Page 1

THE

NEW LINE-UP OF PUNCH AMPLIFIERS

QUICK, EASY, C.L.E.A.N. LEVEL SETUP

P1 SUBS

NOW AVAILABLE IN 2OHM $5.99 US

$6.99 CAN

6 PRIME

AMPLIFIER ADDITIONS

PRIME COAXIALS WITH

NEW MIX NEW LOOK


MOTORSPORTS

MARINE


MOBILE


TABLE OF

CONTENTS 5 13 PUNCH AMPS

15 17 C.L.E.A.N.

25 33 PRIME COAX

35 37 P1 SUBS

AMPLIFIER

45

TECHNOLOGIES

53

LINE UP

55

GUTS

57

SUBWOOFER

67

TECHNOLOGIES

73

LINE UP

77

FAMILIES

AMPLIFIER

AMPS COMPARED

OF AN AMPLIFIER

FAMILIES

SUBWOOFER

SUBS COMPARED

SPEAKER

FAMILIES

TECHNOLOGIES

SPEAKER

LINE UP

SPEAKERS COMPARED

FRAMEWORK

OF A SPEAKER

MARINE

PRODUCTS

TECHNOLOGIES

MARINE

VEHICLE

INTERGRATION

ANATOMY

OF A SUBWOOFER

©2013 Rockford Corporation. All Rights Reserved. ROCKFORD FOSGATE®, PUNCH®, 3SIXTY® and associated logos where applicable, are registered trademarks of Rockford Corporation in the United States and/or other countries. iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Rockford Corporation is under license. All other trademarks are the property of their respective owners. Specifications subject to change without notice. “Made for iPod” and “Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.

3

2013 BUYERS GUIDE


CLEAN AD

CLEAN.

The NEW lineup of Punch amplifiers is now available. Visit your local authorized Rockford Fosgate retailer to discover our secret behind a clean sound.

rockfordfosgate.com • 800.366.2349


AMPLIFIERS


30 YEARS OF PUSHING THE ENVELOPE

dB/OCT

24

CROSSOVER SLOPE

YEAR

OHMS

YEAR

2 1 2/1 LIMITED WARRANTY

FREE* EXTENDED WARRANTY

IMPEDANCE STABILITY

PUNCH HAS REVOLTIONIZED THE INDUSTRY

dB/OCT

12

CROSSOVER SLOPE

YEAR

OHMS

YEAR

1 1 4/2 LIMITED WARRANTY

FREE* EXTENDED WARRANTY

IMPEDANCE STABILITY

BREAKING NEW GROUND IN PERFORMANCE & VALUE

LIMITED WARRANTY

OHMS

YEAR

dB/OCT

12 1 4/2

CROSSOVER SLOPE

IMPEDANCE STABILITY

*WITH QUALIFYING ROCKFORD FOSGATE INSTALLATION KIT PURCHASE


500WATTS 1000WATTS 1500WATTS 2500WATTS

400WATTS 600WATTS

400WATTS 600WATTS 800WATTS 1000WATTS


300WATTS 400WATTS 500WATTS 1000WATTS

9

2013 BUYERS GUIDE

300WATTS 400WATTS 500WATTS 1000WATTS

400WATTS 600WATTS

1000WATTS


300WATTS 500WATTS

300WATTS

300WATTS

BOOSTED RAIL


11 2013 BUYERS GUIDE


250WATTS 500WATTS 750WATTS 1200WATTS

150WATTS

250WATTS 300WATTS 400WATTS 600WATTS

600WATTS


PROPRIETARY

ROCKFORD TECHNOLOGY

When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has lead us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and make it Rockford.

+20 +18 +16 +14 +12

PUNCH EQUALIZATION

+10

U.S. Patent (21,323)

+8 +6 +4 +2 -0 -2

20

50

100

200

500

BASS

Hz

1k

2k

5k

10k 20k

TREBLE

In the early 70’s, Jim Fosgate studied the acoustical properties of automobiles by using a real time analyzer. Jim discovered multiple problems common in all vehicles; a midbass hump, a steep high frequency roll off and reduced bass response. This research lead to adding Punch EQ to Rockford Fosgate amps to help correct the acoustical deficiencies found in the automotive listening environment. The new Punch EQ2 is an on-board equalization circuit that when set to Low-Pass (LP) operation, becomes a variable Bass Boost. When set to High-Pass (HP) operation, it acts as a variable Mid-Bass and Treble Boost. When set to All Pass (AP) operation, both Bass and Treble frequencies are boosted. Products Featuring on-board PUNCH EQ

HEATSINK

ALUMINIUM

MOSFET

THERMAL GREASE CERAMIC

MAXIMUM EFFICIENCY HEAT SINK APPLICATION MEHSA3 heat management technology takes heat sink efficiency to a new level. The key was to create a dielectric layer between the ceramic topside and the aluminum base that retains all of the electrical isolation and capacitive coupling of the early material increasing its thermal conductivity. The higher power handling results in a 20% reduction in thermal impedance.

Products Featuring MEHSA

4/2/1 The ability to deliver continuous total RMS rated power to the speaker(s) in any impedance ranging between 4 ohm through 1 ohm.

Products Featuring 4/2/1

YOUTUBE.COM/ROCKFORDFOSGATE WATCH DETAILED VIDEOS ON OUR AMPLIFIER TECHNOLOGIES.

13 2013 BUYERS GUIDE


T2500-1bdCP

WITH

WITHOUT

Output Power

4000

CONSTANT POWER

3500

U.S. Patent (7,994,857)

3000

2500

Frequency

240

220

200

180

160

140

120

80

100

60

40

20

2000

Music and speakers have a dynamic relationship. As the frequency of music varies, so does the impedance of the speaker. Rockford Fosgate’s Constant Power circuit design actively monitors and increases voltage and current as the speaker’s impedance rises with music. Resulting in up to a 25% increase in total amplifier power.

Products Featuring CONSTANT POWER

DYNAMIC THERMAL MANAGEMENT THERMAL IMAGE WITHOUT

Our engineers at Rockford Fosgate have developed an award winning cooling design called Thermal Management). This patent pending design seamlessly manages the output and power supply temperatures, while evenly distributing the excess heat across the entire amplifier.

T H E R M A DTM L I M A G(Dynamic E WITH

Products Featuring DTM

HERMAL IMAGE WITHOUT

THERMAL IMAGE WITH

NON MULTIPLYING ADVANCED DECISION Safe output protection is handled by our proprietary NOMAD circuit. NOMAD is an analog computer designed to calculate the maximum level of safe current allowable for each output device (based on their instantaneous voltage drop). This allows the protection to be much more precise than ever before; offering protection against: • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

Products Featuring NOMAD

CEA-2006 Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier’s output power ratings are REAL POWER numbers, not inflated marketing ratings.

Products Compliant with CEA-2006

C.L.E.A.N. Time and sophisticated test equipment have been replaced, with Rockford’s integrated level setting technology called CLEAN (Calibrated Level Eliminates Audible Noise). Using simple LED indicators to identify both signal clipping from the audio source and the output level clipping to the speakers. This precise level set-up eliminates speaker damaging distortion.

Products Featuring CLEAN


AMPLIFIER PERFORMANCELINEUP TOPOLOGIESEXPLAINED -

Amplifier topology is the arrangement of parts in an amplifier design. These designs are broken out into ‘classes’. Each class has tradeoffs, making the various classes suited for various applications…like Class D or BD with higher RMS power, but undesirable noise in the higher frequencies making it better suited to power subwoofers.

CLASS BD (Patent RE40550) -The Rockford Fosgate bd topology is more efficient than typical class AB and has lower distortion than class D designs. Rockford bd amplifiers are 75-80% efficient vs. 20-60% efficient class ab amplifiers. Delivering more power from your amplifier with less drain on your vehicles electrical and charging system. CLASS AD -The Rockford Fosgate ad topology brings

our high efficiency bd amplifier design to a full range application. Using our Dynamic Frequency Switching to increase the switching frequency during lower output levels for better signal resolution. Coupled with Post Choke Feedback Filtering to compare the input signal to the output signal at the speaker connector removing any unwanted distortion. These technologies eliminate the inherent switching noise associated with typical class D designs.

CLASS D -High efficiency amplifier design that reduces current consumption from the charging system

CLASS TA -The trans•ana topology operates the

output stage with its full voltage gain, which allows the input stage to operate from a low voltage regulated supply. The signal is then shifted up in level to the high voltage section by the driver stage which forms an active node at ultrasonic frequencies. This results in a very stable, highly linear operation.

CLASS BR (Patent 8,212,620) -To achieve higher efficiency with lower distortion, Rockford’s br topology combines, Cycle-by-Cycle, an indirectly coupled high/ low voltage rail linear topology with a switched high/low voltage linear rail topology. This combination yields an unsurpassed power density (watts per cubic inch). CLASS AB -The combination of a class B power output with the class A low distortion attributes make class AB the most common amplifier topology in the electronics industry.

FULL RANGE CLASS D -High efficiency

amplifier design that reduces current consumption from the charging system

EFFICIENCY

RMS

CLASS

1 CHANNEL

500-2500watts

500-1000watts

500-1200watts

85%

85%

90%

amplifier cross sections show the amount of heatsink material (Thermal Mass). A greater thermal mass means increased play THERMAL MASS PER INCH - These time and lower device distortion.

326 GRAMS 15 2013 BUYERS GUIDE

299 GRAMS


CLASS RMS EFFICIENCY

150-300watts

70%

70%

68%

RMS

400-600watts

85%

85% 1CH / 2CH / 4CH

RMS

CLASS

EFFICIENCY

800-1000watts

EFFICIENCY

300-500watts

73% 101 GRAMS

BOOSTED RAIL

1CH / 2CH / 4CH

CLASS

300-1000watts

1CH / 2CH / 4CH

400-600watts

137 GRAMS


of a amplifier Organizing the combination of parts that make up the guts of an amplifier tremendously impacts their performance capabilities. A change in topology type matched with a variation of power supply components deliver a higher power output and enhanced audio quality. Rockford’s proprietary amplifier topologies and electrical technologies in our amplifier lineup will drive your system to new heights.

HEAT SINK MOSFETS POWER SUPPLY

CIRCUIT BOARD

TERMINALS

MATERIAL HIEARCHY

RCA

BESt

Heat Sink - This heavy outer shell protects the parts inside by transferring away the heat made reproducing an audio signal (music).

MOSFETs - A type of transistor used to amplify audio signal(music). You’ll see more of these guys lined up as wattage demands increase.

Circuit Board - Sometimes referred to as the PCB, is used to connect this-to-that through tiny lines of copper across multiple layers of pathways.

Power Supply - A.K.A the transformer, as the name suggest it takes the incoming voltage and converts it to a useable voltage for speakers.

Terminals - These are the connection points for the speakers or subwoofers and the power source(battery) for the amplifier.

RCA - These are the connection points for the audio signal(music) coming from the audio source(radio). RCA connectors are most commonly used.

HEAT SINK

• Die-Cast Aluminum w/ DTM™ • Die-Cast Aluminum • Extruded Aluminum

GOOD

TERMINALS

• C-Clamp compression • Set-Screw • Molex; Set-Screw or Pigtail

RCA • Balanced Differential; HighLevel Capable with Auto Turn-On • Balanced Differential; HighLevel Capable • Balanced Differential


Die-Cast Aluminum w/ DTM™ C-Clamp compression Balanced Differential TO-247 MOSFETs w/ MEHSA™ Ferrite Core Coated/Booted Transformer, with CONSTANT POWER™ 4 layer 3 oz. Copper Circuit Board

Die-Cast Aluminum w/ DTM™ C-Clamp compression Balanced Differential TO-247 MOSFETs w/ MEHSA™ Ferrite Core Coated/Booted Transformer, with CONSTANT POWER™ 4 layer 3 oz. Copper Circuit Board

• • • •

MOSFETS

TO-247 MOSFETs w/ MEHSA™ TO-220 MOSFETs w/ MEHSA™ TO-220 MOSFETs TO-220 Bipolar Transistors

POWER SUPPLY • Ferrite Core Coated/Booted Transformer, with CONSTANT POWER™ • Ferrite Core Coated/Booted Transformer • Ferrite Core Transformer • Storage Capacitor

CIRCUIT BOARD • 4 layer 3 oz. Copper Circuit Board • 4 layer 2 oz. Copper Circuit Board • 2 layer 2 oz. Copper Circuit Board


Die-Cast Aluminum w/ DTM™ C-Clamp compression Balanced Differential; High-Level Capable with Auto Turn -On TO-220 MOSFETs w/ MEHSA™ Ferrite Core Coated/Booted Transformer POWER™ 4 layer 2 oz. Copper Circuit Board

Extruded Aluminum Molex; Set-Screw or Pigtail Balanced Differential; High-Level Capable with Auto Turn -On TO-220 MOSFETs w/ MEHSA™ Storage Capacitor

