guardrails are aluminum with high recycled content and proven longevity. Fiberglass windows are non-toxic and low-maintenance while being durable and structurally strong, with a low embodied energy and high recycled content.

7 8

In a city like Vancouver, where owning property is a daunting financial prospect for most and building a custom home is attainable only for a lucky few, sustainability can become something that only the wealthy dare to add to their wish list. Narrow Passive House set out to change this approach to single-family housing with its environmental responsiveness and affordability. A passive design and cost-efective material choices, paired with rental income from the convertible two-bedrooom basement suite, made this dream eco-house a financial reality for the young owners. v Allison Holden-Pope is principal at One Seed Architecture + Interiors Inc. in vancouver.

The ceiling of the penthouse at the top of the central stair slopes up to a glazed south-facing wall with an operable glass door [7]. DURABLE STEEL SIDING PAIRED WITH CEDAR SOFFITS AND GUARDRAIL [8]. The vegetated roof provides additional insulation and private green space in a dense neighbourhood [9].

MATERIALS - Wood frame and engineered wood construction with Basalite CMU block with charcoal grey integral colouring oxide additive, minimum 20% recycled content, structural interior wall and thermal mass - Fiberglass windows and doors that are recyclable, energy efficient, argon filled, low-E coated - Roxul Comfortbatt mineral wood batt insulation in roof and walls, min. 40% recycled content, Greenguard low-VOC certified, CFC and HCFC free, and EcoBay CC Can closed-cell spray insulation by Bayer - Claddings are fiber cement siding with EasyTrim aluminum reveals, corrugated pre-finished steel, western red cedar channel siding finished with CBR’s Broda Protektor stain - Fabric-reinforced monolithic rubber roof membrane [1/4” thick] below vegetated roof assembly; Liveroof Standard 4” self-draining modular green roof trays - Furnace operates with heat recovery ventilator - Bamboo and porcelain tile flooring with Schluter Systems DITRA mat and Kerdi membrane for interior tiled areas - “No-added” formaldehyde millwork products used

12

ecohouse CANADA | fall | 2014

9

RUSTIC NEUE N AT U R A L

|

B E AU T I F U L

|

TIMELESS

for

CANADIAN DIRECTORY SUSTAINABLE DESIGN

and

GREEN BUILDING

LISTINGS ORGANIZED BY: âProduct Category âLEED Category

The web guide of products and services for sustainably-designed projects

Showroom | 157A Bentworth Ave | Toronto ON

NADURRA

WWW.SABMAGAZINE.COM/PRODUCT-DIRECTORY.HTML

Eco-Wood Flooring 888.623.8772 | nadurrawood.com

1-4 prod directory house ad.indd 1

2014-10-20 4:26 PM

FASTFOOT® Just got FASTER

NEW

SEWN CORNERS

FAB-FORM INDUSTRIES www.fastfoot.com (888)303-3278 ecohouse CANADA | FALL | 2014

13

1

Clarendon Semis

BY Gordon Erskine

Owner/developer experiments in sustainability vs market realities A

A residential semi-detached urban infill on a small east/west-oriented lot, with each living unit having three bedrooms plus study and attached garage, is a typical redevelopment in an established Ottawa neighbourhood. With one unit retained by the Developer/Owner/Architect and the other sold at market price, the project was a careful experimental blend of the sustainability preferences of the Owner versus market pricing realities.

A

B

B

A

C

C

D

Site plan

A B C D E

14

D

N

Deck Ground floor Garage Porch Concrete sidewalk

ecohouse CANADA | fall | 2014

A

E

Construction Although the market prefers double garages, this would have resulted in the loss of the existing mature deciduous street trees and forced a three-storey design in an area of two-storey houses.

Keeping the mature trees meant going with a single garage.

The home was constructed with insulated concrete form walls [ICF] from foundation footings to the roof trusses. Materials were selected to maximize indoor air quality: floor finishes are entirely hardwood and porcelain tile; plywood was used for subfloor and roof sheathing, and cabinets are solid wood; paints are low-VOC water based; and counter tops and window sills are natural stone.

2

Construction was completed without a single garbage container on site. Engineered floor and roof trusses were delivered from the factory and generated no on-site waste. Footing forms were reused as scaffolding walkways for the ICF construction and as safety guards.

On site paper/cardboard, plastic, metal and organic recycling containers were utilized. Drywall waste was taken to a recycling facility. The biggest challenge was recycling foam from the off-cuts of the ICF system, and the packaging for primarily electrical, plumbing and appliances.

3

The front [west] facade. Keeping the mature trees meant going with a single garage [1]. Materials used indoors provide the best possible air quality: hardwood and porcelain tile floors; solid wood cabinets, low-VOC paint and counter tops and window sills of natural stone [2 AND 3].

The design of the semis was motivated by:

A

A

-minimizing heating/cooling costs -reducing life cycle costs through maintenance- free materials -minimizing water and electrical consumption

B

B

-minimizing waste during construction A high-performance building envelope, simple solar orientation and shading, and the use of natural ventilation were the first steps in meeting these goals. On the more active side, we used heat recovery ventilation [HRV], waste hot water heat recovery, Energy Star appliances, high-efficiency mechanical systems, web-enabled thermostat, on-demand [tankless] hot water tank [HWH], low-flow plumbing fixtures, and energy-efficient lighting [CFL/LED].

