Two-wheeler alloy wheels for ultimate Performance

Two-wheeler alloy wheels for ultimate performance Alloy wheels came as a dynamic change in the industry of tyre manufacturing. Alloy wheels are lightweight because they are manufactured with alloys such as aluminium and magnesium. The method used for the production of alloy wheels is referred to as a casting. In this process, hot molten alloy is poured into the cast of the wheel. As soon as the molten alloy is cooled off, it gets hardened in the cast and the wheel gets extracted. The alloy wheels that provide high performance to the two-wheelers are termed forged alloy wheels. Alloy wheels are very advantageous, especially for bikes and other two-wheelers. However, let us take dig into the benefits of two-wheeler alloy wheels.

Benefits of two-wheeler alloy wheels There are several benefits of two-wheeler alloy wheels. Here, some of the top benefits are discussed below: 

Alloy wheels are much lighter than rims thus you can have better-controlling power over your twowheeler. It helps to reduce the difficulty of two-wheeler handling by removing spring mass and allowing the suspension of the vehicle to work properly with the wheels to improve the grip.

Moreover, lighter alloy wheels help in reducing the overall eight of the two-wheeler.



Alloy wheels are even attached to the two-wheelers for enhancing the look of the vehicle. The alloys utilized for manufacturing these types of wheels are not resistant to damage instead they are manufactured with alloys with bare-metal finishes which are covered with a cover and paint. So, it looks amazing if attached to your two-wheeler.



Alloy wheels are capable of absorbing much heat. The characteristic of heat conduction is very helpful in deviating heat from brakes. This is highly beneficial for the braking system and reduces the chance of brake failure to a great extent.



Alloy wheels can be customized as per your preference. They come in different colors and designs due to the process of their manufacturing. So, you can order your set of alloy wheels as per your choice.



These wheels consist of tubeless tyres. This is extremely advantageous because tubeless tyres do not puncture easily.



Finally, these wheels put a lesser load on the engine thus the engine requires less load for making the wheels roll. This results in an outstanding performance of the engine as a whole.

The manufacturing process of alloy wheels The manufacturing process of two-wheeler alloy wheels consists of eight important stages and the following are the steps mentioned here: 

Melting and Degassing



Casting



Gate Cutting



Machining



Shot Blasting



Painting



Alloy Wheel Assembly

The entire process of manufacturing alloy wheels is done through Gravity Die Casting (GDC) and LowPressure Die (LPDC) Casting to manufacture superior products. Rockman uses the most modern technologies and procedures for GDC and LPDC. What is GDC? Gravity Die Casting is a permanent mould casting process where the molten metal is poured into the vessel from a vessel that temporarily preserves the mould. In this casting process, the mould cavity is filled with no force other than gravity.

What is LPDC? Low-Pressure Die Casting is a comparatively new casting procedure. In this method, the die is filled with molten casting metal from a pressurized furnace. Rockman uses this process for manufacturing highprecision two-wheeler allow wheels. The process is appropriate for manufacturing alloy wheels in high quantities for a limited period.

End note If you are seeking the perfectly suited alloy wheels for your two-wheeler, then none other than Rockman can serve your purpose so efficiently. They are reputable and top-most manufacturers and assemblers of twowheeler alloy wheels which are not only durable but also compliant with quality of global standards.