MATERIAL HIEARCHY

4 layer 2 oz. Copper Circuit Board

BESt

HEAT SINK

• Die-Cast Aluminum w/ DTM™ • Die-Cast Aluminum • Extruded Aluminum

GOOD

TERMINALS

• C-Clamp compression • Set-Screw • Molex; Set-Screw or Pigtail

RCA • Balanced Differential; HighLevel Capable with Auto Turn-On • Balanced Differential; HighLevel Capable • Balanced Differential


Die-Cast Aluminum Set-Screw Balanced Differential; High-Level Capable TO-220 Bipolar Transistors Ferrite Core Transformer 2 layer 2 oz. Copper Circuit Board

full range

Die-Cast Aluminum Set-Screw Balanced Differential TO-220 MOSFETs Ferrite Core Transformer 2 layer 2 oz. Copper Circuit Board

• • • •

MOSFETS

TO-247 MOSFETs w/ MEHSA™ TO-220 MOSFETs w/ MEHSA™ TO-220 MOSFETs TO-220 Bipolar Transistors

POWER SUPPLY • Ferrite Core Coated/Booted Transformer, with CONSTANT POWER™ • Ferrite Core Coated/Booted Transformer • Ferrite Core Transformer • Storage Capacitor

CIRCUIT BOARD • 4 layer 3 oz. Copper Circuit Board • 4 layer 2 oz. Copper Circuit Board • 2 layer 2 oz. Copper Circuit Board


S/N Ratio

Channel Separation

Dimensions

<0.05%

150mV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L11.41” (Small chassis)

T600-2

200x2 @ 4 ohms 300x2 @ 2 ohms 600x1 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L13.66” (Medium chassis)

T400-4

60x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L13.66” (Medium chassis)

T600-4

100x4 @ 4 ohms 150x4 @ 2 ohms 300x2 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L14.91” (Large chassis)

150x4 @ 4 ohms 150x4 @ 2 ohms 200x4 @ 1 ohm 300x2 @ 4 ohms bridged 400x2 @ 2 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 5V

>95dB

>50dB

T800-4ad

H 2.14” x W 8.14” x L13.66” (Medium chassis)

Class ad w/ Constant Power

20Hz - 20kHz

<1.0%

150mV - 5V

>95dB

>50dB

T1000-4ad

250x4 @ 4 ohms 250x4 @ 2 ohms 250x4 @ 1 ohm 500x2 @ 4 ohms bridged 500x2 @ 2 ohms bridged

H 2.14” x W 8.14” x L14.91” (Large chassis)

Class ad w/ Constant Power and 4/2/1

T500-1bdCP

300x1 @ 4 ohms 500x1 @ 2 ohms 500x1 @ 1 ohm

20Hz - 250Hz

<0.5%

150mV - 5V

>100dB

N/A

H 2.14” x W 8.14” x L11.41” (Small chassis)

T1000-1bdCP

700x1 @ 4 ohms 1000x1 @ 2 ohms 1000x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

H 2.14” x W 8.14” x L13.66” ( Medium c hassis)

T1500-1bdCP

1000x1 @ 4 ohms 1500x1 @ 2 ohms 1500x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

H 2.14” x W 8.14” x L14.91” (Large chassis)

1500x1 @ 4 ohms 2500x1 @ 2 ohms 2500x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

H 2.14” x W 8.14” x L21.9” (X-Large chassis)

P300X2

100x2 @ 4 ohms 150x2 @ 2 ohms 300x1 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 9.9” (Mini chassis)

P400X2

125x2 @ 4 ohms 200x2 @ 2 ohms 400x1 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 11.0” (Small chassis)

P500X2

150x2 @ 4 ohms 250x2 @ 2 ohms 500x1 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 13.3” (Medium chassis)

P1000X2

300x2 @ 4 ohms 500x2 @ 2 ohms 1000x1 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 15.0” (Large chassis)

P400X4

50x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 11.0” (Small chassis)

60x4 @ 4 ohms 125x4 @ 2 ohms 250x2 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 13.3” (Medium chassis)

75x4 + 200x1 @ 4 ohms 125x4 + 400x1 @ 2 ohms N/A + 500x1 @ 1 ohm

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

P300X1

200x1 @ 4 ohms 300x1 @ 2 ohms

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

P400X1

200x1 @ 4 ohms 400x1 @ 2 ohms

20Hz - 20kHz

<1.0%

150mV - 12V

P500X1bd

150x1 @ 4 ohms 300x1 @ 2 ohms 500x1 @ 1 ohm

20Hz - 250Hz

<1.0%

P1000X1bd

250x1 @ 4 ohms 500x1 @ 2 ohms 1000x1 @ 1 ohm

20Hz - 250Hz

100x2 @ 4 ohms 150x2 @ 2 ohms 300x1 @ 4 ohms bridged

T2500-1bdCP

P500X4

P1000X5

PBR300X2

PBR300X4 PBR300X1

PBR500X1

TRANS•ana

Variable Crossover

Input Sensitivity

20Hz - 20kHz

Circuit Board

THD+N @ Rated Power

120x2 @ 4 ohms 200x2 @ 2 ohms 400x1 @ 4 ohms bridged

Topology

Frequency Response

Rated Power

AMPLIFIER SPECIFICATIONS

T400-2

4 layer 3 oz. copper circuit board

24 dB/oct - variable High or Low Pass and All Pass

Class bd w/ Constant Power

4 layer 3 oz. copper circuit board

24 dB/oct - variable Low Pass

TRANS•ana

4 layer 2 oz. copper circuit board

12 dB/oct - variable High or Low Pass and All Pass

H 2.4” x W 7.8” x L 15.0” (Large chassis)

TRANS•ana & Class bd

4 layer 2 oz. copper circuit board

12 dB/oct - variable High or Low Pass and All Pass 12 dB/oct - fixed infrasonic

N/A

H 2.4” x W 7.8” x L 9.9” (Mini chassis)

TRANS•ana

4 layer 2 oz. copper circuit board

>105dB

N/A

H 2.4” x W 7.8” x L 9.9” (Mini chassis)

12 dB/oct - variable High or Low Pass and All Pass

150mV - 12V

>100dB

N/A

H 2.4” x W 7.8” x L 11.0” (Small chassis)

<1.0%

150mV - 12V

>100dB

N/A

H 2.4” x W 7.8” x L 13.3” (Medium chassis)

20Hz - 20kHz

<0.5%

150mV - 11V

>100dB

>50dB

H 1.5” x W 4.25” x L 6.75”

75x4 @ 4 ohms

20Hz - 20kHz

<0.5%

150mV - 11V

>100dB

>50dB

H 1.5” x W 4.25” x L 6.75”

75x1 @ 4 ohms 150x1 @ 2 ohms 300x1 @ 1 ohm

20Hz - 250Hz

<0.2%

150mV - 11V

>105dB

N/A

H 1.5” x W 4.25” x L 6.75”

175x1 @ 4 ohms 300x1 @ 2 ohms 500x1 @ 1 ohm

20Hz - 20kHz

<0.1%

150mV - 11V

>105dB

N/A

H 1.5” x W 4.25” x L 8.25”

Class bd

Class br

12 dB/oct - variable Low Pass

6 layer 2 oz. copper circuit board

12 dB/oct - 80Hz fixed High or Low Pass and All Pass

4 layer 2 oz. copper circuit board

12 dB/oct - variable Low Pass


Speaker Terminals

Additional Features

Focused mass die-cast heatsink / DTM™- Dynamic Thermal Management / MEHSA™- Maximum Efficiency HeatSink Application

Power Terminals

Status Indicators Discrete light pipe Power, Thermal and Protection indicators

RCA Inputs

Protection NOMAD circuit • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

Heatsink Design

Impedance Stability 1 ohm stereo / 2 ohm mono stable

Balanced differential RCA inputs and RCA pass thru

4 Ga. c-clamp compression connector

8 Ga. c-clamp compression connector

Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +12dB @ 12KHz with optional PEQ

Balanced differential RCA inputs and RCA pass thru

4 Ga. c-clamp compression connector

8 Ga. c-clamp compression connector

Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Equalization

Balanced differential panel mount RCA and RCA pass thru

stealth proprietary 1/0 Ga. 4mm allen head set-screw cast zinc connector

stealth proprietary 8 Ga. 4mm allen head set-screw cast zinc connector

Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Equalization and BDSync or Master/Slave

High level capable with auto turn-on balanced differential RCA inputs and RCA pass thru

4 Ga. c-clamp compression connector

8 Ga. c-clamp compression connector

Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +14dB @ 12.5KHz with optional Punch Level Control(PLC2)

Differential RCA inputs

Differential RCA inputs and RCA pass thru Focused mass die-cast heatsink / 4-Point Thermal Monitoring / MEHSA™- Maximum Efficiency HeatSink Application

Differential RCA inputs

Differential RCA inputs and RCA pass thru

1 ohm mono rated

NOMAD circuit • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

Discrete light pipe Power, Thermal and Protection indicators

Focused mass die-cast heatsink / DTM™- Dynamic Thermal Management / MEHSA™- Maximum Efficiency HeatSink Application

Discrete light pipe Power, Thermal and Protection indicators / In Mold Roll LED backlit signal/power Volume Units meters 2 ohm stereo / 4 ohm mono rated

NOMAD circuit • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

Discrete light pipe Power, Thermal and Protection indicators

Focused mass die-cast heatsink / DTM™- Dynamic Thermal Management / MEHSA™- Maximum Efficiency HeatSink Application

High level capable with auto turn-on balanced differential RCA inputs High level capable with auto turn-on balanced differential RCA inputs and RCA pass thru 2 ohm stereo / 1 ohm mono rated

NOMAD circuit • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

Discrete light pipe Power, Thermal and Protection indicators

Focused mass die-cast heatsink / DTM™- Dynamic Thermal Management / MEHSA™- Maximum Efficiency HeatSink Application

High level capable with auto turn-on balanced differential RCA inputs

4 Ga. c-clamp compression connector

8 Ga. c-clamp compression connector

Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +14dB @ 12.5KHz with optional Punch Level Control(PLC2)

2 ohm mono rated

NOMAD circuit • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

Discrete light pipe Power, Thermal and Protection indicators

Focused mass die-cast heatsink / DTM™- Dynamic Thermal Management / MEHSA™- Maximum Efficiency HeatSink Application

High level capable with auto turn-on balanced differential RCA inputs and RCA pass thru

4 Ga. c-clamp compression connector

8 Ga. c-clamp compression connector

Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +14dB @ 12.5KHz with optional Punch Level Control(PLC2)

• Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

LED Power/Protection and boost mode indicators

Inter-locking extruded aluminum heatsinks w/ pierced metal recessed badge

RCA/Speaker level pigtailed Molex connector with auto turn-on

10 Ga. Molex connector

16 Ga. pigtailed Molex connector

Optional PEQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +12dB @ 12KHz, variable highlevel adjust and 6V DC offset w/ remote out

1 ohm mono rated

2 ohm stereo / 4 ohm mono rated

4 ohm stereo ONLY

Variable high-level adjust and 6V DC offset w/ remote out

1 ohm mono rated

Optional PEQ Variable from 0dB to +18dB @ 45Hz, variable high-level adjust and 6V DC offset w/ remote out

8 Ga. Molex connector

12 Ga. pigtailed Molex connector


S/N Ratio

Channel Separation

<1.0%

150mV - 12V

>100dB

>50dB

R250X4

40x4 @ 4 ohms 60x4 @ 2 ohms 125x2 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>100dB

>50dB

H 2.0” x W 6.8” x L 11.2”

R300X4

50x4 @ 4 ohms 75x4 @ 2 ohms 150x2 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>100dB

>50dB

H 2.0” x W 6.8” x L 13.2”

R400-4D

75x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 5V

>90dB

>50dB

H 2.0” x W 6.8” x L 9.1”

R600-4D

100x4 @ 4 ohms 150x4 @ 2 ohms 300x2 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 5V

>90dB

>50dB

H 2.0” x W 6.8” x L 11.1”

50x4 + 200x1 @ 4 ohms 75x4 + 300x1 @ 2 ohms 150x2 + N/A @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>100dB

>50dB

R250X1

150x1 @ 4 ohms 250x1 @ 2 ohms

20Hz - 250Hz

<1.0%

150mV - 12V

>100dB

R500X1D

300x1 @ 4 ohms 500x1 @ 2 ohms

20Hz - 250Hz

<1.0%

150mV - 12V

R750-1D

250x1 @ 4 ohms 500x1 @ 2 ohms 750x1 @ 1 ohm

20Hz - 250Hz

<1.0%

R1200-1D

400x1 @ 4 ohms 800x1 @ 2 ohms 1200x1 @ 1 ohm

20Hz - 250Hz

<1.0%

R600X5

23 2013 BUYERS GUIDE

Circuit Board

Input Sensitivity

20Hz - 20kHz

H 2.0” x W 6.8” x L 11.2”