Preliminary scoring suggested LEED Platinum for Homes would be very achievable. Walkscore: 75

C

C

Section A-A

A B C

Loft/study Kitchen Basement

ecohouse CANADA | FALL | 2014

15

South unit floor plans N

G

O

A

H B

C

P

I

Q

D J

E

R

F

K

L S S

M

Basement

Ground floor

A B C D E F G H I J K L M N O P Q R S

Basement Winery Sauna Bathroom Mechanical room Storage Great room Dining Pantry Kitchen Powder room Garage Entry Dressing Master bedroom En-suite Bathroom Loft Bedrooms

Second floor

All of the spaces in the above grade area of the home and 75% of the basement area is within 7 m of operable windows [4].

4

High ceilings and operable transom windows provide natural ventilation and deep day lighting to all normally occupied rooms in the home. The only rooms without windows are the pantry, en-suite and powder room. Direction of operable casement windows were carefully located to catch prevailing winds and enhance cross ventilation. Large roof overhangs allow upper level windows to be left open even when raining and small high transom windows can be left open without fear of break ins. The HRV fresh air intake is located so that it is shaded from excessive heat.

100% of the spaces in the above-grade area of the home and 75% of the basement area is within 7.0 m of operable windows [75.4% of the normally occupied space in the basement is within 7.0 m of operable windows - the remainder being mechanical room and storage].

16

ecohouse CANADA | fall | 2014

N

C B C

B

A

D

D

B

South elevation

A

B

C

B

West elevation A

A B C

Masonry Metal siding Wood panels

North elevation

ICF construction from foundation footings to the roof trusses provides an airtight building envelope [5].

5

Water and energy conservation The water and energy conservation measures we used could be applied to almost any house construction. Rain barrels collect irrigation water and minimize erosion at down spouts.

The barrel storage also limits the operation of the sump pump as the site is not served by a storm sewer. Low-flow plumbing fixtures and dual-flush toilets are installed throughout.

PROJECT CREDITS Architect Erskine Dredge & Associates Architects Inc. General Contractor R.K. Porter General Contractors Ltd.

The floor plan carefully locates primary hot water uses near the on-demand hot water heater to minimize running water to get hot water [between laundry and main shower with the ensuite shower across hall].

MATERIALS - Nudura insulated concrete form [ICF] system from footings to roof, and under basement slab; also serves as the air barrier - Blown fiberglass insulation in attic - Sidings are factory-finished wood composite panels, stone veneer and corrugated steel siding - Gas furnace operating from an Ecobee web-enabled thermostat, heat recovery ventilator - On-demand [tankless] hot water heater - Waste water heat recovery pipe - Millwork consists of “no-added� formaldehyde products

The tight urban site and orientation limited window opportunity on the south and forced greater western exposure than normally desired. The site was, therefore, not ideal for passive solar strategies. The home’s mechanical and electrical control system is a web-enabled programmable thermostat for heat/ cool/HRV operation for general air quality and relative humidity control.

ecohouse CANADA | FALL | 2014

17

7

Air conditioning is often not needed because of the highperformance building envelope and mass of the ICF structure, the orientation and shading by overhangs and deciduous trees, and because of adequate natural ventilation. The gas furnace is 97.6% efficient with ECM variable speed motor and the air conditioner has a SEER rating of 14.5. The gas fireplace will heat the home in the event of a power failure.

Gas consumption in the past 12 months was 965 CY for heating dryer, fireplace, range, BBQ and hot water. This equates to less than $500, including taxes. In the event of a gas interruption, the home could be heated with a standard 1,500 watt hair dryer [but we ended up installing a furnace]. v Gordon Erskine is a partner in Erskine Dredge & Associates Architects Inc., Ottawa.

6 The rear of the house showing the wood panels, steel siding and stone siding [6]. The back yard is an extension of the living space [7].

Lessons learned Hard sell: From a developer’s perspective it is difficult to sell the “behind the scenes” sustainability features. The other side of the Semi sold for the same price as the other new Semi-detached homes in the neighbourhood, even though there was about $50,000 worth of sustainable elements which will bring savings in lower maintenance and energy expenses, and a superior living environment.

Market dictates: Heat loss estimates suggested a 1,500 watt hair dryer would be enough for heating but my Realtor said he would have trouble selling a home without a real furnace. We installed the smallest gas-fired furnace on the market, but I feel the cost was unwarranted.

Because of the electrical demand of the homes [due in large part to all major appliances being gas fired], my electrician suggested using a 60-amp service but, again, the market demanded a 100-amp service, and even that seems inadequate to many buyers.

Also, with the good natural ventilation designed into the homes, and the high insulation and air tightness of the ICF construction, air conditioning is really not needed. But no A/C would have been a ‘no-go’ for selling the house.

18

ecohouse CANADA | fall | 2014

Product choices: For better energy efficiency, it would be better practice to insulate all the hot water lines.

More switches should have been installed to allow turning off ghost demands, as well as a master to turn off all but necessary electrical demands for extended vacations.

