Installation Process

Step 1: Locate the accelerator pedal under the dashboard on the driver's side.

Step 2: Remove the factory wiring harness from the accelerator pedal by gently pulling it out.

Step 3: Connect the throttle controller's wiring harness to the accelerator pedal's wiring harness.

Step 4: Secure the throttle controller's wiring harness with zip ties or electrical tape.

Step 5: Mount the throttle controller in a convenient location using the provided adhesive strips or screws.

Step 6: Test the throttle controller by turning on the engine and pressing the accelerator pedal. You should feel an immediate improvement in throttle response.