Class ab

Single layer 2 oz. copper circuit board

Full Range Class d

4 layer 2 oz. copper circuit board

H 2.0” x W 6.8” x L 13.2”

Class ab & Class d

Single layer 2 oz. copper circuit board

12 dB/oct - variable High or Low Pass and All Pass

N/A

H 2.0” x W 6.8” x L 11.2”

Class ab

Single layer 2 oz. copper circuit board

12 dB/oct - variable Low Pass

>100dB

N/A

H 2.0” x W 6.8” x L 8.5”

Class d

150mV - 4V

>100dB

N/A

H 2.0” x W 6.8” x L 9.1”

4 layer 2 oz. copper circuit board

150mV - 4V

>100dB

N/A

H 2.0” x W 6.8” x L 11.1”

12 dB/oct - variable Low Pass 12 dB/oct - variable infrasonic

Variable Crossover

Topology

THD+N @ Rated Power

50x2 @ 4 ohms 75x2 @ 2 ohms 150x1 @ 4 ohms bridged

Dimensions

Frequency Response

Rated Power R150X2

12 dB/oct - variable High or Low Pass and All Pass


Speaker Terminals

Additional Features

Focused mass die-cast heatsink

Power Terminals

Status Indicators LED Power and Protection indicators

RCA Inputs

Protection • Short Circuit • Thermal

Heatsink Design

Impedance Stability 2 ohm stereo / 4 ohm mono rated

RCA or speaker level pigtailed Molex connector input and RCA pass thru

4 Ga. set-screw connector

10 Ga. set-screw connector

Punch EQ variable from 0dB to +12dB @ 45Hz

RCA input or speaker level pigtailed Molex connector input

Punch EQ selectable from 0dB/+6dB/+12dB @ 45Hz

RCA input and RCA pass thru

Punch EQ variable from 0dB to +18dB @ 45Hz

2 ohm stereo / 4 ohm mono rated(Front/Rear) and 2 ohm mono rated(Sub)

• Short Circuit • Thermal

LED Power and Protection indicators

Focused mass die-cast heatsink

RCA input or speaker level pigtailed Molex connector input

4 Ga. set-screw connector

10 Ga. set-screw connector

Punch EQ selectable from 0dB/+6dB/+12dB @ 45Hz(Front/Rear) and Variable from 0dB to +12dB @ 45Hz(Sub)

2 ohm mono rated

• Short Circuit • Thermal

LED Power and Protection indicators

Focused mass die-cast heatsink

RCA or speaker level pigtailed Molex connector input and RCA pass thru

4 Ga. set-screw connector

10 Ga. set-screw connector

Punch EQ variable from 0dB to +12dB @ 45Hz and included Punch Level Control(PLC)

1 ohm mono rated

RCA input and RCA pass thru

ROCKFORDFOSGATE.COM Don’t forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Amp Wire Calculator to optimize output with properly sized wire.

Punch EQ variable from 0dB to +18dB @ 45Hz and included Punch Level Control(PLC)


SUBWOOFER


WE’VE RAISED THE BAR...AGAIN

YEAR

WATTS

1200 ” 1 4 44

UP TO RMS POWER HANDLING

LIMITED WARRANTY

M M

VOICE COIL

XMAX PEAK TO PEAK

DON’T JUST REACH YOUR SYSTEM’S POTENTIAL

YEAR

WATTS

600 ” 1 2.5 28

UP TO RMS POWER HANDLING

LIMITED WARRANTY

VOICE COIL

M M

XMAX PEAK TO PEAK

PERFECT STEP INTO PERFORMANCE AUDIO

YEAR

WATTS

250 ” 1 2 13 LIMITED WARRANTY

M M

UP TO RMS POWER HANDLING

VOICE COIL

XMAX PEAK TO PEAK


27 2013 BUYERS GUIDE

T0 Subwoofers include an intergrated/removable grille.

T1 Subwoofers include an intergrated/removable grille.

DUAL 2Ω DUAL 4Ω

DUAL 2Ω DUAL 4Ω

DUAL 2Ω DUAL 4Ω


DUAL 2立 DUAL 4立

29 2013 BUYERS GUIDE

DUAL 2立 DUAL 4立


OPTIONAL

ENCLOSURE and / or GRILLE

Optional integrated grille available for ALL PUNCH subwoofers. Loaded encolsures available for all 10” or 12” PUNCH subwoofers and 8”, 10” or 12” PUNCH SHALLOW subwoofers.

SINGLE 2Ω SINGLE 4Ω

DUAL 2Ω DUAL 4Ω SHALLOW


31 2013 BUYERS GUIDE


DUAL 2Ω DUAL 4Ω

SINGLE 4Ω

OPTIONAL ENCLOSURE Loaded encolsures available for all 10” or 12” PRIME R1 and R2 Shallow subwoofers.

DUAL 2Ω DUAL 4Ω SHALLOW


PROPRIETARY

ROCKFORD TECHNOLOGY

When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has lead us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and make it Rockford.

VERTICAL ATTACH SURROUND TECHNIQUE Rockfordâ&#x20AC;&#x2122;s proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective radiating cone area without complicated installation issues. This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing) which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved. Products Featuring VAST SHALLOW

SHALLOW

FLEX FIT The slot mounted frame pattern of the Flex Fit basket utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted. Products Featuring FLEX FIT SHALLOW

SHALLOW

YOUTUBE.COM/ROCKFORDFOSGATE WATCH DETAILED VIDEOS ON OUR SUBWOOFER TECHNOLOGIES.

33 2013 BUYERS GUIDE


SELECTABLE WOOFER IMPEDANCE FUSED TERMINATION Removing and inverting the center plug allows nominal impedance of voice coils to quickly be configured in a Series or Parallel wiring configuration. This removable impedance selection jumper also provides fused protection in severe overload conditions. Products Featuring SWIFT SHALLOW

SHALLOW

INDUCTIVE DAMPING HEAT SINK Secures directly to the top of magnet structure to improve system efficiency by reducing both distortion and back EMF (Electo-magnetic force). Also radiates heat to reduce voice coil temperature. Products Featuring IDHS SHALLOW

SHALLOW

CEA-2031 Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous demand, not instantaneous power handling that over time can damage voice coils. Products Compliant with CEA SHALLOW

SHALLOW

VERIFIED WITH KLIPPEL To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be trained and certified by Klippel prior to using the three separate Klippel systems to design, develop and test. • • •

Klippel DA-2 (Designed) Klippel PM-8 (Developed) Klippel QC (Tested)

Products Verified with KLIPPEL SHALLOW

SHALLOW


SUBWOOFER PERFORMANCE LINEUP SPL - Sound Pressure Level numbers reflect an incar response utilizing dual subwoofers in a typical sedan size cabin at peak power.

SPL XMAX

OUTWARD EXCURSION

PEAK POWER

Sound Pressure Level

148dB Sound Pressure Level

144dB Sound Pressure Level

140dB Sound Pressure Level

137dB 35 2013 BUYERS GUIDE

REST

=

INWARD EXCURSION

XMAX - The measured excursion of the subwoofer in one direction, with Peak-to-Peak covering its entire travel. The more air a woofer moves the higher the SPL. PEAK POWER - The maximum amount of amplifier power that can be applied to a subwoofer prior to entering into an unsafe operating scenario.

PEAK POWER

X-MAX PEAK TO PEAK

PEAK POWER

X-MAX PEAK TO PEAK

PEAK POWER

X-MAX PEAK TO PEAK

PEAK POWER

X-MAX PEAK TO PEAK


Sound Pressure Level

135dB Sound Pressure Level

133dB Sound Pressure Level

132dB Sound Pressure Level

129dB

PEAK POWER

X-MAX PEAK TO PEAK

PEAK POWER

X-MAX PEAK TO PEAK

PEAK POWER

X-MAX PEAK TO PEAK

PEAK POWER

X-MAX PEAK TO PEAK

S H A L L O W Sound Pressure Level

133dB SHALLOW

Sound Pressure Level

130dB SHALLOW

PEAK POWER

X-MAX PEAK TO PEAK

PEAK POWER

X-MAX PEAK TO PEAK


of a subwoofer Variations in the anatomy of a subwoofer dramatically changes their performance characteristics. An increase in voicecoil size coupled with a stronger cone material yields a higher power handling and increased output. By combining quality materials with Rockford’s proprietary acoustic technologies, our subwoofer lineup is sure to meet your system’s demands. SURROUND CONE

BASKET SPIDER VOICE COIL

MATERIAL HIEARCHY

MAGNET

BESt

GOOD

Basket - Also referred to as the frame or chassis, this is the skeletal system of the speaker. Here to keep everything in its place.

Surround - First part in the speakers suspension, attached to the cone to maintain the centering of the voice coil in the magnetic gap.

Spider - Second part of the speakers suspension, connects the cone and voice coil to the basket and controls the travel of the cone assembly.

Cone - A.K.A the diaphragm, this is the voice of the speaker. Shape and material dramatically change tonality.

Voice Coil - The brains of the operation, directing the force from the magnet to push or pull based on the applied electrical signal.

Magnet - The heart of speaker, creating the force to push and pull cone assembly. Size, material, and design may differ, depending on performance goals.

SURROUND

• Tall Profile, Santoprene™ w/ VAST™ • M-Roll, Santoprene™ w/ VAST™ • Tall Profile, Santoprene™ • Half-Roll, Nitrile Butadiene Rubber • Half-Roll, Sealed Polyetherester Foam

CONE

• Hard Anodized Aluminum • Kevlar Fiber Paper w/ Hard Anodized Aluminum dustcap • Kevlar Fiber Paper • Injection Molded Polypropylene • Polypropylene

SPIDER

• Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents • Dual Laminated w/ Embedded Lead Wire Cooling Vents • Single w/ Stitched Lead Wire and Cooling Vents • Single Spider


Tall Profile, Santoprene™ Hard Anodized Aluminum Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents 4” 4-Layer High Temp. Aluminum w/ NomexTM collar Die Cast Aluminum Triple Stack Ferrite Magnet w/ IDHSTM

Tall Profile, Santoprene™ w/ VAST™ Kevlar Fiber Paper/ Hard Anodized Aluminum Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents 3” 4-Layer High Temp.Aluminum w/ NomexTM collar Die-Cast Aluminum w/ FlexFitTM Double Stack Ferrite Magnet w/ IDHSTM

VOICE COIL

• 4” 4-Layer High Temp. Aluminum w/ NomexTM collar • 3” 4-Layer High Temp. Aluminum w/ NomexTM collar • 2.50” 4-Layer High Temp. Aluminum w/ NomexTM collar • 2.25” 4-Layer High Temp. Aluminum w/ NomexTM collar • 2” 4-Layer High Temp. Aluminum w/ NomexTM collar

BASKET

• Die-Cast Aluminum w/ FlexFitTM • Die-Cast Aluminum • StampCastTM w/ FlexFitTM • Stamped Steel

MAGNET

• Triple Stack Ferrite Magnet w/ IDHSTM • Double Stack Ferrite Magnet w/ IDHSTM • Double Stack Ferrite Magnet • Single Ferrite Magnet


Tall Profile, Santoprene™ w/ VAST™ Kevlar Fiber Paper/ Hard Anodized Aluminum Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents 3” 4-Layer High Temp. Aluminum w/ NomexTM collar Die-Cast Aluminum w/ FlexFitTM Double Stack Ferrite Magnet

Tall Profile, Santoprene™ w/ VAST™ Hard Anodized Aluminum Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents 2.50” 4-Layer High Temp. Aluminum w/ NomexTM collar StampCastTM w/ FlexFitTM

MATERIAL HIEARCHY

Double Stack Ferrite Magnet

BESt

GOOD

SURROUND

• Tall Profile, Santoprene™ w/ VAST™ • M-Roll, Santoprene™ w/ VAST™ • Tall Profile, Santoprene™ • Half-Roll, Nitrile Butadiene Rubber • Half-Roll, Sealed Polyetherester Foam

CONE

• Hard Anodized Aluminum • Kevlar Fiber Paper w/ Hard Anodized Aluminum dustcap • Kevlar Fiber Paper • Injection Molded Polypropylene • Polypropylene

SPIDER

• Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents • Dual Laminated w/ Embedded Lead Wire Cooling Vents • Single w/ Stitched Lead Wire and Cooling Vents • Single Spider


Tall Profile, Santoprene™ w/ VAST™ Kevlar Fiber Paper Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents 2.25” 4-Layer High Temp. Aluminum w/ NomexTM collar StampCastTM w/ FlexFitTM Double Stack Ferrite Magnet

Half-Roll, Nitrile Butadiene Rubber Kevlar Fiber Paper Single Stitched Lead Wire and Cooling Vents 2” 4-Layer High Temp. Aluminum w/ NomexTM collar StampCastTM w/ FlexFitTM Single Stack Ferrite Magnet