After living in the home for a few years I wish I had invested in really high performance windows and made them bigger. A skylight into the central stair would have brought much needed natural light into the core and improved ventilation, particularly on the ground floor. With no operable window in or beside the front door, natural ventilation on the ground floor is limited to windows in the back and sides of the home. LED technology has progressed and prices have dropped dramatically so at least light fixtures can be changed as desired.

No spec-build: I would develop another sustainable infill project if I presold, but would not likely build another on spec.

2015 Editorial & marketing opportunities Suggest or contribute your ideas and articles related to sustainable high-performance housing.

Use ecoHouse Canada as your access to the market through print and digital advertising, our web blog, sponsorship of the Canadian Green Building Awards, and participation in our Demonstration House. We have a lot to offer!

spring



u

u

Contains Special Supplement published with the Canada Green Building Council [CaGBC] - The LEED-for-Homes in Review: An overview of all houses that were LEED certified in 2014 Bonus distribution: Canada Green Building Council national conference.



summer

Special Annual Issue: The Canadian Green Building Awards, a joint program with the Canada Green Building Council, covering the winning residential projects from this annual national program.

Bonus distribution: Canada Green Building Council national conference in June.

Also distributed at the IIDEX Design Conference and Construct Canada Conference.



Special feature: Demo House round-up, Review of the building methods and products used in our 2014/15 state-of-the-art high-performance Demonstration Home.

Bonus distribution: Toronto Green Building Festival, IIDEX Design Conference and Construct Canada Conference.

winter



fall

Aging-in-Place Housing: Affordability, technical excellence, accessibility, and environmentally-preferable products for this housing type.

• PLUS Lights, appliances and all things electrical.

Bonus distribution: Canada Green Building Chapters.

PLUS!

-

HOUSING CASE STUDIES PRODUCT PROFILES INDUSTRY NEWS AND INTERVIEWS ecohouse CANADA | FALL | 2014

19

MAURER HOUSE

AND STUDIO Case Study in achieving Net Zero energy Built in 2003, the 1,850 sq. ft. Maurer House overlooks Lake Okanagan in BC on a sloping site with bedrock outcrops that we built around by dividing the house into three pieces around a central garden and mature trees: a studio/garage on the east, the master bedroom pavilion on the south, and the main living pavilion on the west.

BY Florian Maurer Garden Bedroom cabin

Garage

1

Studio Main house

The house overlooks Lake Okanagan and is built in tHREE separate PAVILIONs: bedroom, living/kitchen/dining and stUdio, to accommodate the contours of the rock outcrops [1].

The gently sloping shed roofs and exterior wood screens blend the pavilions into the landscape. Construction consists of an exposed glulam post and beam frame, large expanses of high-performance glazing, and profiles galvalume cladding. Glazing is applied directly to the glulam framing, and the glazing beads are rectangular Douglas fir pieces that appear as part of the frame.

We used high quality, durable materials in a simple structural form: a modest approach that has brought the house a number of architectural awards, among them a Governor General’s Medal for Architecture in 2006.

The jury for this Award said, in part, “The project’s convincing economies offer a valuable contribution to promote environmental sustainability, commonsense and restraint. In a context dominated by generic, often overbuilt houses, the building is a visible alternative and incentive for discussion.”

Site plan

20

N

ecohouse CANADA | fall | 2014

Without high-tech gizmos it found its way into the book “150 Best Eco House Ideas” [Collins Design, New York, 2010], among numerous other publications.

Improvements since 2003

The Photovoltaic System

Our goal was to reach Net Zero energy but our building budget of $120/sq.ft. in 2003 wasn’t enough to pay for some components that would have made the building even less wasteful. We rectified this three years ago with the idea to generate all the building’s energy needs on site. These are the project’s components:

This was the first step on the road to “net zero”. The time to act had come when the local utility started to allow net metering.

- a grid-tie photovoltaic system expected to meet all heating, lighting and cooling loads; - a geothermal heating system replacing the existing boiler, using the existing radiant in-floor heating system; - a gas fired on-demand boiler replacing the existing boiler-mate for domestic hot water, and to act as emergency back-up to the heat pump; - replacing the gas-fired hot water tank in the small stand-alone studio with a baby electric boiler, tied into the existing radiant infloor heating system; - improving the building envelope by eliminating the open combustion air inlet, which the new on-demand unit no longer needs.

In net metering, power is sold to the utility in times of surplus, and bought back in times of shortfall. It avoids the inefficient and toxic batteries associated with off-grid systems. To feed power into the grid it has to be converted from low voltage direct current [DC] into line voltage alternating current [AC]. This was traditionally done by a single inverter between PV modules and the grid.

New “microinverters” convert the current at each module into 240V AC. The advantages are safety and efficiency: safety in avoiding the hazards of low voltage/high amperage current, and efficiency by the 98% conversion rate of the inverters through avoidance of high line loss associated with low voltage, and because the performance of each array is no longer limited by its “weakest link”, such as a shaded module. That’s the system we chose.

We looked at Environment Canada data and hoped that 30 panels of 230W nominal capacity for each would do the trick. This system started operating on August 18, 2013 and we monitored the performance on the microinverter manufacturer’s website [Enphase].

ecohouse CANADA | FALL | 2014

21

The Geothermal System and Back-Up

Three Years Later

The ground source heat pump is almost silent and requires less space. A field of two 240-ft. deep wells was connected to a ground source heat pump with insulated lines, covered with rigid insulation, soil and a flagstone path. The pump is sized generously to take the full heating load under all conditions, and circulates through a large buffer tank to avoid cycling on and off too often. The system also provides slab cooling to a set temperature of 17° C, a temperature always above the dewpoint during summer in this climate, to avoid condensation in the slab.

Even without the subsequent and planned upgrades the house was assessed under the Live Smart BC program and received an Energuide rating of 92.

The initial idea was to avoid fossil fuels completely, cook on an induction cooktop, and have an electric boiler as backup and for hot water. However, the existing electrical service was not sized appropriately, so we opted for a dual flow on-demand gas-fired boiler with an efficiency of 95.4%. A baby-electric boiler in the stand-alone studio was deemed to be small enough to not upset the plan too seriously.

New 4-ton heat pump

Very soon we found that a tree shading part of the roof affected the solar harvest more than anticipated, and that even after its removal reaching our target of 10,000 kWh would be doubtful. A fourth row of 10 panels of 248W nominal capacity was added in March 2012, boosting the annual harvest to 8,000 kWh, still shy of the target.

We plan to add another 12 panels.

The big mistake was the so-called “baby” electric boiler in the studio which consumes almost 2,000 kWh. We are planning to change it to either a small air-to-water heat pump or an Energuide 95.4 on-demand gas boiler.

We should reach Energuide 100 next year, but it would have been best to do the things right from the start, not as a retrofit. By making our house about 100 sq.ft. smaller than a conventional house, the cost of our net zero house comes in at about the same.

9.Kw PV system 40 modules/40 microinverters aspect ESE, slope 10%

Main house Access road Master bedroom Studio

Site section

N

2-240’ deep geothermal wells splayed to achieve separation

2

3

4

22

ecohouse CANADA | fall | 2014

MATERIALS - Post and beam construction of glued-laminated timber, with fixed glazing units of low-E, soft-coated glass; fiberglass batt insulation and standard membranes.

- Cladding is corrugated galvalume - 9.Kw PV system, 40 modules with 40 microinverters - Geothermal system for in-floor radiant heating with back-up from on-demand boiler.

- Flooring is porcelain tile throughout

Concluding thoughts It’s troubling when words such as “conservation” are used to give environmentally questionable measures a positive spin, such as the utility Fortis BC’s “Residential Conservation Rate’’, whose sole objective, I believe, is to punish the use of electric power for heating and to encourage switching to natural gas: there is no energy “conserved”, it is just changed from a potentially non-polluting, renewable energy source to a polluting, non-renewable one.

With the “Net Zero” project the Maurer House wants to make a case for Ecological Commonsense. If we use non-polluting, renewable energy, why can’t we use lots of it so that we can have, for example, as much glass as we want to make our buildings wonderful places that embrace nature. We can still make choices that allow us to live well without being wasteful. v

6

Florian Maurer is an award-winning architect in Naramata, BC.

5

7

The approach to the studio from the street [2]. PV modules cover the roof of the studio [3]. The interior garden courtyard as seen from the living/dining pavilion back to the studio [4]. View to the living/dining pavilion from the bedroom pavilion. The large roof overhang provides a covered walkway and protection from the sun [5]. The in-floor radiant heating now operates from a new geothermal system [6].

Glazing is applied directly to the glulam framing, The design uses high quality, durable materials in a simple structural form [7].

ecohouse CANADA | FALL | 2014

23

THE PREMIER MAGAZINES AND WEB SITES

The future of building is high performance, and no other publications in Canada cover this topic as consistently as Sustainable Architecture & Building Magazine [SABMag] and ecoHouse Canada.

ON HIGH-PERFORMANCE

BUILDING

u Profiles of sustainably designed projects and renovations

AND RELATED PRODUCTS

u Directory of sustainable products and services

FOR COMMERCIAL/INSTITUTIONAL CONSTRUCTION AND HOME BUILDING

u Continuing Education for LEED professionals u Award-winning layout

THE HIGH-PERFORMANCE HOUSING MAGAZINE FOR DESIGNERS, BUILDERS AND HOMEOWNERS

house

☛ Issue number 42 | wInter 2013/14 | Pm40024961 | $6

special

and

Canadian direCtory oF SuStainable ProduCtS SerViCeS

Issue number 40 | summer 2013 | Pm40024961 | $6

Issue number 41 | FALL 2013 | Pm40024961 | $6

house

Canada

Canada

CaGBC CONFERENCE GUIDE INSIDE

Special issue

for designers, builders and homeowners | fall 2013

for designers, Builders And Homeowners | SPRING 2013

ZEN BARN

VanDusen botAnIcAL GArden

issue

The essential ingredient of building envelopes

the

envelope

The Need for Enhanced Commissioning

House in niAgArA

Maison du

energy efficiency from the foundation up

développement

Tiny TAck House

durable interView

The earTh rangers CenTre CenTre fOr engineering innOVaTiOn benefits of u of Windsor flagship building extend beyond campus sabMag - winter 2013/14

1

PB

sabMag - Summer 2013

sabMag - FALL 2013

1

PB

ecohouse | fall 2013

sabMag - SUMMER 2013

1

PB

ecohouse | SPRING 2013

buIlD a poly-frEE HouSE

ecohouse | fall 2013

painting on your vapour barrier works better

GEorGIa Eco 4-plEx aND THrouGH HouSE 2013 canadian Green building awards Winning projects

1

PB

ecohouse | Summer 2013

ecohouse | SPRING 2013

1

ADVERTISE

Print, digital, web, e-News, regional markets - we have a lot to offer in helping you position and market your products or services to Canadian design and construction professionals, and building managers.