VOICE COIL

• 4” 4-Layer High Temp. Aluminum w/ NomexTM collar • 3” 4-Layer High Temp. Aluminum w/ NomexTM collar • 2.50” 4-Layer High Temp. Aluminum w/ NomexTM collar • 2.25” 4-Layer High Temp. Aluminum w/ NomexTM collar • 2” 4-Layer High Temp. Aluminum w/ NomexTM collar

BASKET

• Die-Cast Aluminum w/ FlexFitTM • Die-Cast Aluminum • StampCastTM w/ FlexFitTM • Stamped Steel

MAGNET

• Triple Stack Ferrite Magnet w/ IDHSTM • Double Stack Ferrite Magnet w/ IDHSTM • Double Stack Ferrite Magnet • Single Ferrite Magnet


Half-Roll, Sealed Polyether-ester Foam Polypropylene Single Spider 2” 4-Layer High Temp. Aluminum w/ NomexTM collar Stamped Steel Single Ferrite Magnet

Half-Roll, Nitrile Butadiene Rubber Polypropylene Single Spider 2” 4-Layer High Temp. Aluminum w/ NomexTM collar StampCast

MATERIAL HIEARCHY

Single Ferrite Magnet

BESt

GOOD

SURROUND

• Tall Profile, Santoprene™ w/ VAST™ • M-Roll, Santoprene™ w/ VAST™ • Tall Profile, Santoprene™ • Half-Roll, Nitrile Butadiene Rubber • Half-Roll, Sealed Polyetherester Foam

CONE

• Hard Anodized Aluminum • Kevlar Fiber Paper w/ Hard Anodized Aluminum dustcap • Kevlar Fiber Paper • Injection Molded Polypropylene • Polypropylene

SPIDER

• Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents • Dual Laminated w/ Embedded Lead Wire Cooling Vents • Single w/ Stitched Lead Wire and Cooling Vents • Single Spider


SHALLOW

M-Roll, Santoprene™ w/ VAST™ Hard Anodized Aluminum Dual Laminated w/ Embedded Lead Wire and Cooling Vents 2.50” 4-Layer High Temp. Aluminum w/ NomexTM collar StampCastTM w/ FlexFitTM Single Ferrite Magnet

SHALLOW

Half-Roll, Sealed Polyether-ester Foam Injection Molded Polypropylene Single Spider 2” 4-Layer High Temp. Aluminum w/ NomexTM collar Stamped Steal Single Ferrite Magnet

VOICE COIL

• 4” 4-Layer High Temp. Aluminum w/ NomexTM collar • 3” 4-Layer High Temp. Aluminum w/ NomexTM collar • 2.50” 4-Layer High Temp. Aluminum w/ NomexTM collar • 2.25” 4-Layer High Temp. Aluminum w/ NomexTM collar • 2” 4-Layer High Temp. Aluminum w/ NomexTM collar

BASKET

• Die-Cast Aluminum w/ FlexFitTM • Die-Cast Aluminum • StampCastTM w/ FlexFitTM • Stamped Steel

MAGNET

• Triple Stack Ferrite Magnet w/ IDHSTM • Double Stack Ferrite Magnet w/ IDHSTM • Double Stack Ferrite Magnet • Single Ferrite Magnet


Sensitivity

RMS Power Handling (watts)

Peak Power Handling (watts)

Mounting Diameter

Mounting Depth

Speaker Displacement (cu. ft.)

Sealed Enclosure (cu. ft.)

22.08

85 dB

1200

2400

10.8"

9.0"

0.151

N/A

T2D215/T2D415

15”

Dual 2 Ω or 4 Ω

22.0

87 dB

1200

2400

13.94"

10.0"

0.176

N/A

2.75 cu ft. Port: (1) 6”x17”

T1D210/T1D410

10”

Dual 2 Ω or 4 Ω

16.4

83 dB

600

1200

9.13"

6.5"

0.203

0.75

1.50 cu ft. Port: (1) 4”x11”

T1D212/T1D412

12”

Dual 2 Ω or 4 Ω

16.4

86 dB

800

1600

11.25"

6.9"

0.308

1.25

1.75 cu ft. Port: (1) 4”x9”

T1D215/T1D415

15”

Dual 2 Ω or 4 Ω

16.4

88 dB

1000

2000

13.94"

8.4"

0.547

2.25

2.66 cu ft. Port: (1) 4”x10”

T0D210/T0D410

10”

Dual 2 Ω or 4 Ω

14.8

81 dB

550

1100

9.13"

6.5"

0.203

0.75

1.50 cu ft. Port: (1) 4”x11”

T0D212/T0D412

12”

Dual 2 Ω or 4 Ω

14.8

84 dB

700

1400

11.25"

6.9"

0.308

1.25

1.75 cu ft. Port: (1) 4”x9”

T0D215/T0D415

15”

Dual 2 Ω or 4 Ω

14.8

87 dB

800

1600

13.94"

8.4"

0.547

2.25

2.66 cu ft. Port: (1) 4”x10”

P3D2-10/P3D4-10

10”

Dual 2 Ω or 4 Ω

13.9

82 dB

500

1000

9.13"

6.2"

0.127

0.59

1.40 cu ft. Port: (1) 4”x14”

P3D2-12/P3D4-12

12”

Dual 2 Ω or 4 Ω

13.9

85 dB

600

1200

11.25"

6.7"

0.194

1.02

1.79 cu ft. Port: (1) 4”x10”

P3D2-15/P3D4-15

15”

Dual 2 Ω or 4 Ω

13.9

86 dB

600

1200

13.94"

7.6"

0.247

1.58

2.66 cu ft. Port: (1) 4”x10”

8”

Dual 2 Ω or 4 Ω

7.8

83 dB

250

500

7.13"

4.8"

0.071

0.23

0.65 cu ft. Port: (1) 2”x8”

P2D2-10/P2D4-10

10”

Dual 2 Ω or 4 Ω

11

84 dB

300

600

9.13"

5.9"

0.088

0.59

1.40 cu ft. Port: (1) 4”x14”

P2D2-12/P2D4-12

12”

Dual 2 Ω or 4 Ω

13.3

86 dB

400

800

11.25"

6.4"

0.170

1.02

1.79 cu ft. Port: (1) 4”x10”

P2D2-15/P2D4-15

15”

Dual 2 Ω or 4 Ω

13.3

86 dB

400

800

13.94"

7.3"

0.219

1.58

2.66 cu ft. Port: (1) 4”x10”

8”

Single 2 Ω or 4 Ω

7.6

83.5 dB

200

400

7.13"

4.4"

0.053

0.23

0.65 cu ft. Port: (1) 2”x6”

P1S2-10/P1S4-10

10”

Single 2 Ω or 4 Ω

9.4

85 dB

250

500

9.13"

5.3"

0.085

0.59

1.40 cu ft. Port: (1) 3”x8”

P1S2-12/P1S4-12

12”

Single 2 Ω or 4 Ω

9.4

86 dB

250

500

11.25"

6.0"

0.113

1.02

1.79 cu ft. Port: (1) 3”x6”

P1S2-15/P1S4-15

15”

Single 2 Ω or 4 Ω

9.4

87.5 dB

250

500

13.94"

7.0"

0.191

1.58

2.66 cu ft. Port: (1) 4”x8”

R2D2-10/R2D4-10

10”

Dual 2 Ω or 4 Ω

6.5

89 dB

250

500

9.13"

4.3"

0.101

0.59

1.40 cu ft. Port: (1) 4”x13”

R2D2-12/R2D4-12

12”

Dual 2 Ω or 4 Ω

6.5

87 dB

250

500

11.25"

5.1"

0.150

1.02

1.79 cu ft. Port: (1) 4”x9.3”

R1S410

10”

Single 4 Ω

5.8

86 dB

150

300

9.13"

4.6"

0.024

0.75

N/A

R1S412

12”

Single 4 Ω

6.3

87 dB

150

300

10.94"

5.0"

0.043

1.02

N/A

8”

Dual 2 Ω or 4 Ω

8.4

82 dB

150

300

7.13”

2.7”

0.040

0.25

0.75 cu ft. Port: (1) 3”x9”

P3SD2-10/P3SD4-10

10”

Dual 2 Ω or 4 Ω

8.4

83 dB

300

600

9.13”

3.5”

0.074

0.50

1.00 cu ft. Port: (1) 4”x12”

P3SD2-12/P3SD4-12

12”

Dual 2 Ω or 4 Ω

8.4

85 dB

400

800

11.25”

3.7”

0.086

1.00

1.25 cu ft. Port: (1) 4”x12”

R2SD2-10/R2SD4-10

10”

Dual 2 Ω or 4 Ω

8

83 dB

200

400

9.13"

3.4"

0.037

0.70

1.40 cu ft. Port: (1) 4”x13.7”

R2SD2-12/R2SD4-12

12”

Dual 2 Ω or 4 Ω

10

85 dB

250

500

11.25"

3.6"

0.039

0.90

1.79 cu ft. Port: (1) 4”x11.8”

P2D2-8/P2D4-8

P1S2-8/P1S4-8

P3SD2-8/P3SD4-8

Speaker Model

Nominal Impedance

RMS Power Handling

Peak Power Handling

Dimensions (HxWxD)

P3-2X12

(2) P3D4-12

1200 Watts

2400 Watts

15.125” x 33.875” x 15.75”

P3-1X12

(1) P3D2-12

600 Watts

1200 Watts

15.125” x 19.125” x 15.75”

P3-2X10

(2) P3D4-10

1000 Watts

2000 Watts

13.125” x 31.125” x 15.125”

Dustcap Material

Xmax (mm)

Dual 2 Ω or 4 Ω

Surround Material

Nominal Impedance

12”

Ported Enclosure

Speaker Size

SUBWOOFER SPECIFICATIONS SHALLOW

T2D212/T2D412

2.00 cu ft. Port: (3) 3”x12”

Tall profile, high density Santoprene™

Hard anodized aluminum

Tall profile, Santoprene™ with VAST™

Hard anodized aluminum

Tall profile, Santoprene™ with VAST™

Hard anodized aluminum

Tall profile, Santoprene™ with VAST™

Hard anodized aluminum

Tall profile, Santoprene™ with VAST™

Kevlar fiber reinforced semi-pressed paper

Half-roll, high density Nitrile Butadiene Rubber

Kevlar fiber reinforced semi-pressed paper

Half-roll, Sealed Polyether-ester foam

Polypropylene

Half-roll, Nitrile Butadiene Rubber

Polypropylene

M-roll, Santoprene™ with VAST™

Hard anodized aluminum

Half-roll, Sealed Polyether-ester foam

Injection molded Polypropylene

Speaker Model

Nominal Impedance

RMS Power Handling

Peak Power Handling

Dimensions (HxWxD)

P1-2X12

(2) P1S4-12

500 Watts

1000 Watts

15.125” x 33.875” x 15.75”

P1-1X12

(1) P1S4-12

250 Watts

500 Watts

15.125” x 19.125” x 15.75”

P1-2X10

(2) P1S4-10

500 Watts

1000 Watts

13.125” x 31.125” x 15.125”

P1-1X10

(1) P1S4-10

250 Watts

500 Watts

13.125” x 17.0” x 15.125”

P3-1X10

(1) P3D2-10

500 Watts

1000 Watts

13.125” x 17.0” x 15.125”

P2-2X12

(2) P2D4-12

800 Watts

1600 Watts

15.125” x 33.875” x 15.75”

R1L-1X10

(1) R1S410

150 Watts

300 Watts

12.0” x 15.825” x 12.25”

P2-1X12

(1) P2D2-12

400 Watts

800 Watts

15.125” x 19.125” x 15.75”

R1L-2X10

(2) R1S410

300 Watts

600 Watts

12.0” x 30.0” x 12.25”

P2-2X10

(2) P2D4-10

600 Watts

1200 Watts

13.125” x 31.125” x 15.125”

R1L-1X12

(1) R1S412

150 Watts

300 Watts

14.0” x 17.5” x 12.25”

P2-1X10

(1) P2D2-10

300 Watts

600 Watts

13.125” x 17.0” x 15.125”

R1L-2X12

(2) R1S412

300 Watts

600 Watts

14.0” x 33.75” x 12.25”

43 2013 BUYERS GUIDE


Motor Structure

Motor Cover

Terminal Connectors

Die-cast aluminum

Triple stack ferrite magnet with extended vented pole and bumped vented backplate with IDHS™

Die-cast motor cover/heat sink

Dual 8 Ga. custom insulated/isolated compression style

Reversible die-cast aluminum w/ Soft Touch paint

Kevlar® fiber reinforced semipressed paper

3" 4-layer ultra-high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents

Die-cast aluminum with FlexFit™

Double stack ferrite magnet with extended vented pole and bumped vented backplate with IDHS™

Frame integrated

Dual 10 Ga. proprietary SWIFT™ terminal

Reversible die-cast aluminum w/ Soft Touch paint and integrated/removable grille

Kevlar® fiber reinforced semipressed paper

3" 4-layer ultra-high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents

Die-cast aluminum with FlexFit™

Double stack ferrite magnet with extended vented pole and bumped vented backplate

Frame integrated

Dual 10 Ga. proprietary SWIFT™ terminal

Reversible die-cast aluminum w/ Soft Touch paint and integrated/removable grille

Hard anodized aluminum

2.5" 4-layer ultra-high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents

StampCast™ with FlexFit™

Double stack ferrite magnet with extended vented pole and bumped vented backplate.