SUBSCRIBE

Get the print or digital editions covering some of the most advanced building projects in Canada, plus articles on building and design trends. https://www.sabmagazine.com/subscribe-shop.html

CONTACT 24

House inside a house could save energy

special issue

A joint program of

Practical improvements to achieve LeeD Platinum ebOM

Miriam Turner on Net-Works™

NESTED DESIGN

Testing the concept of living really small

PASSIVE HOUSE

WINNING PROJECTS

Infill building densifies the city

sabMag - FALL 2013

Net zero works iN the average NeighBourhood

Air BArriers

Pushing

PB

for DESIGNErS, buIlDErS aND HomEoWNErS | Summer 2013

Belgravia

green HouSe

Reclaimed siding melds modern house into historic neighbourhood

Visitor Centre designed to meet Living building Challenge

house

Canada

ecohouse CANADA | fall | 2014

Don Griffith, Publisher 800-520-6281 ext. 304 dgriffith@sabmagazine.com

ecohouse | summer 2013

1

Heat pumps what they are

and how they work

When it comes to residential heating and cooling systems, few types of systems are as energy efficient as heat pumps.

But what exactly are they and how do they work? In short, a heat pump is simply an electrical device that is capable of transferring heat from one place to another. Though it may seem counterintuitive at first, heat can actually be extracted from cold air and added to warmer air.

By Jason Ng Cheng Hin

To explain this in a more practical manner, let us step back a little bit to understand the basics. First of all, for the sake of an analogy, let’s imagine heat as a big body of water. Logically, water would flow from a higher place to a lower place. Similarly, heat naturally flows from a hotter place to a colder place.

So how is it that we can extract heat from a cold place and send it to a warmer place? Well, it is a little bit like moving water from a low place to a high place. All you need is a pump! Heat is actually defined by the movement of the molecules that make up matter. So in essence, all of the air in the world that is warmer than absolute zero [-273 °C, the temperature at which molecules actually stop moving] contains some amount of heat. So technically, it is possible to extract heat from air of any temperature and send it somewhere else, all it takes is a little energy.

Heat pumps are actually quite commonly used in our everyday lives. In fact, this process is happening almost all the time in your home right now, as refrigerators are actually a typical form of heat pump.

Heat pumps are able to extract heat from air by using a liquid refrigerant [more on this later] to absorb and remove heat and what’s known as the vapour-compression refrigeration cycle, which is a fancy name for a thermodynamic process that is commonly used for heat transfer applications.

There are four basic steps: 1. The process starts where the refrigerant is in a state known as a saturated vapour. This saturated vapour enters a compressor where the pressure is increased and, consequently, the temperature as well.

2. Hot vapour is then passed through a condenser, where it is condensed back into liquid form. The result of this condensation is that the refrigerant will lose its heat. This is what is what is occurring right now in your household refrigerator, and why it is warm in the back.

3. The liquid refrigerant then passes through an expansion valve, where the pressure drops and the liquid becomes much colder. At this point, the fluid is typically colder than the space that needs to be cooled.

4. Lastly, the cold fluid, which is now partially evaporated due to the pressure drop, passes through an evaporator, which typically consists of a coil or long tubes.

A fan then blows air over the coil or tubes, cooling the air. This causes the refrigerant to evaporate within the tubes, returning it to its original saturated vapour state.

Basically, what is going on is that a refrigerant is being forced to go through cycles of condensing and evaporating where the temperature and pressure rise and drop significantly. These temperature fluctuations are then used to heat or cool a stream of air or water, depending on the application.

So that explains a bit about the science behind heat pumps, but what exactly is it that makes heat pumps so interesting for residential heating and cooling applications? The advantages of heat pumps are quite numerous.

First of all, the amount of energy typically required to run the compressor and the fans or pumps is usually significantly less than the amount of heat that can be moved, or in practical terms, ‘generated’. Heat pump performance is usually measured by something called the ‘coefficient of performance’ or COP.

typically in Canada, the best practice is to install heat pumps above grade to protect the outdoor coil from damages due to drainage freezing and snow melt in winter. photos: courtesy of Mitsubishi Electric.

ecohouse CANADA | FALL | 2014

25

The COP is the amount of heat delivered, or moved, divided by the amount of energy required to move that heat. The COP of an average residential heat pump is usually somewhere around 3, which means that for every one unit of energy you put into the system, 3 units are transferred. When you compare that to an electric baseboard heater, which has a COP of 1 [every unit of energy you put into your electric baseboard comes out as heat], heat pumps suddenly become quite attractive!