Removable Semi-flexible Polyvinyl Chloride (PVC)

8 Ga. custom insulated/isolated compression style

Reversible die-cast aluminum w/ Soft Touch paint and optional integrated grille

Kevlar® fiber reinforced semipressed paper

2.25" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents

StampCast™ with FlexFit™

Double stack ferrite magnet structure with extended vented pole and bumped backplate.

Removable Semi-flexible Polyvinyl Chloride (PVC)

8 Ga. custom insulated/isolated compression style

Reversible die-cast aluminum w/ Soft Touch paint and optional integrated grille

Kevlar® fiber reinforced semipressed paper

2" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents.

StampCast™ with FlexFit™

Ferrite magnet structure with extended vented pole and bumped backplate.

Removable Semi-flexible Polyvinyl Chloride (PVC)

8 Ga. custom insulated/isolated compression style

Reversible Acrylonitrile Butadiene Styrene with optional integrated grille

Polypropylene

2" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and spider cooling vents.

Stamped steel

Ferrite magnet structure with extended vented pole and bumped backplate.

Removable Semi-flexible Polyvinyl Chloride (PVC)

Standard 10 Ga.

Integrated Polyvinyl Chloride trim ring

Polypropylene

2" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Tear & fatigue resistant poly-cotton spider

Stamped steel

Ferrite magnet structure with extended vented pole and bumped backplate.

Hard anodized aluminum

2.5” 4-layer ultra-high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Dual laminated, progressive roll tear & fatigue resistant poly-cotton spiders with embedded lead wire technique and proprietary spider cooling vents

StampCast™ with FlexFit™

Ferrite magnet structure with extended vented pole and bumped vented backplate.

Injection molded Polypropylene

2" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and spider cooling vents.

Stamped steel

Ferrite magnet structure with extended vented pole and bumped backplate.

Spider

Speaker Model

Nominal Impedance

RMS Power Handling

Peak Power Handling

Dimensions (HxWxD)

P3S-1X10

(1) P3SD2-10

300 Watts

600 Watts

13.5" x 19.0" x 5.3"/3.3"

P3S-1X12

(1) P3SD2-12

400 Watts

800 Watts

13.5" x 27.4" x 5.3"/3.3"

Trim Ring

Frame Structure

Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique

Voice Coil 4" 4-layer ultra-high temp. aluminum flat-wound voice coil with spun-laced Nomex™ insulating reinforcement collar

Cone Material Hard anodized aluminum

Standard 10 Ga.

Removable Semi-flexible Polyvinyl Chloride (PVC)

8 Ga. custom insulated/isolated compression style

Reversible die-cast aluminum w/ Soft Touch paint and optional grille

Standard 10 Ga.

Integrated Polyvinyl Chloride trim ring

Speaker Model

Nominal Impedance

RMS Power Handling

Peak Power Handling

Dimensions (HxWxD)

R2S-1X10

(1) R2SD4-10

200 Watts

400 Watts

13.5” x 19.0” x 5.3”/3.3”

R2S-1X12

(1) R2SD4-12

250 Watts

500 Watts

13.5” x 27.4” x 5.3”/3.3”

ROCKFORDFOSGATE.COM Don’t forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Woofer Box Advisor for optimized enclosure bass performance.


SPEAKERS


150 1

WATTS

ONCE YOU HEAR THEM...YOU’LL KNOW

UP TO RMS POWER HANDLING

YEAR

LIMITED WARRANTY

45 - 40 Hz

kHz

FREQUENCY RESPONSE

DON’T JUST LISTEN TO YOUR MUSIC, FEEL IT

YEAR

WATTS

75 1

UP TO RMS POWER HANDLING

LIMITED WARRANTY

60 - 24 Hz

kHz

FREQUENCY RESPONSE

THE PERFECT FACTORY SPEAKER REPLACEMENT

YEAR

WATTS

60 1

UP TO RMS POWER HANDLING

LIMITED WARRANTY

65 - 22 Hz

kHz

FREQUENCY RESPONSE


2WAY 6.5 Inch

COMPONENTS

2WAY 6.5 Inch

2WAY 6.5 Inch 5.25 Inch Tweeter Kit

2WAY 6.75 Inch 6.5 Inch 6.0 Inch 5.25 Inch Tweeter Kit 47 2013 BUYERS GUIDE


2WAY 6.75 Inch 6.5 Inch 6 Inch 5.25 Inch 4 Inch 2WAY 6x9 Inch 6x8 Inch 5x7 Inch 4x6 Inch 3WAY 6x9 Inch

COAXIALS


2WAY 6.75 Inch 6.5 Inch 6.0 Inch 5.25 Inch Tweeter Kit

49 2013 BUYERS GUIDE

COMPONENTS

3WAY 2WAY 6.5 Inch 4.0 Inch 6.75 Inch 6.0 Inch 3.5 Inch 5.25 Inch Tweeter Kit 2WAY 6x9 Inch 5x7 Inch 4x6 Inch

3WAY 6x8 Inch

4WAY 6x9 Inch

COAXIALS


HIGH OUTPUT EXTREME LEVELS OF MID TO HIGH RANGE WILL BE EXPERIENCED

SCENARIOS TO CONSIDER WHEN USING THIS PRODUCT: A superior sensitivity yields low power (Watts) requirements.

To all the Rockford Fosgate Fanatics we would like to introduce the speakers to accompany your two strapped T2500-1bdCP pushing (4) T2 15’s… the PUNCH PRO speakers are guaranteed to provide HIGH OUTPUT full range for extreme SQL (Sound Quantity Level) systems.

Their unique structure gives opportunity to an equally unique fitment. It is HIGHLY encouraged to incorporate a generous quantity of this product in one application for a preferred outcome.

CROSSOVER 4 ohm 8 ohm

TWEETER 1.5 Inch

MIDRANGE 6 Inch 8 Inch 10 Inch COMPONENTS


2WAY 6.75 Inch 6.5 Inch 6 Inch 5.25 Inch Tweeter Kit

COMPONENTS


2WAY 6.75 Inch 5.25 Inch 4 Inch 3WAY 6.5 Inch 2WAY 6x9 Inch 6x8 Inch 3WAY 6x9 Inch COAXIALS


PROPRIETARY

ROCKFORD TECHNOLOGY

When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has lead us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and make it Rockford.

VERTICAL ATTACH SURROUND TECHNIQUE Rockford’s proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective radiating cone area without complicated installation issues. This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing) which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved. Products Featuring VAST

FLEX FIT The slot mounted frame pattern of the Flex Fit basket utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted. Products Featuring FLEX FIT

RF LINK Rockford’s proprietary RF Link is a bus-power component connection system enabling integration and control of all RF Link equipped products. The use of this systems allows for the expansion of auxiliary controls and managed system turn on. Products Featuring RFLINK

YOUTUBE.COM/ROCKFORDFOSGATE WATCH DETAILED VIDEOS ON OUR SPEAKER TECHNOLOGIES.

53 2013 BUYERS GUIDE


DISCREET DUAL CLAMP Rockford’s proprietary tweeter mounting design provides concentric clamping pressure around the perimeter of the mounting hole, utilizing a single center screw. This applies balanced pressure to both faces of the mounting surface. From there, the tweeter simply snaps into place and is finished with a snap on trim ring. Products Featuring DDC

INDUCTIVE DAMPING HEAT SINK

Secures directly to the top of magnet structure to improve system efficiency by reducing both distortion and back EMF (Electo-magnetic force). Also radiates heat to reduce voice coil temperature. Products Featuring IDHS

INTEGRATED CONCEALED CROSSOVER The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier installation. Products Featuring IC

CEA-2031 Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous demand, not instantaneous power handling that over time can damage voice coils. Products Compliant with CEA-2031

VERIFIED WITH KLIPPEL To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be trained and certified by Klippel prior to using the three separate Klippel systems to design, develop and test. • • •

Klippel DA-2 (Designed) Klippel PM-8 (Developed) Klippel QC (Tested)

Products Verified with KLIPPEL


SPEAKER PERFORMANCELINEUP Accuracy Score - Is derived from calculating the magnitude deviations from the speakerâ&#x20AC;&#x2122;s frequency response against a reference flat magnitude. response.

ACCURACY SCORE FREQ. RESPONSE RANGE PEAK POWER

=

Accuracy Score

96

100

COMPONENTS

out of

100

Accuracy Score

85

out of

100

Accuracy Score

82

MID

HIGH

Peak Power - The maximum amount of amplifier power that can be applied to a speaker prior to entering into an unsafe operating scenario.

FREQUENCY RESPONSE RANGE

out of

Accuracy Score

91

BASS

Frequency Response Range - The frequency response range or width tells you how high or low the speaker plays.

out of

100

55 2013 BUYERS GUIDE

PEAK POWER

FREQUENCY RESPONSE RANGE

PEAK POWER

FREQUENCY RESPONSE RANGE

PEAK POWER

FREQUENCY RESPONSE RANGE

PEAK POWER


COAXIALS COMPONENTS COAXIALS COMPONENTS COAXIALS COMPONENTS

Accuracy Score

80

out of

100

Accuracy Score

79

out of

100

Accuracy Score

78

100

out of

100

Accuracy Score

72

out of

100

Accuracy Score

75

PEAK POWER

FREQUENCY RESPONSE RANGE

PEAK POWER

FREQUENCY RESPONSE RANGE

out of

Accuracy Score

73

FREQUENCY RESPONSE RANGE

out of

100

PEAK POWER

FREQUENCY RESPONSE RANGE

PEAK POWER

FREQUENCY RESPONSE RANGE

PEAK POWER

FREQUENCY RESPONSE RANGE

PEAK POWER


Modifications to the framework of a speaker significantly impact their sonic signature. Combining various materials will strengthen, add volume and resonate the music to a desired sound. By intertwining superior speaker designs with Rockford’s proprietary acoustic technologies in our speaker lineup we are sure to bring your music to life.

SURROUND

CONE

TWEETER

BASKET CROSSOVEr

MATERIAL HIEARCHY

MAGNET

BESt

GOOD

• • • •

Tweeter - Composed of the same parts as an speaker, surround, cone, voice coil, basket and magnet. Just on a smaller scale.

Cone - A.K.A the diaphragm, this is the voice of the speaker. Shape and material dramatically change tonality.

Crossover - Works like a switch board, directing the audio signal through caps, filters and switches to the appropriate speaker.

Basket - Also referred to as the frame or chassis, this is the skeletal system of the speaker. Here to keep everything in their place.

Surround - Works in harmony with the spider, attached to the cone to maintain the centering of the voice coil in the magnetic gap.

Magnet - The heart of speaker, creating the force to push and pull cone assembly. Size, material, and design may differ, depending on performance goals.