Other interesting advantages include increased indoor air quality, since there are no fuels being burned and exhausted and the system will always add fresh air into your home. Heat pumps are also quite versatile; they can be used to heat incoming air from the outside, or as an air-to-water heat pump for generating residential hot water.

Heat pumps are also used in conjunction with geothermal heating and cooling, where the heat is either taken from, or added back to the ground.

Another interesting advantage of heat pumps compared to other residential heating or cooling systems is that a heat pump can actually be configured to do both heating and cooling. The thermodynamic cycle described above can actually be reversed in order to switch it from one function to the other. Instead of taking heat from outside to heat your home on the inside, you can also take heat from inside and throw it outside in order to cool your home.

Heat pumps may sound like a pretty magical device that can accomplish anything, however, they do have a few important downsides.

First of all, their performance is very much dependent on the climate. In very cold climates where the temperature often drops below -10°C, heat pumps may be less effective. But in recent years, the industry has improved cold weather performance with introduction of new refrigerants and the use of preheaters on compressors.

One example is the Thermo Matrix CoolFire Mono Bloc series, even at -25°C the unit still gets 1.6 COP.

This can help you save on purchase price and maintenance costs, as you would have one machine doing the job previously done by two. This can also help you save basement storage space, as heat pumps are typically smaller than an equivalent gas furnace and air conditioner combo.

Compressor

Vapour





Vapour

Evaporator

Condensor

Cold air

Warm air



Liquid + vapour





Expansion valve

 Liquid

Typical single-stage vapour compression refrigeration

26

ecohouse CANADA | fall | 2014

Although heat can still be extracted from cold air, heat pumps are generally not well-suited to very cold temperatures for two reasons: 1) The COP tends to drop significantly in very cold weather, thus negating the efficiency advantage; 2) In colder climates such as most of Canada, the heating demand of a home tends to be much higher than the cooling demand, so much so that in moderately insulated homes it can be impractical to have a heat pump as the sole source of heat.

Generally speaking, in colder climates, it is usually recommended to back up your heat pump with an electric boiler or some other form of heating to ensure the house stays warm during the coldest days of winter. There is an argument that can be made, however, for investing in additional insulation in new homes rather than additional heat generation, so that the heat pump can operate at a more optimal efficiency since less capacity would be required.

The industry has for many years had water-to-air [Geothermal] and air-to-air systems found in many forced air systems, but over the last few years we have seen the emergence of air-towater heat pumps in response to rising utility rates. Hydronic heating and cooling is far more efficient, versatile, and less costly than the conventional systems, especially when combined with controls.

With the right amount of insulation and a properly designed home for passive solar heat gains, it is even possible to heat your home during the coldest days of winter with only a heat pump. Take note that although the system may save you

money in the long run, the initial costs of heat pumps tend to be a bit higher than other systems, especially if a second backup system is also required.

Lastly, the heat generated by a heat pump is typically less intense than a conventional gas furnace. For example, a heat pump typically generates heat at temperatures between 32 and 37Âş Celsius, which is slightly lower than your body temperature. By comparison, a typical natural gas furnace will generate heat at closer to 50Âş Celsius, which is much more comfortable on a cold winter day. Some people find this lower temperature heat a little uncomfortable in colder weather, particularly in a poorly insulated house.

So if you’re in the market for a new central heating and cooling system for your home, you should definitely consider a heat pump for your heating and cooling needs. How much sense it makes will depend on the insulation level of your house.

In a super-insulated home a heat pump could provide all the heat and comfort you need, but in a house built to code you may need a backup. So as a homeowner and builder, this is where you will need to decide between investing in insulation or an additional heating system. Either way, heat pumps are definitely a very efficient heating and cooling source for your home and in many cases the advantages can outweigh the disadvantages. v Jason Ng Cheng Hin, Eng, M.A.Sc. Jason is a consulting engineer who specializes in energy efficiency in buildings and building energy simulations. Our thanks to Jeff Hoogveld of Thermo Matrix in Kelowna, and to Maggie Yeun, P.Eng of Mitsubishi Electric in Toronto for their help with this article.

ecohouse CANADA | FALL | 2014

27

Windows are essential to our houses. They give us natural light, a way to ventilate the home without depending on mechanical systems, a means of emergency exit, and offer an alternative way to heat the house free of charge through passive heating.

by Denis Boyer

a brief guide:

Choosing the right windows for your home

even houses certified to the passive house standard can use large windows if their quality is high and the orientation takes advantage of the sun’s energy. the bernhardt house by cascadia architects and bernhardt contracting ltd. windows by euroline windows and doors ltd. photo: derek ford.

28

ecohouse CANADA | fall | 2014

But they are also holes in our wall structure, making them by far the weakest part of the thermal envelope of a home. So how should we select our windows to reduce energy bills all year round?

Choosing the wrong windows will work against efforts of adding more insulation to the walls and roof to improve energy efficiency. To illustrate this point, let’s imagine that a home has about 1,800 sq. ft. of walls which are insulated to R50. If the house was fitted with just one 3 feet by 3 feet window with an R-value of 1, the R-value of all of the walls combined would drop to R40 even though the poor-performing window occupies only 0.5% of the total wall area.