TWEETER

Liquid Crystal Polymer Fiber Aluminum Dome Treated Fabric Dome Plated Polyether Imide (PEI) Dome • Mylar Balanced Dome

CROSSOVER

• RFLink™ Equipped External Component Crossover w/ 1% Mil-Spec Parts • External Component Crossover w/ 5% (Tol) Parts • ICC™ Component Crossover w/ 5% (Tol) Parts • ICC™ Component Crossover w/ 10% (Tol) Parts • Integrated High-Pass Crossover

SURROUND

• Butyl rubber w/ VAST™ • Nitrile Butadiene Rubber w/ VAST™ • Nitrile Butadiene Rubber • W-Style, Treated Cloth • SPE Foam


1”(25mm) Liquid Crystal Polymer Fiber Ring Radiator Dome, Dual Neodymium Magnets w/ IDHS™, Low Resonant Chamber and DDC™ RFLink™ Equipped External Component Crossover w/ 1% Mil-Spec Parts and Inelligent Protection w/ Integrated/Remote Tuning Module Butyl Rubber w/ VAST™ Tri-laminate Liquid Crystal Polymer Fiber w/ Machined Copperphase Plug Die-Cast Aluminum w/ FlexFitTM Multi-Pole™ Dual Neodymium Magnet w/ IDHS™

1”(25mm) Liquid Crystal Polymer Fiber Dome w/ Neodymium Magnet and DDC™ External Audiophile Grade Component Crossover w/ 5% (Tol) Parts Butyl Rubber w/ VAST™ Woven Liquid Crystal Polymer Fiber Die-Cast Aluminum w/ FlexFitTM Neodymium Magnet w/ IDHS™

CONE

• Liquid Crystal Polymer Fiber • Injection Molded Polypropylene-carbon Fiber Blend • Injection Molded Mineral Filled Polypropylene • Vacuum Formed Polypropylene • Fiber Reinforced Paper

BASKET

• Die-Cast Aluminum w/ FlexFitTM • StampCastTM w/ FlexFitTM • Stamped Steel

MAGNET

• Multi-pole™ Dual Neodymium Magnet w/ IDHS™ • Neodymium Magnet w/ IDHS™ • Single Ferrite Magnet


1”(25mm) Aluminum Dome w/ Neodymium Motor and DDC™ External Audiophile Grade Component Crossover w/ 5% (Tol) Parts Butyl Rubber w/ VAST™ Injection Molded Polypropylene-Carbon Fiber Blend w/ Machined Aluminum Phase Plug StampCastTM w/ FlexFitTM Single Ferrite Magnet

1”(25mm) Treated Fabric Dome w/ Neodymium Motor and DDC™ External Audiophile Grade Component Crossover w/ 5% (Tol) Parts Butyl Rubber w/ VAST™ Injection Molded Polypropylene-Carbon Fiber Blend StampCastTM w/ FlexFitTm

MATERIAL HIEARCHY

Single Ferrite Magnet

BESt

GOOD

• • • •

TWEETER

Liquid Crystal Polymer Fiber Aluminum Dome Treated Fabric Dome Plated Polyether Imide (PEI) Dome • Mylar Balanced Dome

CROSSOVER

• RFLink™ Equipped External Component Crossover w/ 1% Mil-Spec Parts • External Component Crossover w/ 5% (Tol) Parts • ICC™ Component Crossover w/ 5% (Tol) Parts • ICC™ Component Crossover w/ 10% (Tol) Parts • Integrated High-Pass Crossover

SURROUND

• Butyl rubber w/ VAST™ • Nitrile Butadiene Rubber w/ VAST™ • Nitrile Butadiene Rubber • W-Style, Treated Cloth • SPE Foam


1”(25mm) Plated Polyether Imide (PEI) Dome w/ Neodymium Motor and DDC™ ICC™ Component Crossover w/ 10% (Tol) Parts Nitrile Butadiene Rubber w/ VAST™ Injection Molded Mineral Filled Polypropylene StampCastTM w/ FlexFitTM Single Ferrite Magnet

1”(25mm) Mylar Balanced Dome Integrated High-Pass Crossover SPE Foam Vacuum Formed Polypropylene Stamped Steel Single Ferrite Magnet

CONE

• Liquid Crystal Polymer Fiber • Injection Molded Polypropylene-carbon Fiber Blend • Injection Molded Mineral Filled Polypropylene • Vacuum Formed Polypropylene • Fiber Reinforced Paper

BASKET

• Die-Cast Aluminum w/ FlexFitTM • StampCastTM w/ FlexFitTM • Stamped Steel

MAGNET

• Multi-pole™ Dual Neodymium Magnet w/ IDHS™ • Neodymium Magnet w/ IDHS™ • Single Ferrite Magnet


1”(25mm) Aluminum Dome w/ Neodymium Motor ICC™ Component Crossover w/ 5% (Tol) Parts Butyl Rubber w/ VAST™ Injection Molded Polypropylene-Carbon Fiber Blend StampCastTM w/ FlexFitTM Single Ferrite Magnet

1”(25mm) Plated Polyether Imide (PEI) Dome w/ Neodymium Motor and DDC™ ICC™ w/ 10% (Tol) Parts Nitrile Butadiene Rubber w/ VAST™ Injection Molded Mineral Filled Polypropylene StampCastTM w/ FlexFitTM

MATERIAL HIEARCHY

Single Ferrite Magnet

BESt

GOOD

• • • •

TWEETER

Liquid Crystal Polymer Fiber Aluminum Dome Treated Fabric Dome Plated Polyether Imide (PEI) Dome • Mylar Balanced Dome

CROSSOVER

• RFLink™ Equipped External Component Crossover w/ 1% Mil-Spec Parts • External Component Crossover w/ 5% (Tol) Parts • ICC™ Component Crossover w/ 5% (Tol) Parts • ICC™ Component Crossover w/ 10% (Tol) Parts • Integrated High-Pass Crossover

SURROUND

• Butyl rubber w/ VAST™ • Nitrile Butadiene Rubber w/ VAST™ • Nitrile Butadiene Rubber • W-Style, Treated Cloth • SPE Foam


1/2”(13mm) Embedded Phase Coherent Mylar Balanced Dome Integrated High-Pass Crossover Nitrile Butadiene Rubber Vacuum Formed Polypropylene Stamped Steel Single Ferrite Magnet

1.5”(38mm) Horn Design External Audiophile Grade Component Crossover w/ 5% (Tol) Parts W-Style, Treated Cloth Fiber Reinforced Paper w/ Machined Aluminum Phase Plug StampCastTM w/ FlexFitTM Single Ferrite Magnet

CONE

• Liquid Crystal Polymer Fiber • Injection Molded Polypropylene-carbon Fiber Blend • Injection Molded Mineral Filled Polypropylene • Vacuum Formed Polypropylene • Fiber Reinforced Paper

BASKET

• Die-Cast Aluminum w/ FlexFitTM • StampCastTM w/ FlexFitTM • Stamped Steel

MAGNET

• Multi-pole™ Dual Neodymium Magnet w/ IDHS™ • Neodymium Magnet w/ IDHS™ • Single Ferrite Magnet


Frequency Response

Sensitivity (1W/1M)

Sensitivity (2.83V/1M)

45Hz-40kHz

88.5dB

91.5dB

T3652-S

6.5”

1”

125 watts

250 watts

48Hz-24kHz

87dB

90dB

2.48”

T252-S

5.25”

1”

75 watts

150 watts

65Hz-22kHz

87dB

90dB

1.97”

T2652-S

6.5”

1”

100 watts

200 watts

50Hz-22kHz

88dB

91dB

2.48”

T2T-S

N/A

1”

100 watts

200 watts

3kHz-22kHz

90dB

93dB

*0.91”

T152-S

5.25”

1”

75 watts

150 watts

65Hz-22kHz

87dB

90dB

1.99”

2.48”

Butyl rubber with VAST™

Tri-laminate Liquid Crystal Polymer Fiber w/ machined copper phase plug

Nomex™ w/ balanced stitched woven embedded fiber/flat lead wires

Die-cast aluminum with FlexFit™

Butyl rubber with VAST™

Woven Liquid Crystal Polymer Fiber™

Nomex™ w/ balanced stitched woven embedded fiber/flat lead wires

Die-cast aluminum with FlexFit™

Butyl rubber with VAST™

Injection molded Polypropylene-carbon fiber blend w/ machined aluminum phase plug

Fatigue resistant poly-cotton linear spider w/ woven fiber reinforced lead wire

StampCast™ with Flex-fit™

Fatigue resistant poly-cotton linear spider w/ woven fiber reinforced lead wire

StampCast™ with Flex-fit™

T16-S

6.0”

1”

80 watts

160 watts

60Hz-22kHz

86dB

89dB

1.93”

T165-S

6.5”

1”

80 watts

160 watts

60Hz-22kHz

86dB

89dB

1.93”

T1675-S

6.75”

1”

100 watts

200 watts

55Hz-22kHz

89dB

92dB

2.51”

T1T-S

N/A

1”

100 watts

200 watts

3kHz-22kHz

90dB

93dB

*0.91”

T142

4”

0.75”

40 watts

80 watts

85Hz-22kHz

86dB

89dB

1.79”

T152

5.25”

1”

60 watts

120 watts

65Hz-22kHz

86.5dB

89.5dB

1.99”

T16

6.0”

1”

70 watts

140 watts

65Hz-22kHz

88dB

91dB

1.93”

T165

6.5”

1”

70 watts

140 watts

65Hz-22kHz

88dB

91dB

1.93”

T1675

6.75”

1”

75 watts

150 watts

50Hz-22kHz

89dB

92dB

2.51”

T1462

4”x6”

0.75”

45 watts

90 watts

75Hz-22kHz

85.5dB

88.5dB

2.00”

T1572

5”x7”

1”

70 watts

140 watts

60Hz-22kHz

87dB

90dB

2.35”

T1682

6”x8”

1”

80 watts

160 watts

55Hz-22kHz

88dB

91dB

2.60”

T1692

6”x9”

1”

100 watts

200 watts

50Hz-22kHz

90dB

93dB

3.39”

T1693

6”x9”

1”

100 watts

200 watts

50Hz-22kHz

91dB

94dB

3.39”

P152-S

5.25”

1”

50 watts

100 watts

70Hz-22kHz

87dB

90dB

1.91”

P16-S

6.0”

1”

60 watts

120 watts

60Hz-22kHz

87.2dB

90.2dB

1.93”

P165-S

6.5”

1”

60 watts

120 watts

60Hz-22kHz

87.2dB

90.2dB

1.93”

P1675-S

6.75”

1”

60 watts

120 watts

55Hz-22kHz

89dB

92dB

2.24”

P1T-S

N/A

1”

60 watts

120 watts

3.5kHz-22kHz

90dB

93dB

*0.91”

P132

3.5”

0.5”

20 watts

40 watts

120Hz-22kHz

85dB

88dB

1.46”

P142

4”

0.75”

30 watts

60 watts

100Hz-22kHz

86.5dB

89.5dB

1.75”

P152

5.25”

0.75”

40 watts

80 watts

70Hz-22kHz

87dB

90dB

1.91”

P16

6.0”

0.75”

55 watts

110 watts

65Hz-22kHz

88dB

91dB

1.93”

P165

6.5”

0.75”

55 watts

110 watts

65Hz-24kHz

88dB

91dB

1.93”

P1675

6.75”

0.75”

60 watts

120 watts

60Hz-24kHz

89dB

92dB

2.24”

P1462

4”x6”

0.75”

35 watts

70 watts

90Hz-22kHz

87.5dB

90.5dB

1.89”

P1572

5”x7”

0.75”

60 watts

120 watts

75Hz-22kHz

89dB

92dB

2.30”

P1683

6”x8”

0.75”

65 watts

130 watts

65Hz-24kHz

90dB

93dB

2.32”

P1692

6”x9”

0.75”

75 watts

150 watts

60Hz-22kHz

91dB

94dB

3.07”

P1694

6”x9”

0.75”

75 watts

150 watts

60Hz-24kHz

91dB

94dB

3.07”

PPS4-6

6.5”

N/A

100 watts

200 watts

85Hz-5kHz

92.5dB

95.5dB

2.24”

PPS8-6

6.5”

N/A

100 watts

200 watts

87Hz-5kHz

91.5dB

94.5dB

2.24”

PPS4-8

8.0”

N/A

125 watts

250 watts

80Hz-5kHz

94.5dB

97.5dB

2.91”

PPS8-8

8.0”

N/A

125 watts

250 watts

82Hz-5kHz

93dB

96dB

2.91”

63 2013 BUYERS GUIDE

Frame Structure

Spider

Peak Power Handling (watts) 300 watts

Cone Material

RMS Power Handling (watts) 150 watts

Surround Material

Tweeter Size 1”

Mounting Depth

Speaker Size

SPEAKER SPECIFICATIONS

6.5”

T5652-S

Aluminum dome w/ integral suspension & tuned chamber Butyl rubber with VAST™

Injection molded Polypropylene-carbon fiber blend

Treated fabric dome w/ integral suspension & tuned chamber Butyl rubber with VAST™

Injection molded Polypropylene-carbon fiber blend

Fatigue resistant poly-cotton linear spider w/ woven fiber reinforced lead wire

StampCast™ with Flex-fit™

Nitrile Butadiene Rubber with VAST™

Injection molded mineral filled Polypropylene

Fatigue resistant poly-cotton linear spider w/ woven fiber reinforced lead wire

StampCast™ with Flex-fit™

Plated Polyether Imide (PEI) dome Nitrile Butadiene Rubber with VAST™

Injection molded mineral filled Polypropylene

Fatigue resistant poly-cotton linear spider w/ woven fiber reinforced lead wire

StampCast™ with Flex-fit™

W-Style, Treated Cloth

Fiber reinforced paper w/ machined aluminum phase plug

Fatigue resistant polycotton linear spider w/ woven lead wire

StampCast™ with Flex-fit™


Terminal Connectors

Accessories Cat 5 remote extension cable, grilles and mounting hardware

Neodymium magnet w/ IDHS™

1"(25mm) Liquid Crystal Polymer Fiber™ dome w/ neodymium magnet and DDC™

External audiophile grade component crossover w/ 5% (Tol) parts

3-way connection terminal

Grilles and mounting hardware

1”(25mm) aluminum dome w/ neodymium motor and DDC™

External audiophile grade component crossover w/ 5% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

18 Ga. Pigtail

Flush w/ DDC™, surface and angle mounting hardware

External audiophile grade component crossover w/ 5% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