If the house actually had two such windows, the R-value would drop further to R33; and if there were one on each façade, the overall effective insulation level would be a mere R25, half of the desired value but with only 2% of the whole wall area covered with windows. The same principle applies to all other parts of the thermal envelope. For instance, there is no need to insulate the roof to R100 when the walls are just R30.

If, however, the windows performed better, the overall R-value of the wall system could be much improved. The table below gives an idea of what could be achieved with different window surfaces and R-values for that same wall insulation level of R50.

Having more window area, on the other hand, guarantees more solar gain [except for North-oriented windows] and natural light and, thus, can lead to even lower energy bills.

WINDOW AREA

WINDOW R-VALUE

OVERALL R-VALUE

[% of wall occupied by windows]

[ft2 x°F x hr/Btu]

[ft2 x°F x hr/Btu]

1

1

2

1

25.2

4

1

16.9

10

1

1

4

2

4

40.6

4

4

34.2

10

4

1

33.5

8.5 2

44.8

23.2 3

1

8

2

8

45.2

4

8

41.3

10

8

32.8

47.5

Table 1: The effects of window area and quality on the overall R-value of a R-50 wall [with no windows].

1

Entry-level window; e.g. aluminum frame with no thermal break. High SHGC. See Table 2 for SHGC definition.

2

High-quality double pane or mid-level triple-pane glazing. SHGC > 0.6.

3 Very high-quality triple-pane glazing and frame, entry level Passivhaus certified. 0.3 ≤ SHGC ≤ 0.6.

Table 1 shows that increasing window performance a little can have a dramatic impact on the overall performance of the thermal envelope. For instance, with a high performing window having an R-value of 8 the wall would perform the same with 10% of window area as it would with 4% for windows having an R-value of 4, or just 1% for windows with an R-value of 1.

ecohouse CANADA | FALL | 2014

29

Choosing for orientation

Some recommendations

Care must be taken, however, in choosing the right glazing characteristics for each orientation.

• Choose the best windows you can afford.

Work with the window supplier to get the right glazing for each orientation.

On the North side, go with the the highest R-value, period. On the East and West façades, a combination of a high R-value and low solar gain coefficient [SHGC1] is best to prevent overheating, unless the windows are well protected from direct sunlight in the summer and in between the hot and cold seasons, for instance, with shutters, sunscreens or vegetation.

On the South side of the house, some R-value can be traded for higher solar gains in order to benefit from the low winter sun; therefore, look for a high SHGC with the highest possible R-value [or its opposite: the lowest possible U value, since this is the value usually provided for windows and doors]. South glazing should, however, be well protected from summer sun, which is a simple exercise in geometry in designing roof overhangs and the like. As a general rule, our cold winters warrant triple-pane windows with high quality window frames.

The frame alone can represent up to 25% of total window area so the same logic applies here: a low frame R-value will result in poor overall window performance whatever the quality of the glazing.

Typical SHGC values to look for based on orientation are shown in the table below:

WINDOW ORIENTATION

SHGC

NORTH

-

SOUTH

> 0.6

EAST/WEST

< 0.4

Table 2 : Orientation-dependent typical SHGC values.

Frame: Up to 25% of window area U -value should be low Thermal break: Thermal conductivity [W/m . K] Glazing: COG U -value normally given [W/m2 . K]

Glazing: EOG Ψ - value rarely given [W/m . K]

the main components of a window and the technical data to look for in order to calculate the overall window performance. Window makers sometimes only provide the COG [Center of Glass] U-value, which is not representative of the actual performance [the frame is where the window loses most heat].

Window components. COG = Center of Glass. EOG = Edge of Glass. U-value = 1/R-value. The COG and frame U-values along with the EOG Ψ -value can be used [if available] by the most enthusiastic modeller to compute a precise whole-window U-value. Image source: Wikimedia Commons, Oimabe.

Modified by Denis Boyer, Ecohabitation.

30

ecohouse CANADA | fall | 2014

• Choose at least Energy Star certified windows or better [e.g. Passivhaus: www.passivehouse.ca] and try to have all the technical data available [Ucog, Uframe, Ψeog] which should enable the correct calculation of the overall Uw [U-value of the whole window].

Serious manufacturers will gladly provide these, which must be the result of independent testing or simulation.

• Remember that the product should be very airtight. Otherwise the energy saved in heat transfer will be lost in air leakage. Be careful to select glazing with a high coefficient of visible transmittance [VT] and ensure that glazing on all orientations have a matching colour or tint. A high VT means more daylight is available which can save energy for artificial light and its associated cooling load.

• Install the windows to minimize thermal bridging which causes heat to be conducted through the wall framing via the window frame. This can best be achieved by centering the window in the middle of the insulation. Eliminating thermal bridges lowers the risk of condensation, which in turn insures longer life for the product and smaller energy bills.

• Consider also that if you maintain indoor climate at 20°C and 40% relative humidity, condensation will form on any surface whose temperature is 6°C or less. If you keep the room temperature at 21°C and 50% RH, condensation temperature will rise to 10°C. When comes the time to choose windows for any project, keep in mind that better windows may pay for themselves in a few years, while improving occupant comfort and the overall user experience. Shop around and get all the facts. Once again, consider Passivhaus-certified products; they may be worth the extra expenditure, especially if you live in a cold climate.