External audiophile grade component crossover w/ 5% (Tol) parts

18 Ga. Pigtail

Flush w/ DDC™, surface and angle mounting hardware

Ferrite magnet structure

Removable Semi-flexible Polyvinyl Chloride

Crossover

3-way connection terminal

Tweeter

Single chassis stereo w/ audiophile 1% mil-spec components and dual micro-controller for intelligent protection w/ integrated/remote tuning module and RFLink™ equipped

Motor Cover

1"(25mm) Liquid Crystal Polymer Fiber ring radiator dome, dual neodymium magnets w/ IDHS™, low resonant chamber and DDC™

Motor Structure Multi-pole™ dual neodymium magnet w/ IDHS™

Neodymium

Ferrite magnet structure

Removable Semi-flexible Polyvinyl Chloride

1”(25mm) treated fabric dome w/ neodymium motor and DDC™

Neodymium

Ferrite magnet structure

Removable Semi-flexible Polyvinyl Chloride

1”(25mm) aluminum dome w/ neodymium motor and DDC™

ICC™ component crossover with 5% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

Ferrite magnet structure

Removable Semi-flexible Polyvinyl Chloride

1”(25mm) plated Polyether Imide (PEI) dome w/ neodymium motor and DDC™

ICC™ component crossover with 10% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

External component crossover w/ 10% (Tol) parts

18 Ga. Pigtail

Flush w/ DDC™, surface and angle mounting hardware

Neodymium Ferrite magnet structure

Removable Semi-flexible Polyvinyl Chloride

3/4”(20mm) pole mounted plated Polyether Imide (PEI) dome w/ neodymium motor

ICC™ with 10% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

Ferrite magnet structure

Removable Semi-flexible PVC

N/A

ICC™ with 10% (Tol) parts

12 Ga. compression style

Grilles and mounting hardware

*Flush Mount


Frequency Response

Sensitivity (1W/1M)

Sensitivity (2.83V/1M)

700watts

40Hz-3kHz

95dB

98dB

PPS8-10

10.0”

N/A

350 watts

700watts

40Hz-3kHz

95dB

98dB

4.17”

PP4-T

N/A

1.5”

50 watts

100 watts

3kHz-20kHz

103dB

106dB

2.59”

PP8-T

N/A

1.5”

50 watts

100 watts

3kHz-20kHz

103dB

106dB

2.59”

R152-S

5.25”

1”

40 watts

80 watts

58Hz-20kHz

85dB

88dB

1.91”

R16-S

6.0”

1”

40 watts

80 watts

60Hz-20kHz

89dB

92dB

1.97”

R165-S

6.5”

1”

40 watts

80 watts

60Hz-20kHz

89dB

92dB

1.97”

R1675-S

6.75”

1”

40 watts

80 watts

55Hz-20kHz

89dB

92dB

2.00”

R1T-S

N/A

1”

40 watts

80 watts

2.5kHz-22kHz

72.5dB

75.5dB

*0.76”

R14X2

4”

0.5”

30 watts

60 watts

100Hz-20kHz

85dB

88dB

1.72”

R1525X2

5.25”

0.5”

40 watts

80 watts

62Hz-20kHz

88dB

91dB

1.93”

4.17”

W-Style, Treated Cloth

Fiber reinforced paper w/ machined aluminum phase plug

Fatigue resistant polycotton linear spider w/ woven lead wire

StampCast™ with Flex-fit™

N/A

N/A

N/A

Die-cast aluminum with FlexFit™

SPE Foam

Vacuum formed PP

Fatigue resistant spider

Stamped steel

Fatigue resistant spider

Stamped steel

R165X3

6.5”

0.5”

45 watts

90 watts

52Hz-20kHz

91dB

94dB

2.15”

R1675X2

6.75”

0.5”

45 watts

90 watts

52Hz-20kHz

91dB

94dB

2.19”

R168X2

6”x8”

0.5”

55 watts

110 watts

51Hz-20kHz

87dB

91dB

2.54”

R169X2

6”x9”

0.5”

65 watts

130 watts

48Hz-20kHz

90dB

93dB

2.85”

R169X3

6”x9”

0.5”

65 watts

130 watts

47Hz-20kHz

90dB

93dB

2.85”

65 2013 BUYERS GUIDE

Frame Structure

Spider

Peak Power Handling (watts)

350 watts

Cone Material

RMS Power Handling (watts)

N/A

Surround Material

Tweeter Size

10.0”

Mounting Depth

Speaker Size PPS4-10

Mylar balanced dome Nitrile Butadiene Rubber

Vacuum formed Polypropylene


Motor Structure

Motor Cover

Tweeter

Crossover

Terminal Connectors

Accessories

Ferrite magnet structure

Removable Semi-flexible PVC

N/A

ICC™ with 10% (Tol) parts

12 Ga. compression style

Grilles and mounting hardware

Ferrite magnet structure

N/A

1.5”(38mm) horn design

ICC™ with 10% (Tol) parts

12 Ga. compression style

Mounting hardware

Ferrite magnet structure

N/A

1”(25mm) mylar balanced dome

Integrated high-pass crossover

Standard spade connector

Grilles and mounting hardware

18 Ga. Pigtail

Flush, surface and angle mounting hardware

Standard spade connector

Grilles and mounting hardware

Ferrite magnet structure

N/A

1/2”(13mm) Embedded Phase Coherent mylar balanced dome

Integrated high-pass crossover

1/2”(13mm) pole mounted mylar balanced dome

*Flush Mount

ROCKFORDFOSGATE.COM Don’t forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Woofer Box Advisor for optimized enclosure bass performance.


MARINE


AMPLIFIERS

BRING YOUR SYSTEM TO LIFE & CRANK IT

SUBWOOFERS MAKE WAVES WITH HUGE BASS, ANY PLACE

SPEAKERS

ROCKING THE LATEST SINGLE NOT MOTOR DRONE

SOURCE UNITS MP3, CD, OR MOBILE DEVICE...PLUG-IN & GO


AMPLIFIERS 750WATTS 1200WATTS

69 2013 BUYERS GUIDE

SUBWOOFERS 400WATTS 600WATTS

SINGLE 4立


OPTIONAL COLOR SUBS | SPEAKERS | WAKE TOWER ENCLOSURE

SPEAKERS 2WAY 6.5 Inch 8.0 Inch


RFX5000

SOURCE UNITS

RFX9700CD

RFX9900DM


RFXMR5BB

RFXMR7

RFXMR8

RFXMR6

REMOTES

RFX30

RFX33SD RFXBT

ACCESSORIES


PROPRIETARY

ROCKFORD TECHNOLOGY

When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has lead us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and make it Rockford. M2 MARINE GRADE Rockford’s M2 marine grade standard takes into account the devastating effects of the outdoor environment and takes extreme measures to ensure optimum performance.

MARINE GRADE

• 100% UV stable CENTREX® injection molded plastic • Corrosion resistant gold plated polarized terminals • Injection molded polypropylene cone with UV inhibitors • Internal full magnetic shielding • Stainless steel grilles and mounting hardware • UV and salt fog resistant thermo-plastic elastomer surround

ASTM B117 – SALT/FOG & D4329 – UV TEST STANDARDS ASTM B117 salt/fog test standard provides accelerated aging in a controlled corrosive environment to produce relative corrosion resistance information for specimens of metals and coated metals. ASTM D4329 test standard is intended to induce property changes associated with end-use conditions, including the effects of sunlight, moisture, and heat.

CEA-2031 Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous demand, not instantaneous power handling that over time can damage voice coils.

CEA-2006 Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier’s output power ratings are REAL POWER numbers, not inflated marketing ratings.

73 2013 BUYERS GUIDE


VERTICAL ATTACH SURROUND TECHNIQUE U.S. Patent (Patent Pending)

Rockfordâ&#x20AC;&#x2122;s proprietary surround technique,VAST, provides up to a 25% increase in the speakers effective radiating cone area without complicated installation issues. This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing) which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved.

FLEX FIT The slot mounted frame pattern of the Flex Fit basket utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted.

INTEGRATED CONCEALED CROSSOVER The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier installation.

YOUTUBE.COM/ROCKFORDFOSGATE WATCH DETAILED VIDEOS ON OUR MARINE PRODUCTS.


Dimensions

Topology

Circuit Board

Variable Crossover 12 dB/oct - variable Low Pass

>50dB

H 2.0” x W 6.8” x L 11.1”

M750-1D

250x1 @ 4 ohms 500x1 @ 2 ohms 750x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

H 2.0” x W 6.8” x L 9.1”

M1200-1D

400x1 @ 4 ohms 800x1 @ 2 ohms 1200x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

H 2.0” x W 6.8” x L 11.1”

1.25 cu ft. Port: (1) 4”x8.52” *Infinite Baffle compatible

Tall profile, Santoprene™ with VAST™

Injection molded Polypropylene

M212S4/M212S4B

12”

Single 4 Ω

12

87 dB

300

600

11.25"

6.58"

0.258

1.00”

1.50 cu ft. Port: (1) 3”x5.7 4” *Infinite Baffle compatible

M262/M262B

6.5”

1”

75 watts

150 watts

53Hz-22kHz

88dB

91dB

2.80”

M282/M282B

8”

1”

100 watts

200 watts

48Hz-22kHz

90dB

93dB

3.42”

Ultraviolet & salt-fog resistant Thermo-Plastic Elastomer

Injection molded, parabolic shape mineral filled Polypropylene w/ UV inhibitors

Speaker Model

Nominal Impedance

RMS Power Handling

Peak Power Handling

Dimensions (HxWxD)

M262-WAKE/M262B-WAKE

(1pair) M262 or M262B

75 Watts

150 Watts

10.96" x 7.03" x 11.26"

M282-WAKE/M282B-WAKE

(1pair) M282 or M282B

100 Watts

200 Watts

13.25" x 9.06" x 13.09"

75 2013 BUYERS GUIDE

Frame Structure

0.75”

Spider

0.154

Cone Material

5.54"

Surround Material

9.13"

Mounting Depth

500

Sensitivity (2.83V/1M)

250

Sensitivity (1W/1M)

86 dB

Frequency Response

10

Peak Power Handling (watts)

Single 4 Ω

RMS Power Handling (watts)

10”

Tweeter Size

M210S4/M210S4B

Speaker Size

Dustcap Material

>90dB

*Surround Material

150mV - 5V

Ported Enclosure

<0.1%

Sealed Enclosure (cu. ft.)

20Hz - 20kHz

Speaker Displacement (cu. ft.)

100x4 @ 4 ohms 150x4 @ 2 ohms 300x2 @ 4 ohms bridged

Mounting Depth

M600-4D

Mounting Diameter

>50dB

Peak Power Handling (watts)

>90dB

RMS Power Handling (watts)

150mV - 5V

Sensitivity

<0.1%

Xmax (mm)

20Hz - 20kHz

Nominal Impedance

Channel Separation

Conformal coated 4 layer 2 oz. copper circuit board

S/N Ratio

Class d

Input Sensitivity

12 dB/oct - variable High or Low Pass and All Pass

THD+N @ Rated Power

Conformal coated 4 layer 2 oz. copper circuit board

Frequency Response

Full Range Class d

75x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged

Speaker Size

Rated Power

H 2.0” x W 6.8” x L 9.1”

M400-4D

Moisture, tear and fatigue resistant aramid fiber spider

Injection molded 100% UV stable Centrex® w/ Flex-fit™


Additional Features

1 ohm mono rated

• Short Circuit • Thermal

LED Power and Protection indicators

Focused mass die-cast heatsink

RCA input and RCA pass thru

4 Ga. set-screw connector

10 Ga. set-screw connector

Punch EQ variable from 0dB to +18dB @ 45Hz with optional PEQ level control and infrasonic filter

Tweeter

Injection molded 100% Ultraviolet stable Centrex®

1”(25mm) bridge mounted coated aluminum alloy dome tweeter

Description

Shielded ferrite magnet structure with extended vented pole and bumped backplate.

Sealed Centrex™ motor cover

Proprietary gold plated compression terminal. 8 Ga.

Water draining Centrex™ trim ring with integrated stainless steel grille

ICC™ component crossover with 10% (Tol) parts

Features

Accessories

Motor Cover

Ferrite magnet structure

Centrex™

Terminal Connectors

Tear & fatigue resistant Nomex™ blend spider with multipoint stitched lead wire technique.

Crossover

2" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Motor Structure

Injection molded Polypropylene

Trim Ring

Speaker Terminals

Punch EQ variable from 0dB to +18dB @ 45Hz

Terminal Connectors

Power Terminals

10 Ga. set-screw connector

Motor Cover

RCA Inputs

4 Ga. set-screw connector

Motor Structure

Heatsink Design

RCA input and RCA pass thru

Frame Structure

Status Indicators

Focused mass die-cast heatsink

Spider

Protection

LED Power and Protection indicators

Voice Coil

Impedance Stability

• Short Circuit • Thermal

Cone Material

2 ohm stereo / 4 ohm mono rated

Corrosion resistant gold plated polarized input terminals w/ a spare terminal set for optional additional tweeters

Removable Centrex® trim ring w/ 18 gauge corrosion resistant integrated/removable stainless steel grille and mounting hardware

Dimensions

Flip down AM/FM Stereo CD Player 40 watts x 4

AM/FM Tuner, Disc Player, MP3, SiriusXM Ready, Made for iPod, USB Input, SD card

DIN size chassis with 1.5 DIN face

Digital Media Receiver 40 watts x 4

AM/FM Tuner, MP3, SiriusXM Ready, Made for iPod, USB Input, BLUETOOTH

DIN size chassis with 1.8 DIN face

RFX3000

Hide-away box w/ AM/FM Stereo for RFXMR5BB 50 watts x 4

AM/FM Tuner, SiriusXM Ready, iPod Support, USB Input, AUX Input, Video In/Out, Dual Zone, Disc Changer Ready

H 2.50” x W 6.875” x L 8.375”

RFX5000

Hide-away box w/ AM/FM Stereo for RFXMR5BB 50 watts x 4

AM/FM Tuner, SiriusXM Ready, iPod Support, USB Input, AUX Input, Video In/Out, Dual Zone, Disc Changer Ready, BLUETOOTH ready

H 2.50” x W 6.875” x L 8.375”

Waterproof wired remote w/ digital display for RFX3000 & RFX5000

3-Line LCD Display, Full Function Control

H 3.90” x W 6.70” x D 0.70”

RFXMR6

Waterproof wired remote for RFX3000, RFX5000 RFX9700CD & RFX9900DM

Full Function Control

Overall Diameter 2.5” (64mm) (Mounting Diameter 2.2” (55mm), Depth .5” (12.5mm))

RFXMR7

Waterproof wired remote w/ digital display for RFX3000,RFX5000, RFX9700CD & RFX9900DM

Capactive Touch LCD Display, Full Function Control

Overall Diameter 3.5” (90mm) (Mounting Diameter 3” (76mm), Depth 1.1” (29mm))

RFXMR8

Waterproof wired remote w/ digital display for RFX3000,RFX5000, RFX9700CD & RFX9900DM

Full Function Control w/ LCD Display

Overall Diameter 3.5” (90mm) (Mounting Diameter 3” (76mm), Depth 1.1” (29mm))

RFX9700CD

RFX9900DM

RFXMR5BB

RFX10 RFX16

IPODEC

RFX30

RFX33SD

RFXBT

10 foot 5-Pin Mini DIN extension cable for RFXMR5BB

10 FT

16 foot 8-Pin DIN extension cable for RFXMR6, RFXMR7, RFXMR8

16 FT

9-Pin mini DIN to 30-Pin Apple connector for use with RFX30 & RFX33SD

6 FT

USB and 3.5mm input socket for use with RFX3000 & RFX5000

Overall Diameter 2” (49mm) w/ 6 FT cable (Mounting Diameter 1.5” (37mm), Depth 1.1” (28mm))

USB, 3.5mm, SD card, iPod input socket for use with RFX5000 & RFX9900DM

Overall Diameter 2” (49mm) w/ 6 FT cable (Mounting Diameter 1.5” (37mm), Depth 1.1” (28mm))

Bluetooth dongle for use with RFX5000

Receiver: 1.08” (27mm) x 2.06” (52mm) x 0.5” (13mm) Cable: 9.33” (237mm)


VEHICLE INTEGRAT


TION

DIGITAL PROCESSORS ULTIMATE SIGNAL MANAGEMENT

SIGNAL CONVERTERS HIGH TO LOW...GOOD TO GO

POWERED LOADED THE QUICK AND EASY SOLUTION FOR BASS

ACCESSORIES THE LIFE LINE TO ANY SYSTEM


DIGITAL PROCESSORS PROPRIETARY 3SIXTY TECHNOLOGY

When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has lead us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and make it Rockford.

®

BLUETOOTH®

A2DP wireless audio streaming via the included dongle allows you to listen to audio from any BLUETOOTH enabled device.

RF LINK

Rockford’s proprietary RF Link is a bus-power component connection system enabling integration and control of all RF Link equipped products. The use of this system allows for the expansion of auxiliary controls and managed system turn on.

FREQUENCY NORMALIZATION OF AUDIO SIGNALS U.S. Patent (7,778,718,B2)

Frequency normalization is achieved by characterizing the frequency response of the audio source based on a reference input signal. This reference input signal is used to establish a reference frequency response, which is stored in memory and used to select equalizer settings. The system restores missing spectral content by summing multiple input signals from the audio source. The system then normalizes the frequency response based on characterizations of the signal by utilizing equalizer settings from memory.

3SIXTY GRAPHIC USER INTERFACE (GUI)

3Sixty interactive graphic user interface allows for control of the crossover type, slope, high/low pass filter, the 248 band parametric eq, phase, and time delay.

79 2013 BUYERS GUIDE

INPUT CHANNEL CONFIGURATOR

OUTPUT CHANNEL CONFIGURATOR

CHANNEL SUMMING CONFIGURATOR

ADJUSTING INPUT GAIN


3 S I X T Y. 3 S I G N A L P R O C E S S O R The new 3sixty.3 interactive signal processor is the perfect solution for those customers who want to add aftermarket equipment to their factory source unit, integrate their mobile devices, or have complete control over their audio signal. With features like Bluetooth streaming, selectable crossover types and a USB interface, the versatility is endless.

3SIXTY.3

3SIXTY.3

Input/Output

AUX Inputs

Input Voltage

Output Voltage

8 Speaker/RCA Balanced/Unbalanced

Stereo/Digital (SPDIF)

2V-24V

8V RMS Unbalanced/Balanced

Auto Turn-On 6V DC Offset

Remote

Dimensions

Master or Sub Level/ PEQ/ EQ Presets/ Input

H 1.75” x W 5.125” x L 9.25”

D A 2 D I G I TA L & A N A L O G P R E - A M P

The DA2 provides a connection between the MOST system in the vehicle with any aftermarket digital or analog amplifier. Providing 8 channels of RCA analog outputs, a digital Toslink output, and an amplifier turn on/off control. With full retention of the factory controls (volume, balance, fader, and equalizer).

M1000-M-DA2

Visit for Vehicle Compatibility http://www.mobridge.us/compatibility/vehicles


3SIXTY SIGNALCONVERTERS SIGNAL PROCESSORS / POWERED LOADED BALANCED LINE DRIVER

Rockford’s 2 channel Balanced Line Driver improves the performance of any aftermarket or factory radio. Designed to eliminates system noise and compatible with high level (speaker) inputs or low level (RCA) inputs.

RF-BLD

HIGH TO LOW CONVERT

What happens when your radio isn’t equipped with RCA inputs? Rockford offers high (speaker) to low (RCA) level converters in 2 or 4 channel versions.

RF-HLC4

RCA TO SPEAKER WIRE ADAPTER Bought an amplifier without high level inputs or looking to adapt speaker wire to an RCA connectors...these adapters allow you to quickly connect speaker wire to female or male RCA ends. RFIF2SW

Input/Output

AUX Inputs

Input Voltage Output Voltage

Auto Turn-On

Remote

Dimensions

2 Speaker/RCA Balanced/Unbalanced

N/A

650mV-10.5V

11V RMS Unbalanced 22V RMS Balanced

6V DC Offset

N/A

H 1.32” x W 5.90” x L 4.09”

RF-HLC4

4 Speaker/4 RCA

N/A

Up to 10.5V

Up to 3v

N/A

N/A

H 1” x W 3” x L 3.5”

RF-HLC

2 Speaker/2 RCA

N/A

Up to 10.5V

Up to 3v

N/A

N/A

H 1” x W 1.56” x L 3.5”

RFI2SW

2 Speaker/2 RCA (MALE)

N/A

N/A

N/A

N/A

N/A

N/A”

RFIF2SW

2 Speaker/2 RCA (FEMALE)

N/A

N/A

N/A

N/A

N/A

N/A

RF-BLD

81 2013 BUYERS GUIDE


PUNCH POWERED LOADED Punch Powered Loaded enclosures are the quick and easy to install bass solution to upgrade your factory or aftermarket stereo system.

With removable power and signal connectors quick connection and disconnection of the Punch bass solution can be made. P300-12

AVAILABLE in 10”or 12” Powered Loaded Solutions Three different automatic turn on modes; REM (+12V), DC Offset, and Audio Signal. Integrated grille included.

Speaker Size P300-10 P300-12

Rated Power

Signal Input

10”

300 watts RMS/ 600 watts PEAK

Low-Level (RCA) or High-Level (Speaker)

12”

300 watts RMS/ 600 watts PEAK

Low-Level (RCA) or High-Level (Speaker)

Auto Turn-On

Remote

Dimensions

12v REM, 6V DC

Offset, Audio Signal

Included Punch Level Control (PLC)

H 13.3” x W 18.38” x L 9.37”

12v REM, 6V DC Offset, Audio Signal

Included Punch Level Control (PLC)

H 14.96” x W 20.35” x L 11.5”


RF ACCESSORIES EXCEEDING THE STANDARD

The American Wire Gauge standard was developed to rationalize selecting wire for a particular purpose. In an electronic environment wire size can have a significant impact on performance. Rockford Fosgate products are designed and engineered to perform at a superior level. It is only fitting that the accessories linking them together perform with the same expectation.

THE AMERICAN WIRE GAUGE STANDARD The American Wire Gauge standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge. Rockford Fosgate accessories are all designed and engineered in accordance with the AWG specification.

ANATOMY OF WIRE The construction of wire is broken out into three elements, strands, clusters and bundles. Varying these combinations will directly change the wire gauge and significantly effect the flexibility of the wire.

WIRE SIZE IMPACTS SYSTEM PERFORMANCE The smaller the wire gauge (copper content) the greater the resistance which results in a loss in power to your amplifier(s) and speaker(s), thus creating a poor performing audio system!

ROCKFORDFOSGATE.COM Donâ&#x20AC;&#x2122;t forget to use our Amp Wire Calculator to optimize output with properly sized wire.


4 AWG

8 AWG

RFK1D

RFK4I

RFK8I

RFK1D - Dual Amp Kit RFK1 - Power Only Kit

RFK4D - Dual Amp Kit RFK4X - Complete Kit RFK4i - Power w/ Interconnect Kit RFK4 - Power Only Kit

RFK8X - Complete Kit RFK8i - Power w/Interconnect Kit RFK8 - Power Only Kit

Dual Twisted Pair

Twisted Pair

Coupler

RFK10I

• Couplers

Battery Clamps

Fuses

Terminals

RFDB1

INTERCONNECTS

• Available 3ft - 20ft Length • Y-Adapters

Battery Post Adapters

Fuse Holders

RFFU30

RFT1

RFDGM

RFFANL

RFDB1 - 1/0 AWG +/- Battery Clamp

• ANL Style 500-100A • MAXI Style 100-50A • AGU Style 60-30A

• Set Screw - 1/0 AWG & 4 AWG • Crimp - 1/0 AWG, 4AWG & 8 AWG • Barrier Spades - 4 AWG & 8 AWG

RFDGM - GM Battery Post Adapter RFDGML - GM Battery Post Adapter for Double Stacked Terminals

1/0 AWG

4 AWG

8 AWG

Speaker Wire

RFFANL - Inline ANL or MAXI Fuse Holder RFFAGU - Inline AGU Fuse Holder RFFMAXI - Inline MAXI Fuse Holder RFFDAGU - Fused AGU Distribution Block RFD1 - 1/0 AWG Distribution Block RFD4 - 4 AWG Distribution Block

RFW4R

RFW1R-51

RFW4B

• Red or Black • 51ft Spool

• Red or Black • 100ft Spool

Hybrid

RFC10HB

RFWP12

• 12 AWG, 16 AWG, 18 AWG • 250/1000 ft Spool or Packaged

• Red or Black • 250ft Spool

Electrolytic

RFC10HB - 10 Farad Hybrid Digital Capacitor RFC2D - 2 Farad Hybrid Digital Capacitor

RFW8B

Deadskin

RFC1

RFC1D - 1 Farad Digital Capacitor RFC1 - 1 Farad Capacitor

DISTRIBUTION

RFIS

• Available 3ft - 20ft Length • Y-Adapters

POWER WIRE

RFI-20

RFK10i - Power w/ Interconnect Kit RFK10 - Power Only Kit

RFDS

RFDS - Sound Damping Material 20’ square feet

FOR ADDITIONAL INFORMATION ON ACCESSORIES, PLEASE VISIT ROCKFORDFOSGATE.COM

CAPACITORS / DEADSKIN

RFIT-20

10 AWG

POWER KITS

1/0 AWG

2013 Volume 5.0 Buyer's Guide  

Product features and specifications section of catalog. Contains signal processors, amplifiers, speakers, subwoofers, marine and accessorie...

Read more
Read more
Similar to
Popular now
Just for you