If in doubt, consider hiring a professional to help you select what is right for your specific project. When it comes to energy efficiency, windows can actually be an asset rather than a liability. v Denis Boyer, P. Eng. M. Eng. Is Energy Efficiency Co-ordinator at Ecohabitation in Montreal, www.ecohabitation.com.

Advertorial

Potential of the Polish construction and interior furnishing industry

T

he construction and interior furnishing industry made a significant contribution to an increase in the Polish economic growth indicators in 2013. Global turbulences of recent years have caused the Polish construction and interior furnishing market to also be one to record lower turnover. However, since 2008 it has continuously held the leading position in comparison to Central and Eastern European markets, where drops in turnover ranged from 20% (Czech Republic, Slovakia, Hungary) up to 50% (Slovenia). The level of optimism on this market has been growing since 2013 and forecasts for 2015 even suggest an improvement in the economic situation on the construction and interior furnishing market. Poland is coming out of the crisis – representatives of the construction and interior furnishing sector are enjoying general trust, which creates a healthy atmosphere and conditions for growth.

According to the latest ranking by Deloitte: “Polish construction companies in 2013 – key players, prospects for growth and diversification” as many as 11 out of 15 of the biggest construction companies recorded profit from sales. In comparison to the year before, 9 out of the 15 largest construction firms (in terms of collected revenue) noted on the Warsaw Stock Exchange soared by as much as 58 percent.

Data published in Q1 of 2014 by the Polish Cement Manufacturers Association shows that cement sales in March 2014 grew by 99.5% in comparison to March 2013 and amounted to 1,343,500 tons of cement.

Until 2020 Poland will still be one of the biggest beneficiaries of EU funding. Moreover, a government program under the name “Polish Investments” has also been created and it supports long-term investments with funds from the Bank Gospodarstwa Krajowego (National Economy Bank) and the Polish Development Investments company. The largest investments value-wise are planned in the road construction sector, railway sector, energy sector and environment protection sector. The forecasted economical growth and the necessity to build new, and preserve the existing, infrastructure for transport, energy and environmental protection will certainly revive the sector.

According to the report of September 2012 developed for the Polish Ministry of Economy regarding the construction market in Poland, manufacturers of construction materials when asked about what distinguishes Polish products from their competitors from abroad, said that it was mostly their high quality. Over half of the respondents claimed that a definitive advantage of Polish products also lies in competitive prices.

know how important it is to implement innovations.

A great example of a Polish company that recognizes the important role of new technological solutions for development is Quartec. This company promotes pole construction, based on c-c composite boards, which are innovative, ecologically friendly and completely safe for human health. Those are very important aspects from the clients’ point of view, as Poles increasingly rely on ecology and a healthy lifestyle.

Besides construction firms, it is also worth emphasizing the development of domestic companies from the building finishing and interior furnishing industry. Quite recently Poland has become a tycoon on the window market. The company OKNOPLAST is a leading innovator in Europe, with 1800 stores across the continent. DRUTEX exports vertical windows to such places as: the USA, Mexico, Australia, and the Middle East.

The “FORTE” S.A. factories are the top Polish manufacturers and exporters of furniture; the company has 4 production facilities and a number of commercial companies in Poland. It invests in knowhow and state-of-the-art technologies – it equips machine parks with the most modern devices and manufacturing technologies, and implements and develops a special IT system that supports enterprise management.

Poland is a country that has still got a lot of potential for the construction and interior furnishing industry. There are certainly still many niches to be discovered here (also with regards to technology), as well as a chance for foreign investors to shine. The manufacturers’ experience, the improving situation on world markets, ever better situation of Polish households, and finally, enormous support from the European Union and government programs give Poland phenomenal conditions to grow its construction and interior furnishing industry.

Under the Polish Economy Promotion Program in Canada, Polish businesses are supported by the Polish Ministry of Economy. Through work under the common name “Polish Economy Brands”, financed by the European Union from the funds of the Innovative Economy Operational Programme, Polish companies can present their achievements at international fairs, such as Construct Canada 2014 in Toronto. The main goal of this program is the creation of Polish brands that will be recognized all over the world while at the same time associated with their place of origin.

We warmly invite you to visit the Polish National Exhibition Hall at the Construct Canada 2014 fair.

Representatives of the Polish construction industry

Project co-financed by the European Regional Development Fund under the Innovative Economy Operational Programme.

ecohouse CANADA | FALL | 2014

31

Faster, Thinner Floor Warming

Schluter®-DITRA-HEAT Electric floor warming system with integrated uncoupling Floor warming systems have become very popular. Heating tiled floors increases the need for uncoupling to prevent cracked tiles and grout. Use DITRA-HEAT to get both – warm floors and uncoupling – in a single layer.

• Heating and uncoupling in a single layer • No self-levelers required to encapsulate heating cables (no need to wait for curing) • Place the heating cables exactly where they are needed, without clips or fasteners • Combines the flexibility of loose cable with the ease of installation of a mat system • 120 V and 240 V options • Programmable and non-programmable thermostats available

www.ditra-heat.com | 800-667-8746 32

ecohouse CANADA | fall | 2014

Connect with us!